From: Robin Murphy <robin.murphy(a)arm.com>
> Now that PCI inbound window restrictions are handled generically between
> the of_pci resource parsing and the IOMMU layer, and described in the
> Juno DT, we can finally enable the PCIe SMMU without the risk of DMA
> mappings inadvertently allocating unusable addresses.
>
> Similarly, the relevant support for IOMMU mappings for peripheral
> transfers has been hooked up in the pl330 driver for ages, so we can
> happily enable the DMA SMMU without that breaking anything either.
>
> Signed-off-by: Robin Murphy <robin.murphy(a)arm.com>
When we build a kernel with 64k page size and run the ltp syscalls we
sporadically see a kernel crash while doing a mkfs on a connected SATA
drive. This is happening every third test run on any juno-r2 device in
the lab with the same kernel image (stable-rc 5.13.y, mainline and next)
with gcc-11.
Here is a snippet of the boot log [1]:
+ mkfs -t ext4 /dev/disk/by-id/ata-SanDisk_SDSSDA120G_165192443611
mke2fs 1.43.8 (1-Jan-2018)
Discarding device blocks: 4096/29305200
[ 55.344291] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 55.351423] ata1.00: irq_stat 0x00020002, failed to transmit command
FIS
[ 55.358205] ata1.00: failed command: DATA SET MANAGEMENT
[ 55.363561] ata1.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 12
dma 512 out
[ 55.363561] res ec/ff:00:00:00:00/00:00:00:00:ec/00 Emask
0x12 (ATA bus error)
[ 55.378955] ata1.00: status: { Busy }
[ 55.382658] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[ 55.387947] ata1: hard resetting link
[ 55.391653] ata1: controller in dubious state, performing PORT_RST
[ 57.588447] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 57.613471] ata1.00: configured for UDMA/100
[ 57.617866] ata1.00: device reported invalid CHS sector 0
[ 57.623397] ata1: EH complete
When we revert this patch we don't see any issue.
Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org>
Cheers,
Anders
[1]
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.13.y/build/v5.13…
Dear:
We can help you reduce production costs and improve product
competitiveness.
My name is jason and from ZHONGSHAN HONGLI WIRE&APPLIANCE FACTORY
CO.,LTD ,
I’m Glad to get your contact information from website and send a email
to you.
We are one of the leading manufactures of wire&power cords in China
,and we have more than 33years’ experience in this business. We’d like
to establish direct business relations with you on
the basis of equality and mutual benefits.
We have advanced facilities covering an area of 30,000 square meters
and hired more than 500 employees,
and have the capacity to make more than 5 million pieces of power
cords
every month, allowing us to meet your bulk orders and offer competitive
prices.
Our products have achieved ETL/cETL, VDE, ASTA,SASO,LOA, KTL, IMQ, SAA,
PSE, IRAM, CCC,
+S, TUV, INMETRO, SII .BIS International Safety Approvals. We can
supply almost power cords you want
and provide OEM&ODM service also.
Pls contact us if you have a purchase plan for cable and power cords,
It’s better if you can
send me a drawings or photos for them and I will give you a more
accurate and competitive
price and send you some samples immediately if you want ,we can assure
you of the best quality
products and perfect services.
Maybe you can view our homepage: [1]http://www.zshongli.com for more
details about our company and our products.
We are looking forward to receiving your early inquiry , and assuring
you that your requirements will have our
very best and prompt attention .
Best wishes.
JASON
ZHONGSHAN HONGLI WIRE&APPLIANCE FACTORY CO.,LTD
No.227 Dong’an rd. Haizhou,Guzhen town Zhongshan city,Guangdong pr.
China
TEL:+86-760-22362038
FAX:+86-760-22311533
MOB:+86 13432101479
[2]http://www.zshongli.com
E-mail:jason_1479@126.com
References
1. http://www.zshongli.com/
2. http://www.zshongli.com/
Dear Sir or Madam,
We have learned from one of our clients that you are one of
the leading company in your industry,. We are an international trading
company from China majorly export high quality products that you are
selling,to learn more about our products,you are welcome to visit our
website at [1]www.ftdceramic.com
We hope there will be an opportunity to work together.
Should you have any questions about the products we export, please do
not hesitate to contact me.
Thank you!
Best regards
Ivan
Chaozhou FTD Ceramic Cooperation Limited
Liya Indu.Zone,Guxiang,Chaozhou,Guangdong,China
Tel: 0086-768-2338905
Fax: 0086-768-2338905
Cell: 0086-186 8805 0197
E-mail: [2]ivan(a)ftdceramic.net
Website: [3]www.ftdceramic.com
References
1. http://www.ftdceramic.com/
2. mailto:ivan@ftdceramic.net
3. file:///C:/Users/Administrator/AppData/Roaming/Foxmail7/Temp-14928-20210527…
