Have other people been able to reproduce the build failure I am getting on the first build from a clean checkout? If so, and if these patches fix that, I think that they should go in. I didn't realize that the freeze was today... I have not had a chance to test Yi's patches, so I don't know if they fix the problem I am having or not. I don't know how to get into the state where I was unable to build at all, as that seems to have been caused by the EDK2 build system not rebuilding dependencies properly, and not cleaning up properly either, so I can't test whether the patches would fix the original problem.
Roy
On Thu, Nov 21, 2013 at 12:11 PM, Steven Kinney steven.kinney@linaro.org wrote:
Hi Anmar,
I am pulling the 2013.11 release tag, we are havingtrouble with ACPI. I can include any patches Roy needs to have inserted.
Cheers,
Steve
On 21 November 2013 14:07, Steven Kinney steven.kinney@linaro.org wrote:
Hi Anmar,
I just froze the table and pushed the release. Icould do an update, but finished with Ryan's patches and went to work updating. If I can re-release, I will do so.
-Steve
On 21 November 2013 13:47, Anmar Oueja anmar.oueja@linaro.org wrote:
Hello Steven,
I had a chat with Roy and we feel we should add the two liner patch below. Are you going to be able to squeeze it in or did you freeze the table already?
anmar
On 20 November 2013 19:43, Yi Li yi.li@linaro.org wrote:
Hi Roy, Steve,
If you want to build ACPI into UEFI, please make sure you haveadded the patch for that.
https://git.linaro.org/gitweb?p=arm/uefi/uefi-next.git%3Ba=blobdiff%3Bf=Base...
I have met the same issue with you before. thanks!Yi
On Thursday, November 21, 2013 08:21 AM, Roy Franz wrote:
So now that I've built it, I can't boot to the shell.......
On Wed, Nov 20, 2013 at 4:15 PM, Steven Kinney steven.kinney@linaro.org wrote:
Hi Guys,
I am running test builds right now; I also use build.sh.
Steve
On Nov 20, 2013 3:56 PM, "Ryan Harkin" ryan.harkin@linaro.org wrote: > > > > > On 20 November 2013 20:36, Roy Franz roy.franz@linaro.org wrote: >> >> resending to right list address... >> >> On Wed, Nov 20, 2013 at 12:35 PM, Roy Franz roy.franz@linaro.org >> wrote: >>> >>> Hi Steven, >>> >>> I'm getting the following failure when building for V7 VExpress >>> RTSM. This failure starts in rev >>> e0cec187231a1bf8fc12caa0c4f734771cf6fe42, which is the merge of >>> the >>> ACPI topic branch. >>> > > That's curious. I hadn't built the RTSMs for a while, so I just > built > it > and it's fine for me. > >>> Do I need to change something in my build environment in order to >>> support ACPI? >>> >>> Thanks, >>> Roy >>> >>> >>> >>> "arm-linux-gnueabihf-ld" -o > > > Hmmm, I'm using "arm-linux-gnueabi-", eg: > > CROSS_COMPILE=arm-linux-gnueabi- build -a ARM ... > > I build via uefi-build.sh, so don't normally thing about it. > > > >>> >>> >>> /home/rfranz/cavium/linaro/trees/uefi-next/Build/ArmVExpress-RTSM-A15/RELEASE_ARMLINUXGCC/ARM/ArmPkg/Drivers/AcpiTables/rtsm_ve-v7/AcpiTables/OUTPUT/./Oem0.dll >>> -nostdlib --pie --entry _ReferenceAcpiTable >>> >>> >>> >>> /home/rfranz/cavium/linaro/trees/uefi-next/Build/ArmVExpress-RTSM-A15/RELEASE_ARMLINUXGCC/ARM/ArmPkg/Drivers/AcpiTables/rtsm_ve-v7/AcpiTables/OUTPUT/./Oem0.obj >>> arm-linux-gnueabihf-ld: warning: cannot find entry symbol >>> _ReferenceAcpiTable; defaulting to 00000228 >>> "GenFw" -o >>> >>> >>> /home/rfranz/cavium/linaro/trees/uefi-next/Build/ArmVExpress-RTSM-A15/RELEASE_ARMLINUXGCC/ARM/ArmPkg/Drivers/AcpiTables/rtsm_ve-v7/AcpiTables/OUTPUT/./Oem0.acpi >>> -c >>> >>> >>> /home/rfranz/cavium/linaro/trees/uefi-next/Build/ArmVExpress-RTSM-A15/RELEASE_ARMLINUXGCC/ARM/ArmPkg/Drivers/AcpiTables/rtsm_ve-v7/AcpiTables/OUTPUT/./Oem0.dll >>> GenFw: ERROR 3000: Invalid >>> >>> >>> >>> /home/rfranz/cavium/linaro/trees/uefi-next/Build/ArmVExpress-RTSM-A15/RELEASE_ARMLINUXGCC/ARM/ArmPkg/Drivers/AcpiTables/rtsm_ve-v7/AcpiTables/OUTPUT/./Oem0.dll >>> bad ARM dynamic relocations, unkown type 23. >>> make: *** >>> >>> >>> [/home/rfranz/cavium/linaro/trees/uefi-next/Build/ArmVExpress-RTSM-A15/RELEASE_ARMLINUXGCC/ARM/ArmPkg/Drivers/AcpiTables/rtsm_ve-v7/AcpiTables/OUTPUT/Oem0.acpi] >>> Error 2 >>> >>> >>> build.py... >>> : error 7000: Failed to execute command >>> make --no-print-directory tbuild >>> >>> >>> >>> [/home/rfranz/cavium/linaro/trees/uefi-next/Build/ArmVExpress-RTSM-A15/RELEASE_ARMLINUXGCC/ARM/ArmPkg/Drivers/AcpiTables/rtsm_ve-v7/AcpiTables] >> >> _______________________________________________ >> Linaro-uefi mailing list >> Linaro-uefi@lists.linaro.org >> http://lists.linaro.org/mailman/listinfo/linaro-uefi > >
Linaro-uefi mailing list Linaro-uefi@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-uefi
Linaro-uefi mailing list Linaro-uefi@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-uefi
Linaro-uefi mailing list Linaro-uefi@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-uefi