Sandisk SN530 NVMe drives have broken MSIs. On systems without MSI-X support, all commands time out resulting in the following message:

nvme nvme0: I/O tag 12 (100c) QID 0 timeout, completion polled

These timeouts cause the boot to take an excessively-long time (over 20 minutes) while the initial command queue is flushed.

Address this by adding a quirk for drives with buggy MSIs. The lspci output for this device (recorded on a system with MSI-X support) is:

02:00.0 Non-Volatile memory controller: Sandisk Corp Device 5008 (rev 01) (prog-if 02 [NVM Express]) Subsystem: Sandisk Corp Device 5008 Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0 Memory at f7e00000 (64-bit, non-prefetchable) [size=16K] Memory at f7e04000 (64-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [b0] MSI-X: Enable+ Count=17 Masked- Capabilities: [c0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [1b8] Latency Tolerance Reporting Capabilities: [300] Secondary PCI Express Capabilities: [900] L1 PM Substates Kernel driver in use: nvme Kernel modules: nvme

Cc: stable@vger.kernel.org Signed-off-by: Sean Anderson sean.anderson@linux.dev ---

drivers/nvme/host/nvme.h | 5 +++++ drivers/nvme/host/pci.c | 14 +++++++++++--- 2 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 7b87763e2f8a..738719085e05 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -162,6 +162,11 @@ enum nvme_quirks { * Disables simple suspend/resume path. */ NVME_QUIRK_FORCE_NO_SIMPLE_SUSPEND = (1 << 20), + + /* + * MSI (but not MSI-X) interrupts are broken and never fire. + */ + NVME_QUIRK_BROKEN_MSI = (1 << 21), };

/* diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index e6267a6aa380..d1f0fa2e7c96 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2218,6 +2218,7 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues) .priv = dev, }; unsigned int irq_queues, poll_queues; + unsigned int flags = PCI_IRQ_ALL_TYPES | PCI_IRQ_AFFINITY;

/* * Poll queues don't need interrupts, but we need at least one I/O queue @@ -2241,8 +2242,10 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues) irq_queues = 1; if (!(dev->ctrl.quirks & NVME_QUIRK_SINGLE_VECTOR)) irq_queues += (nr_io_queues - poll_queues); - return pci_alloc_irq_vectors_affinity(pdev, 1, irq_queues, - PCI_IRQ_ALL_TYPES | PCI_IRQ_AFFINITY, &affd); + if (dev->ctrl.quirks & NVME_QUIRK_BROKEN_MSI) + flags &= ~PCI_IRQ_MSI; + return pci_alloc_irq_vectors_affinity(pdev, 1, irq_queues, flags, + &affd); }

static unsigned int nvme_max_io_queues(struct nvme_dev *dev) @@ -2471,6 +2474,7 @@ static int nvme_pci_enable(struct nvme_dev *dev) { int result = -ENOMEM; struct pci_dev *pdev = to_pci_dev(dev->dev); + unsigned int flags = PCI_IRQ_ALL_TYPES;

if (pci_enable_device_mem(pdev)) return result; @@ -2487,7 +2491,9 @@ static int nvme_pci_enable(struct nvme_dev *dev) * interrupts. Pre-enable a single MSIX or MSI vec for setup. We'll * adjust this later. */ - result = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); + if (dev->ctrl.quirks & NVME_QUIRK_BROKEN_MSI) + flags &= ~PCI_IRQ_MSI; + result = pci_alloc_irq_vectors(pdev, 1, 1, flags); if (result < 0) goto disable;

@@ -3381,6 +3387,8 @@ static const struct pci_device_id nvme_id_table[] = { .driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY | NVME_QUIRK_DISABLE_WRITE_ZEROES| NVME_QUIRK_IGNORE_DEV_SUBNQN, }, + { PCI_DEVICE(0x15b7, 0x5008), /* Sandisk SN530 */ + .driver_data = NVME_QUIRK_BROKEN_MSI }, { PCI_DEVICE(0x1987, 0x5012), /* Phison E12 */ .driver_data = NVME_QUIRK_BOGUS_NID, }, { PCI_DEVICE(0x1987, 0x5016), /* Phison E16 */