Use tabs consistently throughout the Overdrive DTS file, and use CR-LF line endings just like every other file in EDK2.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel ard.biesheuvel@linaro.org --- Platforms/AMD/Styx/OverdriveBoard/FdtBlob/styx-overdrive.dts | 866 ++++++++++---------- 1 file changed, 432 insertions(+), 434 deletions(-)
diff --git a/Platforms/AMD/Styx/OverdriveBoard/FdtBlob/styx-overdrive.dts b/Platforms/AMD/Styx/OverdriveBoard/FdtBlob/styx-overdrive.dts index 3cb9a3128737..36474a26c9c6 100644 --- a/Platforms/AMD/Styx/OverdriveBoard/FdtBlob/styx-overdrive.dts +++ b/Platforms/AMD/Styx/OverdriveBoard/FdtBlob/styx-overdrive.dts @@ -1,434 +1,432 @@ -/* - * DTS file for AMD Seattle (Rev.B) Overdrive Development Board - * - * Copyright 2015 - 2016 ADVANCED MICRO DEVICES, INC. All Rights Reserved. - * - * This program and the accompanying materials are licensed and made available - * under the terms and conditions of the BSD License which accompanies this - * distribution. The full text of the license may be found at - * http://opensource.org/licenses/bsd-license.php - * - * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR - * IMPLIED. - * - */ - -/dts-v1/; - -/ { - model = "AMD Seattle (Rev.B) Development Board (Overdrive)"; - compatible = "amd,seattle-overdrive", "amd,seattle"; - interrupt-parent = <0x1>; - #address-cells = <0x2>; - #size-cells = <0x2>; - - interrupt-controller@e1101000 { - compatible = "arm,gic-400", "arm,cortex-a15-gic"; - interrupt-controller; - #interrupt-cells = <0x3>; - #address-cells = <0x2>; - #size-cells = <0x2>; - reg = <0x0 0xe1110000 0x0 0x1000>, - <0x0 0xe112f000 0x0 0x2000>, - <0x0 0xe1140000 0x0 0x10000>, - <0x0 0xe1160000 0x0 0x10000>; - interrupts = <0x1 0x9 0xf04>; - ranges = <0x0 0x0 0x0 0xe1100000 0x0 0x100000>; - linux,phandle = <0x1>; - phandle = <0x1>; - - v2m@e0080000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x0 0x80000 0x0 0x1000>; - linux,phandle = <0x4>; - phandle = <0x4>; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <0x1 0xd 0xff04>, - <0x1 0xe 0xff04>, - <0x1 0xb 0xff04>, - <0x1 0xa 0xff04>; - }; - - smb { - compatible = "simple-bus"; - #address-cells = <0x2>; - #size-cells = <0x2>; - ranges; - /* - * dma-ranges is 40-bit address space containing: - * - GICv2m MSI register is at 0xe0080000 - * - DRAM range [0x8000000000 to 0xffffffffff] - */ - dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; - - clk100mhz_0 { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <100000000>; - clock-output-names = "adl3clk_100mhz"; - }; - - clk375mhz { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <375000000>; - clock-output-names = "ccpclk_375mhz"; - }; - - clk333mhz { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <333000000>; - clock-output-names = "sataclk_333mhz"; - linux,phandle = <0x2>; - phandle = <0x2>; - }; - - clk500mhz_0 { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <500000000>; - clock-output-names = "pcieclk_500mhz"; - }; - - clk500mhz_1 { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <500000000>; - clock-output-names = "dmaclk_500mhz"; - }; - - clk250mhz_4 { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <250000000>; - clock-output-names = "miscclk_250mhz"; - linux,phandle = <0xd>; - phandle = <0xd>; - }; - - clk100mhz_1 { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <100000000>; - clock-output-names = "uartspiclk_100mhz"; - linux,phandle = <0x3>; - phandle = <0x3>; - }; - - sata@e0300000 { - compatible = "snps,dwc-ahci"; - reg = <0x0 0xe0300000 0x0 0xf0000>; - interrupts = <0x0 0x163 0x4>; - clocks = <0x2>; - dma-coherent; - }; - - sata@e0d00000 { - status = "disabled"; - compatible = "snps,dwc-ahci"; - reg = <0x0 0xe0d00000 0x0 0xf0000>; - interrupts = <0x0 0x162 0x4>; - clocks = <0x2>; - dma-coherent; - }; - - i2c@e1000000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0xe1000000 0x0 0x1000>; - interrupts = <0x0 0x165 0x4>; - clocks = <0xd>; - }; - - i2c@e0050000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0xe0050000 0x0 0x1000>; - interrupts = <0x0 0x154 0x4>; - clocks = <0xd>; - }; - - serial@e1010000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0xe1010000 0x0 0x1000>; - interrupts = <0x0 0x148 0x4>; - clocks = <0x3 0x3>; - clock-names = "uartclk", "apb_pclk"; - }; - - ssp@e1020000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x0 0xe1020000 0x0 0x1000>; - spi-controller; - interrupts = <0x0 0x14a 0x4>; - clocks = <0x3>; - clock-names = "apb_pclk"; - }; - - ssp@e1030000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x0 0xe1030000 0x0 0x1000>; - spi-controller; - interrupts = <0x0 0x149 0x4>; - clocks = <0x3>; - clock-names = "apb_pclk"; - num-cs = <0x1>; - #address-cells = <0x1>; - #size-cells = <0x0>; - - sdcard@0 { - compatible = "mmc-spi-slot"; - reg = <0x0>; - spi-max-frequency = <20000000>; - voltage-ranges = <3200 3400>; - pl022,hierarchy = <0x0>; - pl022,interface = <0x0>; - pl022,com-mode = <0x0>; - pl022,rx-level-trig = <0x0>; - pl022,tx-level-trig = <0x0>; - }; - }; - - gpio@e1050000 { /* [0 : 7] */ - compatible = "arm,pl061", "arm,primecell"; - #gpio-cells = <0x2>; - reg = <0x0 0xe1050000 0x0 0x1000>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <0x2>; - interrupts = <0x0 0x166 0x4>; - clocks = <0x3>; - clock-names = "apb_pclk"; - }; - - gpio@e0020000 { /* [8 : 15] */ - status = "disabled"; - compatible = "arm,pl061", "arm,primecell"; - #gpio-cells = <0x2>; - reg = <0x0 0xe0020000 0x0 0x1000>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <0x2>; - interrupts = <0x0 0x16e 0x4>; - clocks = <0x3>; - clock-names = "apb_pclk"; - }; - - gpio@e0030000 { /* [16 : 23] */ - status = "disabled"; - compatible = "arm,pl061", "arm,primecell"; - #gpio-cells = <0x2>; - reg = <0x0 0xe0030000 0x0 0x1000>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <0x2>; - interrupts = <0x0 0x16d 0x4>; - clocks = <0x3>; - clock-names = "apb_pclk"; - }; - - gpio@e0080000 { /* [24] */ - compatible = "arm,pl061", "arm,primecell"; - #gpio-cells = <0x2>; - reg = <0x0 0xe0080000 0x0 0x1000>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <0x2>; - interrupts = <0x0 0x169 0x4>; - clocks = <0x3>; - clock-names = "apb_pclk"; - }; - - ccp: ccp@e0100000 { - compatible = "amd,ccp-seattle-v1a"; - reg = <0x0 0xe0100000 0x0 0x10000>; - interrupts = <0x0 0x3 0x4>; - dma-coherent; - amd,zlib-support = <0x1>; - }; - - pcie: pcie@f0000000 { - compatible = "pci-host-ecam-generic"; - #address-cells = <0x3>; - #size-cells = <0x2>; - #interrupt-cells = <0x1>; - device_type = "pci"; - bus-range = <0x0 0x7f>; - msi-parent = <0x4>; - reg = <0x0 0xf0000000 0x0 0x10000000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0x1000 0x0 0x0 0x1 0x1 0x0 0x0 0x0 0x120 0x1>, - <0x1000 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x121 0x1>, - <0x1000 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x122 0x1>, - <0x1000 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x123 0x1>; - dma-coherent; - dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>; - ranges = <0x1000000 0x0 0x00000000 0x0 0xefff0000 0x00 0x00010000>, /* I/O Memory (size=64K) */ - <0x2000000 0x0 0x40000000 0x0 0x40000000 0x00 0x80000000>, /* 32-bit MMIO (size=2G) */ - <0x3000000 0x1 0x00000000 0x1 0x00000000 0x7f 0x00000000>; /* 64-bit MMIO (size= 124G) */ - }; - - ccn@0xe8000000 { - compatible = "arm,ccn-504"; - reg = <0x0 0xe8000000 0x0 0x1000000>; - interrupts = <0x0 0x17c 0x4>; - }; - - gwdt@e0bb0000 { - status = "disabled"; - compatible = "arm,sbsa-gwdt"; - reg = <0x0 0xe0bb0000 0x0 0x10000 - 0x0 0xe0bc0000 0x0 0x10000>; - reg-names = "refresh", "control"; - interrupts = <0x0 0x151 0x4>; - interrupt-names = "ws0"; - }; - - kcs@e0010000 { - status = "disabled"; - compatible = "ipmi-kcs"; - device_type = "ipmi"; - reg = <0x0 0xe0010000 0 0x8>; - interrupts = <0 389 4>; - interrupt-names = "ipmi_kcs"; - reg-size = <1>; - reg-spacing = <4>; - }; - - clk250mhz_0 { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <250000000>; - clock-output-names = "xgmacclk0_dma_250mhz"; - linux,phandle = <0x5>; - phandle = <0x5>; - }; - - clk250mhz_1 { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <250000000>; - clock-output-names = "xgmacclk0_ptp_250mhz"; - linux,phandle = <0x6>; - phandle = <0x6>; - }; - - clk250mhz_2 { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <250000000>; - clock-output-names = "xgmacclk1_dma_250mhz"; - linux,phandle = <0x7>; - phandle = <0x7>; - }; - - clk250mhz_3 { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <250000000>; - clock-output-names = "xgmacclk1_ptp_250mhz"; - linux,phandle = <0x8>; - phandle = <0x8>; - }; - - phy@e1240800 { - status = "disabled"; - compatible = "amd,xgbe-phy-seattle-v1a"; - reg = <0x0 0xe1240800 0x0 0x0400>, /* SERDES RX/TX0 */ - <0x0 0xe1250000 0x0 0x0060>, /* SERDES IR 1/2 */ - <0x0 0xe12500f8 0x0 0x0004>; /* SERDES IR 2/2 */ - interrupts = <0x0 0x143 0x4>; - amd,speed-set = <0x0>; - amd,serdes-blwc = <0x1 0x1 0x0>; - amd,serdes-cdr-rate = <0x2 0x2 0x7>; - amd,serdes-pq-skew = <0xa 0xa 0x12>; - amd,serdes-tx-amp = <0xf 0xf 0xa>; - amd,serdes-dfe-tap-config = <0x3 0x3 0x1>; - amd,serdes-dfe-tap-enable = <0x0 0x0 0x7f>; - linux,phandle = <0x9>; - phandle = <0x9>; - }; - - phy@e1240c00 { - status = "disabled"; - compatible = "amd,xgbe-phy-seattle-v1a"; - reg = <0x0 0xe1240c00 0x0 0x0400>, /* SERDES RX/TX0 */ - <0x0 0xe1250080 0x0 0x0060>, /* SERDES IR 1/2 */ - <0x0 0xe12500fc 0x0 0x0004>; /* SERDES IR 2/2 */ - interrupts = <0x0 0x142 0x4>; - amd,speed-set = <0x0>; - amd,serdes-blwc = <0x1 0x1 0x0>; - amd,serdes-cdr-rate = <0x2 0x2 0x7>; - amd,serdes-pq-skew = <0xa 0xa 0x12>; - amd,serdes-tx-amp = <0xf 0xf 0xa>; - amd,serdes-dfe-tap-config = <0x3 0x3 0x1>; - amd,serdes-dfe-tap-enable = <0x0 0x0 0x7f>; - linux,phandle = <0xa>; - phandle = <0xa>; - }; - - xgmac@e0700000 { - status = "disabled"; - compatible = "amd,xgbe-seattle-v1a"; - reg = <0x0 0xe0700000 0x0 0x80000 0x0 0xe0780000 0x0 0x80000>; - interrupts = <0x0 0x145 0x4>, - <0x0 0x15a 0x1>, - <0x0 0x15b 0x1>, - <0x0 0x15c 0x1>, - <0x0 0x15d 0x1>; - amd,per-channel-interrupt; - mac-address = [02 a1 a2 a3 a4 a5]; - clocks = <0x5 0x6>; - clock-names = "dma_clk", "ptp_clk"; - phy-handle = <0x9>; - phy-mode = "xgmii"; - #stream-id-cells = <0x18>; - dma-coherent; - linux,phandle = <0xb>; - phandle = <0xb>; - }; - - xgmac@e0900000 { - status = "disabled"; - compatible = "amd,xgbe-seattle-v1a"; - reg = <0x0 0xe0900000 0x0 0x80000 0x0 0xe0980000 0x0 0x80000>; - interrupts = <0x0 0x144 0x4>, - <0x0 0x155 0x1>, - <0x0 0x156 0x1>, - <0x0 0x157 0x1>, - <0x0 0x158 0x1>; - amd,per-channel-interrupt; - mac-address = [02 b1 b2 b3 b4 b5]; - clocks = <0x7 0x8>; - clock-names = "dma_clk", "ptp_clk"; - phy-handle = <0xa>; - phy-mode = "xgmii"; - #stream-id-cells = <0x18>; - dma-coherent; - linux,phandle = <0xc>; - phandle = <0xc>; - }; - }; - - chosen { - stdout-path = "/smb/serial@e1010000"; - /* Note: - * Linux support for pci-probe-only DT is not - * stable. Disable this for now and let Linux - * take care of the resource assignment. - */ - // linux,pci-probe-only; - }; - - psci { - compatible = "arm,psci-0.2", "arm,psci"; - method = "smc"; - }; -}; - - +/* + * DTS file for AMD Seattle (Rev.B) Overdrive Development Board + * + * Copyright 2015 - 2016 ADVANCED MICRO DEVICES, INC. All Rights Reserved. + * + * This program and the accompanying materials are licensed and made available + * under the terms and conditions of the BSD License which accompanies this + * distribution. The full text of the license may be found at + * http://opensource.org/licenses/bsd-license.php + * + * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR + * IMPLIED. + * + */ + +/dts-v1/; + +/ { + model = "AMD Seattle (Rev.B) Development Board (Overdrive)"; + compatible = "amd,seattle-overdrive", "amd,seattle"; + interrupt-parent = <0x1>; + #address-cells = <0x2>; + #size-cells = <0x2>; + + interrupt-controller@e1101000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <0x3>; + #address-cells = <0x2>; + #size-cells = <0x2>; + reg = <0x0 0xe1110000 0x0 0x1000>, + <0x0 0xe112f000 0x0 0x2000>, + <0x0 0xe1140000 0x0 0x10000>, + <0x0 0xe1160000 0x0 0x10000>; + interrupts = <0x1 0x9 0xf04>; + ranges = <0x0 0x0 0x0 0xe1100000 0x0 0x100000>; + linux,phandle = <0x1>; + phandle = <0x1>; + + v2m@e0080000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x80000 0x0 0x1000>; + linux,phandle = <0x4>; + phandle = <0x4>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <0x1 0xd 0xff04>, + <0x1 0xe 0xff04>, + <0x1 0xb 0xff04>, + <0x1 0xa 0xff04>; + }; + + smb { + compatible = "simple-bus"; + #address-cells = <0x2>; + #size-cells = <0x2>; + ranges; + /* + * dma-ranges is 40-bit address space containing: + * - GICv2m MSI register is at 0xe0080000 + * - DRAM range [0x8000000000 to 0xffffffffff] + */ + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; + + clk100mhz_0 { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <100000000>; + clock-output-names = "adl3clk_100mhz"; + }; + + clk375mhz { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <375000000>; + clock-output-names = "ccpclk_375mhz"; + }; + + clk333mhz { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <333000000>; + clock-output-names = "sataclk_333mhz"; + linux,phandle = <0x2>; + phandle = <0x2>; + }; + + clk500mhz_0 { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <500000000>; + clock-output-names = "pcieclk_500mhz"; + }; + + clk500mhz_1 { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <500000000>; + clock-output-names = "dmaclk_500mhz"; + }; + + clk250mhz_4 { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <250000000>; + clock-output-names = "miscclk_250mhz"; + linux,phandle = <0xd>; + phandle = <0xd>; + }; + + clk100mhz_1 { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <100000000>; + clock-output-names = "uartspiclk_100mhz"; + linux,phandle = <0x3>; + phandle = <0x3>; + }; + + sata@e0300000 { + compatible = "snps,dwc-ahci"; + reg = <0x0 0xe0300000 0x0 0xf0000>; + interrupts = <0x0 0x163 0x4>; + clocks = <0x2>; + dma-coherent; + }; + + sata@e0d00000 { + status = "disabled"; + compatible = "snps,dwc-ahci"; + reg = <0x0 0xe0d00000 0x0 0xf0000>; + interrupts = <0x0 0x162 0x4>; + clocks = <0x2>; + dma-coherent; + }; + + i2c@e1000000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xe1000000 0x0 0x1000>; + interrupts = <0x0 0x165 0x4>; + clocks = <0xd>; + }; + + i2c@e0050000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xe0050000 0x0 0x1000>; + interrupts = <0x0 0x154 0x4>; + clocks = <0xd>; + }; + + serial@e1010000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xe1010000 0x0 0x1000>; + interrupts = <0x0 0x148 0x4>; + clocks = <0x3 0x3>; + clock-names = "uartclk", "apb_pclk"; + }; + + ssp@e1020000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xe1020000 0x0 0x1000>; + spi-controller; + interrupts = <0x0 0x14a 0x4>; + clocks = <0x3>; + clock-names = "apb_pclk"; + }; + + ssp@e1030000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xe1030000 0x0 0x1000>; + spi-controller; + interrupts = <0x0 0x149 0x4>; + clocks = <0x3>; + clock-names = "apb_pclk"; + num-cs = <0x1>; + #address-cells = <0x1>; + #size-cells = <0x0>; + + sdcard@0 { + compatible = "mmc-spi-slot"; + reg = <0x0>; + spi-max-frequency = <20000000>; + voltage-ranges = <3200 3400>; + pl022,hierarchy = <0x0>; + pl022,interface = <0x0>; + pl022,com-mode = <0x0>; + pl022,rx-level-trig = <0x0>; + pl022,tx-level-trig = <0x0>; + }; + }; + + gpio@e1050000 { /* [0 : 7] */ + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <0x2>; + reg = <0x0 0xe1050000 0x0 0x1000>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <0x2>; + interrupts = <0x0 0x166 0x4>; + clocks = <0x3>; + clock-names = "apb_pclk"; + }; + + gpio@e0020000 { /* [8 : 15] */ + status = "disabled"; + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <0x2>; + reg = <0x0 0xe0020000 0x0 0x1000>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <0x2>; + interrupts = <0x0 0x16e 0x4>; + clocks = <0x3>; + clock-names = "apb_pclk"; + }; + + gpio@e0030000 { /* [16 : 23] */ + status = "disabled"; + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <0x2>; + reg = <0x0 0xe0030000 0x0 0x1000>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <0x2>; + interrupts = <0x0 0x16d 0x4>; + clocks = <0x3>; + clock-names = "apb_pclk"; + }; + + gpio@e0080000 { /* [24] */ + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <0x2>; + reg = <0x0 0xe0080000 0x0 0x1000>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <0x2>; + interrupts = <0x0 0x169 0x4>; + clocks = <0x3>; + clock-names = "apb_pclk"; + }; + + ccp: ccp@e0100000 { + compatible = "amd,ccp-seattle-v1a"; + reg = <0x0 0xe0100000 0x0 0x10000>; + interrupts = <0x0 0x3 0x4>; + dma-coherent; + amd,zlib-support = <0x1>; + }; + + pcie: pcie@f0000000 { + compatible = "pci-host-ecam-generic"; + #address-cells = <0x3>; + #size-cells = <0x2>; + #interrupt-cells = <0x1>; + device_type = "pci"; + bus-range = <0x0 0x7f>; + msi-parent = <0x4>; + reg = <0x0 0xf0000000 0x0 0x10000000>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = <0x1000 0x0 0x0 0x1 0x1 0x0 0x0 0x0 0x120 0x1>, + <0x1000 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x121 0x1>, + <0x1000 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x122 0x1>, + <0x1000 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x123 0x1>; + dma-coherent; + dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>; + ranges = <0x1000000 0x0 0x00000000 0x0 0xefff0000 0x00 0x00010000>, /* I/O Memory (size=64K) */ + <0x2000000 0x0 0x40000000 0x0 0x40000000 0x00 0x80000000>, /* 32-bit MMIO (size=2G) */ + <0x3000000 0x1 0x00000000 0x1 0x00000000 0x7f 0x00000000>; /* 64-bit MMIO (size= 124G) */ + }; + + ccn@0xe8000000 { + compatible = "arm,ccn-504"; + reg = <0x0 0xe8000000 0x0 0x1000000>; + interrupts = <0x0 0x17c 0x4>; + }; + + gwdt@e0bb0000 { + status = "disabled"; + compatible = "arm,sbsa-gwdt"; + reg = <0x0 0xe0bb0000 0x0 0x10000 + 0x0 0xe0bc0000 0x0 0x10000>; + reg-names = "refresh", "control"; + interrupts = <0x0 0x151 0x4>; + interrupt-names = "ws0"; + }; + + kcs@e0010000 { + status = "disabled"; + compatible = "ipmi-kcs"; + device_type = "ipmi"; + reg = <0x0 0xe0010000 0 0x8>; + interrupts = <0 389 4>; + interrupt-names = "ipmi_kcs"; + reg-size = <1>; + reg-spacing = <4>; + }; + + clk250mhz_0 { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <250000000>; + clock-output-names = "xgmacclk0_dma_250mhz"; + linux,phandle = <0x5>; + phandle = <0x5>; + }; + + clk250mhz_1 { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <250000000>; + clock-output-names = "xgmacclk0_ptp_250mhz"; + linux,phandle = <0x6>; + phandle = <0x6>; + }; + + clk250mhz_2 { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <250000000>; + clock-output-names = "xgmacclk1_dma_250mhz"; + linux,phandle = <0x7>; + phandle = <0x7>; + }; + + clk250mhz_3 { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <250000000>; + clock-output-names = "xgmacclk1_ptp_250mhz"; + linux,phandle = <0x8>; + phandle = <0x8>; + }; + + phy@e1240800 { + status = "disabled"; + compatible = "amd,xgbe-phy-seattle-v1a"; + reg = <0x0 0xe1240800 0x0 0x0400>, /* SERDES RX/TX0 */ + <0x0 0xe1250000 0x0 0x0060>, /* SERDES IR 1/2 */ + <0x0 0xe12500f8 0x0 0x0004>; /* SERDES IR 2/2 */ + interrupts = <0x0 0x143 0x4>; + amd,speed-set = <0x0>; + amd,serdes-blwc = <0x1 0x1 0x0>; + amd,serdes-cdr-rate = <0x2 0x2 0x7>; + amd,serdes-pq-skew = <0xa 0xa 0x12>; + amd,serdes-tx-amp = <0xf 0xf 0xa>; + amd,serdes-dfe-tap-config = <0x3 0x3 0x1>; + amd,serdes-dfe-tap-enable = <0x0 0x0 0x7f>; + linux,phandle = <0x9>; + phandle = <0x9>; + }; + + phy@e1240c00 { + status = "disabled"; + compatible = "amd,xgbe-phy-seattle-v1a"; + reg = <0x0 0xe1240c00 0x0 0x0400>, /* SERDES RX/TX0 */ + <0x0 0xe1250080 0x0 0x0060>, /* SERDES IR 1/2 */ + <0x0 0xe12500fc 0x0 0x0004>; /* SERDES IR 2/2 */ + interrupts = <0x0 0x142 0x4>; + amd,speed-set = <0x0>; + amd,serdes-blwc = <0x1 0x1 0x0>; + amd,serdes-cdr-rate = <0x2 0x2 0x7>; + amd,serdes-pq-skew = <0xa 0xa 0x12>; + amd,serdes-tx-amp = <0xf 0xf 0xa>; + amd,serdes-dfe-tap-config = <0x3 0x3 0x1>; + amd,serdes-dfe-tap-enable = <0x0 0x0 0x7f>; + linux,phandle = <0xa>; + phandle = <0xa>; + }; + + xgmac@e0700000 { + status = "disabled"; + compatible = "amd,xgbe-seattle-v1a"; + reg = <0x0 0xe0700000 0x0 0x80000 0x0 0xe0780000 0x0 0x80000>; + interrupts = <0x0 0x145 0x4>, + <0x0 0x15a 0x1>, + <0x0 0x15b 0x1>, + <0x0 0x15c 0x1>, + <0x0 0x15d 0x1>; + amd,per-channel-interrupt; + mac-address = [02 a1 a2 a3 a4 a5]; + clocks = <0x5 0x6>; + clock-names = "dma_clk", "ptp_clk"; + phy-handle = <0x9>; + phy-mode = "xgmii"; + #stream-id-cells = <0x18>; + dma-coherent; + linux,phandle = <0xb>; + phandle = <0xb>; + }; + + xgmac@e0900000 { + status = "disabled"; + compatible = "amd,xgbe-seattle-v1a"; + reg = <0x0 0xe0900000 0x0 0x80000 0x0 0xe0980000 0x0 0x80000>; + interrupts = <0x0 0x144 0x4>, + <0x0 0x155 0x1>, + <0x0 0x156 0x1>, + <0x0 0x157 0x1>, + <0x0 0x158 0x1>; + amd,per-channel-interrupt; + mac-address = [02 b1 b2 b3 b4 b5]; + clocks = <0x7 0x8>; + clock-names = "dma_clk", "ptp_clk"; + phy-handle = <0xa>; + phy-mode = "xgmii"; + #stream-id-cells = <0x18>; + dma-coherent; + linux,phandle = <0xc>; + phandle = <0xc>; + }; + }; + + chosen { + stdout-path = "/smb/serial@e1010000"; + /* Note: + * Linux support for pci-probe-only DT is not + * stable. Disable this for now and let Linux + * take care of the resource assignment. + */ + // linux,pci-probe-only; + }; + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "smc"; + }; +};