Re: [Linaro-uefi] [PATCH] Chips/TI Platforms/TI: drop BeagleBoard

25 Oct 2016

On Tue, Oct 25, 2016 at 06:49:48PM +0100, Ard Biesheuvel wrote:
...
There is no longer a reason to keep a clone of the EDK2 version in
OpenPlatformPkg, so remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel ard.biesheuvel@linaro.org
Reviewed-by: Leif Lindholm leif.lindholm@linaro.org
...

Chips/TexasInstruments/Omap35xx/Contributions.txt                                       |  218 ---
 Chips/TexasInstruments/Omap35xx/Flash/Flash.c                                           |  774 ----------
 Chips/TexasInstruments/Omap35xx/Flash/Flash.h                                           |  106 --
 Chips/TexasInstruments/Omap35xx/Flash/Flash.inf                                         |   48 -
 Chips/TexasInstruments/Omap35xx/Gpio/Gpio.c                                             |  135 --
 Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf                                           |   45 -
 Chips/TexasInstruments/Omap35xx/Include/Library/OmapDmaLib.h                            |   90 --
 Chips/TexasInstruments/Omap35xx/Include/Library/OmapLib.h                               |   44 -
 Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530.h                             |   40 -
 Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Dma.h                          |  130 --
 Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpio.h                         |  131 --
 Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpmc.h                         |  107 --
 Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530I2c.h                          |   62 -
 Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Interrupt.h                    |   48 -
 Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530MMCHS.h                        |  214 ---
 Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530PadConfiguration.h             |  303 ----
 Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Prcm.h                         |  165 ---
 Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Timer.h                        |   82 --
 Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Uart.h                         |   54 -
 Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Usb.h                          |   48 -
 Chips/TexasInstruments/Omap35xx/Include/TPS65950.h                                      |   80 --
 Chips/TexasInstruments/Omap35xx/InterruptDxe/HardwareInterrupt.c                        |  357 -----
 Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf                           |   54 -
 Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputBlt.c             |  445 ------
 Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c             |  400 ------
 Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.h             |  157 --
 Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf           |   52 -
 Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.c         |  165 ---
 Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.inf       |   46 -
 Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.c                           |   72 -
 Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.inf                         |   48 -
 Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.c                     |  102 --
 Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.inf                   |   41 -
 Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/Omap35xxTimerLib.inf           |   45 -
 Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/TimerLib.c                     |  133 --
 Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.c                         |  176 ---
 Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf                       |   50 -
 Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.c                               |   83 --
 Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf                             |   37 -
 Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.c             |  297 ----
 Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.inf           |   38 -
 Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.c                 |   90 --
 Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.inf               |   40 -
 Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.c                   |  214 ---
 Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.inf                 |   44 -
 Chips/TexasInstruments/Omap35xx/License.txt                                             |   26 -
 Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.c                                        | 1494 --------------------
 Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.h                                        |  175 ---
 Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.inf                                      |   54 -
 Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.c                                 |  677 ---------
 Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.h                                 |   44 -
 Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.inf                               |   53 -
 Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec                                         |   58 -
 Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dsc                                         |  188 ---
 Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.c                             |  633 ---------
 Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.h                             |  292 ----
 Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.inf                           |   56 -
 Chips/TexasInstruments/Omap35xx/PciEmulation/PciRootBridgeIo.c                          |  306 ----
 Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.c                                        |  325 -----
 Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf                                      |   45 -
 Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.c                                  |  116 --
 Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf                                |   48 -
 Chips/TexasInstruments/Omap35xx/TimerDxe/Timer.c                                        |  376 -----
 Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf                                   |   57 -
 Platforms/TexasInstruments/BeagleBoard/Bds/Bds.inf                                      |   65 -
 Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.c                                   |  242 ----
 Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.h                                   |   66 -
 Platforms/TexasInstruments/BeagleBoard/Bds/FirmwareVolume.c                             |  150 --
 Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dec                               |   36 -
 Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dsc                               |  481 -------
 Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.fdf                               |  310 ----
 Platforms/TexasInstruments/BeagleBoard/ConfigurationHeader.dat                          |   41 -
 Platforms/TexasInstruments/BeagleBoard/Contributions.txt                                |  218 ---
 Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_boot_from_ram.inc           |   21 -
 Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_convert_symbols.sh          |   23 -
 Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_dummy.axf                   |  Bin 7984 -> 0 bytes
 Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_hw_setup.inc                |   67 -
 Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_load_symbols.inc            |   23 -
 Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_symbols_macros.inc          |  194 ---
 Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_unload_symbols.inc          |  118 --
 Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols.cmm        |  211 ---
 Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols_cygwin.cmm |  188 ---
 Platforms/TexasInstruments/BeagleBoard/Include/BeagleBoard.h                            |  179 ---
 Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoard.c             |  135 --
 Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.S       |   37 -
 Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.asm     |   48 -
 Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardLib.inf        |   54 -
 Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardMem.c          |   84 --
 Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/Clock.c                   |   69 -
 Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/PadConfiguration.c        |  322 -----
 Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.c                    |  299 ----
 Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.inf                  |   53 -
 Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.c              |  103 --
 Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.inf            |   41 -
 Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.c          |  165 ---
 Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.inf        |   49 -
 Platforms/TexasInstruments/BeagleBoard/License.txt                                      |   26 -
 Platforms/TexasInstruments/BeagleBoard/Tools/GNUmakefile                                |   20 -
 Platforms/TexasInstruments/BeagleBoard/Tools/generate_image.c                           |  408 ------
 Platforms/TexasInstruments/BeagleBoard/Tools/makefile                                   |   22 -
 Platforms/TexasInstruments/BeagleBoard/Tools/replace.c                                  |  146 --
 Platforms/TexasInstruments/BeagleBoard/b.bat                                            |   68 -
 Platforms/TexasInstruments/BeagleBoard/ba.bat                                           |   68 -
 Platforms/TexasInstruments/BeagleBoard/build.sh                                         |  150 --
 Platforms/TexasInstruments/BeagleBoard/readme.txt                                       |   78 -
 105 files changed, 16211 deletions(-)

diff --git a/Chips/TexasInstruments/Omap35xx/Contributions.txt b/Chips/TexasInstruments/Omap35xx/Contributions.txt
deleted file mode 100644
index f87cbd73c693..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Contributions.txt
+++ /dev/null
@@ -1,218 +0,0 @@



-======================
-= Code Contributions =



-To make a contribution to a TianoCore project, follow these steps.
-1. Create a change description in the format specified below to

use in the source control commit log.

-2. Your commit message must include your "Signed-off-by" signature,

and "Contributed-under" message.

-3. Your "Contributed-under" message explicitly states that the

contribution is made under the terms of the specified
contribution agreement.  Your "Contributed-under" message
must include the name of contribution agreement and version.
For example: Contributed-under: TianoCore Contribution Agreement 1.0
The "TianoCore Contribution Agreement" is included below in
this document.

-4. Submit your code to the TianoCore project using the process

that the project documents on its web page.  If the process is
not documented, then submit the code on development email list
for the project.

-5. It is preferred that contributions are submitted using the same

copyright license as the base project. When that is not possible,
then contributions using the following licenses can be accepted:

BSD (2-clause): http://opensource.org/licenses/BSD-2-Clause



BSD (3-clause): http://opensource.org/licenses/BSD-3-Clause



MIT: http://opensource.org/licenses/MIT



Python-2.0: http://opensource.org/licenses/Python-2.0



Zlib: http://opensource.org/licenses/Zlib



Contributions of code put into the public domain can also be
accepted.

Contributions using other licenses might be accepted, but further
review will be required.


-=====================================================
-= Change Description / Commit Message / Patch Email =



-Your change description should use the standard format for a
-commit message, and must include your "Signed-off-by" signature
-and the "Contributed-under" message.



-== Sample Change Description / Commit Message =



-=== Start of sample patch email message ===



-From: Contributor Name contributor@example.com
-Subject: [PATCH] CodeModule: Brief-single-line-summary



-Full-commit-message



-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name contributor@example.com



-An extra message for the patch email which will not be considered part
-of the commit message can be added here.



-Patch content inline or attached



-=== End of sample patch email message ===



-=== Notes for sample patch email ===



-* The first line of commit message is taken from the email's subject

line following [PATCH]. The remaining portion of the commit message
is the email's content until the '---' line.

-* git format-patch is one way to create this format



-=== Definitions for sample patch email ===



-* "CodeModule" is a short idenfier for the affected code.  For

example MdePkg, or MdeModulePkg UsbBusDxe.

-* "Brief-single-line-summary" is a short summary of the change.
-* The entire first line should be less than ~70 characters.
-* "Full-commit-message" a verbose multiple line comment describing

the change.  Each line should be less than ~70 characters.

-* "Contributed-under" explicitely states that the contribution is

made under the terms of the contribtion agreement.  This
agreement is included below in this document.

-* "Signed-off-by" is the contributor's signature identifying them

by their real/legal name and their email address.


-========================================
-= TianoCore Contribution Agreement 1.0 =



-INTEL CORPORATION ("INTEL") MAKES AVAILABLE SOFTWARE, DOCUMENTATION,
-INFORMATION AND/OR OTHER MATERIALS FOR USE IN THE TIANOCORE OPEN SOURCE
-PROJECT (COLLECTIVELY "CONTENT"). USE OF THE CONTENT IS GOVERNED BY THE
-TERMS AND CONDITIONS OF THIS AGREEMENT BETWEEN YOU AND INTEL AND/OR THE
-TERMS AND CONDITIONS OF LICENSE AGREEMENTS OR NOTICES INDICATED OR
-REFERENCED BELOW. BY USING THE CONTENT, YOU AGREE THAT YOUR USE OF THE
-CONTENT IS GOVERNED BY THIS AGREEMENT AND/OR THE TERMS AND CONDITIONS
-OF ANY APPLICABLE LICENSE AGREEMENTS OR NOTICES INDICATED OR REFERENCED
-BELOW. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS
-AGREEMENT AND THE TERMS AND CONDITIONS OF ANY APPLICABLE LICENSE
-AGREEMENTS OR NOTICES INDICATED OR REFERENCED BELOW, THEN YOU MAY NOT
-USE THE CONTENT.



-Unless otherwise indicated, all Content made available on the TianoCore
-site is provided to you under the terms and conditions of the BSD
-License ("BSD"). A copy of the BSD License is available at
-http://opensource.org/licenses/bsd-license.php
-or when applicable, in the associated License.txt file.



-Certain other content may be made available under other licenses as
-indicated in or with such Content. (For example, in a License.txt file.)



-You accept and agree to the following terms and conditions for Your
-present and future Contributions submitted to TianoCore site. Except
-for the license granted to Intel hereunder, You reserve all right,
-title, and interest in and to Your Contributions.



-== SECTION 1: Definitions ==
-* "You" or "Contributor" shall mean the copyright owner or legal

entity authorized by the copyright owner that is making a
Contribution hereunder. All other entities that control, are
controlled by, or are under common control with that entity are
considered to be a single Contributor. For the purposes of this
definition, "control" means (i) the power, direct or indirect, to
cause the direction or management of such entity, whether by
contract or otherwise, or (ii) ownership of fifty percent (50%)
or more of the outstanding shares, or (iii) beneficial ownership
of such entity.

-* "Contribution" shall mean any original work of authorship,

including any modifications or additions to an existing work,
that is intentionally submitted by You to the TinaoCore site for
inclusion in, or documentation of, any of the Content. For the
purposes of this definition, "submitted" means any form of
electronic, verbal, or written communication sent to the
TianoCore site or its representatives, including but not limited
to communication on electronic mailing lists, source code
control systems, and issue tracking systems that are managed by,
or on behalf of, the TianoCore site for the purpose of
discussing and improving the Content, but excluding
communication that is conspicuously marked or otherwise
designated in writing by You as "Not a Contribution."


-== SECTION 2: License for Contributions ==
-* Contributor hereby agrees that redistribution and use of the

Contribution in source and binary forms, with or without
modification, are permitted provided that the following
conditions are met:

-** Redistributions of source code must retain the Contributor's

copyright notice, this list of conditions and the following
disclaimer.

-** Redistributions in binary form must reproduce the Contributor's

copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided
with the distribution.

-* Disclaimer. None of the names of Contributor, Intel, or the names

of their respective contributors may be used to endorse or
promote products derived from this software without specific
prior written permission.

-* Contributor grants a license (with the right to sublicense) under

claims of Contributor's patents that Contributor can license that
are infringed by the Contribution (as delivered by Contributor) to
make, use, distribute, sell, offer for sale, and import the
Contribution and derivative works thereof solely to the minimum
extent necessary for licensee to exercise the granted copyright
license; this patent license applies solely to those portions of
the Contribution that are unmodified. No hardware per se is
licensed.

-* EXCEPT AS EXPRESSLY SET FORTH IN SECTION 3 BELOW, THE

CONTRIBUTION IS PROVIDED BY THE CONTRIBUTOR "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
CONTRIBUTOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THE
CONTRIBUTION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.


-== SECTION 3: Representations ==
-* You represent that You are legally entitled to grant the above

license. If your employer(s) has rights to intellectual property
that You create that includes Your Contributions, You represent
that You have received permission to make Contributions on behalf
of that employer, that Your employer has waived such rights for
Your Contributions.

-* You represent that each of Your Contributions is Your original

creation (see Section 4 for submissions on behalf of others).
You represent that Your Contribution submissions include complete
details of any third-party license or other restriction
(including, but not limited to, related patents and trademarks)
of which You are personally aware and which are associated with
any part of Your Contributions.


-== SECTION 4: Third Party Contributions ==
-* Should You wish to submit work that is not Your original creation,

You may submit it to TianoCore site separately from any
Contribution, identifying the complete details of its source
and of any license or other restriction (including, but not
limited to, related patents, trademarks, and license agreements)
of which You are personally aware, and conspicuously marking the
work as "Submitted on behalf of a third-party: [named here]".


-== SECTION 5: Miscellaneous ==
-* Applicable Laws. Any claims arising under or relating to this

Agreement shall be governed by the internal substantive laws of
the State of Delaware or federal courts located in Delaware,
without regard to principles of conflict of laws.

-* Language. This Agreement is in the English language only, which

language shall be controlling in all respects, and all versions
of this Agreement in any other language shall be for accommodation
only and shall not be binding. All communications and notices made
or given pursuant to this Agreement, and all documentation and
support to be provided, unless otherwise noted, shall be in the
English language.


diff --git a/Chips/TexasInstruments/Omap35xx/Flash/Flash.c b/Chips/TexasInstruments/Omap35xx/Flash/Flash.c
deleted file mode 100644
index b8de109d87b4..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Flash/Flash.c
+++ /dev/null
@@ -1,774 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include "Flash.h"



-NAND_PART_INFO_TABLE gNandPartInfoTable[1] = {

{ 0x2C, 0xBA, 17, 11 }

-};



-NAND_FLASH_INFO *gNandFlashInfo = NULL;
-UINT8           *gEccCode;
-UINTN           gNum512BytesChunks = 0;



-//



-// Device path for SemiHosting. It contains our autogened Caller ID GUID.



-//



-typedef struct {


VENDOR_DEVICE_PATH        Guid;

EFI_DEVICE_PATH_PROTOCOL  End;


-} FLASH_DEVICE_PATH;





-FLASH_DEVICE_PATH gDevicePath = {

{
{ HARDWARE_DEVICE_PATH, HW_VENDOR_DP, { sizeof (VENDOR_DEVICE_PATH), 0 } },
EFI_CALLER_ID_GUID
},
{ END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0} }

-};





-//Actual page address = Column address + Page address + Block address.
-UINTN
-GetActualPageAddressInBytes (

UINTN BlockIndex,
UINTN PageIndex

-)
-{

//BlockAddressStart = Start of the Block address in actual NAND
//PageAddressStart = Start of the Page address in actual NAND
return ((BlockIndex << gNandFlashInfo->BlockAddressStart) + (PageIndex << gNandFlashInfo->PageAddressStart));

-}



-VOID
-NandSendCommand (

UINT8 Command

-)
-{

MmioWrite16(GPMC_NAND_COMMAND_0, Command);

-}



-VOID
-NandSendAddress (

UINT8 Address

-)
-{

MmioWrite16(GPMC_NAND_ADDRESS_0, Address);

-}



-UINT16
-NandReadStatus (

VOID
)

-{

//Send READ STATUS command
NandSendCommand(READ_STATUS_CMD);

//Read status.
return MmioRead16(GPMC_NAND_DATA_0);

-}



-VOID
-NandSendAddressCycles (

UINTN Address

-)
-{

//Column address
NandSendAddress(Address & 0xff);
Address >>= 8;

//Column address
NandSendAddress(Address & 0x07);
Address >>= 3;

//Page and Block address
NandSendAddress(Address & 0xff);
Address >>= 8;

//Block address
NandSendAddress(Address & 0xff);
Address >>= 8;

//Block address
NandSendAddress(Address & 0x01);

-}



-VOID
-GpmcInit (

VOID
)

-{

//Enable Smart-idle mode.
MmioWrite32 (GPMC_SYSCONFIG, SMARTIDLEMODE);

//Set IRQSTATUS and IRQENABLE to the reset value
MmioWrite32 (GPMC_IRQSTATUS, 0x0);
MmioWrite32 (GPMC_IRQENABLE, 0x0);

//Disable GPMC timeout control.
MmioWrite32 (GPMC_TIMEOUT_CONTROL, TIMEOUTDISABLE);

//Set WRITEPROTECT bit to enable write access.
MmioWrite32 (GPMC_CONFIG, WRITEPROTECT_HIGH);

//NOTE: Following GPMC_CONFIGi_0 register settings are taken from u-boot memory dump.
MmioWrite32 (GPMC_CONFIG1_0, DEVICETYPE_NAND | DEVICESIZE_X16);
MmioWrite32 (GPMC_CONFIG2_0, CSRDOFFTIME | CSWROFFTIME);
MmioWrite32 (GPMC_CONFIG3_0, ADVRDOFFTIME | ADVWROFFTIME);
MmioWrite32 (GPMC_CONFIG4_0, OEONTIME | OEOFFTIME | WEONTIME | WEOFFTIME);
MmioWrite32 (GPMC_CONFIG5_0, RDCYCLETIME | WRCYCLETIME | RDACCESSTIME | PAGEBURSTACCESSTIME);
MmioWrite32 (GPMC_CONFIG6_0, WRACCESSTIME | WRDATAONADMUXBUS | CYCLE2CYCLEDELAY | CYCLE2CYCLESAMECSEN);
MmioWrite32 (GPMC_CONFIG7_0, MASKADDRESS_128MB | CSVALID | BASEADDRESS);

-}



-EFI_STATUS
-NandDetectPart (

VOID

-)
-{

UINT8      NandInfo = 0;
UINT8      PartInfo[5];
UINTN      Index;
BOOLEAN    Found = FALSE;

//Send READ ID command
NandSendCommand(READ_ID_CMD);

//Send one address cycle.
NandSendAddress(0);

//Read 5-bytes to idenfity code programmed into the NAND flash devices.
//BYTE 0 = Manufacture ID
//Byte 1 = Device ID
//Byte 2, 3, 4 = Nand part specific information (Page size, Block size etc)
for (Index = 0; Index < sizeof(PartInfo); Index++) {
PartInfo[Index] = MmioRead16(GPMC_NAND_DATA_0);
}

//Check if the ManufactureId and DeviceId are part of the currently supported nand parts.
for (Index = 0; Index < sizeof(gNandPartInfoTable)/sizeof(NAND_PART_INFO_TABLE); Index++) {
if (gNandPartInfoTable[Index].ManufactureId == PartInfo[0] && gNandPartInfoTable[Index].DeviceId == PartInfo[1]) {
 gNandFlashInfo->BlockAddressStart = gNandPartInfoTable[Index].BlockAddressStart;


 gNandFlashInfo->PageAddressStart = gNandPartInfoTable[Index].PageAddressStart;


 Found = TRUE;


 break;


}
}

if (Found == FALSE) {
DEBUG ((EFI_D_ERROR, "Nand part is not currently supported. Manufacture id: %x, Device id: %x\n", PartInfo[0], PartInfo[1]));
return EFI_NOT_FOUND;
}

//Populate NAND_FLASH_INFO based on the result of READ ID command.
gNandFlashInfo->ManufactureId = PartInfo[0];
gNandFlashInfo->DeviceId = PartInfo[1];
NandInfo = PartInfo[3];

if (PAGE_SIZE(NandInfo) == PAGE_SIZE_2K_VAL) {
gNandFlashInfo->PageSize = PAGE_SIZE_2K;
} else {
DEBUG ((EFI_D_ERROR, "Unknown Page size.\n"));
return EFI_DEVICE_ERROR;
}

if (SPARE_AREA_SIZE(NandInfo) == SPARE_AREA_SIZE_64B_VAL) {
gNandFlashInfo->SparePageSize = SPARE_AREA_SIZE_64B;
} else {
DEBUG ((EFI_D_ERROR, "Unknown Spare area size.\n"));
return EFI_DEVICE_ERROR;
}

if (BLOCK_SIZE(NandInfo) == BLOCK_SIZE_128K_VAL) {
gNandFlashInfo->BlockSize = BLOCK_SIZE_128K;
} else {
DEBUG ((EFI_D_ERROR, "Unknown Block size.\n"));
return EFI_DEVICE_ERROR;
}

if (ORGANIZATION(NandInfo) == ORGANIZATION_X8) {
gNandFlashInfo->Organization = 0;
} else if (ORGANIZATION(NandInfo) == ORGANIZATION_X16) {
gNandFlashInfo->Organization = 1;
}

//Calculate total number of blocks.
gNandFlashInfo->NumPagesPerBlock = DivU64x32(gNandFlashInfo->BlockSize, gNandFlashInfo->PageSize);

return EFI_SUCCESS;

-}



-VOID
-NandConfigureEcc (

VOID
)

-{

//Define ECC size 0 and size 1 to 512 bytes
MmioWrite32 (GPMC_ECC_SIZE_CONFIG, (ECCSIZE0_512BYTES | ECCSIZE1_512BYTES));

-}



-VOID
-NandEnableEcc (

VOID
)

-{

//Clear all the ECC result registers and select ECC result register 1
MmioWrite32 (GPMC_ECC_CONTROL, (ECCCLEAR | ECCPOINTER_REG1));

//Enable ECC engine on CS0
MmioWrite32 (GPMC_ECC_CONFIG, (ECCENABLE | ECCCS_0 | ECC16B));

-}



-VOID
-NandDisableEcc (

VOID
)

-{

//Turn off ECC engine.
MmioWrite32 (GPMC_ECC_CONFIG, ECCDISABLE);

-}



-VOID
-NandCalculateEcc (

VOID
)

-{

UINTN Index;
UINTN EccResultRegister;
UINTN EccResult;

//Capture 32-bit ECC result for each 512-bytes chunk.
//In our case PageSize is 2K so read ECC1-ECC4 result registers and
//generate total of 12-bytes of ECC code for the particular page.

EccResultRegister = GPMC_ECC1_RESULT;

for (Index = 0; Index < gNum512BytesChunks; Index++) {

EccResult = MmioRead32 (EccResultRegister);

//Calculate ECC code from 32-bit ECC result value.
//NOTE: Following calculation is not part of TRM. We got this information
//from Beagleboard mailing list.
gEccCode[Index * 3] = EccResult & 0xFF;
gEccCode[(Index * 3) + 1] = (EccResult >> 16) & 0xFF;
gEccCode[(Index * 3) + 2] = (((EccResult >> 20) & 0xF0) | ((EccResult >> 8) & 0x0F));

//Point to next ECC result register.
EccResultRegister += 4;
}

-}



-EFI_STATUS
-NandReadPage (

IN  UINTN                         BlockIndex,
IN  UINTN                         PageIndex,
OUT VOID                          *Buffer,
OUT UINT8                         *SpareBuffer

-)
-{

UINTN      Address;
UINTN      Index;
UINTN      NumMainAreaWords = (gNandFlashInfo->PageSize/2);
UINTN      NumSpareAreaWords = (gNandFlashInfo->SparePageSize/2);
UINT16     *MainAreaWordBuffer = Buffer;
UINT16     *SpareAreaWordBuffer = (UINT16 *)SpareBuffer;
UINTN      Timeout = MAX_RETRY_COUNT;

//Generate device address in bytes to access specific block and page index
Address = GetActualPageAddressInBytes(BlockIndex, PageIndex);

//Send READ command
NandSendCommand(PAGE_READ_CMD);

//Send 5 Address cycles to access specific device address
NandSendAddressCycles(Address);

//Send READ CONFIRM command
NandSendCommand(PAGE_READ_CONFIRM_CMD);

//Poll till device is busy.
while (Timeout) {
if ((NandReadStatus() & NAND_READY) == NAND_READY) {
 break;


}
Timeout--;
}

if (Timeout == 0) {
DEBUG ((EFI_D_ERROR, "Read page timed out.\n"));
return EFI_TIMEOUT;
}

//Reissue READ command
NandSendCommand(PAGE_READ_CMD);

//Enable ECC engine.
NandEnableEcc();

//Read data into the buffer.
for (Index = 0; Index < NumMainAreaWords; Index++) {
*MainAreaWordBuffer++ = MmioRead16(GPMC_NAND_DATA_0);
}

//Read spare area into the buffer.
for (Index = 0; Index < NumSpareAreaWords; Index++) {
*SpareAreaWordBuffer++ = MmioRead16(GPMC_NAND_DATA_0);
}

//Calculate ECC.
NandCalculateEcc();

//Turn off ECC engine.
NandDisableEcc();

//Perform ECC correction.
//Need to implement..

return EFI_SUCCESS;

-}



-EFI_STATUS
-NandWritePage (

IN  UINTN                         BlockIndex,
IN  UINTN                         PageIndex,
OUT VOID                          *Buffer,
IN  UINT8                         *SpareBuffer

-)
-{

UINTN      Address;
UINT16     *MainAreaWordBuffer = Buffer;
UINT16     *SpareAreaWordBuffer = (UINT16 *)SpareBuffer;
UINTN      Index;
UINTN      NandStatus;
UINTN      Timeout = MAX_RETRY_COUNT;

//Generate device address in bytes to access specific block and page index
Address = GetActualPageAddressInBytes(BlockIndex, PageIndex);

//Send SERIAL DATA INPUT command
NandSendCommand(PROGRAM_PAGE_CMD);

//Send 5 Address cycles to access specific device address
NandSendAddressCycles(Address);

//Enable ECC engine.
NandEnableEcc();

//Data input from Buffer
for (Index = 0; Index < (gNandFlashInfo->PageSize/2); Index++) {
MmioWrite16(GPMC_NAND_DATA_0, *MainAreaWordBuffer++);

//After each write access, device has to wait to accept data.
//Currently we may not be programming proper timing parameters to
//the GPMC_CONFIGi_0 registers and we would need to figure that out.
//Without following delay, page programming fails.
gBS->Stall(1);
}

//Calculate ECC.
NandCalculateEcc();

//Turn off ECC engine.
NandDisableEcc();

//Prepare Spare area buffer with ECC codes.
SetMem(SpareBuffer, gNandFlashInfo->SparePageSize, 0xFF);
CopyMem(&SpareBuffer[ECC_POSITION], gEccCode, gNum512BytesChunks * 3);

//Program spare area with calculated ECC.
for (Index = 0; Index < (gNandFlashInfo->SparePageSize/2); Index++) {
MmioWrite16(GPMC_NAND_DATA_0, *SpareAreaWordBuffer++);
}

//Send PROGRAM command
NandSendCommand(PROGRAM_PAGE_CONFIRM_CMD);

//Poll till device is busy.
NandStatus = 0;
while (Timeout) {
NandStatus = NandReadStatus();
if ((NandStatus & NAND_READY) == NAND_READY) {
 break;


}
Timeout--;
}

if (Timeout == 0) {
DEBUG ((EFI_D_ERROR, "Program page timed out.\n"));
return EFI_TIMEOUT;
}

//Bit0 indicates Pass/Fail status
if (NandStatus & NAND_FAILURE) {
return EFI_DEVICE_ERROR;
}

return EFI_SUCCESS;

-}



-EFI_STATUS
-NandEraseBlock (

IN UINTN BlockIndex

-)
-{

UINTN      Address;
UINTN      NandStatus;
UINTN      Timeout = MAX_RETRY_COUNT;

//Generate device address in bytes to access specific block and page index
Address = GetActualPageAddressInBytes(BlockIndex, 0);

//Send ERASE SETUP command
NandSendCommand(BLOCK_ERASE_CMD);

//Send 3 address cycles to device to access Page address and Block address
Address >>= 11; //Ignore column addresses

NandSendAddress(Address & 0xff);
Address >>= 8;

NandSendAddress(Address & 0xff);
Address >>= 8;

NandSendAddress(Address & 0xff);

//Send ERASE CONFIRM command
NandSendCommand(BLOCK_ERASE_CONFIRM_CMD);

//Poll till device is busy.
NandStatus = 0;
while (Timeout) {
NandStatus = NandReadStatus();
if ((NandStatus & NAND_READY) == NAND_READY) {
 break;


}
Timeout--;
gBS->Stall(1);
}

if (Timeout == 0) {
DEBUG ((EFI_D_ERROR, "Erase block timed out for Block: %d.\n", BlockIndex));
return EFI_TIMEOUT;
}

//Bit0 indicates Pass/Fail status
if (NandStatus & NAND_FAILURE) {
return EFI_DEVICE_ERROR;
}

return EFI_SUCCESS;

-}



-EFI_STATUS
-NandReadBlock (

IN UINTN                          StartBlockIndex,
IN UINTN                          EndBlockIndex,
OUT VOID                          *Buffer,
OUT VOID                          *SpareBuffer

-)
-{

UINTN      BlockIndex;
UINTN      PageIndex;
EFI_STATUS Status = EFI_SUCCESS;

for (BlockIndex = StartBlockIndex; BlockIndex <= EndBlockIndex; BlockIndex++) {
//For each block read number of pages
for (PageIndex = 0; PageIndex < gNandFlashInfo->NumPagesPerBlock; PageIndex++) {
 Status = NandReadPage(BlockIndex, PageIndex, Buffer, SpareBuffer);


 if (EFI_ERROR(Status)) {


   return Status;


 }


 Buffer = ((UINT8 *)Buffer + gNandFlashInfo->PageSize);


}
}

return Status;

-}



-EFI_STATUS
-NandWriteBlock (

IN UINTN                          StartBlockIndex,
IN UINTN                          EndBlockIndex,
OUT VOID                          *Buffer,
OUT VOID                          *SpareBuffer
)

-{

UINTN      BlockIndex;
UINTN      PageIndex;
EFI_STATUS Status = EFI_SUCCESS;

for (BlockIndex = StartBlockIndex; BlockIndex <= EndBlockIndex; BlockIndex++) {
//Page programming.
for (PageIndex = 0; PageIndex < gNandFlashInfo->NumPagesPerBlock; PageIndex++) {
 Status = NandWritePage(BlockIndex, PageIndex, Buffer, SpareBuffer);


 if (EFI_ERROR(Status)) {


   return Status;


 }


 Buffer = ((UINT8 *)Buffer + gNandFlashInfo->PageSize);


}
}

return Status;

-}



-EFI_STATUS
-EFIAPI
-NandFlashReset (

IN EFI_BLOCK_IO_PROTOCOL          *This,
IN BOOLEAN                        ExtendedVerification
)

-{

UINTN BusyStall = 50;                            // microSeconds
UINTN ResetBusyTimeout = (1000000 / BusyStall);  // 1 Second

//Send RESET command to device.
NandSendCommand(RESET_CMD);

//Wait for 1ms before we check status register.
gBS->Stall(1000);

//Check BIT#5 & BIT#6 in Status register to make sure RESET is done.
while ((NandReadStatus() & NAND_RESET_STATUS) != NAND_RESET_STATUS) {

//In case of extended verification, wait for extended amount of time
//to make sure device is reset.
if (ExtendedVerification) {
 if (ResetBusyTimeout == 0) {


   return EFI_DEVICE_ERROR;


 }



 gBS->Stall(BusyStall);


 ResetBusyTimeout--;


}
}

return EFI_SUCCESS;

-}



-EFI_STATUS
-EFIAPI
-NandFlashReadBlocks (

IN EFI_BLOCK_IO_PROTOCOL          *This,
IN UINT32                         MediaId,
IN EFI_LBA                        Lba,
IN UINTN                          BufferSize,
OUT VOID                          *Buffer
)

-{

UINTN      NumBlocks;
UINTN      EndBlockIndex;
EFI_STATUS Status;
UINT8      *SpareBuffer = NULL;

if (Buffer == NULL) {
Status = EFI_INVALID_PARAMETER;
goto exit;
}

if (Lba > LAST_BLOCK) {
Status = EFI_INVALID_PARAMETER;
goto exit;
}

if ((BufferSize % gNandFlashInfo->BlockSize) != 0) {
Status = EFI_BAD_BUFFER_SIZE;
goto exit;
}

NumBlocks = DivU64x32(BufferSize, gNandFlashInfo->BlockSize);
EndBlockIndex = ((UINTN)Lba + NumBlocks) - 1;

SpareBuffer = (UINT8 *)AllocatePool(gNandFlashInfo->SparePageSize);
if (SpareBuffer == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto exit;
}

//Read block
Status = NandReadBlock((UINTN)Lba, EndBlockIndex, Buffer, SpareBuffer);
if (EFI_ERROR(Status)) {
DEBUG((EFI_D_ERROR, "Read block fails: %x\n", Status));
goto exit;
}


-exit:

if (SpareBuffer != NULL) {
FreePool (SpareBuffer);
}

return Status;

-}



-EFI_STATUS
-EFIAPI
-NandFlashWriteBlocks (

IN EFI_BLOCK_IO_PROTOCOL          *This,
IN UINT32                         MediaId,
IN EFI_LBA                        Lba,
IN UINTN                          BufferSize,
IN VOID                           *Buffer
)

-{

UINTN      BlockIndex;
UINTN      NumBlocks;
UINTN      EndBlockIndex;
EFI_STATUS Status;
UINT8      *SpareBuffer = NULL;

if (Buffer == NULL) {
Status = EFI_INVALID_PARAMETER;
goto exit;
}

if (Lba > LAST_BLOCK) {
Status = EFI_INVALID_PARAMETER;
goto exit;
}

if ((BufferSize % gNandFlashInfo->BlockSize) != 0) {
Status = EFI_BAD_BUFFER_SIZE;
goto exit;
}

NumBlocks = DivU64x32(BufferSize, gNandFlashInfo->BlockSize);
EndBlockIndex = ((UINTN)Lba + NumBlocks) - 1;

SpareBuffer = (UINT8 *)AllocatePool(gNandFlashInfo->SparePageSize);
if (SpareBuffer == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto exit;
}

// Erase block
for (BlockIndex = (UINTN)Lba; BlockIndex <= EndBlockIndex; BlockIndex++) {
Status = NandEraseBlock(BlockIndex);
if (EFI_ERROR(Status)) {
 DEBUG((EFI_D_ERROR, "Erase block failed. Status: %x\n", Status));


 goto exit;


}
}

// Program data
Status = NandWriteBlock((UINTN)Lba, EndBlockIndex, Buffer, SpareBuffer);
if (EFI_ERROR(Status)) {
DEBUG((EFI_D_ERROR, "Block write fails: %x\n", Status));
goto exit;
}


-exit:

if (SpareBuffer != NULL) {
FreePool (SpareBuffer);
}

return Status;

-}



-EFI_STATUS
-EFIAPI
-NandFlashFlushBlocks (

IN EFI_BLOCK_IO_PROTOCOL  *This
)

-{

return EFI_SUCCESS;

-}





-EFI_BLOCK_IO_MEDIA gNandFlashMedia = {

SIGNATURE_32('n','a','n','d'),            // MediaId
FALSE,                                    // RemovableMedia
TRUE,                                     // MediaPresent
FALSE,                                    // LogicalPartition
FALSE,                                    // ReadOnly
FALSE,                                    // WriteCaching
0,                                        // BlockSize
2,                                        // IoAlign
0,                                        // Pad
0                                         // LastBlock

-};



-EFI_BLOCK_IO_PROTOCOL BlockIo =
-{

EFI_BLOCK_IO_INTERFACE_REVISION,  // Revision
&gNandFlashMedia,                  // *Media
NandFlashReset,                   // Reset
NandFlashReadBlocks,              // ReadBlocks
NandFlashWriteBlocks,             // WriteBlocks
NandFlashFlushBlocks              // FlushBlocks

-};



-EFI_STATUS
-NandFlashInitialize (

IN EFI_HANDLE         ImageHandle,
IN EFI_SYSTEM_TABLE   *SystemTable
)

-{

EFI_STATUS  Status;

gNandFlashInfo = (NAND_FLASH_INFO *)AllocateZeroPool (sizeof(NAND_FLASH_INFO));

//Initialize GPMC module.
GpmcInit();

//Reset NAND part
NandFlashReset(&BlockIo, FALSE);

//Detect NAND part and populate gNandFlashInfo structure
Status = NandDetectPart ();
if (EFI_ERROR(Status)) {
DEBUG((EFI_D_ERROR, "Nand part id detection failure: Status: %x\n", Status));
return Status;
}

//Count total number of 512Bytes chunk based on the page size.
if (gNandFlashInfo->PageSize == PAGE_SIZE_512B) {
gNum512BytesChunks = 1;
} else if (gNandFlashInfo->PageSize == PAGE_SIZE_2K) {
gNum512BytesChunks = 4;
} else if (gNandFlashInfo->PageSize == PAGE_SIZE_4K) {
gNum512BytesChunks = 8;
}

gEccCode = (UINT8 *)AllocatePool(gNum512BytesChunks * 3);
if (gEccCode == NULL) {
return EFI_OUT_OF_RESOURCES;
}

//Configure ECC
NandConfigureEcc ();

//Patch EFI_BLOCK_IO_MEDIA structure.
gNandFlashMedia.BlockSize = gNandFlashInfo->BlockSize;
gNandFlashMedia.LastBlock = LAST_BLOCK;

//Publish BlockIO.
Status = gBS->InstallMultipleProtocolInterfaces (
             &ImageHandle,


             &gEfiBlockIoProtocolGuid, &BlockIo,


             &gEfiDevicePathProtocolGuid, &gDevicePath,


             NULL


             );


return Status;

-}



diff --git a/Chips/TexasInstruments/Omap35xx/Flash/Flash.h b/Chips/TexasInstruments/Omap35xx/Flash/Flash.h
deleted file mode 100644
index 46ec4db9e183..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Flash/Flash.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef FLASH_H
-#define FLASH_H



-#include <Uefi.h>



-#include <Library/BaseLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/DebugLib.h>
-#include <Library/IoLib.h>
-#include <Library/PcdLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/IoLib.h>



-#include <Protocol/BlockIo.h>
-#include <Protocol/Cpu.h>
-#include <Omap3530/Omap3530.h>



-#define PAGE_SIZE(x)             ((x) & 0x01)
-#define PAGE_SIZE_2K_VAL         (0x01UL)



-#define SPARE_AREA_SIZE(x)       (((x) >> 2) & 0x01)
-#define SPARE_AREA_SIZE_64B_VAL  (0x1UL)



-#define BLOCK_SIZE(x)            (((x) >> 4) & 0x01)
-#define BLOCK_SIZE_128K_VAL      (0x01UL)



-#define ORGANIZATION(x)          (((x) >> 6) & 0x01)
-#define ORGANIZATION_X8          (0x0UL)
-#define ORGANIZATION_X16         (0x1UL)



-#define PAGE_SIZE_512B           (512)
-#define PAGE_SIZE_2K             (2048)
-#define PAGE_SIZE_4K             (4096)
-#define SPARE_AREA_SIZE_16B      (16)
-#define SPARE_AREA_SIZE_64B      (64)



-#define BLOCK_SIZE_16K           (16*1024)
-#define BLOCK_SIZE_128K          (128*1024)



-#define BLOCK_COUNT              (2048)
-#define LAST_BLOCK               (BLOCK_COUNT - 1)



-#define ECC_POSITION             2



-//List of commands.
-#define RESET_CMD                0xFF
-#define READ_ID_CMD              0x90



-#define READ_STATUS_CMD          0x70



-#define PAGE_READ_CMD            0x00
-#define PAGE_READ_CONFIRM_CMD    0x30



-#define BLOCK_ERASE_CMD          0x60
-#define BLOCK_ERASE_CONFIRM_CMD  0xD0



-#define PROGRAM_PAGE_CMD         0x80
-#define PROGRAM_PAGE_CONFIRM_CMD 0x10



-//Nand status register bit definition
-#define NAND_SUCCESS             (0x0UL << 0)
-#define NAND_FAILURE             BIT0



-#define NAND_BUSY                (0x0UL << 6)
-#define NAND_READY               BIT6



-#define NAND_RESET_STATUS        (0x60UL << 0)



-#define MAX_RETRY_COUNT          1500




-typedef struct {

UINT8 ManufactureId;
UINT8 DeviceId;
UINT8 BlockAddressStart; //Start of the Block address in actual NAND
UINT8 PageAddressStart;  //Start of the Page address in actual NAND

-} NAND_PART_INFO_TABLE;



-typedef struct {

UINT8     ManufactureId;
UINT8     DeviceId;
UINT8     Organization;      //x8 or x16
UINT32    PageSize;
UINT32    SparePageSize;
UINT32    BlockSize;
UINT32    NumPagesPerBlock;
UINT8     BlockAddressStart; //Start of the Block address in actual NAND
UINT8     PageAddressStart;  //Start of the Page address in actual NAND

-} NAND_FLASH_INFO;



-#endif //FLASH_H
diff --git a/Chips/TexasInstruments/Omap35xx/Flash/Flash.inf b/Chips/TexasInstruments/Omap35xx/Flash/Flash.inf
deleted file mode 100644
index 4d9b630b0adc..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Flash/Flash.inf
+++ /dev/null
@@ -1,48 +0,0 @@
-#/** @file
-#
-#  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = NandFlash
FILE_GUID                      = 4d00ef14-c4e0-426b-81b7-30a00a14aad6
MODULE_TYPE                    = DXE_DRIVER
VERSION_STRING                 = 1.0

ENTRY_POINT                    = NandFlashInitialize



-[Sources.common]

Flash.c


-[Packages]

MdePkg/MdePkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[LibraryClasses]

PcdLib
UefiLib
UefiDriverEntryPoint
MemoryAllocationLib
IoLib


-[Guids]



-[Protocols]

gEfiBlockIoProtocolGuid
gEfiCpuArchProtocolGuid


-[Pcd]

gOmap35xxTokenSpaceGuid.PcdOmap35xxGpmcOffset


-[depex]

TRUE

diff --git a/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.c b/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.c
deleted file mode 100644
index 4d713f7bf58d..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include <Uefi.h>



-#include <Library/IoLib.h>
-#include <Library/OmapLib.h>
-#include <Library/UefiBootServicesTableLib.h>



-#include <Protocol/EmbeddedGpio.h>



-#include <Omap3530/Omap3530.h>



-EFI_STATUS
-Get (

IN  EMBEDDED_GPIO     *This,
IN  EMBEDDED_GPIO_PIN Gpio,
OUT UINTN               *Value
)

-{

UINTN  Port;
UINTN  Pin;
UINT32 DataInRegister;

if (Value == NULL)
{
return EFI_UNSUPPORTED;
}

Port    = GPIO_PORT(Gpio);
Pin     = GPIO_PIN(Gpio);

DataInRegister = GpioBase(Port) + GPIO_DATAIN;

if (MmioRead32 (DataInRegister) & GPIO_DATAIN_MASK(Pin)) {
*Value = 1;
} else {
*Value = 0;
}

return EFI_SUCCESS;

-}



-EFI_STATUS
-Set (

IN  EMBEDDED_GPIO       *This,
IN  EMBEDDED_GPIO_PIN   Gpio,
IN  EMBEDDED_GPIO_MODE  Mode
)

-{

UINTN  Port;
UINTN  Pin;
UINT32 OutputEnableRegister;
UINT32 SetDataOutRegister;
UINT32 ClearDataOutRegister;

Port    = GPIO_PORT(Gpio);
Pin     = GPIO_PIN(Gpio);

OutputEnableRegister = GpioBase(Port) + GPIO_OE;
SetDataOutRegister   = GpioBase(Port) + GPIO_SETDATAOUT;
ClearDataOutRegister = GpioBase(Port) + GPIO_CLEARDATAOUT;

switch (Mode)
{
case GPIO_MODE_INPUT:
 MmioAndThenOr32(OutputEnableRegister, ~GPIO_OE_MASK(Pin), GPIO_OE_INPUT(Pin));


 break;



case GPIO_MODE_OUTPUT_0:
 MmioWrite32 (ClearDataOutRegister, GPIO_CLEARDATAOUT_BIT(Pin));


 MmioAndThenOr32(OutputEnableRegister, ~GPIO_OE_MASK(Pin), GPIO_OE_OUTPUT(Pin));


 break;



case GPIO_MODE_OUTPUT_1:
 MmioWrite32 (SetDataOutRegister, GPIO_SETDATAOUT_BIT(Pin));


 MmioAndThenOr32(OutputEnableRegister, ~GPIO_OE_MASK(Pin), GPIO_OE_OUTPUT(Pin));


 break;



default:
 return EFI_UNSUPPORTED;


}

return EFI_SUCCESS;

-}



-EFI_STATUS
-GetMode (

IN  EMBEDDED_GPIO       *This,
IN  EMBEDDED_GPIO_PIN   Gpio,
OUT EMBEDDED_GPIO_MODE  *Mode
)

-{

return EFI_UNSUPPORTED;

-}



-EFI_STATUS
-SetPull (

IN  EMBEDDED_GPIO       *This,
IN  EMBEDDED_GPIO_PIN   Gpio,
IN  EMBEDDED_GPIO_PULL  Direction
)

-{

return EFI_UNSUPPORTED;

-}



-EMBEDDED_GPIO Gpio = {

Get,
Set,
GetMode,
SetPull

-};



-EFI_STATUS
-GpioInitialize (

IN EFI_HANDLE         ImageHandle,
IN EFI_SYSTEM_TABLE   *SystemTable
)

-{

EFI_STATUS  Status;

Status = gBS->InstallMultipleProtocolInterfaces(&ImageHandle, &gEmbeddedGpioProtocolGuid, &Gpio, NULL);
return Status;

-}
diff --git a/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf b/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf
deleted file mode 100644
index 62073ff58c31..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf
+++ /dev/null
@@ -1,45 +0,0 @@
-#/** @file
-#
-#  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = Gpio
FILE_GUID                      = E7D9CAE1-6930-46E3-BDF9-0027446E7DF2
MODULE_TYPE                    = DXE_DRIVER
VERSION_STRING                 = 1.0

ENTRY_POINT                    = GpioInitialize



-[Sources.common]

Gpio.c


-[Packages]

MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[LibraryClasses]

IoLib
UefiDriverEntryPoint
OmapLib


-[Guids]



-[Protocols]

gEmbeddedGpioProtocolGuid


-[Pcd]



-[depex]

TRUE

diff --git a/Chips/TexasInstruments/Omap35xx/Include/Library/OmapDmaLib.h b/Chips/TexasInstruments/Omap35xx/Include/Library/OmapDmaLib.h
deleted file mode 100755
index dfac36f07e98..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Library/OmapDmaLib.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/** @file


Abstractions for simple OMAP DMA.
OMAP_DMA4 structure elements are described in the OMAP35xx TRM.

Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP_DMA_LIB_H__
-#define __OMAP_DMA_LIB_H__




-// Example from DMA chapter of the OMAP35xx spec
-typedef struct {

UINT8     DataType;                      // DMA4_CSDPi[1:0]
UINT8     ReadPortAccessType;            // DMA4_CSDPi[8:7]
UINT8     WritePortAccessType;           // DMA4_CSDPi[15:14]
UINT8     SourceEndiansim;               // DMA4_CSDPi[21]
UINT8     DestinationEndianism;          // DMA4_CSDPi[19]
UINT8     WriteMode;                     // DMA4_CSDPi[17:16]
UINT8     SourcePacked;                  // DMA4_CSDPi[6]
UINT8     DestinationPacked;             // DMA4_CSDPi[13]
UINT32    NumberOfElementPerFrame;       // DMA4_CENi
UINT32    NumberOfFramePerTransferBlock; // DMA4_CFNi
UINT32    SourceStartAddress;            // DMA4_CSSAi
UINT32    DestinationStartAddress;       // DMA4_CDSAi
UINT32    SourceElementIndex;            // DMA4_CSEi
UINT32    SourceFrameIndex;              // DMA4_CSFi
UINT32    DestinationElementIndex;       // DMA4_CDEi
UINT32    DestinationFrameIndex;         // DMA4_CDFi
UINT8     ReadPortAccessMode;            // DMA4_CCRi[13:12]
UINT8     WritePortAccessMode;           // DMA4_CCRi[15:14]
UINT8     ReadPriority;                  // DMA4_CCRi[6]
UINT8     WritePriority;                 // DMA4_CCRi[23]
UINT8     ReadRequestNumber;             // DMA4_CCRi[4:0]
UINT8     WriteRequestNumber;            // DMA4_CCRi[20:19]

-} OMAP_DMA4;




-/**

Configure OMAP DMA Channel

@param  Channel               DMA Channel to configure
@param  Dma4                  Pointer to structure used to initialize DMA registers for the Channel

@retval EFI_SUCCESS           The range was mapped for the returned NumberOfBytes.
@retval EFI_INVALID_PARAMETER Channel is not valid
@retval EFI_DEVICE_ERROR      The system hardware could not map the requested information.


-**/
-EFI_STATUS
-EFIAPI
-EnableDmaChannel (

IN  UINTN       Channel,
IN  OMAP_DMA4   *Dma4
);


-/**

Turn of DMA channel configured by EnableDma().

@param  Channel               DMA Channel to configure
@param  SuccesMask            Bits in DMA4_CSR register indicate EFI_SUCCESS
@param  ErrorMask             Bits in DMA4_CSR register indicate EFI_DEVICE_ERROR

@retval EFI_SUCCESS           DMA hardware disabled
@retval EFI_INVALID_PARAMETER Channel is not valid
@retval EFI_DEVICE_ERROR      The system hardware could not map the requested information.


-**/
-EFI_STATUS
-EFIAPI
-DisableDmaChannel (

IN  UINTN       Channel,
IN  UINT32      SuccessMask,
IN  UINT32      ErrorMask
);




-#endif



diff --git a/Chips/TexasInstruments/Omap35xx/Include/Library/OmapLib.h b/Chips/TexasInstruments/Omap35xx/Include/Library/OmapLib.h
deleted file mode 100644
index ec14603ccd82..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Library/OmapLib.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/** @file


Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAPLIB_H__
-#define __OMAPLIB_H__



-UINT32
-EFIAPI
-GpioBase (

IN  UINTN Port
);


-UINT32
-EFIAPI
-TimerBase (

IN  UINTN Timer
);


-UINTN
-EFIAPI
-InterruptVectorForTimer (

IN  UINTN TImer
);


-UINT32
-EFIAPI
-UartBase (

IN  UINTN Uart
);



-#endif // __OMAPLIB_H__



diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530.h
deleted file mode 100644
index 4d3781576493..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP3530_H__
-#define __OMAP3530_H__



-#include "Omap3530Gpio.h"
-#include "Omap3530Interrupt.h"
-#include "Omap3530Prcm.h"
-#include "Omap3530Timer.h"
-#include "Omap3530Uart.h"
-#include "Omap3530Usb.h"
-#include "Omap3530MMCHS.h"
-#include "Omap3530I2c.h"
-#include "Omap3530PadConfiguration.h"
-#include "Omap3530Gpmc.h"
-#include "Omap3530Dma.h"




-//CONTROL_PBIAS_LITE
-#define CONTROL_PBIAS_LITE    0x48002520
-#define PBIASLITEVMODE0       BIT0
-#define PBIASLITEPWRDNZ0      BIT1
-#define PBIASSPEEDCTRL0       BIT2
-#define PBIASLITEVMODE1       BIT8
-#define PBIASLITEWRDNZ1       BIT9



-#endif // __OMAP3530_H__



diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Dma.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Dma.h
deleted file mode 100755
index a6e070dda370..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Dma.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/** @file


Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP3530DMA_H__
-#define __OMAP3530DMA_H__




-#define DMA4_MAX_CHANNEL 31



-#define DMA4_IRQENABLE_L(_i)  (0x48056018 + (0x4*(_i)))



-#define DMA4_CCR(_i)  (0x48056080 + (0x60*(_i)))
-#define DMA4_CICR(_i) (0x48056088 + (0x60*(_i)))
-#define DMA4_CSR(_i)  (0x4805608c + (0x60*(_i)))
-#define DMA4_CSDP(_i) (0x48056090 + (0x60*(_i)))
-#define DMA4_CEN(_i)  (0x48056094 + (0x60*(_i)))
-#define DMA4_CFN(_i)  (0x48056098 + (0x60*(_i)))
-#define DMA4_CSSA(_i) (0x4805609c + (0x60*(_i)))
-#define DMA4_CDSA(_i) (0x480560a0 + (0x60*(_i)))
-#define DMA4_CSEI(_i) (0x480560a4 + (0x60*(_i)))
-#define DMA4_CSFI(_i) (0x480560a8 + (0x60*(_i)))
-#define DMA4_CDEI(_i) (0x480560ac + (0x60*(_i)))
-#define DMA4_CDFI(_i) (0x480560b0 + (0x60*(_i)))



-#define DMA4_GCR      (0x48056078)



-// Channel Source Destination parameters
-#define DMA4_CSDP_DATA_TYPE8    0
-#define DMA4_CSDP_DATA_TYPE16   1
-#define DMA4_CSDP_DATA_TYPE32   2



-#define DMA4_CSDP_SRC_PACKED      BIT6
-#define DMA4_CSDP_SRC_NONPACKED   0



-#define DMA4_CSDP_SRC_BURST_EN    (0x0 << 7)
-#define DMA4_CSDP_SRC_BURST_EN16  (0x1 << 7)
-#define DMA4_CSDP_SRC_BURST_EN32  (0x2 << 7)
-#define DMA4_CSDP_SRC_BURST_EN64  (0x3 << 7)



-#define DMA4_CSDP_DST_PACKED      BIT13
-#define DMA4_CSDP_DST_NONPACKED   0



-#define DMA4_CSDP_BURST_EN        (0x0 << 14)
-#define DMA4_CSDP_BURST_EN16      (0x1 << 14)
-#define DMA4_CSDP_BURST_EN32      (0x2 << 14)
-#define DMA4_CSDP_BURST_EN64      (0x3 << 14)



-#define DMA4_CSDP_WRITE_MODE_NONE_POSTED      (0x0 << 16)
-#define DMA4_CSDP_WRITE_MODE_POSTED           (0x1 << 16)
-#define DMA4_CSDP_WRITE_MODE_LAST_NON_POSTED  (0x2 << 16)



-#define DMA4_CSDP_DST_ENDIAN_LOCK_LOCK    BIT18
-#define DMA4_CSDP_DST_ENDIAN_LOCK_ADAPT   0



-#define DMA4_CSDP_DST_ENDIAN_BIG          BIT19
-#define DMA4_CSDP_DST_ENDIAN_LITTLE       0



-#define DMA4_CSDP_SRC_ENDIAN_LOCK_LOCK    BIT20
-#define DMA4_CSDP_SRC_ENDIAN_LOCK_ADAPT   0



-#define DMA4_CSDP_SRC_ENDIAN_BIG          BIT21
-#define DMA4_CSDP_SRC_ENDIAN_LITTLE       0



-// Channel Control
-#define DMA4_CCR_SYNCHRO_CONTROL_MASK     0x1f



-#define DMA4_CCR_FS_ELEMENT     (0    | 0)
-#define DMA4_CCR_FS_BLOCK       (0    | BIT18)
-#define DMA4_CCR_FS_FRAME       (BIT5 | 0)
-#define DMA4_CCR_FS_PACKET      (BIT5 | BIT18)



-#define DMA4_CCR_READ_PRIORITY_HIGH   BIT6
-#define DMA4_CCR_READ_PRIORITY_LOW    0



-#define DMA4_CCR_ENABLE               BIT7
-#define DMA4_CCR_DISABLE              0



-#define DMA4_CCR_SUSPEND_SENSITIVE_IGNORE BIT8
-#define DMA4_CCR_SUSPEND_SENSITIVE        0



-#define DMA4_CCR_RD_ACTIVE                BIT9
-#define DMA4_CCR_WR_ACTIVE                BIT10



-#define DMA4_CCR_SRC_AMODE                (0     | 0)
-#define DMA4_CCR_SRC_AMODE_POST_INC       (0     | BIT12)
-#define DMA4_CCR_SRC_AMODE_SINGLE_INDEX   (BIT13 | 0)
-#define DMA4_CCR_SRC_AMODE_DOUBLE_INDEX   (BIT13 | BIT12)



-#define DMA4_CCR_DST_AMODE                (0     | 0)
-#define DMA4_CCR_DST_AMODE_POST_INC       (0     | BIT14)
-#define DMA4_CCR_DST_AMODE_SINGLE_INDEX   (BIT15 | 0)
-#define DMA4_CCR_DST_AMODE_DOUBLE_INDEX   (BIT15 | BIT14)



-#define DMA4_CCR_CONST_FILL_ENABLE        BIT16
-#define DMA4_CCR_TRANSPARENT_COPY_ENABLE  BIT17



-#define DMA4_CCR_SEL_SRC_DEST_SYNC_SOURCE BIT24



-#define DMA4_CSR_DROP                     BIT1
-#define DMA4_CSR_HALF                     BIT2
-#define DMA4_CSR_FRAME                    BIT3
-#define DMA4_CSR_LAST                     BIT4
-#define DMA4_CSR_BLOCK                    BIT5
-#define DMA4_CSR_SYNC                     BIT6
-#define DMA4_CSR_PKT                      BIT7
-#define DMA4_CSR_TRANS_ERR                BIT8
-#define DMA4_CSR_SECURE_ERR               BIT9
-#define DMA4_CSR_SUPERVISOR_ERR           BIT10
-#define DMA4_CSR_MISALIGNED_ADRS_ERR      BIT11
-#define DMA4_CSR_DRAIN_END                BIT12
-#define DMA4_CSR_RESET                    0x1FE
-#define DMA4_CSR_ERR                      (DMA4_CSR_TRANS_ERR | DMA4_CSR_SECURE_ERR | DMA4_CSR_SUPERVISOR_ERR | DMA4_CSR_MISALIGNED_ADRS_ERR)



-// same mapping as CSR except for SYNC. Enable all since we are polling
-#define DMA4_CICR_ENABLE_ALL              0x1FBE




-#endif



diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpio.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpio.h
deleted file mode 100644
index e45a0f23b5ea..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpio.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP3530GPIO_H__
-#define __OMAP3530GPIO_H__



-#define GPIO1_BASE (0x48310000)
-#define GPIO2_BASE (0x49050000)
-#define GPIO3_BASE (0x49052000)
-#define GPIO4_BASE (0x49054000)
-#define GPIO5_BASE (0x49056000)
-#define GPIO6_BASE (0x49058000)



-#define GPIO_SYSCONFIG        (0x0010)
-#define GPIO_SYSSTATUS        (0x0014)
-#define GPIO_IRQSTATUS1       (0x0018)
-#define GPIO_IRQENABLE1       (0x001C)
-#define GPIO_WAKEUPENABLE     (0x0020)
-#define GPIO_IRQSTATUS2       (0x0028)
-#define GPIO_IRQENABLE2       (0x002C)
-#define GPIO_CTRL             (0x0030)
-#define GPIO_OE               (0x0034)
-#define GPIO_DATAIN           (0x0038)
-#define GPIO_DATAOUT          (0x003C)
-#define GPIO_LEVELDETECT0     (0x0040)
-#define GPIO_LEVELDETECT1     (0x0044)
-#define GPIO_RISINGDETECT     (0x0048)
-#define GPIO_FALLINGDETECT    (0x004C)
-#define GPIO_DEBOUNCENABLE    (0x0050)
-#define GPIO_DEBOUNCINGTIME   (0x0054)
-#define GPIO_CLEARIRQENABLE1  (0x0060)
-#define GPIO_SETIRQENABLE1    (0x0064)
-#define GPIO_CLEARIRQENABLE2  (0x0070)
-#define GPIO_SETIRQENABLE2    (0x0074)
-#define GPIO_CLEARWKUENA      (0x0080)
-#define GPIO_SETWKUENA        (0x0084)
-#define GPIO_CLEARDATAOUT     (0x0090)
-#define GPIO_SETDATAOUT       (0x0094)



-#define GPIO_SYSCONFIG_IDLEMODE_MASK      (3UL << 3)
-#define GPIO_SYSCONFIG_IDLEMODE_FORCE     (0UL << 3)
-#define GPIO_SYSCONFIG_IDLEMODE_NONE      BIT3
-#define GPIO_SYSCONFIG_IDLEMODE_SMART     (2UL << 3)
-#define GPIO_SYSCONFIG_ENAWAKEUP_MASK     BIT2
-#define GPIO_SYSCONFIG_ENAWAKEUP_DISABLE  (0UL << 2)
-#define GPIO_SYSCONFIG_ENAWAKEUP_ENABLE   BIT2
-#define GPIO_SYSCONFIG_SOFTRESET_MASK     BIT1
-#define GPIO_SYSCONFIG_SOFTRESET_NORMAL   (0UL << 1)
-#define GPIO_SYSCONFIG_SOFTRESET_RESET    BIT1
-#define GPIO_SYSCONFIG_AUTOIDLE_MASK      BIT0
-#define GPIO_SYSCONFIG_AUTOIDLE_FREE_RUN  (0UL << 0)
-#define GPIO_SYSCONFIG_AUTOIDLE_ON        BIT0



-#define GPIO_SYSSTATUS_RESETDONE_MASK     BIT0
-#define GPIO_SYSSTATUS_RESETDONE_ONGOING  (0UL << 0)
-#define GPIO_SYSSTATUS_RESETDONE_COMPLETE BIT0



-#define GPIO_IRQSTATUS_MASK(x)            (1UL << (x))
-#define GPIO_IRQSTATUS_NOT_TRIGGERED(x)   (0UL << (x))
-#define GPIO_IRQSTATUS_TRIGGERED(x)       (1UL << (x))
-#define GPIO_IRQSTATUS_CLEAR(x)           (1UL << (x))



-#define GPIO_IRQENABLE_MASK(x)            (1UL << (x))
-#define GPIO_IRQENABLE_DISABLE(x)         (0UL << (x))
-#define GPIO_IRQENABLE_ENABLE(x)          (1UL << (x))



-#define GPIO_WAKEUPENABLE_MASK(x)         (1UL << (x))
-#define GPIO_WAKEUPENABLE_DISABLE(x)      (0UL << (x))
-#define GPIO_WAKEUPENABLE_ENABLE(x)       (1UL << (x))



-#define GPIO_CTRL_GATINGRATIO_MASK        (3UL << 1)
-#define GPIO_CTRL_GATINGRATIO_DIV_1       (0UL << 1)
-#define GPIO_CTRL_GATINGRATIO_DIV_2       BIT1
-#define GPIO_CTRL_GATINGRATIO_DIV_4       (2UL << 1)
-#define GPIO_CTRL_GATINGRATIO_DIV_8       (3UL << 1)
-#define GPIO_CTRL_DISABLEMODULE_MASK      BIT0
-#define GPIO_CTRL_DISABLEMODULE_ENABLE    (0UL << 0)
-#define GPIO_CTRL_DISABLEMODULE_DISABLE   BIT0



-#define GPIO_OE_MASK(x)                   (1UL << (x))
-#define GPIO_OE_OUTPUT(x)                 (0UL << (x))
-#define GPIO_OE_INPUT(x)                  (1UL << (x))



-#define GPIO_DATAIN_MASK(x)               (1UL << (x))



-#define GPIO_DATAOUT_MASK(x)              (1UL << (x))



-#define GPIO_LEVELDETECT_MASK(x)          (1UL << (x))
-#define GPIO_LEVELDETECT_DISABLE(x)       (0UL << (x))
-#define GPIO_LEVELDETECT_ENABLE(x)        (1UL << (x))



-#define GPIO_RISINGDETECT_MASK(x)         (1UL << (x))
-#define GPIO_RISINGDETECT_DISABLE(x)      (0UL << (x))
-#define GPIO_RISINGDETECT_ENABLE(x)       (1UL << (x))



-#define GPIO_FALLINGDETECT_MASK(x)        (1UL << (x))
-#define GPIO_FALLINGDETECT_DISABLE(x)     (0UL << (x))
-#define GPIO_FALLINGDETECT_ENABLE(x)      (1UL << (x))



-#define GPIO_DEBOUNCENABLE_MASK(x)        (1UL << (x))
-#define GPIO_DEBOUNCENABLE_DISABLE(x)     (0UL << (x))
-#define GPIO_DEBOUNCENABLE_ENABLE(x)      (1UL << (x))



-#define GPIO_DEBOUNCINGTIME_MASK          (0xFF)
-#define GPIO_DEBOUNCINGTIME_US(x)         ((((x) / 31) - 1) & GPIO_DEBOUNCINGTIME_MASK)



-#define GPIO_CLEARIRQENABLE_BIT(x)        (1UL << (x))



-#define GPIO_SETIRQENABLE_BIT(x)          (1UL << (x))



-#define GPIO_CLEARWKUENA_BIT(x)           (1UL << (x))



-#define GPIO_SETWKUENA_BIT(x)             (1UL << (x))



-#define GPIO_CLEARDATAOUT_BIT(x)          (1UL << (x))



-#define GPIO_SETDATAOUT_BIT(x)            (1UL << (x))



-#endif // __OMAP3530GPIO_H__



diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpmc.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpmc.h
deleted file mode 100644
index 6943d303ec63..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Gpmc.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP3530GPMC_H__
-#define __OMAP3530GPMC_H__



-#define GPMC_BASE             (0x6E000000)



-//GPMC NAND definitions.
-#define GPMC_SYSCONFIG        (GPMC_BASE + 0x10)
-#define SMARTIDLEMODE         (0x2UL << 3)



-#define GPMC_SYSSTATUS        (GPMC_BASE + 0x14)
-#define GPMC_IRQSTATUS        (GPMC_BASE + 0x18)
-#define GPMC_IRQENABLE        (GPMC_BASE + 0x1C)



-#define GPMC_TIMEOUT_CONTROL  (GPMC_BASE + 0x40)
-#define TIMEOUTENABLE         BIT0
-#define TIMEOUTDISABLE        (0x0UL << 0)



-#define GPMC_ERR_ADDRESS      (GPMC_BASE + 0x44)
-#define GPMC_ERR_TYPE         (GPMC_BASE + 0x48)



-#define GPMC_CONFIG           (GPMC_BASE + 0x50)
-#define WRITEPROTECT_HIGH     BIT4
-#define WRITEPROTECT_LOW      (0x0UL << 4)



-#define GPMC_STATUS           (GPMC_BASE + 0x54)



-#define GPMC_CONFIG1_0        (GPMC_BASE + 0x60)
-#define DEVICETYPE_NOR        (0x0UL << 10)
-#define DEVICETYPE_NAND       (0x2UL << 10)
-#define DEVICESIZE_X8         (0x0UL << 12)
-#define DEVICESIZE_X16        BIT12



-#define GPMC_CONFIG2_0        (GPMC_BASE + 0x64)
-#define CSONTIME              (0x0UL << 0)
-#define CSRDOFFTIME           (0x14UL << 8)
-#define CSWROFFTIME           (0x14UL << 16)



-#define GPMC_CONFIG3_0        (GPMC_BASE + 0x68)
-#define ADVRDOFFTIME          (0x14UL << 8)
-#define ADVWROFFTIME          (0x14UL << 16)



-#define GPMC_CONFIG4_0        (GPMC_BASE + 0x6C)
-#define OEONTIME              BIT0
-#define OEOFFTIME             (0xFUL << 8)
-#define WEONTIME              BIT16
-#define WEOFFTIME             (0xFUL << 24)



-#define GPMC_CONFIG5_0        (GPMC_BASE + 0x70)
-#define RDCYCLETIME           (0x14UL << 0)
-#define WRCYCLETIME           (0x14UL << 8)
-#define RDACCESSTIME          (0xCUL << 16)
-#define PAGEBURSTACCESSTIME   BIT24



-#define GPMC_CONFIG6_0        (GPMC_BASE + 0x74)
-#define CYCLE2CYCLESAMECSEN   BIT7
-#define CYCLE2CYCLEDELAY      (0xAUL << 8)
-#define WRDATAONADMUXBUS      (0xFUL << 16)
-#define WRACCESSTIME          BIT24



-#define GPMC_CONFIG7_0        (GPMC_BASE + 0x78)
-#define BASEADDRESS           (0x30UL << 0)
-#define CSVALID               BIT6
-#define MASKADDRESS_128MB     (0x8UL << 8)



-#define GPMC_NAND_COMMAND_0   (GPMC_BASE + 0x7C)
-#define GPMC_NAND_ADDRESS_0   (GPMC_BASE + 0x80)
-#define GPMC_NAND_DATA_0      (GPMC_BASE + 0x84)



-#define GPMC_ECC_CONFIG       (GPMC_BASE + 0x1F4)
-#define ECCENABLE             BIT0
-#define ECCDISABLE            (0x0UL << 0)
-#define ECCCS_0               (0x0UL << 1)
-#define ECC16B                BIT7



-#define GPMC_ECC_CONTROL      (GPMC_BASE + 0x1F8)
-#define ECCPOINTER_REG1       BIT0
-#define ECCCLEAR              BIT8



-#define GPMC_ECC_SIZE_CONFIG  (GPMC_BASE + 0x1FC)
-#define ECCSIZE0_512BYTES     (0xFFUL << 12)
-#define ECCSIZE1_512BYTES     (0xFFUL << 22)



-#define GPMC_ECC1_RESULT      (GPMC_BASE + 0x200)
-#define GPMC_ECC2_RESULT      (GPMC_BASE + 0x204)
-#define GPMC_ECC3_RESULT      (GPMC_BASE + 0x208)
-#define GPMC_ECC4_RESULT      (GPMC_BASE + 0x20C)
-#define GPMC_ECC5_RESULT      (GPMC_BASE + 0x210)
-#define GPMC_ECC6_RESULT      (GPMC_BASE + 0x214)
-#define GPMC_ECC7_RESULT      (GPMC_BASE + 0x218)
-#define GPMC_ECC8_RESULT      (GPMC_BASE + 0x21C)
-#define GPMC_ECC9_RESULT      (GPMC_BASE + 0x220)



-#endif //__OMAP3530GPMC_H__
diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530I2c.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530I2c.h
deleted file mode 100644
index 31d4d5ea6403..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530I2c.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP3530I2C_H__
-#define __OMAP3530I2C_H__



-//I2C register definitions.
-#define I2C1BASE        0x48070000



-#define I2C_IE          (I2C1BASE + 0x4)
-#define XRDY_IE         BIT4
-#define RRDY_IE         BIT3
-#define ARDY_IE         BIT2
-#define NACK_IE         BIT1



-#define I2C_STAT        (I2C1BASE + 0x8)
-#define BB              BIT12
-#define XRDY            BIT4
-#define RRDY            BIT3
-#define ARDY            BIT2
-#define NACK            BIT1



-#define I2C_WE          (I2C1BASE + 0xC)
-#define I2C_SYSS        (I2C1BASE + 0x10)
-#define I2C_BUF         (I2C1BASE + 0x14)
-#define I2C_CNT         (I2C1BASE + 0x18)
-#define I2C_DATA        (I2C1BASE + 0x1C)
-#define I2C_SYSC        (I2C1BASE + 0x20)



-#define I2C_CON         (I2C1BASE + 0x24)
-#define STT             BIT0
-#define STP             BIT1
-#define XSA             BIT8
-#define TRX             BIT9
-#define MST             BIT10
-#define I2C_EN          BIT15



-#define I2C_OA0         (I2C1BASE + 0x28)
-#define I2C_SA          (I2C1BASE + 0x2C)
-#define I2C_PSC         (I2C1BASE + 0x30)
-#define I2C_SCLL        (I2C1BASE + 0x34)
-#define I2C_SCLH        (I2C1BASE + 0x38)
-#define I2C_SYSTEST     (I2C1BASE + 0x3C)
-#define I2C_BUFSTAT     (I2C1BASE + 0x40)
-#define I2C_OA1         (I2C1BASE + 0x44)
-#define I2C_OA2         (I2C1BASE + 0x48)
-#define I2C_OA3         (I2C1BASE + 0x4C)
-#define I2C_ACTOA       (I2C1BASE + 0x50)
-#define I2C_SBLOCK      (I2C1BASE + 0x54)



-#endif //__OMAP3530I2C_H__
diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Interrupt.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Interrupt.h
deleted file mode 100644
index 774d8730153d..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Interrupt.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP3530INTERRUPT_H__
-#define __OMAP3530INTERRUPT_H__



-#define INTERRUPT_BASE (0x48200000)



-#define INT_NROF_VECTORS      (96)
-#define MAX_VECTOR            (INT_NROF_VECTORS - 1)
-#define INTCPS_SYSCONFIG      (INTERRUPT_BASE + 0x0010)
-#define INTCPS_SYSSTATUS      (INTERRUPT_BASE + 0x0014)
-#define INTCPS_SIR_IRQ        (INTERRUPT_BASE + 0x0040)
-#define INTCPS_SIR_IFQ        (INTERRUPT_BASE + 0x0044)
-#define INTCPS_CONTROL        (INTERRUPT_BASE + 0x0048)
-#define INTCPS_PROTECTION     (INTERRUPT_BASE + 0x004C)
-#define INTCPS_IDLE           (INTERRUPT_BASE + 0x0050)
-#define INTCPS_IRQ_PRIORITY   (INTERRUPT_BASE + 0x0060)
-#define INTCPS_FIQ_PRIORITY   (INTERRUPT_BASE + 0x0064)
-#define INTCPS_THRESHOLD      (INTERRUPT_BASE + 0x0068)
-#define INTCPS_ITR(n)         (INTERRUPT_BASE + 0x0080 + (0x20 * (n)))
-#define INTCPS_MIR(n)         (INTERRUPT_BASE + 0x0084 + (0x20 * (n)))
-#define INTCPS_MIR_CLEAR(n)   (INTERRUPT_BASE + 0x0088 + (0x20 * (n)))
-#define INTCPS_MIR_SET(n)     (INTERRUPT_BASE + 0x008C + (0x20 * (n)))
-#define INTCPS_ISR_SET(n)     (INTERRUPT_BASE + 0x0090 + (0x20 * (n)))
-#define INTCPS_ISR_CLEAR(n)   (INTERRUPT_BASE + 0x0094 + (0x20 * (n)))
-#define INTCPS_PENDING_IRQ(n) (INTERRUPT_BASE + 0x0098 + (0x20 * (n)))
-#define INTCPS_PENDING_FIQ(n) (INTERRUPT_BASE + 0x009C + (0x20 * (n)))
-#define INTCPS_ILR(m)         (INTERRUPT_BASE + 0x0100 + (0x04 * (m)))



-#define INTCPS_ILR_FIQ            BIT0
-#define INTCPS_SIR_IRQ_MASK       (0x7F)
-#define INTCPS_CONTROL_NEWIRQAGR  BIT0
-#define INTCPS_CONTROL_NEWFIQAGR  BIT1



-#endif // __OMAP3530INTERRUPT_H__



diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530MMCHS.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530MMCHS.h
deleted file mode 100644
index 88b43de48085..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530MMCHS.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP3530SDIO_H__
-#define __OMAP3530SDIO_H__



-//MMC/SD/SDIO1 register definitions.
-#define MMCHS1BASE        0x4809C000
-#define MMC_REFERENCE_CLK (96000000)



-#define MMCHS_SYSCONFIG   (MMCHS1BASE + 0x10)
-#define SOFTRESET         BIT1
-#define ENAWAKEUP         BIT2



-#define MMCHS_SYSSTATUS   (MMCHS1BASE + 0x14)
-#define RESETDONE_MASK    BIT0
-#define RESETDONE         BIT0



-#define MMCHS_CSRE        (MMCHS1BASE + 0x24)
-#define MMCHS_SYSTEST     (MMCHS1BASE + 0x28)



-#define MMCHS_CON         (MMCHS1BASE + 0x2C)
-#define OD                BIT0
-#define NOINIT            (0x0UL << 1)
-#define INIT              BIT1
-#define HR                BIT2
-#define STR               BIT3
-#define MODE              BIT4
-#define DW8_1_4_BIT       (0x0UL << 5)
-#define DW8_8_BIT         BIT5
-#define MIT               BIT6
-#define CDP               BIT7
-#define WPP               BIT8
-#define CTPL              BIT11
-#define CEATA_OFF         (0x0UL << 12)
-#define CEATA_ON          BIT12



-#define MMCHS_PWCNT       (MMCHS1BASE + 0x30)



-#define MMCHS_BLK         (MMCHS1BASE + 0x104)
-#define BLEN_512BYTES     (0x200UL << 0)



-#define MMCHS_ARG         (MMCHS1BASE + 0x108)



-#define MMCHS_CMD         (MMCHS1BASE + 0x10C)
-#define DE_ENABLE         BIT0
-#define BCE_ENABLE        BIT1
-#define ACEN_ENABLE       BIT2
-#define DDIR_READ         BIT4
-#define DDIR_WRITE        (0x0UL << 4)
-#define MSBS_SGLEBLK      (0x0UL << 5)
-#define MSBS_MULTBLK      BIT5
-#define RSP_TYPE_MASK     (0x3UL << 16)
-#define RSP_TYPE_136BITS  BIT16
-#define RSP_TYPE_48BITS   (0x2UL << 16)
-#define CCCE_ENABLE       BIT19
-#define CICE_ENABLE       BIT20
-#define DP_ENABLE         BIT21
-#define INDX(CMD_INDX)    ((CMD_INDX & 0x3F) << 24)



-#define MMCHS_RSP10       (MMCHS1BASE + 0x110)
-#define MMCHS_RSP32       (MMCHS1BASE + 0x114)
-#define MMCHS_RSP54       (MMCHS1BASE + 0x118)
-#define MMCHS_RSP76       (MMCHS1BASE + 0x11C)
-#define MMCHS_DATA        (MMCHS1BASE + 0x120)



-#define MMCHS_PSTATE      (MMCHS1BASE + 0x124)
-#define CMDI_MASK         BIT0
-#define CMDI_ALLOWED      (0x0UL << 0)
-#define CMDI_NOT_ALLOWED  BIT0
-#define DATI_MASK         BIT1
-#define DATI_ALLOWED      (0x0UL << 1)
-#define DATI_NOT_ALLOWED  BIT1



-#define MMCHS_HCTL        (MMCHS1BASE + 0x128)
-#define DTW_1_BIT         (0x0UL << 1)
-#define DTW_4_BIT         BIT1
-#define SDBP_MASK         BIT8
-#define SDBP_OFF          (0x0UL << 8)
-#define SDBP_ON           BIT8
-#define SDVS_1_8_V        (0x5UL << 9)
-#define SDVS_3_0_V        (0x6UL << 9)
-#define IWE               BIT24



-#define MMCHS_SYSCTL      (MMCHS1BASE + 0x12C)
-#define ICE               BIT0
-#define ICS_MASK          BIT1
-#define ICS               BIT1
-#define CEN               BIT2
-#define CLKD_MASK         (0x3FFUL << 6)
-#define CLKD_80KHZ        (0x258UL) //(96*1000/80)/2
-#define CLKD_400KHZ       (0xF0UL)
-#define DTO_MASK          (0xFUL << 16)
-#define DTO_VAL           (0xEUL << 16)
-#define SRA               BIT24
-#define SRC_MASK          BIT25
-#define SRC               BIT25
-#define SRD               BIT26



-#define MMCHS_STAT        (MMCHS1BASE + 0x130)
-#define CC                BIT0
-#define TC                BIT1
-#define BWR               BIT4
-#define BRR               BIT5
-#define ERRI              BIT15
-#define CTO               BIT16
-#define DTO               BIT20
-#define DCRC              BIT21
-#define DEB               BIT22



-#define MMCHS_IE          (MMCHS1BASE + 0x134)
-#define CC_EN             BIT0
-#define TC_EN             BIT1
-#define BWR_EN            BIT4
-#define BRR_EN            BIT5
-#define CTO_EN            BIT16
-#define CCRC_EN           BIT17
-#define CEB_EN            BIT18
-#define CIE_EN            BIT19
-#define DTO_EN            BIT20
-#define DCRC_EN           BIT21
-#define DEB_EN            BIT22
-#define CERR_EN           BIT28
-#define BADA_EN           BIT29



-#define MMCHS_ISE         (MMCHS1BASE + 0x138)
-#define CC_SIGEN          BIT0
-#define TC_SIGEN          BIT1
-#define BWR_SIGEN         BIT4
-#define BRR_SIGEN         BIT5
-#define CTO_SIGEN         BIT16
-#define CCRC_SIGEN        BIT17
-#define CEB_SIGEN         BIT18
-#define CIE_SIGEN         BIT19
-#define DTO_SIGEN         BIT20
-#define DCRC_SIGEN        BIT21
-#define DEB_SIGEN         BIT22
-#define CERR_SIGEN        BIT28
-#define BADA_SIGEN        BIT29



-#define MMCHS_AC12        (MMCHS1BASE + 0x13C)



-#define MMCHS_CAPA        (MMCHS1BASE + 0x140)
-#define VS30              BIT25
-#define VS18              BIT26



-#define MMCHS_CUR_CAPA    (MMCHS1BASE + 0x148)
-#define MMCHS_REV         (MMCHS1BASE + 0x1FC)



-#define CMD0              INDX(0)
-#define CMD0_INT_EN       (CC_EN | CEB_EN)



-#define CMD1              (INDX(1) | RSP_TYPE_48BITS)
-#define CMD1_INT_EN       (CC_EN | CEB_EN | CTO_EN)



-#define CMD2              (INDX(2) | CCCE_ENABLE | RSP_TYPE_136BITS)
-#define CMD2_INT_EN       (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN)



-#define CMD3              (INDX(3) | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS)
-#define CMD3_INT_EN       (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN)



-#define CMD5              (INDX(5) | RSP_TYPE_48BITS)
-#define CMD5_INT_EN       (CC_EN | CEB_EN | CTO_EN)



-#define CMD7              (INDX(7) | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS)
-#define CMD7_INT_EN       (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN)



-#define CMD8              (INDX(8) | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS)
-#define CMD8_INT_EN       (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN)
-//Reserved(0)[12:31], Supply voltage(1)[11:8], check pattern(0xCE)[7:0] = 0x1CE
-#define CMD8_ARG          (0x0UL << 12 | BIT8 | 0xCEUL << 0)



-#define CMD9              (INDX(9) | CCCE_ENABLE | RSP_TYPE_136BITS)
-#define CMD9_INT_EN       (CCRC_EN | CC_EN | CEB_EN | CTO_EN)



-#define CMD16             (INDX(16) | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS)
-#define CMD16_INT_EN      (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN)



-#define CMD17             (INDX(17) | DP_ENABLE | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS | DDIR_READ)
-#define CMD17_INT_EN      (CERR_EN | CIE_EN | CCRC_EN | CC_EN | TC_EN | BRR_EN | CTO_EN | DTO_EN | DCRC_EN | DEB_EN | CEB_EN)



-#define CMD18             (INDX(18) | DP_ENABLE | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS | MSBS_MULTBLK | DDIR_READ | BCE_ENABLE | DE_ENABLE)
-#define CMD18_INT_EN      (CERR_EN | CIE_EN | CCRC_EN | CC_EN | TC_EN | BRR_EN | CTO_EN | DTO_EN | DCRC_EN | DEB_EN | CEB_EN)



-#define CMD23             (INDX(23) | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS)
-#define CMD23_INT_EN      (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN)



-#define CMD24             (INDX(24) | DP_ENABLE | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS | DDIR_WRITE)
-#define CMD24_INT_EN      (CERR_EN | CIE_EN | CCRC_EN | CC_EN | TC_EN | BWR_EN | CTO_EN | DTO_EN | DCRC_EN | DEB_EN | CEB_EN)



-#define CMD25             (INDX(25) | DP_ENABLE | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS | MSBS_MULTBLK | DDIR_READ | BCE_ENABLE | DE_ENABLE)
-#define CMD25_INT_EN      (CERR_EN | CIE_EN | CCRC_EN | CC_EN | TC_EN | BRR_EN | CTO_EN | DTO_EN | DCRC_EN | DEB_EN | CEB_EN)



-#define CMD55             (INDX(55) | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS)
-#define CMD55_INT_EN      (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN)



-#define ACMD41            (INDX(41) | RSP_TYPE_48BITS)
-#define ACMD41_INT_EN     (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN)



-#define ACMD6             (INDX(6) | RSP_TYPE_48BITS)
-#define ACMD6_INT_EN      (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN)



-#endif //__OMAP3530SDIO_H__
diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530PadConfiguration.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530PadConfiguration.h
deleted file mode 100644
index 1588e1d4d91f..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530PadConfiguration.h
+++ /dev/null
@@ -1,303 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP3530_PAD_CONFIGURATION_H__
-#define __OMAP3530_PAD_CONFIGURATION_H__



-#define SYSTEM_CONTROL_MODULE_BASE  0x48002000



-//Pin definition
-#define SDRC_D0             (SYSTEM_CONTROL_MODULE_BASE + 0x030)
-#define SDRC_D1             (SYSTEM_CONTROL_MODULE_BASE + 0x032)
-#define SDRC_D2             (SYSTEM_CONTROL_MODULE_BASE + 0x034)
-#define SDRC_D3             (SYSTEM_CONTROL_MODULE_BASE + 0x036)
-#define SDRC_D4             (SYSTEM_CONTROL_MODULE_BASE + 0x038)
-#define SDRC_D5             (SYSTEM_CONTROL_MODULE_BASE + 0x03A)
-#define SDRC_D6             (SYSTEM_CONTROL_MODULE_BASE + 0x03C)
-#define SDRC_D7             (SYSTEM_CONTROL_MODULE_BASE + 0x03E)
-#define SDRC_D8             (SYSTEM_CONTROL_MODULE_BASE + 0x040)
-#define SDRC_D9             (SYSTEM_CONTROL_MODULE_BASE + 0x042)
-#define SDRC_D10            (SYSTEM_CONTROL_MODULE_BASE + 0x044)
-#define SDRC_D11            (SYSTEM_CONTROL_MODULE_BASE + 0x046)
-#define SDRC_D12            (SYSTEM_CONTROL_MODULE_BASE + 0x048)
-#define SDRC_D13            (SYSTEM_CONTROL_MODULE_BASE + 0x04A)
-#define SDRC_D14            (SYSTEM_CONTROL_MODULE_BASE + 0x04C)
-#define SDRC_D15            (SYSTEM_CONTROL_MODULE_BASE + 0x04E)
-#define SDRC_D16            (SYSTEM_CONTROL_MODULE_BASE + 0x050)
-#define SDRC_D17            (SYSTEM_CONTROL_MODULE_BASE + 0x052)
-#define SDRC_D18            (SYSTEM_CONTROL_MODULE_BASE + 0x054)
-#define SDRC_D19            (SYSTEM_CONTROL_MODULE_BASE + 0x056)
-#define SDRC_D20            (SYSTEM_CONTROL_MODULE_BASE + 0x058)
-#define SDRC_D21            (SYSTEM_CONTROL_MODULE_BASE + 0x05A)
-#define SDRC_D22            (SYSTEM_CONTROL_MODULE_BASE + 0x05C)
-#define SDRC_D23            (SYSTEM_CONTROL_MODULE_BASE + 0x05E)
-#define SDRC_D24            (SYSTEM_CONTROL_MODULE_BASE + 0x060)
-#define SDRC_D25            (SYSTEM_CONTROL_MODULE_BASE + 0x062)
-#define SDRC_D26            (SYSTEM_CONTROL_MODULE_BASE + 0x064)
-#define SDRC_D27            (SYSTEM_CONTROL_MODULE_BASE + 0x066)
-#define SDRC_D28            (SYSTEM_CONTROL_MODULE_BASE + 0x068)
-#define SDRC_D29            (SYSTEM_CONTROL_MODULE_BASE + 0x06A)
-#define SDRC_D30            (SYSTEM_CONTROL_MODULE_BASE + 0x06C)
-#define SDRC_D31            (SYSTEM_CONTROL_MODULE_BASE + 0x06E)
-#define SDRC_CLK            (SYSTEM_CONTROL_MODULE_BASE + 0x070)
-#define SDRC_DQS0           (SYSTEM_CONTROL_MODULE_BASE + 0x072)
-#define SDRC_CKE0           (SYSTEM_CONTROL_MODULE_BASE + 0x262)
-#define SDRC_CKE1           (SYSTEM_CONTROL_MODULE_BASE + 0x264)
-#define SDRC_DQS1           (SYSTEM_CONTROL_MODULE_BASE + 0x074)
-#define SDRC_DQS2           (SYSTEM_CONTROL_MODULE_BASE + 0x076)
-#define SDRC_DQS3           (SYSTEM_CONTROL_MODULE_BASE + 0x078)
-#define GPMC_A1             (SYSTEM_CONTROL_MODULE_BASE + 0x07A)
-#define GPMC_A2             (SYSTEM_CONTROL_MODULE_BASE + 0x07C)
-#define GPMC_A3             (SYSTEM_CONTROL_MODULE_BASE + 0x07E)
-#define GPMC_A4             (SYSTEM_CONTROL_MODULE_BASE + 0x080)
-#define GPMC_A5             (SYSTEM_CONTROL_MODULE_BASE + 0x082)
-#define GPMC_A6             (SYSTEM_CONTROL_MODULE_BASE + 0x084)
-#define GPMC_A7             (SYSTEM_CONTROL_MODULE_BASE + 0x086)
-#define GPMC_A8             (SYSTEM_CONTROL_MODULE_BASE + 0x088)
-#define GPMC_A9             (SYSTEM_CONTROL_MODULE_BASE + 0x08A)
-#define GPMC_A10            (SYSTEM_CONTROL_MODULE_BASE + 0x08C)
-#define GPMC_D0             (SYSTEM_CONTROL_MODULE_BASE + 0x08E)
-#define GPMC_D1             (SYSTEM_CONTROL_MODULE_BASE + 0x090)
-#define GPMC_D2             (SYSTEM_CONTROL_MODULE_BASE + 0x092)
-#define GPMC_D3             (SYSTEM_CONTROL_MODULE_BASE + 0x094)
-#define GPMC_D4             (SYSTEM_CONTROL_MODULE_BASE + 0x096)
-#define GPMC_D5             (SYSTEM_CONTROL_MODULE_BASE + 0x098)
-#define GPMC_D6             (SYSTEM_CONTROL_MODULE_BASE + 0x09A)
-#define GPMC_D7             (SYSTEM_CONTROL_MODULE_BASE + 0x09C)
-#define GPMC_D8             (SYSTEM_CONTROL_MODULE_BASE + 0x09E)
-#define GPMC_D9             (SYSTEM_CONTROL_MODULE_BASE + 0x0A0)
-#define GPMC_D10            (SYSTEM_CONTROL_MODULE_BASE + 0x0A2)
-#define GPMC_D11            (SYSTEM_CONTROL_MODULE_BASE + 0x0A4)
-#define GPMC_D12            (SYSTEM_CONTROL_MODULE_BASE + 0x0A6)
-#define GPMC_D13            (SYSTEM_CONTROL_MODULE_BASE + 0x0A8)
-#define GPMC_D14            (SYSTEM_CONTROL_MODULE_BASE + 0x0AA)
-#define GPMC_D15            (SYSTEM_CONTROL_MODULE_BASE + 0x0AC)
-#define GPMC_NCS0           (SYSTEM_CONTROL_MODULE_BASE + 0x0AE)
-#define GPMC_NCS1           (SYSTEM_CONTROL_MODULE_BASE + 0x0B0)
-#define GPMC_NCS2           (SYSTEM_CONTROL_MODULE_BASE + 0x0B2)
-#define GPMC_NCS3           (SYSTEM_CONTROL_MODULE_BASE + 0x0B4)
-#define GPMC_NCS4           (SYSTEM_CONTROL_MODULE_BASE + 0x0B6)
-#define GPMC_NCS5           (SYSTEM_CONTROL_MODULE_BASE + 0x0B8)
-#define GPMC_NCS6           (SYSTEM_CONTROL_MODULE_BASE + 0x0BA)
-#define GPMC_NCS7           (SYSTEM_CONTROL_MODULE_BASE + 0x0BC)
-#define GPMC_CLK            (SYSTEM_CONTROL_MODULE_BASE + 0x0BE)
-#define GPMC_NADV_ALE       (SYSTEM_CONTROL_MODULE_BASE + 0x0C0)
-#define GPMC_NOE            (SYSTEM_CONTROL_MODULE_BASE + 0x0C2)
-#define GPMC_NWE            (SYSTEM_CONTROL_MODULE_BASE + 0x0C4)
-#define GPMC_NBE0_CLE       (SYSTEM_CONTROL_MODULE_BASE + 0x0C6)
-#define GPMC_NBE1           (SYSTEM_CONTROL_MODULE_BASE + 0x0C8)
-#define GPMC_NWP            (SYSTEM_CONTROL_MODULE_BASE + 0x0CA)
-#define GPMC_WAIT0          (SYSTEM_CONTROL_MODULE_BASE + 0x0CC)
-#define GPMC_WAIT1          (SYSTEM_CONTROL_MODULE_BASE + 0x0CE)
-#define GPMC_WAIT2          (SYSTEM_CONTROL_MODULE_BASE + 0x0D0)
-#define GPMC_WAIT3          (SYSTEM_CONTROL_MODULE_BASE + 0x0D2)
-#define DSS_PCLK            (SYSTEM_CONTROL_MODULE_BASE + 0x0D4)
-#define DSS_HSYNC           (SYSTEM_CONTROL_MODULE_BASE + 0x0D6)
-#define DSS_PSYNC           (SYSTEM_CONTROL_MODULE_BASE + 0x0D8)
-#define DSS_ACBIAS          (SYSTEM_CONTROL_MODULE_BASE + 0x0DA)
-#define DSS_DATA0           (SYSTEM_CONTROL_MODULE_BASE + 0x0DC)
-#define DSS_DATA1           (SYSTEM_CONTROL_MODULE_BASE + 0x0DE)
-#define DSS_DATA2           (SYSTEM_CONTROL_MODULE_BASE + 0x0E0)
-#define DSS_DATA3           (SYSTEM_CONTROL_MODULE_BASE + 0x0E2)
-#define DSS_DATA4           (SYSTEM_CONTROL_MODULE_BASE + 0x0E4)
-#define DSS_DATA5           (SYSTEM_CONTROL_MODULE_BASE + 0x0E6)
-#define DSS_DATA6           (SYSTEM_CONTROL_MODULE_BASE + 0x0E8)
-#define DSS_DATA7           (SYSTEM_CONTROL_MODULE_BASE + 0x0EA)
-#define DSS_DATA8           (SYSTEM_CONTROL_MODULE_BASE + 0x0EC)
-#define DSS_DATA9           (SYSTEM_CONTROL_MODULE_BASE + 0x0EE)
-#define DSS_DATA10          (SYSTEM_CONTROL_MODULE_BASE + 0x0F0)
-#define DSS_DATA11          (SYSTEM_CONTROL_MODULE_BASE + 0x0F2)
-#define DSS_DATA12          (SYSTEM_CONTROL_MODULE_BASE + 0x0F4)
-#define DSS_DATA13          (SYSTEM_CONTROL_MODULE_BASE + 0x0F6)
-#define DSS_DATA14          (SYSTEM_CONTROL_MODULE_BASE + 0x0F8)
-#define DSS_DATA15          (SYSTEM_CONTROL_MODULE_BASE + 0x0FA)
-#define DSS_DATA16          (SYSTEM_CONTROL_MODULE_BASE + 0x0FC)
-#define DSS_DATA17          (SYSTEM_CONTROL_MODULE_BASE + 0x0FE)
-#define DSS_DATA18          (SYSTEM_CONTROL_MODULE_BASE + 0x100)
-#define DSS_DATA19          (SYSTEM_CONTROL_MODULE_BASE + 0x102)
-#define DSS_DATA20          (SYSTEM_CONTROL_MODULE_BASE + 0x104)
-#define DSS_DATA21          (SYSTEM_CONTROL_MODULE_BASE + 0x106)
-#define DSS_DATA22          (SYSTEM_CONTROL_MODULE_BASE + 0x108)
-#define DSS_DATA23          (SYSTEM_CONTROL_MODULE_BASE + 0x10A)
-#define CAM_HS              (SYSTEM_CONTROL_MODULE_BASE + 0x10C)
-#define CAM_VS              (SYSTEM_CONTROL_MODULE_BASE + 0x10E)
-#define CAM_XCLKA           (SYSTEM_CONTROL_MODULE_BASE + 0x110)
-#define CAM_PCLK            (SYSTEM_CONTROL_MODULE_BASE + 0x112)
-#define CAM_FLD             (SYSTEM_CONTROL_MODULE_BASE + 0x114)
-#define CAM_D0              (SYSTEM_CONTROL_MODULE_BASE + 0x116)
-#define CAM_D1              (SYSTEM_CONTROL_MODULE_BASE + 0x118)
-#define CAM_D2              (SYSTEM_CONTROL_MODULE_BASE + 0x11A)
-#define CAM_D3              (SYSTEM_CONTROL_MODULE_BASE + 0x11C)
-#define CAM_D4              (SYSTEM_CONTROL_MODULE_BASE + 0x11E)
-#define CAM_D5              (SYSTEM_CONTROL_MODULE_BASE + 0x120)
-#define CAM_D6              (SYSTEM_CONTROL_MODULE_BASE + 0x122)
-#define CAM_D7              (SYSTEM_CONTROL_MODULE_BASE + 0x124)
-#define CAM_D8              (SYSTEM_CONTROL_MODULE_BASE + 0x126)
-#define CAM_D9              (SYSTEM_CONTROL_MODULE_BASE + 0x128)
-#define CAM_D10             (SYSTEM_CONTROL_MODULE_BASE + 0x12A)
-#define CAM_D11             (SYSTEM_CONTROL_MODULE_BASE + 0x12C)
-#define CAM_XCLKB           (SYSTEM_CONTROL_MODULE_BASE + 0x12E)
-#define CAM_WEN             (SYSTEM_CONTROL_MODULE_BASE + 0x130)
-#define CAM_STROBE          (SYSTEM_CONTROL_MODULE_BASE + 0x132)
-#define CSI2_DX0            (SYSTEM_CONTROL_MODULE_BASE + 0x134)
-#define CSI2_DY0            (SYSTEM_CONTROL_MODULE_BASE + 0x136)
-#define CSI2_DX1            (SYSTEM_CONTROL_MODULE_BASE + 0x138)
-#define CSI2_DY1            (SYSTEM_CONTROL_MODULE_BASE + 0x13A)
-#define MCBSP2_FSX          (SYSTEM_CONTROL_MODULE_BASE + 0x13C)
-#define MCBSP2_CLKX         (SYSTEM_CONTROL_MODULE_BASE + 0x13E)
-#define MCBSP2_DR           (SYSTEM_CONTROL_MODULE_BASE + 0x140)
-#define MCBSP2_DX           (SYSTEM_CONTROL_MODULE_BASE + 0x142)
-#define MMC1_CLK            (SYSTEM_CONTROL_MODULE_BASE + 0x144)
-#define MMC1_CMD            (SYSTEM_CONTROL_MODULE_BASE + 0x146)
-#define MMC1_DAT0           (SYSTEM_CONTROL_MODULE_BASE + 0x148)
-#define MMC1_DAT1           (SYSTEM_CONTROL_MODULE_BASE + 0x14A)
-#define MMC1_DAT2           (SYSTEM_CONTROL_MODULE_BASE + 0x14C)
-#define MMC1_DAT3           (SYSTEM_CONTROL_MODULE_BASE + 0x14E)
-#define MMC1_DAT4           (SYSTEM_CONTROL_MODULE_BASE + 0x150)
-#define MMC1_DAT5           (SYSTEM_CONTROL_MODULE_BASE + 0x152)
-#define MMC1_DAT6           (SYSTEM_CONTROL_MODULE_BASE + 0x154)
-#define MMC1_DAT7           (SYSTEM_CONTROL_MODULE_BASE + 0x156)
-#define MMC2_CLK            (SYSTEM_CONTROL_MODULE_BASE + 0x158)
-#define MMC2_CMD            (SYSTEM_CONTROL_MODULE_BASE + 0x15A)
-#define MMC2_DAT0           (SYSTEM_CONTROL_MODULE_BASE + 0x15C)
-#define MMC2_DAT1           (SYSTEM_CONTROL_MODULE_BASE + 0x15E)
-#define MMC2_DAT2           (SYSTEM_CONTROL_MODULE_BASE + 0x160)
-#define MMC2_DAT3           (SYSTEM_CONTROL_MODULE_BASE + 0x162)
-#define MMC2_DAT4           (SYSTEM_CONTROL_MODULE_BASE + 0x164)
-#define MMC2_DAT5           (SYSTEM_CONTROL_MODULE_BASE + 0x166)
-#define MMC2_DAT6           (SYSTEM_CONTROL_MODULE_BASE + 0x168)
-#define MMC2_DAT7           (SYSTEM_CONTROL_MODULE_BASE + 0x16A)
-#define MCBSP3_DX           (SYSTEM_CONTROL_MODULE_BASE + 0x16C)
-#define MCBSP3_DR           (SYSTEM_CONTROL_MODULE_BASE + 0x16E)
-#define MCBSP3_CLKX         (SYSTEM_CONTROL_MODULE_BASE + 0x170)
-#define MCBSP3_FSX          (SYSTEM_CONTROL_MODULE_BASE + 0x172)
-#define UART2_CTS           (SYSTEM_CONTROL_MODULE_BASE + 0x174)
-#define UART2_RTS           (SYSTEM_CONTROL_MODULE_BASE + 0x176)
-#define UART2_TX            (SYSTEM_CONTROL_MODULE_BASE + 0x178)
-#define UART2_RX            (SYSTEM_CONTROL_MODULE_BASE + 0x17A)
-#define UART1_TX            (SYSTEM_CONTROL_MODULE_BASE + 0x17C)
-#define UART1_RTS           (SYSTEM_CONTROL_MODULE_BASE + 0x17E)
-#define UART1_CTS           (SYSTEM_CONTROL_MODULE_BASE + 0x180)
-#define UART1_RX            (SYSTEM_CONTROL_MODULE_BASE + 0x182)
-#define MCBSP4_CLKX         (SYSTEM_CONTROL_MODULE_BASE + 0x184)
-#define MCBSP4_DR           (SYSTEM_CONTROL_MODULE_BASE + 0x186)
-#define MCBSP4_DX           (SYSTEM_CONTROL_MODULE_BASE + 0x188)
-#define MCBSP4_FSX          (SYSTEM_CONTROL_MODULE_BASE + 0x18A)
-#define MCBSP1_CLKR         (SYSTEM_CONTROL_MODULE_BASE + 0x18C)
-#define MCBSP1_FSR          (SYSTEM_CONTROL_MODULE_BASE + 0x18E)
-#define MCBSP1_DX           (SYSTEM_CONTROL_MODULE_BASE + 0x190)
-#define MCBSP1_DR           (SYSTEM_CONTROL_MODULE_BASE + 0x192)
-#define MCBSP1_CLKS         (SYSTEM_CONTROL_MODULE_BASE + 0x194)
-#define MCBSP1_FSX          (SYSTEM_CONTROL_MODULE_BASE + 0x196)
-#define MCBSP1_CLKX         (SYSTEM_CONTROL_MODULE_BASE + 0x198)
-#define UART3_CTS_RCTX      (SYSTEM_CONTROL_MODULE_BASE + 0x19A)
-#define UART3_RTS_SD        (SYSTEM_CONTROL_MODULE_BASE + 0x19C)
-#define UART3_RX_IRRX       (SYSTEM_CONTROL_MODULE_BASE + 0x19E)
-#define UART3_TX_IRTX       (SYSTEM_CONTROL_MODULE_BASE + 0x1A0)
-#define HSUSB0_CLK          (SYSTEM_CONTROL_MODULE_BASE + 0x1A2)
-#define HSUSB0_STP          (SYSTEM_CONTROL_MODULE_BASE + 0x1A4)
-#define HSUSB0_DIR          (SYSTEM_CONTROL_MODULE_BASE + 0x1A6)
-#define HSUSB0_NXT          (SYSTEM_CONTROL_MODULE_BASE + 0x1A8)
-#define HSUSB0_DATA0        (SYSTEM_CONTROL_MODULE_BASE + 0x1AA)
-#define HSUSB0_DATA1        (SYSTEM_CONTROL_MODULE_BASE + 0x1AC)
-#define HSUSB0_DATA2        (SYSTEM_CONTROL_MODULE_BASE + 0x1AE)
-#define HSUSB0_DATA3        (SYSTEM_CONTROL_MODULE_BASE + 0x1B0)
-#define HSUSB0_DATA4        (SYSTEM_CONTROL_MODULE_BASE + 0x1B2)
-#define HSUSB0_DATA5        (SYSTEM_CONTROL_MODULE_BASE + 0x1B4)
-#define HSUSB0_DATA6        (SYSTEM_CONTROL_MODULE_BASE + 0x1B6)
-#define HSUSB0_DATA7        (SYSTEM_CONTROL_MODULE_BASE + 0x1B8)
-#define I2C1_SCL            (SYSTEM_CONTROL_MODULE_BASE + 0x1BA)
-#define I2C1_SDA            (SYSTEM_CONTROL_MODULE_BASE + 0x1BC)
-#define I2C2_SCL            (SYSTEM_CONTROL_MODULE_BASE + 0x1BE)
-#define I2C2_SDA            (SYSTEM_CONTROL_MODULE_BASE + 0x1C0)
-#define I2C3_SCL            (SYSTEM_CONTROL_MODULE_BASE + 0x1C2)
-#define I2C3_SDA            (SYSTEM_CONTROL_MODULE_BASE + 0x1C4)
-#define HDQ_SIO             (SYSTEM_CONTROL_MODULE_BASE + 0x1C6)
-#define MCSPI1_CLK          (SYSTEM_CONTROL_MODULE_BASE + 0x1C8)
-#define MCSPI1_SIMO         (SYSTEM_CONTROL_MODULE_BASE + 0x1CA)
-#define MCSPI1_SOMI         (SYSTEM_CONTROL_MODULE_BASE + 0x1CC)
-#define MCSPI1_CS0          (SYSTEM_CONTROL_MODULE_BASE + 0x1CE)
-#define MCSPI1_CS1          (SYSTEM_CONTROL_MODULE_BASE + 0x1D0)
-#define MCSPI1_CS2          (SYSTEM_CONTROL_MODULE_BASE + 0x1D2)
-#define MCSPI1_CS3          (SYSTEM_CONTROL_MODULE_BASE + 0x1D4)
-#define MCSPI2_CLK          (SYSTEM_CONTROL_MODULE_BASE + 0x1D6)
-#define MCSPI2_SIMO         (SYSTEM_CONTROL_MODULE_BASE + 0x1D8)
-#define MCSPI2_SOMI         (SYSTEM_CONTROL_MODULE_BASE + 0x1DA)
-#define MCSPI2_CS0          (SYSTEM_CONTROL_MODULE_BASE + 0x1DC)
-#define MCSPI2_CS1          (SYSTEM_CONTROL_MODULE_BASE + 0x1DE)
-#define SYS_NIRQ            (SYSTEM_CONTROL_MODULE_BASE + 0x1E0)
-#define SYS_CLKOUT2         (SYSTEM_CONTROL_MODULE_BASE + 0x1E2)
-#define ETK_CLK             (SYSTEM_CONTROL_MODULE_BASE + 0x5D8)
-#define ETK_CTL             (SYSTEM_CONTROL_MODULE_BASE + 0x5DA)
-#define ETK_D0              (SYSTEM_CONTROL_MODULE_BASE + 0x5DC)
-#define ETK_D1              (SYSTEM_CONTROL_MODULE_BASE + 0x5DE)
-#define ETK_D2              (SYSTEM_CONTROL_MODULE_BASE + 0x5E0)
-#define ETK_D3              (SYSTEM_CONTROL_MODULE_BASE + 0x5E2)
-#define ETK_D4              (SYSTEM_CONTROL_MODULE_BASE + 0x5E4)
-#define ETK_D5              (SYSTEM_CONTROL_MODULE_BASE + 0x5E6)
-#define ETK_D6              (SYSTEM_CONTROL_MODULE_BASE + 0x5E8)
-#define ETK_D7              (SYSTEM_CONTROL_MODULE_BASE + 0x5EA)
-#define ETK_D8              (SYSTEM_CONTROL_MODULE_BASE + 0x5EC)
-#define ETK_D9              (SYSTEM_CONTROL_MODULE_BASE + 0x5EE)
-#define ETK_D10             (SYSTEM_CONTROL_MODULE_BASE + 0x5F0)
-#define ETK_D11             (SYSTEM_CONTROL_MODULE_BASE + 0x5F2)
-#define ETK_D12             (SYSTEM_CONTROL_MODULE_BASE + 0x5F4)
-#define ETK_D13             (SYSTEM_CONTROL_MODULE_BASE + 0x5F6)
-#define ETK_D14             (SYSTEM_CONTROL_MODULE_BASE + 0x5F8)
-#define ETK_D15             (SYSTEM_CONTROL_MODULE_BASE + 0x5FA)
-#define SYS_BOOT0           (SYSTEM_CONTROL_MODULE_BASE + 0xA0A)
-#define SYS_BOOT1           (SYSTEM_CONTROL_MODULE_BASE + 0xA0C)
-#define SYS_BOOT3           (SYSTEM_CONTROL_MODULE_BASE + 0xA10)
-#define SYS_BOOT4           (SYSTEM_CONTROL_MODULE_BASE + 0xA12)
-#define SYS_BOOT5           (SYSTEM_CONTROL_MODULE_BASE + 0xA14)
-#define SYS_BOOT6           (SYSTEM_CONTROL_MODULE_BASE + 0xA16)



-//Mux modes
-#define MUXMODE0            (0x0UL)
-#define MUXMODE1            (0x1UL)
-#define MUXMODE2            (0x2UL)
-#define MUXMODE3            (0x3UL)
-#define MUXMODE4            (0x4UL)
-#define MUXMODE5            (0x5UL)
-#define MUXMODE6            (0x6UL)
-#define MUXMODE7            (0x7UL)



-//Pad configuration register.
-#define PAD_CONFIG_MASK      (0xFFFFUL)
-#define MUXMODE_OFFSET       0
-#define MUXMODE_MASK         (0x7UL << MUXMODE_OFFSET)
-#define PULL_CONFIG_OFFSET   3
-#define PULL_CONFIG_MASK     (0x3UL << PULL_CONFIG_OFFSET)
-#define INPUTENABLE_OFFSET   8
-#define INPUTENABLE_MASK     (0x1UL << INPUTENABLE_OFFSET)
-#define OFFMODE_VALUE_OFFSET 9
-#define OFFMODE_VALUE_MASK   (0x1FUL << OFFMODE_VALUE_OFFSET)
-#define WAKEUP_OFFSET        14
-#define WAKEUP_MASK          (0x2UL << WAKEUP_OFFSET)



-#define PULL_DOWN_SELECTED   ((0x0UL << 1) | BIT0)
-#define PULL_UP_SELECTED     (BIT1 | BIT0)
-#define PULL_DISABLED        (0x0UL << 0)



-#define OUTPUT               (0x0UL) //Pin is configured in output only mode.
-#define INPUT                (0x1UL) //Pin is configured in bi-directional mode.



-typedef struct {

UINTN   Pin;
UINTN   MuxMode;
UINTN   PullConfig;
UINTN   InputEnable;

-} PAD_CONFIGURATION;



-#endif //__OMAP3530_PAD_CONFIGURATION_H__
diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Prcm.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Prcm.h
deleted file mode 100644
index 1871dbb12238..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Prcm.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP3530PRCM_H__
-#define __OMAP3530PRCM_H__



-#define CM_FCLKEN1_CORE   (0x48004A00)
-#define CM_FCLKEN3_CORE   (0x48004A08)
-#define CM_ICLKEN1_CORE   (0x48004A10)
-#define CM_ICLKEN3_CORE   (0x48004A18)
-#define CM_CLKEN2_PLL     (0x48004D04)
-#define CM_CLKSEL4_PLL    (0x48004D4C)
-#define CM_CLKSEL5_PLL    (0x48004D50)
-#define CM_FCLKEN_USBHOST  (0x48005400)
-#define CM_ICLKEN_USBHOST  (0x48005410)
-#define CM_CLKSTST_USBHOST (0x4800544c)



-//Wakeup clock defintion
-#define CM_FCLKEN_WKUP    (0x48004C00)
-#define CM_ICLKEN_WKUP    (0x48004C10)



-//Peripheral clock definition
-#define CM_FCLKEN_PER     (0x48005000)
-#define CM_ICLKEN_PER     (0x48005010)
-#define CM_CLKSEL_PER     (0x48005040)



-//Reset management definition
-#define PRM_RSTCTRL       (0x48307250)
-#define PRM_RSTST         (0x48307258)



-//CORE clock
-#define CM_FCLKEN1_CORE_EN_I2C1_MASK    BIT15
-#define CM_FCLKEN1_CORE_EN_I2C1_DISABLE (0UL << 15)
-#define CM_FCLKEN1_CORE_EN_I2C1_ENABLE  BIT15



-#define CM_ICLKEN1_CORE_EN_I2C1_MASK    BIT15
-#define CM_ICLKEN1_CORE_EN_I2C1_DISABLE (0UL << 15)
-#define CM_ICLKEN1_CORE_EN_I2C1_ENABLE  BIT15



-#define CM_FCLKEN1_CORE_EN_MMC1_MASK    BIT24
-#define CM_FCLKEN1_CORE_EN_MMC1_DISABLE (0UL << 24)
-#define CM_FCLKEN1_CORE_EN_MMC1_ENABLE  BIT24



-#define CM_FCLKEN3_CORE_EN_USBTLL_MASK    BIT2
-#define CM_FCLKEN3_CORE_EN_USBTLL_DISABLE (0UL << 2)
-#define CM_FCLKEN3_CORE_EN_USBTLL_ENABLE  BIT2



-#define CM_ICLKEN1_CORE_EN_MMC1_MASK    BIT24
-#define CM_ICLKEN1_CORE_EN_MMC1_DISABLE (0UL << 24)
-#define CM_ICLKEN1_CORE_EN_MMC1_ENABLE  BIT24



-#define CM_ICLKEN3_CORE_EN_USBTLL_MASK    BIT2
-#define CM_ICLKEN3_CORE_EN_USBTLL_DISABLE (0UL << 2)
-#define CM_ICLKEN3_CORE_EN_USBTLL_ENABLE  BIT2



-#define CM_CLKEN_FREQSEL_075_100        (0x03UL << 4)
-#define CM_CLKEN_ENABLE                 (7UL << 0)



-#define CM_CLKSEL_PLL_MULT(x)           (((x) & 0x07FF) << 8)
-#define CM_CLKSEL_PLL_DIV(x)            ((((x) - 1) & 0x7F) << 0)



-#define CM_CLKSEL_DIV_120M(x)           (((x) & 0x1F) << 0)



-#define CM_FCLKEN_USBHOST_EN_USBHOST2_MASK    BIT1
-#define CM_FCLKEN_USBHOST_EN_USBHOST2_DISABLE (0UL << 1)
-#define CM_FCLKEN_USBHOST_EN_USBHOST2_ENABLE  BIT1



-#define CM_FCLKEN_USBHOST_EN_USBHOST1_MASK    BIT0
-#define CM_FCLKEN_USBHOST_EN_USBHOST1_DISABLE (0UL << 0)
-#define CM_FCLKEN_USBHOST_EN_USBHOST1_ENABLE  BIT0



-#define CM_ICLKEN_USBHOST_EN_USBHOST_MASK     BIT0
-#define CM_ICLKEN_USBHOST_EN_USBHOST_DISABLE  (0UL << 0)
-#define CM_ICLKEN_USBHOST_EN_USBHOST_ENABLE   BIT0



-//Wakeup functional clock
-#define CM_FCLKEN_WKUP_EN_GPIO1_DISABLE       (0UL << 3)
-#define CM_FCLKEN_WKUP_EN_GPIO1_ENABLE        BIT3



-#define CM_FCLKEN_WKUP_EN_WDT2_DISABLE        (0UL << 5)
-#define CM_FCLKEN_WKUP_EN_WDT2_ENABLE         BIT5



-//Wakeup interface clock
-#define CM_ICLKEN_WKUP_EN_GPIO1_DISABLE       (0UL << 3)
-#define CM_ICLKEN_WKUP_EN_GPIO1_ENABLE        BIT3



-#define CM_ICLKEN_WKUP_EN_WDT2_DISABLE        (0UL << 5)
-#define CM_ICLKEN_WKUP_EN_WDT2_ENABLE         BIT5



-//Peripheral functional clock
-#define CM_FCLKEN_PER_EN_GPT3_DISABLE         (0UL << 4)
-#define CM_FCLKEN_PER_EN_GPT3_ENABLE          BIT4



-#define CM_FCLKEN_PER_EN_GPT4_DISABLE         (0UL << 5)
-#define CM_FCLKEN_PER_EN_GPT4_ENABLE          BIT5



-#define CM_FCLKEN_PER_EN_UART3_DISABLE        (0UL << 11)
-#define CM_FCLKEN_PER_EN_UART3_ENABLE         BIT11



-#define CM_FCLKEN_PER_EN_GPIO2_DISABLE        (0UL << 13)
-#define CM_FCLKEN_PER_EN_GPIO2_ENABLE         BIT13



-#define CM_FCLKEN_PER_EN_GPIO3_DISABLE        (0UL << 14)
-#define CM_FCLKEN_PER_EN_GPIO3_ENABLE         BIT14



-#define CM_FCLKEN_PER_EN_GPIO4_DISABLE        (0UL << 15)
-#define CM_FCLKEN_PER_EN_GPIO4_ENABLE         BIT15



-#define CM_FCLKEN_PER_EN_GPIO5_DISABLE        (0UL << 16)
-#define CM_FCLKEN_PER_EN_GPIO5_ENABLE         BIT16



-#define CM_FCLKEN_PER_EN_GPIO6_DISABLE        (0UL << 17)
-#define CM_FCLKEN_PER_EN_GPIO6_ENABLE         BIT17



-//Peripheral interface clock
-#define CM_ICLKEN_PER_EN_GPT3_DISABLE         (0UL << 4)
-#define CM_ICLKEN_PER_EN_GPT3_ENABLE          BIT4



-#define CM_ICLKEN_PER_EN_GPT4_DISABLE         (0UL << 5)
-#define CM_ICLKEN_PER_EN_GPT4_ENABLE          BIT5



-#define CM_ICLKEN_PER_EN_UART3_DISABLE        (0UL << 11)
-#define CM_ICLKEN_PER_EN_UART3_ENABLE         BIT11



-#define CM_ICLKEN_PER_EN_GPIO2_DISABLE        (0UL << 13)
-#define CM_ICLKEN_PER_EN_GPIO2_ENABLE         BIT13



-#define CM_ICLKEN_PER_EN_GPIO3_DISABLE        (0UL << 14)
-#define CM_ICLKEN_PER_EN_GPIO3_ENABLE         BIT14



-#define CM_ICLKEN_PER_EN_GPIO4_DISABLE        (0UL << 15)
-#define CM_ICLKEN_PER_EN_GPIO4_ENABLE         BIT15



-#define CM_ICLKEN_PER_EN_GPIO5_DISABLE        (0UL << 16)
-#define CM_ICLKEN_PER_EN_GPIO5_ENABLE         BIT16



-#define CM_ICLKEN_PER_EN_GPIO6_DISABLE        (0UL << 17)
-#define CM_ICLKEN_PER_EN_GPIO6_ENABLE         BIT17



-//Timer source clock selection
-#define CM_CLKSEL_PER_CLKSEL_GPT3_32K         (0UL << 1)
-#define CM_CLKSEL_PER_CLKSEL_GPT3_SYS         BIT1



-#define CM_CLKSEL_PER_CLKSEL_GPT4_32K         (0UL << 2)
-#define CM_CLKSEL_PER_CLKSEL_GPT4_SYS         BIT2



-//Reset management (Global and Cold reset)
-#define RST_GS            BIT1
-#define RST_DPLL3         BIT2
-#define GLOBAL_SW_RST     BIT1
-#define GLOBAL_COLD_RST   (0x0UL << 0)



-#endif // __OMAP3530PRCM_H__



diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Timer.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Timer.h
deleted file mode 100644
index d66da8dc0446..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Timer.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP3530TIMER_H__
-#define __OMAP3530TIMER_H__



-#define GPTIMER1_BASE   (0x48313000)
-#define GPTIMER2_BASE   (0x49032000)
-#define GPTIMER3_BASE   (0x49034000)
-#define GPTIMER4_BASE   (0x49036000)
-#define GPTIMER5_BASE   (0x49038000)
-#define GPTIMER6_BASE   (0x4903A000)
-#define GPTIMER7_BASE   (0x4903C000)
-#define GPTIMER8_BASE   (0x4903E000)
-#define GPTIMER9_BASE   (0x49040000)
-#define GPTIMER10_BASE  (0x48086000)
-#define GPTIMER11_BASE  (0x48088000)
-#define GPTIMER12_BASE  (0x48304000)
-#define WDTIMER2_BASE   (0x48314000)



-#define GPTIMER_TIOCP_CFG (0x0010)
-#define GPTIMER_TISTAT    (0x0014)
-#define GPTIMER_TISR      (0x0018)
-#define GPTIMER_TIER      (0x001C)
-#define GPTIMER_TWER      (0x0020)
-#define GPTIMER_TCLR      (0x0024)
-#define GPTIMER_TCRR      (0x0028)
-#define GPTIMER_TLDR      (0x002C)
-#define GPTIMER_TTGR      (0x0030)
-#define GPTIMER_TWPS      (0x0034)
-#define GPTIMER_TMAR      (0x0038)
-#define GPTIMER_TCAR1     (0x003C)
-#define GPTIMER_TSICR     (0x0040)
-#define GPTIMER_TCAR2     (0x0044)
-#define GPTIMER_TPIR      (0x0048)
-#define GPTIMER_TNIR      (0x004C)
-#define GPTIMER_TCVR      (0x0050)
-#define GPTIMER_TOCR      (0x0054)
-#define GPTIMER_TOWR      (0x0058)



-#define WSPR              (0x048)



-#define TISR_TCAR_IT_FLAG_MASK  BIT2
-#define TISR_OVF_IT_FLAG_MASK   BIT1
-#define TISR_MAT_IT_FLAG_MASK   BIT0
-#define TISR_ALL_INTERRUPT_MASK (TISR_TCAR_IT_FLAG_MASK | TISR_OVF_IT_FLAG_MASK | TISR_MAT_IT_FLAG_MASK)



-#define TISR_TCAR_IT_FLAG_NOT_PENDING   (0UL << 2)
-#define TISR_OVF_IT_FLAG_NOT_PENDING    (0UL << 1)
-#define TISR_MAT_IT_FLAG_NOT_PENDING    (0UL << 0)
-#define TISR_NO_INTERRUPTS_PENDING      (TISR_TCAR_IT_FLAG_NOT_PENDING | TISR_OVF_IT_FLAG_NOT_PENDING | TISR_MAT_IT_FLAG_NOT_PENDING)



-#define TISR_TCAR_IT_FLAG_CLEAR BIT2
-#define TISR_OVF_IT_FLAG_CLEAR  BIT1
-#define TISR_MAT_IT_FLAG_CLEAR  BIT0
-#define TISR_CLEAR_ALL          (TISR_TCAR_IT_FLAG_CLEAR | TISR_OVF_IT_FLAG_CLEAR | TISR_MAT_IT_FLAG_CLEAR)



-#define TCLR_AR_AUTORELOAD      BIT1
-#define TCLR_AR_ONESHOT         (0UL << 1)
-#define TCLR_ST_ON              BIT0
-#define TCLR_ST_OFF             (0UL << 0)



-#define TIER_TCAR_IT_ENABLE     (BIT2
-#define TIER_TCAR_IT_DISABLE    (0UL << 2)
-#define TIER_OVF_IT_ENABLE      BIT1
-#define TIER_OVF_IT_DISABLE     (0UL << 1)
-#define TIER_MAT_IT_ENABLE      BIT0
-#define TIER_MAT_IT_DISABLE     (0UL << 0)



-#endif // __OMAP3530TIMER_H__



diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Uart.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Uart.h
deleted file mode 100644
index 62cbe3070edc..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Uart.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP3530UART_H__
-#define __OMAP3530UART_H__



-#define UART1_BASE  (0x4806A000)
-#define UART2_BASE  (0x4806C000)
-#define UART3_BASE  (0x49020000)



-#define UART_DLL_REG  (0x0000)
-#define UART_RBR_REG  (0x0000)
-#define UART_THR_REG  (0x0000)
-#define UART_DLH_REG  (0x0004)
-#define UART_FCR_REG  (0x0008)
-#define UART_LCR_REG  (0x000C)
-#define UART_MCR_REG  (0x0010)
-#define UART_LSR_REG  (0x0014)
-#define UART_MDR1_REG (0x0020)



-#define UART_FCR_TX_FIFO_CLEAR          BIT2
-#define UART_FCR_RX_FIFO_CLEAR          BIT1
-#define UART_FCR_FIFO_ENABLE            BIT0



-#define UART_LCR_DIV_EN_ENABLE          BIT7
-#define UART_LCR_DIV_EN_DISABLE         (0UL << 7)
-#define UART_LCR_CHAR_LENGTH_8          (BIT1 | BIT0)



-#define UART_MCR_RTS_FORCE_ACTIVE       BIT1
-#define UART_MCR_DTR_FORCE_ACTIVE       BIT0



-#define UART_LSR_TX_FIFO_E_MASK         BIT5
-#define UART_LSR_TX_FIFO_E_NOT_EMPTY    (0UL << 5)
-#define UART_LSR_TX_FIFO_E_EMPTY        BIT5
-#define UART_LSR_RX_FIFO_E_MASK         BIT0
-#define UART_LSR_RX_FIFO_E_NOT_EMPTY    BIT0
-#define UART_LSR_RX_FIFO_E_EMPTY        (0UL << 0)



-// BIT2:BIT0
-#define UART_MDR1_MODE_SELECT_DISABLE   (7UL)
-#define UART_MDR1_MODE_SELECT_UART_16X  (0UL)



-#endif // __OMAP3530UART_H__
diff --git a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Usb.h b/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Usb.h
deleted file mode 100644
index 5d64cafc577d..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/Omap3530/Omap3530Usb.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP3530USB_H__
-#define __OMAP3530USB_H__



-#define USB_BASE            (0x48060000)



-#define UHH_SYSCONFIG       (USB_BASE + 0x4010)
-#define UHH_HOSTCONFIG      (USB_BASE + 0x4040)
-#define UHH_SYSSTATUS       (USB_BASE + 0x4014)



-#define USB_EHCI_HCCAPBASE  (USB_BASE + 0x4800)



-#define UHH_SYSCONFIG_MIDLEMODE_NO_STANDBY  BIT12
-#define UHH_SYSCONFIG_CLOCKACTIVITY_ON      BIT8
-#define UHH_SYSCONFIG_SIDLEMODE_NO_STANDBY  BIT3
-#define UHH_SYSCONFIG_ENAWAKEUP_ENABLE      BIT2
-#define UHH_SYSCONFIG_SOFTRESET             BIT1
-#define UHH_SYSCONFIG_AUTOIDLE_ALWAYS_RUN   (0UL <<  0)



-#define UHH_HOSTCONFIG_P3_CONNECT_STATUS_DISCONNECT (0UL << 10)
-#define UHH_HOSTCONFIG_P2_CONNECT_STATUS_DISCONNECT (0UL <<  9)
-#define UHH_HOSTCONFIG_P1_CONNECT_STATUS_DISCONNECT (0UL <<  8)
-#define UHH_HOSTCONFIG_ENA_INCR_ALIGN_DISABLE       (0UL <<  5)
-#define UHH_HOSTCONFIG_ENA_INCR16_ENABLE            BIT4
-#define UHH_HOSTCONFIG_ENA_INCR8_ENABLE             BIT3
-#define UHH_HOSTCONFIG_ENA_INCR4_ENABLE             BIT2
-#define UHH_HOSTCONFIG_AUTOPPD_ON_OVERCUR_EN_ON     (0UL <<  1)
-#define UHH_HOSTCONFIG_P1_ULPI_BYPASS_ULPI_MODE     (0UL <<  0)



-#define UHH_SYSSTATUS_RESETDONE                (BIT0 | BIT1 | BIT2)



-#endif // __OMAP3530USB_H__





diff --git a/Chips/TexasInstruments/Omap35xx/Include/TPS65950.h b/Chips/TexasInstruments/Omap35xx/Include/TPS65950.h
deleted file mode 100644
index 1db8b6db4617..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Include/TPS65950.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __TPS65950_H__
-#define __TPS65950_H__



-#define EXTERNAL_DEVICE_REGISTER_TO_SLAVE_ADDRESS(x)     (((x) >> 8) & 0xFF)
-#define EXTERNAL_DEVICE_REGISTER_TO_REGISTER(x)          ((x) & 0xFF)
-#define EXTERNAL_DEVICE_REGISTER(SlaveAddress, Register) (((SlaveAddress) & 0xFF) << 8 | ((Register) & 0xFF))



-// I2C Address group
-#define I2C_ADDR_GRP_ID1      0x48
-#define I2C_ADDR_GRP_ID2      0x49
-#define I2C_ADDR_GRP_ID3      0x4A
-#define I2C_ADDR_GRP_ID4      0x4B
-#define I2C_ADDR_GRP_ID5      0x12



-// MMC definitions.
-#define VMMC1_DEV_GRP         0x82
-#define DEV_GRP_P1            BIT5



-#define VMMC1_DEDICATED_REG   0x85
-#define VSEL_1_85V            0x0
-#define VSEL_2_85V            0x1
-#define VSEL_3_00V            0x2
-#define VSEL_3_15V            0x3



-#define TPS65950_GPIO_CTRL    0xaa  //I2C_ADDR_GRP_ID2
-#define CARD_DETECT_ENABLE    (BIT2 | BIT0) // GPIO ON + GPIO CD1 enabled




-#define GPIODATAIN1           0x98  //I2C_ADDR_GRP_ID2
-#define CARD_DETECT_BIT       BIT0



-// LEDEN register
-#define LEDEN                 0xEE
-#define LEDAON                BIT0
-#define LEDBON                BIT1
-#define LEDAPWM               BIT4
-#define LEDBPWM               BIT5



-// RTC registers
-#define SECONDS_REG           0x1C
-#define MINUTES_REG           0x1D
-#define HOURS_REG             0x1E
-#define DAYS_REG              0x1F
-#define MONTHS_REG            0x20
-#define YEARS_REG             0x21
-#define WEEKS_REG             0x22
-#define RTC_CTRL_REG          0x29



-// USB PHY power
-#define VAUX2_DEDICATED       0x79
-#define VAUX2_DEV_GRP         0x76



-#define VAUX_DEV_GRP_NONE     0x00
-#define VAUX_DEV_GRP_P1       0x20
-#define VAUX_DEV_GRP_P2       0x40
-#define VAUX_DEV_GRP_P3       0x80
-#define VAUX_DEDICATED_18V    0x05



-// Display subsystem
-#define VPLL2_DEDICATED       0x91
-#define VPLL2_DEV_GRP         0x8E



-#define GPIODATADIR1          0x9B
-#define SETGPIODATAOUT1       0xA4



-#endif //__TPS65950_H__
diff --git a/Chips/TexasInstruments/Omap35xx/InterruptDxe/HardwareInterrupt.c b/Chips/TexasInstruments/Omap35xx/InterruptDxe/HardwareInterrupt.c
deleted file mode 100644
index 09e22b5921b0..000000000000
--- a/Chips/TexasInstruments/Omap35xx/InterruptDxe/HardwareInterrupt.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/** @file

Handle OMAP35xx interrupt controller

Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/
-#include <PiDxe.h>



-#include <Library/BaseLib.h>
-#include <Library/DebugLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiLib.h>
-#include <Library/PcdLib.h>
-#include <Library/IoLib.h>
-#include <Library/ArmLib.h>



-#include <Protocol/Cpu.h>
-#include <Protocol/HardwareInterrupt.h>



-#include <Omap3530/Omap3530.h>



-//
-// Notifications
-//
-EFI_EVENT EfiExitBootServicesEvent      = (EFI_EVENT)NULL;




-HARDWARE_INTERRUPT_HANDLER  gRegisteredInterruptHandlers[INT_NROF_VECTORS];



-/**

Shutdown our hardware

DXE Core will disable interrupts and turn off the timer and disable interrupts
after all the event handlers have run.

@param[in]  Event   The Event that is being processed
@param[in]  Context Event Context

-**/
-VOID
-EFIAPI
-ExitBootServicesEvent (

IN EFI_EVENT  Event,
IN VOID       *Context
)

-{

// Disable all interrupts
MmioWrite32 (INTCPS_MIR(0), 0xFFFFFFFF);
MmioWrite32 (INTCPS_MIR(1), 0xFFFFFFFF);
MmioWrite32 (INTCPS_MIR(2), 0xFFFFFFFF);
MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);

// Add code here to disable all FIQs as debugger may have turned one on

-}



-/**

Register Handler for the specified interrupt source.

@param This     Instance pointer for this protocol
@param Source   Hardware source of the interrupt
@param Handler  Callback for interrupt. NULL to unregister

@retval EFI_SUCCESS Source was updated to support Handler.
@retval EFI_DEVICE_ERROR  Hardware could not be programmed.


-**/
-EFI_STATUS
-EFIAPI
-RegisterInterruptSource (

IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,
IN HARDWARE_INTERRUPT_SOURCE          Source,
IN HARDWARE_INTERRUPT_HANDLER         Handler
)

-{

if (Source > MAX_VECTOR) {
ASSERT(FALSE);
return EFI_UNSUPPORTED;
}

if ((MmioRead32 (INTCPS_ILR(Source)) & INTCPS_ILR_FIQ) == INTCPS_ILR_FIQ) {
// This vector has been programmed as FIQ so we can't use it for IRQ
// EFI does not use FIQ, but the debugger can use it to check for
// ctrl-c. So this ASSERT means you have a conflict with the debug agent
ASSERT (FALSE);
return EFI_UNSUPPORTED;
}

if ((Handler == NULL) && (gRegisteredInterruptHandlers[Source] == NULL)) {
return EFI_INVALID_PARAMETER;
}

if ((Handler != NULL) && (gRegisteredInterruptHandlers[Source] != NULL)) {
return EFI_ALREADY_STARTED;
}

gRegisteredInterruptHandlers[Source] = Handler;
return This->EnableInterruptSource(This, Source);

-}




-/**

Enable interrupt source Source.

@param This     Instance pointer for this protocol
@param Source   Hardware source of the interrupt

@retval EFI_SUCCESS       Source interrupt enabled.
@retval EFI_DEVICE_ERROR  Hardware could not be programmed.


-**/
-EFI_STATUS
-EFIAPI
-EnableInterruptSource (

IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,
IN HARDWARE_INTERRUPT_SOURCE          Source
)

-{

UINTN Bank;
UINTN Bit;

if (Source > MAX_VECTOR) {
ASSERT(FALSE);
return EFI_UNSUPPORTED;
}

Bank = Source / 32;
Bit  = 1UL << (Source % 32);

MmioWrite32 (INTCPS_MIR_CLEAR(Bank), Bit);

return EFI_SUCCESS;

-}




-/**

Disable interrupt source Source.

@param This     Instance pointer for this protocol
@param Source   Hardware source of the interrupt

@retval EFI_SUCCESS       Source interrupt disabled.
@retval EFI_DEVICE_ERROR  Hardware could not be programmed.


-**/
-EFI_STATUS
-EFIAPI
-DisableInterruptSource (

IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,
IN HARDWARE_INTERRUPT_SOURCE          Source
)

-{

UINTN Bank;
UINTN Bit;

if (Source > MAX_VECTOR) {
ASSERT(FALSE);
return EFI_UNSUPPORTED;
}

Bank = Source / 32;
Bit  = 1UL << (Source % 32);

MmioWrite32 (INTCPS_MIR_SET(Bank), Bit);

return EFI_SUCCESS;

-}





-/**

Return current state of interrupt source Source.

@param This     Instance pointer for this protocol
@param Source   Hardware source of the interrupt
@param InterruptState  TRUE: source enabled, FALSE: source disabled.

@retval EFI_SUCCESS       InterruptState is valid
@retval EFI_DEVICE_ERROR  InterruptState is not valid


-**/
-EFI_STATUS
-EFIAPI
-GetInterruptSourceState (

IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,
IN HARDWARE_INTERRUPT_SOURCE          Source,
IN BOOLEAN                            *InterruptState
)

-{

UINTN Bank;
UINTN Bit;

if (InterruptState == NULL) {
return EFI_INVALID_PARAMETER;
}

if (Source > MAX_VECTOR) {
ASSERT(FALSE);
return EFI_UNSUPPORTED;
}

Bank = Source / 32;
Bit  = 1UL << (Source % 32);

if ((MmioRead32(INTCPS_MIR(Bank)) & Bit) == Bit) {
*InterruptState = FALSE;
} else {
*InterruptState = TRUE;
}

return EFI_SUCCESS;

-}



-/**

Signal to the hardware that the End Of Intrrupt state
has been reached.

@param This     Instance pointer for this protocol
@param Source   Hardware source of the interrupt

@retval EFI_SUCCESS       Source interrupt EOI'ed.
@retval EFI_DEVICE_ERROR  Hardware could not be programmed.


-**/
-EFI_STATUS
-EFIAPI
-EndOfInterrupt (

IN EFI_HARDWARE_INTERRUPT_PROTOCOL    *This,
IN HARDWARE_INTERRUPT_SOURCE          Source
)

-{

MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
ArmDataSynchronizationBarrier ();
return EFI_SUCCESS;

-}




-/**

EFI_CPU_INTERRUPT_HANDLER that is called when a processor interrupt occurs.

@param  InterruptType    Defines the type of interrupt or exception that
                      occurred on the processor.This parameter is processor architecture specific.


@param  SystemContext    A pointer to the processor context when
                      the interrupt occurred on the processor.



@return None


-**/
-VOID
-EFIAPI
-IrqInterruptHandler (

IN EFI_EXCEPTION_TYPE           InterruptType,
IN EFI_SYSTEM_CONTEXT           SystemContext
)

-{

UINT32                     Vector;
HARDWARE_INTERRUPT_HANDLER InterruptHandler;

Vector = MmioRead32 (INTCPS_SIR_IRQ) & INTCPS_SIR_IRQ_MASK;

// Needed to prevent infinite nesting when Time Driver lowers TPL
MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
ArmDataSynchronizationBarrier ();

InterruptHandler = gRegisteredInterruptHandlers[Vector];
if (InterruptHandler != NULL) {
// Call the registered interrupt handler.
InterruptHandler (Vector, SystemContext);
}

// Needed to clear after running the handler
MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
ArmDataSynchronizationBarrier ();

-}



-//
-// Making this global saves a few bytes in image size
-//
-EFI_HANDLE  gHardwareInterruptHandle = NULL;



-//
-// The protocol instance produced by this driver
-//
-EFI_HARDWARE_INTERRUPT_PROTOCOL gHardwareInterruptProtocol = {

RegisterInterruptSource,
EnableInterruptSource,
DisableInterruptSource,
GetInterruptSourceState,
EndOfInterrupt

-};



-/**

Initialize the state information for the CPU Architectural Protocol

@param  ImageHandle   of the loaded driver
@param  SystemTable   Pointer to the System Table

@retval EFI_SUCCESS           Protocol registered
@retval EFI_OUT_OF_RESOURCES  Cannot allocate protocol data structure
@retval EFI_DEVICE_ERROR      Hardware problems


-**/
-EFI_STATUS
-InterruptDxeInitialize (

IN EFI_HANDLE         ImageHandle,
IN EFI_SYSTEM_TABLE   *SystemTable
)

-{

EFI_STATUS  Status;
EFI_CPU_ARCH_PROTOCOL   *Cpu;

// Make sure the Interrupt Controller Protocol is not already installed in the system.
ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gHardwareInterruptProtocolGuid);

// Make sure all interrupts are disabled by default.
MmioWrite32 (INTCPS_MIR(0), 0xFFFFFFFF);
MmioWrite32 (INTCPS_MIR(1), 0xFFFFFFFF);
MmioWrite32 (INTCPS_MIR(2), 0xFFFFFFFF);
MmioOr32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);

Status = gBS->InstallMultipleProtocolInterfaces(&gHardwareInterruptHandle,
                                             &gHardwareInterruptProtocolGuid,   &gHardwareInterruptProtocol,


                                             NULL);


ASSERT_EFI_ERROR(Status);

//
// Get the CPU protocol that this driver requires.
//
Status = gBS->LocateProtocol(&gEfiCpuArchProtocolGuid, NULL, (VOID **)&Cpu);
ASSERT_EFI_ERROR(Status);

//
// Unregister the default exception handler.
//
Status = Cpu->RegisterInterruptHandler(Cpu, EXCEPT_ARM_IRQ, NULL);
ASSERT_EFI_ERROR(Status);

//
// Register to receive interrupts
//
Status = Cpu->RegisterInterruptHandler(Cpu, EXCEPT_ARM_IRQ, IrqInterruptHandler);
ASSERT_EFI_ERROR(Status);

// Register for an ExitBootServicesEvent
Status = gBS->CreateEvent(EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_NOTIFY, ExitBootServicesEvent, NULL, &EfiExitBootServicesEvent);
ASSERT_EFI_ERROR(Status);

return Status;

-}



diff --git a/Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf b/Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf
deleted file mode 100644
index 76276dd3601d..000000000000
--- a/Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf
+++ /dev/null
@@ -1,54 +0,0 @@
-#/** @file
-#
-#  Interrupt DXE driver
-#
-#  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = Omap35xxBoardInterruptDxe
FILE_GUID                      = 23eed05d-1b93-4a1a-8e1b-931d69e37952
MODULE_TYPE                    = DXE_DRIVER
VERSION_STRING                 = 1.0

ENTRY_POINT                    = InterruptDxeInitialize



-[Sources.common]

HardwareInterrupt.c



-[Packages]

ArmPkg/ArmPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec
MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec


-[LibraryClasses]

BaseLib
UefiLib
UefiBootServicesTableLib
DebugLib
PrintLib
UefiDriverEntryPoint
IoLib
ArmLib


-[Protocols]

gHardwareInterruptProtocolGuid
gEfiCpuArchProtocolGuid


-[FixedPcd.common]

gEmbeddedTokenSpaceGuid.PcdInterruptBaseAddress


-[Depex]

gEfiCpuArchProtocolGuid

diff --git a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputBlt.c b/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputBlt.c
deleted file mode 100644
index 418328afe496..000000000000
--- a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputBlt.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/** @file


Copyright (c) 2011, ARM Ltd. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/


-#include <PiDxe.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/DevicePathLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiRuntimeServicesTableLib.h>
-#include <Library/MemoryAllocationLib.h>



-#include <Guid/GlobalVariable.h>



-#include "LcdGraphicsOutputDxe.h"



-extern BOOLEAN mDisplayInitialized;



-//
-// Function Definitions
-//



-STATIC
-EFI_STATUS
-VideoCopyNoHorizontalOverlap (

IN UINTN          BitsPerPixel,
IN volatile VOID  *FrameBufferBase,
IN UINT32         HorizontalResolution,
IN UINTN          SourceX,
IN UINTN          SourceY,
IN UINTN          DestinationX,
IN UINTN          DestinationY,
IN UINTN          Width,
IN UINTN          Height
)

-{

EFI_STATUS    Status = EFI_SUCCESS;
UINTN         SourceLine;
UINTN         DestinationLine;
UINTN         WidthInBytes;
UINTN         LineCount;
INTN          Step;
VOID          *SourceAddr;
VOID          *DestinationAddr;

if( DestinationY <= SourceY ) {
// scrolling up (or horizontally but without overlap)
SourceLine       = SourceY;
DestinationLine  = DestinationY;
Step             = 1;
} else {
// scrolling down
SourceLine       = SourceY + Height;
DestinationLine  = DestinationY + Height;
Step             = -1;
}

WidthInBytes = Width * 2;

for( LineCount = 0; LineCount < Height; LineCount++ ) {
// Update the start addresses of source & destination using 16bit pointer arithmetic
SourceAddr      = (VOID *)((UINT16 *)FrameBufferBase + SourceLine      * HorizontalResolution + SourceX     );
DestinationAddr = (VOID *)((UINT16 *)FrameBufferBase + DestinationLine * HorizontalResolution + DestinationX);

// Copy the entire line Y from video ram to the temp buffer
CopyMem( DestinationAddr, SourceAddr, WidthInBytes);

// Update the line numbers
SourceLine      += Step;
DestinationLine += Step;
}

return Status;

-}



-STATIC
-EFI_STATUS
-VideoCopyHorizontalOverlap (

IN UINTN          BitsPerPixel,
IN volatile VOID  *FrameBufferBase,
UINT32            HorizontalResolution,
IN UINTN          SourceX,
IN UINTN          SourceY,
IN UINTN          DestinationX,
IN UINTN          DestinationY,
IN UINTN          Width,
IN UINTN          Height
)

-{

EFI_STATUS      Status = EFI_SUCCESS;

UINT16 *PixelBuffer16bit;
UINT16 *SourcePixel16bit;
UINT16 *DestinationPixel16bit;

UINT32          SourcePixelY;
UINT32          DestinationPixelY;
UINTN           SizeIn16Bits;

// Allocate a temporary buffer
PixelBuffer16bit = (UINT16 *) AllocatePool((Height * Width) * sizeof(UINT16));

if (PixelBuffer16bit == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto EXIT;
}

// Access each pixel inside the source area of the Video Memory and copy it to the temp buffer

SizeIn16Bits = Width * 2;

for (SourcePixelY = SourceY, DestinationPixel16bit = PixelBuffer16bit;
  SourcePixelY < SourceY + Height;


  SourcePixelY++, DestinationPixel16bit += Width)


{
// Calculate the source address:
SourcePixel16bit = (UINT16 *)FrameBufferBase + SourcePixelY * HorizontalResolution + SourceX;

// Copy the entire line Y from Video to the temp buffer
CopyMem( (VOID *)DestinationPixel16bit, (CONST VOID *)SourcePixel16bit, SizeIn16Bits);
}

// Copy from the temp buffer into the destination area of the Video Memory

for (DestinationPixelY = DestinationY, SourcePixel16bit = PixelBuffer16bit;
  DestinationPixelY < DestinationY + Height;


  DestinationPixelY++, SourcePixel16bit += Width)


{
// Calculate the target address:
DestinationPixel16bit = (UINT16 *)FrameBufferBase + (DestinationPixelY * HorizontalResolution + DestinationX);

// Copy the entire line Y from the temp buffer to Video
CopyMem( (VOID *)DestinationPixel16bit, (CONST VOID *)SourcePixel16bit, SizeIn16Bits);
}

// Free the allocated memory
FreePool((VOID *) PixelBuffer16bit);



-EXIT:

return Status;

-}



-STATIC
-EFI_STATUS
-BltVideoFill (

IN EFI_GRAPHICS_OUTPUT_PROTOCOL        *This,
IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL   *EfiSourcePixel,     OPTIONAL
IN UINTN                               SourceX,
IN UINTN                               SourceY,
IN UINTN                               DestinationX,
IN UINTN                               DestinationY,
IN UINTN                               Width,
IN UINTN                               Height,
IN UINTN                               Delta           OPTIONAL   // Number of BYTES in a row of the BltBuffer
)

-{

EFI_PIXEL_BITMASK*  PixelInformation;
EFI_STATUS          Status;
UINT32              HorizontalResolution;
VOID                *FrameBufferBase;
UINT16              *DestinationPixel16bit;
UINT16              Pixel16bit;
UINT32              DestinationPixelX;
UINT32              DestinationLine;

Status           = EFI_SUCCESS;
PixelInformation = &This->Mode->Info->PixelInformation;
FrameBufferBase = (UINTN *)((UINTN)(This->Mode->FrameBufferBase));
HorizontalResolution = This->Mode->Info->HorizontalResolution;

// Convert the EFI pixel at the start of the BltBuffer(0,0) into a video display pixel
Pixel16bit = (UINT16) (
 ( (EfiSourcePixel->Red      <<  8) & PixelInformation->RedMask      )


| ( (EfiSourcePixel->Green    <<  3) & PixelInformation->GreenMask    )
| ( (EfiSourcePixel->Blue     >>  3) & PixelInformation->BlueMask     )
);

// Copy the SourcePixel into every pixel inside the target rectangle
for (DestinationLine = DestinationY;
  DestinationLine < DestinationY + Height;


  DestinationLine++)


{
for (DestinationPixelX = DestinationX;
    DestinationPixelX < DestinationX + Width;


    DestinationPixelX++)


{
 // Calculate the target address:


 DestinationPixel16bit =  (UINT16 *)FrameBufferBase + DestinationLine * HorizontalResolution  + DestinationPixelX;



 // Copy the pixel into the new target


 *DestinationPixel16bit = Pixel16bit;


}
}


return Status;

-}



-STATIC
-EFI_STATUS
-BltVideoToBltBuffer (

IN EFI_GRAPHICS_OUTPUT_PROTOCOL        *This,
IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL   *BltBuffer,     OPTIONAL
IN UINTN                               SourceX,
IN UINTN                               SourceY,
IN UINTN                               DestinationX,
IN UINTN                               DestinationY,
IN UINTN                               Width,
IN UINTN                               Height,
IN UINTN                               Delta           OPTIONAL   // Number of BYTES in a row of the BltBuffer
)

-{

EFI_STATUS         Status;
UINT32             HorizontalResolution;
EFI_PIXEL_BITMASK  *PixelInformation;
EFI_GRAPHICS_OUTPUT_BLT_PIXEL *EfiDestinationPixel;
VOID               *FrameBufferBase;
UINT16             *SourcePixel16bit;
UINT16             Pixel16bit;
UINT32             SourcePixelX;
UINT32             SourceLine;
UINT32             DestinationPixelX;
UINT32             DestinationLine;
UINT32             BltBufferHorizontalResolution;

Status = EFI_SUCCESS;
PixelInformation = &This->Mode->Info->PixelInformation;
HorizontalResolution = This->Mode->Info->HorizontalResolution;
FrameBufferBase = (UINTN *)((UINTN)(This->Mode->FrameBufferBase));

if(( Delta != 0 ) && ( Delta != Width * sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL))) {
// Delta is not zero and it is different from the width.
// Divide it by the size of a pixel to find out the buffer's horizontal resolution.
BltBufferHorizontalResolution = (UINT32) (Delta / sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL));
} else {
BltBufferHorizontalResolution = Width;
}

// Access each pixel inside the Video Memory
for (SourceLine = SourceY, DestinationLine = DestinationY;
  SourceLine < SourceY + Height;


  SourceLine++, DestinationLine++)


{
for (SourcePixelX = SourceX, DestinationPixelX = DestinationX;
    SourcePixelX < SourceX + Width;


    SourcePixelX++, DestinationPixelX++)


{
 // Calculate the source and target addresses:


 SourcePixel16bit = (UINT16 *)FrameBufferBase + SourceLine * HorizontalResolution + SourcePixelX;


 EfiDestinationPixel = BltBuffer + DestinationLine * BltBufferHorizontalResolution + DestinationPixelX;



 // Snapshot the pixel from the video buffer once, to speed up the operation.


 // If we were dereferencing the pointer, as it is volatile, we would perform 3 memory read operations.


 Pixel16bit = *SourcePixel16bit;



 // Copy the pixel into the new target


 EfiDestinationPixel->Red      = (UINT8) ( (Pixel16bit & PixelInformation->RedMask     ) >>  8 );


 EfiDestinationPixel->Green    = (UINT8) ( (Pixel16bit & PixelInformation->GreenMask   ) >>  3 );


 EfiDestinationPixel->Blue     = (UINT8) ( (Pixel16bit & PixelInformation->BlueMask    ) <<  3 );


}
}

return Status;

-}



-STATIC
-EFI_STATUS
-BltBufferToVideo (

IN EFI_GRAPHICS_OUTPUT_PROTOCOL        *This,
IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL   *BltBuffer,     OPTIONAL
IN UINTN                               SourceX,
IN UINTN                               SourceY,
IN UINTN                               DestinationX,
IN UINTN                               DestinationY,
IN UINTN                               Width,
IN UINTN                               Height,
IN UINTN                               Delta           OPTIONAL   // Number of BYTES in a row of the BltBuffer
)

-{

EFI_STATUS         Status;
UINT32             HorizontalResolution;
EFI_PIXEL_BITMASK  *PixelInformation;
EFI_GRAPHICS_OUTPUT_BLT_PIXEL *EfiSourcePixel;
VOID               *FrameBufferBase;
UINT16             *DestinationPixel16bit;
UINT32             SourcePixelX;
UINT32             SourceLine;
UINT32             DestinationPixelX;
UINT32             DestinationLine;
UINT32             BltBufferHorizontalResolution;

Status = EFI_SUCCESS;
PixelInformation = &This->Mode->Info->PixelInformation;
HorizontalResolution = This->Mode->Info->HorizontalResolution;
FrameBufferBase = (UINTN *)((UINTN)(This->Mode->FrameBufferBase));

if(( Delta != 0 ) && ( Delta != Width * sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL))) {
// Delta is not zero and it is different from the width.
// Divide it by the size of a pixel to find out the buffer's horizontal resolution.
BltBufferHorizontalResolution = (UINT32) (Delta / sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL));
} else {
BltBufferHorizontalResolution = Width;
}

// Access each pixel inside the BltBuffer Memory
for (SourceLine = SourceY, DestinationLine = DestinationY;
  SourceLine < SourceY + Height;


  SourceLine++, DestinationLine++) {



for (SourcePixelX = SourceX, DestinationPixelX = DestinationX;
    SourcePixelX < SourceX + Width;


    SourcePixelX++, DestinationPixelX++)


{
 // Calculate the source and target addresses:


 EfiSourcePixel  = BltBuffer + SourceLine * BltBufferHorizontalResolution + SourcePixelX;


 DestinationPixel16bit = (UINT16 *)FrameBufferBase + DestinationLine * HorizontalResolution + DestinationPixelX;



 // Copy the pixel into the new target


 // Only the most significant bits will be copied across:


 // To convert from 8 bits to 5 bits per pixel we throw away the 3 least significant bits


   *DestinationPixel16bit = (UINT16) (


         ( (EfiSourcePixel->Red      <<  8) & PixelInformation->RedMask      )


       | ( (EfiSourcePixel->Green    <<  3) & PixelInformation->GreenMask    )


       | ( (EfiSourcePixel->Blue     >>  3) & PixelInformation->BlueMask     )


       );


 }


}

return Status;

-}



-STATIC
-EFI_STATUS
-BltVideoToVideo (

IN EFI_GRAPHICS_OUTPUT_PROTOCOL        *This,
IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL   *BltBuffer,     OPTIONAL
IN UINTN                               SourceX,
IN UINTN                               SourceY,
IN UINTN                               DestinationX,
IN UINTN                               DestinationY,
IN UINTN                               Width,
IN UINTN                               Height,
IN UINTN                               Delta           OPTIONAL   // Number of BYTES in a row of the BltBuffer
)

-{

EFI_STATUS         Status;
UINT32             HorizontalResolution;
UINTN              BitsPerPixel;
VOID               *FrameBufferBase;

BitsPerPixel = 16;

HorizontalResolution = This->Mode->Info->HorizontalResolution;
FrameBufferBase = (UINTN *)((UINTN)(This->Mode->FrameBufferBase));

//
// BltVideo to BltVideo:
//
//  Source is the Video Memory,
//  Destination is the Video Memory

FrameBufferBase = (UINTN *)((UINTN)(This->Mode->FrameBufferBase));

// The UEFI spec currently states:
// "There is no limitation on the overlapping of the source and destination rectangles"
// Therefore, we must be careful to avoid overwriting the source data
if( SourceY == DestinationY ) {
// Copying within the same height, e.g. horizontal shift
if( SourceX == DestinationX ) {
 // Nothing to do


 Status = EFI_SUCCESS;


} else if( ((SourceX>DestinationX)?(SourceX - DestinationX):(DestinationX - SourceX)) < Width ) {
 // There is overlap


 Status = VideoCopyHorizontalOverlap (BitsPerPixel, FrameBufferBase, HorizontalResolution, SourceX, SourceY, DestinationX, DestinationY, Width, Height );


} else {
 // No overlap


 Status = VideoCopyNoHorizontalOverlap (BitsPerPixel, FrameBufferBase, HorizontalResolution, SourceX, SourceY, DestinationX, DestinationY, Width, Height );


}
} else {
// Copying from different heights
Status = VideoCopyNoHorizontalOverlap (BitsPerPixel, FrameBufferBase, HorizontalResolution, SourceX, SourceY, DestinationX, DestinationY, Width, Height );
}

return Status;

-}



-EFI_STATUS
-EFIAPI
-LcdGraphicsBlt (

IN EFI_GRAPHICS_OUTPUT_PROTOCOL        *This,
IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL   *BltBuffer,     OPTIONAL
IN EFI_GRAPHICS_OUTPUT_BLT_OPERATION   BltOperation,
IN UINTN                               SourceX,
IN UINTN                               SourceY,
IN UINTN                               DestinationX,
IN UINTN                               DestinationY,
IN UINTN                               Width,
IN UINTN                               Height,
IN UINTN                               Delta           OPTIONAL   // Number of BYTES in a row of the BltBuffer
)

-{

EFI_STATUS    Status;
LCD_INSTANCE  *Instance;

Instance = LCD_INSTANCE_FROM_GOP_THIS(This);

if (!mDisplayInitialized) {
InitializeDisplay (Instance);
}

switch (BltOperation) {
case EfiBltVideoFill:
Status = BltVideoFill (This, BltBuffer, SourceX, SourceY, DestinationX, DestinationY, Width, Height, Delta);
break;

case EfiBltVideoToBltBuffer:
Status = BltVideoToBltBuffer (This, BltBuffer, SourceX, SourceY, DestinationX, DestinationY, Width, Height, Delta);
break;

case EfiBltBufferToVideo:
Status = BltBufferToVideo (This, BltBuffer, SourceX, SourceY, DestinationX, DestinationY, Width, Height, Delta);
break;

case EfiBltVideoToVideo:
Status = BltVideoToVideo (This, BltBuffer, SourceX, SourceY, DestinationX, DestinationY, Width, Height, Delta);
break;

case EfiGraphicsOutputBltOperationMax:
default:
DEBUG((DEBUG_ERROR, "LcdGraphicsBlt: Invalid Operation\n"));
Status = EFI_INVALID_PARAMETER;
break;

-}


return Status;

-}
diff --git a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c b/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c
deleted file mode 100644
index 4364dd71a02b..000000000000
--- a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/** @file


Copyright (c) 2011-2014, ARM Ltd. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include "LcdGraphicsOutputDxe.h"



-BOOLEAN mDisplayInitialized = FALSE;



-LCD_MODE LcdModes[] = {

{
0, 640, 480,
9, 4,
96, 16, 48,
2, 10, 33
},
{
1, 800, 600,
11, 2,
120, 56, 64,
5, 37, 22
},
{
2, 1024, 768,
6, 2,
96, 16, 48,
2, 10, 33
},

-};



-LCD_INSTANCE mLcdTemplate = {

LCD_INSTANCE_SIGNATURE,
NULL, // Handle
{ // ModeInfo
0, // Version
0, // HorizontalResolution
0, // VerticalResolution
PixelBltOnly, // PixelFormat
{
 0xF800, //RedMask;


 0x7E0, //GreenMask;


 0x1F, //BlueMask;


 0x0//ReservedMask


}, // PixelInformation
0, // PixelsPerScanLine
},
{ // Mode
3, // MaxMode;
0, // Mode;
NULL, // Info;
0, // SizeOfInfo;
0, // FrameBufferBase;
0 // FrameBufferSize;
},
{ // Gop
LcdGraphicsQueryMode,  // QueryMode
LcdGraphicsSetMode,    // SetMode
LcdGraphicsBlt,        // Blt
NULL                     // *Mode
},
{ // DevicePath
{
 {


   HARDWARE_DEVICE_PATH, HW_VENDOR_DP,


   { (UINT8) (sizeof(VENDOR_DEVICE_PATH)), (UINT8) ((sizeof(VENDOR_DEVICE_PATH)) >> 8) },


 },


 // Hardware Device Path for Lcd


 EFI_CALLER_ID_GUID // Use the driver's GUID


},
{
 END_DEVICE_PATH_TYPE,


 END_ENTIRE_DEVICE_PATH_SUBTYPE,


 { sizeof(EFI_DEVICE_PATH_PROTOCOL), 0}


}
}

-};



-EFI_STATUS
-LcdInstanceContructor (

OUT LCD_INSTANCE** NewInstance
)

-{

LCD_INSTANCE* Instance;

Instance = AllocateCopyPool (sizeof(LCD_INSTANCE), &mLcdTemplate);
if (Instance == NULL) {
return EFI_OUT_OF_RESOURCES;
}

Instance->Gop.Mode          = &Instance->Mode;
Instance->Mode.Info         = &Instance->ModeInfo;

*NewInstance = Instance;
return EFI_SUCCESS;

-}



-EFI_STATUS
-LcdPlatformGetVram (

OUT EFI_PHYSICAL_ADDRESS*  VramBaseAddress,
OUT UINTN*                 VramSize
)

-{

EFI_STATUS             Status;
EFI_CPU_ARCH_PROTOCOL  *Cpu;
UINTN                  MaxSize;

MaxSize = 0x500000;
*VramSize = MaxSize;

// Allocate VRAM from DRAM
Status = gBS->AllocatePages (AllocateAnyPages, EfiBootServicesData, EFI_SIZE_TO_PAGES((MaxSize)), VramBaseAddress);
if (EFI_ERROR(Status)) {
return Status;
}

// Ensure the Cpu architectural protocol is already installed
Status = gBS->LocateProtocol (&gEfiCpuArchProtocolGuid, NULL, (VOID **)&Cpu);
ASSERT_EFI_ERROR(Status);

// Mark the VRAM as un-cacheable. The VRAM is inside the DRAM, which is cacheable.
Status = Cpu->SetMemoryAttributes (Cpu, *VramBaseAddress, *VramSize, EFI_MEMORY_UC);
if (EFI_ERROR(Status)) {
gBS->FreePool (VramBaseAddress);
return Status;
}

return EFI_SUCCESS;

-}



-EFI_STATUS
-DssSetMode (

UINT32 VramBaseAddress,
UINTN  ModeNumber
)

-{

// Make sure the interface clock is running
MmioWrite32 (CM_ICLKEN_DSS, EN_DSS);

// Stop the functional clocks
MmioAnd32 (CM_FCLKEN_DSS, ~(EN_DSS1 | EN_DSS2 | EN_TV));

// Program the DSS clock divisor
MmioWrite32 (CM_CLKSEL_DSS, 0x1000 | (LcdModes[ModeNumber].DssDivisor));

// Start the functional clocks
MmioOr32 (CM_FCLKEN_DSS, (EN_DSS1 | EN_DSS2 | EN_TV));

// Wait for DSS to stabilize
gBS->Stall(1);

// Reset the subsystem
MmioWrite32(DSS_SYSCONFIG, DSS_SOFTRESET);
while (!(MmioRead32 (DSS_SYSSTATUS) & DSS_RESETDONE));

// Configure LCD parameters
MmioWrite32 (DISPC_SIZE_LCD,
          ((LcdModes[ModeNumber].HorizontalResolution - 1)


          | ((LcdModes[ModeNumber].VerticalResolution - 1) << 16))


         );


MmioWrite32 (DISPC_TIMING_H,
          ( (LcdModes[ModeNumber].HSync - 1)


          | ((LcdModes[ModeNumber].HFrontPorch - 1) << 8)


          | ((LcdModes[ModeNumber].HBackPorch - 1) << 20))


         );


MmioWrite32 (DISPC_TIMING_V,
          ( (LcdModes[ModeNumber].VSync - 1)


          | ((LcdModes[ModeNumber].VFrontPorch - 1) << 8)


          | ((LcdModes[ModeNumber].VBackPorch - 1) << 20))


         );



// Set the framebuffer to only load frames (no gamma tables)
MmioAnd32 (DISPC_CONFIG, CLEARLOADMODE);
MmioOr32  (DISPC_CONFIG, LOAD_FRAME_ONLY);

// Divisor for the pixel clock
MmioWrite32(DISPC_DIVISOR, ((1 << 16) | LcdModes[ModeNumber].DispcDivisor) );

// Set up the graphics layer
MmioWrite32 (DISPC_GFX_PRELD, 0x2D8);
MmioWrite32 (DISPC_GFX_BA0, VramBaseAddress);
MmioWrite32 (DISPC_GFX_SIZE,
          ((LcdModes[ModeNumber].HorizontalResolution - 1)


          | ((LcdModes[ModeNumber].VerticalResolution - 1) << 16))


         );



MmioWrite32(DISPC_GFX_ATTR, (GFXENABLE | RGB16 | BURSTSIZE16));

// Start it all
MmioOr32 (DISPC_CONTROL, (LCDENABLE | ACTIVEMATRIX | DATALINES24 | BYPASS_MODE | LCDENABLESIGNAL));
MmioOr32 (DISPC_CONTROL, GOLCD);

return EFI_SUCCESS;

-}



-EFI_STATUS
-HwInitializeDisplay (

UINTN VramBaseAddress,
UINTN VramSize
)

-{

EFI_STATUS    Status;
UINT8         Data;
EFI_TPL       OldTpl;
EMBEDDED_EXTERNAL_DEVICE   *gTPS65950;

// Enable power lines used by TFP410
Status = gBS->LocateProtocol (&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950);
ASSERT_EFI_ERROR (Status);

OldTpl = gBS->RaiseTPL(TPL_NOTIFY);
Data = VAUX_DEV_GRP_P1;
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VPLL2_DEV_GRP), 1, &Data);
ASSERT_EFI_ERROR(Status);

Data = VAUX_DEDICATED_18V;
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VPLL2_DEDICATED), 1, &Data);
ASSERT_EFI_ERROR (Status);

// Power up TFP410 (set GPIO2 on TPS - for BeagleBoard-xM)
Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, GPIODATADIR1), 1, &Data);
ASSERT_EFI_ERROR (Status);
Data |= BIT2;
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, GPIODATADIR1), 1, &Data);
ASSERT_EFI_ERROR (Status);

Data = BIT2;
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, SETGPIODATAOUT1), 1, &Data);
ASSERT_EFI_ERROR (Status);

gBS->RestoreTPL(OldTpl);

// Power up TFP410 (set GPIO 170 - for older BeagleBoards)
MmioAnd32 (GPIO6_BASE + GPIO_OE, ~BIT10);
MmioOr32  (GPIO6_BASE + GPIO_SETDATAOUT, BIT10);

return EFI_SUCCESS;

-}



-EFI_STATUS
-InitializeDisplay (

IN LCD_INSTANCE* Instance
)

-{

EFI_STATUS           Status;
UINTN                VramSize;
EFI_PHYSICAL_ADDRESS VramBaseAddress;

Status = LcdPlatformGetVram (&VramBaseAddress, &VramSize);
if (EFI_ERROR (Status)) {
return Status;
}

Instance->Mode.FrameBufferBase = VramBaseAddress;
Instance->Mode.FrameBufferSize = VramSize;

Status = HwInitializeDisplay((UINTN)VramBaseAddress, VramSize);
if (!EFI_ERROR (Status)) {
mDisplayInitialized = TRUE;
}

return Status;

-}



-EFI_STATUS
-EFIAPI
-LcdGraphicsQueryMode (

IN EFI_GRAPHICS_OUTPUT_PROTOCOL            *This,
IN UINT32                                  ModeNumber,
OUT UINTN                                  *SizeOfInfo,
OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION   **Info
)

-{

LCD_INSTANCE  *Instance;

Instance = LCD_INSTANCE_FROM_GOP_THIS(This);

if (!mDisplayInitialized) {
InitializeDisplay (Instance);
}

// Error checking
if ( (This == NULL) || (Info == NULL) || (SizeOfInfo == NULL) || (ModeNumber >= This->Mode->MaxMode) ) {
DEBUG((DEBUG_ERROR, "LcdGraphicsQueryMode: ERROR - For mode number %d : Invalid Parameter.\n", ModeNumber ));
return EFI_INVALID_PARAMETER;
}

*Info = AllocateCopyPool(sizeof (EFI_GRAPHICS_OUTPUT_MODE_INFORMATION), &Instance->ModeInfo);
if (*Info == NULL) {
return EFI_OUT_OF_RESOURCES;
}

*SizeOfInfo = sizeof (EFI_GRAPHICS_OUTPUT_MODE_INFORMATION);

(*Info)->Version = 0;
(*Info)->HorizontalResolution = LcdModes[ModeNumber].HorizontalResolution;
(*Info)->VerticalResolution = LcdModes[ModeNumber].VerticalResolution;
(*Info)->PixelFormat = PixelBltOnly;

return EFI_SUCCESS;

-}



-EFI_STATUS
-EFIAPI
-LcdGraphicsSetMode (

IN EFI_GRAPHICS_OUTPUT_PROTOCOL   *This,
IN UINT32                         ModeNumber
)

-{

LCD_INSTANCE  *Instance;

Instance = LCD_INSTANCE_FROM_GOP_THIS(This);

if (ModeNumber >= Instance->Mode.MaxMode) {
return EFI_UNSUPPORTED;
}

if (!mDisplayInitialized) {
InitializeDisplay (Instance);
}

DssSetMode((UINT32)Instance->Mode.FrameBufferBase, ModeNumber);

Instance->Mode.Mode = ModeNumber;
Instance->ModeInfo.HorizontalResolution = LcdModes[ModeNumber].HorizontalResolution;
Instance->ModeInfo.VerticalResolution = LcdModes[ModeNumber].VerticalResolution;

return EFI_SUCCESS;

-}



-EFI_STATUS
-EFIAPI
-LcdGraphicsOutputDxeInitialize (

IN EFI_HANDLE         ImageHandle,
IN EFI_SYSTEM_TABLE   *SystemTable
)

-{

EFI_STATUS Status = EFI_SUCCESS;
LCD_INSTANCE* Instance;

Status = LcdInstanceContructor (&Instance);
if (EFI_ERROR(Status)) {
goto EXIT;
}

// Install the Graphics Output Protocol and the Device Path
Status = gBS->InstallMultipleProtocolInterfaces(
        &Instance->Handle,


        &gEfiGraphicsOutputProtocolGuid, &Instance->Gop,


        &gEfiDevicePathProtocolGuid,     &Instance->DevicePath,


        NULL


        );



if (EFI_ERROR(Status)) {
DEBUG((DEBUG_ERROR, "GraphicsOutputDxeInitialize: Can not install the protocol. Exit Status=%r\n", Status));
goto EXIT;
}

// Register for an ExitBootServicesEvent
// When ExitBootServices starts, this function here will make sure that the graphics driver will shut down properly,
// i.e. it will free up all allocated memory and perform any necessary hardware re-configuration.
/*Status = gBS->CreateEvent (
          EVT_SIGNAL_EXIT_BOOT_SERVICES,


          TPL_NOTIFY,


          LcdGraphicsExitBootServicesEvent, NULL,


          &Instance->ExitBootServicesEvent


          );



if (EFI_ERROR(Status)) {
DEBUG((DEBUG_ERROR, "GraphicsOutputDxeInitialize: Can not install the ExitBootServicesEvent handler. Exit Status=%r\n", Status));
goto EXIT_ERROR_UNINSTALL_PROTOCOL;
}*/

// To get here, everything must be fine, so just exit
goto EXIT;


-//EXIT_ERROR_UNINSTALL_PROTOCOL:

/* The following function could return an error message,

however, to get here something must have gone wrong already,



so preserve the original error, i.e. don't change



the Status variable, even it fails to uninstall the protocol.


*/
/*  gBS->UninstallMultipleProtocolInterfaces (
   Instance->Handle,


   &gEfiGraphicsOutputProtocolGuid, &Instance->Gop, // Uninstall Graphics Output protocol


   &gEfiDevicePathProtocolGuid,     &Instance->DevicePath,     // Uninstall device path


   NULL


   );*/




-EXIT:

return Status;


-}
diff --git a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.h b/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.h
deleted file mode 100644
index a1bd7afdb023..000000000000
--- a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/** @file


Copyright (c) 2011, ARM Ltd. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __OMAP3_DSS_GRAPHICS__
-#define __OMAP3_DSS_GRAPHICS__



-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiLib.h>
-#include <Library/DebugLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/IoLib.h>



-#include <Protocol/DevicePathToText.h>
-#include <Protocol/EmbeddedExternalDevice.h>
-#include <Protocol/Cpu.h>



-#include <Guid/GlobalVariable.h>



-#include <Omap3530/Omap3530.h>
-#include <TPS65950.h>



-typedef struct {

VENDOR_DEVICE_PATH            Guid;
EFI_DEVICE_PATH_PROTOCOL      End;

-} LCD_GRAPHICS_DEVICE_PATH;



-typedef struct {

UINTN                                 Signature;
EFI_HANDLE                            Handle;
EFI_GRAPHICS_OUTPUT_MODE_INFORMATION  ModeInfo;
EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE     Mode;
EFI_GRAPHICS_OUTPUT_PROTOCOL          Gop;
LCD_GRAPHICS_DEVICE_PATH              DevicePath;

-//  EFI_EVENT                             ExitBootServicesEvent;
-} LCD_INSTANCE;



-#define LCD_INSTANCE_SIGNATURE  SIGNATURE_32('l', 'c', 'd', '0')
-#define LCD_INSTANCE_FROM_GOP_THIS(a)     CR (a, LCD_INSTANCE, Gop, LCD_INSTANCE_SIGNATURE)



-typedef struct {

UINTN             Mode;
UINTN             HorizontalResolution;
UINTN             VerticalResolution;

UINT32            DssDivisor;
UINT32            DispcDivisor;

UINT32            HSync;
UINT32            HFrontPorch;
UINT32            HBackPorch;

UINT32            VSync;
UINT32            VFrontPorch;
UINT32            VBackPorch;

-} LCD_MODE;



-EFI_STATUS
-InitializeDisplay (

IN LCD_INSTANCE* Instance

-);



-EFI_STATUS
-EFIAPI
-LcdGraphicsQueryMode (

IN  EFI_GRAPHICS_OUTPUT_PROTOCOL          *This,
IN  UINT32                                ModeNumber,
OUT UINTN                                 *SizeOfInfo,
OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION  **Info

-);



-EFI_STATUS
-EFIAPI
-LcdGraphicsSetMode (

IN EFI_GRAPHICS_OUTPUT_PROTOCOL  *This,
IN UINT32                        ModeNumber

-);



-EFI_STATUS
-EFIAPI
-LcdGraphicsBlt (

IN EFI_GRAPHICS_OUTPUT_PROTOCOL        *This,
IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL   *BltBuffer,     OPTIONAL
IN EFI_GRAPHICS_OUTPUT_BLT_OPERATION   BltOperation,
IN UINTN                               SourceX,
IN UINTN                               SourceY,
IN UINTN                               DestinationX,
IN UINTN                               DestinationY,
IN UINTN                               Width,
IN UINTN                               Height,
IN UINTN                               Delta           OPTIONAL   // Number of BYTES in a row of the BltBuffer

-);



-// HW registers
-#define CM_FCLKEN_DSS   0x48004E00
-#define CM_ICLKEN_DSS   0x48004E10



-#define DSS_CONTROL     0x48050040
-#define DSS_SYSCONFIG   0x48050010
-#define DSS_SYSSTATUS   0x48050014



-#define DISPC_CONTROL   0x48050440
-#define DISPC_CONFIG    0x48050444
-#define DISPC_SIZE_LCD  0x4805047C
-#define DISPC_TIMING_H  0x48050464
-#define DISPC_TIMING_V  0x48050468



-#define CM_CLKSEL_DSS   0x48004E40
-#define DISPC_DIVISOR   0x48050470
-#define DISPC_POL_FREQ  0x4805046C



-#define DISPC_GFX_TABLE_BA 0x480504B8
-#define DISPC_GFX_BA0   0x48050480
-#define DISPC_GFX_BA1   0x48050484
-#define DISPC_GFX_POS   0x48050488
-#define DISPC_GFX_SIZE  0x4805048C
-#define DISPC_GFX_ATTR  0x480504A0
-#define DISPC_GFX_PRELD 0x4805062C



-#define DISPC_DEFAULT_COLOR_0 0x4805044C



-//#define DISPC_IRQSTATUS



-// Bits
-#define EN_TV           0x4
-#define EN_DSS2         0x2
-#define EN_DSS1         0x1
-#define EN_DSS          0x1



-#define DSS_SOFTRESET   0x2
-#define DSS_RESETDONE   0x1



-#define BYPASS_MODE     (BIT15 | BIT16)



-#define LCDENABLE       BIT0
-#define ACTIVEMATRIX    BIT3
-#define GOLCD           BIT5
-#define DATALINES24     (BIT8 | BIT9)
-#define LCDENABLESIGNAL BIT28



-#define GFXENABLE       BIT0
-#define RGB16           (0x6 << 1)
-#define BURSTSIZE16     (0x2 << 6)



-#define CLEARLOADMODE   ~(BIT2 | BIT1)
-#define LOAD_FRAME_ONLY BIT2



-#endif
diff --git a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf b/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
deleted file mode 100644
index 1fec2dbbac6f..000000000000
--- a/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
+++ /dev/null
@@ -1,52 +0,0 @@
-#/** @file
-#
-#  Copyright (c) 2011, ARM Ltd. All rights reserved.<BR>
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = LcdGraphicsDxe
FILE_GUID                      = E68088EF-D1A4-4336-C1DB-4D3A204730A6
MODULE_TYPE                    = DXE_DRIVER
VERSION_STRING                 = 1.0
ENTRY_POINT                    = LcdGraphicsOutputDxeInitialize


-[Sources.common]

LcdGraphicsOutputDxe.c
LcdGraphicsOutputBlt.c


-[Packages]

MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
ArmPkg/ArmPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec
EmbeddedPkg/EmbeddedPkg.dec


-[LibraryClasses]

ArmLib
UefiLib
BaseLib
DebugLib
TimerLib
UefiDriverEntryPoint
UefiBootServicesTableLib
IoLib
BaseMemoryLib


-[Protocols]

gEfiDevicePathProtocolGuid
gEfiGraphicsOutputProtocolGuid
gEfiDevicePathToTextProtocolGuid
gEmbeddedExternalDeviceProtocolGuid


-[Depex]

gEfiCpuArchProtocolGuid AND gEfiTimerArchProtocolGuid

diff --git a/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.c b/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.c
deleted file mode 100755
index 11f0bdd117af..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/** @file

Debug Agent timer lib for OMAP 35xx.

Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/
-#include <Base.h>
-#include <Library/BaseLib.h>
-#include <Library/IoLib.h>
-#include <Library/OmapLib.h>
-#include <Library/ArmLib.h>
-#include <Library/PcdLib.h>



-#include <Omap3530/Omap3530.h>




-volatile UINT32 gVector;



-// Cached registers
-volatile UINT32 gTISR;
-volatile UINT32 gTCLR;
-volatile UINT32 gTLDR;
-volatile UINT32 gTCRR;
-volatile UINT32 gTIER;



-VOID
-EnableInterruptSource (

VOID
)

-{

UINTN Bank;
UINTN Bit;

// Map vector to FIQ, IRQ is default
MmioWrite32 (INTCPS_ILR (gVector), 1);

Bank = gVector / 32;
Bit  = 1UL << (gVector % 32);

MmioWrite32 (INTCPS_MIR_CLEAR(Bank), Bit);

-}



-VOID
-DisableInterruptSource (

VOID
)

-{

UINTN Bank;
UINTN Bit;

Bank = gVector / 32;
Bit  = 1UL << (gVector % 32);

MmioWrite32 (INTCPS_MIR_SET(Bank), Bit);

-}





-/**

Setup all the hardware needed for the debug agents timer.

This function is used to set up debug enviroment. It may enable interrupts.


-**/
-VOID
-EFIAPI
-DebugAgentTimerIntialize (

VOID
)

-{

UINT32      TimerBaseAddress;
UINT32      TimerNumber;

TimerNumber = PcdGet32(PcdOmap35xxDebugAgentTimer);
gVector = InterruptVectorForTimer (TimerNumber);

// Set up the timer registers
TimerBaseAddress = TimerBase (TimerNumber);
gTISR = TimerBaseAddress + GPTIMER_TISR;
gTCLR = TimerBaseAddress + GPTIMER_TCLR;
gTLDR = TimerBaseAddress + GPTIMER_TLDR;
gTCRR = TimerBaseAddress + GPTIMER_TCRR;
gTIER = TimerBaseAddress + GPTIMER_TIER;

if ((TimerNumber < 2) || (TimerNumber > 9)) {
// This code assumes one the General Purpose timers is used
// GPT2 - GPT9
CpuDeadLoop ();
}
// Set source clock for GPT2 - GPT9 to SYS_CLK
MmioOr32 (CM_CLKSEL_PER, 1 << (TimerNumber - 2));


-}




-/**

Set the period for the debug agent timer. Zero means disable the timer.

@param[in] TimerPeriodMilliseconds    Frequency of the debug agent timer.


-**/
-VOID
-EFIAPI
-DebugAgentTimerSetPeriod (

IN  UINT32  TimerPeriodMilliseconds
)

-{

UINT64      TimerCount;
INT32       LoadValue;

if (TimerPeriodMilliseconds == 0) {
// Turn off GPTIMER3
MmioWrite32 (gTCLR, TCLR_ST_OFF);

DisableInterruptSource ();
} else {
// Calculate required timer count
TimerCount = DivU64x32(TimerPeriodMilliseconds * 1000000, PcdGet32(PcdDebugAgentTimerFreqNanoSeconds));

// Set GPTIMER5 Load register
LoadValue = (INT32) -TimerCount;
MmioWrite32 (gTLDR, LoadValue);
MmioWrite32 (gTCRR, LoadValue);

// Enable Overflow interrupt
MmioWrite32 (gTIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_ENABLE | TIER_MAT_IT_DISABLE);

// Turn on GPTIMER3, it will reload at overflow
MmioWrite32 (gTCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON);

EnableInterruptSource ();
}

-}




-/**

Perform End Of Interrupt for the debug agent timer. This is called in the
interrupt handler after the interrupt has been processed.


-**/
-VOID
-EFIAPI
-DebugAgentTimerEndOfInterrupt (

VOID
)

-{

// Clear all timer interrupts
MmioWrite32 (gTISR, TISR_CLEAR_ALL);

// Poll interrupt status bits to ensure clearing
while ((MmioRead32 (gTISR) & TISR_ALL_INTERRUPT_MASK) != TISR_NO_INTERRUPTS_PENDING);

MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWFIQAGR);
ArmDataSynchronizationBarrier ();


-}



diff --git a/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.inf b/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.inf
deleted file mode 100755
index bf09b1155c1d..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.inf
+++ /dev/null
@@ -1,46 +0,0 @@
-#/** @file
-# Component description file for Base PCI Cf8 Library.
-#
-# PCI CF8 Library that uses I/O ports 0xCF8 and 0xCFC to perform PCI Configuration cycles.
-#  Layers on top of an I/O Library instance.
-# Copyright (c) 2007, Intel Corporation. All rights reserved.<BR>
-#
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution. The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = DebugAgentTimerLibNull
FILE_GUID                      = E82F99DE-74ED-4e56-BBA1-B143FCA3F69A
MODULE_TYPE                    = BASE
VERSION_STRING                 = 1.0
LIBRARY_CLASS                  = DebugAgentTimerLib|SEC BASE DXE_CORE



-[Sources.common]

DebugAgentTimerLib.c



-[Packages]

MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec
ArmPkg/ArmPkg.dec



-[LibraryClasses]

BaseLib
IoLib
OmapLib
ArmLib


-[Pcd]

gOmap35xxTokenSpaceGuid.PcdOmap35xxDebugAgentTimer
gOmap35xxTokenSpaceGuid.PcdDebugAgentTimerFreqNanoSeconds

diff --git a/Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.c b/Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.c
deleted file mode 100644
index 47161755de84..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/** @file

Add custom commands for BeagleBoard development.

Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include <PiDxe.h>
-#include <Library/ArmLib.h>
-#include <Library/CacheMaintenanceLib.h>
-#include <Library/EblCmdLib.h>
-#include <Library/BaseLib.h>
-#include <Library/DebugLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiRuntimeServicesTableLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiLib.h>
-#include <Library/PcdLib.h>
-#include <Library/EfiFileLib.h>




-//PcdEmbeddedFdBaseAddress



-/**

Fill Me In

Argv[0] - "%CommandName%"

@param  Argc   Number of command arguments in Argv
@param  Argv   Array of strings that represent the parsed command line.
            Argv[0] is the command name



@return EFI_SUCCESS


-**/
-EFI_STATUS
-EblEdk2Cmd (

IN UINTN  Argc,
IN CHAR8  **Argv
)

-{

return EFI_SUCCESS;

-}




-GLOBAL_REMOVE_IF_UNREFERENCED const EBL_COMMAND_TABLE mLibCmdTemplate[] =
-{

{
"edk2",
" filename ; Load FD into memory and boot from it",
NULL,
EblEdk2Cmd
}

-};




-VOID
-EblInitializeExternalCmd (

VOID
)

-{

EblAddCommands (mLibCmdTemplate, sizeof (mLibCmdTemplate)/sizeof (EBL_COMMAND_TABLE));
return;

-}
diff --git a/Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.inf b/Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.inf
deleted file mode 100644
index dd7a13cf6629..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/EblCmdLib/EblCmdLib.inf
+++ /dev/null
@@ -1,48 +0,0 @@
-#/** @file
-# Component description file for the entry point to a EFIDXE Drivers
-#
-# Library to abstract Framework extensions that conflict with UEFI 2.0 Specification
-# Copyright (c) 2007 - 2007, Intel Corporation. All rights reserved.<BR>
-#
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution. The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = BeagleBoardEblCmdLib
FILE_GUID                      = ea62bdc3-1063-425f-8851-98cb47f213a8
MODULE_TYPE                    = UEFI_DRIVER
VERSION_STRING                 = 1.0
LIBRARY_CLASS                  = EblCmdLib|DXE_DRIVER UEFI_APPLICATION UEFI_DRIVER



-#
-# The following information is for reference only and not required by the build tools.
-#
-#  VALID_ARCHITECTURES           = IA32 X64 IPF EBC
-#



-[Sources.common]

EblCmdLib.c


-[Packages]

MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
ArmPkg/ArmPkg.dec


-[LibraryClasses]

BaseLib
DebugLib


-[Protocols]



-[Guids]



-[Pcd]
diff --git a/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.c b/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.c
deleted file mode 100644
index dcc518244a42..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/** @file

Basic serial IO abstaction for GDB

Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include <Uefi.h>
-#include <Library/GdbSerialLib.h>
-#include <Library/PcdLib.h>
-#include <Library/IoLib.h>
-#include <Library/DebugLib.h>
-#include <Library/OmapLib.h>
-#include <Omap3530/Omap3530.h>



-RETURN_STATUS
-EFIAPI
-GdbSerialLibConstructor (

VOID
)

-{

return RETURN_SUCCESS;

-}



-RETURN_STATUS
-EFIAPI
-GdbSerialInit (

IN UINT64     BaudRate,
IN UINT8      Parity,
IN UINT8      DataBits,
IN UINT8      StopBits
)

-{

return RETURN_SUCCESS;

-}



-BOOLEAN
-EFIAPI
-GdbIsCharAvailable (

VOID
)

-{

UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG;

if ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_NOT_EMPTY) {
return TRUE;
} else {
return FALSE;
}

-}



-CHAR8
-EFIAPI
-GdbGetChar (

VOID
)

-{

UINT32  LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG;
UINT32  RBR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_RBR_REG;
CHAR8   Char;

while ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_EMPTY);
Char = MmioRead8(RBR);

return Char;

-}



-VOID
-EFIAPI
-GdbPutChar (

IN  CHAR8   Char
)

-{

UINT32  LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG;
UINT32  THR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_THR_REG;

while ((MmioRead8(LSR) & UART_LSR_TX_FIFO_E_MASK) == UART_LSR_TX_FIFO_E_NOT_EMPTY);
MmioWrite8(THR, Char);

-}



-VOID
-GdbPutString (

IN CHAR8  *String
)

-{

while (*String != '\0') {
GdbPutChar (*String);
String++;
}

-}






diff --git a/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.inf b/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.inf
deleted file mode 100644
index 2cacd0f0e6c7..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.inf
+++ /dev/null
@@ -1,41 +0,0 @@
-#/** @file
-#
-#  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = GdbSerialLib
FILE_GUID                      = E2423349-EF5D-439B-95F5-8B8D8E3B443F
MODULE_TYPE                    = BASE
VERSION_STRING                 = 1.0
LIBRARY_CLASS                  = GdbSerialLib

CONSTRUCTOR                    = GdbSerialLibConstructor



-[Sources.common]

GdbSerialLib.c



-[Packages]

MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[LibraryClasses]

DebugLib
IoLib
OmapLib


-[FixedPcd]

gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart


diff --git a/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/Omap35xxTimerLib.inf b/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/Omap35xxTimerLib.inf
deleted file mode 100644
index e20b65477ad3..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/Omap35xxTimerLib.inf
+++ /dev/null
@@ -1,45 +0,0 @@
-#/** @file
-# Timer library implementation
-#
-# A non-functional instance of the Timer Library that can be used as a template
-#  for the implementation of a functional timer library instance. This library instance can
-#  also be used to test build DXE, Runtime, DXE SAL, and DXE SMM modules that require timer
-#  services as well as EBC modules that require timer services
-# Copyright (c) 2007, Intel Corporation. All rights reserved.<BR>
-#
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution. The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = BeagleBoardTimerLib
FILE_GUID                      = fe1d7183-9abb-42ce-9a3b-36d7c6a8959f
MODULE_TYPE                    = BASE
VERSION_STRING                 = 1.0
LIBRARY_CLASS                  = TimerLib


-[Sources.common]

TimerLib.c


-[Packages]

OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec
MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec


-[LibraryClasses]

DebugLib
OmapLib
IoLib


-[Pcd]

gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterFrequencyInHz
gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterPeriodInNanoseconds
gOmap35xxTokenSpaceGuid.PcdOmap35xxFreeTimer


diff --git a/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/TimerLib.c b/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/TimerLib.c
deleted file mode 100644
index 652c47b6f61a..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/TimerLib.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include <Uefi.h>



-#include <Library/BaseLib.h>
-#include <Library/TimerLib.h>
-#include <Library/DebugLib.h>
-#include <Library/PcdLib.h>
-#include <Library/IoLib.h>
-#include <Library/OmapLib.h>



-#include <Omap3530/Omap3530.h>



-RETURN_STATUS
-EFIAPI
-TimerConstructor (

VOID
)

-{

UINTN  Timer            = PcdGet32(PcdOmap35xxFreeTimer);
UINT32 TimerBaseAddress = TimerBase(Timer);

if ((MmioRead32 (TimerBaseAddress + GPTIMER_TCLR) & TCLR_ST_ON) == 0) {
// Set source clock for GPT3 & GPT4 to SYS_CLK
MmioOr32 (CM_CLKSEL_PER, CM_CLKSEL_PER_CLKSEL_GPT3_SYS | CM_CLKSEL_PER_CLKSEL_GPT4_SYS);

// Set count & reload registers
MmioWrite32 (TimerBaseAddress + GPTIMER_TCRR, 0x00000000);
MmioWrite32 (TimerBaseAddress + GPTIMER_TLDR, 0x00000000);

// Disable interrupts
MmioWrite32 (TimerBaseAddress + GPTIMER_TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_DISABLE | TIER_MAT_IT_DISABLE);

// Start Timer
MmioWrite32 (TimerBaseAddress + GPTIMER_TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON);

// Disable OMAP Watchdog timer (WDT2)
MmioWrite32 (WDTIMER2_BASE + WSPR, 0xAAAA);
DEBUG ((EFI_D_ERROR, "Magic delay to disable watchdog timers properly.\n"));
MmioWrite32 (WDTIMER2_BASE + WSPR, 0x5555);
}
return EFI_SUCCESS;

-}



-UINTN
-EFIAPI
-MicroSecondDelay (

IN  UINTN MicroSeconds
)

-{

UINT64  NanoSeconds;

NanoSeconds = MultU64x32(MicroSeconds, 1000);

while (NanoSeconds > (UINTN)-1) {
NanoSecondDelay((UINTN)-1);
NanoSeconds -= (UINTN)-1;
}

NanoSecondDelay(NanoSeconds);

return MicroSeconds;

-}



-UINTN
-EFIAPI
-NanoSecondDelay (

IN  UINTN NanoSeconds
)

-{

UINT32  Delay;
UINT32  StartTime;
UINT32  CurrentTime;
UINT32  ElapsedTime;
UINT32  TimerCountRegister;

Delay = (NanoSeconds / PcdGet32(PcdEmbeddedPerformanceCounterPeriodInNanoseconds)) + 1;

TimerCountRegister = TimerBase(PcdGet32(PcdOmap35xxFreeTimer)) + GPTIMER_TCRR;

StartTime = MmioRead32 (TimerCountRegister);

do
{
CurrentTime = MmioRead32 (TimerCountRegister);
ElapsedTime = CurrentTime - StartTime;
} while (ElapsedTime < Delay);

NanoSeconds = ElapsedTime * PcdGet32(PcdEmbeddedPerformanceCounterPeriodInNanoseconds);

return NanoSeconds;

-}



-UINT64
-EFIAPI
-GetPerformanceCounter (

VOID
)

-{

return (UINT64)MmioRead32 (TimerBase(PcdGet32(PcdOmap35xxFreeTimer)) + GPTIMER_TCRR);

-}



-UINT64
-EFIAPI
-GetPerformanceCounterProperties (

OUT UINT64  *StartValue,  OPTIONAL
OUT UINT64  *EndValue     OPTIONAL
)

-{

if (StartValue != NULL) {
// Timer starts with the reload value
*StartValue = (UINT64)MmioRead32 (TimerBase(PcdGet32(PcdOmap35xxFreeTimer)) + GPTIMER_TLDR);
}

if (EndValue != NULL) {
// Timer counts up to 0xFFFFFFFF
*EndValue = 0xFFFFFFFF;
}

return PcdGet64(PcdEmbeddedPerformanceCounterFrequencyInHz);

-}
diff --git a/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.c b/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.c
deleted file mode 100755
index 41cfefbebc11..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/** @file

Abstractions for simple OMAP DMA channel.


Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include <Base.h>
-#include <Library/DebugLib.h>
-#include <Library/OmapDmaLib.h>
-#include <Library/IoLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Omap3530/Omap3530.h>




-/**

Configure OMAP DMA Channel

@param  Channel               DMA Channel to configure
@param  Dma4                  Pointer to structure used to initialize DMA registers for the Channel

@retval EFI_SUCCESS           The range was mapped for the returned NumberOfBytes.
@retval EFI_INVALID_PARAMETER Channel is not valid
@retval EFI_DEVICE_ERROR      The system hardware could not map the requested information.


-**/
-EFI_STATUS
-EFIAPI
-EnableDmaChannel (

IN  UINTN       Channel,
IN  OMAP_DMA4   *DMA4
)

-{

UINT32  RegVal;


if (Channel > DMA4_MAX_CHANNEL) {
return EFI_INVALID_PARAMETER;
}

/* 1) Configure the transfer parameters in the logical DMA registers */
/*-------------------------------------------------------------------*/

/* a) Set the data type CSDP[1:0], the Read/Write Port access type
   CSDP[8:7]/[15:14], the Source/dest endianism CSDP[21]/CSDP[19],


   write mode CSDP[17:16], source/dest packed or nonpacked CSDP[6]/CSDP[13] */



// Read CSDP
RegVal = MmioRead32 (DMA4_CSDP (Channel));

// Build reg
RegVal = ((RegVal & ~ 0x3) | DMA4->DataType );
RegVal = ((RegVal & ~(0x3 <<  7)) | (DMA4->ReadPortAccessType << 7));
RegVal = ((RegVal & ~(0x3 << 14)) | (DMA4->WritePortAccessType << 14));
RegVal = ((RegVal & ~(0x1 << 21)) | (DMA4->SourceEndiansim << 21));
RegVal = ((RegVal & ~(0x1 << 19)) | (DMA4->DestinationEndianism << 19));
RegVal = ((RegVal & ~(0x3 << 16)) | (DMA4->WriteMode << 16));
RegVal = ((RegVal & ~(0x1 <<  6)) | (DMA4->SourcePacked << 6));
RegVal = ((RegVal & ~(0x1 << 13)) | (DMA4->DestinationPacked << 13));
// Write CSDP
MmioWrite32 (DMA4_CSDP (Channel), RegVal);

/* b) Set the number of element per frame CEN[23:0]*/
MmioWrite32 (DMA4_CEN (Channel), DMA4->NumberOfElementPerFrame);

/* c) Set the number of frame per block CFN[15:0]*/
MmioWrite32 (DMA4_CFN (Channel), DMA4->NumberOfFramePerTransferBlock);

/* d) Set the Source/dest start address index CSSA[31:0]/CDSA[31:0]*/
MmioWrite32 (DMA4_CSSA (Channel), DMA4->SourceStartAddress);
MmioWrite32 (DMA4_CDSA (Channel), DMA4->DestinationStartAddress);

/* e) Set the Read Port addressing mode CCR[13:12], the Write Port addressing mode CCR[15:14],
   read/write priority CCR[6]/CCR[26]


   I changed LCH CCR[20:19]=00 and CCR[4:0]=00000 to


   LCH CCR[20:19]= DMA4->WriteRequestNumber and CCR[4:0]=DMA4->ReadRequestNumber


*/

// Read CCR
RegVal = MmioRead32 (DMA4_CCR (Channel));

// Build reg
RegVal  = ((RegVal &  ~0x1f)            | DMA4->ReadRequestNumber);
RegVal  = ((RegVal &  ~(BIT20 | BIT19)) | DMA4->WriteRequestNumber << 19);
RegVal  = ((RegVal & ~(0x3 << 12)) | (DMA4->ReadPortAccessMode << 12));
RegVal  = ((RegVal & ~(0x3 << 14)) | (DMA4->WritePortAccessMode << 14));
RegVal  = ((RegVal & ~(0x1 <<  6)) | (DMA4->ReadPriority << 6));
RegVal  = ((RegVal & ~(0x1 << 26)) | (DMA4->WritePriority << 26));

// Write CCR
MmioWrite32 (DMA4_CCR (Channel), RegVal);

/* f)- Set the source element index CSEI[15:0]*/
MmioWrite32 (DMA4_CSEI (Channel), DMA4->SourceElementIndex);

/* - Set the source frame index CSFI[15:0]*/
MmioWrite32 (DMA4_CSFI (Channel), DMA4->SourceFrameIndex);


/* - Set the destination element index CDEI[15:0]*/
MmioWrite32 (DMA4_CDEI (Channel), DMA4->DestinationElementIndex);

/* - Set the destination frame index CDFI[31:0]*/
MmioWrite32 (DMA4_CDFI (Channel), DMA4->DestinationFrameIndex);

MmioWrite32 (DMA4_CDFI (Channel), DMA4->DestinationFrameIndex);

// Enable all the status bits since we are polling
MmioWrite32 (DMA4_CICR (Channel), DMA4_CICR_ENABLE_ALL);
MmioWrite32 (DMA4_CSR (Channel),  DMA4_CSR_RESET);

/* 2) Start the DMA transfer by Setting the enable bit CCR[7]=1 */
/*--------------------------------------------------------------*/
//write enable bit
MmioOr32 (DMA4_CCR(Channel), DMA4_CCR_ENABLE); //Launch transfer

return EFI_SUCCESS;

-}



-/**

Turn of DMA channel configured by EnableDma().

@param  Channel               DMA Channel to configure
@param  SuccesMask            Bits in DMA4_CSR register indicate EFI_SUCCESS
@param  ErrorMask             Bits in DMA4_CSR register indicate EFI_DEVICE_ERROR

@retval EFI_SUCCESS           DMA hardware disabled
@retval EFI_INVALID_PARAMETER Channel is not valid
@retval EFI_DEVICE_ERROR      The system hardware could not map the requested information.


-**/
-EFI_STATUS
-EFIAPI
-DisableDmaChannel (

IN  UINTN       Channel,
IN  UINT32      SuccessMask,
IN  UINT32      ErrorMask
)

-{

EFI_STATUS  Status = EFI_SUCCESS;
UINT32      Reg;


if (Channel > DMA4_MAX_CHANNEL) {
return EFI_INVALID_PARAMETER;
}

do {
Reg = MmioRead32 (DMA4_CSR(Channel));
if ((Reg & ErrorMask) != 0) {
 Status = EFI_DEVICE_ERROR;


 DEBUG ((EFI_D_ERROR, "DMA Error (%d) %x\n", Channel, Reg));


 break;


}
} while ((Reg & SuccessMask) != SuccessMask);


// Disable all status bits and clear them
MmioWrite32 (DMA4_CICR (Channel), 0);
MmioWrite32 (DMA4_CSR (Channel),  DMA4_CSR_RESET);

MmioAnd32 (DMA4_CCR(0), ~(DMA4_CCR_ENABLE | DMA4_CCR_RD_ACTIVE | DMA4_CCR_WR_ACTIVE));
return Status;

-}





diff --git a/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf b/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf
deleted file mode 100755
index 1893adf1180a..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf
+++ /dev/null
@@ -1,50 +0,0 @@
-#/** @file
-#
-#  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = OmapDmaLib
FILE_GUID                      = 09B17D99-BB07-49a8-B0D2-06D6AFCBE3AB
MODULE_TYPE                    = UEFI_DRIVER
VERSION_STRING                 = 1.0
LIBRARY_CLASS                  = OmapDmaLib



-[Sources.common]

OmapDmaLib.c


-[Packages]

MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
ArmPkg/ArmPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[LibraryClasses]

DebugLib
UefiBootServicesTableLib
MemoryAllocationLib
UncachedMemoryAllocationLib
IoLib
BaseMemoryLib
ArmLib



-[Protocols]

gEfiCpuArchProtocolGuid


-[Guids]



-[Pcd]



-[Depex]

gEfiCpuArchProtocolGuid

diff --git a/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.c b/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.c
deleted file mode 100644
index 29645ee55a91..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include <Base.h>
-#include <Library/DebugLib.h>
-#include <Library/OmapLib.h>
-#include <Omap3530/Omap3530.h>



-UINT32
-GpioBase (

IN  UINTN Port
)

-{

switch (Port) {
case 1:  return GPIO1_BASE;
case 2:  return GPIO2_BASE;
case 3:  return GPIO3_BASE;
case 4:  return GPIO4_BASE;
case 5:  return GPIO5_BASE;
case 6:  return GPIO6_BASE;
default: ASSERT(FALSE); return 0;
}

-}



-UINT32
-TimerBase (

IN  UINTN Timer
)

-{

switch (Timer) {
case  1: return GPTIMER1_BASE;
case  2: return GPTIMER2_BASE;
case  3: return GPTIMER3_BASE;
case  4: return GPTIMER4_BASE;
case  5: return GPTIMER5_BASE;
case  6: return GPTIMER6_BASE;
case  7: return GPTIMER7_BASE;
case  8: return GPTIMER8_BASE;
case  9: return GPTIMER9_BASE;
case 10: return GPTIMER10_BASE;
case 11: return GPTIMER11_BASE;
case 12: return GPTIMER12_BASE;
default: return 0;
}

-}



-UINTN
-InterruptVectorForTimer (

IN  UINTN Timer
)

-{

if ((Timer < 1) || (Timer > 12)) {
ASSERT(FALSE);
return 0xFFFFFFFF;
}

return 36 + Timer;

-}



-UINT32
-UartBase (

IN  UINTN Uart
)

-{

switch (Uart) {
case 1:  return UART1_BASE;
case 2:  return UART2_BASE;
case 3:  return UART3_BASE;
default: ASSERT(FALSE); return 0;
}

-}



diff --git a/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf b/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf
deleted file mode 100644
index b75d68696c66..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf
+++ /dev/null
@@ -1,37 +0,0 @@
-#/** @file
-#
-#  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = OmapLib
FILE_GUID                      = d035f5c2-1b92-4746-9f6c-5ff6202970df
MODULE_TYPE                    = UEFI_DRIVER
VERSION_STRING                 = 1.0
LIBRARY_CLASS                  = OmapLib


-[Sources.common]

OmapLib.c


-[Packages]

MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[LibraryClasses]

DebugLib


-[Protocols]



-[Guids]



-[Pcd]
diff --git a/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.c b/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.c
deleted file mode 100755
index 0ae452ebd7c1..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/** @file
-*
-*  Copyright (c) 2011, ARM Limited. All rights reserved.
-*
-*  This program and the accompanying materials
-*  are licensed and made available under the terms and conditions of the BSD License
-*  which accompanies this distribution.  The full text of the license may be found at
-*  http://opensource.org/licenses/bsd-license.php
-*
-*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-*
-**/



-#include <Uefi.h>



-#include <Library/BaseMemoryLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiRuntimeServicesTableLib.h>
-#include <Library/DebugLib.h>
-#include <Library/IoLib.h>



-#include <Protocol/RealTimeClock.h>
-#include <Protocol/EmbeddedExternalDevice.h>



-#include <Omap3530/Omap3530.h>
-#include <TPS65950.h>




-EMBEDDED_EXTERNAL_DEVICE   *gTPS65950;
-INT16                      TimeZone = EFI_UNSPECIFIED_TIMEZONE;



-/**

Returns the current time and date information, and the time-keeping capabilities
of the hardware platform.

@param  Time                  A pointer to storage to receive a snapshot of the current time.
@param  Capabilities          An optional pointer to a buffer to receive the real time clock
                           device's capabilities.



@retval EFI_SUCCESS           The operation completed successfully.
@retval EFI_INVALID_PARAMETER Time is NULL.
@retval EFI_DEVICE_ERROR      The time could not be retrieved due to hardware error.


-**/
-EFI_STATUS
-EFIAPI
-LibGetTime (

OUT EFI_TIME                *Time,
OUT EFI_TIME_CAPABILITIES   *Capabilities
)

-{

EFI_STATUS            Status;
UINT8                 Data;
EFI_TPL               OldTpl;

if (Time == NULL) {
return EFI_INVALID_PARAMETER;
}

OldTpl = gBS->RaiseTPL(TPL_NOTIFY);

/* Get time and date */
ZeroMem(Time, sizeof(EFI_TIME));

// Latch values
Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, RTC_CTRL_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;
Data |= BIT6;
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, RTC_CTRL_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;

// Read registers
Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, YEARS_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;
Time->Year = 2000 + ((Data >> 4) & 0xF) * 10 + (Data & 0xF);

Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, MONTHS_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;
Time->Month = ((Data >> 4) & 0x1) * 10 + (Data & 0xF);

Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, DAYS_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;
Time->Day = ((Data >> 4) & 0x3) * 10 + (Data & 0xF);

Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, HOURS_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;
Time->Hour = ((Data >> 4) & 0x3) * 10 + (Data & 0xF);

Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, MINUTES_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;
Time->Minute = ((Data >> 4) & 0x7) * 10 + (Data & 0xF);

Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, SECONDS_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;
Time->Second = ((Data >> 4) & 0x7) * 10 + (Data & 0xF);

Time->TimeZone = TimeZone;
// TODO: check what to use here
Time->Daylight = EFI_TIME_ADJUST_DAYLIGHT;

// Set capabilities

// TODO: Set real capabilities
if (Capabilities != NULL) {
Capabilities->Resolution = 1;
Capabilities->Accuracy = 50000000;
Capabilities->SetsToZero = FALSE;
}


-EXIT:

gBS->RestoreTPL(OldTpl);

return (Status == EFI_SUCCESS) ? Status : EFI_DEVICE_ERROR;

-}



-/**

Sets the current local time and date information.

@param  Time                  A pointer to the current time.

@retval EFI_SUCCESS           The operation completed successfully.
@retval EFI_INVALID_PARAMETER A time field is out of range.
@retval EFI_DEVICE_ERROR      The time could not be set due due to hardware error.


-**/
-EFI_STATUS
-EFIAPI
-LibSetTime (

IN EFI_TIME                *Time
)

-{

EFI_STATUS Status;
UINT8      Data;
UINT8      MonthDayCount[12] = { 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
EFI_TPL    OldTpl;

// Input validation according both to UEFI spec and hardware constraints
// UEFI spec says valid year range is 1900-9999 but TPS only supports 2000-2099
if ( (Time == NULL)
|| (Time->Year < 2000 || Time->Year > 2099)
|| (Time->Month < 1 || Time->Month > 12)
|| (Time->Day < 1 || Time->Day > MonthDayCount[Time->Month])
|| (Time->Hour > 23)
|| (Time->Minute > 59)
|| (Time->Second > 59)
|| (Time->Nanosecond > 999999999)
|| ((Time->TimeZone < -1440 || Time->TimeZone > 1440) && Time->TimeZone != 2047)
) {
return EFI_INVALID_PARAMETER;
}

OldTpl = gBS->RaiseTPL(TPL_NOTIFY);

Data = Time->Year - 2000;
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, YEARS_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;

Data = ((Time->Month / 10) << 4) | (Time->Month % 10);
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, MONTHS_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;

Data = ((Time->Day / 10) << 4) | (Time->Day % 10);
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, DAYS_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;

Data = ((Time->Hour / 10) << 4) | (Time->Hour % 10);
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, HOURS_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;

Data = ((Time->Minute / 10) << 4) | (Time->Minute % 10);
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, MINUTES_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;

Data = ((Time->Second / 10) << 4) | (Time->Second % 10);
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, SECONDS_REG), 1, &Data);
if (Status != EFI_SUCCESS) goto EXIT;

TimeZone = Time->TimeZone;


-EXIT:

gBS->RestoreTPL(OldTpl);

return (Status == EFI_SUCCESS) ? Status : EFI_DEVICE_ERROR;

-}



-/**

Returns the current wakeup alarm clock setting.

@param  Enabled               Indicates if the alarm is currently enabled or disabled.
@param  Pending               Indicates if the alarm signal is pending and requires acknowledgement.
@param  Time                  The current alarm setting.

@retval EFI_SUCCESS           The alarm settings were returned.
@retval EFI_INVALID_PARAMETER Any parameter is NULL.
@retval EFI_DEVICE_ERROR      The wakeup time could not be retrieved due to a hardware error.


-**/
-EFI_STATUS
-EFIAPI
-LibGetWakeupTime (

OUT BOOLEAN     *Enabled,
OUT BOOLEAN     *Pending,
OUT EFI_TIME    *Time
)

-{

return EFI_UNSUPPORTED;

-}



-/**

Sets the system wakeup alarm clock time.

@param  Enabled               Enable or disable the wakeup alarm.
@param  Time                  If Enable is TRUE, the time to set the wakeup alarm for.

@retval EFI_SUCCESS           If Enable is TRUE, then the wakeup alarm was enabled. If
                           Enable is FALSE, then the wakeup alarm was disabled.


@retval EFI_INVALID_PARAMETER A time field is out of range.
@retval EFI_DEVICE_ERROR      The wakeup time could not be set due to a hardware error.
@retval EFI_UNSUPPORTED       A wakeup timer is not supported on this platform.


-**/
-EFI_STATUS
-EFIAPI
-LibSetWakeupTime (

IN BOOLEAN      Enabled,
OUT EFI_TIME    *Time
)

-{

return EFI_UNSUPPORTED;

-}



-/**

This is the declaration of an EFI image entry point. This can be the entry point to an application
written to this specification, an EFI boot service driver, or an EFI runtime driver.

@param  ImageHandle           Handle that identifies the loaded image.
@param  SystemTable           System Table for this image.

@retval EFI_SUCCESS           The operation completed successfully.


-**/
-EFI_STATUS
-EFIAPI
-LibRtcInitialize (

IN EFI_HANDLE                            ImageHandle,
IN EFI_SYSTEM_TABLE                      *SystemTable
)

-{

EFI_STATUS    Status;
EFI_HANDLE    Handle;
UINT8         Data;
EFI_TPL       OldTpl;

Status = gBS->LocateProtocol (&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950);
ASSERT_EFI_ERROR(Status);

OldTpl = gBS->RaiseTPL(TPL_NOTIFY);
Data = 1;
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, RTC_CTRL_REG), 1, &Data);
ASSERT_EFI_ERROR(Status);
gBS->RestoreTPL(OldTpl);

// Setup the setters and getters
gRT->GetTime       = LibGetTime;
gRT->SetTime       = LibSetTime;
gRT->GetWakeupTime = LibGetWakeupTime;
gRT->SetWakeupTime = LibSetWakeupTime;

// Install the protocol
Handle = NULL;
Status = gBS->InstallMultipleProtocolInterfaces (
             &Handle,


             &gEfiRealTimeClockArchProtocolGuid,  NULL,


             NULL


            );



return Status;

-}



-/**

Fixup internal data so that EFI can be call in virtual mode.
Call the passed in Child Notify event and convert any pointers in
lib to virtual mode.

@param[in]    Event   The Event that is being processed
@param[in]    Context Event Context

-**/
-VOID
-EFIAPI
-LibRtcVirtualNotifyEvent (

IN EFI_EVENT        Event,
IN VOID             *Context
)

-{

return;

-}
diff --git a/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.inf b/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.inf
deleted file mode 100755
index 83edd86d6ccd..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.inf
+++ /dev/null
@@ -1,38 +0,0 @@
-#  Copyright (c) 2011, ARM Limited. All rights reserved.
-#
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = RealTimeClockLib
FILE_GUID                      = EC1713DB-7DB5-4c99-8FE2-6F52F95A1132
MODULE_TYPE                    = BASE
VERSION_STRING                 = 1.0
LIBRARY_CLASS                  = RealTimeClockLib


-[Sources.common]

RealTimeClockLib.c


-[Packages]

MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[LibraryClasses]

IoLib
UefiLib
DebugLib
PcdLib


-[Protocols]

gEmbeddedExternalDeviceProtocolGuid


-[depex]

gEmbeddedExternalDeviceProtocolGuid

diff --git a/Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.c b/Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.c
deleted file mode 100644
index 82f04eaad1c8..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/** @file

Template library implementation to support ResetSystem Runtime call.

Fill in the templates with what ever makes you system reset.


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/




-#include <PiDxe.h>



-#include <Library/PcdLib.h>
-#include <Library/ArmLib.h>
-#include <Library/CacheMaintenanceLib.h>
-#include <Library/DebugLib.h>
-#include <Library/EfiResetSystemLib.h>




-/**

Resets the entire platform.

@param  ResetType             The type of reset to perform.
@param  ResetStatus           The status code for the reset.
@param  DataSize              The size, in bytes, of WatchdogData.
@param  ResetData             For a ResetType of EfiResetCold, EfiResetWarm, or
                           EfiResetShutdown the data buffer starts with a Null-terminated


                           Unicode string, optionally followed by additional binary data.




-**/
-EFI_STATUS
-EFIAPI
-LibResetSystem (

IN EFI_RESET_TYPE   ResetType,
IN EFI_STATUS       ResetStatus,
IN UINTN            DataSize,
IN CHAR16           *ResetData OPTIONAL
)

-{

if (ResetData != NULL) {
DEBUG((EFI_D_ERROR, "%s", ResetData));
}

switch (ResetType) {
case EfiResetWarm:
// Map a warm reset into a cold reset
case EfiResetCold:
case EfiResetShutdown:
default:
// Perform cold reset of the system.
MmioOr32 (PRM_RSTCTRL, RST_DPLL3);
while ((MmioRead32 (PRM_RSTST) & GLOBAL_COLD_RST) != 0x1);
break;
}

// If the reset didn't work, return an error.
ASSERT (FALSE);
return EFI_DEVICE_ERROR;

-}





-/**

Initialize any infrastructure required for LibResetSystem () to function.

@param  ImageHandle   The firmware allocated handle for the EFI image.
@param  SystemTable   A pointer to the EFI System Table.

@retval EFI_SUCCESS   The constructor always returns EFI_SUCCESS.


-**/
-EFI_STATUS
-EFIAPI
-LibInitializeResetSystem (

IN EFI_HANDLE        ImageHandle,
IN EFI_SYSTEM_TABLE  *SystemTable
)

-{

return EFI_SUCCESS;

-}



diff --git a/Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.inf b/Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.inf
deleted file mode 100644
index 20496fa16735..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/ResetSystemLib/ResetSystemLib.inf
+++ /dev/null
@@ -1,40 +0,0 @@
-#/** @file
-# Reset System lib to make it easy to port new platforms
-#
-# Copyright (c) 2008, Apple Inc. All rights reserved.<BR>
-#
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution. The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = BeagleBoardResetSystemLib
FILE_GUID                      = 781371a2-3fdd-41d4-96a1-7b34cbc9e895
MODULE_TYPE                    = BASE
VERSION_STRING                 = 1.0
LIBRARY_CLASS                  = EfiResetSystemLib



-[Sources.common]

ResetSystemLib.c


-[Packages]

OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec
ArmPkg/ArmPkg.dec
MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec


-[Pcd.common]

gArmTokenSpaceGuid.PcdCpuResetAddress
gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress


-[LibraryClasses]

DebugLib
BeagleBoardSystemLib

diff --git a/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.c b/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.c
deleted file mode 100644
index 7ac12c729f57..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/** @file

Serial I/O Port library functions with no library constructor/destructor


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include <Base.h>
-#include <Library/DebugLib.h>
-#include <Library/SerialPortLib.h>
-#include <Library/PcdLib.h>
-#include <Library/IoLib.h>
-#include <Library/OmapLib.h>
-#include <Omap3530/Omap3530.h>



-/*


Programmed hardware of Serial port.

@return    Always return EFI_UNSUPPORTED.


-**/
-RETURN_STATUS
-EFIAPI
-SerialPortInitialize (

VOID
)

-{

// assume assembly code at reset vector has setup UART
return RETURN_SUCCESS;

-}



-/**

Write data to serial device.

@param  Buffer           Point of data buffer which need to be writed.
@param  NumberOfBytes    Number of output bytes which are cached in Buffer.

@retval 0                Write data failed.
@retval !0               Actual number of bytes writed to serial device.


-**/
-UINTN
-EFIAPI
-SerialPortWrite (

IN UINT8     *Buffer,
IN UINTN     NumberOfBytes

-)
-{

UINT32  LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG;
UINT32  THR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_THR_REG;
UINTN   Count;

for (Count = 0; Count < NumberOfBytes; Count++, Buffer++) {
while ((MmioRead8(LSR) & UART_LSR_TX_FIFO_E_MASK) == UART_LSR_TX_FIFO_E_NOT_EMPTY);
MmioWrite8(THR, *Buffer);
}

return NumberOfBytes;

-}




-/**

Read data from serial device and save the datas in buffer.

@param  Buffer           Point of data buffer which need to be writed.
@param  NumberOfBytes    Number of output bytes which are cached in Buffer.

@retval 0                Read data failed.
@retval !0               Aactual number of bytes read from serial device.


-**/
-UINTN
-EFIAPI
-SerialPortRead (

OUT UINT8     *Buffer,
IN  UINTN     NumberOfBytes

-)
-{

UINT32  LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG;
UINT32  RBR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_RBR_REG;
UINTN   Count;

for (Count = 0; Count < NumberOfBytes; Count++, Buffer++) {
while ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_EMPTY);
*Buffer = MmioRead8(RBR);
}

return NumberOfBytes;

-}




-/**

Check to see if any data is avaiable to be read from the debug device.

@retval EFI_SUCCESS       At least one byte of data is avaiable to be read
@retval EFI_NOT_READY     No data is avaiable to be read
@retval EFI_DEVICE_ERROR  The serial device is not functioning properly


-**/
-BOOLEAN
-EFIAPI
-SerialPortPoll (

VOID
)

-{

UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG;

if ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_NOT_EMPTY) {
return TRUE;
} else {
return FALSE;
}

-}



-/**

Sets the control bits on a serial device.

@param[in] Control            Sets the bits of Control that are settable.

@retval RETURN_SUCCESS        The new control bits were set on the serial device.
@retval RETURN_UNSUPPORTED    The serial device does not support this operation.
@retval RETURN_DEVICE_ERROR   The serial device is not functioning correctly.


-**/
-RETURN_STATUS
-EFIAPI
-SerialPortSetControl (

IN UINT32 Control
)

-{

return RETURN_UNSUPPORTED;

-}



-/**

Retrieve the status of the control bits on a serial device.

@param[out] Control           A pointer to return the current control signals from the serial device.

@retval RETURN_SUCCESS        The control bits were read from the serial device.
@retval RETURN_UNSUPPORTED    The serial device does not support this operation.
@retval RETURN_DEVICE_ERROR   The serial device is not functioning correctly.


-**/
-RETURN_STATUS
-EFIAPI
-SerialPortGetControl (

OUT UINT32 *Control
)

-{

*Control = 0;
if (!SerialPortPoll ()) {
*Control = EFI_SERIAL_INPUT_BUFFER_EMPTY;
}
return RETURN_SUCCESS;

-}



-/**

Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
data bits, and stop bits on a serial device.

@param BaudRate           The requested baud rate. A BaudRate value of 0 will use the
                       device's default interface speed.


                       On output, the value actually set.


@param ReveiveFifoDepth   The requested depth of the FIFO on the receive side of the
                       serial interface. A ReceiveFifoDepth value of 0 will use


                       the device's default FIFO depth.


                       On output, the value actually set.


@param Timeout            The requested time out for a single character in microseconds.
                       This timeout applies to both the transmit and receive side of the


                       interface. A Timeout value of 0 will use the device's default time


                       out value.


                       On output, the value actually set.


@param Parity             The type of parity to use on this serial device. A Parity value of
                       DefaultParity will use the device's default parity value.


                       On output, the value actually set.


@param DataBits           The number of data bits to use on the serial device. A DataBits
                       vaule of 0 will use the device's default data bit setting.


                       On output, the value actually set.


@param StopBits           The number of stop bits to use on this serial device. A StopBits
                       value of DefaultStopBits will use the device's default number of


                       stop bits.


                       On output, the value actually set.



@retval RETURN_SUCCESS            The new attributes were set on the serial device.
@retval RETURN_UNSUPPORTED        The serial device does not support this operation.
@retval RETURN_INVALID_PARAMETER  One or more of the attributes has an unsupported value.
@retval RETURN_DEVICE_ERROR       The serial device is not functioning correctly.


-**/
-RETURN_STATUS
-EFIAPI
-SerialPortSetAttributes (

IN OUT UINT64             *BaudRate,
IN OUT UINT32             *ReceiveFifoDepth,
IN OUT UINT32             *Timeout,
IN OUT EFI_PARITY_TYPE    *Parity,
IN OUT UINT8              *DataBits,
IN OUT EFI_STOP_BITS_TYPE *StopBits
)

-{

return RETURN_UNSUPPORTED;

-}



diff --git a/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.inf b/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.inf
deleted file mode 100644
index 3382ef75296f..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.inf
+++ /dev/null
@@ -1,44 +0,0 @@
-#/** @file
-# EDK Serial port lib
-#
-# Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
-#
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution. The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = BeagleBoardSerialPortLib
FILE_GUID                      = 97546cbd-c0ff-4c48-ab0b-e4f58862acd3
MODULE_TYPE                    = BASE
VERSION_STRING                 = 1.0
LIBRARY_CLASS                  = SerialPortLib



-#
-#  VALID_ARCHITECTURES           = ARM IA32 X64 IPF EBC
-#



-[Sources.common]

SerialPortLib.c


-[LibraryClasses]

DebugLib
IoLib
OmapLib


-[Packages]

EmbeddedPkg/EmbeddedPkg.dec
MdePkg/MdePkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[FixedPcd]

gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart


diff --git a/Chips/TexasInstruments/Omap35xx/License.txt b/Chips/TexasInstruments/Omap35xx/License.txt
deleted file mode 100755
index 05dbd3606dcc..000000000000
--- a/Chips/TexasInstruments/Omap35xx/License.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Copyright (c) 2009-2010, Apple Inc. All rights reserved.
-Copyright (c) 2011-2012, ARM Limited. All rights reserved.



-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:



-* Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

-* Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.


-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
diff --git a/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.c b/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.c
deleted file mode 100644
index 9f0ebe0f65d5..000000000000
--- a/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.c
+++ /dev/null
@@ -1,1494 +0,0 @@
-/** @file

MMC/SD Card driver for OMAP 35xx (SDIO not supported)

This driver always produces a BlockIo protocol but it starts off with no Media
present. A TimerCallBack detects when media is inserted or removed and after
a media change event a call to BlockIo ReadBlocks/WriteBlocks will cause the
media to be detected (or removed) and the BlockIo Media structure will get
updated. No MMC/SD Card harward registers are updated until the first BlockIo
ReadBlocks/WriteBlocks after media has been insterted (booting with a card
plugged in counts as an insertion event).

Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include "MMCHS.h"



-EFI_BLOCK_IO_MEDIA gMMCHSMedia = {

SIGNATURE_32('s','d','i','o'),            // MediaId
TRUE,                                     // RemovableMedia
FALSE,                                    // MediaPresent
FALSE,                                    // LogicalPartition
FALSE,                                    // ReadOnly
FALSE,                                    // WriteCaching
512,                                      // BlockSize
4,                                        // IoAlign
0,                                        // Pad
0                                         // LastBlock

-};



-typedef struct {

VENDOR_DEVICE_PATH  Mmc;
EFI_DEVICE_PATH     End;

-} MMCHS_DEVICE_PATH;



-MMCHS_DEVICE_PATH gMmcHsDevicePath = {

{
HARDWARE_DEVICE_PATH,
HW_VENDOR_DP,
(UINT8)(sizeof(VENDOR_DEVICE_PATH)),
(UINT8)((sizeof(VENDOR_DEVICE_PATH)) >> 8),
0xb615f1f5, 0x5088, 0x43cd, 0x80, 0x9c, 0xa1, 0x6e, 0x52, 0x48, 0x7d, 0x00
},
{
END_DEVICE_PATH_TYPE,
END_ENTIRE_DEVICE_PATH_SUBTYPE,
{ sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 }
}

-};



-CARD_INFO                  gCardInfo;
-EMBEDDED_EXTERNAL_DEVICE   *gTPS65950;
-EFI_EVENT                  gTimerEvent;
-BOOLEAN                    gMediaChange = FALSE;



-//
-// Internal Functions
-//




-VOID
-ParseCardCIDData (

UINT32 Response0,
UINT32 Response1,
UINT32 Response2,
UINT32 Response3
)

-{

gCardInfo.CIDData.MDT = ((Response0 >> 8) & 0xFFF);
gCardInfo.CIDData.PSN = (((Response0 >> 24) & 0xFF) | ((Response1 & 0xFFFFFF) << 8));
gCardInfo.CIDData.PRV = ((Response1 >> 24) & 0xFF);
gCardInfo.CIDData.PNM[4] = ((Response2) & 0xFF);
gCardInfo.CIDData.PNM[3] = ((Response2 >> 8) & 0xFF);
gCardInfo.CIDData.PNM[2] = ((Response2 >> 16) & 0xFF);
gCardInfo.CIDData.PNM[1] = ((Response2 >> 24) & 0xFF);
gCardInfo.CIDData.PNM[0] = ((Response3) & 0xFF);
gCardInfo.CIDData.OID = ((Response3 >> 8) & 0xFFFF);
gCardInfo.CIDData.MID = ((Response3 >> 24) & 0xFF);

-}




-VOID
-UpdateMMCHSClkFrequency (

UINTN NewCLKD
)

-{

//Set Clock enable to 0x0 to not provide the clock to the card
MmioAnd32 (MMCHS_SYSCTL, ~CEN);

//Set new clock frequency.
MmioAndThenOr32 (MMCHS_SYSCTL, ~CLKD_MASK, NewCLKD << 6);

//Poll till Internal Clock Stable
while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS);

//Set Clock enable to 0x1 to provide the clock to the card
MmioOr32 (MMCHS_SYSCTL, CEN);

-}




-EFI_STATUS
-SendCmd (

UINTN Cmd,
UINTN CmdInterruptEnableVal,
UINTN CmdArgument
)

-{

UINTN MmcStatus;
UINTN RetryCount = 0;

//Check if command line is in use or not. Poll till command line is available.
while ((MmioRead32 (MMCHS_PSTATE) & DATI_MASK) == DATI_NOT_ALLOWED);

//Provide the block size.
MmioWrite32 (MMCHS_BLK, BLEN_512BYTES);

//Setting Data timeout counter value to max value.
MmioAndThenOr32 (MMCHS_SYSCTL, ~DTO_MASK, DTO_VAL);

//Clear Status register.
MmioWrite32 (MMCHS_STAT, 0xFFFFFFFF);

//Set command argument register
MmioWrite32 (MMCHS_ARG, CmdArgument);

//Enable interrupt enable events to occur
MmioWrite32 (MMCHS_IE, CmdInterruptEnableVal);

//Send a command
MmioWrite32 (MMCHS_CMD, Cmd);

//Check for the command status.
while (RetryCount < MAX_RETRY_COUNT) {
do {
 MmcStatus = MmioRead32 (MMCHS_STAT);


} while (MmcStatus == 0);

//Read status of command response
if ((MmcStatus & ERRI) != 0) {

 //Perform soft-reset for mmci_cmd line.


 MmioOr32 (MMCHS_SYSCTL, SRC);


 while ((MmioRead32 (MMCHS_SYSCTL) & SRC));



 DEBUG ((EFI_D_INFO, "MmcStatus: %x\n", MmcStatus));


 return EFI_DEVICE_ERROR;


}

//Check if command is completed.
if ((MmcStatus & CC) == CC) {
 MmioWrite32 (MMCHS_STAT, CC);


 break;


}

RetryCount++;
}

if (RetryCount == MAX_RETRY_COUNT) {
return EFI_TIMEOUT;
}

return EFI_SUCCESS;

-}




-VOID
-GetBlockInformation (

UINTN *BlockSize,
UINTN *NumBlocks
)

-{

CSD_SDV2 *CsdSDV2Data;
UINTN    CardSize;

if (gCardInfo.CardType == SD_CARD_2_HIGH) {
CsdSDV2Data = (CSD_SDV2 *)&gCardInfo.CSDData;

//Populate BlockSize.
*BlockSize = (0x1UL << CsdSDV2Data->READ_BL_LEN);

//Calculate Total number of blocks.
CardSize = CsdSDV2Data->C_SIZELow16 | (CsdSDV2Data->C_SIZEHigh6 << 2);
*NumBlocks = ((CardSize + 1) * 1024);
} else {
//Populate BlockSize.
*BlockSize = (0x1UL << gCardInfo.CSDData.READ_BL_LEN);

//Calculate Total number of blocks.
CardSize = gCardInfo.CSDData.C_SIZELow2 | (gCardInfo.CSDData.C_SIZEHigh10 << 2);
*NumBlocks = (CardSize + 1) * (1 << (gCardInfo.CSDData.C_SIZE_MULT + 2));
}

//For >=2G card, BlockSize may be 1K, but the transfer size is 512 bytes.
if (*BlockSize > 512) {
*NumBlocks = MultU64x32(*NumBlocks, *BlockSize/2);
*BlockSize = 512;
}

DEBUG ((EFI_D_INFO, "Card type: %x, BlockSize: %x, NumBlocks: %x\n", gCardInfo.CardType, *BlockSize, *NumBlocks));

-}




-VOID
-CalculateCardCLKD (

UINTN *ClockFrequencySelect
)

-{

UINT8    MaxDataTransferRate;
UINTN    TransferRateValue = 0;
UINTN    TimeValue = 0 ;
UINTN    Frequency = 0;

MaxDataTransferRate = gCardInfo.CSDData.TRAN_SPEED;

// For SD Cards  we would need to send CMD6 to set
// speeds abouve 25MHz. High Speed mode 50 MHz and up

//Calculate Transfer rate unit (Bits 2:0 of TRAN_SPEED)
switch (MaxDataTransferRate & 0x7) {
case 0:
 TransferRateValue = 100 * 1000;


 break;



case 1:
 TransferRateValue = 1 * 1000 * 1000;


 break;



case 2:
 TransferRateValue = 10 * 1000 * 1000;


 break;



case 3:
 TransferRateValue = 100 * 1000 * 1000;


 break;



default:
 DEBUG((EFI_D_ERROR, "Invalid parameter.\n"));


 ASSERT(FALSE);


}

//Calculate Time value (Bits 6:3 of TRAN_SPEED)
switch ((MaxDataTransferRate >> 3) & 0xF) {
case 1:
 TimeValue = 10;


 break;



case 2:
 TimeValue = 12;


 break;



case 3:
 TimeValue = 13;


 break;



case 4:
 TimeValue = 15;


 break;



case 5:
 TimeValue = 20;


 break;



case 6:
 TimeValue = 25;


 break;



case 7:
 TimeValue = 30;


 break;



case 8:
 TimeValue = 35;


 break;



case 9:
 TimeValue = 40;


 break;



case 10:
 TimeValue = 45;


 break;



case 11:
 TimeValue = 50;


 break;



case 12:
 TimeValue = 55;


 break;



case 13:
 TimeValue = 60;


 break;



case 14:
 TimeValue = 70;


 break;



case 15:
 TimeValue = 80;


 break;



default:
 DEBUG((EFI_D_ERROR, "Invalid parameter.\n"));


 ASSERT(FALSE);


}

Frequency = TransferRateValue * TimeValue/10;

//Calculate Clock divider value to program in MMCHS_SYSCTL[CLKD] field.
*ClockFrequencySelect = ((MMC_REFERENCE_CLK/Frequency) + 1);

DEBUG ((EFI_D_INFO, "MaxDataTransferRate: 0x%x, Frequency: %d KHz, ClockFrequencySelect: %x\n", MaxDataTransferRate, Frequency/1000, *ClockFrequencySelect));

-}




-VOID
-GetCardConfigurationData (

VOID
)

-{

UINTN  BlockSize;
UINTN  NumBlocks;
UINTN  ClockFrequencySelect;

//Calculate BlockSize and Total number of blocks in the detected card.
GetBlockInformation(&BlockSize, &NumBlocks);
gCardInfo.BlockSize = BlockSize;
gCardInfo.NumBlocks = NumBlocks;

//Calculate Card clock divider value.
CalculateCardCLKD(&ClockFrequencySelect);
gCardInfo.ClockFrequencySelect = ClockFrequencySelect;

-}




-EFI_STATUS
-InitializeMMCHS (

VOID
)

-{

UINT8      Data = 0;
EFI_STATUS Status;

//Select Device group to belong to P1 device group in Power IC.
Data = DEV_GRP_P1;
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VMMC1_DEV_GRP), 1, &Data);
ASSERT_EFI_ERROR(Status);

//Configure voltage regulator for MMC1 in Power IC to output 3.0 voltage.
Data = VSEL_3_00V;
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VMMC1_DEDICATED_REG), 1, &Data);
ASSERT_EFI_ERROR(Status);

//After ramping up voltage, set VDDS stable bit to indicate that voltage level is stable.
MmioOr32 (CONTROL_PBIAS_LITE, (PBIASLITEVMODE0 | PBIASLITEPWRDNZ0 | PBIASSPEEDCTRL0 | PBIASLITEVMODE1 | PBIASLITEWRDNZ1));

// Enable WP GPIO
MmioAndThenOr32 (GPIO1_BASE + GPIO_OE, ~BIT23, BIT23);

// Enable Card Detect
Data = CARD_DETECT_ENABLE;
gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, TPS65950_GPIO_CTRL), 1, &Data);


return Status;

-}




-EFI_STATUS
-PerformCardIdenfication (

VOID
)

-{

EFI_STATUS Status;
UINTN      CmdArgument = 0;
UINTN      Response = 0;
UINTN      RetryCount = 0;
BOOLEAN    SDCmd8Supported = FALSE;

//Enable interrupts.
MmioWrite32 (MMCHS_IE, (BADA_EN | CERR_EN | DEB_EN | DCRC_EN | DTO_EN | CIE_EN |
CEB_EN | CCRC_EN | CTO_EN | BRR_EN | BWR_EN | TC_EN | CC_EN));

//Controller INIT procedure start.
MmioOr32 (MMCHS_CON, INIT);
MmioWrite32 (MMCHS_CMD, 0x00000000);
while (!(MmioRead32 (MMCHS_STAT) & CC));

//Wait for 1 ms
gBS->Stall(1000);

//Set CC bit to 0x1 to clear the flag
MmioOr32 (MMCHS_STAT, CC);

//Retry INIT procedure.
MmioWrite32 (MMCHS_CMD, 0x00000000);
while (!(MmioRead32 (MMCHS_STAT) & CC));

//End initialization sequence
MmioAnd32 (MMCHS_CON, ~INIT);

MmioOr32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_ON));

//Change clock frequency to 400KHz to fit protocol
UpdateMMCHSClkFrequency(CLKD_400KHZ);

MmioOr32 (MMCHS_CON, OD);

//Send CMD0 command.
Status = SendCmd (CMD0, CMD0_INT_EN, CmdArgument);
if (EFI_ERROR(Status)) {
DEBUG ((EFI_D_ERROR, "Cmd0 fails.\n"));
return Status;
}

DEBUG ((EFI_D_INFO, "CMD0 response: %x\n", MmioRead32 (MMCHS_RSP10)));

//Send CMD5 command.
Status = SendCmd (CMD5, CMD5_INT_EN, CmdArgument);
if (Status == EFI_SUCCESS) {
DEBUG ((EFI_D_ERROR, "CMD5 Success. SDIO card. Follow SDIO card specification.\n"));
DEBUG ((EFI_D_INFO, "CMD5 response: %x\n", MmioRead32 (MMCHS_RSP10)));
//NOTE: Returning unsupported error for now. Need to implement SDIO specification.
return EFI_UNSUPPORTED;
} else {
DEBUG ((EFI_D_INFO, "CMD5 fails. Not an SDIO card.\n"));
}

MmioOr32 (MMCHS_SYSCTL, SRC);
gBS->Stall(1000);
while ((MmioRead32 (MMCHS_SYSCTL) & SRC));

//Send CMD8 command. (New v2.00 command for Voltage check)
//Only 2.7V - 3.6V is supported for SD2.0, only SD 2.0 card can pass.
//MMC & SD1.1 card will fail this command.
CmdArgument = CMD8_ARG;
Status = SendCmd (CMD8, CMD8_INT_EN, CmdArgument);
if (Status == EFI_SUCCESS) {
Response = MmioRead32 (MMCHS_RSP10);
DEBUG ((EFI_D_INFO, "CMD8 success. CMD8 response: %x\n", Response));
if (Response != CmdArgument) {
 return EFI_DEVICE_ERROR;


}
DEBUG ((EFI_D_INFO, "Card is SD2.0\n"));
SDCmd8Supported = TRUE; //Supports high capacity.
} else {
DEBUG ((EFI_D_INFO, "CMD8 fails. Not an SD2.0 card.\n"));
}

MmioOr32 (MMCHS_SYSCTL, SRC);
gBS->Stall(1000);
while ((MmioRead32 (MMCHS_SYSCTL) & SRC));

//Poll till card is busy
while (RetryCount < MAX_RETRY_COUNT) {
//Send CMD55 command.
CmdArgument = 0;
Status = SendCmd (CMD55, CMD55_INT_EN, CmdArgument);
if (Status == EFI_SUCCESS) {
 DEBUG ((EFI_D_INFO, "CMD55 success. CMD55 response: %x\n", MmioRead32 (MMCHS_RSP10)));


 gCardInfo.CardType = SD_CARD;


} else {
 DEBUG ((EFI_D_INFO, "CMD55 fails.\n"));


 gCardInfo.CardType = MMC_CARD;


}

//Send appropriate command for the card type which got detected.
if (gCardInfo.CardType == SD_CARD) {
 CmdArgument = ((UINTN *) &(gCardInfo.OCRData))[0];



 //Set HCS bit.


 if (SDCmd8Supported) {


   CmdArgument |= HCS;


 }



 Status = SendCmd (ACMD41, ACMD41_INT_EN, CmdArgument);


 if (EFI_ERROR(Status)) {


   DEBUG ((EFI_D_INFO, "ACMD41 fails.\n"));


   return Status;


 }


 ((UINT32 *) &(gCardInfo.OCRData))[0] = MmioRead32 (MMCHS_RSP10);


 DEBUG ((EFI_D_INFO, "SD card detected. ACMD41 OCR: %x\n", ((UINT32 *) &(gCardInfo.OCRData))[0]));


} else if (gCardInfo.CardType == MMC_CARD) {
 CmdArgument = 0;


 Status = SendCmd (CMD1, CMD1_INT_EN, CmdArgument);


 if (EFI_ERROR(Status)) {


   DEBUG ((EFI_D_INFO, "CMD1 fails.\n"));


   return Status;


 }


 Response = MmioRead32 (MMCHS_RSP10);


 DEBUG ((EFI_D_INFO, "MMC card detected.. CMD1 response: %x\n", Response));



 //NOTE: For now, I am skipping this since I only have an SD card.


 //Compare card OCR and host OCR (Section 22.6.1.3.2.4)


 return EFI_UNSUPPORTED; //For now, MMC is not supported.


}

//Poll the card until it is out of its power-up sequence.
if (gCardInfo.OCRData.Busy == 1) {

 if (SDCmd8Supported) {


   gCardInfo.CardType = SD_CARD_2;


 }



 //Card is ready. Check CCS (Card capacity status) bit (bit#30).


 //SD 2.0 standard card will response with CCS 0, SD high capacity card will respond with CCS 1.


 if (gCardInfo.OCRData.AccessMode & BIT1) {


   gCardInfo.CardType = SD_CARD_2_HIGH;


   DEBUG ((EFI_D_INFO, "High capacity card.\n"));


 } else {


   DEBUG ((EFI_D_INFO, "Standard capacity card.\n"));


 }



 break;


}

gBS->Stall(1000);
RetryCount++;
}

if (RetryCount == MAX_RETRY_COUNT) {
DEBUG ((EFI_D_ERROR, "Timeout error. RetryCount: %d\n", RetryCount));
return EFI_TIMEOUT;
}

//Read CID data.
CmdArgument = 0;
Status = SendCmd (CMD2, CMD2_INT_EN, CmdArgument);
if (EFI_ERROR(Status)) {
DEBUG ((EFI_D_ERROR, "CMD2 fails. Status: %x\n", Status));
return Status;
}

DEBUG ((EFI_D_INFO, "CMD2 response: %x %x %x %x\n", MmioRead32 (MMCHS_RSP10), MmioRead32 (MMCHS_RSP32), MmioRead32 (MMCHS_RSP54), MmioRead32 (MMCHS_RSP76)));

//Parse CID register data.
ParseCardCIDData(MmioRead32 (MMCHS_RSP10), MmioRead32 (MMCHS_RSP32), MmioRead32 (MMCHS_RSP54), MmioRead32 (MMCHS_RSP76));

//Read RCA
CmdArgument = 0;
Status = SendCmd (CMD3, CMD3_INT_EN, CmdArgument);
if (EFI_ERROR(Status)) {
DEBUG ((EFI_D_ERROR, "CMD3 fails. Status: %x\n", Status));
return Status;
}

//Set RCA for the detected card. RCA is CMD3 response.
gCardInfo.RCA = (MmioRead32 (MMCHS_RSP10) >> 16);
DEBUG ((EFI_D_INFO, "CMD3 response: RCA %x\n", gCardInfo.RCA));

//MMC Bus setting change after card identification.
MmioAnd32 (MMCHS_CON, ~OD);
MmioOr32 (MMCHS_HCTL, SDVS_3_0_V);
UpdateMMCHSClkFrequency(CLKD_400KHZ); //Set the clock frequency to 400KHz.

return EFI_SUCCESS;

-}




-EFI_STATUS
-GetCardSpecificData (

VOID
)

-{

EFI_STATUS Status;
UINTN      CmdArgument;

//Send CMD9 to retrieve CSD.
CmdArgument = gCardInfo.RCA << 16;
Status = SendCmd (CMD9, CMD9_INT_EN, CmdArgument);
if (EFI_ERROR(Status)) {
DEBUG ((EFI_D_ERROR, "CMD9 fails. Status: %x\n", Status));
return Status;
}

//Populate 128-bit CSD register data.
((UINT32 *)&(gCardInfo.CSDData))[0] = MmioRead32 (MMCHS_RSP10);
((UINT32 *)&(gCardInfo.CSDData))[1] = MmioRead32 (MMCHS_RSP32);
((UINT32 *)&(gCardInfo.CSDData))[2] = MmioRead32 (MMCHS_RSP54);
((UINT32 *)&(gCardInfo.CSDData))[3] = MmioRead32 (MMCHS_RSP76);

DEBUG ((EFI_D_INFO, "CMD9 response: %x %x %x %x\n", MmioRead32 (MMCHS_RSP10), MmioRead32 (MMCHS_RSP32), MmioRead32 (MMCHS_RSP54), MmioRead32 (MMCHS_RSP76)));

//Calculate total number of blocks and max. data transfer rate supported by the detected card.
GetCardConfigurationData();

return Status;

-}




-EFI_STATUS
-PerformCardConfiguration (

VOID
)

-{

UINTN      CmdArgument = 0;
EFI_STATUS Status;

//Send CMD7
CmdArgument = gCardInfo.RCA << 16;
Status = SendCmd (CMD7, CMD7_INT_EN, CmdArgument);
if (EFI_ERROR(Status)) {
DEBUG ((EFI_D_ERROR, "CMD7 fails. Status: %x\n", Status));
return Status;
}

if ((gCardInfo.CardType != UNKNOWN_CARD) && (gCardInfo.CardType != MMC_CARD)) {
// We could read SCR register, but SD Card Phys spec stats any SD Card shall
// set SCR.SD_BUS_WIDTHS to support 4-bit mode, so why bother?

// Send ACMD6 (application specific commands must be prefixed with CMD55)
Status = SendCmd (CMD55, CMD55_INT_EN, CmdArgument);
if (!EFI_ERROR (Status)) {
 // set device into 4-bit data bus mode


 Status = SendCmd (ACMD6, ACMD6_INT_EN, 0x2);


 if (!EFI_ERROR (Status)) {


   // Set host controler into 4-bit mode


   MmioOr32 (MMCHS_HCTL, DTW_4_BIT);


   DEBUG ((EFI_D_INFO, "SD Memory Card set to 4-bit mode\n"));


 }


}
}

//Send CMD16 to set the block length
CmdArgument = gCardInfo.BlockSize;
Status = SendCmd (CMD16, CMD16_INT_EN, CmdArgument);
if (EFI_ERROR(Status)) {
DEBUG ((EFI_D_ERROR, "CMD16 fails. Status: %x\n", Status));
return Status;
}

//Change MMCHS clock frequency to what detected card can support.
UpdateMMCHSClkFrequency(gCardInfo.ClockFrequencySelect);

return EFI_SUCCESS;

-}




-EFI_STATUS
-ReadBlockData (

IN  EFI_BLOCK_IO_PROTOCOL       *This,
OUT VOID                        *Buffer
)

-{

UINTN MmcStatus;
UINTN *DataBuffer = Buffer;
UINTN DataSize = This->Media->BlockSize/4;
UINTN Count;
UINTN RetryCount = 0;

//Check controller status to make sure there is no error.
while (RetryCount < MAX_RETRY_COUNT) {
do {
 //Read Status.


 MmcStatus = MmioRead32 (MMCHS_STAT);


} while(MmcStatus == 0);

//Check if Buffer read ready (BRR) bit is set?
if (MmcStatus & BRR) {

 //Clear BRR bit


 MmioOr32 (MMCHS_STAT, BRR);



 //Read block worth of data.


 for (Count = 0; Count < DataSize; Count++) {


   *DataBuffer++ = MmioRead32 (MMCHS_DATA);


 }


 break;


}
RetryCount++;
}

if (RetryCount == MAX_RETRY_COUNT) {
return EFI_TIMEOUT;
}

return EFI_SUCCESS;

-}




-EFI_STATUS
-WriteBlockData (

IN  EFI_BLOCK_IO_PROTOCOL       *This,
OUT VOID                        *Buffer
)

-{

UINTN MmcStatus;
UINTN *DataBuffer = Buffer;
UINTN DataSize = This->Media->BlockSize/4;
UINTN Count;
UINTN RetryCount = 0;

//Check controller status to make sure there is no error.
while (RetryCount < MAX_RETRY_COUNT) {
do {
 //Read Status.


 MmcStatus = MmioRead32 (MMCHS_STAT);


} while(MmcStatus == 0);

//Check if Buffer write ready (BWR) bit is set?
if (MmcStatus & BWR) {

 //Clear BWR bit


 MmioOr32 (MMCHS_STAT, BWR);



 //Write block worth of data.


 for (Count = 0; Count < DataSize; Count++) {


   MmioWrite32 (MMCHS_DATA, *DataBuffer++);


 }



 break;


}
RetryCount++;
}

if (RetryCount == MAX_RETRY_COUNT) {
return EFI_TIMEOUT;
}

return EFI_SUCCESS;

-}



-EFI_STATUS
-DmaBlocks (

IN EFI_BLOCK_IO_PROTOCOL        *This,
IN  UINTN                       Lba,
IN OUT VOID                     *Buffer,
IN  UINTN                       BlockCount,
IN  OPERATION_TYPE              OperationType
)

-{

EFI_STATUS            Status;
UINTN                 DmaSize = 0;
UINTN                 Cmd = 0;
UINTN                 CmdInterruptEnable;
UINTN                 CmdArgument;
VOID                  *BufferMap;
EFI_PHYSICAL_ADDRESS  BufferAddress;
OMAP_DMA4             Dma4;
DMA_MAP_OPERATION     DmaOperation;
EFI_STATUS            MmcStatus;
UINTN                 RetryCount = 0;


-CpuDeadLoop ();

// Map passed in buffer for DMA xfer
DmaSize = BlockCount * This->Media->BlockSize;
Status = DmaMap (DmaOperation, Buffer, &DmaSize, &BufferAddress, &BufferMap);
if (EFI_ERROR (Status)) {
return Status;
}

ZeroMem (&DmaOperation, sizeof (DMA_MAP_OPERATION));


Dma4.DataType = 2;                      // DMA4_CSDPi[1:0]   32-bit elements from MMCHS_DATA

Dma4.SourceEndiansim = 0;               // DMA4_CSDPi[21]

Dma4.DestinationEndianism = 0;          // DMA4_CSDPi[19]

Dma4.SourcePacked = 0;                  // DMA4_CSDPi[6]

Dma4.DestinationPacked = 0;             // DMA4_CSDPi[13]

Dma4.NumberOfElementPerFrame = This->Media->BlockSize/4; // DMA4_CENi  (TRM 4K is optimum value)

Dma4.NumberOfFramePerTransferBlock = BlockCount;         // DMA4_CFNi

Dma4.ReadPriority = 0;                  // DMA4_CCRi[6]      Low priority read

Dma4.WritePriority = 0;                 // DMA4_CCRi[23]     Prefetech disabled


//Populate the command information based on the operation type.
if (OperationType == READ) {
Cmd = CMD18; //Multiple block read
CmdInterruptEnable = CMD18_INT_EN;
DmaOperation = MapOperationBusMasterCommonBuffer;

Dma4.ReadPortAccessType =0 ;            // DMA4_CSDPi[8:7]   Can not burst MMCHS_DATA reg

Dma4.WritePortAccessType = 3;           // DMA4_CSDPi[15:14] Memory burst 16x32

Dma4.WriteMode = 1;                     // DMA4_CSDPi[17:16] Write posted



Dma4.SourceStartAddress = MMCHS_DATA;                   // DMA4_CSSAi

Dma4.DestinationStartAddress = (UINT32)BufferAddress;   // DMA4_CDSAi

Dma4.SourceElementIndex = 1;                            // DMA4_CSEi

Dma4.SourceFrameIndex = 0x200;                          // DMA4_CSFi

Dma4.DestinationElementIndex = 1;                       // DMA4_CDEi

Dma4.DestinationFrameIndex = 0;                         // DMA4_CDFi



Dma4.ReadPortAccessMode = 0;            // DMA4_CCRi[13:12]  Always read MMCHS_DATA

Dma4.WritePortAccessMode = 1;           // DMA4_CCRi[15:14]  Post increment memory address

Dma4.ReadRequestNumber = 0x1e;          // DMA4_CCRi[4:0]    Syncro with MMCA_DMA_RX (61)

Dma4.WriteRequestNumber = 1;            // DMA4_CCRi[20:19]  Syncro upper 0x3e == 62 (one based)

} else if (OperationType == WRITE) {
Cmd = CMD25; //Multiple block write
CmdInterruptEnable = CMD25_INT_EN;
DmaOperation = MapOperationBusMasterRead;

Dma4.ReadPortAccessType = 3;            // DMA4_CSDPi[8:7]   Memory burst 16x32

Dma4.WritePortAccessType = 0;           // DMA4_CSDPi[15:14] Can not burst MMCHS_DATA reg

Dma4.WriteMode = 1;                     // DMA4_CSDPi[17:16] Write posted ???



Dma4.SourceStartAddress = (UINT32)BufferAddress;        // DMA4_CSSAi

Dma4.DestinationStartAddress = MMCHS_DATA;              // DMA4_CDSAi

Dma4.SourceElementIndex = 1;                            // DMA4_CSEi

Dma4.SourceFrameIndex = 0x200;                          // DMA4_CSFi

Dma4.DestinationElementIndex = 1;                       // DMA4_CDEi

Dma4.DestinationFrameIndex = 0;                         // DMA4_CDFi



Dma4.ReadPortAccessMode = 1;            // DMA4_CCRi[13:12]  Post increment memory address

Dma4.WritePortAccessMode = 0;           // DMA4_CCRi[15:14]  Always write MMCHS_DATA

Dma4.ReadRequestNumber = 0x1d;          // DMA4_CCRi[4:0]    Syncro with MMCA_DMA_TX (60)

Dma4.WriteRequestNumber = 1;            // DMA4_CCRi[20:19]  Syncro upper 0x3d == 61 (one based)

} else {
return EFI_INVALID_PARAMETER;
}


EnableDmaChannel (2, &Dma4);


//Set command argument based on the card access mode (Byte mode or Block mode)
if (gCardInfo.OCRData.AccessMode & BIT1) {
CmdArgument = Lba;
} else {
CmdArgument = Lba * This->Media->BlockSize;
}

//Send Command.
Status = SendCmd (Cmd, CmdInterruptEnable, CmdArgument);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "CMD fails. Status: %x\n", Status));
return Status;
}

//Check for the Transfer completion.
while (RetryCount < MAX_RETRY_COUNT) {
//Read Status
do {
 MmcStatus = MmioRead32 (MMCHS_STAT);


} while (MmcStatus == 0);

//Check if Transfer complete (TC) bit is set?
if (MmcStatus & TC) {
 break;


} else {
 DEBUG ((EFI_D_ERROR, "MmcStatus for TC: %x\n", MmcStatus));


 //Check if DEB, DCRC or DTO interrupt occured.


 if ((MmcStatus & DEB) | (MmcStatus & DCRC) | (MmcStatus & DTO)) {


   //There was an error during the data transfer.



   //Set SRD bit to 1 and wait until it return to 0x0.


   MmioOr32 (MMCHS_SYSCTL, SRD);


   while((MmioRead32 (MMCHS_SYSCTL) & SRD) != 0x0);



   DisableDmaChannel (2, DMA4_CSR_BLOCK, DMA4_CSR_ERR);


   DmaUnmap (BufferMap);


   return EFI_DEVICE_ERROR;


 }


}
RetryCount++;
}

DisableDmaChannel (2, DMA4_CSR_BLOCK, DMA4_CSR_ERR);
Status = DmaUnmap (BufferMap);

if (RetryCount == MAX_RETRY_COUNT) {
DEBUG ((EFI_D_ERROR, "TransferBlockData timed out.\n"));
return EFI_TIMEOUT;
}

return Status;

-}




-EFI_STATUS
-TransferBlock (

IN EFI_BLOCK_IO_PROTOCOL        *This,
IN  UINTN                       Lba,
IN OUT VOID                     *Buffer,
IN  OPERATION_TYPE              OperationType
)

-{

EFI_STATUS Status;
UINTN      MmcStatus;
UINTN      RetryCount = 0;
UINTN      Cmd = 0;
UINTN      CmdInterruptEnable = 0;
UINTN      CmdArgument = 0;


//Populate the command information based on the operation type.
if (OperationType == READ) {
Cmd = CMD17; //Single block read
CmdInterruptEnable = CMD18_INT_EN;
} else if (OperationType == WRITE) {
Cmd = CMD24; //Single block write
CmdInterruptEnable = CMD24_INT_EN;
}

//Set command argument based on the card access mode (Byte mode or Block mode)
if (gCardInfo.OCRData.AccessMode & BIT1) {
CmdArgument = Lba;
} else {
CmdArgument = Lba * This->Media->BlockSize;
}

//Send Command.
Status = SendCmd (Cmd, CmdInterruptEnable, CmdArgument);
if (EFI_ERROR(Status)) {
DEBUG ((EFI_D_ERROR, "CMD fails. Status: %x\n", Status));
return Status;
}

//Read or Write data.
if (OperationType == READ) {
Status = ReadBlockData (This, Buffer);
if (EFI_ERROR(Status)) {
 DEBUG((EFI_D_ERROR, "ReadBlockData fails.\n"));


 return Status;


}
} else if (OperationType == WRITE) {
Status = WriteBlockData (This, Buffer);
if (EFI_ERROR(Status)) {
 DEBUG((EFI_D_ERROR, "WriteBlockData fails.\n"));


 return Status;


}
}

//Check for the Transfer completion.
while (RetryCount < MAX_RETRY_COUNT) {
//Read Status
do {
 MmcStatus = MmioRead32 (MMCHS_STAT);


} while (MmcStatus == 0);

//Check if Transfer complete (TC) bit is set?
if (MmcStatus & TC) {
 break;


} else {
 DEBUG ((EFI_D_ERROR, "MmcStatus for TC: %x\n", MmcStatus));


 //Check if DEB, DCRC or DTO interrupt occured.


 if ((MmcStatus & DEB) | (MmcStatus & DCRC) | (MmcStatus & DTO)) {


   //There was an error during the data transfer.



   //Set SRD bit to 1 and wait until it return to 0x0.


   MmioOr32 (MMCHS_SYSCTL, SRD);


   while((MmioRead32 (MMCHS_SYSCTL) & SRD) != 0x0);



   return EFI_DEVICE_ERROR;


 }


}
RetryCount++;
}

if (RetryCount == MAX_RETRY_COUNT) {
DEBUG ((EFI_D_ERROR, "TransferBlockData timed out.\n"));
return EFI_TIMEOUT;
}

return EFI_SUCCESS;

-}



-BOOLEAN
-CardPresent (

VOID
)

-{

EFI_STATUS  Status;
UINT8       Data;

//
// Card detect is a GPIO0 on the TPS65950
//
Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, GPIODATAIN1), 1, &Data);
if (EFI_ERROR (Status)) {
return FALSE;
}

if ((Data & CARD_DETECT_BIT) == CARD_DETECT_BIT) {
// No Card present
return FALSE;
} else {
return TRUE;
}

-}



-EFI_STATUS
-DetectCard (

VOID
)

-{

EFI_STATUS    Status;

if (!CardPresent ()) {
return EFI_NO_MEDIA;
}

//Initialize MMC host controller clocks.
Status = InitializeMMCHS ();
if (EFI_ERROR(Status)) {
DEBUG ((EFI_D_ERROR, "Initialize MMC host controller fails. Status: %x\n", Status));
return Status;
}

//Software reset of the MMCHS host controller.
MmioWrite32 (MMCHS_SYSCONFIG, SOFTRESET);
gBS->Stall(1000);
while ((MmioRead32 (MMCHS_SYSSTATUS) & RESETDONE_MASK) != RESETDONE);

//Soft reset for all.
MmioWrite32 (MMCHS_SYSCTL, SRA);
gBS->Stall(1000);
while ((MmioRead32 (MMCHS_SYSCTL) & SRA) != 0x0);

//Voltage capabilities initialization. Activate VS18 and VS30.
MmioOr32 (MMCHS_CAPA, (VS30 | VS18));

//Wakeup configuration
MmioOr32 (MMCHS_SYSCONFIG, ENAWAKEUP);
MmioOr32 (MMCHS_HCTL, IWE);

//MMCHS Controller default initialization
MmioOr32 (MMCHS_CON, (OD | DW8_1_4_BIT | CEATA_OFF));

MmioWrite32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_OFF));

//Enable internal clock
MmioOr32 (MMCHS_SYSCTL, ICE);

//Set the clock frequency to 80KHz.
UpdateMMCHSClkFrequency (CLKD_80KHZ);

//Enable SD bus power.
MmioOr32 (MMCHS_HCTL, (SDBP_ON));

//Poll till SD bus power bit is set.
while ((MmioRead32 (MMCHS_HCTL) & SDBP_MASK) != SDBP_ON);

//Card idenfication
Status = PerformCardIdenfication ();
if (EFI_ERROR(Status)) {
DEBUG ((EFI_D_ERROR, "No MMC/SD card detected.\n"));
return Status;
}

//Get CSD (Card specific data) for the detected card.
Status = GetCardSpecificData();
if (EFI_ERROR(Status)) {
return Status;
}

//Configure the card in data transfer mode.
Status = PerformCardConfiguration();
if (EFI_ERROR(Status)) {
return Status;
}

//Patch the Media structure.
gMMCHSMedia.LastBlock    = (gCardInfo.NumBlocks - 1);
gMMCHSMedia.BlockSize    = gCardInfo.BlockSize;
gMMCHSMedia.ReadOnly     = (MmioRead32 (GPIO1_BASE + GPIO_DATAIN) & BIT23) == BIT23;
gMMCHSMedia.MediaPresent = TRUE;
gMMCHSMedia.MediaId++;

DEBUG ((EFI_D_INFO, "SD Card Media Change on Handle 0x%08x\n", gImageHandle));

return Status;

-}



-#define MAX_MMCHS_TRANSFER_SIZE  0x4000



-EFI_STATUS
-SdReadWrite (

IN EFI_BLOCK_IO_PROTOCOL    *This,
IN  UINTN                   Lba,
OUT VOID                    *Buffer,
IN  UINTN                   BufferSize,
IN  OPERATION_TYPE          OperationType
)

-{

EFI_STATUS Status = EFI_SUCCESS;
UINTN      RetryCount = 0;
UINTN      BlockCount;
UINTN      BytesToBeTranferedThisPass = 0;
UINTN      BytesRemainingToBeTransfered;
EFI_TPL    OldTpl;

BOOLEAN    Update;



Update               = FALSE;

if (gMediaChange) {
Update = TRUE;
Status = DetectCard  ();
if (EFI_ERROR (Status)) {
 // We detected a removal


 gMMCHSMedia.MediaPresent = FALSE;


 gMMCHSMedia.LastBlock    = 0;


 gMMCHSMedia.BlockSize    = 512;  // Should be zero but there is a bug in DiskIo


 gMMCHSMedia.ReadOnly     = FALSE;


}
gMediaChange             = FALSE;
} else if (!gMMCHSMedia.MediaPresent) {
Status = EFI_NO_MEDIA;
goto Done;
}

if (Update) {
DEBUG ((EFI_D_INFO, "SD Card ReinstallProtocolInterface ()\n"));
gBS->ReinstallProtocolInterface (
     gImageHandle,


     &gEfiBlockIoProtocolGuid,


     &gBlockIo,


     &gBlockIo


     );


return EFI_MEDIA_CHANGED;
}

if (EFI_ERROR (Status)) {
goto Done;
}

if (Buffer == NULL) {
Status = EFI_INVALID_PARAMETER;
goto Done;
}

if (Lba > This->Media->LastBlock) {
Status = EFI_INVALID_PARAMETER;
goto Done;
}

if ((BufferSize % This->Media->BlockSize) != 0) {
Status = EFI_BAD_BUFFER_SIZE;
goto Done;
}

//Check if the data lines are not in use.
while ((RetryCount++ < MAX_RETRY_COUNT) && ((MmioRead32 (MMCHS_PSTATE) & DATI_MASK) != DATI_ALLOWED));
if (RetryCount == MAX_RETRY_COUNT) {
Status = EFI_TIMEOUT;
goto Done;
}

OldTpl = gBS->RaiseTPL (TPL_NOTIFY);

BytesRemainingToBeTransfered = BufferSize;
while (BytesRemainingToBeTransfered > 0) {

if (gMediaChange) {
 Status = EFI_NO_MEDIA;


 DEBUG ((EFI_D_INFO, "SdReadWrite() EFI_NO_MEDIA due to gMediaChange\n"));


 goto DoneRestoreTPL;


}

// Turn OFF DMA path until it is debugged
// BytesToBeTranferedThisPass = (BytesToBeTranferedThisPass >= MAX_MMCHS_TRANSFER_SIZE) ? MAX_MMCHS_TRANSFER_SIZE : BytesRemainingToBeTransfered;
BytesToBeTranferedThisPass   = This->Media->BlockSize;

BlockCount = BytesToBeTranferedThisPass/This->Media->BlockSize;

if (BlockCount > 1) {
 Status = DmaBlocks (This, Lba, Buffer, BlockCount, OperationType);


} else {
 //Transfer a block worth of data.


 Status = TransferBlock (This, Lba, Buffer, OperationType);


}

if (EFI_ERROR(Status)) {
 DEBUG ((EFI_D_ERROR, "TransferBlockData fails. %x\n", Status));


 goto DoneRestoreTPL;


}

BytesRemainingToBeTransfered -= BytesToBeTranferedThisPass;
Lba    += BlockCount;
Buffer = (UINT8 *)Buffer + This->Media->BlockSize;
}


-DoneRestoreTPL:


gBS->RestoreTPL (OldTpl);


-Done:


return Status;


-}




-/**


Reset the Block Device.



@param  This                 Indicates a pointer to the calling context.

@param  ExtendedVerification Driver may perform diagnostics on reset.



@retval EFI_SUCCESS          The device was reset.

@retval EFI_DEVICE_ERROR     The device is not functioning properly and could

                          not be reset.






-**/
-EFI_STATUS
-EFIAPI
-MMCHSReset (

IN EFI_BLOCK_IO_PROTOCOL          *This,
IN BOOLEAN                        ExtendedVerification
)

-{

return EFI_SUCCESS;

-}




-/**


Read BufferSize bytes from Lba into Buffer.



@param  This       Indicates a pointer to the calling context.

@param  MediaId    Id of the media, changes every time the media is replaced.

@param  Lba        The starting Logical Block Address to read from

@param  BufferSize Size of Buffer, must be a multiple of device block size.

@param  Buffer     A pointer to the destination buffer for the data. The caller is

                responsible for either having implicit or explicit ownership of the buffer.





@retval EFI_SUCCESS           The data was read correctly from the device.

@retval EFI_DEVICE_ERROR      The device reported an error while performing the read.

@retval EFI_NO_MEDIA          There is no media in the device.

@retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.

@retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,

                           or the buffer is not on proper alignment.




-EFI_STATUS



-**/
-EFI_STATUS
-EFIAPI
-MMCHSReadBlocks (

IN EFI_BLOCK_IO_PROTOCOL          *This,
IN UINT32                         MediaId,
IN EFI_LBA                        Lba,
IN UINTN                          BufferSize,
OUT VOID                          *Buffer
)

-{

EFI_STATUS Status;

//Perform Read operation.
Status = SdReadWrite (This, (UINTN)Lba, Buffer, BufferSize, READ);

return Status;


-}




-/**


Write BufferSize bytes from Lba into Buffer.



@param  This       Indicates a pointer to the calling context.

@param  MediaId    The media ID that the write request is for.

@param  Lba        The starting logical block address to be written. The caller is

                responsible for writing to only legitimate locations.



@param  BufferSize Size of Buffer, must be a multiple of device block size.

@param  Buffer     A pointer to the source buffer for the data.



@retval EFI_SUCCESS           The data was written correctly to the device.

@retval EFI_WRITE_PROTECTED   The device can not be written to.

@retval EFI_DEVICE_ERROR      The device reported an error while performing the write.

@retval EFI_NO_MEDIA          There is no media in the device.

@retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.

@retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,

                           or the buffer is not on proper alignment.






-**/
-EFI_STATUS
-EFIAPI
-MMCHSWriteBlocks (

IN EFI_BLOCK_IO_PROTOCOL          *This,
IN UINT32                         MediaId,
IN EFI_LBA                        Lba,
IN UINTN                          BufferSize,
IN VOID                           *Buffer
)

-{

EFI_STATUS  Status;

//Perform write operation.
Status = SdReadWrite (This, (UINTN)Lba, Buffer, BufferSize, WRITE);


return Status;


-}




-/**


Flush the Block Device.



@param  This              Indicates a pointer to the calling context.



@retval EFI_SUCCESS       All outstanding data was written to the device

@retval EFI_DEVICE_ERROR  The device reported an error while writting back the data

@retval EFI_NO_MEDIA      There is no media in the device.




-**/
-EFI_STATUS
-EFIAPI
-MMCHSFlushBlocks (

IN EFI_BLOCK_IO_PROTOCOL  *This
)

-{

return EFI_SUCCESS;

-}




-EFI_BLOCK_IO_PROTOCOL gBlockIo = {

EFI_BLOCK_IO_INTERFACE_REVISION,   // Revision
&gMMCHSMedia,                      // *Media
MMCHSReset,                        // Reset
MMCHSReadBlocks,                   // ReadBlocks
MMCHSWriteBlocks,                  // WriteBlocks
MMCHSFlushBlocks                   // FlushBlocks

-};




-/**


Timer callback to convert card present hardware into a boolean that indicates

a media change event has happened. If you just check the GPIO you could see

card 1 and then check again after card 1 was removed and card 2 was inserted

and you would still see media present. Thus you need the timer tick to catch

the toggle event.



@param  Event                 Event whose notification function is being invoked.

@param  Context               The pointer to the notification function's context,

                           which is implementation-dependent. Not used.






-**/
-VOID
-EFIAPI
-TimerCallback (

IN  EFI_EVENT   Event,
IN  VOID        *Context
)

-{

BOOLEAN Present;

Present = CardPresent ();
if (gMMCHSMedia.MediaPresent) {
if (!Present && !gMediaChange) {
 gMediaChange = TRUE;


}
} else {
if (Present && !gMediaChange) {
 gMediaChange = TRUE;


}
}

-}




-EFI_STATUS
-EFIAPI
-MMCHSInitialize (

IN EFI_HANDLE         ImageHandle,
IN EFI_SYSTEM_TABLE   *SystemTable
)

-{

EFI_STATUS  Status;

Status = gBS->LocateProtocol (&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950);
ASSERT_EFI_ERROR(Status);

ZeroMem (&gCardInfo, sizeof (CARD_INFO));

Status = gBS->CreateEvent (EVT_TIMER | EVT_NOTIFY_SIGNAL, TPL_CALLBACK, TimerCallback, NULL, &gTimerEvent);
ASSERT_EFI_ERROR (Status);

Status = gBS->SetTimer (gTimerEvent, TimerPeriodic, FixedPcdGet32 (PcdMmchsTimerFreq100NanoSeconds));
ASSERT_EFI_ERROR (Status);

//Publish BlockIO.
Status = gBS->InstallMultipleProtocolInterfaces (
             &ImageHandle,


             &gEfiBlockIoProtocolGuid,    &gBlockIo,


             &gEfiDevicePathProtocolGuid, &gMmcHsDevicePath,


             NULL


             );


return Status;

-}
diff --git a/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.h b/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.h
deleted file mode 100644
index 06960a3bd6ce..000000000000
--- a/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef _MMCHS_H_
-#define _MMCHS_H_



-#include <Uefi.h>



-#include <Library/BaseLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/DebugLib.h>
-#include <Library/IoLib.h>
-#include <Library/PcdLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/OmapLib.h>
-#include <Library/OmapDmaLib.h>
-#include <Library/DmaLib.h>



-#include <Protocol/EmbeddedExternalDevice.h>
-#include <Protocol/BlockIo.h>
-#include <Protocol/DevicePath.h>



-#include <Omap3530/Omap3530.h>
-#include <TPS65950.h>



-#define MAX_RETRY_COUNT  (100*5)



-#define HCS               BIT30 //Host capacity support/1 = Supporting high capacity
-#define CCS               BIT30 //Card capacity status/1 = High capacity card
-typedef struct {

UINT32  Reserved0:   7; // 0
UINT32  V170_V195:   1; // 1.70V - 1.95V
UINT32  V200_V260:   7; // 2.00V - 2.60V
UINT32  V270_V360:   9; // 2.70V - 3.60V
UINT32  RESERVED_1:  5; // Reserved
UINT32  AccessMode:  2; // 00b (byte mode), 10b (sector mode)
UINT32  Busy:        1; // This bit is set to LOW if the card has not finished the power up routine

-}OCR;



-typedef struct {

UINT32  NOT_USED;   // 1 [0:0]
UINT32  CRC;        // CRC7 checksum [7:1]
UINT32  MDT;        // Manufacturing date [19:8]
UINT32  RESERVED_1; // Reserved [23:20]
UINT32  PSN;        // Product serial number [55:24]
UINT8   PRV;        // Product revision [63:56]
UINT8   PNM[5];     // Product name [64:103]
UINT16  OID;        // OEM/Application ID [119:104]
UINT8   MID;        // Manufacturer ID [127:120]

-}CID;



-typedef struct {

UINT8   NOT_USED:           1; // Not used, always 1 [0:0]
UINT8   CRC:                7; // CRC [7:1]

UINT8   RESERVED_1:         2; // Reserved [9:8]
UINT8   FILE_FORMAT:        2; // File format [11:10]
UINT8   TMP_WRITE_PROTECT:  1; // Temporary write protection [12:12]
UINT8   PERM_WRITE_PROTECT: 1; // Permanent write protection [13:13]
UINT8   COPY:               1; // Copy flag (OTP) [14:14]
UINT8   FILE_FORMAT_GRP:    1; // File format group [15:15]

UINT16  RESERVED_2:         5; // Reserved [20:16]
UINT16  WRITE_BL_PARTIAL:   1; // Partial blocks for write allowed [21:21]
UINT16  WRITE_BL_LEN:       4; // Max. write data block length [25:22]
UINT16  R2W_FACTOR:         3; // Write speed factor [28:26]
UINT16  RESERVED_3:         2; // Reserved [30:29]
UINT16  WP_GRP_ENABLE:      1; // Write protect group enable [31:31]

UINT32  WP_GRP_SIZE:        7; // Write protect group size [38:32]
UINT32  SECTOR_SIZE:        7; // Erase sector size [45:39]
UINT32  ERASE_BLK_EN:       1; // Erase single block enable [46:46]
UINT32  C_SIZE_MULT:        3; // Device size multiplier [49:47]
UINT32  VDD_W_CURR_MAX:     3; // Max. write current @ VDD max [52:50]
UINT32  VDD_W_CURR_MIN:     3; // Max. write current @ VDD min [55:53]
UINT32  VDD_R_CURR_MAX:     3; // Max. read current @ VDD max [58:56]
UINT32  VDD_R_CURR_MIN:     3; // Max. read current @ VDD min [61:59]
UINT32  C_SIZELow2:         2; // Device size [63:62]

UINT32  C_SIZEHigh10:       10;// Device size [73:64]
UINT32  RESERVED_4:         2; // Reserved [75:74]
UINT32  DSR_IMP:            1; // DSR implemented [76:76]
UINT32  READ_BLK_MISALIGN:  1; // Read block misalignment [77:77]
UINT32  WRITE_BLK_MISALIGN: 1; // Write block misalignment [78:78]
UINT32  READ_BL_PARTIAL:    1; // Partial blocks for read allowed [79:79]
UINT32  READ_BL_LEN:        4; // Max. read data block length [83:80]
UINT32  CCC:                12;// Card command classes [95:84]

UINT8   TRAN_SPEED          ;  // Max. bus clock frequency [103:96]
UINT8   NSAC                ;  // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
UINT8   TAAC                ;  // Data read access-time 1 [119:112]

UINT8   RESERVED_5:         6; // Reserved [125:120]
UINT8   CSD_STRUCTURE:      2; // CSD structure [127:126]

-}CSD;



-typedef struct {

UINT8   NOT_USED:           1; // Not used, always 1 [0:0]
UINT8   CRC:                7; // CRC [7:1]
UINT8   RESERVED_1:         2; // Reserved [9:8]
UINT8   FILE_FORMAT:        2; // File format [11:10]
UINT8   TMP_WRITE_PROTECT:  1; // Temporary write protection [12:12]
UINT8   PERM_WRITE_PROTECT: 1; // Permanent write protection [13:13]
UINT8   COPY:               1; // Copy flag (OTP) [14:14]
UINT8   FILE_FORMAT_GRP:    1; // File format group [15:15]
UINT16  RESERVED_2:         5; // Reserved [20:16]
UINT16  WRITE_BL_PARTIAL:   1; // Partial blocks for write allowed [21:21]
UINT16  WRITE_BL_LEN:       4; // Max. write data block length [25:22]
UINT16  R2W_FACTOR:         3; // Write speed factor [28:26]
UINT16  RESERVED_3:         2; // Reserved [30:29]
UINT16  WP_GRP_ENABLE:      1; // Write protect group enable [31:31]
UINT16  WP_GRP_SIZE:        7; // Write protect group size [38:32]
UINT16  SECTOR_SIZE:        7; // Erase sector size [45:39]
UINT16  ERASE_BLK_EN:       1; // Erase single block enable [46:46]
UINT16  RESERVED_4:         1; // Reserved [47:47]
UINT32  C_SIZELow16:        16;// Device size [69:48]
UINT32  C_SIZEHigh6:        6; // Device size [69:48]
UINT32  RESERVED_5:         6; // Reserved [75:70]
UINT32  DSR_IMP:            1; // DSR implemented [76:76]
UINT32  READ_BLK_MISALIGN:  1; // Read block misalignment [77:77]
UINT32  WRITE_BLK_MISALIGN: 1; // Write block misalignment [78:78]
UINT32  READ_BL_PARTIAL:    1; // Partial blocks for read allowed [79:79]
UINT16  READ_BL_LEN:        4; // Max. read data block length [83:80]
UINT16  CCC:                12;// Card command classes [95:84]
UINT8   TRAN_SPEED          ;  // Max. bus clock frequency [103:96]
UINT8   NSAC                ;  // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
UINT8   TAAC                ;  // Data read access-time 1 [119:112]
UINT8   RESERVED_6:         6; // 0 [125:120]
UINT8   CSD_STRUCTURE:      2; // CSD structure [127:126]

-}CSD_SDV2;



-typedef enum {

UNKNOWN_CARD,
MMC_CARD,              //MMC card
SD_CARD,               //SD 1.1 card
SD_CARD_2,             //SD 2.0 or above standard card
SD_CARD_2_HIGH         //SD 2.0 or above high capacity card

-} CARD_TYPE;



-typedef enum {

READ,
WRITE

-} OPERATION_TYPE;



-typedef struct  {

UINT16    RCA;
UINTN     BlockSize;
UINTN     NumBlocks;
UINTN     ClockFrequencySelect;
CARD_TYPE CardType;
OCR       OCRData;
CID       CIDData;
CSD       CSDData;

-} CARD_INFO;



-EFI_STATUS
-DetectCard (

VOID
);


-extern EFI_BLOCK_IO_PROTOCOL gBlockIo;



-#endif
diff --git a/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.inf b/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.inf
deleted file mode 100644
index e40abdc73c4d..000000000000
--- a/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.inf
+++ /dev/null
@@ -1,54 +0,0 @@
-#/** @file
-#
-#  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = MMCHS
FILE_GUID                      = 100c2cfa-b586-4198-9b4c-1683d195b1da
MODULE_TYPE                    = DXE_DRIVER
VERSION_STRING                 = 1.0

ENTRY_POINT                    = MMCHSInitialize



-[Sources.common]

MMCHS.c


-[Packages]

MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[LibraryClasses]

PcdLib
UefiLib
UefiDriverEntryPoint
MemoryAllocationLib
IoLib
OmapDmaLib
DmaLib


-[Guids]



-[Protocols]

gEfiBlockIoProtocolGuid
gEfiCpuArchProtocolGuid
gEfiDevicePathProtocolGuid
gEmbeddedExternalDeviceProtocolGuid


-[Pcd]

gOmap35xxTokenSpaceGuid.PcdOmap35xxMMCHS1Base
gOmap35xxTokenSpaceGuid.PcdMmchsTimerFreq100NanoSeconds


-[depex]

gEmbeddedExternalDeviceProtocolGuid

diff --git a/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.c b/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.c
deleted file mode 100755
index ad922a18e348..000000000000
--- a/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.c
+++ /dev/null
@@ -1,677 +0,0 @@
-/** @file
-*
-*  Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.
-*  Copyright (c) 2011 - 2014, ARM Limited. All rights reserved.
-*
-*  This program and the accompanying materials
-*  are licensed and made available under the terms and conditions of the BSD License
-*  which accompanies this distribution.  The full text of the license may be found at
-*  http://opensource.org/licenses/bsd-license.php
-*
-*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-*
-**/



-#include "MmcHostDxe.h"



-EMBEDDED_EXTERNAL_DEVICE   *gTPS65950;
-UINT8                      mMaxDataTransferRate = 0;
-UINT32                     mRca = 0;
-BOOLEAN                    mBitModeSet = FALSE;




-typedef struct {

VENDOR_DEVICE_PATH  Mmc;
EFI_DEVICE_PATH     End;

-} MMCHS_DEVICE_PATH;



-MMCHS_DEVICE_PATH gMMCDevicePath = {

{
{
 HARDWARE_DEVICE_PATH,


 HW_VENDOR_DP,


 { (UINT8)(sizeof(VENDOR_DEVICE_PATH)), (UINT8)((sizeof(VENDOR_DEVICE_PATH)) >> 8) },


},
{ 0xb615f1f5, 0x5088, 0x43cd, { 0x80, 0x9c, 0xa1, 0x6e, 0x52, 0x48, 0x7d, 0x00 } }
},
{
END_DEVICE_PATH_TYPE,
END_ENTIRE_DEVICE_PATH_SUBTYPE,
{ sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 }
}

-};



-BOOLEAN
-IgnoreCommand (

UINT32 Command
)

-{

switch(Command) {
case MMC_CMD12:
 return TRUE;


case MMC_CMD13:
 return TRUE;


default:
 return FALSE;


}

-}



-UINT32
-TranslateCommand (

UINT32 Command
)

-{

UINT32 Translation;

switch(Command) {
case MMC_CMD2:
 Translation = CMD2;


 break;


case MMC_CMD3:
 Translation = CMD3;


 break;


/*case MMC_CMD6:
 Translation = CMD6;


 break;*/


case MMC_CMD7:
 Translation = CMD7;


 break;


case MMC_CMD8:
 Translation = CMD8;


 break;


case MMC_CMD9:
 Translation = CMD9;


 break;


/*case MMC_CMD12:
 Translation = CMD12;


 break;


case MMC_CMD13:
 Translation = CMD13;


 break;*/


case MMC_CMD16:
 Translation = CMD16;


 break;


case MMC_CMD17:
 Translation = 0x113A0014;//CMD17;


 break;


case MMC_CMD24:
 Translation = CMD24 | 4;


 break;


case MMC_CMD55:
 Translation = CMD55;


 break;


case MMC_ACMD41:
 Translation = ACMD41;


 break;


default:
 Translation = Command;


}

return Translation;

-}



-VOID
-CalculateCardCLKD (

UINTN *ClockFrequencySelect
)

-{

UINTN    TransferRateValue = 0;
UINTN    TimeValue = 0 ;
UINTN    Frequency = 0;

DEBUG ((DEBUG_BLKIO, "CalculateCardCLKD()\n"));

// For SD Cards  we would need to send CMD6 to set
// speeds abouve 25MHz. High Speed mode 50 MHz and up

// Calculate Transfer rate unit (Bits 2:0 of TRAN_SPEED)
switch (mMaxDataTransferRate & 0x7) { // 2
case 0:
 TransferRateValue = 100 * 1000;


 break;



case 1:
 TransferRateValue = 1 * 1000 * 1000;


 break;



case 2:
 TransferRateValue = 10 * 1000 * 1000;


 break;



case 3:
 TransferRateValue = 100 * 1000 * 1000;


 break;



default:
 DEBUG ((DEBUG_BLKIO, "Invalid parameter.\n"));


 ASSERT(FALSE);


 return;


}

//Calculate Time value (Bits 6:3 of TRAN_SPEED)
switch ((mMaxDataTransferRate >> 3) & 0xF) { // 6
case 1:
 TimeValue = 10;


 break;



case 2:
 TimeValue = 12;


 break;



case 3:
 TimeValue = 13;


 break;



case 4:
 TimeValue = 15;


 break;



case 5:
 TimeValue = 20;


 break;



case 6:
 TimeValue = 25;


 break;



case 7:
 TimeValue = 30;


 break;



case 8:
 TimeValue = 35;


 break;



case 9:
 TimeValue = 40;


 break;



case 10:
 TimeValue = 45;


 break;



case 11:
 TimeValue = 50;


 break;



case 12:
 TimeValue = 55;


 break;



case 13:
 TimeValue = 60;


 break;



case 14:
 TimeValue = 70;


 break;



case 15:
 TimeValue = 80;


 break;



default:
 DEBUG ((DEBUG_BLKIO, "Invalid parameter.\n"));


 ASSERT(FALSE);


 return;


}

Frequency = TransferRateValue * TimeValue/10;

// Calculate Clock divider value to program in MMCHS_SYSCTL[CLKD] field.
*ClockFrequencySelect = ((MMC_REFERENCE_CLK/Frequency) + 1);

DEBUG ((DEBUG_BLKIO, "mMaxDataTransferRate: 0x%x, Frequency: %d KHz, ClockFrequencySelect: %x\n", mMaxDataTransferRate, Frequency/1000, *ClockFrequencySelect));

-}



-VOID
-UpdateMMCHSClkFrequency (

UINTN NewCLKD
)

-{

DEBUG ((DEBUG_BLKIO, "UpdateMMCHSClkFrequency()\n"));

// Set Clock enable to 0x0 to not provide the clock to the card
MmioAnd32 (MMCHS_SYSCTL, ~CEN);

// Set new clock frequency.
MmioAndThenOr32 (MMCHS_SYSCTL, ~CLKD_MASK, NewCLKD << 6);

// Poll till Internal Clock Stable
while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS);

// Set Clock enable to 0x1 to provide the clock to the card
MmioOr32 (MMCHS_SYSCTL, CEN);

-}



-EFI_STATUS
-InitializeMMCHS (

VOID
)

-{

UINT8      Data;
EFI_STATUS Status;

DEBUG ((DEBUG_BLKIO, "InitializeMMCHS()\n"));

// Select Device group to belong to P1 device group in Power IC.
Data = DEV_GRP_P1;
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VMMC1_DEV_GRP), 1, &Data);
ASSERT_EFI_ERROR(Status);

// Configure voltage regulator for MMC1 in Power IC to output 3.0 voltage.
Data = VSEL_3_00V;
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VMMC1_DEDICATED_REG), 1, &Data);
ASSERT_EFI_ERROR(Status);

// After ramping up voltage, set VDDS stable bit to indicate that voltage level is stable.
MmioOr32 (CONTROL_PBIAS_LITE, (PBIASLITEVMODE0 | PBIASLITEPWRDNZ0 | PBIASSPEEDCTRL0 | PBIASLITEVMODE1 | PBIASLITEWRDNZ1));

// Enable WP GPIO
MmioAndThenOr32 (GPIO1_BASE + GPIO_OE, ~BIT23, BIT23);

// Enable Card Detect
Data = CARD_DETECT_ENABLE;
gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, TPS65950_GPIO_CTRL), 1, &Data);

return Status;

-}



-BOOLEAN
-MMCIsCardPresent (

IN EFI_MMC_HOST_PROTOCOL     *This
)

-{

EFI_STATUS  Status;
UINT8       Data;

//
// Card detect is a GPIO0 on the TPS65950
//
Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, GPIODATAIN1), 1, &Data);
if (EFI_ERROR (Status)) {
return FALSE;
}

return !(Data & CARD_DETECT_BIT);

-}



-BOOLEAN
-MMCIsReadOnly (

IN EFI_MMC_HOST_PROTOCOL     *This
)

-{

/* Note:

On our BeagleBoard the SD card WP pin is always read as TRUE.



Probably something wrong with GPIO configuration.



BeagleBoard-xM uses microSD cards so there is no write protect at all.



Hence commenting out SD card WP pin read status.


*/
//return (MmioRead32 (GPIO1_BASE + GPIO_DATAIN) & BIT23) == BIT23;
return 0;


-}



-// TODO
-EFI_GUID mPL180MciDevicePathGuid = EFI_CALLER_ID_GUID;



-EFI_STATUS
-MMCBuildDevicePath (

IN EFI_MMC_HOST_PROTOCOL     *This,
IN EFI_DEVICE_PATH_PROTOCOL  **DevicePath
)

-{

EFI_DEVICE_PATH_PROTOCOL    *NewDevicePathNode;

NewDevicePathNode = CreateDeviceNode(HARDWARE_DEVICE_PATH,HW_VENDOR_DP,sizeof(VENDOR_DEVICE_PATH));
CopyGuid(&((VENDOR_DEVICE_PATH*)NewDevicePathNode)->Guid,&mPL180MciDevicePathGuid);
*DevicePath = NewDevicePathNode;
return EFI_SUCCESS;

-}



-EFI_STATUS
-MMCSendCommand (

IN EFI_MMC_HOST_PROTOCOL     *This,
IN MMC_CMD                   MmcCmd,
IN UINT32                    Argument
)

-{

UINTN MmcStatus;
UINTN RetryCount = 0;

if (IgnoreCommand(MmcCmd))
return EFI_SUCCESS;

MmcCmd = TranslateCommand(MmcCmd);

//DEBUG ((EFI_D_ERROR, "MMCSendCommand(%d)\n", MmcCmd));

// Check if command line is in use or not. Poll till command line is available.
while ((MmioRead32 (MMCHS_PSTATE) & DATI_MASK) == DATI_NOT_ALLOWED);

// Provide the block size.
MmioWrite32 (MMCHS_BLK, BLEN_512BYTES);

// Setting Data timeout counter value to max value.
MmioAndThenOr32 (MMCHS_SYSCTL, ~DTO_MASK, DTO_VAL);

// Clear Status register.
MmioWrite32 (MMCHS_STAT, 0xFFFFFFFF);

// Set command argument register
MmioWrite32 (MMCHS_ARG, Argument);

//TODO: fix this
//Enable interrupt enable events to occur
//MmioWrite32 (MMCHS_IE, CmdInterruptEnableVal);

// Send a command
MmioWrite32 (MMCHS_CMD, MmcCmd);

// Check for the command status.
while (RetryCount < MAX_RETRY_COUNT) {
do {
 MmcStatus = MmioRead32 (MMCHS_STAT);


} while (MmcStatus == 0);

// Read status of command response
if ((MmcStatus & ERRI) != 0) {

 // Perform soft-reset for mmci_cmd line.


 MmioOr32 (MMCHS_SYSCTL, SRC);


 while ((MmioRead32 (MMCHS_SYSCTL) & SRC));



 //DEBUG ((EFI_D_INFO, "MmcStatus: 0x%x\n", MmcStatus));


 return EFI_DEVICE_ERROR;


}

// Check if command is completed.
if ((MmcStatus & CC) == CC) {
 MmioWrite32 (MMCHS_STAT, CC);


 break;


}

RetryCount++;
}

if (RetryCount == MAX_RETRY_COUNT) {
DEBUG ((DEBUG_BLKIO, "MMCSendCommand: Timeout\n"));
return EFI_TIMEOUT;
}

return EFI_SUCCESS;

-}



-EFI_STATUS
-MMCNotifyState (

IN EFI_MMC_HOST_PROTOCOL    *This,
IN MMC_STATE                State
)

-{

EFI_STATUS              Status;
UINTN                   FreqSel;

switch(State) {
case MmcInvalidState:
 ASSERT(0);


 break;


case MmcHwInitializationState:
 mBitModeSet = FALSE;



 DEBUG ((DEBUG_BLKIO, "MMCHwInitializationState()\n"));


 Status = InitializeMMCHS ();


 if (EFI_ERROR(Status)) {


   DEBUG ((DEBUG_BLKIO, "Initialize MMC host controller fails. Status: %x\n", Status));


   return Status;


 }



 // Software reset of the MMCHS host controller.


 MmioWrite32 (MMCHS_SYSCONFIG, SOFTRESET);


 gBS->Stall(1000);


 while ((MmioRead32 (MMCHS_SYSSTATUS) & RESETDONE_MASK) != RESETDONE);



 // Soft reset for all.


 MmioWrite32 (MMCHS_SYSCTL, SRA);


 gBS->Stall(1000);


 while ((MmioRead32 (MMCHS_SYSCTL) & SRA) != 0x0);



 //Voltage capabilities initialization. Activate VS18 and VS30.


 MmioOr32 (MMCHS_CAPA, (VS30 | VS18));



 // Wakeup configuration


 MmioOr32 (MMCHS_SYSCONFIG, ENAWAKEUP);


 MmioOr32 (MMCHS_HCTL, IWE);



 // MMCHS Controller default initialization


 MmioOr32 (MMCHS_CON, (OD | DW8_1_4_BIT | CEATA_OFF));



 MmioWrite32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_OFF));



 // Enable internal clock


 MmioOr32 (MMCHS_SYSCTL, ICE);



 // Set the clock frequency to 80KHz.


 UpdateMMCHSClkFrequency (CLKD_80KHZ);



 // Enable SD bus power.


 MmioOr32 (MMCHS_HCTL, (SDBP_ON));



 // Poll till SD bus power bit is set.


 while ((MmioRead32 (MMCHS_HCTL) & SDBP_MASK) != SDBP_ON);



 // Enable interrupts.


 MmioWrite32 (MMCHS_IE, (BADA_EN | CERR_EN | DEB_EN | DCRC_EN | DTO_EN | CIE_EN |


   CEB_EN | CCRC_EN | CTO_EN | BRR_EN | BWR_EN | TC_EN | CC_EN));



 // Controller INIT procedure start.


 MmioOr32 (MMCHS_CON, INIT);


 MmioWrite32 (MMCHS_CMD, 0x00000000);


 while (!(MmioRead32 (MMCHS_STAT) & CC));



 // Wait for 1 ms


 gBS->Stall (1000);



 // Set CC bit to 0x1 to clear the flag


 MmioOr32 (MMCHS_STAT, CC);



 // Retry INIT procedure.


 MmioWrite32 (MMCHS_CMD, 0x00000000);


 while (!(MmioRead32 (MMCHS_STAT) & CC));



 // End initialization sequence


 MmioAnd32 (MMCHS_CON, ~INIT);



 MmioOr32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_ON));



 // Change clock frequency to 400KHz to fit protocol


 UpdateMMCHSClkFrequency(CLKD_400KHZ);



 MmioOr32 (MMCHS_CON, OD);


 break;


case MmcIdleState:
 break;


case MmcReadyState:
 break;


case MmcIdentificationState:
 break;


case MmcStandByState:
 CalculateCardCLKD (&FreqSel);


 UpdateMMCHSClkFrequency (FreqSel);


 break;


case MmcTransferState:
 if (!mBitModeSet) {


   Status = MMCSendCommand (This, CMD55, mRca << 16);


   if (!EFI_ERROR (Status)) {


     // Set device into 4-bit data bus mode


     Status = MMCSendCommand (This, ACMD6, 0x2);


     if (!EFI_ERROR (Status)) {


       // Set host controler into 4-bit mode


       MmioOr32 (MMCHS_HCTL, DTW_4_BIT);


       DEBUG ((DEBUG_BLKIO, "SD Memory Card set to 4-bit mode\n"));


       mBitModeSet = TRUE;


     }


   }


 }


 break;


case MmcSendingDataState:
 break;


case MmcReceiveDataState:
 break;


case MmcProgrammingState:
 break;


case MmcDisconnectState:
default:
 ASSERT(0);


}
return EFI_SUCCESS;

-}



-EFI_STATUS
-MMCReceiveResponse (

IN EFI_MMC_HOST_PROTOCOL     *This,
IN MMC_RESPONSE_TYPE         Type,
IN UINT32*                   Buffer
)

-{

if (Buffer == NULL) {
return EFI_INVALID_PARAMETER;
}

if (Type == MMC_RESPONSE_TYPE_R2) {
Buffer[0] = MmioRead32 (MMCHS_RSP10);
Buffer[1] = MmioRead32 (MMCHS_RSP32);
Buffer[2] = MmioRead32 (MMCHS_RSP54);
Buffer[3] = MmioRead32 (MMCHS_RSP76);
} else {
Buffer[0] = MmioRead32 (MMCHS_RSP10);
}

if (Type == MMC_RESPONSE_TYPE_CSD) {
mMaxDataTransferRate = Buffer[3] & 0xFF;
} else if (Type == MMC_RESPONSE_TYPE_RCA) {
mRca = Buffer[0] >> 16;
}

return EFI_SUCCESS;

-}



-EFI_STATUS
-MMCReadBlockData (

IN EFI_MMC_HOST_PROTOCOL      *This,
IN EFI_LBA                    Lba,
IN UINTN                      Length,
IN UINT32*                    Buffer
)

-{

UINTN MmcStatus;
UINTN Count;
UINTN RetryCount = 0;

DEBUG ((DEBUG_BLKIO, "MMCReadBlockData(LBA: 0x%x, Length: 0x%x, Buffer: 0x%x)\n", Lba, Length, Buffer));

// Check controller status to make sure there is no error.
while (RetryCount < MAX_RETRY_COUNT) {
do {
 // Read Status.


 MmcStatus = MmioRead32 (MMCHS_STAT);


} while(MmcStatus == 0);

// Check if Buffer read ready (BRR) bit is set?
if (MmcStatus & BRR) {

 // Clear BRR bit


 MmioOr32 (MMCHS_STAT, BRR);



 for (Count = 0; Count < Length / 4; Count++) {


   *Buffer++ = MmioRead32(MMCHS_DATA);


 }


 break;


}
RetryCount++;
}

if (RetryCount == MAX_RETRY_COUNT) {
return EFI_TIMEOUT;
}

return EFI_SUCCESS;

-}



-EFI_STATUS
-MMCWriteBlockData (

IN EFI_MMC_HOST_PROTOCOL    *This,
IN EFI_LBA                  Lba,
IN UINTN                    Length,
IN UINT32*                  Buffer
)

-{

UINTN MmcStatus;
UINTN Count;
UINTN RetryCount = 0;

// Check controller status to make sure there is no error.
while (RetryCount < MAX_RETRY_COUNT) {
do {
 // Read Status.


 MmcStatus = MmioRead32 (MMCHS_STAT);


} while(MmcStatus == 0);

// Check if Buffer write ready (BWR) bit is set?
if (MmcStatus & BWR) {

 // Clear BWR bit


 MmioOr32 (MMCHS_STAT, BWR);



 // Write block worth of data.


 for (Count = 0; Count < Length / 4; Count++) {


   MmioWrite32 (MMCHS_DATA, *Buffer++);


 }



 break;


}
RetryCount++;
}

if (RetryCount == MAX_RETRY_COUNT) {
return EFI_TIMEOUT;
}

return EFI_SUCCESS;

-}



-EFI_MMC_HOST_PROTOCOL gMMCHost = {

MMC_HOST_PROTOCOL_REVISION,
MMCIsCardPresent,
MMCIsReadOnly,
MMCBuildDevicePath,
MMCNotifyState,
MMCSendCommand,
MMCReceiveResponse,
MMCReadBlockData,
MMCWriteBlockData

-};



-EFI_STATUS
-MMCInitialize (

IN EFI_HANDLE         ImageHandle,
IN EFI_SYSTEM_TABLE   *SystemTable
)

-{

EFI_STATUS    Status;
EFI_HANDLE    Handle = NULL;

DEBUG ((DEBUG_BLKIO, "MMCInitialize()\n"));

Status = gBS->LocateProtocol (&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950);
ASSERT_EFI_ERROR(Status);

Status = gBS->InstallMultipleProtocolInterfaces (
             &Handle,


             &gEfiMmcHostProtocolGuid,         &gMMCHost,


             NULL


             );


ASSERT_EFI_ERROR (Status);

return Status;

-}
diff --git a/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.h b/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.h
deleted file mode 100755
index 0748ddfa473f..000000000000
--- a/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/** @file
-*
-*  Copyright (c) 2011, ARM Limited. All rights reserved.
-*
-*  This program and the accompanying materials
-*  are licensed and made available under the terms and conditions of the BSD License
-*  which accompanies this distribution.  The full text of the license may be found at
-*  http://opensource.org/licenses/bsd-license.php
-*
-*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-*
-**/



-#ifndef _MMC_HOST_DXE_H_
-#define _MMC_HOST_DXE_H_



-#include <Uefi.h>



-#include <Library/BaseLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/DebugLib.h>
-#include <Library/DevicePathLib.h>
-#include <Library/IoLib.h>
-#include <Library/PcdLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/OmapLib.h>
-#include <Library/OmapDmaLib.h>
-#include <Library/DmaLib.h>



-#include <Protocol/EmbeddedExternalDevice.h>
-#include <Protocol/BlockIo.h>
-#include <Protocol/DevicePath.h>
-#include <Protocol/MmcHost.h>



-#include <Omap3530/Omap3530.h>
-#include <TPS65950.h>



-#define MAX_RETRY_COUNT  (100*5)



-extern EFI_BLOCK_IO_PROTOCOL gBlockIo;



-#endif
diff --git a/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.inf b/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.inf
deleted file mode 100755
index f6cca8c88050..000000000000
--- a/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.inf
+++ /dev/null
@@ -1,53 +0,0 @@
-#  Copyright (c) 2011, ARM Limited. All rights reserved.
-#
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = MMC
FILE_GUID                      = 100c2cfa-b586-4198-9b4c-1683d195b1da
MODULE_TYPE                    = DXE_DRIVER
VERSION_STRING                 = 1.0

ENTRY_POINT                    = MMCInitialize



-[Sources.common]

MmcHostDxe.c


-[Packages]

MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[LibraryClasses]

PcdLib
UefiLib
UefiDriverEntryPoint
MemoryAllocationLib
IoLib
OmapDmaLib
DmaLib


-[Guids]



-[Protocols]

gEfiBlockIoProtocolGuid
gEfiCpuArchProtocolGuid
gEfiDevicePathProtocolGuid
gEmbeddedExternalDeviceProtocolGuid
gEfiMmcHostProtocolGuid


-[Pcd]

gOmap35xxTokenSpaceGuid.PcdOmap35xxMMCHS1Base
gOmap35xxTokenSpaceGuid.PcdMmchsTimerFreq100NanoSeconds


-[depex]

gEmbeddedExternalDeviceProtocolGuid

diff --git a/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec b/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec
deleted file mode 100644
index 8924e2ac4757..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec
+++ /dev/null
@@ -1,58 +0,0 @@
-#/** @file
-# Omap35xx SoC package.
-#
-# Copyright (c) 2009 - 2010, Apple Inc. All rights reserved.<BR>
-#
-#    This program and the accompanying materials are licensed and made available under
-#    the terms and conditions of the BSD License which accompanies this distribution.
-#    The full text of the license may be found at
-#    http://opensource.org/licenses/bsd-license.php
-#
-#    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

DEC_SPECIFICATION              = 0x00010005
PACKAGE_NAME                   = Omap35xxPkg
PACKAGE_GUID                   = D196A631-B7B7-4953-A3EE-0F773CBABF20
PACKAGE_VERSION                = 0.1


-################################################################################
-#
-# Include Section - list of Include Paths that are provided by this package.
-#                   Comments are used for Keywords and Module Types.
-#
-# Supported Module Types:
-#  BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION
-#
-################################################################################
-[Includes.common]

Include                        # Root include for the package


-[LibraryClasses]

##  @libraryclass  Abstract location of basic OMAP components
##
OmapLib|Include/Library/OmapLib.h

##  @libraryclass  Abstract OMAP and ARM DMA, modeled after PCI IO protocol
##
OmapDmaLib|Include/Library/OmapDmaLib.h



-[Guids.common]

gOmap35xxTokenSpaceGuid    =  { 0x24b09abe, 0x4e47, 0x481c, { 0xa9, 0xad, 0xce, 0xf1, 0x2c, 0x39, 0x23, 0x27} }


-[PcdsFeatureFlag.common]



-[PcdsFixedAtBuild.common]

gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart|3|UINT32|0x00000202
gOmap35xxTokenSpaceGuid.PcdOmap35xxGpmcOffset|0x00000000|UINT32|0x00000203
gOmap35xxTokenSpaceGuid.PcdOmap35xxMMCHS1Base|0x00000000|UINT32|0x00000204
gOmap35xxTokenSpaceGuid.PcdOmap35xxArchTimer|3|UINT32|0x00000205
gOmap35xxTokenSpaceGuid.PcdOmap35xxFreeTimer|4|UINT32|0x00000206
gOmap35xxTokenSpaceGuid.PcdOmap35xxDebugAgentTimer|5|UINT32|0x00000207
gOmap35xxTokenSpaceGuid.PcdDebugAgentTimerFreqNanoSeconds|77|UINT32|0x00000208
gOmap35xxTokenSpaceGuid.PcdMmchsTimerFreq100NanoSeconds|1000000|UINT32|0x00000209


diff --git a/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dsc b/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dsc
deleted file mode 100644
index 9056bba831c5..000000000000
--- a/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dsc
+++ /dev/null
@@ -1,188 +0,0 @@
-#/** @file
-# Omap35xx SoC package.
-#
-# Copyright (c) 2009 - 2010, Apple Inc. All rights reserved.<BR>
-#
-#    This program and the accompanying materials
-#    are licensed and made available under the terms and conditions of the BSD License
-#    which accompanies this distribution. The full text of the license may be found at
-#    http://opensource.org/licenses/bsd-license.php
-#
-#    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-################################################################################
-#
-# Defines Section - statements that will be processed to create a Makefile.
-#
-################################################################################
-[Defines]

PLATFORM_NAME                  = Omap35xxPkg
PLATFORM_GUID                  = D196A631-B7B7-4953-A3EE-0F773CBABF20
PLATFORM_VERSION               = 0.1
DSC_SPECIFICATION              = 0x00010005
OUTPUT_DIRECTORY               = Build/Omap35xxPkg
SUPPORTED_ARCHITECTURES        = ARM
BUILD_TARGETS                  = DEBUG|RELEASE
SKUID_IDENTIFIER               = DEFAULT
DEFINE TARGET_HACK             = DEBUG



-[LibraryClasses.common]

DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf

ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf

BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf

PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf

CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
DefaultExceptioHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLib.inf
PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf

RealTimeClockLib|EmbeddedPkg/Library/TemplateRealTimeClockLib/TemplateRealTimeClockLib.inf

IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
OmapLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf
OmapDmaLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf

MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
UefiLib|MdePkg/Library/UefiLib/UefiLib.inf
UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf
DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf

DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf
UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf
UefiApplicationEntryPoint|MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf
DmaLib|ArmPkg/Library/ArmDmaLib/ArmDmaLib.inf


-#
-# Assume everything is fixed at build
-#

PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf

UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf

# UncachedMemoryAllocationLib|ArmPkg/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf
UncachedMemoryAllocationLib|ArmPkg/Library/DebugUncachedMemoryAllocationLib/DebugUncachedMemoryAllocationLib.inf

CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf



-[LibraryClasses.common.DXE_DRIVER]

DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf



-[LibraryClasses.ARM]

#
# Note: This NULL library feature is not yet in the edk2/BaseTools, but it is checked in to
# the BaseTools project. So you need to build with the BaseTools project util this feature gets synced.
#
NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf



-[BuildOptions]

XCODE:*_*_ARM_ARCHCC_FLAGS     == -arch armv7 -march=armv7
XCODE:*_*_ARM_ARCHASM_FLAGS    == -arch armv7
XCODE:*_*_ARM_ARCHDLINK_FLAGS  == -arch armv7

GCC:*_*_ARM_ARCHCC_FLAGS     == -march=armv7-a -mthumb
GCC:*_*_ARM_ARCHASM_FLAGS    == -march=armv7-a

RVCT:*_*_ARM_ARCHCC_FLAGS     == --cpu 7-A
RVCT:*_*_ARM_ARCHASM_FLAGS    == --cpu 7-A



-################################################################################
-#
-# Pcd Section - list of all EDK II PCD Entries defined by this Platform
-#
-################################################################################




-[PcdsFixedAtBuild.common]



-# DEBUG_ASSERT_ENABLED       0x01
-# DEBUG_PRINT_ENABLED        0x02
-# DEBUG_CODE_ENABLED         0x04
-# CLEAR_MEMORY_ENABLED       0x08
-# ASSERT_BREAKPOINT_ENABLED  0x10
-# ASSERT_DEADLOOP_ENABLED    0x20

gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f


-#  DEBUG_INIT      0x00000001  // Initialization
-#  DEBUG_WARN      0x00000002  // Warnings
-#  DEBUG_LOAD      0x00000004  // Load events
-#  DEBUG_FS        0x00000008  // EFI File system
-#  DEBUG_POOL      0x00000010  // Alloc & Free's
-#  DEBUG_PAGE      0x00000020  // Alloc & Free's
-#  DEBUG_INFO      0x00000040  // Verbose
-#  DEBUG_DISPATCH  0x00000080  // PEI/DXE Dispatchers
-#  DEBUG_VARIABLE  0x00000100  // Variable
-#  DEBUG_BM        0x00000400  // Boot Manager
-#  DEBUG_BLKIO     0x00001000  // BlkIo Driver
-#  DEBUG_NET       0x00004000  // SNI Driver
-#  DEBUG_UNDI      0x00010000  // UNDI Driver
-#  DEBUG_LOADFILE  0x00020000  // UNDI Driver
-#  DEBUG_EVENT     0x00080000  // Event messages
-#  DEBUG_ERROR     0x80000000  // Error

gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000004

gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07

gEmbeddedTokenSpaceGuid.PcdPrePiTempMemorySize|0
gEmbeddedTokenSpaceGuid.PcdPrePiBfvBaseAddress|0
gEmbeddedTokenSpaceGuid.PcdPrePiBfvSize|0
gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase|0
gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize|0
gEmbeddedTokenSpaceGuid.PcdPrePiHobBase|0x80001000
gEmbeddedTokenSpaceGuid.PcdPrePiStackBase|0x87FE0000 # stack at top of memory
gEmbeddedTokenSpaceGuid.PcdPrePiStackSize|0x20000  # 128K stack
gArmTokenSpaceGuid.PcdCpuVectorBaseAddress|0x80000000
gArmTokenSpaceGuid.PcdCpuResetAddress|0x80008000

gOmap35xxTokenSpaceGuid.PcdOmap35xxGpmcOffset|0x6E000000
gOmap35xxTokenSpaceGuid.PcdOmap35xxMMCHS1Base|0x4809C000

# Console
gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart|3

# Timers
gOmap35xxTokenSpaceGuid.PcdOmap35xxArchTimer|3
gOmap35xxTokenSpaceGuid.PcdOmap35xxFreeTimer|4
gEmbeddedTokenSpaceGuid.PcdTimerPeriod|100000
gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterPeriodInNanoseconds|77
gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterFrequencyInHz|13000000

#
# ARM Pcds
#
gArmTokenSpaceGuid.PcdArmUncachedMemoryMask|0x0000000040000000


-################################################################################
-#
-# Components Section - list of all EDK II Modules needed by this Platform
-#
-################################################################################
-[Components.common]

OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/Omap35xxTimerLib.inf
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf

OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Flash/Flash.inf
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/MMCHSDxe/MMCHS.inf
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf




diff --git a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.c b/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.c
deleted file mode 100644
index 17ea03ccf486..000000000000
--- a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.c
+++ /dev/null
@@ -1,633 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include "PciEmulation.h"



-EMBEDDED_EXTERNAL_DEVICE   *gTPS65950;



-#define HOST_CONTROLLER_OPERATION_REG_SIZE  0x44



-typedef struct {

ACPI_HID_DEVICE_PATH      AcpiDevicePath;
PCI_DEVICE_PATH           PciDevicePath;
EFI_DEVICE_PATH_PROTOCOL  EndDevicePath;

-} EFI_PCI_IO_DEVICE_PATH;



-typedef struct {

UINT32                  Signature;
EFI_PCI_IO_DEVICE_PATH  DevicePath;
EFI_PCI_IO_PROTOCOL     PciIoProtocol;
PCI_TYPE00              *ConfigSpace;
PCI_ROOT_BRIDGE         RootBridge;
UINTN                   Segment;

-} EFI_PCI_IO_PRIVATE_DATA;



-#define EFI_PCI_IO_PRIVATE_DATA_SIGNATURE     SIGNATURE_32('p', 'c', 'i', 'o')
-#define EFI_PCI_IO_PRIVATE_DATA_FROM_THIS(a)  CR(a, EFI_PCI_IO_PRIVATE_DATA, PciIoProtocol, EFI_PCI_IO_PRIVATE_DATA_SIGNATURE)



-EFI_PCI_IO_DEVICE_PATH PciIoDevicePathTemplate =
-{

{
{ ACPI_DEVICE_PATH, ACPI_DP, { sizeof (ACPI_HID_DEVICE_PATH), 0 } },
EISA_PNP_ID(0x0A03),  // HID
0                     // UID
},
{
{ HARDWARE_DEVICE_PATH, HW_PCI_DP, { sizeof (PCI_DEVICE_PATH), 0 } },
0,
0
},
{ END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0} }

-};



-STATIC
-VOID
-ConfigureUSBHost (

VOID
)

-{

EFI_STATUS Status;
UINT8      Data = 0;

// Take USB host out of force-standby mode
MmioWrite32 (UHH_SYSCONFIG, UHH_SYSCONFIG_MIDLEMODE_NO_STANDBY
                       | UHH_SYSCONFIG_CLOCKACTIVITY_ON


                       | UHH_SYSCONFIG_SIDLEMODE_NO_STANDBY


                       | UHH_SYSCONFIG_ENAWAKEUP_ENABLE


                       | UHH_SYSCONFIG_AUTOIDLE_ALWAYS_RUN);


MmioWrite32 (UHH_HOSTCONFIG, UHH_HOSTCONFIG_P3_CONNECT_STATUS_DISCONNECT
                        | UHH_HOSTCONFIG_P2_CONNECT_STATUS_DISCONNECT


                        | UHH_HOSTCONFIG_P1_CONNECT_STATUS_DISCONNECT


                        | UHH_HOSTCONFIG_ENA_INCR_ALIGN_DISABLE


                        | UHH_HOSTCONFIG_ENA_INCR16_ENABLE


                        | UHH_HOSTCONFIG_ENA_INCR8_ENABLE


                        | UHH_HOSTCONFIG_ENA_INCR4_ENABLE


                        | UHH_HOSTCONFIG_AUTOPPD_ON_OVERCUR_EN_ON


                        | UHH_HOSTCONFIG_P1_ULPI_BYPASS_ULPI_MODE);



// USB reset (GPIO 147 - Port 5 pin 19) output high
MmioAnd32 (GPIO5_BASE + GPIO_OE, ~BIT19);
MmioWrite32 (GPIO5_BASE + GPIO_SETDATAOUT, BIT19);

// Get the Power IC protocol
Status = gBS->LocateProtocol (&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950);
ASSERT_EFI_ERROR (Status);

// Power the USB PHY
Data = VAUX_DEV_GRP_P1;
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VAUX2_DEV_GRP), 1, &Data);
ASSERT_EFI_ERROR(Status);

Data = VAUX_DEDICATED_18V;
Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VAUX2_DEDICATED), 1, &Data);
ASSERT_EFI_ERROR (Status);

// Enable power to the USB hub
Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID3, LEDEN), 1, &Data);
ASSERT_EFI_ERROR (Status);

// LEDAON controls the power to the USB host, PWM is disabled
Data &= ~LEDAPWM;
Data |= LEDAON;

Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID3, LEDEN), 1, &Data);
ASSERT_EFI_ERROR (Status);

-}




-EFI_STATUS
-PciIoPollMem (

IN EFI_PCI_IO_PROTOCOL           *This,
IN  EFI_PCI_IO_PROTOCOL_WIDTH    Width,
IN  UINT8                        BarIndex,
IN  UINT64                       Offset,
IN  UINT64                       Mask,
IN  UINT64                       Value,
IN  UINT64                       Delay,
OUT UINT64                       *Result
)

-{

ASSERT (FALSE);
return EFI_UNSUPPORTED;

-}



-EFI_STATUS
-PciIoPollIo (

IN EFI_PCI_IO_PROTOCOL           *This,
IN  EFI_PCI_IO_PROTOCOL_WIDTH    Width,
IN  UINT8                        BarIndex,
IN  UINT64                       Offset,
IN  UINT64                       Mask,
IN  UINT64                       Value,
IN  UINT64                       Delay,
OUT UINT64                       *Result
)

-{

ASSERT (FALSE);
return EFI_UNSUPPORTED;

-}



-EFI_STATUS
-PciIoMemRead (

IN EFI_PCI_IO_PROTOCOL              *This,
IN     EFI_PCI_IO_PROTOCOL_WIDTH    Width,
IN     UINT8                        BarIndex,
IN     UINT64                       Offset,
IN     UINTN                        Count,
IN OUT VOID                         *Buffer
)

-{

EFI_PCI_IO_PRIVATE_DATA *Private = EFI_PCI_IO_PRIVATE_DATA_FROM_THIS(This);

return PciRootBridgeIoMemRead (&Private->RootBridge.Io,
                           (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,


                           Private->ConfigSpace->Device.Bar[BarIndex] + Offset,


                           Count,


                           Buffer


                           );



-}



-EFI_STATUS
-PciIoMemWrite (

IN EFI_PCI_IO_PROTOCOL              *This,
IN     EFI_PCI_IO_PROTOCOL_WIDTH    Width,
IN     UINT8                        BarIndex,
IN     UINT64                       Offset,
IN     UINTN                        Count,
IN OUT VOID                         *Buffer
)

-{

EFI_PCI_IO_PRIVATE_DATA *Private = EFI_PCI_IO_PRIVATE_DATA_FROM_THIS(This);

return PciRootBridgeIoMemWrite (&Private->RootBridge.Io,
                            (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,


                            Private->ConfigSpace->Device.Bar[BarIndex] + Offset,


                            Count,


                            Buffer


                            );



-}



-EFI_STATUS
-PciIoIoRead (

IN EFI_PCI_IO_PROTOCOL              *This,
IN     EFI_PCI_IO_PROTOCOL_WIDTH    Width,
IN     UINT8                        BarIndex,
IN     UINT64                       Offset,
IN     UINTN                        Count,
IN OUT VOID                         *Buffer
)

-{

ASSERT (FALSE);
return EFI_UNSUPPORTED;

-}



-EFI_STATUS
-PciIoIoWrite (

IN EFI_PCI_IO_PROTOCOL              *This,
IN     EFI_PCI_IO_PROTOCOL_WIDTH    Width,
IN     UINT8                        BarIndex,
IN     UINT64                       Offset,
IN     UINTN                        Count,
IN OUT VOID                         *Buffer
)

-{

ASSERT (FALSE);
return EFI_UNSUPPORTED;

-}



-/**

Enable a PCI driver to read PCI controller registers in PCI configuration space.

@param[in]      This    A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param[in]      Width   Signifies the width of the memory operations.
@param[in]      Offset  The offset within the PCI configuration space for
                     the PCI controller.


@param[in]      Count   The number of PCI configuration operations to
                     perform. Bytes moved is Width size * Count,


                     starting at Offset.



@param[in out]  Buffer  The destination buffer to store the results.

@retval  EFI_SUCCESS            The data was read from the PCI controller.
@retval  EFI_INVALID_PARAMETER  "Width" is invalid.
@retval  EFI_INVALID_PARAMETER  "Buffer" is NULL.


-**/
-EFI_STATUS
-PciIoPciRead (

IN     EFI_PCI_IO_PROTOCOL       *This,
IN     EFI_PCI_IO_PROTOCOL_WIDTH  Width,
IN     UINT32                     Offset,
IN     UINTN                      Count,
IN OUT VOID                      *Buffer
)

-{

EFI_PCI_IO_PRIVATE_DATA *Private = EFI_PCI_IO_PRIVATE_DATA_FROM_THIS (This);
EFI_STATUS Status;

if ((Width < 0) || (Width >= EfiPciIoWidthMaximum) || (Buffer == NULL)) {
return EFI_INVALID_PARAMETER;
}

Status = PciRootBridgeIoMemRW (
        (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH)Width,


        Count,


        TRUE,


        (PTR)(UINTN)Buffer,


        TRUE,


        (PTR)(UINTN)(((UINT8 *)Private->ConfigSpace) + Offset)  //Fix me ConfigSpace


        );



return Status;

-}



-/**

Enable a PCI driver to write PCI controller registers in PCI configuration space.

@param[in]      This    A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param[in]      Width   Signifies the width of the memory operations.
@param[in]      Offset  The offset within the PCI configuration space for
                     the PCI controller.


@param[in]      Count   The number of PCI configuration operations to
                     perform. Bytes moved is Width size * Count,


                     starting at Offset.



@param[in out]  Buffer  The source buffer to write data from.

@retval  EFI_SUCCESS            The data was read from the PCI controller.
@retval  EFI_INVALID_PARAMETER  "Width" is invalid.
@retval  EFI_INVALID_PARAMETER  "Buffer" is NULL.


-**/
-EFI_STATUS
-PciIoPciWrite (

IN EFI_PCI_IO_PROTOCOL              *This,
IN     EFI_PCI_IO_PROTOCOL_WIDTH    Width,
IN     UINT32                       Offset,
IN     UINTN                        Count,
IN OUT VOID                         *Buffer
)

-{

EFI_PCI_IO_PRIVATE_DATA *Private = EFI_PCI_IO_PRIVATE_DATA_FROM_THIS (This);

if ((Width < 0) || (Width >= EfiPciIoWidthMaximum) || (Buffer == NULL)) {
return EFI_INVALID_PARAMETER;
}

return PciRootBridgeIoMemRW ((EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width,
                          Count,


                          TRUE,


                          (PTR)(UINTN)(((UINT8 *)Private->ConfigSpace) + Offset),


                          TRUE,


                          (PTR)(UINTN)Buffer


                          );



-}



-EFI_STATUS
-PciIoCopyMem (

IN EFI_PCI_IO_PROTOCOL              *This,
IN     EFI_PCI_IO_PROTOCOL_WIDTH    Width,
IN     UINT8                        DestBarIndex,
IN     UINT64                       DestOffset,
IN     UINT8                        SrcBarIndex,
IN     UINT64                       SrcOffset,
IN     UINTN                        Count
)

-{

ASSERT (FALSE);
return EFI_UNSUPPORTED;

-}



-EFI_STATUS
-PciIoMap (

IN EFI_PCI_IO_PROTOCOL                *This,
IN     EFI_PCI_IO_PROTOCOL_OPERATION  Operation,
IN     VOID                           *HostAddress,
IN OUT UINTN                          *NumberOfBytes,
OUT    EFI_PHYSICAL_ADDRESS           *DeviceAddress,
OUT    VOID                           **Mapping
)

-{

DMA_MAP_OPERATION   DmaOperation;

if (Operation == EfiPciIoOperationBusMasterRead) {
DmaOperation = MapOperationBusMasterRead;
} else if (Operation == EfiPciIoOperationBusMasterWrite) {
DmaOperation = MapOperationBusMasterWrite;
} else if (Operation == EfiPciIoOperationBusMasterCommonBuffer) {
DmaOperation = MapOperationBusMasterCommonBuffer;
} else {
return EFI_INVALID_PARAMETER;
}
return DmaMap (DmaOperation, HostAddress, NumberOfBytes, DeviceAddress, Mapping);

-}



-EFI_STATUS
-PciIoUnmap (

IN EFI_PCI_IO_PROTOCOL           *This,
IN  VOID                         *Mapping
)

-{

return DmaUnmap (Mapping);

-}



-/**

Allocate pages that are suitable for an EfiPciIoOperationBusMasterCommonBuffer
mapping.

@param[in]   This         A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param[in]   Type         This parameter is not used and must be ignored.
@param[in]   MemoryType   The type of memory to allocate, EfiBootServicesData or
                       EfiRuntimeServicesData.


@param[in]   Pages        The number of pages to allocate.
@param[out]  HostAddress  A pointer to store the base system memory address of
                       the allocated range.


@param[in]   Attributes   The requested bit mask of attributes for the allocated
                       range. Only the attributes,


                       EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE and


                       EFI_PCI_ATTRIBUTE_MEMORY_CACHED may be used with this


                       function. If any other bits are set, then EFI_UNSUPPORTED


                       is returned. This function ignores this bit mask.



@retval  EFI_SUCCESS            The requested memory pages were allocated.
@retval  EFI_INVALID_PARAMETER  HostAddress is NULL.
@retval  EFI_INVALID_PARAMETER  MemoryType is invalid.
@retval  EFI_UNSUPPORTED        Attributes is unsupported.
@retval  EFI_OUT_OF_RESOURCES   The memory pages could not be allocated.


-**/
-EFI_STATUS
-PciIoAllocateBuffer (

IN EFI_PCI_IO_PROTOCOL  *This,
IN  EFI_ALLOCATE_TYPE   Type,
IN  EFI_MEMORY_TYPE     MemoryType,
IN  UINTN               Pages,
OUT VOID                **HostAddress,
IN  UINT64              Attributes
)

-{

if (Attributes &
 (~(EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE |


    EFI_PCI_ATTRIBUTE_MEMORY_CACHED         ))) {


return EFI_UNSUPPORTED;
}

return DmaAllocateBuffer (MemoryType, Pages, HostAddress);

-}




-EFI_STATUS
-PciIoFreeBuffer (

IN EFI_PCI_IO_PROTOCOL           *This,
IN  UINTN                        Pages,
IN  VOID                         *HostAddress
)

-{

return DmaFreeBuffer (Pages, HostAddress);

-}




-EFI_STATUS
-PciIoFlush (

IN EFI_PCI_IO_PROTOCOL  *This
)

-{

return EFI_SUCCESS;

-}



-/**

Retrieves this PCI controller's current PCI bus number, device number, and function number.

@param[in]   This            A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param[out]  SegmentNumber   The PCI controller's current PCI segment number.
@param[out]  BusNumber       The PCI controller's current PCI bus number.
@param[out]  DeviceNumber    The PCI controller's current PCI device number.
@param[out]  FunctionNumber  The PCI controller’s current PCI function number.

@retval  EFI_SUCCESS            The PCI controller location was returned.
@retval  EFI_INVALID_PARAMETER  At least one out of the four output parameters is
                             a NULL pointer.



-**/
-EFI_STATUS
-PciIoGetLocation (

IN   EFI_PCI_IO_PROTOCOL  *This,
OUT  UINTN                *SegmentNumber,
OUT  UINTN                *BusNumber,
OUT  UINTN                *DeviceNumber,
OUT  UINTN                *FunctionNumber
)

-{

EFI_PCI_IO_PRIVATE_DATA *Private = EFI_PCI_IO_PRIVATE_DATA_FROM_THIS (This);

if ((SegmentNumber == NULL) || (BusNumber      == NULL) ||
 (DeviceNumber  == NULL) || (FunctionNumber == NULL)    ) {


return EFI_INVALID_PARAMETER;
}

*SegmentNumber  = Private->Segment;
*BusNumber      = 0xff;
*DeviceNumber   = 0;
*FunctionNumber = 0;

return EFI_SUCCESS;

-}



-/**

Performs an operation on the attributes that this PCI controller supports.

The operations include getting the set of supported attributes, retrieving
the current attributes, setting the current attributes, enabling attributes,
and disabling attributes.

@param[in]   This        A pointer to the EFI_PCI_IO_PROTOCOL instance.
@param[in]   Operation   The operation to perform on the attributes for this
                      PCI controller.


@param[in]   Attributes  The mask of attributes that are used for Set,
                      Enable and Disable operations.


@param[out]  Result      A pointer to the result mask of attributes that are
                      returned for the Get and Supported operations. This


                      is an optional parameter that may be NULL for the


                      Set, Enable, and Disable operations.



@retval  EFI_SUCCESS            The operation on the PCI controller's
                             attributes was completed. If the operation


                             was Get or Supported, then the attribute mask


                             is returned in Result.


@retval  EFI_INVALID_PARAMETER  Operation is greater than or equal to
                             EfiPciIoAttributeOperationMaximum.


@retval  EFI_INVALID_PARAMETER  Operation is Get and Result is NULL.
@retval  EFI_INVALID_PARAMETER  Operation is Supported and Result is NULL.


-**/
-EFI_STATUS
-PciIoAttributes (

IN EFI_PCI_IO_PROTOCOL                       *This,
IN  EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION  Operation,
IN  UINT64                                   Attributes,
OUT UINT64                                   *Result OPTIONAL
)

-{

switch (Operation) {
case EfiPciIoAttributeOperationGet:
case EfiPciIoAttributeOperationSupported:
if (Result == NULL) {
 return EFI_INVALID_PARAMETER;


}
//
// We are not a real PCI device so just say things we kind of do
//
*Result = EFI_PCI_DEVICE_ENABLE;
break;

case EfiPciIoAttributeOperationSet:
case EfiPciIoAttributeOperationEnable:
case EfiPciIoAttributeOperationDisable:
if (Attributes & (~EFI_PCI_DEVICE_ENABLE)) {
 return EFI_UNSUPPORTED;


}
// Since we are not a real PCI device no enable/set or disable operations exist.
return EFI_SUCCESS;

default:
return EFI_INVALID_PARAMETER;
};
return EFI_SUCCESS;

-}



-EFI_STATUS
-PciIoGetBarAttributes (

IN EFI_PCI_IO_PROTOCOL             *This,
IN  UINT8                          BarIndex,
OUT UINT64                         *Supports, OPTIONAL
OUT VOID                           **Resources OPTIONAL
)

-{

ASSERT (FALSE);
return EFI_UNSUPPORTED;

-}



-EFI_STATUS
-PciIoSetBarAttributes (

IN EFI_PCI_IO_PROTOCOL              *This,
IN     UINT64                       Attributes,
IN     UINT8                        BarIndex,
IN OUT UINT64                       *Offset,
IN OUT UINT64                       *Length
)

-{

ASSERT (FALSE);
return EFI_UNSUPPORTED;

-}



-EFI_PCI_IO_PROTOCOL PciIoTemplate =
-{

PciIoPollMem,
PciIoPollIo,
{ PciIoMemRead, PciIoMemWrite },
{ PciIoIoRead,  PciIoIoWrite },
{ PciIoPciRead, PciIoPciWrite },
PciIoCopyMem,
PciIoMap,
PciIoUnmap,
PciIoAllocateBuffer,
PciIoFreeBuffer,
PciIoFlush,
PciIoGetLocation,
PciIoAttributes,
PciIoGetBarAttributes,
PciIoSetBarAttributes,
0,
0

-};



-EFI_STATUS
-EFIAPI
-PciEmulationEntryPoint (

IN EFI_HANDLE       ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)

-{

EFI_STATUS              Status;
EFI_HANDLE              Handle;
EFI_PCI_IO_PRIVATE_DATA *Private;
UINT8                   CapabilityLength;
UINT8                   PhysicalPorts;
UINTN                   Count;


//Configure USB host for OMAP3530.
ConfigureUSBHost();

// Create a private structure
Private = AllocatePool(sizeof(EFI_PCI_IO_PRIVATE_DATA));
if (Private == NULL) {
Status = EFI_OUT_OF_RESOURCES;
return Status;
}

Private->Signature              = EFI_PCI_IO_PRIVATE_DATA_SIGNATURE;  // Fill in signature
Private->RootBridge.Signature   = PCI_ROOT_BRIDGE_SIGNATURE;          // Fake Root Bridge structure needs a signature too
Private->RootBridge.MemoryStart = USB_EHCI_HCCAPBASE;                 // Get the USB capability register base
Private->Segment                = 0;                                  // Default to segment zero

// Find out the capability register length and number of physical ports.
CapabilityLength = MmioRead8(Private->RootBridge.MemoryStart);
PhysicalPorts    = (MmioRead32 (Private->RootBridge.MemoryStart + 0x4)) & 0x0000000F;

// Calculate the total size of the USB registers.
Private->RootBridge.MemorySize = CapabilityLength + (HOST_CONTROLLER_OPERATION_REG_SIZE + ((4 * PhysicalPorts) - 1));

// Enable Port Power bit in Port status and control registers in EHCI register space.
// Port Power Control (PPC) bit in the HCSPARAMS register is already set which indicates
// host controller implementation includes port power control.
for (Count = 0; Count < PhysicalPorts; Count++) {
MmioOr32 ((Private->RootBridge.MemoryStart + CapabilityLength + HOST_CONTROLLER_OPERATION_REG_SIZE + 4*Count), 0x00001000);
}

// Create fake PCI config space.
Private->ConfigSpace = AllocateZeroPool(sizeof(PCI_TYPE00));
if (Private->ConfigSpace == NULL) {
Status = EFI_OUT_OF_RESOURCES;
FreePool(Private);
return Status;
}

// Configure PCI config space
Private->ConfigSpace->Hdr.VendorId = 0xFFFF; // Invalid vendor Id as it is not an actual device.
Private->ConfigSpace->Hdr.DeviceId = 0x0000; // Not relevant as the vendor id is not valid.
Private->ConfigSpace->Hdr.ClassCode[0] = 0x20;
Private->ConfigSpace->Hdr.ClassCode[1] = 0x03;
Private->ConfigSpace->Hdr.ClassCode[2] = 0x0C;
Private->ConfigSpace->Device.Bar[0] = Private->RootBridge.MemoryStart;

Handle = NULL;

// Unique device path.
CopyMem(&Private->DevicePath, &PciIoDevicePathTemplate, sizeof(PciIoDevicePathTemplate));
Private->DevicePath.AcpiDevicePath.UID = 0;

// Copy protocol structure
CopyMem(&Private->PciIoProtocol, &PciIoTemplate, sizeof(PciIoTemplate));

Status = gBS->InstallMultipleProtocolInterfaces(&Handle,
                                             &gEfiPciIoProtocolGuid,       &Private->PciIoProtocol,


                                             &gEfiDevicePathProtocolGuid,  &Private->DevicePath,


                                             NULL);


if (EFI_ERROR(Status)) {
DEBUG((EFI_D_ERROR, "PciEmulationEntryPoint InstallMultipleProtocolInterfaces() failed.\n"));
}

return Status;

-}



diff --git a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.h b/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.h
deleted file mode 100644
index d5ee04318939..000000000000
--- a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef _PCI_ROOT_BRIDGE_H_
-#define _PCI_ROOT_BRIDGE_H_



-#include <PiDxe.h>



-#include <TPS65950.h>



-#include <Library/BaseLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/DebugLib.h>
-#include <Library/DxeServicesTableLib.h>
-#include <Library/IoLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/PciLib.h>
-#include <Library/UefiLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/OmapDmaLib.h>
-#include <Library/DmaLib.h>



-#include <Protocol/EmbeddedExternalDevice.h>
-#include <Protocol/DevicePath.h>
-#include <Protocol/PciIo.h>
-#include <Protocol/PciRootBridgeIo.h>
-#include <Protocol/PciHostBridgeResourceAllocation.h>



-#include <IndustryStandard/Pci22.h>
-#include <IndustryStandard/Acpi.h>



-#include <Omap3530/Omap3530.h>





-#define EFI_RESOURCE_NONEXISTENT  0xFFFFFFFFFFFFFFFFULL
-#define EFI_RESOURCE_LESS         0xFFFFFFFFFFFFFFFEULL
-#define EFI_RESOURCE_SATISFIED    0x0000000000000000ULL




-typedef struct {

ACPI_HID_DEVICE_PATH      AcpiDevicePath;
EFI_DEVICE_PATH_PROTOCOL  EndDevicePath;

-} EFI_PCI_ROOT_BRIDGE_DEVICE_PATH;




-#define ACPI_CONFIG_IO    0
-#define ACPI_CONFIG_MMIO  1
-#define ACPI_CONFIG_BUS   2



-typedef struct {

EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR Desc[3];
EFI_ACPI_END_TAG_DESCRIPTOR       EndDesc;

-} ACPI_CONFIG_INFO;




-#define PCI_ROOT_BRIDGE_SIGNATURE SIGNATURE_32 ('P', 'c', 'i', 'F')



-typedef struct {

UINT32                                            Signature;
EFI_HANDLE                                        Handle;
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL                   Io;
EFI_PCI_ROOT_BRIDGE_DEVICE_PATH                   DevicePath;

UINT8   StartBus;
UINT8   EndBus;
UINT16  Type;
UINT32  MemoryStart;
UINT32  MemorySize;
UINTN   IoOffset;
UINT32  IoStart;
UINT32  IoSize;
UINT64  PciAttributes;

ACPI_CONFIG_INFO  *Config;


-} PCI_ROOT_BRIDGE;




-#define INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(a) CR (a, PCI_ROOT_BRIDGE, Io, PCI_ROOT_BRIDGE_SIGNATURE)




-typedef union {

UINT8   volatile  *buf;
UINT8   volatile  *ui8;
UINT16  volatile  *ui16;
UINT32  volatile  *ui32;
UINT64  volatile  *ui64;
UINTN   volatile  ui;

-} PTR;





-EFI_STATUS
-EFIAPI
-PciRootBridgeIoPollMem (

IN  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN  UINT64                                 Address,
IN  UINT64                                 Mask,
IN  UINT64                                 Value,
IN  UINT64                                 Delay,
OUT UINT64                                 *Result
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoPollIo (

IN  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN  UINT64                                 Address,
IN  UINT64                                 Mask,
IN  UINT64                                 Value,
IN  UINT64                                 Delay,
OUT UINT64                                 *Result
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoMemRead (

IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN     UINT64                                 Address,
IN     UINTN                                  Count,
IN OUT VOID                                   *Buffer
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoMemWrite (

IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN     UINT64                                 Address,
IN     UINTN                                  Count,
IN OUT VOID                                   *Buffer
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoIoRead (

IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN     UINT64                                 UserAddress,
IN     UINTN                                  Count,
IN OUT VOID                                   *UserBuffer
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoIoWrite (

IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN     UINT64                                 UserAddress,
IN     UINTN                                  Count,
IN OUT VOID                                   *UserBuffer
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoCopyMem (

IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN UINT64                                 DestAddress,
IN UINT64                                 SrcAddress,
IN UINTN                                  Count
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoPciRead (

IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN     UINT64                                 Address,
IN     UINTN                                  Count,
IN OUT VOID                                   *Buffer
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoPciWrite (

IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN     UINT64                                 Address,
IN     UINTN                                  Count,
IN OUT VOID                                   *Buffer
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoMap (

IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL            *This,
IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION  Operation,
IN     VOID                                       *HostAddress,
IN OUT UINTN                                      *NumberOfBytes,
OUT    EFI_PHYSICAL_ADDRESS                       *DeviceAddress,
OUT    VOID                                       **Mapping
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoUnmap (

IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL  *This,
IN VOID                             *Mapping
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoAllocateBuffer (

IN  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL  *This,
IN  EFI_ALLOCATE_TYPE                Type,
IN  EFI_MEMORY_TYPE                  MemoryType,
IN  UINTN                            Pages,
OUT VOID                             **HostAddress,
IN  UINT64                           Attributes
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoFreeBuffer (

IN  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL  *This,
IN  UINTN                            Pages,
OUT VOID                             *HostAddress
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoFlush (

IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL  *This
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoGetAttributes (

IN  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL  *This,
OUT UINT64                           *Supported,
OUT UINT64                           *Attributes
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoSetAttributes (

IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL  *This,
IN     UINT64                           Attributes,
IN OUT UINT64                           *ResourceBase,
IN OUT UINT64                           *ResourceLength
);


-EFI_STATUS
-EFIAPI
-PciRootBridgeIoConfiguration (

IN  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL  *This,
OUT VOID                             **Resources
);


-//
-// Private Function Prototypes
-//
-EFI_STATUS
-EFIAPI
-PciRootBridgeIoMemRW (

IN  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN  UINTN                                  Count,
IN  BOOLEAN                                InStrideFlag,
IN  PTR                                    In,
IN  BOOLEAN                                OutStrideFlag,
OUT PTR                                    Out
);


-BOOLEAN
-PciIoMemAddressValid (

IN EFI_PCI_IO_PROTOCOL  *This,
IN UINT64               Address
);


-EFI_STATUS
-EmulatePciIoForEhci (

INTN    MvPciIfMaxIf
);


-#endif



diff --git a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.inf b/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.inf
deleted file mode 100644
index 02e09c334d28..000000000000
--- a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.inf
+++ /dev/null
@@ -1,56 +0,0 @@
-/** @file


Copyright (c) 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-[Defines]

INF_VERSION                     = 0x00010005
BASE_NAME                       = BeagleBoardPciEmulation
FILE_GUID                       = feaa2e2b-53ac-4d5e-ae10-1efd5da4a2ba
MODULE_TYPE                     = DXE_DRIVER
VERSION_STRING                  = 1.0

ENTRY_POINT                     = PciEmulationEntryPoint


-[Sources.common]

PciRootBridgeIo.c
PciEmulation.c


-[Packages]

MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
IntelFrameworkPkg/IntelFrameworkPkg.dec
ArmPkg/ArmPkg.dec
EmbeddedPkg/EmbeddedPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[LibraryClasses]

BaseLib
DxeServicesTableLib
UefiLib
UefiBootServicesTableLib
UefiDriverEntryPoint
UefiRuntimeServicesTableLib
IoLib
OmapDmaLib
DmaLib


-[Protocols]

gEfiPciRootBridgeIoProtocolGuid
gEfiDevicePathProtocolGuid
gEfiPciHostBridgeResourceAllocationProtocolGuid
gEfiPciIoProtocolGuid
gEmbeddedExternalDeviceProtocolGuid


-[Depex]

gEfiMetronomeArchProtocolGuid AND
gEmbeddedExternalDeviceProtocolGuid

diff --git a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciRootBridgeIo.c b/Chips/TexasInstruments/Omap35xx/PciEmulation/PciRootBridgeIo.c
deleted file mode 100644
index e8635ed88d91..000000000000
--- a/Chips/TexasInstruments/Omap35xx/PciEmulation/PciRootBridgeIo.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include "PciEmulation.h"



-BOOLEAN
-PciRootBridgeMemAddressValid (

IN PCI_ROOT_BRIDGE  *Private,
IN UINT64           Address
)

-{

if ((Address >= Private->MemoryStart) && (Address < (Private->MemoryStart + Private->MemorySize))) {
return TRUE;
}

return FALSE;

-}




-EFI_STATUS
-PciRootBridgeIoMemRW (

IN  EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN  UINTN                                  Count,
IN  BOOLEAN                                InStrideFlag,
IN  PTR                                    In,
IN  BOOLEAN                                OutStrideFlag,
OUT PTR                                    Out
)

-{

UINTN  Stride;
UINTN  InStride;
UINTN  OutStride;


Width     = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
Stride    = (UINTN)1 << Width;
InStride  = InStrideFlag  ? Stride : 0;
OutStride = OutStrideFlag ? Stride : 0;

//
// Loop for each iteration and move the data
//
switch (Width) {
case EfiPciWidthUint8:
for (;Count > 0; Count--, In.buf += InStride, Out.buf += OutStride) {
 *In.ui8 = *Out.ui8;


}
break;
case EfiPciWidthUint16:
for (;Count > 0; Count--, In.buf += InStride, Out.buf += OutStride) {
 *In.ui16 = *Out.ui16;


}
break;
case EfiPciWidthUint32:
for (;Count > 0; Count--, In.buf += InStride, Out.buf += OutStride) {
 *In.ui32 = *Out.ui32;


}
break;
default:
return EFI_INVALID_PARAMETER;
}

return EFI_SUCCESS;

-}



-EFI_STATUS
-PciRootBridgeIoPciRW (

IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN BOOLEAN                                Write,
IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN UINT64                                 UserAddress,
IN UINTN                                  Count,
IN OUT VOID                               *UserBuffer
)

-{

return EFI_SUCCESS;

-}



-/**

Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.

@param  This                  A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
@param  Width                 Signifies the width of the memory operations.
@param  Address               The base address of the memory operations.
@param  Count                 The number of memory operations to perform.
@param  Buffer                For read operations, the destination buffer to store the results. For write
                           operations, the source buffer to write data from.



@retval EFI_SUCCESS           The data was read from or written to the PCI root bridge.
@retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.


-**/
-EFI_STATUS
-EFIAPI
-PciRootBridgeIoMemRead (

IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN     UINT64                                 Address,
IN     UINTN                                  Count,
IN OUT VOID                                   *Buffer
)

-{

PCI_ROOT_BRIDGE   *Private;
UINTN             AlignMask;
PTR               In;
PTR               Out;

if ( Buffer == NULL ) {
return EFI_INVALID_PARAMETER;
}

Private = INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);

if (!PciRootBridgeMemAddressValid (Private, Address)) {
return EFI_INVALID_PARAMETER;
}

AlignMask = (1 << (Width & 0x03)) - 1;
if (Address & AlignMask) {
return EFI_INVALID_PARAMETER;
}

In.buf  = Buffer;
Out.buf = (VOID *)(UINTN) Address;

switch (Width) {
case EfiPciWidthUint8:
case EfiPciWidthUint16:
case EfiPciWidthUint32:
case EfiPciWidthUint64:
return PciRootBridgeIoMemRW (Width, Count, TRUE, In, TRUE, Out);

case EfiPciWidthFifoUint8:
case EfiPciWidthFifoUint16:
case EfiPciWidthFifoUint32:
case EfiPciWidthFifoUint64:
return PciRootBridgeIoMemRW (Width, Count, TRUE, In, FALSE, Out);

case EfiPciWidthFillUint8:
case EfiPciWidthFillUint16:
case EfiPciWidthFillUint32:
case EfiPciWidthFillUint64:
return PciRootBridgeIoMemRW (Width, Count, FALSE, In, TRUE, Out);

default:
break;
}

return EFI_INVALID_PARAMETER;

-}





-/**

Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.

@param  This                  A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
@param  Width                 Signifies the width of the memory operations.
@param  Address               The base address of the memory operations.
@param  Count                 The number of memory operations to perform.
@param  Buffer                For read operations, the destination buffer to store the results. For write
                           operations, the source buffer to write data from.



@retval EFI_SUCCESS           The data was read from or written to the PCI root bridge.
@retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.


-**/
-EFI_STATUS
-EFIAPI
-PciRootBridgeIoMemWrite (

IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN     UINT64                                 Address,
IN     UINTN                                  Count,
IN OUT VOID                                   *Buffer
)

-{

PCI_ROOT_BRIDGE *Private;
UINTN  AlignMask;
PTR    In;
PTR    Out;

if ( Buffer == NULL ) {
return EFI_INVALID_PARAMETER;
}

Private = INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);

if (!PciRootBridgeMemAddressValid (Private, Address)) {
return EFI_INVALID_PARAMETER;
}

AlignMask = (1 << (Width & 0x03)) - 1;
if (Address & AlignMask) {
return EFI_INVALID_PARAMETER;
}

In.buf  = (VOID *)(UINTN) Address;
Out.buf = Buffer;

switch (Width) {
case EfiPciWidthUint8:
case EfiPciWidthUint16:
case EfiPciWidthUint32:
case EfiPciWidthUint64:
return PciRootBridgeIoMemRW (Width, Count, TRUE, In, TRUE, Out);

case EfiPciWidthFifoUint8:
case EfiPciWidthFifoUint16:
case EfiPciWidthFifoUint32:
case EfiPciWidthFifoUint64:
return PciRootBridgeIoMemRW (Width, Count, FALSE, In, TRUE, Out);

case EfiPciWidthFillUint8:
case EfiPciWidthFillUint16:
case EfiPciWidthFillUint32:
case EfiPciWidthFillUint64:
return PciRootBridgeIoMemRW (Width, Count, TRUE, In, FALSE, Out);

default:
break;
}

return EFI_INVALID_PARAMETER;

-}



-/**

Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.

@param  This                  A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
@param  Width                 Signifies the width of the memory operations.
@param  Address               The base address of the memory operations.
@param  Count                 The number of memory operations to perform.
@param  Buffer                For read operations, the destination buffer to store the results. For write
                           operations, the source buffer to write data from.



@retval EFI_SUCCESS           The data was read from or written to the PCI root bridge.
@retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.


-**/
-EFI_STATUS
-EFIAPI
-PciRootBridgeIoPciRead (

IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN     UINT64                                 Address,
IN     UINTN                                  Count,
IN OUT VOID                                   *Buffer
)

-{

if (Buffer == NULL) {
return EFI_INVALID_PARAMETER;
}

return PciRootBridgeIoPciRW (This, FALSE, Width, Address, Count, Buffer);

-}





-/**

Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.

@param  This                  A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
@param  Width                 Signifies the width of the memory operations.
@param  Address               The base address of the memory operations.
@param  Count                 The number of memory operations to perform.
@param  Buffer                For read operations, the destination buffer to store the results. For write
                           operations, the source buffer to write data from.



@retval EFI_SUCCESS           The data was read from or written to the PCI root bridge.
@retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.


-**/
-EFI_STATUS
-EFIAPI
-PciRootBridgeIoPciWrite (

IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL        *This,
IN     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH  Width,
IN     UINT64                                 Address,
IN     UINTN                                  Count,
IN OUT VOID                                   *Buffer
)

-{

if (Buffer == NULL) {
return EFI_INVALID_PARAMETER;
}

return PciRootBridgeIoPciRW (This, TRUE, Width, Address, Count, Buffer);

-}




diff --git a/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.c b/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.c
deleted file mode 100644
index f2f43e252fdd..000000000000
--- a/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include <Uefi.h>
-#include <Omap3530/Omap3530.h>



-#include <Library/DebugLib.h>
-#include <Library/IoLib.h>
-#include <Library/UefiBootServicesTableLib.h>



-#include <Protocol/SmbusHc.h>



-#define MAX_RETRY  1000



-//
-// Internal Functions
-//
-STATIC
-EFI_STATUS
-WaitForBusBusy (

VOID
)

-{

UINTN Retry = 0;

while (++Retry < MAX_RETRY && (MmioRead16(I2C_STAT) & BB) == 0x1);

if (Retry == MAX_RETRY) {
return EFI_TIMEOUT;
}

return EFI_SUCCESS;

-}



-STATIC
-EFI_STATUS
-PollForStatus(

UINT16 StatusBit
)

-{

UINTN Retry = 0;

while(Retry < MAX_RETRY) {
if (MmioRead16(I2C_STAT) & StatusBit) {
 //Clear particular status bit from Status register.


 MmioOr16(I2C_STAT, StatusBit);


 break;


}
Retry++;
}

if (Retry == MAX_RETRY) {
return EFI_TIMEOUT;
}

return EFI_SUCCESS;

-}



-STATIC
-EFI_STATUS
-ConfigureI2c (

VOID
)

-{

//Program prescaler to obtain 12-MHz clock
MmioWrite16(I2C_PSC, 0x0000);

//Program SCLL and SCLH
//NOTE: Following values are the register dump after U-Boot code executed.
//We need to figure out how its calculated based on the I2C functional clock and I2C_PSC.
MmioWrite16(I2C_SCLL, 0x0035);
MmioWrite16(I2C_SCLH, 0x0035);

//Take the I2C controller out of reset.
MmioOr16(I2C_CON, I2C_EN);

//Initialize the I2C controller.

//Set I2C controller in Master mode.
MmioOr16(I2C_CON, MST);

//Enable interrupts for receive/transmit mode.
MmioOr16(I2C_IE, (XRDY_IE | RRDY_IE | ARDY_IE | NACK_IE));

return EFI_SUCCESS;

-}



-STATIC
-EFI_STATUS
-I2CReadOneByte (

UINT8 *Data
)

-{

EFI_STATUS Status;

//I2C bus status checking
Status = WaitForBusBusy();
if (EFI_ERROR(Status)) {
return Status;
}

//Poll till Receive ready bit is set.
Status = PollForStatus(RRDY);
if (EFI_ERROR(Status)) {
return Status;
}

*Data = MmioRead8(I2C_DATA);

return EFI_SUCCESS;

-}



-STATIC
-EFI_STATUS
-I2CWriteOneByte (

UINT8 Data
)

-{

EFI_STATUS Status;

//I2C bus status checking
Status = WaitForBusBusy();
if (EFI_ERROR(Status)) {
return Status;
}

//Data transfer
//Poll till Transmit ready bit is set
Status = PollForStatus(XRDY);
if (EFI_ERROR(Status)) {
return Status;
}

MmioWrite8(I2C_DATA, Data);

//Wait and check if the NACK is not set.
gBS->Stall(1000);
if (MmioRead16(I2C_STAT) & NACK) {
return EFI_DEVICE_ERROR;
}

return EFI_SUCCESS;

-}



-STATIC
-EFI_STATUS
-SmbusBlockRead (

OUT UINT8       *Buffer,
IN  UINTN       Length
)

-{

UINTN      Index = 0;
EFI_STATUS Status = EFI_SUCCESS;

//Transfer configuration for receiving data.
MmioWrite16(I2C_CNT, Length);
//Need stop bit before sending data.
MmioWrite16(I2C_CON, (I2C_EN | MST | STP | STT));

while (Index < Length) {
//Read a byte
Status = I2CReadOneByte(&Buffer[Index++]);
if (EFI_ERROR(Status)) {
 return Status;


}
}

//Transfer completion
Status = PollForStatus(ARDY);
if (EFI_ERROR(Status)) {
return Status;
}

return Status;

-}



-STATIC
-EFI_STATUS
-SmbusBlockWrite (

IN UINT8       *Buffer,
IN UINTN       Length
)

-{

UINTN      Index = 0;
EFI_STATUS Status = EFI_SUCCESS;

//Transfer configuration for transmitting data
MmioWrite16(I2C_CNT, Length);
MmioWrite16(I2C_CON, (I2C_EN | TRX | MST | STT | STP));

while (Index < Length) {
//Send a byte
Status = I2CWriteOneByte(Buffer[Index++]);
if (EFI_ERROR(Status)) {
 return Status;


}
}

//Transfer completion
Status = PollForStatus(ARDY);
if (EFI_ERROR(Status)) {
return Status;
}

return Status;

-}



-//
-// Public Functions.
-//
-EFI_STATUS
-EFIAPI
-SmbusExecute (

IN CONST EFI_SMBUS_HC_PROTOCOL    *This,
IN CONST EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
IN CONST EFI_SMBUS_DEVICE_COMMAND Command,
IN CONST EFI_SMBUS_OPERATION      Operation,
IN CONST BOOLEAN                  PecCheck,
IN OUT   UINTN                    *Length,
IN OUT   VOID                     *Buffer
)

-{

UINT8      *ByteBuffer  = Buffer;
EFI_STATUS Status       = EFI_SUCCESS;
UINT8      SlaveAddr    = (UINT8)(SlaveAddress.SmbusDeviceAddress);

if (PecCheck) {
return EFI_UNSUPPORTED;
}

if ((Operation != EfiSmbusWriteBlock) && (Operation != EfiSmbusReadBlock)) {
return EFI_UNSUPPORTED;
}

//Set the Slave address.
MmioWrite16(I2C_SA, SlaveAddr);

if (Operation == EfiSmbusReadBlock) {
Status = SmbusBlockRead(ByteBuffer, *Length);
} else if (Operation == EfiSmbusWriteBlock) {
Status = SmbusBlockWrite(ByteBuffer, *Length);
}

return Status;

-}



-EFI_STATUS
-EFIAPI
-SmbusArpDevice (

IN CONST EFI_SMBUS_HC_PROTOCOL    *This,
IN       BOOLEAN                  ArpAll,
IN       EFI_SMBUS_UDID           *SmbusUdid OPTIONAL,
IN OUT   EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress OPTIONAL
)

-{

return EFI_UNSUPPORTED;

-}




-EFI_STATUS
-EFIAPI
-SmbusGetArpMap (

IN CONST EFI_SMBUS_HC_PROTOCOL    *This,
IN OUT   UINTN                    *Length,
IN OUT   EFI_SMBUS_DEVICE_MAP     **SmbusDeviceMap
)

-{

return EFI_UNSUPPORTED;

-}




-EFI_STATUS
-EFIAPI
-SmbusNotify (

IN CONST  EFI_SMBUS_HC_PROTOCOL     *This,
IN CONST  EFI_SMBUS_DEVICE_ADDRESS  SlaveAddress,
IN CONST  UINTN                     Data,
IN CONST  EFI_SMBUS_NOTIFY_FUNCTION NotifyFunction
)

-{

return EFI_UNSUPPORTED;

-}



-EFI_SMBUS_HC_PROTOCOL SmbusProtocol =
-{

SmbusExecute,
SmbusArpDevice,
SmbusGetArpMap,
SmbusNotify

-};



-EFI_STATUS
-InitializeSmbus (

IN EFI_HANDLE       ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)

-{

EFI_HANDLE      Handle = NULL;
EFI_STATUS      Status;

//Configure I2C controller.
Status = ConfigureI2c();
if (EFI_ERROR(Status)) {
DEBUG ((EFI_D_ERROR, "InitializeI2c fails.\n"));
return Status;
}

// Install the SMBUS interface
Status = gBS->InstallMultipleProtocolInterfaces(&Handle, &gEfiSmbusHcProtocolGuid, &SmbusProtocol, NULL);
ASSERT_EFI_ERROR(Status);

return Status;

-}



diff --git a/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf b/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf
deleted file mode 100644
index a92474f41f20..000000000000
--- a/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf
+++ /dev/null
@@ -1,45 +0,0 @@
-#/** @file
-#
-#  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = Smbus
FILE_GUID                      = d5125e0f-1226-444f-a218-0085996ed5da
MODULE_TYPE                    = DXE_DRIVER
VERSION_STRING                 = 1.0

ENTRY_POINT                    = InitializeSmbus


-[Sources.common]

Smbus.c


-[Packages]

MdePkg/MdePkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[LibraryClasses]

PcdLib
UefiLib
UefiDriverEntryPoint
MemoryAllocationLib
IoLib


-[Guids]



-[Protocols]

gEfiSmbusHcProtocolGuid


-[Pcd]



-[depex]

TRUE

diff --git a/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.c b/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.c
deleted file mode 100644
index 66f9d853ff11..000000000000
--- a/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include <Uefi.h>



-#include <TPS65950.h>



-#include <Library/BaseMemoryLib.h>
-#include <Library/DebugLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiBootServicesTableLib.h>



-#include <Protocol/EmbeddedExternalDevice.h>
-#include <Protocol/SmbusHc.h>



-EFI_SMBUS_HC_PROTOCOL *Smbus;



-EFI_STATUS
-Read (

IN  EMBEDDED_EXTERNAL_DEVICE    *This,
IN  UINTN                       Register,
IN  UINTN                       Length,
OUT VOID                        *Buffer
)

-{

EFI_STATUS               Status;
EFI_SMBUS_DEVICE_ADDRESS SlaveAddress;
UINT8                    DeviceRegister;
UINTN                    DeviceRegisterLength = 1;

SlaveAddress.SmbusDeviceAddress = EXTERNAL_DEVICE_REGISTER_TO_SLAVE_ADDRESS(Register);
DeviceRegister = (UINT8)EXTERNAL_DEVICE_REGISTER_TO_REGISTER(Register);

//Write DeviceRegister.
Status = Smbus->Execute(Smbus, SlaveAddress, 0, EfiSmbusWriteBlock, FALSE, &DeviceRegisterLength, &DeviceRegister);
if (EFI_ERROR(Status)) {
return Status;
}

//Read Data
Status = Smbus->Execute(Smbus, SlaveAddress, 0, EfiSmbusReadBlock, FALSE, &Length, Buffer);
return Status;

-}



-EFI_STATUS
-Write (

IN EMBEDDED_EXTERNAL_DEVICE   *This,
IN UINTN                      Register,
IN UINTN                      Length,
IN VOID                       *Buffer
)

-{

EFI_STATUS               Status;
EFI_SMBUS_DEVICE_ADDRESS SlaveAddress;
UINT8                    DeviceRegister;
UINTN                    DeviceBufferLength = Length + 1;
UINT8                    *DeviceBuffer;

SlaveAddress.SmbusDeviceAddress = EXTERNAL_DEVICE_REGISTER_TO_SLAVE_ADDRESS(Register);
DeviceRegister = (UINT8)EXTERNAL_DEVICE_REGISTER_TO_REGISTER(Register);

//Prepare buffer for writing
DeviceBuffer = (UINT8 *)AllocatePool(DeviceBufferLength);
if (DeviceBuffer == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto exit;
}

//Set Device register followed by data to write.
DeviceBuffer[0] = DeviceRegister;
CopyMem(&DeviceBuffer[1], Buffer, Length);

//Write Data
Status = Smbus->Execute(Smbus, SlaveAddress, 0, EfiSmbusWriteBlock, FALSE, &DeviceBufferLength, DeviceBuffer);
if (EFI_ERROR(Status)) {
goto exit;
}


-exit:

if (DeviceBuffer) {
FreePool(DeviceBuffer);
}

return Status;

-}



-EMBEDDED_EXTERNAL_DEVICE ExternalDevice = {

Read,
Write

-};



-EFI_STATUS
-TPS65950Initialize (

IN EFI_HANDLE         ImageHandle,
IN EFI_SYSTEM_TABLE   *SystemTable
)

-{

EFI_STATUS  Status;

Status = gBS->LocateProtocol(&gEfiSmbusHcProtocolGuid, NULL, (VOID **)&Smbus);
ASSERT_EFI_ERROR(Status);

Status = gBS->InstallMultipleProtocolInterfaces(&ImageHandle, &gEmbeddedExternalDeviceProtocolGuid, &ExternalDevice, NULL);
return Status;

-}
diff --git a/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf b/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf
deleted file mode 100644
index bd851551042d..000000000000
--- a/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf
+++ /dev/null
@@ -1,48 +0,0 @@
-#/** @file
-#
-#  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = TPS65950
FILE_GUID                      = 71fe861a-5450-48b6-bfb0-b93522616f99
MODULE_TYPE                    = DXE_DRIVER
VERSION_STRING                 = 1.0

ENTRY_POINT                    = TPS65950Initialize



-[Sources.common]

TPS65950.c


-[Packages]

MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[LibraryClasses]

BaseMemoryLib
PcdLib
UefiLib
UefiDriverEntryPoint
MemoryAllocationLib


-[Guids]



-[Protocols]

gEfiSmbusHcProtocolGuid
gEmbeddedExternalDeviceProtocolGuid


-[Pcd]



-[depex]

gEfiSmbusHcProtocolGuid

diff --git a/Chips/TexasInstruments/Omap35xx/TimerDxe/Timer.c b/Chips/TexasInstruments/Omap35xx/TimerDxe/Timer.c
deleted file mode 100644
index 8b56d457e413..000000000000
--- a/Chips/TexasInstruments/Omap35xx/TimerDxe/Timer.c
+++ /dev/null
@@ -1,376 +0,0 @@
-/** @file

Template for Timer Architecture Protocol driver of the ARM flavor

Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/




-#include <PiDxe.h>



-#include <Library/BaseLib.h>
-#include <Library/DebugLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiLib.h>
-#include <Library/PcdLib.h>
-#include <Library/IoLib.h>
-#include <Library/OmapLib.h>



-#include <Protocol/Timer.h>
-#include <Protocol/HardwareInterrupt.h>



-#include <Omap3530/Omap3530.h>




-// The notification function to call on every timer interrupt.
-volatile EFI_TIMER_NOTIFY      mTimerNotifyFunction   = (EFI_TIMER_NOTIFY)NULL;




-// The current period of the timer interrupt
-volatile UINT64 mTimerPeriod = 0;



-// Cached copy of the Hardware Interrupt protocol instance
-EFI_HARDWARE_INTERRUPT_PROTOCOL *gInterrupt = NULL;



-// Cached registers
-volatile UINT32 TISR;
-volatile UINT32 TCLR;
-volatile UINT32 TLDR;
-volatile UINT32 TCRR;
-volatile UINT32 TIER;



-// Cached interrupt vector
-volatile UINTN  gVector;




-/**


C Interrupt Handler calledin the interrupt context when Source interrupt is active.


@param Source         Source of the interrupt. Hardware routing off a specific platform defines
                   what source means.



@param SystemContext  Pointer to system register context. Mostly used by debuggers and will
                   update the system context after the return from the interrupt if


                   modified. Don't change these values unless you know what you are doing




-**/
-VOID
-EFIAPI
-TimerInterruptHandler (

IN  HARDWARE_INTERRUPT_SOURCE   Source,
IN  EFI_SYSTEM_CONTEXT          SystemContext
)

-{

EFI_TPL OriginalTPL;



//
// DXE core uses this callback for the EFI timer tick. The DXE core uses locks
// that raise to TPL_HIGH and then restore back to current level. Thus we need
// to make sure TPL level is set to TPL_HIGH while we are handling the timer tick.
//
OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);

if (mTimerNotifyFunction) {
mTimerNotifyFunction(mTimerPeriod);
}

// Clear all timer interrupts
MmioWrite32 (TISR, TISR_CLEAR_ALL);

// Poll interrupt status bits to ensure clearing
while ((MmioRead32 (TISR) & TISR_ALL_INTERRUPT_MASK) != TISR_NO_INTERRUPTS_PENDING);

gBS->RestoreTPL (OriginalTPL);

-}



-/**

This function registers the handler NotifyFunction so it is called every time
the timer interrupt fires.  It also passes the amount of time since the last
handler call to the NotifyFunction.  If NotifyFunction is NULL, then the
handler is unregistered.  If the handler is registered, then EFI_SUCCESS is
returned.  If the CPU does not support registering a timer interrupt handler,
then EFI_UNSUPPORTED is returned.  If an attempt is made to register a handler
when a handler is already registered, then EFI_ALREADY_STARTED is returned.
If an attempt is made to unregister a handler when a handler is not registered,
then EFI_INVALID_PARAMETER is returned.  If an error occurs attempting to
register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR
is returned.

@param  This             The EFI_TIMER_ARCH_PROTOCOL instance.
@param  NotifyFunction   The function to call when a timer interrupt fires. This
                      function executes at TPL_HIGH_LEVEL. The DXE Core will


                      register a handler for the timer interrupt, so it can know


                      how much time has passed. This information is used to


                      signal timer based events. NULL will unregister the handler.


@retval EFI_SUCCESS           The timer handler was registered.
@retval EFI_UNSUPPORTED       The platform does not support timer interrupts.
@retval EFI_ALREADY_STARTED   NotifyFunction is not NULL, and a handler is already
                           registered.


@retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not
                           previously registered.


@retval EFI_DEVICE_ERROR      The timer handler could not be registered.


-**/
-EFI_STATUS
-EFIAPI
-TimerDriverRegisterHandler (

IN EFI_TIMER_ARCH_PROTOCOL  *This,
IN EFI_TIMER_NOTIFY         NotifyFunction
)

-{

if ((NotifyFunction == NULL) && (mTimerNotifyFunction == NULL)) {
return EFI_INVALID_PARAMETER;
}

if ((NotifyFunction != NULL) && (mTimerNotifyFunction != NULL)) {
return EFI_ALREADY_STARTED;
}

mTimerNotifyFunction = NotifyFunction;

return EFI_SUCCESS;

-}



-/**


This function adjusts the period of timer interrupts to the value specified
by TimerPeriod.  If the timer period is updated, then the selected timer
period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned.  If
the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
If an error occurs while attempting to update the timer period, then the
timer hardware will be put back in its state prior to this call, and
EFI_DEVICE_ERROR is returned.  If TimerPeriod is 0, then the timer interrupt
is disabled.  This is not the same as disabling the CPU's interrupts.
Instead, it must either turn off the timer hardware, or it must adjust the
interrupt controller so that a CPU interrupt is not generated when the timer
interrupt fires.

@param  This             The EFI_TIMER_ARCH_PROTOCOL instance.
@param  TimerPeriod      The rate to program the timer interrupt in 100 nS units. If
                      the timer hardware is not programmable, then EFI_UNSUPPORTED is


                      returned. If the timer is programmable, then the timer period


                      will be rounded up to the nearest timer period that is supported


                      by the timer hardware. If TimerPeriod is set to 0, then the


                      timer interrupts will be disabled.




@retval EFI_SUCCESS           The timer period was changed.
@retval EFI_UNSUPPORTED       The platform cannot change the period of the timer interrupt.
@retval EFI_DEVICE_ERROR      The timer period could not be changed due to a device error.


-**/
-EFI_STATUS
-EFIAPI
-TimerDriverSetTimerPeriod (

IN EFI_TIMER_ARCH_PROTOCOL  *This,
IN UINT64                   TimerPeriod
)

-{

EFI_STATUS  Status;
UINT64      TimerCount;
INT32       LoadValue;

if (TimerPeriod == 0) {
// Turn off GPTIMER3
MmioWrite32 (TCLR, TCLR_ST_OFF);

Status = gInterrupt->DisableInterruptSource(gInterrupt, gVector);
} else {
// Calculate required timer count
TimerCount = DivU64x32(TimerPeriod * 100, PcdGet32(PcdEmbeddedPerformanceCounterPeriodInNanoseconds));

// Set GPTIMER3 Load register
LoadValue = (INT32) -TimerCount;
MmioWrite32 (TLDR, LoadValue);
MmioWrite32 (TCRR, LoadValue);

// Enable Overflow interrupt
MmioWrite32 (TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_ENABLE | TIER_MAT_IT_DISABLE);

// Turn on GPTIMER3, it will reload at overflow
MmioWrite32 (TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON);

Status = gInterrupt->EnableInterruptSource(gInterrupt, gVector);
}

//
// Save the new timer period
//
mTimerPeriod = TimerPeriod;
return Status;

-}




-/**

This function retrieves the period of timer interrupts in 100 ns units,
returns that value in TimerPeriod, and returns EFI_SUCCESS.  If TimerPeriod
is NULL, then EFI_INVALID_PARAMETER is returned.  If a TimerPeriod of 0 is
returned, then the timer is currently disabled.

@param  This             The EFI_TIMER_ARCH_PROTOCOL instance.
@param  TimerPeriod      A pointer to the timer period to retrieve in 100 ns units. If
                      0 is returned, then the timer is currently disabled.




@retval EFI_SUCCESS           The timer period was returned in TimerPeriod.
@retval EFI_INVALID_PARAMETER TimerPeriod is NULL.


-**/
-EFI_STATUS
-EFIAPI
-TimerDriverGetTimerPeriod (

IN EFI_TIMER_ARCH_PROTOCOL   *This,
OUT UINT64                   *TimerPeriod
)

-{

if (TimerPeriod == NULL) {
return EFI_INVALID_PARAMETER;
}

*TimerPeriod = mTimerPeriod;
return EFI_SUCCESS;

-}



-/**

This function generates a soft timer interrupt. If the platform does not support soft
timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned.
If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler()
service, then a soft timer interrupt will be generated. If the timer interrupt is
enabled when this service is called, then the registered handler will be invoked. The
registered handler should not be able to distinguish a hardware-generated timer
interrupt from a software-generated timer interrupt.

@param  This             The EFI_TIMER_ARCH_PROTOCOL instance.

@retval EFI_SUCCESS           The soft timer interrupt was generated.
@retval EFI_UNSUPPORTED       The platform does not support the generation of soft timer interrupts.


-**/
-EFI_STATUS
-EFIAPI
-TimerDriverGenerateSoftInterrupt (

IN EFI_TIMER_ARCH_PROTOCOL  *This
)

-{

return EFI_UNSUPPORTED;

-}




-/**

Interface stucture for the Timer Architectural Protocol.

@par Protocol Description:
This protocol provides the services to initialize a periodic timer
interrupt, and to register a handler that is called each time the timer
interrupt fires.  It may also provide a service to adjust the rate of the
periodic timer interrupt.  When a timer interrupt occurs, the handler is
passed the amount of time that has passed since the previous timer
interrupt.

@param RegisterHandler
Registers a handler that will be called each time the
timer interrupt fires.  TimerPeriod defines the minimum
time between timer interrupts, so TimerPeriod will also
be the minimum time between calls to the registered
handler.

@param SetTimerPeriod
Sets the period of the timer interrupt in 100 nS units.
This function is optional, and may return EFI_UNSUPPORTED.
If this function is supported, then the timer period will
be rounded up to the nearest supported timer period.


@param GetTimerPeriod
Retrieves the period of the timer interrupt in 100 nS units.

@param GenerateSoftInterrupt
Generates a soft timer interrupt that simulates the firing of
the timer interrupt. This service can be used to invoke the   registered handler if the timer interrupt has been masked for
a period of time.


-**/
-EFI_TIMER_ARCH_PROTOCOL   gTimer = {

TimerDriverRegisterHandler,
TimerDriverSetTimerPeriod,
TimerDriverGetTimerPeriod,
TimerDriverGenerateSoftInterrupt

-};




-/**

Initialize the state information for the Timer Architectural Protocol and
the Timer Debug support protocol that allows the debugger to break into a
running program.

@param  ImageHandle   of the loaded driver
@param  SystemTable   Pointer to the System Table

@retval EFI_SUCCESS           Protocol registered
@retval EFI_OUT_OF_RESOURCES  Cannot allocate protocol data structure
@retval EFI_DEVICE_ERROR      Hardware problems


-**/
-EFI_STATUS
-EFIAPI
-TimerInitialize (

IN EFI_HANDLE         ImageHandle,
IN EFI_SYSTEM_TABLE   *SystemTable
)

-{

EFI_HANDLE  Handle = NULL;
EFI_STATUS  Status;
UINT32      TimerBaseAddress;

// Find the interrupt controller protocol.  ASSERT if not found.
Status = gBS->LocateProtocol (&gHardwareInterruptProtocolGuid, NULL, (VOID **)&gInterrupt);
ASSERT_EFI_ERROR (Status);

// Set up the timer registers
TimerBaseAddress = TimerBase (FixedPcdGet32(PcdOmap35xxArchTimer));
TISR = TimerBaseAddress + GPTIMER_TISR;
TCLR = TimerBaseAddress + GPTIMER_TCLR;
TLDR = TimerBaseAddress + GPTIMER_TLDR;
TCRR = TimerBaseAddress + GPTIMER_TCRR;
TIER = TimerBaseAddress + GPTIMER_TIER;

// Disable the timer
Status = TimerDriverSetTimerPeriod (&gTimer, 0);
ASSERT_EFI_ERROR (Status);

// Install interrupt handler
gVector = InterruptVectorForTimer (FixedPcdGet32(PcdOmap35xxArchTimer));
Status = gInterrupt->RegisterInterruptSource (gInterrupt, gVector, TimerInterruptHandler);
ASSERT_EFI_ERROR (Status);

// Turn on the functional clock for Timer
MmioOr32 (CM_FCLKEN_PER, CM_FCLKEN_PER_EN_GPT3_ENABLE);

// Set up default timer
Status = TimerDriverSetTimerPeriod (&gTimer, FixedPcdGet32(PcdTimerPeriod));
ASSERT_EFI_ERROR (Status);

// Install the Timer Architectural Protocol onto a new handle
Status = gBS->InstallMultipleProtocolInterfaces (
             &Handle,


             &gEfiTimerArchProtocolGuid,      &gTimer,


             NULL


             );


ASSERT_EFI_ERROR(Status);

return Status;

-}



diff --git a/Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf b/Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf
deleted file mode 100644
index 6344a1d28889..000000000000
--- a/Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf
+++ /dev/null
@@ -1,57 +0,0 @@
-#/** @file
-#
-#    Component description file for Timer module
-#
-#  Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = BeagleBoardTimerDxe
FILE_GUID                      = 6ddbf08b-cfc9-43cc-9e81-0784ba312ca0
MODULE_TYPE                    = DXE_DRIVER
VERSION_STRING                 = 1.0

ENTRY_POINT                    = TimerInitialize


-[Sources.common]

Timer.c


-[Packages]

OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec
MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
ArmPkg/ArmPkg.dec


-[LibraryClasses]

BaseLib
UefiRuntimeServicesTableLib
UefiLib
UefiBootServicesTableLib
BaseMemoryLib
DebugLib
UefiDriverEntryPoint
IoLib
OmapLib


-[Guids]



-[Protocols]

gEfiTimerArchProtocolGuid
gHardwareInterruptProtocolGuid


-[Pcd.common]

gEmbeddedTokenSpaceGuid.PcdTimerPeriod
gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterPeriodInNanoseconds
gOmap35xxTokenSpaceGuid.PcdOmap35xxArchTimer


-[Depex]

gHardwareInterruptProtocolGuid

diff --git a/Platforms/TexasInstruments/BeagleBoard/Bds/Bds.inf b/Platforms/TexasInstruments/BeagleBoard/Bds/Bds.inf
deleted file mode 100644
index 2b20a09549d5..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Bds/Bds.inf
+++ /dev/null
@@ -1,65 +0,0 @@



-#/** @file
-#
-#    Component description file for Bds module
-#
-#  Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
-#
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = BeagleBoardBds
FILE_GUID                      = 934431fe-5745-402e-913d-17b4434eb0f3
MODULE_TYPE                    = DXE_DRIVER
VERSION_STRING                 = 1.0

ENTRY_POINT                    = BdsInitialize


-[Sources.common]

BdsEntry.c
FirmwareVolume.c


-[Packages]

MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec


-[LibraryClasses]

DevicePathLib
BaseLib
HobLib
UefiRuntimeServicesTableLib
ReportStatusCodeLib
PerformanceLib
DxeServicesTableLib
MemoryAllocationLib
UefiLib
UefiBootServicesTableLib
BaseMemoryLib
DebugLib
PrintLib
UefiDriverEntryPoint


-[Guids]




-[Protocols]

gEfiBdsArchProtocolGuid
gEfiSimpleTextInProtocolGuid
gEfiSimpleTextOutProtocolGuid
gEfiSerialIoProtocolGuid
gEfiDevicePathProtocolGuid
gEfiSimpleFileSystemProtocolGuid
gEfiUsbIoProtocolGuid
gEfiFirmwareVolume2ProtocolGuid


-[Depex]

TRUE

diff --git a/Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.c b/Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.c
deleted file mode 100644
index f2f1ae3983a6..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/** @file

The entry of the embedded BDS. This BDS does not follow the Boot Manager requirements
of the UEFI specification as it is designed to implement an embedded systmes
propriatary boot scheme.

This template assume a DXE driver produces a SerialIo protocol not using the EFI
driver module and it will attempt to connect a console on top of this.

Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include "BdsEntry.h"




-BOOLEAN     gConsolePresent = FALSE;



-EFI_BDS_ARCH_PROTOCOL  gBdsProtocol = {

BdsEntry,

-};






-/**

This function uses policy data from the platform to determine what operating
system or system utility should be loaded and invoked.  This function call
also optionally make the use of user input to determine the operating system
or system utility to be loaded and invoked.  When the DXE Core has dispatched
all the drivers on the dispatch queue, this function is called.  This
function will attempt to connect the boot devices required to load and invoke
the selected operating system or system utility.  During this process,
additional firmware volumes may be discovered that may contain addition DXE
drivers that can be dispatched by the DXE Core.   If a boot device cannot be
fully connected, this function calls the DXE Service Dispatch() to allow the
DXE drivers from any newly discovered firmware volumes to be dispatched.
Then the boot device connection can be attempted again.  If the same boot
device connection operation fails twice in a row, then that boot device has
failed, and should be skipped.  This function should never return.

@param  This             The EFI_BDS_ARCH_PROTOCOL instance.

@return None.


-**/
-VOID
-EFIAPI
-BdsEntry (

IN EFI_BDS_ARCH_PROTOCOL  *This
)

-{

EFI_STATUS                Status;
UINTN                     NoHandles;
EFI_HANDLE                *Buffer;
EFI_HANDLE                FvHandle;
EFI_HANDLE                ImageHandle;
EFI_HANDLE                UsbDeviceHandle;
EFI_GUID                  NameGuid;
UINTN                     Size;
UINTN                     HandleCount;
UINTN                     OldHandleCount;
EFI_HANDLE                *HandleBuffer;
UINTN                     Index;
EFI_DEVICE_PATH_PROTOCOL  *LoadImageDevicePath;
EFI_DEVICE_PATH_PROTOCOL  *FileSystemDevicePath;

PERF_END   (NULL, "DXE", NULL, 0);
PERF_START (NULL, "BDS", NULL, 0);


//
// Now do the EFI stuff
//
Size = 0x100;
gST->FirmwareVendor = AllocateRuntimePool (Size);
ASSERT (gST->FirmwareVendor != NULL);

UnicodeSPrint (gST->FirmwareVendor, Size, L"BeagleBoard EFI %a %a", __DATE__, __TIME__);

//
// Now we need to setup the EFI System Table with information about the console devices.
// This code is normally in the console spliter driver on platforms that support multiple
// consoles at the same time
//
Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiSimpleTextOutProtocolGuid, NULL, &NoHandles, &Buffer);
if (!EFI_ERROR (Status)) {
// Use the first SimpleTextOut we find and update the EFI System Table
gST->ConsoleOutHandle = Buffer[0];
gST->StandardErrorHandle = Buffer[0];
Status = gBS->HandleProtocol (Buffer[0], &gEfiSimpleTextOutProtocolGuid, (VOID **)&gST->ConOut);
ASSERT_EFI_ERROR (Status);

gST->StdErr = gST->ConOut;

gST->ConOut->OutputString (gST->ConOut, L"BDS: Console Started!!!!\n\r");
FreePool (Buffer);

gConsolePresent = TRUE;
}


Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiSimpleTextInProtocolGuid, NULL, &NoHandles, &Buffer);
if (!EFI_ERROR (Status)) {
// Use the first SimpleTextIn we find and update the EFI System Table
gST->ConsoleInHandle = Buffer[0];
Status = gBS->HandleProtocol (Buffer[0], &gEfiSimpleTextInProtocolGuid, (VOID **)&gST->ConIn);
ASSERT_EFI_ERROR (Status);

FreePool (Buffer);
}

//
// We now have EFI Consoles up and running. Print () will work now. DEBUG () and ASSERT () worked
// prior to this point as they were configured to use a more primative output scheme.
//

//
//Perform Connect
//
HandleCount = 0;
while (1) {
OldHandleCount = HandleCount;
Status = gBS->LocateHandleBuffer (
               AllHandles,


               NULL,


               NULL,


               &HandleCount,


               &HandleBuffer


               );


if (EFI_ERROR (Status)) {
 break;


}

if (HandleCount == OldHandleCount) {
 break;


}

for (Index = 0; Index < HandleCount; Index++) {
 gBS->ConnectController (HandleBuffer[Index], NULL, NULL, TRUE);


}
}

EfiSignalEventReadyToBoot ();

//Locate handles for SimpleFileSystem protocol
Status = gBS->LocateHandleBuffer (
             ByProtocol,


             &gEfiSimpleFileSystemProtocolGuid,


             NULL,


             &HandleCount,


             &HandleBuffer


             );


if (!EFI_ERROR(Status)) {
for (Index = 0; Index < HandleCount; Index++) {
 //Get the device path


 FileSystemDevicePath = DevicePathFromHandle(HandleBuffer[Index]);


 if (FileSystemDevicePath == NULL) {


   continue;


 }



 //Check if UsbIo is on any handles in the device path.


 Status = gBS->LocateDevicePath(&gEfiUsbIoProtocolGuid, &FileSystemDevicePath, &UsbDeviceHandle);


 if (EFI_ERROR(Status)) {


   continue;


 }



 //Check if Usb stick has a magic EBL file.


 LoadImageDevicePath = FileDevicePath(HandleBuffer[Index], L"Ebl.efi");


 Status = gBS->LoadImage (TRUE, gImageHandle, LoadImageDevicePath, NULL, 0, &ImageHandle);


 if (EFI_ERROR(Status)) {


   continue;


 }



 //Boot to Shell on USB stick.


 Status = gBS->StartImage (ImageHandle, NULL, NULL);


 if (EFI_ERROR(Status)) {


   continue;


 }


}
}

//
// Normal UEFI behavior is to process Globally Defined Variables as defined in Chapter 3
// (Boot Manager) of the UEFI specification. For this embedded system we don't do this.
//

//
// Search all the FVs for an application with a UI Section of Ebl. A .FDF file can be used
// to control the names of UI sections in an FV.
//
Status = FindApplicationMatchingUiSection (L"Ebl", &FvHandle, &NameGuid);
if (!EFI_ERROR (Status)) {

//Boot to Shell.
Status = LoadPeCoffSectionFromFv (FvHandle, &NameGuid);

if (EFI_ERROR(Status)) {
 DEBUG((EFI_D_ERROR, "Boot from Shell failed. Status: %r\n", Status));


}
}

//
// EFI does not define the behaviour if all boot attemps fail and the last one returns.
// So we make a policy choice to reset the system since this BDS does not have a UI.
//
gRT->ResetSystem (EfiResetShutdown, Status, 0, NULL);

return ;

-}




-EFI_STATUS
-EFIAPI
-BdsInitialize (

IN EFI_HANDLE                            ImageHandle,
IN EFI_SYSTEM_TABLE                      *SystemTable
)

-{

EFI_STATUS  Status;

//
// Install protocol interface
//
Status = gBS->InstallMultipleProtocolInterfaces (
             &ImageHandle,


             &gEfiBdsArchProtocolGuid, &gBdsProtocol,


             NULL


             );


ASSERT_EFI_ERROR (Status);

return Status;

-}




diff --git a/Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.h b/Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.h
deleted file mode 100644
index 646f7b276d45..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Bds/BdsEntry.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#ifndef __BDS_ENTRY_H__
-#define __BDS_ENTRY_H__



-#include <PiDxe.h>
-#include <Library/BaseLib.h>
-#include <Library/DebugLib.h>
-#include <Library/PrintLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/DxeServicesTableLib.h>
-#include <Library/UefiRuntimeServicesTableLib.h>
-#include <Library/HobLib.h>
-#include <Library/DevicePathLib.h>
-#include <Library/PcdLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/PrintLib.h>
-#include <Library/PerformanceLib.h>



-#include <Protocol/Bds.h>
-#include <Protocol/SerialIo.h>
-#include <Protocol/FirmwareVolume2.h>
-#include <Protocol/SimpleTextIn.h>
-#include <Protocol/SimpleTextOut.h>
-#include <Protocol/EmbeddedDevice.h>
-#include <Protocol/DevicePath.h>
-#include <Protocol/SimpleFileSystem.h>
-#include <Protocol/UsbIo.h>




-EFI_STATUS
-LoadPeCoffSectionFromFv (

IN  EFI_HANDLE   FvHandle,
IN  EFI_GUID     *NameGuid
);


-EFI_STATUS
-FindApplicationMatchingUiSection (

IN  CHAR16      *UiString,
OUT EFI_HANDLE  *FvHandle,
OUT EFI_GUID    *NameGuid
);


-VOID
-EFIAPI
-BdsEntry (

IN EFI_BDS_ARCH_PROTOCOL  *This
);


-#endif



diff --git a/Platforms/TexasInstruments/BeagleBoard/Bds/FirmwareVolume.c b/Platforms/TexasInstruments/BeagleBoard/Bds/FirmwareVolume.c
deleted file mode 100644
index 31e1c5100eff..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Bds/FirmwareVolume.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/** @file

The entry of the embedded BDS. This BDS does not follow the Boot Manager requirements
of the UEFI specification as it is designed to implement an embedded systmes
propriatary boot scheme.

This template assume a DXE driver produces a SerialIo protocol not using the EFI
driver module and it will attempt to connect a console on top of this.


Copyright (c) 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include "BdsEntry.h"




-EFI_STATUS
-FindApplicationMatchingUiSection (

IN  CHAR16      *UiString,
OUT EFI_HANDLE  *FvHandle,
OUT EFI_GUID    *NameGuid
)

-{

EFI_STATUS                    Status;
EFI_STATUS                    NextStatus;
UINTN                         NoHandles;
EFI_HANDLE                    *Buffer;
UINTN                         Index;
EFI_FV_FILETYPE               FileType;
EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv;
VOID                          *Key;
EFI_FV_FILE_ATTRIBUTES        Attributes;
UINTN                         Size;
UINTN                         UiStringLen;
CHAR16                        *UiSection;
UINT32                        Authentication;


UiStringLen = 0;
if (UiString != NULL) {
DEBUG ((DEBUG_ERROR, "UiString %s\n", UiString));
UiStringLen = StrLen (UiString);
}

Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiFirmwareVolume2ProtocolGuid, NULL, &NoHandles, &Buffer);
if (!EFI_ERROR (Status)) {
for (Index = 0; Index < NoHandles; Index++) {
 Status = gBS->HandleProtocol (Buffer[Index], &gEfiFirmwareVolume2ProtocolGuid, (VOID **)&Fv);


 if (!EFI_ERROR (Status)) {


   Key = AllocatePool (Fv->KeySize);


   ASSERT (Key != NULL);


   ZeroMem (Key, Fv->KeySize);



   FileType = EFI_FV_FILETYPE_APPLICATION;



   do {


     NextStatus = Fv->GetNextFile (Fv, Key, &FileType, NameGuid, &Attributes, &Size);


     if (!EFI_ERROR (NextStatus)) {


       if (UiString == NULL) {


         //


         // If UiString is NULL match first application we find.


         //


         *FvHandle = Buffer[Index];


         FreePool (Key);


         return Status;


       }



       UiSection = NULL;


       Status = Fv->ReadSection (


                     Fv,


                     NameGuid,


                     EFI_SECTION_USER_INTERFACE,


                     0,


                     (VOID **)&UiSection,


                     &Size,


                     &Authentication


                     );


       if (!EFI_ERROR (Status)) {


         if (StrnCmp (UiString, UiSection, UiStringLen) == 0) {


           //


           // We found a UiString match.


           //


           *FvHandle = Buffer[Index];


           FreePool (Key);


           FreePool (UiSection);


           return Status;


         }


         FreePool (UiSection);


       }


     }


   } while (!EFI_ERROR (NextStatus));



   FreePool (Key);


 }


}

FreePool (Buffer);
}

return EFI_NOT_FOUND;

-}




-EFI_DEVICE_PATH *
-FvFileDevicePath (

IN  EFI_HANDLE   FvHandle,
IN  EFI_GUID     *NameGuid
)

-{

EFI_DEVICE_PATH_PROTOCOL          *DevicePath;
MEDIA_FW_VOL_FILEPATH_DEVICE_PATH NewNode;

DevicePath = DevicePathFromHandle (FvHandle);

EfiInitializeFwVolDevicepathNode (&NewNode, NameGuid);

return AppendDevicePathNode (DevicePath, (EFI_DEVICE_PATH_PROTOCOL *)&NewNode);

-}





-EFI_STATUS
-LoadPeCoffSectionFromFv (

IN  EFI_HANDLE   FvHandle,
IN  EFI_GUID     *NameGuid
)

-{

EFI_STATUS                    Status;
EFI_DEVICE_PATH_PROTOCOL      *DevicePath;
EFI_HANDLE                    ImageHandle;

DevicePath = FvFileDevicePath (FvHandle, NameGuid);

Status = gBS->LoadImage (TRUE, gImageHandle, DevicePath, NULL, 0, &ImageHandle);
if (!EFI_ERROR (Status)) {
PERF_END (NULL, "BDS", NULL, 0);
Status = gBS->StartImage (ImageHandle, NULL, NULL);
}

return Status;

-}



diff --git a/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dec b/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dec
deleted file mode 100644
index 496442a627e8..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dec
+++ /dev/null
@@ -1,36 +0,0 @@
-#/** @file
-# Beagle board package.
-#
-# Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
-#
-#    This program and the accompanying materials are licensed and made available under
-#    the terms and conditions of the BSD License which accompanies this distribution.
-#    The full text of the license may be found at
-#    http://opensource.org/licenses/bsd-license.php
-#
-#    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

DEC_SPECIFICATION              = 0x00010005
PACKAGE_NAME                   = BeagleBoardPkg
PACKAGE_GUID                   = 6eba6648-d853-4eb3-9761-528b82d5ab04
PACKAGE_VERSION                = 0.1


-################################################################################
-#
-# Include Section - list of Include Paths that are provided by this package.
-#                   Comments are used for Keywords and Module Types.
-#
-# Supported Module Types:
-#  BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION
-#
-################################################################################
-[Includes.common]

Include                        # Root include for the package


-[Guids.common]

gBeagleBoardTokenSpaceGuid    =  { 0x6834fe45, 0x4aee, 0x4fc6, { 0xbc, 0xb5, 0xff, 0x45, 0xb7, 0xa8, 0x71, 0xe2 } }


diff --git a/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dsc b/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dsc
deleted file mode 100644
index f04aa983d307..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dsc
+++ /dev/null
@@ -1,481 +0,0 @@
-#/** @file
-# Beagle board package.
-#
-# Copyright (c) 2009 - 2010, Apple Inc. All rights reserved.<BR>
-#
-#    This program and the accompanying materials
-#    are licensed and made available under the terms and conditions of the BSD License
-#    which accompanies this distribution. The full text of the license may be found at
-#    http://opensource.org/licenses/bsd-license.php
-#
-#    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-################################################################################
-#
-# Defines Section - statements that will be processed to create a Makefile.
-#
-################################################################################
-[Defines]

PLATFORM_NAME                  = BeagleBoardPkg
PLATFORM_GUID                  = 91fa6c28-33df-46ac-aee6-292d6811ea31
PLATFORM_VERSION               = 0.1
DSC_SPECIFICATION              = 0x00010005
OUTPUT_DIRECTORY               = Build/BeagleBoard
SUPPORTED_ARCHITECTURES        = ARM
BUILD_TARGETS                  = DEBUG|RELEASE
SKUID_IDENTIFIER               = DEFAULT
FLASH_DEFINITION               = OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.fdf



-[LibraryClasses.common]

ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
ArmPlatformLib|OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardLib.inf
ArmCpuLib|ArmPkg/Drivers/ArmCpuLib/ArmCortexA8Lib/ArmCortexA8Lib.inf
ArmPlatformStackLib|ArmPlatformPkg/Library/ArmPlatformStackLib/ArmPlatformStackLib.inf
ArmSmcLib|ArmPkg/Library/ArmSmcLib/ArmSmcLib.inf

HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
UefiHiiServicesLib|MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServicesLib.inf


-!if $(TARGET) == RELEASE

DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf
UncachedMemoryAllocationLib|ArmPkg/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf

-!else

DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
UncachedMemoryAllocationLib|ArmPkg/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf

-#  UncachedMemoryAllocationLib|ArmPkg/Library/DebugUncachedMemoryAllocationLib/DebugUncachedMemoryAllocationLib.inf
-!endif

DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf

MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf

BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf

EfiResetSystemLib|OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.inf

PciLib|MdePkg/Library/BasePciLibCf8/BasePciLibCf8.inf
PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf
PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf

EfiFileLib|EmbeddedPkg/Library/EfiFileLib/EfiFileLib.inf

# These libraries are used by the dynamic EFI Shell commands
ShellLib|ShellPkg/Library/UefiShellLib/UefiShellLib.inf
FileHandleLib|MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf
SortLib|MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf

PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf

#
# Uncomment (and comment out the next line) For RealView Debugger. The Standard IO window
# in the debugger will show load and unload commands for symbols. You can cut and paste this
# into the command window to load symbols. We should be able to use a script to do this, but
# the version of RVD I have does not support scipts accessing system memory.
#

-#  PeCoffExtraActionLib|ArmPkg/Library/RvdPeCoffExtraActionLib/RvdPeCoffExtraActionLib.inf

PeCoffExtraActionLib|ArmPkg/Library/DebugPeCoffExtraActionLib/DebugPeCoffExtraActionLib.inf

-#  PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf



CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLib.inf
CpuExceptionHandlerLib|ArmPkg/Library/ArmExceptionLib/ArmExceptionLib.inf
PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf

SerialPortLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/SerialPortLib/SerialPortLib.inf
SemihostLib|ArmPkg/Library/SemihostLib/SemihostLib.inf

RealTimeClockLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/RealTimeClockLib/RealTimeClockLib.inf

IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf

MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
UefiLib|MdePkg/Library/UefiLib/UefiLib.inf
HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf
DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf

DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf
UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf
UefiApplicationEntryPoint|MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf


-#
-# Assume everything is fixed at build
-#

PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf

UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf

UefiUsbLib|MdePkg/Library/UefiUsbLib/UefiUsbLib.inf

CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf

TimerLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/Omap35xxTimerLib/Omap35xxTimerLib.inf
OmapLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/OmapLib/OmapLib.inf
OmapDmaLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/OmapDmaLib/OmapDmaLib.inf
DebugAgentTimerLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/DebugAgentTimerLib/DebugAgentTimerLib.inf

GdbSerialLib|OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Library/GdbSerialLib/GdbSerialLib.inf
ArmDisassemblerLib|ArmPkg/Library/ArmDisassemblerLib/ArmDisassemblerLib.inf
DebugAgentLib|MdeModulePkg/Library/DebugAgentLibNull/DebugAgentLibNull.inf
DmaLib|ArmPkg/Library/ArmDmaLib/ArmDmaLib.inf

NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf
BdsLib|ArmPkg/Library/BdsLib/BdsLib.inf
FdtLib|EmbeddedPkg/Library/FdtLib/FdtLib.inf


-[LibraryClasses.common.SEC]

PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
ReportStatusCodeLib|IntelFrameworkModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf
UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf

PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf

HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf
MemoryInitPeiLib|ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.inf

# 1/123 faster than Stm or Vstm version
BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf

# Uncomment to turn on GDB stub in SEC.
#DebugAgentLib|EmbeddedPkg/Library/GdbDebugAgent/GdbDebugAgent.inf


-[LibraryClasses.common.PEI_CORE]

PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
ReportStatusCodeLib|IntelFrameworkModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf


-[LibraryClasses.common.DXE_CORE]

HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf
MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf
DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf
ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf

-#  PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf

PeCoffLib|EmbeddedPkg/Library/DxeHobPeCoffLib/DxeHobPeCoffLib.inf

PerformanceLib|MdeModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.inf



-[LibraryClasses.common.DXE_DRIVER]

ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf
PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf


-[LibraryClasses.common.UEFI_APPLICATION]

ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf
PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf


-[LibraryClasses.common.UEFI_DRIVER]

ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf
ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf


-[LibraryClasses.common.DXE_RUNTIME_DRIVER]

HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf

-#  PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf

PeCoffLib|EmbeddedPkg/Library/DxeHobPeCoffLib/DxeHobPeCoffLib.inf



-[LibraryClasses.ARM]

#
# It is not possible to prevent the ARM compiler for generic intrinsic functions.
# This library provides the instrinsic functions generate by a given compiler.
# [LibraryClasses.ARM] and NULL mean link this library into all ARM images.
#
NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf

# Add support for GCC stack protector
NULL|MdePkg/Library/BaseStackCheckLib/BaseStackCheckLib.inf


-[BuildOptions]

XCODE:*_*_ARM_PLATFORM_FLAGS == -arch armv7

GCC:*_*_ARM_PLATFORM_FLAGS == -march=armv7-a

RVCT:*_*_ARM_PLATFORM_FLAGS == --cpu Cortex-A8


-################################################################################
-#
-# Pcd Section - list of all EDK II PCD Entries defined by this Platform
-#
-################################################################################



-[PcdsFeatureFlag.common]

gEfiMdePkgTokenSpaceGuid.PcdComponentNameDisable|TRUE
gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnosticsDisable|TRUE
gEfiMdePkgTokenSpaceGuid.PcdComponentName2Disable|TRUE
gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnostics2Disable|TRUE

#
# Control what commands are supported from the UI
# Turn these on and off to add features or save size
#
gEmbeddedTokenSpaceGuid.PcdEmbeddedMacBoot|TRUE
gEmbeddedTokenSpaceGuid.PcdEmbeddedDirCmd|TRUE
gEmbeddedTokenSpaceGuid.PcdEmbeddedHobCmd|TRUE
gEmbeddedTokenSpaceGuid.PcdEmbeddedHwDebugCmd|TRUE
gEmbeddedTokenSpaceGuid.PcdEmbeddedPciDebugCmd|TRUE
gEmbeddedTokenSpaceGuid.PcdEmbeddedIoEnable|FALSE
gEmbeddedTokenSpaceGuid.PcdEmbeddedScriptCmd|FALSE

gEmbeddedTokenSpaceGuid.PcdCacheEnable|TRUE

# Use the Vector Table location in CpuDxe. We will not copy the Vector Table at PcdCpuVectorBaseAddress
gArmTokenSpaceGuid.PcdRelocateVectorTable|FALSE

gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob|TRUE
gArmTokenSpaceGuid.PcdCpuDxeProduceDebugSupport|FALSE

gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|TRUE

## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
#  It could be set FALSE to save size.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE


-[PcdsFixedAtBuild.common]

gArmPlatformTokenSpaceGuid.PcdFirmwareVendor|"Beagle Board"

gEmbeddedTokenSpaceGuid.PcdEmbeddedPrompt|"BeagleEdk2"
gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength|1000000
gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength|1000000
gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000
gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout|10000000
gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue|0xAF
gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|1
gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320


-# DEBUG_ASSERT_ENABLED       0x01
-# DEBUG_PRINT_ENABLED        0x02
-# DEBUG_CODE_ENABLED         0x04
-# CLEAR_MEMORY_ENABLED       0x08
-# ASSERT_BREAKPOINT_ENABLED  0x10
-# ASSERT_DEADLOOP_ENABLED    0x20
-!if $(TARGET) == RELEASE

gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x21

-!else

gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f

-!endif



-#  DEBUG_INIT      0x00000001  // Initialization
-#  DEBUG_WARN      0x00000002  // Warnings
-#  DEBUG_LOAD      0x00000004  // Load events
-#  DEBUG_FS        0x00000008  // EFI File system
-#  DEBUG_POOL      0x00000010  // Alloc & Free's
-#  DEBUG_PAGE      0x00000020  // Alloc & Free's
-#  DEBUG_INFO      0x00000040  // Verbose
-#  DEBUG_DISPATCH  0x00000080  // PEI/DXE Dispatchers
-#  DEBUG_VARIABLE  0x00000100  // Variable
-#  DEBUG_BM        0x00000400  // Boot Manager
-#  DEBUG_BLKIO     0x00001000  // BlkIo Driver
-#  DEBUG_NET       0x00004000  // SNI Driver
-#  DEBUG_UNDI      0x00010000  // UNDI Driver
-#  DEBUG_LOADFILE  0x00020000  // UNDI Driver
-#  DEBUG_EVENT     0x00080000  // Event messages
-#  DEBUG_ERROR     0x80000000  // Error

gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000000F

gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07

gEmbeddedTokenSpaceGuid.PcdEmbeddedAutomaticBootCommand|""
gEmbeddedTokenSpaceGuid.PcdEmbeddedDefaultTextColor|0x07
gEmbeddedTokenSpaceGuid.PcdEmbeddedMemVariableStoreSize|0x10000


-#
-# Optional feature to help prevent EFI memory map fragments
-# Turned on and off via: PcdPrePiProduceMemoryTypeInformationHob
-# Values are in EFI Pages (4K). DXE Core will make sure that
-# at least this much of each type of memory can be allocated
-# from a single memory range. This way you only end up with
-# maximum of two fragements for each type in the memory map
-# (the memory used, and the free memory that was prereserved
-# but not used).
-#

gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS|0
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType|0
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|80
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|40
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode|400
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesData|3000
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderCode|10
gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderData|0



-#
-# Beagle board Specific PCDs
-#

gArmTokenSpaceGuid.PcdVFPEnabled|1

gArmTokenSpaceGuid.PcdSystemMemoryBase|0x80000000
gArmTokenSpaceGuid.PcdSystemMemorySize|0x08000000

# Size of the region used by UEFI in permanent memory (Reserved 16MB)
gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x01000000

# Size of the region reserved for fixed address allocations (Reserved 32MB)
gArmTokenSpaceGuid.PcdArmLinuxKernelMaxOffset|0x02000000

gArmTokenSpaceGuid.PcdCpuVectorBaseAddress|0x80008000
gArmTokenSpaceGuid.PcdCpuResetAddress|0x80008000

gEmbeddedTokenSpaceGuid.PcdTimerPeriod|100000
gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterPeriodInNanoseconds|77
gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterFrequencyInHz|13000000

# We want to use the Shell Libraries but don't want it to initialise
# automatically. We initialise the libraries when the command is called by the
# Shell.
gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE

#
# ARM Pcds
#
gArmTokenSpaceGuid.PcdArmUncachedMemoryMask|0x0000000040000000

gArmPlatformTokenSpaceGuid.PcdDefaultBootDescription|L"Linux from SD"
gArmPlatformTokenSpaceGuid.PcdDefaultBootDevicePath|L"VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/Image"
gArmPlatformTokenSpaceGuid.PcdDefaultBootArgument|"console=tty0 console=ttyS2,115200n8 root=UUID=a4af765b-c2b5-48f4-9564-7a4e9104c4f6 rootwait ro earlyprintk"
gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|10

gArmPlatformTokenSpaceGuid.PcdDefaultConOutPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenPcAnsi();VenHw(E68088EF-D1A4-4336-C1DB-4D3A204730A6)"
gArmPlatformTokenSpaceGuid.PcdDefaultConInPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenPcAnsi()"


-################################################################################
-#
-# Components Section - list of all EDK II Modules needed by this Platform
-#
-################################################################################
-[Components.common]


#
# SEC
#
ArmPlatformPkg/PrePi/PeiUniCore.inf

#
# DXE
#
MdeModulePkg/Core/Dxe/DxeMain.inf {
<LibraryClasses>

 PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf


 NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf


 NULL|EmbeddedPkg/Library/LzmaHobCustomDecompressLib/LzmaHobCustomDecompressLib.inf


}

ArmPkg/Drivers/CpuDxe/CpuDxe.inf

MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf

MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf

-#
-# This version uses semi-hosting console
-#  EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf {
-#    <LibraryClasses>
-#      SerialPortLib|ArmPkg/Library/SemiHostingSerialPortLib/SemiHostingSerialPortLib.inf
-#  }


EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf

#
# Semi-hosting filesystem
#
ArmPkg/Filesystem/SemihostFs/SemihostFs.inf

#
# FAT filesystem + GPT/MBR partitioning
#
MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf

#
# USB
#
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.inf

MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf {
<PcdsFixedAtBuild>

 gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x800fffff


}

MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf

#
# Nand Flash
#
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Flash/Flash.inf

#
# MMC/SD
#
EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.inf

#
# I2C
#
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf

#
# SoC Drivers
#
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf

#
# Power IC
#
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf

#
# Bds
#
MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
ArmPlatformPkg/Bds/Bds.inf

# Legacy Linux Loader
ArmPkg/Application/LinuxLoader/LinuxLoader.inf

#
# Example Application
#
MdeModulePkg/Application/HelloWorld/HelloWorld.inf


diff --git a/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.fdf b/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.fdf
deleted file mode 100644
index 9728efd43b76..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.fdf
+++ /dev/null
@@ -1,310 +0,0 @@
-# FLASH layout file for Beagle board.
-#
-# Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
-#
-#    This program and the accompanying materials
-#    are licensed and made available under the terms and conditions of the BSD License
-#    which accompanies this distribution. The full text of the license may be found at
-#    http://opensource.org/licenses/bsd-license.php
-#
-#    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#



-################################################################################
-#
-# FD Section
-# The [FD] Section is made up of the definition statements and a
-# description of what goes into  the Flash Device Image.  Each FD section
-# defines one flash "device" image.  A flash device image may be one of
-# the following: Removable media bootable image (like a boot floppy
-# image,) an Option ROM image (that would be "flashed" into an add-in
-# card,) a System "Flash"  image (that would be burned into a system's
-# flash) or an Update ("Capsule") image that will be used to update and
-# existing system flash.
-#
-################################################################################




-[FD.BeagleBoard_EFI]
-BaseAddress   = 0x80008000|gArmTokenSpaceGuid.PcdFdBaseAddress  #The base address of the FLASH Device.
-Size          = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize         #The size in bytes of the FLASH Device
-ErasePolarity = 1
-BlockSize     = 0x1
-NumBlocks     = 0xB0000



-################################################################################
-#
-# Following are lists of FD Region layout which correspond to the locations of different
-# images within the flash device.
-#
-# Regions must be defined in ascending order and may not overlap.
-#
-# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
-# the pipe "|" character, followed by the size of the region, also in hex with the leading
-# "0x" characters. Like:
-# Offset|Size
-# PcdOffsetCName|PcdSizeCName
-# RegionType <FV, DATA, or FILE>
-#
-################################################################################
-0x00000000|0x000B0000
-gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
-FV = FVMAIN_COMPACT



-################################################################################
-#
-# FV Section
-#
-# [FV] section is used to define what components or modules are placed within a flash
-# device file.  This section also defines order the components and modules are positioned
-# within the image.  The [FV] section consists of define statements, set statements and
-# module statements.
-#
-################################################################################



-[FV.FvMain]
-BlockSize          = 0x1
-NumBlocks          = 0         # This FV gets compressed so make it just big enough
-FvAlignment        = 8         # FV alignment and FV attributes setting.
-ERASE_POLARITY     = 1
-MEMORY_MAPPED      = TRUE
-STICKY_WRITE       = TRUE
-LOCK_CAP           = TRUE
-LOCK_STATUS        = TRUE
-WRITE_DISABLED_CAP = TRUE
-WRITE_ENABLED_CAP  = TRUE
-WRITE_STATUS       = TRUE
-WRITE_LOCK_CAP     = TRUE
-WRITE_LOCK_STATUS  = TRUE
-READ_DISABLED_CAP  = TRUE
-READ_ENABLED_CAP   = TRUE
-READ_STATUS        = TRUE
-READ_LOCK_CAP      = TRUE
-READ_LOCK_STATUS   = TRUE
-FvNameGuid         = d0dd3e90-343d-4cb3-8f69-772214989282


INF MdeModulePkg/Core/Dxe/DxeMain.inf

#
# PI DXE Drivers producing Architectural Protocols (EFI Services)
#
INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf

INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf

INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf

INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf


-!if $(TARGET) == RELEASE

#
# Semi-hosting filesystem
#
INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf

-!endif


#
# Nand Flash
#
INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Flash/Flash.inf

#
# MMC/SD
#
INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/MmcHostDxe/MmcHostDxe.inf

#
# I2C
#
INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/SmbusDxe/Smbus.inf

#
# SoC Drivers
#
INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Gpio/Gpio.inf
INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/InterruptDxe/InterruptDxe.inf
INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/TimerDxe/TimerDxe.inf
INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf

#
# Power IC
#
INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/TPS65950Dxe/TPS65950.inf

#
# FAT filesystem + GPT/MBR partitioning
#
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF FatBinPkg/EnhancedFatDxe/Fat.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf

#
# USB Support
#

INF OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/PciEmulation/PciEmulation.inf

INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf

#
# UEFI application (Shell Embedded Boot Loader)
#
INF ShellBinPkg/UefiShell/UefiShell.inf

#
# Bds
#
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF ArmPlatformPkg/Bds/Bds.inf

# Legacy Linux Loader
INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf



-[FV.FVMAIN_COMPACT]
-FvAlignment        = 8
-ERASE_POLARITY     = 1
-MEMORY_MAPPED      = TRUE
-STICKY_WRITE       = TRUE
-LOCK_CAP           = TRUE
-LOCK_STATUS        = TRUE
-WRITE_DISABLED_CAP = TRUE
-WRITE_ENABLED_CAP  = TRUE
-WRITE_STATUS       = TRUE
-WRITE_LOCK_CAP     = TRUE
-WRITE_LOCK_STATUS  = TRUE
-READ_DISABLED_CAP  = TRUE
-READ_ENABLED_CAP   = TRUE
-READ_STATUS        = TRUE
-READ_LOCK_CAP      = TRUE
-READ_LOCK_STATUS   = TRUE


INF ArmPlatformPkg/PrePi/PeiUniCore.inf

FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 SECTION FV_IMAGE = FVMAIN


}
}



-################################################################################
-#
-# Rules are use with the [FV] section's module INF type to define
-# how an FFS file is created for a given INF file. The following Rule are the default
-# rules for the different module type. User can add the customized rules to define the
-# content of the FFS file.
-#
-################################################################################




-############################################################################
-# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
-############################################################################
-#
-#[Rule.Common.DXE_DRIVER]
-#  FILE DRIVER = $(NAMED_GUID) {
-#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
-#    COMPRESS PI_STD {
-#      GUIDED {
-#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
-#        UI       STRING="$(MODULE_NAME)" Optional
-#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
-#      }
-#    }
-#  }
-#
-############################################################################



-[Rule.Common.SEC]

FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
}


-[Rule.Common.PEI_CORE]

FILE PEI_CORE = $(NAMED_GUID) {
TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
UI     STRING ="$(MODULE_NAME)" Optional
}


-[Rule.Common.PEIM]

FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex


PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi


UI       STRING="$(MODULE_NAME)" Optional


}


-[Rule.Common.PEIM.TIANOCOMPRESSED]

FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi


 UI        STRING="$(MODULE_NAME)" Optional


}
}


-[Rule.Common.DXE_CORE]

FILE DXE_CORE = $(NAMED_GUID) {
PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
UI       STRING="$(MODULE_NAME)" Optional
}



-[Rule.Common.UEFI_DRIVER]

FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
UI           STRING="$(MODULE_NAME)" Optional
}


-[Rule.Common.DXE_DRIVER]

FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
UI           STRING="$(MODULE_NAME)" Optional
}


-[Rule.Common.DXE_RUNTIME_DRIVER]

FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
UI           STRING="$(MODULE_NAME)" Optional
}


-[Rule.Common.UEFI_APPLICATION]

FILE APPLICATION = $(NAMED_GUID) {
UI     STRING ="$(MODULE_NAME)" Optional
PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
}


-[Rule.Common.UEFI_DRIVER.BINARY]

FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional      |.depex
PE32      PE32                    |.efi
UI        STRING="$(MODULE_NAME)" Optional
VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}


-[Rule.Common.UEFI_APPLICATION.BINARY]

FILE APPLICATION = $(NAMED_GUID) {
PE32      PE32                    |.efi
UI        STRING="$(MODULE_NAME)" Optional
VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}

diff --git a/Platforms/TexasInstruments/BeagleBoard/ConfigurationHeader.dat b/Platforms/TexasInstruments/BeagleBoard/ConfigurationHeader.dat
deleted file mode 100644
index 5f6897e306d8..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/ConfigurationHeader.dat
+++ /dev/null
@@ -1,41 +0,0 @@
-PRM_CLKSRC_CTRL=0x00000080
-PRM_CLKSEL=0x00000003
-CM_CLKSEL1_EMU=0x03020A50
-CM_CLKSEL_CORE=0x0000030A
-CM_CLKSEL_WKUP=0x00000015
-CM_CLKEN_PLL_DPLL3=0x00370037
-CM_AUTOIDLE_PLL_DPLL3=0x00000000
-CM_CLKSEL1_PLL=0x094C0C00
-CM_CLKEN_PLL_DPLL4=0x00370037
-CM_AUTOIDLE_PLL_DPLL4=0x00000000
-CM_CLKSEL2_PLL=0x0001B00C
-CM_CLKSEL3_PLL=0x00000009
-CM_CLKEN_PLL_MPU=0x00000037
-CM_AUTOIDLE_PLL_MPU=0x00000000
-CM_CLKSEL1_PLL_MPU=0x0011F40C
-CM_CLKSEL2_PLL_MPU=0x00000001
-CM_CLKSTCTRL_MPU=0x00000000
-SDRC_SYSCONFIG_LSB=0x0000
-SDRC_CS_CFG_LSB=0x0001
-SDRC_SHARING_LSB=0x0100
-SDRC_ERR_TYPE_LSB=0x0000
-SDRC_DLLA_CTRL=0x0000000A
-SDRC_POWER=0x00000081
-MEMORY_TYPE_CS0=0x0003
-SDRC_MCFG_0=0x02D04011
-SDRC_MR_0_LSB=0x0032
-SDRC_EMR1_0_LSB=0x0000
-SDRC_EMR2_0_LSB=0x0000
-SDRC_EMR3_0_LSB=0x0000
-SDRC_ACTIM_CTRLA_0=0xBA9DC4C6
-SDRC_ACTIM_CTRLB_0=0x00012522
-SDRC_RFRCTRL_0=0x0004E201
-MEMORY_TYPE_CS1=0x0003
-SDRC_MCFG_1=0x02D04011
-SDRC_MR_1_LSB=0x0032
-SDRC_EMR1_1_LSB=0x0000
-SDRC_EMR2_1_LSB=0x0000
-SDRC_EMR3_1_LSB=0x0000
-SDRC_ACTIM_CTRLA_1=0xBA9DC4C6
-SDRC_ACTIM_CTRLB_1=0x00012522
-SDRC_RFRCTRL_1=0x0004E201
diff --git a/Platforms/TexasInstruments/BeagleBoard/Contributions.txt b/Platforms/TexasInstruments/BeagleBoard/Contributions.txt
deleted file mode 100644
index f87cbd73c693..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Contributions.txt
+++ /dev/null
@@ -1,218 +0,0 @@



-======================
-= Code Contributions =



-To make a contribution to a TianoCore project, follow these steps.
-1. Create a change description in the format specified below to

use in the source control commit log.

-2. Your commit message must include your "Signed-off-by" signature,

and "Contributed-under" message.

-3. Your "Contributed-under" message explicitly states that the

contribution is made under the terms of the specified
contribution agreement.  Your "Contributed-under" message
must include the name of contribution agreement and version.
For example: Contributed-under: TianoCore Contribution Agreement 1.0
The "TianoCore Contribution Agreement" is included below in
this document.

-4. Submit your code to the TianoCore project using the process

that the project documents on its web page.  If the process is
not documented, then submit the code on development email list
for the project.

-5. It is preferred that contributions are submitted using the same

copyright license as the base project. When that is not possible,
then contributions using the following licenses can be accepted:

BSD (2-clause): http://opensource.org/licenses/BSD-2-Clause



BSD (3-clause): http://opensource.org/licenses/BSD-3-Clause



MIT: http://opensource.org/licenses/MIT



Python-2.0: http://opensource.org/licenses/Python-2.0



Zlib: http://opensource.org/licenses/Zlib



Contributions of code put into the public domain can also be
accepted.

Contributions using other licenses might be accepted, but further
review will be required.


-=====================================================
-= Change Description / Commit Message / Patch Email =



-Your change description should use the standard format for a
-commit message, and must include your "Signed-off-by" signature
-and the "Contributed-under" message.



-== Sample Change Description / Commit Message =



-=== Start of sample patch email message ===



-From: Contributor Name contributor@example.com
-Subject: [PATCH] CodeModule: Brief-single-line-summary



-Full-commit-message



-Contributed-under: TianoCore Contribution Agreement 1.0
-Signed-off-by: Contributor Name contributor@example.com



-An extra message for the patch email which will not be considered part
-of the commit message can be added here.



-Patch content inline or attached



-=== End of sample patch email message ===



-=== Notes for sample patch email ===



-* The first line of commit message is taken from the email's subject

line following [PATCH]. The remaining portion of the commit message
is the email's content until the '---' line.

-* git format-patch is one way to create this format



-=== Definitions for sample patch email ===



-* "CodeModule" is a short idenfier for the affected code.  For

example MdePkg, or MdeModulePkg UsbBusDxe.

-* "Brief-single-line-summary" is a short summary of the change.
-* The entire first line should be less than ~70 characters.
-* "Full-commit-message" a verbose multiple line comment describing

the change.  Each line should be less than ~70 characters.

-* "Contributed-under" explicitely states that the contribution is

made under the terms of the contribtion agreement.  This
agreement is included below in this document.

-* "Signed-off-by" is the contributor's signature identifying them

by their real/legal name and their email address.


-========================================
-= TianoCore Contribution Agreement 1.0 =



-INTEL CORPORATION ("INTEL") MAKES AVAILABLE SOFTWARE, DOCUMENTATION,
-INFORMATION AND/OR OTHER MATERIALS FOR USE IN THE TIANOCORE OPEN SOURCE
-PROJECT (COLLECTIVELY "CONTENT"). USE OF THE CONTENT IS GOVERNED BY THE
-TERMS AND CONDITIONS OF THIS AGREEMENT BETWEEN YOU AND INTEL AND/OR THE
-TERMS AND CONDITIONS OF LICENSE AGREEMENTS OR NOTICES INDICATED OR
-REFERENCED BELOW. BY USING THE CONTENT, YOU AGREE THAT YOUR USE OF THE
-CONTENT IS GOVERNED BY THIS AGREEMENT AND/OR THE TERMS AND CONDITIONS
-OF ANY APPLICABLE LICENSE AGREEMENTS OR NOTICES INDICATED OR REFERENCED
-BELOW. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS
-AGREEMENT AND THE TERMS AND CONDITIONS OF ANY APPLICABLE LICENSE
-AGREEMENTS OR NOTICES INDICATED OR REFERENCED BELOW, THEN YOU MAY NOT
-USE THE CONTENT.



-Unless otherwise indicated, all Content made available on the TianoCore
-site is provided to you under the terms and conditions of the BSD
-License ("BSD"). A copy of the BSD License is available at
-http://opensource.org/licenses/bsd-license.php
-or when applicable, in the associated License.txt file.



-Certain other content may be made available under other licenses as
-indicated in or with such Content. (For example, in a License.txt file.)



-You accept and agree to the following terms and conditions for Your
-present and future Contributions submitted to TianoCore site. Except
-for the license granted to Intel hereunder, You reserve all right,
-title, and interest in and to Your Contributions.



-== SECTION 1: Definitions ==
-* "You" or "Contributor" shall mean the copyright owner or legal

entity authorized by the copyright owner that is making a
Contribution hereunder. All other entities that control, are
controlled by, or are under common control with that entity are
considered to be a single Contributor. For the purposes of this
definition, "control" means (i) the power, direct or indirect, to
cause the direction or management of such entity, whether by
contract or otherwise, or (ii) ownership of fifty percent (50%)
or more of the outstanding shares, or (iii) beneficial ownership
of such entity.

-* "Contribution" shall mean any original work of authorship,

including any modifications or additions to an existing work,
that is intentionally submitted by You to the TinaoCore site for
inclusion in, or documentation of, any of the Content. For the
purposes of this definition, "submitted" means any form of
electronic, verbal, or written communication sent to the
TianoCore site or its representatives, including but not limited
to communication on electronic mailing lists, source code
control systems, and issue tracking systems that are managed by,
or on behalf of, the TianoCore site for the purpose of
discussing and improving the Content, but excluding
communication that is conspicuously marked or otherwise
designated in writing by You as "Not a Contribution."


-== SECTION 2: License for Contributions ==
-* Contributor hereby agrees that redistribution and use of the

Contribution in source and binary forms, with or without
modification, are permitted provided that the following
conditions are met:

-** Redistributions of source code must retain the Contributor's

copyright notice, this list of conditions and the following
disclaimer.

-** Redistributions in binary form must reproduce the Contributor's

copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided
with the distribution.

-* Disclaimer. None of the names of Contributor, Intel, or the names

of their respective contributors may be used to endorse or
promote products derived from this software without specific
prior written permission.

-* Contributor grants a license (with the right to sublicense) under

claims of Contributor's patents that Contributor can license that
are infringed by the Contribution (as delivered by Contributor) to
make, use, distribute, sell, offer for sale, and import the
Contribution and derivative works thereof solely to the minimum
extent necessary for licensee to exercise the granted copyright
license; this patent license applies solely to those portions of
the Contribution that are unmodified. No hardware per se is
licensed.

-* EXCEPT AS EXPRESSLY SET FORTH IN SECTION 3 BELOW, THE

CONTRIBUTION IS PROVIDED BY THE CONTRIBUTOR "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
CONTRIBUTOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THE
CONTRIBUTION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.


-== SECTION 3: Representations ==
-* You represent that You are legally entitled to grant the above

license. If your employer(s) has rights to intellectual property
that You create that includes Your Contributions, You represent
that You have received permission to make Contributions on behalf
of that employer, that Your employer has waived such rights for
Your Contributions.

-* You represent that each of Your Contributions is Your original

creation (see Section 4 for submissions on behalf of others).
You represent that Your Contribution submissions include complete
details of any third-party license or other restriction
(including, but not limited to, related patents and trademarks)
of which You are personally aware and which are associated with
any part of Your Contributions.


-== SECTION 4: Third Party Contributions ==
-* Should You wish to submit work that is not Your original creation,

You may submit it to TianoCore site separately from any
Contribution, identifying the complete details of its source
and of any license or other restriction (including, but not
limited to, related patents, trademarks, and license agreements)
of which You are personally aware, and conspicuously marking the
work as "Submitted on behalf of a third-party: [named here]".


-== SECTION 5: Miscellaneous ==
-* Applicable Laws. Any claims arising under or relating to this

Agreement shall be governed by the internal substantive laws of
the State of Delaware or federal courts located in Delaware,
without regard to principles of conflict of laws.

-* Language. This Agreement is in the English language only, which

language shall be controlling in all respects, and all versions
of this Agreement in any other language shall be for accommodation
only and shall not be binding. All communications and notices made
or given pursuant to this Agreement, and all documentation and
support to be provided, unless otherwise noted, shall be in the
English language.


diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_boot_from_ram.inc b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_boot_from_ram.inc
deleted file mode 100644
index a4e96747f8d2..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_boot_from_ram.inc
+++ /dev/null
@@ -1,21 +0,0 @@
-//
-// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-//
-//  This program and the accompanying materials
-//  are licensed and made available under the terms and conditions of the BSD License
-//  which accompanies this distribution.  The full text of the license may be found at
-//  http://opensource.org/licenses/bsd-license.php
-//
-//  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-//  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-//
-error = continue
-unload
-error = abort



-setreg @CP15_CONTROL = 0x0005107E
-setreg @pc=0x80008208
-setreg @cpsr=0x000000D3
-dis/D
-readfile,raw,nowarn "ZZZZZZ/FV/BEAGLEBOARD_EFI.fd"=0x80008000



diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_convert_symbols.sh b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_convert_symbols.sh
deleted file mode 100755
index 67fdfe1efa14..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_convert_symbols.sh
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-#  
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http:#opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#




-IN=`/usr/bin/cygpath -u $1`
-OUT=`/usr/bin/cygpath -u $2`



-/usr/bin/sed -e "s//cygdrive/(.)/load/a/ni/np "\1:/g" \

        -e 's:\\:/:g' \


        -e "s/^/load\/a\/ni\/np \"/g" \


        -e "s/dll /dll\" \&/g" \


         $IN | /usr/bin/sort.exe --key=3 --output=$OUT




diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_dummy.axf b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_dummy.axf
deleted file mode 100755
index 17fabaa6cc649d520848f087954c0729043bf001..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001
literal 7984
zcmbVRZERcDd44ZRnY3iPwCQ$+=LU4Zwq6p;vganAF|?8`#nvjvj3mcis+FS1D~S!i
za7o%$YS@%3e<XnuV++;~#4x)Jn1AGlhIK=`)_{sSZLqnmfx2l2Yyc^Wm}0l6gBfc(
zY~`Nk-g~I)TV_dn;Hz_<^M0Q9ea|_U*JlQXp42o=RP)F-F;Q9M+J{Bn#N!d^*ezkq
zZ<Ey$AnTon@NAP;7G=%lWvRSamHC&dTK-QKyX4v0?}>DNK>lfYWA*T&CZW3b-hrU^
zUZwWhDv{UmNKd6My?CN{#w+z;czE%od}Z7JG@CD;?VhjoU@See1M48;>$%$S_PkQ1
z{HT|vEA@w(J8I}_TSV@9W&7I~&HnoGKJ*^|zF_v(m;bZbyt@W|YQ5XvCjSY{YrWT(
z>Ay&|&bc+gtBp<2`ONMOKc~I>So}w^;-D=9KTTUc@CG4!x7ob24s!-{`Kpx~b<-aC
zs5=C#LEnZCSL%V_Ttj585u(i?)`Br@P&fUavE{sSec2a&wXwDbwyI~VUinN-!n2J|
zkr&tX{6$sU{PJP~G=Fe*(ckm!x<B}>x>ugAd4rW%kMvc2uoEo9M%eV#To>`e{_Ssn
z0(Q7g)4yn?_DK!C!awP~)bK?w!M{o^AeS0z(f>8#rT9GgO3gctN3I}VRt(HOSgB)u
zW=y19sSR-rn3KzxE0-IJrUlE3zTgWD($pNs0ePXtL%ha;gBU+xOWASt%tc2K@d#IH
zt9p>bTbCB^X;}Z+>&vaYag7c+Gd{?<Cs?hk9FWd=;&stV?W<TzM-}V9*e?t9wZTfQ
zvj_NAr8W*5VdU+L;0gD_);RR%@s#n*SInGrEL3U>t6yJsJ{n}H-zQhi+;e>YyoeL~
zP(b&f+t;(*T7NI&KD+3RE+EgZBL02V4vE%K%a72ffV|r1kaG1e8T;}1+AAVmzTm5n
zy@Kay<Yw-J9IpZoYfi`?ELY9?LG1|Y<(Gn*yLV+t4sU<^9n?th)}ci+URaa=GU5Vx
zZA+!@%YU!&W7b6(^$q-#ZBv`CgaXmZ`aq?!eznMESzx`>w~NqokvXpW7A`gd3vV_y
zs{FiseOc>$Yf0p2y#q22%V_;$G8*#bE1K_eMf(WOjV|oXG0fwb*evo^<6()`$0Qp1
z7#`H7rj4KX;5_Q|%V-Vp_in;i!0$KvqllMm4g;^2{tZ6JXd++Mdf!;8V&8Vk5ya+C
zy|4k9N_}-0`GwD#ys_kyOV;`?!*BWbhBp5aaJ1fuHFi`gP%~QpL9@A;ap_uLsr@-)
z0$J8Pb;0f(E&LO#Z5Z`l_Q>q4zeA4Ie${O5l`v{#>+FAg6FzJ~p1H@oa%q{l{2*j`
z_RtpU8g?q7EvQKW--kfkh`f-`7lwa06Ugg>4{L%~8i6qL9j$Mas~y3fD`uSiu#MXF
z3UqAy-)6HPwIz1#ExGD$8Q84-d)Ao*+o*fF%X1DfzQeur!(TV=T6-s2|NCDzH<MrO
zF%7nZ!B=otRzhLi1*p%v%sct_h7aoTd^n?La>h(Jku!`^zNjbVaH$y1O@^meh$4B$
z1h&=L(+M3sqqW|-#kH(A#9rh!YC0N1JU1gqceLoaMbrprM?m{gi$>Wz{HMME^fGpW
z^UaHS#x4Ng=s$8{om;`Od3G{3e8yq8w~Q+aeG|<aH!_LDqvAWYZo^vfi(d<P0^Wcx
z&=FV_@CO2c)q&1HS71$G-EYchEg8SZ{~I#?wlXVrep{J<1pXi2kQ=j|DvNo86Yu7X
zjj@kRJO}(3#zUdg2Sai&bP9iQ&ziJ(&^BV+A3F207CJo?I`jPypeS88%9d{OQ1?w>
zj)yus`@68|sAn3_QrQ~!y{yf7LZ=5hZ$M99ml<=)$t-e!F6y*n8->8B(a`A|$~N;v
znO?|HcZ;n*bP8+m^mg{&2uT;bRf83O(`At$WT=C(*P!D*dieE%=c4z5?|et-bA9Jl
z&G|#eXF@Z5oj2b2&UfDoo$l)j9p}0z^V-=5)?%)g{(KGdjLSiL?O}{Lf5V<%@pHv5
z>LkxC@c7W%q7t#^Z)1KO<7q1{=R61BFvF0x8C4E<f8Mg)Z_ZmpMeA=v+eV#uMnOA?
z9_zp0IqyB^o8$UJ&wtunc<2mLBztV$o8ZlBChtq07rig|E|T}cs`LJHfw|S8<9#9H
zXy}9r*(rp~kT7Jqz6I<vuC)~dM{YPzU;g-<;BC{?&y=@hlb9b;vIj%Yr$c8thnV0q
zmQL!Q2Ty=JuDE;?^UR4eF2t|lxd|F$uJA1ztD3zHOyBI9-LGmkj5*p|R=Ta+%z64(
z@=Bdt(|wyqtx*sM=GN9}j>#9r{4s0(yyu*E&WDm`3anjX`9Z#G;A37Pk6mPLMWB_2
z^vEBy;5$vOPs(aSGuIn%V4VH3$AQV;>%wUVCjUtXCjTiHo^#=w4ovxfb70CZxiHTH
zt6BbXk2*2;nG<t=IWhN=6LSwaG53nX^rzQ>=@0jd)ij*`$c+P&&OKu_%Rknw6SH0w
zru;PrraWuaYL@=5IWXz0SttEX2PU0$tLVh6QzvF!Ix%a|iCKdR)4zxVQy**5YIgix
zn0r~#@lqwXU6^;O)jaYcHAL@|cbbFfSuX+fUi`W|j9xX;M-@O%{8{4i3O{~>wVKj5
zSH_u(S?ascqORCu{c+Eb{-rkbCD6I&Nx#;H&U)m0JGz_y>n{2C!vE~z|5xC2*}9`>
z&rN6ixF3R=<xkxu@5ba;_Y(EBqpSO=9lc#V)m=sYc64=Tk^bK<|K1DJU+z!d(Z7ql
zTR-*n{}%eX5LeY$UvAtkA3P71-z6Vz{@-`$e*{?Fja=^&E;{{J_u{+7TiuWEM(26M
z`-t=*=;!_%H?ikE^F#YQkKS)So^Inm&#QoKKhcJ+?pgZhroR_<=ZF5Pdzt#&_2AY=
zesxE;vrjtD%P6{bbhkb?ro6h_Dc>%?>P{!!aK&fVg}(sI`+JY=&tJLdUkC05{V|*V
z9S1##dj2C12zCp4-f2EXT(<JF!K29$VD)}LoUk$9mx)WjTfomod=XgLBfbi(&M)G>
z16Jof@jn93l`a2>zXd!G%=aVWe*wM$%z7by3-~6mqE~^JfO%e%-T+p=9f*GgtbP{|
zcY3Y!^1jW#30S?qll};>Iv<G-0^c}m?HA&4VD&yhT(q&z)^`b5op+@F4KU9y?l<CZ
z0QWoacY%3coV4k;fz^98`T0>n?RVl|0IU5?9E9Q5?fZN^@Md83?o0Y3Himk67<iux
zj{$Q(EC2Gq>OFV^>hBz|dJm?)F9EClN&L6KYJU;`1F+gZlwSbmeu=2{0jv5a{b#_c
z-iiMUSe<{=#~0RHkY^+Pp^laJiy-K`fYtj2*MGpq<KSP9uSCayt?wT=vryj>$w(wF
zktF_g8+tsQj2Gjg?;X?AMk+Cu)Q{`wu~a^nESwk{cye&;z~In<zC)*Xj*TRYRK8dk
zOO`U3neK#i7xj}xNhZ1r(%roS|KiyxJ-wq)j2p#L9<y7wZq39~*$1f4=|)yhyG3RS
zt(ihGnNCemy{WTMe2!m9b~@<h#IDu^K1~!L4*@+h5i@;qx-*fB8>Yqwy)=p~1-6M6
zp3JARDUwe{Ci7`LgbyqN_Tu?GO->Y)T6!5zr*nxF*Hcs3c-jpWza6YZyjau?7(=iM
z7I?tabUd3(>jvYqb*l|x&!=QxDV0w46^lk{qEyrikx1Y0q1fO^-|^j%Ly_n}q;K!g
zu3eF1dxv)JjErD3I504<Gje+HXynMqz{oR?M^2B7ero@x`Yreb;K8BD;gM+H{(;EA
zzP>$?;en_3M54n3BYPqPeftKF?~+)oRM2BcZ{oRFVp>l;m&#6I(oAtIW;>tG#gmwH
zpqNpltaBz?N~c{@&+A6cjB_l;mBfvy<FVs<R@V)&4H(6ko-G<P5ajSAa$=6+6FCDz
z<iwg>p_r~RFELv)<V=XV)w6UH6DT$ZnW!*bDkgI$vJ%Uu<HgCGk%{GVg`%}`hq?!;
z4n2cbp!7^?8gf>Y7`kjOR#=&g6;7n!0tg1Cv13*YSe~u8Unu5`_>^utoJ+*h9GfvR
zOAdfRo6?Ksq!o-rE|Wp=K&#Pm!7!Jail?2nhL6UEQW-OxrZZScAs<iBgo*RIkvDP)
zM#?>3oW=o?bW#w}NpmH|QXv*kCJjpq*KUT+(5F&4gw}~-Qzh(C%t3f$@WAlsp@Bn+
zqm`;cYRZvx#fJ4{Q6jNeQlE^M(nylI>0-%L0qH@l6pJ$_jKs9iE4vD?sgdPGE;|X8
z`I4cd7GlX<X(Fu`WZ3jC5*dvHMk4#-1>HTTf~DfYSfT<4Ge}V+^6X$FVsYU7#nElv
z+vs|cA#_&5I6Rcf;xK$HJp9c5(Le0&34hw$(&5KHzVpvIWiXq^C*u7`A!@#`7dM`H
z=;rX5WBAaH(dklVBD{ac{zo4rPd<ecqOBq^zuShl=ibNhzVFE3Q2#K_`KO-PH8!lL
zbu4|ylh5q1EXPkyhTn%0_Z`9I4h+YJ51W6F^6#^Q(w)>NN>i~(Bc9QvyD*a}#wXAh
z4YSYYikM~jV(plowh2(hSGV2NS+<^~Rk+*y!fz5~#`^s>>fr-%Qx|nomugBEzPsD+
z>DC>)35LcM6MDtRuTGBFN+I7@716;T#+a{Xs@=r5#4sLQ(SlbjQy+g<Y{P@soL2iO
zJ{qLSWH)7t@1QW%YRB*rxT%F!{Cga8N`~Y-_<ri(Q?yTF&S`fH|L;B2hVTCXPO>ME
diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_hw_setup.inc b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_hw_setup.inc
deleted file mode 100644
index dbce4dfdbd5f..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_hw_setup.inc
+++ /dev/null
@@ -1,67 +0,0 @@
-//
-// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-//
-//  This program and the accompanying materials
-//  are licensed and made available under the terms and conditions of the BSD License
-//  which accompanies this distribution.  The full text of the license may be found at
-//  http://opensource.org/licenses/bsd-license.php
-//
-//  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-//  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-//



-error = continue
-unload
-error = abort



-setreg @CP15_CONTROL = 0x0005107E
-setreg @cpsr=0x000000D3



-; General clock settings.
-setmem /32 0x48307270=0x00000080
-setmem /32 0x48306D40=0x00000003
-setmem /32 0x48005140=0x03020A50



-;Clock configuration
-setmem /32 0x48004A40=0x0000030A
-setmem /32 0x48004C40=0x00000015



-;DPLL3 (Core) settings
-setmem /32 0x48004D00=0x00370037
-setmem /32 0x48004D30=0x00000000
-setmem /32 0x48004D40=0x094C0C00



-;DPLL4 (Peripheral) settings
-setmem /32 0x48004D00=0x00370037
-setmem /32 0x48004D30=0x00000000
-setmem /32 0x48004D44=0x0001B00C
-setmem /32 0x48004D48=0x00000009



-;DPLL1 (MPU) settings
-setmem /32 0x48004904=0x00000037
-setmem /32 0x48004934=0x00000000
-setmem /32 0x48004940=0x0011F40C
-setmem /32 0x48004944=0x00000001
-setmem /32 0x48004948=0x00000000



-;RAM setup.
-setmem /16 0x6D000010=0x0000
-setmem /16 0x6D000040=0x0001
-setmem /16 0x6D000044=0x0100
-setmem /16 0x6D000048=0x0000
-setmem /32 0x6D000060=0x0000000A
-setmem /32 0x6D000070=0x00000081
-setmem /16 0x6D000040=0x0003
-setmem /32 0x6D000080=0x02D04011
-setmem /16 0x6D000084=0x0032
-setmem /16 0x6D00008C=0x0000
-setmem /32 0x6D00009C=0xBA9DC4C6
-setmem /32 0x6D0000A0=0x00012522
-setmem /32 0x6D0000A4=0x0004E201
-setmem /16 0x6D000040=0x0003
-setmem /32 0x6D0000B0=0x02D04011
-setmem /16 0x6D0000B4=0x0032
-setmem /16 0x6D0000BC=0x0000
-setmem /32 0x6D0000C4=0xBA9DC4C6
-setmem /32 0x6D0000C8=0x00012522
-setmem /32 0x6D0000D4=0x0004E201
diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_load_symbols.inc b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_load_symbols.inc
deleted file mode 100644
index 33e3eacac45d..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_load_symbols.inc
+++ /dev/null
@@ -1,23 +0,0 @@
-//
-// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-//
-//  This program and the accompanying materials
-//  are licensed and made available under the terms and conditions of the BSD License
-//  which accompanies this distribution.  The full text of the license may be found at
-//  http://opensource.org/licenses/bsd-license.php
-//
-//  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-//  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-//



-include 'ZZZZZZ/rvi_symbols_macros.inc'



-macro write_symbols_file("ZZZZZZ/rvi_symbols.tmp", 0x00000000, 0x10000000)



-host "bash -o igncr ZZZZZZ/rvi_convert_symbols.sh ZZZZZZ/rvi_symbols.tmp ZZZZZZ/rvi_symbols.inc"
-include 'ZZZZZZ/rvi_symbols.inc'
-load /NI /NP 'ZZZZZZ/rvi_dummy.axf' ;.constdata
-unload rvi_dummy.axf
-delfile rvi_dummy.axf




diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_symbols_macros.inc b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_symbols_macros.inc
deleted file mode 100755
index 0fc2c64b1a27..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_symbols_macros.inc
+++ /dev/null
@@ -1,194 +0,0 @@
-//
-// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-//
-//  This program and the accompanying materials
-//  are licensed and made available under the terms and conditions of the BSD License
-//  which accompanies this distribution.  The full text of the license may be found at
-//  http://opensource.org/licenses/bsd-license.php
-//
-//  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-//  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-//



-define /R int compare_guid(guid1, guid2)

unsigned char *guid1;
unsigned char *guid2;

-{

return strncmp(guid1, guid2, 16);

-}
-.



-define /R unsigned char * find_system_table(mem_start, mem_size)

unsigned char *mem_start;
unsigned long mem_size;

-{

unsigned char *mem_ptr;

mem_ptr = mem_start + mem_size;

do
{
   mem_ptr -= 0x400000; // 4 MB



   if (strncmp(mem_ptr, "IBI SYST", 8) == 0)


   {


       return *(unsigned long *)(mem_ptr + 8); // EfiSystemTableBase


   }



} while (mem_ptr > mem_start);

return 0;

-}
-.



-define /R unsigned char * find_debug_info_table_header(system_table)

unsigned char *system_table;

-{

unsigned long configuration_table_entries;
unsigned char *configuration_table;
unsigned long index;
unsigned char debug_table_guid[16];

// Fill in the debug table's guid
debug_table_guid[ 0] = 0x77;
debug_table_guid[ 1] = 0x2E;
debug_table_guid[ 2] = 0x15;
debug_table_guid[ 3] = 0x49;
debug_table_guid[ 4] = 0xDA;
debug_table_guid[ 5] = 0x1A;
debug_table_guid[ 6] = 0x64;
debug_table_guid[ 7] = 0x47;
debug_table_guid[ 8] = 0xB7;
debug_table_guid[ 9] = 0xA2;
debug_table_guid[10] = 0x7A;
debug_table_guid[11] = 0xFE;
debug_table_guid[12] = 0xFE;
debug_table_guid[13] = 0xD9;
debug_table_guid[14] = 0x5E;
debug_table_guid[15] = 0x8B;

configuration_table_entries = *(unsigned long *)(system_table + 64);
configuration_table         = *(unsigned long *)(system_table + 68);

for (index = 0; index < configuration_table_entries; index++)
{
   if (compare_guid(configuration_table, debug_table_guid) == 0)


   {


       return *(unsigned long *)(configuration_table + 16);


   }



   configuration_table += 20;


}

return 0;

-}
-.



-define /R int valid_pe_header(header)

   unsigned char *header;



-{

if ((header[0x00] == 'M') &&
   (header[0x01] == 'Z') &&


   (header[0x80] == 'P') &&


   (header[0x81] == 'E'))


{
   return 1;


}

return 0;

-}
-.



-define /R unsigned long pe_headersize(header)

   unsigned char *header;



-{

unsigned long *size;

size = header + 0x00AC;

return *size;

-}
-.



-define /R unsigned char *pe_filename(header)

   unsigned char *header;



-{

unsigned long *debugOffset;
unsigned char *stringOffset;

if (valid_pe_header(header))
{
   debugOffset  = header + 0x0128;


   stringOffset = header + *debugOffset + 0x002C;



   return stringOffset;


}

return 0;

-}
-.



-define /R int char_is_valid(c)

   unsigned char c;



-{

if (c >= 32 && c < 127)
return 1;



return 0;

-}
-.



-define /R write_symbols_file(filename, mem_start, mem_size)

unsigned char *filename;
unsigned char *mem_start;
unsigned long mem_size;

-{

unsigned char *system_table;
unsigned char *debug_info_table_header;
unsigned char *debug_info_table;
unsigned long debug_info_table_size;
unsigned long index;
unsigned char *debug_image_info;
unsigned char *loaded_image_protocol;
unsigned char *image_base;
unsigned char *debug_filename;
unsigned long header_size;
int           status;

system_table = find_system_table(mem_start, mem_size);
if (system_table == 0)
{
   return;


}

status = fopen(88, filename, "w");

debug_info_table_header = find_debug_info_table_header(system_table);

debug_info_table      = *(unsigned long *)(debug_info_table_header + 8);
debug_info_table_size = *(unsigned long *)(debug_info_table_header + 4);

for (index = 0; index < (debug_info_table_size * 4); index += 4)
{
   debug_image_info = *(unsigned long *)(debug_info_table + index);



   if (debug_image_info == 0)


   {


       break;


   }



   loaded_image_protocol = *(unsigned long *)(debug_image_info + 4);



   image_base = *(unsigned long *)(loaded_image_protocol + 32);



   debug_filename = pe_filename(image_base);


   header_size    = pe_headersize(image_base);



   $fprintf 88, "%s 0x%08x\n", debug_filename, image_base + header_size$;


}


fclose(88);

-}
-.



diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_unload_symbols.inc b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_unload_symbols.inc
deleted file mode 100755
index b00a1322d4aa..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/rvi_unload_symbols.inc
+++ /dev/null
@@ -1,118 +0,0 @@
-//
-// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-//
-//  This program and the accompanying materials
-//  are licensed and made available under the terms and conditions of the BSD License
-//  which accompanies this distribution.  The full text of the license may be found at
-//  http://opensource.org/licenses/bsd-license.php
-//
-//  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-//  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-//



-error = continue



-unload



-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1
-delfile 1



-error = abort
diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols.cmm b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols.cmm
deleted file mode 100644
index 1bae1727633d..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols.cmm
+++ /dev/null
@@ -1,211 +0,0 @@
-//
-// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-//  
-//  This program and the accompanying materials
-//  are licensed and made available under the terms and conditions of the BSD License
-//  which accompanies this distribution.  The full text of the license may be found at
-//  http://opensource.org/licenses/bsd-license.php
-//
-//  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-//  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-//


ENTRY &ram_start &ram_size

;If system is running then stop the execution so we can load symbols.
break

;Reset all windows
WINPAGE.RESET

;Create AREA to display the symbols we are loading.
AREA.Reset
AREA.Create SYMBOL 300. 100.
AREA.View SYMBOL
AREA.Select SYMBOL
SYS.Option BE OFF

;Added based on suggestion from Lauterbach support.
MMU.TABLEWALK ON
MMU.ON

;Load symbols.
GOSUB load_symbols &ram_start &ram_size

;Open some windows and enable semihosting.
TOOLBAR ON
STATUSBAR ON
WINPAGE.RESET

WINCLEAR
WINPOS 0.0 17.0 72. 13. 0. 0. W000
SYStem

WINPOS 0.0 0.0 110. 55. 13. 1. W001
WINTABS 10. 10. 25. 62.
Data.List

WINPAGE.SELECT P000

//Enable semihosting
System.Option.BigEndian OFF

tronchip.set swi on		// ARM9/10/11 variant

// configure and open semihosting channel
winpos 50% 50% 50% 50%
term.heapinfo 0 0x20000 0x30000 0x20000
term.method armswi
term.mode string
term.gate

WINPOS 115.0 0. 70. 35. 0. 1. W002
Var.Local %HEX

WINPOS 115.10 45. 48. 9. 0. 0. W003
Register

END


-find_system_table:

ENTRY &mem_start &mem_size
&mem_ptr=&mem_start+&mem_size
RPT
(
&mem_ptr=&mem_ptr-0x400000  // 4 MB
&word1=Data.LONG(D:&mem_ptr)
&word2=Data.LONG(D:&mem_ptr+0x04)
IF &word1==0x20494249
(
 IF &word2==0x54535953


 (


   &result=Data.LONG(D:&mem_ptr+0x08)


   RETURN &result


 )


)
)
WHILE &mem_ptr>&mem_start
&result=0
RETURN &result


-compare_guid:

ENTRY &guid
IF Data.LONG(D:&guid)==0x49152E77
(
IF Data.LONG(D:&guid+0x04)==0x47641ADA
(
 IF Data.LONG(D:&guid+0x08)==0xFE7AA2B7


 (


   IF Data.LONG(D:&guid+0x0C)==0x8B5ED9FE


   (


     RETURN 0


   )


 )


)
)
RETURN 1


-find_debug_info_table_header:

ENTRY &system_table
&config_table_entries=Data.LONG(D:&system_table+0x40)
&config_table_pointer=Data.LONG(D:&system_table+0x44)
RPT &config_table_entries
(
GOSUB compare_guid &config_table_pointer
ENTRY &result
IF &result==0
(
 &result=Data.LONG(D:&config_table_pointer+0x10)


 RETURN &result


)
&config_table_pointer=&config_table_pointer+0x14
)
RETURN 0;


-valid_pe_header:

ENTRY &header
IF Data.BYTE(D:&header+0x00)==0x4D
(
IF Data.BYTE(D:&header+0x01)==0x5A
(
 IF Data.BYTE(D:&header+0x80)==0x50


 (


   IF Data.BYTE(D:&header+0x81)==0x45


   (


     RETURN 1


   )


 )


)
)
RETURN 0


-get_file_string:

ENTRY &stringOffset

local &string

&more_string=data.string(d:&stringOffset)

if (string.len("&more_string")>=128.)
(
&string="&string"+"&more_string"
&stringOffset=&stringOffset+string.len("&more_string")

//Get remaining file string
GOSUB get_file_string &stringOffset
ENTRY &more_string
&string="&string"+"&more_string"
)
else
(
&string="&string"+"&more_string"
&more_string=""
)
RETURN &string


-load_symbol_file:

ENTRY &header &load_address
GOSUB valid_pe_header &header
ENTRY &result

IF &result==1
(
&debugOffset=Data.LONG(D:&header+0x0128)
&stringOffset=&header+&debugOffset+0x002C

GOSUB get_file_string &stringOffset
ENTRY &filestring

PRINT "&filestring 0x" &load_address
TDIAG Data.load.elf &filestring &load_address /nocode /noclear
)
RETURN


-pe_headersize:

ENTRY &header;
RETURN Data.LONG(D:&header+0x00AC)


-load_symbols:

ENTRY &mem_start &mem_size
GOSUB find_system_table &mem_start &mem_size
ENTRY &system_table
GOSUB find_debug_info_table_header &system_table
ENTRY &debug_info_table_header
&debug_info_table=Data.LONG(D:&debug_info_table_header+0x08)
&debug_info_table_size=Data.LONG(D:&debug_info_table_header+0x04)
&index=0
RPT &debug_info_table_size
(
&debug_image_info=Data.LONG(D:&debug_info_table+&index)
IF &debug_image_info==0
 RETURN        


&loaded_image_protocol=Data.LONG(D:&debug_image_info+0x04);
&image_base=Data.LONG(D:&loaded_image_protocol+0x20);
GOSUB pe_headersize &image_base
ENTRY &header_size
&image_load_address=&image_base+&header_size
GOSUB load_symbol_file &image_base &image_load_address
&index=&index+0x4
)

RETURN

diff --git a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols_cygwin.cmm b/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols_cygwin.cmm
deleted file mode 100644
index db9ff4e966a3..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts/trace32_load_symbols_cygwin.cmm
+++ /dev/null
@@ -1,188 +0,0 @@
-//
-// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-//  
-//  This program and the accompanying materials
-//  are licensed and made available under the terms and conditions of the BSD License
-//  which accompanies this distribution.  The full text of the license may be found at
-//  http://opensource.org/licenses/bsd-license.php
-//
-//  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-//  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-//


ENTRY &ram_start &ram_size

;If system is running then stop the execution so we can load symbols.
break

;Reset all windows
WINPAGE.RESET

AREA.Reset
AREA.Create SYMBOL 300. 100.
AREA.View SYMBOL
AREA.Select SYMBOL
SYS.Option BE OFF

; Added based on suggestion from Lauterbach support.
MMU.TABLEWALK ON
MMU.ON

GOSUB load_symbols &ram_start &ram_size

;Open some windows.
WINPOS 83.125 29.063 48. 9. 0. 0. W003
Register

WINPOS 83.25 10. 48. 9. 0. 1. W002
Var.Local

END


-find_system_table:

ENTRY &mem_start &mem_size
&mem_ptr=&mem_start+&mem_size
RPT
(
&mem_ptr=&mem_ptr-0x400000  // 4 MB
&word1=Data.LONG(D:&mem_ptr)
&word2=Data.LONG(D:&mem_ptr+0x04)
IF &word1==0x20494249
(
 IF &word2==0x54535953


 (


   &result=Data.LONG(D:&mem_ptr+0x08)


   RETURN &result


 )


)
)
WHILE &mem_ptr>&mem_start
&result=0
RETURN &result


-compare_guid:

ENTRY &guid
IF Data.LONG(D:&guid)==0x49152E77
(
IF Data.LONG(D:&guid+0x04)==0x47641ADA
(
 IF Data.LONG(D:&guid+0x08)==0xFE7AA2B7


 (


   IF Data.LONG(D:&guid+0x0C)==0x8B5ED9FE


   (


     RETURN 0


   )


 )


)
)
RETURN 1


-find_debug_info_table_header:

ENTRY &system_table
&config_table_entries=Data.LONG(D:&system_table+0x40)
&config_table_pointer=Data.LONG(D:&system_table+0x44)
RPT &config_table_entries
(
GOSUB compare_guid &config_table_pointer
ENTRY &result
IF &result==0
(
 &result=Data.LONG(D:&config_table_pointer+0x10)


 RETURN &result


)
&config_table_pointer=&config_table_pointer+0x14
)
RETURN 0;


-valid_pe_header:

ENTRY &header
IF Data.BYTE(D:&header+0x00)==0x4D
(
IF Data.BYTE(D:&header+0x01)==0x5A
(
 IF Data.BYTE(D:&header+0x80)==0x50


 (


   IF Data.BYTE(D:&header+0x81)==0x45


   (


     RETURN 1


   )


 )


)
)
RETURN 0


-get_file_string:

ENTRY &stringOffset

local &string

&more_string=data.string(d:&stringOffset)

if (string.len("&more_string")>=128.)
(
&string="&string"+"&more_string"
&stringOffset=&stringOffset+string.len("&more_string")

//Get remaining file string
GOSUB get_file_string &stringOffset
ENTRY &more_string
&string="&string"+"&more_string"
)
else
(
&string="&string"+"&more_string"
&more_string=""
)
RETURN &string


-load_symbol_file:

ENTRY &header &load_address
GOSUB valid_pe_header &header
ENTRY &result

IF &result==1
(
&debugOffset=Data.LONG(D:&header+0x0128)
&stringOffset=&header+&debugOffset+0x002C

&stringOffset=&stringOffset+11.

GOSUB get_file_string &stringOffset
ENTRY &filestring

&filestring="c:"+"&filestring"

PRINT "&filestring 0x" &load_address
Data.load.elf &filestring &load_address /nocode /noclear
)
RETURN


-pe_headersize:

ENTRY &header;
RETURN Data.LONG(D:&header+0x00AC)


-load_symbols:

ENTRY &mem_start &mem_size
GOSUB find_system_table &mem_start &mem_size
ENTRY &system_table
GOSUB find_debug_info_table_header &system_table
ENTRY &debug_info_table_header
&debug_info_table=Data.LONG(D:&debug_info_table_header+0x08)
&debug_info_table_size=Data.LONG(D:&debug_info_table_header+0x04)
&index=0
RPT &debug_info_table_size
(
&debug_image_info=Data.LONG(D:&debug_info_table+&index)
IF &debug_image_info==0
 RETURN        


&loaded_image_protocol=Data.LONG(D:&debug_image_info+0x04);
&image_base=Data.LONG(D:&loaded_image_protocol+0x20);
GOSUB pe_headersize &image_base
ENTRY &header_size
&image_load_address=&image_base+&header_size
GOSUB load_symbol_file &image_base &image_load_address
&index=&index+0x4
)

RETURN


\ No newline at end of file
diff --git a/Platforms/TexasInstruments/BeagleBoard/Include/BeagleBoard.h b/Platforms/TexasInstruments/BeagleBoard/Include/BeagleBoard.h
deleted file mode 100755
index f9955b03752e..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Include/BeagleBoard.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/** @file
-*  Header defining the BeagleBoard constants (Base addresses, sizes, flags)
-*
-*  Copyright (c) 2011, ARM Limited. All rights reserved.
-*
-*  This program and the accompanying materials
-*  are licensed and made available under the terms and conditions of the BSD License
-*  which accompanies this distribution.  The full text of the license may be found at
-*  http://opensource.org/licenses/bsd-license.php
-*
-*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-*
-**/



-#ifndef __BEAGLEBOARD_PLATFORM_H__
-#define __BEAGLEBOARD_PLATFORM_H__



-// DDR attributes
-#define DDR_ATTRIBUTES_CACHED                ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK
-#define DDR_ATTRIBUTES_UNCACHED              ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED



-// SoC registers. L3 interconnects
-#define SOC_REGISTERS_L3_PHYSICAL_BASE       0x68000000
-#define SOC_REGISTERS_L3_PHYSICAL_LENGTH     0x08000000
-#define SOC_REGISTERS_L3_ATTRIBUTES          ARM_MEMORY_REGION_ATTRIBUTE_DEVICE



-// SoC registers. L4 interconnects
-#define SOC_REGISTERS_L4_PHYSICAL_BASE       0x48000000
-#define SOC_REGISTERS_L4_PHYSICAL_LENGTH     0x08000000
-#define SOC_REGISTERS_L4_ATTRIBUTES          ARM_MEMORY_REGION_ATTRIBUTE_DEVICE




-#if 0
-/*******************************************
-// Platform Memory Map
-*******************************************/



-// Can be NOR, DOC, DRAM, SRAM
-#define ARM_EB_REMAP_BASE                     0x00000000
-#define ARM_EB_REMAP_SZ                       0x04000000



-// Motherboard Peripheral and On-chip peripheral
-#define ARM_EB_SMB_MB_ON_CHIP_PERIPH_BASE     0x10000000
-#define ARM_EB_SMB_MB_ON_CHIP_PERIPH_SZ       0x00100000
-#define ARM_EB_BOARD_PERIPH_BASE              0x10000000
-//#define ARM_EB_CHIP_PERIPH_BASE             0x10020000



-// SMC
-#define ARM_EB_SMC_BASE                       0x40000000
-#define ARM_EB_SMC_SZ                         0x20000000



-// NOR Flash 1
-#define ARM_EB_SMB_NOR_BASE                   0x40000000
-#define ARM_EB_SMB_NOR_SZ                     0x04000000 /* 64 MB */
-// DOC Flash
-#define ARM_EB_SMB_DOC_BASE                   0x44000000
-#define ARM_EB_SMB_DOC_SZ                     0x04000000 /* 64 MB */
-// SRAM
-#define ARM_EB_SMB_SRAM_BASE                  0x48000000
-#define ARM_EB_SMB_SRAM_SZ                    0x02000000 /* 32 MB */
-// USB, Ethernet, VRAM
-#define ARM_EB_SMB_PERIPH_BASE                0x4E000000
-//#define ARM_EB_SMB_PERIPH_VRAM              0x4C000000
-#define ARM_EB_SMB_PERIPH_SZ                  0x02000000 /* 32 MB */



-// DRAM
-#define ARM_EB_DRAM_BASE                      0x70000000
-#define ARM_EB_DRAM_SZ                        0x10000000



-// Logic Tile
-#define ARM_EB_LOGIC_TILE_BASE                0xC0000000
-#define ARM_EB_LOGIC_TILE_SZ                  0x40000000



-/*******************************************
-// Motherboard peripherals
-*******************************************/



-// Define MotherBoard SYS flags offsets (from ARM_EB_BOARD_PERIPH_BASE)
-#define ARM_EB_SYS_FLAGS_REG                  (ARM_EB_BOARD_PERIPH_BASE + 0x00030)
-#define ARM_EB_SYS_FLAGS_SET_REG              (ARM_EB_BOARD_PERIPH_BASE + 0x00030)
-#define ARM_EB_SYS_FLAGS_CLR_REG              (ARM_EB_BOARD_PERIPH_BASE + 0x00034)
-#define ARM_EB_SYS_FLAGS_NV_REG               (ARM_EB_BOARD_PERIPH_BASE + 0x00038)
-#define ARM_EB_SYS_FLAGS_NV_SET_REG           (ARM_EB_BOARD_PERIPH_BASE + 0x00038)
-#define ARM_EB_SYS_FLAGS_NV_CLR_REG           (ARM_EB_BOARD_PERIPH_BASE + 0x0003C)
-#define ARM_EB_SYS_CLCD                       (ARM_EB_BOARD_PERIPH_BASE + 0x00050)
-#define ARM_EB_SYS_PROCID0_REG                (ARM_EB_BOARD_PERIPH_BASE + 0x00084)
-#define ARM_EB_SYS_PROCID1_REG                (ARM_EB_BOARD_PERIPH_BASE + 0x00088)
-#define ARM_EB_SYS_CFGDATA_REG                (ARM_EB_BOARD_PERIPH_BASE + 0x000A0)
-#define ARM_EB_SYS_CFGCTRL_REG                (ARM_EB_BOARD_PERIPH_BASE + 0x000A4)
-#define ARM_EB_SYS_CFGSTAT_REG                (ARM_EB_BOARD_PERIPH_BASE + 0x000A8)



-// SP810 Controller
-#define SP810_CTRL_BASE                       (ARM_EB_BOARD_PERIPH_BASE + 0x01000)



-// SYSTRCL Register
-#define ARM_EB_SYSCTRL                        0x10001000



-// Uart0
-#define PL011_CONSOLE_UART_BASE               (ARM_EB_BOARD_PERIPH_BASE + 0x09000)
-#define PL011_CONSOLE_UART_SPEED              115200



-// SP804 Timer Bases
-#define SP804_TIMER0_BASE                     (ARM_EB_BOARD_PERIPH_BASE + 0x11000)
-#define SP804_TIMER1_BASE                     (ARM_EB_BOARD_PERIPH_BASE + 0x11020)
-#define SP804_TIMER2_BASE                     (ARM_EB_BOARD_PERIPH_BASE + 0x12000)
-#define SP804_TIMER3_BASE                     (ARM_EB_BOARD_PERIPH_BASE + 0x12020)



-// PL301 RTC
-#define PL031_RTC_BASE                        (ARM_EB_BOARD_PERIPH_BASE + 0x17000)



-// Dynamic Memory Controller Base
-#define ARM_EB_DMC_BASE                       0x10018000



-// Static Memory Controller Base
-#define ARM_EB_SMC_CTRL_BASE                  0x10080000



-#define PL111_CLCD_BASE                       0x10020000
-//TODO: FIXME ... Reserved the memory in UEFI !!! Otherwise risk of corruption
-#define PL111_CLCD_VRAM_BASE                  0x78000000



-#define ARM_EB_SYS_OSCCLK4                    0x1000001C




-/*// System Configuration Controller register Base addresses
-//#define ARM_EB_SYS_CFG_CTRL_BASE                0x100E2000
-#define ARM_EB_SYS_CFGRW0_REG                   0x100E2000
-#define ARM_EB_SYS_CFGRW1_REG                   0x100E2004
-#define ARM_EB_SYS_CFGRW2_REG                   0x100E2008



-#define ARM_EB_CFGRW1_REMAP_NOR0                0
-#define ARM_EB_CFGRW1_REMAP_NOR1                (1 << 28)
-#define ARM_EB_CFGRW1_REMAP_EXT_AXI             (1 << 29)
-#define ARM_EB_CFGRW1_REMAP_DRAM                (1 << 30)



-// PL301 Fast AXI Base Address
-#define ARM_EB_FAXI_BASE                        0x100E9000



-// L2x0 Cache Controller Base Address
-//#define ARM_EB_L2x0_CTLR_BASE                   0x1E00A000*/




-// PL031 RTC - Other settings
-#define PL031_PPM_ACCURACY                      300000000



-/*******************************************
-// Interrupt Map
-*******************************************/



-// Timer Interrupts
-#define TIMER01_INTERRUPT_NUM                34
-#define TIMER23_INTERRUPT_NUM                35




-/*******************************************
-// EFI Memory Map in Permanent Memory (DRAM)
-*******************************************/



-// This region is allocated at the bottom of the DRAM. It will be used
-// for fixed address allocations such as Vector Table
-#define ARM_EB_EFI_FIX_ADDRESS_REGION_SZ        SIZE_8MB



-// This region is the memory declared to PEI as permanent memory for PEI
-// and DXE. EFI stacks and heaps will be declared in this region.
-#define ARM_EB_EFI_MEMORY_REGION_SZ             0x1000000
-#endif



-typedef enum {

REVISION_XM,
REVISION_UNKNOWN0,
REVISION_UNKNOWN1,
REVISION_UNKNOWN2,
REVISION_UNKNOWN3,
REVISION_C4,
REVISION_C123,
REVISION_AB,

-} BEAGLEBOARD_REVISION;



-#endif
diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoard.c b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoard.c
deleted file mode 100755
index 3b0244004853..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoard.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/** @file
-*
-*  Copyright (c) 2011-2012, ARM Limited. All rights reserved.
-*
-*  This program and the accompanying materials
-*  are licensed and made available under the terms and conditions of the BSD License
-*  which accompanies this distribution.  The full text of the license may be found at
-*  http://opensource.org/licenses/bsd-license.php
-*
-*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-*
-**/



-#include <Library/IoLib.h>
-#include <Library/ArmPlatformLib.h>
-#include <Library/DebugLib.h>
-#include <Library/PcdLib.h>



-#include <Omap3530/Omap3530.h>
-#include <BeagleBoard.h>



-VOID
-PadConfiguration (

BEAGLEBOARD_REVISION Revision
);


-VOID
-ClockInit (

VOID
);


-/**

Detect board revision

@return Board revision

-**/
-BEAGLEBOARD_REVISION
-BeagleBoardGetRevision (

VOID
)

-{

UINT32 OldPinDir;
UINT32 Revision;

// Read GPIO 171, 172, 173
OldPinDir = MmioRead32 (GPIO6_BASE + GPIO_OE);
MmioWrite32(GPIO6_BASE + GPIO_OE, (OldPinDir | BIT11 | BIT12 | BIT13));
Revision = MmioRead32 (GPIO6_BASE + GPIO_DATAIN);

// Restore I/O settings
MmioWrite32 (GPIO6_BASE + GPIO_OE, OldPinDir);

return (BEAGLEBOARD_REVISION)((Revision >> 11) & 0x7);

-}



-/**

Return the current Boot Mode

This function returns the boot reason on the platform


-**/
-EFI_BOOT_MODE
-ArmPlatformGetBootMode (

VOID
)

-{

return BOOT_WITH_FULL_CONFIGURATION;

-}



-/**

Initialize controllers that must setup at the early stage

Some peripherals must be initialized in Secure World.
For example, some L2x0 requires to be initialized in Secure World


-**/
-RETURN_STATUS
-ArmPlatformInitialize (

IN  UINTN                     MpId
)

-{

BEAGLEBOARD_REVISION Revision;

Revision = BeagleBoardGetRevision();

// Set up Pin muxing.
PadConfiguration (Revision);

// Set up system clocking
ClockInit ();

// Turn off the functional clock for Timer 3
MmioAnd32 (CM_FCLKEN_PER, 0xFFFFFFFF ^ CM_ICLKEN_PER_EN_GPT3_ENABLE );
ArmDataSynchronizationBarrier ();

// Clear IRQs
MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
ArmDataSynchronizationBarrier ();

return RETURN_SUCCESS;

-}



-/**

Initialize the system (or sometimes called permanent) memory

This memory is generally represented by the DRAM.


-**/
-VOID
-ArmPlatformInitializeSystemMemory (

VOID
)

-{

// We do not need to initialize the System Memory on RTSM

-}



-VOID
-ArmPlatformGetPlatformPpiList (

OUT UINTN                   *PpiListSize,
OUT EFI_PEI_PPI_DESCRIPTOR  **PpiList
)

-{

*PpiListSize = 0;
*PpiList = NULL;

-}



-UINTN
-ArmPlatformGetCorePosition (

IN UINTN MpId
)

-{

return 1;

-}



diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.S b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.S
deleted file mode 100644
index 958f0029935c..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.S
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-#  Copyright (c) 2012-2013, ARM Limited. All rights reserved.
-#
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#



-#include <AsmMacroIoLib.h>



-//UINTN
-//ArmPlatformIsPrimaryCore (
-//  IN UINTN MpId
-//  );
-ASM_FUNC(ArmPlatformIsPrimaryCore)

// BeagleBoard has a single core. We must always return 1.
mov   r0, #1
bx    lr


-ASM_FUNC(ArmPlatformPeiBootAction)

bx    lr


-//UINTN
-//ArmPlatformGetPrimaryCoreMpId (
-//  VOID
-//  );
-ASM_FUNC(ArmPlatformGetPrimaryCoreMpId)

// The BeagleBoard is a uniprocessor platform. The MPIDR of primary core is
// always the MPIDR of the calling CPU.
b   ASM_PFX(ArmReadMpidr)


-ASM_FUNCTION_REMOVE_IF_UNREFERENCED
diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.asm b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.asm
deleted file mode 100644
index 20fa83f133e9..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardHelper.asm
+++ /dev/null
@@ -1,48 +0,0 @@
-//
-//  Copyright (c) 2012-2013, ARM Limited. All rights reserved.
-//
-//  This program and the accompanying materials
-//  are licensed and made available under the terms and conditions of the BSD License
-//  which accompanies this distribution.  The full text of the license may be found at
-//  http://opensource.org/licenses/bsd-license.php
-//
-//  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-//  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-//
-//


INCLUDE AsmMacroIoLib.inc

EXPORT    ArmPlatformPeiBootAction
EXPORT    ArmPlatformIsPrimaryCore
EXPORT    ArmPlatformGetPrimaryCoreMpId

IMPORT    ArmReadMpidr

AREA BeagleBoardHelper, CODE, READONLY


-//UINTN
-//ArmPlatformIsPrimaryCore (
-//  IN UINTN MpId
-//  );
-ArmPlatformIsPrimaryCore FUNCTION

// BeagleBoard has a single core. We must always return 1.
mov   r0, #1
bx    lr
ENDFUNC


-ArmPlatformPeiBootAction FUNCTION

bx    lr
ENDFUNC


-//UINTN
-//ArmPlatformGetPrimaryCoreMpId (
-//  VOID
-//  );
-ArmPlatformGetPrimaryCoreMpId FUNCTION

// The BeagleBoard is a uniprocessor platform. The MPIDR of primary core is
// always the MPIDR of the calling CPU.
b     ArmReadMpidr
ENDFUNC

END

diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardLib.inf b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardLib.inf
deleted file mode 100755
index b6c76a196ea6..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardLib.inf
+++ /dev/null
@@ -1,54 +0,0 @@
-#/* @file
-#  Copyright (c) 2011-2013, ARM Limited. All rights reserved.
-#
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#*/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = BeagleBoardLib
FILE_GUID                      = 736343a0-1d96-11e0-aaaa-0002a5d5c51b
MODULE_TYPE                    = BASE
VERSION_STRING                 = 1.0
LIBRARY_CLASS                  = ArmPlatformLib


-[Packages]

MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
ArmPkg/ArmPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec
OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dec


-[LibraryClasses]

IoLib
ArmLib
MemoryAllocationLib


-[Sources.common]

BeagleBoardHelper.asm  | RVCT
BeagleBoardHelper.S    | GCC
BeagleBoard.c
BeagleBoardMem.c
PadConfiguration.c
Clock.c
BeagleBoardHelper.S    | GCC
BeagleBoardHelper.asm  | RVCT


-[FeaturePcd]

gEmbeddedTokenSpaceGuid.PcdCacheEnable


-[FixedPcd]

gArmTokenSpaceGuid.PcdFdBaseAddress
gArmTokenSpaceGuid.PcdFdSize

gArmTokenSpaceGuid.PcdSystemMemoryBase
gArmTokenSpaceGuid.PcdSystemMemorySize

diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardMem.c b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardMem.c
deleted file mode 100755
index b77b06993061..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/BeagleBoardMem.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/** @file
-*
-*  Copyright (c) 2011, ARM Limited. All rights reserved.
-*
-*  This program and the accompanying materials
-*  are licensed and made available under the terms and conditions of the BSD License
-*  which accompanies this distribution.  The full text of the license may be found at
-*  http://opensource.org/licenses/bsd-license.php
-*
-*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-*
-**/



-#include <Library/ArmPlatformLib.h>
-#include <Library/DebugLib.h>
-#include <Library/PcdLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/IoLib.h>



-#include <BeagleBoard.h>



-#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS          4



-/**

Return the Virtual Memory Map of your platform

This Virtual Memory Map is used by MemoryInitPei Module to initialize the MMU on your platform.

@param[out]   VirtualMemoryMap    Array of ARM_MEMORY_REGION_DESCRIPTOR describing a Physical-to-
                               Virtual Memory mapping. This array must be ended by a zero-filled


                               entry




-**/
-VOID
-ArmPlatformGetVirtualMemoryMap (

IN ARM_MEMORY_REGION_DESCRIPTOR** VirtualMemoryMap
)

-{

ARM_MEMORY_REGION_ATTRIBUTES  CacheAttributes;
UINTN                         Index = 0;
ARM_MEMORY_REGION_DESCRIPTOR  *VirtualMemoryTable;

ASSERT(VirtualMemoryMap != NULL);

VirtualMemoryTable = (ARM_MEMORY_REGION_DESCRIPTOR*)AllocatePages(EFI_SIZE_TO_PAGES (sizeof(ARM_MEMORY_REGION_DESCRIPTOR) * MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS));
if (VirtualMemoryTable == NULL) {
return;
}

if (FeaturePcdGet(PcdCacheEnable) == TRUE) {
CacheAttributes = DDR_ATTRIBUTES_CACHED;
} else {
CacheAttributes = DDR_ATTRIBUTES_UNCACHED;
}

// ReMap (Either NOR Flash or DRAM)
VirtualMemoryTable[Index].PhysicalBase = PcdGet64 (PcdSystemMemoryBase);
VirtualMemoryTable[Index].VirtualBase  = PcdGet64 (PcdSystemMemoryBase);
VirtualMemoryTable[Index].Length       = PcdGet64 (PcdSystemMemorySize);
VirtualMemoryTable[Index].Attributes   = CacheAttributes;

// SOC Registers. L3 interconnects
VirtualMemoryTable[++Index].PhysicalBase = SOC_REGISTERS_L3_PHYSICAL_BASE;
VirtualMemoryTable[Index].VirtualBase  = SOC_REGISTERS_L3_PHYSICAL_BASE;
VirtualMemoryTable[Index].Length       = SOC_REGISTERS_L3_PHYSICAL_LENGTH;
VirtualMemoryTable[Index].Attributes   = SOC_REGISTERS_L3_ATTRIBUTES;

// SOC Registers. L4 interconnects
VirtualMemoryTable[++Index].PhysicalBase = SOC_REGISTERS_L4_PHYSICAL_BASE;
VirtualMemoryTable[Index].VirtualBase  = SOC_REGISTERS_L4_PHYSICAL_BASE;
VirtualMemoryTable[Index].Length       = SOC_REGISTERS_L4_PHYSICAL_LENGTH;
VirtualMemoryTable[Index].Attributes   = SOC_REGISTERS_L4_ATTRIBUTES;

// End of Table
VirtualMemoryTable[++Index].PhysicalBase = 0;
VirtualMemoryTable[Index].VirtualBase  = 0;
VirtualMemoryTable[Index].Length       = 0;
VirtualMemoryTable[Index].Attributes   = (ARM_MEMORY_REGION_ATTRIBUTES)0;

ASSERT((Index + 1) == MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS);

*VirtualMemoryMap = VirtualMemoryTable;

-}
diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/Clock.c b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/Clock.c
deleted file mode 100755
index 6ca48e0c9fcb..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/Clock.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include <Library/IoLib.h>
-#include <Library/DebugLib.h>



-#include <Omap3530/Omap3530.h>



-VOID
-ClockInit (

VOID
)

-{

//DPLL1 - DPLL4 are configured part of Configuration header which OMAP3 ROM parses.

// Enable PLL5 and set to 120 MHz as a reference clock.
MmioWrite32 (CM_CLKSEL4_PLL, CM_CLKSEL_PLL_MULT(120) | CM_CLKSEL_PLL_DIV(13));
MmioWrite32 (CM_CLKSEL5_PLL, CM_CLKSEL_DIV_120M(1));
MmioWrite32 (CM_CLKEN2_PLL, CM_CLKEN_FREQSEL_075_100 | CM_CLKEN_ENABLE);

// Turn on functional & interface clocks to the USBHOST power domain
MmioOr32(CM_FCLKEN_USBHOST, CM_FCLKEN_USBHOST_EN_USBHOST2_ENABLE
                         | CM_FCLKEN_USBHOST_EN_USBHOST1_ENABLE);


MmioOr32(CM_ICLKEN_USBHOST, CM_ICLKEN_USBHOST_EN_USBHOST_ENABLE);

// Turn on functional & interface clocks to the USBTLL block.
MmioOr32(CM_FCLKEN3_CORE, CM_FCLKEN3_CORE_EN_USBTLL_ENABLE);
MmioOr32(CM_ICLKEN3_CORE, CM_ICLKEN3_CORE_EN_USBTLL_ENABLE);

// Turn on functional & interface clocks to MMC1 and I2C1 modules.
MmioOr32(CM_FCLKEN1_CORE, CM_FCLKEN1_CORE_EN_MMC1_ENABLE
                       | CM_FCLKEN1_CORE_EN_I2C1_ENABLE);


MmioOr32(CM_ICLKEN1_CORE, CM_ICLKEN1_CORE_EN_MMC1_ENABLE
                       | CM_ICLKEN1_CORE_EN_I2C1_ENABLE);



// Turn on functional & interface clocks to various Peripherals.
MmioOr32(CM_FCLKEN_PER, CM_FCLKEN_PER_EN_UART3_ENABLE
                     | CM_FCLKEN_PER_EN_GPT4_ENABLE


                     | CM_FCLKEN_PER_EN_GPIO2_ENABLE


                     | CM_FCLKEN_PER_EN_GPIO3_ENABLE


                     | CM_FCLKEN_PER_EN_GPIO4_ENABLE


                     | CM_FCLKEN_PER_EN_GPIO5_ENABLE


                     | CM_FCLKEN_PER_EN_GPIO6_ENABLE);


MmioOr32(CM_ICLKEN_PER, CM_ICLKEN_PER_EN_UART3_ENABLE
                     | CM_ICLKEN_PER_EN_GPT3_ENABLE


                     | CM_ICLKEN_PER_EN_GPT4_ENABLE


                     | CM_ICLKEN_PER_EN_GPIO2_ENABLE


                     | CM_ICLKEN_PER_EN_GPIO3_ENABLE


                     | CM_ICLKEN_PER_EN_GPIO4_ENABLE


                     | CM_ICLKEN_PER_EN_GPIO5_ENABLE


                     | CM_ICLKEN_PER_EN_GPIO6_ENABLE);



// Turn on functional & inteface clocks to various wakeup modules.
MmioOr32(CM_FCLKEN_WKUP, CM_FCLKEN_WKUP_EN_GPIO1_ENABLE
                      | CM_FCLKEN_WKUP_EN_WDT2_ENABLE);


MmioOr32(CM_ICLKEN_WKUP, CM_ICLKEN_WKUP_EN_GPIO1_ENABLE
                      | CM_ICLKEN_WKUP_EN_WDT2_ENABLE);



-}
diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/PadConfiguration.c b/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/PadConfiguration.c
deleted file mode 100755
index e6f7cc55ff00..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Library/BeagleBoardLib/PadConfiguration.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/** @file


Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include <PiPei.h>
-#include <Library/IoLib.h>
-#include <Library/DebugLib.h>
-#include <Omap3530/Omap3530.h>
-#include <BeagleBoard.h>



-#define NUM_PINS_SHARED 232
-#define NUM_PINS_ABC 6
-#define NUM_PINS_XM 12



-PAD_CONFIGURATION PadConfigurationTableShared[] = {

//Pin,           MuxMode,    PullConfig,                      InputEnable
{ SDRC_D0,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D1,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D2,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D3,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D4,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D5,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D6,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D7,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D8,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D9,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D10,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D11,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D12,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D13,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D14,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D15,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D16,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D17,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D18,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D19,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D20,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D21,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D22,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D23,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D24,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D25,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D26,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D27,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D28,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D29,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D30,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_D31,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_CLK,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_DQS0,     MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_CKE0,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ SDRC_CKE1,     MUXMODE7,   PULL_DISABLED,                INPUT  },
{ SDRC_DQS1,     MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_DQS2,     MUXMODE0,   PULL_DISABLED,                INPUT  },
{ SDRC_DQS3,     MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_A1,       MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ GPMC_A2,       MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ GPMC_A3,       MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ GPMC_A4,       MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ GPMC_A5,       MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ GPMC_A6,       MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ GPMC_A7,       MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ GPMC_A8,       MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ GPMC_A9,       MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ GPMC_A10,      MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ GPMC_D0,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D1,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D2,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D3,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D4,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D5,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D6,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D7,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D8,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D9,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D10,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D11,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D12,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D13,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D14,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_D15,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_NCS0,     MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_NCS1,     MUXMODE0,   PULL_UP_SELECTED,             OUTPUT },
{ GPMC_NCS2,     MUXMODE0,   PULL_UP_SELECTED,             OUTPUT },
{ GPMC_NCS3,     MUXMODE0,   PULL_UP_SELECTED,             OUTPUT },
{ GPMC_NCS4,     MUXMODE0,   PULL_UP_SELECTED,             OUTPUT },
{ GPMC_NCS5,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ GPMC_NCS6,     MUXMODE1,   PULL_DISABLED,                INPUT  },
{ GPMC_NCS7,     MUXMODE1,   PULL_UP_SELECTED,             INPUT  },
{ GPMC_CLK,      MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ GPMC_NADV_ALE, MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_NOE,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_NWE,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_NBE0_CLE, MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ GPMC_NBE1,     MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_NWP,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ GPMC_WAIT0,    MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ GPMC_WAIT1,    MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ GPMC_WAIT2,    MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ GPMC_WAIT3,    MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ DSS_PCLK,      MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_HSYNC,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_PSYNC,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_ACBIAS,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA0,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA1,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA2,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA3,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA4,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA5,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA6,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA7,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA8,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA9,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA10,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA11,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA12,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA13,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA14,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA15,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA16,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA17,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ CAM_HS,        MUXMODE0,   PULL_UP_SELECTED,             INPUT },
{ CAM_VS,        MUXMODE0,   PULL_UP_SELECTED,             INPUT },
{ CAM_XCLKA,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ CAM_PCLK,      MUXMODE0,   PULL_UP_SELECTED,             INPUT },
{ CAM_FLD,       MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ CAM_D0,        MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CAM_D1,        MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CAM_D2,        MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CAM_D3,        MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CAM_D4,        MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CAM_D5,        MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CAM_D6,        MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CAM_D7,        MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CAM_D8,        MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CAM_D9,        MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CAM_D10,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CAM_D11,       MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CAM_XCLKB,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ CAM_WEN,       MUXMODE4,   PULL_DISABLED,                INPUT  },
{ CAM_STROBE,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ CSI2_DX0,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CSI2_DY0,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CSI2_DX1,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ CSI2_DY1,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ MCBSP2_FSX,    MUXMODE0,   PULL_DISABLED,                INPUT  },
{ MCBSP2_CLKX,   MUXMODE0,   PULL_DISABLED,                INPUT  },
{ MCBSP2_DR,     MUXMODE0,   PULL_DISABLED,                INPUT  },
{ MCBSP2_DX,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ MMC1_CLK,      MUXMODE0,   PULL_UP_SELECTED,             OUTPUT },
{ MMC1_CMD,      MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ MMC1_DAT0,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ MMC1_DAT1,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ MMC1_DAT2,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ MMC1_DAT3,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ MMC1_DAT4,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ MMC1_DAT5,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ MMC1_DAT6,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ MMC1_DAT7,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ MMC2_CLK,      MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ MMC2_CMD,      MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ MMC2_DAT0,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ MMC2_DAT1,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ MMC2_DAT2,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ MMC2_DAT3,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ MMC2_DAT4,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ MMC2_DAT5,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ MMC2_DAT6,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ MMC2_DAT7,     MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ MCBSP3_DX,     MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ MCBSP3_DR,     MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ MCBSP3_CLKX,   MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ MCBSP3_FSX,    MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ UART2_CTS,     MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ UART2_RTS,     MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ UART2_TX,      MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ UART2_RX,      MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ UART1_TX,      MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ UART1_RTS,     MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ UART1_CTS,     MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ UART1_RX,      MUXMODE0,   PULL_DISABLED,                INPUT  },
{ MCBSP4_CLKX,   MUXMODE1,   PULL_DISABLED,                INPUT  },
{ MCBSP4_DR,     MUXMODE1,   PULL_DISABLED,                INPUT  },
{ MCBSP4_DX,     MUXMODE1,   PULL_DISABLED,                INPUT  },
{ MCBSP4_FSX,    MUXMODE1,   PULL_DISABLED,                INPUT  },
{ MCBSP1_CLKR,   MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ MCBSP1_FSR,    MUXMODE4,   PULL_UP_SELECTED,             OUTPUT },
{ MCBSP1_DX,     MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ MCBSP1_DR,     MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ MCBSP1_CLKS,   MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ MCBSP1_FSX,    MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ MCBSP1_CLKX,   MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ UART3_CTS_RCTX,MUXMODE0,   PULL_UP_SELECTED,                 INPUT  },
{ UART3_RTS_SD,  MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ UART3_RX_IRRX, MUXMODE0,   PULL_DISABLED,                INPUT  },
{ UART3_TX_IRTX, MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ HSUSB0_CLK,    MUXMODE0,   PULL_DISABLED,                INPUT  },
{ HSUSB0_STP,    MUXMODE0,   PULL_UP_SELECTED,             OUTPUT },
{ HSUSB0_DIR,    MUXMODE0,   PULL_DISABLED,                INPUT  },
{ HSUSB0_NXT,    MUXMODE0,   PULL_DISABLED,                INPUT  },
{ HSUSB0_DATA0,  MUXMODE0,   PULL_DISABLED,                INPUT  },
{ HSUSB0_DATA1,  MUXMODE0,   PULL_DISABLED,                INPUT  },
{ HSUSB0_DATA2,  MUXMODE0,   PULL_DISABLED,                INPUT  },
{ HSUSB0_DATA3,  MUXMODE0,   PULL_DISABLED,                INPUT  },
{ HSUSB0_DATA4,  MUXMODE0,   PULL_DISABLED,                INPUT  },
{ HSUSB0_DATA5,  MUXMODE0,   PULL_DISABLED,                INPUT  },
{ HSUSB0_DATA6,  MUXMODE0,   PULL_DISABLED,                INPUT  },
{ HSUSB0_DATA7,  MUXMODE0,   PULL_DISABLED,                INPUT  },
{ I2C1_SCL,      MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ I2C1_SDA,      MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ I2C2_SCL,      MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ I2C2_SDA,      MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ I2C3_SCL,      MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ I2C3_SDA,      MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ HDQ_SIO,       MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ MCSPI1_CLK,    MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ MCSPI1_SIMO,   MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ MCSPI1_SOMI,   MUXMODE0,   PULL_DISABLED,                INPUT  },
{ MCSPI1_CS0,    MUXMODE0,   PULL_UP_SELECTED,                 INPUT  },
{ MCSPI1_CS1,    MUXMODE0,   PULL_UP_SELECTED,                 OUTPUT },
{ MCSPI1_CS2,    MUXMODE4,   PULL_DISABLED,                OUTPUT },
{ MCSPI1_CS3,    MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ MCSPI2_CLK,    MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ MCSPI2_SIMO,   MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ MCSPI2_SOMI,   MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ MCSPI2_CS0,    MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ MCSPI2_CS1,    MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ SYS_NIRQ,      MUXMODE0,   PULL_UP_SELECTED,             INPUT  },
{ SYS_CLKOUT2,   MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ ETK_CLK,       MUXMODE3,   PULL_UP_SELECTED,             OUTPUT },
{ ETK_CTL,       MUXMODE3,   PULL_UP_SELECTED,             OUTPUT },
{ ETK_D0,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ ETK_D1,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ ETK_D2,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ ETK_D3,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ ETK_D4,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ ETK_D5,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ ETK_D6,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ ETK_D7,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ ETK_D8,        MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ ETK_D9,        MUXMODE4,   PULL_UP_SELECTED,             INPUT  },
{ ETK_D10,       MUXMODE3,   PULL_UP_SELECTED,             OUTPUT },
{ ETK_D11,       MUXMODE3,   PULL_UP_SELECTED,             OUTPUT },
{ ETK_D12,       MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ ETK_D13,       MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ ETK_D14,       MUXMODE3,   PULL_UP_SELECTED,             INPUT  },
{ ETK_D15,       MUXMODE3,   PULL_UP_SELECTED,             INPUT  }

-};



-PAD_CONFIGURATION PadConfigurationTableAbc[] = {

{ DSS_DATA18,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA19,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA20,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA21,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA22,    MUXMODE0,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA23,    MUXMODE0,   PULL_DISABLED,                OUTPUT }

-};



-PAD_CONFIGURATION PadConfigurationTableXm[] = {

{ DSS_DATA18,    MUXMODE3,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA19,    MUXMODE3,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA20,    MUXMODE3,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA21,    MUXMODE3,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA22,    MUXMODE3,   PULL_DISABLED,                OUTPUT },
{ DSS_DATA23,    MUXMODE3,   PULL_DISABLED,                OUTPUT },
{ SYS_BOOT0,     MUXMODE3,   PULL_DISABLED,                OUTPUT },
{ SYS_BOOT1,     MUXMODE3,   PULL_DISABLED,                OUTPUT },
{ SYS_BOOT3,     MUXMODE3,   PULL_DISABLED,                OUTPUT },
{ SYS_BOOT4,     MUXMODE3,   PULL_DISABLED,                OUTPUT },
{ SYS_BOOT5,     MUXMODE3,   PULL_DISABLED,                OUTPUT },
{ SYS_BOOT6,     MUXMODE3,   PULL_DISABLED,                OUTPUT }

-};



-VOID
-PadConfiguration (

BEAGLEBOARD_REVISION Revision
)

-{

UINTN             Index;
UINT16            PadConfiguration;
PAD_CONFIGURATION *BoardConfiguration;
UINTN             NumPinsToConfigure;

for (Index = 0; Index < NUM_PINS_SHARED; Index++) {
// Set up Pad configuration for particular pin.
PadConfiguration =  (PadConfigurationTableShared[Index].MuxMode << MUXMODE_OFFSET);
PadConfiguration |= (PadConfigurationTableShared[Index].PullConfig << PULL_CONFIG_OFFSET);
PadConfiguration |= (PadConfigurationTableShared[Index].InputEnable << INPUTENABLE_OFFSET);

// Configure the pin with specific Pad configuration.
MmioWrite16(PadConfigurationTableShared[Index].Pin, PadConfiguration);
}

if (Revision == REVISION_XM) {
BoardConfiguration = PadConfigurationTableXm;
NumPinsToConfigure = NUM_PINS_XM;
} else {
BoardConfiguration = PadConfigurationTableAbc;
NumPinsToConfigure = NUM_PINS_ABC;
}

for (Index = 0; Index < NumPinsToConfigure; Index++) {
//Set up Pad configuration for particular pin.
PadConfiguration =  (BoardConfiguration[Index].MuxMode << MUXMODE_OFFSET);
PadConfiguration |= (BoardConfiguration[Index].PullConfig << PULL_CONFIG_OFFSET);
PadConfiguration |= (BoardConfiguration[Index].InputEnable << INPUTENABLE_OFFSET);

//Configure the pin with specific Pad configuration.
MmioWrite16(BoardConfiguration[Index].Pin, PadConfiguration);
}

-}
diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.c b/Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.c
deleted file mode 100644
index 46204a4386b6..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/** @file

Add custom commands for BeagleBoard development.

Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include <PiDxe.h>
-#include <Library/ArmLib.h>
-#include <Library/CacheMaintenanceLib.h>
-#include <Library/EblCmdLib.h>
-#include <Library/BaseLib.h>
-#include <Library/DebugLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiRuntimeServicesTableLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiLib.h>
-#include <Library/PcdLib.h>
-#include <Library/EfiFileLib.h>
-#include <Library/ArmDisassemblerLib.h>
-#include <Library/PeCoffGetEntryPointLib.h>
-#include <Library/PerformanceLib.h>
-#include <Library/TimerLib.h>



-#include <Guid/DebugImageInfoTable.h>



-#include <Protocol/DebugSupport.h>
-#include <Protocol/LoadedImage.h>



-/**

Simple arm disassembler via a library

Argv[0] - symboltable
Argv[1] - Optional quoted format string
Argv[2] - Optional flag

@param  Argc   Number of command arguments in Argv
@param  Argv   Array of strings that represent the parsed command line.
            Argv[0] is the command name



@return EFI_SUCCESS


-**/
-EFI_STATUS
-EblSymbolTable (

IN UINTN  Argc,
IN CHAR8  **Argv
)

-{

EFI_STATUS                        Status;
EFI_DEBUG_IMAGE_INFO_TABLE_HEADER *DebugImageTableHeader = NULL;
EFI_DEBUG_IMAGE_INFO              *DebugTable;
UINTN                             Entry;
CHAR8                             *Format;
CHAR8                             *Pdb;
UINT32                            PeCoffSizeOfHeaders;
UINT32                            ImageBase;
BOOLEAN                           Elf;

// Need to add lots of error checking on the passed in string
// Default string is for RealView debugger or gdb depending on toolchain used.
if (Argc > 1) {
Format = Argv[1];
} else {

-#if __GNUC__

// Assume gdb
Format = "add-symbol-file %a 0x%x";

-#else

// Default to RVCT
Format = "load /a /ni /np %a &0x%x";

-#endif

}
Elf = (Argc > 2) ? FALSE : TRUE;

Status = EfiGetSystemConfigurationTable (&gEfiDebugImageInfoTableGuid, (VOID **)&DebugImageTableHeader);
if (EFI_ERROR (Status)) {
return Status;
}

DebugTable = DebugImageTableHeader->EfiDebugImageInfoTable;
if (DebugTable == NULL) {
return EFI_SUCCESS;
}

for (Entry = 0; Entry < DebugImageTableHeader->TableSize; Entry++, DebugTable++) {
if (DebugTable->NormalImage != NULL) {
 if ((DebugTable->NormalImage->ImageInfoType == EFI_DEBUG_IMAGE_INFO_TYPE_NORMAL) && (DebugTable->NormalImage->LoadedImageProtocolInstance != NULL)) {


   ImageBase = (UINT32)DebugTable->NormalImage->LoadedImageProtocolInstance->ImageBase;


   PeCoffSizeOfHeaders = PeCoffGetSizeOfHeaders ((VOID *)(UINTN)ImageBase);


   Pdb = PeCoffLoaderGetPdbPointer (DebugTable->NormalImage->LoadedImageProtocolInstance->ImageBase);


   if (Pdb != NULL) {


     if (Elf) {


       // ELF and Mach-O images don't include the header so the linked address does not include header


       ImageBase += PeCoffSizeOfHeaders;


     }


     AsciiPrint (Format, Pdb, ImageBase);


     AsciiPrint ("\n");


   } else {


   }


 }


}
}

return EFI_SUCCESS;

-}




-/**

Simple arm disassembler via a library

Argv[0] - disasm
Argv[1] - Address to start disassembling from
ARgv[2] - Number of instructions to disassembly (optional)

@param  Argc   Number of command arguments in Argv
@param  Argv   Array of strings that represent the parsed command line.
            Argv[0] is the command name



@return EFI_SUCCESS


-**/
-EFI_STATUS
-EblDisassembler (

IN UINTN  Argc,
IN CHAR8  **Argv
)

-{

UINT8   *Ptr, *CurrentAddress;
UINT32  Address;
UINT32  Count;
CHAR8   Buffer[80];
UINT32  ItBlock;

if (Argc < 2) {
return EFI_INVALID_PARAMETER;
}

Address = AsciiStrHexToUintn (Argv[1]);
Count   = (Argc > 2) ? (UINT32)AsciiStrHexToUintn (Argv[2]) : 20;

Ptr = (UINT8 *)(UINTN)Address;
ItBlock = 0;
do {
CurrentAddress = Ptr;
DisassembleInstruction (&Ptr, TRUE, TRUE, &ItBlock, Buffer, sizeof (Buffer));
AsciiPrint ("0x%08x: %a\n", CurrentAddress, Buffer);
} while (Count-- > 0);


return EFI_SUCCESS;

-}




-CHAR8 *
-ImageHandleToPdbFileName (

IN  EFI_HANDLE    Handle
)

-{

EFI_STATUS                  Status;
EFI_LOADED_IMAGE_PROTOCOL   *LoadedImage;
CHAR8                       *Pdb;
CHAR8                       *StripLeading;

Status = gBS->HandleProtocol (Handle, &gEfiLoadedImageProtocolGuid, (VOID **)&LoadedImage);
if (EFI_ERROR (Status)) {
return "";
}

Pdb = PeCoffLoaderGetPdbPointer (LoadedImage->ImageBase);
StripLeading = AsciiStrStr (Pdb, "\ARM\");
if (StripLeading == NULL) {
StripLeading = AsciiStrStr (Pdb, "/ARM/");
if (StripLeading == NULL) {
 return Pdb;


}
}
// Hopefully we hacked off the unneeded part
return (StripLeading + 5);

-}




-CHAR8 *mTokenList[] = {

"SEC",
"PEI",
"DXE",
"BDS",
NULL

-};



-/**

Simple arm disassembler via a library

Argv[0] - disasm
Argv[1] - Address to start disassembling from
ARgv[2] - Number of instructions to disassembly (optional)

@param  Argc   Number of command arguments in Argv
@param  Argv   Array of strings that represent the parsed command line.
            Argv[0] is the command name



@return EFI_SUCCESS


-**/
-EFI_STATUS
-EblPerformance (

IN UINTN  Argc,
IN CHAR8  **Argv
)

-{

UINTN       Key;
CONST VOID  *Handle;
CONST CHAR8 *Token, *Module;
UINT64      Start, Stop, TimeStamp;
UINT64      Delta, TicksPerSecond, Milliseconds, Microseconds;
UINTN       Index;

TicksPerSecond = GetPerformanceCounterProperties (NULL, NULL);

Key       = 0;
do {
Key = GetPerformanceMeasurement (Key, (CONST VOID **)&Handle, &Token, &Module, &Start, &Stop);
if (Key != 0) {
 if (AsciiStriCmp ("StartImage:", Token) == 0) {


   if (Stop == 0) {


     // The entry for EBL is still running so the stop time will be zero. Skip it


     AsciiPrint ("   running     %a\n", ImageHandleToPdbFileName ((EFI_HANDLE)Handle));


   } else {


     Delta = Stop - Start;


     Microseconds = DivU64x64Remainder (MultU64x32 (Delta, 1000000), TicksPerSecond, NULL);


     AsciiPrint ("%10ld us  %a\n", Microseconds, ImageHandleToPdbFileName ((EFI_HANDLE)Handle));


   }


 }


}
} while (Key != 0);

AsciiPrint ("\n");

TimeStamp = 0;
Key       = 0;
do {
Key = GetPerformanceMeasurement (Key, (CONST VOID **)&Handle, &Token, &Module, &Start, &Stop);
if (Key != 0) {
 for (Index = 0; mTokenList[Index] != NULL; Index++) {


   if (AsciiStriCmp (mTokenList[Index], Token) == 0) {


     Delta = Stop - Start;


     TimeStamp += Delta;


     Milliseconds = DivU64x64Remainder (MultU64x32 (Delta, 1000), TicksPerSecond, NULL);


     AsciiPrint ("%6a %6ld ms\n", Token, Milliseconds);


     break;


   }


 }


}
} while (Key != 0);

AsciiPrint ("Total Time = %ld ms\n\n", DivU64x64Remainder (MultU64x32 (TimeStamp, 1000), TicksPerSecond, NULL));

return EFI_SUCCESS;

-}




-GLOBAL_REMOVE_IF_UNREFERENCED const EBL_COMMAND_TABLE mLibCmdTemplate[] =
-{

{
"disasm address [count]",
" disassemble count instructions",
NULL,
EblDisassembler
},
{
"performance",
" Display boot performance info",
NULL,
EblPerformance
},
{
"symboltable ["format string"] [PECOFF]",
" show symbol table commands for debugger",
NULL,
EblSymbolTable
}

-};




-VOID
-EblInitializeExternalCmd (

VOID
)

-{

EblAddCommands (mLibCmdTemplate, sizeof (mLibCmdTemplate)/sizeof (EBL_COMMAND_TABLE));
return;

-}
diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.inf b/Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.inf
deleted file mode 100644
index a79448c0e95b..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Library/EblCmdLib/EblCmdLib.inf
+++ /dev/null
@@ -1,53 +0,0 @@
-#/** @file
-# Component description file for the entry point to a EFIDXE Drivers
-#
-# Library to abstract Framework extensions that conflict with UEFI 2.0 Specification
-# Copyright (c) 2007 - 2007, Intel Corporation. All rights reserved.<BR>
-#
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution. The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = BeagleBoardEblCmdLib
FILE_GUID                      = ea62bdc3-1063-425f-8851-98cb47f213a8
MODULE_TYPE                    = UEFI_DRIVER
VERSION_STRING                 = 1.0
LIBRARY_CLASS                  = EblCmdLib|DXE_DRIVER UEFI_APPLICATION UEFI_DRIVER



-#
-# The following information is for reference only and not required by the build tools.
-#
-#  VALID_ARCHITECTURES           = IA32 X64 IPF EBC
-#



-[Sources.common]

EblCmdLib.c


-[Packages]

MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
ArmPkg/ArmPkg.dec


-[LibraryClasses]

BaseLib
DebugLib
ArmDisassemblerLib
PerformanceLib
TimerLib


-[Protocols]

gEfiDebugSupportProtocolGuid
gEfiLoadedImageProtocolGuid


-[Guids]

gEfiDebugImageInfoTableGuid

diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.c b/Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.c
deleted file mode 100644
index 82a2957dc97e..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/** @file

Basic serial IO abstaction for GDB

Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/



-#include <Uefi.h>
-#include <Library/GdbSerialLib.h>
-#include <Library/PcdLib.h>
-#include <Library/IoLib.h>
-#include <Library/DebugLib.h>
-#include <Library/OmapLib.h>
-#include <Omap3530/Omap3530.h>



-RETURN_STATUS
-EFIAPI
-GdbSerialLibConstructor (

IN EFI_HANDLE        ImageHandle,
IN EFI_SYSTEM_TABLE  *SystemTable
)

-{

return RETURN_SUCCESS;

-}



-RETURN_STATUS
-EFIAPI
-GdbSerialInit (

IN UINT64     BaudRate,
IN UINT8      Parity,
IN UINT8      DataBits,
IN UINT8      StopBits
)

-{

return RETURN_SUCCESS;

-}



-BOOLEAN
-EFIAPI
-GdbIsCharAvailable (

VOID
)

-{

UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG;

if ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_NOT_EMPTY) {
return TRUE;
} else {
return FALSE;
}

-}



-CHAR8
-EFIAPI
-GdbGetChar (

VOID
)

-{

UINT32  LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG;
UINT32  RBR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_RBR_REG;
CHAR8   Char;

while ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_EMPTY);
Char = MmioRead8(RBR);

return Char;

-}



-VOID
-EFIAPI
-GdbPutChar (

IN  CHAR8   Char
)

-{

UINT32  LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG;
UINT32  THR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_THR_REG;

while ((MmioRead8(LSR) & UART_LSR_TX_FIFO_E_MASK) == UART_LSR_TX_FIFO_E_NOT_EMPTY);
MmioWrite8(THR, Char);

-}



-VOID
-GdbPutString (

IN CHAR8  *String
)

-{

while (*String != '\0') {
GdbPutChar (*String);
String++;
}

-}






diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.inf b/Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.inf
deleted file mode 100644
index e219ea256f26..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Library/GdbSerialLib/GdbSerialLib.inf
+++ /dev/null
@@ -1,41 +0,0 @@
-#/** @file
-#
-#  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = GdbSerialLib
FILE_GUID                      = E2423349-EF5D-439B-95F5-8B8D8E3B443F
MODULE_TYPE                    = UEFI_DRIVER
VERSION_STRING                 = 1.0
LIBRARY_CLASS                  = GdbSerialLib

CONSTRUCTOR                    = GdbSerialLibConstructor



-[Sources.common]

GdbSerialLib.c



-[Packages]

MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[LibraryClasses]

DebugLib
IoLib
OmapLib


-[FixedPcd]

gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart


diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.c b/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.c
deleted file mode 100644
index 6b7879b02bd6..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/** @file

Do a generic Cold Reset for OMAP3550 and BeagleBoard specific Warm reset

Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/




-#include <Uefi.h>



-#include <Library/ArmLib.h>
-#include <Library/CacheMaintenanceLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/IoLib.h>
-#include <Library/PcdLib.h>
-#include <Library/DebugLib.h>
-#include <Library/UefiBootServicesTableLib.h>



-#include <Omap3530/Omap3530.h>




-VOID
-ShutdownEfi (

VOID
)

-{

EFI_STATUS              Status;
UINTN                   MemoryMapSize;
EFI_MEMORY_DESCRIPTOR   *MemoryMap;
UINTN                   MapKey;
UINTN                   DescriptorSize;
UINTN                   DescriptorVersion;
UINTN                   Pages;

MemoryMap = NULL;
MemoryMapSize = 0;
do {
Status = gBS->GetMemoryMap (
               &MemoryMapSize,


               MemoryMap,


               &MapKey,


               &DescriptorSize,


               &DescriptorVersion


               );


if (Status == EFI_BUFFER_TOO_SMALL) {

 Pages = EFI_SIZE_TO_PAGES (MemoryMapSize) + 1;


 MemoryMap = AllocatePages (Pages);



 //


 // Get System MemoryMap


 //


 Status = gBS->GetMemoryMap (


                 &MemoryMapSize,


                 MemoryMap,


                 &MapKey,


                 &DescriptorSize,


                 &DescriptorVersion


                 );


 // Don't do anything between the GetMemoryMap() and ExitBootServices()


 if (!EFI_ERROR (Status)) {


   Status = gBS->ExitBootServices (gImageHandle, MapKey);


   if (EFI_ERROR (Status)) {


     FreePages (MemoryMap, Pages);


     MemoryMap = NULL;


     MemoryMapSize = 0;


   }


 }


}
} while (EFI_ERROR (Status));

//Clean and invalidate caches.
WriteBackInvalidateDataCache();
InvalidateInstructionCache();

//Turning off Caches and MMU
ArmDisableDataCache ();
ArmDisableInstructionCache ();
ArmDisableMmu ();

-}



-typedef
-VOID
-(EFIAPI *CALL_STUB)(

VOID

-);




-/**

Resets the entire platform.

@param  ResetType             The type of reset to perform.
@param  ResetStatus           The status code for the reset.
@param  DataSize              The size, in bytes, of WatchdogData.
@param  ResetData             For a ResetType of EfiResetCold, EfiResetWarm, or
                           EfiResetShutdown the data buffer starts with a Null-terminated


                           Unicode string, optionally followed by additional binary data.




-**/
-EFI_STATUS
-EFIAPI
-LibResetSystem (

IN EFI_RESET_TYPE   ResetType,
IN EFI_STATUS       ResetStatus,
IN UINTN            DataSize,
IN CHAR16           *ResetData OPTIONAL
)

-{

CALL_STUB   StartOfFv;

if (ResetData != NULL) {
DEBUG((EFI_D_ERROR, "%s", ResetData));
}

ShutdownEfi ();

switch (ResetType) {
case EfiResetWarm:
//Perform warm reset of the system by jumping to the begining of the FV
StartOfFv = (CALL_STUB)(UINTN)PcdGet64 (PcdFvBaseAddress);
StartOfFv ();
break;
case EfiResetCold:
case EfiResetShutdown:
default:
//Perform cold reset of the system.
MmioOr32 (PRM_RSTCTRL, RST_DPLL3);
while ((MmioRead32(PRM_RSTST) & GLOBAL_COLD_RST) != 0x1);
break;
}

// If the reset didn't work, return an error.
ASSERT (FALSE);
return EFI_DEVICE_ERROR;

-}





-/**

Initialize any infrastructure required for LibResetSystem () to function.

@param  ImageHandle   The firmware allocated handle for the EFI image.
@param  SystemTable   A pointer to the EFI System Table.

@retval EFI_SUCCESS   The constructor always returns EFI_SUCCESS.


-**/
-EFI_STATUS
-EFIAPI
-LibInitializeResetSystem (

IN EFI_HANDLE        ImageHandle,
IN EFI_SYSTEM_TABLE  *SystemTable
)

-{

return EFI_SUCCESS;

-}



diff --git a/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.inf b/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.inf
deleted file mode 100644
index 27bb8d1833a0..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Library/ResetSystemLib/ResetSystemLib.inf
+++ /dev/null
@@ -1,49 +0,0 @@
-#/** @file
-# Reset System lib to make it easy to port new platforms
-#
-# Copyright (c) 2008, Apple Inc. All rights reserved.<BR>
-#
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution. The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-#**/



-[Defines]

INF_VERSION                    = 0x00010005
BASE_NAME                      = BeagleBoardResetSystemLib
FILE_GUID                      = 781371a2-3fdd-41d4-96a1-7b34cbc9e895
MODULE_TYPE                    = BASE
VERSION_STRING                 = 1.0
LIBRARY_CLASS                  = EfiResetSystemLib



-[Sources.common]

ResetSystemLib.c


-[Packages]

MdePkg/MdePkg.dec
ArmPkg/ArmPkg.dec
EmbeddedPkg/EmbeddedPkg.dec
OpenPlatformPkg/Chips/TexasInstruments/Omap35xx/Omap35xxPkg.dec


-[Pcd.common]

gArmTokenSpaceGuid.PcdCpuResetAddress
gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress


-[LibraryClasses]

DebugLib
ArmLib
CacheMaintenanceLib
MemoryAllocationLib
UefiRuntimeServicesTableLib
TimerLib
UefiLib
UefiBootServicesTableLib


-[Pcd]

gArmTokenSpaceGuid.PcdFvBaseAddress

diff --git a/Platforms/TexasInstruments/BeagleBoard/License.txt b/Platforms/TexasInstruments/BeagleBoard/License.txt
deleted file mode 100755
index 05dbd3606dcc..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/License.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Copyright (c) 2009-2010, Apple Inc. All rights reserved.
-Copyright (c) 2011-2012, ARM Limited. All rights reserved.



-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:



-* Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

-* Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.


-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
diff --git a/Platforms/TexasInstruments/BeagleBoard/Tools/GNUmakefile b/Platforms/TexasInstruments/BeagleBoard/Tools/GNUmakefile
deleted file mode 100644
index ed09e2bcde07..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Tools/GNUmakefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-#  
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#



-CC     = gcc
-CFLAGS = -g



-generate_image: generate_image.c

$(CC) $(CCFLAGS) $(LDFLAGS) -o generate_image generate_image.c




-clean:

rm -f generate_image generate_image.exe

diff --git a/Platforms/TexasInstruments/BeagleBoard/Tools/generate_image.c b/Platforms/TexasInstruments/BeagleBoard/Tools/generate_image.c
deleted file mode 100644
index 7fc3faba10ca..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Tools/generate_image.c
+++ /dev/null
@@ -1,408 +0,0 @@
-/** @file

The data structures in this code come from:
OMAP35x Applications Processor Technical Reference Manual chapter 25
OMAP34xx Multimedia Device Technical Reference Manual chapter 26.4.8.

You should use the OMAP35x manual when possible. Some things, like SectionKey,
are not defined in the OMAP35x manual and you have to use the OMAP34xx manual
to find the data.

Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


-**/
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/stat.h>





-//TOC structure as defined by OMAP35XX TRM.
-typedef struct {

unsigned int  Start;
unsigned int  Size;
unsigned int  Reserved1;
unsigned int  Reserved2;
unsigned int  Reserved3;
unsigned char Filename[12];

-} TOC_DATA;



-//NOTE: OMAP3430 TRM has CHSETTINGS and CHRAM structures.
-typedef struct {

unsigned int   SectionKey;
unsigned char  Valid;
unsigned char  Version;
unsigned short Reserved;
unsigned int   Flags;
unsigned int   PRM_CLKSRC_CTRL;
unsigned int   PRM_CLKSEL;
unsigned int   CM_CLKSEL1_EMU;
unsigned int   CM_CLKSEL_CORE;
unsigned int   CM_CLKSEL_WKUP;
unsigned int   CM_CLKEN_PLL_DPLL3;
unsigned int   CM_AUTOIDLE_PLL_DPLL3;
unsigned int   CM_CLKSEL1_PLL;
unsigned int   CM_CLKEN_PLL_DPLL4;
unsigned int   CM_AUTOIDLE_PLL_DPLL4;
unsigned int   CM_CLKSEL2_PLL;
unsigned int   CM_CLKSEL3_PLL;
unsigned int   CM_CLKEN_PLL_MPU;
unsigned int   CM_AUTOIDLE_PLL_MPU;
unsigned int   CM_CLKSEL1_PLL_MPU;
unsigned int   CM_CLKSEL2_PLL_MPU;
unsigned int   CM_CLKSTCTRL_MPU;

-} CHSETTINGS_DATA;



-typedef struct {

unsigned int   SectionKey;
unsigned char  Valid;
unsigned char  Reserved1;
unsigned char  Reserved2;
unsigned char  Reserved3;
unsigned short SDRC_SYSCONFIG_LSB;
unsigned short SDRC_CS_CFG_LSB;
unsigned short SDRC_SHARING_LSB;
unsigned short SDRC_ERR_TYPE_LSB;
unsigned int   SDRC_DLLA_CTRL;
unsigned short Reserved4;
unsigned short Reserved5;
unsigned int   SDRC_POWER;
unsigned short MEMORY_TYPE_CS0;
unsigned short Reserved6;
unsigned int   SDRC_MCFG_0;
unsigned short SDRC_MR_0_LSB;
unsigned short SDRC_EMR1_0_LSB;
unsigned short SDRC_EMR2_0_LSB;
unsigned short SDRC_EMR3_0_LSB;
unsigned int   SDRC_ACTIM_CTRLA_0;
unsigned int   SDRC_ACTIM_CTRLB_0;
unsigned int   SDRC_RFRCTRL_0;
unsigned short MEMORY_TYPE_CS1;
unsigned short Reserved7;
unsigned int   SDRC_MCFG_1;
unsigned short SDRC_MR_1_LSB;
unsigned short SDRC_EMR1_1_LSB;
unsigned short SDRC_EMR2_1_LSB;
unsigned short SDRC_EMR3_1_LSB;
unsigned int   SDRC_ACTIM_CTRLA_1;
unsigned int   SDRC_ACTIM_CTRLB_1;
unsigned int   SDRC_RFRCTRL_1;
unsigned int   Reserved8;
unsigned short Flags;
unsigned short Reserved9;

-} CHRAM_DATA;



-#define CHSETTINGS_START      0xA0
-#define CHSETTINGS_SIZE       0x50
-#define CHRAM_START           0xF0
-#define CHRAM_SIZE            0x5C
-#define CLOSING_TOC_ITEM_SIZE 4



-unsigned char gConfigurationHeader[512];
-unsigned int  gImageExecutionAddress;
-char          *gInputImageFile = NULL;
-char          *gOutputImageFile = NULL;
-char          *gDataFile = NULL;



-static
-void
-PrintUsage (

void
)

-{

printf("Usage..\n");

-}



-static
-void
-PopulateCHSETTINGSData (

FILE            *DataFile,
CHSETTINGS_DATA *CHSETTINGSData
)

-{

unsigned int Value;

CHSETTINGSData->SectionKey            = 0xC0C0C0C1;
CHSETTINGSData->Valid                 = 0x1;
CHSETTINGSData->Version               = 0x1;
CHSETTINGSData->Reserved              = 0x00;
CHSETTINGSData->Flags                 = 0x050001FD;

//General clock settings.
fscanf(DataFile, "PRM_CLKSRC_CTRL=0x%08x\n", &Value);
CHSETTINGSData->PRM_CLKSRC_CTRL = Value;
fscanf(DataFile, "PRM_CLKSEL=0x%08x\n", &Value);
CHSETTINGSData->PRM_CLKSEL = Value;
fscanf(DataFile, "CM_CLKSEL1_EMU=0x%08x\n", &Value);
CHSETTINGSData->CM_CLKSEL1_EMU = Value;

//Clock configuration
fscanf(DataFile, "CM_CLKSEL_CORE=0x%08x\n", &Value);
CHSETTINGSData->CM_CLKSEL_CORE = Value;
fscanf(DataFile, "CM_CLKSEL_WKUP=0x%08x\n", &Value);
CHSETTINGSData->CM_CLKSEL_WKUP = Value;

//DPLL3 (Core) settings
fscanf(DataFile, "CM_CLKEN_PLL_DPLL3=0x%08x\n", &Value);
CHSETTINGSData->CM_CLKEN_PLL_DPLL3 = Value;
fscanf(DataFile, "CM_AUTOIDLE_PLL_DPLL3=0x%08x\n", &Value);
CHSETTINGSData->CM_AUTOIDLE_PLL_DPLL3 = Value;
fscanf(DataFile, "CM_CLKSEL1_PLL=0x%08x\n", &Value);
CHSETTINGSData->CM_CLKSEL1_PLL = Value;

//DPLL4 (Peripheral) settings
fscanf(DataFile, "CM_CLKEN_PLL_DPLL4=0x%08x\n", &Value);
CHSETTINGSData->CM_CLKEN_PLL_DPLL4 = Value;
fscanf(DataFile, "CM_AUTOIDLE_PLL_DPLL4=0x%08x\n", &Value);
CHSETTINGSData->CM_AUTOIDLE_PLL_DPLL4 = Value;
fscanf(DataFile, "CM_CLKSEL2_PLL=0x%08x\n", &Value);
CHSETTINGSData->CM_CLKSEL2_PLL = Value;
fscanf(DataFile, "CM_CLKSEL3_PLL=0x%08x\n", &Value);
CHSETTINGSData->CM_CLKSEL3_PLL = Value;

//DPLL1 (MPU) settings
fscanf(DataFile, "CM_CLKEN_PLL_MPU=0x%08x\n", &Value);
CHSETTINGSData->CM_CLKEN_PLL_MPU = Value;
fscanf(DataFile, "CM_AUTOIDLE_PLL_MPU=0x%08x\n", &Value);
CHSETTINGSData->CM_AUTOIDLE_PLL_MPU = Value;
fscanf(DataFile, "CM_CLKSEL1_PLL_MPU=0x%08x\n", &Value);
CHSETTINGSData->CM_CLKSEL1_PLL_MPU = Value;
fscanf(DataFile, "CM_CLKSEL2_PLL_MPU=0x%08x\n", &Value);
CHSETTINGSData->CM_CLKSEL2_PLL_MPU = Value;
fscanf(DataFile, "CM_CLKSTCTRL_MPU=0x%08x\n", &Value);
CHSETTINGSData->CM_CLKSTCTRL_MPU = Value;

-}



-static
-void
-PopulateCHRAMData (

FILE       *DataFile,
CHRAM_DATA *CHRAMData
)

-{

unsigned int Value;

CHRAMData->SectionKey         = 0xC0C0C0C2;
CHRAMData->Valid              = 0x1;

fscanf(DataFile, "SDRC_SYSCONFIG_LSB=0x%04x\n", &Value);
CHRAMData->SDRC_SYSCONFIG_LSB = Value;
fscanf(DataFile, "SDRC_CS_CFG_LSB=0x%04x\n", &Value);
CHRAMData->SDRC_CS_CFG_LSB    = Value;
fscanf(DataFile, "SDRC_SHARING_LSB=0x%04x\n", &Value);
CHRAMData->SDRC_SHARING_LSB   = Value;
fscanf(DataFile, "SDRC_ERR_TYPE_LSB=0x%04x\n", &Value);
CHRAMData->SDRC_ERR_TYPE_LSB  = Value;
fscanf(DataFile, "SDRC_DLLA_CTRL=0x%08x\n", &Value);
CHRAMData->SDRC_DLLA_CTRL     = Value;
fscanf(DataFile, "SDRC_POWER=0x%08x\n", &Value);
CHRAMData->SDRC_POWER         = Value;
fscanf(DataFile, "MEMORY_TYPE_CS0=0x%04x\n", &Value);
CHRAMData->MEMORY_TYPE_CS0    = Value;
fscanf(DataFile, "SDRC_MCFG_0=0x%08x\n", &Value);
CHRAMData->SDRC_MCFG_0        = Value;
fscanf(DataFile, "SDRC_MR_0_LSB=0x%04x\n", &Value);
CHRAMData->SDRC_MR_0_LSB      = Value;
fscanf(DataFile, "SDRC_EMR1_0_LSB=0x%04x\n", &Value);
CHRAMData->SDRC_EMR1_0_LSB    = Value;
fscanf(DataFile, "SDRC_EMR2_0_LSB=0x%04x\n", &Value);
CHRAMData->SDRC_EMR2_0_LSB    = Value;
fscanf(DataFile, "SDRC_EMR3_0_LSB=0x%04x\n", &Value);
CHRAMData->SDRC_EMR3_0_LSB    = Value;
fscanf(DataFile, "SDRC_ACTIM_CTRLA_0=0x%08x\n", &Value);
CHRAMData->SDRC_ACTIM_CTRLA_0 = Value;
fscanf(DataFile, "SDRC_ACTIM_CTRLB_0=0x%08x\n", &Value);
CHRAMData->SDRC_ACTIM_CTRLB_0 = Value;
fscanf(DataFile, "SDRC_RFRCTRL_0=0x%08x\n", &Value);
CHRAMData->SDRC_RFRCTRL_0     = Value;
fscanf(DataFile, "MEMORY_TYPE_CS1=0x%04x\n", &Value);
CHRAMData->MEMORY_TYPE_CS1    = Value;
fscanf(DataFile, "SDRC_MCFG_1=0x%08x\n", &Value);
CHRAMData->SDRC_MCFG_1        = Value;
fscanf(DataFile, "SDRC_MR_1_LSB=0x%04x\n", &Value);
CHRAMData->SDRC_MR_1_LSB      = Value;
fscanf(DataFile, "SDRC_EMR1_1_LSB=0x%04x\n", &Value);
CHRAMData->SDRC_EMR1_1_LSB    = Value;
fscanf(DataFile, "SDRC_EMR2_1_LSB=0x%04x\n", &Value);
CHRAMData->SDRC_EMR2_1_LSB    = Value;
fscanf(DataFile, "SDRC_EMR3_1_LSB=0x%04x\n", &Value);
CHRAMData->SDRC_EMR3_1_LSB    = Value;
fscanf(DataFile, "SDRC_ACTIM_CTRLA_1=0x%08x\n", &Value);
CHRAMData->SDRC_ACTIM_CTRLA_1 = Value;
fscanf(DataFile, "SDRC_ACTIM_CTRLB_1=0x%08x\n", &Value);
CHRAMData->SDRC_ACTIM_CTRLB_1 = Value;
fscanf(DataFile, "SDRC_RFRCTRL_1=0x%08x\n", &Value);
CHRAMData->SDRC_RFRCTRL_1     = Value;

CHRAMData->Flags              = 0x0003;

-}



-static
-void
-PrepareConfigurationHeader (

void
)

-{

TOC_DATA        Toc;
CHSETTINGS_DATA CHSETTINGSData;
CHRAM_DATA      CHRAMData;
unsigned int    ConfigurationHdrOffset = 0;
FILE            *DataFile;

// Open data file
DataFile = fopen(gDataFile, "rb");
if (DataFile == NULL) {
fprintf(stderr, "Can't open data file %s.\n", gDataFile);
exit(1);
}

//Initialize configuration header.
memset(gConfigurationHeader, 0x00, sizeof(gConfigurationHeader));

//CHSETTINGS TOC
memset(&Toc, 0x00, sizeof(TOC_DATA));
Toc.Start = CHSETTINGS_START;
Toc.Size = CHSETTINGS_SIZE;
strcpy((char *)Toc.Filename, (const char *)"CHSETTINGS");
memcpy(gConfigurationHeader + ConfigurationHdrOffset, &Toc, sizeof(TOC_DATA));

//Populate CHSETTINGS Data
memset(&CHSETTINGSData, 0x00, sizeof(CHSETTINGS_DATA));
PopulateCHSETTINGSData(DataFile, &CHSETTINGSData);
memcpy(gConfigurationHeader + Toc.Start, &CHSETTINGSData, Toc.Size);

//Adjust ConfigurationHdrOffset to point to next TOC
ConfigurationHdrOffset += sizeof(TOC_DATA);

//CHRAM TOC
memset(&Toc, 0x00, sizeof(TOC_DATA));
Toc.Start = CHRAM_START;
Toc.Size = CHRAM_SIZE;
strcpy((char *)Toc.Filename, (const char *)"CHRAM");
memcpy(gConfigurationHeader + ConfigurationHdrOffset, &Toc, sizeof(TOC_DATA));

//Populate CHRAM Data
memset(&CHRAMData, 0x00, sizeof(CHRAM_DATA));
PopulateCHRAMData(DataFile, &CHRAMData);
memcpy(gConfigurationHeader + Toc.Start, &CHRAMData, Toc.Size);

//Adjust ConfigurationHdrOffset to point to next TOC
ConfigurationHdrOffset += sizeof(TOC_DATA);

//Closing TOC item
memset(gConfigurationHeader + ConfigurationHdrOffset, 0xFF, CLOSING_TOC_ITEM_SIZE);
ConfigurationHdrOffset += CLOSING_TOC_ITEM_SIZE;

// Close data file
fclose(DataFile);

-}



-static
-void
-ConstructImage (

void
)

-{

FILE         *InputFile;
FILE         *OutputFile;
unsigned int InputImageFileSize;
struct       stat FileStat;
char         Ch;
unsigned int i;

InputFile = fopen(gInputImageFile, "rb");
if (InputFile == NULL) {
fprintf(stderr, "Can't open input file.\n");
exit(0);
}

// Get the size of the input image.
fstat(fileno(InputFile), &FileStat);
InputImageFileSize = FileStat.st_size;

OutputFile = fopen(gOutputImageFile, "wb");
if (OutputFile == NULL) {
fprintf(stderr, "Can't open output file %s.\n", gOutputImageFile);
exit(0);
}

// Write Configuration header
fwrite(gConfigurationHeader, 1, sizeof(gConfigurationHeader), OutputFile);

// Write image header (Input image size, execution address)
fwrite(&InputImageFileSize, 1, 4, OutputFile);
fwrite(&gImageExecutionAddress, 1, 4, OutputFile);

// Copy input image to the output file.
for (i = 0; i < InputImageFileSize; i++) {
fread(&Ch, 1, 1, InputFile);
fwrite(&Ch, 1, 1, OutputFile);
}

fclose(InputFile);
fclose(OutputFile);

-}




-int
-main (

int    argc,
char** argv
)

-{

char          Ch;
unsigned char *ptr;
int           i;
int           TwoArg;

if (argc == 1) {
PrintUsage ();
exit(1);
}

for (i=1; i < argc; i++) {
if (argv[i][0] == '-') {
 // TwoArg TRUE -E 0x123, FALSE -E0x1234


 TwoArg = (argv[i][2] != ' ');


 switch (argv[i][1]) {


   case 'E': /* Image execution address */


     gImageExecutionAddress = strtoul (TwoArg ? argv[i+1] : &argv[i][2], (char **)&ptr, 16);


     break;



   case 'I': /* Input image file */


     gInputImageFile = TwoArg ? argv[i+1] : &argv[i][2];


     break;



   case 'O': /* Output image file */


     gOutputImageFile = TwoArg ? argv[i+1] : &argv[i][2];


     break;



   case 'D': /* Data file */


     gDataFile = TwoArg ? argv[i+1] : &argv[i][2];


     break;



   default:


     abort ();


 }


}
}


//Prepare configuration header
PrepareConfigurationHeader ();

//Build image with configuration header + image header + image
ConstructImage ();

return 0;

-}
diff --git a/Platforms/TexasInstruments/BeagleBoard/Tools/makefile b/Platforms/TexasInstruments/BeagleBoard/Tools/makefile
deleted file mode 100755
index cf50b8f2cf12..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Tools/makefile
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-# Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-#  
-#  This program and the accompanying materials
-#  are licensed and made available under the terms and conditions of the BSD License
-#  which accompanies this distribution.  The full text of the license may be found at
-#  http://opensource.org/licenses/bsd-license.php
-#
-#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#



-all: GenerateImage replace



-GenerateImage: generate_image.c

$(CC) $(CCFLAGS) $(LDFLAGS) -o GenerateImage.exe generate_image.c




-replace: replace.c

$(CC) $(CCFLAGS) $(LDFLAGS) -o replace.exe replace.c




-clean:

del GenerateImage.exe generate_image.obj replace.exe replace.obj

diff --git a/Platforms/TexasInstruments/BeagleBoard/Tools/replace.c b/Platforms/TexasInstruments/BeagleBoard/Tools/replace.c
deleted file mode 100644
index 00f42495929b..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/Tools/replace.c
+++ /dev/null
@@ -1,146 +0,0 @@
-//
-// Quick hack to work around not having sed, or any other reasonable
-// way to edit a file from a script on Windows......
-//
-// Copyright (c) 2010, Apple Inc. All rights reserved.<BR>
-//
-//  This program and the accompanying materials
-//  are licensed and made available under the terms and conditions of the BSD License
-//  which accompanies this distribution.  The full text of the license may be found at
-//  http://opensource.org/licenses/bsd-license.php
-//
-//  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-//  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-//



-#include <stdio.h>
-#include <stdlib.h>
-#include <limits.h>



-#define TRUE  1
-#define FALSE 0



-typedef struct {

char  *Match;
int   MatchSize;
char  *Replace;

-} MATCH_PAIR;



-void
-Usage (char *Name)
-{

printf ("\n%s OldFile NewFile MatchString ReplaceString [MatchString2 ReplaceString2]*\n", Name);
printf ("    OldFile - Must be arg[1] File to search for MatchStrings\n");
printf ("    NewFile - Must be arg[2] File where MatchString has been replaced with ReplaceString\n");
printf ("    MatchString & ReplaceString. Required arguments.\n");
printf ("    More MatchString/ReplaceString pairs are supported.\n");

-}



-//
-// argv[1] - Old File
-// argv[2] - New File
-// argv[3+n] - Match String
-// argv[4+n] - Replace string
-int
-main (int argc, char **argv)
-{

FILE *In, *Out;
char *Key, *Replace;
int  c, i, n, Len, MaxLenKey = 0, MinLenKey = INT_MAX;
unsigned long  InFileSize, InFilePos;
MATCH_PAIR *Match;
int MaxMatch;
int ReadCount;
int Found;

if (argc < 5) {
fprintf (stderr, "Need at least two files and one Match/Replacement string pair\n");
Usage (argv[0]);
return -1;
} else if ((argc % 2) == 0) {
fprintf (stderr, "Match and Replace string must come in pairs\n");
return -4;
}

In  = fopen (argv[1], "r");
fseek (In, 0, SEEK_END);
InFileSize = ftell (In);
if (InFileSize == 0) {
fprintf (stderr, "Could not open %s\n", argv[1]);
return -6;
}
fseek (In, 0, SEEK_SET);


Out = fopen (argv[2], "w+");
if ((In == NULL) || (Out == NULL)) {
fprintf (stderr, "Could not open %s\n", argv[2]);
return -2;
}

MaxMatch = (argc - 2)/2;
Match = calloc (MaxMatch, sizeof (MATCH_PAIR));
if (Match == NULL) {
return -7;
}

for (n=0; n < MaxMatch; n++) {
Match[n].Match   = argv[3 + n*2];
Match[n].MatchSize = strlen (argv[3 + n*2]);
Match[n].Replace = argv[3 + n*2 + 1];
if (Match[n].MatchSize > MaxLenKey) {
 // Max size of match/replace string pair


 MaxLenKey = Match[n].MatchSize;


}
if (Match[n].MatchSize < MinLenKey) {
 MinLenKey = Match[n].MatchSize;


}
}

Key = malloc (MaxLenKey);
if (Key == NULL) {
return -5;
}

// Search for a match by reading every possition of the file
// into a buffer that is as big as the maximum search key size.
// Then we can search the keys for a match. If no match
// copy the old file character to the new file. If it is a match
// then copy the replacement string into the output file.
// This code assumes the file system is smart and caches the
// file in a buffer. So all the reads don't really hit the disk.
InFilePos = 0;
while (InFilePos < (InFileSize - MinLenKey)) {
fseek (In, InFilePos, SEEK_SET);
ReadCount = fread (Key, 1, MaxLenKey, In);
for (i = 0, Found = FALSE;i < MaxMatch; i++) {
 if (ReadCount >= Match[i].MatchSize) {


   if (!memcmp (Key, Match[i].Match, Match[i].MatchSize)) {


     InFilePos += (Match[i].MatchSize - 1);


     fputs (Match[i].Replace, Out);


     Found = TRUE;


     break;


   }


 }


}
if (!Found) {
 fputc (Key[0], Out);


}

InFilePos++;
}

// We stoped searching when we got to the point that we could no longer match.
// So the last few bytes of the file are not copied in the privous loop
fseek (In, InFilePos, SEEK_SET);
while ((c = fgetc (In)) != EOF) {
fputc (c, Out);
}

fclose (In);
fclose (Out);
free (Key);
free (Match);
return 0;

-}



diff --git a/Platforms/TexasInstruments/BeagleBoard/b.bat b/Platforms/TexasInstruments/BeagleBoard/b.bat
deleted file mode 100755
index 76ddea68bd90..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/b.bat
+++ /dev/null
@@ -1,68 +0,0 @@
-@REM Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-@REM This program and the accompanying materials
-@REM are licensed and made available under the terms and conditions of the BSD License
-@REM which accompanies this distribution.  The full text of the license may be found at
-@REM http://opensource.org/licenses/bsd-license.php
-@REM
-@REM THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-@REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-@REM



-@REM Example usage of this script. default is a DEBUG build
-@REM b
-@REM b clean
-@REM b release 
-@REM b release clean
-@REM b -v -y build.log



-ECHO OFF
-@REM Setup Build environment. Sets WORKSPACE and puts build in path
-CALL ..\edksetup.bat



-@REM Set for tools chain. Currently RVCT
-SET TARGET_TOOLS=RVCT
-SET TARGET=DEBUG



-@if /I "%1"=="RELEASE" (

@REM If 1st argument is release set TARGET to RELEASE and shift arguments to remove it
SET TARGET=RELEASE
shift /1

-)



-SET BUILD_ROOT=%WORKSPACE%\Build\BeagleBoard%TARGET%_%TARGET_TOOLS%



-@REM Build the Beagle Board firmware and creat an FD (FLASH Device) Image.
-CALL build -p BeagleBoardPkg\BeagleBoardPkg.dsc -a ARM -t %TARGET_TOOLS% -b %TARGET% %1 %2 %3 %4 %5 %6 %7 %8
-@if ERRORLEVEL 1 goto Exit



-@if /I "%1"=="CLEAN" goto Clean



-@REM
-@REM Ram starts at 0x80000000
-@REM OMAP 3530 TRM defines 0x80008208 as the entry point
-@REM The reset vector is caught by the mask ROM in the OMAP 3530 so that is why this entry 
-@REM point looks so strange. 
-@REM OMAP 3430 TRM section 26.4.8 has Image header information. (missing in OMAP 3530 TRM)
-@REM
-@cd Tools



-ECHO Building tools...
-CALL nmake



-ECHO Patching image with ConfigurationHeader.dat
-CALL GenerateImage -D ..\ConfigurationHeader.dat -E 0x80008208 -I %BUILD_ROOT%\FV\BEAGLEBOARD_EFI.fd -O %BUILD_ROOT%\FV\BeagleBoard_EFI_flashboot.fd



-ECHO Patching ..\Debugger_scripts ...
-SET DEBUGGER_SCRIPT=..\Debugger_scripts
-@for /f %%a IN ('dir /b %DEBUGGER_SCRIPT%*.inc %DEBUGGER_SCRIPT%*.cmm') do (

@CALL replace %DEBUGGER_SCRIPT%%%a %BUILD_ROOT%%%a ZZZZZZ %BUILD_ROOT% WWWWWW  %WORKSPACE%

-)



-cd ..
-:Exit
-EXIT /B



-:Clean
-cd Tools
-CALL nmake clean
-cd ..
diff --git a/Platforms/TexasInstruments/BeagleBoard/ba.bat b/Platforms/TexasInstruments/BeagleBoard/ba.bat
deleted file mode 100755
index 24a60e46d877..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/ba.bat
+++ /dev/null
@@ -1,68 +0,0 @@
-@REM Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
-@REM This program and the accompanying materials
-@REM are licensed and made available under the terms and conditions of the BSD License
-@REM which accompanies this distribution.  The full text of the license may be found at
-@REM http://opensource.org/licenses/bsd-license.php
-@REM
-@REM THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-@REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-@REM



-@REM Example usage of this script. default is a DEBUG build
-@REM b
-@REM b clean
-@REM b release 
-@REM b release clean
-@REM b -v -y build.log



-ECHO OFF
-@REM Setup Build environment. Sets WORKSPACE and puts build in path
-CALL ..\edksetup.bat



-@REM Set for tools chain. Currently ARMGCC
-SET TARGET_TOOLS=ARMGCC
-SET TARGET=DEBUG



-@if /I "%1"=="RELEASE" (

@REM If 1st argument is release set TARGET to RELEASE and shift arguments to remove it
SET TARGET=RELEASE
shift /1

-)



-SET BUILD_ROOT=%WORKSPACE%\Build\BeagleBoard%TARGET%_%TARGET_TOOLS%



-@REM Build the Beagle Board firmware and creat an FD (FLASH Device) Image.
-CALL build -p BeagleBoardPkg\BeagleBoardPkg.dsc -a ARM -t %TARGET_TOOLS% -b %TARGET% %1 %2 %3 %4 %5 %6 %7 %8
-@if ERRORLEVEL 1 goto Exit



-@if /I "%1"=="CLEAN" goto Clean



-@REM
-@REM Ram starts at 0x80000000
-@REM OMAP 3530 TRM defines 0x80008208 as the entry point
-@REM The reset vector is caught by the mask ROM in the OMAP 3530 so that is why this entry 
-@REM point looks so strange. 
-@REM OMAP 3430 TRM section 26.4.8 has Image header information. (missing in OMAP 3530 TRM)
-@REM
-@cd Tools



-ECHO Building tools...
-CALL nmake



-ECHO Patching image with ConfigurationHeader.dat
-CALL GenerateImage -D ..\ConfigurationHeader.dat -E 0x80008208 -I %BUILD_ROOT%\FV\BEAGLEBOARD_EFI.fd -O %BUILD_ROOT%\FV\BeagleBoard_EFI_flashboot.fd



-ECHO Patching ..\Debugger_scripts ...
-SET DEBUGGER_SCRIPT=..\Debugger_scripts
-@for /f %%a IN ('dir /b %DEBUGGER_SCRIPT%*.inc %DEBUGGER_SCRIPT%*.cmm') do (

@CALL replace %DEBUGGER_SCRIPT%%%a %BUILD_ROOT%%%a ZZZZZZ %BUILD_ROOT% WWWWWW  %WORKSPACE%

-)



-cd ..
-:Exit
-EXIT /B



-:Clean
-cd Tools
-CALL nmake clean
-cd ..
diff --git a/Platforms/TexasInstruments/BeagleBoard/build.sh b/Platforms/TexasInstruments/BeagleBoard/build.sh
deleted file mode 100755
index 32b22f085777..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/build.sh
+++ /dev/null
@@ -1,150 +0,0 @@
-#!/bin/bash
-# Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution.  The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#



-set -e
-shopt -s nocasematch



-function process_debug_scripts {

if [[ -d $1 ]]; then
for filename in `ls $1`
do
 sed -e "s@ZZZZZZ@$BUILD_ROOT@g" -e "s@WWWWWW@$WORKSPACE@g" \


       "$1/$filename" \


       > "$BUILD_ROOT/$filename"



 #For ARMCYGWIN, we have to change /cygdrive/c to c:


 if [[ $TARGET_TOOLS == RVCT31CYGWIN ]]


 then


   mv "$BUILD_ROOT/$filename" "$BUILD_ROOT/$filename"_temp


   sed -e "s@/cygdrive/\(.\)@\1:@g" \


         "$BUILD_ROOT/$filename"_temp \


         > "$BUILD_ROOT/$filename"


   rm -f "$BUILD_ROOT/$filename"_temp


 fi


done
fi

-}




-#
-# Setup workspace if it is not set
-#
-if [ -z "${WORKSPACE:-}" ]
-then

echo Initializing workspace
cd ..

-# Uses an external BaseTools project 
-#  export EDK_TOOLS_PATH=`pwd`/../BaseTools
-# Uses the BaseTools in edk2

export EDK_TOOLS_PATH=`pwd`/BaseTools
source edksetup.sh BaseTools

-else

echo Building from: $WORKSPACE

-fi



-#
-# Pick a default tool type for a given OS if no toolchain already defined
-#
-if [ -z "${TARGET_TOOLS:-}" ]
-then

case `uname` in
CYGWIN*)
 TARGET_TOOLS=RVCT31CYGWIN 


 ;;


Linux*)
 if [[ ! -z `locate arm-linux-gnueabi-gcc` ]]; then


   TARGET_TOOLS=ARMLINUXGCC


 else 


   TARGET_TOOLS=ARMGCC 


 fi


 ;;


Darwin*)
 Major=$(uname -r | cut -f 1 -d '.')


 if [[ $Major == 9 ]]


 then


   # Not supported by this open source project


   TARGET_TOOLS=XCODE31


 else 


   TARGET_TOOLS=XCODE32


 fi  


 ;;


esac

-fi



-TARGET=DEBUG
-for arg in "$@"
-do

if [[ $arg == RELEASE ]];
then
TARGET=RELEASE
fi

-done



-BUILD_ROOT=$WORKSPACE/Build/BeagleBoard/"$TARGET"_"$TARGET_TOOLS"
-GENERATE_IMAGE=$WORKSPACE/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/Tools/generate_image
-FLASH_BOOT=$BUILD_ROOT/FV/BeagleBoard_EFI_flashboot.fd



-if  [[ ! -e $EDK_TOOLS_PATH/Source/C/bin ]];
-then

# build the tools if they don't yet exist
echo Building tools: $EDK_TOOLS_PATH
make -C $EDK_TOOLS_PATH

-else

echo using prebuilt tools

-fi



-#
-# Build the edk2 BeagleBoard code
-#
-if [[ $TARGET == RELEASE ]]; then

build -p $WORKSPACE/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dsc -a ARM -t $TARGET_TOOLS -b $TARGET -D DEBUG_TARGET=RELEASE ${2:-} ${3:-} ${4:-} ${5:-} ${6:-} ${7:-} ${8:-}

-else

build -p ${WORKSPACE:-}/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/BeagleBoardPkg.dsc -a ARM -t $TARGET_TOOLS -b $TARGET ${1:-} ${2:-} ${3:-} ${4:-} ${5:-} ${6:-} ${7:-} ${8:-}

-fi




-for arg in "$@"
-do

if [[ $arg == clean ]]; then
# no need to post process if we are doing a clean
exit
elif [[ $arg == cleanall ]]; then
make -C $EDK_TOOLS_PATH clean
make -C $WORKSPACE/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/Tools clean
exit

fi

-done




-#
-#  Build the tool used to patch the FLASH image to work with the Beagle board ROM
-#
-if [[ ! -e $GENERATE_IMAGE ]];
-then

make -C $WORKSPACE/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/Tools

-fi



-echo Patching FD to work with BeagleBoard ROM
-rm -f $FLASH_BOOT



-#
-# Ram starts at 0x80000000
-# OMAP 3530 TRM defines 0x80008000 as the entry point
-# The reset vector is caught by the mask ROM in the OMAP 3530 so that is why this entry 
-# point looks so strange. 
-# OMAP 3430 TRM section 26.4.8 has Image header information. (missing in OMAP 3530 TRM)
-#
-$GENERATE_IMAGE -D $WORKSPACE/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/ConfigurationHeader.dat -E 0x80008000 -I $BUILD_ROOT/FV/BEAGLEBOARD_EFI.fd -O $FLASH_BOOT



-echo Creating debugger scripts
-process_debug_scripts $WORKSPACE/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/Debugger_scripts



diff --git a/Platforms/TexasInstruments/BeagleBoard/readme.txt b/Platforms/TexasInstruments/BeagleBoard/readme.txt
deleted file mode 100644
index d15b1fb2db4a..000000000000
--- a/Platforms/TexasInstruments/BeagleBoard/readme.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-On Ubuntu 10.04, in your $(WORKROOT) directory (eg: ~/dev/)



-Build UEFI for the BeagleBoard :
-# Requirements
-sudo apt-get install uuid-dev



-# Get the arm-none-eabi Toolchain:
-cd $(WORKROOT)
-wget http://www.codesourcery.com/sgpp/lite/arm/portal/package7813/public/arm-none...
-tar xjf arm-2010.09-51-arm-none-eabi-i686-pc-linux-gnu.tar.bz2
-Add the arm-none-eabi toolchain to your path



-# Build UEFI
-svn co https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2 edk2 --username guest
-cd $(WORKROOT)/edk2
-svn co https://edk2-fatdriver2.svn.sourceforge.net/svnroot/edk2-fatdriver2/trunk/Fa... FatPkg --username guest
-patch -p1 < ArmPlatformPkg/Documentation/patches/BaseTools-Pending-Patches.patch
-cd OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/
-./build.sh



-# To Build a Release verion of UEFI
-./build.sh RELEASE




-Test UEFI on qEmu :



-Installing Linaro qEmu:
-cd $(WORKROOT)
-git clone git://git.linaro.org/qemu/qemu-linaro.git
-cd $(WORKROOT)/qemu-linaro
-./configure --target-list=arm-softmmu,arm-linux-user,armeb-linux-user
-make



-Installing Linaro image Creator:
-wget http://launchpad.net/linaro-image-tools/trunk/0.4.8/+download/linaro-image-t...
-tar xzf linaro-image-tools-0.4.8.tar.gz
-cd $(WORKROOT)/linaro-image-tools-0.4.8/
-sudo apt-get install parted dosfstools uboot-mkimage python-argparse python-dbus python-debian python-parted qemu-arm-static btrfs-tools command-not-found



-Creating u-boot + Linux Linaro image:
-mkdir $(WORKROOT)/beagle_image && cd $(WORKROOT)/beagle_image
-wget http://releases.linaro.org/platform/linaro-m/hwpacks/final/hwpack_linaro-oma...
-wget http://releases.linaro.org/platform/linaro-m/headless/release-candidate/lina...
-sudo $(WORKROOT)/linaro-image-tools-0.4.8/linaro-media-create --image_file beagle_sd.img --dev beagle --binary linaro-m-headless-tar-20101101-0.tar.gz --hwpack hwpack_linaro-omap3_20101109-1_armel_supported.tar.gz
-sudo chmod a+rw beagle_sd.img



-Test u-boot + Linux Linaro image on qEmu:
-$(WORKROOT)/qemu-linaro/arm-softmmu/qemu-system-arm -M beagle -sd $(WORKROOT)/beagle_image/beagle_sd.img -serial stdio -clock unix
-# in u-boot:
-boot



-Start UEFI from NOR Flash :
-# Adding zImage to beagle_sd.img
-mkdir /tmp/beagle_img1
-sudo mount -o loop,offset=$[63*512] $(WORKROOT)/beagle_image/beagle_sd.img /tmp/beagle_img1
-cp zImage /tmp/beagle_img1
-sudo umount /tmp/beagle_img1



-./qemu-system-arm -M beagle -mtdblock /work/tianocore/Build/BeagleBoard/DEBUG_ARMGCC/FV/BeagleBoard_EFI_flashboot.fd -serial stdio -sd /work/linaro-image-tools-0.4.8/beagle_sd.img



-Start UEFI from SD card :
-# To replace u-boot by uefi in the SD card
-1) Build the BeagleBoard UEFI firmware without the OMAP353x header
-cd $(WORKROOT)/edk2/OpenPlatformPkg/Platforms/TexasInstruments/BeagleBoard/
-./build.sh -D EDK2_SECOND_STAGE_BOOTOLADER=1



-2) Replace u-boot by UEFI
-sudo mount -o loop,offset=$[63*512] $(WORKROOT)/beagle_image/beagle_sd.img /tmp/beagle_img1
-sudo cp ../Build/BeagleBoard/DEBUG_ARMGCC/FV/BEAGLEBOARD_EFI.fd /tmp/beagle_img1/u-boot.bin
-sudo umount /tmp/beagle_img1
2.7.4

    

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Re: [Linaro-uefi] [PATCH] Chips/TI Platforms/TI: drop BeagleBoard

-= Code Contributions =

-= Change Description / Commit Message / Patch Email =

-Signed-off-by: Contributor Name contributor@example.com

-= TianoCore Contribution Agreement 1.0 =

-= Code Contributions =

-= Change Description / Commit Message / Patch Email =

-Signed-off-by: Contributor Name contributor@example.com

-= TianoCore Contribution Agreement 1.0 =

-Build UEFI for the BeagleBoard :

-Test UEFI on qEmu :

-Installing Linaro qEmu:

-Installing Linaro image Creator:

-Creating u-boot + Linux Linaro image:

-Test u-boot + Linux Linaro image on qEmu:

-Start UEFI from NOR Flash :

-Start UEFI from SD card :

-sudo umount /tmp/beagle_img1