From: Anthony Krowiak akrowiak@linux.ibm.com

[ Upstream commit d33d729afcc8ad2148d99f9bc499b33fd0c0d73b ]

An erroneous message is written to the kernel log when either of the following actions are taken by a user:

1. Assign an adapter or domain to a vfio_ap mediated device via its sysfs assign_adapter or assign_domain attributes that would result in one or more AP queues being assigned that are already assigned to a different mediated device. Sharing of queues between mdevs is not allowed.

2. Reserve an adapter or domain for the host device driver via the AP bus driver's sysfs apmask or aqmask attribute that would result in providing host access to an AP queue that is in use by a vfio_ap mediated device. Reserving a queue for a host driver that is in use by an mdev is not allowed.

In both cases, the assignment will return an error; however, a message like the following is written to the kernel log:

vfio_ap_mdev e1839397-51a0-4e3c-91e0-c3b9c3d3047d: Userspace may not re-assign queue 00.0028 already assigned to \ e1839397-51a0-4e3c-91e0-c3b9c3d3047d

Notice the mdev reporting the error is the same as the mdev identified in the message as the one to which the queue is being assigned. It is perfectly okay to assign a queue to an mdev to which it is already assigned; the assignment is simply ignored by the vfio_ap device driver.

This patch logs more descriptive and accurate messages for both 1 and 2 above to the kernel log:

Example for 1: vfio_ap_mdev 0fe903a0-a323-44db-9daf-134c68627d61: Userspace may not assign queue 00.0033 to mdev: already assigned to \ 62177883-f1bb-47f0-914d-32a22e3a8804

Example for 2: vfio_ap_mdev 62177883-f1bb-47f0-914d-32a22e3a8804: Can not reserve queue 00.0033 for host driver: in use by mdev

Signed-off-by: Anthony Krowiak akrowiak@linux.ibm.com Link: https://lore.kernel.org/r/20250311103304.1539188-1-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/crypto/vfio_ap_ops.c | 72 ++++++++++++++++++++----------- 1 file changed, 46 insertions(+), 26 deletions(-)

diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c index 9f76f2d7b66e5..3bac163057d89 100644 --- a/drivers/s390/crypto/vfio_ap_ops.c +++ b/drivers/s390/crypto/vfio_ap_ops.c @@ -851,48 +851,66 @@ static void vfio_ap_mdev_remove(struct mdev_device *mdev) vfio_put_device(&matrix_mdev->vdev); }

-#define MDEV_SHARING_ERR "Userspace may not re-assign queue %02lx.%04lx " \ - "already assigned to %s" +#define MDEV_SHARING_ERR "Userspace may not assign queue %02lx.%04lx to mdev: already assigned to %s"

-static void vfio_ap_mdev_log_sharing_err(struct ap_matrix_mdev *matrix_mdev, - unsigned long *apm, - unsigned long *aqm) +#define MDEV_IN_USE_ERR "Can not reserve queue %02lx.%04lx for host driver: in use by mdev" + +static void vfio_ap_mdev_log_sharing_err(struct ap_matrix_mdev *assignee, + struct ap_matrix_mdev *assigned_to, + unsigned long *apm, unsigned long *aqm) { unsigned long apid, apqi; - const struct device *dev = mdev_dev(matrix_mdev->mdev); - const char *mdev_name = dev_name(dev);

- for_each_set_bit_inv(apid, apm, AP_DEVICES) + for_each_set_bit_inv(apid, apm, AP_DEVICES) { + for_each_set_bit_inv(apqi, aqm, AP_DOMAINS) { + dev_warn(mdev_dev(assignee->mdev), MDEV_SHARING_ERR, + apid, apqi, dev_name(mdev_dev(assigned_to->mdev))); + } + } +} + +static void vfio_ap_mdev_log_in_use_err(struct ap_matrix_mdev *assignee, + unsigned long *apm, unsigned long *aqm) +{ + unsigned long apid, apqi; + + for_each_set_bit_inv(apid, apm, AP_DEVICES) { for_each_set_bit_inv(apqi, aqm, AP_DOMAINS) - dev_warn(dev, MDEV_SHARING_ERR, apid, apqi, mdev_name); + dev_warn(mdev_dev(assignee->mdev), MDEV_IN_USE_ERR, apid, apqi); + } }

/** * vfio_ap_mdev_verify_no_sharing - verify APQNs are not shared by matrix mdevs * + * @assignee: the matrix mdev to which @mdev_apm and @mdev_aqm are being + * assigned; or, NULL if this function was called by the AP bus + * driver in_use callback to verify none of the APQNs being reserved + * for the host device driver are in use by a vfio_ap mediated device * @mdev_apm: mask indicating the APIDs of the APQNs to be verified * @mdev_aqm: mask indicating the APQIs of the APQNs to be verified * - * Verifies that each APQN derived from the Cartesian product of a bitmap of - * AP adapter IDs and AP queue indexes is not configured for any matrix - * mediated device. AP queue sharing is not allowed. + * Verifies that each APQN derived from the Cartesian product of APIDs + * represented by the bits set in @mdev_apm and the APQIs of the bits set in + * @mdev_aqm is not assigned to a mediated device other than the mdev to which + * the APQN is being assigned (@assignee). AP queue sharing is not allowed. * * Return: 0 if the APQNs are not shared; otherwise return -EADDRINUSE. */ -static int vfio_ap_mdev_verify_no_sharing(unsigned long *mdev_apm, +static int vfio_ap_mdev_verify_no_sharing(struct ap_matrix_mdev *assignee, + unsigned long *mdev_apm, unsigned long *mdev_aqm) { - struct ap_matrix_mdev *matrix_mdev; + struct ap_matrix_mdev *assigned_to; DECLARE_BITMAP(apm, AP_DEVICES); DECLARE_BITMAP(aqm, AP_DOMAINS);

- list_for_each_entry(matrix_mdev, &matrix_dev->mdev_list, node) { + list_for_each_entry(assigned_to, &matrix_dev->mdev_list, node) { /* - * If the input apm and aqm are fields of the matrix_mdev - * object, then move on to the next matrix_mdev. + * If the mdev to which the mdev_apm and mdev_aqm is being + * assigned is the same as the mdev being verified */ - if (mdev_apm == matrix_mdev->matrix.apm && - mdev_aqm == matrix_mdev->matrix.aqm) + if (assignee == assigned_to) continue;

memset(apm, 0, sizeof(apm)); @@ -902,15 +920,16 @@ static int vfio_ap_mdev_verify_no_sharing(unsigned long *mdev_apm, * We work on full longs, as we can only exclude the leftover * bits in non-inverse order. The leftover is all zeros. */ - if (!bitmap_and(apm, mdev_apm, matrix_mdev->matrix.apm, - AP_DEVICES)) + if (!bitmap_and(apm, mdev_apm, assigned_to->matrix.apm, AP_DEVICES)) continue;

- if (!bitmap_and(aqm, mdev_aqm, matrix_mdev->matrix.aqm, - AP_DOMAINS)) + if (!bitmap_and(aqm, mdev_aqm, assigned_to->matrix.aqm, AP_DOMAINS)) continue;

- vfio_ap_mdev_log_sharing_err(matrix_mdev, apm, aqm); + if (assignee) + vfio_ap_mdev_log_sharing_err(assignee, assigned_to, apm, aqm); + else + vfio_ap_mdev_log_in_use_err(assigned_to, apm, aqm);

return -EADDRINUSE; } @@ -939,7 +958,8 @@ static int vfio_ap_mdev_validate_masks(struct ap_matrix_mdev *matrix_mdev) matrix_mdev->matrix.aqm)) return -EADDRNOTAVAIL;

- return vfio_ap_mdev_verify_no_sharing(matrix_mdev->matrix.apm, + return vfio_ap_mdev_verify_no_sharing(matrix_mdev, + matrix_mdev->matrix.apm, matrix_mdev->matrix.aqm); }

@@ -2467,7 +2487,7 @@ int vfio_ap_mdev_resource_in_use(unsigned long *apm, unsigned long *aqm)

mutex_lock(&matrix_dev->guests_lock); mutex_lock(&matrix_dev->mdevs_lock); - ret = vfio_ap_mdev_verify_no_sharing(apm, aqm); + ret = vfio_ap_mdev_verify_no_sharing(NULL, apm, aqm); mutex_unlock(&matrix_dev->mdevs_lock); mutex_unlock(&matrix_dev->guests_lock);

From: Pali Rohár pali@kernel.org

[ Upstream commit 4236ac9fe5b8b42756070d4abfb76fed718e87c2 ]

Old SMB1 servers without CAP_NT_SMBS do not support CIFS_open() function and instead SMBLegacyOpen() needs to be used. This logic is already handled in cifs_open_file() function, which is server->ops->open callback function.

So for querying and creating MF symlinks use open callback function instead of CIFS_open() function directly.

This change fixes querying and creating new MF symlinks on Windows 98. Currently cifs_query_mf_symlink() is not able to detect MF symlink and cifs_create_mf_symlink() is failing with EIO error.

Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/link.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/smb/client/link.c b/fs/smb/client/link.c index 47ddeb7fa1116..aa45ef6ae99a6 100644 --- a/fs/smb/client/link.c +++ b/fs/smb/client/link.c @@ -257,7 +257,7 @@ cifs_query_mf_symlink(unsigned int xid, struct cifs_tcon *tcon, struct cifs_open_parms oparms; struct cifs_io_parms io_parms = {0}; int buf_type = CIFS_NO_BUFFER; - FILE_ALL_INFO file_info; + struct cifs_open_info_data query_data;

oparms = (struct cifs_open_parms) { .tcon = tcon, @@ -269,11 +269,11 @@ cifs_query_mf_symlink(unsigned int xid, struct cifs_tcon *tcon, .fid = &fid, };

- rc = CIFS_open(xid, &oparms, &oplock, &file_info); + rc = tcon->ses->server->ops->open(xid, &oparms, &oplock, &query_data); if (rc) return rc;

- if (file_info.EndOfFile != cpu_to_le64(CIFS_MF_SYMLINK_FILE_SIZE)) { + if (query_data.fi.EndOfFile != cpu_to_le64(CIFS_MF_SYMLINK_FILE_SIZE)) { rc = -ENOENT; /* it's not a symlink */ goto out; @@ -312,7 +312,7 @@ cifs_create_mf_symlink(unsigned int xid, struct cifs_tcon *tcon, .fid = &fid, };

- rc = CIFS_open(xid, &oparms, &oplock, NULL); + rc = tcon->ses->server->ops->open(xid, &oparms, &oplock, NULL); if (rc) return rc;

From: Wang Zhaolong wangzhaolong1@huawei.com

[ Upstream commit 287906b20035a04a234d1a3c64f760a5678387be ]

During mount option processing and negotiation with the server, the original user-specified rsize/wsize values were being modified directly. This makes it impossible to recover these values after a connection reset, leading to potential degraded performance after reconnection.

The other problem is that When negotiating read and write sizes, there are cases where the negotiated values might calculate to zero, especially during reconnection when server->max_read or server->max_write might be reset. In general, these values come from the negotiation response. According to MS-SMB2 specification, these values should be at least 65536 bytes.

This patch improves IO parameter handling:

1. Adds vol_rsize and vol_wsize fields to store the original user-specified values separately from the negotiated values 2. Uses got_rsize/got_wsize flags to determine if values were user-specified rather than checking for non-zero values, which is more reliable 3. Adds a prevent_zero_iosize() helper function to ensure IO sizes are never negotiated down to zero, which could happen in edge cases like when server->max_read/write is zero

The changes make the CIFS client more resilient to unusual server responses and reconnection scenarios, preventing potential failures when IO sizes are calculated to be zero.

Signed-off-by: Wang Zhaolong wangzhaolong1@huawei.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/fs_context.c | 2 ++ fs/smb/client/fs_context.h | 3 +++ fs/smb/client/smb1ops.c | 6 +++--- fs/smb/client/smb2ops.c | 27 +++++++++++++++++++-------- fs/smb/common/smb2pdu.h | 3 +++ 5 files changed, 30 insertions(+), 11 deletions(-)

diff --git a/fs/smb/client/fs_context.c b/fs/smb/client/fs_context.c index 1f1f4586673a7..66d872d63f839 100644 --- a/fs/smb/client/fs_context.c +++ b/fs/smb/client/fs_context.c @@ -1237,6 +1237,7 @@ static int smb3_fs_context_parse_param(struct fs_context *fc, case Opt_rsize: ctx->rsize = result.uint_32; ctx->got_rsize = true; + ctx->vol_rsize = ctx->rsize; break; case Opt_wsize: ctx->wsize = result.uint_32; @@ -1252,6 +1253,7 @@ static int smb3_fs_context_parse_param(struct fs_context *fc, ctx->wsize, PAGE_SIZE); } } + ctx->vol_wsize = ctx->wsize; break; case Opt_acregmax: if (result.uint_32 > CIFS_MAX_ACTIMEO / HZ) { diff --git a/fs/smb/client/fs_context.h b/fs/smb/client/fs_context.h index c8c8b4451b3bc..90ebff5d0199d 100644 --- a/fs/smb/client/fs_context.h +++ b/fs/smb/client/fs_context.h @@ -253,6 +253,9 @@ struct smb3_fs_context { bool use_client_guid:1; /* reuse existing guid for multichannel */ u8 client_guid[SMB2_CLIENT_GUID_SIZE]; + /* User-specified original r/wsize value */ + unsigned int vol_rsize; + unsigned int vol_wsize; unsigned int bsize; unsigned int rasize; unsigned int rsize; diff --git a/fs/smb/client/smb1ops.c b/fs/smb/client/smb1ops.c index a2dbebd13720b..71fe5aa52630d 100644 --- a/fs/smb/client/smb1ops.c +++ b/fs/smb/client/smb1ops.c @@ -437,8 +437,8 @@ cifs_negotiate_wsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) unsigned int wsize;

/* start with specified wsize, or default */ - if (ctx->wsize) - wsize = ctx->wsize; + if (ctx->got_wsize) + wsize = ctx->vol_wsize; else if (tcon->unix_ext && (unix_cap & CIFS_UNIX_LARGE_WRITE_CAP)) wsize = CIFS_DEFAULT_IOSIZE; else @@ -490,7 +490,7 @@ cifs_negotiate_rsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) else defsize = server->maxBuf - sizeof(READ_RSP);

- rsize = ctx->rsize ? ctx->rsize : defsize; + rsize = ctx->got_rsize ? ctx->vol_rsize : defsize;

/* * no CAP_LARGE_READ_X? Then MS-CIFS states that we must limit this to diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index ff50cdfde5fe4..74bcc51ccd32f 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -467,6 +467,17 @@ smb2_negotiate(const unsigned int xid, return rc; }

+static inline unsigned int +prevent_zero_iosize(unsigned int size, const char *type) +{ + if (size == 0) { + cifs_dbg(VFS, "SMB: Zero %ssize calculated, using minimum value %u\n", + type, CIFS_MIN_DEFAULT_IOSIZE); + return CIFS_MIN_DEFAULT_IOSIZE; + } + return size; +} + static unsigned int smb2_negotiate_wsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) { @@ -474,12 +485,12 @@ smb2_negotiate_wsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) unsigned int wsize;

/* start with specified wsize, or default */ - wsize = ctx->wsize ? ctx->wsize : CIFS_DEFAULT_IOSIZE; + wsize = ctx->got_wsize ? ctx->vol_wsize : CIFS_DEFAULT_IOSIZE; wsize = min_t(unsigned int, wsize, server->max_write); if (!(server->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU)) wsize = min_t(unsigned int, wsize, SMB2_MAX_BUFFER_SIZE);

- return wsize; + return prevent_zero_iosize(wsize, "w"); }

static unsigned int @@ -489,7 +500,7 @@ smb3_negotiate_wsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) unsigned int wsize;

/* start with specified wsize, or default */ - wsize = ctx->wsize ? ctx->wsize : SMB3_DEFAULT_IOSIZE; + wsize = ctx->got_wsize ? ctx->vol_wsize : SMB3_DEFAULT_IOSIZE; wsize = min_t(unsigned int, wsize, server->max_write); #ifdef CONFIG_CIFS_SMB_DIRECT if (server->rdma) { @@ -511,7 +522,7 @@ smb3_negotiate_wsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) if (!(server->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU)) wsize = min_t(unsigned int, wsize, SMB2_MAX_BUFFER_SIZE);

- return wsize; + return prevent_zero_iosize(wsize, "w"); }

static unsigned int @@ -521,13 +532,13 @@ smb2_negotiate_rsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) unsigned int rsize;

/* start with specified rsize, or default */ - rsize = ctx->rsize ? ctx->rsize : CIFS_DEFAULT_IOSIZE; + rsize = ctx->got_rsize ? ctx->vol_rsize : CIFS_DEFAULT_IOSIZE; rsize = min_t(unsigned int, rsize, server->max_read);

if (!(server->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU)) rsize = min_t(unsigned int, rsize, SMB2_MAX_BUFFER_SIZE);

- return rsize; + return prevent_zero_iosize(rsize, "r"); }

static unsigned int @@ -537,7 +548,7 @@ smb3_negotiate_rsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) unsigned int rsize;

/* start with specified rsize, or default */ - rsize = ctx->rsize ? ctx->rsize : SMB3_DEFAULT_IOSIZE; + rsize = ctx->got_rsize ? ctx->vol_rsize : SMB3_DEFAULT_IOSIZE; rsize = min_t(unsigned int, rsize, server->max_read); #ifdef CONFIG_CIFS_SMB_DIRECT if (server->rdma) { @@ -560,7 +571,7 @@ smb3_negotiate_rsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) if (!(server->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU)) rsize = min_t(unsigned int, rsize, SMB2_MAX_BUFFER_SIZE);

- return rsize; + return prevent_zero_iosize(rsize, "r"); }

/* diff --git a/fs/smb/common/smb2pdu.h b/fs/smb/common/smb2pdu.h index 9f272cc8f5660..0a4ca286f4169 100644 --- a/fs/smb/common/smb2pdu.h +++ b/fs/smb/common/smb2pdu.h @@ -95,6 +95,9 @@ */ #define SMB3_DEFAULT_IOSIZE (4 * 1024 * 1024)

+/* According to MS-SMB2 specification The minimum recommended value is 65536.*/ +#define CIFS_MIN_DEFAULT_IOSIZE (65536) + /* * SMB2 Header Definition *

From: Sungjong Seo sj1557.seo@samsung.com

[ Upstream commit c73e680d1f84059e1b1ea82a537f6ccc1c563eb4 ]

With commit 11a347fb6cef ("exfat: change to get file size from DataLength"), exfat_get_block() can now handle valid_size. However, most partial unwritten blocks that could be mapped with other blocks are being inefficiently processed separately as individual blocks.

Except for partial unwritten blocks that require independent processing, let's handle them simply as before.

Signed-off-by: Sungjong Seo sj1557.seo@samsung.com Reviewed-by: Yuezhang Mo Yuezhang.Mo@sony.com Signed-off-by: Namjae Jeon linkinjeon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/exfat/inode.c | 159 +++++++++++++++++++++++------------------------ 1 file changed, 77 insertions(+), 82 deletions(-)

diff --git a/fs/exfat/inode.c b/fs/exfat/inode.c index 3801516ac5071..cc4dcb7a32b57 100644 --- a/fs/exfat/inode.c +++ b/fs/exfat/inode.c @@ -274,9 +274,11 @@ static int exfat_get_block(struct inode *inode, sector_t iblock, sector_t last_block; sector_t phys = 0; sector_t valid_blks; + loff_t i_size;

mutex_lock(&sbi->s_lock); - last_block = EXFAT_B_TO_BLK_ROUND_UP(i_size_read(inode), sb); + i_size = i_size_read(inode); + last_block = EXFAT_B_TO_BLK_ROUND_UP(i_size, sb); if (iblock >= last_block && !create) goto done;

@@ -305,102 +307,95 @@ static int exfat_get_block(struct inode *inode, sector_t iblock, if (buffer_delay(bh_result)) clear_buffer_delay(bh_result);

- if (create) { + /* + * In most cases, we just need to set bh_result to mapped, unmapped + * or new status as follows: + * 1. i_size == valid_size + * 2. write case (create == 1) + * 3. direct_read (!bh_result->b_folio) + * -> the unwritten part will be zeroed in exfat_direct_IO() + * + * Otherwise, in the case of buffered read, it is necessary to take + * care the last nested block if valid_size is not equal to i_size. + */ + if (i_size == ei->valid_size || create || !bh_result->b_folio) valid_blks = EXFAT_B_TO_BLK_ROUND_UP(ei->valid_size, sb); + else + valid_blks = EXFAT_B_TO_BLK(ei->valid_size, sb);

- if (iblock + max_blocks < valid_blks) { - /* The range has been written, map it */ - goto done; - } else if (iblock < valid_blks) { - /* - * The range has been partially written, - * map the written part. - */ - max_blocks = valid_blks - iblock; - goto done; - } + /* The range has been fully written, map it */ + if (iblock + max_blocks < valid_blks) + goto done;

- /* The area has not been written, map and mark as new. */ - set_buffer_new(bh_result); + /* The range has been partially written, map the written part */ + if (iblock < valid_blks) { + max_blocks = valid_blks - iblock; + goto done; + }

+ /* The area has not been written, map and mark as new for create case */ + if (create) { + set_buffer_new(bh_result); ei->valid_size = EXFAT_BLK_TO_B(iblock + max_blocks, sb); mark_inode_dirty(inode); - } else { - valid_blks = EXFAT_B_TO_BLK(ei->valid_size, sb); + goto done; + }

- if (iblock + max_blocks < valid_blks) { - /* The range has been written, map it */ - goto done; - } else if (iblock < valid_blks) { - /* - * The area has been partially written, - * map the written part. - */ - max_blocks = valid_blks - iblock; + /* + * The area has just one block partially written. + * In that case, we should read and fill the unwritten part of + * a block with zero. + */ + if (bh_result->b_folio && iblock == valid_blks && + (ei->valid_size & (sb->s_blocksize - 1))) { + loff_t size, pos; + void *addr; + + max_blocks = 1; + + /* + * No buffer_head is allocated. + * (1) bmap: It's enough to set blocknr without I/O. + * (2) read: The unwritten part should be filled with zero. + * If a folio does not have any buffers, + * let's returns -EAGAIN to fallback to + * block_read_full_folio() for per-bh IO. + */ + if (!folio_buffers(bh_result->b_folio)) { + err = -EAGAIN; goto done; - } else if (iblock == valid_blks && - (ei->valid_size & (sb->s_blocksize - 1))) { - /* - * The block has been partially written, - * zero the unwritten part and map the block. - */ - loff_t size, pos; - void *addr; - - max_blocks = 1; - - /* - * For direct read, the unwritten part will be zeroed in - * exfat_direct_IO() - */ - if (!bh_result->b_folio) - goto done; - - /* - * No buffer_head is allocated. - * (1) bmap: It's enough to fill bh_result without I/O. - * (2) read: The unwritten part should be filled with 0 - * If a folio does not have any buffers, - * let's returns -EAGAIN to fallback to - * per-bh IO like block_read_full_folio(). - */ - if (!folio_buffers(bh_result->b_folio)) { - err = -EAGAIN; - goto done; - } + }

- pos = EXFAT_BLK_TO_B(iblock, sb); - size = ei->valid_size - pos; - addr = folio_address(bh_result->b_folio) + - offset_in_folio(bh_result->b_folio, pos); + pos = EXFAT_BLK_TO_B(iblock, sb); + size = ei->valid_size - pos; + addr = folio_address(bh_result->b_folio) + + offset_in_folio(bh_result->b_folio, pos);

- /* Check if bh->b_data points to proper addr in folio */ - if (bh_result->b_data != addr) { - exfat_fs_error_ratelimit(sb, + /* Check if bh->b_data points to proper addr in folio */ + if (bh_result->b_data != addr) { + exfat_fs_error_ratelimit(sb, "b_data(%p) != folio_addr(%p)", bh_result->b_data, addr); - err = -EINVAL; - goto done; - } - - /* Read a block */ - err = bh_read(bh_result, 0); - if (err < 0) - goto done; + err = -EINVAL; + goto done; + }

- /* Zero unwritten part of a block */ - memset(bh_result->b_data + size, 0, - bh_result->b_size - size); + /* Read a block */ + err = bh_read(bh_result, 0); + if (err < 0) + goto done;

- err = 0; - } else { - /* - * The range has not been written, clear the mapped flag - * to only zero the cache and do not read from disk. - */ - clear_buffer_mapped(bh_result); - } + /* Zero unwritten part of a block */ + memset(bh_result->b_data + size, 0, bh_result->b_size - size); + err = 0; + goto done; } + + /* + * The area has not been written, clear mapped for read/bmap cases. + * If so, it will be filled with zero without reading from disk. + */ + clear_buffer_mapped(bh_result); done: bh_result->b_size = EXFAT_BLK_TO_B(max_blocks, sb); if (err < 0)

From: Trond Myklebust trond.myklebust@hammerspace.com

[ Upstream commit 9e8f324bd44c1fe026b582b75213de4eccfa1163 ]

Check that the delegation is still attached after taking the spin lock in nfs_start_delegation_return_locked().

Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/delegation.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c index 325ba0663a6de..8bdbc4dca89ca 100644 --- a/fs/nfs/delegation.c +++ b/fs/nfs/delegation.c @@ -307,7 +307,8 @@ nfs_start_delegation_return_locked(struct nfs_inode *nfsi) if (delegation == NULL) goto out; spin_lock(&delegation->lock); - if (!test_and_set_bit(NFS_DELEGATION_RETURNING, &delegation->flags)) { + if (delegation->inode && + !test_and_set_bit(NFS_DELEGATION_RETURNING, &delegation->flags)) { clear_bit(NFS_DELEGATION_RETURN_DELAYED, &delegation->flags); /* Refcount matched in nfs_end_delegation_return() */ ret = nfs_get_delegation(delegation);

From: Trond Myklebust trond.myklebust@hammerspace.com

[ Upstream commit 14e41b16e8cb677bb440dca2edba8b041646c742 ]

Once a task calls exit_signals() it can no longer be signalled. So do not allow it to do killable waits.

Reviewed-by: Jeff Layton jlayton@kernel.org Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/sched.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index 9b45fbdc90cab..73bc39281ef5f 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -276,6 +276,8 @@ EXPORT_SYMBOL_GPL(rpc_destroy_wait_queue);

static int rpc_wait_bit_killable(struct wait_bit_key *key, int mode) { + if (unlikely(current->flags & PF_EXITING)) + return -EINTR; schedule(); if (signal_pending_state(mode, current)) return -ERESTARTSYS;

From: Yi Liu yi.l.liu@intel.com

[ Upstream commit 803f97298e7de9242eb677a1351dcafbbcc9117e ]

PASID usage requires PASID support in both device and IOMMU. Since the iommu drivers always enable the PASID capability for the device if it is supported, this extends the IOMMU_GET_HW_INFO to report the PASID capability to userspace. Also, enhances the selftest accordingly.

Link: https://patch.msgid.link/r/20250321180143.8468-5-yi.l.liu@intel.com Cc: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Kevin Tian kevin.tian@intel.com Reviewed-by: Jason Gunthorpe jgg@nvidia.com Tested-by: Zhangfei Gao zhangfei.gao@linaro.org #aarch64 platform Tested-by: Nicolin Chen nicolinc@nvidia.com Signed-off-by: Yi Liu yi.l.liu@intel.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/iommufd/device.c | 34 +++++++++++++++++++++++++++++++++- drivers/pci/ats.c | 33 +++++++++++++++++++++++++++++++++ include/linux/pci-ats.h | 3 +++ include/uapi/linux/iommufd.h | 14 +++++++++++++- 4 files changed, 82 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/iommufd/device.c b/drivers/iommu/iommufd/device.c index 3fd8920e79ffb..74480ae6bfc0b 100644 --- a/drivers/iommu/iommufd/device.c +++ b/drivers/iommu/iommufd/device.c @@ -3,6 +3,7 @@ */ #include <linux/iommu.h> #include <linux/iommufd.h> +#include <linux/pci-ats.h> #include <linux/slab.h> #include <uapi/linux/iommufd.h>

@@ -1304,7 +1305,8 @@ int iommufd_get_hw_info(struct iommufd_ucmd *ucmd) void *data; int rc;

- if (cmd->flags || cmd->__reserved) + if (cmd->flags || cmd->__reserved[0] || cmd->__reserved[1] || + cmd->__reserved[2]) return -EOPNOTSUPP;

idev = iommufd_get_device(ucmd, cmd->dev_id); @@ -1361,6 +1363,36 @@ int iommufd_get_hw_info(struct iommufd_ucmd *ucmd) if (device_iommu_capable(idev->dev, IOMMU_CAP_DIRTY_TRACKING)) cmd->out_capabilities |= IOMMU_HW_CAP_DIRTY_TRACKING;

+ cmd->out_max_pasid_log2 = 0; + /* + * Currently, all iommu drivers enable PASID in the probe_device() + * op if iommu and device supports it. So the max_pasids stored in + * dev->iommu indicates both PASID support and enable status. A + * non-zero dev->iommu->max_pasids means PASID is supported and + * enabled. The iommufd only reports PASID capability to userspace + * if it's enabled. + */ + if (idev->dev->iommu->max_pasids) { + cmd->out_max_pasid_log2 = ilog2(idev->dev->iommu->max_pasids); + + if (dev_is_pci(idev->dev)) { + struct pci_dev *pdev = to_pci_dev(idev->dev); + int ctrl; + + ctrl = pci_pasid_status(pdev); + + WARN_ON_ONCE(ctrl < 0 || + !(ctrl & PCI_PASID_CTRL_ENABLE)); + + if (ctrl & PCI_PASID_CTRL_EXEC) + cmd->out_capabilities |= + IOMMU_HW_CAP_PCI_PASID_EXEC; + if (ctrl & PCI_PASID_CTRL_PRIV) + cmd->out_capabilities |= + IOMMU_HW_CAP_PCI_PASID_PRIV; + } + } + rc = iommufd_ucmd_respond(ucmd, sizeof(*cmd)); out_free: kfree(data); diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c index 6afff1f1b1430..c331b108e71de 100644 --- a/drivers/pci/ats.c +++ b/drivers/pci/ats.c @@ -538,4 +538,37 @@ int pci_max_pasids(struct pci_dev *pdev) return (1 << FIELD_GET(PCI_PASID_CAP_WIDTH, supported)); } EXPORT_SYMBOL_GPL(pci_max_pasids); + +/** + * pci_pasid_status - Check the PASID status + * @pdev: PCI device structure + * + * Returns a negative value when no PASID capability is present. + * Otherwise the value of the control register is returned. + * Status reported are: + * + * PCI_PASID_CTRL_ENABLE - PASID enabled + * PCI_PASID_CTRL_EXEC - Execute permission enabled + * PCI_PASID_CTRL_PRIV - Privileged mode enabled + */ +int pci_pasid_status(struct pci_dev *pdev) +{ + int pasid; + u16 ctrl; + + if (pdev->is_virtfn) + pdev = pci_physfn(pdev); + + pasid = pdev->pasid_cap; + if (!pasid) + return -EINVAL; + + pci_read_config_word(pdev, pasid + PCI_PASID_CTRL, &ctrl); + + ctrl &= PCI_PASID_CTRL_ENABLE | PCI_PASID_CTRL_EXEC | + PCI_PASID_CTRL_PRIV; + + return ctrl; +} +EXPORT_SYMBOL_GPL(pci_pasid_status); #endif /* CONFIG_PCI_PASID */ diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h index 0e8b74e63767a..75c6c86cf09dc 100644 --- a/include/linux/pci-ats.h +++ b/include/linux/pci-ats.h @@ -42,6 +42,7 @@ int pci_enable_pasid(struct pci_dev *pdev, int features); void pci_disable_pasid(struct pci_dev *pdev); int pci_pasid_features(struct pci_dev *pdev); int pci_max_pasids(struct pci_dev *pdev); +int pci_pasid_status(struct pci_dev *pdev); #else /* CONFIG_PCI_PASID */ static inline int pci_enable_pasid(struct pci_dev *pdev, int features) { return -EINVAL; } @@ -50,6 +51,8 @@ static inline int pci_pasid_features(struct pci_dev *pdev) { return -EINVAL; } static inline int pci_max_pasids(struct pci_dev *pdev) { return -EINVAL; } +static inline int pci_pasid_status(struct pci_dev *pdev) +{ return -EINVAL; } #endif /* CONFIG_PCI_PASID */

#endif /* LINUX_PCI_ATS_H */ diff --git a/include/uapi/linux/iommufd.h b/include/uapi/linux/iommufd.h index 8c4470742dcd9..41048271a0667 100644 --- a/include/uapi/linux/iommufd.h +++ b/include/uapi/linux/iommufd.h @@ -504,9 +504,17 @@ enum iommu_hw_info_type { * IOMMU_HWPT_GET_DIRTY_BITMAP * IOMMU_HWPT_SET_DIRTY_TRACKING * + * @IOMMU_HW_CAP_PCI_PASID_EXEC: Execute Permission Supported, user ignores it + * when the struct + * iommu_hw_info::out_max_pasid_log2 is zero. + * @IOMMU_HW_CAP_PCI_PASID_PRIV: Privileged Mode Supported, user ignores it + * when the struct + * iommu_hw_info::out_max_pasid_log2 is zero. */ enum iommufd_hw_capabilities { IOMMU_HW_CAP_DIRTY_TRACKING = 1 << 0, + IOMMU_HW_CAP_PCI_PASID_EXEC = 1 << 1, + IOMMU_HW_CAP_PCI_PASID_PRIV = 1 << 2, };

/** @@ -522,6 +530,9 @@ enum iommufd_hw_capabilities { * iommu_hw_info_type. * @out_capabilities: Output the generic iommu capability info type as defined * in the enum iommu_hw_capabilities. + * @out_max_pasid_log2: Output the width of PASIDs. 0 means no PASID support. + * PCI devices turn to out_capabilities to check if the + * specific capabilities is supported or not. * @__reserved: Must be 0 * * Query an iommu type specific hardware information data from an iommu behind @@ -545,7 +556,8 @@ struct iommu_hw_info { __u32 data_len; __aligned_u64 data_uptr; __u32 out_data_type; - __u32 __reserved; + __u8 out_max_pasid_log2; + __u8 __reserved[3]; __aligned_u64 out_capabilities; }; #define IOMMU_GET_HW_INFO _IO(IOMMUFD_TYPE, IOMMUFD_CMD_GET_HW_INFO)

From: Diogo Ivo diogo.ivo@siemens.com

[ Upstream commit f06777cf2bbc21dd8c71d6e3906934e56b4e18e4 ]

Intel Over-Clocking Watchdogs are described in ACPI tables by both the generic PNP0C02 _CID and their ACPI _HID. The presence of the _CID then causes the PNP scan handler to attach to the watchdog, preventing the actual watchdog driver from binding. Address this by adding the ACPI _HIDs to the list of non-PNP devices, so that the PNP scan handler is bypassed.

Note that these watchdogs can be described by multiple _HIDs for what seems to be identical hardware. This commit is not a complete list of all the possible watchdog ACPI _HIDs.

Signed-off-by: Diogo Ivo diogo.ivo@siemens.com Link: https://patch.msgid.link/20250317-ivo-intel_oc_wdt-v3-2-32c396f4eefd@siemens... Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpi_pnp.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/acpi/acpi_pnp.c b/drivers/acpi/acpi_pnp.c index 01abf26764b00..3f5a1840f5733 100644 --- a/drivers/acpi/acpi_pnp.c +++ b/drivers/acpi/acpi_pnp.c @@ -355,8 +355,10 @@ static bool acpi_pnp_match(const char *idstr, const struct acpi_device_id **matc * device represented by it. */ static const struct acpi_device_id acpi_nonpnp_device_ids[] = { + {"INT3F0D"}, {"INTC1080"}, {"INTC1081"}, + {"INTC1099"}, {""}, };

From: Sudeep Holla sudeep.holla@arm.com

[ Upstream commit d181acea5b864e91f38f5771b8961215ce5017ae ]

The Platform Communication Channel (PCC) mailbox driver currently uses ioremap() to map channel shared memory regions. However it is preferred to use acpi_os_ioremap(), which is mapping function specific to EFI/ACPI defined memory regions. It ensures that the correct memory attributes are applied when mapping ACPI-provided regions.

While at it, also add checks for handling any errors with the mapping.

Acked-by: Huisong Li lihuisong@huawei.com Tested-by: Huisong Li lihuisong@huawei.com Tested-by: Adam Young admiyo@os.amperecomputing.com Signed-off-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Jassi Brar jassisinghbrar@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mailbox/pcc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c index f8215a8f656a4..49254d99a8ad6 100644 --- a/drivers/mailbox/pcc.c +++ b/drivers/mailbox/pcc.c @@ -419,8 +419,12 @@ int pcc_mbox_ioremap(struct mbox_chan *chan) return -1; pchan_info = chan->con_priv; pcc_mbox_chan = &pchan_info->chan; - pcc_mbox_chan->shmem = ioremap(pcc_mbox_chan->shmem_base_addr, - pcc_mbox_chan->shmem_size); + + pcc_mbox_chan->shmem = acpi_os_ioremap(pcc_mbox_chan->shmem_base_addr, + pcc_mbox_chan->shmem_size); + if (!pcc_mbox_chan->shmem) + return -ENXIO; + return 0; } EXPORT_SYMBOL_GPL(pcc_mbox_ioremap);

From: Samuel Holland samuel.holland@sifive.com

[ Upstream commit 2c0391b29b27f315c1b4c29ffde66f50b29fab99 ]

NOMMU kernels currently cannot access memory below the kernel link address. Remove this restriction by setting PAGE_OFFSET to the actual start of RAM, as determined from the devicetree. The kernel link address must be a constant, so keep using CONFIG_PAGE_OFFSET for that purpose.

Signed-off-by: Samuel Holland samuel.holland@sifive.com Reviewed-by: Jesse Taube mr.bossman075@gmail.com Link: https://lore.kernel.org/r/20241026171441.3047904-3-samuel.holland@sifive.com Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/include/asm/page.h | 12 ++++-------- arch/riscv/include/asm/pgtable.h | 2 +- 2 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h index febf820d50583..e8beadc2bffda 100644 --- a/arch/riscv/include/asm/page.h +++ b/arch/riscv/include/asm/page.h @@ -26,12 +26,9 @@ * When not using MMU this corresponds to the first free page in * physical memory (aligned on a page boundary). */ -#ifdef CONFIG_64BIT #ifdef CONFIG_MMU +#ifdef CONFIG_64BIT #define PAGE_OFFSET kernel_map.page_offset -#else -#define PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL) -#endif /* * By default, CONFIG_PAGE_OFFSET value corresponds to SV57 address space so * define the PAGE_OFFSET value for SV48 and SV39. @@ -41,6 +38,9 @@ #else #define PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL) #endif /* CONFIG_64BIT */ +#else +#define PAGE_OFFSET ((unsigned long)phys_ram_base) +#endif /* CONFIG_MMU */

#ifndef __ASSEMBLY__

@@ -97,11 +97,7 @@ typedef struct page *pgtable_t; #define MIN_MEMBLOCK_ADDR 0 #endif

-#ifdef CONFIG_MMU #define ARCH_PFN_OFFSET (PFN_DOWN((unsigned long)phys_ram_base)) -#else -#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) -#endif /* CONFIG_MMU */

struct kernel_mapping { unsigned long page_offset; diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h index c0866ada5bbc4..479550cdb440f 100644 --- a/arch/riscv/include/asm/pgtable.h +++ b/arch/riscv/include/asm/pgtable.h @@ -12,7 +12,7 @@ #include <asm/pgtable-bits.h>

#ifndef CONFIG_MMU -#define KERNEL_LINK_ADDR PAGE_OFFSET +#define KERNEL_LINK_ADDR _AC(CONFIG_PAGE_OFFSET, UL) #define KERN_VIRT_SIZE (UL(-1)) #else

From: Zsolt Kajtar soci@c64.rulez.org

[ Upstream commit 892c788d73fe4a94337ed092cb998c49fa8ecaf4 ]

The erase colour calculation for fbcon clearing should use get_color instead of attr_col_ec, like everything else. The latter is similar but is not correct. For example it's missing the depth dependent remapping and doesn't care about blanking.

The problem can be reproduced by setting up the background colour to grey (vt.color=0x70) and having an fbcon console set to 2bpp (4 shades of gray). Now the background attribute should be 1 (dark gray) on the console.

If the screen is scrolled when pressing enter in a shell prompt at the bottom line then the new line is cleared using colour 7 instead of 1. That's not something fillrect likes (at 2bbp it expect 0-3) so the result is interesting.

This patch switches to get_color with vc_video_erase_char to determine the erase colour from attr_col_ec. That makes the latter function redundant as no other users were left.

Use correct erase colour for clearing in fbcon

Signed-off-by: Zsolt Kajtar soci@c64.rulez.org Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/core/bitblit.c | 5 ++-- drivers/video/fbdev/core/fbcon.c | 10 +++++--- drivers/video/fbdev/core/fbcon.h | 38 +--------------------------- drivers/video/fbdev/core/fbcon_ccw.c | 5 ++-- drivers/video/fbdev/core/fbcon_cw.c | 5 ++-- drivers/video/fbdev/core/fbcon_ud.c | 5 ++-- drivers/video/fbdev/core/tileblit.c | 8 +++--- 7 files changed, 18 insertions(+), 58 deletions(-)

diff --git a/drivers/video/fbdev/core/bitblit.c b/drivers/video/fbdev/core/bitblit.c index 3ff1b2a8659e8..f9475c14f7339 100644 --- a/drivers/video/fbdev/core/bitblit.c +++ b/drivers/video/fbdev/core/bitblit.c @@ -59,12 +59,11 @@ static void bit_bmove(struct vc_data *vc, struct fb_info *info, int sy, }

static void bit_clear(struct vc_data *vc, struct fb_info *info, int sy, - int sx, int height, int width) + int sx, int height, int width, int fg, int bg) { - int bgshift = (vc->vc_hi_font_mask) ? 13 : 12; struct fb_fillrect region;

- region.color = attr_bgcol_ec(bgshift, vc, info); + region.color = bg; region.dx = sx * vc->vc_font.width; region.dy = sy * vc->vc_font.height; region.width = width * vc->vc_font.width; diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c index e8b4e8c119b5c..07d127110ca4c 100644 --- a/drivers/video/fbdev/core/fbcon.c +++ b/drivers/video/fbdev/core/fbcon.c @@ -1258,7 +1258,7 @@ static void __fbcon_clear(struct vc_data *vc, unsigned int sy, unsigned int sx, { struct fb_info *info = fbcon_info_from_console(vc->vc_num); struct fbcon_ops *ops = info->fbcon_par; - + int fg, bg; struct fbcon_display *p = &fb_display[vc->vc_num]; u_int y_break;

@@ -1279,16 +1279,18 @@ static void __fbcon_clear(struct vc_data *vc, unsigned int sy, unsigned int sx, fbcon_clear_margins(vc, 0); }

+ fg = get_color(vc, info, vc->vc_video_erase_char, 1); + bg = get_color(vc, info, vc->vc_video_erase_char, 0); /* Split blits that cross physical y_wrap boundary */

y_break = p->vrows - p->yscroll; if (sy < y_break && sy + height - 1 >= y_break) { u_int b = y_break - sy; - ops->clear(vc, info, real_y(p, sy), sx, b, width); + ops->clear(vc, info, real_y(p, sy), sx, b, width, fg, bg); ops->clear(vc, info, real_y(p, sy + b), sx, height - b, - width); + width, fg, bg); } else - ops->clear(vc, info, real_y(p, sy), sx, height, width); + ops->clear(vc, info, real_y(p, sy), sx, height, width, fg, bg); }

static void fbcon_clear(struct vc_data *vc, unsigned int sy, unsigned int sx, diff --git a/drivers/video/fbdev/core/fbcon.h b/drivers/video/fbdev/core/fbcon.h index df70ea5ec5b37..4d97e6d8a16a2 100644 --- a/drivers/video/fbdev/core/fbcon.h +++ b/drivers/video/fbdev/core/fbcon.h @@ -55,7 +55,7 @@ struct fbcon_ops { void (*bmove)(struct vc_data *vc, struct fb_info *info, int sy, int sx, int dy, int dx, int height, int width); void (*clear)(struct vc_data *vc, struct fb_info *info, int sy, - int sx, int height, int width); + int sx, int height, int width, int fb, int bg); void (*putcs)(struct vc_data *vc, struct fb_info *info, const unsigned short *s, int count, int yy, int xx, int fg, int bg); @@ -116,42 +116,6 @@ static inline int mono_col(const struct fb_info *info) return (~(0xfff << max_len)) & 0xff; }

-static inline int attr_col_ec(int shift, struct vc_data *vc, - struct fb_info *info, int is_fg) -{ - int is_mono01; - int col; - int fg; - int bg; - - if (!vc) - return 0; - - if (vc->vc_can_do_color) - return is_fg ? attr_fgcol(shift,vc->vc_video_erase_char) - : attr_bgcol(shift,vc->vc_video_erase_char); - - if (!info) - return 0; - - col = mono_col(info); - is_mono01 = info->fix.visual == FB_VISUAL_MONO01; - - if (attr_reverse(vc->vc_video_erase_char)) { - fg = is_mono01 ? col : 0; - bg = is_mono01 ? 0 : col; - } - else { - fg = is_mono01 ? 0 : col; - bg = is_mono01 ? col : 0; - } - - return is_fg ? fg : bg; -} - -#define attr_bgcol_ec(bgshift, vc, info) attr_col_ec(bgshift, vc, info, 0) -#define attr_fgcol_ec(fgshift, vc, info) attr_col_ec(fgshift, vc, info, 1) - /* * Scroll Method */ diff --git a/drivers/video/fbdev/core/fbcon_ccw.c b/drivers/video/fbdev/core/fbcon_ccw.c index f9b794ff7d396..89ef4ba7e8672 100644 --- a/drivers/video/fbdev/core/fbcon_ccw.c +++ b/drivers/video/fbdev/core/fbcon_ccw.c @@ -78,14 +78,13 @@ static void ccw_bmove(struct vc_data *vc, struct fb_info *info, int sy, }

static void ccw_clear(struct vc_data *vc, struct fb_info *info, int sy, - int sx, int height, int width) + int sx, int height, int width, int fg, int bg) { struct fbcon_ops *ops = info->fbcon_par; struct fb_fillrect region; - int bgshift = (vc->vc_hi_font_mask) ? 13 : 12; u32 vyres = GETVYRES(ops->p, info);

- region.color = attr_bgcol_ec(bgshift,vc,info); + region.color = bg; region.dx = sy * vc->vc_font.height; region.dy = vyres - ((sx + width) * vc->vc_font.width); region.height = width * vc->vc_font.width; diff --git a/drivers/video/fbdev/core/fbcon_cw.c b/drivers/video/fbdev/core/fbcon_cw.c index 903f6fc174e14..b9dac7940fb77 100644 --- a/drivers/video/fbdev/core/fbcon_cw.c +++ b/drivers/video/fbdev/core/fbcon_cw.c @@ -63,14 +63,13 @@ static void cw_bmove(struct vc_data *vc, struct fb_info *info, int sy, }

static void cw_clear(struct vc_data *vc, struct fb_info *info, int sy, - int sx, int height, int width) + int sx, int height, int width, int fg, int bg) { struct fbcon_ops *ops = info->fbcon_par; struct fb_fillrect region; - int bgshift = (vc->vc_hi_font_mask) ? 13 : 12; u32 vxres = GETVXRES(ops->p, info);

- region.color = attr_bgcol_ec(bgshift,vc,info); + region.color = bg; region.dx = vxres - ((sy + height) * vc->vc_font.height); region.dy = sx * vc->vc_font.width; region.height = width * vc->vc_font.width; diff --git a/drivers/video/fbdev/core/fbcon_ud.c b/drivers/video/fbdev/core/fbcon_ud.c index 594331936fd3c..0af7913a2abdc 100644 --- a/drivers/video/fbdev/core/fbcon_ud.c +++ b/drivers/video/fbdev/core/fbcon_ud.c @@ -64,15 +64,14 @@ static void ud_bmove(struct vc_data *vc, struct fb_info *info, int sy, }

static void ud_clear(struct vc_data *vc, struct fb_info *info, int sy, - int sx, int height, int width) + int sx, int height, int width, int fg, int bg) { struct fbcon_ops *ops = info->fbcon_par; struct fb_fillrect region; - int bgshift = (vc->vc_hi_font_mask) ? 13 : 12; u32 vyres = GETVYRES(ops->p, info); u32 vxres = GETVXRES(ops->p, info);

- region.color = attr_bgcol_ec(bgshift,vc,info); + region.color = bg; region.dy = vyres - ((sy + height) * vc->vc_font.height); region.dx = vxres - ((sx + width) * vc->vc_font.width); region.width = width * vc->vc_font.width; diff --git a/drivers/video/fbdev/core/tileblit.c b/drivers/video/fbdev/core/tileblit.c index eff7ec4da1671..45b0828fad1cf 100644 --- a/drivers/video/fbdev/core/tileblit.c +++ b/drivers/video/fbdev/core/tileblit.c @@ -32,16 +32,14 @@ static void tile_bmove(struct vc_data *vc, struct fb_info *info, int sy, }

static void tile_clear(struct vc_data *vc, struct fb_info *info, int sy, - int sx, int height, int width) + int sx, int height, int width, int fg, int bg) { struct fb_tilerect rect; - int bgshift = (vc->vc_hi_font_mask) ? 13 : 12; - int fgshift = (vc->vc_hi_font_mask) ? 9 : 8;

rect.index = vc->vc_video_erase_char & ((vc->vc_hi_font_mask) ? 0x1ff : 0xff); - rect.fg = attr_fgcol_ec(fgshift, vc, info); - rect.bg = attr_bgcol_ec(bgshift, vc, info); + rect.fg = fg; + rect.bg = bg; rect.sx = sx; rect.sy = sy; rect.width = width;

From: Pali Rohár pali@kernel.org

[ Upstream commit be786e509c1af9b2dcf25c3d601f05c8c251f482 ]

Windows SMB servers (including SMB2+) which are working over RFC1001 require that Netbios server name specified in RFC1001 Session Request packet is same as the UNC host name. Netbios server name can be already specified manually via -o servern= option.

With this change the RFC1001 server name is set automatically by extracting the hostname from the mount source.

Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/fs_context.c | 11 +++++++++++ 1 file changed, 11 insertions(+)

diff --git a/fs/smb/client/fs_context.c b/fs/smb/client/fs_context.c index 66d872d63f839..d6685679f84da 100644 --- a/fs/smb/client/fs_context.c +++ b/fs/smb/client/fs_context.c @@ -1028,6 +1028,7 @@ static int smb3_fs_context_parse_param(struct fs_context *fc, int i, opt; bool is_smb3 = !strcmp(fc->fs_type->name, "smb3"); bool skip_parsing = false; + char *hostname;

cifs_dbg(FYI, "CIFS: parsing cifs mount option '%s'\n", param->key);

@@ -1360,6 +1361,16 @@ static int smb3_fs_context_parse_param(struct fs_context *fc, cifs_errorf(fc, "OOM when copying UNC string\n"); goto cifs_parse_mount_err; } + hostname = extract_hostname(ctx->UNC); + if (IS_ERR(hostname)) { + cifs_errorf(fc, "Cannot extract hostname from UNC string\n"); + goto cifs_parse_mount_err; + } + /* last byte, type, is 0x20 for servr type */ + memset(ctx->target_rfc1001_name, 0x20, RFC1001_NAME_LEN_WITH_NULL); + for (i = 0; i < RFC1001_NAME_LEN && hostname[i] != 0; i++) + ctx->target_rfc1001_name[i] = toupper(hostname[i]); + kfree(hostname); break; case Opt_user: kfree(ctx->username);

From: Pali Rohár pali@kernel.org

[ Upstream commit 781802aa5a5950f99899f13ff9d760f5db81d36d ]

Function ip_rfc1001_connect() which establish NetBIOS session for SMB connections, currently uses smb_send() function for sending NetBIOS Session Request packet. This function expects that the passed buffer is SMB packet and for SMB2+ connections it mangles packet header, which breaks prepared NetBIOS Session Request packet. Result is that this function send garbage packet for SMB2+ connection, which SMB2+ server cannot parse. That function is not mangling packets for SMB1 connections, so it somehow works for SMB1.

Fix this problem and instead of smb_send(), use smb_send_kvec() function which does not mangle prepared packet, this function send them as is. Just API of this function takes struct msghdr (kvec) instead of packet buffer.

[MS-SMB2] specification allows SMB2 protocol to use NetBIOS as a transport protocol. NetBIOS can be used over TCP via port 139. So this is a valid configuration, just not so common. And even recent Windows versions (e.g. Windows Server 2022) still supports this configuration: SMB over TCP port 139, including for modern SMB2 and SMB3 dialects.

This change fixes SMB2 and SMB3 connections over TCP port 139 which requires establishing of NetBIOS session. Tested that this change fixes establishing of SMB2 and SMB3 connections with Windows Server 2022.

Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/cifsproto.h | 3 +++ fs/smb/client/connect.c | 20 +++++++++++++++----- fs/smb/client/transport.c | 2 +- 3 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/fs/smb/client/cifsproto.h b/fs/smb/client/cifsproto.h index 90b7b30abfbd8..306386e5c171f 100644 --- a/fs/smb/client/cifsproto.h +++ b/fs/smb/client/cifsproto.h @@ -31,6 +31,9 @@ extern void cifs_small_buf_release(void *); extern void free_rsp_buf(int, void *); extern int smb_send(struct TCP_Server_Info *, struct smb_hdr *, unsigned int /* length */); +extern int smb_send_kvec(struct TCP_Server_Info *server, + struct msghdr *msg, + size_t *sent); extern unsigned int _get_xid(void); extern void _free_xid(unsigned int); #define get_xid() \ diff --git a/fs/smb/client/connect.c b/fs/smb/client/connect.c index 1a0748fb16dd5..4d0701c81d4eb 100644 --- a/fs/smb/client/connect.c +++ b/fs/smb/client/connect.c @@ -3043,8 +3043,10 @@ ip_rfc1001_connect(struct TCP_Server_Info *server) * sessinit is sent but no second negprot */ struct rfc1002_session_packet req = {}; - struct smb_hdr *smb_buf = (struct smb_hdr *)&req; + struct msghdr msg = {}; + struct kvec iov = {}; unsigned int len; + size_t sent;

req.trailer.session_req.called_len = sizeof(req.trailer.session_req.called_name);

@@ -3073,10 +3075,18 @@ ip_rfc1001_connect(struct TCP_Server_Info *server) * As per rfc1002, @len must be the number of bytes that follows the * length field of a rfc1002 session request payload. */ - len = sizeof(req) - offsetof(struct rfc1002_session_packet, trailer.session_req); + len = sizeof(req.trailer.session_req); + req.type = RFC1002_SESSION_REQUEST; + req.flags = 0; + req.length = cpu_to_be16(len); + len += offsetof(typeof(req), trailer.session_req); + iov.iov_base = &req; + iov.iov_len = len; + iov_iter_kvec(&msg.msg_iter, ITER_SOURCE, &iov, 1, len); + rc = smb_send_kvec(server, &msg, &sent); + if (rc < 0 || len != sent) + return (rc == -EINTR || rc == -EAGAIN) ? rc : -ECONNABORTED;

- smb_buf->smb_buf_length = cpu_to_be32((RFC1002_SESSION_REQUEST << 24) | len); - rc = smb_send(server, smb_buf, len); /* * RFC1001 layer in at least one server requires very short break before * negprot presumably because not expecting negprot to follow so fast. @@ -3085,7 +3095,7 @@ ip_rfc1001_connect(struct TCP_Server_Info *server) */ usleep_range(1000, 2000);

- return rc; + return 0; }

static int diff --git a/fs/smb/client/transport.c b/fs/smb/client/transport.c index 91812150186c0..9f13a705f7f67 100644 --- a/fs/smb/client/transport.c +++ b/fs/smb/client/transport.c @@ -179,7 +179,7 @@ delete_mid(struct mid_q_entry *mid) * Our basic "send data to server" function. Should be called with srv_mutex * held. The caller is responsible for handling the results. */ -static int +int smb_send_kvec(struct TCP_Server_Info *server, struct msghdr *smb_msg, size_t *sent) {

From: Trond Myklebust trond.myklebust@hammerspace.com

[ Upstream commit bf9be373b830a3e48117da5d89bb6145a575f880 ]

The autobind setting was supposed to be determined in rpc_create(), since commit c2866763b402 ("SUNRPC: use sockaddr + size when creating remote transport endpoints").

Reviewed-by: Jeff Layton jlayton@kernel.org Reviewed-by: Benjamin Coddington bcodding@redhat.com Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/clnt.c | 3 --- 1 file changed, 3 deletions(-)

diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 0090162ee8c35..17a4de75bfaf6 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -270,9 +270,6 @@ static struct rpc_xprt *rpc_clnt_set_transport(struct rpc_clnt *clnt, old = rcu_dereference_protected(clnt->cl_xprt, lockdep_is_held(&clnt->cl_lock));

- if (!xprt_bound(xprt)) - clnt->cl_autobind = 1; - clnt->cl_timeout = timeout; rcu_assign_pointer(clnt->cl_xprt, xprt); spin_unlock(&clnt->cl_lock);

From: Luis de Arquer luis.dearquer@inertim.com

[ Upstream commit 7a874e8b54ea21094f7fd2d428b164394c6cb316 ]

Do not write native chip select stuff for GPIO chip selects. GPIOs can be numbered much higher than native CS. Also, it makes no sense.

Signed-off-by: Luis de Arquer luis.dearquer@inertim.com Link: https://patch.msgid.link/365ccddfba110549202b3520f4401a6a936e82a8.camel@gmai... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-rockchip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 40a64a598a749..5008489d6fac8 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -547,7 +547,7 @@ static int rockchip_spi_config(struct rockchip_spi *rs, cr0 |= (spi->mode & 0x3U) << CR0_SCPH_OFFSET; if (spi->mode & SPI_LSB_FIRST) cr0 |= CR0_FBM_LSB << CR0_FBM_OFFSET; - if (spi->mode & SPI_CS_HIGH) + if ((spi->mode & SPI_CS_HIGH) && !(spi_get_csgpiod(spi, 0))) cr0 |= BIT(spi_get_chipselect(spi, 0)) << CR0_SOI_OFFSET;

if (xfer->rx_buf && xfer->tx_buf)

From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

[ Upstream commit ed3b274abc4008efffebf1997968a3f2720a86d3 ]

VI sense port on WSA883x speaker takes only one channel, so use 0x1 as channel mask. This fixes garbage being recorded by the speaker when testing the VI sense feedback path.

Cc: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://patch.msgid.link/20250312-asoc-wsa88xx-visense-v1-1-9ca705881122@lin... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wsa883x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c index 47da5674d7c92..e31b7fb104e6c 100644 --- a/sound/soc/codecs/wsa883x.c +++ b/sound/soc/codecs/wsa883x.c @@ -529,7 +529,7 @@ static const struct sdw_port_config wsa883x_pconfig[WSA883X_MAX_SWR_PORTS] = { }, [WSA883X_PORT_VISENSE] = { .num = WSA883X_PORT_VISENSE + 1, - .ch_mask = 0x3, + .ch_mask = 0x1, }, };

From: Hans-Frieder Vogt hfdevel@gmx.net

[ Upstream commit 53377b5c2952097527b01ce2f1d9a9332f042f70 ]

Add the PCI-ID of the AQR105-based Tehuti TN4010 cards to allow loading of the tn40xx driver on these cards. Here, I chose the detailed definition with the subvendor ID similar to the QT2025 cards with the PCI-ID TEHUTI:0x4022, because there is a card with an AQ2104 hiding amongst the AQR105 cards, and they all come with the same PCI-ID (TEHUTI:0x4025). But the AQ2104 is currently not supported.

Signed-off-by: Hans-Frieder Vogt hfdevel@gmx.net Reviewed-by: Andrew Lunn andrew@lunn.ch Link: https://patch.msgid.link/20250322-tn9510-v3a-v7-7-672a9a3d8628@gmx.net Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/tehuti/tn40.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/tehuti/tn40.c b/drivers/net/ethernet/tehuti/tn40.c index 259bdac24cf21..a6965258441c4 100644 --- a/drivers/net/ethernet/tehuti/tn40.c +++ b/drivers/net/ethernet/tehuti/tn40.c @@ -1832,6 +1832,10 @@ static const struct pci_device_id tn40_id_table[] = { PCI_VENDOR_ID_ASUSTEK, 0x8709) }, { PCI_DEVICE_SUB(PCI_VENDOR_ID_TEHUTI, 0x4022, PCI_VENDOR_ID_EDIMAX, 0x8103) }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_TEHUTI, PCI_DEVICE_ID_TEHUTI_TN9510, + PCI_VENDOR_ID_TEHUTI, 0x3015) }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_TEHUTI, PCI_DEVICE_ID_TEHUTI_TN9510, + PCI_VENDOR_ID_EDIMAX, 0x8102) }, { } };

From: Nícolas F. R. A. Prado nfraprado@collabora.com

[ Upstream commit 2738fb3ec6838a10d2c4ce65cefdb3b90b11bd61 ]

Interrupts are enabled per sensor in lvts_update_irq_mask() as needed, there's no point in enabling all of them during initialization. Change the MONINT register initial value so all sensor interrupts start disabled.

Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Signed-off-by: Nícolas F. R. A. Prado nfraprado@collabora.com Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-4-07a... Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/mediatek/lvts_thermal.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c index 4b3225377e8f8..3295b27ab70d2 100644 --- a/drivers/thermal/mediatek/lvts_thermal.c +++ b/drivers/thermal/mediatek/lvts_thermal.c @@ -65,7 +65,6 @@ #define LVTS_HW_FILTER 0x0 #define LVTS_TSSEL_CONF 0x13121110 #define LVTS_CALSCALE_CONF 0x300 -#define LVTS_MONINT_CONF 0x0300318C

#define LVTS_MONINT_OFFSET_SENSOR0 0xC #define LVTS_MONINT_OFFSET_SENSOR1 0x180 @@ -929,7 +928,7 @@ static int lvts_irq_init(struct lvts_ctrl *lvts_ctrl) * The LVTS_MONINT register layout is the same as the LVTS_MONINTSTS * register, except we set the bits to enable the interrupt. */ - writel(LVTS_MONINT_CONF, LVTS_MONINT(lvts_ctrl->base)); + writel(0, LVTS_MONINT(lvts_ctrl->base));

return 0; }

From: Sean Wang sean.wang@mediatek.com

[ Upstream commit 6ac4233afb9a389a7629b7f812395d1d1eca5a83 ]

Ensure interrupts are not re-enabled when the IRQ handler has already been removed. This prevents unexpected IRQ handler execution due to stale or unhandled interrupts.

Modify btmtksdio_txrx_work to check if bdev->func->irq_handler exists before calling sdio_writel to enable interrupts.

Co-developed-by: Pedro Tsai pedro.tsai@mediatek.com Signed-off-by: Pedro Tsai pedro.tsai@mediatek.com Co-developed-by: Felix Freimann felix.freimann@mediatek.com Signed-off-by: Felix Freimann felix.freimann@mediatek.com Signed-off-by: Sean Wang sean.wang@mediatek.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bluetooth/btmtksdio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c index 11d33cd7b08fc..d4ea1ff07b3e7 100644 --- a/drivers/bluetooth/btmtksdio.c +++ b/drivers/bluetooth/btmtksdio.c @@ -610,7 +610,8 @@ static void btmtksdio_txrx_work(struct work_struct *work) } while (int_status || time_is_before_jiffies(txrx_timeout));

/* Enable interrupt */ - sdio_writel(bdev->func, C_INT_EN_SET, MTK_REG_CHLPCR, NULL); + if (bdev->func->irq_handler) + sdio_writel(bdev->func, C_INT_EN_SET, MTK_REG_CHLPCR, NULL);

sdio_release_host(bdev->func);

From: Oleg Nesterov oleg@redhat.com

[ Upstream commit 9133607de37a4887c6f89ed937176a0a0c1ebb17 ]

Consider a process with a group leader L and a sub-thread T. L does sys_exit(1), then T does sys_exit_group(2).

In this case wait_task_zombie(L) will notice SIGNAL_GROUP_EXIT and use L->signal->group_exit_code, this is correct.

But, before that, do_notify_parent(L) called by release_task(T) will use L->exit_code != L->signal->group_exit_code, and this is not consistent. We don't really care, I think that nobody relies on the info which comes with SIGCHLD, if nothing else SIGCHLD < SIGRTMIN can be queued only once.

But pidfs_exit() is more problematic, I think pidfs_exit_info->exit_code should report ->group_exit_code in this case, just like wait_task_zombie().

TODO: with this change we can hopefully cleanup (or may be even kill) the similar SIGNAL_GROUP_EXIT checks, at least in wait_task_zombie().

Signed-off-by: Oleg Nesterov oleg@redhat.com Link: https://lore.kernel.org/r/20250324171941.GA13114@redhat.com Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/exit.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/kernel/exit.c b/kernel/exit.c index 619f0014c33be..9d888f26bf784 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -266,6 +266,9 @@ void release_task(struct task_struct *p) leader = p->group_leader; if (leader != p && thread_group_empty(leader) && leader->exit_state == EXIT_ZOMBIE) { + /* for pidfs_exit() and do_notify_parent() */ + if (leader->signal->flags & SIGNAL_GROUP_EXIT) + leader->exit_code = leader->signal->group_exit_code; /* * If we were the last child thread and the leader has * exited already, and the leader's parent ignores SIGCHLD,

From: Ryo Takakura ryotkkr98@gmail.com

[ Upstream commit 61c39d8c83e2077f33e0a2c8980a76a7f323f0ce ]

Since:

0c1d7a2c2d32 ("lockdep: Remove softirq accounting on PREEMPT_RT.")

the wait context test for mutex usage within "in softirq context" fails as it references @softirq_context:

| wait context tests | -------------------------------------------------------------------------- | rcu | raw | spin |mutex | -------------------------------------------------------------------------- in hardirq context: ok | ok | ok | ok | in hardirq context (not threaded): ok | ok | ok | ok | in softirq context: ok | ok | ok |FAILED|

As a fix, add lockdep map for BH disabled section. This fixes the issue by letting us catch cases when local_bh_disable() gets called with preemption disabled where local_lock doesn't get acquired. In the case of "in softirq context" selftest, local_bh_disable() was being called with preemption disable as it's early in the boot.

[ boqun: Move the lockdep annotations into __local_bh_*() to avoid false positives because of unpaired local_bh_disable() reported by Borislav Petkov and Peter Zijlstra, and make bh_lock_map only exist for PREEMPT_RT. ]

[ mingo: Restored authorship and improved the bh_lock_map definition. ]

Signed-off-by: Ryo Takakura ryotkkr98@gmail.com Signed-off-by: Boqun Feng boqun.feng@gmail.com Signed-off-by: Ingo Molnar mingo@kernel.org Link: https://lore.kernel.org/r/20250321143322.79651-1-boqun.feng@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/softirq.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)

diff --git a/kernel/softirq.c b/kernel/softirq.c index 8c4524ce65faf..00ff176350413 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -126,6 +126,18 @@ static DEFINE_PER_CPU(struct softirq_ctrl, softirq_ctrl) = { .lock = INIT_LOCAL_LOCK(softirq_ctrl.lock), };

+#ifdef CONFIG_DEBUG_LOCK_ALLOC +static struct lock_class_key bh_lock_key; +struct lockdep_map bh_lock_map = { + .name = "local_bh", + .key = &bh_lock_key, + .wait_type_outer = LD_WAIT_FREE, + .wait_type_inner = LD_WAIT_CONFIG, /* PREEMPT_RT makes BH preemptible. */ + .lock_type = LD_LOCK_PERCPU, +}; +EXPORT_SYMBOL_GPL(bh_lock_map); +#endif + /** * local_bh_blocked() - Check for idle whether BH processing is blocked * @@ -148,6 +160,8 @@ void __local_bh_disable_ip(unsigned long ip, unsigned int cnt)

WARN_ON_ONCE(in_hardirq());

+ lock_map_acquire_read(&bh_lock_map); + /* First entry of a task into a BH disabled section? */ if (!current->softirq_disable_cnt) { if (preemptible()) { @@ -211,6 +225,8 @@ void __local_bh_enable_ip(unsigned long ip, unsigned int cnt) WARN_ON_ONCE(in_hardirq()); lockdep_assert_irqs_enabled();

+ lock_map_release(&bh_lock_map); + local_irq_save(flags); curcnt = __this_cpu_read(softirq_ctrl.cnt);

@@ -261,6 +277,8 @@ static inline void ksoftirqd_run_begin(void) /* Counterpart to ksoftirqd_run_begin() */ static inline void ksoftirqd_run_end(void) { + /* pairs with the lock_map_acquire_read() in ksoftirqd_run_begin() */ + lock_map_release(&bh_lock_map); __local_bh_enable(SOFTIRQ_OFFSET, true); WARN_ON_ONCE(in_interrupt()); local_irq_enable();

From: Frank Li Frank.Li@nxp.com

[ Upstream commit f3e1dccba0a0833fc9a05fb838ebeb6ea4ca0e1a ]

Most systems' PCIe outbound map windows have non-zero physical addresses, but the possibility of encountering zero increased after following commit ("PCI: dwc: Use parent_bus_offset").

'ep->outbound_addr[n]', representing 'parent_bus_address', might be 0 on some hardware, which trims high address bits through bus fabric before sending to the PCIe controller.

Replace the iteration logic with 'for_each_set_bit()' to ensure only allocated map windows are iterated when determining the ATU index from a given address.

Link: https://lore.kernel.org/r/20250315201548.858189-12-helgaas@kernel.org Signed-off-by: Frank Li Frank.Li@nxp.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/dwc/pcie-designware-ep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c index dea19250598a6..9e7e94f32b436 100644 --- a/drivers/pci/controller/dwc/pcie-designware-ep.c +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c @@ -280,7 +280,7 @@ static int dw_pcie_find_index(struct dw_pcie_ep *ep, phys_addr_t addr, u32 index; struct dw_pcie *pci = to_dw_pcie_from_ep(ep);

- for (index = 0; index < pci->num_ob_windows; index++) { + for_each_set_bit(index, ep->ob_window_map, pci->num_ob_windows) { if (ep->outbound_addr[index] != addr) continue; *atu_index = index;

From: Ian Rogers irogers@google.com

[ Upstream commit 935e7cb5bb80106ff4f2fe39640f430134ef8cd8 ]

Separate test log files from object files. Depend on test log output but don't pass to the linker.

Reviewed-by: James Clark james.clark@linaro.org Signed-off-by: Ian Rogers irogers@google.com Link: https://lore.kernel.org/r/20250311213628.569562-2-irogers@google.com Signed-off-by: Namhyung Kim namhyung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/build/Makefile.build | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/tools/build/Makefile.build b/tools/build/Makefile.build index 5fb3fb3d97e0f..ffe988867703b 100644 --- a/tools/build/Makefile.build +++ b/tools/build/Makefile.build @@ -149,6 +149,10 @@ objprefix := $(subst ./,,$(OUTPUT)$(dir)/) obj-y := $(addprefix $(objprefix),$(obj-y)) subdir-obj-y := $(addprefix $(objprefix),$(subdir-obj-y))

+# Separate out test log files from real build objects. +test-y := $(filter %_log, $(obj-y)) +obj-y := $(filter-out %_log, $(obj-y)) + # Final '$(obj)-in.o' object in-target := $(objprefix)$(obj)-in.o

@@ -159,7 +163,7 @@ $(subdir-y):

$(sort $(subdir-obj-y)): $(subdir-y) ;

-$(in-target): $(obj-y) FORCE +$(in-target): $(obj-y) $(test-y) FORCE $(call rule_mkdir) $(call if_changed,$(host)ld_multi)

From: Flora Cui flora.cui@amd.com

[ Upstream commit 017fbb6690c2245b1b4ef39b66c79d2990fe63dd ]

Signed-off-by: Flora Cui flora.cui@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c | 31 ++++++++++--------- 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c index ca8091fd3a24f..018240a2ab96a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c @@ -111,8 +111,7 @@ #include "amdgpu_isp.h" #endif

-#define FIRMWARE_IP_DISCOVERY "amdgpu/ip_discovery.bin" -MODULE_FIRMWARE(FIRMWARE_IP_DISCOVERY); +MODULE_FIRMWARE("amdgpu/ip_discovery.bin");

#define mmIP_DISCOVERY_VERSION 0x16A00 #define mmRCC_CONFIG_MEMSIZE 0xde3 @@ -295,21 +294,13 @@ static int amdgpu_discovery_read_binary_from_mem(struct amdgpu_device *adev, return ret; }

-static int amdgpu_discovery_read_binary_from_file(struct amdgpu_device *adev, uint8_t *binary) +static int amdgpu_discovery_read_binary_from_file(struct amdgpu_device *adev, + uint8_t *binary, + const char *fw_name) { const struct firmware *fw; - const char *fw_name; int r;

- switch (amdgpu_discovery) { - case 2: - fw_name = FIRMWARE_IP_DISCOVERY; - break; - default: - dev_warn(adev->dev, "amdgpu_discovery is not set properly\n"); - return -EINVAL; - } - r = request_firmware(&fw, fw_name, adev->dev); if (r) { dev_err(adev->dev, "can't load firmware "%s"\n", @@ -402,10 +393,19 @@ static int amdgpu_discovery_verify_npsinfo(struct amdgpu_device *adev, return 0; }

+static const char *amdgpu_discovery_get_fw_name(struct amdgpu_device *adev) +{ + if (amdgpu_discovery == 2) + return "amdgpu/ip_discovery.bin"; + + return NULL; +} + static int amdgpu_discovery_init(struct amdgpu_device *adev) { struct table_info *info; struct binary_header *bhdr; + const char *fw_name; uint16_t offset; uint16_t size; uint16_t checksum; @@ -417,9 +417,10 @@ static int amdgpu_discovery_init(struct amdgpu_device *adev) return -ENOMEM;

/* Read from file if it is the preferred option */ - if (amdgpu_discovery == 2) { + fw_name = amdgpu_discovery_get_fw_name(adev); + if (fw_name != NULL) { dev_info(adev->dev, "use ip discovery information from file"); - r = amdgpu_discovery_read_binary_from_file(adev, adev->mman.discovery_bin); + r = amdgpu_discovery_read_binary_from_file(adev, adev->mman.discovery_bin, fw_name);

if (r) { dev_err(adev->dev, "failed to read ip discovery binary from file\n");

From: Roger Pau Monne roger.pau@citrix.com

[ Upstream commit 6c4d5aadf5df31ea0ac025980670eee9beaf466b ]

MSI remapping bypass (directly configuring MSI entries for devices on the VMD bus) won't work under Xen, as Xen is not aware of devices in such bus, and hence cannot configure the entries using the pIRQ interface in the PV case, and in the PVH case traps won't be setup for MSI entries for such devices.

Until Xen is aware of devices in the VMD bus prevent the VMD_FEAT_CAN_BYPASS_MSI_REMAP capability from being used when running as any kind of Xen guest.

The MSI remapping bypass is an optional feature of VMD bridges, and hence when running under Xen it will be masked and devices will be forced to redirect its interrupts from the VMD bridge. That mode of operation must always be supported by VMD bridges and works when Xen is not aware of devices behind the VMD bridge.

Signed-off-by: Roger Pau Monné roger.pau@citrix.com Acked-by: Bjorn Helgaas bhelgaas@google.com Message-ID: 20250219092059.90850-3-roger.pau@citrix.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/vmd.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)

diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index 94ceec50a2b94..8df064b62a2ff 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -17,6 +17,8 @@ #include <linux/rculist.h> #include <linux/rcupdate.h>

+#include <xen/xen.h> + #include <asm/irqdomain.h>

#define VMD_CFGBAR 0 @@ -970,6 +972,24 @@ static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id) struct vmd_dev *vmd; int err;

+ if (xen_domain()) { + /* + * Xen doesn't have knowledge about devices in the VMD bus + * because the config space of devices behind the VMD bridge is + * not known to Xen, and hence Xen cannot discover or configure + * them in any way. + * + * Bypass of MSI remapping won't work in that case as direct + * write by Linux to the MSI entries won't result in functional + * interrupts, as Xen is the entity that manages the host + * interrupt controller and must configure interrupts. However + * multiplexing of interrupts by the VMD bridge will work under + * Xen, so force the usage of that mode which must always be + * supported by VMD bridges. + */ + features &= ~VMD_FEAT_CAN_BYPASS_MSI_REMAP; + } + if (resource_size(&dev->resource[VMD_CFGBAR]) < (1 << 20)) return -ENOMEM;

From: Nicolas Bretz bretznic@gmail.com

[ Upstream commit d7b0befd09320e3356a75cb96541c030515e7f5f ]

A user complained that a message such as:

EXT4-fs (nvme0n1p3): re-mounted UUID ro. Quota mode: none.

implied that the file system was previously mounted read/write and was now remounted read-only, when it could have been some other mount state that had changed by the "mount -o remount" operation. Fix this by only logging "ro"or "r/w" when it has changed.

https://bugzilla.kernel.org/show_bug.cgi?id=219132

Signed-off-by: Nicolas Bretz bretznic@gmail.com Link: https://patch.msgid.link/20250319171011.8372-1-bretznic@gmail.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/super.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 4291ab3c20be6..473909c4a3784 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -6744,6 +6744,7 @@ static int ext4_reconfigure(struct fs_context *fc) { struct super_block *sb = fc->root->d_sb; int ret; + bool old_ro = sb_rdonly(sb);

fc->s_fs_info = EXT4_SB(sb);

@@ -6755,9 +6756,9 @@ static int ext4_reconfigure(struct fs_context *fc) if (ret < 0) return ret;

- ext4_msg(sb, KERN_INFO, "re-mounted %pU %s. Quota mode: %s.", - &sb->s_uuid, sb_rdonly(sb) ? "ro" : "r/w", - ext4_quota_mode(sb)); + ext4_msg(sb, KERN_INFO, "re-mounted %pU%s.", + &sb->s_uuid, + (old_ro != sb_rdonly(sb)) ? (sb_rdonly(sb) ? " ro" : " r/w") : "");

return 0; }

From: Christian Brauner brauner@kernel.org

[ Upstream commit 0fb482728ba1ee2130eaa461bf551f014447997c ]

This is another attempt trying to make pidfd polling for multi-threaded exec and premature thread-group leader exit consistent.

A quick recap of these two cases:

(1) During a multi-threaded exec by a subthread, i.e., non-thread-group leader thread, all other threads in the thread-group including the thread-group leader are killed and the struct pid of the thread-group leader will be taken over by the subthread that called exec. IOW, two tasks change their TIDs.

(2) A premature thread-group leader exit means that the thread-group leader exited before all of the other subthreads in the thread-group have exited.

Both cases lead to inconsistencies for pidfd polling with PIDFD_THREAD. Any caller that holds a PIDFD_THREAD pidfd to the current thread-group leader may or may not see an exit notification on the file descriptor depending on when poll is performed. If the poll is performed before the exec of the subthread has concluded an exit notification is generated for the old thread-group leader. If the poll is performed after the exec of the subthread has concluded no exit notification is generated for the old thread-group leader.

The correct behavior would be to simply not generate an exit notification on the struct pid of a subhthread exec because the struct pid is taken over by the subthread and thus remains alive.

But this is difficult to handle because a thread-group may exit prematurely as mentioned in (2). In that case an exit notification is reliably generated but the subthreads may continue to run for an indeterminate amount of time and thus also may exec at some point.

So far there was no way to distinguish between (1) and (2) internally. This tiny series tries to address this problem by discarding PIDFD_THREAD notification on premature thread-group leader exit.

If that works correctly then no exit notifications are generated for a PIDFD_THREAD pidfd for a thread-group leader until all subthreads have been reaped. If a subthread should exec aftewards no exit notification will be generated until that task exits or it creates subthreads and repeates the cycle.

Co-Developed-by: Oleg Nesterov oleg@redhat.com Signed-off-by: Oleg Nesterov oleg@redhat.com Link: https://lore.kernel.org/r/20250320-work-pidfs-thread_group-v4-1-da678ce805bf... Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/pidfs.c | 9 +++++---- kernel/exit.c | 6 +++--- kernel/signal.c | 3 +-- 3 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/fs/pidfs.c b/fs/pidfs.c index 80675b6bf8845..52b7e4f767327 100644 --- a/fs/pidfs.c +++ b/fs/pidfs.c @@ -95,20 +95,21 @@ static void pidfd_show_fdinfo(struct seq_file *m, struct file *f) static __poll_t pidfd_poll(struct file *file, struct poll_table_struct *pts) { struct pid *pid = pidfd_pid(file); - bool thread = file->f_flags & PIDFD_THREAD; struct task_struct *task; __poll_t poll_flags = 0;

poll_wait(file, &pid->wait_pidfd, pts); /* - * Depending on PIDFD_THREAD, inform pollers when the thread - * or the whole thread-group exits. + * Don't wake waiters if the thread-group leader exited + * prematurely. They either get notified when the last subthread + * exits or not at all if one of the remaining subthreads execs + * and assumes the struct pid of the old thread-group leader. */ guard(rcu)(); task = pid_task(pid, PIDTYPE_PID); if (!task) poll_flags = EPOLLIN | EPOLLRDNORM | EPOLLHUP; - else if (task->exit_state && (thread || thread_group_empty(task))) + else if (task->exit_state && !delay_group_leader(task)) poll_flags = EPOLLIN | EPOLLRDNORM;

return poll_flags; diff --git a/kernel/exit.c b/kernel/exit.c index 9d888f26bf784..c94d23ccd1520 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -745,10 +745,10 @@ static void exit_notify(struct task_struct *tsk, int group_dead)

tsk->exit_state = EXIT_ZOMBIE; /* - * sub-thread or delay_group_leader(), wake up the - * PIDFD_THREAD waiters. + * Ignore thread-group leaders that exited before all + * subthreads did. */ - if (!thread_group_empty(tsk)) + if (!delay_group_leader(tsk)) do_notify_pidfd(tsk);

if (unlikely(tsk->ptrace)) { diff --git a/kernel/signal.c b/kernel/signal.c index 2ae45e6eb6bb8..468b589c39e69 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -2063,8 +2063,7 @@ bool do_notify_parent(struct task_struct *tsk, int sig) WARN_ON_ONCE(!tsk->ptrace && (tsk->group_leader != tsk || !thread_group_empty(tsk))); /* - * tsk is a group leader and has no threads, wake up the - * non-PIDFD_THREAD waiters. + * Notify for thread-group leaders without subthreads. */ if (thread_group_empty(tsk)) do_notify_pidfd(tsk);

From: Erick Shepherd erick.shepherd@ni.com

[ Upstream commit 31e75ed964582257f59156ce6a42860e1ae4cc39 ]

The SD spec version 6.0 section 6.4.1.5 requires that Vdd must be lowered to less than 0.5V for a minimum of 1 ms when powering off a card. Increase wait to 15 ms so that voltage has time to drain down to 0.5V and cards can power off correctly. Issues with voltage drain time were only observed on Apollo Lake and Bay Trail host controllers so this fix is limited to those devices.

Signed-off-by: Erick Shepherd erick.shepherd@ni.com Acked-by: Adrian Hunter adrian.hunter@intel.com Link: https://lore.kernel.org/r/20250314195021.1588090-1-erick.shepherd@ni.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/sdhci-pci-core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 2e2e15e2d8fb8..b0b1d403f3527 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -609,8 +609,12 @@ static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,

sdhci_set_power(host, mode, vdd);

- if (mode == MMC_POWER_OFF) + if (mode == MMC_POWER_OFF) { + if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_APL_SD || + slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BYT_SD) + usleep_range(15000, 17500); return; + }

/* * Bus power might not enable after D3 -> D0 transition due to the

From: Eric Dumazet edumazet@google.com

[ Upstream commit 0efc297a3c4974dbd609ee36fc6345720b6ca735 ]

cgroup_rstat_flush_locked() grabs the irq safe cgroup_rstat_lock while iterating all possible cpus. It only drops the lock if there is scheduler or spin lock contention. If neither, then interrupts can be disabled for a long time. On large machines this can disable interrupts for a long enough time to drop network packets. On 400+ CPU machines I've seen interrupt disabled for over 40 msec.

Prevent rstat from disabling interrupts while processing all possible cpus. Instead drop and reacquire cgroup_rstat_lock for each cpu. This approach was previously discussed in https://lore.kernel.org/lkml/ZBz%2FV5a7%2F6PZeM7S@slm.duckdns.org/, though this was in the context of an non-irq rstat spin lock.

Benchmark this change with: 1) a single stat_reader process with 400 threads, each reading a test memcg's memory.stat repeatedly for 10 seconds. 2) 400 memory hog processes running in the test memcg and repeatedly charging memory until oom killed. Then they repeat charging and oom killing.

v6.14-rc6 with CONFIG_IRQSOFF_TRACER with stat_reader and hogs, finds interrupts are disabled by rstat for 45341 usec: # => started at: _raw_spin_lock_irq # => ended at: cgroup_rstat_flush # # # _------=> CPU# # / _-----=> irqs-off/BH-disabled # | / _----=> need-resched # || / _---=> hardirq/softirq # ||| / _--=> preempt-depth # |||| / _-=> migrate-disable # ||||| / delay # cmd pid |||||| time | caller # \ / |||||| \ | / stat_rea-96532 52d.... 0us*: _raw_spin_lock_irq stat_rea-96532 52d.... 45342us : cgroup_rstat_flush stat_rea-96532 52d.... 45342us : tracer_hardirqs_on <-cgroup_rstat_flush stat_rea-96532 52d.... 45343us : <stack trace> => memcg1_stat_format => memory_stat_format => memory_stat_show => seq_read_iter => vfs_read => ksys_read => do_syscall_64 => entry_SYSCALL_64_after_hwframe

With this patch the CONFIG_IRQSOFF_TRACER doesn't find rstat to be the longest holder. The longest irqs-off holder has irqs disabled for 4142 usec, a huge reduction from previous 45341 usec rstat finding.

Running stat_reader memory.stat reader for 10 seconds: - without memory hogs: 9.84M accesses => 12.7M accesses - with memory hogs: 9.46M accesses => 11.1M accesses The throughput of memory.stat access improves.

The mode of memory.stat access latency after grouping by of 2 buckets: - without memory hogs: 64 usec => 16 usec - with memory hogs: 64 usec => 8 usec The memory.stat latency improves.

Signed-off-by: Eric Dumazet edumazet@google.com Signed-off-by: Greg Thelen gthelen@google.com Tested-by: Greg Thelen gthelen@google.com Acked-by: Michal Koutný mkoutny@suse.com Reviewed-by: Yosry Ahmed yosry.ahmed@linux.dev Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/cgroup/rstat.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/kernel/cgroup/rstat.c b/kernel/cgroup/rstat.c index 3e01781aeb7bd..c4ce2f5a9745f 100644 --- a/kernel/cgroup/rstat.c +++ b/kernel/cgroup/rstat.c @@ -323,13 +323,11 @@ static void cgroup_rstat_flush_locked(struct cgroup *cgrp) rcu_read_unlock(); }

- /* play nice and yield if necessary */ - if (need_resched() || spin_needbreak(&cgroup_rstat_lock)) { - __cgroup_rstat_unlock(cgrp, cpu); - if (!cond_resched()) - cpu_relax(); - __cgroup_rstat_lock(cgrp, cpu); - } + /* play nice and avoid disabling interrupts for a long time */ + __cgroup_rstat_unlock(cgrp, cpu); + if (!cond_resched()) + cpu_relax(); + __cgroup_rstat_lock(cgrp, cpu); } }

From: Rex Lu rex.lu@mediatek.com

[ Upstream commit 8d38abdf6c182225c5c0a81451fa51b7b36a635d ]

The firmware needs a specific trigger when WED is being reset due to an ethernet reset condition. This helps prevent further L1 SER failure.

Signed-off-by: Rex Lu rex.lu@mediatek.com Link: https://patch.msgid.link/20250311103646.43346-2-nbd@nbd.name Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7996/mcu.h | 3 ++- drivers/net/wireless/mediatek/mt76/mt7996/mmio.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h index 43468bcaffc6d..a75e1c9435bb0 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h +++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h @@ -908,7 +908,8 @@ enum { UNI_CMD_SER_SET_RECOVER_L3_TX_DISABLE, UNI_CMD_SER_SET_RECOVER_L3_BF, UNI_CMD_SER_SET_RECOVER_L4_MDP, - UNI_CMD_SER_SET_RECOVER_FULL, + UNI_CMD_SER_SET_RECOVER_FROM_ETH, + UNI_CMD_SER_SET_RECOVER_FULL = 8, UNI_CMD_SER_SET_SYSTEM_ASSERT, /* action */ UNI_CMD_SER_ENABLE = 1, diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c b/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c index 442f72450352b..b6209ed1cfe01 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c +++ b/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c @@ -281,7 +281,7 @@ static int mt7996_mmio_wed_reset(struct mtk_wed_device *wed) if (test_and_set_bit(MT76_STATE_WED_RESET, &mphy->state)) return -EBUSY;

- ret = mt7996_mcu_set_ser(dev, UNI_CMD_SER_TRIGGER, UNI_CMD_SER_SET_RECOVER_L1, + ret = mt7996_mcu_set_ser(dev, UNI_CMD_SER_TRIGGER, UNI_CMD_SER_SET_RECOVER_FROM_ETH, mphy->band_idx); if (ret) goto out;

From: Ming Yen Hsieh mingyen.hsieh@mediatek.com

[ Upstream commit f2027ef3f733d3f0bb7f27fa3343784058f946ab ]

Read the EEPROM to determine the hardware type and uses this to load the correct CLC data.

Signed-off-by: Ming Yen Hsieh mingyen.hsieh@mediatek.com Link: https://patch.msgid.link/20250304113649.867387-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/wireless/mediatek/mt76/mt7925/mcu.c | 61 ++++++++++++++++++- .../wireless/mediatek/mt76/mt7925/mt7925.h | 3 + 2 files changed, 63 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c index 8476f9caa98db..5b14bf434df36 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c @@ -616,6 +616,54 @@ int mt7925_mcu_uni_rx_ba(struct mt792x_dev *dev, return ret; }

+static int mt7925_mcu_read_eeprom(struct mt792x_dev *dev, u32 offset, u8 *val) +{ + struct { + u8 rsv[4]; + + __le16 tag; + __le16 len; + + __le32 addr; + __le32 valid; + u8 data[MT7925_EEPROM_BLOCK_SIZE]; + } __packed req = { + .tag = cpu_to_le16(1), + .len = cpu_to_le16(sizeof(req) - 4), + .addr = cpu_to_le32(round_down(offset, + MT7925_EEPROM_BLOCK_SIZE)), + }; + struct evt { + u8 rsv[4]; + + __le16 tag; + __le16 len; + + __le32 ver; + __le32 addr; + __le32 valid; + __le32 size; + __le32 magic_num; + __le32 type; + __le32 rsv1[4]; + u8 data[32]; + } __packed *res; + struct sk_buff *skb; + int ret; + + ret = mt76_mcu_send_and_get_msg(&dev->mt76, MCU_WM_UNI_CMD_QUERY(EFUSE_CTRL), + &req, sizeof(req), true, &skb); + if (ret) + return ret; + + res = (struct evt *)skb->data; + *val = res->data[offset % MT7925_EEPROM_BLOCK_SIZE]; + + dev_kfree_skb(skb); + + return 0; +} + static int mt7925_load_clc(struct mt792x_dev *dev, const char *fw_name) { const struct mt76_connac2_fw_trailer *hdr; @@ -624,13 +672,20 @@ static int mt7925_load_clc(struct mt792x_dev *dev, const char *fw_name) struct mt76_dev *mdev = &dev->mt76; struct mt792x_phy *phy = &dev->phy; const struct firmware *fw; + u8 *clc_base = NULL, hw_encap = 0; int ret, i, len, offset = 0; - u8 *clc_base = NULL;

if (mt7925_disable_clc || mt76_is_usb(&dev->mt76)) return 0;

+ if (mt76_is_mmio(&dev->mt76)) { + ret = mt7925_mcu_read_eeprom(dev, MT_EE_HW_TYPE, &hw_encap); + if (ret) + return ret; + hw_encap = u8_get_bits(hw_encap, MT_EE_HW_TYPE_ENCAP); + } + ret = request_firmware(&fw, fw_name, mdev->dev); if (ret) return ret; @@ -675,6 +730,10 @@ static int mt7925_load_clc(struct mt792x_dev *dev, const char *fw_name) if (phy->clc[clc->idx]) continue;

+ /* header content sanity */ + if (u8_get_bits(clc->type, MT_EE_HW_TYPE_ENCAP) != hw_encap) + continue; + phy->clc[clc->idx] = devm_kmemdup(mdev->dev, clc, le32_to_cpu(clc->len), GFP_KERNEL); diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h b/drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h index df3c705d1cb3f..4ad779329b8f0 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h +++ b/drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h @@ -147,9 +147,12 @@ enum mt7925_eeprom_field { MT_EE_CHIP_ID = 0x000, MT_EE_VERSION = 0x002, MT_EE_MAC_ADDR = 0x004, + MT_EE_HW_TYPE = 0xa71, __MT_EE_MAX = 0x9ff };

+#define MT_EE_HW_TYPE_ENCAP GENMASK(1, 0) + enum { TXPWR_USER, TXPWR_EEPROM,

From: Thomas Huth thuth@redhat.com

[ Upstream commit 8a141be3233af7d4f7014ebc44d5452d46b2b1be ]

__ASSEMBLY__ is only defined by the Makefile of the kernel, so this is not really useful for UAPI headers (unless the userspace Makefile defines it, too). Let's switch to __ASSEMBLER__ which gets set automatically by the compiler when compiling assembly code.

Signed-off-by: Thomas Huth thuth@redhat.com Signed-off-by: Ingo Molnar mingo@kernel.org Cc: "H. Peter Anvin" hpa@zytor.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Kees Cook keescook@chromium.org Cc: Brian Gerst brgerst@gmail.com Link: https://lore.kernel.org/r/20250310104256.123527-1-thuth@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/uapi/asm/bootparam.h | 4 ++-- arch/x86/include/uapi/asm/e820.h | 4 ++-- arch/x86/include/uapi/asm/ldt.h | 4 ++-- arch/x86/include/uapi/asm/msr.h | 4 ++-- arch/x86/include/uapi/asm/ptrace-abi.h | 6 +++--- arch/x86/include/uapi/asm/ptrace.h | 4 ++-- arch/x86/include/uapi/asm/setup_data.h | 4 ++-- arch/x86/include/uapi/asm/signal.h | 8 ++++---- 8 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h index 9b82eebd7add5..dafbf581c515d 100644 --- a/arch/x86/include/uapi/asm/bootparam.h +++ b/arch/x86/include/uapi/asm/bootparam.h @@ -26,7 +26,7 @@ #define XLF_5LEVEL_ENABLED (1<<6) #define XLF_MEM_ENCRYPTION (1<<7)

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__

#include <linux/types.h> #include <linux/screen_info.h> @@ -210,6 +210,6 @@ enum x86_hardware_subarch { X86_NR_SUBARCHS, };

-#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */

#endif /* _ASM_X86_BOOTPARAM_H */ diff --git a/arch/x86/include/uapi/asm/e820.h b/arch/x86/include/uapi/asm/e820.h index 2f491efe3a126..55bc668671560 100644 --- a/arch/x86/include/uapi/asm/e820.h +++ b/arch/x86/include/uapi/asm/e820.h @@ -54,7 +54,7 @@ */ #define E820_RESERVED_KERN 128

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ #include <linux/types.h> struct e820entry { __u64 addr; /* start of memory segment */ @@ -76,7 +76,7 @@ struct e820map { #define BIOS_ROM_BASE 0xffe00000 #define BIOS_ROM_END 0xffffffff

-#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */

#endif /* _UAPI_ASM_X86_E820_H */ diff --git a/arch/x86/include/uapi/asm/ldt.h b/arch/x86/include/uapi/asm/ldt.h index d62ac5db093b4..a82c039d8e6a7 100644 --- a/arch/x86/include/uapi/asm/ldt.h +++ b/arch/x86/include/uapi/asm/ldt.h @@ -12,7 +12,7 @@ /* The size of each LDT entry. */ #define LDT_ENTRY_SIZE 8

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ /* * Note on 64bit base and limit is ignored and you cannot set DS/ES/CS * not to the default values if you still want to do syscalls. This @@ -44,5 +44,5 @@ struct user_desc { #define MODIFY_LDT_CONTENTS_STACK 1 #define MODIFY_LDT_CONTENTS_CODE 2

-#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_LDT_H */ diff --git a/arch/x86/include/uapi/asm/msr.h b/arch/x86/include/uapi/asm/msr.h index e7516b402a00f..4b8917ca28fe7 100644 --- a/arch/x86/include/uapi/asm/msr.h +++ b/arch/x86/include/uapi/asm/msr.h @@ -2,7 +2,7 @@ #ifndef _UAPI_ASM_X86_MSR_H #define _UAPI_ASM_X86_MSR_H

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__

#include <linux/types.h> #include <linux/ioctl.h> @@ -10,5 +10,5 @@ #define X86_IOC_RDMSR_REGS _IOWR('c', 0xA0, __u32[8]) #define X86_IOC_WRMSR_REGS _IOWR('c', 0xA1, __u32[8])

-#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _UAPI_ASM_X86_MSR_H */ diff --git a/arch/x86/include/uapi/asm/ptrace-abi.h b/arch/x86/include/uapi/asm/ptrace-abi.h index 16074b9c93bb5..5823584dea132 100644 --- a/arch/x86/include/uapi/asm/ptrace-abi.h +++ b/arch/x86/include/uapi/asm/ptrace-abi.h @@ -25,7 +25,7 @@

#else /* __i386__ */

-#if defined(__ASSEMBLY__) || defined(__FRAME_OFFSETS) +#if defined(__ASSEMBLER__) || defined(__FRAME_OFFSETS) /* * C ABI says these regs are callee-preserved. They aren't saved on kernel entry * unless syscall needs a complete, fully filled "struct pt_regs". @@ -57,7 +57,7 @@ #define EFLAGS 144 #define RSP 152 #define SS 160 -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */

/* top of stack page */ #define FRAME_SIZE 168 @@ -87,7 +87,7 @@

#define PTRACE_SINGLEBLOCK 33 /* resume execution until next branch */

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ #include <linux/types.h> #endif

diff --git a/arch/x86/include/uapi/asm/ptrace.h b/arch/x86/include/uapi/asm/ptrace.h index 85165c0edafc8..e0b5b4f6226b1 100644 --- a/arch/x86/include/uapi/asm/ptrace.h +++ b/arch/x86/include/uapi/asm/ptrace.h @@ -7,7 +7,7 @@ #include <asm/processor-flags.h>

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__

#ifdef __i386__ /* this struct defines the way the registers are stored on the @@ -81,6 +81,6 @@ struct pt_regs {

-#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */

#endif /* _UAPI_ASM_X86_PTRACE_H */ diff --git a/arch/x86/include/uapi/asm/setup_data.h b/arch/x86/include/uapi/asm/setup_data.h index b111b0c185449..50c45ead4e7c9 100644 --- a/arch/x86/include/uapi/asm/setup_data.h +++ b/arch/x86/include/uapi/asm/setup_data.h @@ -18,7 +18,7 @@ #define SETUP_INDIRECT (1<<31) #define SETUP_TYPE_MAX (SETUP_ENUM_MAX | SETUP_INDIRECT)

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__

#include <linux/types.h>

@@ -78,6 +78,6 @@ struct ima_setup_data { __u64 size; } __attribute__((packed));

-#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */

#endif /* _UAPI_ASM_X86_SETUP_DATA_H */ diff --git a/arch/x86/include/uapi/asm/signal.h b/arch/x86/include/uapi/asm/signal.h index f777346450ec3..1067efabf18b5 100644 --- a/arch/x86/include/uapi/asm/signal.h +++ b/arch/x86/include/uapi/asm/signal.h @@ -2,7 +2,7 @@ #ifndef _UAPI_ASM_X86_SIGNAL_H #define _UAPI_ASM_X86_SIGNAL_H

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ #include <linux/types.h> #include <linux/compiler.h>

@@ -16,7 +16,7 @@ struct siginfo; typedef unsigned long sigset_t;

#endif /* __KERNEL__ */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */

#define SIGHUP 1 @@ -68,7 +68,7 @@ typedef unsigned long sigset_t;

#include <asm-generic/signal-defs.h>

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__

# ifndef __KERNEL__ @@ -106,6 +106,6 @@ typedef struct sigaltstack { __kernel_size_t ss_size; } stack_t;

-#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */

#endif /* _UAPI_ASM_X86_SIGNAL_H */

From: Sohil Mehta sohil.mehta@intel.com

[ Upstream commit 7a2ad752746bfb13e89a83984ecc52a48bae4969 ]

Some old crusty CPUs need an extra delay that slows down booting. See the comment above 'init_udelay' for details. Newer CPUs don't need the delay.

Right now, for Intel, Family 6 and only Family 6 skips the delay. That leaves out both the Family 15 (Pentium 4s) and brand new Family 18/19 models.

The omission of Family 15 (Pentium 4s) seems like an oversight and 18/19 do not need the delay.

Skip the delay on all Intel processors Family 6 and beyond.

Signed-off-by: Sohil Mehta sohil.mehta@intel.com Signed-off-by: Ingo Molnar mingo@kernel.org Link: https://lore.kernel.org/r/20250219184133.816753-11-sohil.mehta@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/smpboot.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index f1fac08fdef28..2c451de702c87 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -681,9 +681,9 @@ static void __init smp_quirk_init_udelay(void) return;

/* if modern processor, use no delay */ - if (((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 6)) || - ((boot_cpu_data.x86_vendor == X86_VENDOR_HYGON) && (boot_cpu_data.x86 >= 0x18)) || - ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && (boot_cpu_data.x86 >= 0xF))) { + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && boot_cpu_data.x86_vfm >= INTEL_PENTIUM_PRO) || + (boot_cpu_data.x86_vendor == X86_VENDOR_HYGON && boot_cpu_data.x86 >= 0x18) || + (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && boot_cpu_data.x86 >= 0xF)) { init_udelay = 0; return; }

From: Philip Redkin me@rarity.fan

[ Upstream commit 631ca8909fd5c62b9fda9edda93924311a78a9c4 ]

At least with CONFIG_PHYSICAL_START=0x100000, if there is < 4 MiB of contiguous free memory available at this point, the kernel will crash and burn because memblock_phys_alloc_range() returns 0 on failure, which leads memblock_phys_free() to throw the first 4 MiB of physical memory to the wolves.

At a minimum it should fail gracefully with a meaningful diagnostic, but in fact everything seems to work fine without the weird reserve allocation.

Signed-off-by: Philip Redkin me@rarity.fan Signed-off-by: Ingo Molnar mingo@kernel.org Cc: Dave Hansen dave.hansen@linux.intel.com Cc: Rik van Riel riel@surriel.com Cc: "H. Peter Anvin" hpa@zytor.com Link: https://lore.kernel.org/r/94b3e98f-96a7-3560-1f76-349eb95ccf7f@rarity.fan Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/mm/init.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 101725c149c42..9cbc1e6057d3c 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -645,8 +645,13 @@ static void __init memory_map_top_down(unsigned long map_start, */ addr = memblock_phys_alloc_range(PMD_SIZE, PMD_SIZE, map_start, map_end); - memblock_phys_free(addr, PMD_SIZE); - real_end = addr + PMD_SIZE; + if (!addr) { + pr_warn("Failed to release memory for alloc_low_pages()"); + real_end = max(map_start, ALIGN_DOWN(map_end, PMD_SIZE)); + } else { + memblock_phys_free(addr, PMD_SIZE); + real_end = addr + PMD_SIZE; + }

/* step_size need to be small so pgt_buf from BRK could cover it */ step_size = PMD_SIZE;

From: Vitalii Mordan mordan@ispras.ru

[ Upstream commit be7113d2e2a6f20cbee99c98d261a1fd6fd7b549 ]

If the clock i2c->clk was not enabled in i2c_pxa_probe(), it should not be disabled in any path.

Found by Linux Verification Center (linuxtesting.org) with Klever.

Signed-off-by: Vitalii Mordan mordan@ispras.ru Signed-off-by: Andi Shyti andi.shyti@kernel.org Link: https://lore.kernel.org/r/20250212172803.1422136-1-mordan@ispras.ru Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-pxa.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 4d76e71cdd4be..afc1a8171f59e 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1503,7 +1503,10 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.name); }

- clk_prepare_enable(i2c->clk); + ret = clk_prepare_enable(i2c->clk); + if (ret) + return dev_err_probe(&dev->dev, ret, + "failed to enable clock\n");

if (i2c->use_pio) { i2c->adap.algo = &i2c_pxa_pio_algorithm;

From: Mark Harmstone maharmstone@fb.com

[ Upstream commit 7ef3cbf17d2734ca66c4ed8573be45f4e461e7ee ]

The inline function btrfs_is_testing() is hardcoded to return 0 if CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set. Currently we're relying on the compiler optimizing out the call to alloc_test_extent_buffer() in btrfs_find_create_tree_block(), as it's not been defined (it's behind an #ifdef).

Add a stub version of alloc_test_extent_buffer() to avoid linker errors on non-standard optimization levels. This problem was seen on GCC 14 with -O0 and is helps to see symbols that would be otherwise optimized out.

Reviewed-by: Qu Wenruo wqu@suse.com Signed-off-by: Mark Harmstone maharmstone@fb.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/extent_io.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 6551fb003eed2..b134cb324dab8 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2826,10 +2826,10 @@ struct extent_buffer *find_extent_buffer(struct btrfs_fs_info *fs_info, return eb; }

-#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS struct extent_buffer *alloc_test_extent_buffer(struct btrfs_fs_info *fs_info, u64 start) { +#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS struct extent_buffer *eb, *exists = NULL; int ret;

@@ -2865,8 +2865,11 @@ struct extent_buffer *alloc_test_extent_buffer(struct btrfs_fs_info *fs_info, free_eb: btrfs_release_extent_buffer(eb); return exists; -} +#else + /* Stub to avoid linker error when compiled with optimizations turned off. */ + return NULL; #endif +}

static struct extent_buffer *grab_extent_buffer( struct btrfs_fs_info *fs_info, struct page *page)

From: Filipe Manana fdmanana@suse.com

[ Upstream commit cda76788f8b0f7de3171100e3164ec1ce702292e ]

At close_ctree() after we have ran delayed iputs either explicitly through calling btrfs_run_delayed_iputs() or later during the call to btrfs_commit_super() or btrfs_error_commit_super(), we assert that the delayed iputs list is empty.

We have (another) race where this assertion might fail because we have queued an async write into the fs_info->workers workqueue. Here's how it happens:

1) We are submitting a data bio for an inode that is not the data relocation inode, so we call btrfs_wq_submit_bio();

2) btrfs_wq_submit_bio() submits a work for the fs_info->workers queue that will run run_one_async_done();

3) We enter close_ctree(), flush several work queues except fs_info->workers, explicitly run delayed iputs with a call to btrfs_run_delayed_iputs() and then again shortly after by calling btrfs_commit_super() or btrfs_error_commit_super(), which also run delayed iputs;

4) run_one_async_done() is executed in the work queue, and because there was an IO error (bio->bi_status is not 0) it calls btrfs_bio_end_io(), which drops the final reference on the associated ordered extent by calling btrfs_put_ordered_extent() - and that adds a delayed iput for the inode;

5) At close_ctree() we find that after stopping the cleaner and transaction kthreads the delayed iputs list is not empty, failing the following assertion:

ASSERT(list_empty(&fs_info->delayed_iputs));

Fix this by flushing the fs_info->workers workqueue before running delayed iputs at close_ctree().

David reported this when running generic/648, which exercises IO error paths by using the DM error table.

Reported-by: David Sterba dsterba@suse.com Reviewed-by: Qu Wenruo wqu@suse.com Signed-off-by: Filipe Manana fdmanana@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/disk-io.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index e0e740e4d7c75..147c50ef912ac 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -4282,6 +4282,19 @@ void __cold close_ctree(struct btrfs_fs_info *fs_info) */ btrfs_flush_workqueue(fs_info->delalloc_workers);

+ /* + * We can have ordered extents getting their last reference dropped from + * the fs_info->workers queue because for async writes for data bios we + * queue a work for that queue, at btrfs_wq_submit_bio(), that runs + * run_one_async_done() which calls btrfs_bio_end_io() in case the bio + * has an error, and that later function can do the final + * btrfs_put_ordered_extent() on the ordered extent attached to the bio, + * which adds a delayed iput for the inode. So we must flush the queue + * so that we don't have delayed iputs after committing the current + * transaction below and stopping the cleaner and transaction kthreads. + */ + btrfs_flush_workqueue(fs_info->workers); + /* * When finishing a compressed write bio we schedule a work queue item * to finish an ordered extent - btrfs_finish_compressed_write_work()

From: Qu Wenruo wqu@suse.com

[ Upstream commit 1a5b5668d711d3d1ef447446beab920826decec3 ]

Currently reading an inline data extent will zero out the remaining range in the page.

This is not yet causing problems even for block size < page size (subpage) cases because:

1) An inline data extent always starts at file offset 0 Meaning at page read, we always read the inline extent first, before any other blocks in the page. Then later blocks are properly read out and re-fill the zeroed out ranges.

2) Currently btrfs will read out the whole page if a buffered write is not page aligned So a page is either fully uptodate at buffered write time (covers the whole page), or we will read out the whole page first. Meaning there is nothing to lose for such an inline extent read.

But it's still not ideal:

- We're zeroing out the page twice Once done by read_inline_extent()/uncompress_inline(), once done by btrfs_do_readpage() for ranges beyond i_size.

- We're touching blocks that don't belong to the inline extent In the incoming patches, we can have a partial uptodate folio, of which some dirty blocks can exist while the page is not fully uptodate:

The page size is 16K and block size is 4K:

0 4K 8K 12K 16K | | |/////////| |

And range [8K, 12K) is dirtied by a buffered write, the remaining blocks are not uptodate.

If range [0, 4K) contains an inline data extent, and we try to read the whole page, the current behavior will overwrite range [8K, 12K) with zero and cause data loss.

So to make the behavior more consistent and in preparation for future changes, limit the inline data extents read to only zero out the range inside the first block, not the whole page.

Reviewed-by: Filipe Manana fdmanana@suse.com Signed-off-by: Qu Wenruo wqu@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/inode.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 3dee0565ad21a..19ed56d3638dc 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6817,6 +6817,7 @@ static noinline int uncompress_inline(struct btrfs_path *path, { int ret; struct extent_buffer *leaf = path->nodes[0]; + const u32 blocksize = leaf->fs_info->sectorsize; char *tmp; size_t max_size; unsigned long inline_size; @@ -6833,7 +6834,7 @@ static noinline int uncompress_inline(struct btrfs_path *path,

read_extent_buffer(leaf, tmp, ptr, inline_size);

- max_size = min_t(unsigned long, PAGE_SIZE, max_size); + max_size = min_t(unsigned long, blocksize, max_size); ret = btrfs_decompress(compress_type, tmp, folio, 0, inline_size, max_size);

@@ -6845,8 +6846,8 @@ static noinline int uncompress_inline(struct btrfs_path *path, * cover that region here. */

- if (max_size < PAGE_SIZE) - folio_zero_range(folio, max_size, PAGE_SIZE - max_size); + if (max_size < blocksize) + folio_zero_range(folio, max_size, blocksize - max_size); kfree(tmp); return ret; } @@ -6854,6 +6855,7 @@ static noinline int uncompress_inline(struct btrfs_path *path, static int read_inline_extent(struct btrfs_inode *inode, struct btrfs_path *path, struct folio *folio) { + const u32 blocksize = path->nodes[0]->fs_info->sectorsize; struct btrfs_file_extent_item *fi; void *kaddr; size_t copy_size; @@ -6868,14 +6870,14 @@ static int read_inline_extent(struct btrfs_inode *inode, struct btrfs_path *path if (btrfs_file_extent_compression(path->nodes[0], fi) != BTRFS_COMPRESS_NONE) return uncompress_inline(path, folio, fi);

- copy_size = min_t(u64, PAGE_SIZE, + copy_size = min_t(u64, blocksize, btrfs_file_extent_ram_bytes(path->nodes[0], fi)); kaddr = kmap_local_folio(folio, 0); read_extent_buffer(path->nodes[0], kaddr, btrfs_file_extent_inline_start(fi), copy_size); kunmap_local(kaddr); - if (copy_size < PAGE_SIZE) - folio_zero_range(folio, copy_size, PAGE_SIZE - copy_size); + if (copy_size < blocksize) + folio_zero_range(folio, copy_size, blocksize - copy_size); return 0; }

From: Filipe Manana fdmanana@suse.com

[ Upstream commit a77749b3e21813566cea050bbb3414ae74562eba ]

When attempting to build a too long path we are currently returning -ENOMEM, which is very odd and misleading. So update fs_path_ensure_buf() to return -ENAMETOOLONG instead. Also, while at it, move the WARN_ON() into the if statement's expression, as it makes it clear what is being tested and also has the effect of adding 'unlikely' to the statement, which allows the compiler to generate better code as this condition is never expected to happen.

Signed-off-by: Filipe Manana fdmanana@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/send.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index b1015f383f75e..c843b4aefb8ac 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -487,10 +487,8 @@ static int fs_path_ensure_buf(struct fs_path *p, int len) if (p->buf_len >= len) return 0;

- if (len > PATH_MAX) { - WARN_ON(1); - return -ENOMEM; - } + if (WARN_ON(len > PATH_MAX)) + return -ENAMETOOLONG;

path_len = p->end - p->start; old_buf_len = p->buf_len;

From: Chen Linxuan chenlinxuan@uniontech.com

[ Upstream commit e1a0202c6bfda24002a3ae2115154fa90104c649 ]

This patch improve the returned error code of blkcg_policy_register().

1. Move the validation check for cpd/pd_alloc_fn and cpd/pd_free_fn function pairs to the start of blkcg_policy_register(). This ensures we immediately return -EINVAL if the function pairs are not correctly provided, rather than returning -ENOSPC after locking and unlocking mutexes unnecessarily.

Those locks should not contention any problems, as error of policy registration is a super cold path.

2. Return -ENOMEM when cpd_alloc_fn() failed.

Co-authored-by: Wen Tao wentao@uniontech.com Signed-off-by: Wen Tao wentao@uniontech.com Signed-off-by: Chen Linxuan chenlinxuan@uniontech.com Reviewed-by: Michal Koutný mkoutny@suse.com Acked-by: Tejun Heo tj@kernel.org Reviewed-by: Yu Kuai yukuai3@huawei.com Link: https://lore.kernel.org/r/3E333A73B6B6DFC0+20250317022924.150907-1-chenlinxu... Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-cgroup.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index f1cf7f2909f3a..643d6bf66522e 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -1725,27 +1725,27 @@ int blkcg_policy_register(struct blkcg_policy *pol) struct blkcg *blkcg; int i, ret;

+ /* + * Make sure cpd/pd_alloc_fn and cpd/pd_free_fn in pairs, and policy + * without pd_alloc_fn/pd_free_fn can't be activated. + */ + if ((!pol->cpd_alloc_fn ^ !pol->cpd_free_fn) || + (!pol->pd_alloc_fn ^ !pol->pd_free_fn)) + return -EINVAL; + mutex_lock(&blkcg_pol_register_mutex); mutex_lock(&blkcg_pol_mutex);

/* find an empty slot */ - ret = -ENOSPC; for (i = 0; i < BLKCG_MAX_POLS; i++) if (!blkcg_policy[i]) break; if (i >= BLKCG_MAX_POLS) { pr_warn("blkcg_policy_register: BLKCG_MAX_POLS too small\n"); + ret = -ENOSPC; goto err_unlock; }

- /* - * Make sure cpd/pd_alloc_fn and cpd/pd_free_fn in pairs, and policy - * without pd_alloc_fn/pd_free_fn can't be activated. - */ - if ((!pol->cpd_alloc_fn ^ !pol->cpd_free_fn) || - (!pol->pd_alloc_fn ^ !pol->pd_free_fn)) - goto err_unlock; - /* register @pol */ pol->plid = i; blkcg_policy[pol->plid] = pol; @@ -1756,8 +1756,10 @@ int blkcg_policy_register(struct blkcg_policy *pol) struct blkcg_policy_data *cpd;

cpd = pol->cpd_alloc_fn(GFP_KERNEL); - if (!cpd) + if (!cpd) { + ret = -ENOMEM; goto err_free_cpds; + }

blkcg->cpd[pol->plid] = cpd; cpd->blkcg = blkcg;

From: Jing Zhou Jing.Zhou@amd.com

[ Upstream commit 9c2f4ae64bb6f6d83a54d88b9ee0f369cdbb9fa8 ]

[WHY] We should never apply a minimum dispclk value while in prepare_bandwidth or while displays are active. This is always an optimizaiton for when all displays are disabled.

[HOW] Defer dispclk optimization until safe_to_lower = true and display_count reaches 0.

Since 0 has a special value in this logic (ie. no dispclk required) we also need adjust the logic that clamps it for the actual request to PMFW.

Reviewed-by: Charlene Liu charlene.liu@amd.com Reviewed-by: Chris Park chris.park@amd.com Reviewed-by: Eric Yang eric.yang@amd.com Signed-off-by: Jing Zhou Jing.Zhou@amd.com Signed-off-by: Nicholas Kazlauskas nicholas.kazlauskas@amd.com Signed-off-by: Alex Hung alex.hung@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../dc/clk_mgr/dcn315/dcn315_clk_mgr.c | 20 +++++++++++-------- .../dc/clk_mgr/dcn316/dcn316_clk_mgr.c | 13 +++++++++--- 2 files changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c index a0fb4481d2f1b..827b24b3442ad 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c @@ -130,7 +130,7 @@ static void dcn315_update_clocks(struct clk_mgr *clk_mgr_base, struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base); struct dc_clocks *new_clocks = &context->bw_ctx.bw.dcn.clk; struct dc *dc = clk_mgr_base->ctx->dc; - int display_count; + int display_count = 0; bool update_dppclk = false; bool update_dispclk = false; bool dpp_clock_lowered = false; @@ -204,15 +204,19 @@ static void dcn315_update_clocks(struct clk_mgr *clk_mgr_base, update_dppclk = true; }

- if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz)) { - /* No need to apply the w/a if we haven't taken over from bios yet */ - if (clk_mgr_base->clks.dispclk_khz) - dcn315_disable_otg_wa(clk_mgr_base, context, true); + if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) && + (new_clocks->dispclk_khz > 0 || (safe_to_lower && display_count == 0))) { + int requested_dispclk_khz = new_clocks->dispclk_khz;

+ dcn315_disable_otg_wa(clk_mgr_base, context, true); + + /* Clamp the requested clock to PMFW based on their limit. */ + if (dc->debug.min_disp_clk_khz > 0 && requested_dispclk_khz < dc->debug.min_disp_clk_khz) + requested_dispclk_khz = dc->debug.min_disp_clk_khz; + + dcn315_smu_set_dispclk(clk_mgr, requested_dispclk_khz); clk_mgr_base->clks.dispclk_khz = new_clocks->dispclk_khz; - dcn315_smu_set_dispclk(clk_mgr, clk_mgr_base->clks.dispclk_khz); - if (clk_mgr_base->clks.dispclk_khz) - dcn315_disable_otg_wa(clk_mgr_base, context, false); + dcn315_disable_otg_wa(clk_mgr_base, context, false);

update_dispclk = true; } diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c index c3e50c3aaa609..37c39756fece4 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c @@ -140,7 +140,7 @@ static void dcn316_update_clocks(struct clk_mgr *clk_mgr_base, struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base); struct dc_clocks *new_clocks = &context->bw_ctx.bw.dcn.clk; struct dc *dc = clk_mgr_base->ctx->dc; - int display_count; + int display_count = 0; bool update_dppclk = false; bool update_dispclk = false; bool dpp_clock_lowered = false; @@ -211,11 +211,18 @@ static void dcn316_update_clocks(struct clk_mgr *clk_mgr_base, update_dppclk = true; }

- if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz)) { + if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) && + (new_clocks->dispclk_khz > 0 || (safe_to_lower && display_count == 0))) { + int requested_dispclk_khz = new_clocks->dispclk_khz; + dcn316_disable_otg_wa(clk_mgr_base, context, safe_to_lower, true);

+ /* Clamp the requested clock to PMFW based on their limit. */ + if (dc->debug.min_disp_clk_khz > 0 && requested_dispclk_khz < dc->debug.min_disp_clk_khz) + requested_dispclk_khz = dc->debug.min_disp_clk_khz; + + dcn316_smu_set_dispclk(clk_mgr, requested_dispclk_khz); clk_mgr_base->clks.dispclk_khz = new_clocks->dispclk_khz; - dcn316_smu_set_dispclk(clk_mgr, clk_mgr_base->clks.dispclk_khz); dcn316_disable_otg_wa(clk_mgr_base, context, safe_to_lower, false);

update_dispclk = true;

From: Stanley Chu yschu@nuvoton.com

[ Upstream commit 0430bf9bc1ac068c8b8c540eb93e5751872efc51 ]

The controller driver nacked the master request but didn't emit a STOP to end the transaction. The driver shall refuse the unsupported requests and return the controller state to IDLE by emitting a STOP.

Signed-off-by: Stanley Chu yschu@nuvoton.com Reviewed-by: Frank Li Frank.Li@nxp.com Link: https://lore.kernel.org/r/20250318053606.3087121-4-yschu@nuvoton.com Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i3c/master/svc-i3c-master.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c index 7911814ad82ac..6ffe022dbb5b4 100644 --- a/drivers/i3c/master/svc-i3c-master.c +++ b/drivers/i3c/master/svc-i3c-master.c @@ -511,6 +511,7 @@ static void svc_i3c_master_ibi_work(struct work_struct *work) queue_work(master->base.wq, &master->hj_work); break; case SVC_I3C_MSTATUS_IBITYPE_MASTER_REQUEST: + svc_i3c_master_emit_stop(master); default: break; }

From: Heming Zhao heming.zhao@suse.com

[ Upstream commit 03d2b62208a336a3bb984b9465ef6d89a046ea22 ]

This patch bypasses multi-link errors in TCP mode, allowing dlm to operate on the first tcp link.

Signed-off-by: Heming Zhao heming.zhao@suse.com Signed-off-by: David Teigland teigland@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/dlm/lowcomms.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c index f2d88a3581695..10461451185e8 100644 --- a/fs/dlm/lowcomms.c +++ b/fs/dlm/lowcomms.c @@ -1826,8 +1826,8 @@ static int dlm_tcp_listen_validate(void) { /* We don't support multi-homed hosts */ if (dlm_local_count > 1) { - log_print("TCP protocol can't handle multi-homed hosts, try SCTP"); - return -EINVAL; + log_print("Detect multi-homed hosts but use only the first IP address."); + log_print("Try SCTP, if you want to enable multi-link."); }

return 0;

From: Benjamin Berg benjamin@sipsolutions.net

[ Upstream commit cef721e0d53d2b64f2ba177c63a0dfdd7c0daf17 ]

Doing this allows using registers as retrieved from an mcontext to be pushed to a process using PTRACE_SETREGS.

It is not entirely clear to me why CSGSFS was masked. Doing so creates issues when using the mcontext as process state in seccomp and simply copying the register appears to work perfectly fine for ptrace.

Signed-off-by: Benjamin Berg benjamin@sipsolutions.net Link: https://patch.msgid.link/20250224181827.647129-2-benjamin@sipsolutions.net Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/um/os-Linux/mcontext.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/x86/um/os-Linux/mcontext.c b/arch/x86/um/os-Linux/mcontext.c index e80ab7d281177..1b0d95328b2c7 100644 --- a/arch/x86/um/os-Linux/mcontext.c +++ b/arch/x86/um/os-Linux/mcontext.c @@ -27,7 +27,6 @@ void get_regs_from_mc(struct uml_pt_regs *regs, mcontext_t *mc) COPY(RIP); COPY2(EFLAGS, EFL); COPY2(CS, CSGSFS); - regs->gp[CS / sizeof(unsigned long)] &= 0xffff; - regs->gp[CS / sizeof(unsigned long)] |= 3; + regs->gp[SS / sizeof(unsigned long)] = mc->gregs[REG_CSGSFS] >> 48; #endif }

From: Jeff Chen jeff.chen_1@nxp.com

[ Upstream commit 4fcfcbe457349267fe048524078e8970807c1a5b ]

This patch addresses an issue where, despite the AP supporting 40MHz bandwidth, the connection was limited to 20MHz. Without this fix, even if the access point supports 40MHz, the bandwidth after connection remains at 20MHz. This issue is not a regression.

Signed-off-by: Jeff Chen jeff.chen_1@nxp.com Reviewed-by: Francesco Dolcini francesco.dolcini@toradex.com Link: https://patch.msgid.link/20250314094238.2097341-1-jeff.chen_1@nxp.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/marvell/mwifiex/11n.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/11n.c b/drivers/net/wireless/marvell/mwifiex/11n.c index 66f0f5377ac18..738bafc3749b0 100644 --- a/drivers/net/wireless/marvell/mwifiex/11n.c +++ b/drivers/net/wireless/marvell/mwifiex/11n.c @@ -403,12 +403,14 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,

if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 && bss_desc->bcn_ht_oper->ht_param & - IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) + IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) { + chan_list->chan_scan_param[0].radio_type |= + CHAN_BW_40MHZ << 2; SET_SECONDARYCHAN(chan_list->chan_scan_param[0]. radio_type, (bss_desc->bcn_ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET)); - + } *buffer += struct_size(chan_list, chan_scan_param, 1); ret_len += struct_size(chan_list, chan_scan_param, 1); }

From: Alexandre Ghiti alexghiti@rivosinc.com

[ Upstream commit d9be2b9b60497a82aeceec3a98d8b37fdd2960f2 ]

This is required to allow the IOMMU driver to correctly flush its own TLB.

Reviewed-by: Clément Léger cleger@rivosinc.com Reviewed-by: Samuel Holland samuel.holland@sifive.com Link: https://lore.kernel.org/r/20250113142424.30487-1-alexghiti@rivosinc.com Signed-off-by: Alexandre Ghiti alexghiti@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/mm/tlbflush.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-)

diff --git a/arch/riscv/mm/tlbflush.c b/arch/riscv/mm/tlbflush.c index 9b6e86ce38674..bb77607c87aa2 100644 --- a/arch/riscv/mm/tlbflush.c +++ b/arch/riscv/mm/tlbflush.c @@ -4,6 +4,7 @@ #include <linux/smp.h> #include <linux/sched.h> #include <linux/hugetlb.h> +#include <linux/mmu_notifier.h> #include <asm/sbi.h> #include <asm/mmu_context.h>

@@ -78,10 +79,17 @@ static void __ipi_flush_tlb_range_asid(void *info) local_flush_tlb_range_asid(d->start, d->size, d->stride, d->asid); }

-static void __flush_tlb_range(const struct cpumask *cmask, unsigned long asid, +static inline unsigned long get_mm_asid(struct mm_struct *mm) +{ + return mm ? cntx2asid(atomic_long_read(&mm->context.id)) : FLUSH_TLB_NO_ASID; +} + +static void __flush_tlb_range(struct mm_struct *mm, + const struct cpumask *cmask, unsigned long start, unsigned long size, unsigned long stride) { + unsigned long asid = get_mm_asid(mm); unsigned int cpu;

if (cpumask_empty(cmask)) @@ -105,30 +113,26 @@ static void __flush_tlb_range(const struct cpumask *cmask, unsigned long asid, }

put_cpu(); -}

-static inline unsigned long get_mm_asid(struct mm_struct *mm) -{ - return cntx2asid(atomic_long_read(&mm->context.id)); + if (mm) + mmu_notifier_arch_invalidate_secondary_tlbs(mm, start, start + size); }

void flush_tlb_mm(struct mm_struct *mm) { - __flush_tlb_range(mm_cpumask(mm), get_mm_asid(mm), - 0, FLUSH_TLB_MAX_SIZE, PAGE_SIZE); + __flush_tlb_range(mm, mm_cpumask(mm), 0, FLUSH_TLB_MAX_SIZE, PAGE_SIZE); }

void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start, unsigned long end, unsigned int page_size) { - __flush_tlb_range(mm_cpumask(mm), get_mm_asid(mm), - start, end - start, page_size); + __flush_tlb_range(mm, mm_cpumask(mm), start, end - start, page_size); }

void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) { - __flush_tlb_range(mm_cpumask(vma->vm_mm), get_mm_asid(vma->vm_mm), + __flush_tlb_range(vma->vm_mm, mm_cpumask(vma->vm_mm), addr, PAGE_SIZE, PAGE_SIZE); }

@@ -161,13 +165,13 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } }

- __flush_tlb_range(mm_cpumask(vma->vm_mm), get_mm_asid(vma->vm_mm), + __flush_tlb_range(vma->vm_mm, mm_cpumask(vma->vm_mm), start, end - start, stride_size); }

void flush_tlb_kernel_range(unsigned long start, unsigned long end) { - __flush_tlb_range(cpu_online_mask, FLUSH_TLB_NO_ASID, + __flush_tlb_range(NULL, cpu_online_mask, start, end - start, PAGE_SIZE); }

@@ -175,7 +179,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - __flush_tlb_range(mm_cpumask(vma->vm_mm), get_mm_asid(vma->vm_mm), + __flush_tlb_range(vma->vm_mm, mm_cpumask(vma->vm_mm), start, end - start, PMD_SIZE); } #endif @@ -189,7 +193,10 @@ void arch_tlbbatch_add_pending(struct arch_tlbflush_unmap_batch *batch, struct mm_struct *mm, unsigned long uaddr) { + unsigned long start = uaddr & PAGE_MASK; + cpumask_or(&batch->cpumask, &batch->cpumask, mm_cpumask(mm)); + mmu_notifier_arch_invalidate_secondary_tlbs(mm, start, start + PAGE_SIZE); }

void arch_flush_tlb_batched_pending(struct mm_struct *mm) @@ -199,7 +206,7 @@ void arch_flush_tlb_batched_pending(struct mm_struct *mm)

void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch) { - __flush_tlb_range(&batch->cpumask, FLUSH_TLB_NO_ASID, 0, - FLUSH_TLB_MAX_SIZE, PAGE_SIZE); + __flush_tlb_range(NULL, &batch->cpumask, + 0, FLUSH_TLB_MAX_SIZE, PAGE_SIZE); cpumask_clear(&batch->cpumask); }

From: Al Viro viro@zeniv.linux.org.uk

[ Upstream commit 00cdfdcfa0806202aea56b02cedbf87ef1e75df8 ]

Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/hypfs/hypfs_diag_fs.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/arch/s390/hypfs/hypfs_diag_fs.c b/arch/s390/hypfs/hypfs_diag_fs.c index 00a6d370a2803..280266a74f378 100644 --- a/arch/s390/hypfs/hypfs_diag_fs.c +++ b/arch/s390/hypfs/hypfs_diag_fs.c @@ -208,6 +208,8 @@ static int hypfs_create_cpu_files(struct dentry *cpus_dir, void *cpu_info) snprintf(buffer, TMP_SIZE, "%d", cpu_info__cpu_addr(diag204_get_info_type(), cpu_info)); cpu_dir = hypfs_mkdir(cpus_dir, buffer); + if (IS_ERR(cpu_dir)) + return PTR_ERR(cpu_dir); rc = hypfs_create_u64(cpu_dir, "mgmtime", cpu_info__acc_time(diag204_get_info_type(), cpu_info) - cpu_info__lp_time(diag204_get_info_type(), cpu_info));

From: Kai Mäkisara Kai.Makisara@kolumbus.fi

[ Upstream commit ad77cebf97bd42c93ab4e3bffd09f2b905c1959a ]

The SCSI ERASE command erases from the current position onwards. Don't clear the position variables.

Signed-off-by: Kai Mäkisara Kai.Makisara@kolumbus.fi Link: https://lore.kernel.org/r/20250311112516.5548-3-Kai.Makisara@kolumbus.fi Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/st.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 1c0951168f646..1cfd7e71dcdde 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -2894,7 +2894,6 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon timeout = STp->long_timeout * 8;

DEBC_printk(STp, "Erasing tape.\n"); - fileno = blkno = at_sm = 0; break; case MTSETBLK: /* Set block length */ case MTSETDENSITY: /* Set tape density */

From: Mykyta Yatsenko yatsenko@meta.com

[ Upstream commit 974ef9f0d23edc1a802691c585b84514b414a96d ]

Pass BPF token from bpf_program__set_attach_target to BPF_BTF_GET_FD_BY_ID bpf command. When freplace program attaches to target program, it needs to look up for BTF of the target, this may require BPF token, if, for example, running from user namespace.

Signed-off-by: Mykyta Yatsenko yatsenko@meta.com Signed-off-by: Andrii Nakryiko andrii@kernel.org Acked-by: Yonghong Song yonghong.song@linux.dev Link: https://lore.kernel.org/bpf/20250317174039.161275-4-mykyta.yatsenko5@gmail.c... Signed-off-by: Sasha Levin sashal@kernel.org --- tools/lib/bpf/bpf.c | 3 ++- tools/lib/bpf/bpf.h | 3 ++- tools/lib/bpf/btf.c | 15 +++++++++++++-- tools/lib/bpf/libbpf.c | 10 +++++----- tools/lib/bpf/libbpf_internal.h | 1 + 5 files changed, 23 insertions(+), 9 deletions(-)

diff --git a/tools/lib/bpf/bpf.c b/tools/lib/bpf/bpf.c index 2a4c71501a17d..72470acce67b7 100644 --- a/tools/lib/bpf/bpf.c +++ b/tools/lib/bpf/bpf.c @@ -1095,7 +1095,7 @@ int bpf_map_get_fd_by_id(__u32 id) int bpf_btf_get_fd_by_id_opts(__u32 id, const struct bpf_get_fd_by_id_opts *opts) { - const size_t attr_sz = offsetofend(union bpf_attr, open_flags); + const size_t attr_sz = offsetofend(union bpf_attr, fd_by_id_token_fd); union bpf_attr attr; int fd;

@@ -1105,6 +1105,7 @@ int bpf_btf_get_fd_by_id_opts(__u32 id, memset(&attr, 0, attr_sz); attr.btf_id = id; attr.open_flags = OPTS_GET(opts, open_flags, 0); + attr.fd_by_id_token_fd = OPTS_GET(opts, token_fd, 0);

fd = sys_bpf_fd(BPF_BTF_GET_FD_BY_ID, &attr, attr_sz); return libbpf_err_errno(fd); diff --git a/tools/lib/bpf/bpf.h b/tools/lib/bpf/bpf.h index a4a7b1ad1b631..b93d00968cba1 100644 --- a/tools/lib/bpf/bpf.h +++ b/tools/lib/bpf/bpf.h @@ -484,9 +484,10 @@ LIBBPF_API int bpf_link_get_next_id(__u32 start_id, __u32 *next_id); struct bpf_get_fd_by_id_opts { size_t sz; /* size of this struct for forward/backward compatibility */ __u32 open_flags; /* permissions requested for the operation on fd */ + __u32 token_fd; size_t :0; }; -#define bpf_get_fd_by_id_opts__last_field open_flags +#define bpf_get_fd_by_id_opts__last_field token_fd

LIBBPF_API int bpf_prog_get_fd_by_id(__u32 id); LIBBPF_API int bpf_prog_get_fd_by_id_opts(__u32 id, diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c index 27e7bfae953bd..3a7e0ba9f5923 100644 --- a/tools/lib/bpf/btf.c +++ b/tools/lib/bpf/btf.c @@ -1618,12 +1618,18 @@ struct btf *btf_get_from_fd(int btf_fd, struct btf *base_btf) return btf; }

-struct btf *btf__load_from_kernel_by_id_split(__u32 id, struct btf *base_btf) +struct btf *btf_load_from_kernel(__u32 id, struct btf *base_btf, int token_fd) { struct btf *btf; int btf_fd; + LIBBPF_OPTS(bpf_get_fd_by_id_opts, opts); + + if (token_fd) { + opts.open_flags |= BPF_F_TOKEN_FD; + opts.token_fd = token_fd; + }

- btf_fd = bpf_btf_get_fd_by_id(id); + btf_fd = bpf_btf_get_fd_by_id_opts(id, &opts); if (btf_fd < 0) return libbpf_err_ptr(-errno);

@@ -1633,6 +1639,11 @@ struct btf *btf__load_from_kernel_by_id_split(__u32 id, struct btf *base_btf) return libbpf_ptr(btf); }

+struct btf *btf__load_from_kernel_by_id_split(__u32 id, struct btf *base_btf) +{ + return btf_load_from_kernel(id, base_btf, 0); +} + struct btf *btf__load_from_kernel_by_id(__u32 id) { return btf__load_from_kernel_by_id_split(id, NULL); diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index 5ff643e60d09c..5b45f76059296 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -9936,7 +9936,7 @@ int libbpf_find_vmlinux_btf_id(const char *name, return libbpf_err(err); }

-static int libbpf_find_prog_btf_id(const char *name, __u32 attach_prog_fd) +static int libbpf_find_prog_btf_id(const char *name, __u32 attach_prog_fd, int token_fd) { struct bpf_prog_info info; __u32 info_len = sizeof(info); @@ -9956,7 +9956,7 @@ static int libbpf_find_prog_btf_id(const char *name, __u32 attach_prog_fd) pr_warn("The target program doesn't have BTF\n"); goto out; } - btf = btf__load_from_kernel_by_id(info.btf_id); + btf = btf_load_from_kernel(info.btf_id, NULL, token_fd); err = libbpf_get_error(btf); if (err) { pr_warn("Failed to get BTF %d of the program: %d\n", info.btf_id, err); @@ -10039,7 +10039,7 @@ static int libbpf_find_attach_btf_id(struct bpf_program *prog, const char *attac pr_warn("prog '%s': attach program FD is not set\n", prog->name); return -EINVAL; } - err = libbpf_find_prog_btf_id(attach_name, attach_prog_fd); + err = libbpf_find_prog_btf_id(attach_name, attach_prog_fd, prog->obj->token_fd); if (err < 0) { pr_warn("prog '%s': failed to find BPF program (FD %d) BTF ID for '%s': %d\n", prog->name, attach_prog_fd, attach_name, err); @@ -12804,7 +12804,7 @@ struct bpf_link *bpf_program__attach_freplace(const struct bpf_program *prog, if (target_fd) { LIBBPF_OPTS(bpf_link_create_opts, target_opts);

- btf_id = libbpf_find_prog_btf_id(attach_func_name, target_fd); + btf_id = libbpf_find_prog_btf_id(attach_func_name, target_fd, prog->obj->token_fd); if (btf_id < 0) return libbpf_err_ptr(btf_id);

@@ -13629,7 +13629,7 @@ int bpf_program__set_attach_target(struct bpf_program *prog,

if (attach_prog_fd) { btf_id = libbpf_find_prog_btf_id(attach_func_name, - attach_prog_fd); + attach_prog_fd, prog->obj->token_fd); if (btf_id < 0) return libbpf_err(btf_id); } else { diff --git a/tools/lib/bpf/libbpf_internal.h b/tools/lib/bpf/libbpf_internal.h index 408df59e07719..bd7adb8594d40 100644 --- a/tools/lib/bpf/libbpf_internal.h +++ b/tools/lib/bpf/libbpf_internal.h @@ -408,6 +408,7 @@ int libbpf__load_raw_btf(const char *raw_types, size_t types_len, int btf_load_into_kernel(struct btf *btf, char *log_buf, size_t log_sz, __u32 log_level, int token_fd); +struct btf *btf_load_from_kernel(__u32 id, struct btf *base_btf, int token_fd);

struct btf *btf_get_from_fd(int btf_fd, struct btf *base_btf); void btf_get_kernel_prefix_kind(enum bpf_attach_type attach_type,

From: Frank Li Frank.Li@nxp.com

[ Upstream commit 8f4a489b370e6612700aa16b9e4373b2d85d7503 ]

The msg_res region translates writes into PCIe Message TLPs. Previously we mapped this region using atu.cpu_addr, the input address programmed into the ATU.

"cpu_addr" is a misnomer because when a bus fabric translates addresses between the CPU and the ATU, the ATU input address is different from the CPU address. A future patch will rename "cpu_addr" and correct the value to be the ATU input address instead of the CPU physical address.

Map the msg_res region before writing to it using the msg_res resource start, a CPU physical address.

Link: https://lore.kernel.org/r/20250315201548.858189-2-helgaas@kernel.org Signed-off-by: Frank Li Frank.Li@nxp.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/dwc/pcie-designware-host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 120e2aca5164a..d428457d9c432 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -902,7 +902,7 @@ static int dw_pcie_pme_turn_off(struct dw_pcie *pci) if (ret) return ret;

- mem = ioremap(atu.cpu_addr, pci->region_align); + mem = ioremap(pci->pp.msg_res->start, pci->region_align); if (!mem) return -ENOMEM;

From: Ilpo Järvinen ij@kernel.org

[ Upstream commit 149dfb31615e22271d2525f078c95ea49bc4db24 ]

- Move tcp_count_delivered() earlier and split tcp_count_delivered_ce() out of it - Move tcp_in_ack_event() later - While at it, remove the inline from tcp_in_ack_event() and let the compiler to decide

Accurate ECN's heuristics does not know if there is going to be ACE field based CE counter increase or not until after rtx queue has been processed. Only then the number of ACKed bytes/pkts is available. As CE or not affects presence of FLAG_ECE, that information for tcp_in_ack_event is not yet available in the old location of the call to tcp_in_ack_event().

Signed-off-by: Ilpo Järvinen ij@kernel.org Signed-off-by: Chia-Yu Chang chia-yu.chang@nokia-bell-labs.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/tcp_input.c | 56 +++++++++++++++++++++++++------------------- 1 file changed, 32 insertions(+), 24 deletions(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index d93a5a89c5692..d29219e067b7f 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -419,6 +419,20 @@ static bool tcp_ecn_rcv_ecn_echo(const struct tcp_sock *tp, const struct tcphdr return false; }

+static void tcp_count_delivered_ce(struct tcp_sock *tp, u32 ecn_count) +{ + tp->delivered_ce += ecn_count; +} + +/* Updates the delivered and delivered_ce counts */ +static void tcp_count_delivered(struct tcp_sock *tp, u32 delivered, + bool ece_ack) +{ + tp->delivered += delivered; + if (ece_ack) + tcp_count_delivered_ce(tp, delivered); +} + /* Buffer size and advertised window tuning. * * 1. Tuning sk->sk_sndbuf, when connection enters established state. @@ -1154,15 +1168,6 @@ void tcp_mark_skb_lost(struct sock *sk, struct sk_buff *skb) } }

-/* Updates the delivered and delivered_ce counts */ -static void tcp_count_delivered(struct tcp_sock *tp, u32 delivered, - bool ece_ack) -{ - tp->delivered += delivered; - if (ece_ack) - tp->delivered_ce += delivered; -} - /* This procedure tags the retransmission queue when SACKs arrive. * * We have three tag bits: SACKED(S), RETRANS(R) and LOST(L). @@ -3862,12 +3867,23 @@ static void tcp_process_tlp_ack(struct sock *sk, u32 ack, int flag) } }

-static inline void tcp_in_ack_event(struct sock *sk, u32 flags) +static void tcp_in_ack_event(struct sock *sk, int flag) { const struct inet_connection_sock *icsk = inet_csk(sk);

- if (icsk->icsk_ca_ops->in_ack_event) - icsk->icsk_ca_ops->in_ack_event(sk, flags); + if (icsk->icsk_ca_ops->in_ack_event) { + u32 ack_ev_flags = 0; + + if (flag & FLAG_WIN_UPDATE) + ack_ev_flags |= CA_ACK_WIN_UPDATE; + if (flag & FLAG_SLOWPATH) { + ack_ev_flags |= CA_ACK_SLOWPATH; + if (flag & FLAG_ECE) + ack_ev_flags |= CA_ACK_ECE; + } + + icsk->icsk_ca_ops->in_ack_event(sk, ack_ev_flags); + } }

/* Congestion control has updated the cwnd already. So if we're in @@ -3984,12 +4000,8 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) tcp_snd_una_update(tp, ack); flag |= FLAG_WIN_UPDATE;

- tcp_in_ack_event(sk, CA_ACK_WIN_UPDATE); - NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPHPACKS); } else { - u32 ack_ev_flags = CA_ACK_SLOWPATH; - if (ack_seq != TCP_SKB_CB(skb)->end_seq) flag |= FLAG_DATA; else @@ -4001,19 +4013,12 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) flag |= tcp_sacktag_write_queue(sk, skb, prior_snd_una, &sack_state);

- if (tcp_ecn_rcv_ecn_echo(tp, tcp_hdr(skb))) { + if (tcp_ecn_rcv_ecn_echo(tp, tcp_hdr(skb))) flag |= FLAG_ECE; - ack_ev_flags |= CA_ACK_ECE; - }

if (sack_state.sack_delivered) tcp_count_delivered(tp, sack_state.sack_delivered, flag & FLAG_ECE); - - if (flag & FLAG_WIN_UPDATE) - ack_ev_flags |= CA_ACK_WIN_UPDATE; - - tcp_in_ack_event(sk, ack_ev_flags); }

/* This is a deviation from RFC3168 since it states that: @@ -4040,6 +4045,8 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)

tcp_rack_update_reo_wnd(sk, &rs);

+ tcp_in_ack_event(sk, flag); + if (tp->tlp_high_seq) tcp_process_tlp_ack(sk, ack, flag);

@@ -4071,6 +4078,7 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) return 1;

no_queue: + tcp_in_ack_event(sk, flag); /* If data was DSACKed, see if we can undo a cwnd reduction. */ if (flag & FLAG_DSACKING_ACK) { tcp_fastretrans_alert(sk, prior_snd_una, num_dupack, &flag,

From: Josh Poimboeuf jpoimboe@kernel.org

[ Upstream commit b745962cb97569aad026806bb0740663cf813147 ]

Make sure all fatal errors are funneled through the 'out' label with a negative ret.

Signed-off-by: Josh Poimboeuf jpoimboe@kernel.org Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Brendan Jackman jackmanb@google.com Link: https://lore.kernel.org/r/0f49d6a27a080b4012e84e6df1e23097f44cc082.174197534... Signed-off-by: Sasha Levin sashal@kernel.org --- tools/objtool/check.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/tools/objtool/check.c b/tools/objtool/check.c index 175f8adb1b76d..ad4ecc8b3479c 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -4757,8 +4757,10 @@ int check(struct objtool_file *file) init_cfi_state(&force_undefined_cfi); force_undefined_cfi.force_undefined = true;

- if (!cfi_hash_alloc(1UL << (file->elf->symbol_bits - 3))) + if (!cfi_hash_alloc(1UL << (file->elf->symbol_bits - 3))) { + ret = -1; goto out; + }

cfi_hash_add(&init_cfi); cfi_hash_add(&func_cfi); @@ -4775,7 +4777,7 @@ int check(struct objtool_file *file) if (opts.retpoline) { ret = validate_retpoline(file); if (ret < 0) - return ret; + goto out; warnings += ret; }

@@ -4811,7 +4813,7 @@ int check(struct objtool_file *file) */ ret = validate_unrets(file); if (ret < 0) - return ret; + goto out; warnings += ret; }

@@ -4874,7 +4876,7 @@ int check(struct objtool_file *file) if (opts.prefix) { ret = add_prefix_symbols(file); if (ret < 0) - return ret; + goto out; warnings += ret; }

From: Gao Xiang hsiangkao@linux.alibaba.com

[ Upstream commit fe1e57d44d7f106df9048e815e4862cf63921220 ]

- Rename erofs_init_managed_cache() to z_erofs_init_super(); - Move the initialization of managed_pslots into z_erofs_init_super() too; - Move z_erofs_init_super() and packed inode preparation upwards, before the root inode initialization.

Therefore, the root directory can also be compressible.

Signed-off-by: Gao Xiang hsiangkao@linux.alibaba.com Acked-by: Chao Yu chao@kernel.org Link: https://lore.kernel.org/r/20250317054840.3483000-1-hsiangkao@linux.alibaba.c... Signed-off-by: Sasha Levin sashal@kernel.org --- fs/erofs/internal.h | 4 ++-- fs/erofs/super.c | 46 ++++++++++++++++++++++----------------------- fs/erofs/zdata.c | 4 ++-- 3 files changed, 26 insertions(+), 28 deletions(-)

diff --git a/fs/erofs/internal.h b/fs/erofs/internal.h index edbabb3256c9a..2c11e8f3048e9 100644 --- a/fs/erofs/internal.h +++ b/fs/erofs/internal.h @@ -453,6 +453,7 @@ int __init erofs_init_shrinker(void); void erofs_exit_shrinker(void); int __init z_erofs_init_subsystem(void); void z_erofs_exit_subsystem(void); +int z_erofs_init_super(struct super_block *sb); unsigned long z_erofs_shrink_scan(struct erofs_sb_info *sbi, unsigned long nr_shrink); int z_erofs_map_blocks_iter(struct inode *inode, struct erofs_map_blocks *map, @@ -462,7 +463,6 @@ void z_erofs_put_gbuf(void *ptr); int z_erofs_gbuf_growsize(unsigned int nrpages); int __init z_erofs_gbuf_init(void); void z_erofs_gbuf_exit(void); -int erofs_init_managed_cache(struct super_block *sb); int z_erofs_parse_cfgs(struct super_block *sb, struct erofs_super_block *dsb); #else static inline void erofs_shrinker_register(struct super_block *sb) {} @@ -471,7 +471,7 @@ static inline int erofs_init_shrinker(void) { return 0; } static inline void erofs_exit_shrinker(void) {} static inline int z_erofs_init_subsystem(void) { return 0; } static inline void z_erofs_exit_subsystem(void) {} -static inline int erofs_init_managed_cache(struct super_block *sb) { return 0; } +static inline int z_erofs_init_super(struct super_block *sb) { return 0; } #endif /* !CONFIG_EROFS_FS_ZIP */

#ifdef CONFIG_EROFS_FS_BACKED_BY_FILE diff --git a/fs/erofs/super.c b/fs/erofs/super.c index 5b279977c9d5d..3421448fef0e3 100644 --- a/fs/erofs/super.c +++ b/fs/erofs/super.c @@ -664,9 +664,16 @@ static int erofs_fc_fill_super(struct super_block *sb, struct fs_context *fc) else sb->s_flags &= ~SB_POSIXACL;

-#ifdef CONFIG_EROFS_FS_ZIP - xa_init(&sbi->managed_pslots); -#endif + err = z_erofs_init_super(sb); + if (err) + return err; + + if (erofs_sb_has_fragments(sbi) && sbi->packed_nid) { + inode = erofs_iget(sb, sbi->packed_nid); + if (IS_ERR(inode)) + return PTR_ERR(inode); + sbi->packed_inode = inode; + }

inode = erofs_iget(sb, sbi->root_nid); if (IS_ERR(inode)) @@ -678,24 +685,11 @@ static int erofs_fc_fill_super(struct super_block *sb, struct fs_context *fc) iput(inode); return -EINVAL; } - sb->s_root = d_make_root(inode); if (!sb->s_root) return -ENOMEM;

erofs_shrinker_register(sb); - if (erofs_sb_has_fragments(sbi) && sbi->packed_nid) { - sbi->packed_inode = erofs_iget(sb, sbi->packed_nid); - if (IS_ERR(sbi->packed_inode)) { - err = PTR_ERR(sbi->packed_inode); - sbi->packed_inode = NULL; - return err; - } - } - err = erofs_init_managed_cache(sb); - if (err) - return err; - err = erofs_xattr_prefixes_init(sb); if (err) return err; @@ -831,6 +825,16 @@ static int erofs_init_fs_context(struct fs_context *fc) return 0; }

+static void erofs_drop_internal_inodes(struct erofs_sb_info *sbi) +{ + iput(sbi->packed_inode); + sbi->packed_inode = NULL; +#ifdef CONFIG_EROFS_FS_ZIP + iput(sbi->managed_cache); + sbi->managed_cache = NULL; +#endif +} + static void erofs_kill_sb(struct super_block *sb) { struct erofs_sb_info *sbi = EROFS_SB(sb); @@ -840,6 +844,7 @@ static void erofs_kill_sb(struct super_block *sb) kill_anon_super(sb); else kill_block_super(sb); + erofs_drop_internal_inodes(sbi); fs_put_dax(sbi->dif0.dax_dev, NULL); erofs_fscache_unregister_fs(sb); erofs_sb_free(sbi); @@ -850,17 +855,10 @@ static void erofs_put_super(struct super_block *sb) { struct erofs_sb_info *const sbi = EROFS_SB(sb);

- DBG_BUGON(!sbi); - erofs_unregister_sysfs(sb); erofs_shrinker_unregister(sb); erofs_xattr_prefixes_cleanup(sb); -#ifdef CONFIG_EROFS_FS_ZIP - iput(sbi->managed_cache); - sbi->managed_cache = NULL; -#endif - iput(sbi->packed_inode); - sbi->packed_inode = NULL; + erofs_drop_internal_inodes(sbi); erofs_free_dev_context(sbi->devs); sbi->devs = NULL; erofs_fscache_unregister_fs(sb); diff --git a/fs/erofs/zdata.c b/fs/erofs/zdata.c index a8fb4b525f544..cef2aa9226315 100644 --- a/fs/erofs/zdata.c +++ b/fs/erofs/zdata.c @@ -666,18 +666,18 @@ static const struct address_space_operations z_erofs_cache_aops = { .invalidate_folio = z_erofs_cache_invalidate_folio, };

-int erofs_init_managed_cache(struct super_block *sb) +int z_erofs_init_super(struct super_block *sb) { struct inode *const inode = new_inode(sb);

if (!inode) return -ENOMEM; - set_nlink(inode, 1); inode->i_size = OFFSET_MAX; inode->i_mapping->a_ops = &z_erofs_cache_aops; mapping_set_gfp_mask(inode->i_mapping, GFP_KERNEL); EROFS_SB(sb)->managed_cache = inode; + xa_init(&EROFS_SB(sb)->managed_pslots); return 0; }

From: Linus Walleij linus.walleij@linaro.org

[ Upstream commit 17fdf318f5fbe5c27353ae917c0c5a2899d9c259 ]

The current code for the IRQ in pcm6240 makes no sense: it looks up an IRQ with of_irq_get(), treat it as a GPIO by issuing gpio_request(), gpio_direction_input() and gpio_to_irq() on it.

This is just wrong, if the device tree assigns the IRQ from a GPIO number this is just incorrect: it is clearly stated that GPIO providers and IRQ providers are orthogonal.

It is possible to look up an IRQ to a corresponding GPIO line but this is taking an IRQ and pretending it's a GPIO, which is just semantically wrong.

Drop the offending code and treat the IRQ that we get from the device tree as any other IRQ, see for example other codec drivers.

The DT bindings for this codec does not have any in-tree DTS files, which may explain why things are weird.

As a bonus, this moves the driver away from the legacy <linux/gpio.h> include.

Signed-off-by: Linus Walleij linus.walleij@linaro.org Link: https://patch.msgid.link/20250312-pcm-codecs-v1-3-41ffc4f8fc5c@linaro.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/pcm6240.c | 28 +++++++--------------------- sound/soc/codecs/pcm6240.h | 7 +------ 2 files changed, 8 insertions(+), 27 deletions(-)

diff --git a/sound/soc/codecs/pcm6240.c b/sound/soc/codecs/pcm6240.c index 5d99877f88397..e59bb77edf091 100644 --- a/sound/soc/codecs/pcm6240.c +++ b/sound/soc/codecs/pcm6240.c @@ -14,7 +14,7 @@

#include <linux/unaligned.h> #include <linux/firmware.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/of_irq.h> @@ -2035,10 +2035,8 @@ static const struct regmap_config pcmdevice_i2c_regmap = {

static void pcmdevice_remove(struct pcmdevice_priv *pcm_dev) { - if (gpio_is_valid(pcm_dev->irq_info.gpio)) { - gpio_free(pcm_dev->irq_info.gpio); - free_irq(pcm_dev->irq_info.nmb, pcm_dev); - } + if (pcm_dev->irq) + free_irq(pcm_dev->irq, pcm_dev); mutex_destroy(&pcm_dev->codec_lock); }

@@ -2110,7 +2108,7 @@ static int pcmdevice_i2c_probe(struct i2c_client *i2c) ndev = 1; dev_addrs[0] = i2c->addr; } - pcm_dev->irq_info.gpio = of_irq_get(np, 0); + pcm_dev->irq = of_irq_get(np, 0);

for (i = 0; i < ndev; i++) pcm_dev->addr[i] = dev_addrs[i]; @@ -2133,22 +2131,10 @@ static int pcmdevice_i2c_probe(struct i2c_client *i2c)

if (pcm_dev->chip_id == PCM1690) goto skip_interrupt; - if (gpio_is_valid(pcm_dev->irq_info.gpio)) { - dev_dbg(pcm_dev->dev, "irq-gpio = %d", pcm_dev->irq_info.gpio); - - ret = gpio_request(pcm_dev->irq_info.gpio, "PCMDEV-IRQ"); - if (!ret) { - int gpio = pcm_dev->irq_info.gpio; - - gpio_direction_input(gpio); - pcm_dev->irq_info.nmb = gpio_to_irq(gpio); - - } else - dev_err(pcm_dev->dev, "%s: GPIO %d request error\n", - __func__, pcm_dev->irq_info.gpio); + if (pcm_dev->irq) { + dev_dbg(pcm_dev->dev, "irq = %d", pcm_dev->irq); } else - dev_err(pcm_dev->dev, "Looking up irq-gpio failed %d\n", - pcm_dev->irq_info.gpio); + dev_err(pcm_dev->dev, "No irq provided\n");

skip_interrupt: ret = devm_snd_soc_register_component(&i2c->dev, diff --git a/sound/soc/codecs/pcm6240.h b/sound/soc/codecs/pcm6240.h index 1e125bb972860..2d8f9e798139a 100644 --- a/sound/soc/codecs/pcm6240.h +++ b/sound/soc/codecs/pcm6240.h @@ -208,11 +208,6 @@ struct pcmdevice_regbin { struct pcmdevice_config_info **cfg_info; };

-struct pcmdevice_irqinfo { - int gpio; - int nmb; -}; - struct pcmdevice_priv { struct snd_soc_component *component; struct i2c_client *client; @@ -221,7 +216,7 @@ struct pcmdevice_priv { struct gpio_desc *hw_rst; struct regmap *regmap; struct pcmdevice_regbin regbin; - struct pcmdevice_irqinfo irq_info; + int irq; unsigned int addr[PCMDEVICE_MAX_I2C_DEVICES]; unsigned int chip_id; int cur_conf;

From: Yonghong Song yonghong.song@linux.dev

[ Upstream commit 4b82b181a26cff8bf7adc3a85a88d121d92edeaf ]

Currently for bpf progs in a cgroup hierarchy, the effective prog array is computed from bottom cgroup to upper cgroups (post-ordering). For example, the following cgroup hierarchy root cgroup: p1, p2 subcgroup: p3, p4 have BPF_F_ALLOW_MULTI for both cgroup levels. The effective cgroup array ordering looks like p3 p4 p1 p2 and at run time, progs will execute based on that order.

But in some cases, it is desirable to have root prog executes earlier than children progs (pre-ordering). For example, - prog p1 intends to collect original pkt dest addresses. - prog p3 will modify original pkt dest addresses to a proxy address for security reason. The end result is that prog p1 gets proxy address which is not what it wants. Putting p1 to every child cgroup is not desirable either as it will duplicate itself in many child cgroups. And this is exactly a use case we are encountering in Meta.

To fix this issue, let us introduce a flag BPF_F_PREORDER. If the flag is specified at attachment time, the prog has higher priority and the ordering with that flag will be from top to bottom (pre-ordering). For example, in the above example, root cgroup: p1, p2 subcgroup: p3, p4 Let us say p2 and p4 are marked with BPF_F_PREORDER. The final effective array ordering will be p2 p4 p3 p1

Suggested-by: Andrii Nakryiko andrii@kernel.org Acked-by: Andrii Nakryiko andrii@kernel.org Signed-off-by: Yonghong Song yonghong.song@linux.dev Link: https://lore.kernel.org/r/20250224230116.283071-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/bpf-cgroup.h | 1 + include/uapi/linux/bpf.h | 1 + kernel/bpf/cgroup.c | 33 +++++++++++++++++++++++++-------- kernel/bpf/syscall.c | 3 ++- tools/include/uapi/linux/bpf.h | 1 + 5 files changed, 30 insertions(+), 9 deletions(-)

diff --git a/include/linux/bpf-cgroup.h b/include/linux/bpf-cgroup.h index ce91d9b2acb9f..7e029c82ae45f 100644 --- a/include/linux/bpf-cgroup.h +++ b/include/linux/bpf-cgroup.h @@ -111,6 +111,7 @@ struct bpf_prog_list { struct bpf_prog *prog; struct bpf_cgroup_link *link; struct bpf_cgroup_storage *storage[MAX_BPF_CGROUP_STORAGE_TYPE]; + u32 flags; };

int cgroup_bpf_inherit(struct cgroup *cgrp); diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 4a939c90dc2e4..552fd633f8200 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1206,6 +1206,7 @@ enum bpf_perf_event_type { #define BPF_F_BEFORE (1U << 3) #define BPF_F_AFTER (1U << 4) #define BPF_F_ID (1U << 5) +#define BPF_F_PREORDER (1U << 6) #define BPF_F_LINK BPF_F_LINK /* 1 << 13 */

/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the diff --git a/kernel/bpf/cgroup.c b/kernel/bpf/cgroup.c index 025d7e2214aeb..c0d606c40195d 100644 --- a/kernel/bpf/cgroup.c +++ b/kernel/bpf/cgroup.c @@ -369,7 +369,7 @@ static struct bpf_prog *prog_list_prog(struct bpf_prog_list *pl) /* count number of elements in the list. * it's slow but the list cannot be long */ -static u32 prog_list_length(struct hlist_head *head) +static u32 prog_list_length(struct hlist_head *head, int *preorder_cnt) { struct bpf_prog_list *pl; u32 cnt = 0; @@ -377,6 +377,8 @@ static u32 prog_list_length(struct hlist_head *head) hlist_for_each_entry(pl, head, node) { if (!prog_list_prog(pl)) continue; + if (preorder_cnt && (pl->flags & BPF_F_PREORDER)) + (*preorder_cnt)++; cnt++; } return cnt; @@ -400,7 +402,7 @@ static bool hierarchy_allows_attach(struct cgroup *cgrp,

if (flags & BPF_F_ALLOW_MULTI) return true; - cnt = prog_list_length(&p->bpf.progs[atype]); + cnt = prog_list_length(&p->bpf.progs[atype], NULL); WARN_ON_ONCE(cnt > 1); if (cnt == 1) return !!(flags & BPF_F_ALLOW_OVERRIDE); @@ -423,12 +425,12 @@ static int compute_effective_progs(struct cgroup *cgrp, struct bpf_prog_array *progs; struct bpf_prog_list *pl; struct cgroup *p = cgrp; - int cnt = 0; + int i, j, cnt = 0, preorder_cnt = 0, fstart, bstart, init_bstart;

/* count number of effective programs by walking parents */ do { if (cnt == 0 || (p->bpf.flags[atype] & BPF_F_ALLOW_MULTI)) - cnt += prog_list_length(&p->bpf.progs[atype]); + cnt += prog_list_length(&p->bpf.progs[atype], &preorder_cnt); p = cgroup_parent(p); } while (p);

@@ -439,20 +441,34 @@ static int compute_effective_progs(struct cgroup *cgrp, /* populate the array with effective progs */ cnt = 0; p = cgrp; + fstart = preorder_cnt; + bstart = preorder_cnt - 1; do { if (cnt > 0 && !(p->bpf.flags[atype] & BPF_F_ALLOW_MULTI)) continue;

+ init_bstart = bstart; hlist_for_each_entry(pl, &p->bpf.progs[atype], node) { if (!prog_list_prog(pl)) continue;

- item = &progs->items[cnt]; + if (pl->flags & BPF_F_PREORDER) { + item = &progs->items[bstart]; + bstart--; + } else { + item = &progs->items[fstart]; + fstart++; + } item->prog = prog_list_prog(pl); bpf_cgroup_storages_assign(item->cgroup_storage, pl->storage); cnt++; } + + /* reverse pre-ordering progs at this cgroup level */ + for (i = bstart + 1, j = init_bstart; i < j; i++, j--) + swap(progs->items[i], progs->items[j]); + } while ((p = cgroup_parent(p)));

*array = progs; @@ -663,7 +679,7 @@ static int __cgroup_bpf_attach(struct cgroup *cgrp, */ return -EPERM;

- if (prog_list_length(progs) >= BPF_CGROUP_MAX_PROGS) + if (prog_list_length(progs, NULL) >= BPF_CGROUP_MAX_PROGS) return -E2BIG;

pl = find_attach_entry(progs, prog, link, replace_prog, @@ -698,6 +714,7 @@ static int __cgroup_bpf_attach(struct cgroup *cgrp,

pl->prog = prog; pl->link = link; + pl->flags = flags; bpf_cgroup_storages_assign(pl->storage, storage); cgrp->bpf.flags[atype] = saved_flags;

@@ -1073,7 +1090,7 @@ static int __cgroup_bpf_query(struct cgroup *cgrp, const union bpf_attr *attr, lockdep_is_held(&cgroup_mutex)); total_cnt += bpf_prog_array_length(effective); } else { - total_cnt += prog_list_length(&cgrp->bpf.progs[atype]); + total_cnt += prog_list_length(&cgrp->bpf.progs[atype], NULL); } }

@@ -1105,7 +1122,7 @@ static int __cgroup_bpf_query(struct cgroup *cgrp, const union bpf_attr *attr, u32 id;

progs = &cgrp->bpf.progs[atype]; - cnt = min_t(int, prog_list_length(progs), total_cnt); + cnt = min_t(int, prog_list_length(progs, NULL), total_cnt); i = 0; hlist_for_each_entry(pl, progs, node) { prog = prog_list_prog(pl); diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index fc048d3c0e69f..ab74a226e3d6d 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -4042,7 +4042,8 @@ static int bpf_prog_attach_check_attach_type(const struct bpf_prog *prog, #define BPF_F_ATTACH_MASK_BASE \ (BPF_F_ALLOW_OVERRIDE | \ BPF_F_ALLOW_MULTI | \ - BPF_F_REPLACE) + BPF_F_REPLACE | \ + BPF_F_PREORDER)

#define BPF_F_ATTACH_MASK_MPROG \ (BPF_F_REPLACE | \ diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 4a939c90dc2e4..552fd633f8200 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -1206,6 +1206,7 @@ enum bpf_perf_event_type { #define BPF_F_BEFORE (1U << 3) #define BPF_F_AFTER (1U << 4) #define BPF_F_ID (1U << 5) +#define BPF_F_PREORDER (1U << 6) #define BPF_F_LINK BPF_F_LINK /* 1 << 13 */

/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the

From: Masahiro Yamada masahiroy@kernel.org

[ Upstream commit 226ac19c217f24f0927d0a73cf9ee613971a188d ]

When conf_read_simple() is called with S_DEF_AUTO, it is meant to read previous symbol values from include/config/auto.conf to determine which include/config/* files should be touched.

This process should not modify the current symbol status in any way. However, conf_touch_deps() currently invalidates all symbol values and recalculates them, which is totally unneeded.

Signed-off-by: Masahiro Yamada masahiroy@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/kconfig/confdata.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 3b55e7a4131d9..ac95661a1c9dd 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -385,7 +385,7 @@ int conf_read_simple(const char *name, int def)

def_flags = SYMBOL_DEF << def; for_all_symbols(sym) { - sym->flags &= ~(def_flags|SYMBOL_VALID); + sym->flags &= ~def_flags; switch (sym->type) { case S_INT: case S_HEX: @@ -398,7 +398,11 @@ int conf_read_simple(const char *name, int def) } }

- expr_invalidate_all(); + if (def == S_DEF_USER) { + for_all_symbols(sym) + sym->flags &= ~SYMBOL_VALID; + expr_invalidate_all(); + }

while (getline_stripped(&line, &line_asize, in) != -1) { struct menu *choice; @@ -464,6 +468,9 @@ int conf_read_simple(const char *name, int def) if (conf_set_sym_val(sym, def, def_flags, val)) continue;

+ if (def != S_DEF_USER) + continue; + /* * If this is a choice member, give it the highest priority. * If conflicting CONFIG options are given from an input file, @@ -967,10 +974,8 @@ static int conf_touch_deps(void) depfile_path[depfile_prefix_len] = 0;

conf_read_simple(name, S_DEF_AUTO); - sym_calc_value(modules_sym);

for_all_symbols(sym) { - sym_calc_value(sym); if (sym_is_choice(sym)) continue; if (sym->flags & SYMBOL_WRITE) { @@ -1084,12 +1089,12 @@ int conf_write_autoconf(int overwrite) if (ret) return -1;

- if (conf_touch_deps()) - return 1; - for_all_symbols(sym) sym_calc_value(sym);

+ if (conf_touch_deps()) + return 1; + ret = __conf_write_autoconf(conf_get_autoheader_name(), print_symbol_for_c, &comment_style_c);

From: Mikulas Patocka mpatocka@redhat.com

[ Upstream commit 45fc728515c14f53f6205789de5bfd72a95af3b8 ]

The devices with size >= 2^63 bytes can't be used reliably by userspace because the type off_t is a signed 64-bit integer.

Therefore, we limit the maximum size of a device mapper device to 2^63-512 bytes.

Signed-off-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-table.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index dbd39b9722b91..337255393b3c4 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -697,6 +697,10 @@ int dm_table_add_target(struct dm_table *t, const char *type, DMERR("%s: zero-length target", dm_device_name(t->md)); return -EINVAL; } + if (start + len < start || start + len > LLONG_MAX >> SECTOR_SHIFT) { + DMERR("%s: too large device", dm_device_name(t->md)); + return -EINVAL; + }

ti->type = dm_get_target_type(type); if (!ti->type) {

From: Frediano Ziglio frediano.ziglio@cloud.com

[ Upstream commit 2356f15caefc0cc63d9cc5122641754f76ef9b25 ]

On XenServer on Windows machine a platform device with ID 2 instead of 1 is used.

This device is mainly identical to device 1 but due to some Windows update behaviour it was decided to use a device with a different ID.

This causes compatibility issues with Linux which expects, if Xen is detected, to find a Xen platform device (5853:0001) otherwise code will crash due to some missing initialization (specifically grant tables). Specifically from dmesg

RIP: 0010:gnttab_expand+0x29/0x210 Code: 90 0f 1f 44 00 00 55 31 d2 48 89 e5 41 57 41 56 41 55 41 89 fd 41 54 53 48 83 ec 10 48 8b 05 7e 9a 49 02 44 8b 35 a7 9a 49 02 <8b> 48 04 8d 44 39 ff f7 f1 45 8d 24 06 89 c3 e8 43 fe ff ff 44 39 RSP: 0000:ffffba34c01fbc88 EFLAGS: 00010086 ...

The device 2 is presented by Xapi adding device specification to Qemu command line.

Signed-off-by: Frediano Ziglio frediano.ziglio@cloud.com Acked-by: Juergen Gross jgross@suse.com Message-ID: 20250227145016.25350-1-frediano.ziglio@cloud.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/platform-pci.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c index 544d3f9010b92..1db82da56db62 100644 --- a/drivers/xen/platform-pci.c +++ b/drivers/xen/platform-pci.c @@ -26,6 +26,8 @@

#define DRV_NAME "xen-platform-pci"

+#define PCI_DEVICE_ID_XEN_PLATFORM_XS61 0x0002 + static unsigned long platform_mmio; static unsigned long platform_mmio_alloc; static unsigned long platform_mmiolen; @@ -174,6 +176,8 @@ static int platform_pci_probe(struct pci_dev *pdev, static const struct pci_device_id platform_pci_tbl[] = { {PCI_VENDOR_ID_XEN, PCI_DEVICE_ID_XEN_PLATFORM, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_XEN, PCI_DEVICE_ID_XEN_PLATFORM_XS61, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {0,} };

From: Shree Ramamoorthy s-ramamoorthy@ti.com

[ Upstream commit 76b58d5111fdcffce615beb71520bc7a6f1742c9 ]

The chipid macro/variable and regmap_read function call is not needed because the TPS65219_REG_TI_DEV_ID register value is not a consistent value across TPS65219 PMIC config versions. Reading from the DEV_ID register without a consistent value to compare it to isn't useful. There isn't a way to verify the match data ID is the same ID read from the DEV_ID device register. 0xF0 isn't a DEV_ID value consistent across TPS65219 NVM configurations.

For TPS65215, there is a consistent value in bits 5-0 of the DEV_ID register. However, there are other error checks in place within probe() that apply to both PMICs rather than keeping this isolated check for one PMIC.

Signed-off-by: Shree Ramamoorthy s-ramamoorthy@ti.com Link: https://lore.kernel.org/r/20250206173725.386720-4-s-ramamoorthy@ti.com Signed-off-by: Lee Jones lee@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/tps65219.c | 7 ------- 1 file changed, 7 deletions(-)

diff --git a/drivers/mfd/tps65219.c b/drivers/mfd/tps65219.c index 57ff5cb294a66..d3b77abec786e 100644 --- a/drivers/mfd/tps65219.c +++ b/drivers/mfd/tps65219.c @@ -228,7 +228,6 @@ static const struct regmap_irq_chip tps65219_irq_chip = { static int tps65219_probe(struct i2c_client *client) { struct tps65219 *tps; - unsigned int chipid; bool pwr_button; int ret;

@@ -253,12 +252,6 @@ static int tps65219_probe(struct i2c_client *client) if (ret) return ret;

- ret = regmap_read(tps->regmap, TPS65219_REG_TI_DEV_ID, &chipid); - if (ret) { - dev_err(tps->dev, "Failed to read device ID: %d\n", ret); - return ret; - } - ret = devm_mfd_add_devices(tps->dev, PLATFORM_DEVID_AUTO, tps65219_cells, ARRAY_SIZE(tps65219_cells), NULL, 0, regmap_irq_get_domain(tps->irq_data));

From: Alex Deucher alexander.deucher@amd.com

[ Upstream commit e27b36ea6ba5f29e91fcfb375ea29503708fcf43 ]

Just use the default values. There's not need to get the value from hardware and it could cause problems if we do that at runtime and gfxoff is active.

Reviewed-by: Mukul Joshi mukul.joshi@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 47 ++++++++++++++++++-------- 1 file changed, 32 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c index 0357fea8ae1df..1f06b22dbe7c6 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c @@ -63,6 +63,23 @@ #define regPC_CONFIG_CNTL_1 0x194d #define regPC_CONFIG_CNTL_1_BASE_IDX 1

+#define regCP_GFX_MQD_CONTROL_DEFAULT 0x00000100 +#define regCP_GFX_HQD_VMID_DEFAULT 0x00000000 +#define regCP_GFX_HQD_QUEUE_PRIORITY_DEFAULT 0x00000000 +#define regCP_GFX_HQD_QUANTUM_DEFAULT 0x00000a01 +#define regCP_GFX_HQD_CNTL_DEFAULT 0x00a00000 +#define regCP_RB_DOORBELL_CONTROL_DEFAULT 0x00000000 +#define regCP_GFX_HQD_RPTR_DEFAULT 0x00000000 + +#define regCP_HQD_EOP_CONTROL_DEFAULT 0x00000006 +#define regCP_HQD_PQ_DOORBELL_CONTROL_DEFAULT 0x00000000 +#define regCP_MQD_CONTROL_DEFAULT 0x00000100 +#define regCP_HQD_PQ_CONTROL_DEFAULT 0x00308509 +#define regCP_HQD_PQ_DOORBELL_CONTROL_DEFAULT 0x00000000 +#define regCP_HQD_PQ_RPTR_DEFAULT 0x00000000 +#define regCP_HQD_PERSISTENT_STATE_DEFAULT 0x0be05501 +#define regCP_HQD_IB_CONTROL_DEFAULT 0x00300000 + MODULE_FIRMWARE("amdgpu/gc_11_0_0_pfp.bin"); MODULE_FIRMWARE("amdgpu/gc_11_0_0_me.bin"); MODULE_FIRMWARE("amdgpu/gc_11_0_0_mec.bin"); @@ -3896,7 +3913,7 @@ static void gfx_v11_0_gfx_mqd_set_priority(struct amdgpu_device *adev, if (prop->hqd_pipe_priority == AMDGPU_GFX_PIPE_PRIO_HIGH) priority = 1;

- tmp = RREG32_SOC15(GC, 0, regCP_GFX_HQD_QUEUE_PRIORITY); + tmp = regCP_GFX_HQD_QUEUE_PRIORITY_DEFAULT; tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_QUEUE_PRIORITY, PRIORITY_LEVEL, priority); mqd->cp_gfx_hqd_queue_priority = tmp; } @@ -3918,14 +3935,14 @@ static int gfx_v11_0_gfx_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_mqd_base_addr_hi = upper_32_bits(prop->mqd_gpu_addr);

/* set up mqd control */ - tmp = RREG32_SOC15(GC, 0, regCP_GFX_MQD_CONTROL); + tmp = regCP_GFX_MQD_CONTROL_DEFAULT; tmp = REG_SET_FIELD(tmp, CP_GFX_MQD_CONTROL, VMID, 0); tmp = REG_SET_FIELD(tmp, CP_GFX_MQD_CONTROL, PRIV_STATE, 1); tmp = REG_SET_FIELD(tmp, CP_GFX_MQD_CONTROL, CACHE_POLICY, 0); mqd->cp_gfx_mqd_control = tmp;

/* set up gfx_hqd_vimd with 0x0 to indicate the ring buffer's vmid */ - tmp = RREG32_SOC15(GC, 0, regCP_GFX_HQD_VMID); + tmp = regCP_GFX_HQD_VMID_DEFAULT; tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_VMID, VMID, 0); mqd->cp_gfx_hqd_vmid = 0;

@@ -3933,7 +3950,7 @@ static int gfx_v11_0_gfx_mqd_init(struct amdgpu_device *adev, void *m, gfx_v11_0_gfx_mqd_set_priority(adev, mqd, prop);

/* set up time quantum */ - tmp = RREG32_SOC15(GC, 0, regCP_GFX_HQD_QUANTUM); + tmp = regCP_GFX_HQD_QUANTUM_DEFAULT; tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_QUANTUM, QUANTUM_EN, 1); mqd->cp_gfx_hqd_quantum = tmp;

@@ -3955,7 +3972,7 @@ static int gfx_v11_0_gfx_mqd_init(struct amdgpu_device *adev, void *m,

/* set up the gfx_hqd_control, similar as CP_RB0_CNTL */ rb_bufsz = order_base_2(prop->queue_size / 4) - 1; - tmp = RREG32_SOC15(GC, 0, regCP_GFX_HQD_CNTL); + tmp = regCP_GFX_HQD_CNTL_DEFAULT; tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_CNTL, RB_BUFSZ, rb_bufsz); tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_CNTL, RB_BLKSZ, rb_bufsz - 2); #ifdef __BIG_ENDIAN @@ -3964,7 +3981,7 @@ static int gfx_v11_0_gfx_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_gfx_hqd_cntl = tmp;

/* set up cp_doorbell_control */ - tmp = RREG32_SOC15(GC, 0, regCP_RB_DOORBELL_CONTROL); + tmp = regCP_RB_DOORBELL_CONTROL_DEFAULT; if (prop->use_doorbell) { tmp = REG_SET_FIELD(tmp, CP_RB_DOORBELL_CONTROL, DOORBELL_OFFSET, prop->doorbell_index); @@ -3976,7 +3993,7 @@ static int gfx_v11_0_gfx_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_rb_doorbell_control = tmp;

/* reset read and write pointers, similar to CP_RB0_WPTR/_RPTR */ - mqd->cp_gfx_hqd_rptr = RREG32_SOC15(GC, 0, regCP_GFX_HQD_RPTR); + mqd->cp_gfx_hqd_rptr = regCP_GFX_HQD_RPTR_DEFAULT;

/* active the queue */ mqd->cp_gfx_hqd_active = 1; @@ -4062,14 +4079,14 @@ static int gfx_v11_0_compute_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_hqd_eop_base_addr_hi = upper_32_bits(eop_base_addr);

/* set the EOP size, register value is 2^(EOP_SIZE+1) dwords */ - tmp = RREG32_SOC15(GC, 0, regCP_HQD_EOP_CONTROL); + tmp = regCP_HQD_EOP_CONTROL_DEFAULT; tmp = REG_SET_FIELD(tmp, CP_HQD_EOP_CONTROL, EOP_SIZE, (order_base_2(GFX11_MEC_HPD_SIZE / 4) - 1));

mqd->cp_hqd_eop_control = tmp;

/* enable doorbell? */ - tmp = RREG32_SOC15(GC, 0, regCP_HQD_PQ_DOORBELL_CONTROL); + tmp = regCP_HQD_PQ_DOORBELL_CONTROL_DEFAULT;

if (prop->use_doorbell) { tmp = REG_SET_FIELD(tmp, CP_HQD_PQ_DOORBELL_CONTROL, @@ -4098,7 +4115,7 @@ static int gfx_v11_0_compute_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_mqd_base_addr_hi = upper_32_bits(prop->mqd_gpu_addr);

/* set MQD vmid to 0 */ - tmp = RREG32_SOC15(GC, 0, regCP_MQD_CONTROL); + tmp = regCP_MQD_CONTROL_DEFAULT; tmp = REG_SET_FIELD(tmp, CP_MQD_CONTROL, VMID, 0); mqd->cp_mqd_control = tmp;

@@ -4108,7 +4125,7 @@ static int gfx_v11_0_compute_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_hqd_pq_base_hi = upper_32_bits(hqd_gpu_addr);

/* set up the HQD, this is similar to CP_RB0_CNTL */ - tmp = RREG32_SOC15(GC, 0, regCP_HQD_PQ_CONTROL); + tmp = regCP_HQD_PQ_CONTROL_DEFAULT; tmp = REG_SET_FIELD(tmp, CP_HQD_PQ_CONTROL, QUEUE_SIZE, (order_base_2(prop->queue_size / 4) - 1)); tmp = REG_SET_FIELD(tmp, CP_HQD_PQ_CONTROL, RPTR_BLOCK_SIZE, @@ -4134,7 +4151,7 @@ static int gfx_v11_0_compute_mqd_init(struct amdgpu_device *adev, void *m, tmp = 0; /* enable the doorbell if requested */ if (prop->use_doorbell) { - tmp = RREG32_SOC15(GC, 0, regCP_HQD_PQ_DOORBELL_CONTROL); + tmp = regCP_HQD_PQ_DOORBELL_CONTROL_DEFAULT; tmp = REG_SET_FIELD(tmp, CP_HQD_PQ_DOORBELL_CONTROL, DOORBELL_OFFSET, prop->doorbell_index);

@@ -4149,17 +4166,17 @@ static int gfx_v11_0_compute_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_hqd_pq_doorbell_control = tmp;

/* reset read and write pointers, similar to CP_RB0_WPTR/_RPTR */ - mqd->cp_hqd_pq_rptr = RREG32_SOC15(GC, 0, regCP_HQD_PQ_RPTR); + mqd->cp_hqd_pq_rptr = regCP_HQD_PQ_RPTR_DEFAULT;

/* set the vmid for the queue */ mqd->cp_hqd_vmid = 0;

- tmp = RREG32_SOC15(GC, 0, regCP_HQD_PERSISTENT_STATE); + tmp = regCP_HQD_PERSISTENT_STATE_DEFAULT; tmp = REG_SET_FIELD(tmp, CP_HQD_PERSISTENT_STATE, PRELOAD_SIZE, 0x55); mqd->cp_hqd_persistent_state = tmp;

/* set MIN_IB_AVAIL_SIZE */ - tmp = RREG32_SOC15(GC, 0, regCP_HQD_IB_CONTROL); + tmp = regCP_HQD_IB_CONTROL_DEFAULT; tmp = REG_SET_FIELD(tmp, CP_HQD_IB_CONTROL, MIN_IB_AVAIL_SIZE, 3); mqd->cp_hqd_ib_control = tmp;

From: Ryan Walklin ryan@testtoast.com

[ Upstream commit a149377c033afe6557c50892ebbfc0e8b7e2e253 ]

Add support for GPIO headphone detection with the hp-det-gpios property. In order for this to properly disable the path upon removal of headphones, the output must be labelled Headphone which is a common sink in the driver.

Describe a headphone jack and detection GPIO in the driver, check for a corresponding device tree node, and enable jack detection in a new machine init function if described.

Signed-off-by: Chris Morgan macromorgan@hotmail.com Signed-off-by: Ryan Walklin ryan@testtoast.com

-- Changelog v1..v2: - Separate DAPM changes into separate patch and add rationale.

Tested-by: Philippe Simons simons.philippe@gmail.com Link: https://patch.msgid.link/20250214220247.10810-4-ryan@testtoast.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sunxi/sun4i-codec.c | 53 +++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+)

diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c index 330bc0c09f56b..93dd88fb805dd 100644 --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -21,6 +21,7 @@ #include <linux/gpio/consumer.h>

#include <sound/core.h> +#include <sound/jack.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> @@ -235,6 +236,7 @@ struct sun4i_codec { struct clk *clk_module; struct reset_control *rst; struct gpio_desc *gpio_pa; + struct gpio_desc *gpio_hp;

/* ADC_FIFOC register is at different offset on different SoCs */ struct regmap_field *reg_adc_fifoc; @@ -1263,6 +1265,49 @@ static struct snd_soc_dai_driver dummy_cpu_dai = { .ops = &dummy_dai_ops, };

+static struct snd_soc_jack sun4i_headphone_jack; + +static struct snd_soc_jack_pin sun4i_headphone_jack_pins[] = { + { .pin = "Headphone", .mask = SND_JACK_HEADPHONE }, +}; + +static struct snd_soc_jack_gpio sun4i_headphone_jack_gpio = { + .name = "hp-det", + .report = SND_JACK_HEADPHONE, + .debounce_time = 150, +}; + +static int sun4i_codec_machine_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_card *card = rtd->card; + struct sun4i_codec *scodec = snd_soc_card_get_drvdata(card); + int ret; + + if (scodec->gpio_hp) { + ret = snd_soc_card_jack_new_pins(card, "Headphone Jack", + SND_JACK_HEADPHONE, + &sun4i_headphone_jack, + sun4i_headphone_jack_pins, + ARRAY_SIZE(sun4i_headphone_jack_pins)); + if (ret) { + dev_err(rtd->dev, + "Headphone jack creation failed: %d\n", ret); + return ret; + } + + sun4i_headphone_jack_gpio.desc = scodec->gpio_hp; + ret = snd_soc_jack_add_gpios(&sun4i_headphone_jack, 1, + &sun4i_headphone_jack_gpio); + + if (ret) { + dev_err(rtd->dev, "Headphone GPIO not added: %d\n", ret); + return ret; + } + } + + return 0; +} + static struct snd_soc_dai_link *sun4i_codec_create_link(struct device *dev, int *num_links) { @@ -1288,6 +1333,7 @@ static struct snd_soc_dai_link *sun4i_codec_create_link(struct device *dev, link->codecs->name = dev_name(dev); link->platforms->name = dev_name(dev); link->dai_fmt = SND_SOC_DAIFMT_I2S; + link->init = sun4i_codec_machine_init;

*num_links = 1;

@@ -1728,6 +1774,13 @@ static int sun4i_codec_probe(struct platform_device *pdev) return ret; }

+ scodec->gpio_hp = devm_gpiod_get_optional(&pdev->dev, "hp-det", GPIOD_IN); + if (IS_ERR(scodec->gpio_hp)) { + ret = PTR_ERR(scodec->gpio_hp); + dev_err_probe(&pdev->dev, ret, "Failed to get hp-det gpio\n"); + return ret; + } + /* reg_field setup */ scodec->reg_adc_fifoc = devm_regmap_field_alloc(&pdev->dev, scodec->regmap,

From: Eric Sandeen sandeen@redhat.com

[ Upstream commit 9cca49875997a1a7e92800a828a62bacb0f577b9 ]

Defer the readonly-vs-norecovery check until after option parsing is done so that option parsing does not require an active superblock for the test. Add a helpful message, while we're at it.

(I think could be moved back into parsing after we switch to the new mount API if desired, as the fs context will have RO state available.)

Signed-off-by: Eric Sandeen sandeen@redhat.com Reviewed-by: Chao Yu chao@kernel.org Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/super.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index 573cc4725e2e8..280debf2df4f6 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -728,10 +728,8 @@ static int parse_options(struct super_block *sb, char *options, bool is_remount) set_opt(sbi, DISABLE_ROLL_FORWARD); break; case Opt_norecovery: - /* this option mounts f2fs with ro */ + /* requires ro mount, checked in f2fs_default_check */ set_opt(sbi, NORECOVERY); - if (!f2fs_readonly(sb)) - return -EINVAL; break; case Opt_discard: if (!f2fs_hw_support_discard(sbi)) { @@ -1406,6 +1404,12 @@ static int parse_options(struct super_block *sb, char *options, bool is_remount) f2fs_err(sbi, "Allow to mount readonly mode only"); return -EROFS; } + + if (test_opt(sbi, NORECOVERY) && !f2fs_readonly(sbi->sb)) { + f2fs_err(sbi, "norecovery requires readonly mount"); + return -EINVAL; + } + return 0; }

From: Baokun Li libaokun1@huawei.com

[ Upstream commit e856f93e0fb249955f7d5efb18fe20500a9ccc6d ]

When dioread_nolock is turned on (the default), it will convert unwritten extents to written at ext4_end_io_end(), even if the data writeback fails.

It leads to the possibility that stale data may be exposed when the physical block corresponding to the file data is read-only (i.e., writes return -EIO, but reads are normal).

Therefore a new ext4_io_end->flags EXT4_IO_END_FAILED is added, which indicates that some bio write-back failed in the current ext4_io_end. When this flag is set, the unwritten to written conversion is no longer performed. Users can read the data normally until the caches are dropped, after that, the failed extents can only be read to all 0.

Signed-off-by: Baokun Li libaokun1@huawei.com Reviewed-by: Jan Kara jack@suse.cz Reviewed-by: Zhang Yi yi.zhang@huawei.com Link: https://patch.msgid.link/20250122110533.4116662-3-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/ext4.h | 3 ++- fs/ext4/page-io.c | 16 ++++++++++++++-- 2 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index bbffb76d9a904..75df7eeee50d8 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -278,7 +278,8 @@ struct ext4_system_blocks { /* * Flags for ext4_io_end->flags */ -#define EXT4_IO_END_UNWRITTEN 0x0001 +#define EXT4_IO_END_UNWRITTEN 0x0001 +#define EXT4_IO_END_FAILED 0x0002

struct ext4_io_end_vec { struct list_head list; /* list of io_end_vec */ diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c index b7b9261fec3b5..cb023922c93c8 100644 --- a/fs/ext4/page-io.c +++ b/fs/ext4/page-io.c @@ -181,14 +181,25 @@ static int ext4_end_io_end(ext4_io_end_t *io_end) "list->prev 0x%p\n", io_end, inode->i_ino, io_end->list.next, io_end->list.prev);

- io_end->handle = NULL; /* Following call will use up the handle */ - ret = ext4_convert_unwritten_io_end_vec(handle, io_end); + /* + * Do not convert the unwritten extents if data writeback fails, + * or stale data may be exposed. + */ + io_end->handle = NULL; /* Following call will use up the handle */ + if (unlikely(io_end->flag & EXT4_IO_END_FAILED)) { + ret = -EIO; + if (handle) + jbd2_journal_free_reserved(handle); + } else { + ret = ext4_convert_unwritten_io_end_vec(handle, io_end); + } if (ret < 0 && !ext4_forced_shutdown(inode->i_sb)) { ext4_msg(inode->i_sb, KERN_EMERG, "failed to convert unwritten extents to written " "extents -- potential data loss! " "(inode %lu, error %d)", inode->i_ino, ret); } + ext4_clear_io_unwritten_flag(io_end); ext4_release_io_end(io_end); return ret; @@ -344,6 +355,7 @@ static void ext4_end_bio(struct bio *bio) bio->bi_status, inode->i_ino, (unsigned long long) bi_sector >> (inode->i_blkbits - 9)); + io_end->flag |= EXT4_IO_END_FAILED; mapping_set_error(inode->i_mapping, blk_status_to_errno(bio->bi_status)); }

From: Eric Dumazet edumazet@google.com

[ Upstream commit 5f2909c6cd13564a07ae692a95457f52295c4f22 ]

With a large number of POSIX timers the search for a valid ID might cause a soft lockup on PREEMPT_NONE/VOLUNTARY kernels.

Add cond_resched() to the loop to prevent that.

[ tglx: Split out from Eric's series ]

Signed-off-by: Eric Dumazet edumazet@google.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Reviewed-by: Frederic Weisbecker frederic@kernel.org Link: https://lore.kernel.org/all/20250214135911.2037402-2-edumazet@google.com Link: https://lore.kernel.org/all/20250308155623.635612865@linutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/time/posix-timers.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/kernel/time/posix-timers.c b/kernel/time/posix-timers.c index 4576aaed13b23..896ff735034ce 100644 --- a/kernel/time/posix-timers.c +++ b/kernel/time/posix-timers.c @@ -118,6 +118,7 @@ static int posix_timer_add(struct k_itimer *timer) return id; } spin_unlock(&hash_lock); + cond_resched(); } /* POSIX return code when no timer ID could be allocated */ return -EAGAIN;

From: Jonas Karlman jonas@kwiboo.se

[ Upstream commit 247e84f66a3d1946193d739fec5dc3d69833fd00 ]

All Rockchip GMAC variants typically write to GRF regs to control e.g. interface mode, speed and MAC rx/tx delay. Newer SoCs such as RK3576 and RK3588 use a mix of GRF and peripheral GRF regs. These syscon regmaps is located with help of a rockchip,grf and rockchip,php-grf phandle.

However, validating the rockchip,grf and rockchip,php-grf syscon regmap is deferred until e.g. interface mode or speed is configured, inside the individual SoC specific operations.

Change to validate the rockchip,grf and rockchip,php-grf syscon regmap at probe time to simplify all SoC specific operations.

This should not introduce any backward compatibility issues as all GMAC nodes have been added together with a rockchip,grf phandle (and rockchip,php-grf where required) in their initial commit.

Signed-off-by: Jonas Karlman jonas@kwiboo.se Reviewed-by: Simon Horman horms@kernel.org Link: https://patch.msgid.link/20250308213720.2517944-3-jonas@kwiboo.se Reviewed-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/stmicro/stmmac/dwmac-rk.c | 21 +++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index 50073bdade46e..8f90eae937741 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c @@ -33,6 +33,7 @@ struct rk_gmac_ops { void (*set_clock_selection)(struct rk_priv_data *bsp_priv, bool input, bool enable); void (*integrated_phy_powerup)(struct rk_priv_data *bsp_priv); + bool php_grf_required; bool regs_valid; u32 regs[]; }; @@ -1263,6 +1264,7 @@ static const struct rk_gmac_ops rk3576_ops = { .set_rgmii_speed = rk3576_set_gmac_speed, .set_rmii_speed = rk3576_set_gmac_speed, .set_clock_selection = rk3576_set_clock_selection, + .php_grf_required = true, .regs_valid = true, .regs = { 0x2a220000, /* gmac0 */ @@ -1410,6 +1412,7 @@ static const struct rk_gmac_ops rk3588_ops = { .set_rgmii_speed = rk3588_set_gmac_speed, .set_rmii_speed = rk3588_set_gmac_speed, .set_clock_selection = rk3588_set_clock_selection, + .php_grf_required = true, .regs_valid = true, .regs = { 0xfe1b0000, /* gmac0 */ @@ -1830,8 +1833,22 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,

bsp_priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf"); - bsp_priv->php_grf = syscon_regmap_lookup_by_phandle(dev->of_node, - "rockchip,php-grf"); + if (IS_ERR(bsp_priv->grf)) { + dev_err_probe(dev, PTR_ERR(bsp_priv->grf), + "failed to lookup rockchip,grf\n"); + return ERR_CAST(bsp_priv->grf); + } + + if (ops->php_grf_required) { + bsp_priv->php_grf = + syscon_regmap_lookup_by_phandle(dev->of_node, + "rockchip,php-grf"); + if (IS_ERR(bsp_priv->php_grf)) { + dev_err_probe(dev, PTR_ERR(bsp_priv->php_grf), + "failed to lookup rockchip,php-grf\n"); + return ERR_CAST(bsp_priv->php_grf); + } + }

if (plat->phy_node) { bsp_priv->integrated_phy = of_property_read_bool(plat->phy_node,

From: Thomas Weißschuh thomas.weissschuh@linutronix.de

[ Upstream commit a52067c24ccf6ee4c85acffa0f155e9714f9adce ]

This reverts commit f590308536db ("timer debug: Hide kernel addresses via %pK in /proc/timer_list")

The timer list helper SEQ_printf() uses either the real seq_printf() for procfs output or vprintk() to print to the kernel log, when invoked from SysRq-q. It uses %pK for printing pointers.

In the past %pK was prefered over %p as it would not leak raw pointer values into the kernel log. Since commit ad67b74d2469 ("printk: hash addresses printed with %p") the regular %p has been improved to avoid this issue.

Furthermore, restricted pointers ("%pK") were never meant to be used through printk(). They can still unintentionally leak raw pointers or acquire sleeping looks in atomic contexts.

Switch to the regular pointer formatting which is safer, easier to reason about and sufficient here.

Signed-off-by: Thomas Weißschuh thomas.weissschuh@linutronix.de Signed-off-by: Thomas Gleixner tglx@linutronix.de Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c707046... Link: https://lore.kernel.org/all/20250311-restricted-pointers-timer-v1-1-6626b91e... Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/time/timer_list.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c index 1c311c46da507..cfbb46cc4e761 100644 --- a/kernel/time/timer_list.c +++ b/kernel/time/timer_list.c @@ -46,7 +46,7 @@ static void print_timer(struct seq_file *m, struct hrtimer *taddr, struct hrtimer *timer, int idx, u64 now) { - SEQ_printf(m, " #%d: <%pK>, %ps", idx, taddr, timer->function); + SEQ_printf(m, " #%d: <%p>, %ps", idx, taddr, timer->function); SEQ_printf(m, ", S:%02x", timer->state); SEQ_printf(m, "\n"); SEQ_printf(m, " # expires at %Lu-%Lu nsecs [in %Ld to %Ld nsecs]\n", @@ -98,7 +98,7 @@ print_active_timers(struct seq_file *m, struct hrtimer_clock_base *base, static void print_base(struct seq_file *m, struct hrtimer_clock_base *base, u64 now) { - SEQ_printf(m, " .base: %pK\n", base); + SEQ_printf(m, " .base: %p\n", base); SEQ_printf(m, " .index: %d\n", base->index);

SEQ_printf(m, " .resolution: %u nsecs\n", hrtimer_resolution);

From: Nicolas Bouchinet nicolas.bouchinet@ssi.gouv.fr

[ Upstream commit 8b6861390ffee6b8ed78b9395e3776c16fec6579 ]

nf_conntrack_max and nf_conntrack_expect_max sysctls were authorized to be written any negative value, which would then be stored in the unsigned int variables nf_conntrack_max and nf_ct_expect_max variables.

While the do_proc_dointvec_conv function is supposed to limit writing handled by proc_dointvec proc_handler to INT_MAX. Such a negative value being written in an unsigned int leads to a very high value, exceeding this limit.

Moreover, the nf_conntrack_expect_max sysctl documentation specifies the minimum value is 1.

The proc_handlers have thus been updated to proc_dointvec_minmax in order to specify the following write bounds :

* Bound nf_conntrack_max sysctl writings between SYSCTL_ZERO and SYSCTL_INT_MAX.

* Bound nf_conntrack_expect_max sysctl writings between SYSCTL_ONE and SYSCTL_INT_MAX as defined in the sysctl documentation.

With this patch applied, sysctl writes outside the defined in the bound will thus lead to a write error :

``` sysctl -w net.netfilter.nf_conntrack_expect_max=-1 sysctl: setting key "net.netfilter.nf_conntrack_expect_max": Invalid argument ```

Signed-off-by: Nicolas Bouchinet nicolas.bouchinet@ssi.gouv.fr Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conntrack_standalone.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index 7d4f0fa8b609d..3ea60ff7a6a49 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -619,7 +619,9 @@ static struct ctl_table nf_ct_sysctl_table[] = { .data = &nf_conntrack_max, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = proc_dointvec, + .proc_handler = proc_dointvec_minmax, + .extra1 = SYSCTL_ZERO, + .extra2 = SYSCTL_INT_MAX, }, [NF_SYSCTL_CT_COUNT] = { .procname = "nf_conntrack_count", @@ -655,7 +657,9 @@ static struct ctl_table nf_ct_sysctl_table[] = { .data = &nf_ct_expect_max, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = proc_dointvec, + .proc_handler = proc_dointvec_minmax, + .extra1 = SYSCTL_ONE, + .extra2 = SYSCTL_INT_MAX, }, [NF_SYSCTL_CT_ACCT] = { .procname = "nf_conntrack_acct", @@ -948,7 +952,9 @@ static struct ctl_table nf_ct_netfilter_table[] = { .data = &nf_conntrack_max, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = proc_dointvec, + .proc_handler = proc_dointvec_minmax, + .extra1 = SYSCTL_ZERO, + .extra2 = SYSCTL_INT_MAX, }, };

From: Andy Yan andy.yan@rock-chips.com

[ Upstream commit 969a38be437b68dc9e12e3c3f08911c9f9c8be73 ]

According documentation of phy_configure_opts_dp, at the configure stage, link rates should only be verify/configure when set_rate flag is set, the same applies to lanes and voltage.

So do it as the documentation says. Because voltage setting depends on the lanes, link rates set previously, so record the link rates and lanes at it's verify stage.

Signed-off-by: Andy Yan andy.yan@rock-chips.com Link: https://lore.kernel.org/r/20250312080041.524546-1-andyshrk@163.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/rockchip/phy-rockchip-usbdp.c | 87 ++++++++++++++--------- 1 file changed, 53 insertions(+), 34 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c index f5c6d264d89ed..d2021f7941e3e 100644 --- a/drivers/phy/rockchip/phy-rockchip-usbdp.c +++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c @@ -187,6 +187,8 @@ struct rk_udphy { u32 dp_aux_din_sel; bool dp_sink_hpd_sel; bool dp_sink_hpd_cfg; + unsigned int link_rate; + unsigned int lanes; u8 bw; int id;

@@ -1102,15 +1104,19 @@ static int rk_udphy_dp_phy_power_off(struct phy *phy) return 0; }

-static int rk_udphy_dp_phy_verify_link_rate(unsigned int link_rate) +/* + * Verify link rate + */ +static int rk_udphy_dp_phy_verify_link_rate(struct rk_udphy *udphy, + struct phy_configure_opts_dp *dp) { - switch (link_rate) { + switch (dp->link_rate) { case 1620: case 2700: case 5400: case 8100: + udphy->link_rate = dp->link_rate; break; - default: return -EINVAL; } @@ -1118,45 +1124,44 @@ static int rk_udphy_dp_phy_verify_link_rate(unsigned int link_rate) return 0; }

-static int rk_udphy_dp_phy_verify_config(struct rk_udphy *udphy, - struct phy_configure_opts_dp *dp) +static int rk_udphy_dp_phy_verify_lanes(struct rk_udphy *udphy, + struct phy_configure_opts_dp *dp) { - int i, ret; - - /* If changing link rate was required, verify it's supported. */ - ret = rk_udphy_dp_phy_verify_link_rate(dp->link_rate); - if (ret) - return ret; - - /* Verify lane count. */ switch (dp->lanes) { case 1: case 2: case 4: /* valid lane count. */ + udphy->lanes = dp->lanes; break;

default: return -EINVAL; }

- /* - * If changing voltages is required, check swing and pre-emphasis - * levels, per-lane. - */ - if (dp->set_voltages) { - /* Lane count verified previously. */ - for (i = 0; i < dp->lanes; i++) { - if (dp->voltage[i] > 3 || dp->pre[i] > 3) - return -EINVAL; + return 0; +}

- /* - * Sum of voltage swing and pre-emphasis levels cannot - * exceed 3. - */ - if (dp->voltage[i] + dp->pre[i] > 3) - return -EINVAL; - } +/* + * If changing voltages is required, check swing and pre-emphasis + * levels, per-lane. + */ +static int rk_udphy_dp_phy_verify_voltages(struct rk_udphy *udphy, + struct phy_configure_opts_dp *dp) +{ + int i; + + /* Lane count verified previously. */ + for (i = 0; i < udphy->lanes; i++) { + if (dp->voltage[i] > 3 || dp->pre[i] > 3) + return -EINVAL; + + /* + * Sum of voltage swing and pre-emphasis levels cannot + * exceed 3. + */ + if (dp->voltage[i] + dp->pre[i] > 3) + return -EINVAL; }

return 0; @@ -1196,9 +1201,23 @@ static int rk_udphy_dp_phy_configure(struct phy *phy, u32 i, val, lane; int ret;

- ret = rk_udphy_dp_phy_verify_config(udphy, dp); - if (ret) - return ret; + if (dp->set_rate) { + ret = rk_udphy_dp_phy_verify_link_rate(udphy, dp); + if (ret) + return ret; + } + + if (dp->set_lanes) { + ret = rk_udphy_dp_phy_verify_lanes(udphy, dp); + if (ret) + return ret; + } + + if (dp->set_voltages) { + ret = rk_udphy_dp_phy_verify_voltages(udphy, dp); + if (ret) + return ret; + }

if (dp->set_rate) { regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET, @@ -1243,9 +1262,9 @@ static int rk_udphy_dp_phy_configure(struct phy *phy, }

if (dp->set_voltages) { - for (i = 0; i < dp->lanes; i++) { + for (i = 0; i < udphy->lanes; i++) { lane = udphy->dp_lane_sel[i]; - switch (dp->link_rate) { + switch (udphy->link_rate) { case 1620: case 2700: regmap_update_bits(udphy->pma_regmap,

From: Ryan Roberts ryan.roberts@arm.com

[ Upstream commit bfb1d2b9021c21891427acc86eb848ccedeb274e ]

pud_bad() is currently defined in terms of pud_table(). Although for some configs, pud_table() is hard-coded to true i.e. when using 64K base pages or when page table levels are less than 3.

pud_bad() is intended to check that the pud is configured correctly. Hence let's open-code the same check that the full version of pud_table() uses into pud_bad(). Then it always performs the check regardless of the config.

Cc: Will Deacon will@kernel.org Cc: Ard Biesheuvel ardb@kernel.org Cc: Ryan Roberts ryan.roberts@arm.com Cc: Mark Rutland mark.rutland@arm.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ryan Roberts ryan.roberts@arm.com Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com Link: https://lore.kernel.org/r/20250221044227.1145393-7-anshuman.khandual@arm.com Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/include/asm/pgtable.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 8ee56ae999c16..5ba8376735cb0 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -806,7 +806,8 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd) pr_err("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))

#define pud_none(pud) (!pud_val(pud)) -#define pud_bad(pud) (!pud_table(pud)) +#define pud_bad(pud) ((pud_val(pud) & PUD_TYPE_MASK) != \ + PUD_TYPE_TABLE) #define pud_present(pud) pte_present(pud_pte(pud)) #ifndef __PAGETABLE_PMD_FOLDED #define pud_leaf(pud) (pud_present(pud) && !pud_table(pud))

From: Erick Shepherd erick.shepherd@ni.com

[ Upstream commit fb3bbc46c94f261b6156ee863c1b06c84cf157dc ]

Per the SD Host Controller Simplified Specification v4.20 §3.2.3, change the SD card clock parameters only after first disabling the external card clock. Doing this fixes a spurious clock pulse on Baytrail and Apollo Lake SD controllers which otherwise breaks voltage switching with a specific Swissbit SD card.

Signed-off-by: Kyle Roeschley kyle.roeschley@ni.com Signed-off-by: Brad Mouring brad.mouring@ni.com Signed-off-by: Erick Shepherd erick.shepherd@ni.com Acked-by: Adrian Hunter adrian.hunter@intel.com Link: https://lore.kernel.org/r/20250211214645.469279-1-erick.shepherd@ni.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/sdhci.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 4b91c9e966357..8ae76300d157d 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2035,10 +2035,15 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)

host->mmc->actual_clock = 0;

- sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + if (clk & SDHCI_CLOCK_CARD_EN) + sdhci_writew(host, clk & ~SDHCI_CLOCK_CARD_EN, + SDHCI_CLOCK_CONTROL);

- if (clock == 0) + if (clock == 0) { + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); return; + }

clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); sdhci_enable_clk(host, clk);

From: Avraham Stern avraham.stern@intel.com

[ Upstream commit 3ad61970ac9e164be1b09b46c01aa942e8966132 ]

When running secured ranging and the initiator is associated with the responder, the TK was not set in the range request command. Fix it.

Signed-off-by: Avraham Stern avraham.stern@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://patch.msgid.link/20250308231427.603dc31579d9.Icd19d797e56483c08dd22c... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c b/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c index 55245f913286b..2ed7a0d77ef83 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c @@ -773,7 +773,11 @@ iwl_mvm_ftm_set_secured_ranging(struct iwl_mvm *mvm, struct ieee80211_vif *vif,

target.bssid = bssid; target.cipher = cipher; + target.tk = NULL; ieee80211_iter_keys(mvm->hw, vif, iter, &target); + + if (!WARN_ON(!target.tk)) + memcpy(tk, target.tk, TK_11AZ_LEN); } else { memcpy(tk, entry->tk, sizeof(entry->tk)); }

From: Robin Murphy robin.murphy@arm.com

[ Upstream commit 3832862eb9c4dfa0e80b2522bfaedbc8a43de97d ]

At the moment, if of_iommu_configure() allocates dev->iommu itself via iommu_fwspec_init(), then suffers a DT parsing failure, it cleans up the fwspec but leaves the empty dev_iommu hanging around. So far this is benign (if a tiny bit wasteful), but we'd like to be able to reason about dev->iommu having a consistent and unambiguous lifecycle. Thus make sure that the of_iommu cleanup undoes precisely whatever it did.

Signed-off-by: Robin Murphy robin.murphy@arm.com Reviewed-by: Jason Gunthorpe jgg@nvidia.com Link: https://lore.kernel.org/r/d219663a3f23001f23d520a883ac622d70b4e642.174075326... Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/iommu-priv.h | 2 ++ drivers/iommu/iommu.c | 2 +- drivers/iommu/of_iommu.c | 6 +++++- 3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/iommu-priv.h b/drivers/iommu/iommu-priv.h index de5b54eaa8bf1..a5913c0b02a0a 100644 --- a/drivers/iommu/iommu-priv.h +++ b/drivers/iommu/iommu-priv.h @@ -17,6 +17,8 @@ static inline const struct iommu_ops *dev_iommu_ops(struct device *dev) return dev->iommu->iommu_dev->ops; }

+void dev_iommu_free(struct device *dev); + const struct iommu_ops *iommu_ops_from_fwnode(const struct fwnode_handle *fwnode);

static inline const struct iommu_ops *iommu_fwspec_ops(struct iommu_fwspec *fwspec) diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index cac3dce111689..879009adef407 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -347,7 +347,7 @@ static struct dev_iommu *dev_iommu_get(struct device *dev) return param; }

-static void dev_iommu_free(struct device *dev) +void dev_iommu_free(struct device *dev) { struct dev_iommu *param = dev->iommu;

diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c index e7a6a1611d193..e3fcab925a547 100644 --- a/drivers/iommu/of_iommu.c +++ b/drivers/iommu/of_iommu.c @@ -118,6 +118,7 @@ static void of_pci_check_device_ats(struct device *dev, struct device_node *np) int of_iommu_configure(struct device *dev, struct device_node *master_np, const u32 *id) { + bool dev_iommu_present; int err;

if (!master_np) @@ -129,6 +130,7 @@ int of_iommu_configure(struct device *dev, struct device_node *master_np, mutex_unlock(&iommu_probe_device_lock); return 0; } + dev_iommu_present = dev->iommu;

/* * We don't currently walk up the tree looking for a parent IOMMU. @@ -149,8 +151,10 @@ int of_iommu_configure(struct device *dev, struct device_node *master_np, err = of_iommu_configure_device(master_np, dev, id); }

- if (err) + if (err && dev_iommu_present) iommu_fwspec_free(dev); + else if (err && dev->iommu) + dev_iommu_free(dev); mutex_unlock(&iommu_probe_device_lock);

if (!err && dev->bus)

From: Miri Korenblit miriam.rachel.korenblit@intel.com

[ Upstream commit c7f50d0433a016d43681592836a3d484817bfb34 ]

iwl_trans_reclaim is warning if it is called when the FW is not alive. But if it is called when there is a pending restart, i.e. after a FW error, there is no need to warn, instead - return silently.

Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://patch.msgid.link/20250308231427.ba3d90b22c25.I9332506af1997faefcf0bd... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/iwl-trans.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.c b/drivers/net/wireless/intel/iwlwifi/iwl-trans.c index 3c9d91496c826..c88e4c20b505f 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.c @@ -2,7 +2,7 @@ /* * Copyright (C) 2015 Intel Mobile Communications GmbH * Copyright (C) 2016-2017 Intel Deutschland GmbH - * Copyright (C) 2019-2021, 2023-2024 Intel Corporation + * Copyright (C) 2019-2021, 2023-2025 Intel Corporation */ #include <linux/kernel.h> #include <linux/bsearch.h> @@ -420,6 +420,9 @@ IWL_EXPORT_SYMBOL(iwl_trans_tx); void iwl_trans_reclaim(struct iwl_trans *trans, int queue, int ssn, struct sk_buff_head *skbs, bool is_flush) { + if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status))) + return; + if (WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, "bad state = %d\n", trans->state)) return;

From: Johannes Berg johannes.berg@intel.com

[ Upstream commit eb29b4ffafb20281624dcd2cbb768d6f30edf600 ]

The order of actions taken for debug was implemented incorrectly. Now we implemented the dump split and do the FW reset only in the middle of the dump (rather than the FW killing itself on error.) As a result, some of the actions taken when applying the config will now crash the device, so we need to fix the order.

Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://patch.msgid.link/20250308231427.6de7fa8e63ed.I40632c48e2a67a8aca05de... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c index 08d990ba8a794..ce787326aa69d 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* - * Copyright (C) 2018-2024 Intel Corporation + * Copyright (C) 2018-2025 Intel Corporation */ #include <linux/firmware.h> #include "iwl-drv.h" @@ -1372,15 +1372,15 @@ void _iwl_dbg_tlv_time_point(struct iwl_fw_runtime *fwrt, switch (tp_id) { case IWL_FW_INI_TIME_POINT_EARLY: iwl_dbg_tlv_init_cfg(fwrt); - iwl_dbg_tlv_apply_config(fwrt, conf_list); iwl_dbg_tlv_update_drams(fwrt); iwl_dbg_tlv_tp_trigger(fwrt, sync, trig_list, tp_data, NULL); + iwl_dbg_tlv_apply_config(fwrt, conf_list); break; case IWL_FW_INI_TIME_POINT_AFTER_ALIVE: iwl_dbg_tlv_apply_buffers(fwrt); iwl_dbg_tlv_send_hcmds(fwrt, hcmd_list); - iwl_dbg_tlv_apply_config(fwrt, conf_list); iwl_dbg_tlv_tp_trigger(fwrt, sync, trig_list, tp_data, NULL); + iwl_dbg_tlv_apply_config(fwrt, conf_list); break; case IWL_FW_INI_TIME_POINT_PERIODIC: iwl_dbg_tlv_set_periodic_trigs(fwrt); @@ -1390,14 +1390,14 @@ void _iwl_dbg_tlv_time_point(struct iwl_fw_runtime *fwrt, case IWL_FW_INI_TIME_POINT_MISSED_BEACONS: case IWL_FW_INI_TIME_POINT_FW_DHC_NOTIFICATION: iwl_dbg_tlv_send_hcmds(fwrt, hcmd_list); - iwl_dbg_tlv_apply_config(fwrt, conf_list); iwl_dbg_tlv_tp_trigger(fwrt, sync, trig_list, tp_data, iwl_dbg_tlv_check_fw_pkt); + iwl_dbg_tlv_apply_config(fwrt, conf_list); break; default: iwl_dbg_tlv_send_hcmds(fwrt, hcmd_list); - iwl_dbg_tlv_apply_config(fwrt, conf_list); iwl_dbg_tlv_tp_trigger(fwrt, sync, trig_list, tp_data, NULL); + iwl_dbg_tlv_apply_config(fwrt, conf_list); break; } }

From: Emmanuel Grumbach emmanuel.grumbach@intel.com

[ Upstream commit 3ea2970b0578011ab8402ad0cff39712255f63df ]

This UEFI variable name was badly named. Fix its name and also use the right GUID to find it: we need to use the BT_WIFI (a.k.a. Common) GUID.

Signed-off-by: Emmanuel Grumbach emmanuel.grumbach@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://patch.msgid.link/20250308231426.78c998d0fa71.I2bc9d72c1dc2c4d7028f02... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/fw/uefi.c | 8 +++++--- drivers/net/wireless/intel/iwlwifi/fw/uefi.h | 4 ++-- 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/uefi.c b/drivers/net/wireless/intel/iwlwifi/fw/uefi.c index 834f7c9bb9e92..86d6286a15378 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/uefi.c +++ b/drivers/net/wireless/intel/iwlwifi/fw/uefi.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* - * Copyright(c) 2021-2024 Intel Corporation + * Copyright(c) 2021-2025 Intel Corporation */

#include "iwl-drv.h" @@ -673,8 +673,10 @@ int iwl_uefi_get_eckv(struct iwl_fw_runtime *fwrt, u32 *extl_clk) struct uefi_cnv_var_eckv *data; int ret = 0;

- data = iwl_uefi_get_verified_variable(fwrt->trans, IWL_UEFI_ECKV_NAME, - "ECKV", sizeof(*data), NULL); + data = iwl_uefi_get_verified_variable_guid(fwrt->trans, + &IWL_EFI_WIFI_BT_GUID, + IWL_UEFI_ECKV_NAME, + "ECKV", sizeof(*data), NULL); if (IS_ERR(data)) return -EINVAL;

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/uefi.h b/drivers/net/wireless/intel/iwlwifi/fw/uefi.h index e525d449e656e..c931f5cedb0b9 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/uefi.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/uefi.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* - * Copyright(c) 2021-2024 Intel Corporation + * Copyright(c) 2021-2025 Intel Corporation */ #ifndef __iwl_fw_uefi__ #define __iwl_fw_uefi__ @@ -19,7 +19,7 @@ #define IWL_UEFI_WTAS_NAME L"UefiCnvWlanWTAS" #define IWL_UEFI_SPLC_NAME L"UefiCnvWlanSPLC" #define IWL_UEFI_WRDD_NAME L"UefiCnvWlanWRDD" -#define IWL_UEFI_ECKV_NAME L"UefiCnvWlanECKV" +#define IWL_UEFI_ECKV_NAME L"UefiCnvCommonECKV" #define IWL_UEFI_DSM_NAME L"UefiCnvWlanGeneralCfg" #define IWL_UEFI_WBEM_NAME L"UefiCnvWlanWBEM" #define IWL_UEFI_PUNCTURING_NAME L"UefiCnvWlanPuncturing"

From: Ilan Peer ilan.peer@intel.com

[ Upstream commit 65bff0be9b154621b617fc2e4bd89f1e18e97cdb ]

Do address translations only between shared links. It is possible that while an non-AP MLD station and an AP MLD station have shared links, the frame is intended to be sent on a link which is not shared (for example when sending a probe response).

Signed-off-by: Ilan Peer ilan.peer@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://patch.msgid.link/20250308225541.1aa461270bb6.Ic21592e1b1634653f02b80... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/virtual/mac80211_hwsim.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/virtual/mac80211_hwsim.c b/drivers/net/wireless/virtual/mac80211_hwsim.c index 3f424f14de4ec..4a2b7c9921bc6 100644 --- a/drivers/net/wireless/virtual/mac80211_hwsim.c +++ b/drivers/net/wireless/virtual/mac80211_hwsim.c @@ -4,7 +4,7 @@ * Copyright (c) 2008, Jouni Malinen j@w1.fi * Copyright (c) 2011, Javier Lopez jlopex@gmail.com * Copyright (c) 2016 - 2017 Intel Deutschland GmbH - * Copyright (C) 2018 - 2024 Intel Corporation + * Copyright (C) 2018 - 2025 Intel Corporation */

/* @@ -1983,11 +1983,13 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw, return; }

- if (sta && sta->mlo) { - if (WARN_ON(!link_sta)) { - ieee80211_free_txskb(hw, skb); - return; - } + /* Do address translations only between shared links. It is + * possible that while an non-AP MLD station and an AP MLD + * station have shared links, the frame is intended to be sent + * on a link which is not shared (for example when sending a + * probe response). + */ + if (sta && sta->mlo && link_sta) { /* address translation to link addresses on TX */ ether_addr_copy(hdr->addr1, link_sta->addr); ether_addr_copy(hdr->addr2, bss_conf->addr);

From: Willem de Bruijn willemb@google.com

[ Upstream commit a18dfa9925b9ef6107ea3aa5814ca3c704d34a8a ]

When spanning datagram construction over multiple send calls using MSG_MORE, per datagram settings are configured on the first send.

That is when ip(6)_setup_cork stores these settings for subsequent use in __ip(6)_append_data and others.

The only flag that escaped this was dontfrag. As a result, a datagram could be constructed with df=0 on the first sendmsg, but df=1 on a next. Which is what cmsg_ip.sh does in an upcoming MSG_MORE test in the "diff" scenario.

Changing datagram conditions in the middle of constructing an skb makes this already complex code path even more convoluted. It is here unintentional. Bring this flag in line with expected sockopt/cmsg behavior.

And stop passing ipc6 to __ip6_append_data, to avoid such issues in the future. This is already the case for __ip_append_data.

inet6_cork had a 6 byte hole, so the 1B flag has no impact.

Signed-off-by: Willem de Bruijn willemb@google.com Reviewed-by: Eric Dumazet edumazet@google.com Link: https://patch.msgid.link/20250307033620.411611-3-willemdebruijn.kernel@gmail... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/ipv6.h | 1 + net/ipv6/ip6_output.c | 9 +++++---- 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index a6e2aadbb91bd..5aeeed22f35bf 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -207,6 +207,7 @@ struct inet6_cork { struct ipv6_txoptions *opt; u8 hop_limit; u8 tclass; + u8 dontfrag:1; };

/* struct ipv6_pinfo - ipv6 private area */ diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 434ddf263b88a..89a61e040e6a1 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1386,6 +1386,7 @@ static int ip6_setup_cork(struct sock *sk, struct inet_cork_full *cork, } v6_cork->hop_limit = ipc6->hlimit; v6_cork->tclass = ipc6->tclass; + v6_cork->dontfrag = ipc6->dontfrag; if (rt->dst.flags & DST_XFRM_TUNNEL) mtu = READ_ONCE(np->pmtudisc) >= IPV6_PMTUDISC_PROBE ? READ_ONCE(rt->dst.dev->mtu) : dst_mtu(&rt->dst); @@ -1417,7 +1418,7 @@ static int __ip6_append_data(struct sock *sk, int getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb), void *from, size_t length, int transhdrlen, - unsigned int flags, struct ipcm6_cookie *ipc6) + unsigned int flags) { struct sk_buff *skb, *skb_prev = NULL; struct inet_cork *cork = &cork_full->base; @@ -1471,7 +1472,7 @@ static int __ip6_append_data(struct sock *sk, if (headersize + transhdrlen > mtu) goto emsgsize;

- if (cork->length + length > mtu - headersize && ipc6->dontfrag && + if (cork->length + length > mtu - headersize && v6_cork->dontfrag && (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_ICMPV6 || sk->sk_protocol == IPPROTO_RAW)) { @@ -1843,7 +1844,7 @@ int ip6_append_data(struct sock *sk,

return __ip6_append_data(sk, &sk->sk_write_queue, &inet->cork, &np->cork, sk_page_frag(sk), getfrag, - from, length, transhdrlen, flags, ipc6); + from, length, transhdrlen, flags); } EXPORT_SYMBOL_GPL(ip6_append_data);

@@ -2048,7 +2049,7 @@ struct sk_buff *ip6_make_skb(struct sock *sk, err = __ip6_append_data(sk, &queue, cork, &v6_cork, &current->task_frag, getfrag, from, length + exthdrlen, transhdrlen + exthdrlen, - flags, ipc6); + flags); if (err) { __ip6_flush_pending_frames(sk, &queue, cork, &v6_cork); return ERR_PTR(err);

From: Zhikai Zhai zhikai.zhai@amd.com

[ Upstream commit d3069feecdb5542604d29b59acfd1fd213bad95b ]

[WHY] In some cases the remain de-tile buffer segments will be greater than zero if we don't add the non-top pipe to calculate, at this time the override de-tile buffer size will be valid and used. But it makes the de-tile buffer segments used finally for all of pipes exceed the maximum.

[HOW] Add the non-top pipe to calculate the remain de-tile buffer segments. Don't set override size to use the average according to pipe count if the value exceed the maximum.

Reviewed-by: Charlene Liu charlene.liu@amd.com Signed-off-by: Zhikai Zhai zhikai.zhai@amd.com Signed-off-by: Tom Chung chiahsuan.chung@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../dc/resource/dcn315/dcn315_resource.c | 42 +++++++++---------- 1 file changed, 20 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn315/dcn315_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn315/dcn315_resource.c index f2ce687c0e03c..9cb72805b8d1a 100644 --- a/drivers/gpu/drm/amd/display/dc/resource/dcn315/dcn315_resource.c +++ b/drivers/gpu/drm/amd/display/dc/resource/dcn315/dcn315_resource.c @@ -1699,7 +1699,7 @@ static int dcn315_populate_dml_pipes_from_context( pipes[pipe_cnt].dout.dsc_input_bpc = 0; DC_FP_START(); dcn31_zero_pipe_dcc_fraction(pipes, pipe_cnt); - if (pixel_rate_crb && !pipe->top_pipe && !pipe->prev_odm_pipe) { + if (pixel_rate_crb) { int bpp = source_format_to_bpp(pipes[pipe_cnt].pipe.src.source_format); /* Ceil to crb segment size */ int approx_det_segs_required_for_pstate = dcn_get_approx_det_segs_required_for_pstate( @@ -1756,28 +1756,26 @@ static int dcn315_populate_dml_pipes_from_context( continue; }

- if (!pipe->top_pipe && !pipe->prev_odm_pipe) { - bool split_required = pipe->stream->timing.pix_clk_100hz >= dcn_get_max_non_odm_pix_rate_100hz(&dc->dml.soc) - || (pipe->plane_state && pipe->plane_state->src_rect.width > 5120); - - if (remaining_det_segs > MIN_RESERVED_DET_SEGS && crb_pipes != 0) - pipes[pipe_cnt].pipe.src.det_size_override += (remaining_det_segs - MIN_RESERVED_DET_SEGS) / crb_pipes + - (crb_idx < (remaining_det_segs - MIN_RESERVED_DET_SEGS) % crb_pipes ? 1 : 0); - if (pipes[pipe_cnt].pipe.src.det_size_override > 2 * DCN3_15_MAX_DET_SEGS) { - /* Clamp to 2 pipe split max det segments */ - remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override - 2 * (DCN3_15_MAX_DET_SEGS); - pipes[pipe_cnt].pipe.src.det_size_override = 2 * DCN3_15_MAX_DET_SEGS; - } - if (pipes[pipe_cnt].pipe.src.det_size_override > DCN3_15_MAX_DET_SEGS || split_required) { - /* If we are splitting we must have an even number of segments */ - remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override % 2; - pipes[pipe_cnt].pipe.src.det_size_override -= pipes[pipe_cnt].pipe.src.det_size_override % 2; - } - /* Convert segments into size for DML use */ - pipes[pipe_cnt].pipe.src.det_size_override *= DCN3_15_CRB_SEGMENT_SIZE_KB; - - crb_idx++; + bool split_required = pipe->stream->timing.pix_clk_100hz >= dcn_get_max_non_odm_pix_rate_100hz(&dc->dml.soc) + || (pipe->plane_state && pipe->plane_state->src_rect.width > 5120); + + if (remaining_det_segs > MIN_RESERVED_DET_SEGS && crb_pipes != 0) + pipes[pipe_cnt].pipe.src.det_size_override += (remaining_det_segs - MIN_RESERVED_DET_SEGS) / crb_pipes + + (crb_idx < (remaining_det_segs - MIN_RESERVED_DET_SEGS) % crb_pipes ? 1 : 0); + if (pipes[pipe_cnt].pipe.src.det_size_override > 2 * DCN3_15_MAX_DET_SEGS) { + /* Clamp to 2 pipe split max det segments */ + remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override - 2 * (DCN3_15_MAX_DET_SEGS); + pipes[pipe_cnt].pipe.src.det_size_override = 2 * DCN3_15_MAX_DET_SEGS; + } + if (pipes[pipe_cnt].pipe.src.det_size_override > DCN3_15_MAX_DET_SEGS || split_required) { + /* If we are splitting we must have an even number of segments */ + remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override % 2; + pipes[pipe_cnt].pipe.src.det_size_override -= pipes[pipe_cnt].pipe.src.det_size_override % 2; } + /* Convert segments into size for DML use */ + pipes[pipe_cnt].pipe.src.det_size_override *= DCN3_15_CRB_SEGMENT_SIZE_KB; + + crb_idx++; pipe_cnt++; } }

From: Leon Huang Leon.Huang1@amd.com

[ Upstream commit 0d9cabc8f591ea1cd97c071b853b75b155c13259 ]

[Why] When switching between PSR/Replay, the DPCD config of previous mode is not cleared, resulting in unexpected behavior in TCON.

[How] Initialize the DPCD in setup function

Reviewed-by: Robin Chen robin.chen@amd.com Signed-off-by: Leon Huang Leon.Huang1@amd.com Signed-off-by: Tom Chung chiahsuan.chung@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../link/protocols/link_edp_panel_control.c | 25 ++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c index 3aa05a2be6c09..fa642f4b88c2d 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c @@ -674,6 +674,18 @@ bool edp_setup_psr(struct dc_link *link, if (!link) return false;

+ //Clear PSR cfg + memset(&psr_configuration, 0, sizeof(psr_configuration)); + dm_helpers_dp_write_dpcd( + link->ctx, + link, + DP_PSR_EN_CFG, + &psr_configuration.raw, + sizeof(psr_configuration.raw)); + + if (link->psr_settings.psr_version == DC_PSR_VERSION_UNSUPPORTED) + return false; + dc = link->ctx->dc; dmcu = dc->res_pool->dmcu; psr = dc->res_pool->psr; @@ -684,9 +696,6 @@ bool edp_setup_psr(struct dc_link *link, if (!dc_get_edp_link_panel_inst(dc, link, &panel_inst)) return false;

- - memset(&psr_configuration, 0, sizeof(psr_configuration)); - psr_configuration.bits.ENABLE = 1; psr_configuration.bits.CRC_VERIFICATION = 1; psr_configuration.bits.FRAME_CAPTURE_INDICATION = @@ -950,6 +959,16 @@ bool edp_setup_replay(struct dc_link *link, const struct dc_stream_state *stream if (!link) return false;

+ //Clear Replay config + dm_helpers_dp_write_dpcd(link->ctx, link, + DP_SINK_PR_ENABLE_AND_CONFIGURATION, + (uint8_t *)&(replay_config.raw), sizeof(uint8_t)); + + if (!(link->replay_settings.config.replay_supported)) + return false; + + link->replay_settings.config.replay_error_status.raw = 0; + dc = link->ctx->dc;

replay = dc->res_pool->replay;

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

[ Upstream commit 09965a142078080fe7807bab0f6f1890cb5987a4 ]

Commit 2545c1c948a6 ("auxdisplay: Move hwidth and bwidth to struct hd44780_common") makes charlcd_alloc() argument-less effectively dropping the single allocation for the struct charlcd_priv object along with the driver specific one. Restore that behaviour here.

Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Geert Uytterhoeven geert@linux-m68k.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/auxdisplay/charlcd.c | 5 +++-- drivers/auxdisplay/charlcd.h | 5 +++-- drivers/auxdisplay/hd44780.c | 2 +- drivers/auxdisplay/lcd2s.c | 2 +- drivers/auxdisplay/panel.c | 2 +- 5 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/auxdisplay/charlcd.c b/drivers/auxdisplay/charlcd.c index 19b619376d48b..09020bb8ad15f 100644 --- a/drivers/auxdisplay/charlcd.c +++ b/drivers/auxdisplay/charlcd.c @@ -595,18 +595,19 @@ static int charlcd_init(struct charlcd *lcd) return 0; }

-struct charlcd *charlcd_alloc(void) +struct charlcd *charlcd_alloc(unsigned int drvdata_size) { struct charlcd_priv *priv; struct charlcd *lcd;

- priv = kzalloc(sizeof(*priv), GFP_KERNEL); + priv = kzalloc(sizeof(*priv) + drvdata_size, GFP_KERNEL); if (!priv) return NULL;

priv->esc_seq.len = -1;

lcd = &priv->lcd; + lcd->drvdata = priv->drvdata;

return lcd; } diff --git a/drivers/auxdisplay/charlcd.h b/drivers/auxdisplay/charlcd.h index 4d4287209d04c..d10b89740bcae 100644 --- a/drivers/auxdisplay/charlcd.h +++ b/drivers/auxdisplay/charlcd.h @@ -51,7 +51,7 @@ struct charlcd { unsigned long y; } addr;

- void *drvdata; + void *drvdata; /* Set by charlcd_alloc() */ };

/** @@ -95,7 +95,8 @@ struct charlcd_ops { };

void charlcd_backlight(struct charlcd *lcd, enum charlcd_onoff on); -struct charlcd *charlcd_alloc(void); + +struct charlcd *charlcd_alloc(unsigned int drvdata_size); void charlcd_free(struct charlcd *lcd);

int charlcd_register(struct charlcd *lcd); diff --git a/drivers/auxdisplay/hd44780.c b/drivers/auxdisplay/hd44780.c index 41807ce363399..9428f951c9bf2 100644 --- a/drivers/auxdisplay/hd44780.c +++ b/drivers/auxdisplay/hd44780.c @@ -226,7 +226,7 @@ static int hd44780_probe(struct platform_device *pdev) if (!hdc) return -ENOMEM;

- lcd = charlcd_alloc(); + lcd = charlcd_alloc(0); if (!lcd) goto fail1;

diff --git a/drivers/auxdisplay/lcd2s.c b/drivers/auxdisplay/lcd2s.c index 6422be0dfe20e..0ecf6a9469f24 100644 --- a/drivers/auxdisplay/lcd2s.c +++ b/drivers/auxdisplay/lcd2s.c @@ -307,7 +307,7 @@ static int lcd2s_i2c_probe(struct i2c_client *i2c) if (err < 0) return err;

- lcd = charlcd_alloc(); + lcd = charlcd_alloc(0); if (!lcd) return -ENOMEM;

diff --git a/drivers/auxdisplay/panel.c b/drivers/auxdisplay/panel.c index 6dc8798d01f98..4da142692d55f 100644 --- a/drivers/auxdisplay/panel.c +++ b/drivers/auxdisplay/panel.c @@ -835,7 +835,7 @@ static void lcd_init(void) if (!hdc) return;

- charlcd = charlcd_alloc(); + charlcd = charlcd_alloc(0); if (!charlcd) { kfree(hdc); return;

From: Coly Li colyli@kernel.org

[ Upstream commit 7e76336e14de9a2b67af96012ddd46c5676cf340 ]

In _badblocks_check(), there are lines of code like this, 1246 sectors -= len; [snipped] 1251 WARN_ON(sectors < 0);

The WARN_ON() at line 1257 doesn't make sense because sectors is unsigned long long type and never to be <0.

Fix it by checking directly checking whether sectors is less than len.

Reported-by: Dan Carpenter dan.carpenter@linaro.org Signed-off-by: Coly Li colyli@kernel.org Reviewed-by: Yu Kuai yukuai3@huawei.com Link: https://lore.kernel.org/r/20250309160556.42854-1-colyli@kernel.org Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/badblocks.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/block/badblocks.c b/block/badblocks.c index db4ec8b9b2a8c..a9709771a1015 100644 --- a/block/badblocks.c +++ b/block/badblocks.c @@ -1349,14 +1349,15 @@ static int _badblocks_check(struct badblocks *bb, sector_t s, int sectors, len = sectors;

update_sectors: + /* This situation should never happen */ + WARN_ON(sectors < len); + s += len; sectors -= len;

if (sectors > 0) goto re_check;

- WARN_ON(sectors < 0); - if (unacked_badblocks > 0) rv = -1; else if (acked_badblocks > 0)

From: Lu Baolu baolu.lu@linux.intel.com

[ Upstream commit 5518f239aff1baf772c5748da3add7243c5fb5df ]

Device ATS is currently enabled when a domain is attached to the device and disabled when the domain is detached. This creates a limitation: when the IOMMU is operating in scalable mode and IOPF is enabled, the device's domain cannot be changed.

The previous code enables ATS when a domain is set to a device's RID and disables it during RID domain switch. So, if a PASID is set with a domain requiring PRI, ATS should remain enabled until the domain is removed. During the PASID domain's lifecycle, if the RID's domain changes, PRI will be disrupted because it depends on ATS, which is disabled when the blocking domain is set for the device's RID.

Remove this limitation by moving ATS enablement to the device probe path.

Signed-off-by: Lu Baolu baolu.lu@linux.intel.com Reviewed-by: Kevin Tian kevin.tian@intel.com Tested-by: Zhangfei Gao zhangfei.gao@linaro.org Link: https://lore.kernel.org/r/20250228092631.3425464-5-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/intel/iommu.c | 51 ++++++++++++++++++++----------------- 1 file changed, 27 insertions(+), 24 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 038a66388564a..5069a628deea1 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -1284,32 +1284,28 @@ static bool dev_needs_extra_dtlb_flush(struct pci_dev *pdev) return true; }

-static void iommu_enable_pci_caps(struct device_domain_info *info) +static void iommu_enable_pci_ats(struct device_domain_info *info) { struct pci_dev *pdev;

- if (!dev_is_pci(info->dev)) + if (!info->ats_supported) return;

pdev = to_pci_dev(info->dev); - if (info->ats_supported && pci_ats_page_aligned(pdev) && - !pci_enable_ats(pdev, VTD_PAGE_SHIFT)) + if (!pci_ats_page_aligned(pdev)) + return; + + if (!pci_enable_ats(pdev, VTD_PAGE_SHIFT)) info->ats_enabled = 1; }

-static void iommu_disable_pci_caps(struct device_domain_info *info) +static void iommu_disable_pci_ats(struct device_domain_info *info) { - struct pci_dev *pdev; - - if (!dev_is_pci(info->dev)) + if (!info->ats_enabled) return;

- pdev = to_pci_dev(info->dev); - - if (info->ats_enabled) { - pci_disable_ats(pdev); - info->ats_enabled = 0; - } + pci_disable_ats(to_pci_dev(info->dev)); + info->ats_enabled = 0; }

static void intel_flush_iotlb_all(struct iommu_domain *domain) @@ -1722,12 +1718,19 @@ domain_context_mapping(struct dmar_domain *domain, struct device *dev) struct device_domain_info *info = dev_iommu_priv_get(dev); struct intel_iommu *iommu = info->iommu; u8 bus = info->bus, devfn = info->devfn; + int ret;

if (!dev_is_pci(dev)) return domain_context_mapping_one(domain, iommu, bus, devfn);

- return pci_for_each_dma_alias(to_pci_dev(dev), - domain_context_mapping_cb, domain); + ret = pci_for_each_dma_alias(to_pci_dev(dev), + domain_context_mapping_cb, domain); + if (ret) + return ret; + + iommu_enable_pci_ats(info); + + return 0; }

/* Return largest possible superpage level for a given mapping */ @@ -1987,8 +1990,6 @@ static int dmar_domain_attach_device(struct dmar_domain *domain, if (ret) goto out_block_translation;

- iommu_enable_pci_caps(info); - ret = cache_tag_assign_domain(domain, dev, IOMMU_NO_PASID); if (ret) goto out_block_translation; @@ -3368,6 +3369,7 @@ static void domain_context_clear(struct device_domain_info *info)

pci_for_each_dma_alias(to_pci_dev(info->dev), &domain_context_clear_one_cb, info); + iommu_disable_pci_ats(info); }

/* @@ -3384,7 +3386,6 @@ void device_block_translation(struct device *dev) if (info->domain) cache_tag_unassign_domain(info->domain, dev, IOMMU_NO_PASID);

- iommu_disable_pci_caps(info); if (!dev_is_real_dma_subdevice(dev)) { if (sm_supported(iommu)) intel_pasid_tear_down_entry(iommu, dev, @@ -3964,6 +3965,9 @@ static struct iommu_device *intel_iommu_probe_device(struct device *dev) !pci_enable_pasid(pdev, info->pasid_supported & ~1)) info->pasid_enabled = 1;

+ if (sm_supported(iommu)) + iommu_enable_pci_ats(info); + return &iommu->iommu; free_table: intel_pasid_free_table(dev); @@ -3980,6 +3984,8 @@ static void intel_iommu_release_device(struct device *dev) struct device_domain_info *info = dev_iommu_priv_get(dev); struct intel_iommu *iommu = info->iommu;

+ iommu_disable_pci_ats(info); + if (info->pasid_enabled) { pci_disable_pasid(to_pci_dev(dev)); info->pasid_enabled = 0; @@ -4581,13 +4587,10 @@ static int identity_domain_attach_dev(struct iommu_domain *domain, struct device if (dev_is_real_dma_subdevice(dev)) return 0;

- if (sm_supported(iommu)) { + if (sm_supported(iommu)) ret = intel_pasid_setup_pass_through(iommu, dev, IOMMU_NO_PASID); - if (!ret) - iommu_enable_pci_caps(info); - } else { + else ret = device_setup_pass_through(dev); - }

return ret; }

From: Aaron Kling luceoscutum@gmail.com

[ Upstream commit be4ae8c19492cd6d5de61ccb34ffb3f5ede5eec8 ]

This functionally brings tegra186 in line with tegra210 and tegra194, sharing a cpufreq policy between all cores in a cluster.

Reviewed-by: Sumit Gupta sumitg@nvidia.com Acked-by: Thierry Reding treding@nvidia.com Signed-off-by: Aaron Kling webgeek1234@gmail.com Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/cpufreq/tegra186-cpufreq.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/drivers/cpufreq/tegra186-cpufreq.c b/drivers/cpufreq/tegra186-cpufreq.c index 7b8fcfa55038b..4e5b6f9a56d1b 100644 --- a/drivers/cpufreq/tegra186-cpufreq.c +++ b/drivers/cpufreq/tegra186-cpufreq.c @@ -73,11 +73,18 @@ static int tegra186_cpufreq_init(struct cpufreq_policy *policy) { struct tegra186_cpufreq_data *data = cpufreq_get_driver_data(); unsigned int cluster = data->cpus[policy->cpu].bpmp_cluster_id; + u32 cpu;

policy->freq_table = data->clusters[cluster].table; policy->cpuinfo.transition_latency = 300 * 1000; policy->driver_data = NULL;

+ /* set same policy for all cpus in a cluster */ + for (cpu = 0; cpu < ARRAY_SIZE(tegra186_cpus); cpu++) { + if (data->cpus[cpu].bpmp_cluster_id == cluster) + cpumask_set_cpu(cpu, policy->cpus); + } + return 0; }

From: Christian Bruel christian.bruel@foss.st.com

[ Upstream commit 934e9d137d937706004c325fa1474f9e3f1ba10a ]

Fix a kernel oops found while testing the stm32_pcie Endpoint driver with handling of PERST# deassertion:

During EP initialization, pci_epf_test_alloc_space() allocates all BARs, which are further freed if epc_set_bar() fails (for instance, due to no free inbound window).

However, when pci_epc_set_bar() fails, the error path:

pci_epc_set_bar() -> pci_epf_free_space()

does not clear the previous assignment to epf_test->reg[bar].

Then, if the host reboots, the PERST# deassertion restarts the BAR allocation sequence with the same allocation failure (no free inbound window), creating a double free situation since epf_test->reg[bar] was deallocated and is still non-NULL.

Thus, make sure that pci_epf_alloc_space() and pci_epf_free_space() invocations are symmetric, and as such, set epf_test->reg[bar] to NULL when memory is freed.

Reviewed-by: Niklas Cassel cassel@kernel.org Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Signed-off-by: Christian Bruel christian.bruel@foss.st.com Link: https://lore.kernel.org/r/20250124123043.96112-1-christian.bruel@foss.st.com [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński kwilczynski@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/endpoint/functions/pci-epf-test.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c index 14b4c68ab4e1a..21aa3709e2577 100644 --- a/drivers/pci/endpoint/functions/pci-epf-test.c +++ b/drivers/pci/endpoint/functions/pci-epf-test.c @@ -703,6 +703,7 @@ static int pci_epf_test_set_bar(struct pci_epf *epf) if (ret) { pci_epf_free_space(epf, epf_test->reg[bar], bar, PRIMARY_INTERFACE); + epf_test->reg[bar] = NULL; dev_err(dev, "Failed to set BAR%d\n", bar); if (bar == test_reg_bar) return ret; @@ -878,6 +879,7 @@ static void pci_epf_test_free_space(struct pci_epf *epf)

pci_epf_free_space(epf, epf_test->reg[bar], bar, PRIMARY_INTERFACE); + epf_test->reg[bar] = NULL; } }

From: Herbert Xu herbert@gondor.apana.org.au

[ Upstream commit cc47f07234f72cbd8e2c973cdbf2a6730660a463 ]