6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Danny Wang danny.wang@amd.com

[ Upstream commit bd00b29b5f236dce677089319176dee5872b5a7a ]

[Why&How] Vtotal is not applied to HW when handling vsync interrupt. Make sure vtotal is aligned before enable replay.

Reviewed-by: Anthony Koo anthony.koo@amd.com Reviewed-by: Robin Chen robin.chen@amd.com Signed-off-by: Danny Wang danny.wang@amd.com Signed-off-by: Zhongwei Zhang Zhongwei.Zhang@amd.com Signed-off-by: Tom Chung chiahsuan.chung@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Stable-dep-of: 874697e12793 ("drm/amd/display: Defer BW-optimization-blocked DRR adjustments") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc.c | 9 +++++++-- .../gpu/drm/amd/display/dc/core/dc_hw_sequencer.c | 15 +++++++++++++++ drivers/gpu/drm/amd/display/dc/dc_hw_types.h | 1 + .../drm/amd/display/dc/hwss/dce110/dce110_hwseq.c | 7 ++----- .../drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c | 7 ++----- .../drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 8 ++------ .../drm/amd/display/dc/hwss/dcn31/dcn31_hwseq.c | 4 +--- .../drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c | 3 +-- .../drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c | 10 +++------- .../gpu/drm/amd/display/dc/hwss/hw_sequencer.h | 6 ++++++ 10 files changed, 40 insertions(+), 30 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 216b525bd75e7..3392746f1d420 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -452,6 +452,7 @@ bool dc_stream_adjust_vmin_vmax(struct dc *dc,

if (dc->caps.max_v_total != 0 && (adjust->v_total_max > dc->caps.max_v_total || adjust->v_total_min > dc->caps.max_v_total)) { + stream->adjust.timing_adjust_pending = false; if (adjust->allow_otg_v_count_halt) return set_long_vtotal(dc, stream, adjust); else @@ -465,7 +466,7 @@ bool dc_stream_adjust_vmin_vmax(struct dc *dc, dc->hwss.set_drr(&pipe, 1, *adjust); - + stream->adjust.timing_adjust_pending = false; return true; } } @@ -2975,8 +2976,12 @@ static void copy_stream_update_to_stream(struct dc *dc, if (update->vrr_active_fixed) stream->vrr_active_fixed = *update->vrr_active_fixed;

- if (update->crtc_timing_adjust) + if (update->crtc_timing_adjust) { + if (stream->adjust.v_total_min != update->crtc_timing_adjust->v_total_min || + stream->adjust.v_total_max != update->crtc_timing_adjust->v_total_max) + stream->adjust.timing_adjust_pending = true; stream->adjust = *update->crtc_timing_adjust; + }

if (update->dpms_off) stream->dpms_off = *update->dpms_off; diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c index bb766c2a74176..fdcba960e1e6f 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c @@ -554,6 +554,21 @@ void set_p_state_switch_method( } }

+void set_drr_and_clear_adjust_pending( + struct pipe_ctx *pipe_ctx, + struct dc_stream_state *stream, + struct drr_params *params) +{ + /* params can be null.*/ + if (pipe_ctx && pipe_ctx->stream_res.tg && + pipe_ctx->stream_res.tg->funcs->set_drr) + pipe_ctx->stream_res.tg->funcs->set_drr( + pipe_ctx->stream_res.tg, params); + + if (stream) + stream->adjust.timing_adjust_pending = false; +} + void get_fams2_visual_confirm_color( struct dc *dc, struct dc_state *context, diff --git a/drivers/gpu/drm/amd/display/dc/dc_hw_types.h b/drivers/gpu/drm/amd/display/dc/dc_hw_types.h index c10567ec1c819..0ded4bc7825b0 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_hw_types.h +++ b/drivers/gpu/drm/amd/display/dc/dc_hw_types.h @@ -1000,6 +1000,7 @@ struct dc_crtc_timing_adjust { uint32_t v_total_mid; uint32_t v_total_mid_frame_num; uint32_t allow_otg_v_count_halt; + uint8_t timing_adjust_pending; };

diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c index 4fbed0298adfa..1e76524d116dc 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c @@ -1653,9 +1653,7 @@ enum dc_status dce110_apply_single_controller_ctx_to_hw(

params.vertical_total_min = stream->adjust.v_total_min; params.vertical_total_max = stream->adjust.v_total_max; - if (pipe_ctx->stream_res.tg->funcs->set_drr) - pipe_ctx->stream_res.tg->funcs->set_drr( - pipe_ctx->stream_res.tg, &params); + set_drr_and_clear_adjust_pending(pipe_ctx, stream, &params);

// DRR should set trigger event to monitor surface update event if (stream->adjust.v_total_min != 0 && stream->adjust.v_total_max != 0) @@ -2103,8 +2101,7 @@ static void set_drr(struct pipe_ctx **pipe_ctx, struct timing_generator *tg = pipe_ctx[i]->stream_res.tg;

if ((tg != NULL) && tg->funcs) { - if (tg->funcs->set_drr) - tg->funcs->set_drr(tg, &params); + set_drr_and_clear_adjust_pending(pipe_ctx[i], pipe_ctx[i]->stream, &params); if (adjust.v_total_max != 0 && adjust.v_total_min != 0) if (tg->funcs->set_static_screen_control) tg->funcs->set_static_screen_control( diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c index d725af14af371..00be0b26689d3 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c @@ -1112,9 +1112,7 @@ static void dcn10_reset_back_end_for_pipe( pipe_ctx->stream_res.tg->funcs->disable_crtc(pipe_ctx->stream_res.tg);

pipe_ctx->stream_res.tg->funcs->enable_optc_clock(pipe_ctx->stream_res.tg, false); - if (pipe_ctx->stream_res.tg->funcs->set_drr) - pipe_ctx->stream_res.tg->funcs->set_drr( - pipe_ctx->stream_res.tg, NULL); + set_drr_and_clear_adjust_pending(pipe_ctx, pipe_ctx->stream, NULL); if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal)) pipe_ctx->stream->link->phy_state.symclk_ref_cnts.otg = 0; } @@ -3217,8 +3215,7 @@ void dcn10_set_drr(struct pipe_ctx **pipe_ctx, struct timing_generator *tg = pipe_ctx[i]->stream_res.tg;

if ((tg != NULL) && tg->funcs) { - if (tg->funcs->set_drr) - tg->funcs->set_drr(tg, &params); + set_drr_and_clear_adjust_pending(pipe_ctx[i], pipe_ctx[i]->stream, &params); if (adjust.v_total_max != 0 && adjust.v_total_min != 0) if (tg->funcs->set_static_screen_control) tg->funcs->set_static_screen_control( diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c index f5f1ccd8303cf..9c5cdb3b80b5d 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c @@ -952,9 +952,7 @@ enum dc_status dcn20_enable_stream_timing( params.vertical_total_max = stream->adjust.v_total_max; params.vertical_total_mid = stream->adjust.v_total_mid; params.vertical_total_mid_frame_num = stream->adjust.v_total_mid_frame_num; - if (pipe_ctx->stream_res.tg->funcs->set_drr) - pipe_ctx->stream_res.tg->funcs->set_drr( - pipe_ctx->stream_res.tg, &params); + set_drr_and_clear_adjust_pending(pipe_ctx, stream, &params);

// DRR should set trigger event to monitor surface update event if (stream->adjust.v_total_min != 0 && stream->adjust.v_total_max != 0) @@ -2822,9 +2820,7 @@ void dcn20_reset_back_end_for_pipe( pipe_ctx->stream_res.tg->funcs->set_odm_bypass( pipe_ctx->stream_res.tg, &pipe_ctx->stream->timing);

- if (pipe_ctx->stream_res.tg->funcs->set_drr) - pipe_ctx->stream_res.tg->funcs->set_drr( - pipe_ctx->stream_res.tg, NULL); + set_drr_and_clear_adjust_pending(pipe_ctx, pipe_ctx->stream, NULL); /* TODO - convert symclk_ref_cnts for otg to a bit map to solve * the case where the same symclk is shared across multiple otg * instances diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn31/dcn31_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn31/dcn31_hwseq.c index 3d4b31bd99469..9aa925a0b3b43 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn31/dcn31_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn31/dcn31_hwseq.c @@ -528,9 +528,7 @@ static void dcn31_reset_back_end_for_pipe( if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal)) pipe_ctx->stream->link->phy_state.symclk_ref_cnts.otg = 0;

- if (pipe_ctx->stream_res.tg->funcs->set_drr) - pipe_ctx->stream_res.tg->funcs->set_drr( - pipe_ctx->stream_res.tg, NULL); + set_drr_and_clear_adjust_pending(pipe_ctx, pipe_ctx->stream, NULL);

link = pipe_ctx->stream->link; /* DPMS may already disable or */ diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c index 38755ca771401..ca446e08f6a27 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c @@ -1452,8 +1452,7 @@ void dcn35_set_drr(struct pipe_ctx **pipe_ctx, num_frames = 2 * (frame_rate % 60); } } - if (tg->funcs->set_drr) - tg->funcs->set_drr(tg, &params); + set_drr_and_clear_adjust_pending(pipe_ctx[i], pipe_ctx[i]->stream, &params); if (adjust.v_total_max != 0 && adjust.v_total_min != 0) if (tg->funcs->set_static_screen_control) tg->funcs->set_static_screen_control( diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c index b6b333a2461f8..3279f347660cb 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c @@ -902,10 +902,7 @@ enum dc_status dcn401_enable_stream_timing( }

hws->funcs.wait_for_blank_complete(pipe_ctx->stream_res.opp); - - if (pipe_ctx->stream_res.tg->funcs->set_drr) - pipe_ctx->stream_res.tg->funcs->set_drr( - pipe_ctx->stream_res.tg, &params); + set_drr_and_clear_adjust_pending(pipe_ctx, stream, &params);

/* Event triggers and num frames initialized for DRR, but can be * later updated for PSR use. Note DRR trigger events are generated @@ -1835,9 +1832,8 @@ void dcn401_reset_back_end_for_pipe( pipe_ctx->stream_res.tg->funcs->set_odm_bypass( pipe_ctx->stream_res.tg, &pipe_ctx->stream->timing);

- if (pipe_ctx->stream_res.tg->funcs->set_drr) - pipe_ctx->stream_res.tg->funcs->set_drr( - pipe_ctx->stream_res.tg, NULL); + set_drr_and_clear_adjust_pending(pipe_ctx, pipe_ctx->stream, NULL); + /* TODO - convert symclk_ref_cnts for otg to a bit map to solve * the case where the same symclk is shared across multiple otg * instances diff --git a/drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer.h b/drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer.h index ac92056256233..9ae6259f2db17 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer.h +++ b/drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer.h @@ -46,6 +46,7 @@ struct dce_hwseq; struct link_resource; struct dc_dmub_cmd; struct pg_block_update; +struct drr_params;

struct subvp_pipe_control_lock_fast_params { struct dc *dc; @@ -509,6 +510,11 @@ void set_p_state_switch_method( struct dc_state *context, struct pipe_ctx *pipe_ctx);

+void set_drr_and_clear_adjust_pending( + struct pipe_ctx *pipe_ctx, + struct dc_stream_state *stream, + struct drr_params *params); + void hwss_execute_sequence(struct dc *dc, struct block_sequence block_sequence[], int num_steps);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: John Olender john.olender@gmail.com

[ Upstream commit 874697e127931bf50a37ce9d96ee80f3a08a0c38 ]

[Why & How] Instead of dropping DRR updates, defer them. This fixes issues where monitor continues to see incorrect refresh rate after VRR was turned off by userspace.

Fixes: 32953485c558 ("drm/amd/display: Do not update DRR while BW optimizations pending") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3546 Reviewed-by: Sun peng Li sunpeng.li@amd.com Signed-off-by: John Olender john.olender@gmail.com Signed-off-by: Aurabindo Pillai aurabindo.pillai@amd.com Signed-off-by: Ray Wu ray.wu@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com (cherry picked from commit 53761b7ecd83e6fbb9f2206f8c980a6aa308c844) Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 ++ drivers/gpu/drm/amd/display/dc/core/dc.c | 10 +++++++--- 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index ff33760aa4fae..17c03b89abb31 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -365,6 +365,8 @@ get_crtc_by_otg_inst(struct amdgpu_device *adev, static inline bool is_dc_timing_adjust_needed(struct dm_crtc_state *old_state, struct dm_crtc_state *new_state) { + if (new_state->stream->adjust.timing_adjust_pending) + return true; if (new_state->freesync_config.state == VRR_STATE_ACTIVE_FIXED) return true; else if (amdgpu_dm_crtc_vrr_active(old_state) != amdgpu_dm_crtc_vrr_active(new_state)) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index a76e6fc3fef78..dd4b131fac6cb 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -438,9 +438,12 @@ bool dc_stream_adjust_vmin_vmax(struct dc *dc, * Don't adjust DRR while there's bandwidth optimizations pending to * avoid conflicting with firmware updates. */ - if (dc->ctx->dce_version > DCE_VERSION_MAX) - if (dc->optimized_required || dc->wm_optimized_required) + if (dc->ctx->dce_version > DCE_VERSION_MAX) { + if (dc->optimized_required || dc->wm_optimized_required) { + stream->adjust.timing_adjust_pending = true; return false; + } + }

dc_exit_ips_for_hw_access(dc);

@@ -2978,7 +2981,8 @@ static void copy_stream_update_to_stream(struct dc *dc,

if (update->crtc_timing_adjust) { if (stream->adjust.v_total_min != update->crtc_timing_adjust->v_total_min || - stream->adjust.v_total_max != update->crtc_timing_adjust->v_total_max) + stream->adjust.v_total_max != update->crtc_timing_adjust->v_total_max || + stream->adjust.timing_adjust_pending) update->crtc_timing_adjust->timing_adjust_pending = true; stream->adjust = *update->crtc_timing_adjust; update->crtc_timing_adjust->timing_adjust_pending = false;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit 1cfe51ef07ca3286581d612debfb0430eeccbb65 ]

If navi_amd_register_client() fails, the previous i2c_dw_probe() call should be undone by a corresponding i2c_del_adapter() call, as already done in the remove function.

Fixes: 17631e8ca2d3 ("i2c: designware: Add driver support for AMD NAVI GPU") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Cc: stable@vger.kernel.org # v5.13+ Acked-by: Jarkko Nikula jarkko.nikula@linux.intel.com Signed-off-by: Andi Shyti andi.shyti@kernel.org Link: https://lore.kernel.org/r/fcd9651835a32979df8802b2db9504c523a8ebbb.174715898... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-designware-pcidrv.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 433cb285d3b20..5ea6d40373e7e 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -278,9 +278,11 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,

if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) { dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, &dgpu_node); - if (IS_ERR(dev->slave)) + if (IS_ERR(dev->slave)) { + i2c_del_adapter(&dev->adapter); return dev_err_probe(device, PTR_ERR(dev->slave), "register UCSI failed\n"); + } }

pm_runtime_set_autosuspend_delay(device, 1000);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Claudiu Beznea claudiu.beznea.uj@bp.renesas.com

[ Upstream commit 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 ]

The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes.

This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops

To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used.

While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway.

Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Tested-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Reviewed-by: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Claudiu Beznea claudiu.beznea.uj@bp.renesas.com Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.renes... Signed-off-by: Vinod Koul vkoul@kernel.org Stable-dep-of: 9ce71e85b29e ("phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/renesas/phy-rcar-gen3-usb2.c | 49 +++++++++++++----------- 1 file changed, 26 insertions(+), 23 deletions(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 4cd1b6e677482..188e903445aeb 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -9,6 +9,7 @@ * Copyright (C) 2014 Cogent Embedded, Inc. */

+#include <linux/cleanup.h> #include <linux/extcon-provider.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -118,7 +119,7 @@ struct rcar_gen3_chan { struct regulator *vbus; struct reset_control *rstc; struct work_struct work; - struct mutex lock; /* protects rphys[...].powered */ + spinlock_t lock; /* protects access to hardware and driver data structure. */ enum usb_dr_mode dr_mode; u32 obint_enable_bits; bool extcon_host; @@ -348,6 +349,8 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr, bool is_b_device; enum phy_mode cur_mode, new_mode;

+ guard(spinlock_irqsave)(&ch->lock); + if (!ch->is_otg_channel || !rcar_gen3_is_any_otg_rphy_initialized(ch)) return -EIO;

@@ -415,7 +418,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); } - msleep(20); + mdelay(20);

writel(0xffffffff, usb2_base + USB2_OBINTSTA); writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN); @@ -436,12 +439,14 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) if (pm_runtime_suspended(dev)) goto rpm_put;

- status = readl(usb2_base + USB2_OBINTSTA); - if (status & ch->obint_enable_bits) { - dev_vdbg(dev, "%s: %08x\n", __func__, status); - writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); - rcar_gen3_device_recognition(ch); - ret = IRQ_HANDLED; + scoped_guard(spinlock, &ch->lock) { + status = readl(usb2_base + USB2_OBINTSTA); + if (status & ch->obint_enable_bits) { + dev_vdbg(dev, "%s: %08x\n", __func__, status); + writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA); + rcar_gen3_device_recognition(ch); + ret = IRQ_HANDLED; + } }

rpm_put: @@ -456,6 +461,8 @@ static int rcar_gen3_phy_usb2_init(struct phy *p) void __iomem *usb2_base = channel->base; u32 val;

+ guard(spinlock_irqsave)(&channel->lock); + /* Initialize USB2 part */ val = readl(usb2_base + USB2_INT_ENABLE); val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits; @@ -482,6 +489,8 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p) void __iomem *usb2_base = channel->base; u32 val;

+ guard(spinlock_irqsave)(&channel->lock); + rphy->initialized = false;

val = readl(usb2_base + USB2_INT_ENABLE); @@ -501,16 +510,17 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) u32 val; int ret = 0;

- mutex_lock(&channel->lock); - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; - if (channel->vbus) { ret = regulator_enable(channel->vbus); if (ret) - goto out; + return ret; }

+ guard(spinlock_irqsave)(&channel->lock); + + if (!rcar_gen3_are_all_rphys_power_off(channel)) + goto out; + val = readl(usb2_base + USB2_USBCTR); val |= USB2_USBCTR_PLL_RST; writel(val, usb2_base + USB2_USBCTR); @@ -520,7 +530,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) out: /* The powered flag should be set for any other phys anyway */ rphy->powered = true; - mutex_unlock(&channel->lock);

return 0; } @@ -531,18 +540,12 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0;

- mutex_lock(&channel->lock); - rphy->powered = false; - - if (!rcar_gen3_are_all_rphys_power_off(channel)) - goto out; + scoped_guard(spinlock_irqsave, &channel->lock) + rphy->powered = false;

if (channel->vbus) ret = regulator_disable(channel->vbus);

-out: - mutex_unlock(&channel->lock); - return ret; }

@@ -753,7 +756,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) if (phy_data->no_adp_ctrl) channel->obint_enable_bits = USB2_OBINT_IDCHG_EN;

- mutex_init(&channel->lock); + spin_lock_init(&channel->lock); for (i = 0; i < NUM_OF_PHYS; i++) { channel->rphys[i].phy = devm_phy_create(dev, NULL, phy_data->phy_usb2_ops);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Claudiu Beznea claudiu.beznea.uj@bp.renesas.com

[ Upstream commit 9ce71e85b29eb63e48e294479742e670513f03a0 ]

Assert PLL reset on PHY power off. This saves power.

Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Tested-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Reviewed-by: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Claudiu Beznea claudiu.beznea.uj@bp.renesas.com Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.renes... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/renesas/phy-rcar-gen3-usb2.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 188e903445aeb..b45aee8f59644 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -540,9 +540,17 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0;

- scoped_guard(spinlock_irqsave, &channel->lock) + scoped_guard(spinlock_irqsave, &channel->lock) { rphy->powered = false;

+ if (rcar_gen3_are_all_rphys_power_off(channel)) { + u32 val = readl(channel->base + USB2_USBCTR); + + val |= USB2_USBCTR_PLL_RST; + writel(val, channel->base + USB2_USBCTR); + } + } + if (channel->vbus) ret = regulator_disable(channel->vbus);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Heiko Stuebner heiko@sntech.de

[ Upstream commit 6907e8093b3070d877ee607e5ceede60cfd08bde ]

The RK3588 has an offset into the OTP area where the readable area begins and automatically adds this to the start address. Other variants are very much similar to rk3588, just with a different offset, so move that value into variant-data.

To match the size in bytes, store this value also in bytes and not in number of blocks.

Signed-off-by: Heiko Stuebner heiko@sntech.de Tested-by: Nicolas Frattaroli nicolas.frattaroli@collabora.com Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Link: https://lore.kernel.org/r/20250411112251.68002-2-srinivas.kandagatla@linaro.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvmem/rockchip-otp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/nvmem/rockchip-otp.c b/drivers/nvmem/rockchip-otp.c index ebc3f0b24166b..3edfbfc2d7220 100644 --- a/drivers/nvmem/rockchip-otp.c +++ b/drivers/nvmem/rockchip-otp.c @@ -59,7 +59,6 @@ #define RK3588_OTPC_AUTO_EN 0x08 #define RK3588_OTPC_INT_ST 0x84 #define RK3588_OTPC_DOUT0 0x20 -#define RK3588_NO_SECURE_OFFSET 0x300 #define RK3588_NBYTES 4 #define RK3588_BURST_NUM 1 #define RK3588_BURST_SHIFT 8 @@ -69,6 +68,7 @@

struct rockchip_data { int size; + int read_offset; const char * const *clks; int num_clks; nvmem_reg_read_t reg_read; @@ -196,7 +196,7 @@ static int rk3588_otp_read(void *context, unsigned int offset, addr_start = round_down(offset, RK3588_NBYTES) / RK3588_NBYTES; addr_end = round_up(offset + bytes, RK3588_NBYTES) / RK3588_NBYTES; addr_len = addr_end - addr_start; - addr_start += RK3588_NO_SECURE_OFFSET; + addr_start += otp->data->read_offset / RK3588_NBYTES;

buf = kzalloc(array_size(addr_len, RK3588_NBYTES), GFP_KERNEL); if (!buf) @@ -280,6 +280,7 @@ static const char * const rk3588_otp_clocks[] = {

static const struct rockchip_data rk3588_data = { .size = 0x400, + .read_offset = 0xc00, .clks = rk3588_otp_clocks, .num_clks = ARRAY_SIZE(rk3588_otp_clocks), .reg_read = rk3588_otp_read,

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov dmitry.baryshkov@linaro.org

[ Upstream commit 7a06ef75107799675ea6e4d73b9df37e18e352a8 ]

If the NVMEM specifies a stride to access data, reading particular cell might require bit offset that is bigger than one byte. Rework NVMEM core code to support bit offsets of more than 8 bits.

Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Link: https://lore.kernel.org/r/20250411112251.68002-9-srinivas.kandagatla@linaro.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvmem/core.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index d00a3b015635c..8af2a569c23aa 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -824,7 +824,9 @@ static int nvmem_add_cells_from_dt(struct nvmem_device *nvmem, struct device_nod if (addr && len == (2 * sizeof(u32))) { info.bit_offset = be32_to_cpup(addr++); info.nbits = be32_to_cpup(addr); - if (info.bit_offset >= BITS_PER_BYTE || info.nbits < 1) { + if (info.bit_offset >= BITS_PER_BYTE * info.bytes || + info.nbits < 1 || + info.bit_offset + info.nbits > BITS_PER_BYTE * info.bytes) { dev_err(dev, "nvmem: invalid bits on %pOF\n", child); of_node_put(child); return -EINVAL; @@ -1617,21 +1619,29 @@ EXPORT_SYMBOL_GPL(nvmem_cell_put); static void nvmem_shift_read_buffer_in_place(struct nvmem_cell_entry *cell, void *buf) { u8 *p, *b; - int i, extra, bit_offset = cell->bit_offset; + int i, extra, bytes_offset; + int bit_offset = cell->bit_offset;

p = b = buf; - if (bit_offset) { + + bytes_offset = bit_offset / BITS_PER_BYTE; + b += bytes_offset; + bit_offset %= BITS_PER_BYTE; + + if (bit_offset % BITS_PER_BYTE) { /* First shift */ - *b++ >>= bit_offset; + *p = *b++ >> bit_offset;

/* setup rest of the bytes if any */ for (i = 1; i < cell->bytes; i++) { /* Get bits from next byte and shift them towards msb */ - *p |= *b << (BITS_PER_BYTE - bit_offset); + *p++ |= *b << (BITS_PER_BYTE - bit_offset);

- p = b; - *b++ >>= bit_offset; + *p = *b++ >> bit_offset; } + } else if (p != b) { + memmove(p, b, cell->bytes - bytes_offset); + p += cell->bytes - 1; } else { /* point to the msb */ p += cell->bytes - 1;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov dmitry.baryshkov@linaro.org

[ Upstream commit 6786484223d5705bf7f919c1e5055d478ebeec32 ]

If NVMEM cell uses bit offset or specifies bit truncation, update raw_len manually (following the cell->bytes update), ensuring that the NVMEM access is still word-aligned.

Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Link: https://lore.kernel.org/r/20250411112251.68002-11-srinivas.kandagatla@linaro... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvmem/core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 3671d156c7c33..d1869e6de3844 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -581,9 +581,11 @@ static int nvmem_cell_info_to_nvmem_cell_entry_nodup(struct nvmem_device *nvmem, cell->nbits = info->nbits; cell->np = info->np;

- if (cell->nbits) + if (cell->nbits) { cell->bytes = DIV_ROUND_UP(cell->nbits + cell->bit_offset, BITS_PER_BYTE); + cell->raw_len = ALIGN(cell->bytes, nvmem->word_size); + }

if (!IS_ALIGNED(cell->offset, nvmem->stride)) { dev_err(&nvmem->dev,

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Bogdanov d.bogdanov@yadro.com

[ Upstream commit 7f533cc5ee4c4436cee51dc58e81dfd9c3384418 ]

NOPIN response timer may expire on a deleted connection and crash with such logs:

Did not receive response to NOPIN on CID: 0, failing connection for I_T Nexus (null),i,0x00023d000125,iqn.2017-01.com.iscsi.target,t,0x3d

BUG: Kernel NULL pointer dereference on read at 0x00000000 NIP strlcpy+0x8/0xb0 LR iscsit_fill_cxn_timeout_err_stats+0x5c/0xc0 [iscsi_target_mod] Call Trace: iscsit_handle_nopin_response_timeout+0xfc/0x120 [iscsi_target_mod] call_timer_fn+0x58/0x1f0 run_timer_softirq+0x740/0x860 __do_softirq+0x16c/0x420 irq_exit+0x188/0x1c0 timer_interrupt+0x184/0x410

That is because nopin response timer may be re-started on nopin timer expiration.

Stop nopin timer before stopping the nopin response timer to be sure that no one of them will be re-started.

Signed-off-by: Dmitry Bogdanov d.bogdanov@yadro.com Link: https://lore.kernel.org/r/20241224101757.32300-1-d.bogdanov@yadro.com Reviewed-by: Maurizio Lombardi mlombard@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/iscsi/iscsi_target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 6002283cbebab..68bbdf3ee101d 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -4317,8 +4317,8 @@ int iscsit_close_connection( spin_unlock(&iscsit_global->ts_bitmap_lock);

iscsit_stop_timers_for_cmds(conn); - iscsit_stop_nopin_response_timer(conn); iscsit_stop_nopin_timer(conn); + iscsit_stop_nopin_response_timer(conn);

if (conn->conn_transport->iscsit_wait_conn) conn->conn_transport->iscsit_wait_conn(conn);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zhongqiu Han quic_zhonhan@quicinc.com

[ Upstream commit 2e2f925fe737576df2373931c95e1a2b66efdfef ]

syzbot reports a data-race when accessing the event_triggered, here is the simplified stack when the issue occurred:

================================================================== BUG: KCSAN: data-race in virtqueue_disable_cb / virtqueue_enable_cb_delayed

write to 0xffff8881025bc452 of 1 bytes by task 3288 on cpu 0: virtqueue_enable_cb_delayed+0x42/0x3c0 drivers/virtio/virtio_ring.c:2653 start_xmit+0x230/0x1310 drivers/net/virtio_net.c:3264 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3800 [inline]

read to 0xffff8881025bc452 of 1 bytes by interrupt on cpu 1: virtqueue_disable_cb_split drivers/virtio/virtio_ring.c:880 [inline] virtqueue_disable_cb+0x92/0x180 drivers/virtio/virtio_ring.c:2566 skb_xmit_done+0x5f/0x140 drivers/net/virtio_net.c:777 vring_interrupt+0x161/0x190 drivers/virtio/virtio_ring.c:2715 __handle_irq_event_percpu+0x95/0x490 kernel/irq/handle.c:158 handle_irq_event_percpu kernel/irq/handle.c:193 [inline]

value changed: 0x01 -> 0x00 ==================================================================

When the data race occurs, the function virtqueue_enable_cb_delayed() sets event_triggered to false, and virtqueue_disable_cb_split/packed() reads it as false due to the race condition. Since event_triggered is an unreliable hint used for optimization, this should only cause the driver temporarily suggest that the device not send an interrupt notification when the event index is used.

Fix this KCSAN reported data-race issue by explicitly tagging the access as data_racy.

Reported-by: syzbot+efe683d57990864b8c8e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/67c7761a.050a0220.15b4b9.0018.GAE@google.com/ Signed-off-by: Zhongqiu Han quic_zhonhan@quicinc.com Message-Id: 20250312130412.3516307-1-quic_zhonhan@quicinc.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Acked-by: Jason Wang jasowang@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/virtio/virtio_ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 1f8a322eb00be..147926c8bae09 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -2530,7 +2530,7 @@ bool virtqueue_enable_cb_delayed(struct virtqueue *_vq) struct vring_virtqueue *vq = to_vvq(_vq);

if (vq->event_triggered) - vq->event_triggered = false; + data_race(vq->event_triggered = false);

return vq->packed_ring ? virtqueue_enable_cb_delayed_packed(_vq) : virtqueue_enable_cb_delayed_split(_vq);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lorenzo Stoakes lorenzo.stoakes@oracle.com

[ Upstream commit 8e553520596bbd5ce832e26e9d721e6a0c797b8b ]

The struct page->mapping, index fields are deprecated and soon to be only available as part of a folio.

It is likely the intel_th code which sets page->mapping, index is was implemented out of concern that some aspect of the page fault logic may encounter unexpected problems should they not.

However, the appropriate interface for inserting kernel-allocated memory is vm_insert_page() in a VM_MIXEDMAP. By using the helper function vmf_insert_mixed() we can do this with minimal churn in the existing fault handler.

By doing so, we bypass the remainder of the faulting logic. The pages are still pinned so there is no possibility of anything unexpected being done with the pages once established.

It would also be reasonable to pre-map everything on fault, however to minimise churn we retain the fault handler.

We also eliminate all code which clears page->mapping on teardown as this has now become unnecessary.

The MSU code relies on faulting to function correctly, so is by definition dependent on CONFIG_MMU. We avoid spurious reports about compilation failure for unsupported platforms by making this requirement explicit in Kconfig as part of this change too.

Signed-off-by: Lorenzo Stoakes lorenzo.stoakes@oracle.com Acked-by: Alexander Shishkin alexander.shishkin@linux.intel.com Link: https://lore.kernel.org/r/20250331125608.60300-1-lorenzo.stoakes@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwtracing/intel_th/Kconfig | 1 + drivers/hwtracing/intel_th/msu.c | 31 +++++++----------------------- 2 files changed, 8 insertions(+), 24 deletions(-)

diff --git a/drivers/hwtracing/intel_th/Kconfig b/drivers/hwtracing/intel_th/Kconfig index 4b6359326ede9..4f7d2b6d79e29 100644 --- a/drivers/hwtracing/intel_th/Kconfig +++ b/drivers/hwtracing/intel_th/Kconfig @@ -60,6 +60,7 @@ config INTEL_TH_STH

config INTEL_TH_MSU tristate "Intel(R) Trace Hub Memory Storage Unit" + depends on MMU help Memory Storage Unit (MSU) trace output device enables storing STP traces to system memory. It supports single diff --git a/drivers/hwtracing/intel_th/msu.c b/drivers/hwtracing/intel_th/msu.c index 66123d684ac9e..93b65a9731d72 100644 --- a/drivers/hwtracing/intel_th/msu.c +++ b/drivers/hwtracing/intel_th/msu.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <linux/workqueue.h> #include <linux/dma-mapping.h> +#include <linux/pfn_t.h>

#ifdef CONFIG_X86 #include <asm/set_memory.h> @@ -967,7 +968,6 @@ static void msc_buffer_contig_free(struct msc *msc) for (off = 0; off < msc->nr_pages << PAGE_SHIFT; off += PAGE_SIZE) { struct page *page = virt_to_page(msc->base + off);

- page->mapping = NULL; __free_page(page); }

@@ -1149,9 +1149,6 @@ static void __msc_buffer_win_free(struct msc *msc, struct msc_window *win) int i;

for_each_sg(win->sgt->sgl, sg, win->nr_segs, i) { - struct page *page = msc_sg_page(sg); - - page->mapping = NULL; dma_free_coherent(msc_dev(win->msc)->parent->parent, PAGE_SIZE, sg_virt(sg), sg_dma_address(sg)); } @@ -1592,22 +1589,10 @@ static void msc_mmap_close(struct vm_area_struct *vma) { struct msc_iter *iter = vma->vm_file->private_data; struct msc *msc = iter->msc; - unsigned long pg;

if (!atomic_dec_and_mutex_lock(&msc->mmap_count, &msc->buf_mutex)) return;

- /* drop page _refcounts */ - for (pg = 0; pg < msc->nr_pages; pg++) { - struct page *page = msc_buffer_get_page(msc, pg); - - if (WARN_ON_ONCE(!page)) - continue; - - if (page->mapping) - page->mapping = NULL; - } - /* last mapping -- drop user_count */ atomic_dec(&msc->user_count); mutex_unlock(&msc->buf_mutex); @@ -1617,16 +1602,14 @@ static vm_fault_t msc_mmap_fault(struct vm_fault *vmf) { struct msc_iter *iter = vmf->vma->vm_file->private_data; struct msc *msc = iter->msc; + struct page *page;

- vmf->page = msc_buffer_get_page(msc, vmf->pgoff); - if (!vmf->page) + page = msc_buffer_get_page(msc, vmf->pgoff); + if (!page) return VM_FAULT_SIGBUS;

- get_page(vmf->page); - vmf->page->mapping = vmf->vma->vm_file->f_mapping; - vmf->page->index = vmf->pgoff; - - return 0; + get_page(page); + return vmf_insert_mixed(vmf->vma, vmf->address, page_to_pfn_t(page)); }

static const struct vm_operations_struct msc_mmap_ops = { @@ -1667,7 +1650,7 @@ static int intel_th_msc_mmap(struct file *file, struct vm_area_struct *vma) atomic_dec(&msc->user_count);

vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - vm_flags_set(vma, VM_DONTEXPAND | VM_DONTCOPY); + vm_flags_set(vma, VM_DONTEXPAND | VM_DONTCOPY | VM_MIXEDMAP); vma->vm_ops = &msc_mmap_ops; return ret; }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski m.szyprowski@samsung.com

[ Upstream commit c9b19ea63036fc537a69265acea1b18dabd1cbd3 ]

When CONFIG_NEED_DMA_MAP_STATE is not defined, dma-mapping clients might report unused data compilation warnings for dma_unmap_*() calls arguments. Redefine macros for those calls to let compiler to notice that it is okay when the provided arguments are not used.

Reported-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Suggested-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Tested-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20250415075659.428549-1-m.szyprowski@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/dma-mapping.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index 1524da363734a..22b9099927fad 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -633,10 +633,14 @@ static inline int dma_mmap_wc(struct device *dev, #else #define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) #define DEFINE_DMA_UNMAP_LEN(LEN_NAME) -#define dma_unmap_addr(PTR, ADDR_NAME) (0) -#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define dma_unmap_len(PTR, LEN_NAME) (0) -#define dma_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) +#define dma_unmap_addr(PTR, ADDR_NAME) \ + ({ typeof(PTR) __p __maybe_unused = PTR; 0; }) +#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + do { typeof(PTR) __p __maybe_unused = PTR; } while (0) +#define dma_unmap_len(PTR, LEN_NAME) \ + ({ typeof(PTR) __p __maybe_unused = PTR; 0; }) +#define dma_unmap_len_set(PTR, LEN_NAME, VAL) \ + do { typeof(PTR) __p __maybe_unused = PTR; } while (0) #endif

#endif /* _LINUX_DMA_MAPPING_H */

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefano Garzarella sgarzare@redhat.com

[ Upstream commit fec0abf52609c20279243699d08b660c142ce0aa ]

Commit cb380909ae3b ("vhost: return task creation error instead of NULL") changed the return value of vhost_task_create(), but did not update the documentation.

Reflect the change in the documentation: on an error, vhost_task_create() returns an ERR_PTR() and no longer NULL.

Signed-off-by: Stefano Garzarella sgarzare@redhat.com Message-Id: 20250327124435.142831-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/vhost_task.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/vhost_task.c b/kernel/vhost_task.c index 2ef2e1b800916..2f844c279a3e0 100644 --- a/kernel/vhost_task.c +++ b/kernel/vhost_task.c @@ -111,7 +111,7 @@ EXPORT_SYMBOL_GPL(vhost_task_stop); * @arg: data to be passed to fn and handled_kill * @name: the thread's name * - * This returns a specialized task for use by the vhost layer or NULL on + * This returns a specialized task for use by the vhost layer or ERR_PTR() on * failure. The returned task is inactive, and the caller must fire it up * through vhost_task_start(). */

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ranjan Kumar ranjan.kumar@broadcom.com

[ Upstream commit b0b7ee3b574a72283399b9232f6190be07f220c0 ]

Ensure event logs are only generated when the debug logging level MPI3_DEBUG_EVENT is enabled. This prevents unnecessary logging.

Signed-off-by: Ranjan Kumar ranjan.kumar@broadcom.com Link: https://lore.kernel.org/r/20250415101546.204018-1-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/mpi3mr/mpi3mr_fw.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c index c0a372868e1d7..f6d3db3fd0d8e 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -174,6 +174,9 @@ static void mpi3mr_print_event_data(struct mpi3mr_ioc *mrioc, char *desc = NULL; u16 event;

+ if (!(mrioc->logging_level & MPI3_DEBUG_EVENT)) + return; + event = event_reply->event;

switch (event) {

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Balbir Singh balbirs@nvidia.com

[ Upstream commit cae5572ec9261f752af834cdaaf5a0ba0afcf256 ]

lkp reported a warning about missing prototype for a recent patch.

The kernel-doc style comments are out of sync, move them to the right function.

Cc: Marek Szyprowski m.szyprowski@samsung.com Cc: Christoph Hellwig hch@lst.de

Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202504190615.g9fANxHw-lkp@intel.com/

Signed-off-by: Balbir Singh balbirs@nvidia.com [mszyprow: reformatted subject] Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Link: https://lore.kernel.org/r/20250422114034.3535515-1-balbirs@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/dma/mapping.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/kernel/dma/mapping.c b/kernel/dma/mapping.c index f7366083b4d00..74d453ec750a1 100644 --- a/kernel/dma/mapping.c +++ b/kernel/dma/mapping.c @@ -897,14 +897,6 @@ int dma_set_coherent_mask(struct device *dev, u64 mask) } EXPORT_SYMBOL(dma_set_coherent_mask);

-/** - * dma_addressing_limited - return if the device is addressing limited - * @dev: device to check - * - * Return %true if the devices DMA mask is too small to address all memory in - * the system, else %false. Lack of addressing bits is the prime reason for - * bounce buffering, but might not be the only one. - */ static bool __dma_addressing_limited(struct device *dev) { const struct dma_map_ops *ops = get_dma_ops(dev); @@ -918,6 +910,14 @@ static bool __dma_addressing_limited(struct device *dev) return !dma_direct_all_ram_mapped(dev); }

+/** + * dma_addressing_limited - return if the device is addressing limited + * @dev: device to check + * + * Return %true if the devices DMA mask is too small to address all memory in + * the system, else %false. Lack of addressing bits is the prime reason for + * bounce buffering, but might not be the only one. + */ bool dma_addressing_limited(struct device *dev) { if (!__dma_addressing_limited(dev))

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Davidlohr Bueso dave@stgolabs.net

[ Upstream commit 7ffe3de53a885dbb5836541c2178bd07d1bad7df ]

Callers of __find_get_block() may or may not allow for blocking semantics, and is currently assumed that it will not. Layout two paths based on this. The the private_lock scheme will continued to be used for atomic contexts. Otherwise take the folio lock instead, which protects the buffers, such as vs migration and try_to_free_buffers().

Per the "hack idea", the latter can alleviate contention on the private_lock for bdev mappings. For reasons of determinism and avoid making bugs hard to reproduce, the trylocking is not attempted.

No change in semantics. All lookup users still take the spinlock.

Reviewed-by: Jan Kara jack@suse.cz Signed-off-by: Davidlohr Bueso dave@stgolabs.net Link: https://kdevops.org/ext4/v6.15-rc2.html # [0] Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1] Link: https://lore.kernel.org/20250418015921.132400-2-dave@stgolabs.net Tested-by: kdevops@lists.linux.dev Reviewed-by: Luis Chamberlain mcgrof@kernel.org Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/buffer.c | 41 +++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 16 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c index 32bd0f4c42236..ba464c2002061 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -176,18 +176,8 @@ void end_buffer_write_sync(struct buffer_head *bh, int uptodate) } EXPORT_SYMBOL(end_buffer_write_sync);

-/* - * Various filesystems appear to want __find_get_block to be non-blocking. - * But it's the page lock which protects the buffers. To get around this, - * we get exclusion from try_to_free_buffers with the blockdev mapping's - * i_private_lock. - * - * Hack idea: for the blockdev mapping, i_private_lock contention - * may be quite high. This code could TryLock the page, and if that - * succeeds, there is no need to take i_private_lock. - */ static struct buffer_head * -__find_get_block_slow(struct block_device *bdev, sector_t block) +__find_get_block_slow(struct block_device *bdev, sector_t block, bool atomic) { struct address_space *bd_mapping = bdev->bd_mapping; const int blkbits = bd_mapping->host->i_blkbits; @@ -204,7 +194,16 @@ __find_get_block_slow(struct block_device *bdev, sector_t block) if (IS_ERR(folio)) goto out;

- spin_lock(&bd_mapping->i_private_lock); + /* + * Folio lock protects the buffers. Callers that cannot block + * will fallback to serializing vs try_to_free_buffers() via + * the i_private_lock. + */ + if (atomic) + spin_lock(&bd_mapping->i_private_lock); + else + folio_lock(folio); + head = folio_buffers(folio); if (!head) goto out_unlock; @@ -236,7 +235,10 @@ __find_get_block_slow(struct block_device *bdev, sector_t block) 1 << blkbits); } out_unlock: - spin_unlock(&bd_mapping->i_private_lock); + if (atomic) + spin_unlock(&bd_mapping->i_private_lock); + else + folio_unlock(folio); folio_put(folio); out: return ret; @@ -1394,14 +1396,15 @@ lookup_bh_lru(struct block_device *bdev, sector_t block, unsigned size) * it in the LRU and mark it as accessed. If it is not present then return * NULL */ -struct buffer_head * -__find_get_block(struct block_device *bdev, sector_t block, unsigned size) +static struct buffer_head * +find_get_block_common(struct block_device *bdev, sector_t block, + unsigned size, bool atomic) { struct buffer_head *bh = lookup_bh_lru(bdev, block, size);

if (bh == NULL) { /* __find_get_block_slow will mark the page accessed */ - bh = __find_get_block_slow(bdev, block); + bh = __find_get_block_slow(bdev, block, atomic); if (bh) bh_lru_install(bh); } else @@ -1409,6 +1412,12 @@ __find_get_block(struct block_device *bdev, sector_t block, unsigned size)

return bh; } + +struct buffer_head * +__find_get_block(struct block_device *bdev, sector_t block, unsigned size) +{ + return find_get_block_common(bdev, block, size, true); +} EXPORT_SYMBOL(__find_get_block);

/**

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Davidlohr Bueso dave@stgolabs.net

[ Upstream commit 5b67d43976828dea2394eae2556b369bb7a61f64 ]

Convert to the new nonatomic flavor to benefit from potential performance benefits and adapt in the future vs migration such that semantics are kept.

Convert write_boundary_block() which already takes the buffer lock as well as bdev_getblk() depending on the respective gpf flags. There are no changes in semantics.

Suggested-by: Jan Kara jack@suse.cz Reviewed-by: Jan Kara jack@suse.cz Signed-off-by: Davidlohr Bueso dave@stgolabs.net Link: https://kdevops.org/ext4/v6.15-rc2.html # [0] Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1] Link: https://lore.kernel.org/20250418015921.132400-4-dave@stgolabs.net Tested-by: kdevops@lists.linux.dev # [0] [1] Reviewed-by: Luis Chamberlain mcgrof@kernel.org Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/buffer.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c index b04705eb6cc57..e9e84512a027a 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -658,7 +658,9 @@ EXPORT_SYMBOL(generic_buffers_fsync); void write_boundary_block(struct block_device *bdev, sector_t bblock, unsigned blocksize) { - struct buffer_head *bh = __find_get_block(bdev, bblock + 1, blocksize); + struct buffer_head *bh; + + bh = __find_get_block_nonatomic(bdev, bblock + 1, blocksize); if (bh) { if (buffer_dirty(bh)) write_dirty_buffer(bh, 0); @@ -1446,7 +1448,12 @@ EXPORT_SYMBOL(__find_get_block_nonatomic); struct buffer_head *bdev_getblk(struct block_device *bdev, sector_t block, unsigned size, gfp_t gfp) { - struct buffer_head *bh = __find_get_block(bdev, block, size); + struct buffer_head *bh; + + if (gfpflags_allow_blocking(gfp)) + bh = __find_get_block_nonatomic(bdev, block, size); + else + bh = __find_get_block(bdev, block, size);

might_alloc(gfp); if (bh)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Davidlohr Bueso dave@stgolabs.net

[ Upstream commit f76d4c28a46a9260d85e00dafc8f46d369365d33 ]

Convert to the new nonatomic flavor to benefit from potential performance benefits and adapt in the future vs migration such that semantics are kept.

- jbd2_journal_revoke(): can sleep (has might_sleep() in the beginning)

- jbd2_journal_cancel_revoke(): only used from do_get_write_access() and do_get_create_access() which do sleep. So can sleep.

- jbd2_clear_buffer_revoked_flags() - only called from journal commit code which sleeps. So can sleep.

Suggested-by: Jan Kara jack@suse.cz Reviewed-by: Jan Kara jack@suse.cz Signed-off-by: Davidlohr Bueso dave@stgolabs.net Link: https://kdevops.org/ext4/v6.15-rc2.html # [0] Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1] Link: https://lore.kernel.org/20250418015921.132400-6-dave@stgolabs.net Tested-by: kdevops@lists.linux.dev Reviewed-by: Luis Chamberlain mcgrof@kernel.org Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jbd2/revoke.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/fs/jbd2/revoke.c b/fs/jbd2/revoke.c index ce63d5fde9c3a..f68fc8c255f00 100644 --- a/fs/jbd2/revoke.c +++ b/fs/jbd2/revoke.c @@ -345,7 +345,8 @@ int jbd2_journal_revoke(handle_t *handle, unsigned long long blocknr, bh = bh_in;

if (!bh) { - bh = __find_get_block(bdev, blocknr, journal->j_blocksize); + bh = __find_get_block_nonatomic(bdev, blocknr, + journal->j_blocksize); if (bh) BUFFER_TRACE(bh, "found on hash"); } @@ -355,7 +356,8 @@ int jbd2_journal_revoke(handle_t *handle, unsigned long long blocknr,

/* If there is a different buffer_head lying around in * memory anywhere... */ - bh2 = __find_get_block(bdev, blocknr, journal->j_blocksize); + bh2 = __find_get_block_nonatomic(bdev, blocknr, + journal->j_blocksize); if (bh2) { /* ... and it has RevokeValid status... */ if (bh2 != bh && buffer_revokevalid(bh2)) @@ -466,7 +468,8 @@ int jbd2_journal_cancel_revoke(handle_t *handle, struct journal_head *jh) * state machine will get very upset later on. */ if (need_cancel) { struct buffer_head *bh2; - bh2 = __find_get_block(bh->b_bdev, bh->b_blocknr, bh->b_size); + bh2 = __find_get_block_nonatomic(bh->b_bdev, bh->b_blocknr, + bh->b_size); if (bh2) { if (bh2 != bh) clear_buffer_revoked(bh2); @@ -495,9 +498,9 @@ void jbd2_clear_buffer_revoked_flags(journal_t *journal) struct jbd2_revoke_record_s *record; struct buffer_head *bh; record = (struct jbd2_revoke_record_s *)list_entry; - bh = __find_get_block(journal->j_fs_dev, - record->blocknr, - journal->j_blocksize); + bh = __find_get_block_nonatomic(journal->j_fs_dev, + record->blocknr, + journal->j_blocksize); if (bh) { clear_buffer_revoked(bh); __brelse(bh);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicholas Susanto nsusanto@amd.com

[ Upstream commit 756c85e4d0ddc497b4ad5b1f41ad54e838e06188 ]

[Why]

Urgent latency adjustment was disabled on DCN35 due to issues with P0 enablement on some platforms. Without urgent latency, underflows occur when doing certain high timing configurations. After testing, we found that reenabling urgent latency didn't reintroduce p0 support on multiple platforms.

[How]

renable urgent latency on DCN35 and setting it to 3000 Mhz.

This reverts commit 3412860cc4c0c484f53f91b371483e6e4440c3e5.

Reviewed-by: Charlene Liu charlene.liu@amd.com Signed-off-by: Nicholas Susanto nsusanto@amd.com Signed-off-by: Zaeem Mohamed zaeem.mohamed@amd.com Tested-by: Mark Broadworth mark.broadworth@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com (cherry picked from commit cd74ce1f0cddffb3f36d0995d0f61e89f0010738) Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c index 47d785204f29c..beed7adbbd43e 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c @@ -195,9 +195,9 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_5_soc = { .dcn_downspread_percent = 0.5, .gpuvm_min_page_size_bytes = 4096, .hostvm_min_page_size_bytes = 4096, - .do_urgent_latency_adjustment = 0, + .do_urgent_latency_adjustment = 1, .urgent_latency_adjustment_fabric_clock_component_us = 0, - .urgent_latency_adjustment_fabric_clock_reference_mhz = 0, + .urgent_latency_adjustment_fabric_clock_reference_mhz = 3000, };

void dcn35_build_wm_range_table_fpu(struct clk_mgr *clk_mgr)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ihor Solodrai ihor.solodrai@linux.dev

[ Upstream commit f2858f308131a09e33afb766cd70119b5b900569 ]

"sockmap_ktls disconnect_after_delete" test has been failing on BPF CI after recent merges from netdev: * https://github.com/kernel-patches/bpf/actions/runs/14458537639 * https://github.com/kernel-patches/bpf/actions/runs/14457178732

It happens because disconnect has been disabled for TLS [1], and it renders the test case invalid.

Removing all the test code creates a conflict between bpf and bpf-next, so for now only remove the offending assert [2].

The test will be removed later on bpf-next.

[1] https://lore.kernel.org/netdev/20250404180334.3224206-1-kuba@kernel.org/ [2] https://lore.kernel.org/bpf/cfc371285323e1a3f3b006bfcf74e6cf7ad65258@linux.d...

Signed-off-by: Ihor Solodrai ihor.solodrai@linux.dev Signed-off-by: Andrii Nakryiko andrii@kernel.org Reviewed-by: Jiayuan Chen jiayuan.chen@linux.dev Link: https://lore.kernel.org/bpf/20250416170246.2438524-1-ihor.solodrai@linux.dev Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c b/tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c index 2d0796314862a..0a99fd404f6dc 100644 --- a/tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c +++ b/tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c @@ -68,7 +68,6 @@ static void test_sockmap_ktls_disconnect_after_delete(int family, int map) goto close_cli;

err = disconnect(cli); - ASSERT_OK(err, "disconnect");

close_cli: close(cli);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pavel Begunkov asml.silence@gmail.com

[ Upstream commit 5e16f1a68d28965c12b6fa227a306fef8a680f84 ]

io_req_post_cqe() sets submit_state.cq_flush so that *flush_completions() can take care of batch commiting CQEs. Don't commit it twice by using __io_cq_unlock_post().

Signed-off-by: Pavel Begunkov asml.silence@gmail.com Link: https://lore.kernel.org/r/41c416660c509cee676b6cad96081274bcb459f3.174549386... Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- io_uring/io_uring.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c index 8ef0603c07f11..985c87ea09a90 100644 --- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -874,10 +874,15 @@ bool io_req_post_cqe(struct io_kiocb *req, s32 res, u32 cflags) lockdep_assert(!io_wq_current_is_worker()); lockdep_assert_held(&ctx->uring_lock);

- __io_cq_lock(ctx); - posted = io_fill_cqe_aux(ctx, req->cqe.user_data, res, cflags); + if (!ctx->lockless_cq) { + spin_lock(&ctx->completion_lock); + posted = io_fill_cqe_aux(ctx, req->cqe.user_data, res, cflags); + spin_unlock(&ctx->completion_lock); + } else { + posted = io_fill_cqe_aux(ctx, req->cqe.user_data, res, cflags); + } + ctx->submit_state.cq_flush = true; - __io_cq_unlock_post(ctx); return posted; }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Haoran Jiang jianghaoran@kylinos.cn

[ Upstream commit 548762f05d19c5542db7590bcdfb9be1fb928376 ]

When building the latest samples/bpf on LoongArch Fedora

make M=samples/bpf

There are compilation errors as follows:

In file included from ./linux/samples/bpf/sockex2_kern.c:2: In file included from ./include/uapi/linux/in.h:25: In file included from ./include/linux/socket.h:8: In file included from ./include/linux/uio.h:9: In file included from ./include/linux/thread_info.h:60: In file included from ./arch/loongarch/include/asm/thread_info.h:15: In file included from ./arch/loongarch/include/asm/processor.h:13: In file included from ./arch/loongarch/include/asm/cpu-info.h:11: ./arch/loongarch/include/asm/loongarch.h:13:10: fatal error: 'larchintrin.h' file not found ^~~~~~~~~~~~~~~ 1 error generated.

larchintrin.h is included in /usr/lib64/clang/14.0.6/include, and the header file location is specified at compile time.

Test on LoongArch Fedora: https://github.com/fedora-remix-loongarch/releases-info

Signed-off-by: Haoran Jiang jianghaoran@kylinos.cn Signed-off-by: zhangxi zhangxi@kylinos.cn Signed-off-by: Andrii Nakryiko andrii@kernel.org Link: https://lore.kernel.org/bpf/20250425095042.838824-1-jianghaoran@kylinos.cn Signed-off-by: Sasha Levin sashal@kernel.org --- samples/bpf/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile index 7afe040cf43b3..f06f88b26183c 100644 --- a/samples/bpf/Makefile +++ b/samples/bpf/Makefile @@ -400,7 +400,7 @@ $(obj)/%.o: $(src)/%.c @echo " CLANG-bpf " $@ $(Q)$(CLANG) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(BPF_EXTRA_CFLAGS) \ -I$(obj) -I$(srctree)/tools/testing/selftests/bpf/ \ - -I$(LIBBPF_INCLUDE) \ + -I$(LIBBPF_INCLUDE) $(CLANG_SYS_INCLUDES) \ -D__KERNEL__ -D__BPF_TRACING__ -Wno-unused-value -Wno-pointer-sign \ -D__TARGET_ARCH_$(SRCARCH) -Wno-compare-distinct-pointer-types \ -Wno-gnu-variable-sized-type-not-at-end \

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Anthony Krowiak akrowiak@linux.ibm.com

[ Upstream commit d33d729afcc8ad2148d99f9bc499b33fd0c0d73b ]

An erroneous message is written to the kernel log when either of the following actions are taken by a user:

1. Assign an adapter or domain to a vfio_ap mediated device via its sysfs assign_adapter or assign_domain attributes that would result in one or more AP queues being assigned that are already assigned to a different mediated device. Sharing of queues between mdevs is not allowed.

2. Reserve an adapter or domain for the host device driver via the AP bus driver's sysfs apmask or aqmask attribute that would result in providing host access to an AP queue that is in use by a vfio_ap mediated device. Reserving a queue for a host driver that is in use by an mdev is not allowed.

In both cases, the assignment will return an error; however, a message like the following is written to the kernel log:

vfio_ap_mdev e1839397-51a0-4e3c-91e0-c3b9c3d3047d: Userspace may not re-assign queue 00.0028 already assigned to \ e1839397-51a0-4e3c-91e0-c3b9c3d3047d

Notice the mdev reporting the error is the same as the mdev identified in the message as the one to which the queue is being assigned. It is perfectly okay to assign a queue to an mdev to which it is already assigned; the assignment is simply ignored by the vfio_ap device driver.

This patch logs more descriptive and accurate messages for both 1 and 2 above to the kernel log:

Example for 1: vfio_ap_mdev 0fe903a0-a323-44db-9daf-134c68627d61: Userspace may not assign queue 00.0033 to mdev: already assigned to \ 62177883-f1bb-47f0-914d-32a22e3a8804

Example for 2: vfio_ap_mdev 62177883-f1bb-47f0-914d-32a22e3a8804: Can not reserve queue 00.0033 for host driver: in use by mdev

Signed-off-by: Anthony Krowiak akrowiak@linux.ibm.com Link: https://lore.kernel.org/r/20250311103304.1539188-1-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/crypto/vfio_ap_ops.c | 72 ++++++++++++++++++++----------- 1 file changed, 46 insertions(+), 26 deletions(-)

diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c index 9f76f2d7b66e5..3bac163057d89 100644 --- a/drivers/s390/crypto/vfio_ap_ops.c +++ b/drivers/s390/crypto/vfio_ap_ops.c @@ -851,48 +851,66 @@ static void vfio_ap_mdev_remove(struct mdev_device *mdev) vfio_put_device(&matrix_mdev->vdev); }

-#define MDEV_SHARING_ERR "Userspace may not re-assign queue %02lx.%04lx " \ - "already assigned to %s" +#define MDEV_SHARING_ERR "Userspace may not assign queue %02lx.%04lx to mdev: already assigned to %s"

-static void vfio_ap_mdev_log_sharing_err(struct ap_matrix_mdev *matrix_mdev, - unsigned long *apm, - unsigned long *aqm) +#define MDEV_IN_USE_ERR "Can not reserve queue %02lx.%04lx for host driver: in use by mdev" + +static void vfio_ap_mdev_log_sharing_err(struct ap_matrix_mdev *assignee, + struct ap_matrix_mdev *assigned_to, + unsigned long *apm, unsigned long *aqm) { unsigned long apid, apqi; - const struct device *dev = mdev_dev(matrix_mdev->mdev); - const char *mdev_name = dev_name(dev);

- for_each_set_bit_inv(apid, apm, AP_DEVICES) + for_each_set_bit_inv(apid, apm, AP_DEVICES) { + for_each_set_bit_inv(apqi, aqm, AP_DOMAINS) { + dev_warn(mdev_dev(assignee->mdev), MDEV_SHARING_ERR, + apid, apqi, dev_name(mdev_dev(assigned_to->mdev))); + } + } +} + +static void vfio_ap_mdev_log_in_use_err(struct ap_matrix_mdev *assignee, + unsigned long *apm, unsigned long *aqm) +{ + unsigned long apid, apqi; + + for_each_set_bit_inv(apid, apm, AP_DEVICES) { for_each_set_bit_inv(apqi, aqm, AP_DOMAINS) - dev_warn(dev, MDEV_SHARING_ERR, apid, apqi, mdev_name); + dev_warn(mdev_dev(assignee->mdev), MDEV_IN_USE_ERR, apid, apqi); + } }

/** * vfio_ap_mdev_verify_no_sharing - verify APQNs are not shared by matrix mdevs * + * @assignee: the matrix mdev to which @mdev_apm and @mdev_aqm are being + * assigned; or, NULL if this function was called by the AP bus + * driver in_use callback to verify none of the APQNs being reserved + * for the host device driver are in use by a vfio_ap mediated device * @mdev_apm: mask indicating the APIDs of the APQNs to be verified * @mdev_aqm: mask indicating the APQIs of the APQNs to be verified * - * Verifies that each APQN derived from the Cartesian product of a bitmap of - * AP adapter IDs and AP queue indexes is not configured for any matrix - * mediated device. AP queue sharing is not allowed. + * Verifies that each APQN derived from the Cartesian product of APIDs + * represented by the bits set in @mdev_apm and the APQIs of the bits set in + * @mdev_aqm is not assigned to a mediated device other than the mdev to which + * the APQN is being assigned (@assignee). AP queue sharing is not allowed. * * Return: 0 if the APQNs are not shared; otherwise return -EADDRINUSE. */ -static int vfio_ap_mdev_verify_no_sharing(unsigned long *mdev_apm, +static int vfio_ap_mdev_verify_no_sharing(struct ap_matrix_mdev *assignee, + unsigned long *mdev_apm, unsigned long *mdev_aqm) { - struct ap_matrix_mdev *matrix_mdev; + struct ap_matrix_mdev *assigned_to; DECLARE_BITMAP(apm, AP_DEVICES); DECLARE_BITMAP(aqm, AP_DOMAINS);

- list_for_each_entry(matrix_mdev, &matrix_dev->mdev_list, node) { + list_for_each_entry(assigned_to, &matrix_dev->mdev_list, node) { /* - * If the input apm and aqm are fields of the matrix_mdev - * object, then move on to the next matrix_mdev. + * If the mdev to which the mdev_apm and mdev_aqm is being + * assigned is the same as the mdev being verified */ - if (mdev_apm == matrix_mdev->matrix.apm && - mdev_aqm == matrix_mdev->matrix.aqm) + if (assignee == assigned_to) continue;

memset(apm, 0, sizeof(apm)); @@ -902,15 +920,16 @@ static int vfio_ap_mdev_verify_no_sharing(unsigned long *mdev_apm, * We work on full longs, as we can only exclude the leftover * bits in non-inverse order. The leftover is all zeros. */ - if (!bitmap_and(apm, mdev_apm, matrix_mdev->matrix.apm, - AP_DEVICES)) + if (!bitmap_and(apm, mdev_apm, assigned_to->matrix.apm, AP_DEVICES)) continue;

- if (!bitmap_and(aqm, mdev_aqm, matrix_mdev->matrix.aqm, - AP_DOMAINS)) + if (!bitmap_and(aqm, mdev_aqm, assigned_to->matrix.aqm, AP_DOMAINS)) continue;

- vfio_ap_mdev_log_sharing_err(matrix_mdev, apm, aqm); + if (assignee) + vfio_ap_mdev_log_sharing_err(assignee, assigned_to, apm, aqm); + else + vfio_ap_mdev_log_in_use_err(assigned_to, apm, aqm);

return -EADDRINUSE; } @@ -939,7 +958,8 @@ static int vfio_ap_mdev_validate_masks(struct ap_matrix_mdev *matrix_mdev) matrix_mdev->matrix.aqm)) return -EADDRNOTAVAIL;

- return vfio_ap_mdev_verify_no_sharing(matrix_mdev->matrix.apm, + return vfio_ap_mdev_verify_no_sharing(matrix_mdev, + matrix_mdev->matrix.apm, matrix_mdev->matrix.aqm); }

@@ -2467,7 +2487,7 @@ int vfio_ap_mdev_resource_in_use(unsigned long *apm, unsigned long *aqm)

mutex_lock(&matrix_dev->guests_lock); mutex_lock(&matrix_dev->mdevs_lock); - ret = vfio_ap_mdev_verify_no_sharing(apm, aqm); + ret = vfio_ap_mdev_verify_no_sharing(NULL, apm, aqm); mutex_unlock(&matrix_dev->mdevs_lock); mutex_unlock(&matrix_dev->guests_lock);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pali Rohár pali@kernel.org

[ Upstream commit 4236ac9fe5b8b42756070d4abfb76fed718e87c2 ]

Old SMB1 servers without CAP_NT_SMBS do not support CIFS_open() function and instead SMBLegacyOpen() needs to be used. This logic is already handled in cifs_open_file() function, which is server->ops->open callback function.

So for querying and creating MF symlinks use open callback function instead of CIFS_open() function directly.

This change fixes querying and creating new MF symlinks on Windows 98. Currently cifs_query_mf_symlink() is not able to detect MF symlink and cifs_create_mf_symlink() is failing with EIO error.

Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/link.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/smb/client/link.c b/fs/smb/client/link.c index 47ddeb7fa1116..aa45ef6ae99a6 100644 --- a/fs/smb/client/link.c +++ b/fs/smb/client/link.c @@ -257,7 +257,7 @@ cifs_query_mf_symlink(unsigned int xid, struct cifs_tcon *tcon, struct cifs_open_parms oparms; struct cifs_io_parms io_parms = {0}; int buf_type = CIFS_NO_BUFFER; - FILE_ALL_INFO file_info; + struct cifs_open_info_data query_data;

oparms = (struct cifs_open_parms) { .tcon = tcon, @@ -269,11 +269,11 @@ cifs_query_mf_symlink(unsigned int xid, struct cifs_tcon *tcon, .fid = &fid, };

- rc = CIFS_open(xid, &oparms, &oplock, &file_info); + rc = tcon->ses->server->ops->open(xid, &oparms, &oplock, &query_data); if (rc) return rc;

- if (file_info.EndOfFile != cpu_to_le64(CIFS_MF_SYMLINK_FILE_SIZE)) { + if (query_data.fi.EndOfFile != cpu_to_le64(CIFS_MF_SYMLINK_FILE_SIZE)) { rc = -ENOENT; /* it's not a symlink */ goto out; @@ -312,7 +312,7 @@ cifs_create_mf_symlink(unsigned int xid, struct cifs_tcon *tcon, .fid = &fid, };

- rc = CIFS_open(xid, &oparms, &oplock, NULL); + rc = tcon->ses->server->ops->open(xid, &oparms, &oplock, NULL); if (rc) return rc;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wang Zhaolong wangzhaolong1@huawei.com

[ Upstream commit 287906b20035a04a234d1a3c64f760a5678387be ]

During mount option processing and negotiation with the server, the original user-specified rsize/wsize values were being modified directly. This makes it impossible to recover these values after a connection reset, leading to potential degraded performance after reconnection.

The other problem is that When negotiating read and write sizes, there are cases where the negotiated values might calculate to zero, especially during reconnection when server->max_read or server->max_write might be reset. In general, these values come from the negotiation response. According to MS-SMB2 specification, these values should be at least 65536 bytes.

This patch improves IO parameter handling:

1. Adds vol_rsize and vol_wsize fields to store the original user-specified values separately from the negotiated values 2. Uses got_rsize/got_wsize flags to determine if values were user-specified rather than checking for non-zero values, which is more reliable 3. Adds a prevent_zero_iosize() helper function to ensure IO sizes are never negotiated down to zero, which could happen in edge cases like when server->max_read/write is zero

The changes make the CIFS client more resilient to unusual server responses and reconnection scenarios, preventing potential failures when IO sizes are calculated to be zero.

Signed-off-by: Wang Zhaolong wangzhaolong1@huawei.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/fs_context.c | 2 ++ fs/smb/client/fs_context.h | 3 +++ fs/smb/client/smb1ops.c | 6 +++--- fs/smb/client/smb2ops.c | 27 +++++++++++++++++++-------- fs/smb/common/smb2pdu.h | 3 +++ 5 files changed, 30 insertions(+), 11 deletions(-)

diff --git a/fs/smb/client/fs_context.c b/fs/smb/client/fs_context.c index 69cca4f17dbaa..b015a4f997cb6 100644 --- a/fs/smb/client/fs_context.c +++ b/fs/smb/client/fs_context.c @@ -1267,6 +1267,7 @@ static int smb3_fs_context_parse_param(struct fs_context *fc, case Opt_rsize: ctx->rsize = result.uint_32; ctx->got_rsize = true; + ctx->vol_rsize = ctx->rsize; break; case Opt_wsize: ctx->wsize = result.uint_32; @@ -1282,6 +1283,7 @@ static int smb3_fs_context_parse_param(struct fs_context *fc, ctx->wsize, PAGE_SIZE); } } + ctx->vol_wsize = ctx->wsize; break; case Opt_acregmax: if (result.uint_32 > CIFS_MAX_ACTIMEO / HZ) { diff --git a/fs/smb/client/fs_context.h b/fs/smb/client/fs_context.h index ac6baa774ad3a..c7e00025518f7 100644 --- a/fs/smb/client/fs_context.h +++ b/fs/smb/client/fs_context.h @@ -263,6 +263,9 @@ struct smb3_fs_context { bool use_client_guid:1; /* reuse existing guid for multichannel */ u8 client_guid[SMB2_CLIENT_GUID_SIZE]; + /* User-specified original r/wsize value */ + unsigned int vol_rsize; + unsigned int vol_wsize; unsigned int bsize; unsigned int rasize; unsigned int rsize; diff --git a/fs/smb/client/smb1ops.c b/fs/smb/client/smb1ops.c index a2dbebd13720b..71fe5aa52630d 100644 --- a/fs/smb/client/smb1ops.c +++ b/fs/smb/client/smb1ops.c @@ -437,8 +437,8 @@ cifs_negotiate_wsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) unsigned int wsize;

/* start with specified wsize, or default */ - if (ctx->wsize) - wsize = ctx->wsize; + if (ctx->got_wsize) + wsize = ctx->vol_wsize; else if (tcon->unix_ext && (unix_cap & CIFS_UNIX_LARGE_WRITE_CAP)) wsize = CIFS_DEFAULT_IOSIZE; else @@ -490,7 +490,7 @@ cifs_negotiate_rsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) else defsize = server->maxBuf - sizeof(READ_RSP);

- rsize = ctx->rsize ? ctx->rsize : defsize; + rsize = ctx->got_rsize ? ctx->vol_rsize : defsize;

/* * no CAP_LARGE_READ_X? Then MS-CIFS states that we must limit this to diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index ff50cdfde5fe4..74bcc51ccd32f 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -467,6 +467,17 @@ smb2_negotiate(const unsigned int xid, return rc; }

+static inline unsigned int +prevent_zero_iosize(unsigned int size, const char *type) +{ + if (size == 0) { + cifs_dbg(VFS, "SMB: Zero %ssize calculated, using minimum value %u\n", + type, CIFS_MIN_DEFAULT_IOSIZE); + return CIFS_MIN_DEFAULT_IOSIZE; + } + return size; +} + static unsigned int smb2_negotiate_wsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) { @@ -474,12 +485,12 @@ smb2_negotiate_wsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) unsigned int wsize;

/* start with specified wsize, or default */ - wsize = ctx->wsize ? ctx->wsize : CIFS_DEFAULT_IOSIZE; + wsize = ctx->got_wsize ? ctx->vol_wsize : CIFS_DEFAULT_IOSIZE; wsize = min_t(unsigned int, wsize, server->max_write); if (!(server->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU)) wsize = min_t(unsigned int, wsize, SMB2_MAX_BUFFER_SIZE);

- return wsize; + return prevent_zero_iosize(wsize, "w"); }

static unsigned int @@ -489,7 +500,7 @@ smb3_negotiate_wsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) unsigned int wsize;

/* start with specified wsize, or default */ - wsize = ctx->wsize ? ctx->wsize : SMB3_DEFAULT_IOSIZE; + wsize = ctx->got_wsize ? ctx->vol_wsize : SMB3_DEFAULT_IOSIZE; wsize = min_t(unsigned int, wsize, server->max_write); #ifdef CONFIG_CIFS_SMB_DIRECT if (server->rdma) { @@ -511,7 +522,7 @@ smb3_negotiate_wsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) if (!(server->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU)) wsize = min_t(unsigned int, wsize, SMB2_MAX_BUFFER_SIZE);

- return wsize; + return prevent_zero_iosize(wsize, "w"); }

static unsigned int @@ -521,13 +532,13 @@ smb2_negotiate_rsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) unsigned int rsize;

/* start with specified rsize, or default */ - rsize = ctx->rsize ? ctx->rsize : CIFS_DEFAULT_IOSIZE; + rsize = ctx->got_rsize ? ctx->vol_rsize : CIFS_DEFAULT_IOSIZE; rsize = min_t(unsigned int, rsize, server->max_read);

if (!(server->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU)) rsize = min_t(unsigned int, rsize, SMB2_MAX_BUFFER_SIZE);

- return rsize; + return prevent_zero_iosize(rsize, "r"); }

static unsigned int @@ -537,7 +548,7 @@ smb3_negotiate_rsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) unsigned int rsize;

/* start with specified rsize, or default */ - rsize = ctx->rsize ? ctx->rsize : SMB3_DEFAULT_IOSIZE; + rsize = ctx->got_rsize ? ctx->vol_rsize : SMB3_DEFAULT_IOSIZE; rsize = min_t(unsigned int, rsize, server->max_read); #ifdef CONFIG_CIFS_SMB_DIRECT if (server->rdma) { @@ -560,7 +571,7 @@ smb3_negotiate_rsize(struct cifs_tcon *tcon, struct smb3_fs_context *ctx) if (!(server->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU)) rsize = min_t(unsigned int, rsize, SMB2_MAX_BUFFER_SIZE);

- return rsize; + return prevent_zero_iosize(rsize, "r"); }

/* diff --git a/fs/smb/common/smb2pdu.h b/fs/smb/common/smb2pdu.h index 9f272cc8f5660..0a4ca286f4169 100644 --- a/fs/smb/common/smb2pdu.h +++ b/fs/smb/common/smb2pdu.h @@ -95,6 +95,9 @@ */ #define SMB3_DEFAULT_IOSIZE (4 * 1024 * 1024)

+/* According to MS-SMB2 specification The minimum recommended value is 65536.*/ +#define CIFS_MIN_DEFAULT_IOSIZE (65536) + /* * SMB2 Header Definition *

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sungjong Seo sj1557.seo@samsung.com

[ Upstream commit c73e680d1f84059e1b1ea82a537f6ccc1c563eb4 ]

With commit 11a347fb6cef ("exfat: change to get file size from DataLength"), exfat_get_block() can now handle valid_size. However, most partial unwritten blocks that could be mapped with other blocks are being inefficiently processed separately as individual blocks.

Except for partial unwritten blocks that require independent processing, let's handle them simply as before.

Signed-off-by: Sungjong Seo sj1557.seo@samsung.com Reviewed-by: Yuezhang Mo Yuezhang.Mo@sony.com Signed-off-by: Namjae Jeon linkinjeon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/exfat/inode.c | 159 +++++++++++++++++++++++------------------------ 1 file changed, 77 insertions(+), 82 deletions(-)

diff --git a/fs/exfat/inode.c b/fs/exfat/inode.c index 3801516ac5071..cc4dcb7a32b57 100644 --- a/fs/exfat/inode.c +++ b/fs/exfat/inode.c @@ -274,9 +274,11 @@ static int exfat_get_block(struct inode *inode, sector_t iblock, sector_t last_block; sector_t phys = 0; sector_t valid_blks; + loff_t i_size;

mutex_lock(&sbi->s_lock); - last_block = EXFAT_B_TO_BLK_ROUND_UP(i_size_read(inode), sb); + i_size = i_size_read(inode); + last_block = EXFAT_B_TO_BLK_ROUND_UP(i_size, sb); if (iblock >= last_block && !create) goto done;

@@ -305,102 +307,95 @@ static int exfat_get_block(struct inode *inode, sector_t iblock, if (buffer_delay(bh_result)) clear_buffer_delay(bh_result);

- if (create) { + /* + * In most cases, we just need to set bh_result to mapped, unmapped + * or new status as follows: + * 1. i_size == valid_size + * 2. write case (create == 1) + * 3. direct_read (!bh_result->b_folio) + * -> the unwritten part will be zeroed in exfat_direct_IO() + * + * Otherwise, in the case of buffered read, it is necessary to take + * care the last nested block if valid_size is not equal to i_size. + */ + if (i_size == ei->valid_size || create || !bh_result->b_folio) valid_blks = EXFAT_B_TO_BLK_ROUND_UP(ei->valid_size, sb); + else + valid_blks = EXFAT_B_TO_BLK(ei->valid_size, sb);

- if (iblock + max_blocks < valid_blks) { - /* The range has been written, map it */ - goto done; - } else if (iblock < valid_blks) { - /* - * The range has been partially written, - * map the written part. - */ - max_blocks = valid_blks - iblock; - goto done; - } + /* The range has been fully written, map it */ + if (iblock + max_blocks < valid_blks) + goto done;

- /* The area has not been written, map and mark as new. */ - set_buffer_new(bh_result); + /* The range has been partially written, map the written part */ + if (iblock < valid_blks) { + max_blocks = valid_blks - iblock; + goto done; + }

+ /* The area has not been written, map and mark as new for create case */ + if (create) { + set_buffer_new(bh_result); ei->valid_size = EXFAT_BLK_TO_B(iblock + max_blocks, sb); mark_inode_dirty(inode); - } else { - valid_blks = EXFAT_B_TO_BLK(ei->valid_size, sb); + goto done; + }

- if (iblock + max_blocks < valid_blks) { - /* The range has been written, map it */ - goto done; - } else if (iblock < valid_blks) { - /* - * The area has been partially written, - * map the written part. - */ - max_blocks = valid_blks - iblock; + /* + * The area has just one block partially written. + * In that case, we should read and fill the unwritten part of + * a block with zero. + */ + if (bh_result->b_folio && iblock == valid_blks && + (ei->valid_size & (sb->s_blocksize - 1))) { + loff_t size, pos; + void *addr; + + max_blocks = 1; + + /* + * No buffer_head is allocated. + * (1) bmap: It's enough to set blocknr without I/O. + * (2) read: The unwritten part should be filled with zero. + * If a folio does not have any buffers, + * let's returns -EAGAIN to fallback to + * block_read_full_folio() for per-bh IO. + */ + if (!folio_buffers(bh_result->b_folio)) { + err = -EAGAIN; goto done; - } else if (iblock == valid_blks && - (ei->valid_size & (sb->s_blocksize - 1))) { - /* - * The block has been partially written, - * zero the unwritten part and map the block. - */ - loff_t size, pos; - void *addr; - - max_blocks = 1; - - /* - * For direct read, the unwritten part will be zeroed in - * exfat_direct_IO() - */ - if (!bh_result->b_folio) - goto done; - - /* - * No buffer_head is allocated. - * (1) bmap: It's enough to fill bh_result without I/O. - * (2) read: The unwritten part should be filled with 0 - * If a folio does not have any buffers, - * let's returns -EAGAIN to fallback to - * per-bh IO like block_read_full_folio(). - */ - if (!folio_buffers(bh_result->b_folio)) { - err = -EAGAIN; - goto done; - } + }

- pos = EXFAT_BLK_TO_B(iblock, sb); - size = ei->valid_size - pos; - addr = folio_address(bh_result->b_folio) + - offset_in_folio(bh_result->b_folio, pos); + pos = EXFAT_BLK_TO_B(iblock, sb); + size = ei->valid_size - pos; + addr = folio_address(bh_result->b_folio) + + offset_in_folio(bh_result->b_folio, pos);

- /* Check if bh->b_data points to proper addr in folio */ - if (bh_result->b_data != addr) { - exfat_fs_error_ratelimit(sb, + /* Check if bh->b_data points to proper addr in folio */ + if (bh_result->b_data != addr) { + exfat_fs_error_ratelimit(sb, "b_data(%p) != folio_addr(%p)", bh_result->b_data, addr); - err = -EINVAL; - goto done; - } - - /* Read a block */ - err = bh_read(bh_result, 0); - if (err < 0) - goto done; + err = -EINVAL; + goto done; + }

- /* Zero unwritten part of a block */ - memset(bh_result->b_data + size, 0, - bh_result->b_size - size); + /* Read a block */ + err = bh_read(bh_result, 0); + if (err < 0) + goto done;

- err = 0; - } else { - /* - * The range has not been written, clear the mapped flag - * to only zero the cache and do not read from disk. - */ - clear_buffer_mapped(bh_result); - } + /* Zero unwritten part of a block */ + memset(bh_result->b_data + size, 0, bh_result->b_size - size); + err = 0; + goto done; } + + /* + * The area has not been written, clear mapped for read/bmap cases. + * If so, it will be filled with zero without reading from disk. + */ + clear_buffer_mapped(bh_result); done: bh_result->b_size = EXFAT_BLK_TO_B(max_blocks, sb); if (err < 0)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust trond.myklebust@hammerspace.com

[ Upstream commit 9e8f324bd44c1fe026b582b75213de4eccfa1163 ]

Check that the delegation is still attached after taking the spin lock in nfs_start_delegation_return_locked().

Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/delegation.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c index 325ba0663a6de..8bdbc4dca89ca 100644 --- a/fs/nfs/delegation.c +++ b/fs/nfs/delegation.c @@ -307,7 +307,8 @@ nfs_start_delegation_return_locked(struct nfs_inode *nfsi) if (delegation == NULL) goto out; spin_lock(&delegation->lock); - if (!test_and_set_bit(NFS_DELEGATION_RETURNING, &delegation->flags)) { + if (delegation->inode && + !test_and_set_bit(NFS_DELEGATION_RETURNING, &delegation->flags)) { clear_bit(NFS_DELEGATION_RETURN_DELAYED, &delegation->flags); /* Refcount matched in nfs_end_delegation_return() */ ret = nfs_get_delegation(delegation);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust trond.myklebust@hammerspace.com

[ Upstream commit 14e41b16e8cb677bb440dca2edba8b041646c742 ]

Once a task calls exit_signals() it can no longer be signalled. So do not allow it to do killable waits.

Reviewed-by: Jeff Layton jlayton@kernel.org Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/sched.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index 9b45fbdc90cab..73bc39281ef5f 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -276,6 +276,8 @@ EXPORT_SYMBOL_GPL(rpc_destroy_wait_queue);

static int rpc_wait_bit_killable(struct wait_bit_key *key, int mode) { + if (unlikely(current->flags & PF_EXITING)) + return -EINTR; schedule(); if (signal_pending_state(mode, current)) return -ERESTARTSYS;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yi Liu yi.l.liu@intel.com

[ Upstream commit 803f97298e7de9242eb677a1351dcafbbcc9117e ]

PASID usage requires PASID support in both device and IOMMU. Since the iommu drivers always enable the PASID capability for the device if it is supported, this extends the IOMMU_GET_HW_INFO to report the PASID capability to userspace. Also, enhances the selftest accordingly.

Link: https://patch.msgid.link/r/20250321180143.8468-5-yi.l.liu@intel.com Cc: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Kevin Tian kevin.tian@intel.com Reviewed-by: Jason Gunthorpe jgg@nvidia.com Tested-by: Zhangfei Gao zhangfei.gao@linaro.org #aarch64 platform Tested-by: Nicolin Chen nicolinc@nvidia.com Signed-off-by: Yi Liu yi.l.liu@intel.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/iommufd/device.c | 34 +++++++++++++++++++++++++++++++++- drivers/pci/ats.c | 33 +++++++++++++++++++++++++++++++++ include/linux/pci-ats.h | 3 +++ include/uapi/linux/iommufd.h | 14 +++++++++++++- 4 files changed, 82 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/iommufd/device.c b/drivers/iommu/iommufd/device.c index 3fd8920e79ffb..74480ae6bfc0b 100644 --- a/drivers/iommu/iommufd/device.c +++ b/drivers/iommu/iommufd/device.c @@ -3,6 +3,7 @@ */ #include <linux/iommu.h> #include <linux/iommufd.h> +#include <linux/pci-ats.h> #include <linux/slab.h> #include <uapi/linux/iommufd.h>

@@ -1304,7 +1305,8 @@ int iommufd_get_hw_info(struct iommufd_ucmd *ucmd) void *data; int rc;

- if (cmd->flags || cmd->__reserved) + if (cmd->flags || cmd->__reserved[0] || cmd->__reserved[1] || + cmd->__reserved[2]) return -EOPNOTSUPP;

idev = iommufd_get_device(ucmd, cmd->dev_id); @@ -1361,6 +1363,36 @@ int iommufd_get_hw_info(struct iommufd_ucmd *ucmd) if (device_iommu_capable(idev->dev, IOMMU_CAP_DIRTY_TRACKING)) cmd->out_capabilities |= IOMMU_HW_CAP_DIRTY_TRACKING;

+ cmd->out_max_pasid_log2 = 0; + /* + * Currently, all iommu drivers enable PASID in the probe_device() + * op if iommu and device supports it. So the max_pasids stored in + * dev->iommu indicates both PASID support and enable status. A + * non-zero dev->iommu->max_pasids means PASID is supported and + * enabled. The iommufd only reports PASID capability to userspace + * if it's enabled. + */ + if (idev->dev->iommu->max_pasids) { + cmd->out_max_pasid_log2 = ilog2(idev->dev->iommu->max_pasids); + + if (dev_is_pci(idev->dev)) { + struct pci_dev *pdev = to_pci_dev(idev->dev); + int ctrl; + + ctrl = pci_pasid_status(pdev); + + WARN_ON_ONCE(ctrl < 0 || + !(ctrl & PCI_PASID_CTRL_ENABLE)); + + if (ctrl & PCI_PASID_CTRL_EXEC) + cmd->out_capabilities |= + IOMMU_HW_CAP_PCI_PASID_EXEC; + if (ctrl & PCI_PASID_CTRL_PRIV) + cmd->out_capabilities |= + IOMMU_HW_CAP_PCI_PASID_PRIV; + } + } + rc = iommufd_ucmd_respond(ucmd, sizeof(*cmd)); out_free: kfree(data); diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c index 6afff1f1b1430..c331b108e71de 100644 --- a/drivers/pci/ats.c +++ b/drivers/pci/ats.c @@ -538,4 +538,37 @@ int pci_max_pasids(struct pci_dev *pdev) return (1 << FIELD_GET(PCI_PASID_CAP_WIDTH, supported)); } EXPORT_SYMBOL_GPL(pci_max_pasids); + +/** + * pci_pasid_status - Check the PASID status + * @pdev: PCI device structure + * + * Returns a negative value when no PASID capability is present. + * Otherwise the value of the control register is returned. + * Status reported are: + * + * PCI_PASID_CTRL_ENABLE - PASID enabled + * PCI_PASID_CTRL_EXEC - Execute permission enabled + * PCI_PASID_CTRL_PRIV - Privileged mode enabled + */ +int pci_pasid_status(struct pci_dev *pdev) +{ + int pasid; + u16 ctrl; + + if (pdev->is_virtfn) + pdev = pci_physfn(pdev); + + pasid = pdev->pasid_cap; + if (!pasid) + return -EINVAL; + + pci_read_config_word(pdev, pasid + PCI_PASID_CTRL, &ctrl); + + ctrl &= PCI_PASID_CTRL_ENABLE | PCI_PASID_CTRL_EXEC | + PCI_PASID_CTRL_PRIV; + + return ctrl; +} +EXPORT_SYMBOL_GPL(pci_pasid_status); #endif /* CONFIG_PCI_PASID */ diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h index 0e8b74e63767a..75c6c86cf09dc 100644 --- a/include/linux/pci-ats.h +++ b/include/linux/pci-ats.h @@ -42,6 +42,7 @@ int pci_enable_pasid(struct pci_dev *pdev, int features); void pci_disable_pasid(struct pci_dev *pdev); int pci_pasid_features(struct pci_dev *pdev); int pci_max_pasids(struct pci_dev *pdev); +int pci_pasid_status(struct pci_dev *pdev); #else /* CONFIG_PCI_PASID */ static inline int pci_enable_pasid(struct pci_dev *pdev, int features) { return -EINVAL; } @@ -50,6 +51,8 @@ static inline int pci_pasid_features(struct pci_dev *pdev) { return -EINVAL; } static inline int pci_max_pasids(struct pci_dev *pdev) { return -EINVAL; } +static inline int pci_pasid_status(struct pci_dev *pdev) +{ return -EINVAL; } #endif /* CONFIG_PCI_PASID */

#endif /* LINUX_PCI_ATS_H */ diff --git a/include/uapi/linux/iommufd.h b/include/uapi/linux/iommufd.h index 8c4470742dcd9..41048271a0667 100644 --- a/include/uapi/linux/iommufd.h +++ b/include/uapi/linux/iommufd.h @@ -504,9 +504,17 @@ enum iommu_hw_info_type { * IOMMU_HWPT_GET_DIRTY_BITMAP * IOMMU_HWPT_SET_DIRTY_TRACKING * + * @IOMMU_HW_CAP_PCI_PASID_EXEC: Execute Permission Supported, user ignores it + * when the struct + * iommu_hw_info::out_max_pasid_log2 is zero. + * @IOMMU_HW_CAP_PCI_PASID_PRIV: Privileged Mode Supported, user ignores it + * when the struct + * iommu_hw_info::out_max_pasid_log2 is zero. */ enum iommufd_hw_capabilities { IOMMU_HW_CAP_DIRTY_TRACKING = 1 << 0, + IOMMU_HW_CAP_PCI_PASID_EXEC = 1 << 1, + IOMMU_HW_CAP_PCI_PASID_PRIV = 1 << 2, };

/** @@ -522,6 +530,9 @@ enum iommufd_hw_capabilities { * iommu_hw_info_type. * @out_capabilities: Output the generic iommu capability info type as defined * in the enum iommu_hw_capabilities. + * @out_max_pasid_log2: Output the width of PASIDs. 0 means no PASID support. + * PCI devices turn to out_capabilities to check if the + * specific capabilities is supported or not. * @__reserved: Must be 0 * * Query an iommu type specific hardware information data from an iommu behind @@ -545,7 +556,8 @@ struct iommu_hw_info { __u32 data_len; __aligned_u64 data_uptr; __u32 out_data_type; - __u32 __reserved; + __u8 out_max_pasid_log2; + __u8 __reserved[3]; __aligned_u64 out_capabilities; }; #define IOMMU_GET_HW_INFO _IO(IOMMUFD_TYPE, IOMMUFD_CMD_GET_HW_INFO)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Diogo Ivo diogo.ivo@siemens.com

[ Upstream commit f06777cf2bbc21dd8c71d6e3906934e56b4e18e4 ]

Intel Over-Clocking Watchdogs are described in ACPI tables by both the generic PNP0C02 _CID and their ACPI _HID. The presence of the _CID then causes the PNP scan handler to attach to the watchdog, preventing the actual watchdog driver from binding. Address this by adding the ACPI _HIDs to the list of non-PNP devices, so that the PNP scan handler is bypassed.

Note that these watchdogs can be described by multiple _HIDs for what seems to be identical hardware. This commit is not a complete list of all the possible watchdog ACPI _HIDs.

Signed-off-by: Diogo Ivo diogo.ivo@siemens.com Link: https://patch.msgid.link/20250317-ivo-intel_oc_wdt-v3-2-32c396f4eefd@siemens... Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpi_pnp.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/acpi/acpi_pnp.c b/drivers/acpi/acpi_pnp.c index 01abf26764b00..3f5a1840f5733 100644 --- a/drivers/acpi/acpi_pnp.c +++ b/drivers/acpi/acpi_pnp.c @@ -355,8 +355,10 @@ static bool acpi_pnp_match(const char *idstr, const struct acpi_device_id **matc * device represented by it. */ static const struct acpi_device_id acpi_nonpnp_device_ids[] = { + {"INT3F0D"}, {"INTC1080"}, {"INTC1081"}, + {"INTC1099"}, {""}, };

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sudeep Holla sudeep.holla@arm.com

[ Upstream commit d181acea5b864e91f38f5771b8961215ce5017ae ]

The Platform Communication Channel (PCC) mailbox driver currently uses ioremap() to map channel shared memory regions. However it is preferred to use acpi_os_ioremap(), which is mapping function specific to EFI/ACPI defined memory regions. It ensures that the correct memory attributes are applied when mapping ACPI-provided regions.

While at it, also add checks for handling any errors with the mapping.

Acked-by: Huisong Li lihuisong@huawei.com Tested-by: Huisong Li lihuisong@huawei.com Tested-by: Adam Young admiyo@os.amperecomputing.com Signed-off-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Jassi Brar jassisinghbrar@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mailbox/pcc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c index f8215a8f656a4..49254d99a8ad6 100644 --- a/drivers/mailbox/pcc.c +++ b/drivers/mailbox/pcc.c @@ -419,8 +419,12 @@ int pcc_mbox_ioremap(struct mbox_chan *chan) return -1; pchan_info = chan->con_priv; pcc_mbox_chan = &pchan_info->chan; - pcc_mbox_chan->shmem = ioremap(pcc_mbox_chan->shmem_base_addr, - pcc_mbox_chan->shmem_size); + + pcc_mbox_chan->shmem = acpi_os_ioremap(pcc_mbox_chan->shmem_base_addr, + pcc_mbox_chan->shmem_size); + if (!pcc_mbox_chan->shmem) + return -ENXIO; + return 0; } EXPORT_SYMBOL_GPL(pcc_mbox_ioremap);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shixiong Ou oushixiong@kylinos.cn

[ Upstream commit 86d16cd12efa547ed43d16ba7a782c1251c80ea8 ]

Call device_remove_file() when driver remove.

Signed-off-by: Shixiong Ou oushixiong@kylinos.cn Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/fsl-diu-fb.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/fsl-diu-fb.c b/drivers/video/fbdev/fsl-diu-fb.c index 5ac8201c35337..b71d15794ce8b 100644 --- a/drivers/video/fbdev/fsl-diu-fb.c +++ b/drivers/video/fbdev/fsl-diu-fb.c @@ -1827,6 +1827,7 @@ static void fsl_diu_remove(struct platform_device *pdev) int i;

data = dev_get_drvdata(&pdev->dev); + device_remove_file(&pdev->dev, &data->dev_attr); disable_lcdc(&data->fsl_diu_info[0]);

free_irq(data->irq, data->diu_reg);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zsolt Kajtar soci@c64.rulez.org

[ Upstream commit 76d3ca89981354e1f85a3e0ad9ac4217d351cc72 ]

I was wondering why there's garbage at the bottom of the screen when tile blitting is used with an odd mode like 1080, 600 or 200. Sure there's only space for half a tile but the same area is clean when the buffer is bitmap.

Then later I found that it's supposed to be cleaned but that's not implemented. So I took what's in bitblit and adapted it for tileblit.

This implementation was tested for both the horizontal and vertical case, and now does the same as what's done for bitmap buffers.

If anyone is interested to reproduce the problem then I could bet that'd be on a S3 or Ark. Just set up a mode with an odd line count and make sure that the virtual size covers the complete tile at the bottom. E.g. for 600 lines that's 608 virtual lines for a 16 tall tile. Then the bottom area should be cleaned.

For the right side it's more difficult as there the drivers won't let an odd size happen, unless the code is modified. But once it reports back a few pixel columns short then fbcon won't use the last column. With the patch that column is now clean.

Btw. the virtual size should be rounded up by the driver for both axes (not only the horizontal) so that it's dividable by the tile size. That's a driver bug but correcting it is not in scope for this patch.

Implement missing margin clearing for tileblit

Signed-off-by: Zsolt Kajtar soci@c64.rulez.org Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/core/tileblit.c | 37 ++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/core/tileblit.c b/drivers/video/fbdev/core/tileblit.c index 45b0828fad1cf..d342b90c42b7f 100644 --- a/drivers/video/fbdev/core/tileblit.c +++ b/drivers/video/fbdev/core/tileblit.c @@ -74,7 +74,42 @@ static void tile_putcs(struct vc_data *vc, struct fb_info *info, static void tile_clear_margins(struct vc_data *vc, struct fb_info *info, int color, int bottom_only) { - return; + unsigned int cw = vc->vc_font.width; + unsigned int ch = vc->vc_font.height; + unsigned int rw = info->var.xres - (vc->vc_cols*cw); + unsigned int bh = info->var.yres - (vc->vc_rows*ch); + unsigned int rs = info->var.xres - rw; + unsigned int bs = info->var.yres - bh; + unsigned int vwt = info->var.xres_virtual / cw; + unsigned int vht = info->var.yres_virtual / ch; + struct fb_tilerect rect; + + rect.index = vc->vc_video_erase_char & + ((vc->vc_hi_font_mask) ? 0x1ff : 0xff); + rect.fg = color; + rect.bg = color; + + if ((int) rw > 0 && !bottom_only) { + rect.sx = (info->var.xoffset + rs + cw - 1) / cw; + rect.sy = 0; + rect.width = (rw + cw - 1) / cw; + rect.height = vht; + if (rect.width + rect.sx > vwt) + rect.width = vwt - rect.sx; + if (rect.sx < vwt) + info->tileops->fb_tilefill(info, &rect); + } + + if ((int) bh > 0) { + rect.sx = info->var.xoffset / cw; + rect.sy = (info->var.yoffset + bs) / ch; + rect.width = rs / cw; + rect.height = (bh + ch - 1) / ch; + if (rect.height + rect.sy > vht) + rect.height = vht - rect.sy; + if (rect.sy < vht) + info->tileops->fb_tilefill(info, &rect); + } }

static void tile_cursor(struct vc_data *vc, struct fb_info *info, bool enable,

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Namjae Jeon linkinjeon@kernel.org

[ Upstream commit eeb827f2922eb07ffbf7d53569cc95b38272646f ]

cifs.ko is missing validation check when accessing smb_aces. This patch add validation check for the fields in smb_aces.

Signed-off-by: Namjae Jeon linkinjeon@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/cifsacl.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/fs/smb/client/cifsacl.c b/fs/smb/client/cifsacl.c index e36f0e2d7d21e..9a73478e00688 100644 --- a/fs/smb/client/cifsacl.c +++ b/fs/smb/client/cifsacl.c @@ -811,7 +811,23 @@ static void parse_dacl(struct smb_acl *pdacl, char *end_of_acl, return;

for (i = 0; i < num_aces; ++i) { + if (end_of_acl - acl_base < acl_size) + break; + ppace[i] = (struct smb_ace *) (acl_base + acl_size); + acl_base = (char *)ppace[i]; + acl_size = offsetof(struct smb_ace, sid) + + offsetof(struct smb_sid, sub_auth); + + if (end_of_acl - acl_base < acl_size || + ppace[i]->sid.num_subauth == 0 || + ppace[i]->sid.num_subauth > SID_MAX_SUB_AUTHORITIES || + (end_of_acl - acl_base < + acl_size + sizeof(__le32) * ppace[i]->sid.num_subauth) || + (le16_to_cpu(ppace[i]->size) < + acl_size + sizeof(__le32) * ppace[i]->sid.num_subauth)) + break; + #ifdef CONFIG_CIFS_DEBUG2 dump_ace(ppace[i], end_of_acl); #endif @@ -855,7 +871,6 @@ static void parse_dacl(struct smb_acl *pdacl, char *end_of_acl, (void *)ppace[i], sizeof(struct smb_ace)); */

- acl_base = (char *)ppace[i]; acl_size = le16_to_cpu(ppace[i]->size); }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust trond.myklebust@hammerspace.com

[ Upstream commit 0af5fb5ed3d2fd9e110c6112271f022b744a849a ]

If a containerised process is killed and causes an ENETUNREACH or ENETDOWN error to be propagated to the state manager, then mark the nfs_client as being dead so that we don't loop in functions that are expecting recovery to succeed.

Reviewed-by: Jeff Layton jlayton@kernel.org Reviewed-by: Benjamin Coddington bcodding@redhat.com Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs4state.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index dafd61186557f..397a86011878f 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -2740,7 +2740,15 @@ static void nfs4_state_manager(struct nfs_client *clp) pr_warn_ratelimited("NFS: state manager%s%s failed on NFSv4 server %s" " with error %d\n", section_sep, section, clp->cl_hostname, -status); - ssleep(1); + switch (status) { + case -ENETDOWN: + case -ENETUNREACH: + nfs_mark_client_ready(clp, -EIO); + break; + default: + ssleep(1); + break; + } out_drain: memalloc_nofs_restore(memflags); nfs4_end_drain_session(clp);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust trond.myklebust@hammerspace.com

[ Upstream commit 214c13e380ad7636631279f426387f9c4e3c14d9 ]

If we already had a valid port number for the RPC service, then we should not allow the rpcbind client to set it to the invalid value '0'.

Reviewed-by: Jeff Layton jlayton@kernel.org Reviewed-by: Benjamin Coddington bcodding@redhat.com Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/rpcb_clnt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c index 102c3818bc54d..53bcca365fb1c 100644 --- a/net/sunrpc/rpcb_clnt.c +++ b/net/sunrpc/rpcb_clnt.c @@ -820,9 +820,10 @@ static void rpcb_getport_done(struct rpc_task *child, void *data) }

trace_rpcb_setport(child, map->r_status, map->r_port); - xprt->ops->set_port(xprt, map->r_port); - if (map->r_port) + if (map->r_port) { + xprt->ops->set_port(xprt, map->r_port); xprt_set_bound(xprt); + } }

/*

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

[ Upstream commit 060fac202eb8e5c83961f0e0bf6dad8ab6e46643 ]

VI sense port on WSA883x speaker takes only one channel, so use 0x1 as channel mask. This fixes garbage being recorded by the speaker when testing the VI sense feedback path.

Cc: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://patch.msgid.link/20250312-asoc-wsa88xx-visense-v1-2-9ca705881122@lin... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wsa884x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wsa884x.c b/sound/soc/codecs/wsa884x.c index 560a2c04b6955..18b0ee8f15a55 100644 --- a/sound/soc/codecs/wsa884x.c +++ b/sound/soc/codecs/wsa884x.c @@ -891,7 +891,7 @@ static const struct sdw_port_config wsa884x_pconfig[WSA884X_MAX_SWR_PORTS] = { }, [WSA884X_PORT_VISENSE] = { .num = WSA884X_PORT_VISENSE + 1, - .ch_mask = 0x3, + .ch_mask = 0x1, }, [WSA884X_PORT_CPS] = { .num = WSA884X_PORT_CPS + 1,

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Hsu d486250@gmail.com

[ Upstream commit 70facbf978ac90c6da17a3de2a8dd111b06f1bac ]

Previously, the condition for invalidating the tx flow in mctp_i2c_invalidate_tx_flow() checked if `rc` was nonzero. However, this could incorrectly trigger the invalidation even when `rc > 0` was returned as a success status.

This patch updates the condition to explicitly check for `rc < 0`, ensuring that only error cases trigger the invalidation.

Signed-off-by: Daniel Hsu Daniel-Hsu@quantatw.com Reviewed-by: Jeremy Kerr jk@codeconstruct.com.au Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/mctp/mctp-i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/mctp/mctp-i2c.c b/drivers/net/mctp/mctp-i2c.c index 6622de48fc9e7..503a9174321c6 100644 --- a/drivers/net/mctp/mctp-i2c.c +++ b/drivers/net/mctp/mctp-i2c.c @@ -538,7 +538,7 @@ static void mctp_i2c_xmit(struct mctp_i2c_dev *midev, struct sk_buff *skb) rc = __i2c_transfer(midev->adapter, &msg, 1);

/* on tx errors, the flow can no longer be considered valid */ - if (rc) + if (rc < 0) mctp_i2c_invalidate_tx_flow(midev, skb);

break;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans-Frieder Vogt hfdevel@gmx.net

[ Upstream commit 25b6a6d29d4082f6ac231c056ac321a996eb55c9 ]

In case of an AQR105-based device, create a software node for the mdio function, with a child node for the Aquantia AQR105 PHY, providing a firmware-name (and a bit more, which may be used for future checks) to allow the PHY to load a MAC specific firmware from the file system.

The name of the PHY software node follows the naming convention suggested in the patch for the mdiobus_scan function (in the same patch series).

Signed-off-by: Hans-Frieder Vogt hfdevel@gmx.net Reviewed-by: Andrew Lunn andrew@lunn.ch Link: https://patch.msgid.link/20250322-tn9510-v3a-v7-5-672a9a3d8628@gmx.net Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/tehuti/tn40.c | 5 +- drivers/net/ethernet/tehuti/tn40.h | 33 ++++++++++ drivers/net/ethernet/tehuti/tn40_mdio.c | 82 ++++++++++++++++++++++++- 3 files changed, 117 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/tehuti/tn40.c b/drivers/net/ethernet/tehuti/tn40.c index a6965258441c4..558b791a97edd 100644 --- a/drivers/net/ethernet/tehuti/tn40.c +++ b/drivers/net/ethernet/tehuti/tn40.c @@ -1778,7 +1778,7 @@ static int tn40_probe(struct pci_dev *pdev, const struct pci_device_id *ent) ret = tn40_phy_register(priv); if (ret) { dev_err(&pdev->dev, "failed to set up PHY.\n"); - goto err_free_irq; + goto err_cleanup_swnodes; }

ret = tn40_priv_init(priv); @@ -1795,6 +1795,8 @@ static int tn40_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; err_unregister_phydev: tn40_phy_unregister(priv); +err_cleanup_swnodes: + tn40_swnodes_cleanup(priv); err_free_irq: pci_free_irq_vectors(pdev); err_unset_drvdata: @@ -1816,6 +1818,7 @@ static void tn40_remove(struct pci_dev *pdev) unregister_netdev(ndev);

tn40_phy_unregister(priv); + tn40_swnodes_cleanup(priv); pci_free_irq_vectors(priv->pdev); pci_set_drvdata(pdev, NULL); iounmap(priv->regs); diff --git a/drivers/net/ethernet/tehuti/tn40.h b/drivers/net/ethernet/tehuti/tn40.h index 490781fe51205..25da8686d4691 100644 --- a/drivers/net/ethernet/tehuti/tn40.h +++ b/drivers/net/ethernet/tehuti/tn40.h @@ -4,10 +4,13 @@ #ifndef _TN40_H_ #define _TN40_H_

+#include <linux/property.h> #include "tn40_regs.h"

#define TN40_DRV_NAME "tn40xx"

+#define PCI_DEVICE_ID_TEHUTI_TN9510 0x4025 + #define TN40_MDIO_SPEED_1MHZ (1) #define TN40_MDIO_SPEED_6MHZ (6)

@@ -102,10 +105,39 @@ struct tn40_txdb { int size; /* Number of elements in the db */ };

+#define NODE_PROP(_NAME, _PROP) ( \ + (const struct software_node) { \ + .name = _NAME, \ + .properties = _PROP, \ + }) + +#define NODE_PAR_PROP(_NAME, _PAR, _PROP) ( \ + (const struct software_node) { \ + .name = _NAME, \ + .parent = _PAR, \ + .properties = _PROP, \ + }) + +enum tn40_swnodes { + SWNODE_MDIO, + SWNODE_PHY, + SWNODE_MAX +}; + +struct tn40_nodes { + char phy_name[32]; + char mdio_name[32]; + struct property_entry phy_props[3]; + struct software_node swnodes[SWNODE_MAX]; + const struct software_node *group[SWNODE_MAX + 1]; +}; + struct tn40_priv { struct net_device *ndev; struct pci_dev *pdev;

+ struct tn40_nodes nodes; + struct napi_struct napi; /* RX FIFOs: 1 for data (full) descs, and 2 for free descs */ struct tn40_rxd_fifo rxd_fifo0; @@ -225,6 +257,7 @@ static inline void tn40_write_reg(struct tn40_priv *priv, u32 reg, u32 val)

int tn40_set_link_speed(struct tn40_priv *priv, u32 speed);

+void tn40_swnodes_cleanup(struct tn40_priv *priv); int tn40_mdiobus_init(struct tn40_priv *priv);

int tn40_phy_register(struct tn40_priv *priv); diff --git a/drivers/net/ethernet/tehuti/tn40_mdio.c b/drivers/net/ethernet/tehuti/tn40_mdio.c index af18615d64a8a..5bb0cbc87d064 100644 --- a/drivers/net/ethernet/tehuti/tn40_mdio.c +++ b/drivers/net/ethernet/tehuti/tn40_mdio.c @@ -14,6 +14,8 @@ (FIELD_PREP(TN40_MDIO_PRTAD_MASK, (port)))) #define TN40_MDIO_CMD_READ BIT(15)

+#define AQR105_FIRMWARE "tehuti/aqr105-tn40xx.cld" + static void tn40_mdio_set_speed(struct tn40_priv *priv, u32 speed) { void __iomem *regs = priv->regs; @@ -111,6 +113,56 @@ static int tn40_mdio_write_c45(struct mii_bus *mii_bus, int addr, int devnum, return tn40_mdio_write(mii_bus->priv, addr, devnum, regnum, val); }

+/* registers an mdio node and an aqr105 PHY at address 1 + * tn40_mdio-%id { + * ethernet-phy@1 { + * compatible = "ethernet-phy-id03a1.b4a3"; + * reg = <1>; + * firmware-name = AQR105_FIRMWARE; + * }; + * }; + */ +static int tn40_swnodes_register(struct tn40_priv *priv) +{ + struct tn40_nodes *nodes = &priv->nodes; + struct pci_dev *pdev = priv->pdev; + struct software_node *swnodes; + u32 id; + + id = pci_dev_id(pdev); + + snprintf(nodes->phy_name, sizeof(nodes->phy_name), "ethernet-phy@1"); + snprintf(nodes->mdio_name, sizeof(nodes->mdio_name), "tn40_mdio-%x", + id); + + swnodes = nodes->swnodes; + + swnodes[SWNODE_MDIO] = NODE_PROP(nodes->mdio_name, NULL); + + nodes->phy_props[0] = PROPERTY_ENTRY_STRING("compatible", + "ethernet-phy-id03a1.b4a3"); + nodes->phy_props[1] = PROPERTY_ENTRY_U32("reg", 1); + nodes->phy_props[2] = PROPERTY_ENTRY_STRING("firmware-name", + AQR105_FIRMWARE); + swnodes[SWNODE_PHY] = NODE_PAR_PROP(nodes->phy_name, + &swnodes[SWNODE_MDIO], + nodes->phy_props); + + nodes->group[SWNODE_PHY] = &swnodes[SWNODE_PHY]; + nodes->group[SWNODE_MDIO] = &swnodes[SWNODE_MDIO]; + return software_node_register_node_group(nodes->group); +} + +void tn40_swnodes_cleanup(struct tn40_priv *priv) +{ + /* cleanup of swnodes is only needed for AQR105-based cards */ + if (priv->pdev->device == PCI_DEVICE_ID_TEHUTI_TN9510) { + fwnode_handle_put(dev_fwnode(&priv->mdio->dev)); + device_remove_software_node(&priv->mdio->dev); + software_node_unregister_node_group(priv->nodes.group); + } +} + int tn40_mdiobus_init(struct tn40_priv *priv) { struct pci_dev *pdev = priv->pdev; @@ -129,14 +181,40 @@ int tn40_mdiobus_init(struct tn40_priv *priv)

bus->read_c45 = tn40_mdio_read_c45; bus->write_c45 = tn40_mdio_write_c45; + priv->mdio = bus; + + /* provide swnodes for AQR105-based cards only */ + if (pdev->device == PCI_DEVICE_ID_TEHUTI_TN9510) { + ret = tn40_swnodes_register(priv); + if (ret) { + pr_err("swnodes failed\n"); + return ret; + } + + ret = device_add_software_node(&bus->dev, + priv->nodes.group[SWNODE_MDIO]); + if (ret) { + dev_err(&pdev->dev, + "device_add_software_node failed: %d\n", ret); + goto err_swnodes_unregister; + } + }

ret = devm_mdiobus_register(&pdev->dev, bus); if (ret) { dev_err(&pdev->dev, "failed to register mdiobus %d %u %u\n", ret, bus->state, MDIOBUS_UNREGISTERED); - return ret; + goto err_swnodes_cleanup; } tn40_mdio_set_speed(priv, TN40_MDIO_SPEED_6MHZ); - priv->mdio = bus; return 0; + +err_swnodes_unregister: + software_node_unregister_node_group(priv->nodes.group); + return ret; +err_swnodes_cleanup: + tn40_swnodes_cleanup(priv); + return ret; } + +MODULE_FIRMWARE(AQR105_FIRMWARE);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alice Guo alice.guo@nxp.com

[ Upstream commit 229f3feb4b0442835b27d519679168bea2de96c2 ]

Enable power-down of TMU (Thermal Management Unit) for TMU version 2 during system suspend to save power. Save approximately 4.3mW on VDD_ANA_1P8 on i.MX93 platforms.

Signed-off-by: Alice Guo alice.guo@nxp.com Signed-off-by: Frank Li Frank.Li@nxp.com Link: https://lore.kernel.org/r/20241209164859.3758906-2-Frank.Li@nxp.com Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/qoriq_thermal.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c index 52e26be8c53df..aed2729f63d06 100644 --- a/drivers/thermal/qoriq_thermal.c +++ b/drivers/thermal/qoriq_thermal.c @@ -18,6 +18,7 @@ #define SITES_MAX 16 #define TMR_DISABLE 0x0 #define TMR_ME 0x80000000 +#define TMR_CMD BIT(29) #define TMR_ALPF 0x0c000000 #define TMR_ALPF_V2 0x03000000 #define TMTMIR_DEFAULT 0x0000000f @@ -356,6 +357,12 @@ static int qoriq_tmu_suspend(struct device *dev) if (ret) return ret;

+ if (data->ver > TMU_VER1) { + ret = regmap_set_bits(data->regmap, REGS_TMR, TMR_CMD); + if (ret) + return ret; + } + clk_disable_unprepare(data->clk);

return 0; @@ -370,6 +377,12 @@ static int qoriq_tmu_resume(struct device *dev) if (ret) return ret;

+ if (data->ver > TMU_VER1) { + ret = regmap_clear_bits(data->regmap, REGS_TMR, TMR_CMD); + if (ret) + return ret; + } + /* Enable monitoring */ return regmap_update_bits(data->regmap, REGS_TMR, TMR_ME, TMR_ME); }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pedro Nishiyama nishiyama.pedro@gmail.com

[ Upstream commit 14d17c78a4b1660c443bae9d38c814edea506f62 ]

A SCO connection without the proper voice_setting can cause the controller to lock up.

Signed-off-by: Pedro Nishiyama nishiyama.pedro@gmail.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/hci_event.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index bc5b42fce2b80..8894633403519 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -932,6 +932,9 @@ static u8 hci_cc_read_buffer_size(struct hci_dev *hdev, void *data, hdev->sco_pkts = 8; }

+ if (!read_voice_setting_capable(hdev)) + hdev->sco_pkts = 0; + hdev->acl_cnt = hdev->acl_pkts; hdev->sco_cnt = hdev->sco_pkts;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ryo Takakura ryotkkr98@gmail.com

[ Upstream commit 61c39d8c83e2077f33e0a2c8980a76a7f323f0ce ]

Since:

0c1d7a2c2d32 ("lockdep: Remove softirq accounting on PREEMPT_RT.")

the wait context test for mutex usage within "in softirq context" fails as it references @softirq_context:

| wait context tests | -------------------------------------------------------------------------- | rcu | raw | spin |mutex | -------------------------------------------------------------------------- in hardirq context: ok | ok | ok | ok | in hardirq context (not threaded): ok | ok | ok | ok | in softirq context: ok | ok | ok |FAILED|

As a fix, add lockdep map for BH disabled section. This fixes the issue by letting us catch cases when local_bh_disable() gets called with preemption disabled where local_lock doesn't get acquired. In the case of "in softirq context" selftest, local_bh_disable() was being called with preemption disable as it's early in the boot.

[ boqun: Move the lockdep annotations into __local_bh_*() to avoid false positives because of unpaired local_bh_disable() reported by Borislav Petkov and Peter Zijlstra, and make bh_lock_map only exist for PREEMPT_RT. ]

[ mingo: Restored authorship and improved the bh_lock_map definition. ]

Signed-off-by: Ryo Takakura ryotkkr98@gmail.com Signed-off-by: Boqun Feng boqun.feng@gmail.com Signed-off-by: Ingo Molnar mingo@kernel.org Link: https://lore.kernel.org/r/20250321143322.79651-1-boqun.feng@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/softirq.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)

diff --git a/kernel/softirq.c b/kernel/softirq.c index 8c4524ce65faf..00ff176350413 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -126,6 +126,18 @@ static DEFINE_PER_CPU(struct softirq_ctrl, softirq_ctrl) = { .lock = INIT_LOCAL_LOCK(softirq_ctrl.lock), };

+#ifdef CONFIG_DEBUG_LOCK_ALLOC +static struct lock_class_key bh_lock_key; +struct lockdep_map bh_lock_map = { + .name = "local_bh", + .key = &bh_lock_key, + .wait_type_outer = LD_WAIT_FREE, + .wait_type_inner = LD_WAIT_CONFIG, /* PREEMPT_RT makes BH preemptible. */ + .lock_type = LD_LOCK_PERCPU, +}; +EXPORT_SYMBOL_GPL(bh_lock_map); +#endif + /** * local_bh_blocked() - Check for idle whether BH processing is blocked * @@ -148,6 +160,8 @@ void __local_bh_disable_ip(unsigned long ip, unsigned int cnt)

WARN_ON_ONCE(in_hardirq());

+ lock_map_acquire_read(&bh_lock_map); + /* First entry of a task into a BH disabled section? */ if (!current->softirq_disable_cnt) { if (preemptible()) { @@ -211,6 +225,8 @@ void __local_bh_enable_ip(unsigned long ip, unsigned int cnt) WARN_ON_ONCE(in_hardirq()); lockdep_assert_irqs_enabled();

+ lock_map_release(&bh_lock_map); + local_irq_save(flags); curcnt = __this_cpu_read(softirq_ctrl.cnt);

@@ -261,6 +277,8 @@ static inline void ksoftirqd_run_begin(void) /* Counterpart to ksoftirqd_run_begin() */ static inline void ksoftirqd_run_end(void) { + /* pairs with the lock_map_acquire_read() in ksoftirqd_run_begin() */ + lock_map_release(&bh_lock_map); __local_bh_enable(SOFTIRQ_OFFSET, true); WARN_ON_ONCE(in_interrupt()); local_irq_enable();

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Frank Li Frank.Li@nxp.com

[ Upstream commit f3e1dccba0a0833fc9a05fb838ebeb6ea4ca0e1a ]

Most systems' PCIe outbound map windows have non-zero physical addresses, but the possibility of encountering zero increased after following commit ("PCI: dwc: Use parent_bus_offset").

'ep->outbound_addr[n]', representing 'parent_bus_address', might be 0 on some hardware, which trims high address bits through bus fabric before sending to the PCIe controller.

Replace the iteration logic with 'for_each_set_bit()' to ensure only allocated map windows are iterated when determining the ATU index from a given address.

Link: https://lore.kernel.org/r/20250315201548.858189-12-helgaas@kernel.org Signed-off-by: Frank Li Frank.Li@nxp.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/dwc/pcie-designware-ep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c index dea19250598a6..9e7e94f32b436 100644 --- a/drivers/pci/controller/dwc/pcie-designware-ep.c +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c @@ -280,7 +280,7 @@ static int dw_pcie_find_index(struct dw_pcie_ep *ep, phys_addr_t addr, u32 index; struct dw_pcie *pci = to_dw_pcie_from_ep(ep);

- for (index = 0; index < pci->num_ob_windows; index++) { + for_each_set_bit(index, ep->ob_window_map, pci->num_ob_windows) { if (ep->outbound_addr[index] != addr) continue; *atu_index = index;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ian Rogers irogers@google.com

[ Upstream commit 935e7cb5bb80106ff4f2fe39640f430134ef8cd8 ]

Separate test log files from object files. Depend on test log output but don't pass to the linker.

Reviewed-by: James Clark james.clark@linaro.org Signed-off-by: Ian Rogers irogers@google.com Link: https://lore.kernel.org/r/20250311213628.569562-2-irogers@google.com Signed-off-by: Namhyung Kim namhyung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/build/Makefile.build | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/tools/build/Makefile.build b/tools/build/Makefile.build index 5fb3fb3d97e0f..ffe988867703b 100644 --- a/tools/build/Makefile.build +++ b/tools/build/Makefile.build @@ -149,6 +149,10 @@ objprefix := $(subst ./,,$(OUTPUT)$(dir)/) obj-y := $(addprefix $(objprefix),$(obj-y)) subdir-obj-y := $(addprefix $(objprefix),$(subdir-obj-y))

+# Separate out test log files from real build objects. +test-y := $(filter %_log, $(obj-y)) +obj-y := $(filter-out %_log, $(obj-y)) + # Final '$(obj)-in.o' object in-target := $(objprefix)$(obj)-in.o

@@ -159,7 +163,7 @@ $(subdir-y):

$(sort $(subdir-obj-y)): $(subdir-y) ;

-$(in-target): $(obj-y) FORCE +$(in-target): $(obj-y) $(test-y) FORCE $(call rule_mkdir) $(call if_changed,$(host)ld_multi)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Flora Cui flora.cui@amd.com

[ Upstream commit 017fbb6690c2245b1b4ef39b66c79d2990fe63dd ]

Signed-off-by: Flora Cui flora.cui@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c | 31 ++++++++++--------- 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c index ca8091fd3a24f..018240a2ab96a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c @@ -111,8 +111,7 @@ #include "amdgpu_isp.h" #endif

-#define FIRMWARE_IP_DISCOVERY "amdgpu/ip_discovery.bin" -MODULE_FIRMWARE(FIRMWARE_IP_DISCOVERY); +MODULE_FIRMWARE("amdgpu/ip_discovery.bin");

#define mmIP_DISCOVERY_VERSION 0x16A00 #define mmRCC_CONFIG_MEMSIZE 0xde3 @@ -295,21 +294,13 @@ static int amdgpu_discovery_read_binary_from_mem(struct amdgpu_device *adev, return ret; }

-static int amdgpu_discovery_read_binary_from_file(struct amdgpu_device *adev, uint8_t *binary) +static int amdgpu_discovery_read_binary_from_file(struct amdgpu_device *adev, + uint8_t *binary, + const char *fw_name) { const struct firmware *fw; - const char *fw_name; int r;

- switch (amdgpu_discovery) { - case 2: - fw_name = FIRMWARE_IP_DISCOVERY; - break; - default: - dev_warn(adev->dev, "amdgpu_discovery is not set properly\n"); - return -EINVAL; - } - r = request_firmware(&fw, fw_name, adev->dev); if (r) { dev_err(adev->dev, "can't load firmware "%s"\n", @@ -402,10 +393,19 @@ static int amdgpu_discovery_verify_npsinfo(struct amdgpu_device *adev, return 0; }

+static const char *amdgpu_discovery_get_fw_name(struct amdgpu_device *adev) +{ + if (amdgpu_discovery == 2) + return "amdgpu/ip_discovery.bin"; + + return NULL; +} + static int amdgpu_discovery_init(struct amdgpu_device *adev) { struct table_info *info; struct binary_header *bhdr; + const char *fw_name; uint16_t offset; uint16_t size; uint16_t checksum; @@ -417,9 +417,10 @@ static int amdgpu_discovery_init(struct amdgpu_device *adev) return -ENOMEM;

/* Read from file if it is the preferred option */ - if (amdgpu_discovery == 2) { + fw_name = amdgpu_discovery_get_fw_name(adev); + if (fw_name != NULL) { dev_info(adev->dev, "use ip discovery information from file"); - r = amdgpu_discovery_read_binary_from_file(adev, adev->mman.discovery_bin); + r = amdgpu_discovery_read_binary_from_file(adev, adev->mman.discovery_bin, fw_name);

if (r) { dev_err(adev->dev, "failed to read ip discovery binary from file\n");

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Roger Pau Monne roger.pau@citrix.com

[ Upstream commit 6c4d5aadf5df31ea0ac025980670eee9beaf466b ]

MSI remapping bypass (directly configuring MSI entries for devices on the VMD bus) won't work under Xen, as Xen is not aware of devices in such bus, and hence cannot configure the entries using the pIRQ interface in the PV case, and in the PVH case traps won't be setup for MSI entries for such devices.

Until Xen is aware of devices in the VMD bus prevent the VMD_FEAT_CAN_BYPASS_MSI_REMAP capability from being used when running as any kind of Xen guest.

The MSI remapping bypass is an optional feature of VMD bridges, and hence when running under Xen it will be masked and devices will be forced to redirect its interrupts from the VMD bridge. That mode of operation must always be supported by VMD bridges and works when Xen is not aware of devices behind the VMD bridge.

Signed-off-by: Roger Pau Monné roger.pau@citrix.com Acked-by: Bjorn Helgaas bhelgaas@google.com Message-ID: 20250219092059.90850-3-roger.pau@citrix.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/vmd.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)

diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index 94ceec50a2b94..8df064b62a2ff 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -17,6 +17,8 @@ #include <linux/rculist.h> #include <linux/rcupdate.h>

+#include <xen/xen.h> + #include <asm/irqdomain.h>

#define VMD_CFGBAR 0 @@ -970,6 +972,24 @@ static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id) struct vmd_dev *vmd; int err;

+ if (xen_domain()) { + /* + * Xen doesn't have knowledge about devices in the VMD bus + * because the config space of devices behind the VMD bridge is + * not known to Xen, and hence Xen cannot discover or configure + * them in any way. + * + * Bypass of MSI remapping won't work in that case as direct + * write by Linux to the MSI entries won't result in functional + * interrupts, as Xen is the entity that manages the host + * interrupt controller and must configure interrupts. However + * multiplexing of interrupts by the VMD bridge will work under + * Xen, so force the usage of that mode which must always be + * supported by VMD bridges. + */ + features &= ~VMD_FEAT_CAN_BYPASS_MSI_REMAP; + } + if (resource_size(&dev->resource[VMD_CFGBAR]) < (1 << 20)) return -ENOMEM;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicolas Bretz bretznic@gmail.com

[ Upstream commit d7b0befd09320e3356a75cb96541c030515e7f5f ]

A user complained that a message such as:

EXT4-fs (nvme0n1p3): re-mounted UUID ro. Quota mode: none.

implied that the file system was previously mounted read/write and was now remounted read-only, when it could have been some other mount state that had changed by the "mount -o remount" operation. Fix this by only logging "ro"or "r/w" when it has changed.

https://bugzilla.kernel.org/show_bug.cgi?id=219132

Signed-off-by: Nicolas Bretz bretznic@gmail.com Link: https://patch.msgid.link/20250319171011.8372-1-bretznic@gmail.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/super.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 4291ab3c20be6..473909c4a3784 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -6744,6 +6744,7 @@ static int ext4_reconfigure(struct fs_context *fc) { struct super_block *sb = fc->root->d_sb; int ret; + bool old_ro = sb_rdonly(sb);

fc->s_fs_info = EXT4_SB(sb);

@@ -6755,9 +6756,9 @@ static int ext4_reconfigure(struct fs_context *fc) if (ret < 0) return ret;

- ext4_msg(sb, KERN_INFO, "re-mounted %pU %s. Quota mode: %s.", - &sb->s_uuid, sb_rdonly(sb) ? "ro" : "r/w", - ext4_quota_mode(sb)); + ext4_msg(sb, KERN_INFO, "re-mounted %pU%s.", + &sb->s_uuid, + (old_ro != sb_rdonly(sb)) ? (sb_rdonly(sb) ? " ro" : " r/w") : "");

return 0; }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christian Brauner brauner@kernel.org

[ Upstream commit 0fb482728ba1ee2130eaa461bf551f014447997c ]

This is another attempt trying to make pidfd polling for multi-threaded exec and premature thread-group leader exit consistent.

A quick recap of these two cases:

(1) During a multi-threaded exec by a subthread, i.e., non-thread-group leader thread, all other threads in the thread-group including the thread-group leader are killed and the struct pid of the thread-group leader will be taken over by the subthread that called exec. IOW, two tasks change their TIDs.

(2) A premature thread-group leader exit means that the thread-group leader exited before all of the other subthreads in the thread-group have exited.

Both cases lead to inconsistencies for pidfd polling with PIDFD_THREAD. Any caller that holds a PIDFD_THREAD pidfd to the current thread-group leader may or may not see an exit notification on the file descriptor depending on when poll is performed. If the poll is performed before the exec of the subthread has concluded an exit notification is generated for the old thread-group leader. If the poll is performed after the exec of the subthread has concluded no exit notification is generated for the old thread-group leader.

The correct behavior would be to simply not generate an exit notification on the struct pid of a subhthread exec because the struct pid is taken over by the subthread and thus remains alive.

But this is difficult to handle because a thread-group may exit prematurely as mentioned in (2). In that case an exit notification is reliably generated but the subthreads may continue to run for an indeterminate amount of time and thus also may exec at some point.

So far there was no way to distinguish between (1) and (2) internally. This tiny series tries to address this problem by discarding PIDFD_THREAD notification on premature thread-group leader exit.

If that works correctly then no exit notifications are generated for a PIDFD_THREAD pidfd for a thread-group leader until all subthreads have been reaped. If a subthread should exec aftewards no exit notification will be generated until that task exits or it creates subthreads and repeates the cycle.

Co-Developed-by: Oleg Nesterov oleg@redhat.com Signed-off-by: Oleg Nesterov oleg@redhat.com Link: https://lore.kernel.org/r/20250320-work-pidfs-thread_group-v4-1-da678ce805bf... Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/pidfs.c | 9 +++++---- kernel/exit.c | 6 +++--- kernel/signal.c | 3 +-- 3 files changed, 9 insertions(+), 9 deletions(-)

--- a/fs/pidfs.c +++ b/fs/pidfs.c @@ -95,20 +95,21 @@ static void pidfd_show_fdinfo(struct seq static __poll_t pidfd_poll(struct file *file, struct poll_table_struct *pts) { struct pid *pid = pidfd_pid(file); - bool thread = file->f_flags & PIDFD_THREAD; struct task_struct *task; __poll_t poll_flags = 0;

poll_wait(file, &pid->wait_pidfd, pts); /* - * Depending on PIDFD_THREAD, inform pollers when the thread - * or the whole thread-group exits. + * Don't wake waiters if the thread-group leader exited + * prematurely. They either get notified when the last subthread + * exits or not at all if one of the remaining subthreads execs + * and assumes the struct pid of the old thread-group leader. */ guard(rcu)(); task = pid_task(pid, PIDTYPE_PID); if (!task) poll_flags = EPOLLIN | EPOLLRDNORM | EPOLLHUP; - else if (task->exit_state && (thread || thread_group_empty(task))) + else if (task->exit_state && !delay_group_leader(task)) poll_flags = EPOLLIN | EPOLLRDNORM;

return poll_flags; --- a/kernel/exit.c +++ b/kernel/exit.c @@ -742,10 +742,10 @@ static void exit_notify(struct task_stru

tsk->exit_state = EXIT_ZOMBIE; /* - * sub-thread or delay_group_leader(), wake up the - * PIDFD_THREAD waiters. + * Ignore thread-group leaders that exited before all + * subthreads did. */ - if (!thread_group_empty(tsk)) + if (!delay_group_leader(tsk)) do_notify_pidfd(tsk);

if (unlikely(tsk->ptrace)) { --- a/kernel/signal.c +++ b/kernel/signal.c @@ -2063,8 +2063,7 @@ bool do_notify_parent(struct task_struct WARN_ON_ONCE(!tsk->ptrace && (tsk->group_leader != tsk || !thread_group_empty(tsk))); /* - * tsk is a group leader and has no threads, wake up the - * non-PIDFD_THREAD waiters. + * Notify for thread-group leaders without subthreads. */ if (thread_group_empty(tsk)) do_notify_pidfd(tsk);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Erick Shepherd erick.shepherd@ni.com

[ Upstream commit 31e75ed964582257f59156ce6a42860e1ae4cc39 ]

The SD spec version 6.0 section 6.4.1.5 requires that Vdd must be lowered to less than 0.5V for a minimum of 1 ms when powering off a card. Increase wait to 15 ms so that voltage has time to drain down to 0.5V and cards can power off correctly. Issues with voltage drain time were only observed on Apollo Lake and Bay Trail host controllers so this fix is limited to those devices.

Signed-off-by: Erick Shepherd erick.shepherd@ni.com Acked-by: Adrian Hunter adrian.hunter@intel.com Link: https://lore.kernel.org/r/20250314195021.1588090-1-erick.shepherd@ni.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/sdhci-pci-core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 2e2e15e2d8fb8..b0b1d403f3527 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -609,8 +609,12 @@ static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,

sdhci_set_power(host, mode, vdd);

- if (mode == MMC_POWER_OFF) + if (mode == MMC_POWER_OFF) { + if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_APL_SD || + slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BYT_SD) + usleep_range(15000, 17500); return; + }

/* * Bus power might not enable after D3 -> D0 transition due to the

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet edumazet@google.com

[ Upstream commit 0efc297a3c4974dbd609ee36fc6345720b6ca735 ]

cgroup_rstat_flush_locked() grabs the irq safe cgroup_rstat_lock while iterating all possible cpus. It only drops the lock if there is scheduler or spin lock contention. If neither, then interrupts can be disabled for a long time. On large machines this can disable interrupts for a long enough time to drop network packets. On 400+ CPU machines I've seen interrupt disabled for over 40 msec.

Prevent rstat from disabling interrupts while processing all possible cpus. Instead drop and reacquire cgroup_rstat_lock for each cpu. This approach was previously discussed in https://lore.kernel.org/lkml/ZBz%2FV5a7%2F6PZeM7S@slm.duckdns.org/, though this was in the context of an non-irq rstat spin lock.

Benchmark this change with: 1) a single stat_reader process with 400 threads, each reading a test memcg's memory.stat repeatedly for 10 seconds. 2) 400 memory hog processes running in the test memcg and repeatedly charging memory until oom killed. Then they repeat charging and oom killing.

v6.14-rc6 with CONFIG_IRQSOFF_TRACER with stat_reader and hogs, finds interrupts are disabled by rstat for 45341 usec: # => started at: _raw_spin_lock_irq # => ended at: cgroup_rstat_flush # # # _------=> CPU# # / _-----=> irqs-off/BH-disabled # | / _----=> need-resched # || / _---=> hardirq/softirq # ||| / _--=> preempt-depth # |||| / _-=> migrate-disable # ||||| / delay # cmd pid |||||| time | caller # \ / |||||| \ | / stat_rea-96532 52d.... 0us*: _raw_spin_lock_irq stat_rea-96532 52d.... 45342us : cgroup_rstat_flush stat_rea-96532 52d.... 45342us : tracer_hardirqs_on <-cgroup_rstat_flush stat_rea-96532 52d.... 45343us : <stack trace> => memcg1_stat_format => memory_stat_format => memory_stat_show => seq_read_iter => vfs_read => ksys_read => do_syscall_64 => entry_SYSCALL_64_after_hwframe

With this patch the CONFIG_IRQSOFF_TRACER doesn't find rstat to be the longest holder. The longest irqs-off holder has irqs disabled for 4142 usec, a huge reduction from previous 45341 usec rstat finding.

Running stat_reader memory.stat reader for 10 seconds: - without memory hogs: 9.84M accesses => 12.7M accesses - with memory hogs: 9.46M accesses => 11.1M accesses The throughput of memory.stat access improves.

The mode of memory.stat access latency after grouping by of 2 buckets: - without memory hogs: 64 usec => 16 usec - with memory hogs: 64 usec => 8 usec The memory.stat latency improves.

Signed-off-by: Eric Dumazet edumazet@google.com Signed-off-by: Greg Thelen gthelen@google.com Tested-by: Greg Thelen gthelen@google.com Acked-by: Michal Koutný mkoutny@suse.com Reviewed-by: Yosry Ahmed yosry.ahmed@linux.dev Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/cgroup/rstat.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/kernel/cgroup/rstat.c b/kernel/cgroup/rstat.c index 3e01781aeb7bd..c4ce2f5a9745f 100644 --- a/kernel/cgroup/rstat.c +++ b/kernel/cgroup/rstat.c @@ -323,13 +323,11 @@ static void cgroup_rstat_flush_locked(struct cgroup *cgrp) rcu_read_unlock(); }

- /* play nice and yield if necessary */ - if (need_resched() || spin_needbreak(&cgroup_rstat_lock)) { - __cgroup_rstat_unlock(cgrp, cpu); - if (!cond_resched()) - cpu_relax(); - __cgroup_rstat_lock(cgrp, cpu); - } + /* play nice and avoid disabling interrupts for a long time */ + __cgroup_rstat_unlock(cgrp, cpu); + if (!cond_resched()) + cpu_relax(); + __cgroup_rstat_lock(cgrp, cpu); } }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rex Lu rex.lu@mediatek.com

[ Upstream commit 8d38abdf6c182225c5c0a81451fa51b7b36a635d ]

The firmware needs a specific trigger when WED is being reset due to an ethernet reset condition. This helps prevent further L1 SER failure.

Signed-off-by: Rex Lu rex.lu@mediatek.com Link: https://patch.msgid.link/20250311103646.43346-2-nbd@nbd.name Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7996/mcu.h | 3 ++- drivers/net/wireless/mediatek/mt76/mt7996/mmio.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h index 43468bcaffc6d..a75e1c9435bb0 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h +++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h @@ -908,7 +908,8 @@ enum { UNI_CMD_SER_SET_RECOVER_L3_TX_DISABLE, UNI_CMD_SER_SET_RECOVER_L3_BF, UNI_CMD_SER_SET_RECOVER_L4_MDP, - UNI_CMD_SER_SET_RECOVER_FULL, + UNI_CMD_SER_SET_RECOVER_FROM_ETH, + UNI_CMD_SER_SET_RECOVER_FULL = 8, UNI_CMD_SER_SET_SYSTEM_ASSERT, /* action */ UNI_CMD_SER_ENABLE = 1, diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c b/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c index 442f72450352b..b6209ed1cfe01 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c +++ b/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c @@ -281,7 +281,7 @@ static int mt7996_mmio_wed_reset(struct mtk_wed_device *wed) if (test_and_set_bit(MT76_STATE_WED_RESET, &mphy->state)) return -EBUSY;

- ret = mt7996_mcu_set_ser(dev, UNI_CMD_SER_TRIGGER, UNI_CMD_SER_SET_RECOVER_L1, + ret = mt7996_mcu_set_ser(dev, UNI_CMD_SER_TRIGGER, UNI_CMD_SER_SET_RECOVER_FROM_ETH, mphy->band_idx); if (ret) goto out;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ming Yen Hsieh mingyen.hsieh@mediatek.com

[ Upstream commit f2027ef3f733d3f0bb7f27fa3343784058f946ab ]

Read the EEPROM to determine the hardware type and uses this to load the correct CLC data.

Signed-off-by: Ming Yen Hsieh mingyen.hsieh@mediatek.com Link: https://patch.msgid.link/20250304113649.867387-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/wireless/mediatek/mt76/mt7925/mcu.c | 61 ++++++++++++++++++- .../wireless/mediatek/mt76/mt7925/mt7925.h | 3 + 2 files changed, 63 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c index 8476f9caa98db..5b14bf434df36 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c @@ -616,6 +616,54 @@ int mt7925_mcu_uni_rx_ba(struct mt792x_dev *dev, return ret; }

+static int mt7925_mcu_read_eeprom(struct mt792x_dev *dev, u32 offset, u8 *val) +{ + struct { + u8 rsv[4]; + + __le16 tag; + __le16 len; + + __le32 addr; + __le32 valid; + u8 data[MT7925_EEPROM_BLOCK_SIZE]; + } __packed req = { + .tag = cpu_to_le16(1), + .len = cpu_to_le16(sizeof(req) - 4), + .addr = cpu_to_le32(round_down(offset, + MT7925_EEPROM_BLOCK_SIZE)), + }; + struct evt { + u8 rsv[4]; + + __le16 tag; + __le16 len; + + __le32 ver; + __le32 addr; + __le32 valid; + __le32 size; + __le32 magic_num; + __le32 type; + __le32 rsv1[4]; + u8 data[32]; + } __packed *res; + struct sk_buff *skb; + int ret; + + ret = mt76_mcu_send_and_get_msg(&dev->mt76, MCU_WM_UNI_CMD_QUERY(EFUSE_CTRL), + &req, sizeof(req), true, &skb); + if (ret) + return ret; + + res = (struct evt *)skb->data; + *val = res->data[offset % MT7925_EEPROM_BLOCK_SIZE]; + + dev_kfree_skb(skb); + + return 0; +} + static int mt7925_load_clc(struct mt792x_dev *dev, const char *fw_name) { const struct mt76_connac2_fw_trailer *hdr; @@ -624,13 +672,20 @@ static int mt7925_load_clc(struct mt792x_dev *dev, const char *fw_name) struct mt76_dev *mdev = &dev->mt76; struct mt792x_phy *phy = &dev->phy; const struct firmware *fw; + u8 *clc_base = NULL, hw_encap = 0; int ret, i, len, offset = 0; - u8 *clc_base = NULL;

if (mt7925_disable_clc || mt76_is_usb(&dev->mt76)) return 0;

+ if (mt76_is_mmio(&dev->mt76)) { + ret = mt7925_mcu_read_eeprom(dev, MT_EE_HW_TYPE, &hw_encap); + if (ret) + return ret; + hw_encap = u8_get_bits(hw_encap, MT_EE_HW_TYPE_ENCAP); + } + ret = request_firmware(&fw, fw_name, mdev->dev); if (ret) return ret; @@ -675,6 +730,10 @@ static int mt7925_load_clc(struct mt792x_dev *dev, const char *fw_name) if (phy->clc[clc->idx]) continue;

+ /* header content sanity */ + if (u8_get_bits(clc->type, MT_EE_HW_TYPE_ENCAP) != hw_encap) + continue; + phy->clc[clc->idx] = devm_kmemdup(mdev->dev, clc, le32_to_cpu(clc->len), GFP_KERNEL); diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h b/drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h index df3c705d1cb3f..4ad779329b8f0 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h +++ b/drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h @@ -147,9 +147,12 @@ enum mt7925_eeprom_field { MT_EE_CHIP_ID = 0x000, MT_EE_VERSION = 0x002, MT_EE_MAC_ADDR = 0x004, + MT_EE_HW_TYPE = 0xa71, __MT_EE_MAX = 0x9ff };

+#define MT_EE_HW_TYPE_ENCAP GENMASK(1, 0) + enum { TXPWR_USER, TXPWR_EEPROM,

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Huth thuth@redhat.com

[ Upstream commit 8a141be3233af7d4f7014ebc44d5452d46b2b1be ]

__ASSEMBLY__ is only defined by the Makefile of the kernel, so this is not really useful for UAPI headers (unless the userspace Makefile defines it, too). Let's switch to __ASSEMBLER__ which gets set automatically by the compiler when compiling assembly code.

Signed-off-by: Thomas Huth thuth@redhat.com Signed-off-by: Ingo Molnar mingo@kernel.org Cc: "H. Peter Anvin" hpa@zytor.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Kees Cook keescook@chromium.org Cc: Brian Gerst brgerst@gmail.com Link: https://lore.kernel.org/r/20250310104256.123527-1-thuth@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/uapi/asm/bootparam.h | 4 ++-- arch/x86/include/uapi/asm/e820.h | 4 ++-- arch/x86/include/uapi/asm/ldt.h | 4 ++-- arch/x86/include/uapi/asm/msr.h | 4 ++-- arch/x86/include/uapi/asm/ptrace-abi.h | 6 +++--- arch/x86/include/uapi/asm/ptrace.h | 4 ++-- arch/x86/include/uapi/asm/setup_data.h | 4 ++-- arch/x86/include/uapi/asm/signal.h | 8 ++++---- 8 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h index 9b82eebd7add5..dafbf581c515d 100644 --- a/arch/x86/include/uapi/asm/bootparam.h +++ b/arch/x86/include/uapi/asm/bootparam.h @@ -26,7 +26,7 @@ #define XLF_5LEVEL_ENABLED (1<<6) #define XLF_MEM_ENCRYPTION (1<<7)

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__

#include <linux/types.h> #include <linux/screen_info.h> @@ -210,6 +210,6 @@ enum x86_hardware_subarch { X86_NR_SUBARCHS, };

-#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */

#endif /* _ASM_X86_BOOTPARAM_H */ diff --git a/arch/x86/include/uapi/asm/e820.h b/arch/x86/include/uapi/asm/e820.h index 2f491efe3a126..55bc668671560 100644 --- a/arch/x86/include/uapi/asm/e820.h +++ b/arch/x86/include/uapi/asm/e820.h @@ -54,7 +54,7 @@ */ #define E820_RESERVED_KERN 128

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ #include <linux/types.h> struct e820entry { __u64 addr; /* start of memory segment */ @@ -76,7 +76,7 @@ struct e820map { #define BIOS_ROM_BASE 0xffe00000 #define BIOS_ROM_END 0xffffffff

-#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */

#endif /* _UAPI_ASM_X86_E820_H */ diff --git a/arch/x86/include/uapi/asm/ldt.h b/arch/x86/include/uapi/asm/ldt.h index d62ac5db093b4..a82c039d8e6a7 100644 --- a/arch/x86/include/uapi/asm/ldt.h +++ b/arch/x86/include/uapi/asm/ldt.h @@ -12,7 +12,7 @@ /* The size of each LDT entry. */ #define LDT_ENTRY_SIZE 8

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ /* * Note on 64bit base and limit is ignored and you cannot set DS/ES/CS * not to the default values if you still want to do syscalls. This @@ -44,5 +44,5 @@ struct user_desc { #define MODIFY_LDT_CONTENTS_STACK 1 #define MODIFY_LDT_CONTENTS_CODE 2

-#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_LDT_H */ diff --git a/arch/x86/include/uapi/asm/msr.h b/arch/x86/include/uapi/asm/msr.h index e7516b402a00f..4b8917ca28fe7 100644 --- a/arch/x86/include/uapi/asm/msr.h +++ b/arch/x86/include/uapi/asm/msr.h @@ -2,7 +2,7 @@ #ifndef _UAPI_ASM_X86_MSR_H #define _UAPI_ASM_X86_MSR_H

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__

#include <linux/types.h> #include <linux/ioctl.h> @@ -10,5 +10,5 @@ #define X86_IOC_RDMSR_REGS _IOWR('c', 0xA0, __u32[8]) #define X86_IOC_WRMSR_REGS _IOWR('c', 0xA1, __u32[8])

-#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _UAPI_ASM_X86_MSR_H */ diff --git a/arch/x86/include/uapi/asm/ptrace-abi.h b/arch/x86/include/uapi/asm/ptrace-abi.h index 16074b9c93bb5..5823584dea132 100644 --- a/arch/x86/include/uapi/asm/ptrace-abi.h +++ b/arch/x86/include/uapi/asm/ptrace-abi.h @@ -25,7 +25,7 @@

#else /* __i386__ */

-#if defined(__ASSEMBLY__) || defined(__FRAME_OFFSETS) +#if defined(__ASSEMBLER__) || defined(__FRAME_OFFSETS) /* * C ABI says these regs are callee-preserved. They aren't saved on kernel entry * unless syscall needs a complete, fully filled "struct pt_regs". @@ -57,7 +57,7 @@ #define EFLAGS 144 #define RSP 152 #define SS 160 -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */

/* top of stack page */ #define FRAME_SIZE 168 @@ -87,7 +87,7 @@

#define PTRACE_SINGLEBLOCK 33 /* resume execution until next branch */

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ #include <linux/types.h> #endif

diff --git a/arch/x86/include/uapi/asm/ptrace.h b/arch/x86/include/uapi/asm/ptrace.h index 85165c0edafc8..e0b5b4f6226b1 100644 --- a/arch/x86/include/uapi/asm/ptrace.h +++ b/arch/x86/include/uapi/asm/ptrace.h @@ -7,7 +7,7 @@ #include <asm/processor-flags.h>

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__

#ifdef __i386__ /* this struct defines the way the registers are stored on the @@ -81,6 +81,6 @@ struct pt_regs {

-#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */

#endif /* _UAPI_ASM_X86_PTRACE_H */ diff --git a/arch/x86/include/uapi/asm/setup_data.h b/arch/x86/include/uapi/asm/setup_data.h index b111b0c185449..50c45ead4e7c9 100644 --- a/arch/x86/include/uapi/asm/setup_data.h +++ b/arch/x86/include/uapi/asm/setup_data.h @@ -18,7 +18,7 @@ #define SETUP_INDIRECT (1<<31) #define SETUP_TYPE_MAX (SETUP_ENUM_MAX | SETUP_INDIRECT)

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__

#include <linux/types.h>

@@ -78,6 +78,6 @@ struct ima_setup_data { __u64 size; } __attribute__((packed));

-#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */

#endif /* _UAPI_ASM_X86_SETUP_DATA_H */ diff --git a/arch/x86/include/uapi/asm/signal.h b/arch/x86/include/uapi/asm/signal.h index f777346450ec3..1067efabf18b5 100644 --- a/arch/x86/include/uapi/asm/signal.h +++ b/arch/x86/include/uapi/asm/signal.h @@ -2,7 +2,7 @@ #ifndef _UAPI_ASM_X86_SIGNAL_H #define _UAPI_ASM_X86_SIGNAL_H

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ #include <linux/types.h> #include <linux/compiler.h>

@@ -16,7 +16,7 @@ struct siginfo; typedef unsigned long sigset_t;

#endif /* __KERNEL__ */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */

#define SIGHUP 1 @@ -68,7 +68,7 @@ typedef unsigned long sigset_t;

#include <asm-generic/signal-defs.h>

-#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__

# ifndef __KERNEL__ @@ -106,6 +106,6 @@ typedef struct sigaltstack { __kernel_size_t ss_size; } stack_t;

-#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */

#endif /* _UAPI_ASM_X86_SIGNAL_H */

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sohil Mehta sohil.mehta@intel.com

[ Upstream commit 7a2ad752746bfb13e89a83984ecc52a48bae4969 ]

Some old crusty CPUs need an extra delay that slows down booting. See the comment above 'init_udelay' for details. Newer CPUs don't need the delay.

Right now, for Intel, Family 6 and only Family 6 skips the delay. That leaves out both the Family 15 (Pentium 4s) and brand new Family 18/19 models.

The omission of Family 15 (Pentium 4s) seems like an oversight and 18/19 do not need the delay.

Skip the delay on all Intel processors Family 6 and beyond.

Signed-off-by: Sohil Mehta sohil.mehta@intel.com Signed-off-by: Ingo Molnar mingo@kernel.org Link: https://lore.kernel.org/r/20250219184133.816753-11-sohil.mehta@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/smpboot.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index f1fac08fdef28..2c451de702c87 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -681,9 +681,9 @@ static void __init smp_quirk_init_udelay(void) return;

/* if modern processor, use no delay */ - if (((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 6)) || - ((boot_cpu_data.x86_vendor == X86_VENDOR_HYGON) && (boot_cpu_data.x86 >= 0x18)) || - ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && (boot_cpu_data.x86 >= 0xF))) { + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && boot_cpu_data.x86_vfm >= INTEL_PENTIUM_PRO) || + (boot_cpu_data.x86_vendor == X86_VENDOR_HYGON && boot_cpu_data.x86 >= 0x18) || + (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && boot_cpu_data.x86 >= 0xF)) { init_udelay = 0; return; }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Philip Redkin me@rarity.fan

[ Upstream commit 631ca8909fd5c62b9fda9edda93924311a78a9c4 ]

At least with CONFIG_PHYSICAL_START=0x100000, if there is < 4 MiB of contiguous free memory available at this point, the kernel will crash and burn because memblock_phys_alloc_range() returns 0 on failure, which leads memblock_phys_free() to throw the first 4 MiB of physical memory to the wolves.

At a minimum it should fail gracefully with a meaningful diagnostic, but in fact everything seems to work fine without the weird reserve allocation.

Signed-off-by: Philip Redkin me@rarity.fan Signed-off-by: Ingo Molnar mingo@kernel.org Cc: Dave Hansen dave.hansen@linux.intel.com Cc: Rik van Riel riel@surriel.com Cc: "H. Peter Anvin" hpa@zytor.com Link: https://lore.kernel.org/r/94b3e98f-96a7-3560-1f76-349eb95ccf7f@rarity.fan Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/mm/init.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 101725c149c42..9cbc1e6057d3c 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -645,8 +645,13 @@ static void __init memory_map_top_down(unsigned long map_start, */ addr = memblock_phys_alloc_range(PMD_SIZE, PMD_SIZE, map_start, map_end); - memblock_phys_free(addr, PMD_SIZE); - real_end = addr + PMD_SIZE; + if (!addr) { + pr_warn("Failed to release memory for alloc_low_pages()"); + real_end = max(map_start, ALIGN_DOWN(map_end, PMD_SIZE)); + } else { + memblock_phys_free(addr, PMD_SIZE); + real_end = addr + PMD_SIZE; + }

/* step_size need to be small so pgt_buf from BRK could cover it */ step_size = PMD_SIZE;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Boris Burkov boris@bur.io

[ Upstream commit 895c6721d310c036dcfebb5ab845822229fa35eb ]

Currently, the async discard machinery owns a ref to the block_group when the block_group is queued on a discard list. However, to handle races with discard cancellation and the discard workfn, we have a specific logic to detect that the block_group is *currently* running in the workfn, to protect the workfn's usage amidst cancellation.

As far as I can tell, this doesn't have any overt bugs (though finish_discard_pass() and remove_from_discard_list() racing can have a surprising outcome for the caller of remove_from_discard_list() in that it is again added at the end).

But it is needlessly complicated to rely on locking and the nullity of discard_ctl->block_group. Simplify this significantly by just taking a refcount while we are in the workfn and unconditionally drop it in both the remove and workfn paths, regardless of if they race.

Reviewed-by: Filipe Manana fdmanana@suse.com Signed-off-by: Boris Burkov boris@bur.io Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/discard.c | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-)

diff --git a/fs/btrfs/discard.c b/fs/btrfs/discard.c index e9cdc1759dada..de23c4b3515e5 100644 --- a/fs/btrfs/discard.c +++ b/fs/btrfs/discard.c @@ -168,13 +168,7 @@ static bool remove_from_discard_list(struct btrfs_discard_ctl *discard_ctl, block_group->discard_eligible_time = 0; queued = !list_empty(&block_group->discard_list); list_del_init(&block_group->discard_list); - /* - * If the block group is currently running in the discard workfn, we - * don't want to deref it, since it's still being used by the workfn. - * The workfn will notice this case and deref the block group when it is - * finished. - */ - if (queued && !running) + if (queued) btrfs_put_block_group(block_group);

spin_unlock(&discard_ctl->lock); @@ -273,9 +267,10 @@ static struct btrfs_block_group *peek_discard_list( block_group->discard_cursor = block_group->start; block_group->discard_state = BTRFS_DISCARD_EXTENTS; } - discard_ctl->block_group = block_group; } if (block_group) { + btrfs_get_block_group(block_group); + discard_ctl->block_group = block_group; *discard_state = block_group->discard_state; *discard_index = block_group->discard_index; } @@ -506,9 +501,20 @@ static void btrfs_discard_workfn(struct work_struct *work)

block_group = peek_discard_list(discard_ctl, &discard_state, &discard_index, now); - if (!block_group || !btrfs_run_discard_work(discard_ctl)) + if (!block_group) return; + if (!btrfs_run_discard_work(discard_ctl)) { + spin_lock(&discard_ctl->lock); + btrfs_put_block_group(block_group); + discard_ctl->block_group = NULL; + spin_unlock(&discard_ctl->lock); + return; + } if (now < block_group->discard_eligible_time) { + spin_lock(&discard_ctl->lock); + btrfs_put_block_group(block_group); + discard_ctl->block_group = NULL; + spin_unlock(&discard_ctl->lock); btrfs_discard_schedule_work(discard_ctl, false); return; } @@ -560,15 +566,7 @@ static void btrfs_discard_workfn(struct work_struct *work) spin_lock(&discard_ctl->lock); discard_ctl->prev_discard = trimmed; discard_ctl->prev_discard_time = now; - /* - * If the block group was removed from the discard list while it was - * running in this workfn, then we didn't deref it, since this function - * still owned that reference. But we set the discard_ctl->block_group - * back to NULL, so we can use that condition to know that now we need - * to deref the block_group. - */ - if (discard_ctl->block_group == NULL) - btrfs_put_block_group(block_group); + btrfs_put_block_group(block_group); discard_ctl->block_group = NULL; __btrfs_discard_schedule_work(discard_ctl, now, false); spin_unlock(&discard_ctl->lock);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Qu Wenruo wqu@suse.com

[ Upstream commit df94a342efb451deb0e32b495d1d6cd4bb3a1648 ]

[BUG] Even after all the error fixes related the "ASSERT(list_empty(&fs_info->delayed_iputs));" in close_ctree(), I can still hit it reliably with my experimental 2K block size.

[CAUSE] In my case, all the error is triggered after the fs is already in error status.

I find the following call trace to be the cause of race:

Main thread | endio_write_workers ---------------------------------------------+--------------------------- close_ctree() | |- btrfs_error_commit_super() | | |- btrfs_cleanup_transaction() | | | |- btrfs_destroy_all_ordered_extents() | | | |- btrfs_wait_ordered_roots() | | |- btrfs_run_delayed_iputs() | | | btrfs_finish_ordered_io() | | |- btrfs_put_ordered_extent() | | |- btrfs_add_delayed_iput() |- ASSERT(list_empty(delayed_iputs)) | !!! Triggered !!!

The root cause is that, btrfs_wait_ordered_roots() only wait for ordered extents to finish their IOs, not to wait for them to finish and removed.

[FIX] Since btrfs_error_commit_super() will flush and wait for all ordered extents, it should be executed early, before we start flushing the workqueues.

And since btrfs_error_commit_super() now runs early, there is no need to run btrfs_run_delayed_iputs() inside it, so just remove the btrfs_run_delayed_iputs() call from btrfs_error_commit_super().

Reviewed-by: Filipe Manana fdmanana@suse.com Signed-off-by: Qu Wenruo wqu@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/disk-io.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 19e5f8eaae772..e0e740e4d7c75 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -4254,6 +4254,14 @@ void __cold close_ctree(struct btrfs_fs_info *fs_info) /* clear out the rbtree of defraggable inodes */ btrfs_cleanup_defrag_inodes(fs_info);

+ /* + * Handle the error fs first, as it will flush and wait for all ordered + * extents. This will generate delayed iputs, thus we want to handle + * it first. + */ + if (unlikely(BTRFS_FS_ERROR(fs_info))) + btrfs_error_commit_super(fs_info); + /* * Wait for any fixup workers to complete. * If we don't wait for them here and they are still running by the time @@ -4343,9 +4351,6 @@ void __cold close_ctree(struct btrfs_fs_info *fs_info) btrfs_err(fs_info, "commit super ret %d", ret); }

- if (BTRFS_FS_ERROR(fs_info)) - btrfs_error_commit_super(fs_info); - kthread_stop(fs_info->transaction_kthread); kthread_stop(fs_info->cleaner_kthread);

@@ -4468,10 +4473,6 @@ static void btrfs_error_commit_super(struct btrfs_fs_info *fs_info) /* cleanup FS via transaction */ btrfs_cleanup_transaction(fs_info);

- mutex_lock(&fs_info->cleaner_mutex); - btrfs_run_delayed_iputs(fs_info); - mutex_unlock(&fs_info->cleaner_mutex); - down_write(&fs_info->cleanup_work_sem); up_write(&fs_info->cleanup_work_sem); }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Filipe Manana fdmanana@suse.com

[ Upstream commit 1283b8c125a83bf7a7dbe90c33d3472b6d7bf612 ]

At btrfs_reclaim_bgs_work(), we are grabbing a block group's zone unusable bytes while not under the protection of the block group's spinlock, so this can trigger race reports from KCSAN (or similar tools) since that field is typically updated while holding the lock, such as at __btrfs_add_free_space_zoned() for example.

Fix this by grabbing the zone unusable bytes while we are still in the critical section holding the block group's spinlock, which is right above where we are currently grabbing it.

Reviewed-by: Johannes Thumshirn johannes.thumshirn@wdc.com Signed-off-by: Filipe Manana fdmanana@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/block-group.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/fs/btrfs/block-group.c b/fs/btrfs/block-group.c index 4423d8b716a58..aa8656c8b7e7e 100644 --- a/fs/btrfs/block-group.c +++ b/fs/btrfs/block-group.c @@ -1891,6 +1891,17 @@ void btrfs_reclaim_bgs_work(struct work_struct *work) up_write(&space_info->groups_sem); goto next; } + + /* + * Cache the zone_unusable value before turning the block group + * to read only. As soon as the block group is read only it's + * zone_unusable value gets moved to the block group's read-only + * bytes and isn't available for calculations anymore. We also + * cache it before unlocking the block group, to prevent races + * (reports from KCSAN and such tools) with tasks updating it. + */ + zone_unusable = bg->zone_unusable; + spin_unlock(&bg->lock); spin_unlock(&space_info->lock);

@@ -1907,13 +1918,6 @@ void btrfs_reclaim_bgs_work(struct work_struct *work) goto next; }

- /* - * Cache the zone_unusable value before turning the block group - * to read only. As soon as the blog group is read only it's - * zone_unusable value gets moved to the block group's read-only - * bytes and isn't available for calculations anymore. - */ - zone_unusable = bg->zone_unusable; ret = inc_block_group_ro(bg, 0); up_write(&space_info->groups_sem); if (ret < 0)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chen Linxuan chenlinxuan@uniontech.com

[ Upstream commit e1a0202c6bfda24002a3ae2115154fa90104c649 ]

This patch improve the returned error code of blkcg_policy_register().

1. Move the validation check for cpd/pd_alloc_fn and cpd/pd_free_fn function pairs to the start of blkcg_policy_register(). This ensures we immediately return -EINVAL if the function pairs are not correctly provided, rather than returning -ENOSPC after locking and unlocking mutexes unnecessarily.

Those locks should not contention any problems, as error of policy registration is a super cold path.

2. Return -ENOMEM when cpd_alloc_fn() failed.

Co-authored-by: Wen Tao wentao@uniontech.com Signed-off-by: Wen Tao wentao@uniontech.com Signed-off-by: Chen Linxuan chenlinxuan@uniontech.com Reviewed-by: Michal Koutný mkoutny@suse.com Acked-by: Tejun Heo tj@kernel.org Reviewed-by: Yu Kuai yukuai3@huawei.com Link: https://lore.kernel.org/r/3E333A73B6B6DFC0+20250317022924.150907-1-chenlinxu... Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-cgroup.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index f1cf7f2909f3a..643d6bf66522e 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -1725,27 +1725,27 @@ int blkcg_policy_register(struct blkcg_policy *pol) struct blkcg *blkcg; int i, ret;

+ /* + * Make sure cpd/pd_alloc_fn and cpd/pd_free_fn in pairs, and policy + * without pd_alloc_fn/pd_free_fn can't be activated. + */ + if ((!pol->cpd_alloc_fn ^ !pol->cpd_free_fn) || + (!pol->pd_alloc_fn ^ !pol->pd_free_fn)) + return -EINVAL; + mutex_lock(&blkcg_pol_register_mutex); mutex_lock(&blkcg_pol_mutex);

/* find an empty slot */ - ret = -ENOSPC; for (i = 0; i < BLKCG_MAX_POLS; i++) if (!blkcg_policy[i]) break; if (i >= BLKCG_MAX_POLS) { pr_warn("blkcg_policy_register: BLKCG_MAX_POLS too small\n"); + ret = -ENOSPC; goto err_unlock; }

- /* - * Make sure cpd/pd_alloc_fn and cpd/pd_free_fn in pairs, and policy - * without pd_alloc_fn/pd_free_fn can't be activated. - */ - if ((!pol->cpd_alloc_fn ^ !pol->cpd_free_fn) || - (!pol->pd_alloc_fn ^ !pol->pd_free_fn)) - goto err_unlock; - /* register @pol */ pol->plid = i; blkcg_policy[pol->plid] = pol; @@ -1756,8 +1756,10 @@ int blkcg_policy_register(struct blkcg_policy *pol) struct blkcg_policy_data *cpd;

cpd = pol->cpd_alloc_fn(GFP_KERNEL); - if (!cpd) + if (!cpd) { + ret = -ENOMEM; goto err_free_cpds; + }

blkcg->cpd[pol->plid] = cpd; cpd->blkcg = blkcg;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jing Zhou Jing.Zhou@amd.com

[ Upstream commit 9c2f4ae64bb6f6d83a54d88b9ee0f369cdbb9fa8 ]

[WHY] We should never apply a minimum dispclk value while in prepare_bandwidth or while displays are active. This is always an optimizaiton for when all displays are disabled.

[HOW] Defer dispclk optimization until safe_to_lower = true and display_count reaches 0.

Since 0 has a special value in this logic (ie. no dispclk required) we also need adjust the logic that clamps it for the actual request to PMFW.

Reviewed-by: Charlene Liu charlene.liu@amd.com Reviewed-by: Chris Park chris.park@amd.com Reviewed-by: Eric Yang eric.yang@amd.com Signed-off-by: Jing Zhou Jing.Zhou@amd.com Signed-off-by: Nicholas Kazlauskas nicholas.kazlauskas@amd.com Signed-off-by: Alex Hung alex.hung@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../dc/clk_mgr/dcn315/dcn315_clk_mgr.c | 20 +++++++++++-------- .../dc/clk_mgr/dcn316/dcn316_clk_mgr.c | 13 +++++++++--- 2 files changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c index a0fb4481d2f1b..827b24b3442ad 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c @@ -130,7 +130,7 @@ static void dcn315_update_clocks(struct clk_mgr *clk_mgr_base, struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base); struct dc_clocks *new_clocks = &context->bw_ctx.bw.dcn.clk; struct dc *dc = clk_mgr_base->ctx->dc; - int display_count; + int display_count = 0; bool update_dppclk = false; bool update_dispclk = false; bool dpp_clock_lowered = false; @@ -204,15 +204,19 @@ static void dcn315_update_clocks(struct clk_mgr *clk_mgr_base, update_dppclk = true; }

- if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz)) { - /* No need to apply the w/a if we haven't taken over from bios yet */ - if (clk_mgr_base->clks.dispclk_khz) - dcn315_disable_otg_wa(clk_mgr_base, context, true); + if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) && + (new_clocks->dispclk_khz > 0 || (safe_to_lower && display_count == 0))) { + int requested_dispclk_khz = new_clocks->dispclk_khz;

+ dcn315_disable_otg_wa(clk_mgr_base, context, true); + + /* Clamp the requested clock to PMFW based on their limit. */ + if (dc->debug.min_disp_clk_khz > 0 && requested_dispclk_khz < dc->debug.min_disp_clk_khz) + requested_dispclk_khz = dc->debug.min_disp_clk_khz; + + dcn315_smu_set_dispclk(clk_mgr, requested_dispclk_khz); clk_mgr_base->clks.dispclk_khz = new_clocks->dispclk_khz; - dcn315_smu_set_dispclk(clk_mgr, clk_mgr_base->clks.dispclk_khz); - if (clk_mgr_base->clks.dispclk_khz) - dcn315_disable_otg_wa(clk_mgr_base, context, false); + dcn315_disable_otg_wa(clk_mgr_base, context, false);

update_dispclk = true; } diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c index c3e50c3aaa609..37c39756fece4 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c @@ -140,7 +140,7 @@ static void dcn316_update_clocks(struct clk_mgr *clk_mgr_base, struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base); struct dc_clocks *new_clocks = &context->bw_ctx.bw.dcn.clk; struct dc *dc = clk_mgr_base->ctx->dc; - int display_count; + int display_count = 0; bool update_dppclk = false; bool update_dispclk = false; bool dpp_clock_lowered = false; @@ -211,11 +211,18 @@ static void dcn316_update_clocks(struct clk_mgr *clk_mgr_base, update_dppclk = true; }

- if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz)) { + if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) && + (new_clocks->dispclk_khz > 0 || (safe_to_lower && display_count == 0))) { + int requested_dispclk_khz = new_clocks->dispclk_khz; + dcn316_disable_otg_wa(clk_mgr_base, context, safe_to_lower, true);

+ /* Clamp the requested clock to PMFW based on their limit. */ + if (dc->debug.min_disp_clk_khz > 0 && requested_dispclk_khz < dc->debug.min_disp_clk_khz) + requested_dispclk_khz = dc->debug.min_disp_clk_khz; + + dcn316_smu_set_dispclk(clk_mgr, requested_dispclk_khz); clk_mgr_base->clks.dispclk_khz = new_clocks->dispclk_khz; - dcn316_smu_set_dispclk(clk_mgr, clk_mgr_base->clks.dispclk_khz); dcn316_disable_otg_wa(clk_mgr_base, context, safe_to_lower, false);

update_dispclk = true;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stanley Chu yschu@nuvoton.com

[ Upstream commit 0430bf9bc1ac068c8b8c540eb93e5751872efc51 ]

The controller driver nacked the master request but didn't emit a STOP to end the transaction. The driver shall refuse the unsupported requests and return the controller state to IDLE by emitting a STOP.

Signed-off-by: Stanley Chu yschu@nuvoton.com Reviewed-by: Frank Li Frank.Li@nxp.com Link: https://lore.kernel.org/r/20250318053606.3087121-4-yschu@nuvoton.com Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i3c/master/svc-i3c-master.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c index 7911814ad82ac..6ffe022dbb5b4 100644 --- a/drivers/i3c/master/svc-i3c-master.c +++ b/drivers/i3c/master/svc-i3c-master.c @@ -511,6 +511,7 @@ static void svc_i3c_master_ibi_work(struct work_struct *work) queue_work(master->base.wq, &master->hj_work); break; case SVC_I3C_MSTATUS_IBITYPE_MASTER_REQUEST: + svc_i3c_master_emit_stop(master); default: break; }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Heming Zhao heming.zhao@suse.com

[ Upstream commit 03d2b62208a336a3bb984b9465ef6d89a046ea22 ]

This patch bypasses multi-link errors in TCP mode, allowing dlm to operate on the first tcp link.

Signed-off-by: Heming Zhao heming.zhao@suse.com Signed-off-by: David Teigland teigland@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/dlm/lowcomms.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c index f2d88a3581695..10461451185e8 100644 --- a/fs/dlm/lowcomms.c +++ b/fs/dlm/lowcomms.c @@ -1826,8 +1826,8 @@ static int dlm_tcp_listen_validate(void) { /* We don't support multi-homed hosts */ if (dlm_local_count > 1) { - log_print("TCP protocol can't handle multi-homed hosts, try SCTP"); - return -EINVAL; + log_print("Detect multi-homed hosts but use only the first IP address."); + log_print("Try SCTP, if you want to enable multi-link."); }

return 0;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Benjamin Berg benjamin@sipsolutions.net

[ Upstream commit cef721e0d53d2b64f2ba177c63a0dfdd7c0daf17 ]

Doing this allows using registers as retrieved from an mcontext to be pushed to a process using PTRACE_SETREGS.

It is not entirely clear to me why CSGSFS was masked. Doing so creates issues when using the mcontext as process state in seccomp and simply copying the register appears to work perfectly fine for ptrace.

Signed-off-by: Benjamin Berg benjamin@sipsolutions.net Link: https://patch.msgid.link/20250224181827.647129-2-benjamin@sipsolutions.net Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/um/os-Linux/mcontext.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/x86/um/os-Linux/mcontext.c b/arch/x86/um/os-Linux/mcontext.c index e80ab7d281177..1b0d95328b2c7 100644 --- a/arch/x86/um/os-Linux/mcontext.c +++ b/arch/x86/um/os-Linux/mcontext.c @@ -27,7 +27,6 @@ void get_regs_from_mc(struct uml_pt_regs *regs, mcontext_t *mc) COPY(RIP); COPY2(EFLAGS, EFL); COPY2(CS, CSGSFS); - regs->gp[CS / sizeof(unsigned long)] &= 0xffff; - regs->gp[CS / sizeof(unsigned long)] |= 3; + regs->gp[SS / sizeof(unsigned long)] = mc->gregs[REG_CSGSFS] >> 48; #endif }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeff Chen jeff.chen_1@nxp.com

[ Upstream commit 4fcfcbe457349267fe048524078e8970807c1a5b ]

This patch addresses an issue where, despite the AP supporting 40MHz bandwidth, the connection was limited to 20MHz. Without this fix, even if the access point supports 40MHz, the bandwidth after connection remains at 20MHz. This issue is not a regression.

Signed-off-by: Jeff Chen jeff.chen_1@nxp.com Reviewed-by: Francesco Dolcini francesco.dolcini@toradex.com Link: https://patch.msgid.link/20250314094238.2097341-1-jeff.chen_1@nxp.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/marvell/mwifiex/11n.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/11n.c b/drivers/net/wireless/marvell/mwifiex/11n.c index 66f0f5377ac18..738bafc3749b0 100644 --- a/drivers/net/wireless/marvell/mwifiex/11n.c +++ b/drivers/net/wireless/marvell/mwifiex/11n.c @@ -403,12 +403,14 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,

if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 && bss_desc->bcn_ht_oper->ht_param & - IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) + IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) { + chan_list->chan_scan_param[0].radio_type |= + CHAN_BW_40MHZ << 2; SET_SECONDARYCHAN(chan_list->chan_scan_param[0]. radio_type, (bss_desc->bcn_ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET)); - + } *buffer += struct_size(chan_list, chan_scan_param, 1); ret_len += struct_size(chan_list, chan_scan_param, 1); }