On Thu, 17 Apr 2025 at 23:23, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.14.3 release. There are 449 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 19 Apr 2025 17:49:48 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.14.3-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.14.y and the diffstat can be found below.
thanks,
greg k-h
Regressions on arm64 dragonboard 410c boot failed with lkftconfig on the stable rc 6.14.3-rc1. While booting, the following kernel warnings were noticed and boot failed.
First seen on the 6.14.3-rc1 Good: v6.14.2 Bad: v6.14.2-450-g0e7f2bba84c1
Regressions found on arm64 dragonboard 410c: - Boot/clang-20-lkftconfig
Regression Analysis: - New regression? Yes - Reproducibility? Yes
Boot regression: arm64 dragonboard 410c WARNING regulator core.c regulator_put
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
## Boot log arm64 dragonboard 410c [ 3.924339] remoteproc:smd-edge: failed to parse smd edge [ 4.051490] msm_hsusb 78d9000.usb: Failed to create device link (0x180) with supplier remoteproc for /soc@0/usb@78d9000/ulpi/phy [ 4.055155] qcom-clk-smd-rpm remoteproc:smd-edge:rpm-requests:clock-controller: Error registering SMD clock driver (-1431655766) [ 4.062274] qcom-clk-smd-rpm remoteproc:smd-edge:rpm-requests:clock-controller: probe with driver qcom-clk-smd-rpm failed with error -1431655766 [ 4.091319] sdhci_msm 7864900.mmc: Got CD GPIO [ 4.101827] s3: Bringing 0uV into 1250000-1250000uV [ 4.101935] s3: failed to enable: (____ptrval____) [ 4.105657] ------------[ cut here ]------------ [ 4.110395] WARNING: CPU: 3 PID: 14 at drivers/regulator/core.c:2450 regulator_put (drivers/regulator/core.c:2473 drivers/regulator/core.c:2471) [ 4.115181] Modules linked in: [ 4.116774] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 4.123575] CPU: 3 UID: 0 PID: 14 Comm: kworker/u16:1 Not tainted 6.14.3-rc1 #1 [ 4.123587] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 4.123593] Workqueue: async async_run_entry_fn [ 4.123608] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.123619] pc : regulator_put (drivers/regulator/core.c:2473 drivers/regulator/core.c:2471) [ 4.124148] sdhci_msm 7864900.mmc: Got CD GPIO [ 4.128587] clk: Disabling unused clocks [ 4.133299] lr : regulator_put (drivers/regulator/core.c:2444 drivers/regulator/core.c:2471) [ 4.133312] sp : ffff80008300ba40 [ 4.133317] x29: ffff80008300ba40 x28: 0000000000000000 x27: ffff800081b850f8 [ 4.141083] PM: genpd: Disabling unused power domains [ 4.147271] [ 4.147274] x26: ffff800081b850b8 x25: 0000000000000001 x24: 00000000aaaaaaaa [ 4.147288] x23: ffff000009d64480 x22: ffff000005b10000 [ 4.151676] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx: -1431655766 [ 4.158467] x21: ffff000005b10000 [ 4.158474] x20: ffff0000044e41c0 x19: ffff0000055f00c0 x18: 0000000000000002 [ 4.158488] x17: 0000000000000000 [ 4.162763] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_ao: -1431655766 [ 4.166888] x16: 0000000000000001 x15: 0000000000000003 [ 4.166898] x14: ffff8000828ad200 x13: 0000000000000003 x12: 0000000000000003 [ 4.171011] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync cx_vfc: -1431655766 [ 4.174872] [ 4.174876] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 4.174889] x8 : 0000000000000001 [ 4.178116] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx: -1431655766 [ 4.185205] x7 : 0720072007200720 x6 : 0720072007200720 [ 4.185216] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000000 [ 4.190259] qcom-rpmpd remoteproc:smd-edge:rpm-requests:power-controller: failed to sync mx_ao: -1431655766 [ 4.191806] [ 4.191809] x2 : 0000000000000000 [ 4.198858] ALSA device list: [ 4.203876] x1 : ffff800080201224 x0 : ffff0000055f00c0 [ 4.203888] Call trace: [ 4.203893] regulator_put (drivers/regulator/core.c:2473 drivers/regulator/core.c:2471) (P) [ 4.213658] No soundcards found. [ 4.216808] regulator_register (drivers/regulator/core.c:5964) [ 4.216819] devm_regulator_register (drivers/regulator/devres.c:477) [ 4.329706] rpm_reg_probe (drivers/regulator/qcom_smd-regulator.c:1425 drivers/regulator/qcom_smd-regulator.c:1462) [ 4.329719] platform_probe (drivers/base/platform.c:1405) [ 4.329730] really_probe (drivers/base/dd.c:581 drivers/base/dd.c:658) [ 4.329743] __driver_probe_device (drivers/base/dd.c:0) [ 4.329755] driver_probe_device (drivers/base/dd.c:830) [ 4.329768] __device_attach_driver (drivers/base/dd.c:959) [ 4.329780] bus_for_each_drv (drivers/base/bus.c:462) [ 4.329791] __device_attach_async_helper (arch/arm64/include/asm/jump_label.h:36 drivers/base/dd.c:988) [ 4.329804] async_run_entry_fn (arch/arm64/include/asm/jump_label.h:36 kernel/async.c:131) [ 4.329814] process_scheduled_works (kernel/workqueue.c:3243 kernel/workqueue.c:3319) [ 4.329827] worker_thread (include/linux/list.h:373 kernel/workqueue.c:946 kernel/workqueue.c:3401) [ 4.375850] kthread (kernel/kthread.c:466) [ 4.379397] ret_from_fork (arch/arm64/kernel/entry.S:863) [�+HH��4.387392] s4: Bringing 0uV into 1850000-1850000uV [ 4.387486] s4: failed to enable: (____ptrval____) [ 4.391254] ------------[ cut here ]------------ [ 4.395957] WARNING: CPU: 2 PID: 14 at drivers/regulator/core.c:2450 regulator_put (drivers/regulator/core.c:2473 drivers/regulator/core.c:2471) [ 4.400742] Modules linked in: [ 4.409148] CPU: 2 UID: 0 PID: 14 Comm: kworker/u16:1 Tainted: G W 6.14.3-rc1 #1 [ 4.412028] Tainted: [W]=WARN [ 4.420949] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 4.421397] sdhci_msm 7864900.mmc: Got CD GPIO [ 4.423810] Workqueue: async async_run_entry_fn [ 4.434842] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.439274] pc : regulator_put (drivers/regulator/core.c:2473 drivers/regulator/core.c:2471) [ 4.446210] lr : regulator_put (drivers/regulator/core.c:2444 drivers/regulator/core.c:2471) [ 4.450376] sp : ffff80008300ba40 [ 4.454281] x29: ffff80008300ba40 x28: 0000000000000000 x27: ffff800081b85118 [ 4.457503] x26: ffff800081b850b8 x25: 0000000000000001 x24: 00000000aaaaaaaa [ 4.464622] x23: ffff00000459ae80 x22: ffff000004510800 x21: ffff000004510800 [ 4.471739] x20: ffff0000038e3180 x19: ffff0000055f1000 x18: 0000000000000068 [ 4.478857] x17: 0000000000000000 x16: 0000000000000024 x15: 0000000000000301 [ 4.485976] x14: 0000000000000024 x13: 00000000150d0cc9 x12: fffffffffffffff0 [ 4.493093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 4.500211] x8 : 0000000000000001 x7 : 0720072007200720 x6 : 0720072007200720 [ 4.507328] x5 : ffff000003201f00 x4 : 0000000000000000 x3 : 0000000000000010 [ 4.514446] x2 : ffff80008300b6d0 x1 : ffff800080201224 x0 : ffff0000055f1000 [ 4.521566] Call trace: [ 4.528671] regulator_put (drivers/regulator/core.c:2473 drivers/regulator/core.c:2471) (P) [ 4.530931] regulator_register (drivers/regulator/core.c:5964) [ 4.535099] devm_regulator_register (drivers/regulator/devres.c:477) [ 4.539006] rpm_reg_probe (drivers/regulator/qcom_smd-regulator.c:1425 drivers/regulator/qcom_smd-regulator.c:1462) [ 4.543518] platform_probe (drivers/base/platform.c:1405) [ 4.547249] really_probe (drivers/base/dd.c:581 drivers/base/dd.c:658) [ 4.550983] __driver_probe_device (drivers/base/dd.c:0) [ 4.554630] driver_probe_device (drivers/base/dd.c:830) [ 4.558970] __device_attach_driver (drivers/base/dd.c:959) [ 4.562965] bus_for_each_drv (drivers/base/bus.c:462) [ 4.567477] __device_attach_async_helper (arch/arm64/include/asm/jump_label.h:36 drivers/base/dd.c:988) [ 4.571646] async_run_entry_fn (arch/arm64/include/asm/jump_label.h:36 kernel/async.c:131) [ 4.576679] process_scheduled_works (kernel/workqueue.c:3243 kernel/workqueue.c:3319) [ 4.580586] worker_thread (include/linux/list.h:373 kernel/workqueue.c:946 kernel/workqueue.c:3401) [ 4.585358] kthread (kernel/kthread.c:466) [ 4.588915] ret_from_fork (arch/arm64/kernel/entry.S:863) [ 4.592304] ---[ end trace 0000000000000000 ]--- [ 4.597057] l2: Bringing 0uV into 1200000-1200000uV [ 4.600531] qcom_rpm_smd_regulator remoteproc:smd-edge:rpm-requests:regulators: l2: devm_regulator_register() failed, ret=-517 [ 4.605612] Unable to handle kernel paging request at virtual address ffffffffaaaaae6a [ 4.616566] Mem abort info: [ 4.624438] ESR = 0x0000000096000005 [ 4.627130] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.630953] SET = 0, FnV = 0 [ 4.636417] EA = 0, S1PTW = 0 [ 4.639281] FSC = 0x05: level 1 translation fault [ 4.642325] Data abort info: [ 4.647183] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 4.650313] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.655606] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.660730] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000824f1000 [ 4.666115] [ffffffffaaaaae6a] pgd=0000000000000000, p4d=0000000082f1c403, pud=0000000000000000 [ 4.672816] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 4.681201] Modules linked in: [ 4.687443] CPU: 2 UID: 0 PID: 14 Comm: kworker/u16:1 Tainted: G W 6.14.3-rc1 #1 [ 4.690584] Tainted: [W]=WARN [ 4.699505] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 4.702381] Workqueue: async async_run_entry_fn [ 4.709147] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.713405] pc : regulator_unregister (drivers/regulator/core.c:5991) [ 4.720342] lr : devm_rdev_release (drivers/regulator/devres.c:453) [ 4.725203] sp : ffff80008300bae0 [ 4.729454] x29: ffff80008300bb00 x28: ffff000003301340 x27: 00000000000001c8 [ 4.732683] x26: ffff000003231a00 x25: ffff00000459ae00 x24: ffff000003301340 [ 4.739794] x23: ffff80008286ed00 x22: ffff8000823fc4a1 x21: ffff0000033aac00 [ 4.746913] x20: ffff000005ac7410 x19: ffff80008300bba8 x18: 0000000000000002 [ 4.754030] x17: 6f74616c75676572 x16: 3a73747365757165 x15: 00000ff00003fd36 [ 4.761148] x14: 000000000000ffff x13: 0000000000000020 x12: 0000000000000003 [ 4.768267] x11: 0000000000000000 x10: 0000000000000000 x9 : ffff800080b59fe0 [ 4.775384] x8 : 06678d1f10cf8900 x7 : 3d4e5f454c424954 x6 : 000000004e514553 [ 4.782502] x5 : 0000000000000008 x4 : ffff800082276255 x3 : 0000000000000010 [ 4.789620] x2 : ffff80008300ba60 x1 : ffff0000033aac80 x0 : ffffffffaaaaaaaa [ 4.796740] Call trace: [ 4.803845] regulator_unregister (drivers/regulator/core.c:5991) (P) [ 4.806108] devm_rdev_release (drivers/regulator/devres.c:453) [ 4.810966] release_nodes (drivers/base/devres.c:506) [ 4.814872] devres_release_all (drivers/base/devres.c:0) [ 4.818432] really_probe (drivers/base/dd.c:551 drivers/base/dd.c:724) [ 4.822423] __driver_probe_device (drivers/base/dd.c:0) [ 4.826072] driver_probe_device (drivers/base/dd.c:830) [ 4.830324] __device_attach_driver (drivers/base/dd.c:959) [ 4.834317] bus_for_each_drv (drivers/base/bus.c:462) [ 4.838831] __device_attach_async_helper (arch/arm64/include/asm/jump_label.h:36 drivers/base/dd.c:988) [ 4.843001] async_run_entry_fn (arch/arm64/include/asm/jump_label.h:36 kernel/async.c:131) [ 4.848032] process_scheduled_works (kernel/workqueue.c:3243 kernel/workqueue.c:3319) [ 4.851941] worker_thread (include/linux/list.h:373 kernel/workqueue.c:946 kernel/workqueue.c:3401) [ 4.856713] kthread (kernel/kthread.c:466) [ 4.860270] ret_from_fork (arch/arm64/kernel/entry.S:863) [ 4.863661] Code: d5384108 f9430d08 f81f83a8 b4000bc0 (f941e014) All code ========
Code starting with the faulting instruction =========================================== [ 4.867227] ---[ end trace 0000000000000000 ]--- [ 14.238655] sdhci_msm 7864900.mmc: Got CD GPIO
## Source * Kernel version: 6.14.3-rc1 * Git tree: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git * Git sha: 0e7f2bba84c1f492e15812fade27cc0a697f3cb6 * Git describe: v6.14.2-450-g0e7f2bba84c1 * Project details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.14.y/Boot/v6.14.2... * Architectures: arm64 dragonboard 410c * Toolchains: clang-20 * Kconfigs: lkftconfig
## Boot * Boot log: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.14.y/build/v6.14.... * Boot history: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.14.y/build/v6.14.... * Boot details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.14.y/build/v6.14.... * Build link: https://storage.tuxsuite.com/public/linaro/lkft/builds/2vrqGz3vUNvc2w9PJfCD1... * Kernel config: https://storage.tuxsuite.com/public/linaro/lkft/builds/2vrqGz3vUNvc2w9PJfCD1...
-- Linaro LKFT https://lkft.linaro.org