Support Designware USB device controller on HiKey platform.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Haojian Zhuang haojian.zhuang@linaro.org --- .../Hisilicon/HiKey/HiKeyUsbDxe/HiKeyUsbDxe.c | 265 +++++++++++++++++++++ .../Hisilicon/HiKey/HiKeyUsbDxe/HiKeyUsbDxe.inf | 46 ++++ 2 files changed, 311 insertions(+) create mode 100644 Platforms/Hisilicon/HiKey/HiKeyUsbDxe/HiKeyUsbDxe.c create mode 100644 Platforms/Hisilicon/HiKey/HiKeyUsbDxe/HiKeyUsbDxe.inf
diff --git a/Platforms/Hisilicon/HiKey/HiKeyUsbDxe/HiKeyUsbDxe.c b/Platforms/Hisilicon/HiKey/HiKeyUsbDxe/HiKeyUsbDxe.c new file mode 100644 index 0000000..59ef57c --- /dev/null +++ b/Platforms/Hisilicon/HiKey/HiKeyUsbDxe/HiKeyUsbDxe.c @@ -0,0 +1,265 @@ +/** @file +* +* Copyright (c) 2015-2017, Linaro. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#include <Library/BaseMemoryLib.h> +#include <Library/DebugLib.h> +#include <Library/IoLib.h> +#include <Library/TimerLib.h> +#include <Library/UefiBootServicesTableLib.h> +#include <Library/UefiLib.h> +#include <Library/UefiRuntimeServicesTableLib.h> + +#include <Protocol/EmbeddedGpio.h> +#include <Protocol/DwUsb.h> + +#include <Hi6220.h> + + +#define USB_SEL_GPIO0_3 3 // GPIO 0_3 +#define USB_5V_HUB_EN 7 // GPIO 0_7 +#define USB_ID_DET_GPIO2_5 21 // GPIO 2_5 +#define USB_VBUS_DET_GPIO2_6 22 // GPIO 2_6 + +// Jumper on pin5-6 of J15 determines whether boot to fastboot +#define DETECT_J15_FASTBOOT 24 // GPIO 3_0 + +#define IOCG_GPIO0_BASE 0xF8001800 +#define IOCG_GPIO0_3_OFFSET 0x1C +#define IOCG_GPIO0_7_OFFSET 0x2C +#define IOCG_GPIO2_5_OFFSET 0x64 +#define IOCG_GPIO2_6_OFFSET 0x68 + +#define IOCG_PULLUP 1 +#define IOCG_PULLDOWN 2 + +#define USB_EYE_PATTERN 0x70533483 + +#define LANG_EN 0x409 + +STATIC EMBEDDED_GPIO *mGpio; + +STATIC +EFI_STATUS +HiKeyDetectUsbModeInit ( + IN VOID + ) +{ + EFI_STATUS Status; + + /* set pullup on both GPIO2_5 & GPIO2_6. It's required for inupt. */ + MmioWrite32 (IOCG_GPIO0_BASE + IOCG_GPIO2_5_OFFSET, IOCG_PULLUP); + MmioWrite32 (IOCG_GPIO0_BASE + IOCG_GPIO2_6_OFFSET, IOCG_PULLUP); + + Status = gBS->LocateProtocol (&gEmbeddedGpioProtocolGuid, NULL, (VOID **)&mGpio); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "Can't locate gEmbeddedGpioProtocolGuid\n")); + return Status; + } + /* power on USB HUB */ + Status = mGpio->Set (mGpio, USB_5V_HUB_EN, GPIO_MODE_OUTPUT_0); + ASSERT_EFI_ERROR (Status); + /* start to detect USB device or host */ + Status = mGpio->Set (mGpio, USB_SEL_GPIO0_3, GPIO_MODE_OUTPUT_0); + ASSERT_EFI_ERROR (Status); + + Status = mGpio->Set (mGpio, USB_ID_DET_GPIO2_5, GPIO_MODE_INPUT); + ASSERT_EFI_ERROR (Status); + Status = mGpio->Set (mGpio, USB_VBUS_DET_GPIO2_6, GPIO_MODE_INPUT); + ASSERT_EFI_ERROR (Status); + return EFI_SUCCESS; +} + +UINTN +HiKeyGetUsbMode ( + IN VOID + ) +{ + EFI_STATUS Status; + UINTN GpioId, GpioVbus; + + Status = mGpio->Get (mGpio, USB_ID_DET_GPIO2_5, &GpioId); + ASSERT_EFI_ERROR (Status); + Status = mGpio->Get (mGpio, USB_VBUS_DET_GPIO2_6, &GpioVbus); + ASSERT_EFI_ERROR (Status); + + if ((GpioId == 1) && (GpioVbus == 0)) { + return USB_DEVICE_MODE; + } else if ((GpioId == 0) && (GpioVbus == 1)) { + return USB_CABLE_NOT_ATTACHED; + } + return USB_HOST_MODE; +} + +EFI_STATUS +HiKeyUsbPhyInit ( + IN UINT8 Mode + ) +{ + UINTN Value; + UINT32 Data; + EFI_STATUS Status; + + Status = HiKeyDetectUsbModeInit (); + if (EFI_ERROR (Status)) { + return Status; + } + + //setup clock + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN0, PERIPH_CLKEN0_USBOTG); + do { + Value = MmioRead32 (PERI_CTRL_BASE + SC_PERIPH_CLKSTAT0); + } while ((Value & PERIPH_CLKEN0_USBOTG) == 0); + + //setup phy + Data = RST0_USBOTG_BUS | RST0_POR_PICOPHY | + RST0_USBOTG | RST0_USBOTG_32K; + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS0, Data); + do { + Value = MmioRead32 (PERI_CTRL_BASE + SC_PERIPH_RSTSTAT0); + Value &= Data; + } while (Value); + + Value = MmioRead32 (PERI_CTRL_BASE + SC_PERIPH_CTRL4); + Value &= ~(CTRL4_PICO_SIDDQ | CTRL4_FPGA_EXT_PHY_SEL | + CTRL4_OTG_PHY_SEL); + Value |= CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL; + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CTRL4, Value); + + if (HiKeyGetUsbMode () != Mode) { + return EFI_INVALID_PARAMETER; + } + //If Mode = 1, USB in Device Mode + //If Mode = 0, USB in Host Mode + if (Mode == USB_DEVICE_MODE) { + DEBUG ((DEBUG_INFO, "usb work as device mode.\n")); + + Value = MmioRead32 (PERI_CTRL_BASE + SC_PERIPH_CTRL5); + Value &= ~CTRL5_PICOPHY_BC_MODE; + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CTRL5, Value); + /* wait for stable */ + MicroSecondDelay (20000); + } else { + DEBUG ((DEBUG_INFO, "usb work as host mode.\n")); + + /*CTRL5*/ + Data = MmioRead32 (PERI_CTRL_BASE + SC_PERIPH_CTRL5); + Data &= ~CTRL5_PICOPHY_BC_MODE; + Data |= CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB | + CTRL5_PICOPHY_VDATDETENB | CTRL5_PICOPHY_DCDENB; + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CTRL5, Data); + /* wait for stable */ + MicroSecondDelay (20000); + /* Set the USB phy timing with tuned value that shows an eye pattern on oscillator. */ + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CTRL8, USB_EYE_PATTERN); + /* wait for eye pattern effective */ + MicroSecondDelay (5000); + } + + return EFI_SUCCESS; +} + +EFI_STATUS +EFIAPI +HiKeyUsbGetLang ( + OUT CHAR16 *Lang, + OUT UINT8 *Length + ) +{ + if ((Lang == NULL) || (Length == NULL)) { + return EFI_INVALID_PARAMETER; + } + Lang[0] = LANG_EN; + *Length = sizeof (CHAR16); + return EFI_SUCCESS; +} + +EFI_STATUS +EFIAPI +HiKeyUsbGetManufacturer ( + OUT CHAR16 *Manufacturer, + OUT UINT8 *Length + ) +{ + CHAR16 DataUnicode[] = L"96Boards"; + + if ((Manufacturer == NULL) || (Length == NULL)) { + return EFI_INVALID_PARAMETER; + } + StrCpy (Manufacturer, DataUnicode); + /* include '\0' for string */ + *Length = (StrLen (DataUnicode) + 1) * sizeof (CHAR16); + return EFI_SUCCESS; +} + +EFI_STATUS +EFIAPI +HiKeyUsbGetProduct ( + OUT CHAR16 *Product, + OUT UINT8 *Length + ) +{ + CHAR16 DataUnicode[] = L"HiKey"; + + if ((Product == NULL) || (Length == NULL)) { + return EFI_INVALID_PARAMETER; + } + StrCpy (Product, DataUnicode); + /* include '\0' for string */ + *Length = (StrLen (DataUnicode) + 1) * sizeof (CHAR16); + return EFI_SUCCESS; +} + +EFI_STATUS +EFIAPI +HiKeyUsbGetSerialNo ( + OUT CHAR16 *SerialNo, + OUT UINT8 *Length + ) +{ + CHAR16 DataUnicode[] = L"0123456789abcdef"; + + if ((SerialNo == NULL) || (Length == NULL)) { + return EFI_INVALID_PARAMETER; + } + StrCpy (SerialNo, DataUnicode); + /* include '\0' for string */ + *Length = (StrLen (DataUnicode) + 1) * sizeof (CHAR16); + return EFI_SUCCESS; +} + +DW_USB_PROTOCOL mDwUsbDevice = { + HiKeyUsbGetLang, + HiKeyUsbGetManufacturer, + HiKeyUsbGetProduct, + HiKeyUsbGetSerialNo, + HiKeyUsbPhyInit +}; + +EFI_STATUS +EFIAPI +HiKeyUsbEntryPoint ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + + Status = gBS->InstallProtocolInterface ( + &ImageHandle, + &gDwUsbProtocolGuid, + EFI_NATIVE_INTERFACE, + &mDwUsbDevice + ); + return Status; +} diff --git a/Platforms/Hisilicon/HiKey/HiKeyUsbDxe/HiKeyUsbDxe.inf b/Platforms/Hisilicon/HiKey/HiKeyUsbDxe/HiKeyUsbDxe.inf new file mode 100644 index 0000000..57d639a --- /dev/null +++ b/Platforms/Hisilicon/HiKey/HiKeyUsbDxe/HiKeyUsbDxe.inf @@ -0,0 +1,46 @@ +#/** @file +# +# Copyright (c) 2015-2017, Linaro. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# +#**/ + +[Defines] + INF_VERSION = 0x00010019 + BASE_NAME = HiKeyUsbDxe + FILE_GUID = c5c7089e-9b00-448c-8b23-a552688e2833 + MODULE_TYPE = UEFI_DRIVER + VERSION_STRING = 1.0 + ENTRY_POINT = HiKeyUsbEntryPoint + +[Sources.common] + HiKeyUsbDxe.c + +[LibraryClasses] + DebugLib + IoLib + TimerLib + UefiBootServicesTableLib + UefiDriverEntryPoint + +[Protocols] + gDwUsbProtocolGuid + gEfiDriverBindingProtocolGuid + gEmbeddedGpioProtocolGuid + +[Packages] + EmbeddedPkg/EmbeddedPkg.dec + MdeModulePkg/MdeModulePkg.dec + MdePkg/MdePkg.dec + OpenPlatformPkg/Drivers/Usb/DwUsbDxe/DwUsbDxe.dec + OpenPlatformPkg/Platforms/Hisilicon/HiKey/HiKey.dec + +[Depex] + TRUE