This is the start of the stable review cycle for the 5.6.11 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 06 May 2020 16:52:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.11-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.6.11-rc1
Jens Axboe axboe@kernel.dk io_uring: statx must grab the file table for valid fd
Vincenzo Frascino vincenzo.frascino@arm.com arm64: vdso: Add -fasynchronous-unwind-tables to cflags
Andy Shevchenko andriy.shevchenko@linux.intel.com dmaengine: dmatest: Fix process hang when reading 'wait' parameter
Matt Roper matthew.d.roper@intel.com drm/i915: Use proper fault mask in interrupt postinstall too
Andy Shevchenko andriy.shevchenko@linux.intel.com dmaengine: dmatest: Fix iteration non-stop logic
Andreas Gruenbacher agruenba@redhat.com nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl
Xiyu Yang xiyuyang19@fudan.edu.cn drm/i915/selftests: Fix i915_address_space refcnt leak
Niklas Cassel niklas.cassel@wdc.com nvme: prevent double free in nvme_alloc_ns() error handling
David Howells dhowells@redhat.com Fix use after free in get_tree_bdev()
Arnd Bergmann arnd@arndb.de ALSA: opti9xx: shut up gcc-10 range warning
ryan_chen ryan_chen@aspeedtech.com i2c: aspeed: Avoid i2c interrupt status clear race condition.
Suravee Suthikulpanit suravee.suthikulpanit@amd.com iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system
Lu Baolu baolu.lu@linux.intel.com iommu/vt-d: Use right Kconfig option name
Greg Kroah-Hartman gregkh@linuxfoundation.org iommu: Properly export iommu_group_get_for_dev()
David Disseldorp ddiss@suse.de scsi: target/iblock: fix WRITE SAME zeroing
Dave Jiang dave.jiang@intel.com dmaengine: fix channel index enumeration
Grygorii Strashko grygorii.strashko@ti.com dmaengine: ti: k3-psil: fix deadlock on error path
Tang Bin tangbin@cmss.chinamobile.com iommu/qcom: Fix local_base status check
Sean Christopherson sean.j.christopherson@intel.com vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()
Yan Zhao yan.y.zhao@intel.com vfio: avoid possible overflow in vfio_iommu_type1_pin_pages
YueHaibing yuehaibing@huawei.com dmaengine: hisilicon: Fix build error without PCI_MSI
Rayagonda Kokatanur rayagonda.kokatanur@broadcom.com i2c: iproc: generate stop event for slave writes
Dan Carpenter dan.carpenter@oracle.com RDMA/cm: Fix an error check in cm_alloc_id_priv()
Jason Gunthorpe jgg@ziepe.ca RDMA/cm: Fix ordering of xa_alloc_cyclic() in ib_create_cm_id()
Leon Romanovsky leon@kernel.org RDMA/core: Fix race between destroy and release FD object
Leon Romanovsky leon@kernel.org RDMA/core: Fix overwriting of uobj in case of error
Leon Romanovsky leon@kernel.org RDMA/core: Prevent mixed use of FDs between shared ufiles
Jason Gunthorpe jgg@ziepe.ca RDMA/siw: Fix potential siw_mem refcnt leak in siw_fastreg_mr()
Alaa Hleihel alaa@mellanox.com RDMA/mlx4: Initialize ib_spec on the stack
Jason Gunthorpe jgg@ziepe.ca RDMA/uverbs: Fix a race with disassociate and exit_mmap()
Aharon Landau aharonl@mellanox.com RDMA/mlx5: Set GRH fields in query QP on RoCE
Martin Wilck mwilck@suse.com scsi: qla2xxx: check UNLOADING before posting async work
Martin Wilck mwilck@suse.com scsi: qla2xxx: set UNLOADING before waiting for session deletion
Christoph Hellwig hch@lst.de block: remove the bd_openers checks in blk_drop_partitions
Russell King rmk+kernel@armlinux.org.uk ARM: dts: imx6qdl-sr-som-ti: indicate powering off wifi is safe
Gabriel Krisman Bertazi krisman@collabora.com dm multipath: use updated MPATHF_QUEUE_IO on mapping for bio-based mpath
Mikulas Patocka mpatocka@redhat.com dm writecache: fix data corruption when reloading the target
Sunwook Eom speed.eom@samsung.com dm verity fec: fix hash block number in verity_fec_decode
Dexuan Cui decui@microsoft.com PM: hibernate: Freeze kernel threads in software_resume()
Kai-Heng Feng kai.heng.feng@canonical.com PM: ACPI: Output correct message on target power state
Sudip Mukherjee sudipm.mukherjee@gmail.com IB/rdmavt: Always return ERR_PTR from rvt_create_mmap_info()
Paul Moore paul@paul-moore.com selinux: properly handle multiple messages in selinux_netlink_send()
Al Viro viro@zeniv.linux.org.uk dlmfs_file_write(): fix the bogosity in handling non-zero *ppos
Dexuan Cui decui@microsoft.com Drivers: hv: vmbus: Fix Suspend-to-Idle for Generation-2 VM
Dexuan Cui decui@microsoft.com x86/hyperv: Suspend/resume the VP assist page for hibernation
Dan Carpenter dan.carpenter@oracle.com i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling
Takashi Iwai tiwai@suse.de ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
Vasily Khoruzhick anarsoul@gmail.com ALSA: line6: Fix POD HD500 audio playback
Wu Bo wubo40@huawei.com ALSA: hda/hdmi: fix without unlocked before return
Takashi Iwai tiwai@suse.de ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
Hui Wang hui.wang@canonical.com ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
Iuliana Prodan iuliana.prodan@nxp.com crypto: caam - fix the address of the last entry of S/G
Martin Blumenstingl martin.blumenstingl@googlemail.com mmc: meson-mx-sdio: remove the broken ->card_busy() op
Martin Blumenstingl martin.blumenstingl@googlemail.com mmc: meson-mx-sdio: Set MMC_CAP_WAIT_WHILE_BUSY
Veerabhadrarao Badiganti vbadigan@codeaurora.org mmc: sdhci-msm: Enable host capabilities pertains to R1b response
Adrian Hunter adrian.hunter@intel.com mmc: sdhci-pci: Fix eMMC driver strength for BYT-based controllers
Marek Behún marek.behun@nic.cz mmc: sdhci-xenon: fix annoying 1.8V regulator warning
Douglas Anderson dianders@chromium.org mmc: cqhci: Avoid false "cqhci: CQE stuck on" by not open-coding timeout loop
Qu Wenruo wqu@suse.com btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info
Filipe Manana fdmanana@suse.com btrfs: fix partial loss of prealloc extent past i_size after fsync
Xiyu Yang xiyuyang19@fudan.edu.cn btrfs: fix block group leak when removing fails
Xiyu Yang xiyuyang19@fudan.edu.cn btrfs: fix transaction leak in btrfs_recover_relocation
Olga Kornievskaia olga.kornievskaia@gmail.com NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION
Vasily Averin vvs@virtuozzo.com drm/qxl: qxl_release use after free
Vasily Averin vvs@virtuozzo.com drm/qxl: qxl_release leak in qxl_hw_surface_alloc()
Vasily Averin vvs@virtuozzo.com drm/qxl: qxl_release leak in qxl_draw_dirty_fb()
Chris Wilson chris@chris-wilson.co.uk drm/i915/gt: Check cacheline is valid before acquiring
Chris Wilson chris@chris-wilson.co.uk drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma()
Rodrigo Siqueira Rodrigo.Siqueira@amd.com drm/amd/display: Fix green screen issue after suspend
Ville Syrjälä ville.syrjala@linux.intel.com drm/edid: Fix off-by-one in DispID DTD pixel clock
Marek Olšák marek.olsak@amd.com drm/amdgpu: invalidate L2 before SDMA IBs (v2)
Daniel Vetter daniel.vetter@intel.com dma-buf: Fix SET_NAME ioctl uapi
Christian König christian.koenig@amd.com drm/scheduler: fix drm_sched_get_cleanup_job
-------------
Diffstat:
Makefile | 4 +- arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi | 1 + arch/arm64/kernel/vdso/Makefile | 2 +- arch/x86/hyperv/hv_init.c | 12 +++- block/partition-generic.c | 2 +- drivers/acpi/device_pm.c | 4 +- drivers/crypto/caam/caamalg.c | 2 +- drivers/dma-buf/dma-buf.c | 3 +- drivers/dma/Kconfig | 3 +- drivers/dma/dmaengine.c | 60 +++++++++---------- drivers/dma/dmatest.c | 6 +- drivers/dma/ti/k3-psil.c | 1 + drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h | 16 ++++++ drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c | 14 ++++- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 38 +++++++++--- drivers/gpu/drm/drm_edid.c | 2 +- drivers/gpu/drm/i915/gem/i915_gem_tiling.c | 20 ++++++- drivers/gpu/drm/i915/gem/selftests/huge_pages.c | 12 ++-- drivers/gpu/drm/i915/gt/intel_timeline.c | 2 + drivers/gpu/drm/i915/i915_irq.c | 6 +- drivers/gpu/drm/i915/i915_vma.c | 10 ++-- drivers/gpu/drm/qxl/qxl_cmd.c | 10 ++-- drivers/gpu/drm/qxl/qxl_display.c | 6 +- drivers/gpu/drm/qxl/qxl_draw.c | 7 ++- drivers/gpu/drm/qxl/qxl_ioctl.c | 5 +- drivers/gpu/drm/scheduler/sched_main.c | 2 +- drivers/hv/vmbus_drv.c | 43 +++++++++++--- drivers/i2c/busses/i2c-amd-mp2-pci.c | 2 +- drivers/i2c/busses/i2c-aspeed.c | 5 +- drivers/i2c/busses/i2c-bcm-iproc.c | 3 + drivers/infiniband/core/cm.c | 27 ++++----- drivers/infiniband/core/rdma_core.c | 9 ++- drivers/infiniband/core/uverbs_main.c | 4 ++ drivers/infiniband/hw/mlx4/main.c | 3 +- drivers/infiniband/hw/mlx5/qp.c | 4 +- drivers/infiniband/sw/rdmavt/cq.c | 4 +- drivers/infiniband/sw/rdmavt/mmap.c | 4 +- drivers/infiniband/sw/rdmavt/qp.c | 4 +- drivers/infiniband/sw/rdmavt/srq.c | 4 +- drivers/infiniband/sw/siw/siw_qp_tx.c | 15 +++-- drivers/iommu/amd_iommu_init.c | 2 +- drivers/iommu/intel-iommu.c | 4 +- drivers/iommu/iommu.c | 2 +- drivers/iommu/qcom_iommu.c | 5 +- drivers/md/dm-mpath.c | 6 +- drivers/md/dm-verity-fec.c | 2 +- drivers/md/dm-writecache.c | 52 ++++++++++++----- drivers/mmc/host/cqhci.c | 21 ++++--- drivers/mmc/host/meson-mx-sdio.c | 11 +--- drivers/mmc/host/sdhci-msm.c | 2 + drivers/mmc/host/sdhci-pci-core.c | 3 + drivers/mmc/host/sdhci-xenon.c | 10 ++++ drivers/nvme/host/core.c | 2 + drivers/scsi/qla2xxx/qla_os.c | 35 ++++++------ drivers/target/target_core_iblock.c | 2 +- drivers/vfio/vfio_iommu_type1.c | 6 +- fs/btrfs/block-group.c | 16 ++++-- fs/btrfs/relocation.c | 1 + fs/btrfs/transaction.c | 13 ++++- fs/btrfs/tree-log.c | 43 +++++++++++++- fs/io_uring.c | 12 +++- fs/nfs/nfs3acl.c | 22 ++++--- fs/nfs/nfs4proc.c | 8 +++ fs/ocfs2/dlmfs/dlmfs.c | 27 ++++----- fs/super.c | 2 +- include/linux/dmaengine.h | 4 +- include/linux/nfs_xdr.h | 2 + include/linux/sunrpc/clnt.h | 5 ++ include/uapi/linux/dma-buf.h | 6 ++ kernel/power/hibernate.c | 7 +++ security/selinux/hooks.c | 70 +++++++++++++++-------- sound/core/oss/pcm_plugin.c | 20 ++++--- sound/isa/opti9xx/miro.c | 9 ++- sound/isa/opti9xx/opti92x-ad1848.c | 9 ++- sound/pci/hda/patch_hdmi.c | 4 +- sound/pci/hda/patch_realtek.c | 1 + sound/usb/line6/podhd.c | 22 ++----- sound/usb/quirks.c | 2 +- 78 files changed, 554 insertions(+), 297 deletions(-)
On 04/05/2020 18:57, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.6.11 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 06 May 2020 16:52:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.11-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y and the diffstat can be found below.
thanks,
greg k-h
All tests are passing for Tegra ...
Test results for stable-v5.6: 13 builds: 13 pass, 0 fail 24 boots: 24 pass, 0 fail 40 tests: 40 pass, 0 fail
Linux version: 5.6.11-rc1-g6cd4bcd666cd Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04
Cheers Jon
On Tue, May 05, 2020 at 09:38:43AM +0100, Jon Hunter wrote:
On 04/05/2020 18:57, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.6.11 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 06 May 2020 16:52:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.11-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y and the diffstat can be found below.
thanks,
greg k-h
All tests are passing for Tegra ...
Test results for stable-v5.6: 13 builds: 13 pass, 0 fail 24 boots: 24 pass, 0 fail 40 tests: 40 pass, 0 fail
Linux version: 5.6.11-rc1-g6cd4bcd666cd Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04
Thanks for testing all of these and letting me know.
greg k-h
On Mon, 4 May 2020 at 23:36, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.6.11 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 06 May 2020 16:52:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.11-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.
Summary ------------------------------------------------------------------------
kernel: 5.6.11-rc1 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git git branch: linux-5.6.y git commit: 6cd4bcd666cd831acf192bd7350b94121469ebcb git describe: v5.6.10-74-g6cd4bcd666cd Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.6-oe/build/v5.6.10-74-g...
No regressions (compared to build v5.6.10)
No fixes (compared to build v5.6.10)
Ran 29045 total tests in the following environments and test suites.
Environments -------------- - dragonboard-410c - hi6220-hikey - i386 - juno-r2 - juno-r2-compat - juno-r2-kasan - nxp-ls2088 - qemu_arm - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - x86 - x86-kasan
Test Suites ----------- * build * install-android-platform-tools-r2600 * install-android-platform-tools-r2800 * kselftest * kselftest/drivers * kselftest/filesystems * libgpiod * linux-log-parser * ltp-cap_bounds-tests * ltp-cpuhotplug-tests * ltp-crypto-tests * ltp-dio-tests * ltp-fcntl-locktests-tests * ltp-filecaps-tests * ltp-fs_bind-tests * ltp-fs_perms_simple-tests * ltp-fsx-tests * ltp-io-tests * kvm-unit-tests * libhugetlbfs * ltp-containers-tests * ltp-nptl-tests * ltp-pty-tests * ltp-securebits-tests * perf * kselftest/net * kselftest/networking * ltp-commands-tests * ltp-cve-tests * ltp-fs-tests * ltp-hugetlb-tests * ltp-ipc-tests * ltp-math-tests * ltp-mm-tests * ltp-open-posix-tests * ltp-sched-tests * ltp-syscalls-tests * network-basic-tests * v4l2-compliance * kselftest-vsyscall-mode-native * kselftest-vsyscall-mode-native/drivers * kselftest-vsyscall-mode-native/filesystems * kselftest-vsyscall-mode-native/net * kselftest-vsyscall-mode-native/networking * kselftest-vsyscall-mode-none * kselftest-vsyscall-mode-none/drivers * kselftest-vsyscall-mode-none/filesystems * kselftest-vsyscall-mode-none/net * kselftest-vsyscall-mode-none/networking
On Tue, May 05, 2020 at 07:57:55PM +0530, Naresh Kamboju wrote:
On Mon, 4 May 2020 at 23:36, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.6.11 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 06 May 2020 16:52:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.11-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.
Thanks for testing all of these and letting me know.
greg k-h
On 5/4/20 11:57 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.6.11 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 06 May 2020 16:52:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.11-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y and the diffstat can be found below.
thanks,
greg k-h
Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.6.11-rc1
Takashi Iwai tiwai@suse.de ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
Vasily Khoruzhick anarsoul@gmail.com ALSA: line6: Fix POD HD500 audio playback
Wu Bo wubo40@huawei.com ALSA: hda/hdmi: fix without unlocked before return
Takashi Iwai tiwai@suse.de ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
Hui Wang hui.wang@canonical.com ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
sound/core/oss/pcm_plugin.c | 20 ++++--- sound/isa/opti9xx/miro.c | 9 ++- sound/isa/opti9xx/opti92x-ad1848.c | 9 ++- sound/pci/hda/patch_hdmi.c | 4 +- sound/pci/hda/patch_realtek.c | 1 + sound/usb/line6/podhd.c | 22 ++----- sound/usb/quirks.c | 2 +- 78 files changed, 554 insertions(+), 297 deletions(-)
Compiled and booted on my test system. Tons of the of following errors in dmesg
Adding Takashi Iwai
[ 33.980302] usb 2-2.4: 1:1: cannot set freq 48000 to ep 0x1 [ 49.340581] usb 2-2.4: 2:1: cannot set freq 48000 to ep 0x82 [ 59.580511] usb 2-2.4: 13:0: cannot get min/max values for control 2 (id 13) [ 64.700532] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 69.792257] usb 2-2.4: 10:0: cannot get min/max values for control 2 (id 10) [ 69.792736] usbcore: registered new interface driver snd-usb-audio [ 74.871038] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 79.967099] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 85.076961] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 90.191415] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 95.308843] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9)
followed by
[ 131.172280] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 136.259909] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 141.380345] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 146.500227] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 151.620227] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 156.739899] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 161.859999] usb 2-2.4: 1:1: usb_set_interface failed (-110)
I have audio on that port. I haven't tried yet reverting these sound patches yet. demsg is filling up with these messages for sure.
thanks, -- Shuah
On 5/5/20 9:25 AM, shuah wrote:
On 5/4/20 11:57 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.6.11 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 06 May 2020 16:52:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.11-rc1....
or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y and the diffstat can be found below.
thanks,
greg k-h
Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.6.11-rc1
Takashi Iwai tiwai@suse.de ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
Vasily Khoruzhick anarsoul@gmail.com ALSA: line6: Fix POD HD500 audio playback
Wu Bo wubo40@huawei.com ALSA: hda/hdmi: fix without unlocked before return
Takashi Iwai tiwai@suse.de ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
Hui Wang hui.wang@canonical.com ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
sound/core/oss/pcm_plugin.c | 20 ++++--- sound/isa/opti9xx/miro.c | 9 ++- sound/isa/opti9xx/opti92x-ad1848.c | 9 ++- sound/pci/hda/patch_hdmi.c | 4 +- sound/pci/hda/patch_realtek.c | 1 + sound/usb/line6/podhd.c | 22 ++----- sound/usb/quirks.c | 2 +- 78 files changed, 554 insertions(+), 297 deletions(-)
Compiled and booted on my test system. Tons of the of following errors in dmesg
Adding Takashi Iwai
[ 33.980302] usb 2-2.4: 1:1: cannot set freq 48000 to ep 0x1 [ 49.340581] usb 2-2.4: 2:1: cannot set freq 48000 to ep 0x82 [ 59.580511] usb 2-2.4: 13:0: cannot get min/max values for control 2 (id 13) [ 64.700532] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 69.792257] usb 2-2.4: 10:0: cannot get min/max values for control 2 (id 10) [ 69.792736] usbcore: registered new interface driver snd-usb-audio [ 74.871038] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 79.967099] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 85.076961] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 90.191415] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 95.308843] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9)
followed by
[ 131.172280] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 136.259909] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 141.380345] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 146.500227] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 151.620227] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 156.739899] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 161.859999] usb 2-2.4: 1:1: usb_set_interface failed (-110)
I have audio on that port. I haven't tried yet reverting these sound patches yet. demsg is filling up with these messages for sure.
I just tried Linux 5.7-rc4 and it also has this problem. New in rc4 as far as I can tell.
thanks, -- Shuah
On Tue, 05 May 2020 17:30:07 +0200, shuah wrote:
On 5/5/20 9:25 AM, shuah wrote:
On 5/4/20 11:57 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.6.11 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 06 May 2020 16:52:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.11-rc1....
or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y and the diffstat can be found below.
thanks,
greg k-h
Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.6.11-rc1
Takashi Iwai tiwai@suse.de ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
Vasily Khoruzhick anarsoul@gmail.com ALSA: line6: Fix POD HD500 audio playback
Wu Bo wubo40@huawei.com ALSA: hda/hdmi: fix without unlocked before return
Takashi Iwai tiwai@suse.de ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
Hui Wang hui.wang@canonical.com ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
sound/core/oss/pcm_plugin.c | 20 ++++--- sound/isa/opti9xx/miro.c | 9 ++- sound/isa/opti9xx/opti92x-ad1848.c | 9 ++- sound/pci/hda/patch_hdmi.c | 4 +- sound/pci/hda/patch_realtek.c | 1 + sound/usb/line6/podhd.c | 22 ++----- sound/usb/quirks.c | 2 +- 78 files changed, 554 insertions(+), 297 deletions(-)
Compiled and booted on my test system. Tons of the of following errors in dmesg
Adding Takashi Iwai
[ 33.980302] usb 2-2.4: 1:1: cannot set freq 48000 to ep 0x1 [ 49.340581] usb 2-2.4: 2:1: cannot set freq 48000 to ep 0x82 [ 59.580511] usb 2-2.4: 13:0: cannot get min/max values for control 2 (id 13) [ 64.700532] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 69.792257] usb 2-2.4: 10:0: cannot get min/max values for control 2 (id 10) [ 69.792736] usbcore: registered new interface driver snd-usb-audio [ 74.871038] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 79.967099] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 85.076961] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 90.191415] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 95.308843] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9)
followed by
[ 131.172280] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 136.259909] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 141.380345] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 146.500227] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 151.620227] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 156.739899] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 161.859999] usb 2-2.4: 1:1: usb_set_interface failed (-110)
I have audio on that port. I haven't tried yet reverting these sound patches yet. demsg is filling up with these messages for sure.
I just tried Linux 5.7-rc4 and it also has this problem. New in rc4 as far as I can tell.
Then it's unlikely from the changes in sound/*, but I'd suspect rather USB core side. There is only one change for USB-audio driver and it's a correction of USB device ID.
thanks,
Takashi
On 5/5/20 9:36 AM, Takashi Iwai wrote:
On Tue, 05 May 2020 17:30:07 +0200, shuah wrote:
On 5/5/20 9:25 AM, shuah wrote:
On 5/4/20 11:57 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.6.11 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 06 May 2020 16:52:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.11-rc1....
or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y and the diffstat can be found below.
thanks,
greg k-h
Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.6.11-rc1
Takashi Iwai tiwai@suse.de ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
Vasily Khoruzhick anarsoul@gmail.com ALSA: line6: Fix POD HD500 audio playback
Wu Bo wubo40@huawei.com ALSA: hda/hdmi: fix without unlocked before return
Takashi Iwai tiwai@suse.de ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
Hui Wang hui.wang@canonical.com ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
sound/core/oss/pcm_plugin.c | 20 ++++--- sound/isa/opti9xx/miro.c | 9 ++- sound/isa/opti9xx/opti92x-ad1848.c | 9 ++- sound/pci/hda/patch_hdmi.c | 4 +- sound/pci/hda/patch_realtek.c | 1 + sound/usb/line6/podhd.c | 22 ++----- sound/usb/quirks.c | 2 +- 78 files changed, 554 insertions(+), 297 deletions(-)
Compiled and booted on my test system. Tons of the of following errors in dmesg
Adding Takashi Iwai
[ 33.980302] usb 2-2.4: 1:1: cannot set freq 48000 to ep 0x1 [ 49.340581] usb 2-2.4: 2:1: cannot set freq 48000 to ep 0x82 [ 59.580511] usb 2-2.4: 13:0: cannot get min/max values for control 2 (id 13) [ 64.700532] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 69.792257] usb 2-2.4: 10:0: cannot get min/max values for control 2 (id 10) [ 69.792736] usbcore: registered new interface driver snd-usb-audio [ 74.871038] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 79.967099] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 85.076961] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 90.191415] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 95.308843] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9)
followed by
[ 131.172280] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 136.259909] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 141.380345] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 146.500227] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 151.620227] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 156.739899] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 161.859999] usb 2-2.4: 1:1: usb_set_interface failed (-110)
I have audio on that port. I haven't tried yet reverting these sound patches yet. demsg is filling up with these messages for sure.
I just tried Linux 5.7-rc4 and it also has this problem. New in rc4 as far as I can tell.
Then it's unlikely from the changes in sound/*, but I'd suspect rather USB core side. There is only one change for USB-audio driver and it's a correction of USB device ID.
For what its worth not seeing this on 5.4.39-rc1 with the same set of sound changes. I will start bisect on 5.6.11-rc1
thanks, -- Shuah
On 5/5/20 9:43 AM, shuah wrote:
On 5/5/20 9:36 AM, Takashi Iwai wrote:
On Tue, 05 May 2020 17:30:07 +0200, shuah wrote:
On 5/5/20 9:25 AM, shuah wrote:
On 5/4/20 11:57 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.6.11 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 06 May 2020 16:52:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.11-rc1....
or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
linux-5.6.y and the diffstat can be found below.
thanks,
greg k-h
Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.6.11-rc1
Takashi Iwai tiwai@suse.de ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
Vasily Khoruzhick anarsoul@gmail.com ALSA: line6: Fix POD HD500 audio playback
Wu Bo wubo40@huawei.com ALSA: hda/hdmi: fix without unlocked before return
Takashi Iwai tiwai@suse.de ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
Hui Wang hui.wang@canonical.com ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
sound/core/oss/pcm_plugin.c | 20 ++++--- sound/isa/opti9xx/miro.c | 9 ++- sound/isa/opti9xx/opti92x-ad1848.c | 9 ++- sound/pci/hda/patch_hdmi.c | 4 +- sound/pci/hda/patch_realtek.c | 1 + sound/usb/line6/podhd.c | 22 ++----- sound/usb/quirks.c | 2 +- 78 files changed, 554 insertions(+), 297 deletions(-)
Compiled and booted on my test system. Tons of the of following errors in dmesg
Adding Takashi Iwai
[ 33.980302] usb 2-2.4: 1:1: cannot set freq 48000 to ep 0x1 [ 49.340581] usb 2-2.4: 2:1: cannot set freq 48000 to ep 0x82 [ 59.580511] usb 2-2.4: 13:0: cannot get min/max values for control 2 (id 13) [ 64.700532] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 69.792257] usb 2-2.4: 10:0: cannot get min/max values for control 2 (id 10) [ 69.792736] usbcore: registered new interface driver snd-usb-audio [ 74.871038] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 79.967099] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 85.076961] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 90.191415] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 95.308843] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9)
followed by
[ 131.172280] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 136.259909] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 141.380345] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 146.500227] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 151.620227] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 156.739899] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 161.859999] usb 2-2.4: 1:1: usb_set_interface failed (-110)
I have audio on that port. I haven't tried yet reverting these sound patches yet. demsg is filling up with these messages for sure.
I just tried Linux 5.7-rc4 and it also has this problem. New in rc4 as far as I can tell.
Then it's unlikely from the changes in sound/*, but I'd suspect rather USB core side. There is only one change for USB-audio driver and it's a correction of USB device ID.
For what its worth not seeing this on 5.4.39-rc1 with the same set of sound changes. I will start bisect on 5.6.11-rc1
I can't reproduce this problem on 5.7-rc1 and 5.6.11-rc1 after seeing it once on both.
Tried powerdown vs reboot to see if it is tied to hardware init sequence. Doesn't seem to make a difference. Oh well. I will update if I see it again.
thanks, -- Shuah
On Tue, May 05, 2020 at 10:19:31AM -0600, shuah wrote:
On 5/5/20 9:43 AM, shuah wrote:
On 5/5/20 9:36 AM, Takashi Iwai wrote:
On Tue, 05 May 2020 17:30:07 +0200, shuah wrote:
On 5/5/20 9:25 AM, shuah wrote:
On 5/4/20 11:57 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.6.11 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 06 May 2020 16:52:55 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.11-rc1....
or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
linux-5.6.y and the diffstat can be found below.
thanks,
greg k-h
Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.6.11-rc1
Takashi Iwai tiwai@suse.de ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
Vasily Khoruzhick anarsoul@gmail.com ALSA: line6: Fix POD HD500 audio playback
Wu Bo wubo40@huawei.com ALSA: hda/hdmi: fix without unlocked before return
Takashi Iwai tiwai@suse.de ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
Hui Wang hui.wang@canonical.com ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
sound/core/oss/pcm_plugin.c | 20 ++++--- sound/isa/opti9xx/miro.c | 9 ++- sound/isa/opti9xx/opti92x-ad1848.c | 9 ++- sound/pci/hda/patch_hdmi.c | 4 +- sound/pci/hda/patch_realtek.c | 1 + sound/usb/line6/podhd.c | 22 ++----- sound/usb/quirks.c | 2 +- 78 files changed, 554 insertions(+), 297 deletions(-)
Compiled and booted on my test system. Tons of the of following errors in dmesg
Adding Takashi Iwai
[ 33.980302] usb 2-2.4: 1:1: cannot set freq 48000 to ep 0x1 [ 49.340581] usb 2-2.4: 2:1: cannot set freq 48000 to ep 0x82 [ 59.580511] usb 2-2.4: 13:0: cannot get min/max values for control 2 (id 13) [ 64.700532] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 69.792257] usb 2-2.4: 10:0: cannot get min/max values for control 2 (id 10) [ 69.792736] usbcore: registered new interface driver snd-usb-audio [ 74.871038] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 79.967099] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 85.076961] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 90.191415] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9) [ 95.308843] usb 2-2.4: 9:0: cannot get min/max values for control 2 (id 9)
followed by
[ 131.172280] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 136.259909] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 141.380345] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 146.500227] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 151.620227] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 156.739899] usb 2-2.4: 1:1: usb_set_interface failed (-110) [ 161.859999] usb 2-2.4: 1:1: usb_set_interface failed (-110)
I have audio on that port. I haven't tried yet reverting these sound patches yet. demsg is filling up with these messages for sure.
I just tried Linux 5.7-rc4 and it also has this problem. New in rc4 as far as I can tell.
Then it's unlikely from the changes in sound/*, but I'd suspect rather USB core side. There is only one change for USB-audio driver and it's a correction of USB device ID.
For what its worth not seeing this on 5.4.39-rc1 with the same set of sound changes. I will start bisect on 5.6.11-rc1
I can't reproduce this problem on 5.7-rc1 and 5.6.11-rc1 after seeing it once on both.
Tried powerdown vs reboot to see if it is tied to hardware init sequence. Doesn't seem to make a difference. Oh well. I will update if I see it again.
Thanks for the report, and for testing all of these. Looks like your USB device got "stuck" in an odd state, if it shows up again, please let us know on linux-usb@vger.
thanks,
greg k-h
On 5/4/20 10:57 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.6.11 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 06 May 2020 16:52:55 +0000. Anything received after that time might be too late.
Build results: total: 155 pass: 155 fail: 0 Qemu test results: total: 427 pass: 427 fail: 0
Guenter
On Tue, May 05, 2020 at 08:45:59AM -0700, Guenter Roeck wrote:
On 5/4/20 10:57 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.6.11 release. There are 73 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 06 May 2020 16:52:55 +0000. Anything received after that time might be too late.
Build results: total: 155 pass: 155 fail: 0 Qemu test results: total: 427 pass: 427 fail: 0
Thanks for testing all of these and letting me know.
greg k-h
-
Greg Kroah-Hartman -
Guenter Roeck -
Jon Hunter -
Naresh Kamboju -
shuah -
Takashi Iwai