Re: [Linaro-uefi] [PATCH edk2-platforms v1 09/13] Hisilicon: add PciCpuIo2Dxe

20 Jul 2018

(reply to correct version of the patch - apologies for the spam if you
got this twice)
On 20 July 2018 at 17:02, Ming Huang ming.huang@linaro.org wrote:
...
From: Heyi Guo heyi.guo@linaro.org
This is to prepare for switching to generic PciHostBridge, and
CpuIo2Dxe is needed by generic PciHostBridge driver.
The driver is copied from ArmPkg/Drivers/ArmPciCpuIo2Dxe and changed
for D0x.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo heyi.guo@linaro.org
Cc: Ard Biesheuvel ard.biesheuvel@linaro.org
Cc: Leif Lindholm leif.lindholm@linaro.org
Cc: Michael D Kinney michael.d.kinney@intel.com
Why do you need this driver? Can you not simply set
gArmTokenSpaceGuid.PcdPciIoTranslation to 0x0 and use
ArmPkg/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf instead?
...

Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c   | 557 ++++++++++++++++++++
 Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf |  48 ++
 2 files changed, 605 insertions(+)

diff --git a/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c
new file mode 100644
index 0000000000..8426c5935c
--- /dev/null
+++ b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c
@@ -0,0 +1,557 @@
+/** @file

Produces the CPU I/O 2 Protocol.


+Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2016 - 2018, Linaro Ltd. All rights reserved.<BR>
+Copyright (c) 2018, Hisilicon Ltd. All rights reserved.<BR>



+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution.  The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php



+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.



+**/



+#include <PiDxe.h>



+#include <Protocol/CpuIo2.h>



+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>



+// The translated IO PORT address is already a MMIO address, so we make it the
+// same as memory address for range check.
+#define MAX_IO_PORT_ADDRESS   MAX_ADDRESS



+//
+// Lookup table for increment values based on transfer widths
+//
+STATIC CONST UINT8 mInStride[] = {

1, // EfiCpuIoWidthUint8
2, // EfiCpuIoWidthUint16
4, // EfiCpuIoWidthUint32
8, // EfiCpuIoWidthUint64
0, // EfiCpuIoWidthFifoUint8
0, // EfiCpuIoWidthFifoUint16
0, // EfiCpuIoWidthFifoUint32
0, // EfiCpuIoWidthFifoUint64
1, // EfiCpuIoWidthFillUint8
2, // EfiCpuIoWidthFillUint16
4, // EfiCpuIoWidthFillUint32
8  // EfiCpuIoWidthFillUint64

+};



+//
+// Lookup table for increment values based on transfer widths
+//
+STATIC CONST UINT8 mOutStride[] = {

1, // EfiCpuIoWidthUint8
2, // EfiCpuIoWidthUint16
4, // EfiCpuIoWidthUint32
8, // EfiCpuIoWidthUint64
1, // EfiCpuIoWidthFifoUint8
2, // EfiCpuIoWidthFifoUint16
4, // EfiCpuIoWidthFifoUint32
8, // EfiCpuIoWidthFifoUint64
0, // EfiCpuIoWidthFillUint8
0, // EfiCpuIoWidthFillUint16
0, // EfiCpuIoWidthFillUint32
0  // EfiCpuIoWidthFillUint64

+};



+/**

Check parameters to a CPU I/O 2 Protocol service request.

The I/O operations are carried out exactly as requested. The caller is responsible
for satisfying any alignment and I/O width restrictions that a PI System on a
platform might require. For example on some platforms, width requests of
EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
be handled by the driver.

@param[in] MmioOperation  TRUE for an MMIO operation, FALSE for I/O Port operation.
@param[in] Width          Signifies the width of the I/O or Memory operation.
@param[in] Address        The base address of the I/O operation.
@param[in] Count          The number of I/O operations to perform. The number of
                       bytes moved is Width size * Count, starting at Address.


@param[in] Buffer         For read operations, the destination buffer to store the results.
                       For write operations, the source buffer from which to write data.



@retval EFI_SUCCESS            The parameters for this request pass the checks.
@retval EFI_INVALID_PARAMETER  Width is invalid for this PI system.
@retval EFI_INVALID_PARAMETER  Buffer is NULL.
@retval EFI_UNSUPPORTED        The Buffer is not aligned for the given Width.
@retval EFI_UNSUPPORTED        The address range specified by Address, Width,
                            and Count is not valid for this PI system.




+**/
+STATIC
+EFI_STATUS
+CpuIoCheckParameter (

IN BOOLEAN                    MmioOperation,
IN EFI_CPU_IO_PROTOCOL_WIDTH  Width,
IN UINT64                     Address,
IN UINTN                      Count,
IN VOID                       *Buffer
)

+{

UINT64  MaxCount;
UINT64  Limit;

//
// Check to see if Buffer is NULL
//
if (Buffer == NULL) {
return EFI_INVALID_PARAMETER;
}

//
// Check to see if Width is in the valid range
//
if ((UINT32)Width >= EfiCpuIoWidthMaximum) {
return EFI_INVALID_PARAMETER;
}

//
// For FIFO type, the target address won't increase during the access,
// so treat Count as 1
//
if (Width >= EfiCpuIoWidthFifoUint8 && Width <= EfiCpuIoWidthFifoUint64) {
Count = 1;
}

//
// Check to see if Width is in the valid range for I/O Port operations
//
Width = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
if (!MmioOperation && (Width == EfiCpuIoWidthUint64)) {
return EFI_INVALID_PARAMETER;
}

//
// Check to see if Address is aligned
//
if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) {
return EFI_UNSUPPORTED;
}

//
// Check to see if any address associated with this transfer exceeds the maximum
// allowed address.  The maximum address implied by the parameters passed in is
// Address + Size * Count.  If the following condition is met, then the transfer
// is not supported.
//
//    Address + Size * Count > (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS) + 1
//
// Since MAX_ADDRESS can be the maximum integer value supported by the CPU and Count
// can also be the maximum integer value supported by the CPU, this range
// check must be adjusted to avoid all oveflow conditions.
//
// The following form of the range check is equivalent but assumes that
// MAX_ADDRESS and MAX_IO_PORT_ADDRESS are of the form (2^n - 1).
//
Limit = (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS);
if (Count == 0) {
if (Address > Limit) {
 return EFI_UNSUPPORTED;


}
} else {
MaxCount = RShiftU64 (Limit, Width);
if (MaxCount < (Count - 1)) {
 return EFI_UNSUPPORTED;


}
if (Address > LShiftU64 (MaxCount - Count + 1, Width)) {
 return EFI_UNSUPPORTED;


}
}

//
// Check to see if Buffer is aligned
//
if (((UINTN)Buffer & ((MIN (sizeof (UINTN), mInStride[Width])  - 1))) != 0) {
return EFI_UNSUPPORTED;
}

return EFI_SUCCESS;

+}



+/**

Reads memory-mapped registers.

The I/O operations are carried out exactly as requested. The caller is responsible
for satisfying any alignment and I/O width restrictions that a PI System on a
platform might require. For example on some platforms, width requests of
EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
be handled by the driver.

If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
each of the Count operations that is performed.

If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
incremented for each of the Count operations that is performed. The read or
write operation is performed Count times on the same Address.

If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
incremented for each of the Count operations that is performed. The read or
write operation is performed Count times from the first element of Buffer.

@param[in]  This     A pointer to the EFI_CPU_IO2_PROTOCOL instance.
@param[in]  Width    Signifies the width of the I/O or Memory operation.
@param[in]  Address  The base address of the I/O operation.
@param[in]  Count    The number of I/O operations to perform. The number of
                  bytes moved is Width size * Count, starting at Address.


@param[out] Buffer   For read operations, the destination buffer to store the results.
                  For write operations, the source buffer from which to write data.



@retval EFI_SUCCESS            The data was read from or written to the PI system.
@retval EFI_INVALID_PARAMETER  Width is invalid for this PI system.
@retval EFI_INVALID_PARAMETER  Buffer is NULL.
@retval EFI_UNSUPPORTED        The Buffer is not aligned for the given Width.
@retval EFI_UNSUPPORTED        The address range specified by Address, Width,
                            and Count is not valid for this PI system.




+**/
+STATIC
+EFI_STATUS
+EFIAPI
+CpuMemoryServiceRead (

IN  EFI_CPU_IO2_PROTOCOL       *This,
IN  EFI_CPU_IO_PROTOCOL_WIDTH  Width,
IN  UINT64                     Address,
IN  UINTN                      Count,
OUT VOID                       *Buffer
)

+{

EFI_STATUS                 Status;
UINT8                      InStride;
UINT8                      OutStride;
EFI_CPU_IO_PROTOCOL_WIDTH  OperationWidth;
UINT8                      *Uint8Buffer;

Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
if (EFI_ERROR (Status)) {
return Status;
}

//
// Select loop based on the width of the transfer
//
InStride = mInStride[Width];
OutStride = mOutStride[Width];
OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
if (OperationWidth == EfiCpuIoWidthUint8) {
 *Uint8Buffer = MmioRead8 ((UINTN)Address);


} else if (OperationWidth == EfiCpuIoWidthUint16) {
 *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);


} else if (OperationWidth == EfiCpuIoWidthUint32) {
 *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);


} else if (OperationWidth == EfiCpuIoWidthUint64) {
 *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);


}
}
return EFI_SUCCESS;

+}



+/**

Writes memory-mapped registers.

The I/O operations are carried out exactly as requested. The caller is responsible
for satisfying any alignment and I/O width restrictions that a PI System on a
platform might require. For example on some platforms, width requests of
EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
be handled by the driver.

If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
each of the Count operations that is performed.

If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
incremented for each of the Count operations that is performed. The read or
write operation is performed Count times on the same Address.

If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
incremented for each of the Count operations that is performed. The read or
write operation is performed Count times from the first element of Buffer.

@param[in]  This     A pointer to the EFI_CPU_IO2_PROTOCOL instance.
@param[in]  Width    Signifies the width of the I/O or Memory operation.
@param[in]  Address  The base address of the I/O operation.
@param[in]  Count    The number of I/O operations to perform. The number of
                  bytes moved is Width size * Count, starting at Address.


@param[in]  Buffer   For read operations, the destination buffer to store the results.
                  For write operations, the source buffer from which to write data.



@retval EFI_SUCCESS            The data was read from or written to the PI system.
@retval EFI_INVALID_PARAMETER  Width is invalid for this PI system.
@retval EFI_INVALID_PARAMETER  Buffer is NULL.
@retval EFI_UNSUPPORTED        The Buffer is not aligned for the given Width.
@retval EFI_UNSUPPORTED        The address range specified by Address, Width,
                            and Count is not valid for this PI system.




+**/
+STATIC
+EFI_STATUS
+EFIAPI
+CpuMemoryServiceWrite (

IN EFI_CPU_IO2_PROTOCOL       *This,
IN EFI_CPU_IO_PROTOCOL_WIDTH  Width,
IN UINT64                     Address,
IN UINTN                      Count,
IN VOID                       *Buffer
)

+{

EFI_STATUS                 Status;
UINT8                      InStride;
UINT8                      OutStride;
EFI_CPU_IO_PROTOCOL_WIDTH  OperationWidth;
UINT8                      *Uint8Buffer;

Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
if (EFI_ERROR (Status)) {
return Status;
}

//
// Select loop based on the width of the transfer
//
InStride = mInStride[Width];
OutStride = mOutStride[Width];
OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
if (OperationWidth == EfiCpuIoWidthUint8) {
 MmioWrite8 ((UINTN)Address, *Uint8Buffer);


} else if (OperationWidth == EfiCpuIoWidthUint16) {
 MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));


} else if (OperationWidth == EfiCpuIoWidthUint32) {
 MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));


} else if (OperationWidth == EfiCpuIoWidthUint64) {
 MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));


}
}
return EFI_SUCCESS;

+}



+/**

Reads I/O registers.

The I/O operations are carried out exactly as requested. The caller is responsible
for satisfying any alignment and I/O width restrictions that a PI System on a
platform might require. For example on some platforms, width requests of
EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
be handled by the driver.

If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
each of the Count operations that is performed.

If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
incremented for each of the Count operations that is performed. The read or
write operation is performed Count times on the same Address.

If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
incremented for each of the Count operations that is performed. The read or
write operation is performed Count times from the first element of Buffer.

@param[in]  This     A pointer to the EFI_CPU_IO2_PROTOCOL instance.
@param[in]  Width    Signifies the width of the I/O or Memory operation.
@param[in]  Address  The base address of the I/O operation.
@param[in]  Count    The number of I/O operations to perform. The number of
                  bytes moved is Width size * Count, starting at Address.


@param[out] Buffer   For read operations, the destination buffer to store the results.
                  For write operations, the source buffer from which to write data.



@retval EFI_SUCCESS            The data was read from or written to the PI system.
@retval EFI_INVALID_PARAMETER  Width is invalid for this PI system.
@retval EFI_INVALID_PARAMETER  Buffer is NULL.
@retval EFI_UNSUPPORTED        The Buffer is not aligned for the given Width.
@retval EFI_UNSUPPORTED        The address range specified by Address, Width,
                            and Count is not valid for this PI system.




+**/
+STATIC
+EFI_STATUS
+EFIAPI
+CpuIoServiceRead (

IN  EFI_CPU_IO2_PROTOCOL       *This,
IN  EFI_CPU_IO_PROTOCOL_WIDTH  Width,
IN  UINT64                     Address,
IN  UINTN                      Count,
OUT VOID                       *Buffer
)

+{

EFI_STATUS                 Status;
UINT8                      InStride;
UINT8                      OutStride;
EFI_CPU_IO_PROTOCOL_WIDTH  OperationWidth;
UINT8                      *Uint8Buffer;

Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
if (EFI_ERROR (Status)) {
return Status;
}

//
// Select loop based on the width of the transfer
//
InStride = mInStride[Width];
OutStride = mOutStride[Width];
OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);

// Assuming address has already been translated into MMIO address by PCI host
// bridge driver, so we call MmioRead/Write directly.
for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
if (OperationWidth == EfiCpuIoWidthUint8) {
 *Uint8Buffer = MmioRead8 ((UINTN)Address);


} else if (OperationWidth == EfiCpuIoWidthUint16) {
 *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);


} else if (OperationWidth == EfiCpuIoWidthUint32) {
 *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);


}
}

return EFI_SUCCESS;

+}



+/**

Write I/O registers.

The I/O operations are carried out exactly as requested. The caller is responsible
for satisfying any alignment and I/O width restrictions that a PI System on a
platform might require. For example on some platforms, width requests of
EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
be handled by the driver.

If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
each of the Count operations that is performed.

If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
incremented for each of the Count operations that is performed. The read or
write operation is performed Count times on the same Address.

If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
incremented for each of the Count operations that is performed. The read or
write operation is performed Count times from the first element of Buffer.

@param[in]  This     A pointer to the EFI_CPU_IO2_PROTOCOL instance.
@param[in]  Width    Signifies the width of the I/O or Memory operation.
@param[in]  Address  The base address of the I/O operation.
@param[in]  Count    The number of I/O operations to perform. The number of
                  bytes moved is Width size * Count, starting at Address.


@param[in]  Buffer   For read operations, the destination buffer to store the results.
                  For write operations, the source buffer from which to write data.



@retval EFI_SUCCESS            The data was read from or written to the PI system.
@retval EFI_INVALID_PARAMETER  Width is invalid for this PI system.
@retval EFI_INVALID_PARAMETER  Buffer is NULL.
@retval EFI_UNSUPPORTED        The Buffer is not aligned for the given Width.
@retval EFI_UNSUPPORTED        The address range specified by Address, Width,
                            and Count is not valid for this PI system.




+**/
+STATIC
+EFI_STATUS
+EFIAPI
+CpuIoServiceWrite (

IN EFI_CPU_IO2_PROTOCOL       *This,
IN EFI_CPU_IO_PROTOCOL_WIDTH  Width,
IN UINT64                     Address,
IN UINTN                      Count,
IN VOID                       *Buffer
)

+{

EFI_STATUS                 Status;
UINT8                      InStride;
UINT8                      OutStride;
EFI_CPU_IO_PROTOCOL_WIDTH  OperationWidth;
UINT8                      *Uint8Buffer;

//
// Make sure the parameters are valid
//
Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
if (EFI_ERROR (Status)) {
return Status;
}

//
// Select loop based on the width of the transfer
//
InStride = mInStride[Width];
OutStride = mOutStride[Width];
OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);

// Assuming address has already been translated into MMIO address by PCI host
// bridge driver, so we call MmioRead/Write directly.
for (Uint8Buffer = (UINT8 *)Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
if (OperationWidth == EfiCpuIoWidthUint8) {
 MmioWrite8 ((UINTN)Address, *Uint8Buffer);


} else if (OperationWidth == EfiCpuIoWidthUint16) {
 MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));


} else if (OperationWidth == EfiCpuIoWidthUint32) {
 MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));


}
}

return EFI_SUCCESS;

+}



+//
+// CPU I/O 2 Protocol instance
+//
+STATIC EFI_CPU_IO2_PROTOCOL mCpuIo2 = {

{
CpuMemoryServiceRead,
CpuMemoryServiceWrite
},
{
CpuIoServiceRead,
CpuIoServiceWrite
}

+};




+/**

The user Entry Point for module CpuIo2Dxe. The user code starts with this function.

@param[in] ImageHandle    The firmware allocated handle for the EFI image.
@param[in] SystemTable    A pointer to the EFI System Table.

@retval EFI_SUCCESS       The entry point is executed successfully.
@retval other             Some error occurs when executing this entry point.


+**/
+EFI_STATUS
+EFIAPI
+ArmPciCpuIo2Initialize (

IN EFI_HANDLE        ImageHandle,
IN EFI_SYSTEM_TABLE  *SystemTable
)

+{

EFI_STATUS Status;

ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiCpuIo2ProtocolGuid);
Status = gBS->InstallMultipleProtocolInterfaces (
             &ImageHandle,


             &gEfiCpuIo2ProtocolGuid, &mCpuIo2,


             NULL


             );


ASSERT_EFI_ERROR (Status);

return Status;

+}
diff --git a/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
new file mode 100644
index 0000000000..fbb28319ca
--- /dev/null
+++ b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
@@ -0,0 +1,48 @@
+## @file
+#  Produces the CPU I/O 2 Protocol by using the services of the I/O Library.
+#
+# Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2016 - 2018, Linaro Ltd. All rights reserved.<BR>
+# Copyright (c) 2018, Hisilicon Ltd. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution.  The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##



+[Defines]

INF_VERSION                    = 0x0001001A
BASE_NAME                      = ArmPciCpuIo2Dxe
FILE_GUID                      = 94577c7e-0bce-11e8-b4e8-286ed489ee9b
MODULE_TYPE                    = DXE_DRIVER
VERSION_STRING                 = 1.0
ENTRY_POINT                    = ArmPciCpuIo2Initialize


+#
+# The following information is for reference only and not required by the build tools.
+#
+#  VALID_ARCHITECTURES           = ARM AARCH64
+#



+[Sources]

ArmPciCpuIo2Dxe.c


+[Packages]

MdePkg/MdePkg.dec


+[LibraryClasses]

UefiDriverEntryPoint
BaseLib
DebugLib
IoLib


+[Protocols]

gEfiCpuIo2ProtocolGuid                         ## PRODUCES


+[Depex]

TRUE

--
2.17.0

    

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Re: [Linaro-uefi] [PATCH edk2-platforms v1 09/13] Hisilicon: add PciCpuIo2Dxe