This is the start of the stable review cycle for the 5.15.192 release. There are 64 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 09 Sep 2025 19:55:53 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.192-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.15.192-rc1
Qiu-ji Chen chenqiuji666@gmail.com dmaengine: mediatek: Fix a flag reuse error in mtk_cqdma_tx_status()
Aaron Kling webgeek1234@gmail.com spi: tegra114: Use value to check for invalid delays
Taniya Das quic_tdas@quicinc.com clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
Ian Rogers irogers@google.com perf bpf-event: Fix use-after-free in synthesis
Michael Walle mwalle@kernel.org drm/bridge: ti-sn65dsi86: fix REFCLK setting
Larisa Grigore larisa.grigore@nxp.com spi: spi-fsl-lpspi: Reset FIFO and disable module on transfer abort
Larisa Grigore larisa.grigore@nxp.com spi: spi-fsl-lpspi: Set correct chip-select polarity bit
Larisa Grigore larisa.grigore@nxp.com spi: spi-fsl-lpspi: Fix transmissions when using CONT
Wentao Liang vulab@iscas.ac.cn pcmcia: Add error handling for add_interval() in do_validate_mem()
Takashi Iwai tiwai@suse.de ALSA: hda/hdmi: Add pin fix for another HP EliteDesk 800 G4 model
Li Qiong liqiong@nfschina.com mm/slub: avoid accessing metadata when pointer is invalid in object_err()
Kees Cook kees@kernel.org randstruct: gcc-plugin: Fix attribute addition
Kees Cook kees@kernel.org randstruct: gcc-plugin: Remove bogus void member
Gabor Juhos j4g8y7@gmail.com arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Ronak Doshi ronak.doshi@broadcom.com vmxnet3: update MTU after device quiesce
Jakob Unterwurzacher jakobunt@gmail.com net: dsa: microchip: linearize skb for tail-tagging switches
Pieter Van Trappen pieter.van.trappen@cern.ch net: dsa: microchip: update tag_ksz masks for KSZ9477 family
Qiu-ji Chen chenqiuji666@gmail.com dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()
Hyejeong Choi hjeong.choi@samsung.com dma-buf: insert memory barrier before updating num_fences
Emanuele Ghidoli emanuele.ghidoli@toradex.com gpio: pca953x: fix IRQ storm on system wake up
Luca Ceresoli luca.ceresoli@bootlin.com iio: light: opt3001: fix deadlock due to concurrent flag access
David Lechner dlechner@baylibre.com iio: chemical: pms7003: use aligned_s64 for timestamp
Aaron Kling webgeek1234@gmail.com spi: tegra114: Don't fail set_cs_timing when delays are zero
Alexander Danilenko al.b.danilenko@gmail.com spi: tegra114: Remove unnecessary NULL-pointer checks
Sean Christopherson seanjc@google.com KVM: x86: Take irqfds.lock when adding/deleting IRQ bypass producer
Rafael J. Wysocki rafael.j.wysocki@intel.com cpufreq/sched: Explicitly synchronize limits_changed flag handling
Jann Horn jannh@google.com mm/khugepaged: fix ->anon_vma race
Vitaly Lifshits vitaly.lifshits@intel.com e1000e: fix heap overflow in e1000_set_eeprom
Stanislav Fort stanislav.fort@aisle.com batman-adv: fix OOB read/write in network-coding decode
John Evans evans1210144@gmail.com scsi: lpfc: Fix buffer free/clear order in deferred receive path
Alex Deucher alexander.deucher@amd.com drm/amdgpu: drop hw access in non-DC audio fini
Qianfeng Rong rongqianfeng@vivo.com wifi: mwifiex: Initialize the chan_stats array to zero
Harry Yoo harry.yoo@oracle.com mm: move page table sync declarations to linux/pgtable.h
Harry Yoo harry.yoo@oracle.com x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings()
Ma Ke make24@iscas.ac.cn pcmcia: Fix a NULL pointer dereference in __iodyn_find_io_region()
Cryolitia PukNgae cryolitia@uniontech.com ALSA: usb-audio: Add mute TLV for playback volumes on some devices
Horatiu Vultur horatiu.vultur@microchip.com phy: mscc: Stop taking ts_lock for tx_queue and use its own lock
Horatiu Vultur horatiu.vultur@microchip.com net: phy: mscc: Fix memory leak when using one step timestamping
Kurt Kanzenbach kurt@linutronix.de ptp: Add generic PTP is_sync() function
Qingfang Deng dqfext@gmail.com ppp: fix memory leak in pad_compress_skb
Wang Liang wangliang74@huawei.com net: atm: fix memory leak in atm_register_sysfs when device_register fail
Eric Dumazet edumazet@google.com ax25: properly unshare skbs in ax25_kiss_rcv()
Dan Carpenter dan.carpenter@linaro.org ipv4: Fix NULL vs error pointer check in inet_blackhole_dev_init()
Rosen Penev rosenp@gmail.com net: thunder_bgx: decrement cleanup index before use
Rosen Penev rosenp@gmail.com net: thunder_bgx: add a missing of_node_put
Dan Carpenter dan.carpenter@linaro.org wifi: libertas: cap SSID len in lbs_associate()
Dan Carpenter dan.carpenter@linaro.org wifi: cw1200: cap SSID length in cw1200_do_join()
Felix Fietkau nbd@nbd.name net: ethernet: mtk_eth_soc: fix tx vlan tag for llc packets
Zhen Ni zhen.ni@easystack.cn i40e: Fix potential invalid access when MAC list is empty
Fabian Bläse fabian@blaese.de icmp: fix icmp_ndo_send address translation for reply direction
Miaoqian Lin linmq006@gmail.com mISDN: Fix memory leak in dsp_hwec_enable()
Alok Tiwari alok.a.tiwari@oracle.com xirc2ps_cs: fix register access when enabling FullDuplex
Kuniyuki Iwashima kuniyu@google.com Bluetooth: Fix use-after-free in l2cap_sock_cleanup_listen()
Phil Sutter phil@nwl.cc netfilter: conntrack: helper: Replace -EEXIST by -EBUSY
Wang Liang wangliang74@huawei.com netfilter: br_netfilter: do not check confirmed bit in br_nf_local_in() after confirm
Dmitry Antipov dmantipov@yandex.ru wifi: cfg80211: fix use-after-free in cmp_bss()
Peter Robinson pbrobinson@gmail.com arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3399-pinebook-pro
Pei Xiao xiaopei01@kylinos.cn tee: fix NULL pointer dereference in tee_shm_put
Jiufei Xue jiufei.xue@samsung.com fs: writeback: fix use-after-free in __mark_inode_dirty()
Timur Kristóf timur.kristof@gmail.com drm/amd/display: Don't warn when missing DCE encoder caps
Daniel Borkmann daniel@iogearbox.net bpf: Fix oob access in cgroup local storage
Daniel Borkmann daniel@iogearbox.net bpf: Move bpf map owner out of common struct
Daniel Borkmann daniel@iogearbox.net bpf: Move cgroup iterator helpers to bpf.h
Daniel Borkmann daniel@iogearbox.net bpf: Add cookie object to bpf maps
-------------
Diffstat:
Makefile | 4 +- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 9 +- .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 1 + arch/x86/include/asm/pgtable_64_types.h | 3 + arch/x86/kvm/x86.c | 18 ++- arch/x86/mm/init_64.c | 18 +++ drivers/clk/qcom/gdsc.c | 21 ++-- drivers/dma-buf/dma-resv.c | 5 +- drivers/dma/mediatek/mtk-cqdma.c | 10 +- drivers/gpio/gpio-pca953x.c | 5 + drivers/gpu/drm/amd/amdgpu/dce_v10_0.c | 5 - drivers/gpu/drm/amd/amdgpu/dce_v11_0.c | 5 - drivers/gpu/drm/amd/amdgpu/dce_v6_0.c | 5 - drivers/gpu/drm/amd/amdgpu/dce_v8_0.c | 5 - .../gpu/drm/amd/display/dc/dce/dce_link_encoder.c | 8 +- drivers/gpu/drm/bridge/ti-sn65dsi86.c | 11 ++ drivers/iio/chemical/pms7003.c | 5 +- drivers/iio/light/opt3001.c | 5 +- drivers/isdn/mISDN/dsp_hwec.c | 6 +- drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 20 +-- drivers/net/ethernet/intel/e1000e/ethtool.c | 10 +- drivers/net/ethernet/intel/i40e/i40e_client.c | 4 +- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 10 +- drivers/net/ethernet/xircom/xirc2ps_cs.c | 2 +- drivers/net/phy/mscc/mscc_ptp.c | 34 +++--- drivers/net/ppp/ppp_generic.c | 6 +- drivers/net/vmxnet3/vmxnet3_drv.c | 5 +- drivers/net/wireless/marvell/libertas/cfg.c | 9 +- drivers/net/wireless/marvell/mwifiex/cfg80211.c | 5 +- drivers/net/wireless/marvell/mwifiex/main.c | 4 +- drivers/net/wireless/st/cw1200/sta.c | 2 +- drivers/pcmcia/rsrc_iodyn.c | 3 + drivers/pcmcia/rsrc_nonstatic.c | 4 +- drivers/scsi/lpfc/lpfc_nvmet.c | 10 +- drivers/spi/spi-fsl-lpspi.c | 15 +-- drivers/spi/spi-tegra114.c | 18 ++- drivers/tee/tee_shm.c | 6 +- fs/fs-writeback.c | 9 +- include/linux/bpf-cgroup.h | 5 - include/linux/bpf.h | 134 ++++++++++++++++++--- include/linux/pgtable.h | 16 +++ include/linux/ptp_classify.h | 15 +++ include/linux/vmalloc.h | 16 --- kernel/bpf/arraymap.c | 1 - kernel/bpf/core.c | 83 ++++++++++--- kernel/bpf/syscall.c | 22 ++-- kernel/sched/cpufreq_schedutil.c | 28 ++++- mm/khugepaged.c | 15 ++- mm/slub.c | 7 +- net/atm/resources.c | 6 +- net/ax25/ax25_in.c | 4 + net/batman-adv/network-coding.c | 7 +- net/bluetooth/l2cap_sock.c | 3 + net/bridge/br_netfilter_hooks.c | 3 - net/core/ptp_classifier.c | 12 ++ net/dsa/tag_ksz.c | 22 +++- net/ipv4/devinet.c | 7 +- net/ipv4/icmp.c | 6 +- net/ipv6/ip6_icmp.c | 6 +- net/netfilter/nf_conntrack_helper.c | 4 +- net/wireless/scan.c | 3 +- scripts/gcc-plugins/gcc-common.h | 32 +++++ scripts/gcc-plugins/randomize_layout_plugin.c | 40 ++---- sound/pci/hda/patch_hdmi.c | 1 + sound/usb/mixer_quirks.c | 2 + tools/perf/util/bpf-event.c | 39 ++++-- 66 files changed, 600 insertions(+), 264 deletions(-)
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann daniel@iogearbox.net
[ Upstream commit 12df58ad294253ac1d8df0c9bb9cf726397a671d ]
Add a cookie to BPF maps to uniquely identify BPF maps for the timespan when the node is up. This is different to comparing a pointer or BPF map id which could get rolled over and reused.
Signed-off-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/r/20250730234733.530041-1-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/bpf.h | 1 + kernel/bpf/syscall.c | 6 ++++++ 2 files changed, 7 insertions(+)
diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 4236de05a8e70..dd6a62134e7d1 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -200,6 +200,7 @@ struct bpf_map { struct mutex freeze_mutex; atomic64_t writecnt; bool free_after_mult_rcu_gp; + u64 cookie; /* write-once */ };
static inline bool map_value_has_spin_lock(const struct bpf_map *map) diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index 6f309248f13fc..6d4d08f57ad38 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -31,6 +31,7 @@ #include <linux/bpf-netns.h> #include <linux/rcupdate_trace.h> #include <linux/memcontrol.h> +#include <linux/cookie.h>
#define IS_FD_ARRAY(map) ((map)->map_type == BPF_MAP_TYPE_PERF_EVENT_ARRAY || \ (map)->map_type == BPF_MAP_TYPE_CGROUP_ARRAY || \ @@ -43,6 +44,7 @@ #define BPF_OBJ_FLAG_MASK (BPF_F_RDONLY | BPF_F_WRONLY)
DEFINE_PER_CPU(int, bpf_prog_active); +DEFINE_COOKIE(bpf_map_cookie); static DEFINE_IDR(prog_idr); static DEFINE_SPINLOCK(prog_idr_lock); static DEFINE_IDR(map_idr); @@ -886,6 +888,10 @@ static int map_create(union bpf_attr *attr) if (err < 0) goto free_map;
+ preempt_disable(); + map->cookie = gen_cookie_next(&bpf_map_cookie); + preempt_enable(); + atomic64_set(&map->refcnt, 1); atomic64_set(&map->usercnt, 1); mutex_init(&map->freeze_mutex);
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann daniel@iogearbox.net
[ Upstream commit 9621e60f59eae87eb9ffe88d90f24f391a1ef0f0 ]
Move them into bpf.h given we also need them in core code.
Signed-off-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/r/20250730234733.530041-3-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/bpf-cgroup.h | 5 -- include/linux/bpf.h | 109 ++++++++++++++++++++++++++++++++++--- 2 files changed, 101 insertions(+), 13 deletions(-)
diff --git a/include/linux/bpf-cgroup.h b/include/linux/bpf-cgroup.h index 3536ab432b30c..79c9d3d412cb6 100644 --- a/include/linux/bpf-cgroup.h +++ b/include/linux/bpf-cgroup.h @@ -91,9 +91,6 @@ to_cgroup_bpf_attach_type(enum bpf_attach_type attach_type) extern struct static_key_false cgroup_bpf_enabled_key[MAX_CGROUP_BPF_ATTACH_TYPE]; #define cgroup_bpf_enabled(atype) static_branch_unlikely(&cgroup_bpf_enabled_key[atype])
-#define for_each_cgroup_storage_type(stype) \ - for (stype = 0; stype < MAX_BPF_CGROUP_STORAGE_TYPE; stype++) - struct bpf_cgroup_storage_map;
struct bpf_storage_buffer { @@ -545,8 +542,6 @@ static inline int bpf_percpu_cgroup_storage_update(struct bpf_map *map, #define BPF_CGROUP_RUN_PROG_SETSOCKOPT(sock, level, optname, optval, optlen, \ kernel_optval) ({ 0; })
-#define for_each_cgroup_storage_type(stype) for (; false; ) - #endif /* CONFIG_CGROUP_BPF */
#endif /* _BPF_CGROUP_H */ diff --git a/include/linux/bpf.h b/include/linux/bpf.h index dd6a62134e7d1..6cf63f4240bdd 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -157,6 +157,107 @@ struct bpf_map_ops { const struct bpf_iter_seq_info *iter_seq_info; };
+enum { + /* Support at most 11 fields in a BTF type */ + BTF_FIELDS_MAX = 11, +}; + +enum btf_field_type { + BPF_SPIN_LOCK = (1 << 0), + BPF_TIMER = (1 << 1), + BPF_KPTR_UNREF = (1 << 2), + BPF_KPTR_REF = (1 << 3), + BPF_KPTR_PERCPU = (1 << 4), + BPF_KPTR = BPF_KPTR_UNREF | BPF_KPTR_REF | BPF_KPTR_PERCPU, + BPF_LIST_HEAD = (1 << 5), + BPF_LIST_NODE = (1 << 6), + BPF_RB_ROOT = (1 << 7), + BPF_RB_NODE = (1 << 8), + BPF_GRAPH_NODE = BPF_RB_NODE | BPF_LIST_NODE, + BPF_GRAPH_ROOT = BPF_RB_ROOT | BPF_LIST_HEAD, + BPF_REFCOUNT = (1 << 9), + BPF_WORKQUEUE = (1 << 10), + BPF_UPTR = (1 << 11), + BPF_RES_SPIN_LOCK = (1 << 12), +}; + +enum bpf_cgroup_storage_type { + BPF_CGROUP_STORAGE_SHARED, + BPF_CGROUP_STORAGE_PERCPU, + __BPF_CGROUP_STORAGE_MAX +#define MAX_BPF_CGROUP_STORAGE_TYPE __BPF_CGROUP_STORAGE_MAX +}; + +#ifdef CONFIG_CGROUP_BPF +# define for_each_cgroup_storage_type(stype) \ + for (stype = 0; stype < MAX_BPF_CGROUP_STORAGE_TYPE; stype++) +#else +# define for_each_cgroup_storage_type(stype) for (; false; ) +#endif /* CONFIG_CGROUP_BPF */ + +typedef void (*btf_dtor_kfunc_t)(void *); + +struct btf_field_kptr { + struct btf *btf; + struct module *module; + /* dtor used if btf_is_kernel(btf), otherwise the type is + * program-allocated, dtor is NULL, and __bpf_obj_drop_impl is used + */ + btf_dtor_kfunc_t dtor; + u32 btf_id; +}; + +struct btf_field_graph_root { + struct btf *btf; + u32 value_btf_id; + u32 node_offset; + struct btf_record *value_rec; +}; + +struct btf_field { + u32 offset; + u32 size; + enum btf_field_type type; + union { + struct btf_field_kptr kptr; + struct btf_field_graph_root graph_root; + }; +}; + +struct btf_record { + u32 cnt; + u32 field_mask; + int spin_lock_off; + int res_spin_lock_off; + int timer_off; + int wq_off; + int refcount_off; + struct btf_field fields[]; +}; + +/* Non-opaque version of bpf_rb_node in uapi/linux/bpf.h */ +struct bpf_rb_node_kern { + struct rb_node rb_node; + void *owner; +} __attribute__((aligned(8))); + +/* Non-opaque version of bpf_list_node in uapi/linux/bpf.h */ +struct bpf_list_node_kern { + struct list_head list_head; + void *owner; +} __attribute__((aligned(8))); + +/* 'Ownership' of program-containing map is claimed by the first program + * that is going to use this map or by the first program which FD is + * stored in the map to make sure that all callers and callees have the + * same prog type, JITed flag and xdp_has_frags flag. + */ +struct bpf_map_owner { + enum bpf_prog_type type; + bool jited; + bool xdp_has_frags; + const struct btf_type *attach_func_proto; +}; struct bpf_map { /* The first two cachelines with read-mostly members of which some * are also accessed in fast-path (e.g. ops, max_entries). @@ -614,14 +715,6 @@ struct bpf_prog_offload { u32 jited_len; };
-enum bpf_cgroup_storage_type { - BPF_CGROUP_STORAGE_SHARED, - BPF_CGROUP_STORAGE_PERCPU, - __BPF_CGROUP_STORAGE_MAX -}; - -#define MAX_BPF_CGROUP_STORAGE_TYPE __BPF_CGROUP_STORAGE_MAX - /* The longest tracepoint has 12 args. * See include/trace/bpf_probe.h */
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann daniel@iogearbox.net
[ Upstream commit fd1c98f0ef5cbcec842209776505d9e70d8fcd53 ]
Given this is only relevant for BPF tail call maps, it is adding up space and penalizing other map types. We also need to extend this with further objects to track / compare to. Therefore, lets move this out into a separate structure and dynamically allocate it only for BPF tail call maps.
Signed-off-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/r/20250730234733.530041-2-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/bpf.h | 23 +++++++++-------- kernel/bpf/arraymap.c | 1 - kernel/bpf/core.c | 58 ++++++++++++++++++++++++++++++++----------- kernel/bpf/syscall.c | 16 ++++++------ 4 files changed, 64 insertions(+), 34 deletions(-)
diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 6cf63f4240bdd..ea6728c304fe0 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -258,6 +258,7 @@ struct bpf_map_owner { bool xdp_has_frags; const struct btf_type *attach_func_proto; }; + struct bpf_map { /* The first two cachelines with read-mostly members of which some * are also accessed in fast-path (e.g. ops, max_entries). @@ -300,6 +301,8 @@ struct bpf_map { }; struct mutex freeze_mutex; atomic64_t writecnt; + spinlock_t owner_lock; + struct bpf_map_owner *owner; bool free_after_mult_rcu_gp; u64 cookie; /* write-once */ }; @@ -1091,16 +1094,6 @@ struct bpf_prog_aux { };
struct bpf_array_aux { - /* 'Ownership' of prog array is claimed by the first program that - * is going to use this map or by the first program which FD is - * stored in the map to make sure that all callers and callees have - * the same prog type and JITed flag. - */ - struct { - spinlock_t lock; - enum bpf_prog_type type; - bool jited; - } owner; /* Programs with direct jumps into programs part of this array. */ struct list_head poke_progs; struct bpf_map *map; @@ -1248,6 +1241,16 @@ static inline bool bpf_map_flags_access_ok(u32 access_flags) (BPF_F_RDONLY_PROG | BPF_F_WRONLY_PROG); }
+static inline struct bpf_map_owner *bpf_map_owner_alloc(struct bpf_map *map) +{ + return kzalloc(sizeof(*map->owner), GFP_ATOMIC); +} + +static inline void bpf_map_owner_free(struct bpf_map *map) +{ + kfree(map->owner); +} + struct bpf_event_entry { struct perf_event *event; struct file *perf_file; diff --git a/kernel/bpf/arraymap.c b/kernel/bpf/arraymap.c index 2788da290c216..dc42970dda975 100644 --- a/kernel/bpf/arraymap.c +++ b/kernel/bpf/arraymap.c @@ -1044,7 +1044,6 @@ static struct bpf_map *prog_array_map_alloc(union bpf_attr *attr) INIT_WORK(&aux->work, prog_array_map_clear_deferred); INIT_LIST_HEAD(&aux->poke_progs); mutex_init(&aux->poke_mutex); - spin_lock_init(&aux->owner.lock);
map = array_map_alloc(attr); if (IS_ERR(map)) { diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index 1ded3eb492b8e..aa3487e244549 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -1832,31 +1832,59 @@ static unsigned int __bpf_prog_ret0_warn(const void *ctx, } #endif
-bool bpf_prog_array_compatible(struct bpf_array *array, - const struct bpf_prog *fp) +static bool __bpf_prog_map_compatible(struct bpf_map *map, + const struct bpf_prog *fp) { - bool ret; + enum bpf_prog_type prog_type = fp->aux->dst_prog ? fp->aux->dst_prog->type : fp->type; + struct bpf_prog_aux *aux = fp->aux; + bool ret = false;
if (fp->kprobe_override) - return false; - - spin_lock(&array->aux->owner.lock); + return ret;
- if (!array->aux->owner.type) { - /* There's no owner yet where we could check for - * compatibility. - */ - array->aux->owner.type = fp->type; - array->aux->owner.jited = fp->jited; + spin_lock(&map->owner_lock); + /* There's no owner yet where we could check for compatibility. */ + if (!map->owner) { + map->owner = bpf_map_owner_alloc(map); + if (!map->owner) + goto err; + map->owner->type = prog_type; + map->owner->jited = fp->jited; + /* Note: xdp_has_frags doesn't exist in aux yet in our branch */ + /* map->owner->xdp_has_frags = aux->xdp_has_frags; */ + map->owner->attach_func_proto = aux->attach_func_proto; ret = true; } else { - ret = array->aux->owner.type == fp->type && - array->aux->owner.jited == fp->jited; + ret = map->owner->type == prog_type && + map->owner->jited == fp->jited; + /* Note: xdp_has_frags check would go here when available */ + /* && map->owner->xdp_has_frags == aux->xdp_has_frags; */ + if (ret && + map->owner->attach_func_proto != aux->attach_func_proto) { + switch (prog_type) { + case BPF_PROG_TYPE_TRACING: + case BPF_PROG_TYPE_LSM: + case BPF_PROG_TYPE_EXT: + case BPF_PROG_TYPE_STRUCT_OPS: + ret = false; + break; + default: + break; + } + } } - spin_unlock(&array->aux->owner.lock); +err: + spin_unlock(&map->owner_lock); return ret; }
+bool bpf_prog_array_compatible(struct bpf_array *array, + const struct bpf_prog *fp) +{ + struct bpf_map *map = &array->map; + return __bpf_prog_map_compatible(map, fp); +} + static int bpf_check_tail_call(const struct bpf_prog *fp) { struct bpf_prog_aux *aux = fp->aux; diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index 6d4d08f57ad38..b80d125dcea97 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -477,6 +477,7 @@ static void bpf_map_free_deferred(struct work_struct *work)
security_bpf_map_free(map); bpf_map_release_memcg(map); + bpf_map_owner_free(map); /* implementation dependent freeing */ map->ops->map_free(map); } @@ -576,17 +577,15 @@ static unsigned long bpf_map_memory_footprint(const struct bpf_map *map)
static void bpf_map_show_fdinfo(struct seq_file *m, struct file *filp) { - const struct bpf_map *map = filp->private_data; - const struct bpf_array *array; + struct bpf_map *map = filp->private_data; u32 type = 0, jited = 0;
- if (map->map_type == BPF_MAP_TYPE_PROG_ARRAY) { - array = container_of(map, struct bpf_array, map); - spin_lock(&array->aux->owner.lock); - type = array->aux->owner.type; - jited = array->aux->owner.jited; - spin_unlock(&array->aux->owner.lock); + spin_lock(&map->owner_lock); + if (map->owner) { + type = map->owner->type; + jited = map->owner->jited; } + spin_unlock(&map->owner_lock);
seq_printf(m, "map_type:\t%u\n" @@ -895,6 +894,7 @@ static int map_create(union bpf_attr *attr) atomic64_set(&map->refcnt, 1); atomic64_set(&map->usercnt, 1); mutex_init(&map->freeze_mutex); + spin_lock_init(&map->owner_lock);
map->spin_lock_off = -EINVAL; map->timer_off = -EINVAL;
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann daniel@iogearbox.net
[ Upstream commit abad3d0bad72a52137e0c350c59542d75ae4f513 ]
Lonial reported that an out-of-bounds access in cgroup local storage can be crafted via tail calls. Given two programs each utilizing a cgroup local storage with a different value size, and one program doing a tail call into the other. The verifier will validate each of the indivial programs just fine. However, in the runtime context the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the BPF program as well as any cgroup local storage flavor the program uses. Helpers such as bpf_get_local_storage() pick this up from the runtime context:
ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx); storage = ctx->prog_item->cgroup_storage[stype];
if (stype == BPF_CGROUP_STORAGE_SHARED) ptr = &READ_ONCE(storage->buf)->data[0]; else ptr = this_cpu_ptr(storage->percpu_buf);
For the second program which was called from the originally attached one, this means bpf_get_local_storage() will pick up the former program's map, not its own. With mismatching sizes, this can result in an unintended out-of-bounds access.
To fix this issue, we need to extend bpf_map_owner with an array of storage_cookie[] to match on i) the exact maps from the original program if the second program was using bpf_get_local_storage(), or ii) allow the tail call combination if the second program was not using any of the cgroup local storage maps.
Fixes: 7d9c3427894f ("bpf: Make cgroup storages shared between programs on the same cgroup") Reported-by: Lonial Con kongln9170@gmail.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/r/20250730234733.530041-4-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/bpf.h | 1 + kernel/bpf/core.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+)
diff --git a/include/linux/bpf.h b/include/linux/bpf.h index ea6728c304fe0..1046f290b4b2b 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -256,6 +256,7 @@ struct bpf_map_owner { enum bpf_prog_type type; bool jited; bool xdp_has_frags; + u64 storage_cookie[MAX_BPF_CGROUP_STORAGE_TYPE]; const struct btf_type *attach_func_proto; };
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index aa3487e244549..73a1c66e54175 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -1837,7 +1837,9 @@ static bool __bpf_prog_map_compatible(struct bpf_map *map, { enum bpf_prog_type prog_type = fp->aux->dst_prog ? fp->aux->dst_prog->type : fp->type; struct bpf_prog_aux *aux = fp->aux; + enum bpf_cgroup_storage_type i; bool ret = false; + u64 cookie;
if (fp->kprobe_override) return ret; @@ -1853,12 +1855,25 @@ static bool __bpf_prog_map_compatible(struct bpf_map *map, /* Note: xdp_has_frags doesn't exist in aux yet in our branch */ /* map->owner->xdp_has_frags = aux->xdp_has_frags; */ map->owner->attach_func_proto = aux->attach_func_proto; + for_each_cgroup_storage_type(i) { + map->owner->storage_cookie[i] = + aux->cgroup_storage[i] ? + aux->cgroup_storage[i]->cookie : 0; + } ret = true; } else { ret = map->owner->type == prog_type && map->owner->jited == fp->jited; /* Note: xdp_has_frags check would go here when available */ /* && map->owner->xdp_has_frags == aux->xdp_has_frags; */ + for_each_cgroup_storage_type(i) { + if (!ret) + break; + cookie = aux->cgroup_storage[i] ? + aux->cgroup_storage[i]->cookie : 0; + ret = map->owner->storage_cookie[i] == cookie || + !cookie; + } if (ret && map->owner->attach_func_proto != aux->attach_func_proto) { switch (prog_type) {
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Timur Kristóf timur.kristof@gmail.com
[ Upstream commit 8246147f1fbaed522b8bcc02ca34e4260747dcfb ]
On some GPUs the VBIOS just doesn't have encoder caps, or maybe not for every encoder.
This isn't really a problem and it's handled well, so let's not litter the logs with it.
Signed-off-by: Timur Kristóf timur.kristof@gmail.com Acked-by: Alex Deucher alexander.deucher@amd.com Reviewed-by: Rodrigo Siqueira siqueira@igalia.com Reviewed-by: Alex Hung alex.hung@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com (cherry picked from commit 33e0227ee96e62d034781e91f215e32fd0b1d512) Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c index 1e77ffee71b30..fce0c5d72c1a0 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c @@ -899,13 +899,13 @@ void dce110_link_encoder_construct( enc110->base.id, &bp_cap_info);
/* Override features with DCE-specific values */ - if (BP_RESULT_OK == result) { + if (result == BP_RESULT_OK) { enc110->base.features.flags.bits.IS_HBR2_CAPABLE = bp_cap_info.DP_HBR2_EN; enc110->base.features.flags.bits.IS_HBR3_CAPABLE = bp_cap_info.DP_HBR3_EN; enc110->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN; - } else { + } else if (result != BP_RESULT_NORECORD) { DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n", __func__, result); @@ -1799,13 +1799,13 @@ void dce60_link_encoder_construct( enc110->base.id, &bp_cap_info);
/* Override features with DCE-specific values */ - if (BP_RESULT_OK == result) { + if (result == BP_RESULT_OK) { enc110->base.features.flags.bits.IS_HBR2_CAPABLE = bp_cap_info.DP_HBR2_EN; enc110->base.features.flags.bits.IS_HBR3_CAPABLE = bp_cap_info.DP_HBR3_EN; enc110->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN; - } else { + } else if (result != BP_RESULT_NORECORD) { DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n", __func__, result);
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiufei Xue jiufei.xue@samsung.com
[ Upstream commit d02d2c98d25793902f65803ab853b592c7a96b29 ]
An use-after-free issue occurred when __mark_inode_dirty() get the bdi_writeback that was in the progress of switching.
CPU: 1 PID: 562 Comm: systemd-random- Not tainted 6.6.56-gb4403bd46a8e #1 ...... pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mark_inode_dirty+0x124/0x418 lr : __mark_inode_dirty+0x118/0x418 sp : ffffffc08c9dbbc0 ........ Call trace: __mark_inode_dirty+0x124/0x418 generic_update_time+0x4c/0x60 file_modified+0xcc/0xd0 ext4_buffered_write_iter+0x58/0x124 ext4_file_write_iter+0x54/0x704 vfs_write+0x1c0/0x308 ksys_write+0x74/0x10c __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x40/0xe4 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x194/0x198
Root cause is:
systemd-random-seed kworker ---------------------------------------------------------------------- ___mark_inode_dirty inode_switch_wbs_work_fn
spin_lock(&inode->i_lock); inode_attach_wb locked_inode_to_wb_and_lock_list get inode->i_wb spin_unlock(&inode->i_lock); spin_lock(&wb->list_lock) spin_lock(&inode->i_lock) inode_io_list_move_locked spin_unlock(&wb->list_lock) spin_unlock(&inode->i_lock) spin_lock(&old_wb->list_lock) inode_do_switch_wbs spin_lock(&inode->i_lock) inode->i_wb = new_wb spin_unlock(&inode->i_lock) spin_unlock(&old_wb->list_lock) wb_put_many(old_wb, nr_switched) cgwb_release old wb released wb_wakeup_delayed() accesses wb, then trigger the use-after-free issue
Fix this race condition by holding inode spinlock until wb_wakeup_delayed() finished.
Signed-off-by: Jiufei Xue jiufei.xue@samsung.com Link: https://lore.kernel.org/20250728100715.3863241-1-jiufei.xue@samsung.com Reviewed-by: Jan Kara jack@suse.cz Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/fs-writeback.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 672d176524f5c..cb3f1790a296e 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -2545,10 +2545,6 @@ void __mark_inode_dirty(struct inode *inode, int flags) wakeup_bdi = inode_io_list_move_locked(inode, wb, dirty_list);
- spin_unlock(&wb->list_lock); - spin_unlock(&inode->i_lock); - trace_writeback_dirty_inode_enqueue(inode); - /* * If this is the first dirty inode for this bdi, * we have to wake-up the corresponding bdi thread @@ -2558,6 +2554,11 @@ void __mark_inode_dirty(struct inode *inode, int flags) if (wakeup_bdi && (wb->bdi->capabilities & BDI_CAP_WRITEBACK)) wb_wakeup_delayed(wb); + + spin_unlock(&wb->list_lock); + spin_unlock(&inode->i_lock); + trace_writeback_dirty_inode_enqueue(inode); + return; } }
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pei Xiao xiaopei01@kylinos.cn
[ Upstream commit e4a718a3a47e89805c3be9d46a84de1949a98d5d ]
tee_shm_put have NULL pointer dereference:
__optee_disable_shm_cache --> shm = reg_pair_to_ptr(...);//shm maybe return NULL tee_shm_free(shm); --> tee_shm_put(shm);//crash
Add check in tee_shm_put to fix it.
panic log: Unable to handle kernel paging request at virtual address 0000000000100cca Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000002049d07000 [0000000000100cca] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP CPU: 2 PID: 14442 Comm: systemd-sleep Tainted: P OE ------- ---- 6.6.0-39-generic #38 Source Version: 938b255f6cb8817c95b0dd5c8c2944acfce94b07 Hardware name: greatwall GW-001Y1A-FTH, BIOS Great Wall BIOS V3.0 10/26/2022 pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tee_shm_put+0x24/0x188 lr : tee_shm_free+0x14/0x28 sp : ffff001f98f9faf0 x29: ffff001f98f9faf0 x28: ffff0020df543cc0 x27: 0000000000000000 x26: ffff001f811344a0 x25: ffff8000818dac00 x24: ffff800082d8d048 x23: ffff001f850fcd18 x22: 0000000000000001 x21: ffff001f98f9fb88 x20: ffff001f83e76218 x19: ffff001f83e761e0 x18: 000000000000ffff x17: 303a30303a303030 x16: 0000000000000000 x15: 0000000000000003 x14: 0000000000000001 x13: 0000000000000000 x12: 0101010101010101 x11: 0000000000000001 x10: 0000000000000001 x9 : ffff800080e08d0c x8 : ffff001f98f9fb88 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff001f83e761e0 x1 : 00000000ffff001f x0 : 0000000000100cca Call trace: tee_shm_put+0x24/0x188 tee_shm_free+0x14/0x28 __optee_disable_shm_cache+0xa8/0x108 optee_shutdown+0x28/0x38 platform_shutdown+0x28/0x40 device_shutdown+0x144/0x2b0 kernel_power_off+0x3c/0x80 hibernate+0x35c/0x388 state_store+0x64/0x80 kobj_attr_store+0x14/0x28 sysfs_kf_write+0x48/0x60 kernfs_fop_write_iter+0x128/0x1c0 vfs_write+0x270/0x370 ksys_write+0x6c/0x100 __arm64_sys_write+0x20/0x30 invoke_syscall+0x4c/0x120 el0_svc_common.constprop.0+0x44/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x24/0x88 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x14c/0x15
Fixes: dfd0743f1d9e ("tee: handle lookup of shm with reference count 0") Signed-off-by: Pei Xiao xiaopei01@kylinos.cn Reviewed-by: Sumit Garg sumit.garg@oss.qualcomm.com Signed-off-by: Jens Wiklander jens.wiklander@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tee/tee_shm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/tee/tee_shm.c b/drivers/tee/tee_shm.c index 6fb4400333fb4..6d2db6cc247b3 100644 --- a/drivers/tee/tee_shm.c +++ b/drivers/tee/tee_shm.c @@ -438,9 +438,13 @@ EXPORT_SYMBOL_GPL(tee_shm_get_from_id); */ void tee_shm_put(struct tee_shm *shm) { - struct tee_device *teedev = shm->ctx->teedev; + struct tee_device *teedev; bool do_release = false;
+ if (!shm || !shm->ctx || !shm->ctx->teedev) + return; + + teedev = shm->ctx->teedev; mutex_lock(&teedev->mutex); if (refcount_dec_and_test(&shm->refcount)) { /*
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Robinson pbrobinson@gmail.com
[ Upstream commit d1f9c497618dece06a00e0b2995ed6b38fafe6b5 ]
As described in the pinebookpro_v2.1_mainboard_schematic.pdf page 10, he SPI Flash's VCC connector is connected to VCC_3V0 power source.
This fixes the following warning:
spi-nor spi1.0: supply vcc not found, using dummy regulator
Fixes: 5a65505a69884 ("arm64: dts: rockchip: Add initial support for Pinebook Pro") Signed-off-by: Peter Robinson pbrobinson@gmail.com Reviewed-by: Dragan Simic dsimic@manjaro.org Link: https://lore.kernel.org/r/20250730102129.224468-1-pbrobinson@gmail.com Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index 60a909a100eeb..ab2e2ee4ce6fe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -978,6 +978,7 @@ spiflash: flash@0 { reg = <0>; m25p,fast-read; spi-max-frequency = <10000000>; + vcc-supply = <&vcc_3v0>; }; };
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Antipov dmantipov@yandex.ru
[ Upstream commit 26e84445f02ce6b2fe5f3e0e28ff7add77f35e08 ]
Following bss_free() quirk introduced in commit 776b3580178f ("cfg80211: track hidden SSID networks properly"), adjust cfg80211_update_known_bss() to free the last beacon frame elements only if they're not shared via the corresponding 'hidden_beacon_bss' pointer.
Reported-by: syzbot+30754ca335e6fb7e3092@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=30754ca335e6fb7e3092 Fixes: 3ab8227d3e7d ("cfg80211: refactor cfg80211_bss_update") Signed-off-by: Dmitry Antipov dmantipov@yandex.ru Link: https://patch.msgid.link/20250813135236.799384-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/wireless/scan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/wireless/scan.c b/net/wireless/scan.c index d977d7a7675e1..e2b4149e5ff43 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -1768,7 +1768,8 @@ cfg80211_update_known_bss(struct cfg80211_registered_device *rdev, */
f = rcu_access_pointer(new->pub.beacon_ies); - kfree_rcu((struct cfg80211_bss_ies *)f, rcu_head); + if (!new->pub.hidden_beacon_bss) + kfree_rcu((struct cfg80211_bss_ies *)f, rcu_head); return false; }
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wang Liang wangliang74@huawei.com
[ Upstream commit 479a54ab92087318514c82428a87af2d7af1a576 ]
When send a broadcast packet to a tap device, which was added to a bridge, br_nf_local_in() is called to confirm the conntrack. If another conntrack with the same hash value is added to the hash table, which can be triggered by a normal packet to a non-bridge device, the below warning may happen.
------------[ cut here ]------------ WARNING: CPU: 1 PID: 96 at net/bridge/br_netfilter_hooks.c:632 br_nf_local_in+0x168/0x200 CPU: 1 UID: 0 PID: 96 Comm: tap_send Not tainted 6.17.0-rc2-dirty #44 PREEMPT(voluntary) RIP: 0010:br_nf_local_in+0x168/0x200 Call Trace: <TASK> nf_hook_slow+0x3e/0xf0 br_pass_frame_up+0x103/0x180 br_handle_frame_finish+0x2de/0x5b0 br_nf_hook_thresh+0xc0/0x120 br_nf_pre_routing_finish+0x168/0x3a0 br_nf_pre_routing+0x237/0x5e0 br_handle_frame+0x1ec/0x3c0 __netif_receive_skb_core+0x225/0x1210 __netif_receive_skb_one_core+0x37/0xa0 netif_receive_skb+0x36/0x160 tun_get_user+0xa54/0x10c0 tun_chr_write_iter+0x65/0xb0 vfs_write+0x305/0x410 ksys_write+0x60/0xd0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ---[ end trace 0000000000000000 ]---
To solve the hash conflict, nf_ct_resolve_clash() try to merge the conntracks, and update skb->_nfct. However, br_nf_local_in() still use the old ct from local variable 'nfct' after confirm(), which leads to this warning.
If confirm() does not insert the conntrack entry and return NF_DROP, the warning may also occur. There is no need to reserve the WARN_ON_ONCE, just remove it.
Link: https://lore.kernel.org/netdev/20250820043329.2902014-1-wangliang74@huawei.c... Fixes: 62e7151ae3eb ("netfilter: bridge: confirm multicast packets before passing them up the stack") Suggested-by: Florian Westphal fw@strlen.de Signed-off-by: Wang Liang wangliang74@huawei.com Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/bridge/br_netfilter_hooks.c | 3 --- 1 file changed, 3 deletions(-)
diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c index 7cd2bef583312..9ad0feb248b5d 100644 --- a/net/bridge/br_netfilter_hooks.c +++ b/net/bridge/br_netfilter_hooks.c @@ -630,9 +630,6 @@ static unsigned int br_nf_local_in(void *priv, break; }
- ct = container_of(nfct, struct nf_conn, ct_general); - WARN_ON_ONCE(!nf_ct_is_confirmed(ct)); - return ret; } #endif
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Phil Sutter phil@nwl.cc
[ Upstream commit 54416fd76770bd04fc3c501810e8d673550bab26 ]
The helper registration return value is passed-through by module_init callbacks which modprobe confuses with the harmless -EEXIST returned when trying to load an already loaded module.
Make sure modprobe fails so users notice their helper has not been registered and won't work.
Suggested-by: Christophe Leroy christophe.leroy@csgroup.eu Fixes: 12f7a505331e ("netfilter: add user-space connection tracking helper infrastructure") Signed-off-by: Phil Sutter phil@nwl.cc Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conntrack_helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index 41c9708b50575..de5ac9f431031 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -418,7 +418,7 @@ int nf_conntrack_helper_register(struct nf_conntrack_helper *me) (cur->tuple.src.l3num == NFPROTO_UNSPEC || cur->tuple.src.l3num == me->tuple.src.l3num) && cur->tuple.dst.protonum == me->tuple.dst.protonum) { - ret = -EEXIST; + ret = -EBUSY; goto out; } } @@ -429,7 +429,7 @@ int nf_conntrack_helper_register(struct nf_conntrack_helper *me) hlist_for_each_entry(cur, &nf_ct_helper_hash[h], hnode) { if (nf_ct_tuple_src_mask_cmp(&cur->tuple, &me->tuple, &mask)) { - ret = -EEXIST; + ret = -EBUSY; goto out; } }
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kuniyuki Iwashima kuniyu@google.com
[ Upstream commit 862c628108562d8c7a516a900034823b381d3cba ]
syzbot reported the splat below without a repro.
In the splat, a single thread calling bt_accept_dequeue() freed sk and touched it after that.
The root cause would be the racy l2cap_sock_cleanup_listen() call added by the cited commit.
bt_accept_dequeue() is called under lock_sock() except for l2cap_sock_release().
Two threads could see the same socket during the list iteration in bt_accept_dequeue():
CPU1 CPU2 (close()) ---- ---- sock_hold(sk) sock_hold(sk); lock_sock(sk) <-- block close() sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- refcnt by bt_accept_enqueue() release_sock(sk) lock_sock(sk) sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- last refcnt bt_accept_unlink(sk) <-- UAF
Depending on the timing, the other thread could show up in the "Freed by task" part.
Let's call l2cap_sock_cleanup_listen() under lock_sock() in l2cap_sock_release().
[0]: BUG: KASAN: slab-use-after-free in debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] BUG: KASAN: slab-use-after-free in do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 Read of size 4 at addr ffff88803b7eb1c4 by task syz.5.3276/16995 CPU: 3 UID: 0 PID: 16995 Comm: syz.5.3276 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:356 [inline] release_sock+0x21/0x220 net/core/sock.c:3746 bt_accept_dequeue+0x505/0x600 net/bluetooth/af_bluetooth.c:312 l2cap_sock_cleanup_listen+0x5c/0x2a0 net/bluetooth/l2cap_sock.c:1451 l2cap_sock_release+0x5c/0x210 net/bluetooth/l2cap_sock.c:1425 __sock_release+0xb3/0x270 net/socket.c:649 sock_close+0x1c/0x30 net/socket.c:1439 __fput+0x3ff/0xb70 fs/file_table.c:468 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x3f6/0x4c0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2accf8ebe9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdb6cb1378 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 00000000000426fb RCX: 00007f2accf8ebe9 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007f2acd1b7da0 R08: 0000000000000001 R09: 00000012b6cb166f R10: 0000001b30e20000 R11: 0000000000000246 R12: 00007f2acd1b609c R13: 00007f2acd1b6090 R14: ffffffffffffffff R15: 00007ffdb6cb1490 </TASK>
Allocated by task 5326: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4365 [inline] __kmalloc_noprof+0x223/0x510 mm/slub.c:4377 kmalloc_noprof include/linux/slab.h:909 [inline] sk_prot_alloc+0x1a8/0x2a0 net/core/sock.c:2239 sk_alloc+0x36/0xc20 net/core/sock.c:2295 bt_sock_alloc+0x3b/0x3a0 net/bluetooth/af_bluetooth.c:151 l2cap_sock_alloc.constprop.0+0x33/0x1d0 net/bluetooth/l2cap_sock.c:1894 l2cap_sock_new_connection_cb+0x101/0x240 net/bluetooth/l2cap_sock.c:1482 l2cap_connect_cfm+0x4c4/0xf80 net/bluetooth/l2cap_core.c:7287 hci_connect_cfm include/net/bluetooth/hci_core.h:2050 [inline] hci_remote_features_evt+0x4dd/0x970 net/bluetooth/hci_event.c:3712 hci_event_func net/bluetooth/hci_event.c:7519 [inline] hci_event_packet+0xa0d/0x11c0 net/bluetooth/hci_event.c:7573 hci_rx_work+0x2c5/0x16b0 net/bluetooth/hci_core.c:4071 process_one_work+0x9cf/0x1b70 kernel/workqueue.c:3236 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:463 ret_from_fork+0x5d7/0x6f0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
Freed by task 16995: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:243 [inline] __kasan_slab_free+0x60/0x70 mm/kasan/common.c:275 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2417 [inline] slab_free mm/slub.c:4680 [inline] kfree+0x2b4/0x4d0 mm/slub.c:4879 sk_prot_free net/core/sock.c:2278 [inline] __sk_destruct+0x75f/0x9a0 net/core/sock.c:2373 sk_destruct+0xc2/0xf0 net/core/sock.c:2401 __sk_free+0xf4/0x3e0 net/core/sock.c:2412 sk_free+0x6a/0x90 net/core/sock.c:2423 sock_put include/net/sock.h:1960 [inline] bt_accept_unlink+0x245/0x2e0 net/bluetooth/af_bluetooth.c:262 bt_accept_dequeue+0x517/0x600 net/bluetooth/af_bluetooth.c:308 l2cap_sock_cleanup_listen+0x5c/0x2a0 net/bluetooth/l2cap_sock.c:1451 l2cap_sock_release+0x5c/0x210 net/bluetooth/l2cap_sock.c:1425 __sock_release+0xb3/0x270 net/socket.c:649 sock_close+0x1c/0x30 net/socket.c:1439 __fput+0x3ff/0xb70 fs/file_table.c:468 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x3f6/0x4c0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 1728137b33c0 ("Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_ready_cb") Reported-by: syzbot+e5e64cdf8e92046dd3e1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-bluetooth/68af6b9d.a70a0220.3cafd4.0032.GAE@go... Signed-off-by: Kuniyuki Iwashima kuniyu@google.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/l2cap_sock.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index b2719f1b8adff..8e2e6d1a6dd15 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -1416,7 +1416,10 @@ static int l2cap_sock_release(struct socket *sock) if (!sk) return 0;
+ lock_sock_nested(sk, L2CAP_NESTING_PARENT); l2cap_sock_cleanup_listen(sk); + release_sock(sk); + bt_sock_unlink(&l2cap_sk_list, sk);
err = l2cap_sock_shutdown(sock, SHUT_RDWR);
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alok Tiwari alok.a.tiwari@oracle.com
[ Upstream commit b79e498080b170fd94fc83bca2471f450811549b ]
The current code incorrectly passes (XIRCREG1_ECR | FullDuplex) as the register address to GetByte(), instead of fetching the register value and OR-ing it with FullDuplex. This results in an invalid register access.
Fix it by reading XIRCREG1_ECR first, then or-ing with FullDuplex before writing it back.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Alok Tiwari alok.a.tiwari@oracle.com Reviewed-by: Simon Horman horms@kernel.org Reviewed-by: Jacob Keller jacob.e.keller@intel.com Link: https://patch.msgid.link/20250827192645.658496-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/xircom/xirc2ps_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/xircom/xirc2ps_cs.c b/drivers/net/ethernet/xircom/xirc2ps_cs.c index 10f42b7df8b35..efbd337b8bb8e 100644 --- a/drivers/net/ethernet/xircom/xirc2ps_cs.c +++ b/drivers/net/ethernet/xircom/xirc2ps_cs.c @@ -1582,7 +1582,7 @@ do_reset(struct net_device *dev, int full) msleep(40); /* wait 40 msec to let it complete */ } if (full_duplex) - PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex)); + PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR) | FullDuplex); } else { /* No MII */ SelectPage(0); value = GetByte(XIRCREG_ESR); /* read the ESR */
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miaoqian Lin linmq006@gmail.com
[ Upstream commit 0704a3da7ce50f972e898bbda88d2692a22922d9 ]
dsp_hwec_enable() allocates dup pointer by kstrdup(arg), but then it updates dup variable by strsep(&dup, ","). As a result when it calls kfree(dup), the dup variable may be a modified pointer that no longer points to the original allocated memory, causing a memory leak.
The issue is the same pattern as fixed in commit c6a502c22999 ("mISDN: Fix memory leak in dsp_pipeline_build()").
Fixes: 9a4381618262 ("mISDN: Remove VLAs") Signed-off-by: Miaoqian Lin linmq006@gmail.com Reviewed-by: Simon Horman horms@kernel.org Link: https://patch.msgid.link/20250828081457.36061-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/isdn/mISDN/dsp_hwec.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/isdn/mISDN/dsp_hwec.c b/drivers/isdn/mISDN/dsp_hwec.c index 0b3f29195330a..0cd216e28f009 100644 --- a/drivers/isdn/mISDN/dsp_hwec.c +++ b/drivers/isdn/mISDN/dsp_hwec.c @@ -51,14 +51,14 @@ void dsp_hwec_enable(struct dsp *dsp, const char *arg) goto _do;
{ - char *dup, *tok, *name, *val; + char *dup, *next, *tok, *name, *val; int tmp;
- dup = kstrdup(arg, GFP_ATOMIC); + dup = next = kstrdup(arg, GFP_ATOMIC); if (!dup) return;
- while ((tok = strsep(&dup, ","))) { + while ((tok = strsep(&next, ","))) { if (!strlen(tok)) continue; name = strsep(&tok, "=");
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fabian Bläse fabian@blaese.de
[ Upstream commit c6dd1aa2cbb72b33e0569f3e71d95792beab5042 ]
The icmp_ndo_send function was originally introduced to ensure proper rate limiting when icmp_send is called by a network device driver, where the packet's source address may have already been transformed by SNAT.
However, the original implementation only considers the IP_CT_DIR_ORIGINAL direction for SNAT and always replaced the packet's source address with that of the original-direction tuple. This causes two problems:
1. For SNAT: Reply-direction packets were incorrectly translated using the source address of the CT original direction, even though no translation is required.
2. For DNAT: Reply-direction packets were not handled at all. In DNAT, the original direction's destination is translated. Therefore, in the reply direction the source address must be set to the reply-direction source, so rate limiting works as intended.
Fix this by using the connection direction to select the correct tuple for source address translation, and adjust the pre-checks to handle reply-direction packets in case of DNAT.
Additionally, wrap the `ct->status` access in READ_ONCE(). This avoids possible KCSAN reports about concurrent updates to `ct->status`.
Fixes: 0b41713b6066 ("icmp: introduce helper for nat'd source address in network device context") Signed-off-by: Fabian Bläse fabian@blaese.de Cc: Jason A. Donenfeld Jason@zx2c4.com Reviewed-by: Florian Westphal fw@strlen.de Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/icmp.c | 6 ++++-- net/ipv6/ip6_icmp.c | 6 ++++-- 2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index 38b30f6790294..8a70e51654264 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -792,11 +792,12 @@ void icmp_ndo_send(struct sk_buff *skb_in, int type, int code, __be32 info) struct sk_buff *cloned_skb = NULL; struct ip_options opts = { 0 }; enum ip_conntrack_info ctinfo; + enum ip_conntrack_dir dir; struct nf_conn *ct; __be32 orig_ip;
ct = nf_ct_get(skb_in, &ctinfo); - if (!ct || !(ct->status & IPS_SRC_NAT)) { + if (!ct || !(READ_ONCE(ct->status) & IPS_NAT_MASK)) { __icmp_send(skb_in, type, code, info, &opts); return; } @@ -811,7 +812,8 @@ void icmp_ndo_send(struct sk_buff *skb_in, int type, int code, __be32 info) goto out;
orig_ip = ip_hdr(skb_in)->saddr; - ip_hdr(skb_in)->saddr = ct->tuplehash[0].tuple.src.u3.ip; + dir = CTINFO2DIR(ctinfo); + ip_hdr(skb_in)->saddr = ct->tuplehash[dir].tuple.src.u3.ip; __icmp_send(skb_in, type, code, info, &opts); ip_hdr(skb_in)->saddr = orig_ip; out: diff --git a/net/ipv6/ip6_icmp.c b/net/ipv6/ip6_icmp.c index 9e3574880cb03..233914b63bdb8 100644 --- a/net/ipv6/ip6_icmp.c +++ b/net/ipv6/ip6_icmp.c @@ -54,11 +54,12 @@ void icmpv6_ndo_send(struct sk_buff *skb_in, u8 type, u8 code, __u32 info) struct inet6_skb_parm parm = { 0 }; struct sk_buff *cloned_skb = NULL; enum ip_conntrack_info ctinfo; + enum ip_conntrack_dir dir; struct in6_addr orig_ip; struct nf_conn *ct;
ct = nf_ct_get(skb_in, &ctinfo); - if (!ct || !(ct->status & IPS_SRC_NAT)) { + if (!ct || !(READ_ONCE(ct->status) & IPS_NAT_MASK)) { __icmpv6_send(skb_in, type, code, info, &parm); return; } @@ -73,7 +74,8 @@ void icmpv6_ndo_send(struct sk_buff *skb_in, u8 type, u8 code, __u32 info) goto out;
orig_ip = ipv6_hdr(skb_in)->saddr; - ipv6_hdr(skb_in)->saddr = ct->tuplehash[0].tuple.src.u3.in6; + dir = CTINFO2DIR(ctinfo); + ipv6_hdr(skb_in)->saddr = ct->tuplehash[dir].tuple.src.u3.in6; __icmpv6_send(skb_in, type, code, info, &parm); ipv6_hdr(skb_in)->saddr = orig_ip; out:
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhen Ni zhen.ni@easystack.cn
[ Upstream commit a556f06338e1d5a85af0e32ecb46e365547f92b9 ]
list_first_entry() never returns NULL - if the list is empty, it still returns a pointer to an invalid object, leading to potential invalid memory access when dereferenced.
Fix this by using list_first_entry_or_null instead of list_first_entry.
Fixes: e3219ce6a775 ("i40e: Add support for client interface for IWARP driver") Signed-off-by: Zhen Ni zhen.ni@easystack.cn Reviewed-by: Paul Menzel pmenzel@molgen.mpg.de Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/i40e/i40e_client.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_client.c b/drivers/net/ethernet/intel/i40e/i40e_client.c index 8bcb98b85e3d9..4af2a4c591067 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_client.c +++ b/drivers/net/ethernet/intel/i40e/i40e_client.c @@ -362,8 +362,8 @@ static void i40e_client_add_instance(struct i40e_pf *pf) if (i40e_client_get_params(vsi, &cdev->lan_info.params)) goto free_cdev;
- mac = list_first_entry(&cdev->lan_info.netdev->dev_addrs.list, - struct netdev_hw_addr, list); + mac = list_first_entry_or_null(&cdev->lan_info.netdev->dev_addrs.list, + struct netdev_hw_addr, list); if (mac) ether_addr_copy(cdev->lan_info.lanmac, mac->addr); else
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau nbd@nbd.name
[ Upstream commit d4736737110ffa83d29f1c5d17b26113864205f6 ]
When sending llc packets with vlan tx offload, the hardware fails to actually add the tag. Deal with this by fixing it up in software.
Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Reported-by: Thibaut VARENE hacks@slashdirt.org Signed-off-by: Felix Fietkau nbd@nbd.name Reviewed-by: Simon Horman horms@kernel.org Link: https://patch.msgid.link/20250831182007.51619-1-nbd@nbd.name Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 711acc6059a4f..4d7a72bcee614 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1196,6 +1196,13 @@ static netdev_tx_t mtk_start_xmit(struct sk_buff *skb, struct net_device *dev) bool gso = false; int tx_num;
+ if (skb_vlan_tag_present(skb) && + !eth_proto_is_802_3(eth_hdr(skb)->h_proto)) { + skb = __vlan_hwaccel_push_inside(skb); + if (!skb) + goto dropped; + } + /* normally we can rely on the stack not calling this more than once, * however we have 2 queues running on the same ring so we need to lock * the ring access @@ -1241,8 +1248,9 @@ static netdev_tx_t mtk_start_xmit(struct sk_buff *skb, struct net_device *dev)
drop: spin_unlock(ð->page_lock); - stats->tx_dropped++; dev_kfree_skb_any(skb); +dropped: + stats->tx_dropped++; return NETDEV_TX_OK; }
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter dan.carpenter@linaro.org
[ Upstream commit f8f15f6742b8874e59c9c715d0af3474608310ad ]
If the ssidie[1] length is more that 32 it leads to memory corruption.
Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Signed-off-by: Dan Carpenter dan.carpenter@linaro.org Link: https://patch.msgid.link/e91fb43fcedc4893b604dfb973131661510901a7.1756456951... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/st/cw1200/sta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/st/cw1200/sta.c b/drivers/net/wireless/st/cw1200/sta.c index 236022d4ae2a3..0f2d1ec34cd82 100644 --- a/drivers/net/wireless/st/cw1200/sta.c +++ b/drivers/net/wireless/st/cw1200/sta.c @@ -1289,7 +1289,7 @@ static void cw1200_do_join(struct cw1200_common *priv) rcu_read_lock(); ssidie = ieee80211_bss_get_ie(bss, WLAN_EID_SSID); if (ssidie) { - join.ssid_len = ssidie[1]; + join.ssid_len = min(ssidie[1], IEEE80211_MAX_SSID_LEN); memcpy(join.ssid, &ssidie[2], join.ssid_len); } rcu_read_unlock();
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter dan.carpenter@linaro.org
[ Upstream commit c786794bd27b0d7a5fd9063695df83206009be59 ]
If the ssid_eid[1] length is more that 32 it leads to memory corruption.
Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Signed-off-by: Dan Carpenter dan.carpenter@linaro.org Link: https://patch.msgid.link/2a40f5ec7617144aef412034c12919a4927d90ad.1756456951... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/marvell/libertas/cfg.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/marvell/libertas/cfg.c b/drivers/net/wireless/marvell/libertas/cfg.c index 4e3de684928bf..a659054c1bcd9 100644 --- a/drivers/net/wireless/marvell/libertas/cfg.c +++ b/drivers/net/wireless/marvell/libertas/cfg.c @@ -1102,10 +1102,13 @@ static int lbs_associate(struct lbs_private *priv, /* add SSID TLV */ rcu_read_lock(); ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID); - if (ssid_eid) - pos += lbs_add_ssid_tlv(pos, ssid_eid + 2, ssid_eid[1]); - else + if (ssid_eid) { + u32 ssid_len = min(ssid_eid[1], IEEE80211_MAX_SSID_LEN); + + pos += lbs_add_ssid_tlv(pos, ssid_eid + 2, ssid_len); + } else { lbs_deb_assoc("no SSID\n"); + } rcu_read_unlock();
/* add DS param TLV */
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rosen Penev rosenp@gmail.com
[ Upstream commit 9d28f94912589f04ab51fbccaef287d4f40e0d1f ]
phy_np needs to get freed, just like the other child nodes.
Fixes: 5fc7cf179449 ("net: thunderx: Cleanup PHY probing code.") Signed-off-by: Rosen Penev rosenp@gmail.com Reviewed-by: Simon Horman horms@kernel.org Link: https://patch.msgid.link/20250901213018.47392-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/cavium/thunder/thunder_bgx.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c index 1831066c76475..d749431803e2e 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c @@ -1491,13 +1491,17 @@ static int bgx_init_of_phy(struct bgx *bgx) * this cortina phy, for which there is no driver * support, ignore it. */ - if (phy_np && - !of_device_is_compatible(phy_np, "cortina,cs4223-slice")) { - /* Wait until the phy drivers are available */ - pd = of_phy_find_device(phy_np); - if (!pd) - goto defer; - bgx->lmac[lmac].phydev = pd; + if (phy_np) { + if (!of_device_is_compatible(phy_np, "cortina,cs4223-slice")) { + /* Wait until the phy drivers are available */ + pd = of_phy_find_device(phy_np); + if (!pd) { + of_node_put(phy_np); + goto defer; + } + bgx->lmac[lmac].phydev = pd; + } + of_node_put(phy_np); }
lmac++;
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rosen Penev rosenp@gmail.com
[ Upstream commit 9e3d71a92e561ccc77025689dab25d201fee7a3e ]
All paths in probe that call goto defer do so before assigning phydev and thus it makes sense to cleanup the prior index. It also fixes a bug where index 0 does not get cleaned up.
Fixes: b7d3e3d3d21a ("net: thunderx: Don't leak phy device references on -EPROBE_DEFER condition.") Signed-off-by: Rosen Penev rosenp@gmail.com Reviewed-by: Vadim Fedorenko vadim.fedorenko@linux.dev Reviewed-by: Simon Horman horms@kernel.org Link: https://patch.msgid.link/20250901213314.48599-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c index d749431803e2e..460f8c0989947 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c @@ -1517,11 +1517,11 @@ static int bgx_init_of_phy(struct bgx *bgx) * for phy devices we may have already found. */ while (lmac) { + lmac--; if (bgx->lmac[lmac].phydev) { put_device(&bgx->lmac[lmac].phydev->mdio.dev); bgx->lmac[lmac].phydev = NULL; } - lmac--; } of_node_put(node); return -EPROBE_DEFER;
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter dan.carpenter@linaro.org
[ Upstream commit a51160f8da850a65afbf165f5bbac7ffb388bf74 ]
The inetdev_init() function never returns NULL. Check for error pointers instead.
Fixes: 22600596b675 ("ipv4: give an IPv4 dev to blackhole_netdev") Signed-off-by: Dan Carpenter dan.carpenter@linaro.org Reviewed-by: Simon Horman horms@kernel.org Reviewed-by: Eric Dumazet edumazet@google.com Link: https://patch.msgid.link/aLaQWL9NguWmeM1i@stanley.mountain Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/devinet.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 33e87b442b475..6b0dc07f273a2 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -332,14 +332,13 @@ static void inetdev_destroy(struct in_device *in_dev)
static int __init inet_blackhole_dev_init(void) { - int err = 0; + struct in_device *in_dev;
rtnl_lock(); - if (!inetdev_init(blackhole_netdev)) - err = -ENOMEM; + in_dev = inetdev_init(blackhole_netdev); rtnl_unlock();
- return err; + return PTR_ERR_OR_ZERO(in_dev); } late_initcall(inet_blackhole_dev_init);
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet edumazet@google.com
[ Upstream commit 8156210d36a43e76372312c87eb5ea3dbb405a85 ]
Bernard Pidoux reported a regression apparently caused by commit c353e8983e0d ("net: introduce per netns packet chains").
skb->dev becomes NULL and we crash in __netif_receive_skb_core().
Before above commit, different kind of bugs or corruptions could happen without a major crash.
But the root cause is that ax25_kiss_rcv() can queue/mangle input skb without checking if this skb is shared or not.
Many thanks to Bernard Pidoux for his help, diagnosis and tests.
We had a similar issue years ago fixed with commit 7aaed57c5c28 ("phonet: properly unshare skbs in phonet_rcv()").
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Bernard Pidoux f6bvp@free.fr Closes: https://lore.kernel.org/netdev/1713f383-c538-4918-bc64-13b3288cd542@free.fr/ Tested-by: Bernard Pidoux f6bvp@free.fr Signed-off-by: Eric Dumazet edumazet@google.com Cc: Joerg Reuter jreuter@yaina.de Cc: David Ranch dranch@trinnet.net Cc: Folkert van Heusden folkert@vanheusden.com Reviewed-by: Dan Cross crossd@gmail.com Link: https://patch.msgid.link/20250902124642.212705-1-edumazet@google.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ax25/ax25_in.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/net/ax25/ax25_in.c b/net/ax25/ax25_in.c index cd6afe895db99..e43f92372cba5 100644 --- a/net/ax25/ax25_in.c +++ b/net/ax25/ax25_in.c @@ -433,6 +433,10 @@ static int ax25_rcv(struct sk_buff *skb, struct net_device *dev, int ax25_kiss_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype, struct net_device *orig_dev) { + skb = skb_share_check(skb, GFP_ATOMIC); + if (!skb) + return NET_RX_DROP; + skb_orphan(skb);
if (!net_eq(dev_net(dev), &init_net)) {
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wang Liang wangliang74@huawei.com
[ Upstream commit 0a228624bcc00af41f281a2a84c928595a74c17d ]
When device_register() return error in atm_register_sysfs(), which can be triggered by kzalloc fail in device_private_init() or other reasons, kmemleak reports the following memory leaks:
unreferenced object 0xffff88810182fb80 (size 8): comm "insmod", pid 504, jiffies 4294852464 hex dump (first 8 bytes): 61 64 75 6d 6d 79 30 00 adummy0. backtrace (crc 14dfadaf): __kmalloc_node_track_caller_noprof+0x335/0x450 kvasprintf+0xb3/0x130 kobject_set_name_vargs+0x45/0x120 dev_set_name+0xa9/0xe0 atm_register_sysfs+0xf3/0x220 atm_dev_register+0x40b/0x780 0xffffffffa000b089 do_one_initcall+0x89/0x300 do_init_module+0x27b/0x7d0 load_module+0x54cd/0x5ff0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x32c/0x610 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xa8/0x270 entry_SYSCALL_64_after_hwframe+0x77/0x7f
When device_create_file() return error in atm_register_sysfs(), the same issue also can be triggered.
Function put_device() should be called to release kobj->name memory and other device resource, instead of kfree().
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array") Signed-off-by: Wang Liang wangliang74@huawei.com Reviewed-by: Simon Horman horms@kernel.org Link: https://patch.msgid.link/20250901063537.1472221-1-wangliang74@huawei.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/atm/resources.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/atm/resources.c b/net/atm/resources.c index b19d851e1f443..7c6fdedbcf4e5 100644 --- a/net/atm/resources.c +++ b/net/atm/resources.c @@ -112,7 +112,9 @@ struct atm_dev *atm_dev_register(const char *type, struct device *parent,
if (atm_proc_dev_register(dev) < 0) { pr_err("atm_proc_dev_register failed for dev %s\n", type); - goto out_fail; + mutex_unlock(&atm_dev_mutex); + kfree(dev); + return NULL; }
if (atm_register_sysfs(dev, parent) < 0) { @@ -128,7 +130,7 @@ struct atm_dev *atm_dev_register(const char *type, struct device *parent, return dev;
out_fail: - kfree(dev); + put_device(&dev->class_dev); dev = NULL; goto out; }
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qingfang Deng dqfext@gmail.com
[ Upstream commit 4844123fe0b853a4982c02666cb3fd863d701d50 ]
If alloc_skb() fails in pad_compress_skb(), it returns NULL without releasing the old skb. The caller does:
skb = pad_compress_skb(ppp, skb); if (!skb) goto drop;
drop: kfree_skb(skb);
When pad_compress_skb() returns NULL, the reference to the old skb is lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak.
Align pad_compress_skb() semantics with realloc(): only free the old skb if allocation and compression succeed. At the call site, use the new_skb variable so the original skb is not lost when pad_compress_skb() fails.
Fixes: b3f9b92a6ec1 ("[PPP]: add PPP MPPE encryption module") Signed-off-by: Qingfang Deng dqfext@gmail.com Reviewed-by: Eric Dumazet edumazet@google.com Reviewed-by: Yue Haibing yuehaibing@huawei.com Link: https://patch.msgid.link/20250903100726.269839-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ppp/ppp_generic.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index 5cb06e04293e3..91a19ed03bc7d 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -1752,7 +1752,6 @@ pad_compress_skb(struct ppp *ppp, struct sk_buff *skb) */ if (net_ratelimit()) netdev_err(ppp->dev, "ppp: compressor dropped pkt\n"); - kfree_skb(skb); consume_skb(new_skb); new_skb = NULL; } @@ -1854,9 +1853,10 @@ ppp_send_frame(struct ppp *ppp, struct sk_buff *skb) "down - pkt dropped.\n"); goto drop; } - skb = pad_compress_skb(ppp, skb); - if (!skb) + new_skb = pad_compress_skb(ppp, skb); + if (!new_skb) goto drop; + skb = new_skb; }
/*
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kurt Kanzenbach kurt@linutronix.de
[ Upstream commit f72de02ebece2e962462bc0c1e9efd29eaa029b2 ]
PHY drivers such as micrel or dp83640 need to analyze whether a given skb is a PTP sync message for one step functionality.
In order to avoid code duplication introduce a generic function and move it to ptp classify.
Signed-off-by: Kurt Kanzenbach kurt@linutronix.de Signed-off-by: David S. Miller davem@davemloft.net Stable-dep-of: 9b2bfdbf43ad ("phy: mscc: Stop taking ts_lock for tx_queue and use its own lock") Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/ptp_classify.h | 15 +++++++++++++++ net/core/ptp_classifier.c | 12 ++++++++++++ 2 files changed, 27 insertions(+)
diff --git a/include/linux/ptp_classify.h b/include/linux/ptp_classify.h index 7a526b52bd748..c91ede9654f92 100644 --- a/include/linux/ptp_classify.h +++ b/include/linux/ptp_classify.h @@ -128,6 +128,17 @@ static inline u8 ptp_get_msgtype(const struct ptp_header *hdr, return msgtype; }
+/** + * ptp_msg_is_sync - Evaluates whether the given skb is a PTP Sync message + * @skb: packet buffer + * @type: type of the packet (see ptp_classify_raw()) + * + * This function evaluates whether the given skb is a PTP Sync message. + * + * Return: true if sync message, false otherwise + */ +bool ptp_msg_is_sync(struct sk_buff *skb, unsigned int type); + void __init ptp_classifier_init(void); #else static inline void ptp_classifier_init(void) @@ -150,5 +161,9 @@ static inline u8 ptp_get_msgtype(const struct ptp_header *hdr, */ return PTP_MSGTYPE_SYNC; } +static inline bool ptp_msg_is_sync(struct sk_buff *skb, unsigned int type) +{ + return false; +} #endif #endif /* _PTP_CLASSIFY_H_ */ diff --git a/net/core/ptp_classifier.c b/net/core/ptp_classifier.c index dd4cf01d1e0a2..598041b0499e3 100644 --- a/net/core/ptp_classifier.c +++ b/net/core/ptp_classifier.c @@ -137,6 +137,18 @@ struct ptp_header *ptp_parse_header(struct sk_buff *skb, unsigned int type) } EXPORT_SYMBOL_GPL(ptp_parse_header);
+bool ptp_msg_is_sync(struct sk_buff *skb, unsigned int type) +{ + struct ptp_header *hdr; + + hdr = ptp_parse_header(skb, type); + if (!hdr) + return false; + + return ptp_get_msgtype(hdr, type) == PTP_MSGTYPE_SYNC; +} +EXPORT_SYMBOL_GPL(ptp_msg_is_sync); + void __init ptp_classifier_init(void) { static struct sock_filter ptp_filter[] __initdata = {
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Horatiu Vultur horatiu.vultur@microchip.com
[ Upstream commit 846992645b25ec4253167e3f931e4597eb84af56 ]
Fix memory leak when running one-step timestamping. When running one-step sync timestamping, the HW is configured to insert the TX time into the frame, so there is no reason to keep the skb anymore. As in this case the HW will never generate an interrupt to say that the frame was timestamped, then the frame will never released. Fix this by freeing the frame in case of one-step timestamping.
Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur horatiu.vultur@microchip.com Link: https://patch.msgid.link/20250522115722.2827199-1-horatiu.vultur@microchip.c... Signed-off-by: Jakub Kicinski kuba@kernel.org Stable-dep-of: 9b2bfdbf43ad ("phy: mscc: Stop taking ts_lock for tx_queue and use its own lock") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/mscc/mscc_ptp.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/mscc/mscc_ptp.c b/drivers/net/phy/mscc/mscc_ptp.c index e30e6ba9da2f4..717435562f1c5 100644 --- a/drivers/net/phy/mscc/mscc_ptp.c +++ b/drivers/net/phy/mscc/mscc_ptp.c @@ -1171,18 +1171,24 @@ static void vsc85xx_txtstamp(struct mii_timestamper *mii_ts, container_of(mii_ts, struct vsc8531_private, mii_ts);
if (!vsc8531->ptp->configured) - return; + goto out;
- if (vsc8531->ptp->tx_type == HWTSTAMP_TX_OFF) { - kfree_skb(skb); - return; - } + if (vsc8531->ptp->tx_type == HWTSTAMP_TX_OFF) + goto out; + + if (vsc8531->ptp->tx_type == HWTSTAMP_TX_ONESTEP_SYNC) + if (ptp_msg_is_sync(skb, type)) + goto out;
skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
mutex_lock(&vsc8531->ts_lock); __skb_queue_tail(&vsc8531->ptp->tx_queue, skb); mutex_unlock(&vsc8531->ts_lock); + return; + +out: + kfree_skb(skb); }
static bool vsc85xx_rxtstamp(struct mii_timestamper *mii_ts,
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Horatiu Vultur horatiu.vultur@microchip.com
[ Upstream commit 9b2bfdbf43adb9929c5ddcdd96efedbf1c88cf53 ]
When transmitting a PTP frame which is timestamp using 2 step, the following warning appears if CONFIG_PROVE_LOCKING is enabled: ============================= [ BUG: Invalid wait context ] 6.17.0-rc1-00326-ge6160462704e #427 Not tainted ----------------------------- ptp4l/119 is trying to lock: c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac other info that might help us debug this: context-{4:4} 4 locks held by ptp4l/119: #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350 stack backtrace: CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e #427 NONE Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __lock_acquire+0x8e8/0x29dc __lock_acquire from lock_acquire+0x108/0x38c lock_acquire from __mutex_lock+0xb0/0xe78 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568 packet_sendmsg from __sys_sendto+0x110/0x19c __sys_sendto from sys_send+0x18/0x20 sys_send from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b05fa8 to 0xf0b05ff0) 5fa0: 00000001 0000000e 0000000e 0004b47a 0000003a 00000000 5fc0: 00000001 0000000e 00000000 00000121 0004af58 00044874 00000000 00000000 5fe0: 00000001 bee9d420 00025a10 b6e75c7c
So, instead of using the ts_lock for tx_queue, use the spinlock that skb_buff_head has.
Reviewed-by: Vadim Fedorenko vadim.fedorenko@linux.dev Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur horatiu.vultur@microchip.com Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.c... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/mscc/mscc_ptp.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/net/phy/mscc/mscc_ptp.c b/drivers/net/phy/mscc/mscc_ptp.c index 717435562f1c5..7b73b78ac9b35 100644 --- a/drivers/net/phy/mscc/mscc_ptp.c +++ b/drivers/net/phy/mscc/mscc_ptp.c @@ -455,12 +455,12 @@ static void vsc85xx_dequeue_skb(struct vsc85xx_ptp *ptp) *p++ = (reg >> 24) & 0xff; }
- len = skb_queue_len(&ptp->tx_queue); + len = skb_queue_len_lockless(&ptp->tx_queue); if (len < 1) return;
while (len--) { - skb = __skb_dequeue(&ptp->tx_queue); + skb = skb_dequeue(&ptp->tx_queue); if (!skb) return;
@@ -485,7 +485,7 @@ static void vsc85xx_dequeue_skb(struct vsc85xx_ptp *ptp) * packet in the FIFO right now, reschedule it for later * packets. */ - __skb_queue_tail(&ptp->tx_queue, skb); + skb_queue_tail(&ptp->tx_queue, skb); } }
@@ -1070,6 +1070,7 @@ static int vsc85xx_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr) case HWTSTAMP_TX_ON: break; case HWTSTAMP_TX_OFF: + skb_queue_purge(&vsc8531->ptp->tx_queue); break; default: return -ERANGE; @@ -1094,9 +1095,6 @@ static int vsc85xx_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr)
mutex_lock(&vsc8531->ts_lock);
- __skb_queue_purge(&vsc8531->ptp->tx_queue); - __skb_queue_head_init(&vsc8531->ptp->tx_queue); - /* Disable predictor while configuring the 1588 block */ val = vsc85xx_ts_read_csr(phydev, PROCESSOR, MSCC_PHY_PTP_INGR_PREDICTOR); @@ -1182,9 +1180,7 @@ static void vsc85xx_txtstamp(struct mii_timestamper *mii_ts,
skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
- mutex_lock(&vsc8531->ts_lock); - __skb_queue_tail(&vsc8531->ptp->tx_queue, skb); - mutex_unlock(&vsc8531->ts_lock); + skb_queue_tail(&vsc8531->ptp->tx_queue, skb); return;
out: @@ -1550,6 +1546,7 @@ void vsc8584_ptp_deinit(struct phy_device *phydev) if (vsc8531->ptp->ptp_clock) { ptp_clock_unregister(vsc8531->ptp->ptp_clock); skb_queue_purge(&vsc8531->rx_skbs_list); + skb_queue_purge(&vsc8531->ptp->tx_queue); } }
@@ -1573,7 +1570,7 @@ irqreturn_t vsc8584_handle_ts_interrupt(struct phy_device *phydev) if (rc & VSC85XX_1588_INT_FIFO_ADD) { vsc85xx_get_tx_ts(priv->ptp); } else if (rc & VSC85XX_1588_INT_FIFO_OVERFLOW) { - __skb_queue_purge(&priv->ptp->tx_queue); + skb_queue_purge(&priv->ptp->tx_queue); vsc85xx_ts_reset_fifo(phydev); }
@@ -1593,6 +1590,7 @@ int vsc8584_ptp_probe(struct phy_device *phydev) mutex_init(&vsc8531->phc_lock); mutex_init(&vsc8531->ts_lock); skb_queue_head_init(&vsc8531->rx_skbs_list); + skb_queue_head_init(&vsc8531->ptp->tx_queue);
/* Retrieve the shared load/save GPIO. Request it as non exclusive as * the same GPIO can be requested by all the PHYs of the same package.
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cryolitia PukNgae cryolitia@uniontech.com
commit 9c6182843b0d02ca04cc1d946954a65a2286c7db upstream.
Applying the quirk of that, the lowest Playback mixer volume setting mutes the audio output, on more devices.
Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/merge_requests/2514 Cc: stable@vger.kernel.org Tested-by: Guoli An anguoli@uniontech.com Signed-off-by: Cryolitia PukNgae cryolitia@uniontech.com Link: https://patch.msgid.link/20250822-mixer-quirk-v1-1-b19252239c1c@uniontech.co... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/usb/mixer_quirks.c | 2 ++ 1 file changed, 2 insertions(+)
--- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -3609,9 +3609,11 @@ void snd_usb_mixer_fu_apply_quirk(struct snd_dragonfly_quirk_db_scale(mixer, cval, kctl); break; /* lowest playback value is muted on some devices */ + case USB_ID(0x0572, 0x1b09): /* Conexant Systems (Rockwell), Inc. */ case USB_ID(0x0d8c, 0x000c): /* C-Media */ case USB_ID(0x0d8c, 0x0014): /* C-Media */ case USB_ID(0x19f7, 0x0003): /* RODE NT-USB */ + case USB_ID(0x2d99, 0x0026): /* HECATE G2 GAMING HEADSET */ if (strstr(kctl->id.name, "Playback")) cval->min_mute = 1; break;
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ma Ke make24@iscas.ac.cn
commit 44822df89e8f3386871d9cad563ece8e2fd8f0e7 upstream.
In __iodyn_find_io_region(), pcmcia_make_resource() is assigned to res and used in pci_bus_alloc_resource(). There is a dereference of res in pci_bus_alloc_resource(), which could lead to a NULL pointer dereference on failure of pcmcia_make_resource().
Fix this bug by adding a check of res.
Cc: stable@vger.kernel.org Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module") Signed-off-by: Ma Ke make24@iscas.ac.cn Signed-off-by: Dominik Brodowski linux@dominikbrodowski.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pcmcia/rsrc_iodyn.c | 3 +++ 1 file changed, 3 insertions(+)
--- a/drivers/pcmcia/rsrc_iodyn.c +++ b/drivers/pcmcia/rsrc_iodyn.c @@ -62,6 +62,9 @@ static struct resource *__iodyn_find_io_ unsigned long min = base; int ret;
+ if (!res) + return NULL; + data.mask = align - 1; data.offset = base & data.mask;
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Harry Yoo harry.yoo@oracle.com
commit 6659d027998083fbb6d42a165b0c90dc2e8ba989 upstream.
Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure page tables are properly synchronized when calling p*d_populate_kernel().
For 5-level paging, synchronization is performed via pgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, so synchronization is instead performed at the P4D level via p4d_populate_kernel().
This fixes intermittent boot failures on systems using 4-level paging and a large amount of persistent memory:
BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK>
It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap before sync_global_pgds() [1]:
BUG: unable to handle page fault for address: ffffeb3ff1200000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI Tainted: [W]=WARN RIP: 0010:vmemmap_set_pmd+0xff/0x230 <TASK> vmemmap_populate_hugepages+0x176/0x180 vmemmap_populate+0x34/0x80 __populate_section_memmap+0x41/0x90 sparse_add_section+0x121/0x3e0 __add_pages+0xba/0x150 add_pages+0x1d/0x70 memremap_pages+0x3dc/0x810 devm_memremap_pages+0x1c/0x60 xe_devm_add+0x8b/0x100 [xe] xe_tile_init_noalloc+0x6a/0x70 [xe] xe_device_probe+0x48c/0x740 [xe] [... snip ...]
Link: https://lkml.kernel.org/r/20250818020206.4517-4-harry.yoo@oracle.com Fixes: 8d400913c231 ("x86/vmemmap: handle unpopulated sub-pmd ranges") Signed-off-by: Harry Yoo harry.yoo@oracle.com Closes: https://lore.kernel.org/linux-mm/20250311114420.240341-1-gwan-gyeong.mun@int... [1] Suggested-by: Dave Hansen dave.hansen@linux.intel.com Acked-by: Kiryl Shutsemau kas@kernel.org Reviewed-by: Mike Rapoport (Microsoft) rppt@kernel.org Reviewed-by: Lorenzo Stoakes lorenzo.stoakes@oracle.com Acked-by: David Hildenbrand david@redhat.com Cc: Alexander Potapenko glider@google.com Cc: Alistair Popple apopple@nvidia.com Cc: Andrey Konovalov andreyknvl@gmail.com Cc: Andrey Ryabinin ryabinin.a.a@gmail.com Cc: Andy Lutomirski luto@kernel.org Cc: "Aneesh Kumar K.V" aneesh.kumar@linux.ibm.com Cc: Anshuman Khandual anshuman.khandual@arm.com Cc: Ard Biesheuvel ardb@kernel.org Cc: Arnd Bergmann arnd@arndb.de Cc: bibo mao maobibo@loongson.cn Cc: Borislav Betkov bp@alien8.de Cc: Christoph Lameter (Ampere) cl@gentwo.org Cc: Dennis Zhou dennis@kernel.org Cc: Dev Jain dev.jain@arm.com Cc: Dmitriy Vyukov dvyukov@google.com Cc: Ingo Molnar mingo@redhat.com Cc: Jane Chu jane.chu@oracle.com Cc: Joao Martins joao.m.martins@oracle.com Cc: Joerg Roedel joro@8bytes.org Cc: John Hubbard jhubbard@nvidia.com Cc: Kevin Brodsky kevin.brodsky@arm.com Cc: Liam Howlett liam.howlett@oracle.com Cc: Michal Hocko mhocko@suse.com Cc: Oscar Salvador osalvador@suse.de Cc: Peter Xu peterx@redhat.com Cc: Peter Zijlstra peterz@infradead.org Cc: Qi Zheng zhengqi.arch@bytedance.com Cc: Ryan Roberts ryan.roberts@arm.com Cc: Suren Baghdasaryan surenb@google.com Cc: Tejun Heo tj@kernel.org Cc: Thomas Gleinxer tglx@linutronix.de Cc: Thomas Huth thuth@redhat.com Cc: "Uladzislau Rezki (Sony)" urezki@gmail.com Cc: Vincenzo Frascino vincenzo.frascino@arm.com Cc: Vlastimil Babka vbabka@suse.cz Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/include/asm/pgtable_64_types.h | 3 +++ arch/x86/mm/init_64.c | 18 ++++++++++++++++++ 2 files changed, 21 insertions(+)
--- a/arch/x86/include/asm/pgtable_64_types.h +++ b/arch/x86/include/asm/pgtable_64_types.h @@ -40,6 +40,9 @@ static inline bool pgtable_l5_enabled(vo #define pgtable_l5_enabled() 0 #endif /* CONFIG_X86_5LEVEL */
+#define ARCH_PAGE_TABLE_SYNC_MASK \ + (pgtable_l5_enabled() ? PGTBL_PGD_MODIFIED : PGTBL_P4D_MODIFIED) + extern unsigned int pgdir_shift; extern unsigned int ptrs_per_p4d;
--- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -219,6 +219,24 @@ static void sync_global_pgds(unsigned lo }
/* + * Make kernel mappings visible in all page tables in the system. + * This is necessary except when the init task populates kernel mappings + * during the boot process. In that case, all processes originating from + * the init task copies the kernel mappings, so there is no issue. + * Otherwise, missing synchronization could lead to kernel crashes due + * to missing page table entries for certain kernel mappings. + * + * Synchronization is performed at the top level, which is the PGD in + * 5-level paging systems. But in 4-level paging systems, however, + * pgd_populate() is a no-op, so synchronization is done at the P4D level. + * sync_global_pgds() handles this difference between paging levels. + */ +void arch_sync_kernel_mappings(unsigned long start, unsigned long end) +{ + sync_global_pgds(start, end); +} + +/* * NOTE: This function is marked __ref because it calls __init function * (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0. */
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Harry Yoo harry.yoo@oracle.com
commit 7cc183f2e67d19b03ee5c13a6664b8c6cc37ff9d upstream.
During our internal testing, we started observing intermittent boot failures when the machine uses 4-level paging and has a large amount of persistent memory:
BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK>
It turns out that the kernel panics while initializing vmemmap (struct page array) when the vmemmap region spans two PGD entries, because the new PGD entry is only installed in init_mm.pgd, but not in the page tables of other tasks.
And looking at __populate_section_memmap(): if (vmemmap_can_optimize(altmap, pgmap)) // does not sync top level page tables r = vmemmap_populate_compound_pages(pfn, start, end, nid, pgmap); else // sync top level page tables in x86 r = vmemmap_populate(start, end, nid, altmap);
In the normal path, vmemmap_populate() in arch/x86/mm/init_64.c synchronizes the top level page table (See commit 9b861528a801 ("x86-64, mem: Update all PGDs for direct mapping and vmemmap mapping changes")) so that all tasks in the system can see the new vmemmap area.
However, when vmemmap_can_optimize() returns true, the optimized path skips synchronization of top-level page tables. This is because vmemmap_populate_compound_pages() is implemented in core MM code, which does not handle synchronization of the top-level page tables. Instead, the core MM has historically relied on each architecture to perform this synchronization manually.
We're not the first party to encounter a crash caused by not-sync'd top level page tables: earlier this year, Gwan-gyeong Mun attempted to address the issue [1] [2] after hitting a kernel panic when x86 code accessed the vmemmap area before the corresponding top-level entries were synced. At that time, the issue was believed to be triggered only when struct page was enlarged for debugging purposes, and the patch did not get further updates.
It turns out that current approach of relying on each arch to handle the page table sync manually is fragile because 1) it's easy to forget to sync the top level page table, and 2) it's also easy to overlook that the kernel should not access the vmemmap and direct mapping areas before the sync.
# The solution: Make page table sync more code robust and harder to miss
To address this, Dave Hansen suggested [3] [4] introducing {pgd,p4d}_populate_kernel() for updating kernel portion of the page tables and allow each architecture to explicitly perform synchronization when installing top-level entries. With this approach, we no longer need to worry about missing the sync step, reducing the risk of future regressions.
The new interface reuses existing ARCH_PAGE_TABLE_SYNC_MASK, PGTBL_P*D_MODIFIED and arch_sync_kernel_mappings() facility used by vmalloc and ioremap to synchronize page tables.
pgd_populate_kernel() looks like this: static inline void pgd_populate_kernel(unsigned long addr, pgd_t *pgd, p4d_t *p4d) { pgd_populate(&init_mm, pgd, p4d); if (ARCH_PAGE_TABLE_SYNC_MASK & PGTBL_PGD_MODIFIED) arch_sync_kernel_mappings(addr, addr); }
It is worth noting that vmalloc() and apply_to_range() carefully synchronizes page tables by calling p*d_alloc_track() and arch_sync_kernel_mappings(), and thus they are not affected by this patch series.
This series was hugely inspired by Dave Hansen's suggestion and hence added Suggested-by: Dave Hansen.
Cc stable because lack of this series opens the door to intermittent boot failures.
This patch (of 3):
Move ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to linux/pgtable.h so that they can be used outside of vmalloc and ioremap.
Link: https://lkml.kernel.org/r/20250818020206.4517-1-harry.yoo@oracle.com Link: https://lkml.kernel.org/r/20250818020206.4517-2-harry.yoo@oracle.com Link: https://lore.kernel.org/linux-mm/20250220064105.808339-1-gwan-gyeong.mun@int... [1] Link: https://lore.kernel.org/linux-mm/20250311114420.240341-1-gwan-gyeong.mun@int... [2] Link: https://lore.kernel.org/linux-mm/d1da214c-53d3-45ac-a8b6-51821c5416e4@intel.... [3] Link: https://lore.kernel.org/linux-mm/4d800744-7b88-41aa-9979-b245e8bf794b@intel.... [4] Fixes: 8d400913c231 ("x86/vmemmap: handle unpopulated sub-pmd ranges") Signed-off-by: Harry Yoo harry.yoo@oracle.com Acked-by: Kiryl Shutsemau kas@kernel.org Reviewed-by: Mike Rapoport (Microsoft) rppt@kernel.org Reviewed-by: "Uladzislau Rezki (Sony)" urezki@gmail.com Reviewed-by: Lorenzo Stoakes lorenzo.stoakes@oracle.com Acked-by: David Hildenbrand david@redhat.com Cc: Alexander Potapenko glider@google.com Cc: Alistair Popple apopple@nvidia.com Cc: Andrey Konovalov andreyknvl@gmail.com Cc: Andrey Ryabinin ryabinin.a.a@gmail.com Cc: Andy Lutomirski luto@kernel.org Cc: "Aneesh Kumar K.V" aneesh.kumar@linux.ibm.com Cc: Anshuman Khandual anshuman.khandual@arm.com Cc: Ard Biesheuvel ardb@kernel.org Cc: Arnd Bergmann arnd@arndb.de Cc: bibo mao maobibo@loongson.cn Cc: Borislav Betkov bp@alien8.de Cc: Christoph Lameter (Ampere) cl@gentwo.org Cc: Dennis Zhou dennis@kernel.org Cc: Dev Jain dev.jain@arm.com Cc: Dmitriy Vyukov dvyukov@google.com Cc: Gwan-gyeong Mun gwan-gyeong.mun@intel.com Cc: Ingo Molnar mingo@redhat.com Cc: Jane Chu jane.chu@oracle.com Cc: Joao Martins joao.m.martins@oracle.com Cc: Joerg Roedel joro@8bytes.org Cc: John Hubbard jhubbard@nvidia.com Cc: Kevin Brodsky kevin.brodsky@arm.com Cc: Liam Howlett liam.howlett@oracle.com Cc: Michal Hocko mhocko@suse.com Cc: Oscar Salvador osalvador@suse.de Cc: Peter Xu peterx@redhat.com Cc: Peter Zijlstra peterz@infradead.org Cc: Qi Zheng zhengqi.arch@bytedance.com Cc: Ryan Roberts ryan.roberts@arm.com Cc: Suren Baghdasaryan surenb@google.com Cc: Tejun Heo tj@kernel.org Cc: Thomas Gleinxer tglx@linutronix.de Cc: Thomas Huth thuth@redhat.com Cc: Vincenzo Frascino vincenzo.frascino@arm.com Cc: Vlastimil Babka vbabka@suse.cz Cc: Dave Hansen dave.hansen@linux.intel.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/pgtable.h | 16 ++++++++++++++++ include/linux/vmalloc.h | 16 ---------------- 2 files changed, 16 insertions(+), 16 deletions(-)
--- a/include/linux/pgtable.h +++ b/include/linux/pgtable.h @@ -1380,6 +1380,22 @@ static inline int pmd_protnone(pmd_t pmd } #endif /* CONFIG_NUMA_BALANCING */
+/* + * Architectures can set this mask to a combination of PGTBL_P?D_MODIFIED values + * and let generic vmalloc and ioremap code know when arch_sync_kernel_mappings() + * needs to be called. + */ +#ifndef ARCH_PAGE_TABLE_SYNC_MASK +#define ARCH_PAGE_TABLE_SYNC_MASK 0 +#endif + +/* + * There is no default implementation for arch_sync_kernel_mappings(). It is + * relied upon the compiler to optimize calls out if ARCH_PAGE_TABLE_SYNC_MASK + * is 0. + */ +void arch_sync_kernel_mappings(unsigned long start, unsigned long end); + #endif /* CONFIG_MMU */
#ifdef CONFIG_HAVE_ARCH_HUGE_VMAP --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -180,22 +180,6 @@ extern int remap_vmalloc_range(struct vm unsigned long pgoff);
/* - * Architectures can set this mask to a combination of PGTBL_P?D_MODIFIED values - * and let generic vmalloc and ioremap code know when arch_sync_kernel_mappings() - * needs to be called. - */ -#ifndef ARCH_PAGE_TABLE_SYNC_MASK -#define ARCH_PAGE_TABLE_SYNC_MASK 0 -#endif - -/* - * There is no default implementation for arch_sync_kernel_mappings(). It is - * relied upon the compiler to optimize calls out if ARCH_PAGE_TABLE_SYNC_MASK - * is 0. - */ -void arch_sync_kernel_mappings(unsigned long start, unsigned long end); - -/* * Lowlevel-APIs (not for driver use!) */
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qianfeng Rong rongqianfeng@vivo.com
commit 0e20450829ca3c1dbc2db536391537c57a40fe0b upstream.
The adapter->chan_stats[] array is initialized in mwifiex_init_channel_scan_gap() with vmalloc(), which doesn't zero out memory. The array is filled in mwifiex_update_chan_statistics() and then the user can query the data in mwifiex_cfg80211_dump_survey().
There are two potential issues here. What if the user calls mwifiex_cfg80211_dump_survey() before the data has been filled in. Also the mwifiex_update_chan_statistics() function doesn't necessarily initialize the whole array. Since the array was not initialized at the start that could result in an information leak.
Also this array is pretty small. It's a maximum of 900 bytes so it's more appropriate to use kcalloc() instead vmalloc().
Cc: stable@vger.kernel.org Fixes: bf35443314ac ("mwifiex: channel statistics support for mwifiex") Suggested-by: Dan Carpenter dan.carpenter@linaro.org Signed-off-by: Qianfeng Rong rongqianfeng@vivo.com Reviewed-by: Dan Carpenter dan.carpenter@linaro.org Link: https://patch.msgid.link/20250815023055.477719-1-rongqianfeng@vivo.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/marvell/mwifiex/cfg80211.c | 5 +++-- drivers/net/wireless/marvell/mwifiex/main.c | 4 ++-- 2 files changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c +++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c @@ -4282,8 +4282,9 @@ int mwifiex_init_channel_scan_gap(struct * additional active scan request for hidden SSIDs on passive channels. */ adapter->num_in_chan_stats = 2 * (n_channels_bg + n_channels_a); - adapter->chan_stats = vmalloc(array_size(sizeof(*adapter->chan_stats), - adapter->num_in_chan_stats)); + adapter->chan_stats = kcalloc(adapter->num_in_chan_stats, + sizeof(*adapter->chan_stats), + GFP_KERNEL);
if (!adapter->chan_stats) return -ENOMEM; --- a/drivers/net/wireless/marvell/mwifiex/main.c +++ b/drivers/net/wireless/marvell/mwifiex/main.c @@ -640,7 +640,7 @@ static int _mwifiex_fw_dpc(const struct goto done;
err_add_intf: - vfree(adapter->chan_stats); + kfree(adapter->chan_stats); err_init_chan_scan: wiphy_unregister(adapter->wiphy); wiphy_free(adapter->wiphy); @@ -1462,7 +1462,7 @@ static void mwifiex_uninit_sw(struct mwi wiphy_free(adapter->wiphy); adapter->wiphy = NULL;
- vfree(adapter->chan_stats); + kfree(adapter->chan_stats); mwifiex_free_cmd_buffers(adapter); }
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher alexander.deucher@amd.com
commit 71403f58b4bb6c13b71c05505593a355f697fd94 upstream.
We already disable the audio pins in hw_fini so there is no need to do it again in sw_fini.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4481 Cc: oushixiong oushixiong1025@163.com Signed-off-by: Alex Deucher alexander.deucher@amd.com (cherry picked from commit 5eeb16ca727f11278b2917fd4311a7d7efb0bbd6) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/amdgpu/dce_v10_0.c | 5 ----- drivers/gpu/drm/amd/amdgpu/dce_v11_0.c | 5 ----- drivers/gpu/drm/amd/amdgpu/dce_v6_0.c | 5 ----- drivers/gpu/drm/amd/amdgpu/dce_v8_0.c | 5 ----- 4 files changed, 20 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c @@ -1464,17 +1464,12 @@ static int dce_v10_0_audio_init(struct a
static void dce_v10_0_audio_fini(struct amdgpu_device *adev) { - int i; - if (!amdgpu_audio) return;
if (!adev->mode_info.audio.enabled) return;
- for (i = 0; i < adev->mode_info.audio.num_pins; i++) - dce_v10_0_audio_enable(adev, &adev->mode_info.audio.pin[i], false); - adev->mode_info.audio.enabled = false; }
--- a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c @@ -1506,17 +1506,12 @@ static int dce_v11_0_audio_init(struct a
static void dce_v11_0_audio_fini(struct amdgpu_device *adev) { - int i; - if (!amdgpu_audio) return;
if (!adev->mode_info.audio.enabled) return;
- for (i = 0; i < adev->mode_info.audio.num_pins; i++) - dce_v11_0_audio_enable(adev, &adev->mode_info.audio.pin[i], false); - adev->mode_info.audio.enabled = false; }
--- a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c @@ -1375,17 +1375,12 @@ static int dce_v6_0_audio_init(struct am
static void dce_v6_0_audio_fini(struct amdgpu_device *adev) { - int i; - if (!amdgpu_audio) return;
if (!adev->mode_info.audio.enabled) return;
- for (i = 0; i < adev->mode_info.audio.num_pins; i++) - dce_v6_0_audio_enable(adev, &adev->mode_info.audio.pin[i], false); - adev->mode_info.audio.enabled = false; }
--- a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c @@ -1427,17 +1427,12 @@ static int dce_v8_0_audio_init(struct am
static void dce_v8_0_audio_fini(struct amdgpu_device *adev) { - int i; - if (!amdgpu_audio) return;
if (!adev->mode_info.audio.enabled) return;
- for (i = 0; i < adev->mode_info.audio.num_pins; i++) - dce_v8_0_audio_enable(adev, &adev->mode_info.audio.pin[i], false); - adev->mode_info.audio.enabled = false; }
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Evans evans1210144@gmail.com
commit 9dba9a45c348e8460da97c450cddf70b2056deb3 upstream.
Fix a use-after-free window by correcting the buffer release sequence in the deferred receive path. The code freed the RQ buffer first and only then cleared the context pointer under the lock. Concurrent paths (e.g., ABTS and the repost path) also inspect and release the same pointer under the lock, so the old order could lead to double-free/UAF.
Note that the repost path already uses the correct pattern: detach the pointer under the lock, then free it after dropping the lock. The deferred path should do the same.
Fixes: 472e146d1cf3 ("scsi: lpfc: Correct upcalling nvmet_fc transport during io done downcall") Cc: stable@vger.kernel.org Signed-off-by: John Evans evans1210144@gmail.com Link: https://lore.kernel.org/r/20250828044008.743-1-evans1210144@gmail.com Reviewed-by: Justin Tee justin.tee@broadcom.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/lpfc/lpfc_nvmet.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/scsi/lpfc/lpfc_nvmet.c +++ b/drivers/scsi/lpfc/lpfc_nvmet.c @@ -1244,7 +1244,7 @@ lpfc_nvmet_defer_rcv(struct nvmet_fc_tar struct lpfc_nvmet_tgtport *tgtp; struct lpfc_async_xchg_ctx *ctxp = container_of(rsp, struct lpfc_async_xchg_ctx, hdlrctx.fcp_req); - struct rqb_dmabuf *nvmebuf = ctxp->rqb_buffer; + struct rqb_dmabuf *nvmebuf; struct lpfc_hba *phba = ctxp->phba; unsigned long iflag;
@@ -1252,13 +1252,18 @@ lpfc_nvmet_defer_rcv(struct nvmet_fc_tar lpfc_nvmeio_data(phba, "NVMET DEFERRCV: xri x%x sz %d CPU %02x\n", ctxp->oxid, ctxp->size, raw_smp_processor_id());
+ spin_lock_irqsave(&ctxp->ctxlock, iflag); + nvmebuf = ctxp->rqb_buffer; if (!nvmebuf) { + spin_unlock_irqrestore(&ctxp->ctxlock, iflag); lpfc_printf_log(phba, KERN_INFO, LOG_NVME_IOERR, "6425 Defer rcv: no buffer oxid x%x: " "flg %x ste %x\n", ctxp->oxid, ctxp->flag, ctxp->state); return; } + ctxp->rqb_buffer = NULL; + spin_unlock_irqrestore(&ctxp->ctxlock, iflag);
tgtp = phba->targetport->private; if (tgtp) @@ -1266,9 +1271,6 @@ lpfc_nvmet_defer_rcv(struct nvmet_fc_tar
/* Free the nvmebuf since a new buffer already replaced it */ nvmebuf->hrq->rqbp->rqb_free_buffer(phba, nvmebuf); - spin_lock_irqsave(&ctxp->ctxlock, iflag); - ctxp->rqb_buffer = NULL; - spin_unlock_irqrestore(&ctxp->ctxlock, iflag); }
/**
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislav Fort stanislav.fort@aisle.com
commit d77b6ff0ce35a6d0b0b7b9581bc3f76d041d4087 upstream.
batadv_nc_skb_decode_packet() trusts coded_len and checks only against skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing payload headroom, and the source skb length is not verified, allowing an out-of-bounds read and a small out-of-bounds write.
Validate that coded_len fits within the payload area of both destination and source sk_buffs before XORing.
Fixes: 2df5278b0267 ("batman-adv: network coding - receive coded packets and decode them") Cc: stable@vger.kernel.org Reported-by: Stanislav Fort disclosure@aisle.com Signed-off-by: Stanislav Fort stanislav.fort@aisle.com Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/batman-adv/network-coding.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
--- a/net/batman-adv/network-coding.c +++ b/net/batman-adv/network-coding.c @@ -1691,7 +1691,12 @@ batadv_nc_skb_decode_packet(struct batad
coding_len = ntohs(coded_packet_tmp.coded_len);
- if (coding_len > skb->len) + /* ensure dst buffer is large enough (payload only) */ + if (coding_len + h_size > skb->len) + return NULL; + + /* ensure src buffer is large enough (payload only) */ + if (coding_len + h_size > nc_packet->skb->len) return NULL;
/* Here the magic is reversed:
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vitaly Lifshits vitaly.lifshits@intel.com
commit 90fb7db49c6dbac961c6b8ebfd741141ffbc8545 upstream.
Fix a possible heap overflow in e1000_set_eeprom function by adding input validation for the requested length of the change in the EEPROM. In addition, change the variable type from int to size_t for better code practices and rearrange declarations to RCT.
Cc: stable@vger.kernel.org Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Co-developed-by: Mikael Wessel post@mikaelkw.online Signed-off-by: Mikael Wessel post@mikaelkw.online Signed-off-by: Vitaly Lifshits vitaly.lifshits@intel.com Tested-by: Mor Bar-Gabay morx.bar.gabay@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/intel/e1000e/ethtool.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -559,12 +559,12 @@ static int e1000_set_eeprom(struct net_d { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + size_t total_len, max_len; u16 *eeprom_buff; - void *ptr; - int max_len; + int ret_val = 0; int first_word; int last_word; - int ret_val = 0; + void *ptr; u16 i;
if (eeprom->len == 0) @@ -579,6 +579,10 @@ static int e1000_set_eeprom(struct net_d
max_len = hw->nvm.word_size * 2;
+ if (check_add_overflow(eeprom->offset, eeprom->len, &total_len) || + total_len > max_len) + return -EFBIG; + first_word = eeprom->offset >> 1; last_word = (eeprom->offset + eeprom->len - 1) >> 1; eeprom_buff = kmalloc(max_len, GFP_KERNEL);
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jann Horn jannh@google.com
commit 023f47a8250c6bdb4aebe744db4bf7f73414028b upstream.
If an ->anon_vma is attached to the VMA, collapse_and_free_pmd() requires it to be locked.
Page table traversal is allowed under any one of the mmap lock, the anon_vma lock (if the VMA is associated with an anon_vma), and the mapping lock (if the VMA is associated with a mapping); and so to be able to remove page tables, we must hold all three of them. retract_page_tables() bails out if an ->anon_vma is attached, but does this check before holding the mmap lock (as the comment above the check explains).
If we racily merged an existing ->anon_vma (shared with a child process) from a neighboring VMA, subsequent rmap traversals on pages belonging to the child will be able to see the page tables that we are concurrently removing while assuming that nothing else can access them.
Repeat the ->anon_vma check once we hold the mmap lock to ensure that there really is no concurrent page table access.
Hitting this bug causes a lockdep warning in collapse_and_free_pmd(), in the line "lockdep_assert_held_write(&vma->anon_vma->root->rwsem)". It can also lead to use-after-free access.
Link: https://lore.kernel.org/linux-mm/CAG48ez3434wZBKFFbdx4M9j6eUwSUVPd4dxhzW_k_P... Link: https://lkml.kernel.org/r/20230111133351.807024-1-jannh@google.com Fixes: f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Jann Horn jannh@google.com Reported-by: Zach O'Keefe zokeefe@google.com Acked-by: Kirill A. Shutemov kirill.shutemov@intel.linux.com Reviewed-by: Yang Shi shy828301@gmail.com Cc: David Hildenbrand david@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org [doebel@amazon.de: Kernel 5.15 uses a different control flow pattern, context adjustments.] Signed-off-by: Bjoern Doebel doebel@amazon.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/khugepaged.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
--- a/mm/khugepaged.c +++ b/mm/khugepaged.c @@ -1609,7 +1609,7 @@ static void retract_page_tables(struct a * has higher cost too. It would also probably require locking * the anon_vma. */ - if (vma->anon_vma) + if (READ_ONCE(vma->anon_vma)) continue; addr = vma->vm_start + ((pgoff - vma->vm_pgoff) << PAGE_SHIFT); if (addr & ~HPAGE_PMD_MASK) @@ -1631,6 +1631,19 @@ static void retract_page_tables(struct a if (!khugepaged_test_exit(mm)) { struct mmu_notifier_range range;
+ /* + * Re-check whether we have an ->anon_vma, because + * collapse_and_free_pmd() requires that either no + * ->anon_vma exists or the anon_vma is locked. + * We already checked ->anon_vma above, but that check + * is racy because ->anon_vma can be populated under the + * mmap lock in read mode. + */ + if (vma->anon_vma) { + mmap_write_unlock(mm); + continue; + } + mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, NULL, mm, addr,
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Rafael J. Wysocki" rafael.j.wysocki@intel.com
[ Upstream commit 79443a7e9da3c9f68290a8653837e23aba0fa89f ]
The handling of the limits_changed flag in struct sugov_policy needs to be explicitly synchronized to ensure that cpufreq policy limits updates will not be missed in some cases.
Without that synchronization it is theoretically possible that the limits_changed update in sugov_should_update_freq() will be reordered with respect to the reads of the policy limits in cpufreq_driver_resolve_freq() and in that case, if the limits_changed update in sugov_limits() clobbers the one in sugov_should_update_freq(), the new policy limits may not take effect for a long time.
Likewise, the limits_changed update in sugov_limits() may theoretically get reordered with respect to the updates of the policy limits in cpufreq_set_policy() and if sugov_should_update_freq() runs between them, the policy limits change may be missed.
To ensure that the above situations will not take place, add memory barriers preventing the reordering in question from taking place and add READ_ONCE() and WRITE_ONCE() annotations around all of the limits_changed flag updates to prevent the compiler from messing up with that code.
Fixes: 600f5badb78c ("cpufreq: schedutil: Don't skip freq update when limits change") Cc: 5.3+ stable@vger.kernel.org # 5.3+ Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Reviewed-by: Christian Loehle christian.loehle@arm.com Link: https://patch.msgid.link/3376719.44csPzL39Z@rjwysocki.net [ bw_min => bw_dl ] Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/sched/cpufreq_schedutil.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-)
--- a/kernel/sched/cpufreq_schedutil.c +++ b/kernel/sched/cpufreq_schedutil.c @@ -89,9 +89,20 @@ static bool sugov_should_update_freq(str if (!cpufreq_this_cpu_can_update(sg_policy->policy)) return false;
- if (unlikely(sg_policy->limits_changed)) { - sg_policy->limits_changed = false; + if (unlikely(READ_ONCE(sg_policy->limits_changed))) { + WRITE_ONCE(sg_policy->limits_changed, false); sg_policy->need_freq_update = true; + + /* + * The above limits_changed update must occur before the reads + * of policy limits in cpufreq_driver_resolve_freq() or a policy + * limits update might be missed, so use a memory barrier to + * ensure it. + * + * This pairs with the write memory barrier in sugov_limits(). + */ + smp_mb(); + return true; }
@@ -326,7 +337,7 @@ static inline bool sugov_cpu_is_busy(str static inline void ignore_dl_rate_limit(struct sugov_cpu *sg_cpu) { if (cpu_bw_dl(cpu_rq(sg_cpu->cpu)) > sg_cpu->bw_dl) - sg_cpu->sg_policy->limits_changed = true; + WRITE_ONCE(sg_cpu->sg_policy->limits_changed, true); }
static inline bool sugov_update_single_common(struct sugov_cpu *sg_cpu, @@ -826,7 +837,16 @@ static void sugov_limits(struct cpufreq_ mutex_unlock(&sg_policy->work_lock); }
- sg_policy->limits_changed = true; + /* + * The limits_changed update below must take place before the updates + * of policy limits in cpufreq_set_policy() or a policy limits update + * might be missed, so use a memory barrier to ensure it. + * + * This pairs with the memory barrier in sugov_should_update_freq(). + */ + smp_wmb(); + + WRITE_ONCE(sg_policy->limits_changed, true); }
struct cpufreq_governor schedutil_gov = {
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson seanjc@google.com
[ Upstream commit f1fb088d9cecde5c3066d8ff8846789667519b7d ]
Take irqfds.lock when adding/deleting an IRQ bypass producer to ensure irqfd->producer isn't modified while kvm_irq_routing_update() is running. The only lock held when a producer is added/removed is irqbypass's mutex.
Fixes: 872768800652 ("KVM: x86: select IRQ_BYPASS_MANAGER") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson seanjc@google.com Message-ID: 20250404193923.1413163-5-seanjc@google.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com [ Adjust context ] Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kvm/x86.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -12449,16 +12449,22 @@ int kvm_arch_irq_bypass_add_producer(str { struct kvm_kernel_irqfd *irqfd = container_of(cons, struct kvm_kernel_irqfd, consumer); + struct kvm *kvm = irqfd->kvm; int ret;
- irqfd->producer = prod; kvm_arch_start_assignment(irqfd->kvm); + + spin_lock_irq(&kvm->irqfds.lock); + irqfd->producer = prod; + ret = static_call(kvm_x86_update_pi_irte)(irqfd->kvm, prod->irq, irqfd->gsi, 1); - if (ret) kvm_arch_end_assignment(irqfd->kvm);
+ spin_unlock_irq(&kvm->irqfds.lock); + + return ret; }
@@ -12468,9 +12474,9 @@ void kvm_arch_irq_bypass_del_producer(st int ret; struct kvm_kernel_irqfd *irqfd = container_of(cons, struct kvm_kernel_irqfd, consumer); + struct kvm *kvm = irqfd->kvm;
WARN_ON(irqfd->producer != prod); - irqfd->producer = NULL;
/* * When producer of consumer is unregistered, we change back to @@ -12478,11 +12484,17 @@ void kvm_arch_irq_bypass_del_producer(st * when the irq is masked/disabled or the consumer side (KVM * int this case doesn't want to receive the interrupts. */ + spin_lock_irq(&kvm->irqfds.lock); + irqfd->producer = NULL; + ret = static_call(kvm_x86_update_pi_irte)(irqfd->kvm, prod->irq, irqfd->gsi, 0); if (ret) printk(KERN_INFO "irq bypass consumer (token %p) unregistration" " fails: %d\n", irqfd->consumer.token, ret);
+ spin_unlock_irq(&kvm->irqfds.lock); + + kvm_arch_end_assignment(irqfd->kvm); }
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Danilenko al.b.danilenko@gmail.com
[ Upstream commit 373c36bf7914e3198ac2654dede499f340c52950 ]
cs_setup, cs_hold and cs_inactive points to fields of spi_device struct, so there is no sense in checking them for NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter") Signed-off-by: Alexander Danilenko al.b.danilenko@gmail.com Link: https://lore.kernel.org/r/20230815092058.4083-1-al.b.danilenko@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Stable-dep-of: 4426e6b4ecf6 ("spi: tegra114: Don't fail set_cs_timing when delays are zero") Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/spi/spi-tegra114.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-)
--- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -723,27 +723,23 @@ static int tegra_spi_set_hw_cs_timing(st struct spi_delay *setup = &spi->cs_setup; struct spi_delay *hold = &spi->cs_hold; struct spi_delay *inactive = &spi->cs_inactive; - u8 setup_dly, hold_dly, inactive_dly; + u8 setup_dly, hold_dly; u32 setup_hold; u32 spi_cs_timing; u32 inactive_cycles; u8 cs_state;
- if ((setup && setup->unit != SPI_DELAY_UNIT_SCK) || - (hold && hold->unit != SPI_DELAY_UNIT_SCK) || - (inactive && inactive->unit != SPI_DELAY_UNIT_SCK)) { + if (setup->unit != SPI_DELAY_UNIT_SCK || + hold->unit != SPI_DELAY_UNIT_SCK || + inactive->unit != SPI_DELAY_UNIT_SCK) { dev_err(&spi->dev, "Invalid delay unit %d, should be SPI_DELAY_UNIT_SCK\n", SPI_DELAY_UNIT_SCK); return -EINVAL; }
- setup_dly = setup ? setup->value : 0; - hold_dly = hold ? hold->value : 0; - inactive_dly = inactive ? inactive->value : 0; - - setup_dly = min_t(u8, setup_dly, MAX_SETUP_HOLD_CYCLES); - hold_dly = min_t(u8, hold_dly, MAX_SETUP_HOLD_CYCLES); + setup_dly = min_t(u8, setup->value, MAX_SETUP_HOLD_CYCLES); + hold_dly = min_t(u8, hold->value, MAX_SETUP_HOLD_CYCLES); if (setup_dly && hold_dly) { setup_hold = SPI_SETUP_HOLD(setup_dly - 1, hold_dly - 1); spi_cs_timing = SPI_CS_SETUP_HOLD(tspi->spi_cs_timing1, @@ -755,7 +751,7 @@ static int tegra_spi_set_hw_cs_timing(st } }
- inactive_cycles = min_t(u8, inactive_dly, MAX_INACTIVE_CYCLES); + inactive_cycles = min_t(u8, inactive->value, MAX_INACTIVE_CYCLES); if (inactive_cycles) inactive_cycles--; cs_state = inactive_cycles ? 0 : 1;
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aaron Kling webgeek1234@gmail.com
[ Upstream commit 4426e6b4ecf632bb75d973051e1179b8bfac2320 ]
The original code would skip null delay pointers, but when the pointers were converted to point within the spi_device struct, the check was not updated to skip delays of zero. Hence all spi devices that didn't set delays would fail to probe.
Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter") Cc: stable@vger.kernel.org Signed-off-by: Aaron Kling webgeek1234@gmail.com Link: https://patch.msgid.link/20250423-spi-tegra114-v1-1-2d608bcc12f9@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/spi/spi-tegra114.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -729,9 +729,9 @@ static int tegra_spi_set_hw_cs_timing(st u32 inactive_cycles; u8 cs_state;
- if (setup->unit != SPI_DELAY_UNIT_SCK || - hold->unit != SPI_DELAY_UNIT_SCK || - inactive->unit != SPI_DELAY_UNIT_SCK) { + if ((setup->unit && setup->unit != SPI_DELAY_UNIT_SCK) || + (hold->unit && hold->unit != SPI_DELAY_UNIT_SCK) || + (inactive->unit && inactive->unit != SPI_DELAY_UNIT_SCK)) { dev_err(&spi->dev, "Invalid delay unit %d, should be SPI_DELAY_UNIT_SCK\n", SPI_DELAY_UNIT_SCK);
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Lechner dlechner@baylibre.com
[ Upstream commit 6ffa698674053e82e811520642db2650d00d2c01 ]
Follow the pattern of other drivers and use aligned_s64 for the timestamp. This will ensure that the timestamp is correctly aligned on all architectures.
Also move the unaligned.h header while touching this since it was the only one not in alphabetical order.
Fixes: 13e945631c2f ("iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.") Signed-off-by: David Lechner dlechner@baylibre.com Reviewed-by: Nuno Sá nuno.sa@analog.com Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-4-eafac1e2... Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com [ linux/unaligned.h => asm/unaligned.h ] Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/chemical/pms7003.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/iio/chemical/pms7003.c +++ b/drivers/iio/chemical/pms7003.c @@ -5,7 +5,6 @@ * Copyright (c) Tomasz Duszynski tduszyns@gmail.com */
-#include <asm/unaligned.h> #include <linux/completion.h> #include <linux/device.h> #include <linux/errno.h> @@ -19,6 +18,8 @@ #include <linux/module.h> #include <linux/mutex.h> #include <linux/serdev.h> +#include <linux/types.h> +#include <asm/unaligned.h>
#define PMS7003_DRIVER_NAME "pms7003"
@@ -76,7 +77,7 @@ struct pms7003_state { /* Used to construct scan to push to the IIO buffer */ struct { u16 data[3]; /* PM1, PM2P5, PM10 */ - s64 ts; + aligned_s64 ts; } scan; };
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Luca Ceresoli luca.ceresoli@bootlin.com
[ Upstream commit f063a28002e3350088b4577c5640882bf4ea17ea ]
The threaded IRQ function in this driver is reading the flag twice: once to lock a mutex and once to unlock it. Even though the code setting the flag is designed to prevent it, there are subtle cases where the flag could be true at the mutex_lock stage and false at the mutex_unlock stage. This results in the mutex not being unlocked, resulting in a deadlock.
Fix it by making the opt3001_irq() code generally more robust, reading the flag into a variable and using the variable value at both stages.
Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor") Cc: stable@vger.kernel.org Signed-off-by: Luca Ceresoli luca.ceresoli@bootlin.com Link: https://patch.msgid.link/20250321-opt3001-irq-fix-v1-1-6c520d851562@bootlin.... Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com [ Adjust context ] Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/light/opt3001.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/iio/light/opt3001.c +++ b/drivers/iio/light/opt3001.c @@ -692,8 +692,9 @@ static irqreturn_t opt3001_irq(int irq, struct opt3001 *opt = iio_priv(iio); int ret; bool wake_result_ready_queue = false; + bool ok_to_ignore_lock = opt->ok_to_ignore_lock;
- if (!opt->ok_to_ignore_lock) + if (!ok_to_ignore_lock) mutex_lock(&opt->lock);
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION); @@ -730,7 +731,7 @@ static irqreturn_t opt3001_irq(int irq, }
out: - if (!opt->ok_to_ignore_lock) + if (!ok_to_ignore_lock) mutex_unlock(&opt->lock);
if (wake_result_ready_queue)
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Emanuele Ghidoli emanuele.ghidoli@toradex.com
[ Upstream commit 3e38f946062b4845961ab86b726651b4457b2af8 ]
If an input changes state during wake-up and is used as an interrupt source, the IRQ handler reads the volatile input register to clear the interrupt mask and deassert the IRQ line. However, the IRQ handler is triggered before access to the register is granted, causing the read operation to fail.
As a result, the IRQ handler enters a loop, repeatedly printing the "failed reading register" message, until `pca953x_resume()` is eventually called, which restores the driver context and enables access to registers.
Fix by disabling the IRQ line before entering suspend mode, and re-enabling it after the driver context is restored in `pca953x_resume()`.
An IRQ can be disabled with disable_irq() and still wake the system as long as the IRQ has wake enabled, so the wake-up functionality is preserved.
Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle") Cc: stable@vger.kernel.org Signed-off-by: Emanuele Ghidoli emanuele.ghidoli@toradex.com Signed-off-by: Francesco Dolcini francesco.dolcini@toradex.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Tested-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://lore.kernel.org/r/20250512095441.31645-1-francesco@dolcini.it Signed-off-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org [ Apply directly to suspend/resume functions ] Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpio/gpio-pca953x.c | 5 +++++ 1 file changed, 5 insertions(+)
--- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -1145,6 +1145,9 @@ static int pca953x_suspend(struct device struct pca953x_chip *chip = dev_get_drvdata(dev);
mutex_lock(&chip->i2c_lock); + /* Disable IRQ to prevent early triggering while regmap "cache only" is on */ + if (chip->client->irq > 0) + disable_irq(chip->client->irq); regcache_cache_only(chip->regmap, true); mutex_unlock(&chip->i2c_lock);
@@ -1170,6 +1173,8 @@ static int pca953x_resume(struct device }
mutex_lock(&chip->i2c_lock); + if (chip->client->irq > 0) + enable_irq(chip->client->irq); regcache_cache_only(chip->regmap, false); regcache_mark_dirty(chip->regmap); ret = pca953x_regcache_sync(dev);
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hyejeong Choi hjeong.choi@samsung.com
[ Upstream commit 72c7d62583ebce7baeb61acce6057c361f73be4a ]
smp_store_mb() inserts memory barrier after storing operation. It is different with what the comment is originally aiming so Null pointer dereference can be happened if memory update is reordered.
Signed-off-by: Hyejeong Choi hjeong.choi@samsung.com Fixes: a590d0fdbaa5 ("dma-buf: Update reservation shared_count after adding the new fence") CC: stable@vger.kernel.org Reviewed-by: Christian König christian.koenig@amd.com Link: https://lore.kernel.org/r/20250513020638.GA2329653@au1-maretx-p37.eng.sarc.s... Signed-off-by: Christian König christian.koenig@amd.com [ adjusted `fobj->num_fences` to `fobj->shared_count` ] Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/dma-buf/dma-resv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/dma-buf/dma-resv.c +++ b/drivers/dma-buf/dma-resv.c @@ -267,8 +267,9 @@ void dma_resv_add_shared_fence(struct dm
replace: RCU_INIT_POINTER(fobj->shared[i], fence); - /* pointer update must be visible before we extend the shared_count */ - smp_store_mb(fobj->shared_count, count); + /* fence update must be visible before we extend the shared_count */ + smp_wmb(); + fobj->shared_count = count;
write_seqcount_end(&obj->seq); dma_fence_put(old);
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qiu-ji Chen chenqiuji666@gmail.com
[ Upstream commit 157ae5ffd76a2857ccb4b7ce40bc5a344ca00395 ]
Fix a potential deadlock bug. Observe that in the mtk-cqdma.c file, functions like mtk_cqdma_issue_pending() and mtk_cqdma_free_active_desc() properly acquire the pc lock before the vc lock when handling pc and vc fields. However, mtk_cqdma_tx_status() violates this order by first acquiring the vc lock before invoking mtk_cqdma_find_active_desc(), which subsequently takes the pc lock. This reversed locking sequence (vc → pc) contradicts the established pc → vc order and creates deadlock risks.
Fix the issue by moving the vc lock acquisition code from mtk_cqdma_find_active_desc() to mtk_cqdma_tx_status(). Ensure the pc lock is acquired before the vc lock in the calling function to maintain correct locking hierarchy. Note that since mtk_cqdma_find_active_desc() is a static function with only one caller (mtk_cqdma_tx_status()), this modification safely eliminates the deadlock possibility without affecting other components.
This possible bug is found by an experimental static analysis tool developed by our team. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including deadlocks, data races and atomicity violations.
Fixes: b1f01e48df5a ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC") Cc: stable@vger.kernel.org Signed-off-by: Qiu-ji Chen chenqiuji666@gmail.com Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Link: https://lore.kernel.org/r/20250508073634.3719-1-chenqiuji666@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/dma/mediatek/mtk-cqdma.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/dma/mediatek/mtk-cqdma.c +++ b/drivers/dma/mediatek/mtk-cqdma.c @@ -421,15 +421,11 @@ static struct virt_dma_desc *mtk_cqdma_f { struct mtk_cqdma_vchan *cvc = to_cqdma_vchan(c); struct virt_dma_desc *vd; - unsigned long flags;
- spin_lock_irqsave(&cvc->pc->lock, flags); list_for_each_entry(vd, &cvc->pc->queue, node) if (vd->tx.cookie == cookie) { - spin_unlock_irqrestore(&cvc->pc->lock, flags); return vd; } - spin_unlock_irqrestore(&cvc->pc->lock, flags);
list_for_each_entry(vd, &cvc->vc.desc_issued, node) if (vd->tx.cookie == cookie) @@ -453,9 +449,11 @@ static enum dma_status mtk_cqdma_tx_stat if (ret == DMA_COMPLETE || !txstate) return ret;
+ spin_lock_irqsave(&cvc->pc->lock, flags); spin_lock_irqsave(&cvc->vc.lock, flags); vd = mtk_cqdma_find_active_desc(c, cookie); spin_unlock_irqrestore(&cvc->vc.lock, flags); + spin_unlock_irqrestore(&cvc->pc->lock, flags);
if (vd) { cvd = to_cqdma_vdesc(vd);
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pieter Van Trappen pieter.van.trappen@cern.ch
[ Upstream commit 3f464b193d40e49299dcd087b10cc3b77cbbea68 ]
Remove magic number 7 by introducing a GENMASK macro instead. Remove magic number 0x80 by using the BIT macro instead.
Signed-off-by: Pieter Van Trappen pieter.van.trappen@cern.ch Reviewed-by: Florian Fainelli florian.fainelli@broadcom.com Link: https://patch.msgid.link/20240909134301.75448-1-vtpieter@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Stable-dep-of: ba54bce747fa ("net: dsa: microchip: linearize skb for tail-tagging switches") Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/dsa/tag_ksz.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/net/dsa/tag_ksz.c +++ b/net/dsa/tag_ksz.c @@ -104,8 +104,9 @@ MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROT
#define KSZ9477_INGRESS_TAG_LEN 2 #define KSZ9477_PTP_TAG_LEN 4 -#define KSZ9477_PTP_TAG_INDICATION 0x80 +#define KSZ9477_PTP_TAG_INDICATION BIT(7)
+#define KSZ9477_TAIL_TAG_EG_PORT_M GENMASK(2, 0) #define KSZ9477_TAIL_TAG_OVERRIDE BIT(9) #define KSZ9477_TAIL_TAG_LOOKUP BIT(10)
@@ -138,7 +139,7 @@ static struct sk_buff *ksz9477_rcv(struc { /* Tag decoding */ u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; - unsigned int port = tag[0] & 7; + unsigned int port = tag[0] & KSZ9477_TAIL_TAG_EG_PORT_M; unsigned int len = KSZ_EGRESS_TAG_LEN;
/* Extra 4-bytes PTP timestamp */
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jakob Unterwurzacher jakobunt@gmail.com
[ Upstream commit ba54bce747fa9e07896c1abd9b48545f7b4b31d2 ]
The pointer arithmentic for accessing the tail tag only works for linear skbs.
For nonlinear skbs, it reads uninitialized memory inside the skb headroom, essentially randomizing the tag. I have observed it gets set to 6 most of the time.
Example where ksz9477_rcv thinks that the packet from port 1 comes from port 6 (which does not exist for the ksz9896 that's in use), dropping the packet. Debug prints added by me (not included in this patch):
[ 256.645337] ksz9477_rcv:323 tag0=6 [ 256.645349] skb len=47 headroom=78 headlen=0 tailroom=0 mac=(64,14) mac_len=14 net=(78,0) trans=78 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0x0 start=0 offset=0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x00f8 pkttype=1 iif=3 priority=0x0 mark=0x0 alloc_cpu=0 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 256.645377] dev name=end1 feat=0x0002e10200114bb3 [ 256.645386] skb headroom: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645395] skb headroom: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645403] skb headroom: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645411] skb headroom: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645420] skb headroom: 00000040: ff ff ff ff ff ff 00 1c 19 f2 e2 db 08 06 [ 256.645428] skb frag: 00000000: 00 01 08 00 06 04 00 01 00 1c 19 f2 e2 db 0a 02 [ 256.645436] skb frag: 00000010: 00 83 00 00 00 00 00 00 0a 02 a0 2f 00 00 00 00 [ 256.645444] skb frag: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 [ 256.645452] ksz_common_rcv:92 dsa_conduit_find_user returned NULL
Call skb_linearize before trying to access the tag.
This patch fixes ksz9477_rcv which is used by the ksz9896 I have at hand, and also applies the same fix to ksz8795_rcv which seems to have the same problem.
Signed-off-by: Jakob Unterwurzacher jakob.unterwurzacher@cherry.de CC: stable@vger.kernel.org Fixes: 016e43a26bab ("net: dsa: ksz: Add KSZ8795 tag code") Fixes: 8b8010fb7876 ("dsa: add support for Microchip KSZ tail tagging") Reviewed-by: Vladimir Oltean olteanv@gmail.com Link: https://patch.msgid.link/20250515072920.2313014-1-jakob.unterwurzacher@cherr... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/dsa/tag_ksz.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-)
--- a/net/dsa/tag_ksz.c +++ b/net/dsa/tag_ksz.c @@ -70,7 +70,12 @@ static struct sk_buff *ksz8795_xmit(stru
static struct sk_buff *ksz8795_rcv(struct sk_buff *skb, struct net_device *dev) { - u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; + u8 *tag; + + if (skb_linearize(skb)) + return NULL; + + tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN;
return ksz_common_rcv(skb, dev, tag[0] & 7, KSZ_EGRESS_TAG_LEN); } @@ -137,10 +142,16 @@ static struct sk_buff *ksz9477_xmit(stru
static struct sk_buff *ksz9477_rcv(struct sk_buff *skb, struct net_device *dev) { - /* Tag decoding */ - u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; - unsigned int port = tag[0] & KSZ9477_TAIL_TAG_EG_PORT_M; unsigned int len = KSZ_EGRESS_TAG_LEN; + unsigned int port; + u8 *tag; + + if (skb_linearize(skb)) + return NULL; + + /* Tag decoding */ + tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; + port = tag[0] & KSZ9477_TAIL_TAG_EG_PORT_M;
/* Extra 4-bytes PTP timestamp */ if (tag[0] & KSZ9477_PTP_TAG_INDICATION)
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ronak Doshi ronak.doshi@broadcom.com
[ Upstream commit 43f0999af011fba646e015f0bb08b6c3002a0170 ]
Currently, when device mtu is updated, vmxnet3 updates netdev mtu, quiesces the device and then reactivates it for the ESXi to know about the new mtu. So, technically the OS stack can start using the new mtu before ESXi knows about the new mtu.
This can lead to issues for TSO packets which use mss as per the new mtu configured. This patch fixes this issue by moving the mtu write after device quiesce.
Cc: stable@vger.kernel.org Fixes: d1a890fa37f2 ("net: VMware virtual Ethernet NIC driver: vmxnet3") Signed-off-by: Ronak Doshi ronak.doshi@broadcom.com Acked-by: Guolin Yang guolin.yang@broadcom.com Changes v1-> v2: Moved MTU write after destroy of rx rings Link: https://patch.msgid.link/20250515190457.8597-1-ronak.doshi@broadcom.com Signed-off-by: Jakub Kicinski kuba@kernel.org [ no WRITE_ONCE() in older trees ] Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/vmxnet3/vmxnet3_drv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -3175,8 +3175,6 @@ vmxnet3_change_mtu(struct net_device *ne struct vmxnet3_adapter *adapter = netdev_priv(netdev); int err = 0;
- netdev->mtu = new_mtu; - /* * Reset_work may be in the middle of resetting the device, wait for its * completion. @@ -3190,6 +3188,7 @@ vmxnet3_change_mtu(struct net_device *ne
/* we need to re-create the rx queue based on the new mtu */ vmxnet3_rq_destroy_all(adapter); + netdev->mtu = new_mtu; vmxnet3_adjust_rx_ring_size(adapter); err = vmxnet3_rq_create_all(adapter); if (err) { @@ -3206,6 +3205,8 @@ vmxnet3_change_mtu(struct net_device *ne "Closing it\n", err); goto out; } + } else { + netdev->mtu = new_mtu; }
out:
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gabor Juhos j4g8y7@gmail.com
[ Upstream commit b04f0d89e880bc2cca6a5c73cf287082c91878da ]
The two alarm LEDs of on the uDPU board are stopped working since commit 78efa53e715e ("leds: Init leds class earlier").
The LEDs are driven by the GPIO{15,16} pins of the North Bridge GPIO controller. These pins are part of the 'spi_quad' pin group for which the 'spi' function is selected via the default pinctrl state of the 'spi' node. This is wrong however, since in order to allow controlling the LEDs, the pins should use the 'gpio' function.
Before the commit mentined above, the 'spi' function is selected first by the pinctrl core before probing the spi driver, but then it gets overridden to 'gpio' implicitly via the devm_gpiod_get_index_optional() call from the 'leds-gpio' driver.
After the commit, the LED subsystem gets initialized before the SPI subsystem, so the function of the pin group remains 'spi' which in turn prevents controlling of the LEDs.
Despite the change of the initialization order, the root cause is that the pinctrl state definition is wrong since its initial commit 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board"),
To fix the problem, override the function in the 'spi_quad_pins' node to 'gpio' and move the pinctrl state definition from the 'spi' node into the 'leds' node.
Cc: stable@vger.kernel.org # needs adjustment for < 6.1 Fixes: 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board") Signed-off-by: Gabor Juhos j4g8y7@gmail.com Signed-off-by: Imre Kaloz kaloz@openwrt.org Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com [ Applied to .dts instead of .dtsi ] Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -28,8 +28,9 @@ };
leds { - pinctrl-names = "default"; compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>;
power1 { label = "udpu:green:power"; @@ -96,8 +97,6 @@
&spi0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>;
m25p80@0 { compatible = "jedec,spi-nor"; @@ -117,6 +116,10 @@ }; };
+&spi_quad_pins { + function = "gpio"; +}; + &pinctrl_nb { i2c1_recovery_pins: i2c1-recovery-pins { groups = "i2c1";
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook kees@kernel.org
[ Upstream commit e136a4062174a9a8d1c1447ca040ea81accfa6a8 ]
When building the randomized replacement tree of struct members, the randstruct GCC plugin would insert, as the first member, a 0-sized void member. This appears as though it was done to catch non-designated ("unnamed") static initializers, which wouldn't be stable since they depend on the original struct layout order.
This was accomplished by having the side-effect of the "void member" tripping an assert in GCC internals (count_type_elements) if the member list ever needed to be counted (e.g. for figuring out the order of members during a non-designated initialization), which would catch impossible type (void) in the struct:
security/landlock/fs.c: In function ‘hook_file_ioctl_common’: security/landlock/fs.c:1745:61: internal compiler error: in count_type_elements, at expr.cc:7075 1745 | .u.op = &(struct lsm_ioctlop_audit) { | ^
static HOST_WIDE_INT count_type_elements (const_tree type, bool for_ctor_p) { switch (TREE_CODE (type)) ... case VOID_TYPE: default: gcc_unreachable (); } }
However this is a redundant safety measure since randstruct uses the __designated_initializer attribute both internally and within the __randomized_layout attribute macro so that this would be enforced by the compiler directly even when randstruct was not enabled (via -Wdesignated-init).
A recent change in Landlock ended up tripping the same member counting routine when using a full-struct copy initializer as part of an anonymous initializer. This, however, is a false positive as the initializer is copying between identical structs (and hence identical layouts). The "path" member is "struct path", a randomized struct, and is being copied to from another "struct path", the "f_path" member:
landlock_log_denial(landlock_cred(file->f_cred), &(struct landlock_request) { .type = LANDLOCK_REQUEST_FS_ACCESS, .audit = { .type = LSM_AUDIT_DATA_IOCTL_OP, .u.op = &(struct lsm_ioctlop_audit) { .path = file->f_path, .cmd = cmd, }, }, ...
As can be seen with the coming randstruct KUnit test, there appears to be no behavioral problems with this kind of initialization when the void member is removed from the randstruct GCC plugin, so remove it.
Reported-by: "Dr. David Alan Gilbert" linux@treblig.org Closes: https://lore.kernel.org/lkml/Z_PRaKx7q70MKgCA@gallifrey/ Reported-by: Mark Brown broonie@kernel.org Closes: https://lore.kernel.org/lkml/20250407-kbuild-disable-gcc-plugins-v1-1-5d46ae... Reported-by: WangYuli wangyuli@uniontech.com Closes: https://lore.kernel.org/lkml/337D5D4887277B27+3c677db3-a8b9-47f0-93a4-780935... Fixes: 313dd1b62921 ("gcc-plugins: Add the randstruct plugin") Signed-off-by: Kees Cook kees@kernel.org Stable-dep-of: f39f18f3c353 ("randstruct: gcc-plugin: Fix attribute addition") Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- scripts/gcc-plugins/randomize_layout_plugin.c | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-)
--- a/scripts/gcc-plugins/randomize_layout_plugin.c +++ b/scripts/gcc-plugins/randomize_layout_plugin.c @@ -377,29 +377,13 @@ static int relayout_struct(tree type)
shuffle(type, (tree *)newtree, shuffle_length);
- /* - * set up a bogus anonymous struct field designed to error out on unnamed struct initializers - * as gcc provides no other way to detect such code - */ - list = make_node(FIELD_DECL); - TREE_CHAIN(list) = newtree[0]; - TREE_TYPE(list) = void_type_node; - DECL_SIZE(list) = bitsize_zero_node; - DECL_NONADDRESSABLE_P(list) = 1; - DECL_FIELD_BIT_OFFSET(list) = bitsize_zero_node; - DECL_SIZE_UNIT(list) = size_zero_node; - DECL_FIELD_OFFSET(list) = size_zero_node; - DECL_CONTEXT(list) = type; - // to satisfy the constify plugin - TREE_READONLY(list) = 1; - for (i = 0; i < num_fields - 1; i++) TREE_CHAIN(newtree[i]) = newtree[i+1]; TREE_CHAIN(newtree[num_fields - 1]) = NULL_TREE;
main_variant = TYPE_MAIN_VARIANT(type); for (variant = main_variant; variant; variant = TYPE_NEXT_VARIANT(variant)) { - TYPE_FIELDS(variant) = list; + TYPE_FIELDS(variant) = newtree[0]; TYPE_ATTRIBUTES(variant) = copy_list(TYPE_ATTRIBUTES(variant)); TYPE_ATTRIBUTES(variant) = tree_cons(get_identifier("randomize_performed"), NULL_TREE, TYPE_ATTRIBUTES(variant)); TYPE_ATTRIBUTES(variant) = tree_cons(get_identifier("designated_init"), NULL_TREE, TYPE_ATTRIBUTES(variant));
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook kees@kernel.org
[ Upstream commit f39f18f3c3531aa802b58a20d39d96e82eb96c14 ]
Based on changes in the 2021 public version of the randstruct out-of-tree GCC plugin[1], more carefully update the attributes on resulting decls, to avoid tripping checks in GCC 15's comptypes_check_enum_int() when it has been configured with "--enable-checking=misc":
arch/arm64/kernel/kexec_image.c:132:14: internal compiler error: in comptypes_check_enum_int, at c/c-typeck.cc:1519 132 | const struct kexec_file_ops kexec_image_ops = { | ^~~~~~~~~~~~~~ internal_error(char const*, ...), at gcc/gcc/diagnostic-global-context.cc:517 fancy_abort(char const*, int, char const*), at gcc/gcc/diagnostic.cc:1803 comptypes_check_enum_int(tree_node*, tree_node*, bool*), at gcc/gcc/c/c-typeck.cc:1519 ...
Link: https://archive.org/download/grsecurity/grsecurity-3.1-5.10.41-202105280954.... [1] Reported-by: Thiago Jung Bauermann thiago.bauermann@linaro.org Closes: https://github.com/KSPP/linux/issues/367 Closes: https://lore.kernel.org/lkml/20250530000646.104457-1-thiago.bauermann@linaro... Reported-by: Ingo Saitz ingo@hannover.ccc.de Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1104745 Fixes: 313dd1b62921 ("gcc-plugins: Add the randstruct plugin") Tested-by: Thiago Jung Bauermann thiago.bauermann@linaro.org Link: https://lore.kernel.org/r/20250530221824.work.623-kees@kernel.org Signed-off-by: Kees Cook kees@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- scripts/gcc-plugins/gcc-common.h | 32 ++++++++++++++++++++++++++ scripts/gcc-plugins/randomize_layout_plugin.c | 22 ++++++++--------- 2 files changed, 43 insertions(+), 11 deletions(-)
--- a/scripts/gcc-plugins/gcc-common.h +++ b/scripts/gcc-plugins/gcc-common.h @@ -137,6 +137,38 @@ static inline tree build_const_char_stri return cstr; }
+static inline void __add_type_attr(tree type, const char *attr, tree args) +{ + tree oldattr; + + if (type == NULL_TREE) + return; + oldattr = lookup_attribute(attr, TYPE_ATTRIBUTES(type)); + if (oldattr != NULL_TREE) { + gcc_assert(TREE_VALUE(oldattr) == args || TREE_VALUE(TREE_VALUE(oldattr)) == TREE_VALUE(args)); + return; + } + + TYPE_ATTRIBUTES(type) = copy_list(TYPE_ATTRIBUTES(type)); + TYPE_ATTRIBUTES(type) = tree_cons(get_identifier(attr), args, TYPE_ATTRIBUTES(type)); +} + +static inline void add_type_attr(tree type, const char *attr, tree args) +{ + tree main_variant = TYPE_MAIN_VARIANT(type); + + __add_type_attr(TYPE_CANONICAL(type), attr, args); + __add_type_attr(TYPE_CANONICAL(main_variant), attr, args); + __add_type_attr(main_variant, attr, args); + + for (type = TYPE_NEXT_VARIANT(main_variant); type; type = TYPE_NEXT_VARIANT(type)) { + if (!lookup_attribute(attr, TYPE_ATTRIBUTES(type))) + TYPE_ATTRIBUTES(type) = TYPE_ATTRIBUTES(main_variant); + + __add_type_attr(TYPE_CANONICAL(type), attr, args); + } +} + #define PASS_INFO(NAME, REF, ID, POS) \ struct register_pass_info NAME##_pass_info = { \ .pass = make_##NAME##_pass(), \ --- a/scripts/gcc-plugins/randomize_layout_plugin.c +++ b/scripts/gcc-plugins/randomize_layout_plugin.c @@ -95,6 +95,9 @@ static tree handle_randomize_layout_attr
if (TYPE_P(*node)) { type = *node; + } else if (TREE_CODE(*node) == FIELD_DECL) { + *no_add_attrs = false; + return NULL_TREE; } else { gcc_assert(TREE_CODE(*node) == TYPE_DECL); type = TREE_TYPE(*node); @@ -381,15 +384,14 @@ static int relayout_struct(tree type) TREE_CHAIN(newtree[i]) = newtree[i+1]; TREE_CHAIN(newtree[num_fields - 1]) = NULL_TREE;
+ add_type_attr(type, "randomize_performed", NULL_TREE); + add_type_attr(type, "designated_init", NULL_TREE); + if (has_flexarray) + add_type_attr(type, "has_flexarray", NULL_TREE); + main_variant = TYPE_MAIN_VARIANT(type); - for (variant = main_variant; variant; variant = TYPE_NEXT_VARIANT(variant)) { + for (variant = main_variant; variant; variant = TYPE_NEXT_VARIANT(variant)) TYPE_FIELDS(variant) = newtree[0]; - TYPE_ATTRIBUTES(variant) = copy_list(TYPE_ATTRIBUTES(variant)); - TYPE_ATTRIBUTES(variant) = tree_cons(get_identifier("randomize_performed"), NULL_TREE, TYPE_ATTRIBUTES(variant)); - TYPE_ATTRIBUTES(variant) = tree_cons(get_identifier("designated_init"), NULL_TREE, TYPE_ATTRIBUTES(variant)); - if (has_flexarray) - TYPE_ATTRIBUTES(type) = tree_cons(get_identifier("has_flexarray"), NULL_TREE, TYPE_ATTRIBUTES(type)); - }
/* * force a re-layout of the main variant @@ -457,10 +459,8 @@ static void randomize_type(tree type) if (lookup_attribute("randomize_layout", TYPE_ATTRIBUTES(TYPE_MAIN_VARIANT(type))) || is_pure_ops_struct(type)) relayout_struct(type);
- for (variant = TYPE_MAIN_VARIANT(type); variant; variant = TYPE_NEXT_VARIANT(variant)) { - TYPE_ATTRIBUTES(type) = copy_list(TYPE_ATTRIBUTES(type)); - TYPE_ATTRIBUTES(type) = tree_cons(get_identifier("randomize_considered"), NULL_TREE, TYPE_ATTRIBUTES(type)); - } + add_type_attr(type, "randomize_considered", NULL_TREE); + #ifdef __DEBUG_PLUGIN fprintf(stderr, "Marking randomize_considered on struct %s\n", ORIG_TYPE_NAME(type)); #ifdef __DEBUG_VERBOSE
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Li Qiong liqiong@nfschina.com
[ Upstream commit b4efccec8d06ceb10a7d34d7b1c449c569d53770 ]
object_err() reports details of an object for further debugging, such as the freelist pointer, redzone, etc. However, if the pointer is invalid, attempting to access object metadata can lead to a crash since it does not point to a valid object.
One known path to the crash is when alloc_consistency_checks() determines the pointer to the allocated object is invalid because of a freelist corruption, and calls object_err() to report it. The debug code should report and handle the corruption gracefully and not crash in the process.
In case the pointer is NULL or check_valid_pointer() returns false for the pointer, only print the pointer value and skip accessing metadata.
Fixes: 81819f0fc828 ("SLUB core") Cc: stable@vger.kernel.org Signed-off-by: Li Qiong liqiong@nfschina.com Reviewed-by: Harry Yoo harry.yoo@oracle.com Reviewed-by: Matthew Wilcox (Oracle) willy@infradead.org Signed-off-by: Vlastimil Babka vbabka@suse.cz [ struct page instead of slab ] Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/slub.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
--- a/mm/slub.c +++ b/mm/slub.c @@ -864,7 +864,12 @@ void object_err(struct kmem_cache *s, st return;
slab_bug(s, "%s", reason); - print_trailer(s, page, object); + if (!object || !check_valid_pointer(s, page, object)) { + print_page_info(page); + pr_err("Invalid pointer 0x%p\n", object); + } else { + print_trailer(s, page, object); + } add_taint(TAINT_BAD_PAGE, LOCKDEP_NOW_UNRELIABLE); }
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai tiwai@suse.de
commit bcd6659d4911c528381531472a0cefbd4003e29e upstream.
It was reported that HP EliteDesk 800 G4 DM 65W (SSID 103c:845a) needs the similar quirk for enabling HDMI outputs, too. This patch adds the corresponding quirk entry.
Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250901115009.27498-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_hdmi.c | 1 + 1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1962,6 +1962,7 @@ static int hdmi_add_cvt(struct hda_codec static const struct snd_pci_quirk force_connect_list[] = { SND_PCI_QUIRK(0x103c, 0x83e2, "HP EliteDesk 800 G4", 1), SND_PCI_QUIRK(0x103c, 0x83ef, "HP MP9 G4 Retail System AMS", 1), + SND_PCI_QUIRK(0x103c, 0x845a, "HP EliteDesk 800 G4 DM 65W", 1), SND_PCI_QUIRK(0x103c, 0x870f, "HP", 1), SND_PCI_QUIRK(0x103c, 0x871a, "HP", 1), SND_PCI_QUIRK(0x103c, 0x8711, "HP", 1),
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wentao Liang vulab@iscas.ac.cn
[ Upstream commit 4a81f78caa53e0633cf311ca1526377d9bff7479 ]
In the do_validate_mem(), the call to add_interval() does not handle errors. If kmalloc() fails in add_interval(), it could result in a null pointer being inserted into the linked list, leading to illegal memory access when sub_interval() is called next.
This patch adds an error handling for the add_interval(). If add_interval() returns an error, the function will return early with the error code.
Fixes: 7b4884ca8853 ("pcmcia: validate late-added resources") Signed-off-by: Wentao Liang vulab@iscas.ac.cn Signed-off-by: Dominik Brodowski linux@dominikbrodowski.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pcmcia/rsrc_nonstatic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index e6c90c0bb7646..58782f21a442a 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -375,7 +375,9 @@ static int do_validate_mem(struct pcmcia_socket *s,
if (validate && !s->fake_cis) { /* move it to the validated data set */ - add_interval(&s_data->mem_db_valid, base, size); + ret = add_interval(&s_data->mem_db_valid, base, size); + if (ret) + return ret; sub_interval(&s_data->mem_db, base, size); }
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Larisa Grigore larisa.grigore@nxp.com
[ Upstream commit 782a7c73078e1301c0c427f21c06377d77dfa541 ]
Commit 6a130448498c ("spi: lpspi: Fix wrong transmission when don't use CONT") breaks transmissions when CONT is used. The TDIE interrupt should not be disabled in all cases. If CONT is used and the TX transfer is not yet completed yet, but the interrupt handler is called because there are characters to be received, TDIE is replaced with FCIE. When the transfer is finally completed, SR_TDF is set but the interrupt handler isn't called again.
Fixes: 6a130448498c ("spi: lpspi: Fix wrong transmission when don't use CONT") Signed-off-by: Larisa Grigore larisa.grigore@nxp.com Signed-off-by: James Clark james.clark@linaro.org Reviewed-by: Frank Li Frank.Li@nxp.com Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-1-6262b9aa9be4@linaro.o... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-fsl-lpspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index bf3f600bdd2c8..7ece48667f52d 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -3,7 +3,7 @@ // Freescale i.MX7ULP LPSPI driver // // Copyright 2016 Freescale Semiconductor, Inc. -// Copyright 2018 NXP Semiconductors +// Copyright 2018, 2023, 2025 NXP
#include <linux/clk.h> #include <linux/completion.h> @@ -755,7 +755,7 @@ static irqreturn_t fsl_lpspi_isr(int irq, void *dev_id) if (temp_SR & SR_MBF || readl(fsl_lpspi->base + IMX7ULP_FSR) & FSR_TXCOUNT) { writel(SR_FCF, fsl_lpspi->base + IMX7ULP_SR); - fsl_lpspi_intctrl(fsl_lpspi, IER_FCIE); + fsl_lpspi_intctrl(fsl_lpspi, IER_FCIE | (temp_IER & IER_TDIE)); return IRQ_HANDLED; }
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Larisa Grigore larisa.grigore@nxp.com
[ Upstream commit cbe33705864ba2697a2939de715b81538cf32430 ]
The driver currently supports multiple chip-selects, but only sets the polarity for the first one (CS 0). Fix it by setting the PCSPOL bit for the desired chip-select.
Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver") Signed-off-by: Larisa Grigore larisa.grigore@nxp.com Signed-off-by: James Clark james.clark@linaro.org Reviewed-by: Frank Li Frank.Li@nxp.com Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-2-6262b9aa9be4@linaro.o... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-fsl-lpspi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index 7ece48667f52d..ab096368a1fd5 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -5,6 +5,7 @@ // Copyright 2016 Freescale Semiconductor, Inc. // Copyright 2018, 2023, 2025 NXP
+#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/completion.h> #include <linux/delay.h> @@ -71,7 +72,7 @@ #define DER_TDDE BIT(0) #define CFGR1_PCSCFG BIT(27) #define CFGR1_PINCFG (BIT(24)|BIT(25)) -#define CFGR1_PCSPOL BIT(8) +#define CFGR1_PCSPOL_MASK GENMASK(11, 8) #define CFGR1_NOSTALL BIT(3) #define CFGR1_MASTER BIT(0) #define FSR_TXCOUNT (0xFF) @@ -395,7 +396,9 @@ static int fsl_lpspi_config(struct fsl_lpspi_data *fsl_lpspi) else temp = CFGR1_PINCFG; if (fsl_lpspi->config.mode & SPI_CS_HIGH) - temp |= CFGR1_PCSPOL; + temp |= FIELD_PREP(CFGR1_PCSPOL_MASK, + BIT(fsl_lpspi->config.chip_select)); + writel(temp, fsl_lpspi->base + IMX7ULP_CFGR1);
temp = readl(fsl_lpspi->base + IMX7ULP_CR);
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Larisa Grigore larisa.grigore@nxp.com
[ Upstream commit e811b088a3641861fc9d2b2b840efc61a0f1907d ]
In DMA mode fsl_lpspi_reset() is always called at the end, even when the transfer is aborted. In PIO mode aborts skip the reset leaving the FIFO filled and the module enabled.
Fix it by always calling fsl_lpspi_reset().
Fixes: a15dc3d657fa ("spi: lpspi: Fix CLK pin becomes low before one transfer") Signed-off-by: Larisa Grigore larisa.grigore@nxp.com Reviewed-by: Frank Li Frank.Li@nxp.com Signed-off-by: James Clark james.clark@linaro.org Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-3-6262b9aa9be4@linaro.o... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-fsl-lpspi.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index ab096368a1fd5..319cd96bd201b 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -705,12 +705,10 @@ static int fsl_lpspi_pio_transfer(struct spi_controller *controller, fsl_lpspi_write_tx_fifo(fsl_lpspi);
ret = fsl_lpspi_wait_for_completion(controller); - if (ret) - return ret;
fsl_lpspi_reset(fsl_lpspi);
- return 0; + return ret; }
static int fsl_lpspi_transfer_one(struct spi_controller *controller,
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Walle mwalle@kernel.org
[ Upstream commit bdd5a14e660062114bdebaef9ad52adf04970a89 ]
The bridge has three bootstrap pins which are sampled to determine the frequency of the external reference clock. The driver will also (over)write that setting. But it seems this is racy after the bridge is enabled. It was observed that although the driver write the correct value (by sniffing on the I2C bus), the register has the wrong value. The datasheet states that the GPIO lines have to be stable for at least 5us after asserting the EN signal. Thus, there seems to be some logic which samples the GPIO lines and this logic appears to overwrite the register value which was set by the driver. Waiting 20us after asserting the EN line resolves this issue.
Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver") Signed-off-by: Michael Walle mwalle@kernel.org Reviewed-by: Douglas Anderson dianders@chromium.org Signed-off-by: Douglas Anderson dianders@chromium.org Link: https://lore.kernel.org/r/20250821122341.1257286-1-mwalle@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/bridge/ti-sn65dsi86.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index 1c9dd62d3c47b..1187bfb449f29 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -313,6 +313,17 @@ static int __maybe_unused ti_sn65dsi86_resume(struct device *dev)
gpiod_set_value(pdata->enable_gpio, 1);
+ /* + * After EN is deasserted and an external clock is detected, the bridge + * will sample GPIO3:1 to determine its frequency. The driver will + * overwrite this setting in ti_sn_bridge_set_refclk_freq(). But this is + * racy. Thus we have to wait a couple of us. According to the datasheet + * the GPIO lines has to be stable at least 5 us (td5) but it seems that + * is not enough and the refclk frequency value is still lost or + * overwritten by the bridge itself. Waiting for 20us seems to work. + */ + usleep_range(20, 30); + /* * If we have a reference clock we can enable communication w/ the * panel (including the aux channel) w/out any need for an input clock
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ian Rogers irogers@google.com
[ Upstream commit d7b67dd6f9db7bd2c49b415e901849b182ff0735 ]
Calls to perf_env__insert_bpf_prog_info may fail as a sideband thread may already have inserted the bpf_prog_info. Such failures may yield info_linear being freed which then causes use-after-free issues with the internal bpf_prog_info info struct. Make it so that perf_env__insert_bpf_prog_info trigger early non-error paths and fix the use-after-free in perf_event__synthesize_one_bpf_prog. Add proper return error handling to perf_env__add_bpf_info (that calls perf_env__insert_bpf_prog_info) and propagate the return value in its callers.
Closes: https://lore.kernel.org/lkml/CAP-5=fWJQcmUOP7MuCA2ihKnDAHUCOBLkQFEkQES-1ZZTr... Fixes: 03edb7020bb9 ("perf bpf: Fix two memory leakages when calling perf_env__insert_bpf_prog_info()") Reviewed-by: Namhyung Kim namhyung@kernel.org Signed-off-by: Ian Rogers irogers@google.com Link: https://lore.kernel.org/r/20250902181713.309797-2-irogers@google.com Signed-off-by: Namhyung Kim namhyung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/bpf-event.c | 39 +++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-)
diff --git a/tools/perf/util/bpf-event.c b/tools/perf/util/bpf-event.c index 41b889ab4d6ab..e96a7fdfe283b 100644 --- a/tools/perf/util/bpf-event.c +++ b/tools/perf/util/bpf-event.c @@ -301,9 +301,15 @@ static int perf_event__synthesize_one_bpf_prog(struct perf_session *session,
info_node->info_linear = info_linear; if (!perf_env__insert_bpf_prog_info(env, info_node)) { - free(info_linear); + /* + * Insert failed, likely because of a duplicate event + * made by the sideband thread. Ignore synthesizing the + * metadata. + */ free(info_node); + goto out; } + /* info_linear is now owned by info_node and shouldn't be freed below. */ info_linear = NULL;
/* @@ -459,18 +465,18 @@ int perf_event__synthesize_bpf_events(struct perf_session *session, return err; }
-static void perf_env__add_bpf_info(struct perf_env *env, u32 id) +static int perf_env__add_bpf_info(struct perf_env *env, u32 id) { struct bpf_prog_info_linear *info_linear; struct bpf_prog_info_node *info_node; struct btf *btf = NULL; u64 arrays; u32 btf_id; - int fd; + int fd, err = 0;
fd = bpf_prog_get_fd_by_id(id); if (fd < 0) - return; + return -EINVAL;
arrays = 1UL << BPF_PROG_INFO_JITED_KSYMS; arrays |= 1UL << BPF_PROG_INFO_JITED_FUNC_LENS; @@ -483,6 +489,7 @@ static void perf_env__add_bpf_info(struct perf_env *env, u32 id) info_linear = bpf_program__get_prog_info_linear(fd, arrays); if (IS_ERR_OR_NULL(info_linear)) { pr_debug("%s: failed to get BPF program info. aborting\n", __func__); + err = PTR_ERR(info_linear); goto out; }
@@ -492,38 +499,46 @@ static void perf_env__add_bpf_info(struct perf_env *env, u32 id) if (info_node) { info_node->info_linear = info_linear; if (!perf_env__insert_bpf_prog_info(env, info_node)) { + pr_debug("%s: duplicate add bpf info request for id %u\n", + __func__, btf_id); free(info_linear); free(info_node); + goto out; } - } else + } else { free(info_linear); + err = -ENOMEM; + goto out; + }
if (btf_id == 0) goto out;
btf = btf__load_from_kernel_by_id(btf_id); - if (libbpf_get_error(btf)) { - pr_debug("%s: failed to get BTF of id %u, aborting\n", - __func__, btf_id); - goto out; + if (!btf) { + err = -errno; + pr_debug("%s: failed to get BTF of id %u %d\n", __func__, btf_id, err); + } else { + perf_env__fetch_btf(env, btf_id, btf); } - perf_env__fetch_btf(env, btf_id, btf);
out: btf__free(btf); close(fd); + return err; }
static int bpf_event__sb_cb(union perf_event *event, void *data) { struct perf_env *env = data; + int ret = 0;
if (event->header.type != PERF_RECORD_BPF_EVENT) return -1;
switch (event->bpf.type) { case PERF_BPF_EVENT_PROG_LOAD: - perf_env__add_bpf_info(env, event->bpf.id); + ret = perf_env__add_bpf_info(env, event->bpf.id);
case PERF_BPF_EVENT_PROG_UNLOAD: /* @@ -537,7 +552,7 @@ static int bpf_event__sb_cb(union perf_event *event, void *data) break; }
- return 0; + return ret; }
int evlist__add_bpf_sb_event(struct evlist *evlist, struct perf_env *env)
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Taniya Das quic_tdas@quicinc.com
[ Upstream commit 25708f73ff171bb4171950c9f4be5aa8504b8459 ]
Enable the retain_ff_enable bit of GDSCR only if the GDSC is already ON. Once the GDSCR moves to HW control, SW no longer can determine the state of the GDSCR and setting the retain_ff bit could destroy all the register contents we intended to save. Therefore, move the retain_ff configuration before switching the GDSC to HW trigger mode.
Cc: stable@vger.kernel.org Fixes: 173722995cdb ("clk: qcom: gdsc: Add support to enable retention of GSDCR") Signed-off-by: Taniya Das quic_tdas@quicinc.com Reviewed-by: Imran Shaik quic_imrashai@quicinc.com Tested-by: Imran Shaik quic_imrashai@quicinc.com # on QCS8300 Link: https://lore.kernel.org/r/20250214-gdsc_fixes-v1-1-73e56d68a80f@quicinc.com Signed-off-by: Bjorn Andersson andersson@kernel.org [ Changed error path ] Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/clk/qcom/gdsc.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)
--- a/drivers/clk/qcom/gdsc.c +++ b/drivers/clk/qcom/gdsc.c @@ -273,6 +273,9 @@ static int gdsc_enable(struct generic_pm */ udelay(1);
+ if (sc->flags & RETAIN_FF_ENABLE) + gdsc_retain_ff_on(sc); + /* Turn on HW trigger mode if supported */ if (sc->flags & HW_CTRL) { ret = gdsc_hwctrl(sc, true); @@ -289,9 +292,6 @@ static int gdsc_enable(struct generic_pm udelay(1); }
- if (sc->flags & RETAIN_FF_ENABLE) - gdsc_retain_ff_on(sc); - return 0; }
@@ -392,13 +392,6 @@ static int gdsc_init(struct gdsc *sc) return ret; }
- /* Turn on HW trigger mode if supported */ - if (sc->flags & HW_CTRL) { - ret = gdsc_hwctrl(sc, true); - if (ret < 0) - return ret; - } - /* * Make sure the retain bit is set if the GDSC is already on, * otherwise we end up turning off the GDSC and destroying all @@ -406,6 +399,14 @@ static int gdsc_init(struct gdsc *sc) */ if (sc->flags & RETAIN_FF_ENABLE) gdsc_retain_ff_on(sc); + + /* Turn on HW trigger mode if supported */ + if (sc->flags & HW_CTRL) { + ret = gdsc_hwctrl(sc, true); + if (ret < 0) + return ret; + } + } else if (sc->flags & ALWAYS_ON) { /* If ALWAYS_ON GDSCs are not ON, turn them ON */ gdsc_enable(&sc->pd);
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aaron Kling webgeek1234@gmail.com
[ Upstream commit e979a7c79fbc706f6dac913af379ef4caa04d3d5 ]
A delay unit of 0 is a valid entry, thus it is not valid to check for unused delays. Instead, check the value field; if that is zero, the given delay is unset.
Fixes: 4426e6b4ecf6 ("spi: tegra114: Don't fail set_cs_timing when delays are zero") Cc: stable@vger.kernel.org Signed-off-by: Aaron Kling webgeek1234@gmail.com Reviewed-by: Jon Hunter jonathanh@nvidia.com Link: https://patch.msgid.link/20250506-spi-tegra114-fixup-v1-1-136dc2f732f3@gmail... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-tegra114.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index af9ed52445fe6..30a699ba9b4c2 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -729,9 +729,9 @@ static int tegra_spi_set_hw_cs_timing(struct spi_device *spi) u32 inactive_cycles; u8 cs_state;
- if ((setup->unit && setup->unit != SPI_DELAY_UNIT_SCK) || - (hold->unit && hold->unit != SPI_DELAY_UNIT_SCK) || - (inactive->unit && inactive->unit != SPI_DELAY_UNIT_SCK)) { + if ((setup->value && setup->unit != SPI_DELAY_UNIT_SCK) || + (hold->value && hold->unit != SPI_DELAY_UNIT_SCK) || + (inactive->value && inactive->unit != SPI_DELAY_UNIT_SCK)) { dev_err(&spi->dev, "Invalid delay unit %d, should be SPI_DELAY_UNIT_SCK\n", SPI_DELAY_UNIT_SCK);
5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qiu-ji Chen chenqiuji666@gmail.com
[ Upstream commit 8eba2187391e5ab49940cd02d6bd45a5617f4daf ]
Fixed a flag reuse bug in the mtk_cqdma_tx_status() function.
Fixes: 157ae5ffd76a ("dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()") Cc: stable@vger.kernel.org Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202505270641.MStzJUfU-lkp@intel.com/ Signed-off-by: Qiu-ji Chen chenqiuji666@gmail.com Reviewed-by: Eugen Hristev eugen.hristev@linaro.org Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Link: https://lore.kernel.org/r/20250606090017.5436-1-chenqiuji666@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/mediatek/mtk-cqdma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/mediatek/mtk-cqdma.c b/drivers/dma/mediatek/mtk-cqdma.c index 39e902b279e64..60d1d56b98317 100644 --- a/drivers/dma/mediatek/mtk-cqdma.c +++ b/drivers/dma/mediatek/mtk-cqdma.c @@ -450,9 +450,9 @@ static enum dma_status mtk_cqdma_tx_status(struct dma_chan *c, return ret;
spin_lock_irqsave(&cvc->pc->lock, flags); - spin_lock_irqsave(&cvc->vc.lock, flags); + spin_lock(&cvc->vc.lock); vd = mtk_cqdma_find_active_desc(c, cookie); - spin_unlock_irqrestore(&cvc->vc.lock, flags); + spin_unlock(&cvc->vc.lock); spin_unlock_irqrestore(&cvc->pc->lock, flags);
if (vd) {
On 9/7/2025 12:57 PM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.15.192 release. There are 64 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 09 Sep 2025 19:55:53 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.192-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y and the diffstat can be found below.
thanks,
greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:
Tested-by: Florian Fainelli florian.fainelli@broadcom.com
# Librecast Test Results
010/010 [ OK ] libmld 120/120 [ OK ] liblibrecast
CPU/kernel: Linux auntie 5.15.192-rc1-00099-gccdfe77d4229 #77 SMP Mon Sep 8 08:57:49 -00 2025 x86_64 AMD Ryzen 9 9950X 16-Core Processor AuthenticAMD GNU/Linux
Tested-by: Brett A C Sheffield bacs@librecast.net
On Sun, 07 Sep 2025 21:57:42 +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.15.192 release. There are 64 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 09 Sep 2025 19:55:53 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.192-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y and the diffstat can be found below.
thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v5.15: 10 builds: 10 pass, 0 fail 28 boots: 28 pass, 0 fail 105 tests: 105 pass, 0 fail
Linux version: 5.15.192-rc1-gccdfe77d4229 Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra186-p3509-0000+p3636-0001, tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Jon Hunter jonathanh@nvidia.com
Jon
On Mon, 8 Sept 2025 at 01:43, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.15.192 release. There are 64 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 09 Sep 2025 19:55:53 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.192-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y and the diffstat can be found below.
thanks,
greg k-h
While building Linux stable-rc 5.15.192-rc1 the arm64 allyesconfig builds failed.
* arm64, build - gcc-12-allyesconfig
Regression Analysis: - New regression? yes - Reproducibility? yes
Build regression: stable-rc 5.15.192-rc1 arm64 allyesconfig qede_main.c:199:35: error: initialization of void from incompatible pointer
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
### build log drivers/net/ethernet/qlogic/qede/qede_main.c:199:35: error: initialization of 'void (*)(void *, u16, u16)' {aka 'void (*)(void *, short unsigned int, short unsigned int)'} from incompatible pointer type 'void (*)(void *, void *, u8)' {aka 'void (*)(void *, void *, unsigned char)'} [-Werror=incompatible-pointer-types] 199 | .arfs_filter_op = qede_arfs_filter_op, | ^~~~~~~~~~~~~~~~~~~
This was reported on the Linux next-20250428 tag, https://lore.kernel.org/all/CA+G9fYs+7-Jut2PM1Z8fXOkBaBuGt0WwTUvU=4cu2O8iQdw...
## Build * kernel: 5.15.192-rc1 * git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git * git commit: ccdfe77d4229628515f4f822400fe6414b9861f8 * git describe: v5.15.190-99-gccdfe77d4229 * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15....
## Test Regressions (compared to v5.15.190-34-g29918c0c5b35) * arm64, build - gcc-12-allyesconfig
Build log: https://qa-reports.linaro.org/api/testruns/29791503/log_file/ Build details: https://regressions.linaro.org/lkft/linux-stable-rc-linux-5.15.y/v5.15.190-9... Build link: https://storage.tuxsuite.com/public/linaro/lkft/builds/32O3I8jsbRRLOu0azhrfB... Build config: https://storage.tuxsuite.com/public/linaro/lkft/builds/32O3I8jsbRRLOu0azhrfB...
-- Linaro LKFT https://lkft.linaro.org
On Mon, Sep 08, 2025 at 11:54:56PM +0530, Naresh Kamboju wrote:
On Mon, 8 Sept 2025 at 01:43, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.15.192 release. There are 64 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 09 Sep 2025 19:55:53 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.192-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y and the diffstat can be found below.
thanks,
greg k-h
While building Linux stable-rc 5.15.192-rc1 the arm64 allyesconfig builds failed.
- arm64, build
- gcc-12-allyesconfig
Regression Analysis:
- New regression? yes
- Reproducibility? yes
Build regression: stable-rc 5.15.192-rc1 arm64 allyesconfig qede_main.c:199:35: error: initialization of void from incompatible pointer
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
### build log drivers/net/ethernet/qlogic/qede/qede_main.c:199:35: error: initialization of 'void (*)(void *, u16, u16)' {aka 'void (*)(void *, short unsigned int, short unsigned int)'} from incompatible pointer type 'void (*)(void *, void *, u8)' {aka 'void (*)(void *, void *, unsigned char)'} [-Werror=incompatible-pointer-types] 199 | .arfs_filter_op = qede_arfs_filter_op, | ^~~~~~~~~~~~~~~~~~~
This was reported on the Linux next-20250428 tag, https://lore.kernel.org/all/CA+G9fYs+7-Jut2PM1Z8fXOkBaBuGt0WwTUvU=4cu2O8iQdw...
Odd, I can't reproduce this here, and nothing has changed in this driver at all for this -rc cycle. I see no one responded to the linux-next issue either, so any hints?
Also, the definition seems wrong from what you built, here it is with the -rc patch applied:
$ git grep arfs_filter_op drivers/net/ethernet/qlogic/qed/qed_l2.c: op->arfs_filter_op(dev, cookie, fw_return_code); drivers/net/ethernet/qlogic/qede/qede.h:void qede_arfs_filter_op(void *dev, void *filter, u8 fw_rc); drivers/net/ethernet/qlogic/qede/qede_filter.c:void qede_arfs_filter_op(void *dev, void *filter, u8 fw_rc) drivers/net/ethernet/qlogic/qede/qede_main.c: .arfs_filter_op = qede_arfs_filter_op, include/linux/qed/qed_if.h: void (*arfs_filter_op)(void *dev, void *fltr, u8 fw_rc);
No u16 stuff at all here.
thanks,
greg k-h
On Tue, 9 Sept 2025 at 15:59, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
On Mon, Sep 08, 2025 at 11:54:56PM +0530, Naresh Kamboju wrote:
On Mon, 8 Sept 2025 at 01:43, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.15.192 release. There are 64 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 09 Sep 2025 19:55:53 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.192-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y and the diffstat can be found below.
thanks,
greg k-h
While building Linux stable-rc 5.15.192-rc1 the arm64 allyesconfig builds failed.
- arm64, build
- gcc-12-allyesconfig
Regression Analysis:
- New regression? yes
- Reproducibility? yes
Build regression: stable-rc 5.15.192-rc1 arm64 allyesconfig qede_main.c:199:35: error: initialization of void from incompatible pointer
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
### build log drivers/net/ethernet/qlogic/qede/qede_main.c:199:35: error: initialization of 'void (*)(void *, u16, u16)' {aka 'void (*)(void *, short unsigned int, short unsigned int)'} from incompatible pointer type 'void (*)(void *, void *, u8)' {aka 'void (*)(void *, void *, unsigned char)'} [-Werror=incompatible-pointer-types] 199 | .arfs_filter_op = qede_arfs_filter_op, | ^~~~~~~~~~~~~~~~~~~
This was reported on the Linux next-20250428 tag, https://lore.kernel.org/all/CA+G9fYs+7-Jut2PM1Z8fXOkBaBuGt0WwTUvU=4cu2O8iQdw...
Odd, I can't reproduce this here, and nothing has changed in this driver at all for this -rc cycle. I see no one responded to the linux-next issue either, so any hints?
Please ignore this allyesconfig build failure for now on 5.15 and 5.10. Seems like it is my local builder issue.
- Naresh
On Tue, Sep 09, 2025 at 07:48:18PM +0530, Naresh Kamboju wrote:
On Tue, 9 Sept 2025 at 15:59, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
On Mon, Sep 08, 2025 at 11:54:56PM +0530, Naresh Kamboju wrote:
On Mon, 8 Sept 2025 at 01:43, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.15.192 release. There are 64 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 09 Sep 2025 19:55:53 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.192-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y and the diffstat can be found below.
thanks,
greg k-h
While building Linux stable-rc 5.15.192-rc1 the arm64 allyesconfig builds failed.
- arm64, build
- gcc-12-allyesconfig
Regression Analysis:
- New regression? yes
- Reproducibility? yes
Build regression: stable-rc 5.15.192-rc1 arm64 allyesconfig qede_main.c:199:35: error: initialization of void from incompatible pointer
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
### build log drivers/net/ethernet/qlogic/qede/qede_main.c:199:35: error: initialization of 'void (*)(void *, u16, u16)' {aka 'void (*)(void *, short unsigned int, short unsigned int)'} from incompatible pointer type 'void (*)(void *, void *, u8)' {aka 'void (*)(void *, void *, unsigned char)'} [-Werror=incompatible-pointer-types] 199 | .arfs_filter_op = qede_arfs_filter_op, | ^~~~~~~~~~~~~~~~~~~
This was reported on the Linux next-20250428 tag, https://lore.kernel.org/all/CA+G9fYs+7-Jut2PM1Z8fXOkBaBuGt0WwTUvU=4cu2O8iQdw...
Odd, I can't reproduce this here, and nothing has changed in this driver at all for this -rc cycle. I see no one responded to the linux-next issue either, so any hints?
Please ignore this allyesconfig build failure for now on 5.15 and 5.10. Seems like it is my local builder issue.
Great, thanks for letting me know,
greg k-h
On 9/7/25 13:57, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.15.192 release. There are 64 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 09 Sep 2025 19:55:53 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.192-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan skhan@linuxfoundation.org
thanks, -- Shuah
On 9/7/25 12:57, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.15.192 release. There are 64 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 09 Sep 2025 19:55:53 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.192-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y and the diffstat can be found below.
thanks,
greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos re@w6rz.net
On 08/09/25 1:27 am, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.15.192 release. There are 64 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 09 Sep 2025 19:55:53 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/ patch-5.15.192-rc1.gz or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y and the diffstat can be found below.
No issues were seen on x86_64 and aarch64 platforms with our testing.
Tested-by: Vijayendra Suman vijayendra.suman@oracle.com> >
thanks,
greg k-h
The kernel, bpf tool, perf tool, and kselftest builds fine for v5.15.192-rc1 on x86 and arm64 Azure VM.
Tested-by: Hardik Garg hargar@linux.microsoft.com
Thanks, Hardik
linux-stable-mirror@lists.linaro.org