This is the start of the stable review cycle for the 4.9.274 release.
There are 71 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed 30 Jun 2021 02:39:51 PM UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/…
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
Thanks,
Sasha
-------------
Pseudo-Shortlog of commits:
Alexander Duyck (1):
i40e: Be much more verbose about what we can and cannot offload
Anirudh Rayabharam (1):
HID: usbhid: fix info leak in hid_submit_ctrl
Antti Järvinen (1):
PCI: Mark TI C667X to avoid bus reset
Arnd Bergmann (1):
ARM: 9081/1: fix gcc-10 thumb2-kernel regression
Bixuan Cui (1):
HID: gt683r: add missing MODULE_DEVICE_TABLE
Bumyong Lee (1):
dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclc
Chen Li (1):
radeon: use memcpy_to/fromio for UVD fw upload
Chengyang Fan (1):
net: ipv4: fix memory leak in ip_mc_add1_src
Christophe JAILLET (4):
alx: Fix an error handling path in 'alx_probe()'
qlcnic: Fix an error handling path in 'qlcnic_probe()'
netxen_nic: Fix an error handling path in 'netxen_nic_probe()'
be2net: Fix an error handling path in 'be_probe()'
Dan Robertson (1):
net: ieee802154: fix null deref in parse dev addr
Dongliang Mu (1):
net: usb: fix possible use-after-free in smsc75xx_bind
Du Cheng (1):
cfg80211: call cfg80211_leave_ocb when switching away from OCB
Eric Dumazet (5):
net/af_unix: fix a data-race in unix_dgram_sendmsg / unix_release_sock
inet: use bigger hash table for IP ID generation
inet: annotate date races around sk->sk_txhash
net/packet: annotate accesses to po->bind
net/packet: annotate accesses to po->ifindex
Esben Haabendal (1):
net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY
Fugang Duan (1):
net: fec_ptp: add clock rate zero check
Hillf Danton (1):
gfs2: Fix use-after-free in gfs2_glock_shrink_scan
Ido Schimmel (1):
rtnetlink: Fix regression in bridge VLAN configuration
Jiapeng Chong (2):
ethernet: myri10ge: Fix missing error code in myri10ge_probe()
rtnetlink: Fix missing error code in rtnl_bridge_notify()
Jisheng Zhang (1):
net: stmmac: dwmac1000: Fix extended MAC address registers definition
Johan Hovold (1):
i2c: robotfuzz-osif: fix control-request directions
Johannes Berg (2):
mac80211: remove warning in ieee80211_get_sband()
mac80211: drop multicast fragments
Josh Triplett (1):
net: ipconfig: Don't override command-line hostnames or domains
Kees Cook (4):
r8152: Avoid memcpy() over-reading of ETH_SS_STATS
sh_eth: Avoid memcpy() over-reading of ETH_SS_STATS
r8169: Avoid memcpy() over-reading of ETH_SS_STATS
net: qed: Fix memcpy() overflow of qed_dcbx_params()
Linyu Yuan (1):
net: cdc_eem: fix tx fixup skb leak
Maciej Żenczykowski (1):
net: cdc_ncm: switch to eth%d interface naming
Mark Bolhuis (1):
HID: Add BUS_VIRTUAL to hid_connect logging
Maurizio Lombardi (1):
scsi: target: core: Fix warning on realtime kernels
Maxim Mikityanskiy (1):
netfilter: synproxy: Fix out of bounds when parsing TCP options
Ming Lei (1):
scsi: core: Put .shost_dev in failure path if host state changes to
RUNNING
Nanyong Sun (1):
net: ipv4: fix memory leak in netlbl_cipsov4_add_std
Naoya Horiguchi (1):
mm: hwpoison: change PageHWPoison behavior on hugetlb pages
Nathan Chancellor (1):
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
Norbert Slusarek (1):
can: bcm: fix infoleak in struct bcm_msg_head
Paolo Abeni (1):
udp: fix race between close() and udp_abort()
Pavel Skripkin (5):
net: rds: fix memory leak in rds_recvmsg
net: hamradio: fix memory leak in mkiss_close
net: ethernet: fix potential use-after-free in ec_bhf_remove
net: caif: fix memory leak in ldisc_open
nilfs2: fix memory leak in nilfs_sysfs_delete_device_group
Peter Chen (1):
usb: dwc3: core: fix kernel panic when do reboot
Rafael J. Wysocki (1):
Revert "PCI: PM: Do not read power state in pci_enable_device_flags()"
Randy Dunlap (1):
dmaengine: QCOM_HIDMA_MGMT depends on HAS_IOMEM
Sasha Levin (1):
Linux 4.9.274-rc1
Shanker Donthineni (1):
PCI: Mark some NVIDIA GPUs to avoid bus reset
Srinivas Pandruvada (1):
HID: hid-sensor-hub: Return error for hid_set_field() failure
Steven Rostedt (VMware) (3):
tracing: Do no increment trace_clock_global() by one
tracing: Do not stop recording cmdlines when tracing is off
tracing: Do not stop recording comms if the trace file is being read
Suzuki K Poulose (1):
arm64: perf: Disable PMU while processing counter overflows
Sven Eckelmann (1):
batman-adv: Avoid WARN_ON timing related checks
Tetsuo Handa (1):
can: bcm/raw/isotp: use per module netdevice notifier
Thomas Gleixner (1):
x86/fpu: Reset state for all signal restore failures
Vineet Gupta (1):
ARCv2: save ABI registers across signal handling
Yang Yingliang (1):
dmaengine: stedma40: add missing iounmap() on error in d40_probe()
Yongqiang Liu (1):
ARM: OMAP2+: Fix build warning when mmc_omap is not built
Zheng Yongjun (4):
net/x25: Return the correct errno code
net: Return the correct errno code
fib: Return the correct errno code
ping: Check return value of function 'ping_queue_rcv_skb'
Makefile | 7 +-
arch/arc/include/uapi/asm/sigcontext.h | 1 +
arch/arc/kernel/signal.c | 43 +++++++++
arch/arm/kernel/setup.c | 16 ++--
arch/arm/mach-omap2/board-n8x0.c | 2 +-
arch/arm64/kernel/perf_event.c | 50 ++++++-----
arch/x86/kernel/fpu/signal.c | 18 ++--
drivers/dma/pl330.c | 6 +-
drivers/dma/qcom/Kconfig | 1 +
drivers/dma/ste_dma40.c | 3 +
drivers/gpu/drm/radeon/radeon_uvd.c | 4 +-
drivers/hid/hid-core.c | 3 +
drivers/hid/hid-gt683r.c | 1 +
drivers/hid/hid-sensor-hub.c | 13 ++-
drivers/hid/usbhid/hid-core.c | 2 +-
drivers/i2c/busses/i2c-robotfuzz-osif.c | 4 +-
drivers/net/caif/caif_serial.c | 1 +
drivers/net/ethernet/atheros/alx/main.c | 1 +
drivers/net/ethernet/ec_bhf.c | 4 +-
drivers/net/ethernet/emulex/benet/be_main.c | 1 +
drivers/net/ethernet/freescale/fec_ptp.c | 4 +
drivers/net/ethernet/intel/i40e/i40e_main.c | 52 +++++++++--
.../net/ethernet/myricom/myri10ge/myri10ge.c | 1 +
.../ethernet/qlogic/netxen/netxen_nic_main.c | 2 +
drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 4 +-
.../net/ethernet/qlogic/qlcnic/qlcnic_main.c | 1 +
drivers/net/ethernet/realtek/r8169.c | 2 +-
drivers/net/ethernet/renesas/sh_eth.c | 2 +-
.../net/ethernet/stmicro/stmmac/dwmac1000.h | 8 +-
drivers/net/ethernet/xilinx/ll_temac_main.c | 5 ++
drivers/net/hamradio/mkiss.c | 1 +
drivers/net/usb/cdc_eem.c | 2 +-
drivers/net/usb/cdc_ncm.c | 2 +-
drivers/net/usb/r8152.c | 2 +-
drivers/net/usb/smsc75xx.c | 10 ++-
drivers/pci/pci.c | 16 +++-
drivers/pci/quirks.c | 22 +++++
drivers/scsi/hosts.c | 8 +-
drivers/target/target_core_transport.c | 4 +-
drivers/usb/dwc3/core.c | 2 +-
fs/gfs2/glock.c | 2 +-
fs/nilfs2/sysfs.c | 1 +
include/linux/hid.h | 3 +-
include/linux/swapops.h | 9 --
include/net/sock.h | 10 ++-
kernel/trace/trace.c | 12 ---
kernel/trace/trace_clock.c | 6 +-
mm/memory-failure.c | 87 +++++--------------
net/batman-adv/bat_iv_ogm.c | 4 +-
net/can/bcm.c | 64 +++++++++++---
net/can/raw.c | 62 ++++++++++---
net/compat.c | 2 +-
net/core/fib_rules.c | 2 +-
net/core/rtnetlink.c | 4 +
net/ieee802154/nl802154.c | 9 +-
net/ipv4/cipso_ipv4.c | 1 +
net/ipv4/igmp.c | 1 +
net/ipv4/ipconfig.c | 13 +--
net/ipv4/ping.c | 12 +--
net/ipv4/route.c | 42 ++++++---
net/ipv4/udp.c | 10 +++
net/ipv6/udp.c | 3 +
net/mac80211/ieee80211_i.h | 2 +-
net/mac80211/rx.c | 9 +-
net/netfilter/nf_synproxy_core.c | 5 ++
net/packet/af_packet.c | 32 +++----
net/rds/recv.c | 2 +-
net/unix/af_unix.c | 7 +-
net/wireless/util.c | 3 +
net/x25/af_x25.c | 2 +-
70 files changed, 493 insertions(+), 259 deletions(-)
--
2.30.2
This is the start of the stable review cycle for the 5.4.129 release.
There are 71 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed 30 Jun 2021 02:29:43 PM UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/…
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
Thanks,
Sasha
-------------
Pseudo-Shortlog of commits:
Alex Shi (1):
mm: add VM_WARN_ON_ONCE_PAGE() macro
Arnd Bergmann (1):
ARM: 9081/1: fix gcc-10 thumb2-kernel regression
Austin Kim (1):
net: ethtool: clear heap allocations for ethtool function
Christian König (2):
drm/nouveau: wait for moving fence after pinning v2
drm/radeon: wait for moving fence after pinning
Du Cheng (1):
cfg80211: call cfg80211_leave_ocb when switching away from OCB
Eric Dumazet (3):
inet: annotate date races around sk->sk_txhash
net/packet: annotate accesses to po->bind
net/packet: annotate accesses to po->ifindex
Eric Snowberg (2):
certs: Add EFI_CERT_X509_GUID support for dbx entries
certs: Move load_system_certificate_list to a common function
Esben Haabendal (2):
net: ll_temac: Add memory-barriers for TX BD access
net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY
Fabien Dessenne (1):
pinctrl: stm32: fix the reported number of GPIO lines per bank
Fuad Tabba (1):
KVM: selftests: Fix kvm_check_cap() assertion
Guillaume Ranquet (3):
dmaengine: mediatek: free the proper desc in desc_free handler
dmaengine: mediatek: do not issue a new desc if one is still current
dmaengine: mediatek: use GFP_NOWAIT instead of GFP_ATOMIC in prep_dma
Haibo Chen (1):
spi: spi-nxp-fspi: move the register operation after the clock enable
Hugh Dickins (16):
mm/thp: fix __split_huge_pmd_locked() on shmem migration entry
mm/thp: make is_huge_zero_pmd() safe and quicker
mm/thp: try_to_unmap() use TTU_SYNC for safe splitting
mm/thp: fix vma_address() if virtual address below file offset
mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page()
mm: page_vma_mapped_walk(): use page for pvmw->page
mm: page_vma_mapped_walk(): settle PageHuge on entry
mm: page_vma_mapped_walk(): use pmde for *pvmw->pmd
mm: page_vma_mapped_walk(): prettify PVMW_MIGRATION block
mm: page_vma_mapped_walk(): crossing page table boundary
mm: page_vma_mapped_walk(): add a level of indentation
mm: page_vma_mapped_walk(): use goto instead of while (1)
mm: page_vma_mapped_walk(): get vma_address_end() earlier
mm/thp: fix page_vma_mapped_walk() if THP mapped by ptes
mm/thp: another PVMW_SYNC fix in page_vma_mapped_walk()
mm, futex: fix shared futex pgoff on shmem huge page
Johan Hovold (1):
i2c: robotfuzz-osif: fix control-request directions
Johannes Berg (3):
mac80211: remove warning in ieee80211_get_sband()
mac80211_hwsim: drop pending frames on stop
mac80211: drop multicast fragments
Jue Wang (1):
mm/thp: fix page_address_in_vma() on file THP tails
Kees Cook (4):
r8152: Avoid memcpy() over-reading of ETH_SS_STATS
sh_eth: Avoid memcpy() over-reading of ETH_SS_STATS
r8169: Avoid memcpy() over-reading of ETH_SS_STATS
net: qed: Fix memcpy() overflow of qed_dcbx_params()
Miaohe Lin (2):
mm/rmap: remove unneeded semicolon in page_not_mapped()
mm/rmap: use page_not_mapped in try_to_unmap()
Mikel Rychliski (1):
PCI: Add AMD RS690 quirk to enable 64-bit DMA
Mimi Zohar (1):
module: limit enabling module.sig_enforce
Nathan Chancellor (1):
MIPS: generic: Update node names to avoid unit addresses
Nayna Jain (2):
certs: Add wrapper function to check blacklisted binary hash
x86/efi: move common keyring handler functions to new file
Neil Armstrong (1):
mmc: meson-gx: use memcpy_to/fromio for dram-access-quirk
Nicholas Piggin (1):
KVM: do not allow mapping valid but non-reference-counted pages
Nick Desaulniers (1):
arm64: link with -z norelro for LLD or aarch64-elf
Pavel Skripkin (2):
net: caif: fix memory leak in ldisc_open
nilfs2: fix memory leak in nilfs_sysfs_delete_device_group
Peter Zijlstra (1):
recordmcount: Correct st_shndx handling
Petr Mladek (2):
kthread_worker: split code for canceling the delayed work timer
kthread: prevent deadlock when kthread_mod_delayed_work() races with
kthread_cancel_delayed_work_sync()
Praneeth Bajjuri (1):
net: phy: dp83867: perform soft reset and retain established link
Rafael J. Wysocki (1):
Revert "PCI: PM: Do not read power state in pci_enable_device_flags()"
Sami Tolvanen (1):
kbuild: add CONFIG_LD_IS_LLD
Sasha Levin (1):
Linux 5.4.129-rc1
Xu Yu (1):
mm, thp: use head page in __migration_entry_wait()
Yang Shi (1):
mm: thp: replace DEBUG_VM BUG with VM_WARN when unmap fails for split
Yifan Zhang (2):
Revert "drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue."
Revert "drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover
full doorbell."
Yu Kuai (1):
dmaengine: zynqmp_dma: Fix PM reference leak in
zynqmp_dma_alloc_chan_resourc()
Zheng Yongjun (2):
net: ipv4: Remove unneed BUG() function
ping: Check return value of function 'ping_queue_rcv_skb'
Zou Wei (1):
dmaengine: rcar-dmac: Fix PM reference leak in rcar_dmac_probe()
Makefile | 4 +-
arch/arm/kernel/setup.c | 16 +-
arch/arm64/Makefile | 10 +-
arch/mips/generic/board-boston.its.S | 10 +-
arch/mips/generic/board-ni169445.its.S | 10 +-
arch/mips/generic/board-ocelot.its.S | 20 +--
arch/mips/generic/board-xilfpga.its.S | 10 +-
arch/mips/generic/vmlinux.its.S | 10 +-
arch/x86/pci/fixup.c | 44 +++++
certs/Kconfig | 9 +
certs/Makefile | 2 +-
certs/blacklist.c | 52 ++++++
certs/blacklist.h | 2 +
certs/common.c | 57 +++++++
certs/common.h | 9 +
certs/system_keyring.c | 55 +-----
drivers/dma/mediatek/mtk-uart-apdma.c | 27 +--
drivers/dma/sh/rcar-dmac.c | 2 +-
drivers/dma/xilinx/zynqmp_dma.c | 2 +-
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 6 +-
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 6 +-
drivers/gpu/drm/nouveau/nouveau_prime.c | 17 +-
drivers/gpu/drm/radeon/radeon_prime.c | 16 +-
drivers/i2c/busses/i2c-robotfuzz-osif.c | 4 +-
drivers/mmc/host/meson-gx-mmc.c | 50 +++++-
drivers/net/caif/caif_serial.c | 1 +
drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 4 +-
drivers/net/ethernet/realtek/r8169_main.c | 2 +-
drivers/net/ethernet/renesas/sh_eth.c | 2 +-
drivers/net/ethernet/xilinx/ll_temac_main.c | 19 ++-
drivers/net/phy/dp83867.c | 6 +-
drivers/net/usb/r8152.c | 2 +-
drivers/net/wireless/mac80211_hwsim.c | 5 +
drivers/pci/pci.c | 16 +-
drivers/pinctrl/stm32/pinctrl-stm32.c | 9 +-
drivers/spi/spi-nxp-fspi.c | 11 +-
fs/nilfs2/sysfs.c | 1 +
include/keys/system_keyring.h | 21 +++
include/linux/huge_mm.h | 8 +-
include/linux/hugetlb.h | 16 --
include/linux/mm.h | 3 +
include/linux/mmdebug.h | 13 ++
include/linux/pagemap.h | 13 +-
include/linux/rmap.h | 3 +-
include/net/sock.h | 10 +-
init/Kconfig | 3 +
kernel/futex.c | 2 +-
kernel/kthread.c | 77 ++++++---
kernel/module.c | 14 +-
mm/huge_memory.c | 56 +++---
mm/hugetlb.c | 5 +-
mm/internal.h | 53 ++++--
mm/memory.c | 41 +++++
mm/migrate.c | 1 +
mm/page_vma_mapped.c | 160 +++++++++++-------
mm/pgtable-generic.c | 4 +-
mm/rmap.c | 50 +++---
mm/truncate.c | 43 +++--
net/core/ethtool.c | 10 +-
net/ipv4/devinet.c | 2 +-
net/ipv4/ping.c | 12 +-
net/ipv6/addrconf.c | 2 +-
net/mac80211/ieee80211_i.h | 2 +-
net/mac80211/rx.c | 9 +-
net/packet/af_packet.c | 32 ++--
net/wireless/util.c | 3 +
scripts/recordmcount.h | 15 +-
security/integrity/Makefile | 3 +-
.../platform_certs/keyring_handler.c | 91 ++++++++++
.../platform_certs/keyring_handler.h | 32 ++++
security/integrity/platform_certs/load_uefi.c | 67 +-------
tools/testing/selftests/kvm/lib/kvm_util.c | 2 +-
virt/kvm/kvm_main.c | 19 ++-
73 files changed, 959 insertions(+), 466 deletions(-)
create mode 100644 certs/common.c
create mode 100644 certs/common.h
create mode 100644 security/integrity/platform_certs/keyring_handler.c
create mode 100644 security/integrity/platform_certs/keyring_handler.h
--
2.30.2
Hi
Have you received the information about the our drone that sent you
earlier?
Our drone is ready in our warehouse. Not sure if you like it or not.
Today I will send you the specific information again about this
product.
Drone details here:
Frequency 2.4G
Brushless Motor Type 1806
Capacity of smart lithium battery 11.1V 1800mAh
Charging time About 250 minutes
Charging type usb
Remote control battery Battery of transmitter AA 3 -4.5V alkaline
battery (sold separately)
AA 3-4.5V battery (Not included)
Product size (LxWxH) 17x11.5x6.7CM (fold folded)
26x26x6.7cm (unfold unfolded/between motors)
Product's Weight 480g
Box size 32x21.5x8.8cm
Gross/net weight G.W./N.W. 10.5/9.6 kgs
Flight time About 28 min
About 2000 M
Headless mode yes
Smart Return (3 modes)
Surround flght yes
Smart follow Follow me yes
Our drone prices:
For one drone: 285.90 each
For 2-20 drones: 275.90 each
For 21-100 drones: 265.90 each
u s d
Do you want to order it today? If you order, just tell us the quantity
and the shipping address, and I will arrange the logistics to deliver
the goods to you.
Waypoint (track) flight Waypoin flight yes
Satellite positioning/Optical flow positioning gps mode/ Optical flow
mode yes
Camera lens 110\u00b0
The camera adjusts the angle up and down
Adjusting angle of the electric camera
Image return distance (no interference, no occlusion)
Wifi image transmission distance
The maximum is about 400-500 meters
Video resolution of main camera 2048x1080
Photo resolution of main camera 4096x3072
Frame rate of main camera 25 fps
Video resolution of bottom camera 1280x720
Photo resolution of bottom camera 1280x720
Packing List:
rc Drone x 1
Remote Controller x 1
1 or 2 or 3 Battery (It depends on your selection)
Manual x 1
USB Charging Cable x 1
Features:
-Level-7 wind resistance
-Two-axis stabilization mechanical Pan-Tilt with a pitch angle of 110
degrees: With the help of a Pan-Tilt camera, the tilt angle is 110
degrees.
-With foldable arms.
-GPS positioning mode can provide more accurate flight.
-With 5G wifi function, can be connected to APP, APK system to take
pictures / videos, transfer images in real time through mobile phone
camera
-5G wifi fpv distance can reach 2000 m.
-5G WiFi 6K HD camera can provide a variety of high-definition images
and videos.
-Follow me: The plane will control the phone fixedly and follow the
direction of movement of the operator.
-With altitude hold mode function, it can provide stable flight.
-The orbital motion will make the plane fly in circles, providing a
cooler shooting angle.
- Gesture recognition for photography: within 1-3m from the aircraft,
make a gesture facing the camera.
-Waypoint flight mode, just draw a route on the screen and use the
helicopter as a given path.
-With auto return function. When the aircraft loses the controller
signal, the aircraft will return to the takeoff point according to the
GPS trajectory.
-Using 11.4V 2850mAh battery, flight time is up to 28 minutes.
-Headless mode, no need to adjust aircraft position before flight.
-One-click back function, you can easily find your way home.
-One-click takeoff / landing. One-button take-off or landing
automatically, the drone will take off or return to the take-off
position.
-With low power protection overcurrent protection.
-Anti-interference uses 2.4GHz technology.
-6 channels, you can fly up, down, forward, backward, left, right.
-Six-axis gyroscope for more stable flight and easier control.
-The quadrotor fuselage is made of high-strength, high-strength
engineering plastics, which is light and durable.
pictures add music and video for sharing: single or multiple choices
for photos sharing, but videos can only be shared individually
Do you want to order it today? If you order, just tell us the quantity
and the shipping address, and I will arrange the logistics to deliver
the goods to you.
Thanks,
Kayden Hopkins