This is the start of the stable review cycle for the 5.4.153 release. There are 52 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 14 Oct 2021 06:44:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.153-rc2... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.4.153-rc2
Lukas Bulwahn lukas.bulwahn@gmail.com x86/Kconfig: Correct reference to MWINCHIP3D
Thomas Gleixner tglx@linutronix.de x86/hpet: Use another crystalball to evaluate HPET usability
Lukas Bulwahn lukas.bulwahn@gmail.com x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI
Naveen N. Rao naveen.n.rao@linux.vnet.ibm.com powerpc/bpf: Fix BPF_MOD when imm == 1
Palmer Dabbelt palmerdabbelt@google.com RISC-V: Include clone3() on rv32
Tiezhu Yang yangtiezhu@loongson.cn bpf, s390: Fix potential memory leak about jit_data
Jamie Iles quic_jiles@quicinc.com i2c: acpi: fix resource leak in reconfiguration device addition
Mike Manning mvrmanning@gmail.com net: prefer socket bound to interface when not in VRF
Sylwester Dziedziuch sylwesterx.dziedziuch@intel.com i40e: Fix freeing of uninitialized misc IRQ vector
Jiri Benc jbenc@redhat.com i40e: fix endless loop under rtnl
Eric Dumazet edumazet@google.com gve: fix gve_get_stats()
Eric Dumazet edumazet@google.com rtnetlink: fix if_nlmsg_stats_size() under estimation
Catherine Sullivan csully@google.com gve: Correct available tx qpl check
Yang Yingliang yangyingliang@huawei.com drm/nouveau/debugfs: fix file release memory leak
Mark Brown broonie@kernel.org video: fbdev: gbefb: Only instantiate device when built for IP32
Tony Lindgren tony@atomide.com bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
Eric Dumazet edumazet@google.com netlink: annotate data races around nlk->bound
Sean Anderson sean.anderson@seco.com net: sfp: Fix typo in state machine debug string
Eric Dumazet edumazet@google.com net/sched: sch_taprio: properly cancel timer from taprio_destroy()
Eric Dumazet edumazet@google.com net: bridge: use nla_total_size_64bit() in br_get_linkxstats_size()
Oleksij Rempel linux@rempel-privat.de ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
Michael Walle michael@walle.cc arm64: dts: ls1028a: add missing CAN nodes
Andre Przywara andre.przywara@arm.com arm64: dts: freescale: Fix SP805 clock-names
Andy Shevchenko andriy.shevchenko@linux.intel.com ptp_pch: Load module automatically if ID matches
Pali Rohár pali@kernel.org powerpc/fsl/dts: Fix phy-connection-type for fm1mac3
Eric Dumazet edumazet@google.com net_sched: fix NULL deref in fifo_set_limit()
Pavel Skripkin paskripkin@gmail.com phy: mdio: fix memory leak
Tatsuhiko Yasumatsu th.yasumatsu@gmail.com bpf: Fix integer overflow in prealloc_elems_and_freelist()
Johan Almbladh johan.almbladh@anyfinetworks.com bpf, arm: Fix register clobbering in div/mod implementation
Max Filippov jcmvbkbc@gmail.com xtensa: call irqchip_init only when CONFIG_USE_OF is selected
Randy Dunlap rdunlap@infradead.org xtensa: use CONFIG_USE_OF instead of CONFIG_OF
Max Filippov jcmvbkbc@gmail.com xtensa: move XCHAL_KIO_* definitions to kmem_layout.h
Dmitry Baryshkov dmitry.baryshkov@linaro.org arm64: dts: qcom: pm8150: use qcom,pm8998-pon binding
Marek Vasut marex@denx.de ARM: dts: imx: Fix USB host power regulator polarity on M53Menlo
Marek Vasut marex@denx.de ARM: dts: imx: Add missing pinctrl-names for panel on M53Menlo
Shawn Guo shawn.guo@linaro.org soc: qcom: mdt_loader: Drop PT_LOAD check on hash segment
Marijn Suijten marijn.suijten@somainline.org ARM: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL reference
Antonio Martorana amartora@codeaurora.org soc: qcom: socinfo: Fixed argument passed to platform_set_data()
Piotr Krysiuk piotras@gmail.com bpf, mips: Validate conditional branch offsets
Paul Burton paulburton@kernel.org MIPS: BPF: Restore MIPS32 cBPF JIT
David Heidelberg david@ixit.cz ARM: dts: qcom: apq8064: use compatible which contains chipid
Roger Quadros rogerq@kernel.org ARM: dts: omap3430-sdp: Fix NAND device node
Juergen Gross jgross@suse.com xen/balloon: fix cancelled balloon action
Trond Myklebust trond.myklebust@hammerspace.com nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero
Patrick Ho Patrick.Ho@netapp.com nfsd: fix error handling of register_pernet_subsys() in init_nfsd()
Zheng Liang zhengliang6@huawei.com ovl: fix missing negative dentry check in ovl_rename()
Neil Armstrong narmstrong@baylibre.com mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk
Jan Beulich jbeulich@suse.com xen/privcmd: fix error handling in mmap-resource processing
Xu Yang xu.yang_2@nxp.com usb: typec: tcpm: handle SRC_STARTUP state if cc changes
Johan Hovold johan@kernel.org USB: cdc-acm: fix break reporting
Johan Hovold johan@kernel.org USB: cdc-acm: fix racy tty buffer accesses
Ben Hutchings ben@decadent.org.uk Partially revert "usb: Kconfig: using select for USB_COMMON dependency"
-------------
Diffstat:
Makefile | 4 +- arch/arm/boot/dts/imx53-m53menlo.dts | 4 +- arch/arm/boot/dts/omap3430-sdp.dts | 2 +- arch/arm/boot/dts/qcom-apq8064.dtsi | 7 +- arch/arm/mach-imx/pm-imx6.c | 2 + arch/arm/mach-omap2/omap_hwmod.c | 2 + arch/arm/net/bpf_jit_32.c | 19 + arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 22 +- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 16 +- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 16 +- arch/arm64/boot/dts/qcom/pm8150.dtsi | 2 +- arch/mips/Kconfig | 1 + arch/mips/net/Makefile | 1 + arch/mips/net/bpf_jit.c | 1299 ++++++++++++++++++++++++ arch/mips/net/bpf_jit_asm.S | 285 ++++++ arch/powerpc/boot/dts/fsl/t1023rdb.dts | 2 +- arch/powerpc/net/bpf_jit_comp64.c | 10 +- arch/riscv/include/uapi/asm/unistd.h | 3 +- arch/s390/net/bpf_jit_comp.c | 2 +- arch/x86/Kconfig | 2 +- arch/x86/kernel/early-quirks.c | 6 - arch/x86/kernel/hpet.c | 81 ++ arch/x86/platform/olpc/olpc.c | 2 +- arch/xtensa/include/asm/kmem_layout.h | 29 + arch/xtensa/include/asm/vectors.h | 42 +- arch/xtensa/kernel/irq.c | 2 +- arch/xtensa/kernel/setup.c | 12 +- arch/xtensa/mm/mmu.c | 2 +- drivers/bus/ti-sysc.c | 3 + drivers/gpu/drm/nouveau/nouveau_debugfs.c | 1 + drivers/i2c/i2c-core-acpi.c | 1 + drivers/mmc/host/meson-gx-mmc.c | 73 +- drivers/net/ethernet/google/gve/gve.h | 2 +- drivers/net/ethernet/google/gve/gve_main.c | 13 +- drivers/net/ethernet/intel/i40e/i40e_main.c | 5 +- drivers/net/phy/mdio_bus.c | 7 + drivers/net/phy/sfp.c | 2 +- drivers/ptp/ptp_pch.c | 1 + drivers/soc/qcom/mdt_loader.c | 2 +- drivers/soc/qcom/socinfo.c | 2 +- drivers/usb/class/cdc-acm.c | 8 + drivers/usb/common/Kconfig | 3 +- drivers/usb/typec/tcpm/tcpm.c | 1 + drivers/video/fbdev/gbefb.c | 2 +- drivers/xen/balloon.c | 21 +- drivers/xen/privcmd.c | 7 +- fs/nfsd/nfs4xdr.c | 19 +- fs/nfsd/nfsctl.c | 2 +- fs/overlayfs/dir.c | 10 +- kernel/bpf/stackmap.c | 3 +- net/bridge/br_netlink.c | 2 +- net/core/rtnetlink.c | 2 +- net/ipv4/inet_hashtables.c | 4 +- net/ipv4/udp.c | 3 +- net/ipv6/inet6_hashtables.c | 2 +- net/ipv6/udp.c | 3 +- net/netlink/af_netlink.c | 14 +- net/sched/sch_fifo.c | 3 + net/sched/sch_taprio.c | 4 + 59 files changed, 1955 insertions(+), 147 deletions(-)
On Tue, 12 Oct 2021 at 12:16, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.4.153 release. There are 52 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 14 Oct 2021 06:44:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.153-rc2... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y and the diffstat can be found below.
thanks,
greg k-h
stable rc 5.4.153-rc2 Powerpc build failed.
In file included from arch/powerpc/net/bpf_jit64.h:11, from arch/powerpc/net/bpf_jit_comp64.c:19: arch/powerpc/net/bpf_jit_comp64.c: In function 'bpf_jit_build_body': arch/powerpc/net/bpf_jit.h:32:9: error: expected expression before 'do' 32 | do { if (d) { (d)[idx] = instr; } idx++; } while (0) | ^~ arch/powerpc/net/bpf_jit.h:33:33: note: in expansion of macro 'PLANT_INSTR' 33 | #define EMIT(instr) PLANT_INSTR(image, ctx->idx, instr) | ^~~~~~~~~~~ arch/powerpc/net/bpf_jit_comp64.c:415:41: note: in expansion of macro 'EMIT' 415 | EMIT(PPC_LI(dst_reg, 0)); | ^~~~ arch/powerpc/net/bpf_jit.h:33:33: note: in expansion of macro 'PLANT_INSTR' 33 | #define EMIT(instr) PLANT_INSTR(image, ctx->idx, instr) | ^~~~~~~~~~~ arch/powerpc/net/bpf_jit.h:41:33: note: in expansion of macro 'EMIT' 41 | #define PPC_ADDI(d, a, i) EMIT(PPC_INST_ADDI | ___PPC_RT(d) | \ | ^~~~ arch/powerpc/net/bpf_jit.h:44:33: note: in expansion of macro 'PPC_ADDI' 44 | #define PPC_LI(r, i) PPC_ADDI(r, 0, i) | ^~~~~~~~ arch/powerpc/net/bpf_jit_comp64.c:415:46: note: in expansion of macro 'PPC_LI' 415 | EMIT(PPC_LI(dst_reg, 0)); | ^~~~~~ make[3]: *** [scripts/Makefile.build:262: arch/powerpc/net/bpf_jit_comp64.o] Error 1 make[3]: Target '__build' not remade because of errors.
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
On Tue, Oct 12, 2021 at 01:04:54PM +0530, Naresh Kamboju wrote:
On Tue, 12 Oct 2021 at 12:16, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.4.153 release. There are 52 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 14 Oct 2021 06:44:25 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.153-rc2... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y and the diffstat can be found below.
thanks,
greg k-h
stable rc 5.4.153-rc2 Powerpc build failed.
In file included from arch/powerpc/net/bpf_jit64.h:11, from arch/powerpc/net/bpf_jit_comp64.c:19: arch/powerpc/net/bpf_jit_comp64.c: In function 'bpf_jit_build_body': arch/powerpc/net/bpf_jit.h:32:9: error: expected expression before 'do' 32 | do { if (d) { (d)[idx] = instr; } idx++; } while (0) | ^~ arch/powerpc/net/bpf_jit.h:33:33: note: in expansion of macro 'PLANT_INSTR' 33 | #define EMIT(instr) PLANT_INSTR(image, ctx->idx, instr) | ^~~~~~~~~~~ arch/powerpc/net/bpf_jit_comp64.c:415:41: note: in expansion of macro 'EMIT' 415 | EMIT(PPC_LI(dst_reg, 0)); | ^~~~ arch/powerpc/net/bpf_jit.h:33:33: note: in expansion of macro 'PLANT_INSTR' 33 | #define EMIT(instr) PLANT_INSTR(image, ctx->idx, instr) | ^~~~~~~~~~~ arch/powerpc/net/bpf_jit.h:41:33: note: in expansion of macro 'EMIT' 41 | #define PPC_ADDI(d, a, i) EMIT(PPC_INST_ADDI | ___PPC_RT(d) | \ | ^~~~ arch/powerpc/net/bpf_jit.h:44:33: note: in expansion of macro 'PPC_ADDI' 44 | #define PPC_LI(r, i) PPC_ADDI(r, 0, i) | ^~~~~~~~ arch/powerpc/net/bpf_jit_comp64.c:415:46: note: in expansion of macro 'PPC_LI' 415 | EMIT(PPC_LI(dst_reg, 0)); | ^~~~~~ make[3]: *** [scripts/Makefile.build:262: arch/powerpc/net/bpf_jit_comp64.o] Error 1 make[3]: Target '__build' not remade because of errors.
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
Ok, I'm just going to go delete this patch from the queue now...
Thanks for the quick report.
greg k-h
-
Greg Kroah-Hartman -
Naresh Kamboju