On 9 August 2017 at 15:12, Jun Nie jun.nie@linaro.org wrote:
Runtime service is not supported yet.
Please resubmit when it is. It is not difficult to do, you can just follow the existing examples.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jun Nie jun.nie@linaro.org
.../Zx6718RealTimeClockLib/Zx296718RealTimeClock.c | 376 +++++++++++++++++++++ .../Zx6718RealTimeClockLib/Zx296718RealTimeClock.h | 102 ++++++ .../Zx296718RealTimeClock.inf | 42 +++ 3 files changed, 520 insertions(+) create mode 100644 Silicon/Sanchip/Library/Zx6718RealTimeClockLib/Zx296718RealTimeClock.c create mode 100644 Silicon/Sanchip/Library/Zx6718RealTimeClockLib/Zx296718RealTimeClock.h create mode 100644 Silicon/Sanchip/Library/Zx6718RealTimeClockLib/Zx296718RealTimeClock.inf
diff --git a/Silicon/Sanchip/Library/Zx6718RealTimeClockLib/Zx296718RealTimeClock.c b/Silicon/Sanchip/Library/Zx6718RealTimeClockLib/Zx296718RealTimeClock.c new file mode 100644 index 0000000..af6e5bd --- /dev/null +++ b/Silicon/Sanchip/Library/Zx6718RealTimeClockLib/Zx296718RealTimeClock.c @@ -0,0 +1,376 @@ +/** @file
- Implement EFI RealTimeClock runtime services via RTC Lib.
- Currently this driver does not support runtime virtual calling.
- Copyright (C) 2017 Sanechips Technology Co., Ltd.
- Copyright (c) 2017, Linaro Limited.
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
- Based on the files under ArmPlatformPkg/Library/PL031RealTimeClockLib/PL031RealTimeClockLib.inf
+**/
+#include <Uefi.h> +#include <PiDxe.h> +#include <Library/BaseLib.h> +#include <Library/BaseMemoryLib.h> +#include <Library/DebugLib.h> +#include <Library/IoLib.h> +#include <Library/MemoryAllocationLib.h> +#include <Library/PcdLib.h> +#include <Library/TimerLib.h> +#include <Library/UefiBootServicesTableLib.h> +#include <Library/UefiLib.h> +#include <Library/UefiRuntimeServicesTableLib.h> +// Use EfiAtRuntime to check stage +#include <Library/UefiRuntimeLib.h> +#include <Protocol/RealTimeClock.h> +#include "Zx296718RealTimeClock.h"
+STATIC UINTN RtcBase; +STATIC BOOLEAN RTCInitialized = FALSE;
+BOOLEAN +EFIAPI +IsTimeValid(
- IN EFI_TIME *Time
- )
+{
- // Check the input parameters are within the range specified by UEFI
- if ((Time->Year < 2000) ||
(Time->Year > 2099) ||(Time->Month < 1 ) ||(Time->Month > 12 ) ||(Time->Day < 1 ) ||(Time->Day > 31 ) ||(Time->Hour > 23 ) ||(Time->Minute > 59 ) ||(Time->Second > 59 ) ||(Time->Nanosecond > 999999999) ||(!((Time->TimeZone == EFI_UNSPECIFIED_TIMEZONE) || ((Time->TimeZone >= -1440) && (Time->TimeZone <= 1440)))) ||(Time->Daylight & (~(EFI_TIME_ADJUST_DAYLIGHT | EFI_TIME_IN_DAYLIGHT)))- ) {
- return FALSE;
- }
- return TRUE;
+}
+VOID +Wait4Busy (
- VOID
- )
+{
- UINT32 Val, Retry = 1000;
- do {
- MicroSecondDelay (200);
- Val = MmioRead32 (RtcBase + RTCSTS);
- } while(Val & RTC_BUSY && Retry--);
- if (!Retry)
- DEBUG((DEBUG_ERROR, "%a Rtc busy retry timeout\n", __func__));
+}
+VOID +RTCWriteReg (
- IN UINT32 Reg,
- IN UINT32 Val
- )
+{
- Wait4Busy ();
- MmioWrite32 (RtcBase + RTCCFGID, CONFIG_PARMETER);
- Wait4Busy ();
- MmioWrite32 (RtcBase + Reg, Val);
+}
+UINT32 +RTCReadReg (
- IN UINT32 Reg
- )
+{
- Wait4Busy ();
- return MmioRead32 (RtcBase + Reg);
+}
+VOID +InitializeRTC (
- VOID
- )
+{
- UINTN Val = (UINTN)FixedPcdGet64 (PcdZxRtcClockFreq);
- RTCWriteReg (RTCCLKCNT, Val - 1);
- Val = RTCReadReg (RTCPOWERINIT1);
- if (RTC_POWER_INI1_PARA != Val) {
- RTCWriteReg (RTCCTL, 0);
- MicroSecondDelay (INIT_DELAY);
- Val = RTCReadReg (RTCCTL);
- Val |= RTC_CTRL_BIT6_1;
- RTCWriteReg (RTCCTL, Val);
- Val = RTCReadReg (RTCCTL);
- Val &= RTC_CTRL_MODULE24 | RTC_CTRL_STOP;
- RTCWriteReg (RTCCTL, Val);
- }
- Val = RTCReadReg (RTCINT);
- Val &= ~RTC_IT_MASK;
- RTCWriteReg (RTCINT, Val);
- Val = RTCReadReg (RTCSTS);
- Val |= (RTC_POWER_UP | RTC_ALARM | RTC_TIMER);
- RTCWriteReg (RTCSTS, Val);
- //Wait4Busy ();
- // TODO: write 0x6 to AON int clear
- RTCWriteReg (RTCPOWERINIT1, RTC_POWER_INI1_PARA);
- RTCWriteReg (RTCPOWERINIT2, RTC_POWER_INI2_PARA);
- Val = RTC_CTRL_MODULE24 | RTC_CTRL_RUN | RTC_CTRL_CLK_32K_OUTEN
| RTC_CTRL_BIT6_1;- RTCWriteReg (RTCCTL, Val);
- RTCInitialized = TRUE;
+}
+/**
- Returns the current time and date information, and the time-keeping capabilities
- of the hardware platform.
- @param Time A pointer to storage to receive a snapshot of the current time.
- @param Capabilities An optional pointer to a buffer to receive the real time clock
device's capabilities.- @retval EFI_SUCCESS The operation completed successfully.
- @retval EFI_INVALID_PARAMETER Time is NULL.
- @retval EFI_DEVICE_ERROR The time could not be retrieved due to hardware error.
- @retval EFI_SECURITY_VIOLATION The time could not be retrieved due to an authentication failure.
+**/ +EFI_STATUS +EFIAPI +LibGetTime (
- OUT EFI_TIME *Time,
- OUT EFI_TIME_CAPABILITIES *Capabilities
- )
+{
- EFI_STATUS Status = EFI_SUCCESS;
- // Ensure Time is a valid pointer
- if (NULL == Time) {
- return EFI_INVALID_PARAMETER;
- }
- // Initialize the hardware if not already done
- if (!RTCInitialized) {
- InitializeRTC ();
- }
+#if 0
/* fake time */Time->Year = 2015;Time->Month = 1;Time->Day = 1;Time->Hour = 0;Time->Minute = 0;Time->Second = 0;Time->Nanosecond = 0;+#endif
- RTCWriteReg (RTCGETTIME, 0);
- Time->Year = BCD4_2_BIN (RTCReadReg (RTCYEAR));
- Time->Year += TM_YEAR_START;
- Time->Month = BCD4_2_BIN (RTCReadReg (RTCMONT));
- Time->Day = BCD4_2_BIN (RTCReadReg (RTCDAY));
- Time->Hour = BCD4_2_BIN (RTCReadReg (RTCHOUR));
- Time->Minute = BCD4_2_BIN (RTCReadReg (RTCMIN));
- Time->Second = BCD4_2_BIN (RTCReadReg (RTCSEC));
- Time->Nanosecond = 0;
- Time->Daylight = 0;
- Time->TimeZone = EFI_UNSPECIFIED_TIMEZONE;
- if(!IsTimeValid (Time)) {
- Status = EFI_UNSUPPORTED;
- }
- return Status;
+}
+/**
- Sets the current local time and date information.
- @param Time A pointer to the current time.
- @retval EFI_SUCCESS The operation completed successfully.
- @retval EFI_INVALID_PARAMETER A time field is out of range.
- @retval EFI_DEVICE_ERROR The time could not be set due due to hardware error.
+**/ +EFI_STATUS +EFIAPI +LibSetTime (
- IN EFI_TIME *Time
- )
+{
- EFI_STATUS Status = EFI_SUCCESS;
- // Check the input parameters are within the range specified by UEFI
- if(!IsTimeValid (Time)){
- return EFI_INVALID_PARAMETER;
- }
- // Initialize the hardware if not already done
- if (!RTCInitialized) {
- InitializeRTC ();
- }
- RTCWriteReg (RTCSEC, BIN2BCD (Time->Second));
- RTCWriteReg (RTCMIN, BIN2BCD (Time->Minute));
- RTCWriteReg (RTCHOUR, BIN2BCD (Time->Hour));
- RTCWriteReg (RTCDAY, BIN2BCD (Time->Day));
- RTCWriteReg (RTCMONT, BIN2BCD (Time->Month));
- RTCWriteReg (RTCYEAR, BIN2BCD (Time->Year - TM_YEAR_START));
- return Status;
+}
+/**
- Returns the current wakeup alarm clock setting.
- @param Enabled Indicates if the alarm is currently enabled or disabled.
- @param Pending Indicates if the alarm signal is pending and requires acknowledgement.
- @param Time The current alarm setting.
- @retval EFI_SUCCESS The alarm settings were returned.
- @retval EFI_INVALID_PARAMETER Any parameter is NULL.
- @retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due to a hardware error.
+**/ +EFI_STATUS +EFIAPI +LibGetWakeupTime (
- OUT BOOLEAN *Enabled,
- OUT BOOLEAN *Pending,
- OUT EFI_TIME *Time
- )
+{
- // Not a required feature
- return EFI_UNSUPPORTED;
+}
+/**
- Sets the system wakeup alarm clock time.
- @param Enabled Enable or disable the wakeup alarm.
- @param Time If Enable is TRUE, the time to set the wakeup alarm for.
- @retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was enabled. If
Enable is FALSE, then the wakeup alarm was disabled.- @retval EFI_INVALID_PARAMETER A time field is out of range.
- @retval EFI_DEVICE_ERROR The wakeup time could not be set due to a hardware error.
- @retval EFI_UNSUPPORTED A wakeup timer is not supported on this platform.
+**/ +EFI_STATUS +EFIAPI +LibSetWakeupTime (
- IN BOOLEAN Enabled,
- OUT EFI_TIME *Time
- )
+{
- // Not a required feature
- return EFI_UNSUPPORTED;
+}
+/**
- This is the declaration of an EFI image entry point. This can be the entry point to an application
- written to this specification, an EFI boot service driver, or an EFI runtime driver.
- @param ImageHandle Handle that identifies the loaded image.
- @param SystemTable System Table for this image.
- @retval EFI_SUCCESS The operation completed successfully.
+**/ +EFI_STATUS +EFIAPI +LibRtcInitialize (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
+{
- EFI_STATUS Status;
- EFI_HANDLE Handle;
- EFI_TIME EfiTime;
- // Setup the setters and getters
- gRT->GetTime = LibGetTime;
- gRT->SetTime = LibSetTime;
- gRT->GetWakeupTime = LibGetWakeupTime;
- gRT->SetWakeupTime = LibSetWakeupTime;
- RtcBase = (UINTN)FixedPcdGet64 (PcdZxRtcClockBase);
- (VOID)gRT->GetTime (&EfiTime, NULL);
- if ((EfiTime.Year < 2015) || (EfiTime.Year > 2099)){
EfiTime.Year = 2015;EfiTime.Month = 1;EfiTime.Day = 1;EfiTime.Hour = 0;EfiTime.Minute = 0;EfiTime.Second = 0;EfiTime.Nanosecond = 0;Status = gRT->SetTime (&EfiTime);if (EFI_ERROR (Status)){DEBUG ((DEBUG_ERROR, "[%a]:[%dL] Status : %r\n", __FUNCTION__,__LINE__, Status));}- }
- // Install the protocol
- Handle = NULL;
- Status = gBS->InstallMultipleProtocolInterfaces (
&Handle,&gEfiRealTimeClockArchProtocolGuid, NULL,NULL);- return Status;
+}
+/**
- Fixup internal data so that EFI can be call in virtual mode.
- Call the passed in Child Notify event and convert any pointers in
- lib to virtual mode.
- @param[in] Event The Event that is being processed
- @param[in] Context Event Context
+**/ +VOID +EFIAPI +LibRtcVirtualNotifyEvent (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
+{
- //
- // Only needed if you are going to support the OS calling RTC functions in virtual mode.
- // You will need to call EfiConvertPointer (). To convert any stored physical addresses
- // to virtual address. After the OS transitions to calling in virtual mode, all future
- // runtime calls will be made in virtual mode.
- //
- return;
+} diff --git a/Silicon/Sanchip/Library/Zx6718RealTimeClockLib/Zx296718RealTimeClock.h b/Silicon/Sanchip/Library/Zx6718RealTimeClockLib/Zx296718RealTimeClock.h new file mode 100644 index 0000000..3b5a4d4 --- /dev/null +++ b/Silicon/Sanchip/Library/Zx6718RealTimeClockLib/Zx296718RealTimeClock.h @@ -0,0 +1,102 @@ +/** @file +* +* Copyright (C) 2017 Sanechips Technology Co., Ltd. +* Copyright (c) 2017, Linaro Ltd. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +* Based on the files under ArmPlatformPkg/Library/PL031RealTimeClockLib/PL031RealTimeClockLib.inf +**/
+#ifndef __DS3231_REAL_TIME_CLOCK_H__ +#define __DS3231_REAL_TIME_CLOCK_H__
+#define RTC_POWER_INI1_PARA (0xCDBC) +#define RTC_POWER_INI2_PARA (0xCFCC) +#define CONFIG_PARMETER (0xC1CD)
+#define ZX_RTC_CMP_VALUE (0x3FFF) +#define WAIT_FOR_COUNT (2000) +#define INIT_DELAY (100)
+/* RTC Control register description */ +#define RTC_CTRL_STOP (~(0x1 << 0)) +#define RTC_CTRL_RUN (0x1 << 0) +#define RTC_CTRL_ROUND30S (0x1 << 1) +#define RTC_CTRL_AUTO_COMPENSATION (0x1 << 2) +#define RTC_CTRL_MODULE12 (0x1 << 3) +#define RTC_CTRL_MODULE24 (~(0x1 << 3)) +#define RTC_CTRL_SET_32_COUNTER (0x1 << 5) +#define RTC_CTRL_SOFT_RESET (0x1 << 6) +#define RTC_CTRL_CLK_32K_OUTEN (0x1 << 8)
+#define RTC_CTRL_BIT6_0 ( ~(0x1 << 6)) +#define RTC_CTRL_BIT6_1 (0x1 << 6)
+/* RTC Interrupt register description */ +#define RTC_EVERY_MASK (0x3 << 0) +#define RTC_EVERY_SEC 0x00 /* second periodic intrrupt */ +#define RTC_EVERY_MIN 0x01 /* minute periodic interrupt */ +#define RTC_EVERY_HR 0x02 /* hour periodic interrupt */ +#define RTC_EVERY_DAY 0x03 /* day periodic interrupt */ +#define RTC_IT_TIMER (0x1 << 2) /* Enable periodic interrupt */ +#define RTC_IT_ALARM (0x1 << 3) /* Enable alarm clock interrupt */ +#define RTC_IT_MASK (0x3 << 2)
+/* RTC Status register description */ +#define RTC_BUSY (0x1 << 0) /* Read-only, indicate refresh*/ +#define RTC_RUN (0x1 << 1) /* Read-only, RTC is running */ +#define RTC_ALARM (0x1 << 6) /* Read/Write, Alarm interrupt has been generated */ +#define RTC_TIMER (0x1 << 7) /* Read/Write, Timer interrupt has been generated */ +#define RTC_POWER_UP (0x1 << 8) /* Read/Write, Reset */
+#define TM_YEAR_START 1900
+#define TM_MONTH_OFFSET 1
+#define TM_WDAY_SUNDAY 0 +#define ZX_RTC_SUNDAY 7
+#define BCD2BIN(val) (((val) & 0x0f) + ((val) >> 4) * 10) +#define BIN2BCD(val) ((((val) / 10) << 4) + (val) % 10)
+#define BCD4_2_BIN(x) (( (x) & 0x0F) + \
((((x) & 0x0F0) >> 4) * 10) + \((((x) & 0xF00) >> 8) * 100) + \((((x) & 0xF000) >> 12) * 1000))+#define BIN_2_BCD4(x) (((x % 10) & 0x0F) | \
(((x /10 ) % 10) << 4) | \(((x /100) % 10) << 8) | \(((x /1000) % 10) << 12))+/* RTC register offset */ +#define RTCVER 0 +#define RTCSEC 4 +#define RTCMIN 8 +#define RTCHOUR 0xc +#define RTCDAY 0x10 +#define RTCMONT 0x14 +#define RTCYEAR 0x18 +#define RTCWEEK 0x1c +#define RTCCTL 0x38 +#define RTCSTS 0x3c +#define RTCINT 0x40 +#define RTCCFGID 0x48 +#define RTCPOWERINIT1 0x4c +#define RTCPOWERINIT2 0x50 +#define RTCGETTIME 0x54 +#define RTCCLKCNT 0x58
+#endif diff --git a/Silicon/Sanchip/Library/Zx6718RealTimeClockLib/Zx296718RealTimeClock.inf b/Silicon/Sanchip/Library/Zx6718RealTimeClockLib/Zx296718RealTimeClock.inf new file mode 100644 index 0000000..0a6852b --- /dev/null +++ b/Silicon/Sanchip/Library/Zx6718RealTimeClockLib/Zx296718RealTimeClock.inf @@ -0,0 +1,42 @@ +#/** @file +# +# Copyright (c) 2017, Linaro Limited. All rights reserved.<BR> +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# +#**/
+[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = Zx296718RealTimeClockLib
- FILE_GUID = 4e1aaa26-597c-4f01-a8fc-fdf1adc1400f
- MODULE_TYPE = BASE
- VERSION_STRING = 1.0
- LIBRARY_CLASS = RealTimeClockLib
+[Sources.common]
- Zx296718RealTimeClock.c
+[Packages]
- MdePkg/MdePkg.dec
- EmbeddedPkg/EmbeddedPkg.dec
- Silicon/Sanchip/SanchipPkg.dec
+[LibraryClasses]
- IoLib
- UefiLib
- DebugLib
- PcdLib
- TimerLib
+# Use EFiAtRuntime to check stage
- UefiRuntimeLib
+[FixedPcd]
- gSanchipTokenSpaceGuid.PcdZxRtcClockBase
- gSanchipTokenSpaceGuid.PcdZxRtcClockFreq
-- 1.9.1