Booting UEFI for our 64 bit models/platforms has become more complex due to upstream changes.
You can build UEFI as per usual, however, before you can boot the .fd file, you will have to wrap it into a Firmware Image Package (aka FIP).
You will not be able to mix "old " and "new" versions of UEFI and TF.
-------------------------------------------------------------------------------- - Get the UEFI build tools -------------------------------------------------------------------------------- git clone git.linaro.org/arm/uefi/uefi-tools.git PATH=$PATH:`pwd`/uefi-tools
You can also download a pre-built binary from a release or snapshot build place such as:
http://releases.linaro.org/14.04/components/kernel/uefi-linaro http://snapshots.linaro.org/components/kernel/linaro-edk2/latest http://snapshots.linaro.org/components/kernel/linaro-edk2-release-prep/lates... http://snapshots.linaro.org/components/kernel/fvp-pre-boot/latest
-------------------------------------------------------------------------------- - Build UEFI for the FVP models -------------------------------------------------------------------------------- git clone git://git.linaro.org/uefi/linaro-edk2.git cd linaro-edk2 uefi-build fvp_minimal
This will give you a .fd file, such as: ./Build/ArmVExpress-FVP-AArch64/RELEASE_GCC48/FV/FVP_AARCH64_EFI.fd
You will then need to point the "BL33" environment variable to this file, eg:
export BL33=`pwd`/Build/ArmVExpress-FVP-AArch64/RELEASE_GCC48/FV/FVP_AARCH64_EFI.fd
-------------------------------------------------------------------------------- - Build the Trusted Firmware for FVP models -------------------------------------------------------------------------------- git clone git://git.linaro.org/arm/arm-trusted-firmware.git CROSS_COMPILE=aarch64-linux-gnu- make PLAT=fvp all fip
You will then have two important files: ./build/fvp/release/bl1.bin ./build/fvp/release/fip.bin
-------------------------------------------------------------------------------- - Boot the model -------------------------------------------------------------------------------- Pass the bl1.bin and fip.bin files as parameters to the model. Eg, this is how I booted my model:
/linaro/fastmodels/FVP_Base_AEMv8A-AEMv8A/models/Linux64_GCC-4.1/FVP_Base_AEMv8A-AEMv8A -C pctl.startup=0.0.0.0 -C bp.secure_memory=0 -C cluster0.NUM_CORES=1 -C cluster1.NUM_CORES=1 -C cache_state_modelled=0 -C bp.pl011_uart0.untimed_fifos=1 -C bp.secureflashloader.fname=./build/fvp/release/bl1.bin -C bp.flashloader0.fname=./build/fvp/release/fip.bin -C bp.virtioblockdevice.image_path=/linaro/releases/oe/14.04/fastmodel/sd.img -C bp.hostbridge.interfaceName=ARMryan -C bp.smsc_91c111.enabled=true -C bp.smsc_91c111.mac_address=00:02:f7:ef:67:e6
Of course, your installation path to the models and the location of your disk image will vary.
Hope this all helps,
Regards, Ryan.