On 12/21/2017 5:14 PM, Guo Heyi wrote:
On Thu, Dec 21, 2017 at 08:32:37AM +0000, Ard Biesheuvel wrote:
On 21 December 2017 at 08:27, Guo Heyi heyi.guo@linaro.org wrote:
On Wed, Dec 20, 2017 at 03:26:45PM +0000, Ard Biesheuvel wrote:
On 20 December 2017 at 15:17, gary guo heyi.guo@linaro.org wrote:
On Wed, Dec 20, 2017 at 09:13:58AM +0000, Ard Biesheuvel wrote:
Hi Heyi,
On 20 December 2017 at 08:21, Heyi Guo heyi.guo@linaro.org wrote: > PCIe on some ARM platforms requires address translation, not only for > legacy IO access, but also for 32bit memory BAR access as well. There > will be "Address Translation Unit" or something similar in PCI host > bridges to translation CPU address to PCI address and vice versa. So > we think it may be useful to add address translation support to the > generic PCI host bridge driver. >
I agree. While unusual on a PC, it is quite common on other architectures to have more complex non 1:1 topologies, which currently require a forked PciHostBridgeDxe driver with local changes applied.
> This RFC only contains one minor change to the definition of > PciHostBridgeLib, and there certainly will be a lot of other changes > to make it work, including: > > 1. Use CPU address for GCD space add and allocate operations, instead > of PCI address; also IO space will be changed to memory space if > translation exists. >
For I/O space, the translation should simply be applied to the I/O range. I don't think it makes sense to use memory space here, given that it is specific to architectures that lack native port I/O.
I made an assumption here that platforms supporting real port IO space do not need address translation, like IA32 and X64, and port IO translation implies the platform does not support real port IO space.
This may be a reasonable assumption. But I still think it is better not to encode any assumptions in the first place.
Indeed the assumption is not so "generic", so I'll agree if you recommend to support IO to IO translation as well. But I still hope to have IO to memory translation support in PCI host bridge driver, rather than in CPU IO protocol, since the faked IO space might only be used for PCI host bridge and we may have overlapping IO ranges for each host bridge, which is compatible with PCIe specification and PCIe ACPI description.
That is fine. Under UEFI, these will translate to non-overlapping I/O spaces in the CPU's view. Under the OS, this could be totally different.
For example,
RC0 IO 0x0000 .. 0xffff -> CPU 0x00000 .. 0x0ffff RC1 IO 0x0000 .. 0xffff -> CPU 0x10000 .. 0x1ffff
This is very similar to how MMIO translation works, and makes I/O devices behind the host bridges uniquely addressable for drivers.
For our understanding, could you share the host bridge configuration that you are targetting?
IO translation on one of our platforms is like below:
PCI IO space CPU memory space 0x0000 .. 0xffff -> 0xafff0000 .. 0xafffffff (The sizes are always 0x10000 so I will omit the limit for others) 0x0000 .. 0xffff -> 0x8abff0000 0x0000 .. 0xffff -> 0x8b7ff0000 ......
The translated addresses may be beyond 32bit address, will this violate IO space limitation? From EDK2 code, I didn't see such limitation for IO space.
The MMIO address will not be used for I/O port addressing by the CPU. The MMIO to IO translation is an implementation detail of your CpuIo2 protocol implementation.
So there will be two stacked translations, one for PCI I/O to CPU I/O, and one for CPU I/O to CPU MMIO. The latter is transparent to the PCI host bridge driver.
Yes this should work.
Hi Star, Eric and Ruiyu,
Any comments on this RFC?
Let me confirm my understanding: The PciHostBridge core driver/library interface changes only take care of the MMIO translation.
Heyi you will implement a special CpuIo driver in your platform code to take care of the IO to MMIO translation.
But let me confirm, will you need to additional translate the MMIO (translated from IO) to another MMIO using an offset? If yes, will you handle that translation in your CpuIo driver?
Thanks,
Gary
In my opinion, if we still treat the translated address as IO space in PCI host bridge driver while IO space is really translated to memory space, then we couldn't utilize the existing GCD manipulation code in PCI host bridge, including allocating memory space to avoid space colliding (we can't avoid colliding with other drivers which may also use the same memory address), setting MMU page tables. Anyway, this is not a blocking issue.
Thanks and regards,
Gary (Heyi Guo)
Thanks, Ard.
How about adding a flag to indicate whether port IO is translated to real port IO space or system memory space?
Thanks and regards,
Heyi
> 2. RootBridgeIoMemRead/Write, RootBridgeIoRead/Write need to get > translation of the corresponding aperture, add the translation to the > input address, and then call CpuIo2 protocol; IO access will also be > converted to memory access if IO translation exists. >
Again, why is this necessary? A host bridge that implements a non 1:1 translation for port I/O ranges may be part of a system that has native port I/O, and so the translation should be based on that.
> 3. RootBridgeIoConfiguration needs to fill AddrTranslationOffset in > the discriptor. >
Indeed. Note that this has been a source of much confusion lately, should we should discuss this carefully before spending time on an implementation.
> If it makes sense, then I'll continue to prepare the formal patch. > > Any comments? > > Thanks, > > Gary (Heyi Guo) > > Cc: Star Zeng star.zeng@intel.com > Cc: Eric Dong eric.dong@intel.com > Cc: Ruiyu Ni ruiyu.ni@intel.com > Cc: Ard Biesheuvel ard.biesheuvel@linaro.org > Cc: Jason Zhang jason.zhang@linaro.org > > --- > MdeModulePkg/Include/Library/PciHostBridgeLib.h | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/MdeModulePkg/Include/Library/PciHostBridgeLib.h b/MdeModulePkg/Include/Library/PciHostBridgeLib.h > index d42e9ec..b9e8c0f 100644 > --- a/MdeModulePkg/Include/Library/PciHostBridgeLib.h > +++ b/MdeModulePkg/Include/Library/PciHostBridgeLib.h > @@ -22,6 +22,7 @@ > typedef struct { > UINT64 Base; > UINT64 Limit; > + UINT64 Translation; > } PCI_ROOT_BRIDGE_APERTURE; > > typedef struct { > -- > 2.7.4 >