-----Original Message----- From: graeme.gregory@linaro.org [mailto:graeme.gregory@linaro.org] Sent: Wednesday, November 16, 2016 10:40 AM To: Heyi Guo Cc: linaro-uefi@lists.linaro.org; leif.lindholm@linaro.org; ard.biesheuvel@linaro.org; Salil Mehta Subject: Re: [PATCH 11/28] D03/ACPI: Add RoCE device to ACPI & IORT Tables
On Mon, Nov 14, 2016 at 07:29:38PM +0800, Heyi Guo wrote:
This patch adds the support of RoCE to the DSDT and IORT ACPI Tables. Following are the changes:
- adds the support of a RoCE device to the HNS DSDT file. RoCE DEVICE node properties added are:
- eth-handle
- dsaf-handle
- interrupt-parent
- interrupt-names
- Interrupt node
- Addition of MbiGen RoCE "named-component" node in the IORT Table.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Salil Mehta salil.mehta@huawei.com
.../Hisilicon/Hi1610/Hi1610AcpiTables/D03Iort.asl | 33
++++++++++++-
.../Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl | 56
+++++++++++++++++++++-
.../Hi1610/Hi1610AcpiTables/Dsdt/D03Mbig.asl | 23 ++++++++- 3 files changed, 109 insertions(+), 3 deletions(-)
diff --git a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/D03Iort.asl
b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/D03Iort.asl
index e02b4d5..db98305 100644 --- a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/D03Iort.asl +++ b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/D03Iort.asl @@ -7,7 +7,7 @@
- Format: [ByteLength] FieldName : HexFieldValue
*/ [0004] Signature : "IORT" [IO Remapping
Table]
-[0004] Table Length : 0000029e +[0004] Table Length : 000002e4 [0001] Revision : 00 [0001] Checksum : BC [0006] Oem ID : "HISI " @@ -249,6 +249,37 @@ [0004] Flags (decoded below) : 00000000 Single Mapping : 1
+/* mbi-gen mbi7 - RoCE named component */ +[0001] Type : 01 +[0002] Length : 0046 +[0001] Revision : 00 +[0004] Reserved : 00000000 +[0004] Mapping Count : 00000001 +[0004] Mapping Offset : 00000032
+[0004] Node Flags : 00000000 +[0008] Memory Properties : [IORT Memory Access
Properties]
+[0004] Cache Coherency : 00000000 +[0001] Hints (decoded below) : 00
Transient : 0Write Allocate : 0Read Allocate : 0Override : 0+[0002] Reserved : 0000 +[0001] Memory Flags (decoded below) : 00
Coherency : 0Device Attribute : 0+[0001] Memory Size Limit : 00 +[0016] Device Name : "_SB_.MBI7" +[0004] Padding : 00 00 00 00
+[0004] Input base : 00000000 +[0004] ID Count : 00000001 +[0004] Output Base : 00040b1e +[0004] Output Reference : 00000034 +[0004] Flags (decoded below) : 00000000
Single Mapping : 1/* RC 0 */ [0001] Type : 02 [0002] Length : 0034 diff --git a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl
b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl
index 9a7fdb0..83cea5e 100644 --- a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl +++ b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl @@ -558,5 +558,59 @@ Scope(_SB) } }) }
- Device (ROCE) {
- Name(_HID, "HISI00D1")
- Name (_CCA, 1) // Cache-coherent controller
- Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),Package () {Package () {"eth-handle", Package () {\_SB.ETH0, \_SB.ETH1,0, 0, _SB.ETH4, _SB.ETH5}},
Package () {"dsaf-handle", Package (){\_SB.DSF0}},Package () {"interrupt-parent", Package() {\_SB.MBI7}},Package () {"interrupt-names", Package() {"hns-roce-comp-0","hns-roce-comp-1","hns-roce-comp-2","hns-roce-comp-3","hns-roce-comp-4","hns-roce-comp-5","hns-roce-comp-6","hns-roce-comp-7","hns-roce-comp-8","hns-roce-comp-9","hns-roce-comp-10",
"hns-roce-comp-11",
"hns-roce-comp-12",
"hns-roce-comp-13",
"hns-roce-comp-14",
"hns-roce-comp-15",
"hns-roce-comp-16",
"hns-roce-comp-17",
"hns-roce-comp-18",
"hns-roce-comp-19",
"hns-roce-comp-20",
"hns-roce-comp-21",
"hns-roce-comp-22",
"hns-roce-comp-23",
"hns-roce-comp-24",
"hns-roce-comp-25",
"hns-roce-comp-26",
"hns-roce-comp-27",
"hns-roce-comp-28",
"hns-roce-comp-29",
"hns-roce-comp-30",
"hns-roce-comp-31",
"hns-roce-async","hns-roce-common"}},
Same comment as D05 version, interrupt-parent is wrong here as its already given in _CRS and interrupt-names should not be needed as its a DT concept.
Graeme
Thanks for your comments. 1. Ok. Will remove below code leg Package () {"interrupt-parent", Package() {_SB.MBI7}}, 2. We use these interrupt-names string while requesting an interrupt using request_irq(). Makes /proc/interrupt output more readable.
Best regards Salil
}- })
- Name (_CRS, ResourceTemplate (){
Memory32Fixed (ReadWrite, 0xc4000000 , 0x100000)Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive, 0,"\_SB.MBI7")
{722, 723, 724, 725, 726, 727, 728, 729, 730, 731, 732,733,
734, 735, 736, 737, 738, 739, 740, 741, 742, 743, 744,745,
746, 747, 748, 749, 750, 751, 752, 753, 785, 754,}- })
- }
} diff --git a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Mbig.asl
b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Mbig.asl
index 5456bd8..afd6b47 100644 --- a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Mbig.asl +++ b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Mbig.asl @@ -280,5 +280,26 @@ Name(_PRS, ResourceTemplate() { } }) }
- Device(MBI7) { // Mbi-gen roce intc
- Name(_HID, "HISI0152")
- Name(_CID, "MBIGen")
- Name(_CRS, ResourceTemplate() {
Memory32Fixed(ReadWrite, 0xc0080000, 0x10000)- })
- Name (_PRS, ResourceTemplate (){
Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive,,,){722, 723, 724, 725, 726, 727, 728, 729, 730, 731, 732,733,
734, 735, 736, 737, 738, 739, 740, 741, 742, 743, 744,745,
746, 747, 748, 749, 750, 751, 752, 753, 785, 754,}- })
- Name(_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),Package (){Package () {"num-pins", 34}}- })
- }
}
1.9.1