Use the TTYTERM console type by default so that we understand control codes sent by Linux terminals.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ryan Harkin ryan.harkin@linaro.org --- Platforms/ARM/VExpress/ArmVExpress-FVP-AArch64.dsc | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/Platforms/ARM/VExpress/ArmVExpress-FVP-AArch64.dsc b/Platforms/ARM/VExpress/ArmVExpress-FVP-AArch64.dsc index ab60609..b2a1f64 100644 --- a/Platforms/ARM/VExpress/ArmVExpress-FVP-AArch64.dsc +++ b/Platforms/ARM/VExpress/ArmVExpress-FVP-AArch64.dsc @@ -137,7 +137,7 @@
## PL011 - Serial Terminal gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x1c090000 - gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|38400 + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
## PL031 RealTimeClock gArmPlatformTokenSpaceGuid.PcdPL031RtcBase|0x1C170000 @@ -172,11 +172,11 @@
# Use the serial console (ConIn & ConOut) and the Graphic driver (ConOut) !ifdef EDK2_ENABLE_PL111 - gArmPlatformTokenSpaceGuid.PcdDefaultConOutPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(38400,8,N,1)/VenPcAnsi();VenHw(407B4008-BF5B-11DF-9547-CF16E0D72085)" + gArmPlatformTokenSpaceGuid.PcdDefaultConOutPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenMsg(7D916D80-5BB1-458C-A48F-E25FDD51EF94);VenHw(407B4008-BF5B-11DF-9547-CF16E0D72085)" !else - gArmPlatformTokenSpaceGuid.PcdDefaultConOutPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(38400,8,N,1)/VenPcAnsi();" + gArmPlatformTokenSpaceGuid.PcdDefaultConOutPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenMsg(7D916D80-5BB1-458C-A48F-E25FDD51EF94)" !endif - gArmPlatformTokenSpaceGuid.PcdDefaultConInPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(38400,8,N,1)/VenPcAnsi()" + gArmPlatformTokenSpaceGuid.PcdDefaultConInPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenMsg(7D916D80-5BB1-458C-A48F-E25FDD51EF94)"
# # ARM Architectural Timer Frequency