On Thu, 18 Jun 2020 at 07:18, Sasha Levin sashal@kernel.org wrote:
From: Miklos Szeredi mszeredi@redhat.com
[ Upstream commit 56230d956739b9cb1cbde439d76227d77979a04d ]
Check permission before opening a real file.
ovl_path_open() is used by readdir and copy-up routines.
ovl_permission() theoretically already checked copy up permissions, but it doesn't hurt to re-do these checks during the actual copy-up.
For directory reading ovl_permission() only checks access to topmost underlying layer. Readdir on a merged directory accesses layers below the topmost one as well. Permission wasn't checked for these layers.
Note: modifying ovl_permission() to perform this check would be far more complex and hence more bug prone. The result is less precise permissions returned in access(2). If this turns out to be an issue, we can revisit this bug.
Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org
fs/overlayfs/util.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c index afdc2533ce74..76d6610767f6 100644 --- a/fs/overlayfs/util.c +++ b/fs/overlayfs/util.c @@ -307,7 +307,32 @@ bool ovl_is_whiteout(struct dentry *dentry)
struct file *ovl_path_open(struct path *path, int flags) {
return dentry_open(path, flags | O_NOATIME, current_cred());
struct inode *inode = d_inode(path->dentry);int err, acc_mode;if (flags & ~(O_ACCMODE | O_LARGEFILE))BUG();switch (flags & O_ACCMODE) {case O_RDONLY:acc_mode = MAY_READ;break;case O_WRONLY:acc_mode = MAY_WRITE;break;default:BUG();
This BUG: triggered on stable-rc 5.7, 5.4, 4.19 and 4.14.
steps to reproduce: - cd /opt/ltp - ./runltp -s execveat03
Test output: mke2fs 1.43.8 (1-Jan-2018) [ 47.739682] ------------[ cut here ]------------ [ 47.744317] kernel BUG at fs/overlayfs/util.c:314! [ 47.749117] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 47.754608] Modules linked in: overlay rfkill crc32_ce crct10dif_ce fuse [ 47.761335] Process execveat03 (pid: 2880, stack limit = 0xffff00000ec60000) [ 47.768397] CPU: 3 PID: 2880 Comm: execveat03 Not tainted 4.14.186-rc1-00111-gb518002db397 #1 [ 47.776933] Hardware name: ARM Juno development board (r2) (DT) [ 47.782860] task: ffff8009546ade80 task.stack: ffff00000ec60000 [ 47.788819] pc : ovl_path_open+0xa8/0xb0 [overlay] [ 47.793641] lr : ovl_check_d_type_supported+0x38/0xf0 [overlay] [ 47.799567] sp : ffff00000ec63ba0 pstate : 40000145 [ 47.804449] x29: ffff00000ec63ba0 x28: 0000000000000000 [ 47.809770] x27: ffff800955bfb710 x26: ffff800955bfb700 [ 47.815091] x25: ffff00000ec63ce0 x24: 0000000000000000 [ 47.820412] x23: ffff00000ec63cd0 x22: 0000000000000001 [ 47.825733] x21: ffff8009509609b8 x20: ffff00000ec63ce0 [ 47.831054] x19: 0000000000004000 x18: 0000000000000000 [ 47.836375] x17: 0000000000000000 x16: ffff0000080d1800 [ 47.841696] x15: 095a041701101c00 x14: ff00000000000000 [ 47.847017] x13: 0000000000000000 x12: 000000000000000b [ 47.852338] x11: 0101010101010101 x10: ffff800950960b40 [ 47.857659] x9 : 7f7f7f7f7f7f7f7f x8 : 6f2d6c6473727872 [ 47.862980] x7 : 001c100117045a09 x6 : 095a041701101c00 [ 47.868301] x5 : 0000000000000000 x4 : 0000000000000000 [ 47.873622] x3 : 0000000000000000 x2 : ffff000000b7ec88 [ 47.878943] x1 : ffff800953f78180 x0 : 0000000000004000 [ 47.884264] Call trace: [ 47.886736] ovl_path_open+0xa8/0xb0 [overlay] [ 47.891209] ovl_check_d_type_supported+0x38/0xf0 [overlay] [ 47.896812] ovl_fill_super+0x540/0xc98 [overlay] [ 47.901528] mount_nodev+0x4c/0xa8 [ 47.904954] ovl_mount+0x14/0x28 [overlay] [ 47.909056] mount_fs+0x54/0x188 [ 47.912289] vfs_kern_mount.part.0+0x4c/0x118 [ 47.916651] do_mount+0x1cc/0xbe0 [ 47.919970] compat_SyS_mount+0xb0/0x1b8 [ 47.923899] __sys_trace_return+0x0/0x4 [ 47.927742] Code: f94013f5 a8c37bfd d65f03c0 d4210000 (d4210000) [ 47.933845] ---[ end trace 1b32b515dde8d9db ]---
Test link, https://lkft.validation.linaro.org/scheduler/job/1517781#L1266
metadata: git branch: linux-4.14.y git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git git commit: b518002db397b51173a3e17045bfb3ff0e1aa0ed kernel-config: https://builds.tuxbuild.com/B_xCv6-0v8npcEVw6hA_ZQ/kernel.config
On Tue, Jun 23, 2020 at 08:55:38PM +0530, Naresh Kamboju wrote:
On Thu, 18 Jun 2020 at 07:18, Sasha Levin sashal@kernel.org wrote:
From: Miklos Szeredi mszeredi@redhat.com
[ Upstream commit 56230d956739b9cb1cbde439d76227d77979a04d ]
Check permission before opening a real file.
ovl_path_open() is used by readdir and copy-up routines.
ovl_permission() theoretically already checked copy up permissions, but it doesn't hurt to re-do these checks during the actual copy-up.
For directory reading ovl_permission() only checks access to topmost underlying layer. Readdir on a merged directory accesses layers below the topmost one as well. Permission wasn't checked for these layers.
Note: modifying ovl_permission() to perform this check would be far more complex and hence more bug prone. The result is less precise permissions returned in access(2). If this turns out to be an issue, we can revisit this bug.
Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org
fs/overlayfs/util.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c index afdc2533ce74..76d6610767f6 100644 --- a/fs/overlayfs/util.c +++ b/fs/overlayfs/util.c @@ -307,7 +307,32 @@ bool ovl_is_whiteout(struct dentry *dentry)
struct file *ovl_path_open(struct path *path, int flags) {
return dentry_open(path, flags | O_NOATIME, current_cred());
struct inode *inode = d_inode(path->dentry);int err, acc_mode;if (flags & ~(O_ACCMODE | O_LARGEFILE))BUG();switch (flags & O_ACCMODE) {case O_RDONLY:acc_mode = MAY_READ;break;case O_WRONLY:acc_mode = MAY_WRITE;break;default:BUG();This BUG: triggered on stable-rc 5.7, 5.4, 4.19 and 4.14.
steps to reproduce: - cd /opt/ltp - ./runltp -s execveat03
Yup, that patch has been dropped, thanks for testing!
On Tue, 23 Jun 2020 at 22:46, Sasha Levin sashal@kernel.org wrote:
On Tue, Jun 23, 2020 at 08:55:38PM +0530, Naresh Kamboju wrote:
On Thu, 18 Jun 2020 at 07:18, Sasha Levin sashal@kernel.org wrote:
From: Miklos Szeredi mszeredi@redhat.com
[ Upstream commit 56230d956739b9cb1cbde439d76227d77979a04d ]
Check permission before opening a real file.
ovl_path_open() is used by readdir and copy-up routines.
ovl_permission() theoretically already checked copy up permissions, but it doesn't hurt to re-do these checks during the actual copy-up.
For directory reading ovl_permission() only checks access to topmost underlying layer. Readdir on a merged directory accesses layers below the topmost one as well. Permission wasn't checked for these layers.
Note: modifying ovl_permission() to perform this check would be far more complex and hence more bug prone. The result is less precise permissions returned in access(2). If this turns out to be an issue, we can revisit this bug.
Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org
fs/overlayfs/util.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c index afdc2533ce74..76d6610767f6 100644 --- a/fs/overlayfs/util.c +++ b/fs/overlayfs/util.c @@ -307,7 +307,32 @@ bool ovl_is_whiteout(struct dentry *dentry)
struct file *ovl_path_open(struct path *path, int flags) {
return dentry_open(path, flags | O_NOATIME, current_cred());
struct inode *inode = d_inode(path->dentry);int err, acc_mode;if (flags & ~(O_ACCMODE | O_LARGEFILE))BUG();switch (flags & O_ACCMODE) {case O_RDONLY:acc_mode = MAY_READ;break;case O_WRONLY:acc_mode = MAY_WRITE;break;default:BUG();This BUG: triggered on stable-rc 5.7, 5.4, 4.19 and 4.14.
steps to reproduce: - cd /opt/ltp - ./runltp -s execveat03
Yup, that patch has been dropped, thanks for testing!
After reverting this patch I see these messages while testing LTP execveat03. [ 87.931537] overlayfs: upper fs does not support RENAME_WHITEOUT. [ 87.937693] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off.>
- Naresh
-- Thanks, Sasha
On Tue, Jun 23, 2020 at 9:28 PM Naresh Kamboju naresh.kamboju@linaro.org wrote:
On Tue, 23 Jun 2020 at 22:46, Sasha Levin sashal@kernel.org wrote:
On Tue, Jun 23, 2020 at 08:55:38PM +0530, Naresh Kamboju wrote:
On Thu, 18 Jun 2020 at 07:18, Sasha Levin sashal@kernel.org wrote:
From: Miklos Szeredi mszeredi@redhat.com
[ Upstream commit 56230d956739b9cb1cbde439d76227d77979a04d ]
Check permission before opening a real file.
ovl_path_open() is used by readdir and copy-up routines.
ovl_permission() theoretically already checked copy up permissions, but it doesn't hurt to re-do these checks during the actual copy-up.
For directory reading ovl_permission() only checks access to topmost underlying layer. Readdir on a merged directory accesses layers below the topmost one as well. Permission wasn't checked for these layers.
Note: modifying ovl_permission() to perform this check would be far more complex and hence more bug prone. The result is less precise permissions returned in access(2). If this turns out to be an issue, we can revisit this bug.
Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org
fs/overlayfs/util.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c index afdc2533ce74..76d6610767f6 100644 --- a/fs/overlayfs/util.c +++ b/fs/overlayfs/util.c @@ -307,7 +307,32 @@ bool ovl_is_whiteout(struct dentry *dentry)
struct file *ovl_path_open(struct path *path, int flags) {
return dentry_open(path, flags | O_NOATIME, current_cred());
struct inode *inode = d_inode(path->dentry);int err, acc_mode;if (flags & ~(O_ACCMODE | O_LARGEFILE))BUG();switch (flags & O_ACCMODE) {case O_RDONLY:acc_mode = MAY_READ;break;case O_WRONLY:acc_mode = MAY_WRITE;break;default:BUG();This BUG: triggered on stable-rc 5.7, 5.4, 4.19 and 4.14.
steps to reproduce: - cd /opt/ltp - ./runltp -s execveat03
Yup, that patch has been dropped, thanks for testing!
After reverting this patch I see these messages while testing LTP execveat03. [ 87.931537] overlayfs: upper fs does not support RENAME_WHITEOUT.
This warning is new.
[ 87.937693] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off.>
This one is pretty old.
They will show up when testing with a filesystem that is suboptimal for upper fs.
The warning is stating a fact. The suboptimal behavior with those filesystems has been there since the beginning.
Thanks, Amir.
-
Amir Goldstein -
Naresh Kamboju -
Sasha Levin