[edk2 UsbMassStorageDxe v1 0/1] Calculating the count of blocks to transfer

List overview All Threads
Download

newer

older

[MdeModulePkg/Usb v2 0/1]...

[PATCH v3 0/5] Add support for ATF...

Ming Huang

15 Mar 2018 15 Mar '18

12:29 p.m.

Calculating the count of blocks to transfer by Evaluating block size to fix booting failed from USB issue in some platforms.

Ming Huang (1): MdeModulePkg/Usb: Replace macro USB_BOOT_IO_BLOCKS

MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c | 16 ++++++++++++---- MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h | 4 ++-- 2 files changed, 14 insertions(+), 6 deletions(-)

-- 1.9.1

Show replies by date

Ming Huang

15 Mar 15 Mar

12:29 p.m.

New subject: [edk2 UsbMassStorageDxe v1 1/1] MdeModulePkg/Usb: Replace macro USB_BOOT_IO_BLOCKS

Booting from USB may fail while the macro USB_BOOT_IO_BLOCKS set to 128 because the block size of some USB devices are exceeded 512. So,the count blocks to transfer should be calculated by block size of the USB devices.

Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ming Huang ming.huang@linaro.org --- MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c | 16 ++++++++++++---- MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h | 4 ++-- 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c index b84bfd2d7290..b38cb6116bf4 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c @@ -814,11 +814,13 @@ UsbBootReadBlocks ( USB_BOOT_READ10_CMD ReadCmd; EFI_STATUS Status; UINT16 Count; + UINT16 CountMax; UINT32 BlockSize; UINT32 ByteSize; UINT32 Timeout;

BlockSize = UsbMass->BlockIoMedia.BlockSize; + CountMax = USB_BOOT_MAX_CARRY_SIZE / BlockSize; Status = EFI_SUCCESS;

while (TotalBlock > 0) { @@ -827,7 +829,7 @@ UsbBootReadBlocks ( // on the device. We must split the total block because the READ10 // command only has 16 bit transfer length (in the unit of block). // - Count = (UINT16)((TotalBlock < USB_BOOT_IO_BLOCKS) ? TotalBlock : USB_BOOT_IO_BLOCKS); + Count = (UINT16)((TotalBlock < CountMax) ? TotalBlock : CountMax); ByteSize = (UINT32)Count * BlockSize;

// @@ -890,11 +892,13 @@ UsbBootWriteBlocks ( USB_BOOT_WRITE10_CMD WriteCmd; EFI_STATUS Status; UINT16 Count; + UINT16 CountMax; UINT32 BlockSize; UINT32 ByteSize; UINT32 Timeout;

BlockSize = UsbMass->BlockIoMedia.BlockSize; + CountMax = USB_BOOT_MAX_CARRY_SIZE / BlockSize; Status = EFI_SUCCESS;

while (TotalBlock > 0) { @@ -903,7 +907,7 @@ UsbBootWriteBlocks ( // on the device. We must split the total block because the WRITE10 // command only has 16 bit transfer length (in the unit of block). // - Count = (UINT16)((TotalBlock < USB_BOOT_IO_BLOCKS) ? TotalBlock : USB_BOOT_IO_BLOCKS); + Count = (UINT16)((TotalBlock < CountMax) ? TotalBlock : CountMax); ByteSize = (UINT32)Count * BlockSize;

// @@ -966,18 +970,20 @@ UsbBootReadBlocks16 ( UINT8 ReadCmd[16]; EFI_STATUS Status; UINT16 Count; + UINT16 CountMax; UINT32 BlockSize; UINT32 ByteSize; UINT32 Timeout;

BlockSize = UsbMass->BlockIoMedia.BlockSize; + CountMax = USB_BOOT_MAX_CARRY_SIZE / BlockSize; Status = EFI_SUCCESS;

while (TotalBlock > 0) { // // Split the total blocks into smaller pieces. // - Count = (UINT16)((TotalBlock < USB_BOOT_IO_BLOCKS) ? TotalBlock : USB_BOOT_IO_BLOCKS); + Count = (UINT16)((TotalBlock < CountMax) ? TotalBlock : CountMax); ByteSize = (UINT32)Count * BlockSize;

// @@ -1040,18 +1046,20 @@ UsbBootWriteBlocks16 ( UINT8 WriteCmd[16]; EFI_STATUS Status; UINT16 Count; + UINT16 CountMax; UINT32 BlockSize; UINT32 ByteSize; UINT32 Timeout;

BlockSize = UsbMass->BlockIoMedia.BlockSize; + CountMax = USB_BOOT_MAX_CARRY_SIZE / BlockSize; Status = EFI_SUCCESS;

// diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h index 13a926035ceb..fc5449bde21e 100644 --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h @@ -65,9 +65,9 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #define USB_PDT_SIMPLE_DIRECT 0x0E ///< Simplified direct access device

// -// Other parameters, Max carried size is 512B * 128 = 64KB +// Other parameters, Max carried size is 64KB. // -#define USB_BOOT_IO_BLOCKS 128 +#define USB_BOOT_MAX_CARRY_SIZE 0x10000

// // Retry mass command times, set by experience

-- 1.9.1

Zeng, Star

21 Mar 21 Mar

12:40 p.m.

New subject: [edk2 UsbMassStorageDxe v1 1/1] MdeModulePkg/Usb: Replace macro USB_BOOT_IO_BLOCKS

Ming,

Basically, I am ok with the change in this patch. There are two comments.

1. Please add more background information about the specific device in the commit log. For example, you mentioned " like some virtual CD-ROM from BMC " in previous patch. 2. Please make sure building pass with the patch on different tool chains. I tried to build with the patch on VS2015, but met building failure like below. warning C4244: '=': conversion from 'UINT32' to 'UINT16', possible loss of data

Ray,

Do you have other concern?

Thanks, Star -----Original Message----- From: Ming Huang [mailto:ming.huang@linaro.org] Sent: Thursday, March 15, 2018 8:30 PM To: leif.lindholm@linaro.org; linaro-uefi@lists.linaro.org; edk2-devel@lists.01.org; Zeng, Star star.zeng@intel.com; Dong, Eric eric.dong@intel.com Cc: ard.biesheuvel@linaro.org; Kinney, Michael D michael.d.kinney@intel.com; Gao, Liming liming.gao@intel.com; guoheyi@huawei.com; wanghuiqiang@huawei.com; huangming23@huawei.com; zhangjinsong2@huawei.com; mengfanrong@huawei.com; huangdaode@hisilicon.com; waip23@126.com; Ming Huang ming.huang@linaro.org Subject: [edk2 UsbMassStorageDxe v1 1/1] MdeModulePkg/Usb: Replace macro USB_BOOT_IO_BLOCKS