Re: [Linaro-uefi] [PATCH 4/6] Platform/Marvell: ComPhyLib: Configure analog parameters for PCIE

On Fri, Apr 07, 2017 at 05:58:42PM +0200, Marcin Wojtas wrote:

This patch adds analog parameters configuration for PCIE with the values defined during electrical tests of the interface.

Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Marcin Wojtas mw@semihalf.com

So, I'll wait for 4 and 5 to be reformatted like 3, but a couple of further comments:

---

Platforms/Marvell/Library/ComPhyLib/ComPhyCp110.c | 161 +++++++++++++++++++++- Platforms/Marvell/Library/ComPhyLib/ComPhyLib.h | 63 ++++++++- 2 files changed, 222 insertions(+), 2 deletions(-)

diff --git a/Platforms/Marvell/Library/ComPhyLib/ComPhyCp110.c b/Platforms/Marvell/Library/ComPhyLib/ComPhyCp110.c index e3f6d45..c012919 100755 --- a/Platforms/Marvell/Library/ComPhyLib/ComPhyCp110.c +++ b/Platforms/Marvell/Library/ComPhyLib/ComPhyCp110.c @@ -187,6 +187,10 @@ ComPhyPciePhyConfiguration ( Mask |= HPIPE_MISC_REFCLK_SEL_MASK; Data |= 0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET; }

• /* Force ICP */
• Mask |= HPIPE_MISC_ICP_FORCE_MASK;
• Data |= 0x1 << HPIPE_MISC_ICP_FORCE_OFFSET; RegSet (HpipeAddr + HPIPE_MISC_REG, Data, Mask);

if (PcieClk) { @@ -216,7 +220,9 @@ ComPhyPciePhyConfiguration ( /* Set Maximal PHY Generation Setting (8Gbps) */ Mask = HPIPE_INTERFACE_GEN_MAX_MASK; Data = 0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET;

• /* Bypass frame detection and sync detection for RX DATA */
• Mask = HPIPE_INTERFACE_DET_BYPASS_MASK;
• Data = 0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET; /* Set Link Train Mode (Tx training control pins are used) */ Mask |= HPIPE_INTERFACE_LINK_TRAIN_MASK; Data |= 0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET;

@@ -256,6 +262,155 @@ ComPhyPciePhyConfiguration ( STATIC VOID +ComPhyPcieSetAnalogParameters (

• IN EFI_PHYSICAL_ADDRESS HpipeAddr

+) +{

• UINT32 Data, Mask;
• /* Set Preset sweep configurations */
• Mask = HPIPE_TX_TX_STATUS_CHECK_MODE_MASK;
• Data = 0x1 << HPIPE_TX_STATUS_CHECK_MODE_OFFSET;
• Mask |= HPIPE_TX_NUM_OF_PRESET_MASK;
• Data |= 0x7 << HPIPE_TX_NUM_OF_PRESET_OFFSET;
• Mask |= HPIPE_TX_SWEEP_PRESET_EN_MASK;
• Data |= 0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET;
• RegSet (HpipeAddr + HPIPE_TX_TRAIN_CTRL_11_REG, Data, Mask);

I would quite like to get rid of this Marvell-specific reimplementation of the BaseLib function MmioAndThenOr32.

• /* Tx train start configuration */
• Mask = HPIPE_TX_TRAIN_START_SQ_EN_MASK;
• Data = 0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET;
• Mask |= HPIPE_TX_TRAIN_START_FRM_DET_EN_MASK;
• Data |= 0x0 << HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET;

Where the value being set is 0, just ignore the shift.

• Mask |= HPIPE_TX_TRAIN_START_FRM_LOCK_EN_MASK;
• Data |= 0x0 << HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET;
• Mask |= HPIPE_TX_TRAIN_WAIT_TIME_EN_MASK;
• Data |= 0x1 << HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET;
• RegSet (HpipeAddr + HPIPE_TX_TRAIN_CTRL_5_REG, Data, Mask);
• /* Enable Tx train P2P */
• Mask = HPIPE_TX_TRAIN_P2P_HOLD_MASK;
• Data = 0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET;
• RegSet (HpipeAddr + HPIPE_TX_TRAIN_CTRL_0_REG, Data, Mask);
• /* Configure Tx train timeout */
• Mask = HPIPE_TRX_TRAIN_TIMER_MASK;
• Data = 0x17 << HPIPE_TRX_TRAIN_TIMER_OFFSET;
• RegSet (HpipeAddr + HPIPE_TX_TRAIN_CTRL_4_REG, Data, Mask);

For a single bitfield, can be directly replaced by:

MmioAndThenOr32 ( HpipeAddr + HPIPE_TX_TRAIN_CTRL_4_REG, ~HPIPE_TRX_TRAIN_TIMER_MASK, 0x17 << HPIPE_TRX_TRAIN_TIMER_OFFSET );

Without any temporary variables.

Regards,

Leif

• /* Disable G0/G1/GN1 adaptation */
• Mask = HPIPE_TX_TRAIN_CTRL_G1_MASK | HPIPE_TX_TRAIN_CTRL_GN1_MASK | HPIPE_TX_TRAIN_CTRL_G0_OFFSET;
• Data = 0;
• RegSet (HpipeAddr + HPIPE_TX_TRAIN_CTRL_REG, Data, Mask);
• /* Disable DTL frequency loop */
• Mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
• Data = 0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
• RegSet (HpipeAddr + HPIPE_PWR_CTR_DTL_REG, Data, Mask);
• /* Configure G3 DFE */
• Mask = HPIPE_G3_DFE_RES_MASK;
• Data = 0x3 << HPIPE_G3_DFE_RES_OFFSET;
• RegSet (HpipeAddr + HPIPE_G3_SETTING_4_REG, Data, Mask);
• /* Use TX/RX training result for DFE */
• Mask = HPIPE_DFE_RES_FORCE_MASK;
• Data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET;
• RegSet (HpipeAddr + HPIPE_DFE_REG0, Data, Mask);
• /* Configure initial and final coefficient value for receiver */
• Mask = HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK;
• Data = 0x1 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET;
• Mask |= HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK;
• Data |= 0x1 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET;
• Mask |= HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK;
• Data |= 0x0 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET;
• RegSet (HpipeAddr + HPIPE_G3_SET_1_REG, Data, Mask);
• /* Trigger sampler 5us enable pulse */
• Mask = HPIPE_SAMPLER_MASK;
• Data = 0x1 << HPIPE_SAMPLER_OFFSET;
• RegSet (HpipeAddr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, Data, Mask);
• MicroSecondDelay (5);
• RegSet (HpipeAddr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, 0, Mask);
• /* FFE resistor tuning for different bandwidth */
• Mask = HPIPE_G3_FFE_DEG_RES_LEVEL_MASK;
• Data = 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET;
• Mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK;
• Data |= 0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
• RegSet (HpipeAddr + HPIPE_G3_SETTING_3_REG, Data, Mask);
• /* Pattern lock lost timeout disable */
• Mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK;
• Data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET;
• RegSet (HpipeAddr + HPIPE_FRAME_DETECT_CTRL_3_REG, Data, Mask);
• /* Configure DFE adaptations */
• Mask = HPIPE_CDR_MAX_DFE_ADAPT_1_MASK;
• Data = 0x1 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET;
• Mask |= HPIPE_CDR_MAX_DFE_ADAPT_0_MASK;
• Data |= 0x0 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET;
• Mask |= HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK;
• Data |= 0x0 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET;
• RegSet (HpipeAddr + HPIPE_CDR_CONTROL_REG, Data, Mask);
• Mask = HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK;
• Data = 0x0 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET;
• RegSet (HpipeAddr + HPIPE_DFE_CONTROL_REG, Data, Mask);
• /* Genration 2 setting 1*/
• Mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK;
• Data = 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET;
• Mask |= HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK;
• Data |= 0x1 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET;
• Mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK;
• Data |= 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET;
• RegSet (HpipeAddr + HPIPE_G2_SET_1_REG, Data, Mask);
• /* DFE enable */
• Mask = HPIPE_G2_DFE_RES_MASK;
• Data = 0x3 << HPIPE_G2_DFE_RES_OFFSET;
• RegSet (HpipeAddr + HPIPE_G2_SETTINGS_4_REG, Data, Mask);
• /* Configure DFE Resolution */
• Mask = HPIPE_LANE_CFG4_DFE_EN_SEL_MASK;
• Data = 0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET;
• RegSet (HpipeAddr + HPIPE_LANE_CFG4_REG, Data, Mask);
• /* VDD calibration control */
• Mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
• Data = 0x16 << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
• RegSet (HpipeAddr + HPIPE_VDD_CAL_CTRL_REG, Data, Mask);
• /* Set PLL Charge-pump Current Control */
• Mask = HPIPE_G3_SETTING_5_G3_ICP_MASK;
• Data = 0x4 << HPIPE_G3_SETTING_5_G3_ICP_OFFSET;
• RegSet (HpipeAddr + HPIPE_G3_SETTING_5_REG, Data, Mask);
• /* Set lane rqualization remote setting */
• Mask = HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK;
• Data = 0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET;
• Mask |= HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK;
• Data |= 0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET;
• Mask |= HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK;
• Data |= 0x2 << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET;
• RegSet (HpipeAddr + HPIPE_LANE_EQ_REMOTE_SETTING_REG, Data, Mask);
• /* Set phy in root complex mode */
• Mask = HPIPE_CFG_PHY_RC_EP_MASK;
• Data = 0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET;
• RegSet (HpipeAddr + HPIPE_LANE_EQU_CONFIG_0_REG, Data, Mask);

+}

+STATIC +VOID ComPhyPciePhyPowerUp ( IN EFI_PHYSICAL_ADDRESS HpipeAddr ) @@ -312,6 +467,10 @@ ComPhyPciePowerUp ( ComPhyPciePhyConfiguration (ComPhyAddr, HpipeAddr);

• DEBUG((DEBUG_INFO, "ComPhy: stage: Set analog paramters\n"));
• ComPhyPcieSetAnalogParameters (HpipeAddr);
• DEBUG((DEBUG_INFO, "ComPhy: stage: ComPhy power up\n"));

ComPhyPciePhyPowerUp (HpipeAddr); diff --git a/Platforms/Marvell/Library/ComPhyLib/ComPhyLib.h b/Platforms/Marvell/Library/ComPhyLib/ComPhyLib.h index 463e542..b282de7 100644 --- a/Platforms/Marvell/Library/ComPhyLib/ComPhyLib.h +++ b/Platforms/Marvell/Library/ComPhyLib/ComPhyLib.h @@ -174,7 +174,6 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #define HPIPE_DFE_RES_FORCE_OFFSET 15 #define HPIPE_DFE_RES_FORCE_MASK (0x1 << HPIPE_DFE_RES_FORCE_OFFSET)

#define HPIPE_DFE_F3_F5_REG 0x028 #define HPIPE_DFE_F3_F5_DFE_EN_OFFSET 14 #define HPIPE_DFE_F3_F5_DFE_EN_MASK (0x1 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET) @@ -268,6 +267,8 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #define HPIPE_INTERFACE_REG 0x94 #define HPIPE_INTERFACE_GEN_MAX_OFFSET 10 #define HPIPE_INTERFACE_GEN_MAX_MASK (0x3 << HPIPE_INTERFACE_GEN_MAX_OFFSET) +#define HPIPE_INTERFACE_DET_BYPASS_OFFSET 12 +#define HPIPE_INTERFACE_DET_BYPASS_MASK (0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET) #define HPIPE_INTERFACE_LINK_TRAIN_OFFSET 14 #define HPIPE_INTERFACE_LINK_TRAIN_MASK (0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET) @@ -300,6 +301,8 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #define HPIPE_MISC_REG 0x13C #define HPIPE_MISC_CLK100M_125M_OFFSET 4 #define HPIPE_MISC_CLK100M_125M_MASK (0x1 << HPIPE_MISC_CLK100M_125M_OFFSET) +#define HPIPE_MISC_ICP_FORCE_OFFSET 5 +#define HPIPE_MISC_ICP_FORCE_MASK (0x1 << HPIPE_MISC_ICP_FORCE_OFFSET) #define HPIPE_MISC_TXDCLK_2X_OFFSET 6 #define HPIPE_MISC_TXDCLK_2X_MASK (0x1 << HPIPE_MISC_TXDCLK_2X_OFFSET) #define HPIPE_MISC_CLK500_EN_OFFSET 7 @@ -381,15 +384,45 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #define HPIPE_TX_TRAIN_CTRL_G0_OFFSET 2 #define HPIPE_TX_TRAIN_CTRL_G0_MASK (0x1 << HPIPE_TX_TRAIN_CTRL_G0_OFFSET) +#define HPIPE_TX_TRAIN_CTRL_4_REG 0x278 +#define HPIPE_TRX_TRAIN_TIMER_OFFSET 0 +#define HPIPE_TRX_TRAIN_TIMER_MASK (0x3FF << HPIPE_TRX_TRAIN_TIMER_OFFSET)

#define HPIPE_PCIE_REG1 0x288 #define HPIPE_PCIE_REG3 0x290 +#define HPIPE_TX_TRAIN_CTRL_5_REG 0x2A4 +#define HPIPE_TX_TRAIN_START_SQ_EN_OFFSET 11 +#define HPIPE_TX_TRAIN_START_SQ_EN_MASK (0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET) +#define HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET 12 +#define HPIPE_TX_TRAIN_START_FRM_DET_EN_MASK (0x1 << HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET) +#define HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET 13 +#define HPIPE_TX_TRAIN_START_FRM_LOCK_EN_MASK (0x1 << HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET) +#define HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET 14 +#define HPIPE_TX_TRAIN_WAIT_TIME_EN_MASK (0x1 << HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET)

#define HPIPE_TX_TRAIN_REG 0x31C #define HPIPE_TX_TRAIN_CHK_INIT_OFFSET 4 #define HPIPE_TX_TRAIN_CHK_INIT_MASK (0x1 << HPIPE_TX_TRAIN_CHK_INIT_OFFSET) #define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET 7 #define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_MASK (0x1 << HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET) +#define HPIPE_CDR_CONTROL_REG 0x418 +#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET 12 +#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK (0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET) +#define HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET 9 +#define HPIPE_CDR_MAX_DFE_ADAPT_0_MASK (0x7 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET) +#define HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET 6 +#define HPIPE_CDR_MAX_DFE_ADAPT_1_MASK (0x7 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET)

+#define HPIPE_TX_TRAIN_CTRL_11_REG 0x438 +#define HPIPE_TX_STATUS_CHECK_MODE_OFFSET 6 +#define HPIPE_TX_TX_STATUS_CHECK_MODE_MASK (0x1 << HPIPE_TX_STATUS_CHECK_MODE_OFFSET) +#define HPIPE_TX_NUM_OF_PRESET_OFFSET 10 +#define HPIPE_TX_NUM_OF_PRESET_MASK (0x7 << HPIPE_TX_NUM_OF_PRESET_OFFSET) +#define HPIPE_TX_SWEEP_PRESET_EN_OFFSET 15 +#define HPIPE_TX_SWEEP_PRESET_EN_MASK (0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET)

#define HPIPE_G1_SETTINGS_3_REG 0x440 #define HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET 0 #define HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK (0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET) @@ -435,10 +468,24 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #define HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET 14 #define HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK (0x3 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET) +#define HPIPE_G3_SETTING_3_REG 0x450 +#define HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET 12 +#define HPIPE_G3_FFE_DEG_RES_LEVEL_MASK (0x3 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET) +#define HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET 14 +#define HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK (0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET)

+#define HPIPE_G3_SETTING_4_REG 0x454 +#define HPIPE_G3_DFE_RES_OFFSET 8 +#define HPIPE_G3_DFE_RES_MASK (0x3 << HPIPE_G3_DFE_RES_OFFSET)

#define HPIPE_DFE_CTRL_28_REG 0x49C #define HPIPE_DFE_CTRL_28_PIPE4_OFFSET 7 #define HPIPE_DFE_CTRL_28_PIPE4_MASK (0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET) +#define HPIPE_G3_SETTING_5_REG 0x548 +#define HPIPE_G3_SETTING_5_G3_ICP_OFFSET 0 +#define HPIPE_G3_SETTING_5_G3_ICP_MASK (0xf << HPIPE_G3_SETTING_5_G3_ICP_OFFSET)

#define HPIPE_LANE_CONFIG0_REG 0x604 #define HPIPE_LANE_CONFIG0_MAX_PLL_OFFSET 9 #define HPIPE_LANE_CONFIG0_MAX_PLL_MASK (0x1 << HPIPE_LANE_CONFIG0_MAX_PLL_OFFSET) @@ -452,15 +499,29 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #define HPIPE_LANE_CFG4_REG 0x620 #define HPIPE_LANE_CFG4_DFE_CTRL_OFFSET 0 #define HPIPE_LANE_CFG4_DFE_CTRL_MASK (0x7 << HPIPE_LANE_CFG4_DFE_CTRL_OFFSET) +#define HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET 3 +#define HPIPE_LANE_CFG4_DFE_EN_SEL_MASK (0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET) #define HPIPE_LANE_CFG4_DFE_OVER_OFFSET 6 #define HPIPE_LANE_CFG4_DFE_OVER_MASK (0x1 << HPIPE_LANE_CFG4_DFE_OVER_OFFSET) #define HPIPE_LANE_CFG4_SSC_CTRL_OFFSET 7 #define HPIPE_LANE_CFG4_SSC_CTRL_MASK (0x1 << HPIPE_LANE_CFG4_SSC_CTRL_OFFSET) +#define HPIPE_LANE_EQU_CONFIG_0_REG 0x69C +#define HPIPE_CFG_PHY_RC_EP_OFFSET 12 +#define HPIPE_CFG_PHY_RC_EP_MASK (0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET)

#define HPIPE_LANE_EQ_CFG1_REG 0x6a0 #define HPIPE_CFG_UPDATE_POLARITY_OFFSET 12 #define HPIPE_CFG_UPDATE_POLARITY_MASK (0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET) +#define HPIPE_LANE_EQ_REMOTE_SETTING_REG 0x6f8 +#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET 0 +#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK (0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET) +#define HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET 1 +#define HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK (0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET) +#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET 2 +#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK (0xf << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET)

#define HPIPE_RST_CLK_CTRL_REG 0x704 #define HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET 0

#define HPIPE_RST_CLK_CTRL_PIPE_RST_MASK (0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET)

1.8.3.1