The UEFI driver for Marvell Yukon chipset, part 1

Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Daniil Egranov daniil.egranov@arm.com --- Platforms/ARM/Juno/ArmJuno.dsc | 4 ++++ Platforms/ARM/Juno/ArmJuno.fdf | 1 + 2 files changed, 5 insertions(+)

diff --git a/Platforms/ARM/Juno/ArmJuno.dsc b/Platforms/ARM/Juno/ArmJuno.dsc index 7f030a7..0092f11 100644 --- a/Platforms/ARM/Juno/ArmJuno.dsc +++ b/Platforms/ARM/Juno/ArmJuno.dsc @@ -133,6 +133,9 @@ gEmbeddedTokenSpaceGuid.PcdLan9118DefaultMacAddress|0x1215161822242628 gEmbeddedTokenSpaceGuid.PcdLan9118DefaultNegotiationTimeout|40000

+ # MarvellYukonDxe Ethernet Driver + # gEmbeddedTokenSpaceGuid.PcdYukonMacAddress|0x0000A26000F70200 + # # ARM General Interrupt Controller # @@ -285,6 +288,7 @@ # Networking stack # EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.inf + OpenPlatformPkg/Drivers/Net/MarvellYukonDxe/MarvellYukonDxe.inf

# # Usb Support diff --git a/Platforms/ARM/Juno/ArmJuno.fdf b/Platforms/ARM/Juno/ArmJuno.fdf index db2cfa9..e486a33 100644 --- a/Platforms/ARM/Juno/ArmJuno.fdf +++ b/Platforms/ARM/Juno/ArmJuno.fdf @@ -187,6 +187,7 @@ FvNameGuid = B73FE497-B92E-416e-8326-45AD0D270092 INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf INF EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.inf + INF OpenPlatformPkg/Drivers/Net/MarvellYukonDxe/MarvellYukonDxe.inf

# # UEFI applications

The UEFI driver for Marvell Yukon chipset, part 3

Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Daniil Egranov daniil.egranov@arm.com --- Drivers/Net/MarvellYukonDxe/e1000phy.c | 659 +++++++ Drivers/Net/MarvellYukonDxe/e1000phyreg.h | 398 ++++ Drivers/Net/MarvellYukonDxe/if_media.h | 273 +++ Drivers/Net/MarvellYukonDxe/if_msk.c | 2982 +++++++++++++++++++++++++++++ Drivers/Net/MarvellYukonDxe/if_msk.h | 52 + Drivers/Net/MarvellYukonDxe/if_mskreg.h | 2491 ++++++++++++++++++++++++ Drivers/Net/MarvellYukonDxe/miivar.h | 198 ++ 7 files changed, 7053 insertions(+) create mode 100644 Drivers/Net/MarvellYukonDxe/e1000phy.c create mode 100644 Drivers/Net/MarvellYukonDxe/e1000phyreg.h create mode 100644 Drivers/Net/MarvellYukonDxe/if_media.h create mode 100644 Drivers/Net/MarvellYukonDxe/if_msk.c create mode 100644 Drivers/Net/MarvellYukonDxe/if_msk.h create mode 100644 Drivers/Net/MarvellYukonDxe/if_mskreg.h create mode 100644 Drivers/Net/MarvellYukonDxe/miivar.h

diff --git a/Drivers/Net/MarvellYukonDxe/e1000phy.c b/Drivers/Net/MarvellYukonDxe/e1000phy.c new file mode 100644 index 0000000..d544e88 --- /dev/null +++ b/Drivers/Net/MarvellYukonDxe/e1000phy.c @@ -0,0 +1,659 @@ +/** <at> file +* Support for Marvell 88E1000 Series PHYs +* +* Copyright (c) 2011-2016, ARM Limited. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ +/*- + * Principal Author: Parag Patel + * Copyright (c) 2001 + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice unmodified, this list of conditions, and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Additonal Copyright (c) 2001 by Traakan Software under same licence. + * Secondary Author: Matthew Jacob + */ + +/* + * driver for the Marvell 88E1000 series external 1000/100/10-BT PHY. + */ + +/* + * Support added for the Marvell 88E1011 (Alaska) 1000/100/10baseTX and + * 1000baseSX PHY. + * Nathan Binkert <nate <at> openbsd.org> + * Jung-uk Kim <jkim <at> niksun.com> + */ + +#include <Library/MemoryAllocationLib.h> +#include <Library/DebugLib.h> + +#include "if_media.h" + +#include "miivar.h" + +#include "e1000phyreg.h" + +static EFI_STATUS e1000phy_probe (const struct mii_attach_args *ma); +static void e1000phy_attach (const struct mii_attach_args *ma); +static const struct mii_phydesc * mii_phy_match (const struct mii_attach_args *ma, + const struct mii_phydesc *mpd); +static const struct mii_phydesc * mii_phy_match_gen (const struct mii_attach_args *ma, + const struct mii_phydesc *mpd, UINTN endlen); +static EFI_STATUS mii_phy_dev_probe (const struct mii_attach_args *ma, const struct mii_phydesc *mpd); + +struct e1000phy_softc { + struct mii_softc mii_sc; + INTN mii_model; + const struct msk_mii_data *mmd; +}; + +struct e1000phy_softc *mPhySoftc; + +static void mii_phy_update (INTN); +static void e1000phy_service (INTN); +static void e1000phy_status (struct mii_softc *); +static void e1000phy_reset (struct mii_softc *); +static void e1000phy_mii_phy_auto (void); + +static const struct mii_phydesc e1000phys[] = { + MII_PHY_DESC (MARVELL, E1000), + MII_PHY_DESC (MARVELL, E1011), + MII_PHY_DESC (MARVELL, E1000_3), + MII_PHY_DESC (MARVELL, E1000S), + MII_PHY_DESC (MARVELL, E1000_5), + MII_PHY_DESC (MARVELL, E1000_6), + MII_PHY_DESC (MARVELL, E3082), + MII_PHY_DESC (MARVELL, E1112), + MII_PHY_DESC (MARVELL, E1149), + MII_PHY_DESC (MARVELL, E1111), + MII_PHY_DESC (MARVELL, E1116), + MII_PHY_DESC (MARVELL, E1116R), + MII_PHY_DESC (MARVELL, E1118), + MII_PHY_DESC (MARVELL, E3016), + MII_PHY_DESC (MARVELL, PHYG65G), + MII_PHY_DESC (xxMARVELL, E1000), + MII_PHY_DESC (xxMARVELL, E1011), + MII_PHY_DESC (xxMARVELL, E1000_3), + MII_PHY_DESC (xxMARVELL, E1000_5), + MII_PHY_DESC (xxMARVELL, E1111), + MII_PHY_END +}; + +EFI_STATUS +e1000_probe_and_attach ( + struct mii_data *mii, + const struct msk_mii_data *mmd + ) +{ + struct mii_attach_args ma; + INTN bmsr; + EFI_STATUS Status; + + mPhySoftc = AllocateZeroPool (sizeof (struct e1000phy_softc)); + if (mPhySoftc == NULL) { + return EFI_OUT_OF_RESOURCES; + } + mPhySoftc->mmd = mmd; + + + /* + * Check to see if there is a PHY at this address. Note, + * many braindead PHYs report 0/0 in their ID registers, + * so we test for media in the BMSR. + */ + bmsr = PHY_READ (mPhySoftc, E1000_SR); + if (bmsr == 0 || bmsr == 0xffff || (bmsr & (E1000_SR_EXTENDED_STATUS|E1000_SR_MEDIAMASK)) == 0) { + /* Assume no PHY at this address. */ + FreePool (mPhySoftc); + return EFI_DEVICE_ERROR; + } + + /* + * Extract the IDs. + */ + ma.mii_id1 = PHY_READ (mPhySoftc, E1000_ID1); + ma.mii_id2 = PHY_READ (mPhySoftc, E1000_ID2); + + ma.mii_data = mii; + + Status = e1000phy_probe (&ma); + if (EFI_ERROR (Status)) { + FreePool (mPhySoftc); + return Status; + } + + e1000phy_attach (&ma); + return EFI_SUCCESS; +} + +EFI_STATUS +e1000phy_probe ( + const struct mii_attach_args *ma + ) +{ + return (mii_phy_dev_probe (ma, e1000phys)); +} + +static void +e1000phy_attach ( + const struct mii_attach_args *ma + ) +{ + struct mii_softc *sc; + + sc = &mPhySoftc->mii_sc; + sc->mii_pdata = ma->mii_data; + sc->mii_anegticks = MII_ANEGTICKS_GIGE; + + mPhySoftc->mii_model = MII_MODEL (ma->mii_id2); + + if (mPhySoftc->mmd != NULL && (mPhySoftc->mmd->mii_flags & MIIF_HAVEFIBER) != 0) { + sc->mii_flags |= MIIF_HAVEFIBER; + } + + switch (mPhySoftc->mii_model) { + case MII_MODEL_MARVELL_E1011: + case MII_MODEL_MARVELL_E1112: + if (PHY_READ (mPhySoftc, E1000_ESSR) & E1000_ESSR_FIBER_LINK) { + sc->mii_flags |= MIIF_HAVEFIBER; + } + break; + case MII_MODEL_MARVELL_E1149: + /* + * Some 88E1149 PHY's page select is initialized to + * point to other bank instead of copper/fiber bank + * which in turn resulted in wrong registers were + * accessed during PHY operation. It is believed that + * page 0 should be used for copper PHY so reinitialize + * E1000_EADR to select default copper PHY. If parent + * device know the type of PHY(either copper or fiber), + * that information should be used to select default + * type of PHY. + */ + PHY_WRITE (mPhySoftc, E1000_EADR, 0); + break; + } + + e1000phy_reset (sc); + + sc->mii_capabilities = PHY_READ (mPhySoftc, E1000_SR) & 0xFFFFFFFF; + if (sc->mii_capabilities & E1000_SR_EXTENDED_STATUS) { + sc->mii_extcapabilities = PHY_READ (mPhySoftc, E1000_ESR); + } +} + +static void +e1000phy_reset ( + struct mii_softc *sc + ) +{ + UINT16 reg; + UINT16 page; + + reg = PHY_READ (mPhySoftc, E1000_SCR); + if ((sc->mii_flags & MIIF_HAVEFIBER) != 0) { + reg &= ~E1000_SCR_AUTO_X_MODE; + PHY_WRITE (mPhySoftc, E1000_SCR, reg); + if (mPhySoftc->mii_model == MII_MODEL_MARVELL_E1112) { + // Select 1000BASE-X only mode. + page = PHY_READ (mPhySoftc, E1000_EADR); + PHY_WRITE (mPhySoftc, E1000_EADR, 2); + reg = PHY_READ (mPhySoftc, E1000_SCR); + reg &= ~E1000_SCR_MODE_MASK; + reg |= E1000_SCR_MODE_1000BX; + PHY_WRITE (mPhySoftc, E1000_SCR, reg); + if (mPhySoftc->mmd != NULL && mPhySoftc->mmd->pmd == 'P') { + // Set SIGDET polarity low for SFP module + PHY_WRITE (mPhySoftc, E1000_EADR, 1); + reg = PHY_READ (mPhySoftc, E1000_SCR); + reg |= E1000_SCR_FIB_SIGDET_POLARITY; + PHY_WRITE (mPhySoftc, E1000_SCR, reg); + } + PHY_WRITE (mPhySoftc, E1000_EADR, page); + } + } else { + switch (mPhySoftc->mii_model) { + case MII_MODEL_MARVELL_E1111: + case MII_MODEL_MARVELL_E1112: + case MII_MODEL_MARVELL_E1116: + case MII_MODEL_MARVELL_E1118: + case MII_MODEL_MARVELL_E1149: + case MII_MODEL_MARVELL_PHYG65G: + // Disable energy detect mode + reg &= ~E1000_SCR_EN_DETECT_MASK; + reg |= E1000_SCR_AUTO_X_MODE; + if (mPhySoftc->mii_model == MII_MODEL_MARVELL_E1116) + reg &= ~E1000_SCR_POWER_DOWN; + reg |= E1000_SCR_ASSERT_CRS_ON_TX; + break; + case MII_MODEL_MARVELL_E3082: + reg |= (E1000_SCR_AUTO_X_MODE >> 1); + reg |= E1000_SCR_ASSERT_CRS_ON_TX; + break; + case MII_MODEL_MARVELL_E3016: + reg |= E1000_SCR_AUTO_MDIX; + reg &= ~(E1000_SCR_EN_DETECT | + E1000_SCR_SCRAMBLER_DISABLE); + reg |= E1000_SCR_LPNP; + // XXX Enable class A driver for Yukon FE+ A0 + PHY_WRITE (mPhySoftc, 0x1C, PHY_READ (mPhySoftc, 0x1C) | 0x0001); + break; + default: + reg &= ~E1000_SCR_AUTO_X_MODE; + reg |= E1000_SCR_ASSERT_CRS_ON_TX; + break; + } + if (mPhySoftc->mii_model != MII_MODEL_MARVELL_E3016) { + /* Auto correction for reversed cable polarity. */ + reg &= ~E1000_SCR_POLARITY_REVERSAL; + } + PHY_WRITE (mPhySoftc, E1000_SCR, reg); + + if (mPhySoftc->mii_model == MII_MODEL_MARVELL_E1116 || + mPhySoftc->mii_model == MII_MODEL_MARVELL_E1149) { + PHY_WRITE (mPhySoftc, E1000_EADR, 2); + reg = PHY_READ (mPhySoftc, E1000_SCR); + reg |= E1000_SCR_RGMII_POWER_UP; + PHY_WRITE (mPhySoftc, E1000_SCR, reg); + PHY_WRITE (mPhySoftc, E1000_EADR, 0); + } + } + + switch (mPhySoftc->mii_model) { + case MII_MODEL_MARVELL_E3082: + case MII_MODEL_MARVELL_E1112: + case MII_MODEL_MARVELL_E1118: + break; + case MII_MODEL_MARVELL_E1116: + page = PHY_READ (mPhySoftc, E1000_EADR); + /* Select page 3, LED control register. */ + PHY_WRITE (mPhySoftc, E1000_EADR, 3); + PHY_WRITE (mPhySoftc, E1000_SCR, + E1000_SCR_LED_LOS (1) | /* Link/Act */ + E1000_SCR_LED_INIT (8) | /* 10Mbps */ + E1000_SCR_LED_STAT1 (7) | /* 100Mbps */ + E1000_SCR_LED_STAT0 (7)); /* 1000Mbps */ + /* Set blink rate. */ + PHY_WRITE (mPhySoftc, E1000_IER, E1000_PULSE_DUR (E1000_PULSE_170MS) | E1000_BLINK_RATE (E1000_BLINK_84MS)); + PHY_WRITE (mPhySoftc, E1000_EADR, page); + break; + case MII_MODEL_MARVELL_E3016: + /* LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED. */ + PHY_WRITE (mPhySoftc, 0x16, 0x0B << 8 | 0x05 << 4 | 0x04); + /* Integrated register calibration workaround. */ + PHY_WRITE (mPhySoftc, 0x1D, 17); + PHY_WRITE (mPhySoftc, 0x1E, 0x3F60); + break; + default: + /* Force TX_CLK to 25MHz clock. */ + reg = PHY_READ (mPhySoftc, E1000_ESCR); + reg |= E1000_ESCR_TX_CLK_25; + PHY_WRITE (mPhySoftc, E1000_ESCR, reg); + break; + } + + /* Reset the PHY so all changes take effect. */ + reg = PHY_READ (mPhySoftc, E1000_CR); + reg |= E1000_CR_RESET; + PHY_WRITE (mPhySoftc, E1000_CR, reg); +} + +static void +mii_phy_update ( + INTN cmd + ) +{ + struct mii_softc *sc = &mPhySoftc->mii_sc; + struct mii_data *mii = sc->mii_pdata; + + if (sc->mii_media_active != mii->mii_media_active || + sc->mii_media_status != mii->mii_media_status || + cmd == MII_MEDIACHG) + { + msk_miibus_statchg (mPhySoftc->mmd->port); + sc->mii_media_active = mii->mii_media_active; + sc->mii_media_status = mii->mii_media_status; + } +} + +void +e1000phy_tick ( + VOID + ) +{ + e1000phy_service (MII_TICK); +} + +void +e1000phy_mediachg ( + VOID + ) +{ + struct mii_data *mii = mPhySoftc->mii_sc.mii_pdata; + mii->mii_media_status = 0; + mii->mii_media_active = IFM_NONE; + e1000phy_service (MII_MEDIACHG); +} + +static void +e1000phy_service ( + INTN cmd + ) +{ + struct mii_softc *sc = &mPhySoftc->mii_sc; + INTN reg; + + switch (cmd) { + case MII_POLLSTAT: + break; + + case MII_MEDIACHG: + // + // Always try to auto-negotiate + // + e1000phy_mii_phy_auto (); + break; + + /* speed = 0; + switch (IFM_SUBTYPE (ife->ifm_media)) { + case IFM_1000_T: + if ((sc->mii_extcapabilities & + (EXTSR_1000TFDX | EXTSR_1000THDX)) == 0) + return (EINVAL); + speed = E1000_CR_SPEED_1000; + break; + case IFM_1000_SX: + if ((sc->mii_extcapabilities & + (EXTSR_1000XFDX | EXTSR_1000XHDX)) == 0) + return (EINVAL); + speed = E1000_CR_SPEED_1000; + break; + case IFM_100_TX: + speed = E1000_CR_SPEED_100; + break; + case IFM_10_T: + speed = E1000_CR_SPEED_10; + break; + case IFM_NONE: + reg = PHY_READ (sc, E1000_CR); + PHY_WRITE (sc, E1000_CR, + reg | E1000_CR_ISOLATE | E1000_CR_POWER_DOWN); + goto done; + default: + return (EINVAL); + } + + if (((ife->ifm_media & IFM_GMASK) & IFM_FDX) != 0) { + speed |= E1000_CR_FULL_DUPLEX; + gig = E1000_1GCR_1000T_FD; + } else + gig = E1000_1GCR_1000T; + + reg = PHY_READ (sc, E1000_CR); + reg &= ~E1000_CR_AUTO_NEG_ENABLE; + PHY_WRITE (sc, E1000_CR, reg | E1000_CR_RESET); +*/ + /* + * When setting the link manually, one side must + * be the master and the other the slave. However + * ifmedia doesn't give us a good way to specify + * this, so we fake it by using one of the LINK + * flags. If LINK0 is set, we program the PHY to + * be a master, otherwise it's a slave. + */ + /* if (IFM_SUBTYPE (ife->ifm_media) == IFM_1000_T || + (IFM_SUBTYPE (ife->ifm_media) == IFM_1000_SX)) { + if ((mii->mii_ifp->if_flags & IFF_LINK0)) + PHY_WRITE (sc, E1000_1GCR, gig | + E1000_1GCR_MS_ENABLE | E1000_1GCR_MS_VALUE); + else + PHY_WRITE (sc, E1000_1GCR, gig | + E1000_1GCR_MS_ENABLE); + } else { + if ((sc->mii_extcapabilities & + (EXTSR_1000TFDX | EXTSR_1000THDX)) != 0) + PHY_WRITE (sc, E1000_1GCR, 0); + } + PHY_WRITE (sc, E1000_AR, E1000_AR_SELECTOR_FIELD); + PHY_WRITE (sc, E1000_CR, speed | E1000_CR_RESET); +done: + break;*/ + case MII_TICK: + /* + * Only used for autonegotiation. + */ + /* if (IFM_SUBTYPE (ife->ifm_media) != IFM_AUTO) { + sc->mii_ticks = 0; + break; + }*/ + + /* + * check for link. + * Read the status register twice; Link Status is latch-low. + */ + reg = PHY_READ (mPhySoftc, E1000_SR) | PHY_READ (mPhySoftc, E1000_SR); + if (reg & E1000_SR_LINK_STATUS) { + sc->mii_ticks = 0; + break; + } + + /* Announce link loss right after it happens. */ + if (sc->mii_ticks++ == 0) { + break; + } + if (sc->mii_ticks <= sc->mii_anegticks) { + break; + } + + // + // Restart the auto-negotiation + // + sc->mii_ticks = 0; + e1000phy_reset (sc); + e1000phy_mii_phy_auto (); + break; + } + + /* Update the media status. */ + e1000phy_status (sc); + + /* Callback if something changed. */ + mii_phy_update (cmd); +} + +static void +e1000phy_status ( + struct mii_softc *sc + ) +{ + struct mii_data *mii = sc->mii_pdata; + INTN bmcr; + INTN bmsr; + INTN gsr; + INTN ssr; + INTN ar; + INTN lpar; + + mii->mii_media_status = IFM_AVALID; + mii->mii_media_active = IFM_ETHER; + + bmsr = PHY_READ (mPhySoftc, E1000_SR) | PHY_READ (mPhySoftc, E1000_SR); + bmcr = PHY_READ (mPhySoftc, E1000_CR); + ssr = PHY_READ (mPhySoftc, E1000_SSR); + + if (bmsr & E1000_SR_LINK_STATUS) { + DEBUG ((EFI_D_NET, "Marvell Yukon: e1000phy_status, link up\n")); + mii->mii_media_status |= IFM_ACTIVE; + } + + if (bmcr & E1000_CR_LOOPBACK) { + mii->mii_media_active |= IFM_LOOP; + } + + if ((bmcr & E1000_CR_AUTO_NEG_ENABLE) != 0 && (ssr & E1000_SSR_SPD_DPLX_RESOLVED) == 0) { + /* Erg, still trying, I guess... */ + DEBUG ((EFI_D_NET, "Marvell Yukon: e1000phy_status, auto negotiation not complete\n")); + mii->mii_media_active |= IFM_NONE; + return; + } + + if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { + switch (ssr & E1000_SSR_SPEED) { + case E1000_SSR_1000MBS: + mii->mii_media_active |= IFM_1000_T; + break; + case E1000_SSR_100MBS: + mii->mii_media_active |= IFM_100_TX; + break; + case E1000_SSR_10MBS: + mii->mii_media_active |= IFM_10_T; + break; + default: + mii->mii_media_active |= IFM_NONE; + return; + } + } else { + /* + * Some fiber PHY(88E1112) does not seem to set resolved + * speed so always assume we've got IFM_1000_SX. + */ + mii->mii_media_active |= IFM_1000_SX; + } + + if (ssr & E1000_SSR_DUPLEX) { + mii->mii_media_active |= IFM_FDX; + } else { + mii->mii_media_active |= IFM_HDX; + } + + if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { + ar = PHY_READ (mPhySoftc, E1000_AR); + lpar = PHY_READ (mPhySoftc, E1000_LPAR); + /* FLAG0==rx-flow-control FLAG1==tx-flow-control */ + if ((ar & E1000_AR_PAUSE) && (lpar & E1000_LPAR_PAUSE)) { + mii->mii_media_active |= IFM_FLAG0 | IFM_FLAG1; + } else if (!(ar & E1000_AR_PAUSE) && (ar & E1000_AR_ASM_DIR) && + (lpar & E1000_LPAR_PAUSE) && (lpar & E1000_LPAR_ASM_DIR)) { + mii->mii_media_active |= IFM_FLAG1; + } else if ((ar & E1000_AR_PAUSE) && (ar & E1000_AR_ASM_DIR) && + !(lpar & E1000_LPAR_PAUSE) && (lpar & E1000_LPAR_ASM_DIR)) { + mii->mii_media_active |= IFM_FLAG0; + } + } + + /* FLAG2 : local PHY resolved to MASTER */ + if ((IFM_SUBTYPE (mii->mii_media_active) == IFM_1000_T) || + (IFM_SUBTYPE (mii->mii_media_active) == IFM_1000_SX)) { + PHY_READ (mPhySoftc, E1000_1GSR); + gsr = PHY_READ (mPhySoftc, E1000_1GSR); + if ((gsr & E1000_1GSR_MS_CONFIG_RES) != 0) { + mii->mii_media_active |= IFM_FLAG2; + } + } +} + +static void +e1000phy_mii_phy_auto ( + VOID + ) +{ + struct mii_softc *sc; + UINT16 reg; + + DEBUG ((EFI_D_NET, "Marvell Yukon: e1000phy_mii_phy_auto negotiation started\n")); + sc = &mPhySoftc->mii_sc; + if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { + reg = PHY_READ (mPhySoftc, E1000_AR); + reg |= E1000_AR_10T | E1000_AR_10T_FD | + E1000_AR_100TX | E1000_AR_100TX_FD | + E1000_AR_PAUSE | E1000_AR_ASM_DIR; + PHY_WRITE (mPhySoftc, E1000_AR, reg | E1000_AR_SELECTOR_FIELD); + } else { + PHY_WRITE (mPhySoftc, E1000_AR, E1000_FA_1000X_FD | E1000_FA_1000X | E1000_FA_SYM_PAUSE | E1000_FA_ASYM_PAUSE); + } + + if ((sc->mii_extcapabilities & (E1000_ESR_1000T_FD | E1000_ESR_1000T)) != 0) { + PHY_WRITE (mPhySoftc, E1000_1GCR, E1000_1GCR_1000T_FD | E1000_1GCR_1000T); + } + + PHY_WRITE (mPhySoftc, E1000_CR, E1000_CR_AUTO_NEG_ENABLE | E1000_CR_RESTART_AUTO_NEG); +} + +// +// Generic helper functions +// + +const struct mii_phydesc * + mii_phy_match_gen ( + const struct mii_attach_args *ma, + const struct mii_phydesc *mpd, + UINTN len + ) +{ + + for (; mpd->mpd_name != NULL; + mpd = (const struct mii_phydesc *) ((const CHAR8 *) mpd + len)) { + if (MII_OUI (ma->mii_id1, ma->mii_id2) == mpd->mpd_oui && + MII_MODEL (ma->mii_id2) == mpd->mpd_model) { + return (mpd); + } + } + return (NULL); +} + +const struct mii_phydesc * + mii_phy_match ( + const struct mii_attach_args *ma, + const struct mii_phydesc *mpd + ) +{ + + return (mii_phy_match_gen (ma, mpd, sizeof (struct mii_phydesc))); +} + +EFI_STATUS +mii_phy_dev_probe ( + const struct mii_attach_args *ma, + const struct mii_phydesc *mpd + ) +{ + + mpd = mii_phy_match (ma, mpd); + if (mpd != NULL) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Found PHY (%a)\n", mpd->mpd_name)); + return EFI_SUCCESS; + } + + DEBUG ((EFI_D_NET, "Marvell Yukon: PHY not found (OUI=0x%x, MODEL=0x%x)\n", MII_OUI (ma->mii_id1, ma->mii_id2), MII_MODEL (ma->mii_id2))); + return EFI_NOT_FOUND; +} diff --git a/Drivers/Net/MarvellYukonDxe/e1000phyreg.h b/Drivers/Net/MarvellYukonDxe/e1000phyreg.h new file mode 100644 index 0000000..f90ab51 --- /dev/null +++ b/Drivers/Net/MarvellYukonDxe/e1000phyreg.h @@ -0,0 +1,398 @@ +/** <at> file +* Registers and Macros for Marvell 88E1000 Series PHYs. Ported from FreeBSD. +* +* Copyright (c) 2011-2016, ARM Limited. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ +/* $FreeBSD: src/sys/dev/mii/e1000phyreg.h,v 1.7.2.2.2.1 2010/06/14 02:09:06 kensmith Exp $ */ +/*- + * Principal Author: Parag Patel + * Copyright (c) 2001 + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice unmodified, this list of conditions, and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Additonal Copyright (c) 2001 by Traakan Software under same licence. + * Secondary Author: Matthew Jacob + */ + +/*- + * Derived by information released by Intel under the following license: + * + * Copyright (c) 1999 - 2001, Intel Corporation + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * 3. Neither the name of Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL CONTRIBUTORS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* + * Marvell E1000 PHY registers + */ + +#define E1000_MAX_REG_ADDRESS 0x1F + +#define E1000_CR 0x00 /* control register */ +#define E1000_CR_SPEED_SELECT_MSB 0x0040 +#define E1000_CR_COLL_TEST_ENABLE 0x0080 +#define E1000_CR_FULL_DUPLEX 0x0100 +#define E1000_CR_RESTART_AUTO_NEG 0x0200 +#define E1000_CR_ISOLATE 0x0400 +#define E1000_CR_POWER_DOWN 0x0800 +#define E1000_CR_AUTO_NEG_ENABLE 0x1000 +#define E1000_CR_SPEED_SELECT_LSB 0x2000 +#define E1000_CR_LOOPBACK 0x4000 +#define E1000_CR_RESET 0x8000 + +#define E1000_CR_SPEED_1000 0x0040 +#define E1000_CR_SPEED_100 0x2000 +#define E1000_CR_SPEED_10 0x0000 + +#define E1000_SR 0x01 /* status register */ +#define E1000_SR_EXTENDED 0x0001 +#define E1000_SR_JABBER_DETECT 0x0002 +#define E1000_SR_LINK_STATUS 0x0004 +#define E1000_SR_AUTO_NEG 0x0008 +#define E1000_SR_REMOTE_FAULT 0x0010 +#define E1000_SR_AUTO_NEG_COMPLETE 0x0020 +#define E1000_SR_PREAMBLE_SUPPRESS 0x0040 +#define E1000_SR_EXTENDED_STATUS 0x0100 +#define E1000_SR_100T2 0x0200 +#define E1000_SR_100T2_FD 0x0400 +#define E1000_SR_10T 0x0800 +#define E1000_SR_10T_FD 0x1000 +#define E1000_SR_100TX 0x2000 +#define E1000_SR_100TX_FD 0x4000 +#define E1000_SR_100T4 0x8000 +#define E1000_SR_MEDIAMASK (E1000_SR_100T4|E1000_SR_100TX_FD|E1000_SR_100TX| \ + E1000_SR_10T_FD|E1000_SR_10T|E1000_SR_100T2_FD|E1000_SR_100T2) + +#define E1000_ID1 0x02 /* ID register 1 */ +#define E1000_ID2 0x03 /* ID register 2 */ +#define E1000_ID_88E1000 0x01410C50 +#define E1000_ID_88E1000S 0x01410C40 +#define E1000_ID_88E1011 0x01410C20 +#define E1000_ID_MASK 0xFFFFFFF0 + +#define IDR2_OUILSB 0xfc00 /* OUI LSB */ +#define IDR2_MODEL 0x03f0 /* vendor model */ +#define IDR2_REV 0x000f /* vendor revision */ +#define MII_OUI(id1, id2) (((id1) << 6) | ((id2) >> 10)) +#define MII_MODEL(id2) (((id2) & IDR2_MODEL) >> 4) +#define MII_REV(id2) ((id2) & IDR2_REV) + + +#define E1000_AR 0x04 /* autonegotiation advertise reg */ +#define E1000_AR_SELECTOR_FIELD 0x0001 +#define E1000_AR_10T 0x0020 +#define E1000_AR_10T_FD 0x0040 +#define E1000_AR_100TX 0x0080 +#define E1000_AR_100TX_FD 0x0100 +#define E1000_AR_100T4 0x0200 +#define E1000_AR_PAUSE 0x0400 +#define E1000_AR_ASM_DIR 0x0800 +#define E1000_AR_REMOTE_FAULT 0x2000 +#define E1000_AR_NEXT_PAGE 0x8000 +#define E1000_AR_SPEED_MASK 0x01E0 + +/* Autonegotiation register bits for fiber cards (Alaska Only!) */ +#define E1000_FA_1000X_FD 0x0020 +#define E1000_FA_1000X 0x0040 +#define E1000_FA_SYM_PAUSE 0x0080 +#define E1000_FA_ASYM_PAUSE 0x0100 +#define E1000_FA_FAULT1 0x1000 +#define E1000_FA_FAULT2 0x2000 +#define E1000_FA_NEXT_PAGE 0x8000 + +#define E1000_LPAR 0x05 /* autoneg link partner abilities reg */ +#define E1000_LPAR_SELECTOR_FIELD 0x0001 +#define E1000_LPAR_10T 0x0020 +#define E1000_LPAR_10T_FD 0x0040 +#define E1000_LPAR_100TX 0x0080 +#define E1000_LPAR_100TX_FD 0x0100 +#define E1000_LPAR_100T4 0x0200 +#define E1000_LPAR_PAUSE 0x0400 +#define E1000_LPAR_ASM_DIR 0x0800 +#define E1000_LPAR_REMOTE_FAULT 0x2000 +#define E1000_LPAR_ACKNOWLEDGE 0x4000 +#define E1000_LPAR_NEXT_PAGE 0x8000 + +/* autoneg link partner ability register bits for fiber cards (Alaska Only!) */ +#define E1000_FPAR_1000X_FD 0x0020 +#define E1000_FPAR_1000X 0x0040 +#define E1000_FPAR_SYM_PAUSE 0x0080 +#define E1000_FPAR_ASYM_PAUSE 0x0100 +#define E1000_FPAR_FAULT1 0x1000 +#define E1000_FPAR_FAULT2 0x2000 +#define E1000_FPAR_ACK 0x4000 +#define E1000_FPAR_NEXT_PAGE 0x8000 + +#define E1000_ER 0x06 /* autoneg expansion reg */ +#define E1000_ER_LP_NWAY 0x0001 +#define E1000_ER_PAGE_RXD 0x0002 +#define E1000_ER_NEXT_PAGE 0x0004 +#define E1000_ER_LP_NEXT_PAGE 0x0008 +#define E1000_ER_PAR_DETECT_FAULT 0x0100 + +#define E1000_NPTX 0x07 /* autoneg next page TX */ +#define E1000_NPTX_MSG_CODE_FIELD 0x0001 +#define E1000_NPTX_TOGGLE 0x0800 +#define E1000_NPTX_ACKNOWLDGE2 0x1000 +#define E1000_NPTX_MSG_PAGE 0x2000 +#define E1000_NPTX_NEXT_PAGE 0x8000 + +#define E1000_RNPR 0x08 /* autoneg link-partner (?) next page */ +#define E1000_RNPR_MSG_CODE_FIELD 0x0001 +#define E1000_RNPR_TOGGLE 0x0800 +#define E1000_RNPR_ACKNOWLDGE2 0x1000 +#define E1000_RNPR_MSG_PAGE 0x2000 +#define E1000_RNPR_ACKNOWLDGE 0x4000 +#define E1000_RNPR_NEXT_PAGE 0x8000 + +#define E1000_1GCR 0x09 /* 1000T (1G) control reg */ +#define E1000_1GCR_ASYM_PAUSE 0x0080 +#define E1000_1GCR_1000T 0x0100 +#define E1000_1GCR_1000T_FD 0x0200 +#define E1000_1GCR_REPEATER_DTE 0x0400 +#define E1000_1GCR_MS_VALUE 0x0800 +#define E1000_1GCR_MS_ENABLE 0x1000 +#define E1000_1GCR_TEST_MODE_NORMAL 0x0000 +#define E1000_1GCR_TEST_MODE_1 0x2000 +#define E1000_1GCR_TEST_MODE_2 0x4000 +#define E1000_1GCR_TEST_MODE_3 0x6000 +#define E1000_1GCR_TEST_MODE_4 0x8000 +#define E1000_1GCR_SPEED_MASK 0x0300 + +#define E1000_1GSR 0x0A /* 1000T (1G) status reg */ +#define E1000_1GSR_IDLE_ERROR_CNT 0x0000 +#define E1000_1GSR_ASYM_PAUSE_DIR 0x0100 +#define E1000_1GSR_LP 0x0400 +#define E1000_1GSR_LP_FD 0x0800 +#define E1000_1GSR_REMOTE_RX_STATUS 0x1000 +#define E1000_1GSR_LOCAL_RX_STATUS 0x2000 +#define E1000_1GSR_MS_CONFIG_RES 0x4000 +#define E1000_1GSR_MS_CONFIG_FAULT 0x8000 + +#define E1000_ESR 0x0F /* IEEE extended status reg */ +#define E1000_ESR_1000T 0x1000 +#define E1000_ESR_1000T_FD 0x2000 +#define E1000_ESR_1000X 0x4000 +#define E1000_ESR_1000X_FD 0x8000 + +#define E1000_TX_POLARITY_MASK 0x0100 +#define E1000_TX_NORMAL_POLARITY 0 + +#define E1000_AUTO_POLARITY_DISABLE 0x0010 + +#define E1000_SCR 0x10 /* special control register */ +#define E1000_SCR_JABBER_DISABLE 0x0001 +#define E1000_SCR_POLARITY_REVERSAL 0x0002 +#define E1000_SCR_SQE_TEST 0x0004 +#define E1000_SCR_INT_FIFO_DISABLE 0x0008 +#define E1000_SCR_CLK125_DISABLE 0x0010 +#define E1000_SCR_MDI_MANUAL_MODE 0x0000 +#define E1000_SCR_MDIX_MANUAL_MODE 0x0020 +#define E1000_SCR_AUTO_X_1000T 0x0040 +#define E1000_SCR_AUTO_X_MODE 0x0060 +#define E1000_SCR_10BT_EXT_ENABLE 0x0080 +#define E1000_SCR_MII_5BIT_ENABLE 0x0100 +#define E1000_SCR_SCRAMBLER_DISABLE 0x0200 +#define E1000_SCR_FORCE_LINK_GOOD 0x0400 +#define E1000_SCR_ASSERT_CRS_ON_TX 0x0800 +#define E1000_SCR_RX_FIFO_DEPTH_6 0x0000 +#define E1000_SCR_RX_FIFO_DEPTH_8 0x1000 +#define E1000_SCR_RX_FIFO_DEPTH_10 0x2000 +#define E1000_SCR_RX_FIFO_DEPTH_12 0x3000 +#define E1000_SCR_TX_FIFO_DEPTH_6 0x0000 +#define E1000_SCR_TX_FIFO_DEPTH_8 0x4000 +#define E1000_SCR_TX_FIFO_DEPTH_10 0x8000 +#define E1000_SCR_TX_FIFO_DEPTH_12 0xC000 + +/* 88E3016 only */ +#define E1000_SCR_AUTO_MDIX 0x0030 +#define E1000_SCR_SIGDET_POLARITY 0x0040 +#define E1000_SCR_EXT_DISTANCE 0x0080 +#define E1000_SCR_FEFI_DISABLE 0x0100 +#define E1000_SCR_NLP_GEN_DISABLE 0x0800 +#define E1000_SCR_LPNP 0x1000 +#define E1000_SCR_NLP_CHK_DISABLE 0x2000 +#define E1000_SCR_EN_DETECT 0x4000 + +#define E1000_SCR_EN_DETECT_MASK 0x0300 + +/* 88E1112 page 1 fiber specific control */ +#define E1000_SCR_FIB_TX_DIS 0x0008 +#define E1000_SCR_FIB_SIGDET_POLARITY 0x0200 +#define E1000_SCR_FIB_FORCE_LINK 0x0400 + +/* 88E1112 page 2 */ +#define E1000_SCR_MODE_MASK 0x0380 +#define E1000_SCR_MODE_AUTO 0x0180 +#define E1000_SCR_MODE_COPPER 0x0280 +#define E1000_SCR_MODE_1000BX 0x0380 + +/* 88E1116 page 0 */ +#define E1000_SCR_POWER_DOWN 0x0004 +/* 88E1116, 88E1149 page 2 */ +#define E1000_SCR_RGMII_POWER_UP 0x0008 + +/* 88E1116, 88E1149 page 3 */ +#define E1000_SCR_LED_STAT0_MASK 0x000F +#define E1000_SCR_LED_STAT1_MASK 0x00F0 +#define E1000_SCR_LED_INIT_MASK 0x0F00 +#define E1000_SCR_LED_LOS_MASK 0xF000 +#define E1000_SCR_LED_STAT0(x) ((x) & E1000_SCR_LED_STAT0_MASK) +#define E1000_SCR_LED_STAT1(x) ((x) & E1000_SCR_LED_STAT1_MASK) +#define E1000_SCR_LED_INIT(x) ((x) & E1000_SCR_LED_INIT_MASK) +#define E1000_SCR_LED_LOS(x) ((x) & E1000_SCR_LED_LOS_MASK) + +#define E1000_SSR 0x11 /* special status register */ +#define E1000_SSR_JABBER 0x0001 +#define E1000_SSR_REV_POLARITY 0x0002 +#define E1000_SSR_MDIX 0x0020 +#define E1000_SSR_LINK 0x0400 +#define E1000_SSR_SPD_DPLX_RESOLVED 0x0800 +#define E1000_SSR_PAGE_RCVD 0x1000 +#define E1000_SSR_DUPLEX 0x2000 +#define E1000_SSR_SPEED 0xC000 +#define E1000_SSR_10MBS 0x0000 +#define E1000_SSR_100MBS 0x4000 +#define E1000_SSR_1000MBS 0x8000 + +#define E1000_IER 0x12 /* interrupt enable reg */ +#define E1000_IER_JABBER 0x0001 +#define E1000_IER_POLARITY_CHANGE 0x0002 +#define E1000_IER_MDIX_CHANGE 0x0040 +#define E1000_IER_FIFO_OVER_UNDERUN 0x0080 +#define E1000_IER_FALSE_CARRIER 0x0100 +#define E1000_IER_SYMBOL_ERROR 0x0200 +#define E1000_IER_LINK_STAT_CHANGE 0x0400 +#define E1000_IER_AUTO_NEG_COMPLETE 0x0800 +#define E1000_IER_PAGE_RECEIVED 0x1000 +#define E1000_IER_DUPLEX_CHANGED 0x2000 +#define E1000_IER_SPEED_CHANGED 0x4000 +#define E1000_IER_AUTO_NEG_ERR 0x8000 + +/* 88E1116, 88E1149 page 3, LED timer control. */ +#define E1000_PULSE_MASK 0x7000 +#define E1000_PULSE_NO_STR 0 /* no pulse stretching */ +#define E1000_PULSE_21MS 1 /* 21 ms to 42 ms */ +#define E1000_PULSE_42MS 2 /* 42 ms to 84 ms */ +#define E1000_PULSE_84MS 3 /* 84 ms to 170 ms */ +#define E1000_PULSE_170MS 4 /* 170 ms to 340 ms */ +#define E1000_PULSE_340MS 5 /* 340 ms to 670 ms */ +#define E1000_PULSE_670MS 6 /* 670 ms to 1300 ms */ +#define E1000_PULSE_1300MS 7 /* 1300 ms to 2700 ms */ +#define E1000_PULSE_DUR(x) ((x) & E1000_PULSE_MASK) + +#define E1000_BLINK_MASK 0x0700 +#define E1000_BLINK_42MS 0 /* 42 ms */ +#define E1000_BLINK_84MS 1 /* 84 ms */ +#define E1000_BLINK_170MS 2 /* 170 ms */ +#define E1000_BLINK_340MS 3 /* 340 ms */ +#define E1000_BLINK_670MS 4 /* 670 ms */ +#define E1000_BLINK_RATE(x) ((x) & E1000_BLINK_MASK) + +#define E1000_ISR 0x13 /* interrupt status reg */ +#define E1000_ISR_JABBER 0x0001 +#define E1000_ISR_POLARITY_CHANGE 0x0002 +#define E1000_ISR_MDIX_CHANGE 0x0040 +#define E1000_ISR_FIFO_OVER_UNDERUN 0x0080 +#define E1000_ISR_FALSE_CARRIER 0x0100 +#define E1000_ISR_SYMBOL_ERROR 0x0200 +#define E1000_ISR_LINK_STAT_CHANGE 0x0400 +#define E1000_ISR_AUTO_NEG_COMPLETE 0x0800 +#define E1000_ISR_PAGE_RECEIVED 0x1000 +#define E1000_ISR_DUPLEX_CHANGED 0x2000 +#define E1000_ISR_SPEED_CHANGED 0x4000 +#define E1000_ISR_AUTO_NEG_ERR 0x8000 + +#define E1000_ESCR 0x14 /* extended special control reg */ +#define E1000_ESCR_FIBER_LOOPBACK 0x4000 +#define E1000_ESCR_DOWN_NO_IDLE 0x8000 +#define E1000_ESCR_TX_CLK_2_5 0x0060 +#define E1000_ESCR_TX_CLK_25 0x0070 +#define E1000_ESCR_TX_CLK_0 0x0000 + +#define E1000_RECR 0x15 /* RX error counter reg */ + +#define E1000_EADR 0x16 /* extended address reg */ + +#define E1000_LCR 0x18 /* LED control reg */ +#define E1000_LCR_LED_TX 0x0001 +#define E1000_LCR_LED_RX 0x0002 +#define E1000_LCR_LED_DUPLEX 0x0004 +#define E1000_LCR_LINK 0x0008 +#define E1000_LCR_BLINK_42MS 0x0000 +#define E1000_LCR_BLINK_84MS 0x0100 +#define E1000_LCR_BLINK_170MS 0x0200 +#define E1000_LCR_BLINK_340MS 0x0300 +#define E1000_LCR_BLINK_670MS 0x0400 +#define E1000_LCR_PULSE_OFF 0x0000 +#define E1000_LCR_PULSE_21_42MS 0x1000 +#define E1000_LCR_PULSE_42_84MS 0x2000 +#define E1000_LCR_PULSE_84_170MS 0x3000 +#define E1000_LCR_PULSE_170_340MS 0x4000 +#define E1000_LCR_PULSE_340_670MS 0x5000 +#define E1000_LCR_PULSE_670_13S 0x6000 +#define E1000_LCR_PULSE_13_26S 0x7000 + +/* The following register is found only on the 88E1011 Alaska PHY */ +#define E1000_ESSR 0x1B /* Extended PHY specific sts */ +#define E1000_ESSR_FIBER_LINK 0x2000 +#define E1000_ESSR_GMII_COPPER 0x000f +#define E1000_ESSR_GMII_FIBER 0x0007 +#define E1000_ESSR_TBI_COPPER 0x000d +#define E1000_ESSR_TBI_FIBER 0x0005 diff --git a/Drivers/Net/MarvellYukonDxe/if_media.h b/Drivers/Net/MarvellYukonDxe/if_media.h new file mode 100644 index 0000000..00f5f7f --- /dev/null +++ b/Drivers/Net/MarvellYukonDxe/if_media.h @@ -0,0 +1,273 @@ +/** <at> file +* Prototypes and definitions for BSD/OS-compatible network interface media selection. +* +* Copyright (c) 2011-2016, ARM Limited. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ +/* $NetBSD: if_media.h,v 1.3 1997/03/26 01:19:27 thorpej Exp $ */ +/* $FreeBSD: src/sys/net/if_media.h,v 1.47.2.1.4.1 2010/06/14 02:09:06 kensmith Exp $ */ + +/*- + * Copyright (c) 1997 + * Jonathan Stone and Jason R. Thorpe. All rights reserved. + * + * This software is derived from information provided by Matt Thomas. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Jonathan Stone + * and Jason R. Thorpe for the NetBSD Project. + * 4. The names of the authors may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef _NET_IF_MEDIA_H_ +#define _NET_IF_MEDIA_H_ + +/* + * Prototypes and definitions for BSD/OS-compatible network interface + * media selection. + * + * Where it is safe to do so, this code strays slightly from the BSD/OS + * design. Software which uses the API (device drivers, basically) + * shouldn't notice any difference. + * + * Many thanks to Matt Thomas for providing the information necessary + * to implement this interface. + */ + +/* + * if_media Options word: + * Bits Use + * ---- ------- + * 0-4 Media variant + * 5-7 Media type + * 8-15 Type specific options + * 16-18 Mode (for multi-mode devices) + * 19 RFU + * 20-27 Shared (global) options + * 28-31 Instance + */ + +/* + * Ethernet + */ +#define IFM_ETHER 0x00000020 +#define IFM_10_T 3 /* 10BaseT - RJ45 */ +#define IFM_10_2 4 /* 10Base2 - Thinnet */ +#define IFM_10_5 5 /* 10Base5 - AUI */ +#define IFM_100_TX 6 /* 100BaseTX - RJ45 */ +#define IFM_100_FX 7 /* 100BaseFX - Fiber */ +#define IFM_100_T4 8 /* 100BaseT4 - 4 pair cat 3 */ +#define IFM_100_VG 9 /* 100VG-AnyLAN */ +#define IFM_100_T2 10 /* 100BaseT2 */ +#define IFM_1000_SX 11 /* 1000BaseSX - multi-mode fiber */ +#define IFM_10_STP 12 /* 10BaseT over shielded TP */ +#define IFM_10_FL 13 /* 10BaseFL - Fiber */ +#define IFM_1000_LX 14 /* 1000baseLX - single-mode fiber */ +#define IFM_1000_CX 15 /* 1000baseCX - 150ohm STP */ +#define IFM_1000_T 16 /* 1000baseT - 4 pair cat 5 */ +#define IFM_HPNA_1 17 /* HomePNA 1.0 (1Mb/s) */ +#define IFM_10G_LR 18 /* 10GBase-LR 1310nm Single-mode */ +#define IFM_10G_SR 19 /* 10GBase-SR 850nm Multi-mode */ +#define IFM_10G_CX4 20 /* 10GBase CX4 copper */ +#define IFM_2500_SX 21 /* 2500BaseSX - multi-mode fiber */ +#define IFM_10G_TWINAX 22 /* 10GBase Twinax copper */ +#define IFM_10G_TWINAX_LONG 23 /* 10GBase Twinax Long copper */ +#define IFM_10G_LRM 24 /* 10GBase-LRM 850nm Multi-mode */ +#define IFM_UNKNOWN 25 /* media types not defined yet */ +#define IFM_10G_T 26 /* 10GBase-T - RJ45 */ + + +/* note 31 is the max! */ + +#define IFM_ETH_MASTER 0x00000100 /* master mode (1000baseT) */ + +/* + * Token ring + */ +#define IFM_TOKEN 0x00000040 +#define IFM_TOK_STP4 3 /* Shielded twisted pair 4m - DB9 */ +#define IFM_TOK_STP16 4 /* Shielded twisted pair 16m - DB9 */ +#define IFM_TOK_UTP4 5 /* Unshielded twisted pair 4m - RJ45 */ +#define IFM_TOK_UTP16 6 /* Unshielded twisted pair 16m - RJ45 */ +#define IFM_TOK_STP100 7 /* Shielded twisted pair 100m - DB9 */ +#define IFM_TOK_UTP100 8 /* Unshielded twisted pair 100m - RJ45 */ +#define IFM_TOK_ETR 0x00000200 /* Early token release */ +#define IFM_TOK_SRCRT 0x00000400 /* Enable source routing features */ +#define IFM_TOK_ALLR 0x00000800 /* All routes / Single route bcast */ +#define IFM_TOK_DTR 0x00002000 /* Dedicated token ring */ +#define IFM_TOK_CLASSIC 0x00004000 /* Classic token ring */ +#define IFM_TOK_AUTO 0x00008000 /* Automatic Dedicate/Classic token ring */ + +/* + * FDDI + */ +#define IFM_FDDI 0x00000060 +#define IFM_FDDI_SMF 3 /* Single-mode fiber */ +#define IFM_FDDI_MMF 4 /* Multi-mode fiber */ +#define IFM_FDDI_UTP 5 /* CDDI / UTP */ +#define IFM_FDDI_DA 0x00000100 /* Dual attach / single attach */ + +/* + * IEEE 802.11 Wireless + */ +#define IFM_IEEE80211 0x00000080 +/* NB: 0,1,2 are auto, manual, none defined below */ +#define IFM_IEEE80211_FH1 3 /* Frequency Hopping 1Mbps */ +#define IFM_IEEE80211_FH2 4 /* Frequency Hopping 2Mbps */ +#define IFM_IEEE80211_DS1 5 /* Direct Sequence 1Mbps */ +#define IFM_IEEE80211_DS2 6 /* Direct Sequence 2Mbps */ +#define IFM_IEEE80211_DS5 7 /* Direct Sequence 5.5Mbps */ +#define IFM_IEEE80211_DS11 8 /* Direct Sequence 11Mbps */ +#define IFM_IEEE80211_DS22 9 /* Direct Sequence 22Mbps */ +#define IFM_IEEE80211_OFDM6 10 /* OFDM 6Mbps */ +#define IFM_IEEE80211_OFDM9 11 /* OFDM 9Mbps */ +#define IFM_IEEE80211_OFDM12 12 /* OFDM 12Mbps */ +#define IFM_IEEE80211_OFDM18 13 /* OFDM 18Mbps */ +#define IFM_IEEE80211_OFDM24 14 /* OFDM 24Mbps */ +#define IFM_IEEE80211_OFDM36 15 /* OFDM 36Mbps */ +#define IFM_IEEE80211_OFDM48 16 /* OFDM 48Mbps */ +#define IFM_IEEE80211_OFDM54 17 /* OFDM 54Mbps */ +#define IFM_IEEE80211_OFDM72 18 /* OFDM 72Mbps */ +#define IFM_IEEE80211_DS354k 19 /* Direct Sequence 354Kbps */ +#define IFM_IEEE80211_DS512k 20 /* Direct Sequence 512Kbps */ +#define IFM_IEEE80211_OFDM3 21 /* OFDM 3Mbps */ +#define IFM_IEEE80211_OFDM4 22 /* OFDM 4.5Mbps */ +#define IFM_IEEE80211_OFDM27 23 /* OFDM 27Mbps */ +/* NB: not enough bits to express MCS fully */ +#define IFM_IEEE80211_MCS 24 /* HT MCS rate */ + +#define IFM_IEEE80211_ADHOC 0x00000100 /* Operate in Adhoc mode */ +#define IFM_IEEE80211_HOSTAP 0x00000200 /* Operate in Host AP mode */ +#define IFM_IEEE80211_IBSS 0x00000400 /* Operate in IBSS mode */ +#define IFM_IEEE80211_WDS 0x00000800 /* Operate in WDS mode */ +#define IFM_IEEE80211_TURBO 0x00001000 /* Operate in turbo mode */ +#define IFM_IEEE80211_MONITOR 0x00002000 /* Operate in monitor mode */ +#define IFM_IEEE80211_MBSS 0x00004000 /* Operate in MBSS mode */ + +/* operating mode for multi-mode devices */ +#define IFM_IEEE80211_11A 0x00010000 /* 5Ghz, OFDM mode */ +#define IFM_IEEE80211_11B 0x00020000 /* Direct Sequence mode */ +#define IFM_IEEE80211_11G 0x00030000 /* 2Ghz, CCK mode */ +#define IFM_IEEE80211_FH 0x00040000 /* 2Ghz, GFSK mode */ +#define IFM_IEEE80211_11NA 0x00050000 /* 5Ghz, HT mode */ +#define IFM_IEEE80211_11NG 0x00060000 /* 2Ghz, HT mode */ + +/* + * ATM + */ +#define IFM_ATM 0x000000a0 +#define IFM_ATM_UNKNOWN 3 +#define IFM_ATM_UTP_25 4 +#define IFM_ATM_TAXI_100 5 +#define IFM_ATM_TAXI_140 6 +#define IFM_ATM_MM_155 7 +#define IFM_ATM_SM_155 8 +#define IFM_ATM_UTP_155 9 +#define IFM_ATM_MM_622 10 +#define IFM_ATM_SM_622 11 +#define IFM_ATM_VIRTUAL 12 +#define IFM_ATM_SDH 0x00000100 /* SDH instead of SONET */ +#define IFM_ATM_NOSCRAMB 0x00000200 /* no scrambling */ +#define IFM_ATM_UNASSIGNED 0x00000400 /* unassigned cells */ + +/* + * CARP Common Address Redundancy Protocol + */ +#define IFM_CARP 0x000000c0 + +/* + * Shared media sub-types + */ +#define IFM_AUTO 0 /* Autoselect best media */ +#define IFM_MANUAL 1 /* Jumper/dipswitch selects media */ +#define IFM_NONE 2 /* Deselect all media */ + +/* + * Shared options + */ +#define IFM_FDX 0x00100000 /* Force full duplex */ +#define IFM_HDX 0x00200000 /* Force half duplex */ +#define IFM_FLAG0 0x01000000 /* Driver defined flag */ +#define IFM_FLAG1 0x02000000 /* Driver defined flag */ +#define IFM_FLAG2 0x04000000 /* Driver defined flag */ +#define IFM_LOOP 0x08000000 /* Put hardware in loopback */ + +/* + * Masks + */ +#define IFM_NMASK 0x000000e0 /* Network type */ +#define IFM_TMASK 0x0000001f /* Media sub-type */ +#define IFM_IMASK 0xf0000000 /* Instance */ +#define IFM_ISHIFT 28 /* Instance shift */ +#define IFM_OMASK 0x0000ff00 /* Type specific options */ +#define IFM_MMASK 0x00070000 /* Mode */ +#define IFM_MSHIFT 16 /* Mode shift */ +#define IFM_GMASK 0x0ff00000 /* Global options */ + +/* + * Status bits + */ +#define IFM_AVALID 0x00000001 /* Active bit valid */ +#define IFM_ACTIVE 0x00000002 /* Interface attached to working net */ + +/* Mask of "status valid" bits, for ifconfig(8). */ +#define IFM_STATUS_VALID IFM_AVALID + +/* List of "status valid" bits, for ifconfig(8). */ +#define IFM_STATUS_VALID_LIST { \ + IFM_AVALID, \ + 0 \ + } + +/* + * Macros to extract various bits of information from the media word. + */ +#define IFM_TYPE(x) ((x) & IFM_NMASK) +#define IFM_SUBTYPE(x) ((x) & IFM_TMASK) +#define IFM_TYPE_OPTIONS(x) ((x) & IFM_OMASK) +#define IFM_INST(x) (((x) & IFM_IMASK) >> IFM_ISHIFT) +#define IFM_OPTIONS(x) ((x) & (IFM_OMASK|IFM_GMASK)) +#define IFM_MODE(x) ((x) & IFM_MMASK) + +#define IFM_INST_MAX IFM_INST(IFM_IMASK) + +/* + * Macro to create a media word. + */ +#define IFM_MAKEWORD(type, subtype, options, instance) \ + ((type) | (subtype) | (options) | ((instance) << IFM_ISHIFT)) +#define IFM_MAKEMODE(mode) \ + (((mode) << IFM_MSHIFT) & IFM_MMASK) + + +#endif /* _NET_IF_MEDIA_H_ */ diff --git a/Drivers/Net/MarvellYukonDxe/if_msk.c b/Drivers/Net/MarvellYukonDxe/if_msk.c new file mode 100644 index 0000000..f9feaaf --- /dev/null +++ b/Drivers/Net/MarvellYukonDxe/if_msk.c @@ -0,0 +1,2982 @@ +/** <at> file +* Support for PCIe Marvell Yukon gigabit ethernet adapter product family +* +* Copyright (c) 2011-2016, ARM Limited. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +/****************************************************************************** + * + * LICENSE: + * Copyright (C) Marvell International Ltd. and/or its affiliates + * + * The computer program files contained in this folder ("Files") + * are provided to you under the BSD-type license terms provided + * below, and any use of such Files and any derivative works + * thereof created by you shall be governed by the following terms + * and conditions: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * - Neither the name of Marvell nor the names of its contributors + * may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + * /LICENSE + * + *****************************************************************************/ + +/*- + * Copyright (c) 1997, 1998, 1999, 2000 + * Bill Paul <wpaul <at> ctr.columbia.edu>. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + */ +/*- + * Copyright (c) 2003 Nathan L. Binkert <binkertn <at> umich.edu> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/* + * Device driver for the Marvell Yukon II Ethernet controller. + * Due to lack of documentation, this driver is based on the code from + * sk (4) and Marvell's myk (4) driver for FreeBSD 5.x. + */ + +#include <Base.h> +#include <Library/IoLib.h> +#include <Library/MemoryAllocationLib.h> +#include <Library/BaseMemoryLib.h> +#include <Library/DebugLib.h> +#include <Library/NetLib.h> +#include <Library/PcdLib.h> +#include <Library/BaseLib.h> +#include <Library/TimerLib.h> +#include <Library/UefiBootServicesTableLib.h> +#include <Protocol/PciIo.h> +#include <IndustryStandard/Pci.h> +#include <IndustryStandard/Acpi.h> +#include "miivar.h" +#include "if_media.h" +#include "if_mskreg.h" +#include "if_msk.h" + +// +// Global Variables +// +static EFI_PCI_IO_PROTOCOL *mPciIo; +static struct msk_softc *mSoftc; + +#define MSK_CSUM_FEATURES (CSUM_TCP | CSUM_UDP) + +/* + * Devices supported by this driver. + */ +static struct msk_product { + UINT16 msk_vendorid; + UINT16 msk_deviceid; + const CHAR8 *msk_name; +} msk_products[] = { +{ VENDORID_SK, DEVICEID_SK_YUKON2, "SK-9Sxx Gigabit Ethernet" }, +{ VENDORID_SK, DEVICEID_SK_YUKON2_EXPR, "SK-9Exx Gigabit Ethernet"}, +{ VENDORID_MARVELL, DEVICEID_MRVL_8021CU, "Marvell Yukon 88E8021CU Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8021X, "Marvell Yukon 88E8021 SX/LX Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8022CU, "Marvell Yukon 88E8022CU Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8022X, "Marvell Yukon 88E8022 SX/LX Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8061CU, "Marvell Yukon 88E8061CU Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8061X, "Marvell Yukon 88E8061 SX/LX Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8062CU, "Marvell Yukon 88E8062CU Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8062X, "Marvell Yukon 88E8062 SX/LX Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8035, "Marvell Yukon 88E8035 Fast Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8036, "Marvell Yukon 88E8036 Fast Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8038, "Marvell Yukon 88E8038 Fast Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8039, "Marvell Yukon 88E8039 Fast Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8040, "Marvell Yukon 88E8040 Fast Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8040T, "Marvell Yukon 88E8040T Fast Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8042, "Marvell Yukon 88E8042 Fast Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_8048, "Marvell Yukon 88E8048 Fast Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_4361, "Marvell Yukon 88E8050 Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_4360, "Marvell Yukon 88E8052 Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_4362, "Marvell Yukon 88E8053 Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_4363, "Marvell Yukon 88E8055 Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_4364, "Marvell Yukon 88E8056 Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_4365, "Marvell Yukon 88E8070 Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_436A, "Marvell Yukon 88E8058 Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_436B, "Marvell Yukon 88E8071 Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_436C, "Marvell Yukon 88E8072 Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_4380, "Marvell Yukon 88E8057 Gigabit Ethernet" }, +{ VENDORID_MARVELL, DEVICEID_MRVL_4381, "Marvell Yukon 88E8059 Gigabit Ethernet" }, +{ VENDORID_DLINK, DEVICEID_DLINK_DGE550SX, "D-Link 550SX Gigabit Ethernet" }, +{ VENDORID_DLINK, DEVICEID_DLINK_DGE560SX, "D-Link 560SX Gigabit Ethernet" }, +{ VENDORID_DLINK, DEVICEID_DLINK_DGE560T, "D-Link 560T Gigabit Ethernet" } +}; + +static const CHAR8 *model_name[] = { + "Yukon XL", + "Yukon EC Ultra", + "Yukon EX", + "Yukon EC", + "Yukon FE", + "Yukon FE+", + "Yukon Supreme", + "Yukon Ultra 2", + "Yukon Unknown", + "Yukon Optima", +}; + +// +// Forward declarations +// +static VOID mskc_setup_rambuffer (VOID); +static VOID mskc_reset (VOID); + +static EFI_STATUS msk_attach (INT32); +static VOID msk_detach (INT32); + +static VOID mskc_tick (IN EFI_EVENT, IN VOID*); +static VOID msk_intr (VOID); +static VOID msk_intr_phy (struct msk_if_softc *); +static VOID msk_intr_gmac (struct msk_if_softc *); +static __inline VOID msk_rxput (struct msk_if_softc *); +static INTN msk_handle_events (VOID); +static VOID msk_handle_hwerr (struct msk_if_softc *, UINT32); +static VOID msk_intr_hwerr (VOID); +static VOID msk_rxeof (struct msk_if_softc *, UINT32, UINT32, INTN); +static VOID msk_txeof (struct msk_if_softc *, INTN); +static EFI_STATUS msk_encap (struct msk_if_softc *, MSK_SYSTEM_BUF *); +static VOID msk_start (INT32); +static VOID msk_set_prefetch (INTN, EFI_PHYSICAL_ADDRESS, UINT32); +static VOID msk_set_rambuffer (struct msk_if_softc *); +static VOID msk_set_tx_stfwd (struct msk_if_softc *); +static EFI_STATUS msk_init (struct msk_if_softc *); +static VOID msk_stop (struct msk_if_softc *); +static VOID msk_phy_power (struct msk_softc *, INTN); +static EFI_STATUS msk_status_dma_alloc (VOID); +static VOID msk_status_dma_free (VOID); +static EFI_STATUS msk_txrx_dma_alloc (struct msk_if_softc *); +static VOID msk_txrx_dma_free (struct msk_if_softc *); +static EFI_STATUS msk_init_rx_ring (struct msk_if_softc *); +static VOID msk_init_tx_ring (struct msk_if_softc *); +static __inline VOID msk_discard_rxbuf (struct msk_if_softc *, INTN); +static EFI_STATUS msk_newbuf (struct msk_if_softc *, INTN); + +static VOID msk_rxfilter ( + struct msk_if_softc *sc_if, + UINT32 FilterFlags, + UINTN MCastFilterCnt, + EFI_MAC_ADDRESS *MCastFilter + ); +static VOID msk_setvlan (struct msk_if_softc *); + +static VOID msk_stats_clear (struct msk_if_softc *); +static VOID msk_stats_update (struct msk_if_softc *); + +// +// Functions +// + +INTN +msk_phy_readreg ( + INTN port, + INTN reg + ) +{ + INTN i; + INTN val; + + GMAC_WRITE_2 (mSoftc, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD); + + for (i = 0; i < MSK_TIMEOUT; i++) { + MicroSecondDelay (1); + val = GMAC_READ_2 (mSoftc, port, GM_SMI_CTRL); + if ((val & GM_SMI_CT_RD_VAL) != 0) { + val = GMAC_READ_2 (mSoftc, port, GM_SMI_DATA); + break; + } + } + + if (i == MSK_TIMEOUT) { + DEBUG ((EFI_D_NET, "Marvell Yukon: phy failed to come ready\n")); + val = 0; + } + + return (val); +} + +INTN +msk_phy_writereg ( + INTN port, + INTN reg, + INTN val + ) +{ + INTN i; + + GMAC_WRITE_2 (mSoftc, port, GM_SMI_DATA, val); + GMAC_WRITE_2 (mSoftc, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg)); + for (i = 0; i < MSK_TIMEOUT; i++) { + MicroSecondDelay (1); + if ((GMAC_READ_2 (mSoftc, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY) == 0) { + break; + } + } + if (i == MSK_TIMEOUT) { + DEBUG ((EFI_D_NET, "Marvell Yukon: phy write timeout\n")); + } + + return (0); +} + +VOID +msk_miibus_statchg ( + INTN port + ) +{ + struct msk_if_softc *sc_if = mSoftc->msk_if[port]; + struct mii_data *mii = &sc_if->mii_d; + UINT32 gmac; + + sc_if->msk_flags &= ~MSK_FLAG_LINK; + + if ((mii->mii_media_status & (IFM_AVALID | IFM_ACTIVE)) == (IFM_AVALID | IFM_ACTIVE)) { + + DEBUG ((EFI_D_NET, "Marvell Yukon: msk_miibus_statchg, phy is active\n")); + switch (IFM_SUBTYPE (mii->mii_media_active)) { + case IFM_10_T: + case IFM_100_TX: + sc_if->msk_flags |= MSK_FLAG_LINK; + break; + case IFM_1000_T: + case IFM_1000_SX: + case IFM_1000_LX: + case IFM_1000_CX: + if ((sc_if->msk_flags & MSK_FLAG_FASTETHER) == 0) { + sc_if->msk_flags |= MSK_FLAG_LINK; + } + break; + default: + break; + } + } + + if ((sc_if->msk_flags & MSK_FLAG_LINK) != 0) { + // Enable Tx FIFO Underrun + DEBUG ((EFI_D_NET, "Marvell Yukon: msk_miibus_statchg, link up\n")); + + CSR_WRITE_1 (mSoftc, MR_ADDR (port, GMAC_IRQ_MSK), GM_IS_TX_FF_UR | GM_IS_RX_FF_OR); + // + // Because mii(4) notify msk (4) that it detected link status + // change, there is no need to enable automatic + // speed/flow-control/duplex updates. + // + gmac = GM_GPCR_AU_ALL_DIS; + switch (IFM_SUBTYPE (mii->mii_media_active)) { + case IFM_1000_SX: + case IFM_1000_T: + gmac |= GM_GPCR_SPEED_1000; + break; + case IFM_100_TX: + gmac |= GM_GPCR_SPEED_100; + break; + case IFM_10_T: + break; + } + + // Disable Rx flow control + if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FLAG0) == 0) { + gmac |= GM_GPCR_FC_RX_DIS; + } + // Disable Tx flow control + if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FLAG1) == 0) { + gmac |= GM_GPCR_FC_TX_DIS; + } + if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FDX) != 0) { + gmac |= GM_GPCR_DUP_FULL; + } else { + gmac |= GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS; + } + gmac |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; + GMAC_WRITE_2 (mSoftc, port, GM_GP_CTRL, gmac); + // Read again to ensure writing + GMAC_READ_2 (mSoftc, port, GM_GP_CTRL); + gmac = GMC_PAUSE_OFF; + if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FDX) != 0) { + if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FLAG0) != 0) { + gmac = GMC_PAUSE_ON; + } + } + CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), gmac); + + // Enable PHY interrupt for FIFO underrun/overflow + msk_phy_writereg (port, PHY_MARV_INT_MASK, PHY_M_IS_FIFO_ERROR); + } else { + // + // Link state changed to down. + // Disable PHY interrupts. + // + DEBUG ((EFI_D_NET, "Marvell Yukon: msk_miibus_statchg, link down\n")); + msk_phy_writereg (port, PHY_MARV_INT_MASK, 0); + // Disable Rx/Tx MAC + gmac = GMAC_READ_2 (mSoftc, port, GM_GP_CTRL); + if ((GM_GPCR_RX_ENA | GM_GPCR_TX_ENA) != 0) { + gmac &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); + GMAC_WRITE_2 (mSoftc, port, GM_GP_CTRL, gmac); + // Read again to ensure writing + GMAC_READ_2 (mSoftc, port, GM_GP_CTRL); + } + } +} + +UINT32 +ether_crc32_be ( + const UINT8 *buf, + UINTN len + ) +{ + UINTN i; + UINT32 crc; + UINT32 carry; + INTN bit; + UINT8 data; + + crc = 0xffffffff; // initial value + + for (i = 0; i < len; i++) { + for (data = *buf++, bit = 0; bit < 8; bit++, data >>= 1) { + carry = ((crc & 0x80000000) ? 1 : 0) ^ (data & 0x01); + crc <<= 1; + if (carry) { + crc = (crc ^ ETHER_CRC_POLY_BE) | carry; + } + } + } + + return crc; +} + +VOID +mskc_rxfilter ( + UINT32 FilterFlags, + UINTN MCastFilterCnt, + EFI_MAC_ADDRESS *MCastFilter + ) +{ + msk_rxfilter (mSoftc->msk_if[MSK_PORT_A], FilterFlags, MCastFilterCnt, MCastFilter); +} + +static VOID +msk_rxfilter ( + struct msk_if_softc *sc_if, + UINT32 FilterFlags, + UINTN MCastFilterCnt, + EFI_MAC_ADDRESS *MCastFilter + ) +{ + UINT32 mchash[2]; + UINT32 crc; + UINT16 mode; + INTN port = sc_if->msk_md.port; + + ZeroMem (mchash, sizeof (mchash)); + mode = GMAC_READ_2 (mSoftc, port, GM_RX_CTRL); + // if ((ifp->if_flags & IFF_PROMISC) != 0) + if ((FilterFlags & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS) != 0) { + mode &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); + } + // else if ((ifp->if_flags & IFF_ALLMULTI) != 0) { + else if ((FilterFlags & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST) != 0) { + mode |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA; + mchash[0] = 0xffff; + mchash[1] = 0xffff; + } else { + mode |= GM_RXCR_UCF_ENA; + while (MCastFilterCnt-- > 0) { + // if (ifma->ifma_addr->sa_family != AF_LINK) + // continue; + // crc = ether_crc32_be (LLADDR ((struct sockaddr_dl *) + // ifma->ifma_addr), ETHER_ADDR_LEN); + crc = ether_crc32_be (MCastFilter[MCastFilterCnt].Addr, NET_ETHER_ADDR_LEN); + /* Just want the 6 least significant bits. */ + crc &= 0x3f; + /* Set the corresponding bit in the hash table. */ + mchash[crc >> 5] |= 1 << (crc & 0x1f); + } + if (mchash[0] != 0 || mchash[1] != 0) { + mode |= GM_RXCR_MCF_ENA; + } + } + + GMAC_WRITE_2 (mSoftc, port, GM_MC_ADDR_H1, mchash[0] & 0xffff ); + GMAC_WRITE_2 (mSoftc, port, GM_MC_ADDR_H2, (mchash[0] >> 16) & 0xffff ); + GMAC_WRITE_2 (mSoftc, port, GM_MC_ADDR_H3, mchash[1] & 0xffff ); + GMAC_WRITE_2 (mSoftc, port, GM_MC_ADDR_H4, (mchash[1] >> 16) & 0xffff ); + GMAC_WRITE_2 (mSoftc, port, GM_RX_CTRL, mode ); +} + +static +VOID +msk_setvlan ( + struct msk_if_softc *sc_if + ) +{ + // + // Disable automatic VLAN tagging/stripping + // + CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF); + CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF); +} + +static +EFI_STATUS +msk_init_rx_ring ( + struct msk_if_softc *sc_if + ) +{ + struct msk_ring_data *rd; + struct msk_rxdesc *rxd; + INTN i; + INTN prod; + EFI_STATUS Status; + + sc_if->msk_cdata.msk_rx_cons = 0; + sc_if->msk_cdata.msk_rx_prod = 0; + sc_if->msk_cdata.msk_rx_putwm = MSK_PUT_WM; + + rd = &sc_if->msk_rdata; + ZeroMem (rd->msk_rx_ring, MSK_RX_RING_SZ); + prod = sc_if->msk_cdata.msk_rx_prod; + for (i = 0; i < MSK_RX_RING_CNT; i++) { + rxd = &sc_if->msk_cdata.msk_rxdesc[prod]; + ZeroMem (&rxd->rx_m, sizeof (MSK_DMA_BUF)); + rxd->rx_le = &rd->msk_rx_ring[prod]; + Status = msk_newbuf (sc_if, prod); + if (EFI_ERROR (Status)) { + return Status; + } + MSK_INC (prod, MSK_RX_RING_CNT); + } + + // Update prefetch unit. + sc_if->msk_cdata.msk_rx_prod = MSK_RX_RING_CNT - 1; + CSR_WRITE_2 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_rx_prod); + + return EFI_SUCCESS; +} + +STATIC +VOID +msk_init_tx_ring ( + struct msk_if_softc *sc_if + ) +{ + struct msk_ring_data *rd; + struct msk_txdesc *txd; + INTN i; + + sc_if->msk_cdata.msk_tx_prod = 0; + sc_if->msk_cdata.msk_tx_cons = 0; + sc_if->msk_cdata.msk_tx_cnt = 0; + + rd = &sc_if->msk_rdata; + ZeroMem (rd->msk_tx_ring, sizeof (struct msk_tx_desc) * MSK_TX_RING_CNT); + for (i = 0; i < MSK_TX_RING_CNT; i++) { + txd = &sc_if->msk_cdata.msk_txdesc[i]; + ZeroMem (&(txd->tx_m), sizeof (MSK_DMA_BUF)); + txd->tx_le = &rd->msk_tx_ring[i]; + } +} + +static +__inline +VOID +msk_discard_rxbuf ( + struct msk_if_softc *sc_if, + INTN idx + ) +{ + struct msk_rx_desc *rx_le; + struct msk_rxdesc *rxd; + MSK_DMA_BUF *DmaBuffer; + + DEBUG ((EFI_D_NET, "Marvell Yukon: discard rxbuf\n")); + + rxd = &sc_if->msk_cdata.msk_rxdesc[idx]; + DmaBuffer = &rxd->rx_m; + rx_le = rxd->rx_le; + rx_le->msk_control = htole32 (DmaBuffer->Length | OP_PACKET | HW_OWNER); +} + +static +EFI_STATUS +msk_newbuf ( + IN struct msk_if_softc *sc_if, + IN INTN idx + ) +{ + struct msk_rx_desc *rx_le; + struct msk_rxdesc *rxd; + UINTN Length; + VOID *Buffer; + VOID *Mapping; + EFI_PHYSICAL_ADDRESS PhysAddr; + EFI_STATUS Status; + + Length = MAX_SUPPORTED_PACKET_SIZE; + + rxd = &sc_if->msk_cdata.msk_rxdesc[idx]; + + if ((rxd->rx_m.Buf != NULL) && (rxd->rx_m.Length >= Length)) { + return EFI_ALREADY_STARTED; + } else if (rxd->rx_m.Buf != NULL) { + mPciIo->Unmap (mPciIo, rxd->rx_m.DmaMapping); + mPciIo->FreeBuffer (mPciIo, EFI_SIZE_TO_PAGES (rxd->rx_m.Length), rxd->rx_m.Buf); + } + + Status = mPciIo->AllocateBuffer (mPciIo, AllocateAnyPages, EfiBootServicesData, EFI_SIZE_TO_PAGES (Length), &Buffer, 0); + if (EFI_ERROR (Status)) { + return Status; + } + + Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterWrite, Buffer, &Length, &PhysAddr, &Mapping); + if (EFI_ERROR (Status)) { + Length = MAX_SUPPORTED_PACKET_SIZE; + mPciIo->FreeBuffer (mPciIo, EFI_SIZE_TO_PAGES (Length), Buffer); + return Status; + } + + ZeroMem (&(rxd->rx_m), sizeof (MSK_DMA_BUF)); + rxd->rx_m.DmaMapping = Mapping; + rxd->rx_m.Buf = Buffer; + rxd->rx_m.Length = Length; + rx_le = rxd->rx_le; + rx_le->msk_addr = htole32 (MSK_ADDR_LO (PhysAddr)); + rx_le->msk_control = htole32 (Length | OP_PACKET | HW_OWNER); + + return EFI_SUCCESS; +} + +EFI_STATUS +mskc_probe ( + EFI_PCI_IO_PROTOCOL *PciIo + ) +{ + struct msk_product *mp; + UINT16 vendor; + UINT16 devid; + UINT32 PciID; + INTN i; + EFI_STATUS Status; + + Status = PciIo->Pci.Read ( + PciIo, + EfiPciIoWidthUint32, + PCI_VENDOR_ID_OFFSET, + 1, + &PciID + ); + if (EFI_ERROR (Status)) { + return EFI_UNSUPPORTED; + } + + vendor = PciID & 0xFFFF; + devid = PciID >> 16; + mp = msk_products; + for (i = 0; i < sizeof (msk_products)/sizeof (msk_products[0]); i++, mp++) { + if (vendor == mp->msk_vendorid && devid == mp->msk_deviceid) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Probe found device %a\n", mp->msk_name)); + return EFI_SUCCESS; + } + } + return EFI_UNSUPPORTED; +} + +static +VOID +mskc_setup_rambuffer ( + VOID + ) +{ + INTN next; + INTN i; + + /* Get adapter SRAM size. */ + mSoftc->msk_ramsize = CSR_READ_1 (mSoftc, B2_E_0) * 4; + DEBUG ((EFI_D_NET, "Marvell Yukon: RAM buffer size : %dKB\n", mSoftc->msk_ramsize)); + if (mSoftc->msk_ramsize == 0) { + return; + } + + mSoftc->msk_pflags |= MSK_FLAG_RAMBUF; + /* + * Give receiver 2/3 of memory and round down to the multiple + * of 1024. Tx/Rx RAM buffer size of Yukon II shoud be multiple + * of 1024. + */ + mSoftc->msk_rxqsize = (((mSoftc->msk_ramsize * 1024 * 2) / 3) / 1024) * 1024; + mSoftc->msk_txqsize = (mSoftc->msk_ramsize * 1024) - mSoftc->msk_rxqsize; + for (i = 0, next = 0; i < mSoftc->msk_num_port; i++) { + mSoftc->msk_rxqstart[i] = next; + mSoftc->msk_rxqend[i] = next + mSoftc->msk_rxqsize - 1; + next = mSoftc->msk_rxqend[i] + 1; + mSoftc->msk_txqstart[i] = next; + mSoftc->msk_txqend[i] = next + mSoftc->msk_txqsize - 1; + next = mSoftc->msk_txqend[i] + 1; + DEBUG ((EFI_D_NET, "Marvell Yukon: Port %d : Rx Queue %dKB(0x%08x:0x%08x)\n", i, + mSoftc->msk_rxqsize / 1024, mSoftc->msk_rxqstart[i], mSoftc->msk_rxqend[i])); + DEBUG ((EFI_D_NET, "Marvell Yukon: Port %d : Tx Queue %dKB(0x%08x:0x%08x)\n", i, + mSoftc->msk_txqsize / 1024, mSoftc->msk_txqstart[i], mSoftc->msk_txqend[i])); + } +} + +static +VOID +msk_phy_power ( + struct msk_softc *sc, + INTN mode + ) +{ + UINT32 our; + UINT32 val; + INTN i; + + switch (mode) { + case MSK_PHY_POWERUP: + // Switch power to VCC (WA for VAUX problem) + CSR_WRITE_1 (sc, B0_POWER_CTRL, PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); + + // Disable Core Clock Division, set Clock Select to 0 + CSR_WRITE_4 (sc, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS); + + val = 0; + if (sc->msk_hw_id == CHIP_ID_YUKON_XL && sc->msk_hw_rev > CHIP_REV_YU_XL_A1) { + // Enable bits are inverted + val = Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | + Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | + Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS; + } + // + // Enable PCI & Core Clock, enable clock gating for both Links. + // + CSR_WRITE_1 (sc, B2_Y2_CLK_GATE, val); + + val = CSR_PCI_READ_4 (sc, PCI_OUR_REG_1); + val &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); + if (sc->msk_hw_id == CHIP_ID_YUKON_XL) { + if (sc->msk_hw_rev > CHIP_REV_YU_XL_A1) { + // Deassert Low Power for 1st PHY + val |= PCI_Y2_PHY1_COMA; + if (sc->msk_num_port > 1) { + val |= PCI_Y2_PHY2_COMA; + } + } + } + // Release PHY from PowerDown/COMA mode + CSR_PCI_WRITE_4 (sc, PCI_OUR_REG_1, val); + + switch (sc->msk_hw_id) { + case CHIP_ID_YUKON_EC_U: + case CHIP_ID_YUKON_EX: + case CHIP_ID_YUKON_FE_P: + case CHIP_ID_YUKON_UL_2: + case CHIP_ID_YUKON_OPT: + CSR_WRITE_2 (sc, B0_CTST, Y2_HW_WOL_OFF); + + // Enable all clocks + CSR_PCI_WRITE_4 (sc, PCI_OUR_REG_3, 0); + our = CSR_PCI_READ_4 (sc, PCI_OUR_REG_4); + our &= (PCI_FORCE_ASPM_REQUEST | PCI_ASPM_GPHY_LINK_DOWN | PCI_ASPM_INT_FIFO_EMPTY | PCI_ASPM_CLKRUN_REQUEST); + // Set all bits to 0 except bits 15..12 + CSR_PCI_WRITE_4 (sc, PCI_OUR_REG_4, our); + our = CSR_PCI_READ_4 (sc, PCI_OUR_REG_5); + our &= PCI_CTL_TIM_VMAIN_AV_MSK; + CSR_PCI_WRITE_4 (sc, PCI_OUR_REG_5, our); + CSR_PCI_WRITE_4 (sc, PCI_CFG_REG_1, 0); + // + // Disable status race, workaround for + // Yukon EC Ultra & Yukon EX. + // + val = CSR_READ_4 (sc, B2_GP_IO); + val |= GLB_GPIO_STAT_RACE_DIS; + CSR_WRITE_4 (sc, B2_GP_IO, val); + CSR_READ_4 (sc, B2_GP_IO); + break; + default: + break; + } + for (i = 0; i < sc->msk_num_port; i++) { + CSR_WRITE_2 (sc, MR_ADDR (i, GMAC_LINK_CTRL), GMLC_RST_SET); + CSR_WRITE_2 (sc, MR_ADDR (i, GMAC_LINK_CTRL), GMLC_RST_CLR); + } + break; + case MSK_PHY_POWERDOWN: + val = CSR_PCI_READ_4 (sc, PCI_OUR_REG_1); + val |= PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD; + if (sc->msk_hw_id == CHIP_ID_YUKON_XL && sc->msk_hw_rev > CHIP_REV_YU_XL_A1) { + val &= ~PCI_Y2_PHY1_COMA; + if (sc->msk_num_port > 1) { + val &= ~PCI_Y2_PHY2_COMA; + } + } + CSR_PCI_WRITE_4 (sc, PCI_OUR_REG_1, val); + + val = Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | + Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | + Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS; + if (sc->msk_hw_id == CHIP_ID_YUKON_XL && sc->msk_hw_rev > CHIP_REV_YU_XL_A1) { + // Enable bits are inverted + val = 0; + } + // + // Disable PCI & Core Clock, disable clock gating for + // both Links. + // + CSR_WRITE_1 (sc, B2_Y2_CLK_GATE, val); + CSR_WRITE_1 (sc, B0_POWER_CTRL, PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF); + break; + default: + break; + } +} + +static +VOID +clear_pci_errors ( + VOID + ) +{ + EFI_STATUS Status; + UINT16 val; + + // Clear all error bits in the PCI status register. + Status = mPciIo->Pci.Read ( + mPciIo, + EfiPciIoWidthUint16, + PCI_PRIMARY_STATUS_OFFSET, + 1, + &val + ); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Warning - Reading PCI Status failed: %r", Status)); + } + CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_ON); + val |= PCIM_STATUS_PERR | PCIM_STATUS_SERR | PCIM_STATUS_RMABORT | + PCIM_STATUS_RTABORT | PCIM_STATUS_PERRREPORT; + Status = mPciIo->Pci.Write ( + mPciIo, + EfiPciIoWidthUint16, + PCI_PRIMARY_STATUS_OFFSET, + 1, + &val + ); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Warning - Writing PCI Status failed: %r", Status)); + } + CSR_WRITE_2 (mSoftc, B0_CTST, CS_MRST_CLR); +} + +static +VOID +mskc_reset ( + VOID + ) +{ + EFI_STATUS Status; + EFI_PHYSICAL_ADDRESS PhysAddr; + UINT16 status; + UINT32 val; + INTN i; + + CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_CLR); + + // Disable ASF + if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) { + status = CSR_READ_2 (mSoftc, B28_Y2_ASF_HCU_CCSR); + // Clear AHB bridge & microcontroller reset + status &= ~(Y2_ASF_HCU_CCSR_AHB_RST | Y2_ASF_HCU_CCSR_CPU_RST_MODE); + // Clear ASF microcontroller state + status &= ~ Y2_ASF_HCU_CCSR_UC_STATE_MSK; + CSR_WRITE_2 (mSoftc, B28_Y2_ASF_HCU_CCSR, status); + } else { + CSR_WRITE_1 (mSoftc, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET); + } + CSR_WRITE_2 (mSoftc, B0_CTST, Y2_ASF_DISABLE); + + // + // Since we disabled ASF, S/W reset is required for Power Management. + // + CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_SET); + CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_CLR); + + clear_pci_errors (); + switch (mSoftc->msk_bustype) { + case MSK_PEX_BUS: + // Clear all PEX errors + CSR_PCI_WRITE_4 (mSoftc, PEX_UNC_ERR_STAT, 0xffffffff); + val = CSR_PCI_READ_4 (mSoftc, PEX_UNC_ERR_STAT); + if ((val & PEX_RX_OV) != 0) { + mSoftc->msk_intrmask &= ~Y2_IS_HW_ERR; + mSoftc->msk_intrhwemask &= ~Y2_IS_PCI_EXP; + } + break; + case MSK_PCI_BUS: + case MSK_PCIX_BUS: + // Set Cache Line Size to 2 (8bytes) if configured to 0 + Status = mPciIo->Pci.Read ( + mPciIo, + EfiPciIoWidthUint8, + PCI_CACHELINE_SIZE_OFFSET, + 1, + &val + ); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Warning - Reading PCI cache line size failed: %r", Status)); + } + if (val == 0) { + val = 2; + Status = mPciIo->Pci.Write ( + mPciIo, + EfiPciIoWidthUint8, + PCI_CACHELINE_SIZE_OFFSET, + 1, + &val + ); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Warning - Writing PCI cache line size failed: %r", Status)); + } + } + if (mSoftc->msk_bustype == MSK_PCIX_BUS) { + Status = mPciIo->Pci.Read ( + mPciIo, + EfiPciIoWidthUint32, + PCI_OUR_REG_1, + 1, + &val + ); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Warning - Reading Our Reg 1 failed: %r", Status)); + } + val |= PCI_CLS_OPT; + Status = mPciIo->Pci.Write ( + mPciIo, + EfiPciIoWidthUint32, + PCI_OUR_REG_1, + 1, + &val + ); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Warning - Writing Our Reg 1 failed: %r", Status)); + } + } + break; + } + + // Set PHY power state + msk_phy_power (mSoftc, MSK_PHY_POWERUP); + + // Reset GPHY/GMAC Control + for (i = 0; i < mSoftc->msk_num_port; i++) { + // GPHY Control reset + CSR_WRITE_4 (mSoftc, MR_ADDR (i, GPHY_CTRL), GPC_RST_SET); + CSR_WRITE_4 (mSoftc, MR_ADDR (i, GPHY_CTRL), GPC_RST_CLR); + if (mSoftc->msk_hw_id == CHIP_ID_YUKON_UL_2) { + // Magic value observed under Linux. + CSR_WRITE_4 (mSoftc, MR_ADDR (i, GPHY_CTRL), 0x00105226); + } + // GMAC Control reset + CSR_WRITE_4 (mSoftc, MR_ADDR (i, GMAC_CTRL), GMC_RST_SET); + CSR_WRITE_4 (mSoftc, MR_ADDR (i, GMAC_CTRL), GMC_RST_CLR); + CSR_WRITE_4 (mSoftc, MR_ADDR (i, GMAC_CTRL), GMC_F_LOOPB_OFF); + if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) { + CSR_WRITE_4 (mSoftc, MR_ADDR (i, GMAC_CTRL), GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | GMC_BYP_RETR_ON); + } + } + if ((mSoftc->msk_hw_id == CHIP_ID_YUKON_OPT) && (mSoftc->msk_hw_rev == 0)) { + // Disable PCIe PHY powerdown (reg 0x80, bit7) + CSR_WRITE_4 (mSoftc, Y2_PEX_PHY_DATA, (0x0080 << 16) | 0x0080); + } + CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + + // LED On + CSR_WRITE_2 (mSoftc, B0_CTST, Y2_LED_STAT_ON); + + // Enable plug in go + CSR_WRITE_2 (mSoftc, B0_CTST, Y_ULTRA_2_PLUG_IN_GO_EN); + + // Clear TWSI IRQ + CSR_WRITE_4 (mSoftc, B2_I2C_IRQ, I2C_CLR_IRQ); + + // Turn off hardware timer + CSR_WRITE_1 (mSoftc, B2_TI_CTRL, TIM_STOP); + CSR_WRITE_1 (mSoftc, B2_TI_CTRL, TIM_CLR_IRQ); + + // Turn off descriptor polling + CSR_WRITE_1 (mSoftc, B28_DPT_CTRL, DPT_STOP); + + // Turn off time stamps + CSR_WRITE_1 (mSoftc, GMAC_TI_ST_CTRL, GMT_ST_STOP); + CSR_WRITE_1 (mSoftc, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); + + // Configure timeout values + for (i = 0; i < mSoftc->msk_num_port; i++) { + CSR_WRITE_2 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_CTRL), RI_RST_SET); + CSR_WRITE_2 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_CTRL), RI_RST_CLR); + CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_R1), MSK_RI_TO_53); + CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XA1), MSK_RI_TO_53); + CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XS1), MSK_RI_TO_53); + CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_R1), MSK_RI_TO_53); + CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XA1), MSK_RI_TO_53); + CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XS1), MSK_RI_TO_53); + CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_R2), MSK_RI_TO_53); + CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XA2), MSK_RI_TO_53); + CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XS2), MSK_RI_TO_53); + CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_R2), MSK_RI_TO_53); + CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XA2), MSK_RI_TO_53); + CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XS2), MSK_RI_TO_53); + } + + // Disable all interrupts + CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, 0); + CSR_READ_4 (mSoftc, B0_HWE_IMSK); + CSR_WRITE_4 (mSoftc, B0_IMSK, 0); + CSR_READ_4 (mSoftc, B0_IMSK); + + /* + * On dual port PCI-X card, there is an problem where status + * can be received out of order due to split transactions. + */ + /* if (mSoftc->msk_pcixcap != 0 && mSoftc->msk_num_port > 1) { +// uint16_t pcix_cmd; + UINT16 pcix_cmd; + + pcix_cmd = pci_read_config (mSoftc->msk_dev, + mSoftc->msk_pcixcap + PCIXR_COMMAND, 2);*/ + /* Clear Max Outstanding Split Transactions. */ + /* pcix_cmd &= ~PCIXM_COMMAND_MAX_SPLITS; + CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_ON); + pci_write_config (mSoftc->msk_dev, + mSoftc->msk_pcixcap + PCIXR_COMMAND, pcix_cmd, 2); + CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + }*/ + /* if (mSoftc->msk_expcap != 0) {*/ + /* Change Max. Read Request Size to 2048 bytes. */ + /* if (pci_get_max_read_req(mSoftc->msk_dev) == 512) + pci_set_max_read_req(mSoftc->msk_dev, 2048); + } +*/ + // Clear status list + ZeroMem (mSoftc->msk_stat_ring, sizeof (struct msk_stat_desc) * MSK_STAT_RING_CNT); + mSoftc->msk_stat_cons = 0; + CSR_WRITE_4 (mSoftc, STAT_CTRL, SC_STAT_RST_SET); + CSR_WRITE_4 (mSoftc, STAT_CTRL, SC_STAT_RST_CLR); + + // Set the status list base address + PhysAddr = mSoftc->msk_stat_ring_paddr; + CSR_WRITE_4 (mSoftc, STAT_LIST_ADDR_LO, MSK_ADDR_LO (PhysAddr)); + CSR_WRITE_4 (mSoftc, STAT_LIST_ADDR_HI, MSK_ADDR_HI (PhysAddr)); + + // Set the status list last index + CSR_WRITE_2 (mSoftc, STAT_LAST_IDX, MSK_STAT_RING_CNT - 1); + if ((mSoftc->msk_hw_id == CHIP_ID_YUKON_EC) && (mSoftc->msk_hw_rev == CHIP_REV_YU_EC_A1)) { + // WA for dev. #4.3 + CSR_WRITE_2 (mSoftc, STAT_TX_IDX_TH, ST_TXTH_IDX_MASK); + // WA for dev. #4.18 + CSR_WRITE_1 (mSoftc, STAT_FIFO_WM, 0x21); + CSR_WRITE_1 (mSoftc, STAT_FIFO_ISR_WM, 0x07); + } else { + CSR_WRITE_2 (mSoftc, STAT_TX_IDX_TH, 0x0a); + CSR_WRITE_1 (mSoftc, STAT_FIFO_WM, 0x10); + if ((mSoftc->msk_hw_id == CHIP_ID_YUKON_XL) && (mSoftc->msk_hw_rev == CHIP_REV_YU_XL_A0)) { + CSR_WRITE_1 (mSoftc, STAT_FIFO_ISR_WM, 0x04); + } else { + CSR_WRITE_1 (mSoftc, STAT_FIFO_ISR_WM, 0x10); + } + CSR_WRITE_4 (mSoftc, STAT_ISR_TIMER_INI, 0x0190); + } + // + // Use default value for STAT_ISR_TIMER_INI, STAT_LEV_TIMER_INI. + // + CSR_WRITE_4 (mSoftc, STAT_TX_TIMER_INI, MSK_USECS (mSoftc, 1000)); + + // Enable status unit + CSR_WRITE_4 (mSoftc, STAT_CTRL, SC_STAT_OP_ON); + + CSR_WRITE_1 (mSoftc, STAT_TX_TIMER_CTRL, TIM_START); + CSR_WRITE_1 (mSoftc, STAT_LEV_TIMER_CTRL, TIM_START); + CSR_WRITE_1 (mSoftc, STAT_ISR_TIMER_CTRL, TIM_START); +} + +static +EFI_STATUS +msk_attach ( + INT32 Port + ) +{ + struct msk_if_softc *sc_if; + INTN i; + EFI_STATUS Status; + + sc_if = mSoftc->msk_if[Port]; + sc_if->msk_md.port = Port; + sc_if->msk_flags = mSoftc->msk_pflags; + + // Setup Tx/Rx queue register offsets + if (Port == MSK_PORT_A) { + sc_if->msk_txq = Q_XA1; + sc_if->msk_txsq = Q_XS1; + sc_if->msk_rxq = Q_R1; + } else { + sc_if->msk_txq = Q_XA2; + sc_if->msk_txsq = Q_XS2; + sc_if->msk_rxq = Q_R2; + } + + Status = msk_txrx_dma_alloc (sc_if); + if (EFI_ERROR (Status)) { + return Status; + } + + /* + * Get station address for this interface. Note that + * dual port cards actually come with three station + * addresses: one for each port, plus an extra. The + * extra one is used by the SysKonnect driver software + * as a 'virtual' station address for when both ports + * are operating in failover mode. Currently we don't + * use this extra address. + */ + for (i = 0; i < NET_ETHER_ADDR_LEN; i++) { + sc_if->MacAddress.Addr[i] = CSR_READ_1 (mSoftc, B2_MAC_1 + (Port * 8) + i); + } + + DEBUG ((EFI_D_NET,"Mac Address: %x.%x.%x.%x.%x.%x\n", + sc_if->MacAddress.Addr[0], sc_if->MacAddress.Addr[1], sc_if->MacAddress.Addr[2], + sc_if->MacAddress.Addr[3], sc_if->MacAddress.Addr[4], sc_if->MacAddress.Addr[5])); + + Status = e1000_probe_and_attach (&sc_if->mii_d, &sc_if->msk_md); + if (EFI_ERROR (Status)) { + mSoftc->msk_if[Port] = NULL; + msk_detach (Port); + } + + return (Status); +} + +/* + * Attach the interface. Allocate softc structures, do ifmedia + * setup and ethernet/BPF attach. + */ +EFI_STATUS +mskc_attach ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + OUT EFI_MAC_ADDRESS *Mac + ) +{ + struct msk_mii_data *mmd; + UINT64 Supports; + UINT8 *PciBarResources; + UINT32 MacAddrL; + UINT32 MacAddrH; + EFI_STATUS Status; + struct msk_if_softc *ScIf; + + mPciIo = PciIo; + mSoftc = AllocateZeroPool (sizeof (struct msk_softc)); + if (mSoftc == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + // + // Save original PCI attributes + // + Status = mPciIo->Attributes ( + mPciIo, + EfiPciIoAttributeOperationGet, + 0, + &mSoftc->OriginalPciAttributes + ); + if (EFI_ERROR (Status)) { + FreePool (mSoftc); + return Status; + } + + Status = mPciIo->Attributes ( + mPciIo, + EfiPciIoAttributeOperationSupported, + 0, + &Supports + ); + if (!EFI_ERROR (Status)) { + Supports &= EFI_PCI_DEVICE_ENABLE; + Status = mPciIo->Attributes ( + mPciIo, + EfiPciIoAttributeOperationEnable, + Supports, + NULL + ); + } + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "Marvell Yukon: Failed to enable NIC controller\n")); + goto RESTORE_PCI_ATTRIBS; + } + + Status = mPciIo->GetBarAttributes (mPciIo, 0, &Supports, (VOID**)&PciBarResources); + if (!EFI_ERROR (Status) && (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR)) { + if (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) { + if (!(((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->SpecificFlag & ACPI_SPECFLAG_PREFETCHABLE)) { + mSoftc->RegBase = ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->AddrRangeMin; + // Should assert that Bar is 32 bits wide + DEBUG ((EFI_D_NET, "Marvell Yukon: GlobalRegistersBase = 0x%x\n", mSoftc->RegBase)); + } else { + Status = EFI_NOT_FOUND; + } + } else { + Status = EFI_NOT_FOUND; + } + } + if (EFI_ERROR (Status)) { + goto RESTORE_PCI_ATTRIBS; + } + + // Clear Software Reset + CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_CLR); + + // Get Hardware ID & Revision + mSoftc->msk_hw_id = CSR_READ_1 (mSoftc, B2_CHIP_ID); + mSoftc->msk_hw_rev = (CSR_READ_1 (mSoftc, B2_MAC_CFG) >> 4) & 0x0f; + + // Bail out if chip is not recognized + if (mSoftc->msk_hw_id < CHIP_ID_YUKON_XL || + mSoftc->msk_hw_id > CHIP_ID_YUKON_OPT || + mSoftc->msk_hw_id == CHIP_ID_YUKON_SUPR || + mSoftc->msk_hw_id == CHIP_ID_YUKON_UNKNOWN) { + DEBUG ((EFI_D_NET, "Marvell Yukon: unknown device: id=0x%02x, rev=0x%02x\n", mSoftc->msk_hw_id, mSoftc->msk_hw_rev)); + Status = EFI_DEVICE_ERROR; + goto RESTORE_PCI_ATTRIBS; + } + DEBUG ((EFI_D_NET, "Marvell Yukon: Marvell Technology Group Ltd. %a Id:0x%02x Rev:0x%02x\n", + model_name[mSoftc->msk_hw_id - CHIP_ID_YUKON_XL], mSoftc->msk_hw_id, mSoftc->msk_hw_rev)); + + mSoftc->msk_process_limit = MSK_PROC_DEFAULT; + mSoftc->msk_int_holdoff = MSK_INT_HOLDOFF_DEFAULT; + + // Set the MAC Address if needed + if (PcdGet64 (PcdYukonMacAddress) != 0) + { + MacAddrH = (UINT32) (((UINT64) PcdGet64 (PcdYukonMacAddress))); + MacAddrL = (UINT32) (((UINT64) PcdGet64 (PcdYukonMacAddress) >> 32) & 0xFFFF); + + CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_ON); + CSR_WRITE_4 (mSoftc, B2_MAC_1, MacAddrH); + CSR_WRITE_4 (mSoftc, B2_MAC_1+4, MacAddrL); + CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + } else { + DEBUG ((EFI_D_NET, "Marvell Yukon: MAC address is invalid (0.0.0.0.0.0)\n")); + } + + // Soft reset + CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_SET); + CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_CLR); + mSoftc->msk_pmd = CSR_READ_1 (mSoftc, B2_PMD_TYP); + + // Check number of MACs + mSoftc->msk_num_port = 1; + if ((CSR_READ_1 (mSoftc, B2_Y2_HW_RES) & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) { + if (!(CSR_READ_1 (mSoftc, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC)) { + mSoftc->msk_num_port++; + } + } + + /* Check bus type. */ + /* if (pci_find_extcap (sc->msk_dev, PCIY_EXPRESS, &reg) == 0) { + sc->msk_bustype = MSK_PEX_BUS; + sc->msk_expcap = reg; + } else if (pci_find_extcap (sc->msk_dev, PCIY_PCIX, &reg) == 0) { + sc->msk_bustype = MSK_PCIX_BUS; + sc->msk_pcixcap = reg; + } else + sc->msk_bustype = MSK_PCI_BUS; +*/ + mSoftc->msk_bustype = MSK_PEX_BUS; /* Only support PCI Express */ + mSoftc->msk_expcap = 1; + + switch (mSoftc->msk_hw_id) { + case CHIP_ID_YUKON_EC: + mSoftc->msk_clock = 125; /* 125 MHz */ + mSoftc->msk_pflags |= MSK_FLAG_JUMBO; + break; + case CHIP_ID_YUKON_EC_U: + mSoftc->msk_clock = 125; /* 125 MHz */ + mSoftc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_JUMBO_NOCSUM; + break; + case CHIP_ID_YUKON_EX: + mSoftc->msk_clock = 125; /* 125 MHz */ + mSoftc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_DESCV2 | MSK_FLAG_AUTOTX_CSUM; + /* + * Yukon Extreme seems to have silicon bug for + * automatic Tx checksum calculation capability. + */ + if (mSoftc->msk_hw_rev == CHIP_REV_YU_EX_B0) { + mSoftc->msk_pflags &= ~MSK_FLAG_AUTOTX_CSUM; + } + /* + * Yukon Extreme A0 could not use store-and-forward + * for jumbo frames, so disable Tx checksum + * offloading for jumbo frames. + */ + if (mSoftc->msk_hw_rev == CHIP_REV_YU_EX_A0) { + mSoftc->msk_pflags |= MSK_FLAG_JUMBO_NOCSUM; + } + break; + case CHIP_ID_YUKON_FE: + mSoftc->msk_clock = 100; /* 100 MHz */ + mSoftc->msk_pflags |= MSK_FLAG_FASTETHER; + break; + case CHIP_ID_YUKON_FE_P: + mSoftc->msk_clock = 50; /* 50 MHz */ + mSoftc->msk_pflags |= MSK_FLAG_FASTETHER | MSK_FLAG_DESCV2 | MSK_FLAG_AUTOTX_CSUM; + if (mSoftc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) { + /* + * XXX + * FE+ A0 has status LE writeback bug so msk (4) + * does not rely on status word of received frame + * in msk_rxeof () which in turn disables all + * hardware assistance bits reported by the status + * word as well as validity of the recevied frame. + * Just pass received frames to upper stack with + * minimal test and let upper stack handle them. + */ + mSoftc->msk_pflags |= MSK_FLAG_NOHWVLAN | MSK_FLAG_NORXCHK | MSK_FLAG_NORX_CSUM; + } + break; + case CHIP_ID_YUKON_XL: + mSoftc->msk_clock = 156; /* 156 MHz */ + mSoftc->msk_pflags |= MSK_FLAG_JUMBO; + break; + case CHIP_ID_YUKON_UL_2: + mSoftc->msk_clock = 125; /* 125 MHz */ + mSoftc->msk_pflags |= MSK_FLAG_JUMBO; + break; + case CHIP_ID_YUKON_OPT: + mSoftc->msk_clock = 125; /* 125 MHz */ + mSoftc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_DESCV2; + break; + default: + mSoftc->msk_clock = 156; /* 156 MHz */ + break; + } + + Status = msk_status_dma_alloc (); + if (EFI_ERROR (Status)) { + goto fail; + } + + // Set base interrupt mask + mSoftc->msk_intrmask = Y2_IS_HW_ERR | Y2_IS_STAT_BMU; + mSoftc->msk_intrhwemask = Y2_IS_TIST_OV | Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP; + + // Reset the adapter + mskc_reset (); + + mskc_setup_rambuffer (); + + ScIf = AllocateZeroPool (sizeof (struct msk_if_softc)); + if (ScIf == NULL) { + Status = EFI_OUT_OF_RESOURCES; + goto fail; + } + mSoftc->msk_if[MSK_PORT_A] = ScIf; + Status = msk_attach (MSK_PORT_A); + if (EFI_ERROR (Status)) { + goto fail; + } + + if (Mac != NULL) { + CopyMem (Mac, &ScIf->MacAddress, sizeof (EFI_MAC_ADDRESS)); + } + + mmd = &ScIf->msk_md; + mmd->port = MSK_PORT_A; + mmd->pmd = mSoftc->msk_pmd; + if (mSoftc->msk_pmd == 'L' || mSoftc->msk_pmd == 'S' || mSoftc->msk_pmd == 'P') { + mmd->mii_flags |= MIIF_HAVEFIBER; + } + + if (mSoftc->msk_num_port > 1) { + ScIf = AllocateZeroPool (sizeof (struct msk_if_softc)); + if (ScIf == NULL) { + Status = EFI_OUT_OF_RESOURCES; + goto fail; + } + mSoftc->msk_if[MSK_PORT_B] = ScIf; + Status = msk_attach (MSK_PORT_B); + if (EFI_ERROR (Status)) { + goto fail; + } + + mmd = &ScIf->msk_md; + mmd->port = MSK_PORT_B; + mmd->pmd = mSoftc->msk_pmd; + if (mSoftc->msk_pmd == 'L' || mSoftc->msk_pmd == 'S' || mSoftc->msk_pmd == 'P') { + mmd->mii_flags |= MIIF_HAVEFIBER; + } + } + + // Create timer for tick + Status = gBS->CreateEvent ( + EVT_NOTIFY_SIGNAL | EVT_TIMER, + TPL_CALLBACK, + mskc_tick, + mSoftc, + &mSoftc->Timer + ); + if (EFI_ERROR (Status)) { + goto fail; + } + + InitializeListHead (&mSoftc->TransmitQueueHead); + InitializeListHead (&mSoftc->TransmitFreeQueueHead); + InitializeListHead (&mSoftc->ReceiveQueueHead); + +fail: + if (EFI_ERROR (Status)) { + mskc_detach (); + } + + return (Status); + +RESTORE_PCI_ATTRIBS: + // + // Restore original PCI attributes + // + mPciIo->Attributes ( + mPciIo, + EfiPciIoAttributeOperationSet, + mSoftc->OriginalPciAttributes, + NULL + ); + FreePool (mSoftc); + return Status; +} + +/* + * Shutdown hardware and free up resources. This can be called any + * time after the mutex has been initialized. It is called in both + * the error case in attach and the normal detach case so it needs + * to be careful about only freeing resources that have actually been + * allocated. + */ +static +VOID +msk_detach ( + INT32 Port + ) +{ + struct msk_if_softc *sc_if; + + sc_if = mSoftc->msk_if[Port]; + + msk_stop (sc_if); + + msk_txrx_dma_free (sc_if); +} + +VOID +mskc_detach ( + VOID + ) +{ + if (mSoftc->msk_if[MSK_PORT_A] != NULL) { + msk_detach (MSK_PORT_A); + FreePool (mSoftc->msk_if[MSK_PORT_A]); + mSoftc->msk_if[MSK_PORT_A] = NULL; + } + if (mSoftc->msk_if[MSK_PORT_B] != NULL) { + msk_detach (MSK_PORT_B); + FreePool (mSoftc->msk_if[MSK_PORT_B]); + mSoftc->msk_if[MSK_PORT_B] = NULL; + } + + /* Disable all interrupts. */ + CSR_WRITE_4 (mSoftc, B0_IMSK, 0); + CSR_READ_4 (mSoftc, B0_IMSK); + CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, 0); + CSR_READ_4 (mSoftc, B0_HWE_IMSK); + + // LED Off. + CSR_WRITE_2 (mSoftc, B0_CTST, Y2_LED_STAT_OFF); + + // Put hardware reset. + CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_SET); + + msk_status_dma_free (); + + if (mSoftc->Timer != NULL) { + gBS->SetTimer (mSoftc->Timer, TimerCancel, 0); + gBS->CloseEvent (mSoftc->Timer); + + mSoftc->Timer = NULL; + } + // + // Restore original PCI attributes + // + mPciIo->Attributes ( + mPciIo, + EfiPciIoAttributeOperationSet, + mSoftc->OriginalPciAttributes, + NULL + ); + FreePool (mSoftc); + mSoftc = NULL; + mPciIo = NULL; +} + +/* Create status DMA region. */ +static +EFI_STATUS +msk_status_dma_alloc ( + VOID + ) +{ + EFI_STATUS Status; + UINTN Length; + + Status = mPciIo->AllocateBuffer (mPciIo, AllocateAnyPages, EfiBootServicesData, + BYTES_TO_PAGES (MSK_STAT_RING_SZ), (VOID**)&mSoftc->msk_stat_ring, 0); + + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: failed to allocate DMA'able memory for status ring\n")); + return Status; + } + ASSERT (mSoftc->msk_stat_ring != NULL); + + Length = MSK_STAT_RING_SZ; + Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterCommonBuffer, mSoftc->msk_stat_ring, + &Length, &mSoftc->msk_stat_ring_paddr, &mSoftc->msk_stat_map); + ASSERT (Length == MSK_STAT_RING_SZ); + + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: failed to map DMA'able memory for status ring\n")); + } + + return Status; +} + +static +VOID +msk_status_dma_free ( + VOID + ) +{ + if (mSoftc->msk_stat_map) { + mPciIo->Unmap (mPciIo, mSoftc->msk_stat_map); + if (mSoftc->msk_stat_ring) { + mPciIo->FreeBuffer (mPciIo, BYTES_TO_PAGES (MSK_STAT_RING_SZ), mSoftc->msk_stat_ring); + mSoftc->msk_stat_ring = NULL; + } + mSoftc->msk_stat_map = NULL; + } +} + +static +EFI_STATUS +msk_txrx_dma_alloc ( + struct msk_if_softc *sc_if + ) +{ + struct msk_txdesc *txd; + struct msk_rxdesc *rxd; + INTN i; + UINTN Length; + EFI_STATUS Status; + + Status = mPciIo->AllocateBuffer (mPciIo, AllocateAnyPages, EfiBootServicesData, + BYTES_TO_PAGES (MSK_TX_RING_SZ), (VOID**)&sc_if->msk_rdata.msk_tx_ring, 0); + + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: failed to allocate DMA'able memory for Tx ring\n")); + goto fail; + } + ASSERT (sc_if->msk_rdata.msk_tx_ring != NULL); + + Length = MSK_TX_RING_SZ; + Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterCommonBuffer, sc_if->msk_rdata.msk_tx_ring, + &Length, &sc_if->msk_rdata.msk_tx_ring_paddr, &sc_if->msk_cdata.msk_tx_ring_map); + + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: failed to map DMA'able memory for Tx ring\n")); + goto fail; + } + ASSERT (Length == MSK_TX_RING_SZ); + + Status = mPciIo->AllocateBuffer (mPciIo, AllocateAnyPages, EfiBootServicesData, + BYTES_TO_PAGES (MSK_RX_RING_SZ), (VOID**)&sc_if->msk_rdata.msk_rx_ring, 0); + + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: failed to allocate DMA'able memory for Rx ring\n")); + goto fail; + } + ASSERT (sc_if->msk_rdata.msk_rx_ring != NULL); + + Length = MSK_RX_RING_SZ; + Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterCommonBuffer, sc_if->msk_rdata.msk_rx_ring, + &Length, &sc_if->msk_rdata.msk_rx_ring_paddr, &sc_if->msk_cdata.msk_rx_ring_map); + + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: failed to map DMA'able memory for Rx ring\n")); + goto fail; + } + ASSERT (Length == MSK_RX_RING_SZ); + + // Create DMA maps for Tx buffers. + for (i = 0; i < MSK_TX_RING_CNT; i++) { + txd = &sc_if->msk_cdata.msk_txdesc[i]; + ZeroMem (&(txd->tx_m), sizeof (MSK_DMA_BUF)); + } + // Create DMA maps for Rx buffers. + for (i = 0; i < MSK_RX_RING_CNT; i++) { + rxd = &sc_if->msk_cdata.msk_rxdesc[i]; + ZeroMem (&(rxd->rx_m), sizeof (MSK_DMA_BUF)); + } + +fail: + return (Status); +} + +static +VOID +msk_txrx_dma_free ( + struct msk_if_softc *sc_if + ) +{ + struct msk_txdesc *txd; + struct msk_rxdesc *rxd; + INTN i; + + // Tx ring + if (sc_if->msk_cdata.msk_tx_ring_map) { + mPciIo->Unmap (mPciIo, sc_if->msk_cdata.msk_tx_ring_map); + if (sc_if->msk_rdata.msk_tx_ring) { + mPciIo->FreeBuffer (mPciIo, BYTES_TO_PAGES (MSK_TX_RING_SZ), sc_if->msk_rdata.msk_tx_ring); + sc_if->msk_rdata.msk_tx_ring = NULL; + } + sc_if->msk_cdata.msk_tx_ring_map = NULL; + } + + // Rx ring + if (sc_if->msk_cdata.msk_rx_ring_map) { + mPciIo->Unmap (mPciIo, sc_if->msk_cdata.msk_rx_ring_map); + if (sc_if->msk_rdata.msk_rx_ring) { + mPciIo->FreeBuffer (mPciIo, BYTES_TO_PAGES (MSK_RX_RING_SZ), sc_if->msk_rdata.msk_rx_ring); + sc_if->msk_rdata.msk_rx_ring = NULL; + } + sc_if->msk_cdata.msk_rx_ring_map = NULL; + } + + // Tx buffers + for (i = 0; i < MSK_TX_RING_CNT; i++) { + txd = &sc_if->msk_cdata.msk_txdesc[i]; + if (txd->tx_m.DmaMapping) { + mPciIo->Unmap (mPciIo, txd->tx_m.DmaMapping); + ZeroMem (&(txd->tx_m), sizeof (MSK_DMA_BUF)); + // We don't own the transmit buffers so don't free them + } + } + // Rx buffers + for (i = 0; i < MSK_RX_RING_CNT; i++) { + rxd = &sc_if->msk_cdata.msk_rxdesc[i]; + if (rxd->rx_m.DmaMapping) { + mPciIo->Unmap (mPciIo, rxd->rx_m.DmaMapping); + // Free Rx buffers as we own these + if(rxd->rx_m.Buf != NULL) { + mPciIo->FreeBuffer (mPciIo, EFI_SIZE_TO_PAGES (rxd->rx_m.Length), rxd->rx_m.Buf); + rxd->rx_m.Buf = NULL; + } + ZeroMem (&(rxd->rx_m), sizeof (MSK_DMA_BUF)); + } + } +} + +static +EFI_STATUS +msk_encap ( + struct msk_if_softc *sc_if, + MSK_SYSTEM_BUF *m_head + ) +{ + struct msk_txdesc *txd; + struct msk_txdesc *txd_last; + struct msk_tx_desc *tx_le; + VOID *Mapping; + EFI_PHYSICAL_ADDRESS BusPhysAddr; + UINTN BusLength; + UINT32 control; + UINT32 prod; + UINT32 si; + EFI_STATUS Status; + + prod = sc_if->msk_cdata.msk_tx_prod; + txd = &sc_if->msk_cdata.msk_txdesc[prod]; + txd_last = txd; + BusLength = m_head->Length; + Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterRead, m_head->Buf, + &BusLength, &BusPhysAddr, &txd->tx_m.DmaMapping); + + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: failed to map DMA'able memory for Tx buffer\n")); + return Status; + } + ASSERT (BusLength == m_head->Length); + + control = 0; + + si = prod; + tx_le = &sc_if->msk_rdata.msk_tx_ring[prod]; + tx_le->msk_addr = htole32 (MSK_ADDR_LO (BusPhysAddr)); + tx_le->msk_control = htole32 (BusLength | control | OP_PACKET); + sc_if->msk_cdata.msk_tx_cnt++; + MSK_INC (prod, MSK_TX_RING_CNT); + + // Update producer index + sc_if->msk_cdata.msk_tx_prod = prod; + + // Set EOP on the last descriptor + prod = (prod + MSK_TX_RING_CNT - 1) % MSK_TX_RING_CNT; + tx_le = &sc_if->msk_rdata.msk_tx_ring[prod]; + tx_le->msk_control |= htole32 (EOP); + + // Turn the first descriptor ownership to hardware + tx_le = &sc_if->msk_rdata.msk_tx_ring[si]; + tx_le->msk_control |= htole32 (HW_OWNER); + + txd = &sc_if->msk_cdata.msk_txdesc[prod]; + Mapping = txd_last->tx_m.DmaMapping; + txd_last->tx_m.DmaMapping = txd->tx_m.DmaMapping; + txd->tx_m.DmaMapping = Mapping; + txd->tx_m.Buf = m_head->Buf; + txd->tx_m.Length = m_head->Length; + + return EFI_SUCCESS; +} + +EFI_STATUS +mskc_transmit ( + UINTN BufferSize, + VOID *Buffer + ) +{ + MSK_LINKED_SYSTEM_BUF *LinkedSystemBuf; + + LinkedSystemBuf = AllocateZeroPool (sizeof (MSK_LINKED_SYSTEM_BUF)); + if (LinkedSystemBuf == NULL) { + return EFI_OUT_OF_RESOURCES; + } + LinkedSystemBuf->Signature = TX_MBUF_SIGNATURE; + // + // Add the passed Buffer to the transmit queue. Don't copy. + // + LinkedSystemBuf->SystemBuf.Buf = Buffer; + LinkedSystemBuf->SystemBuf.Length = BufferSize; + InsertTailList (&mSoftc->TransmitQueueHead, &LinkedSystemBuf->Link); + msk_start (MSK_PORT_A); + return EFI_SUCCESS; +} + +void +mskc_getstatus ( + OUT UINT32 *InterruptStatus, OPTIONAL + OUT VOID **TxBuf OPTIONAL + ) +{ + //struct msk_chain_data* cdata; + MSK_LINKED_SYSTEM_BUF *m_head; + + // Interrupt status is not read from the device when InterruptStatus is NULL + if (InterruptStatus != NULL) { + // Check the interrupt lines + msk_intr (); + } + + // The transmit buffer status is not read when TxBuf is NULL + if (TxBuf != NULL) { + *((UINT8 **) TxBuf) = (UINT8 *) 0; + if( !IsListEmpty (&mSoftc->TransmitFreeQueueHead)) + { + m_head = CR (GetFirstNode (&mSoftc->TransmitFreeQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE); + if(m_head != NULL) { + *TxBuf = m_head->SystemBuf.Buf; + RemoveEntryList (&m_head->Link); + FreePool (m_head); + } + } + } +} + +static +VOID +msk_start ( + INT32 Port + ) +{ + EFI_STATUS Status; + struct msk_if_softc *sc_if; + MSK_LINKED_SYSTEM_BUF *m_head; + INTN enq; + + sc_if = mSoftc->msk_if[Port]; + for (enq = 0; !IsListEmpty (&mSoftc->TransmitQueueHead) && + sc_if->msk_cdata.msk_tx_cnt < (MSK_TX_RING_CNT - MSK_RESERVED_TX_DESC_CNT); ) + { + + m_head = CR (GetFirstNode (&mSoftc->TransmitQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE); + if (m_head == NULL) { + break; + } + // + // Pack the data into the transmit ring. If we + // don't have room, set the OACTIVE flag and wait + // for the NIC to drain the ring. + // + Status = msk_encap (sc_if, &m_head->SystemBuf); + if (EFI_ERROR (Status)) { + break; + } + + RemoveEntryList (&m_head->Link); + InsertTailList (&mSoftc->TransmitFreeQueueHead, &m_head->Link); + //FreePool (m_head); + enq++; + } + + if (enq > 0) { + // Transmit + CSR_WRITE_2 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_txq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_tx_prod); + + // Set a timeout in case the chip goes out to lunch. + // sc_if->msk_watchdog_timer = MSK_TX_TIMEOUT; + } +} + +/*static VOID +msk_watchdog (struct msk_if_softc *sc_if) +{ + struct ifnet *ifp; + + MSK_IF_LOCK_ASSERT (sc_if); + + if (sc_if->msk_watchdog_timer == 0 || --sc_if->msk_watchdog_timer) + return; + ifp = sc_if->msk_ifp; + if ((sc_if->msk_flags & MSK_FLAG_LINK) == 0) { + if (bootverbose) + if_printf (sc_if->msk_ifp, "watchdog timeout " + "(missed link)\n"); + ifp->if_oerrors++; + ifp->if_drv_flags &= ~IFF_DRV_RUNNING; + msk_init_locked (sc_if); + return; + } + + if_printf (ifp, "watchdog timeout\n"); + ifp->if_oerrors++; + ifp->if_drv_flags &= ~IFF_DRV_RUNNING; + msk_init_locked (sc_if); + if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + msk_start_locked (ifp); +} +*/ +VOID +mskc_shutdown ( + VOID + ) +{ + INTN i; + + for (i = 0; i < mSoftc->msk_num_port; i++) { + if (mSoftc->msk_if[i] != NULL) { + msk_stop (mSoftc->msk_if[i]); + } + } + gBS->SetTimer (mSoftc->Timer, TimerCancel, 0); + + /* Put hardware reset. */ + CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_SET); +} + +/*static int +mskc_suspend (device_t dev) +{ + struct msk_softc *sc; + int i; + + sc = device_get_softc (dev); + + MSK_LOCK(sc); + + for (i = 0; i < sc->msk_num_port; i++) { + if (sc->msk_if[i] != NULL && sc->msk_if[i]->msk_ifp != NULL && + ((sc->msk_if[i]->msk_ifp->if_drv_flags & + IFF_DRV_RUNNING) != 0)) + msk_stop (sc->msk_if[i]); + } +*/ +/* Disable all interrupts. */ +/* CSR_WRITE_4 (sc, B0_IMSK, 0); + CSR_READ_4 (sc, B0_IMSK); + CSR_WRITE_4 (sc, B0_HWE_IMSK, 0); + CSR_READ_4 (sc, B0_HWE_IMSK); + + msk_phy_power (sc, MSK_PHY_POWERDOWN); +*/ +/* Put hardware reset. */ +/* CSR_WRITE_2 (sc, B0_CTST, CS_RST_SET); + sc->msk_pflags |= MSK_FLAG_SUSPEND; + + MSK_UNLOCK(sc); + + return (0); +} + +static int +mskc_resume (device_t dev) +{ + struct msk_softc *sc; + int i; + + sc = device_get_softc (dev); + + MSK_LOCK(sc); + + mskc_reset (sc); + for (i = 0; i < sc->msk_num_port; i++) { + if (sc->msk_if[i] != NULL && sc->msk_if[i]->msk_ifp != NULL && + ((sc->msk_if[i]->msk_ifp->if_flags & IFF_UP) != 0)) { + sc->msk_if[i]->msk_ifp->if_drv_flags &= + ~IFF_DRV_RUNNING; + msk_init_locked (sc->msk_if[i]); + } + } + sc->msk_pflags &= ~MSK_FLAG_SUSPEND; + + MSK_UNLOCK(sc); + + return (0); +}*/ + +EFI_STATUS +mskc_receive ( + IN OUT UINTN *BufferSize, + OUT VOID *Buffer + ) +{ + MSK_LINKED_DMA_BUF *mBuf; + + msk_intr (); // check the interrupt lines + + if (IsListEmpty (&mSoftc->ReceiveQueueHead)) { + *BufferSize = 0; + return EFI_NOT_READY; + } + + mBuf = CR (GetFirstNode (&mSoftc->ReceiveQueueHead), MSK_LINKED_DMA_BUF, Link, RX_MBUF_SIGNATURE); + if (mBuf->DmaBuf.Length > *BufferSize) { + *BufferSize = mBuf->DmaBuf.Length; + DEBUG ((EFI_D_NET, "Marvell Yukon: Receive buffer is too small: Provided = %d, Received = %d\n", + *BufferSize, mBuf->DmaBuf.Length)); + return EFI_BUFFER_TOO_SMALL; + } + *BufferSize = mBuf->DmaBuf.Length; + RemoveEntryList (&mBuf->Link); + CopyMem (Buffer, mBuf->DmaBuf.Buf, *BufferSize); + FreePool(mBuf->DmaBuf.Buf); + FreePool (mBuf); + return EFI_SUCCESS; +} + +static VOID +msk_rxeof ( + struct msk_if_softc *sc_if, + UINT32 status, + UINT32 control, + INTN len + ) +{ + EFI_STATUS Status; + MSK_LINKED_DMA_BUF *m_link; + struct msk_rxdesc *rxd; + INTN cons; + INTN rxlen; + + DEBUG ((EFI_D_NET, "Marvell Yukon: rxeof\n")); + + cons = sc_if->msk_cdata.msk_rx_cons; + do { + rxlen = status >> 16; + if ((sc_if->msk_flags & MSK_FLAG_NORXCHK) != 0) { + // + // For controllers that returns bogus status code + // just do minimal check and let upper stack + // handle this frame. + // + if (len > MAX_SUPPORTED_PACKET_SIZE || len < NET_ETHER_ADDR_LEN) { + msk_discard_rxbuf (sc_if, cons); + break; + } + } else if (len > sc_if->msk_framesize || + ((status & GMR_FS_ANY_ERR) != 0) || + ((status & GMR_FS_RX_OK) == 0) || (rxlen != len)) { + msk_discard_rxbuf (sc_if, cons); + break; + } + + Status = msk_newbuf (sc_if, cons); + if (EFI_ERROR (Status)) { + // Reuse old buffer + msk_discard_rxbuf (sc_if, cons); + } + m_link = AllocateZeroPool (sizeof (MSK_LINKED_DMA_BUF)); + if (m_link != NULL) { + rxd = &sc_if->msk_cdata.msk_rxdesc[cons]; + + m_link->Signature = RX_MBUF_SIGNATURE; + m_link->DmaBuf.Buf = AllocateZeroPool (len); + CopyMem (m_link->DmaBuf.Buf, rxd->rx_m.Buf, len); + m_link->DmaBuf.Length = len; + m_link->DmaBuf.DmaMapping = rxd->rx_m.DmaMapping; + + InsertTailList (&mSoftc->ReceiveQueueHead, &m_link->Link); + } else { + DEBUG ((EFI_D_NET, "Marvell Yukon: failed to allocate receive buffer link. Dropping Frame\n")); + } + } while (0); + + MSK_INC (sc_if->msk_cdata.msk_rx_cons, MSK_RX_RING_CNT); + MSK_INC (sc_if->msk_cdata.msk_rx_prod, MSK_RX_RING_CNT); +} + +static +VOID +msk_txeof ( + struct msk_if_softc *sc_if, + INTN idx + ) +{ + struct msk_txdesc *txd; + struct msk_tx_desc *cur_tx; + UINT32 control; + INTN cons; + INTN prog; + + DEBUG ((EFI_D_NET, "Marvell Yukon: txeof\n")); + // + // Go through our tx ring and free mbufs for those + // frames that have been sent. + // + cons = sc_if->msk_cdata.msk_tx_cons; + prog = 0; + for (; cons != idx; MSK_INC (cons, MSK_TX_RING_CNT)) { + if (sc_if->msk_cdata.msk_tx_cnt <= 0) { + break; + } + prog++; + cur_tx = &sc_if->msk_rdata.msk_tx_ring[cons]; + control = le32toh (cur_tx->msk_control); + sc_if->msk_cdata.msk_tx_cnt--; + if ((control & EOP) == 0) { + continue; + } + txd = &sc_if->msk_cdata.msk_txdesc[cons]; + mPciIo->Unmap (mPciIo, txd->tx_m.DmaMapping); + ZeroMem (&(txd->tx_m), sizeof (MSK_DMA_BUF)); + // We don't own the transmit buffers so don't free them + } + + if (prog > 0) { + sc_if->msk_cdata.msk_tx_cons = cons; + // if (sc_if->msk_cdata.msk_tx_cnt == 0) + // sc_if->msk_watchdog_timer = 0; + // No need to sync LEs as we didn't update LEs. + } +} + +VOID +mskc_tick ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + e1000phy_tick (); + msk_handle_events (); +} + +static +VOID +msk_intr_phy ( + struct msk_if_softc *sc_if + ) +{ + UINT16 status; + + msk_phy_readreg (sc_if->msk_md.port, PHY_MARV_INT_STAT); + status = msk_phy_readreg (sc_if->msk_md.port, PHY_MARV_INT_STAT); + + // Handle FIFO Underrun/Overflow ? + if ((status & PHY_M_IS_FIFO_ERROR)) { + DEBUG ((EFI_D_NET, "Marvell Yukon: PHY FIFO underrun/overflow.\n")); + } +} + +static +VOID +msk_intr_gmac ( + struct msk_if_softc *sc_if + ) +{ + UINT8 status; + + status = CSR_READ_1 (mSoftc, MR_ADDR (sc_if->msk_md.port, GMAC_IRQ_SRC)); + + // GMAC Rx FIFO overrun. + if ((status & GM_IS_RX_FF_OR) != 0) { + CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, RX_GMF_CTRL_T), GMF_CLI_RX_FO); + } + // GMAC Tx FIFO underrun. + if ((status & GM_IS_TX_FF_UR) != 0) { + CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), GMF_CLI_TX_FU); + //device_printf (sc_if->msk_if_dev, "Tx FIFO underrun!\n");*/ + DEBUG ((EFI_D_NET, "Marvell Yukon: Tx FIFO underrun!\n")); + /* + * XXX + * In case of Tx underrun, we may need to flush/reset + * Tx MAC but that would also require resynchronization + * with status LEs. Reintializing status LEs would + * affect other port in dual MAC configuration so it + * should be aVOIDed as possible as we can. + * Due to lack of documentation it's all vague guess but + * it needs more investigation. + */ + } +} + +static +VOID +msk_handle_hwerr ( + struct msk_if_softc *sc_if, + UINT32 status + ) +{ + if ((status & Y2_IS_PAR_RD1) != 0) { + DEBUG ((EFI_D_NET, "Marvell Yukon: RAM buffer read parity error\n")); + // Clear IRQ. + CSR_WRITE_2 (mSoftc, SELECT_RAM_BUFFER (sc_if->msk_md.port, B3_RI_CTRL), RI_CLR_RD_PERR); + } + if ((status & Y2_IS_PAR_WR1) != 0) { + DEBUG ((EFI_D_NET, "Marvell Yukon: RAM buffer write parity error\n")); + // Clear IRQ + CSR_WRITE_2 (mSoftc, SELECT_RAM_BUFFER (sc_if->msk_md.port, B3_RI_CTRL), RI_CLR_WR_PERR); + } + if ((status & Y2_IS_PAR_MAC1) != 0) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Tx MAC parity error\n")); + // Clear IRQ + CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), GMF_CLI_TX_PE); + } + if ((status & Y2_IS_PAR_RX1) != 0) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Rx parity error\n")); + // Clear IRQ + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_CLR_IRQ_PAR); + } + if ((status & (Y2_IS_TCP_TXS1 | Y2_IS_TCP_TXA1)) != 0) { + DEBUG ((EFI_D_NET, "Marvell Yukon: TCP segmentation error\n")); + // Clear IRQ + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_CLR_IRQ_TCP); + } +} + +static +VOID +msk_intr_hwerr ( + VOID + ) +{ + UINT32 status; + UINT32 tlphead[4]; + + status = CSR_READ_4 (mSoftc, B0_HWE_ISRC); + + // Time Stamp timer overflow. + if ((status & Y2_IS_TIST_OV) != 0) { + CSR_WRITE_1 (mSoftc, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); + } + if ((status & Y2_IS_PCI_NEXP) != 0) { + /* + * PCI Express Error occured which is not described in PEX + * spec. + * This error is also mapped either to Master Abort ( + * Y2_IS_MST_ERR) or Target Abort (Y2_IS_IRQ_STAT) bit and + * can only be cleared there. + */ + DEBUG ((EFI_D_NET, "Marvell Yukon: PCI Express protocol violation error\n")); + } + + if ((status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) != 0) { + + if ((status & Y2_IS_MST_ERR) != 0) { + DEBUG ((EFI_D_NET, "Marvell Yukon: unexpected IRQ Status error\n")); + } else { + DEBUG ((EFI_D_NET, "Marvell Yukon: unexpected IRQ Master error\n")); + } + // Reset all bits in the PCI status register + clear_pci_errors (); + } + + // Check for PCI Express Uncorrectable Error. + if ((status & Y2_IS_PCI_EXP) != 0) { + UINT32 v32; + + /* + * On PCI Express bus bridges are called root complexes (RC). + * PCI Express errors are recognized by the root complex too, + * which requests the system to handle the problem. After + * error occurrence it may be that no access to the adapter + * may be performed any longer. + */ + + v32 = CSR_PCI_READ_4 (mSoftc, PEX_UNC_ERR_STAT); + if ((v32 & PEX_UNSUP_REQ) != 0) { + // Ignore unsupported request error. + DEBUG ((EFI_D_NET, "Marvell Yukon: Uncorrectable PCI Express error\n")); + } + if ((v32 & (PEX_FATAL_ERRORS | PEX_POIS_TLP)) != 0) { + INTN i; + + // Get TLP header form Log Registers. + for (i = 0; i < 4; i++) { + tlphead[i] = CSR_PCI_READ_4 (mSoftc, PEX_HEADER_LOG + i * 4); + } + // Check for vendor defined broadcast message. + if (!(tlphead[0] == 0x73004001 && tlphead[1] == 0x7f)) { + mSoftc->msk_intrhwemask &= ~Y2_IS_PCI_EXP; + CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, mSoftc->msk_intrhwemask); + CSR_READ_4 (mSoftc, B0_HWE_IMSK); + } + } + // Clear the interrupt + CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_ON); + CSR_PCI_WRITE_4 (mSoftc, PEX_UNC_ERR_STAT, 0xffffffff); + CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + } + + if ((status & Y2_HWE_L1_MASK) != 0 && mSoftc->msk_if[MSK_PORT_A] != NULL) { + msk_handle_hwerr (mSoftc->msk_if[MSK_PORT_A], status); + } + if ((status & Y2_HWE_L2_MASK) != 0 && mSoftc->msk_if[MSK_PORT_B] != NULL) { + msk_handle_hwerr (mSoftc->msk_if[MSK_PORT_B], status >> 8); + } +} + +static +__inline +VOID +msk_rxput ( + struct msk_if_softc *sc_if + ) +{ + CSR_WRITE_2 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_rx_prod); +} + +static +INTN +msk_handle_events ( + VOID + ) +{ + struct msk_if_softc *sc_if; + INTN rxput[2]; + struct msk_stat_desc *sd; + UINT32 control; + UINT32 status; + INTN cons; + INTN len; + INTN port; + INTN rxprog; + + if (mSoftc->msk_stat_cons == CSR_READ_2 (mSoftc, STAT_PUT_IDX)) { + return (0); + } + + rxput[MSK_PORT_A] = rxput[MSK_PORT_B] = 0; + rxprog = 0; + cons = mSoftc->msk_stat_cons; + for (;;) { + sd = &mSoftc->msk_stat_ring[cons]; + control = le32toh (sd->msk_control); + if ((control & HW_OWNER) == 0) { + break; + } + control &= ~HW_OWNER; + sd->msk_control = htole32 (control); + status = le32toh (sd->msk_status); + len = control & STLE_LEN_MASK; + port = (control >> 16) & 0x01; + sc_if = mSoftc->msk_if[port]; + if (sc_if == NULL) { + DEBUG ((EFI_D_NET, "Marvell Yukon: invalid port opcode 0x%08x\n", control & STLE_OP_MASK)); + continue; + } + + switch (control & STLE_OP_MASK) { + case OP_RXSTAT: + msk_rxeof (sc_if, status, control, len); + rxprog++; + // + // Because there is no way to sync single Rx LE + // put the DMA sync operation off until the end of + // event processing. + // + rxput[port]++; + // Update prefetch unit if we've passed water mark + if (rxput[port] >= sc_if->msk_cdata.msk_rx_putwm) { + msk_rxput (sc_if); + rxput[port] = 0; + } + break; + case OP_TXINDEXLE: + if (mSoftc->msk_if[MSK_PORT_A] != NULL) { + msk_txeof (mSoftc->msk_if[MSK_PORT_A], status & STLE_TXA1_MSKL); + } + if (mSoftc->msk_if[MSK_PORT_B] != NULL) { + msk_txeof (mSoftc->msk_if[MSK_PORT_B], + ((status & STLE_TXA2_MSKL) >> + STLE_TXA2_SHIFTL) | + ((len & STLE_TXA2_MSKH) << + STLE_TXA2_SHIFTH)); + } + break; + default: + DEBUG ((EFI_D_NET, "Marvell Yukon: unhandled opcode 0x%08x\n", control & STLE_OP_MASK)); + break; + } + MSK_INC (cons, MSK_STAT_RING_CNT); + if (rxprog > mSoftc->msk_process_limit) { + break; + } + } + + mSoftc->msk_stat_cons = cons; + + if (rxput[MSK_PORT_A] > 0) { + msk_rxput (mSoftc->msk_if[MSK_PORT_A]); + } + if (rxput[MSK_PORT_B] > 0) { + msk_rxput (mSoftc->msk_if[MSK_PORT_B]); + } + + return (mSoftc->msk_stat_cons != CSR_READ_2 (mSoftc, STAT_PUT_IDX)); +} + +STATIC +VOID +msk_intr ( + VOID + ) +{ + struct msk_if_softc *sc_if0; + struct msk_if_softc *sc_if1; + UINT32 Status; + INTN domore; + + // Reading B0_Y2_SP_ISRC2 masks further interrupts + Status = CSR_READ_4 (mSoftc, B0_Y2_SP_ISRC2); + if (Status == 0 || Status == 0xffffffff || + (mSoftc->msk_pflags & MSK_FLAG_SUSPEND) != 0 || + (Status & mSoftc->msk_intrmask) == 0) + { + // Leave ISR - Reenable interrupts + CSR_WRITE_4 (mSoftc, B0_Y2_SP_ICR, 2); + return; + } + + sc_if0 = mSoftc->msk_if[MSK_PORT_A]; + sc_if1 = mSoftc->msk_if[MSK_PORT_B]; + + if ((Status & Y2_IS_IRQ_PHY1) != 0 && sc_if0 != NULL) { + msk_intr_phy (sc_if0); + } + if ((Status & Y2_IS_IRQ_PHY2) != 0 && sc_if1 != NULL) { + msk_intr_phy (sc_if1); + } + if ((Status & Y2_IS_IRQ_MAC1) != 0 && sc_if0 != NULL) { + msk_intr_gmac (sc_if0); + } + if ((Status & Y2_IS_IRQ_MAC2) != 0 && sc_if1 != NULL) { + msk_intr_gmac (sc_if1); + } + if ((Status & (Y2_IS_CHK_RX1 | Y2_IS_CHK_RX2)) != 0) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Rx descriptor error\n")); + mSoftc->msk_intrmask &= ~(Y2_IS_CHK_RX1 | Y2_IS_CHK_RX2); + CSR_WRITE_4 (mSoftc, B0_IMSK, mSoftc->msk_intrmask); + CSR_READ_4 (mSoftc, B0_IMSK); + } + if ((Status & (Y2_IS_CHK_TXA1 | Y2_IS_CHK_TXA2)) != 0) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Tx descriptor error\n")); + mSoftc->msk_intrmask &= ~(Y2_IS_CHK_TXA1 | Y2_IS_CHK_TXA2); + CSR_WRITE_4 (mSoftc, B0_IMSK, mSoftc->msk_intrmask); + CSR_READ_4 (mSoftc, B0_IMSK); + } + if ((Status & Y2_IS_HW_ERR) != 0) { + msk_intr_hwerr (); + } + + domore = msk_handle_events (); + if ((Status & Y2_IS_STAT_BMU) != 0 && domore == 0) { + CSR_WRITE_4 (mSoftc, STAT_CTRL, SC_STAT_CLR_IRQ); + } + + // Leave ISR - Reenable interrupts + CSR_WRITE_4 (mSoftc, B0_Y2_SP_ICR, 2); +} + +static +VOID +msk_set_tx_stfwd ( + struct msk_if_softc *sc_if + ) +{ + /* struct msk_softc *sc; + struct ifnet *ifp; + + ifp = sc_if->msk_ifp; + sc = sc_if->msk_softc; + switch (sc->msk_hw_id) { + case CHIP_ID_YUKON_EX: + if (sc->msk_hw_rev == CHIP_REV_YU_EX_A0) + goto yukon_ex_workaround; + if (ifp->if_mtu > ETHERMTU) + CSR_WRITE_4 (sc, + MR_ADDR (sc_if->msk_port, TX_GMF_CTRL_T), + TX_JUMBO_ENA | TX_STFW_ENA); + else + CSR_WRITE_4 (sc, + MR_ADDR (sc_if->msk_port, TX_GMF_CTRL_T), + TX_JUMBO_DIS | TX_STFW_ENA); + break; + default: +yukon_ex_workaround: + if (ifp->if_mtu > ETHERMTU) {*/ + /* Set Tx GMAC FIFO Almost Empty Threshold. */ + /* CSR_WRITE_4 (sc, + MR_ADDR (sc_if->msk_port, TX_GMF_AE_THR), + MSK_ECU_JUMBO_WM << 16 | MSK_ECU_AE_THR);*/ + /* Disable Store & Forward mode for Tx. */ + /* CSR_WRITE_4 (sc, + MR_ADDR (sc_if->msk_port, TX_GMF_CTRL_T), + TX_JUMBO_ENA | TX_STFW_DIS); + } else {*/ + /* Enable Store & Forward mode for Tx. */ + /* CSR_WRITE_4 (sc, + MR_ADDR (sc_if->msk_port, TX_GMF_CTRL_T), + TX_JUMBO_DIS | TX_STFW_ENA); + } + break; + }*/ + // Disable jumbo frames for Tx + CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), TX_JUMBO_DIS | TX_STFW_ENA); +} + +EFI_STATUS +mskc_init ( + VOID + ) +{ + EFI_STATUS Status; + + // Just init port A + Status = msk_init (mSoftc->msk_if[MSK_PORT_A]); + if (EFI_ERROR (Status)) { + return Status; + } + Status = gBS->SetTimer (mSoftc->Timer, TimerPeriodic, TICKS_PER_SECOND); + if (EFI_ERROR (Status)) { + mskc_shutdown (); + } + return Status; +} + +static +EFI_STATUS +msk_init ( + IN struct msk_if_softc *sc_if + ) +{ + UINT8 *eaddr; + UINT16 gmac; + UINT32 reg; + EFI_STATUS Status; + INTN port = sc_if->msk_md.port; + + // Cancel pending I/O and free all Rx/Tx buffers. + msk_stop (sc_if); + + sc_if->msk_framesize = MAX_SUPPORTED_PACKET_SIZE; + + // GMAC Control reset. + CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_RST_SET); + CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_RST_CLR); + CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_F_LOOPB_OFF); + if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) { + CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | GMC_BYP_RETR_ON); + } + + // + // Initialize GMAC first such that speed/duplex/flow-control + // parameters are renegotiated when interface is brought up. + // + GMAC_WRITE_2 (mSoftc, port, GM_GP_CTRL, 0); + + // Dummy read the Interrupt Source Register + CSR_READ_1 (mSoftc, MR_ADDR (port, GMAC_IRQ_SRC)); + + // Clear MIB stats + msk_stats_clear (sc_if); + + // Disable FCS + GMAC_WRITE_2 (mSoftc, port, GM_RX_CTRL, GM_RXCR_CRC_DIS); + + // Setup Transmit Control Register + GMAC_WRITE_2 (mSoftc, port, GM_TX_CTRL, TX_COL_THR (TX_COL_DEF)); + + // Setup Transmit Flow Control Register + GMAC_WRITE_2 (mSoftc, port, GM_TX_FLOW_CTRL, 0xffff); + + // Setup Transmit Parameter Register + GMAC_WRITE_2 (mSoftc, port, GM_TX_PARAM, + TX_JAM_LEN_VAL (TX_JAM_LEN_DEF) | TX_JAM_IPG_VAL (TX_JAM_IPG_DEF) | + TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) | TX_BACK_OFF_LIM(TX_BOF_LIM_DEF)); + + gmac = DATA_BLIND_VAL (DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA | IPG_DATA_VAL (IPG_DATA_DEF); + + // if (ifp->if_mtu > ETHERMTU) + // gmac |= GM_SMOD_JUMBO_ENA; + GMAC_WRITE_2 (mSoftc, port, GM_SERIAL_MODE, gmac); + + // Set station address + eaddr = sc_if->MacAddress.Addr; + GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_1L, eaddr[0] | (eaddr[1] << 8)); + GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_1M, eaddr[2] | (eaddr[3] << 8)); + GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_1H, eaddr[4] | (eaddr[5] << 8)); + GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_2L, eaddr[0] | (eaddr[1] << 8)); + GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_2M, eaddr[2] | (eaddr[3] << 8)); + GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_2H, eaddr[4] | (eaddr[5] << 8)); + + // Disable interrupts for counter overflows + GMAC_WRITE_2 (mSoftc, port, GM_TX_IRQ_MSK, 0); + GMAC_WRITE_2 (mSoftc, port, GM_RX_IRQ_MSK, 0); + GMAC_WRITE_2 (mSoftc, port, GM_TR_IRQ_MSK, 0); + + // Configure Rx MAC FIFO + CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_SET); + CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_CLR); + reg = GMF_OPER_ON | GMF_RX_F_FL_ON; + if (mSoftc->msk_hw_id == CHIP_ID_YUKON_FE_P || mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) { + reg |= GMF_RX_OVER_ON; + } + CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), reg); + + if (mSoftc->msk_hw_id == CHIP_ID_YUKON_XL) { + // Clear flush mask - HW bug + CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_FL_MSK), 0); + } else { + // Flush Rx MAC FIFO on any flow control or error + CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); + } + + // + // Set Rx FIFO flush threshold to 64 bytes + 1 FIFO word + // due to hardware hang on receipt of pause frames. + // + reg = RX_GMF_FL_THR_DEF + 1; + // Another magic for Yukon FE+ - From Linux + if (mSoftc->msk_hw_id == CHIP_ID_YUKON_FE_P && mSoftc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) { + reg = 0x178; + } + CSR_WRITE_2 (mSoftc, MR_ADDR (port, RX_GMF_FL_THR), reg); + + // Configure Tx MAC FIFO + CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_SET); + CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_CLR); + CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_OPER_ON); + + // Configure hardware VLAN tag insertion/stripping + msk_setvlan (sc_if); + + if ((sc_if->msk_flags & MSK_FLAG_RAMBUF) == 0) { + // Set Rx Pause threshould. + CSR_WRITE_2 (mSoftc, MR_ADDR (port, RX_GMF_LP_THR), MSK_ECU_LLPP); + CSR_WRITE_2 (mSoftc, MR_ADDR (port, RX_GMF_UP_THR), MSK_ECU_ULPP); + // Configure store-and-forward for Tx. + msk_set_tx_stfwd (sc_if); + } + + if (mSoftc->msk_hw_id == CHIP_ID_YUKON_FE_P && mSoftc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) { + // Disable dynamic watermark - from Linux + reg = CSR_READ_4 (mSoftc, MR_ADDR (port, TX_GMF_EA)); + reg &= ~0x03; + CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_EA), reg); + } + + // + // Disable Force Sync bit and Alloc bit in Tx RAM interface + // arbiter as we don't use Sync Tx queue. + // + CSR_WRITE_1 (mSoftc, MR_ADDR (port, TXA_CTRL), TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); + // Enable the RAM Interface Arbiter + CSR_WRITE_1 (mSoftc, MR_ADDR (port, TXA_CTRL), TXA_ENA_ARB); + + // Setup RAM buffer + msk_set_rambuffer (sc_if); + + // Disable Tx sync Queue + CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txsq, RB_CTRL), RB_RST_SET); + + // Setup Tx Queue Bus Memory Interface + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_CLR_RESET); + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_OPER_INIT); + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_FIFO_OP_ON); + CSR_WRITE_2 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_WM), MSK_BMU_TX_WM); + switch (mSoftc->msk_hw_id) { + case CHIP_ID_YUKON_EC_U: + if (mSoftc->msk_hw_rev == CHIP_REV_YU_EC_U_A0) { + // Fix for Yukon-EC Ultra: set BMU FIFO level + CSR_WRITE_2 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_AL), MSK_ECU_TXFF_LEV); + } + break; + case CHIP_ID_YUKON_EX: + // + // Yukon Extreme seems to have silicon bug for + // automatic Tx checksum calculation capability. + // + if (mSoftc->msk_hw_rev == CHIP_REV_YU_EX_B0) { + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_F), F_TX_CHK_AUTO_OFF); + } + break; + } + + // Setup Rx Queue Bus Memory Interface + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_CLR_RESET); + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_OPER_INIT); + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_FIFO_OP_ON); + CSR_WRITE_2 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_WM), MSK_BMU_RX_WM); + if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EC_U && mSoftc->msk_hw_rev >= CHIP_REV_YU_EC_U_A1) { + // MAC Rx RAM Read is controlled by hardware + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_F), F_M_RX_RAM_DIS); + } + + // truncate too-large frames - from linux + CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_TR_THR), 0x17a); + CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), RX_TRUNC_ON); + + msk_set_prefetch (sc_if->msk_txq, sc_if->msk_rdata.msk_tx_ring_paddr, MSK_TX_RING_CNT - 1); + msk_init_tx_ring (sc_if); + + // Disable Rx checksum offload and RSS hash + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_DIS_RX_CHKSUM | BMU_DIS_RX_RSS_HASH); + msk_set_prefetch (sc_if->msk_rxq, sc_if->msk_rdata.msk_rx_ring_paddr, MSK_RX_RING_CNT - 1); + Status = msk_init_rx_ring (sc_if); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_NET, "Initialization failed: no memory for Rx buffers\n")); + msk_stop (sc_if); + return Status; + } + + if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) { + // Disable flushing of non-ASF packets + CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RX_MACSEC_FLUSH_OFF); + } + + // Configure interrupt handling + if (port == MSK_PORT_A) { + mSoftc->msk_intrmask |= Y2_IS_PORT_A; + mSoftc->msk_intrhwemask |= Y2_HWE_L1_MASK; + } else { + mSoftc->msk_intrmask |= Y2_IS_PORT_B; + mSoftc->msk_intrhwemask |= Y2_HWE_L2_MASK; + } + // Configure IRQ moderation mask. + CSR_WRITE_4 (mSoftc, B2_IRQM_MSK, mSoftc->msk_intrmask); + if (mSoftc->msk_int_holdoff > 0) { + // Configure initial IRQ moderation timer value. + CSR_WRITE_4 (mSoftc, B2_IRQM_INI, MSK_USECS (mSoftc, mSoftc->msk_int_holdoff)); + CSR_WRITE_4 (mSoftc, B2_IRQM_VAL, MSK_USECS (mSoftc, mSoftc->msk_int_holdoff)); + // Start IRQ moderation. + CSR_WRITE_1 (mSoftc, B2_IRQM_CTRL, TIM_START); + } + CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, mSoftc->msk_intrhwemask); + CSR_READ_4 (mSoftc, B0_HWE_IMSK); + CSR_WRITE_4 (mSoftc, B0_IMSK, mSoftc->msk_intrmask); + CSR_READ_4 (mSoftc, B0_IMSK); + + sc_if->msk_flags &= ~MSK_FLAG_LINK; + e1000phy_mediachg (); + + return Status; +} + +STATIC +VOID +msk_set_rambuffer ( + struct msk_if_softc *sc_if + ) +{ + INTN ltpp, utpp; + INTN port = sc_if->msk_md.port; + + if ((sc_if->msk_flags & MSK_FLAG_RAMBUF) == 0) + return; + + // Setup Rx Queue + CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_RST_CLR); + CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_START), mSoftc->msk_rxqstart[port] / 8); + CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_END), mSoftc->msk_rxqend[port] / 8); + CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_WP), mSoftc->msk_rxqstart[port] / 8); + CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_RP), mSoftc->msk_rxqstart[port] / 8); + + utpp = (mSoftc->msk_rxqend[port] + 1 - mSoftc->msk_rxqstart[port] - MSK_RB_ULPP) / 8; + ltpp = (mSoftc->msk_rxqend[port] + 1 - mSoftc->msk_rxqstart[port] - MSK_RB_LLPP_B) / 8; + if (mSoftc->msk_rxqsize < MSK_MIN_RXQ_SIZE) { + ltpp += (MSK_RB_LLPP_B - MSK_RB_LLPP_S) / 8; + } + CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_RX_UTPP), utpp); + CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_RX_LTPP), ltpp); + // Set Rx priority (RB_RX_UTHP/RB_RX_LTHP) thresholds? + + CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_ENA_OP_MD); + CSR_READ_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL)); + + // Setup Tx Queue. + CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_CLR); + CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_START), mSoftc->msk_txqstart[port] / 8); + CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_END), mSoftc->msk_txqend[port] / 8); + CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_WP), mSoftc->msk_txqstart[port] / 8); + CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_RP), mSoftc->msk_txqstart[port] / 8); + + // Enable Store & Forward for Tx side + CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_ENA_STFWD); + CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_ENA_OP_MD); + CSR_READ_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL)); +} + +STATIC +VOID +msk_set_prefetch ( + INTN qaddr, + EFI_PHYSICAL_ADDRESS addr, + UINT32 count + ) +{ + // Reset the prefetch unit + CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET); + CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_CLR); + // Set LE base address + CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_ADDR_LOW_REG), MSK_ADDR_LO (addr)); + CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_ADDR_HI_REG), MSK_ADDR_HI (addr)); + + // Set the list last index + CSR_WRITE_2 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_LAST_IDX_REG), count); + // Turn on prefetch unit + CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_OP_ON); + // Dummy read to ensure write + CSR_READ_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG)); +} + +static +VOID +msk_stop ( + struct msk_if_softc *sc_if + ) +{ + struct msk_txdesc *txd; + struct msk_rxdesc *rxd; + UINT32 val; + INTN i; + INTN port = sc_if->msk_md.port; + + // Disable interrupts + if (port == MSK_PORT_A) { + mSoftc->msk_intrmask &= ~Y2_IS_PORT_A; + mSoftc->msk_intrhwemask &= ~Y2_HWE_L1_MASK; + } else { + mSoftc->msk_intrmask &= ~Y2_IS_PORT_B; + mSoftc->msk_intrhwemask &= ~Y2_HWE_L2_MASK; + } + CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, mSoftc->msk_intrhwemask); + CSR_READ_4 (mSoftc, B0_HWE_IMSK); + CSR_WRITE_4 (mSoftc, B0_IMSK, mSoftc->msk_intrmask); + CSR_READ_4 (mSoftc, B0_IMSK); + + // Disable Tx/Rx MAC. + val = GMAC_READ_2 (mSoftc, port, GM_GP_CTRL); + val &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); + GMAC_WRITE_2 (mSoftc, port, GM_GP_CTRL, val); + // Read again to ensure writing. + GMAC_READ_2 (mSoftc, port, GM_GP_CTRL); + // Update stats and clear counters + msk_stats_update (sc_if); + + // Stop Tx BMU + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_STOP); + val = CSR_READ_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR)); + for (i = 0; i < MSK_TIMEOUT; i++) { + if ((val & (BMU_STOP | BMU_IDLE)) == 0) { + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_STOP); + val = CSR_READ_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR)); + } else { + break; + } + MicroSecondDelay (1); + } + if (i == MSK_TIMEOUT) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Tx BMU stop failed\n")); + } + CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_SET | RB_DIS_OP_MD); + + // Disable all GMAC interrupt. + CSR_WRITE_1 (mSoftc, MR_ADDR (port, GMAC_IRQ_MSK), 0); + // Disable PHY interrupt. */ + msk_phy_writereg (port, PHY_MARV_INT_MASK, 0); + + // Disable the RAM Interface Arbiter. + CSR_WRITE_1 (mSoftc, MR_ADDR (port, TXA_CTRL), TXA_DIS_ARB); + + // Reset the PCI FIFO of the async Tx queue + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST); + + // Reset the Tx prefetch units + CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_txq, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET); + + // Reset the RAM Buffer async Tx queue + CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_SET); + + // Reset Tx MAC FIFO. + CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_SET); + // Set Pause Off. + CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_PAUSE_OFF); + + /* + * The Rx Stop command will not work for Yukon-2 if the BMU does not + * reach the end of packet and since we can't make sure that we have + * incoming data, we must reset the BMU while it is not during a DMA + * transfer. Since it is possible that the Rx path is still active, + * the Rx RAM buffer will be stopped first, so any possible incoming + * data will not trigger a DMA. After the RAM buffer is stopped, the + * BMU is polled until any DMA in progress is ended and only then it + * will be reset. + */ + + // Disable the RAM Buffer receive queue + CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_DIS_OP_MD); + for (i = 0; i < MSK_TIMEOUT; i++) { + if (CSR_READ_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, Q_RSL)) == CSR_READ_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, Q_RL))) { + break; + } + MicroSecondDelay (1); + } + if (i == MSK_TIMEOUT) { + DEBUG ((EFI_D_NET, "Marvell Yukon: Rx BMU stop failed\n")); + } + CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST); + // Reset the Rx prefetch unit. + CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET); + // Reset the RAM Buffer receive queue. + CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_RST_SET); + // Reset Rx MAC FIFO. + CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_SET); + + // Free Rx and Tx mbufs still in the queues + for (i = 0; i < MSK_RX_RING_CNT; i++) { + rxd = &sc_if->msk_cdata.msk_rxdesc[i]; + if (rxd->rx_m.Buf != NULL) { + mPciIo->Unmap (mPciIo, rxd->rx_m.DmaMapping); + if(rxd->rx_m.Buf != NULL) { + mPciIo->FreeBuffer (mPciIo, EFI_SIZE_TO_PAGES (rxd->rx_m.Length), rxd->rx_m.Buf); + rxd->rx_m.Buf = NULL; + } + ZeroMem (&(rxd->rx_m), sizeof (MSK_DMA_BUF)); + } + } + + for (i = 0; i < MSK_TX_RING_CNT; i++) { + txd = &sc_if->msk_cdata.msk_txdesc[i]; + if (txd->tx_m.Buf != NULL) { + mPciIo->Unmap (mPciIo, txd->tx_m.DmaMapping); + ZeroMem (&(txd->tx_m), sizeof (MSK_DMA_BUF)); + // We don't own the transmit buffers so don't free them + } + } + + /* + * Mark the interface down. + */ + sc_if->msk_flags &= ~MSK_FLAG_LINK; +} + +/* + * When GM_PAR_MIB_CLR bit of GM_PHY_ADDR is set, reading lower + * counter clears high 16 bits of the counter such that accessing + * lower 16 bits should be the last operation. + */ +#define MSK_READ_MIB32(x, y) (((UINT32)GMAC_READ_2 (mSoftc, x, (y) + 4)) << 16) + (UINT32)GMAC_READ_2 (mSoftc, x, y) +#define MSK_READ_MIB64(x, y) (((UINT64)MSK_READ_MIB32 (x, (y) + 8)) << 32) + (UINT64)MSK_READ_MIB32 (x, y) + +static +VOID +msk_stats_clear ( + struct msk_if_softc *sc_if + ) +{ + UINT16 gmac; + INTN val; + INTN i; + INTN port = sc_if->msk_md.port; + + // Set MIB Clear Counter Mode. + gmac = GMAC_READ_2 (mSoftc, port, GM_PHY_ADDR); + GMAC_WRITE_2 (mSoftc, port, GM_PHY_ADDR, gmac | GM_PAR_MIB_CLR); + // Read all MIB Counters with Clear Mode set + for (i = GM_RXF_UC_OK; i <= GM_TXE_FIFO_UR; i += sizeof (UINT32)) { + val = MSK_READ_MIB32 (port, i); + if (val); //Workaround: to prevent the GCC error: 'value computed is not used' + } + // Clear MIB Clear Counter Mode + gmac &= ~GM_PAR_MIB_CLR; + GMAC_WRITE_2 (mSoftc, port, GM_PHY_ADDR, gmac); +} + +static +VOID +msk_stats_update ( + struct msk_if_softc *sc_if + ) +{ + struct msk_hw_stats *stats; + UINT16 gmac; + INTN val; + INTN port = sc_if->msk_md.port; + + stats = &sc_if->msk_stats; + /* Set MIB Clear Counter Mode. */ + gmac = GMAC_READ_2 (mSoftc, port, GM_PHY_ADDR); + GMAC_WRITE_2 (mSoftc, port, GM_PHY_ADDR, gmac | GM_PAR_MIB_CLR); + + /* Rx stats. */ + stats->rx_ucast_frames += MSK_READ_MIB32 (port, GM_RXF_UC_OK); + stats->rx_bcast_frames += MSK_READ_MIB32 (port, GM_RXF_BC_OK); + stats->rx_pause_frames += MSK_READ_MIB32 (port, GM_RXF_MPAUSE); + stats->rx_mcast_frames += MSK_READ_MIB32 (port, GM_RXF_MC_OK); + stats->rx_crc_errs += MSK_READ_MIB32 (port, GM_RXF_FCS_ERR); + val = MSK_READ_MIB32 (port, GM_RXF_SPARE1); + stats->rx_good_octets += MSK_READ_MIB64 (port, GM_RXO_OK_LO); + stats->rx_bad_octets += MSK_READ_MIB64 (port, GM_RXO_ERR_LO); + stats->rx_runts += MSK_READ_MIB32 (port, GM_RXF_SHT); + stats->rx_runt_errs += MSK_READ_MIB32 (port, GM_RXE_FRAG); + stats->rx_pkts_64 += MSK_READ_MIB32 (port, GM_RXF_64B); + stats->rx_pkts_65_127 += MSK_READ_MIB32 (port, GM_RXF_127B); + stats->rx_pkts_128_255 += MSK_READ_MIB32 (port, GM_RXF_255B); + stats->rx_pkts_256_511 += MSK_READ_MIB32 (port, GM_RXF_511B); + stats->rx_pkts_512_1023 += MSK_READ_MIB32 (port, GM_RXF_1023B); + stats->rx_pkts_1024_1518 += MSK_READ_MIB32 (port, GM_RXF_1518B); + stats->rx_pkts_1519_max += MSK_READ_MIB32 (port, GM_RXF_MAX_SZ); + stats->rx_pkts_too_long += MSK_READ_MIB32 (port, GM_RXF_LNG_ERR); + stats->rx_pkts_jabbers += MSK_READ_MIB32 (port, GM_RXF_JAB_PKT); + val = MSK_READ_MIB32 (port, GM_RXF_SPARE2); + stats->rx_fifo_oflows += MSK_READ_MIB32 (port, GM_RXE_FIFO_OV); + val = MSK_READ_MIB32 (port, GM_RXF_SPARE3); + + /* Tx stats. */ + stats->tx_ucast_frames += MSK_READ_MIB32 (port, GM_TXF_UC_OK); + stats->tx_bcast_frames += MSK_READ_MIB32 (port, GM_TXF_BC_OK); + stats->tx_pause_frames += MSK_READ_MIB32 (port, GM_TXF_MPAUSE); + stats->tx_mcast_frames += MSK_READ_MIB32 (port, GM_TXF_MC_OK); + stats->tx_octets += MSK_READ_MIB64 (port, GM_TXO_OK_LO); + stats->tx_pkts_64 += MSK_READ_MIB32 (port, GM_TXF_64B); + stats->tx_pkts_65_127 += MSK_READ_MIB32 (port, GM_TXF_127B); + stats->tx_pkts_128_255 += MSK_READ_MIB32 (port, GM_TXF_255B); + stats->tx_pkts_256_511 += MSK_READ_MIB32 (port, GM_TXF_511B); + stats->tx_pkts_512_1023 += MSK_READ_MIB32 (port, GM_TXF_1023B); + stats->tx_pkts_1024_1518 += MSK_READ_MIB32 (port, GM_TXF_1518B); + stats->tx_pkts_1519_max += MSK_READ_MIB32 (port, GM_TXF_MAX_SZ); + val = MSK_READ_MIB32 (port, GM_TXF_SPARE1); + stats->tx_colls += MSK_READ_MIB32 (port, GM_TXF_COL); + stats->tx_late_colls += MSK_READ_MIB32 (port, GM_TXF_LAT_COL); + stats->tx_excess_colls += MSK_READ_MIB32 (port, GM_TXF_ABO_COL); + stats->tx_multi_colls += MSK_READ_MIB32 (port, GM_TXF_MUL_COL); + stats->tx_single_colls += MSK_READ_MIB32 (port, GM_TXF_SNG_COL); + stats->tx_underflows += MSK_READ_MIB32 (port, GM_TXE_FIFO_UR); + + if (val); //Workaround: to prevent the GCC error: 'value computed is not used' + + /* Clear MIB Clear Counter Mode. */ + gmac &= ~GM_PAR_MIB_CLR; + GMAC_WRITE_2 (mSoftc, port, GM_PHY_ADDR, gmac); +} + +#undef MSK_READ_MIB32 +#undef MSK_READ_MIB64 diff --git a/Drivers/Net/MarvellYukonDxe/if_msk.h b/Drivers/Net/MarvellYukonDxe/if_msk.h new file mode 100644 index 0000000..28ff046 --- /dev/null +++ b/Drivers/Net/MarvellYukonDxe/if_msk.h @@ -0,0 +1,52 @@ +/** <at> file +* API to ported msk driver +* +* Copyright (c) 2011-2016, ARM Limited. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#include <Uefi.h> + +//#define MAX_SUPPORTED_PACKET_SIZE 1500 +#define MAX_SUPPORTED_PACKET_SIZE EFI_PAGE_SIZE + +EFI_STATUS mskc_probe (EFI_PCI_IO_PROTOCOL *PciIo); + +EFI_STATUS mskc_attach (EFI_PCI_IO_PROTOCOL *PciIo, EFI_MAC_ADDRESS *Mac); +void mskc_detach (void); + +EFI_STATUS mskc_init (void); +void mskc_shutdown (void); + +void +mskc_rxfilter ( + IN UINT32 FilterFlags, + IN UINTN MCastFilterCnt, + IN EFI_MAC_ADDRESS *MCastFilter + ); + +EFI_STATUS +mskc_transmit ( + IN UINTN BufferSize, + IN VOID *Buffer + ); + +EFI_STATUS +mskc_receive ( + IN OUT UINTN *BufferSize, + OUT VOID *Buffer + ); + +void +mskc_getstatus ( + OUT UINT32 *InterruptStatus, OPTIONAL + OUT VOID **TxBuf OPTIONAL + ); diff --git a/Drivers/Net/MarvellYukonDxe/if_mskreg.h b/Drivers/Net/MarvellYukonDxe/if_mskreg.h new file mode 100644 index 0000000..a105919 --- /dev/null +++ b/Drivers/Net/MarvellYukonDxe/if_mskreg.h @@ -0,0 +1,2491 @@ +/** <at> file +* Defines and macros for the PCIe Marvell Yukon gigabit ethernet adapter product family +* +* Copyright (c) 2011-2016, ARM Limited. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ +/****************************************************************************** + * + * LICENSE: + * Copyright (C) Marvell International Ltd. and/or its affiliates + * + * The computer program files contained in this folder ("Files") + * are provided to you under the BSD-type license terms provided + * below, and any use of such Files and any derivative works + * thereof created by you shall be governed by the following terms + * and conditions: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * - Neither the name of Marvell nor the names of its contributors + * may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + * /LICENSE + * + ******************************************************************************/ + +/*- + * Copyright (c) 1997, 1998, 1999, 2000 + * Bill Paul <wpaul <at> ctr.columbia.edu>. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + */ + +/*- + * Copyright (c) 2003 Nathan L. Binkert <binkertn <at> umich.edu> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/*$FreeBSD: src/sys/dev/msk/if_mskreg.h,v 1.27.2.10.2.1 2010/06/14 02:09:06 kensmith Exp $*/ + +/* + * SysKonnect PCI vendor ID + */ +#define VENDORID_SK 0x1148 + +/* + * Marvell PCI vendor ID + */ +#define VENDORID_MARVELL 0x11AB + +/* + * D-Link PCI vendor ID + */ +#define VENDORID_DLINK 0x1186 + +/* + * SysKonnect ethernet device IDs + */ +#define DEVICEID_SK_YUKON2 0x9000 +#define DEVICEID_SK_YUKON2_EXPR 0x9e00 + +/* + * Marvell gigabit ethernet device IDs + */ +#define DEVICEID_MRVL_8021CU 0x4340 +#define DEVICEID_MRVL_8022CU 0x4341 +#define DEVICEID_MRVL_8061CU 0x4342 +#define DEVICEID_MRVL_8062CU 0x4343 +#define DEVICEID_MRVL_8021X 0x4344 +#define DEVICEID_MRVL_8022X 0x4345 +#define DEVICEID_MRVL_8061X 0x4346 +#define DEVICEID_MRVL_8062X 0x4347 +#define DEVICEID_MRVL_8035 0x4350 +#define DEVICEID_MRVL_8036 0x4351 +#define DEVICEID_MRVL_8038 0x4352 +#define DEVICEID_MRVL_8039 0x4353 +#define DEVICEID_MRVL_8040 0x4354 +#define DEVICEID_MRVL_8040T 0x4355 +#define DEVICEID_MRVL_8042 0x4357 +#define DEVICEID_MRVL_8048 0x435A +#define DEVICEID_MRVL_4360 0x4360 +#define DEVICEID_MRVL_4361 0x4361 +#define DEVICEID_MRVL_4362 0x4362 +#define DEVICEID_MRVL_4363 0x4363 +#define DEVICEID_MRVL_4364 0x4364 +#define DEVICEID_MRVL_4365 0x4365 +#define DEVICEID_MRVL_436A 0x436A +#define DEVICEID_MRVL_436B 0x436B +#define DEVICEID_MRVL_436C 0x436C +#define DEVICEID_MRVL_4380 0x4380 +#define DEVICEID_MRVL_4381 0x4381 + +/* + * D-Link gigabit ethernet device ID + */ +#define DEVICEID_DLINK_DGE550SX 0x4001 +#define DEVICEID_DLINK_DGE560SX 0x4002 +#define DEVICEID_DLINK_DGE560T 0x4b00 + +#define BIT_31 ((UINT32)1 << 31) +#define BIT_30 (1 << 30) +#define BIT_29 (1 << 29) +#define BIT_28 (1 << 28) +#define BIT_27 (1 << 27) +#define BIT_26 (1 << 26) +#define BIT_25 (1 << 25) +#define BIT_24 (1 << 24) +#define BIT_23 (1 << 23) +#define BIT_22 (1 << 22) +#define BIT_21 (1 << 21) +#define BIT_20 (1 << 20) +#define BIT_19 (1 << 19) +#define BIT_18 (1 << 18) +#define BIT_17 (1 << 17) +#define BIT_16 (1 << 16) +#define BIT_15 (1 << 15) +#define BIT_14 (1 << 14) +#define BIT_13 (1 << 13) +#define BIT_12 (1 << 12) +#define BIT_11 (1 << 11) +#define BIT_10 (1 << 10) +#define BIT_9 (1 << 9) +#define BIT_8 (1 << 8) +#define BIT_7 (1 << 7) +#define BIT_6 (1 << 6) +#define BIT_5 (1 << 5) +#define BIT_4 (1 << 4) +#define BIT_3 (1 << 3) +#define BIT_2 (1 << 2) +#define BIT_1 (1 << 1) +#define BIT_0 (1 << 0) + +#define SHIFT31(x) ((x) << 31) +#define SHIFT30(x) ((x) << 30) +#define SHIFT29(x) ((x) << 29) +#define SHIFT28(x) ((x) << 28) +#define SHIFT27(x) ((x) << 27) +#define SHIFT26(x) ((x) << 26) +#define SHIFT25(x) ((x) << 25) +#define SHIFT24(x) ((x) << 24) +#define SHIFT23(x) ((x) << 23) +#define SHIFT22(x) ((x) << 22) +#define SHIFT21(x) ((x) << 21) +#define SHIFT20(x) ((x) << 20) +#define SHIFT19(x) ((x) << 19) +#define SHIFT18(x) ((x) << 18) +#define SHIFT17(x) ((x) << 17) +#define SHIFT16(x) ((x) << 16) +#define SHIFT15(x) ((x) << 15) +#define SHIFT14(x) ((x) << 14) +#define SHIFT13(x) ((x) << 13) +#define SHIFT12(x) ((x) << 12) +#define SHIFT11(x) ((x) << 11) +#define SHIFT10(x) ((x) << 10) +#define SHIFT9(x) ((x) << 9) +#define SHIFT8(x) ((x) << 8) +#define SHIFT7(x) ((x) << 7) +#define SHIFT6(x) ((x) << 6) +#define SHIFT5(x) ((x) << 5) +#define SHIFT4(x) ((x) << 4) +#define SHIFT3(x) ((x) << 3) +#define SHIFT2(x) ((x) << 2) +#define SHIFT1(x) ((x) << 1) +#define SHIFT0(x) ((x) << 0) + +/* + * PCI Configuration Space header + */ +#define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */ +#define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */ +#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */ +#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */ +#define PCI_OUR_STATUS 0x7c /* 32 bit Adapter Status Register */ +#define PCI_OUR_REG_3 0x80 /* 32 bit Our Register 3 */ +#define PCI_OUR_REG_4 0x84 /* 32 bit Our Register 4 */ +#define PCI_OUR_REG_5 0x88 /* 32 bit Our Register 5 */ +#define PCI_CFG_REG_0 0x90 /* 32 bit Config Register 0 */ +#define PCI_CFG_REG_1 0x94 /* 32 bit Config Register 1 */ + +/* PCI Express Capability */ +#define PEX_CAP_ID 0xe0 /* 8 bit PEX Capability ID */ +#define PEX_NITEM 0xe1 /* 8 bit PEX Next Item Pointer */ +#define PEX_CAP_REG 0xe2 /* 16 bit PEX Capability Register */ +#define PEX_DEV_CAP 0xe4 /* 32 bit PEX Device Capabilities */ +#define PEX_DEV_CTRL 0xe8 /* 16 bit PEX Device Control */ +#define PEX_DEV_STAT 0xea /* 16 bit PEX Device Status */ +#define PEX_LNK_CAP 0xec /* 32 bit PEX Link Capabilities */ +#define PEX_LNK_CTRL 0xf0 /* 16 bit PEX Link Control */ +#define PEX_LNK_STAT 0xf2 /* 16 bit PEX Link Status */ + +/* PCI Express Extended Capabilities */ +#define PEX_ADV_ERR_REP 0x100 /* 32 bit PEX Advanced Error Reporting */ +#define PEX_UNC_ERR_STAT 0x104 /* 32 bit PEX Uncorr. Errors Status */ +#define PEX_UNC_ERR_MASK 0x108 /* 32 bit PEX Uncorr. Errors Mask */ +#define PEX_UNC_ERR_SEV 0x10c /* 32 bit PEX Uncorr. Errors Severity */ +#define PEX_COR_ERR_STAT 0x110 /* 32 bit PEX Correc. Errors Status */ +#define PEX_COR_ERR_MASK 0x114 /* 32 bit PEX Correc. Errors Mask */ +#define PEX_ADV_ERR_CAP_C 0x118 /* 32 bit PEX Advanced Error Cap./Ctrl */ +#define PEX_HEADER_LOG 0x11c /* 4x32 bit PEX Header Log Register */ + +/* PCI_OUR_REG_1 32 bit Our Register 1 */ +#define PCI_Y2_PIG_ENA BIT_31 /* Enable Plug-in-Go (YUKON-2) */ +#define PCI_Y2_DLL_DIS BIT_30 /* Disable PCI DLL (YUKON-2) */ +#define PCI_Y2_PHY2_COMA BIT_29 /* Set PHY 2 to Coma Mode (YUKON-2) */ +#define PCI_Y2_PHY1_COMA BIT_28 /* Set PHY 1 to Coma Mode (YUKON-2) */ +#define PCI_Y2_PHY2_POWD BIT_27 /* Set PHY 2 to Power Down (YUKON-2) */ +#define PCI_Y2_PHY1_POWD BIT_26 /* Set PHY 1 to Power Down (YUKON-2) */ +#define PCI_DIS_BOOT BIT_24 /* Disable BOOT via ROM */ +#define PCI_EN_IO BIT_23 /* Mapping to I/O space */ +#define PCI_EN_FPROM BIT_22 /* Enable FLASH mapping to memory */ +/* 1 = Map Flash to memory */ +/* 0 = Disable addr. dec */ +#define PCI_PAGESIZE (3L<<20)/* Bit 21..20: FLASH Page Size */ +#define PCI_PAGE_16 (0L<<20)/* 16 k pages */ +#define PCI_PAGE_32K (1L<<20)/* 32 k pages */ +#define PCI_PAGE_64K (2L<<20)/* 64 k pages */ +#define PCI_PAGE_128K (3L<<20)/* 128 k pages */ +#define PCI_PAGEREG (7L<<16)/* Bit 18..16: Page Register */ +#define PCI_PEX_LEGNAT BIT_15 /* PEX PM legacy/native mode (YUKON-2) */ +#define PCI_FORCE_BE BIT_14 /* Assert all BEs on MR */ +#define PCI_DIS_MRL BIT_13 /* Disable Mem Read Line */ +#define PCI_DIS_MRM BIT_12 /* Disable Mem Read Multiple */ +#define PCI_DIS_MWI BIT_11 /* Disable Mem Write & Invalidate */ +#define PCI_DISC_CLS BIT_10 /* Disc: cacheLsz bound */ +#define PCI_BURST_DIS BIT_9 /* Burst Disable */ +#define PCI_DIS_PCI_CLK BIT_8 /* Disable PCI clock driving */ +#define PCI_SKEW_DAS (0xfL<<4)/* Bit 7.. 4: Skew Ctrl, DAS Ext */ +#define PCI_SKEW_BASE 0xfL /* Bit 3.. 0: Skew Ctrl, Base */ +#define PCI_CLS_OPT BIT_3 /* Cache Line Size opt. PCI-X (YUKON-2) */ + +/* PCI_OUR_REG_2 32 bit Our Register 2 */ +#define PCI_VPD_WR_THR (0xff<<24) /* Bit 31..24: VPD Write Threshold */ +#define PCI_DEV_SEL (0x7f<<17) /* Bit 23..17: EEPROM Device Select */ +#define PCI_VPD_ROM_SZ (0x07<<14) /* Bit 16..14: VPD ROM Size */ +/* Bit 13..12: reserved */ +#define PCI_PATCH_DIR (0x0f<<8) /* Bit 11.. 8: Ext Patches dir 3..0 */ +#define PCI_PATCH_DIR_3 BIT_11 +#define PCI_PATCH_DIR_2 BIT_10 +#define PCI_PATCH_DIR_1 BIT_9 +#define PCI_PATCH_DIR_0 BIT_8 +#define PCI_EXT_PATCHS (0x0f<<4) /* Bit 7.. 4: Extended Patches 3..0 */ +#define PCI_EXT_PATCH_3 BIT_7 +#define PCI_EXT_PATCH_2 BIT_6 +#define PCI_EXT_PATCH_1 BIT_5 +#define PCI_EXT_PATCH_0 BIT_4 +#define PCI_EN_DUMMY_RD BIT_3 /* Enable Dummy Read */ +#define PCI_REV_DESC BIT_2 /* Reverse Desc. Bytes */ +#define PCI_USEDATA64 BIT_0 /* Use 64Bit Data bus ext */ + +/* PCI_OUR_STATUS 32 bit Adapter Status Register (Yukon-2) */ +#define PCI_OS_PCI64B BIT_31 /* Conventional PCI 64 bits Bus */ +#define PCI_OS_PCIX BIT_30 /* PCI-X Bus */ +#define PCI_OS_MODE_MSK (3<<28) /* Bit 29..28: PCI-X Bus Mode Mask */ +#define PCI_OS_PCI66M BIT_27 /* PCI 66 MHz Bus */ +#define PCI_OS_PCI_X BIT_26 /* PCI/PCI-X Bus (0 = PEX) */ +#define PCI_OS_DLLE_MSK (3<<24) /* Bit 25..24: DLL Status Indication */ +#define PCI_OS_DLLR_MSK (0x0f<<20) /* Bit 23..20: DLL Row Counters Values */ +#define PCI_OS_DLLC_MSK (0x0f<<16) /* Bit 19..16: DLL Col. Counters Values */ + +#define PCI_OS_SPEED(val) ((val & PCI_OS_MODE_MSK) >> 28) /* PCI-X Speed */ +/* possible values for the speed field of the register */ +#define PCI_OS_SPD_PCI 0 /* PCI Conventional Bus */ +#define PCI_OS_SPD_X66 1 /* PCI-X 66MHz Bus */ +#define PCI_OS_SPD_X100 2 /* PCI-X 100MHz Bus */ +#define PCI_OS_SPD_X133 3 /* PCI-X 133MHz Bus */ + +/* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */ +#define PCI_TIMER_VALUE_MSK (0xff<<16) /* Bit 23..16: Timer Value Mask */ +#define PCI_FORCE_ASPM_REQUEST BIT_15 /* Force ASPM Request (A1 only) */ +#define PCI_ASPM_GPHY_LINK_DOWN BIT_14 /* GPHY Link Down (A1 only) */ +#define PCI_ASPM_INT_FIFO_EMPTY BIT_13 /* Internal FIFO Empty (A1 only) */ +#define PCI_ASPM_CLKRUN_REQUEST BIT_12 /* CLKRUN Request (A1 only) */ +#define PCI_ASPM_FORCE_CLKREQ_ENA BIT_4 /* Force CLKREQ Enable (A1b only) */ +#define PCI_ASPM_CLKREQ_PAD_CTL BIT_3 /* CLKREQ PAD Control (A1 only) */ +#define PCI_ASPM_A1_MODE_SELECT BIT_2 /* A1 Mode Select (A1 only) */ +#define PCI_CLK_GATE_PEX_UNIT_ENA BIT_1 /* Enable Gate PEX Unit Clock */ +#define PCI_CLK_GATE_ROOT_COR_ENA BIT_0 /* Enable Gate Root Core Clock */ + +/* PCI_OUR_REG_5 32 bit Our Register 5 (Yukon-ECU only) */ +/* Bit 31..27: for A3 & later */ +#define PCI_CTL_DIV_CORE_CLK_ENA BIT_31 /* Divide Core Clock Enable */ +#define PCI_CTL_SRESET_VMAIN_AV BIT_30 /* Soft Reset for Vmain_av De-Glitch */ +#define PCI_CTL_BYPASS_VMAIN_AV BIT_29 /* Bypass En. for Vmain_av De-Glitch */ +#define PCI_CTL_TIM_VMAIN_AV1 BIT_28 /* Bit 28..27: Timer Vmain_av Mask */ +#define PCI_CTL_TIM_VMAIN_AV0 BIT_27 /* Bit 28..27: Timer Vmain_av Mask */ +#define PCI_CTL_TIM_VMAIN_AV_MSK (BIT_28 | BIT_27) +/* Bit 26..16: Release Clock on Event */ +#define PCI_REL_PCIE_RST_DE_ASS BIT_26 /* PCIe Reset De-Asserted */ +#define PCI_REL_GPHY_REC_PACKET BIT_25 /* GPHY Received Packet */ +#define PCI_REL_INT_FIFO_N_EMPTY BIT_24 /* Internal FIFO Not Empty */ +#define PCI_REL_MAIN_PWR_AVAIL BIT_23 /* Main Power Available */ +#define PCI_REL_CLKRUN_REQ_REL BIT_22 /* CLKRUN Request Release */ +#define PCI_REL_PCIE_RESET_ASS BIT_21 /* PCIe Reset Asserted */ +#define PCI_REL_PME_ASSERTED BIT_20 /* PME Asserted */ +#define PCI_REL_PCIE_EXIT_L1_ST BIT_19 /* PCIe Exit L1 State */ +#define PCI_REL_LOADER_NOT_FIN BIT_18 /* EPROM Loader Not Finished */ +#define PCI_REL_PCIE_RX_EX_IDLE BIT_17 /* PCIe Rx Exit Electrical Idle State */ +#define PCI_REL_GPHY_LINK_UP BIT_16 /* GPHY Link Up */ +/* Bit 10.. 0: Mask for Gate Clock */ +#define PCI_GAT_PCIE_RST_ASSERTED BIT_10 /* PCIe Reset Asserted */ +#define PCI_GAT_GPHY_N_REC_PACKET BIT_9 /* GPHY Not Received Packet */ +#define PCI_GAT_INT_FIFO_EMPTY BIT_8 /* Internal FIFO Empty */ +#define PCI_GAT_MAIN_PWR_N_AVAIL BIT_7 /* Main Power Not Available */ +#define PCI_GAT_CLKRUN_REQ_REL BIT_6 /* CLKRUN Not Requested */ +#define PCI_GAT_PCIE_RESET_ASS BIT_5 /* PCIe Reset Asserted */ +#define PCI_GAT_PME_DE_ASSERTED BIT_4 /* PME De-Asserted */ +#define PCI_GAT_PCIE_ENTER_L1_ST BIT_3 /* PCIe Enter L1 State */ +#define PCI_GAT_LOADER_FINISHED BIT_2 /* EPROM Loader Finished */ +#define PCI_GAT_PCIE_RX_EL_IDLE BIT_1 /* PCIe Rx Electrical Idle State */ +#define PCI_GAT_GPHY_LINK_DOWN BIT_0 /* GPHY Link Down */ + +/* PCI_CFG_REG_1 32 bit Config Register 1 */ +#define PCI_CF1_DIS_REL_EVT_RST BIT_24 /* Dis. Rel. Event during PCIE reset */ +/* Bit 23..21: Release Clock on Event */ +#define PCI_CF1_REL_LDR_NOT_FIN BIT_23 /* EEPROM Loader Not Finished */ +#define PCI_CF1_REL_VMAIN_AVLBL BIT_22 /* Vmain available */ +#define PCI_CF1_REL_PCIE_RESET BIT_21 /* PCI-E reset */ +/* Bit 20..18: Gate Clock on Event */ +#define PCI_CF1_GAT_LDR_NOT_FIN BIT_20 /* EEPROM Loader Finished */ +#define PCI_CF1_GAT_PCIE_RX_IDLE BIT_19 /* PCI-E Rx Electrical idle */ +#define PCI_CF1_GAT_PCIE_RESET BIT_18 /* PCI-E Reset */ +#define PCI_CF1_PRST_PHY_CLKREQ BIT_17 /* Enable PCI-E rst & PM2PHY gen. CLKREQ */ +#define PCI_CF1_PCIE_RST_CLKREQ BIT_16 /* Enable PCI-E rst generate CLKREQ */ + +#define PCI_CF1_ENA_CFG_LDR_DONE BIT_8 /* Enable core level Config loader done */ +#define PCI_CF1_ENA_TXBMU_RD_IDLE BIT_1 /* Enable TX BMU Read IDLE for ASPM */ +#define PCI_CF1_ENA_TXBMU_WR_IDLE BIT_0 /* Enable TX BMU Write IDLE for ASPM */ + +/* PEX_DEV_CTRL 16 bit PEX Device Control (Yukon-2) */ +#define PEX_DC_MAX_RRS_MSK (7<<12) /* Bit 14..12: Max. Read Request Size */ +#define PEX_DC_EN_NO_SNOOP BIT_11 /* Enable No Snoop */ +#define PEX_DC_EN_AUX_POW BIT_10 /* Enable AUX Power */ +#define PEX_DC_EN_PHANTOM BIT_9 /* Enable Phantom Functions */ +#define PEX_DC_EN_EXT_TAG BIT_8 /* Enable Extended Tag Field */ +#define PEX_DC_MAX_PLS_MSK (7<<5) /* Bit 7.. 5: Max. Payload Size Mask */ +#define PEX_DC_EN_REL_ORD BIT_4 /* Enable Relaxed Ordering */ +#define PEX_DC_EN_UNS_RQ_RP BIT_3 /* Enable Unsupported Request Reporting */ +#define PEX_DC_EN_FAT_ER_RP BIT_2 /* Enable Fatal Error Reporting */ +#define PEX_DC_EN_NFA_ER_RP BIT_1 /* Enable Non-Fatal Error Reporting */ +#define PEX_DC_EN_COR_ER_RP BIT_0 /* Enable Correctable Error Reporting */ + +#define PEX_DC_MAX_RD_RQ_SIZE(x) (SHIFT12(x) & PEX_DC_MAX_RRS_MSK) + +/* PEX_LNK_STAT 16 bit PEX Link Status (Yukon-2) */ +#define PEX_LS_SLOT_CLK_CFG BIT_12 /* Slot Clock Config */ +#define PEX_LS_LINK_TRAIN BIT_11 /* Link Training */ +#define PEX_LS_TRAIN_ERROR BIT_10 /* Training Error */ +#define PEX_LS_LINK_WI_MSK (0x3f<<4) /* Bit 9.. 4: Neg. Link Width Mask */ +#define PEX_LS_LINK_SP_MSK 0x0f /* Bit 3.. 0: Link Speed Mask */ + +/* PEX_UNC_ERR_STAT PEX Uncorrectable Errors Status Register (Yukon-2) */ +#define PEX_UNSUP_REQ BIT_20 /* Unsupported Request Error */ +#define PEX_MALFOR_TLP BIT_18 /* Malformed TLP */ +#define PEX_RX_OV BIT_17 /* Receiver Overflow (not supported) */ +#define PEX_UNEXP_COMP BIT_16 /* Unexpected Completion */ +#define PEX_COMP_TO BIT_14 /* Completion Timeout */ +#define PEX_FLOW_CTRL_P BIT_13 /* Flow Control Protocol Error */ +#define PEX_POIS_TLP BIT_12 /* Poisoned TLP */ +#define PEX_DATA_LINK_P BIT_4 /* Data Link Protocol Error */ + +#define PEX_FATAL_ERRORS (PEX_MALFOR_TLP | PEX_FLOW_CTRL_P | PEX_DATA_LINK_P) + +/* Control Register File (Address Map) */ + +/* + * Bank 0 + */ +#define B0_RAP 0x0000 /* 8 bit Register Address Port */ +#define B0_CTST 0x0004 /* 16 bit Control/Status register */ +#define B0_LED 0x0006 /* 8 Bit LED register */ +#define B0_POWER_CTRL 0x0007 /* 8 Bit Power Control reg (YUKON only) */ +#define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */ +#define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */ +#define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */ +#define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */ +#define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg 1 */ + +/* Special ISR registers (Yukon-2 only) */ +#define B0_Y2_SP_ISRC2 0x001c /* 32 bit Special Interrupt Source Reg 2 */ +#define B0_Y2_SP_ISRC3 0x0020 /* 32 bit Special Interrupt Source Reg 3 */ +#define B0_Y2_SP_EISR 0x0024 /* 32 bit Enter ISR Reg */ +#define B0_Y2_SP_LISR 0x0028 /* 32 bit Leave ISR Reg */ +#define B0_Y2_SP_ICR 0x002c /* 32 bit Interrupt Control Reg */ + +/* + * Bank 1 + * - completely empty (this is the RAP Block window) + * Note: if RAP = 1 this page is reserved + */ + +/* + * Bank 2 + */ +/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */ +#define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */ +#define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */ +#define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */ +#define B2_CONN_TYP 0x0118 /* 8 bit Connector type */ +#define B2_PMD_TYP 0x0119 /* 8 bit PMD type */ +#define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */ +#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */ +#define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */ +#define B2_Y2_CLK_GATE 0x011d /* 8 bit Clock Gating (Yukon-2) */ +#define B2_Y2_HW_RES 0x011e /* 8 bit HW Resources (Yukon-2) */ +#define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */ +#define B2_Y2_CLK_CTRL 0x0120 /* 32 bit Core Clock Frequency Control */ +#define B2_TI_INI 0x0130 /* 32 bit Timer Init Value */ +#define B2_TI_VAL 0x0134 /* 32 bit Timer Value */ +#define B2_TI_CTRL 0x0138 /* 8 bit Timer Control */ +#define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */ +#define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/ +#define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */ +#define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */ +#define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */ +#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */ +#define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */ +#define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */ +#define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */ +#define B2_GP_IO 0x015c /* 32 bit General Purpose I/O Register */ +#define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */ +#define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */ +#define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */ +#define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */ + +#define Y2_PEX_PHY_DATA 0x0170 /* 16 bit PEX PHY Data Register */ +#define Y2_PEX_PHY_ADDR 0x0172 /* 16 bit PEX PHY Address Register */ + +/* + * Bank 3 + */ +/* RAM Random Registers */ +#define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */ +#define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */ +#define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */ + +#define SELECT_RAM_BUFFER(rb, addr) (addr | (rb << 6)) /* Yukon-2 only */ + +/* RAM Interface Registers */ +/* Yukon-2: use SELECT_RAM_BUFFER() to access the RAM buffer */ +/* + * The HW-Spec. calls this registers Timeout Value 0..11. But this names are + * not usable in SW. Please notice these are NOT real timeouts, these are + * the number of qWords transferred continuously. + */ +#define B3_RI_WTO_R1 0x0190 /* 8 bit WR Timeout Queue R1 (TO0) */ +#define B3_RI_WTO_XA1 0x0191 /* 8 bit WR Timeout Queue XA1 (TO1) */ +#define B3_RI_WTO_XS1 0x0192 /* 8 bit WR Timeout Queue XS1 (TO2) */ +#define B3_RI_RTO_R1 0x0193 /* 8 bit RD Timeout Queue R1 (TO3) */ +#define B3_RI_RTO_XA1 0x0194 /* 8 bit RD Timeout Queue XA1 (TO4) */ +#define B3_RI_RTO_XS1 0x0195 /* 8 bit RD Timeout Queue XS1 (TO5) */ +#define B3_RI_WTO_R2 0x0196 /* 8 bit WR Timeout Queue R2 (TO6) */ +#define B3_RI_WTO_XA2 0x0197 /* 8 bit WR Timeout Queue XA2 (TO7) */ +#define B3_RI_WTO_XS2 0x0198 /* 8 bit WR Timeout Queue XS2 (TO8) */ +#define B3_RI_RTO_R2 0x0199 /* 8 bit RD Timeout Queue R2 (TO9) */ +#define B3_RI_RTO_XA2 0x019a /* 8 bit RD Timeout Queue XA2 (TO10)*/ +#define B3_RI_RTO_XS2 0x019b /* 8 bit RD Timeout Queue XS2 (TO11)*/ +#define B3_RI_TO_VAL 0x019c /* 8 bit Current Timeout Count Val */ +#define B3_RI_CTRL 0x01a0 /* 16 bit RAM Interface Control Register */ +#define B3_RI_TEST 0x01a2 /* 8 bit RAM Interface Test Register */ + +/* + * Bank 4 - 5 + */ +/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +#define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/ +#define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */ +#define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */ +#define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */ +#define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */ +#define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */ +#define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */ + +#define MR_ADDR(Mac, Offs) (((Mac) << 7) + (Offs)) + +/* RSS key registers for Yukon-2 Family */ +#define B4_RSS_KEY 0x0220 /* 4x32 bit RSS Key register (Yukon-2) */ +/* RSS key register offsets */ +#define KEY_IDX_0 0 /* offset for location of KEY 0 */ +#define KEY_IDX_1 4 /* offset for location of KEY 1 */ +#define KEY_IDX_2 8 /* offset for location of KEY 2 */ +#define KEY_IDX_3 12 /* offset for location of KEY 3 */ +/* 0x0280 - 0x0292: MAC 2 */ +#define RSS_KEY_ADDR(Port, KeyIndex) ((B4_RSS_KEY | ( ((Port) == 0) ? 0 : 0x80)) + (KeyIndex)) + +/* + * Bank 8 - 15 + */ +/* Receive and Transmit Queue Registers, use Q_ADDR() to access */ +#define B8_Q_REGS 0x0400 + +/* Queue Register Offsets, use Q_ADDR() to access */ +#define Q_D 0x00 /* 8*32 bit Current Descriptor */ +#define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low dWord */ +#define Q_DONE 0x24 /* 16 bit Done Index */ +#define Q_AC_L 0x28 /* 32 bit Current Address Counter Low dWord */ +#define Q_AC_H 0x2c /* 32 bit Current Address Counter High dWord */ +#define Q_BC 0x30 /* 32 bit Current Byte Counter */ +#define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */ +#define Q_F 0x38 /* 32 bit Flag Register */ +#define Q_T1 0x3c /* 32 bit Test Register 1 */ +#define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */ +#define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */ +#define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */ +#define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */ +#define Q_WM 0x40 /* 16 bit FIFO Watermark */ +#define Q_AL 0x42 /* 8 bit FIFO Alignment */ +#define Q_RSP 0x44 /* 16 bit FIFO Read Shadow Pointer */ +#define Q_RSL 0x46 /* 8 bit FIFO Read Shadow Level */ +#define Q_RP 0x48 /* 8 bit FIFO Read Pointer */ +#define Q_RL 0x4a /* 8 bit FIFO Read Level */ +#define Q_WP 0x4c /* 8 bit FIFO Write Pointer */ +#define Q_WSP 0x4d /* 8 bit FIFO Write Shadow Pointer */ +#define Q_WL 0x4e /* 8 bit FIFO Write Level */ +#define Q_WSL 0x4f /* 8 bit FIFO Write Shadow Level */ + +#define Q_ADDR(Queue, Offs) (B8_Q_REGS + (Queue) + (Offs)) + +/* Queue Prefetch Unit Offsets, use Y2_PREF_Q_ADDR() to address */ +#define Y2_B8_PREF_REGS 0x0450 + +#define PREF_UNIT_CTRL_REG 0x00 /* 32 bit Prefetch Control register */ +#define PREF_UNIT_LAST_IDX_REG 0x04 /* 16 bit Last Index */ +#define PREF_UNIT_ADDR_LOW_REG 0x08 /* 32 bit List start addr, low part */ +#define PREF_UNIT_ADDR_HI_REG 0x0c /* 32 bit List start addr, high part*/ +#define PREF_UNIT_GET_IDX_REG 0x10 /* 16 bit Get Index */ +#define PREF_UNIT_PUT_IDX_REG 0x14 /* 16 bit Put Index */ +#define PREF_UNIT_FIFO_WP_REG 0x20 /* 8 bit FIFO write pointer */ +#define PREF_UNIT_FIFO_RP_REG 0x24 /* 8 bit FIFO read pointer */ +#define PREF_UNIT_FIFO_WM_REG 0x28 /* 8 bit FIFO watermark */ +#define PREF_UNIT_FIFO_LEV_REG 0x2c /* 8 bit FIFO level */ + +#define PREF_UNIT_MASK_IDX 0x0fff + +#define Y2_PREF_Q_ADDR(Queue, Offs) (Y2_B8_PREF_REGS + (Queue) + (Offs)) + +/* + * Bank 16 - 23 + */ +/* RAM Buffer Registers */ +#define B16_RAM_REGS 0x0800 + +/* RAM Buffer Register Offsets, use RB_ADDR() to access */ +#define RB_START 0x00 /* 32 bit RAM Buffer Start Address */ +#define RB_END 0x04 /* 32 bit RAM Buffer End Address */ +#define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */ +#define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */ +#define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Packet */ +#define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Packet */ +#define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */ +#define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */ +#define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */ +#define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */ +#define RB_CTRL 0x28 /* 8 bit RAM Buffer Control Register */ +#define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */ +#define RB_TST2 0x2a /* 8 bit RAM Buffer Test Register 2 */ + +/* + * Bank 24 + */ +/* Receive GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */ +#define RX_GMF_EA 0x0c40 /* 32 bit Rx GMAC FIFO End Address */ +#define RX_GMF_AF_THR 0x0c44 /* 32 bit Rx GMAC FIFO Almost Full Thresh. */ +#define RX_GMF_CTRL_T 0x0c48 /* 32 bit Rx GMAC FIFO Control/Test */ +#define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */ +#define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */ +#define RX_GMF_TR_THR 0x0c54 /* 32 bit Rx Truncation Threshold (Yukon-2) */ +#define RX_GMF_UP_THR 0x0c58 /* 16 bit Rx Upper Pause Thr (Yukon-EC_U) */ +#define RX_GMF_LP_THR 0x0c5a /* 16 bit Rx Lower Pause Thr (Yukon-EC_U) */ +#define RX_GMF_VLAN 0x0c5c /* 32 bit Rx VLAN Type Register (Yukon-2) */ +#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */ +#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */ +#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */ +#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */ + +/* + * Bank 25 + */ +/* 0x0c80 - 0x0cbf: MAC 2 */ +/* 0x0cc0 - 0x0cff: reserved */ + +/* + * Bank 26 + */ +/* Transmit GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */ +#define TX_GMF_EA 0x0d40 /* 32 bit Tx GMAC FIFO End Address */ +#define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ +#define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */ +#define TX_GMF_VLAN 0x0d5c /* 32 bit Tx VLAN Type Register (Yukon-2) */ +#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */ +#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Pointer */ +#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */ +#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */ +#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */ +#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */ + +/* + * Bank 27 + */ +/* 0x0d80 - 0x0dbf: MAC 2 */ +/* 0x0daa - 0x0dff: reserved */ + +/* + * Bank 28 + */ +/* Descriptor Poll Timer Registers */ +#define B28_DPT_INI 0x0e00 /* 24 bit Descriptor Poll Timer Init Val */ +#define B28_DPT_VAL 0x0e04 /* 24 bit Descriptor Poll Timer Curr Val */ +#define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg */ +#define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg */ +/* Time Stamp Timer Registers (YUKON only) */ +#define GMAC_TI_ST_VAL 0x0e14 /* 32 bit Time Stamp Timer Curr Val */ +#define GMAC_TI_ST_CTRL 0x0e18 /* 8 bit Time Stamp Timer Ctrl Reg */ +#define GMAC_TI_ST_TST 0x0e1a /* 8 bit Time Stamp Timer Test Reg */ +/* Polling Unit Registers (Yukon-2 only) */ +#define POLL_CTRL 0x0e20 /* 32 bit Polling Unit Control Reg */ +#define POLL_LAST_IDX 0x0e24 /* 16 bit Polling Unit List Last Index */ +#define POLL_LIST_ADDR_LO 0x0e28 /* 32 bit Poll. List Start Addr (low) */ +#define POLL_LIST_ADDR_HI 0x0e2c /* 32 bit Poll. List Start Addr (high) */ +/* ASF Subsystem Registers (Yukon-2 only) */ +#define B28_Y2_SMB_CONFIG 0x0e40 /* 32 bit ASF SMBus Config Register */ +#define B28_Y2_SMB_CSD_REG 0x0e44 /* 32 bit ASF SMB Control/Status/Data */ +#define B28_Y2_ASF_IRQ_V_BASE 0x0e60 /* 32 bit ASF IRQ Vector Base */ +#define B28_Y2_ASF_STAT_CMD 0x0e68 /* 32 bit ASF Status and Command Reg */ +#define B28_Y2_ASF_HCU_CCSR 0x0e68 /* 32 bit ASF HCU CCSR (Yukon EX) */ +#define B28_Y2_ASF_HOST_COM 0x0e6c /* 32 bit ASF Host Communication Reg */ +#define B28_Y2_DATA_REG_1 0x0e70 /* 32 bit ASF/Host Data Register 1 */ +#define B28_Y2_DATA_REG_2 0x0e74 /* 32 bit ASF/Host Data Register 2 */ +#define B28_Y2_DATA_REG_3 0x0e78 /* 32 bit ASF/Host Data Register 3 */ +#define B28_Y2_DATA_REG_4 0x0e7c /* 32 bit ASF/Host Data Register 4 */ + +/* + * Bank 29 + */ + +/* Status BMU Registers (Yukon-2 only)*/ +#define STAT_CTRL 0x0e80 /* 32 bit Status BMU Control Reg */ +#define STAT_LAST_IDX 0x0e84 /* 16 bit Status BMU Last Index */ +#define STAT_LIST_ADDR_LO 0x0e88 /* 32 bit Status List Start Addr (low) */ +#define STAT_LIST_ADDR_HI 0x0e8c /* 32 bit Status List Start Addr (high) */ +#define STAT_TXA1_RIDX 0x0e90 /* 16 bit Status TxA1 Report Index Reg */ +#define STAT_TXS1_RIDX 0x0e92 /* 16 bit Status TxS1 Report Index Reg */ +#define STAT_TXA2_RIDX 0x0e94 /* 16 bit Status TxA2 Report Index Reg */ +#define STAT_TXS2_RIDX 0x0e96 /* 16 bit Status TxS2 Report Index Reg */ +#define STAT_TX_IDX_TH 0x0e98 /* 16 bit Status Tx Index Threshold Reg */ +#define STAT_PUT_IDX 0x0e9c /* 16 bit Status Put Index Reg */ +/* FIFO Control/Status Registers (Yukon-2 only)*/ +#define STAT_FIFO_WP 0x0ea0 /* 8 bit Status FIFO Write Pointer Reg */ +#define STAT_FIFO_RP 0x0ea4 /* 8 bit Status FIFO Read Pointer Reg */ +#define STAT_FIFO_RSP 0x0ea6 /* 8 bit Status FIFO Read Shadow Ptr */ +#define STAT_FIFO_LEVEL 0x0ea8 /* 8 bit Status FIFO Level Reg */ +#define STAT_FIFO_SHLVL 0x0eaa /* 8 bit Status FIFO Shadow Level Reg */ +#define STAT_FIFO_WM 0x0eac /* 8 bit Status FIFO Watermark Reg */ +#define STAT_FIFO_ISR_WM 0x0ead /* 8 bit Status FIFO ISR Watermark Reg */ +/* Level and ISR Timer Registers (Yukon-2 only)*/ +#define STAT_LEV_TIMER_INI 0x0eb0 /* 32 bit Level Timer Init. Value Reg */ +#define STAT_LEV_TIMER_CNT 0x0eb4 /* 32 bit Level Timer Counter Reg */ +#define STAT_LEV_TIMER_CTRL 0x0eb8 /* 8 bit Level Timer Control Reg */ +#define STAT_LEV_TIMER_TEST 0x0eb9 /* 8 bit Level Timer Test Reg */ +#define STAT_TX_TIMER_INI 0x0ec0 /* 32 bit Tx Timer Init. Value Reg */ +#define STAT_TX_TIMER_CNT 0x0ec4 /* 32 bit Tx Timer Counter Reg */ +#define STAT_TX_TIMER_CTRL 0x0ec8 /* 8 bit Tx Timer Control Reg */ +#define STAT_TX_TIMER_TEST 0x0ec9 /* 8 bit Tx Timer Test Reg */ +#define STAT_ISR_TIMER_INI 0x0ed0 /* 32 bit ISR Timer Init. Value Reg */ +#define STAT_ISR_TIMER_CNT 0x0ed4 /* 32 bit ISR Timer Counter Reg */ +#define STAT_ISR_TIMER_CTRL 0x0ed8 /* 8 bit ISR Timer Control Reg */ +#define STAT_ISR_TIMER_TEST 0x0ed9 /* 8 bit ISR Timer Test Reg */ + +#define ST_LAST_IDX_MASK 0x007f /* Last Index Mask */ +#define ST_TXRP_IDX_MASK 0x0fff /* Tx Report Index Mask */ +#define ST_TXTH_IDX_MASK 0x0fff /* Tx Threshold Index Mask */ +#define ST_WM_IDX_MASK 0x3f /* FIFO Watermark Index Mask */ + +/* + * Bank 30 + */ +/* GMAC and GPHY Control Registers (YUKON only) */ +#define GMAC_CTRL 0x0f00 /* 32 bit GMAC Control Reg */ +#define GPHY_CTRL 0x0f04 /* 32 bit GPHY Control Reg */ +#define GMAC_IRQ_SRC 0x0f08 /* 8 bit GMAC Interrupt Source Reg */ +#define GMAC_IRQ_MSK 0x0f0c /* 8 bit GMAC Interrupt Mask Reg */ +#define GMAC_LINK_CTRL 0x0f10 /* 16 bit Link Control Reg */ + +/* Wake-up Frame Pattern Match Control Registers (YUKON only) */ + +#define WOL_REG_OFFS 0x20 /* HW-Bug: Address is + 0x20 against spec. */ + +#define WOL_CTRL_STAT 0x0f20 /* 16 bit WOL Control/Status Reg */ +#define WOL_MATCH_CTL 0x0f22 /* 8 bit WOL Match Control Reg */ +#define WOL_MATCH_RES 0x0f23 /* 8 bit WOL Match Result Reg */ +#define WOL_MAC_ADDR_LO 0x0f24 /* 32 bit WOL MAC Address Low */ +#define WOL_MAC_ADDR_HI 0x0f28 /* 16 bit WOL MAC Address High */ +#define WOL_PATT_PME 0x0f2a /* 8 bit WOL PME Match Enable (Yukon-2) */ +#define WOL_PATT_ASFM 0x0f2b /* 8 bit WOL ASF Match Enable (Yukon-2) */ +#define WOL_PATT_RPTR 0x0f2c /* 8 bit WOL Pattern Read Pointer */ + +/* WOL Pattern Length Registers (YUKON only) */ + +#define WOL_PATT_LEN_LO 0x0f30 /* 32 bit WOL Pattern Length 3..0 */ +#define WOL_PATT_LEN_HI 0x0f34 /* 24 bit WOL Pattern Length 6..4 */ + +/* WOL Pattern Counter Registers (YUKON only) */ + +#define WOL_PATT_CNT_0 0x0f38 /* 32 bit WOL Pattern Counter 3..0 */ +#define WOL_PATT_CNT_4 0x0f3c /* 24 bit WOL Pattern Counter 6..4 */ + +/* + * Bank 32 - 33 + */ +#define WOL_PATT_RAM_1 0x1000 /* WOL Pattern RAM Link 1 */ +#define WOL_PATT_RAM_2 0x1400 /* WOL Pattern RAM Link 2 */ + +/* offset to configuration space on Yukon-2 */ +#define Y2_CFG_SPC 0x1c00 +#define BASE_GMAC_1 0x2800 /* GMAC 1 registers */ +#define BASE_GMAC_2 0x3800 /* GMAC 2 registers */ + +/* + * Control Register Bit Definitions: + */ +/* B0_CTST 24 bit Control/Status register */ +#define Y2_VMAIN_AVAIL BIT_17 /* VMAIN available (YUKON-2 only) */ +#define Y2_VAUX_AVAIL BIT_16 /* VAUX available (YUKON-2 only) */ +#define Y2_HW_WOL_ON BIT_15 /* HW WOL On (Yukon-EC Ultra A1 only) */ +#define Y2_HW_WOL_OFF BIT_14 /* HW WOL Off (Yukon-EC Ultra A1 only) */ +#define Y2_ASF_ENABLE BIT_13 /* ASF Unit Enable (YUKON-2 only) */ +#define Y2_ASF_DISABLE BIT_12 /* ASF Unit Disable (YUKON-2 only) */ +#define Y2_CLK_RUN_ENA BIT_11 /* CLK_RUN Enable (YUKON-2 only) */ +#define Y2_CLK_RUN_DIS BIT_10 /* CLK_RUN Disable (YUKON-2 only) */ +#define Y2_LED_STAT_ON BIT_9 /* Status LED On (YUKON-2 only) */ +#define Y2_LED_STAT_OFF BIT_8 /* Status LED Off (YUKON-2 only) */ +#define CS_ST_SW_IRQ BIT_7 /* Set IRQ SW Request */ +#define CS_CL_SW_IRQ BIT_6 /* Clear IRQ SW Request */ +#define CS_STOP_DONE BIT_5 /* Stop Master is finished */ +#define CS_STOP_MAST BIT_4 /* Command Bit to stop the master */ +#define CS_MRST_CLR BIT_3 /* Clear Master Reset */ +#define CS_MRST_SET BIT_2 /* Set Master Reset */ +#define CS_RST_CLR BIT_1 /* Clear Software Reset */ +#define CS_RST_SET BIT_0 /* Set Software Reset */ +#define Y_ULTRA_2_PLUG_IN_GO_EN BIT_15 + +#define LED_STAT_ON BIT_1 /* Status LED On */ +#define LED_STAT_OFF BIT_0 /* Status LED Off */ + +/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */ +#define PC_VAUX_ENA BIT_7 /* Switch VAUX Enable */ +#define PC_VAUX_DIS BIT_6 /* Switch VAUX Disable */ +#define PC_VCC_ENA BIT_5 /* Switch VCC Enable */ +#define PC_VCC_DIS BIT_4 /* Switch VCC Disable */ +#define PC_VAUX_ON BIT_3 /* Switch VAUX On */ +#define PC_VAUX_OFF BIT_2 /* Switch VAUX Off */ +#define PC_VCC_ON BIT_1 /* Switch VCC On */ +#define PC_VCC_OFF BIT_0 /* Switch VCC Off */ + +/* B0_ISRC 32 bit Interrupt Source Register */ +/* B0_IMSK 32 bit Interrupt Mask Register */ +/* B0_SP_ISRC 32 bit Special Interrupt Source Reg */ +/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ +/* B0_Y2_SP_ISRC2 32 bit Special Interrupt Source Reg 2 */ +/* B0_Y2_SP_ISRC3 32 bit Special Interrupt Source Reg 3 */ +/* B0_Y2_SP_EISR 32 bit Enter ISR Reg */ +/* B0_Y2_SP_LISR 32 bit Leave ISR Reg */ +#define Y2_IS_PORT_MASK(Port, Mask) ((Mask) << (Port*8)) +#define Y2_IS_HW_ERR BIT_31 /* Interrupt HW Error */ +#define Y2_IS_STAT_BMU BIT_30 /* Status BMU Interrupt */ +#define Y2_IS_ASF BIT_29 /* ASF subsystem Interrupt */ +#define Y2_IS_POLL_CHK BIT_27 /* Check IRQ from polling unit */ +#define Y2_IS_TWSI_RDY BIT_26 /* IRQ on end of TWSI Tx */ +#define Y2_IS_IRQ_SW BIT_25 /* SW forced IRQ */ +#define Y2_IS_TIMINT BIT_24 /* IRQ from Timer */ +#define Y2_IS_IRQ_PHY2 BIT_12 /* Interrupt from PHY 2 */ +#define Y2_IS_IRQ_MAC2 BIT_11 /* Interrupt from MAC 2 */ +#define Y2_IS_CHK_RX2 BIT_10 /* Descriptor error Rx 2 */ +#define Y2_IS_CHK_TXS2 BIT_9 /* Descriptor error TXS 2 */ +#define Y2_IS_CHK_TXA2 BIT_8 /* Descriptor error TXA 2 */ +#define Y2_IS_PSM_ACK BIT_7 /* PSM Ack (Yukon Optima) */ +#define Y2_IS_PTP_TIST BIT_6 /* PTP TIme Stamp (Yukon Optima) */ +#define Y2_IS_PHY_QLNK BIT_5 /* PHY Quick Link (Yukon Optima) */ +#define Y2_IS_IRQ_PHY1 BIT_4 /* Interrupt from PHY 1 */ +#define Y2_IS_IRQ_MAC1 BIT_3 /* Interrupt from MAC 1 */ +#define Y2_IS_CHK_RX1 BIT_2 /* Descriptor error Rx 1 */ +#define Y2_IS_CHK_TXS1 BIT_1 /* Descriptor error TXS 1 */ +#define Y2_IS_CHK_TXA1 BIT_0 /* Descriptor error TXA 1 */ + +#define Y2_IS_L1_MASK 0x0000001f /* IRQ Mask for port 1 */ + +#define Y2_IS_L2_MASK 0x00001f00 /* IRQ Mask for port 2 */ + +#define Y2_IS_ALL_MSK 0xef001f1f /* All Interrupt bits */ + +#define Y2_IS_PORT_A (Y2_IS_IRQ_PHY1 | Y2_IS_IRQ_MAC1 | Y2_IS_CHK_TXA1 | Y2_IS_CHK_RX1) +#define Y2_IS_PORT_B (Y2_IS_IRQ_PHY2 | Y2_IS_IRQ_MAC2 | Y2_IS_CHK_TXA2 | Y2_IS_CHK_RX2) + +/* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */ +/* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */ +/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ +#define Y2_IS_TIST_OV BIT_29 /* Time Stamp Timer overflow interrupt */ +#define Y2_IS_SENSOR BIT_28 /* Sensor interrupt */ +#define Y2_IS_MST_ERR BIT_27 /* Master error interrupt */ +#define Y2_IS_IRQ_STAT BIT_26 /* Status exception interrupt */ +#define Y2_IS_PCI_EXP BIT_25 /* PCI-Express interrupt */ +#define Y2_IS_PCI_NEXP BIT_24 /* PCI-Express error similar to PCI error */ +#define Y2_IS_PAR_RD2 BIT_13 /* Read RAM parity error interrupt */ +#define Y2_IS_PAR_WR2 BIT_12 /* Write RAM parity error interrupt */ +#define Y2_IS_PAR_MAC2 BIT_11 /* MAC hardware fault interrupt */ +#define Y2_IS_PAR_RX2 BIT_10 /* Parity Error Rx Queue 2 */ +#define Y2_IS_TCP_TXS2 BIT_9 /* TCP length mismatch sync Tx queue IRQ */ +#define Y2_IS_TCP_TXA2 BIT_8 /* TCP length mismatch async Tx queue IRQ */ +#define Y2_IS_PAR_RD1 BIT_5 /* Read RAM parity error interrupt */ +#define Y2_IS_PAR_WR1 BIT_4 /* Write RAM parity error interrupt */ +#define Y2_IS_PAR_MAC1 BIT_3 /* MAC hardware fault interrupt */ +#define Y2_IS_PAR_RX1 BIT_2 /* Parity Error Rx Queue 1 */ +#define Y2_IS_TCP_TXS1 BIT_1 /* TCP length mismatch sync Tx queue IRQ */ +#define Y2_IS_TCP_TXA1 BIT_0 /* TCP length mismatch async Tx queue IRQ */ + +#define Y2_HWE_L1_MASK (Y2_IS_PAR_RD1 | Y2_IS_PAR_WR1 | Y2_IS_PAR_MAC1 | Y2_IS_PAR_RX1 | Y2_IS_TCP_TXS1| Y2_IS_TCP_TXA1) +#define Y2_HWE_L2_MASK (Y2_IS_PAR_RD2 | Y2_IS_PAR_WR2 | Y2_IS_PAR_MAC2 | Y2_IS_PAR_RX2 | Y2_IS_TCP_TXS2| Y2_IS_TCP_TXA2) + +#define Y2_HWE_ALL_MSK (Y2_IS_TIST_OV | /* Y2_IS_SENSOR | */ Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | \ + Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP | Y2_HWE_L1_MASK | Y2_HWE_L2_MASK) + +/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */ +#define CFG_CHIP_R_MSK (0x0f<<4) /* Bit 7.. 4: Chip Revision */ +#define CFG_DIS_M2_CLK BIT_1 /* Disable Clock for 2nd MAC */ +#define CFG_SNG_MAC BIT_0 /* MAC Config: 0 = 2 MACs; 1 = 1 MAC */ + +/* B2_CHIP_ID 8 bit Chip Identification Number */ +#define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */ +#define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */ +#define CHIP_ID_YUKON_LITE 0xb1 /* Chip ID for YUKON-Lite (Rev. A1-A3) */ +#define CHIP_ID_YUKON_LP 0xb2 /* Chip ID for YUKON-LP */ +#define CHIP_ID_YUKON_XL 0xb3 /* Chip ID for YUKON-2 XL */ +#define CHIP_ID_YUKON_EC_U 0xb4 /* Chip ID for YUKON-2 EC Ultra */ +#define CHIP_ID_YUKON_EX 0xb5 /* Chip ID for YUKON-2 Extreme */ +#define CHIP_ID_YUKON_EC 0xb6 /* Chip ID for YUKON-2 EC */ +#define CHIP_ID_YUKON_FE 0xb7 /* Chip ID for YUKON-2 FE */ +#define CHIP_ID_YUKON_FE_P 0xb8 /* Chip ID for YUKON-2 FE+ */ +#define CHIP_ID_YUKON_SUPR 0xb9 /* Chip ID for YUKON-2 Supreme */ +#define CHIP_ID_YUKON_UL_2 0xba /* Chip ID for YUKON-2 Ultra 2 */ +#define CHIP_ID_YUKON_UNKNOWN 0xbb +#define CHIP_ID_YUKON_OPT 0xbc /* Chip ID for YUKON-2 Optima */ + +#define CHIP_REV_YU_XL_A0 0 /* Chip Rev. for Yukon-2 A0 */ +#define CHIP_REV_YU_XL_A1 1 /* Chip Rev. for Yukon-2 A1 */ +#define CHIP_REV_YU_XL_A2 2 /* Chip Rev. for Yukon-2 A2 */ +#define CHIP_REV_YU_XL_A3 3 /* Chip Rev. for Yukon-2 A3 */ + +#define CHIP_REV_YU_EC_A1 0 /* Chip Rev. for Yukon-EC A1/A0 */ +#define CHIP_REV_YU_EC_A2 1 /* Chip Rev. for Yukon-EC A2 */ +#define CHIP_REV_YU_EC_A3 2 /* Chip Rev. for Yukon-EC A3 */ + +#define CHIP_REV_YU_EC_U_A0 1 +#define CHIP_REV_YU_EC_U_A1 2 + +#define CHIP_REV_YU_FE_P_A0 0 /* Chip Rev. for Yukon-2 FE+ A0 */ + +#define CHIP_REV_YU_EX_A0 1 /* Chip Rev. for Yukon-2 EX A0 */ +#define CHIP_REV_YU_EX_B0 2 /* Chip Rev. for Yukon-2 EX B0 */ + +/* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */ +#define Y2_STATUS_LNK2_INAC BIT_7 /* Status Link 2 inactiv (0 = activ) */ +#define Y2_CLK_GAT_LNK2_DIS BIT_6 /* Disable clock gating Link 2 */ +#define Y2_COR_CLK_LNK2_DIS BIT_5 /* Disable Core clock Link 2 */ +#define Y2_PCI_CLK_LNK2_DIS BIT_4 /* Disable PCI clock Link 2 */ +#define Y2_STATUS_LNK1_INAC BIT_3 /* Status Link 1 inactiv (0 = activ) */ +#define Y2_CLK_GAT_LNK1_DIS BIT_2 /* Disable clock gating Link 1 */ +#define Y2_COR_CLK_LNK1_DIS BIT_1 /* Disable Core clock Link 1 */ +#define Y2_PCI_CLK_LNK1_DIS BIT_0 /* Disable PCI clock Link 1 */ + +/* B2_Y2_HW_RES 8 bit HW Resources (Yukon-2 only) */ +#define CFG_LED_MODE_MSK (0x07<<2) /* Bit 4.. 2: LED Mode Mask */ +#define CFG_LINK_2_AVAIL BIT_1 /* Link 2 available */ +#define CFG_LINK_1_AVAIL BIT_0 /* Link 1 available */ + +#define CFG_LED_MODE(x) (((x) & CFG_LED_MODE_MSK) >> 2) +#define CFG_DUAL_MAC_MSK (CFG_LINK_2_AVAIL | CFG_LINK_1_AVAIL) + +/* B2_E_3 8 bit lower 4 bits used for HW self test result */ +#define B2_E3_RES_MASK 0x0f + +/* B2_Y2_CLK_CTRL 32 bit Core Clock Frequency Control Register (Yukon-2/EC) */ +/* Yukon-EC/FE */ +#define Y2_CLK_DIV_VAL_MSK (0xff<<16) /* Bit 23..16: Clock Divisor Value */ +#define Y2_CLK_DIV_VAL(x) (SHIFT16(x) & Y2_CLK_DIV_VAL_MSK) +/* Yukon-2 */ +#define Y2_CLK_DIV_VAL2_MSK (0x07<<21) /* Bit 23..21: Clock Divisor Value */ +#define Y2_CLK_SELECT2_MSK (0x1f<<16) /* Bit 20..16: Clock Select */ +#define Y2_CLK_DIV_VAL_2(x) (SHIFT21 (x) & Y2_CLK_DIV_VAL2_MSK) +#define Y2_CLK_SEL_VAL_2(x) (SHIFT16 (x) & Y2_CLK_SELECT2_MSK) +#define Y2_CLK_DIV_ENA BIT_1 /* Enable Core Clock Division */ +#define Y2_CLK_DIV_DIS BIT_0 /* Disable Core Clock Division */ + +/* B2_TI_CTRL 8 bit Timer control */ +/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ +#define TIM_START BIT_2 /* Start Timer */ +#define TIM_STOP BIT_1 /* Stop Timer */ +#define TIM_CLR_IRQ BIT_0 /* Clear Timer IRQ (!IRQM) */ + +/* B2_TI_TEST 8 Bit Timer Test */ +/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */ +/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */ +#define TIM_T_ON BIT_2 /* Test mode on */ +#define TIM_T_OFF BIT_1 /* Test mode off */ +#define TIM_T_STEP BIT_0 /* Test step */ + +/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */ +/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */ +#define DPT_MSK 0x00ffffff /* Bit 23.. 0: Desc Poll Timer Bits */ + +/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ +#define DPT_START BIT_1 /* Start Descriptor Poll Timer */ +#define DPT_STOP BIT_0 /* Stop Descriptor Poll Timer */ + +/* B2_TST_CTRL1 8 bit Test Control Register 1 */ +#define TST_FRC_DPERR_MR BIT_7 /* force DATAPERR on MST RD */ +#define TST_FRC_DPERR_MW BIT_6 /* force DATAPERR on MST WR */ +#define TST_FRC_DPERR_TR BIT_5 /* force DATAPERR on TRG RD */ +#define TST_FRC_DPERR_TW BIT_4 /* force DATAPERR on TRG WR */ +#define TST_FRC_APERR_M BIT_3 /* force ADDRPERR on MST */ +#define TST_FRC_APERR_T BIT_2 /* force ADDRPERR on TRG */ +#define TST_CFG_WRITE_ON BIT_1 /* Enable Config Reg WR */ +#define TST_CFG_WRITE_OFF BIT_0 /* Disable Config Reg WR */ + +/* B2_GP_IO */ +#define GLB_GPIO_CLK_DEB_ENA BIT_31 /* Clock Debug Enable */ +#define GLB_GPIO_CLK_DBG_MSK 0x3c000000 /* Clock Debug */ + +#define GLB_GPIO_INT_RST_D3_DIS BIT_15 /* Disable Internal Reset After D3 to D0 */ +#define GLB_GPIO_LED_PAD_SPEED_UP BIT_14 /* LED PAD Speed Up */ +#define GLB_GPIO_STAT_RACE_DIS BIT_13 /* Status Race Disable */ +#define GLB_GPIO_TEST_SEL_MSK 0x00001800 /* Testmode Select */ +#define GLB_GPIO_TEST_SEL_BASE BIT_11 +#define GLB_GPIO_RAND_ENA BIT_10 /* Random Enable */ +#define GLB_GPIO_RAND_BIT_1 BIT_9 /* Random Bit 1 */ + +/* B2_I2C_CTRL 32 bit I2C HW Control Register */ +#define I2C_FLAG BIT_31 /* Start read/write if WR */ +#define I2C_ADDR (0x7fff<<16) /* Bit 30..16: Addr to be RD/WR */ +#define I2C_DEV_SEL (0x7f<<9) /* Bit 15.. 9: I2C Device Select */ +#define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */ +#define I2C_DEV_SIZE (7<<1) /* Bit 3.. 1: I2C Device Size */ +#define I2C_025K_DEV (0<<1) /* 0: 256 Bytes or smal. */ +#define I2C_05K_DEV (1<<1) /* 1: 512 Bytes */ +#define I2C_1K_DEV (2<<1) /* 2: 1024 Bytes */ +#define I2C_2K_DEV (3<<1) /* 3: 2048 Bytes */ +#define I2C_4K_DEV (4<<1) /* 4: 4096 Bytes */ +#define I2C_8K_DEV (5<<1) /* 5: 8192 Bytes */ +#define I2C_16K_DEV (6<<1) /* 6: 16384 Bytes */ +#define I2C_32K_DEV (7<<1) /* 7: 32768 Bytes */ +#define I2C_STOP BIT_0 /* Interrupt I2C transfer */ + +/* B2_I2C_IRQ 32 bit I2C HW IRQ Register */ +#define I2C_CLR_IRQ BIT_0 /* Clear I2C IRQ */ + +/* B2_I2C_SW 32 bit (8 bit access) I2C HW SW Port Register */ +#define I2C_DATA_DIR BIT_2 /* direction of I2C_DATA */ +#define I2C_DATA BIT_1 /* I2C Data Port */ +#define I2C_CLK BIT_0 /* I2C Clock Port */ + +/* I2C Address */ +#define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address (Volt and Temp) */ + + +/* B2_BSC_CTRL 8 bit Blink Source Counter Control */ +#define BSC_START BIT_1 /* Start Blink Source Counter */ +#define BSC_STOP BIT_0 /* Stop Blink Source Counter */ + +/* B2_BSC_STAT 8 bit Blink Source Counter Status */ +#define BSC_SRC BIT_0 /* Blink Source, 0=Off / 1=On */ + +/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */ +#define BSC_T_ON BIT_2 /* Test mode on */ +#define BSC_T_OFF BIT_1 /* Test mode off */ +#define BSC_T_STEP BIT_0 /* Test step */ + +/* Y2_PEX_PHY_ADDR/DATA PEX PHY address and data reg (Yukon-2 only) */ +#define PEX_RD_ACCESS BIT_31 /* Access Mode Read = 1, Write = 0 */ +#define PEX_DB_ACCESS BIT_30 /* Access to debug register */ + +/* B3_RAM_ADDR 32 bit RAM Address, to read or write */ +#define RAM_ADR_RAN 0x0007ffff /* Bit 18.. 0: RAM Address Range */ + +/* RAM Interface Registers */ +/* B3_RI_CTRL 16 bit RAM Interface Control Register */ +#define RI_CLR_RD_PERR BIT_9 /* Clear IRQ RAM Read Parity Err */ +#define RI_CLR_WR_PERR BIT_8 /* Clear IRQ RAM Write Parity Err */ +#define RI_RST_CLR BIT_1 /* Clear RAM Interface Reset */ +#define RI_RST_SET BIT_0 /* Set RAM Interface Reset */ + +#define MSK_RI_TO_53 36 /* RAM interface timeout */ + +/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */ +/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */ +/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */ +/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */ +#define TXA_MAX_VAL 0x00ffffff/* Bit 23.. 0: Max TXA Timer/Cnt Val */ + +/* TXA_CTRL 8 bit Tx Arbiter Control Register */ +#define TXA_ENA_FSYNC BIT_7 /* Enable force of sync Tx queue */ +#define TXA_DIS_FSYNC BIT_6 /* Disable force of sync Tx queue */ +#define TXA_ENA_ALLOC BIT_5 /* Enable alloc of free bandwidth */ +#define TXA_DIS_ALLOC BIT_4 /* Disable alloc of free bandwidth */ +#define TXA_START_RC BIT_3 /* Start sync Rate Control */ +#define TXA_STOP_RC BIT_2 /* Stop sync Rate Control */ +#define TXA_ENA_ARB BIT_1 /* Enable Tx Arbiter */ +#define TXA_DIS_ARB BIT_0 /* Disable Tx Arbiter */ + +/* TXA_TEST 8 bit Tx Arbiter Test Register */ +#define TXA_INT_T_ON BIT_5 /* Tx Arb Interval Timer Test On */ +#define TXA_INT_T_OFF BIT_4 /* Tx Arb Interval Timer Test Off */ +#define TXA_INT_T_STEP BIT_3 /* Tx Arb Interval Timer Step */ +#define TXA_LIM_T_ON BIT_2 /* Tx Arb Limit Timer Test On */ +#define TXA_LIM_T_OFF BIT_1 /* Tx Arb Limit Timer Test Off */ +#define TXA_LIM_T_STEP BIT_0 /* Tx Arb Limit Timer Step */ + +/* TXA_STAT 8 bit Tx Arbiter Status Register */ +#define TXA_PRIO_XS BIT_0 /* sync queue has prio to send */ + +/* Q_BC 32 bit Current Byte Counter */ +#define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */ + +/* Rx BMU Control / Status Registers (Yukon-2) */ +#define BMU_IDLE BIT_31 /* BMU Idle State */ +#define BMU_RX_TCP_PKT BIT_30 /* Rx TCP Packet (when RSS Hash enabled) */ +#define BMU_RX_IP_PKT BIT_29 /* Rx IP Packet (when RSS Hash enabled) */ +#define BMU_ENA_RX_RSS_HASH BIT_15 /* Enable Rx RSS Hash */ +#define BMU_DIS_RX_RSS_HASH BIT_14 /* Disable Rx RSS Hash */ +#define BMU_ENA_RX_CHKSUM BIT_13 /* Enable Rx TCP/IP Checksum Check */ +#define BMU_DIS_RX_CHKSUM BIT_12 /* Disable Rx TCP/IP Checksum Check */ +#define BMU_CLR_IRQ_PAR BIT_11 /* Clear IRQ on Parity errors (Rx) */ +#define BMU_CLR_IRQ_TCP BIT_11 /* Clear IRQ on TCP segmen. error (Tx) */ +#define BMU_CLR_IRQ_CHK BIT_10 /* Clear IRQ Check */ +#define BMU_STOP BIT_9 /* Stop Rx/Tx Queue */ +#define BMU_START BIT_8 /* Start Rx/Tx Queue */ +#define BMU_FIFO_OP_ON BIT_7 /* FIFO Operational On */ +#define BMU_FIFO_OP_OFF BIT_6 /* FIFO Operational Off */ +#define BMU_FIFO_ENA BIT_5 /* Enable FIFO */ +#define BMU_FIFO_RST BIT_4 /* Reset FIFO */ +#define BMU_OP_ON BIT_3 /* BMU Operational On */ +#define BMU_OP_OFF BIT_2 /* BMU Operational Off */ +#define BMU_RST_CLR BIT_1 /* Clear BMU Reset (Enable) */ +#define BMU_RST_SET BIT_0 /* Set BMU Reset */ + +#define BMU_CLR_RESET (BMU_FIFO_RST | BMU_OP_OFF | BMU_RST_CLR) +#define BMU_OPER_INIT (BMU_CLR_IRQ_PAR | BMU_CLR_IRQ_CHK | BMU_START | BMU_FIFO_ENA | BMU_OP_ON) + +/* Tx BMU Control / Status Registers (Yukon-2) */ +/* Bit 31: same as for Rx */ +#define BMU_TX_IPIDINCR_ON BIT_13 /* Enable IP ID Increment */ +#define BMU_TX_IPIDINCR_OFF BIT_12 /* Disable IP ID Increment */ +#define BMU_TX_CLR_IRQ_TCP BIT_11 /* Clear IRQ on TCP segm. length mism. */ +/* Bit 10..0: same as for Rx */ + +/* Q_F 32 bit Flag Register */ +#define F_TX_CHK_AUTO_OFF BIT_31 /* Tx checksum auto-calc Off(Yukon EX)*/ +#define F_TX_CHK_AUTO_ON BIT_30 /* Tx checksum auto-calc On(Yukon EX)*/ +#define F_ALM_FULL BIT_28 /* Rx FIFO: almost full */ +#define F_EMPTY BIT_27 /* Tx FIFO: empty flag */ +#define F_FIFO_EOF BIT_26 /* Tag (EOF Flag) bit in FIFO */ +#define F_WM_REACHED BIT_25 /* Watermark reached */ +#define F_M_RX_RAM_DIS BIT_24 /* MAC Rx RAM Read Port disable */ +#define F_FIFO_LEVEL (0x1f<<16) +/* Bit 23..16: # of Qwords in FIFO */ +#define F_WATER_MARK 0x0007ff/* Bit 10.. 0: Watermark */ + +/* Queue Prefetch Unit Offsets, use Y2_PREF_Q_ADDR() to address (Yukon-2 only)*/ +/* PREF_UNIT_CTRL_REG 32 bit Prefetch Control register */ +#define PREF_UNIT_OP_ON BIT_3 /* prefetch unit operational */ +#define PREF_UNIT_OP_OFF BIT_2 /* prefetch unit not operational */ +#define PREF_UNIT_RST_CLR BIT_1 /* Clear Prefetch Unit Reset */ +#define PREF_UNIT_RST_SET BIT_0 /* Set Prefetch Unit Reset */ + +/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */ +/* RB_START 32 bit RAM Buffer Start Address */ +/* RB_END 32 bit RAM Buffer End Address */ +/* RB_WP 32 bit RAM Buffer Write Pointer */ +/* RB_RP 32 bit RAM Buffer Read Pointer */ +/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */ +/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */ +/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */ +/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */ +/* RB_PC 32 bit RAM Buffer Packet Counter */ +/* RB_LEV 32 bit RAM Buffer Level Register */ +#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */ + +/* RB_TST2 8 bit RAM Buffer Test Register 2 */ +#define RB_PC_DEC BIT_3 /* Packet Counter Decrement */ +#define RB_PC_T_ON BIT_2 /* Packet Counter Test On */ +#define RB_PC_T_OFF BIT_1 /* Packet Counter Test Off */ +#define RB_PC_INC BIT_0 /* Packet Counter Increment */ + +/* RB_TST1 8 bit RAM Buffer Test Register 1 */ +#define RB_WP_T_ON BIT_6 /* Write Pointer Test On */ +#define RB_WP_T_OFF BIT_5 /* Write Pointer Test Off */ +#define RB_WP_INC BIT_4 /* Write Pointer Increment */ +#define RB_RP_T_ON BIT_2 /* Read Pointer Test On */ +#define RB_RP_T_OFF BIT_1 /* Read Pointer Test Off */ +#define RB_RP_INC BIT_0 /* Read Pointer Increment */ + +/* RB_CTRL 8 bit RAM Buffer Control Register */ +#define RB_ENA_STFWD BIT_5 /* Enable Store & Forward */ +#define RB_DIS_STFWD BIT_4 /* Disable Store & Forward */ +#define RB_ENA_OP_MD BIT_3 /* Enable Operation Mode */ +#define RB_DIS_OP_MD BIT_2 /* Disable Operation Mode */ +#define RB_RST_CLR BIT_1 /* Clear RAM Buf STM Reset */ +#define RB_RST_SET BIT_0 /* Set RAM Buf STM Reset */ + +/* RAM Buffer High Pause Threshold values */ +#define MSK_RB_ULPP (8 * 1024) /* Upper Level in kB/8 */ +#define MSK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */ +#define MSK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */ + +/* Threshold values for Yukon-EC Ultra */ +#define MSK_ECU_ULPP 0x0080 /* Upper Pause Threshold (multiples of 8) */ +#define MSK_ECU_LLPP 0x0060 /* Lower Pause Threshold (multiples of 8) */ +#define MSK_ECU_AE_THR 0x0070 /* Almost Empty Threshold */ +#define MSK_ECU_TXFF_LEV 0x01a0 /* Tx BMU FIFO Level */ +#define MSK_ECU_JUMBO_WM 0x01 + +#define MSK_BMU_RX_WM 0x80 /* BMU Rx Watermark */ +#define MSK_BMU_TX_WM 0x600 /* BMU Tx Watermark */ +/* performance sensitive drivers should set this define to 0x80 */ +#define MSK_BMU_RX_WM_PEX 0x600 /* BMU Rx Watermark for PEX */ + +/* Receive and Transmit Queues */ +#define Q_R1 0x0000 /* Receive Queue 1 */ +#define Q_R2 0x0080 /* Receive Queue 2 */ +#define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */ +#define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */ +#define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */ +#define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */ + +#define Q_ASF_R1 0x100 /* ASF Rx Queue 1 */ +#define Q_ASF_R2 0x180 /* ASF Rx Queue 2 */ +#define Q_ASF_T1 0x140 /* ASF Tx Queue 1 */ +#define Q_ASF_T2 0x1c0 /* ASF Tx Queue 2 */ + +#define RB_ADDR(Queue, Offs) (B16_RAM_REGS + (Queue) + (Offs)) + +/* Minimum RAM Buffer Rx Queue Size */ +#define MSK_MIN_RXQ_SIZE 10 +/* Minimum RAM Buffer Tx Queue Size */ +#define MSK_MIN_TXQ_SIZE 10 +/* Percentage of queue size from whole memory. 80 % for receive */ +#define MSK_RAM_QUOTA_RX 80 + +/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */ +#define WOL_CTL_LINK_CHG_OCC BIT_15 +#define WOL_CTL_MAGIC_PKT_OCC BIT_14 +#define WOL_CTL_PATTERN_OCC BIT_13 +#define WOL_CTL_CLEAR_RESULT BIT_12 +#define WOL_CTL_ENA_PME_ON_LINK_CHG BIT_11 +#define WOL_CTL_DIS_PME_ON_LINK_CHG BIT_10 +#define WOL_CTL_ENA_PME_ON_MAGIC_PKT BIT_9 +#define WOL_CTL_DIS_PME_ON_MAGIC_PKT BIT_8 +#define WOL_CTL_ENA_PME_ON_PATTERN BIT_7 +#define WOL_CTL_DIS_PME_ON_PATTERN BIT_6 +#define WOL_CTL_ENA_LINK_CHG_UNIT BIT_5 +#define WOL_CTL_DIS_LINK_CHG_UNIT BIT_4 +#define WOL_CTL_ENA_MAGIC_PKT_UNIT BIT_3 +#define WOL_CTL_DIS_MAGIC_PKT_UNIT BIT_2 +#define WOL_CTL_ENA_PATTERN_UNIT BIT_1 +#define WOL_CTL_DIS_PATTERN_UNIT BIT_0 + +#define WOL_CTL_DEFAULT (WOL_CTL_DIS_PME_ON_LINK_CHG | WOL_CTL_DIS_PME_ON_PATTERN | \ + WOL_CTL_DIS_PME_ON_MAGIC_PKT | WOL_CTL_DIS_LINK_CHG_UNIT | \ + WOL_CTL_DIS_PATTERN_UNIT | WOL_CTL_DIS_MAGIC_PKT_UNIT) + +/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */ +#define WOL_CTL_PATT_ENA(x) (BIT_0 << (x)) + +/* WOL_PATT_PME 8 bit WOL PME Match Enable (Yukon-2) */ +#define WOL_PATT_FORCE_PME BIT_7 /* Generates a PME */ +#define WOL_PATT_MATCH_PME_ALL 0x7f + + +/* + * Marvel-PHY Registers, indirect addressed over GMAC + */ +#define PHY_MARV_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_MARV_STAT 0x01 /* 16 bit r/o PHY Status Register */ +#define PHY_MARV_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_MARV_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_MARV_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_MARV_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ +#define PHY_MARV_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_MARV_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_MARV_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ +/* Marvel-specific registers */ +#define PHY_MARV_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg */ +#define PHY_MARV_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ +/* 0x0b - 0x0e: reserved */ +#define PHY_MARV_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ +#define PHY_MARV_PHY_CTRL 0x10 /* 16 bit r/w PHY Specific Control Reg */ +#define PHY_MARV_PHY_STAT 0x11 /* 16 bit r/o PHY Specific Status Reg */ +#define PHY_MARV_INT_MASK 0x12 /* 16 bit r/w Interrupt Mask Reg */ +#define PHY_MARV_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */ +#define PHY_MARV_EXT_CTRL 0x14 /* 16 bit r/w Ext. PHY Specific Ctrl */ +#define PHY_MARV_RXE_CNT 0x15 /* 16 bit r/w Receive Error Counter */ +#define PHY_MARV_EXT_ADR 0x16 /* 16 bit r/w Ext. Ad. for Cable Diag. */ +#define PHY_MARV_PORT_IRQ 0x17 /* 16 bit r/o Port 0 IRQ (88E1111 only) */ +#define PHY_MARV_LED_CTRL 0x18 /* 16 bit r/w LED Control Reg */ +#define PHY_MARV_LED_OVER 0x19 /* 16 bit r/w Manual LED Override Reg */ +#define PHY_MARV_EXT_CTRL_2 0x1a /* 16 bit r/w Ext. PHY Specific Ctrl 2 */ +#define PHY_MARV_EXT_P_STAT 0x1b /* 16 bit r/w Ext. PHY Spec. Stat Reg */ +#define PHY_MARV_CABLE_DIAG 0x1c /* 16 bit r/o Cable Diagnostic Reg */ +#define PHY_MARV_PAGE_ADDR 0x1d /* 16 bit r/w Extended Page Address Reg */ +#define PHY_MARV_PAGE_DATA 0x1e /* 16 bit r/w Extended Page Data Reg */ + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +#define PHY_MARV_FE_LED_PAR 0x16 /* 16 bit r/w LED Parallel Select Reg. */ +#define PHY_MARV_FE_LED_SER 0x17 /* 16 bit r/w LED Stream Select S. LED */ +#define PHY_MARV_FE_VCT_TX 0x1a /* 16 bit r/w VCT Reg. for TXP/N Pins */ +#define PHY_MARV_FE_VCT_RX 0x1b /* 16 bit r/o VCT Reg. for RXP/N Pins */ +#define PHY_MARV_FE_SPEC_2 0x1c /* 16 bit r/w Specific Control Reg. 2 */ + +#define PHY_CT_RESET (1<<15) /* Bit 15: (sc) clear all PHY related regs */ +#define PHY_CT_LOOP (1<<14) /* Bit 14: enable Loopback over PHY */ +#define PHY_CT_SPS_LSB (1<<13) /* Bit 13: Speed select, lower bit */ +#define PHY_CT_ANE (1<<12) /* Bit 12: Auto-Negotiation Enabled */ +#define PHY_CT_PDOWN (1<<11) /* Bit 11: Power Down Mode */ +#define PHY_CT_ISOL (1<<10) /* Bit 10: Isolate Mode */ +#define PHY_CT_RE_CFG (1<<9) /* Bit 9: (sc) Restart Auto-Negotiation */ +#define PHY_CT_DUP_MD (1<<8) /* Bit 8: Duplex Mode */ +#define PHY_CT_COL_TST (1<<7) /* Bit 7: Collision Test enabled */ +#define PHY_CT_SPS_MSB (1<<6) /* Bit 6: Speed select, upper bit */ + +#define PHY_CT_SP1000 PHY_CT_SPS_MSB /* enable speed of 1000 Mbps */ +#define PHY_CT_SP100 PHY_CT_SPS_LSB /* enable speed of 100 Mbps */ +#define PHY_CT_SP10 (0) /* enable speed of 10 Mbps */ + +#define PHY_ST_EXT_ST (1<<8) /* Bit 8: Extended Status Present */ +#define PHY_ST_PRE_SUP (1<<6) /* Bit 6: Preamble Suppression */ +#define PHY_ST_AN_OVER (1<<5) /* Bit 5: Auto-Negotiation Over */ +#define PHY_ST_REM_FLT (1<<4) /* Bit 4: Remote Fault Condition Occured */ +#define PHY_ST_AN_CAP (1<<3) /* Bit 3: Auto-Negotiation Capability */ +#define PHY_ST_LSYNC (1<<2) /* Bit 2: Link Synchronized */ +#define PHY_ST_JAB_DET (1<<1) /* Bit 1: Jabber Detected */ +#define PHY_ST_EXT_REG (1<<0) /* Bit 0: Extended Register available */ + +#define PHY_I1_OUI_MSK (0x3f<<10) /* Bit 15..10: Organization Unique ID */ +#define PHY_I1_MOD_NUM (0x3f<<4) /* Bit 9.. 4: Model Number */ +#define PHY_I1_REV_MSK 0xf /* Bit 3.. 0: Revision Number */ + +/* different Marvell PHY Ids */ +#define PHY_MARV_ID0_VAL 0x0141 /* Marvell Unique Identifier */ + +#define PHY_MARV_ID1_B0 0x0C23 /* Yukon (PHY 88E1011) */ +#define PHY_MARV_ID1_B2 0x0C25 /* Yukon-Plus (PHY 88E1011) */ +#define PHY_MARV_ID1_C2 0x0CC2 /* Yukon-EC (PHY 88E1111) */ +#define PHY_MARV_ID1_Y2 0x0C91 /* Yukon-2 (PHY 88E1112) */ +#define PHY_MARV_ID1_FE 0x0C83 /* Yukon-FE (PHY 88E3082 Rev.A1) */ +#define PHY_MARV_ID1_ECU 0x0CB0 /* Yukon-2 (PHY 88E1149 Rev.B2?) */ + +/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +#define PHY_B_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ +#define PHY_B_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ +#define PHY_B_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ +#define PHY_B_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */ +#define PHY_B_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ +#define PHY_B_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ +#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ + +/***** PHY_MARV_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_MARV_AUNE_LP 16 bit r/w Link Part Ability Reg *****/ +#define PHY_M_AN_NXT_PG BIT_15 /* Request Next Page */ +#define PHY_M_AN_ACK BIT_14 /* (ro) Acknowledge Received */ +#define PHY_M_AN_RF BIT_13 /* Remote Fault */ +#define PHY_M_AN_ASP BIT_11 /* Asymmetric Pause */ +#define PHY_M_AN_PC BIT_10 /* MAC Pause implemented */ +#define PHY_M_AN_100_T4 BIT_9 /* Not cap. 100Base-T4 (always 0) */ +#define PHY_M_AN_100_FD BIT_8 /* Advertise 100Base-TX Full Duplex */ +#define PHY_M_AN_100_HD BIT_7 /* Advertise 100Base-TX Half Duplex */ +#define PHY_M_AN_10_FD BIT_6 /* Advertise 10Base-TX Full Duplex */ +#define PHY_M_AN_10_HD BIT_5 /* Advertise 10Base-TX Half Duplex */ +#define PHY_M_AN_SEL_MSK (0x1f<<4) /* Bit 4.. 0: Selector Field Mask */ + +/* special defines for FIBER (88E1011S only) */ +#define PHY_M_AN_ASP_X BIT_8 /* Asymmetric Pause */ +#define PHY_M_AN_PC_X BIT_7 /* MAC Pause implemented */ +#define PHY_M_AN_1000X_AHD BIT_6 /* Advertise 10000Base-X Half Duplex */ +#define PHY_M_AN_1000X_AFD BIT_5 /* Advertise 10000Base-X Full Duplex */ + +/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */ +#define PHY_M_P_NO_PAUSE_X (0<<7) /* Bit 8.. 7: no Pause Mode */ +#define PHY_M_P_SYM_MD_X (1<<7) /* Bit 8.. 7: symmetric Pause Mode */ +#define PHY_M_P_ASYM_MD_X (2<<7) /* Bit 8.. 7: asymmetric Pause Mode */ +#define PHY_M_P_BOTH_MD_X (3<<7) /* Bit 8.. 7: both Pause Mode */ + +/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +#define PHY_M_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ +#define PHY_M_1000C_MSE BIT_12 /* Manual Master/Slave Enable */ +#define PHY_M_1000C_MSC BIT_11 /* M/S Configuration (1=Master) */ +#define PHY_M_1000C_MPD BIT_10 /* Multi-Port Device */ +#define PHY_M_1000C_AFD BIT_9 /* Advertise Full Duplex */ +#define PHY_M_1000C_AHD BIT_8 /* Advertise Half Duplex */ + +/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/ +#define PHY_M_PC_TX_FFD_MSK (3<<14) /* Bit 15..14: Tx FIFO Depth Mask */ +#define PHY_M_PC_RX_FFD_MSK (3<<12) /* Bit 13..12: Rx FIFO Depth Mask */ +#define PHY_M_PC_ASS_CRS_TX BIT_11 /* Assert CRS on Transmit */ +#define PHY_M_PC_FL_GOOD BIT_10 /* Force Link Good */ +#define PHY_M_PC_EN_DET_MSK (3<<8) /* Bit 9.. 8: Energy Detect Mask */ +#define PHY_M_PC_ENA_EXT_D BIT_7 /* Enable Ext. Distance (10BT) */ +#define PHY_M_PC_MDIX_MSK (3<<5) /* Bit 6.. 5: MDI/MDIX Config. Mask */ +#define PHY_M_PC_DIS_125CLK BIT_4 /* Disable 125 CLK */ +#define PHY_M_PC_MAC_POW_UP BIT_3 /* MAC Power up */ +#define PHY_M_PC_SQE_T_ENA BIT_2 /* SQE Test Enabled */ +#define PHY_M_PC_POL_R_DIS BIT_1 /* Polarity Reversal Disabled */ +#define PHY_M_PC_DIS_JABBER BIT_0 /* Disable Jabber */ + +#define PHY_M_PC_EN_DET SHIFT8(2) /* Energy Detect (Mode 1) */ +#define PHY_M_PC_EN_DET_PLUS SHIFT8(3) /* Energy Detect Plus (Mode 2) */ + +#define PHY_M_PC_MDI_XMODE(x) (SHIFT5(x) & PHY_M_PC_MDIX_MSK) + +#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */ +#define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */ +#define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */ + +/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ +#define PHY_M_PC_DIS_LINK_P BIT_15 /* Disable Link Pulses */ +#define PHY_M_PC_DSC_MSK (7<<12) /* Bit 14..12: Downshift Counter */ +#define PHY_M_PC_DOWN_S_ENA BIT_11 /* Downshift Enable */ +/* !!! Errata in spec. (1 = disable) */ + +#define PHY_M_PC_DSC(x) (SHIFT12(x) & PHY_M_PC_DSC_MSK) +/* 000=1x; 001=2x; 010=3x; 011=4x */ +/* 100=5x; 101=6x; 110=7x; 111=8x */ + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +#define PHY_M_PC_ENA_DTE_DT BIT_15 /* Enable Data Terminal Equ. (DTE) Detect */ +#define PHY_M_PC_ENA_ENE_DT BIT_14 /* Enable Energy Detect (sense & pulse) */ +#define PHY_M_PC_DIS_NLP_CK BIT_13 /* Disable Normal Link Puls (NLP) Check */ +#define PHY_M_PC_ENA_LIP_NP BIT_12 /* Enable Link Partner Next Page Reg. */ +#define PHY_M_PC_DIS_NLP_GN BIT_11 /* Disable Normal Link Puls Generation */ +#define PHY_M_PC_DIS_SCRAMB BIT_9 /* Disable Scrambler */ +#define PHY_M_PC_DIS_FEFI BIT_8 /* Disable Far End Fault Indic. (FEFI) */ +#define PHY_M_PC_SH_TP_SEL BIT_6 /* Shielded Twisted Pair Select */ +#define PHY_M_PC_RX_FD_MSK (3<<2) /* Bit 3.. 2: Rx FIFO Depth Mask */ + +/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/ +#define PHY_M_PS_SPEED_MSK (3<<14) /* Bit 15..14: Speed Mask */ +#define PHY_M_PS_SPEED_1000 BIT_15 /* 10 = 1000 Mbps */ +#define PHY_M_PS_SPEED_100 BIT_14 /* 01 = 100 Mbps */ +#define PHY_M_PS_SPEED_10 0 /* 00 = 10 Mbps */ +#define PHY_M_PS_FULL_DUP BIT_13 /* Full Duplex */ +#define PHY_M_PS_PAGE_REC BIT_12 /* Page Received */ +#define PHY_M_PS_SPDUP_RES BIT_11 /* Speed & Duplex Resolved */ +#define PHY_M_PS_LINK_UP BIT_10 /* Link Up */ +#define PHY_M_PS_CABLE_MSK (7<<7) /* Bit 9.. 7: Cable Length Mask */ +#define PHY_M_PS_MDI_X_STAT BIT_6 /* MDI Crossover Stat (1=MDIX) */ +#define PHY_M_PS_DOWNS_STAT BIT_5 /* Downshift Status (1=downsh.) */ +#define PHY_M_PS_ENDET_STAT BIT_4 /* Energy Detect Status (1=act) */ +#define PHY_M_PS_TX_P_EN BIT_3 /* Tx Pause Enabled */ +#define PHY_M_PS_RX_P_EN BIT_2 /* Rx Pause Enabled */ +#define PHY_M_PS_POL_REV BIT_1 /* Polarity Reversed */ +#define PHY_M_PS_JABBER BIT_0 /* Jabber */ + +#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN) + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +#define PHY_M_PS_DTE_DETECT BIT_15 /* Data Terminal Equipment (DTE) Detected */ +#define PHY_M_PS_RES_SPEED BIT_14 /* Resolved Speed (1=100 Mbps, 0=10 Mbps */ + +/***** PHY_MARV_INT_MASK 16 bit r/w Interrupt Mask Reg *****/ +/***** PHY_MARV_INT_STAT 16 bit r/o Interrupt Status Reg *****/ +#define PHY_M_IS_AN_ERROR BIT_15 /* Auto-Negotiation Error */ +#define PHY_M_IS_LSP_CHANGE BIT_14 /* Link Speed Changed */ +#define PHY_M_IS_DUP_CHANGE BIT_13 /* Duplex Mode Changed */ +#define PHY_M_IS_AN_PR BIT_12 /* Page Received */ +#define PHY_M_IS_AN_COMPL BIT_11 /* Auto-Negotiation Completed */ +#define PHY_M_IS_LST_CHANGE BIT_10 /* Link Status Changed */ +#define PHY_M_IS_SYMB_ERROR BIT_9 /* Symbol Error */ +#define PHY_M_IS_FALSE_CARR BIT_8 /* False Carrier */ +#define PHY_M_IS_FIFO_ERROR BIT_7 /* FIFO Overflow/Underrun Error */ +#define PHY_M_IS_MDI_CHANGE BIT_6 /* MDI Crossover Changed */ +#define PHY_M_IS_DOWNSH_DET BIT_5 /* Downshift Detected */ +#define PHY_M_IS_END_CHANGE BIT_4 /* Energy Detect Changed */ +#define PHY_M_IS_DTE_CHANGE BIT_2 /* DTE Power Det. Status Changed */ +#define PHY_M_IS_POL_CHANGE BIT_1 /* Polarity Changed */ +#define PHY_M_IS_JABBER BIT_0 /* Jabber */ + +#define PHY_M_DEF_MSK (PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR) + +/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/ +#define PHY_M_EC_ENA_BC_EXT BIT_15 /* Enable Block Carr. Ext. (88E1111 only) */ +#define PHY_M_EC_ENA_LIN_LB BIT_14 /* Enable Line Loopback (88E1111 only) */ +#define PHY_M_EC_DIS_LINK_P BIT_12 /* Disable Link Pulses (88E1111 only) */ +#define PHY_M_EC_M_DSC_MSK (3<<10) /* Bit 11..10: Master Downshift Counter */ +/* (88E1011 only) */ +#define PHY_M_EC_S_DSC_MSK (3<<8) /* Bit 9.. 8: Slave Downshift Counter */ +/* (88E1011 only) */ +#define PHY_M_EC_DSC_MSK_2 (7<<9) /* Bit 11.. 9: Downshift Counter */ +/* (88E1111 only) */ +#define PHY_M_EC_DOWN_S_ENA BIT_8 /* Downshift Enable (88E1111 only) */ +/* !!! Errata in spec. (1 = disable) */ +#define PHY_M_EC_RX_TIM_CT BIT_7 /* RGMII Rx Timing Control*/ +#define PHY_M_EC_MAC_S_MSK (7<<4) /* Bit 6.. 4: Def. MAC interface speed */ +#define PHY_M_EC_FIB_AN_ENA BIT_3 /* Fiber Auto-Neg. Enable (88E1011S only) */ +#define PHY_M_EC_DTE_D_ENA BIT_2 /* DTE Detect Enable (88E1111 only) */ +#define PHY_M_EC_TX_TIM_CT BIT_1 /* RGMII Tx Timing Control */ +#define PHY_M_EC_TRANS_DIS BIT_0 /* Transmitter Disable (88E1111 only) */ + +#define PHY_M_EC_M_DSC(x) (SHIFT10 (x) & PHY_M_EC_M_DSC_MSK) +/* 00=1x; 01=2x; 10=3x; 11=4x */ +#define PHY_M_EC_S_DSC(x) (SHIFT8 (x) & PHY_M_EC_S_DSC_MSK) +/* 00=dis; 01=1x; 10=2x; 11=3x */ +#define PHY_M_EC_MAC_S(x) (SHIFT4 (x) & PHY_M_EC_MAC_S_MSK) +/* 01X=0; 110=2.5; 111=25 (MHz) */ + +#define PHY_M_EC_DSC_2(x) (SHIFT9 (x) & PHY_M_EC_DSC_MSK_2) +/* 000=1x; 001=2x; 010=3x; 011=4x */ +/* 100=5x; 101=6x; 110=7x; 111=8x */ +#define MAC_TX_CLK_0_MHZ 2 +#define MAC_TX_CLK_2_5_MHZ 6 +#define MAC_TX_CLK_25_MHZ 7 + +/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/ +#define PHY_M_LEDC_DIS_LED BIT_15 /* Disable LED */ +#define PHY_M_LEDC_PULS_MSK (7<<12) /* Bit 14..12: Pulse Stretch Mask */ +#define PHY_M_LEDC_F_INT BIT_11 /* Force Interrupt */ +#define PHY_M_LEDC_BL_R_MSK (7<<8) /* Bit 10.. 8: Blink Rate Mask */ +#define PHY_M_LEDC_DP_C_LSB BIT_7 /* Duplex Control (LSB, 88E1111 only) */ +#define PHY_M_LEDC_TX_C_LSB BIT_6 /* Tx Control (LSB, 88E1111 only) */ +#define PHY_M_LEDC_LK_C_MSK (7<<3) /* Bit 5.. 3: Link Control Mask */ +/* (88E1111 only) */ +#define PHY_M_LEDC_LINK_MSK (3<<3) /* Bit 4.. 3: Link Control Mask */ +/* (88E1011 only) */ +#define PHY_M_LEDC_DP_CTRL BIT_2 /* Duplex Control */ +#define PHY_M_LEDC_DP_C_MSB BIT_2 /* Duplex Control (MSB, 88E1111 only) */ +#define PHY_M_LEDC_RX_CTRL BIT_1 /* Rx Activity / Link */ +#define PHY_M_LEDC_TX_CTRL BIT_0 /* Tx Activity / Link */ +#define PHY_M_LEDC_TX_C_MSB BIT_0 /* Tx Control (MSB, 88E1111 only) */ + +#define PHY_M_LED_PULS_DUR(x) (SHIFT12 (x) & PHY_M_LEDC_PULS_MSK) + +#define PULS_NO_STR 0 /* no pulse stretching */ +#define PULS_21MS 1 /* 21 ms to 42 ms */ +#define PULS_42MS 2 /* 42 ms to 84 ms */ +#define PULS_84MS 3 /* 84 ms to 170 ms */ +#define PULS_170MS 4 /* 170 ms to 340 ms */ +#define PULS_340MS 5 /* 340 ms to 670 ms */ +#define PULS_670MS 6 /* 670 ms to 1.3 s */ +#define PULS_1300MS 7 /* 1.3 s to 2.7 s */ + +#define PHY_M_LED_BLINK_RT(x) (SHIFT8 (x) & PHY_M_LEDC_BL_R_MSK) + +#define BLINK_42MS 0 /* 42 ms */ +#define BLINK_84MS 1 /* 84 ms */ +#define BLINK_170MS 2 /* 170 ms */ +#define BLINK_340MS 3 /* 340 ms */ +#define BLINK_670MS 4 /* 670 ms */ + +/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ +#define PHY_M_LED_MO_SGMII(x) SHIFT14 (x) /* Bit 15..14: SGMII AN Timer */ +#define PHY_M_LED_MO_DUP(x) SHIFT10 (x) /* Bit 11..10: Duplex */ +#define PHY_M_LED_MO_10(x) SHIFT8 (x) /* Bit 9.. 8: Link 10 */ +#define PHY_M_LED_MO_100(x) SHIFT6 (x) /* Bit 7.. 6: Link 100 */ +#define PHY_M_LED_MO_1000(x) SHIFT4 (x) /* Bit 5.. 4: Link 1000 */ +#define PHY_M_LED_MO_RX(x) SHIFT2 (x) /* Bit 3.. 2: Rx */ +#define PHY_M_LED_MO_TX(x) SHIFT0 (x) /* Bit 1.. 0: Tx */ + +#define MO_LED_NORM 0 +#define MO_LED_BLINK 1 +#define MO_LED_OFF 2 +#define MO_LED_ON 3 + +/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ +#define PHY_M_EC2_FI_IMPED BIT_6 /* Fiber Input Impedance */ +#define PHY_M_EC2_FO_IMPED BIT_5 /* Fiber Output Impedance */ +#define PHY_M_EC2_FO_M_CLK BIT_4 /* Fiber Mode Clock Enable */ +#define PHY_M_EC2_FO_BOOST BIT_3 /* Fiber Output Boost */ +#define PHY_M_EC2_FO_AM_MSK 7 /* Bit 2.. 0: Fiber Output Amplitude */ + +/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/ +#define PHY_M_FC_AUTO_SEL BIT_15 /* Fiber/Copper Auto Sel. Dis. */ +#define PHY_M_FC_AN_REG_ACC BIT_14 /* Fiber/Copper AN Reg. Access */ +#define PHY_M_FC_RESOLUTION BIT_13 /* Fiber/Copper Resolution */ +#define PHY_M_SER_IF_AN_BP BIT_12 /* Ser. IF AN Bypass Enable */ +#define PHY_M_SER_IF_BP_ST BIT_11 /* Ser. IF AN Bypass Status */ +#define PHY_M_IRQ_POLARITY BIT_10 /* IRQ polarity */ +#define PHY_M_DIS_AUT_MED BIT_9 /* Disable Aut. Medium Reg. Selection */ +/* (88E1111 only) */ +#define PHY_M_UNDOC1 BIT_7 /* undocumented bit !! */ +#define PHY_M_DTE_POW_STAT BIT_4 /* DTE Power Status (88E1111 only) */ +#define PHY_M_MODE_MASK 0xf /* Bit 3.. 0: copy of HWCFG MODE[3:0] */ + +/***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/ +#define PHY_M_CABD_ENA_TEST BIT_15 /* Enable Test (Page 0) */ +#define PHY_M_CABD_DIS_WAIT BIT_15 /* Disable Waiting Period (Page 1) */ +/* (88E1111 only) */ +#define PHY_M_CABD_STAT_MSK (3<<13) /* Bit 14..13: Status Mask */ +#define PHY_M_CABD_AMPL_MSK (0x1f<<8) /* Bit 12.. 8: Amplitude Mask */ +/* (88E1111 only) */ +#define PHY_M_CABD_DIST_MSK 0xff /* Bit 7.. 0: Distance Mask */ + +/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */ +#define CABD_STAT_NORMAL 0 +#define CABD_STAT_SHORT 1 +#define CABD_STAT_OPEN 2 +#define CABD_STAT_FAIL 3 + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +/***** PHY_MARV_FE_LED_PAR 16 bit r/w LED Parallel Select Reg. *****/ +#define PHY_M_FELP_LED2_MSK (0xf<<8) /* Bit 11.. 8: LED2 Mask (LINK) */ +#define PHY_M_FELP_LED1_MSK (0xf<<4) /* Bit 7.. 4: LED1 Mask (ACT) */ +#define PHY_M_FELP_LED0_MSK 0xf /* Bit 3.. 0: LED0 Mask (SPEED) */ + +#define PHY_M_FELP_LED2_CTRL(x) (SHIFT8 (x) & PHY_M_FELP_LED2_MSK) +#define PHY_M_FELP_LED1_CTRL(x) (SHIFT4 (x) & PHY_M_FELP_LED1_MSK) +#define PHY_M_FELP_LED0_CTRL(x) (SHIFT0 (x) & PHY_M_FELP_LED0_MSK) + +#define LED_PAR_CTRL_COLX 0x00 +#define LED_PAR_CTRL_ERROR 0x01 +#define LED_PAR_CTRL_DUPLEX 0x02 +#define LED_PAR_CTRL_DP_COL 0x03 +#define LED_PAR_CTRL_SPEED 0x04 +#define LED_PAR_CTRL_LINK 0x05 +#define LED_PAR_CTRL_TX 0x06 +#define LED_PAR_CTRL_RX 0x07 +#define LED_PAR_CTRL_ACT 0x08 +#define LED_PAR_CTRL_LNK_RX 0x09 +#define LED_PAR_CTRL_LNK_AC 0x0a +#define LED_PAR_CTRL_ACT_BL 0x0b +#define LED_PAR_CTRL_TX_BL 0x0c +#define LED_PAR_CTRL_RX_BL 0x0d +#define LED_PAR_CTRL_COL_BL 0x0e +#define LED_PAR_CTRL_INACT 0x0f + +/***** PHY_MARV_FE_SPEC_2 16 bit r/w Specific Control Reg. 2 *****/ +#define PHY_M_FESC_DIS_WAIT BIT_2 /* Disable TDR Waiting Period */ +#define PHY_M_FESC_ENA_MCLK BIT_1 /* Enable MAC Rx Clock in sleep mode */ +#define PHY_M_FESC_SEL_CL_A BIT_0 /* Select Class A driver (100B-TX) */ + +/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ +/***** PHY_MARV_PHY_CTRL (page 1) 16 bit r/w Fiber Specific Ctrl *****/ +#define PHY_M_FIB_FORCE_LNK BIT_10 /* Force Link Good */ +#define PHY_M_FIB_SIGD_POL BIT_9 /* SIGDET Polarity */ +#define PHY_M_FIB_TX_DIS BIT_3 /* Transmitter Disable */ + +/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/ +#define PHY_M_MAC_MD_MSK (7<<7) /* Bit 9.. 7: Mode Select Mask */ +#define PHY_M_MAC_MD_AUTO 3 /* Auto Copper/1000Base-X */ +#define PHY_M_MAC_MD_COPPER 5 /* Copper only */ +#define PHY_M_MAC_MD_1000BX 7 /* 1000Base-X only */ +#define PHY_M_MAC_MODE_SEL(x) (SHIFT7 (x) & PHY_M_MAC_MD_MSK) + +/***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/ +#define PHY_M_LEDC_LOS_MSK (0xf<<12) /* Bit 15..12: LOS LED Ctrl. Mask */ +#define PHY_M_LEDC_INIT_MSK (0xf<<8) /* Bit 11.. 8: INIT LED Ctrl. Mask */ +#define PHY_M_LEDC_STA1_MSK (0xf<<4) /* Bit 7.. 4: STAT1 LED Ctrl. Mask */ +#define PHY_M_LEDC_STA0_MSK 0xf /* Bit 3.. 0: STAT0 LED Ctrl. Mask */ + +#define PHY_M_LEDC_LOS_CTRL(x) (SHIFT12 (x) & PHY_M_LEDC_LOS_MSK) +#define PHY_M_LEDC_INIT_CTRL(x) (SHIFT8 (x) & PHY_M_LEDC_INIT_MSK) +#define PHY_M_LEDC_STA1_CTRL(x) (SHIFT4 (x) & PHY_M_LEDC_STA1_MSK) +#define PHY_M_LEDC_STA0_CTRL(x) (SHIFT0 (x) & PHY_M_LEDC_STA0_MSK) + +/***** PHY_MARV_PHY_STAT (page 3) 16 bit r/w Polarity Control Reg. *****/ +#define PHY_M_POLC_LS1M_MSK (0xf<<12) /* Bit 15..12: LOS,STAT1 Mix % Mask */ +#define PHY_M_POLC_IS0M_MSK (0xf<<8) /* Bit 11.. 8: INIT,STAT0 Mix % Mask */ +#define PHY_M_POLC_LOS_MSK (0x3<<6) /* Bit 7.. 6: LOS Pol. Ctrl. Mask */ +#define PHY_M_POLC_INIT_MSK (0x3<<4) /* Bit 5.. 4: INIT Pol. Ctrl. Mask */ +#define PHY_M_POLC_STA1_MSK (0x3<<2) /* Bit 3.. 2: STAT1 Pol. Ctrl. Mask */ +#define PHY_M_POLC_STA0_MSK 0x3 /* Bit 1.. 0: STAT0 Pol. Ctrl. Mask */ + +#define PHY_M_POLC_LS1_P_MIX(x) (SHIFT12 (x) & PHY_M_POLC_LS1M_MSK) +#define PHY_M_POLC_IS0_P_MIX(x) (SHIFT8 (x) & PHY_M_POLC_IS0M_MSK) +#define PHY_M_POLC_LOS_CTRL(x) (SHIFT6 (x) & PHY_M_POLC_LOS_MSK) +#define PHY_M_POLC_INIT_CTRL(x) (SHIFT4 (x) & PHY_M_POLC_INIT_MSK) +#define PHY_M_POLC_STA1_CTRL(x) (SHIFT2 (x) & PHY_M_POLC_STA1_MSK) +#define PHY_M_POLC_STA0_CTRL(x) (SHIFT0 (x) & PHY_M_POLC_STA0_MSK) + +/* + * GMAC registers + * + * The GMAC registers are 16 or 32 bits wide. + * The GMACs host processor interface is 16 bits wide, + * therefore ALL registers will be addressed with 16 bit accesses. + * + * Note: NA reg = Network Address e.g DA, SA etc. + */ + +/* Port Registers */ +#define GM_GP_STAT 0x0000 /* 16 bit r/o General Purpose Status */ +#define GM_GP_CTRL 0x0004 /* 16 bit r/w General Purpose Control */ +#define GM_TX_CTRL 0x0008 /* 16 bit r/w Transmit Control Reg. */ +#define GM_RX_CTRL 0x000c /* 16 bit r/w Receive Control Reg. */ +#define GM_TX_FLOW_CTRL 0x0010 /* 16 bit r/w Transmit Flow-Control */ +#define GM_TX_PARAM 0x0014 /* 16 bit r/w Transmit Parameter Reg. */ +#define GM_SERIAL_MODE 0x0018 /* 16 bit r/w Serial Mode Register */ + +/* Source Address Registers */ +#define GM_SRC_ADDR_1L 0x001c /* 16 bit r/w Source Address 1 (low) */ +#define GM_SRC_ADDR_1M 0x0020 /* 16 bit r/w Source Address 1 (middle) */ +#define GM_SRC_ADDR_1H 0x0024 /* 16 bit r/w Source Address 1 (high) */ +#define GM_SRC_ADDR_2L 0x0028 /* 16 bit r/w Source Address 2 (low) */ +#define GM_SRC_ADDR_2M 0x002c /* 16 bit r/w Source Address 2 (middle) */ +#define GM_SRC_ADDR_2H 0x0030 /* 16 bit r/w Source Address 2 (high) */ + +/* Multicast Address Hash Registers */ +#define GM_MC_ADDR_H1 0x0034 /* 16 bit r/w Multicast Address Hash 1 */ +#define GM_MC_ADDR_H2 0x0038 /* 16 bit r/w Multicast Address Hash 2 */ +#define GM_MC_ADDR_H3 0x003c /* 16 bit r/w Multicast Address Hash 3 */ +#define GM_MC_ADDR_H4 0x0040 /* 16 bit r/w Multicast Address Hash 4 */ + +/* Interrupt Source Registers */ +#define GM_TX_IRQ_SRC 0x0044 /* 16 bit r/o Tx Overflow IRQ Source */ +#define GM_RX_IRQ_SRC 0x0048 /* 16 bit r/o Rx Overflow IRQ Source */ +#define GM_TR_IRQ_SRC 0x004c /* 16 bit r/o Tx/Rx Over. IRQ Source */ + +/* Interrupt Mask Registers */ +#define GM_TX_IRQ_MSK 0x0050 /* 16 bit r/w Tx Overflow IRQ Mask */ +#define GM_RX_IRQ_MSK 0x0054 /* 16 bit r/w Rx Overflow IRQ Mask */ +#define GM_TR_IRQ_MSK 0x0058 /* 16 bit r/w Tx/Rx Over. IRQ Mask */ + +/* Serial Management Interface (SMI) Registers */ +#define GM_SMI_CTRL 0x0080 /* 16 bit r/w SMI Control Register */ +#define GM_SMI_DATA 0x0084 /* 16 bit r/w SMI Data Register */ +#define GM_PHY_ADDR 0x0088 /* 16 bit r/w GPHY Address Register */ + +/* MIB Counters */ +#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */ +#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */ + +/* + * MIB Counters base address definitions (low word) - + * use offset 4 for access to high word (32 bit r/o) + */ +#define GM_RXF_UC_OK (GM_MIB_CNT_BASE + 0) /* Unicast Frames Received OK */ +#define GM_RXF_BC_OK (GM_MIB_CNT_BASE + 8) /* Broadcast Frames Received OK */ +#define GM_RXF_MPAUSE (GM_MIB_CNT_BASE + 16) /* Pause MAC Ctrl Frames Received */ +#define GM_RXF_MC_OK (GM_MIB_CNT_BASE + 24) /* Multicast Frames Received OK */ +#define GM_RXF_FCS_ERR (GM_MIB_CNT_BASE + 32) /* Rx Frame Check Seq. Error */ +#define GM_RXF_SPARE1 (GM_MIB_CNT_BASE + 40) /* Rx spare 1 */ +#define GM_RXO_OK_LO (GM_MIB_CNT_BASE + 48) /* Octets Received OK Low */ +#define GM_RXO_OK_HI (GM_MIB_CNT_BASE + 56) /* Octets Received OK High */ +#define GM_RXO_ERR_LO (GM_MIB_CNT_BASE + 64) /* Octets Received Invalid Low */ +#define GM_RXO_ERR_HI (GM_MIB_CNT_BASE + 72) /* Octets Received Invalid High */ +#define GM_RXF_SHT (GM_MIB_CNT_BASE + 80) /* Frames <64 Byte Received OK */ +#define GM_RXE_FRAG (GM_MIB_CNT_BASE + 88) /* Frames <64 Byte Received with FCS Err */ +#define GM_RXF_64B (GM_MIB_CNT_BASE + 96) /* 64 Byte Rx Frame */ +#define GM_RXF_127B (GM_MIB_CNT_BASE + 104) /* 65-127 Byte Rx Frame */ +#define GM_RXF_255B (GM_MIB_CNT_BASE + 112) /* 128-255 Byte Rx Frame */ +#define GM_RXF_511B (GM_MIB_CNT_BASE + 120) /* 256-511 Byte Rx Frame */ +#define GM_RXF_1023B (GM_MIB_CNT_BASE + 128) /* 512-1023 Byte Rx Frame */ +#define GM_RXF_1518B (GM_MIB_CNT_BASE + 136) /* 1024-1518 Byte Rx Frame */ +#define GM_RXF_MAX_SZ (GM_MIB_CNT_BASE + 144) /* 1519-MaxSize Byte Rx Frame */ +#define GM_RXF_LNG_ERR (GM_MIB_CNT_BASE + 152) /* Rx Frame too Long Error */ +#define GM_RXF_JAB_PKT (GM_MIB_CNT_BASE + 160) /* Rx Jabber Packet Frame */ +#define GM_RXF_SPARE2 (GM_MIB_CNT_BASE + 168) /* Rx spare 2 */ +#define GM_RXE_FIFO_OV (GM_MIB_CNT_BASE + 176) /* Rx FIFO overflow Event */ +#define GM_RXF_SPARE3 (GM_MIB_CNT_BASE + 184) /* Rx spare 3 */ +#define GM_TXF_UC_OK (GM_MIB_CNT_BASE + 192) /* Unicast Frames Xmitted OK */ +#define GM_TXF_BC_OK (GM_MIB_CNT_BASE + 200) /* Broadcast Frames Xmitted OK */ +#define GM_TXF_MPAUSE (GM_MIB_CNT_BASE + 208) /* Pause MAC Ctrl Frames Xmitted */ +#define GM_TXF_MC_OK (GM_MIB_CNT_BASE + 216) /* Multicast Frames Xmitted OK */ +#define GM_TXO_OK_LO (GM_MIB_CNT_BASE + 224) /* Octets Transmitted OK Low */ +#define GM_TXO_OK_HI (GM_MIB_CNT_BASE + 232) /* Octets Transmitted OK High */ +#define GM_TXF_64B (GM_MIB_CNT_BASE + 240) /* 64 Byte Tx Frame */ +#define GM_TXF_127B (GM_MIB_CNT_BASE + 248) /* 65-127 Byte Tx Frame */ +#define GM_TXF_255B (GM_MIB_CNT_BASE + 256) /* 128-255 Byte Tx Frame */ +#define GM_TXF_511B (GM_MIB_CNT_BASE + 264) /* 256-511 Byte Tx Frame */ +#define GM_TXF_1023B (GM_MIB_CNT_BASE + 272) /* 512-1023 Byte Tx Frame */ +#define GM_TXF_1518B (GM_MIB_CNT_BASE + 280) /* 1024-1518 Byte Tx Frame */ +#define GM_TXF_MAX_SZ (GM_MIB_CNT_BASE + 288) /* 1519-MaxSize Byte Tx Frame */ +#define GM_TXF_SPARE1 (GM_MIB_CNT_BASE + 296) /* Tx spare 1 */ +#define GM_TXF_COL (GM_MIB_CNT_BASE + 304) /* Tx Collision */ +#define GM_TXF_LAT_COL (GM_MIB_CNT_BASE + 312) /* Tx Late Collision */ +#define GM_TXF_ABO_COL (GM_MIB_CNT_BASE + 320) /* Tx aborted due to Exces. Col. */ +#define GM_TXF_MUL_COL (GM_MIB_CNT_BASE + 328) /* Tx Multiple Collision */ +#define GM_TXF_SNG_COL (GM_MIB_CNT_BASE + 336) /* Tx Single Collision */ +#define GM_TXE_FIFO_UR (GM_MIB_CNT_BASE + 344) /* Tx FIFO Underrun Event */ + +/*----------------------------------------------------------------------------*/ +/* + * GMAC Bit Definitions + * + * If the bit access behaviour differs from the register access behaviour + * (r/w, r/o) this is documented after the bit number. + * The following bit access behaviours are used: + * (sc) self clearing + * (r/o) read only + */ + +/* GM_GP_STAT 16 bit r/o General Purpose Status Register */ +#define GM_GPSR_SPEED BIT_15 /* Port Speed (1 = 100 Mbps) */ +#define GM_GPSR_DUPLEX BIT_14 /* Duplex Mode (1 = Full) */ +#define GM_GPSR_FC_TX_DIS BIT_13 /* Tx Flow-Control Mode Disabled */ +#define GM_GPSR_LINK_UP BIT_12 /* Link Up Status */ +#define GM_GPSR_PAUSE BIT_11 /* Pause State */ +#define GM_GPSR_TX_ACTIVE BIT_10 /* Tx in Progress */ +#define GM_GPSR_EXC_COL BIT_9 /* Excessive Collisions Occured */ +#define GM_GPSR_LAT_COL BIT_8 /* Late Collisions Occured */ +#define GM_GPSR_PHY_ST_CH BIT_5 /* PHY Status Change */ +#define GM_GPSR_GIG_SPEED BIT_4 /* Gigabit Speed (1 = 1000 Mbps) */ +#define GM_GPSR_PART_MODE BIT_3 /* Partition mode */ +#define GM_GPSR_FC_RX_DIS BIT_2 /* Rx Flow-Control Mode Disabled */ + +/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */ +#define GM_GPCR_RMII_PH_ENA BIT_15 /* Enable RMII for PHY (Yukon-FE only) */ +#define GM_GPCR_RMII_LB_ENA BIT_14 /* Enable RMII Loopback (Yukon-FE only) */ +#define GM_GPCR_FC_TX_DIS BIT_13 /* Disable Tx Flow-Control Mode */ +#define GM_GPCR_TX_ENA BIT_12 /* Enable Transmit */ +#define GM_GPCR_RX_ENA BIT_11 /* Enable Receive */ +#define GM_GPCR_LOOP_ENA BIT_9 /* Enable MAC Loopback Mode */ +#define GM_GPCR_PART_ENA BIT_8 /* Enable Partition Mode */ +#define GM_GPCR_GIGS_ENA BIT_7 /* Gigabit Speed (1000 Mbps) */ +#define GM_GPCR_FL_PASS BIT_6 /* Force Link Pass */ +#define GM_GPCR_DUP_FULL BIT_5 /* Full Duplex Mode */ +#define GM_GPCR_FC_RX_DIS BIT_4 /* Disable Rx Flow-Control Mode */ +#define GM_GPCR_SPEED_100 BIT_3 /* Port Speed 100 Mbps */ +#define GM_GPCR_AU_DUP_DIS BIT_2 /* Disable Auto-Update Duplex */ +#define GM_GPCR_AU_FCT_DIS BIT_1 /* Disable Auto-Update Flow-C. */ +#define GM_GPCR_AU_SPD_DIS BIT_0 /* Disable Auto-Update Speed */ + +#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100) +#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS | GM_GPCR_AU_SPD_DIS) + +/* GM_TX_CTRL 16 bit r/w Transmit Control Register */ +#define GM_TXCR_FORCE_JAM BIT_15 /* Force Jam / Flow-Control */ +#define GM_TXCR_CRC_DIS BIT_14 /* Disable insertion of CRC */ +#define GM_TXCR_PAD_DIS BIT_13 /* Disable padding of packets */ +#define GM_TXCR_COL_THR_MSK (7<<10) /* Bit 12..10: Collision Threshold Mask */ +#define GM_TXCR_PAD_PAT_MSK 0xff /* Bit 7.. 0: Padding Pattern Mask */ +/* (Yukon-2 only) */ + +#define TX_COL_THR(x) (SHIFT10 (x) & GM_TXCR_COL_THR_MSK) +#define TX_COL_DEF 0x04 + +/* GM_RX_CTRL 16 bit r/w Receive Control Register */ +#define GM_RXCR_UCF_ENA BIT_15 /* Enable Unicast filtering */ +#define GM_RXCR_MCF_ENA BIT_14 /* Enable Multicast filtering */ +#define GM_RXCR_CRC_DIS BIT_13 /* Remove 4-byte CRC */ +#define GM_RXCR_PASS_FC BIT_12 /* Pass FC packets to FIFO (Yukon-1 only) */ + +/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */ +#define GM_TXPA_JAMLEN_MSK (3<<14) /* Bit 15..14: Jam Length Mask */ +#define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13.. 9: Jam IPG Mask */ +#define GM_TXPA_JAMDAT_MSK (0x1f<<4) /* Bit 8.. 4: IPG Jam to Data Mask */ +#define GM_TXPA_BO_LIM_MSK 0x0f /* Bit 3.. 0: Backoff Limit Mask */ +/* (Yukon-2 only) */ + +#define TX_JAM_LEN_VAL(x) (SHIFT14 (x) & GM_TXPA_JAMLEN_MSK) +#define TX_JAM_IPG_VAL(x) (SHIFT9 (x) & GM_TXPA_JAMIPG_MSK) +#define TX_IPG_JAM_DATA(x) (SHIFT4 (x) & GM_TXPA_JAMDAT_MSK) +#define TX_BACK_OFF_LIM(x) ((x) & GM_TXPA_BO_LIM_MSK) + +#define TX_JAM_LEN_DEF 0x03 +#define TX_JAM_IPG_DEF 0x0b +#define TX_IPG_JAM_DEF 0x1c +#define TX_BOF_LIM_DEF 0x04 + +/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */ +#define GM_SMOD_DATABL_MSK (0x1f<<11) /* Bit 15..11: Data Blinder */ +/* r/o on Yukon, r/w on Yukon-EC */ +#define GM_SMOD_LIMIT_4 BIT_10 /* 4 consecutive Tx trials */ +#define GM_SMOD_VLAN_ENA BIT_9 /* Enable VLAN (Max. Frame Len) */ +#define GM_SMOD_JUMBO_ENA BIT_8 /* Enable Jumbo (Max. Frame Len) */ +#define GM_SMOD_IPG_MSK 0x1f /* Bit 4.. 0: Inter-Packet Gap (IPG) */ + +#define DATA_BLIND_VAL(x) (SHIFT11 (x) & GM_SMOD_DATABL_MSK) +#define IPG_DATA_VAL(x) ((x) & GM_SMOD_IPG_MSK) + +#define DATA_BLIND_DEF 0x04 +#define IPG_DATA_DEF 0x1e + +/* GM_SMI_CTRL 16 bit r/w SMI Control Register */ +#define GM_SMI_CT_PHY_A_MSK (0x1f<<11) /* Bit 15..11: PHY Device Address */ +#define GM_SMI_CT_REG_A_MSK (0x1f<<6) /* Bit 10.. 6: PHY Register Address */ +#define GM_SMI_CT_OP_RD BIT_5 /* OpCode Read (0=Write)*/ +#define GM_SMI_CT_RD_VAL BIT_4 /* Read Valid (Read completed) */ +#define GM_SMI_CT_BUSY BIT_3 /* Busy (Operation in progress) */ + +#define GM_SMI_CT_PHY_AD(x) (SHIFT11 (x) & GM_SMI_CT_PHY_A_MSK) +#define GM_SMI_CT_REG_AD(x) (SHIFT6 (x) & GM_SMI_CT_REG_A_MSK) + +/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */ +#define GM_PAR_MIB_CLR BIT_5 /* Set MIB Clear Counter Mode */ +#define GM_PAR_MIB_TST BIT_4 /* MIB Load Counter (Test Mode) */ + +/* Receive Frame Status Encoding */ +#define GMR_FS_LEN_MSK (0xffff<<16) /* Bit 31..16: Rx Frame Length */ +#define GMR_FS_VLAN BIT_13 /* VLAN Packet */ +#define GMR_FS_JABBER BIT_12 /* Jabber Packet */ +#define GMR_FS_UN_SIZE BIT_11 /* Undersize Packet */ +#define GMR_FS_MC BIT_10 /* Multicast Packet */ +#define GMR_FS_BC BIT_9 /* Broadcast Packet */ +#define GMR_FS_RX_OK BIT_8 /* Receive OK (Good Packet) */ +#define GMR_FS_GOOD_FC BIT_7 /* Good Flow-Control Packet */ +#define GMR_FS_BAD_FC BIT_6 /* Bad Flow-Control Packet */ +#define GMR_FS_MII_ERR BIT_5 /* MII Error */ +#define GMR_FS_LONG_ERR BIT_4 /* Too Long Packet */ +#define GMR_FS_FRAGMENT BIT_3 /* Fragment */ +#define GMR_FS_CRC_ERR BIT_1 /* CRC Error */ +#define GMR_FS_RX_FF_OV BIT_0 /* Rx FIFO Overflow */ + +#define GMR_FS_LEN_SHIFT 16 + +#define GMR_FS_ANY_ERR ( \ + GMR_FS_RX_FF_OV | \ + GMR_FS_CRC_ERR | \ + GMR_FS_FRAGMENT | \ + GMR_FS_LONG_ERR | \ + GMR_FS_MII_ERR | \ + GMR_FS_BAD_FC | \ + GMR_FS_GOOD_FC | \ + GMR_FS_UN_SIZE | \ + GMR_FS_JABBER) + +/* Rx GMAC FIFO Flush Mask (default) */ +#define RX_FF_FL_DEF_MSK GMR_FS_ANY_ERR + +/* Receive and Transmit GMAC FIFO Registers (YUKON only) */ + +/* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */ +/* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */ +/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */ +/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */ +/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */ +/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */ +/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */ +/* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ +/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */ +/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Pointer */ +/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */ +/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */ +/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */ +/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */ + +/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ +#define RX_TRUNC_ON BIT_27 /* enable packet truncation */ +#define RX_TRUNC_OFF BIT_26 /* disable packet truncation */ +#define RX_VLAN_STRIP_ON BIT_25 /* enable VLAN stripping */ +#define RX_VLAN_STRIP_OFF BIT_24 /* disable VLAN stripping */ +#define GMF_RX_MACSEC_FLUSH_ON BIT_23 +#define GMF_RX_MACSEC_FLUSH_OFF BIT_22 +#define GMF_RX_OVER_ON BIT_19 /* enable flushing on receive overrun */ +#define GMF_RX_OVER_OFF BIT_18 /* disable flushing on receive overrun */ +#define GMF_ASF_RX_OVER_ON BIT_17 /* enable flushing of ASF when overrun */ +#define GMF_ASF_RX_OVER_OFF BIT_16 /* disable flushing of ASF when overrun */ +#define GMF_WP_TST_ON BIT_14 /* Write Pointer Test On */ +#define GMF_WP_TST_OFF BIT_13 /* Write Pointer Test Off */ +#define GMF_WP_STEP BIT_12 /* Write Pointer Step/Increment */ +#define GMF_RP_TST_ON BIT_10 /* Read Pointer Test On */ +#define GMF_RP_TST_OFF BIT_9 /* Read Pointer Test Off */ +#define GMF_RP_STEP BIT_8 /* Read Pointer Step/Increment */ +#define GMF_RX_F_FL_ON BIT_7 /* Rx FIFO Flush Mode On */ +#define GMF_RX_F_FL_OFF BIT_6 /* Rx FIFO Flush Mode Off */ +#define GMF_CLI_RX_FO BIT_5 /* Clear IRQ Rx FIFO Overrun */ +#define GMF_CLI_RX_FC BIT_4 /* Clear IRQ Rx Frame Complete */ +#define GMF_OPER_ON BIT_3 /* Operational Mode On */ +#define GMF_OPER_OFF BIT_2 /* Operational Mode Off */ +#define GMF_RST_CLR BIT_1 /* Clear GMAC FIFO Reset */ +#define GMF_RST_SET BIT_0 /* Set GMAC FIFO Reset */ + +/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test (YUKON and Yukon-2) */ +#define TX_STFW_DIS BIT_31 /* Disable Store & Forward (Yukon-EC Ultra) */ +#define TX_STFW_ENA BIT_30 /* Enable Store & Forward (Yukon-EC Ultra) */ +#define TX_VLAN_TAG_ON BIT_25 /* enable VLAN tagging */ +#define TX_VLAN_TAG_OFF BIT_24 /* disable VLAN tagging */ +#define TX_JUMBO_ENA BIT_23 /* Enable Jumbo Mode (Yukon-EC Ultra) */ +#define TX_JUMBO_DIS BIT_22 /* Disable Jumbo Mode (Yukon-EC Ultra) */ +#define GMF_WSP_TST_ON BIT_18 /* Write Shadow Pointer Test On */ +#define GMF_WSP_TST_OFF BIT_17 /* Write Shadow Pointer Test Off */ +#define GMF_WSP_STEP BIT_16 /* Write Shadow Pointer Step/Increment */ +/* Bits 15..8: same as for RX_GMF_CTRL_T */ +#define GMF_CLI_TX_FU BIT_6 /* Clear IRQ Tx FIFO Underrun */ +#define GMF_CLI_TX_FC BIT_5 /* Clear IRQ Tx Frame Complete */ +#define GMF_CLI_TX_PE BIT_4 /* Clear IRQ Tx Parity Error */ +/* Bits 3..0: same as for RX_GMF_CTRL_T */ + +#define GMF_RX_CTRL_DEF (GMF_OPER_ON | GMF_RX_F_FL_ON) +#define GMF_TX_CTRL_DEF GMF_OPER_ON + +#define RX_GMF_AF_THR_MIN 0x0c /* Rx GMAC FIFO Almost Full Thresh. min. */ +#define RX_GMF_FL_THR_DEF 0x0a /* Rx GMAC FIFO Flush Threshold default */ + +/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */ +#define GMT_ST_START BIT_2 /* Start Time Stamp Timer */ +#define GMT_ST_STOP BIT_1 /* Stop Time Stamp Timer */ +#define GMT_ST_CLR_IRQ BIT_0 /* Clear Time Stamp Timer IRQ */ + +/* POLL_CTRL 32 bit Polling Unit control register (Yukon-2 only) */ +#define PC_CLR_IRQ_CHK BIT_5 /* Clear IRQ Check */ +#define PC_POLL_RQ BIT_4 /* Poll Request Start */ +#define PC_POLL_OP_ON BIT_3 /* Operational Mode On */ +#define PC_POLL_OP_OFF BIT_2 /* Operational Mode Off */ +#define PC_POLL_RST_CLR BIT_1 /* Clear Polling Unit Reset (Enable) */ +#define PC_POLL_RST_SET BIT_0 /* Set Polling Unit Reset */ + +/* B28_Y2_ASF_STAT_CMD 32 bit ASF Status and Command Reg */ +/* This register is used by the host driver software */ +#define Y2_ASF_OS_PRES BIT_4 /* ASF operation system present */ +#define Y2_ASF_RESET BIT_3 /* ASF system in reset state */ +#define Y2_ASF_RUNNING BIT_2 /* ASF system operational */ +#define Y2_ASF_CLR_HSTI BIT_1 /* Clear ASF IRQ */ +#define Y2_ASF_IRQ BIT_0 /* Issue an IRQ to ASF system */ + +#define Y2_ASF_UC_STATE (3<<2) /* ASF uC State */ +#define Y2_ASF_CLK_HALT 0 /* ASF system clock stopped */ + +/* B28_Y2_ASF_HCU_CCSR 32bit CPU Control and Status Register (Yukon EX) */ +#define Y2_ASF_HCU_CCSR_SMBALERT_MONITOR BIT_27 /* SMBALERT pin monitor */ +#define Y2_ASF_HCU_CCSR_CPU_SLEEP BIT_26 /* CPU sleep status */ +#define Y2_ASF_HCU_CCSR_CS_TO BIT_25 /* Clock Stretching Timeout */ +#define Y2_ASF_HCU_CCSR_WDOG BIT_24 /* Watchdog Reset */ +#define Y2_ASF_HCU_CCSR_CLR_IRQ_HOST BIT_17 /* Clear IRQ_HOST */ +#define Y2_ASF_HCU_CCSR_SET_IRQ_HCU BIT_16 /* Set IRQ_HCU */ +#define Y2_ASF_HCU_CCSR_AHB_RST BIT_9 /* Reset AHB bridge */ +#define Y2_ASF_HCU_CCSR_CPU_RST_MODE BIT_8 /* CPU Reset Mode */ +#define Y2_ASF_HCU_CCSR_SET_SYNC_CPU BIT_5 +#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE1 BIT_4 +#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE0 BIT_3 +#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE_MSK (BIT_4 | BIT_3) /* CPU Clock Divide */ +#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE_BASE BIT_3 +#define Y2_ASF_HCU_CCSR_OS_PRSNT BIT_2 /* ASF OS Present */ +/* Microcontroller State */ +#define Y2_ASF_HCU_CCSR_UC_STATE_MSK 3 +#define Y2_ASF_HCU_CCSR_UC_STATE_BASE BIT_0 +#define Y2_ASF_HCU_CCSR_ASF_RESET 0 +#define Y2_ASF_HCU_CCSR_ASF_HALTED BIT_1 +#define Y2_ASF_HCU_CCSR_ASF_RUNNING BIT_0 + +/* B28_Y2_ASF_HOST_COM 32 bit ASF Host Communication Reg */ +/* This register is used by the ASF firmware */ +#define Y2_ASF_CLR_ASFI BIT_1 /* Clear host IRQ */ +#define Y2_ASF_HOST_IRQ BIT_0 /* Issue an IRQ to HOST system */ + +/* STAT_CTRL 32 bit Status BMU control register (Yukon-2 only) */ +#define SC_STAT_CLR_IRQ BIT_4 /* Status Burst IRQ clear */ +#define SC_STAT_OP_ON BIT_3 /* Operational Mode On */ +#define SC_STAT_OP_OFF BIT_2 /* Operational Mode Off */ +#define SC_STAT_RST_CLR BIT_1 /* Clear Status Unit Reset (Enable) */ +#define SC_STAT_RST_SET BIT_0 /* Set Status Unit Reset */ + +/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */ +#define GMC_SEC_RST BIT_15 /* MAC SEC RST */ +#define GMC_SEC_RST_OFF BIT_14 /* MAC SEC RST Off */ +#define GMC_BYP_MACSECRX_ON BIT_13 /* Bypass MAC SEC RX */ +#define GMC_BYP_MACSECRX_OFF BIT_12 /* Bypass MAC SEC RX Off */ +#define GMC_BYP_MACSECTX_ON BIT_11 /* Bypass MAC SEC TX */ +#define GMC_BYP_MACSECTX_OFF BIT_10 /* Bypass MAC SEC TX Off */ +#define GMC_BYP_RETR_ON BIT_9 /* Bypass MAC retransmit FIFO On */ +#define GMC_BYP_RETR_OFF BIT_8 /* Bypass MAC retransmit FIFO Off */ +#define GMC_H_BURST_ON BIT_7 /* Half Duplex Burst Mode On */ +#define GMC_H_BURST_OFF BIT_6 /* Half Duplex Burst Mode Off */ +#define GMC_F_LOOPB_ON BIT_5 /* FIFO Loopback On */ +#define GMC_F_LOOPB_OFF BIT_4 /* FIFO Loopback Off */ +#define GMC_PAUSE_ON BIT_3 /* Pause On */ +#define GMC_PAUSE_OFF BIT_2 /* Pause Off */ +#define GMC_RST_CLR BIT_1 /* Clear GMAC Reset */ +#define GMC_RST_SET BIT_0 /* Set GMAC Reset */ + +/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ +#define GPC_SEL_BDT BIT_28 /* Select Bi-Dir. Transfer for MDC/MDIO */ +#define GPC_INT_POL BIT_27 /* IRQ Polarity is Active Low */ +#define GPC_75_OHM BIT_26 /* Use 75 Ohm Termination instead of 50 */ +#define GPC_DIS_FC BIT_25 /* Disable Automatic Fiber/Copper Detection */ +#define GPC_DIS_SLEEP BIT_24 /* Disable Energy Detect */ +#define GPC_HWCFG_M_3 BIT_23 /* HWCFG_MODE[3] */ +#define GPC_HWCFG_M_2 BIT_22 /* HWCFG_MODE[2] */ +#define GPC_HWCFG_M_1 BIT_21 /* HWCFG_MODE[1] */ +#define GPC_HWCFG_M_0 BIT_20 /* HWCFG_MODE[0] */ +#define GPC_ANEG_0 BIT_19 /* ANEG[0] */ +#define GPC_ENA_XC BIT_18 /* Enable MDI crossover */ +#define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */ +#define GPC_ANEG_3 BIT_16 /* ANEG[3] */ +#define GPC_ANEG_2 BIT_15 /* ANEG[2] */ +#define GPC_ANEG_1 BIT_14 /* ANEG[1] */ +#define GPC_ENA_PAUSE BIT_13 /* Enable Pause (SYM_OR_REM) */ +#define GPC_PHYADDR_4 BIT_12 /* Bit 4 of Phy Addr */ +#define GPC_PHYADDR_3 BIT_11 /* Bit 3 of Phy Addr */ +#define GPC_PHYADDR_2 BIT_10 /* Bit 2 of Phy Addr */ +#define GPC_PHYADDR_1 BIT_9 /* Bit 1 of Phy Addr */ +#define GPC_PHYADDR_0 BIT_8 /* Bit 0 of Phy Addr */ +#define GPC_RST_CLR BIT_1 /* Clear GPHY Reset */ +#define GPC_RST_SET BIT_0 /* Set GPHY Reset */ + +/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */ +/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */ +#define GM_IS_RX_CO_OV BIT_5 /* Receive Counter Overflow IRQ */ +#define GM_IS_TX_CO_OV BIT_4 /* Transmit Counter Overflow IRQ */ +#define GM_IS_TX_FF_UR BIT_3 /* Transmit FIFO Underrun */ +#define GM_IS_TX_COMPL BIT_2 /* Frame Transmission Complete */ +#define GM_IS_RX_FF_OR BIT_1 /* Receive FIFO Overrun */ +#define GM_IS_RX_COMPL BIT_0 /* Frame Reception Complete */ + +#define GMAC_DEF_MSK (GM_IS_RX_CO_OV | GM_IS_TX_CO_OV | GM_IS_TX_FF_UR) + +// GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) +#define GMLC_RST_CLR BIT_1 // Clear GMAC Link Reset +#define GMLC_RST_SET BIT_0 // Set GMAC Link Reset + +#define MSK_PORT_A 0 +#define MSK_PORT_B 1 + +// Register access macros +#define CSR_WRITE_4(sc, reg, val) MmioWrite32 ((sc)->RegBase + (reg), (val)) +#define CSR_WRITE_2(sc, reg, val) MmioWrite16 ((sc)->RegBase + (reg), (val)) +#define CSR_WRITE_1(sc, reg, val) MmioWrite8 ((sc)->RegBase + (reg), (val)) + +#define CSR_READ_4(sc, reg) MmioRead32 ((sc)->RegBase + (reg)) +#define CSR_READ_2(sc, reg) MmioRead16 ((sc)->RegBase + (reg)) +#define CSR_READ_1(sc, reg) MmioRead8 ((sc)->RegBase + (reg)) + +#define CSR_PCI_WRITE_4(sc, reg, val) MmioWrite32 ((sc)->RegBase + Y2_CFG_SPC + (reg), (val)) +#define CSR_PCI_WRITE_2(sc, reg, val) MmioWrite16 ((sc)->RegBase + Y2_CFG_SPC + (reg), (val)) +#define CSR_PCI_WRITE_1(sc, reg, val) MmioWrite8 ((sc)->RegBase + Y2_CFG_SPC + (reg), (val)) + +#define CSR_PCI_READ_4(sc, reg) MmioRead32 ((sc)->RegBase + Y2_CFG_SPC + (reg)) +#define CSR_PCI_READ_2(sc, reg) MmioRead16 ((sc)->RegBase + Y2_CFG_SPC + (reg)) +#define CSR_PCI_READ_1(sc, reg) MmioRead8 ((sc)->RegBase + Y2_CFG_SPC + (reg)) + +#define GMAC_REG(port, reg) ((BASE_GMAC_1 + (port) * (BASE_GMAC_2 - BASE_GMAC_1)) | (reg)) +#define GMAC_WRITE_2(sc, port, reg, val) CSR_WRITE_2 ((sc), GMAC_REG((port), (reg)), (val)) +#define GMAC_READ_2(sc, port, reg) CSR_READ_2 ((sc), GMAC_REG((port), (reg))) + +// GPHY address (bits 15..11 of SMI control reg) +#define PHY_ADDR_MARV 0 + +#define MSK_ADDR_LO(x) ((UINT64) (x) & 0xffffffffUL) +#define MSK_ADDR_HI(x) ((UINT64) (x) >> 32) + +// PCI Status error definitions (not all of these are defined in MdePkg/Include/IndustryStandard/Pci22.h +#define PCIM_STATUS_CAPPRESENT 0x0010 +#define PCIM_STATUS_66CAPABLE 0x0020 +#define PCIM_STATUS_BACKTOBACK 0x0080 +#define PCIM_STATUS_PERRREPORT 0x0100 +#define PCIM_STATUS_SEL_FAST 0x0000 +#define PCIM_STATUS_SEL_MEDIMUM 0x0200 +#define PCIM_STATUS_SEL_SLOW 0x0400 +#define PCIM_STATUS_SEL_MASK 0x0600 +#define PCIM_STATUS_STABORT 0x0800 +#define PCIM_STATUS_RTABORT 0x1000 +#define PCIM_STATUS_RMABORT 0x2000 +#define PCIM_STATUS_SERR 0x4000 +#define PCIM_STATUS_PERR 0x8000 + +// +// At first I guessed 8 bytes, the size of a single descriptor, would be +// required alignment constraints. But, it seems that Yukon II have 4096 +// bytes boundary alignment constraints. +// +#define MSK_RING_ALIGN 4096 +#define MSK_STAT_ALIGN 4096 + +// Rx descriptor data structure +struct msk_rx_desc { + UINT32 msk_addr; + UINT32 msk_control; +}; + +// Tx descriptor data structure +struct msk_tx_desc { + UINT32 msk_addr; + UINT32 msk_control; +}; + +// Status descriptor data structure +struct msk_stat_desc { + UINT32 msk_status; + UINT32 msk_control; +}; + +// Mask and shift value to get Tx async queue status for port 1 +#define STLE_TXA1_MSKL 0x00000fff +#define STLE_TXA1_SHIFTL 0 + +// Mask and shift value to get Tx sync queue status for port 1 +#define STLE_TXS1_MSKL 0x00fff000 +#define STLE_TXS1_SHIFTL 12 + +// Mask and shift value to get Tx async queue status for port 2 +#define STLE_TXA2_MSKL 0xff000000 +#define STLE_TXA2_SHIFTL 24 +#define STLE_TXA2_MSKH 0x000f +// This one shifts up +#define STLE_TXA2_SHIFTH 8 + +// Mask and shift value to get Tx sync queue status for port 2 +#define STLE_TXS2_MSKL 0x00000000 +#define STLE_TXS2_SHIFTL 0 +#define STLE_TXS2_MSKH 0xfff0 +#define STLE_TXS2_SHIFTH 4 + +// YUKON-2 bit values +#define HW_OWNER 0x80000000 +#define SW_OWNER 0x00000000 + +#define PU_PUTIDX_VALID 0x10000000 + +// YUKON-2 Control flags +#define UDPTCP 0x00010000 +#define CALSUM 0x00020000 +#define WR_SUM 0x00040000 +#define INIT_SUM 0x00080000 +#define LOCK_SUM 0x00100000 +#define INS_VLAN 0x00200000 +#define FRC_STAT 0x00400000 +#define EOP 0x00800000 + +#define TX_LOCK 0x01000000 +#define BUF_SEND 0x02000000 +#define PACKET_SEND 0x04000000 + +#define NO_WARNING 0x40000000 +#define NO_UPDATE 0x80000000 + +// YUKON-2 Rx/Tx opcodes defines +#define OP_TCPWRITE 0x11000000 +#define OP_TCPSTART 0x12000000 +#define OP_TCPINIT 0x14000000 +#define OP_TCPLCK 0x18000000 +#define OP_TCPCHKSUM OP_TCPSTART +#define OP_TCPIS (OP_TCPINIT | OP_TCPSTART) +#define OP_TCPLW (OP_TCPLCK | OP_TCPWRITE) +#define OP_TCPLSW (OP_TCPLCK | OP_TCPSTART | OP_TCPWRITE) +#define OP_TCPLISW (OP_TCPLCK | OP_TCPINIT | OP_TCPSTART | OP_TCPWRITE) +#define OP_ADDR64 0x21000000 +#define OP_VLAN 0x22000000 +#define OP_ADDR64VLAN (OP_ADDR64 | OP_VLAN) +#define OP_LRGLEN 0x24000000 +#define OP_LRGLENVLAN (OP_LRGLEN | OP_VLAN) +#define OP_MSS 0x28000000 +#define OP_MSSVLAN (OP_MSS | OP_VLAN) +#define OP_BUFFER 0x40000000 +#define OP_PACKET 0x41000000 +#define OP_LARGESEND 0x43000000 + +// YUKON-2 STATUS opcodes defines +#define OP_RXSTAT 0x60000000 +#define OP_RXTIMESTAMP 0x61000000 +#define OP_RXVLAN 0x62000000 +#define OP_RXCHKS 0x64000000 +#define OP_RXCHKSVLAN (OP_RXCHKS | OP_RXVLAN) +#define OP_RXTIMEVLAN (OP_RXTIMESTAMP | OP_RXVLAN) +#define OP_RSS_HASH 0x65000000 +#define OP_TXINDEXLE 0x68000000 + +// YUKON-2 SPECIAL opcodes defines +#define OP_PUTIDX 0x70000000 + +#define STLE_OP_MASK 0xff000000 +#define STLE_CSS_MASK 0x00ff0000 +#define STLE_LEN_MASK 0x0000ffff + +// CSS defined in status LE(valid for descriptor V2 format) +#define CSS_TCPUDP_CSUM_OK 0x00800000 +#define CSS_UDP 0x00400000 +#define CSS_TCP 0x00200000 +#define CSS_IPFRAG 0x00100000 +#define CSS_IPV6 0x00080000 +#define CSS_IPV4_CSUM_OK 0x00040000 +#define CSS_IPV4 0x00020000 +#define CSS_PORT 0x00010000 + +// Descriptor Bit Definition +// TxCtrl Transmit Buffer Control Field +// RxCtrl Receive Buffer Control Field +#define BMU_OWN BIT_31 // OWN bit: 0=host/1=BMU +#define BMU_STF BIT_30 // Start of Frame +#define BMU_EOF BIT_29 // End of Frame +#define BMU_IRQ_EOB BIT_28 // Req "End of Buffer" IRQ +#define BMU_IRQ_EOF BIT_27 // Req "End of Frame" IRQ +// TxCtrl specific bits +#define BMU_STFWD BIT_26 // (Tx) Store & Forward Frame +#define BMU_NO_FCS BIT_25 // (Tx) Disable MAC FCS (CRC) generation +#define BMU_SW BIT_24 // (Tx) 1 bit res. for SW use +// RxCtrl specific bits +#define BMU_DEV_0 BIT_26 // (Rx) Transfer data to Dev0 +#define BMU_STAT_VAL BIT_25 // (Rx) Rx Status Valid +#define BMU_TIST_VAL BIT_24 // (Rx) Rx TimeStamp Valid +// Bit 23..16: BMU Check Opcodes +#define BMU_CHECK (0x55<<16) // Default BMU check +#define BMU_TCP_CHECK (0x56<<16) // Descr with TCP ext +#define BMU_UDP_CHECK (0x57<<16) // Descr with UDP ext (YUKON only) +#define BMU_BBC 0xffff // Bit 15.. 0: Buffer Byte Counter + +#define MSK_TX_RING_CNT 512 +#define MSK_RX_RING_CNT 512 +#define MSK_RX_BUF_ALIGN 8 +#define MSK_JUMBO_RX_RING_CNT MSK_RX_RING_CNT +#define MSK_STAT_RING_CNT 512 +#define MSK_MAXTXSEGS 32 +#define MSK_TSO_MAXSGSIZE 4096 +#define MSK_TSO_MAXSIZE (65535 + sizeof (struct ether_vlan_header)) + +/* + * It seems that the hardware requires extra decriptors(LEs) to offload + * TCP/UDP checksum, VLAN hardware tag inserstion and TSO. + * + * 1 descriptor for TCP/UDP checksum offload. + * 1 descriptor VLAN hardware tag insertion. + * 1 descriptor for TSO(TCP Segmentation Offload) + * 1 descriptor for 64bits DMA : Not applicatable due to the use of + * BUS_SPACE_MAXADDR_32BIT in parent DMA tag creation. + */ +#define MSK_RESERVED_TX_DESC_CNT 3 + +/* + * Jumbo buffer stuff. Note that we must allocate more jumbo + * buffers than there are descriptors in the receive ring. This + * is because we don't know how long it will take for a packet + * to be released after we hand it off to the upper protocol + * layers. To be safe, we allocate 1.5 times the number of + * receive descriptors. + */ +/*#define MSK_JUMBO_FRAMELEN 9022 +#define MSK_JUMBO_MTU (MSK_JUMBO_FRAMELEN-ETHER_HDR_LEN-ETHER_CRC_LEN) +#define MSK_MAX_FRAMELEN \ + (ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN - ETHER_CRC_LEN) +#define MSK_MIN_FRAMELEN (ETHER_MIN_LEN - ETHER_CRC_LEN) +*/ + +#define PAGE_SIZE 0x1000 +#define BYTES_TO_PAGES(BYTES) ((((BYTES) - 1) / PAGE_SIZE) + 1) +#define htole32(x) (x) // All UEFI platforms are little endian +#define le32toh(x) (x) +#define ACPI_SPECFLAG_PREFETCHABLE 0x06 +#define TX_MBUF_SIGNATURE SIGNATURE_32 ('t','x','m','b') +#define RX_MBUF_SIGNATURE SIGNATURE_32 ('r','x','m','b') +#define ETHER_CRC_POLY_LE 0xedb88320 +#define ETHER_CRC_POLY_BE 0x04c11db6 +//#define JUMBO_RX_MBUF_SIGNATURE SIGNATURE_32('j','r','x','m') + +typedef struct { + VOID *Buf; + UINTN Length; +} MSK_SYSTEM_BUF; + +typedef struct { + UINTN Signature; + LIST_ENTRY Link; + MSK_SYSTEM_BUF SystemBuf; +} MSK_LINKED_SYSTEM_BUF; + +typedef struct { + VOID *Buf; + UINTN Length; + VOID *DmaMapping; +} MSK_DMA_BUF; + +typedef struct { + UINTN Signature; + LIST_ENTRY Link; + MSK_DMA_BUF DmaBuf; +} MSK_LINKED_DMA_BUF; + +struct msk_txdesc { + MSK_DMA_BUF tx_m; + struct msk_tx_desc *tx_le; +}; + +struct msk_rxdesc { + MSK_DMA_BUF rx_m; + struct msk_rx_desc *rx_le; +}; + +struct msk_chain_data { + struct msk_txdesc msk_txdesc[MSK_TX_RING_CNT]; + struct msk_rxdesc msk_rxdesc[MSK_RX_RING_CNT]; + void *msk_tx_ring_map; + void *msk_rx_ring_map; + // struct msk_rxdesc msk_jumbo_rxdesc[MSK_JUMBO_RX_RING_CNT]; + INTN msk_tx_prod; + INTN msk_tx_cons; + INTN msk_tx_cnt; + INTN msk_tx_put; + INTN msk_rx_cons; + INTN msk_rx_prod; + INTN msk_rx_putwm; +}; + +struct msk_ring_data { + struct msk_tx_desc *msk_tx_ring; + EFI_PHYSICAL_ADDRESS msk_tx_ring_paddr; + struct msk_rx_desc *msk_rx_ring; + EFI_PHYSICAL_ADDRESS msk_rx_ring_paddr; + // struct msk_rx_desc *msk_jumbo_rx_ring; + // EFI_PHYSICAL_ADDRESS msk_jumbo_rx_ring_paddr; +}; + +#define MSK_TX_RING_ADDR(sc, i) \ + ((sc)->msk_rdata.msk_tx_ring_paddr + sizeof (struct msk_tx_desc) * (i)) +#define MSK_RX_RING_ADDR(sc, i) \ + ((sc)->msk_rdata.msk_rx_ring_paddr + sizeof (struct msk_rx_desc) * (i)) + +#define MSK_TX_RING_SZ (sizeof (struct msk_tx_desc) * MSK_TX_RING_CNT) +#define MSK_RX_RING_SZ (sizeof (struct msk_rx_desc) * MSK_RX_RING_CNT) +#define MSK_JUMBO_RX_RING_SZ (sizeof (struct msk_rx_desc) * MSK_JUMBO_RX_RING_CNT) +#define MSK_STAT_RING_SZ (sizeof (struct msk_stat_desc) * MSK_STAT_RING_CNT) + +#define MSK_INC(x, y) ((x) = (x + 1) % y) + +#define MSK_PCI_BUS 0 +#define MSK_PCIX_BUS 1 +#define MSK_PEX_BUS 2 + +#define MSK_PROC_DEFAULT (MSK_RX_RING_CNT / 2) +#define MSK_PROC_MIN 30 +#define MSK_PROC_MAX (MSK_RX_RING_CNT - 1) + +#define MSK_INT_HOLDOFF_DEFAULT 100 + +#define MSK_TX_TIMEOUT 5 +#define MSK_PUT_WM 10 + +/* Forward decl. */ +struct msk_if_softc; + +struct msk_hw_stats { + /* Rx stats. */ + UINT32 rx_ucast_frames; + UINT32 rx_bcast_frames; + UINT32 rx_pause_frames; + UINT32 rx_mcast_frames; + UINT32 rx_crc_errs; + UINT32 rx_spare1; + UINT64 rx_good_octets; + UINT64 rx_bad_octets; + UINT32 rx_runts; + UINT32 rx_runt_errs; + UINT32 rx_pkts_64; + UINT32 rx_pkts_65_127; + UINT32 rx_pkts_128_255; + UINT32 rx_pkts_256_511; + UINT32 rx_pkts_512_1023; + UINT32 rx_pkts_1024_1518; + UINT32 rx_pkts_1519_max; + UINT32 rx_pkts_too_long; + UINT32 rx_pkts_jabbers; + UINT32 rx_spare2; + UINT32 rx_fifo_oflows; + UINT32 rx_spare3; + /* Tx stats. */ + UINT32 tx_ucast_frames; + UINT32 tx_bcast_frames; + UINT32 tx_pause_frames; + UINT32 tx_mcast_frames; + UINT64 tx_octets; + UINT32 tx_pkts_64; + UINT32 tx_pkts_65_127; + UINT32 tx_pkts_128_255; + UINT32 tx_pkts_256_511; + UINT32 tx_pkts_512_1023; + UINT32 tx_pkts_1024_1518; + UINT32 tx_pkts_1519_max; + UINT32 tx_spare1; + UINT32 tx_colls; + UINT32 tx_late_colls; + UINT32 tx_excess_colls; + UINT32 tx_multi_colls; + UINT32 tx_single_colls; + UINT32 tx_underflows; +}; + +/* Softc for the Marvell Yukon II controller. */ +struct msk_softc { + UINT32 RegBase; + UINT64 OriginalPciAttributes; + UINT8 msk_hw_id; + UINT8 msk_hw_rev; + UINT8 msk_bustype; + UINT8 msk_num_port; + INTN msk_expcap; + // INTN msk_pcixcap; + INTN msk_ramsize; /* amount of SRAM on NIC */ + UINT32 msk_pmd; /* physical media type */ + UINT32 msk_intrmask; + UINT32 msk_intrhwemask; + UINT32 msk_pflags; + INTN msk_clock; + struct msk_if_softc *msk_if[2]; + INTN msk_txqsize; + INTN msk_rxqsize; + INTN msk_txqstart[2]; + INTN msk_txqend[2]; + INTN msk_rxqstart[2]; + INTN msk_rxqend[2]; + void *msk_stat_map; + struct msk_stat_desc *msk_stat_ring; + EFI_PHYSICAL_ADDRESS msk_stat_ring_paddr; + INTN msk_int_holdoff; + INTN msk_process_limit; + INTN msk_stat_cons; + LIST_ENTRY TransmitQueueHead; + LIST_ENTRY TransmitFreeQueueHead; + LIST_ENTRY ReceiveQueueHead; + EFI_EVENT Timer; +}; + +#define MSK_USECS(sc, us) ((sc)->msk_clock * (us)) + +/* Softc for each logical interface. */ +struct msk_if_softc { + // INT32 msk_port; /* port # on controller */ + struct msk_mii_data msk_md; + struct mii_data mii_d; + INTN msk_framesize; + INTN msk_phytype; + INTN msk_phyaddr; + UINT32 msk_flags; +#define MSK_FLAG_MSI 0x0001 +#define MSK_FLAG_FASTETHER 0x0004 +#define MSK_FLAG_JUMBO 0x0008 +#define MSK_FLAG_JUMBO_NOCSUM 0x0010 +#define MSK_FLAG_RAMBUF 0x0020 +#define MSK_FLAG_DESCV2 0x0040 +#define MSK_FLAG_AUTOTX_CSUM 0x0080 +#define MSK_FLAG_NOHWVLAN 0x0100 +#define MSK_FLAG_NORXCHK 0x0200 +#define MSK_FLAG_NORX_CSUM 0x0400 +#define MSK_FLAG_SUSPEND 0x2000 +#define MSK_FLAG_DETACH 0x4000 +#define MSK_FLAG_LINK 0x8000 + // INTN msk_watchdog_timer; + UINT32 msk_txq; /* Tx. Async Queue offset */ + UINT32 msk_txsq; /* Tx. Syn Queue offset */ + UINT32 msk_rxq; /* Rx. Qeueue offset */ + struct msk_chain_data msk_cdata; + struct msk_ring_data msk_rdata; + struct msk_hw_stats msk_stats; + EFI_MAC_ADDRESS MacAddress; +}; + +#define MSK_TIMEOUT 1000 +#define MSK_PHY_POWERUP 1 +#define MSK_PHY_POWERDOWN 0 diff --git a/Drivers/Net/MarvellYukonDxe/miivar.h b/Drivers/Net/MarvellYukonDxe/miivar.h new file mode 100644 index 0000000..62607f3 --- /dev/null +++ b/Drivers/Net/MarvellYukonDxe/miivar.h @@ -0,0 +1,198 @@ +/** <at> file +* Media Independent Interface configuration definitions. Ported from FreeBSD. +* +* Copyright (c) 2011-2016, ARM Limited. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ +/*- + * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, + * NASA Ames Research Center. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the NetBSD + * Foundation, Inc. and its contributors. + * 4. Neither the name of The NetBSD Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD: src/sys/dev/mii/miivar.h,v 1.21.10.1.4.1 2010/06/14 02:09:06 kensmith Exp $ + */ + +#ifndef _DEV_MII_MIIVAR_H_ +#define _DEV_MII_MIIVAR_H_ + +/* + * Callbacks from MII layer into network interface device driver. + */ +INTN msk_phy_readreg (INTN, INTN); +INTN msk_phy_writereg (INTN, INTN, INTN); +void msk_miibus_statchg (INTN); + +/* + * A network interface driver has one of these structures in its softc. + * It is the interface from the network interface driver to the MII + * layer. + */ +struct mii_data { + /* + * PHY driver fills this in with active media status. + */ + INTN mii_media_status; + INTN mii_media_active; +}; + +/* + * Requests that can be made to the downcall. + */ +#define MII_TICK 1 /* once-per-second tick */ +#define MII_MEDIACHG 2 /* user changed media; perform the switch */ +#define MII_POLLSTAT 3 /* user requested media status; fill it in */ + +/* + * Each PHY driver's softc has one of these as the first member. + * XXX This would be better named "phy_softc", but this is the name + * XXX BSDI used, and we would like to have the same interface. + */ +struct mii_softc { + struct mii_data *mii_pdata; /* pointer to parent's mii_data */ + + INTN mii_flags; /* misc. flags; see below */ + INTN mii_capabilities; /* capabilities from BMSR */ + INTN mii_extcapabilities; /* extended capabilities */ + INTN mii_ticks; /* MII_TICK counter */ + INTN mii_anegticks; /* ticks before retrying aneg */ + INTN mii_media_active; /* last active media */ + INTN mii_media_status; /* last active status */ +}; + +/* mii_flags */ +#define MIIF_INITDONE 0x0001 /* has been initialized (mii_data) */ +#define MIIF_NOISOLATE 0x0002 /* do not isolate the PHY */ +#define MIIF_NOLOOP 0x0004 /* no loopback capability */ +#define MIIF_AUTOTSLEEP 0x0010 /* use tsleep(), not callout() */ +#define MIIF_HAVEFIBER 0x0020 /* from parent: has fiber interface */ +#define MIIF_HAVE_GTCR 0x0040 /* has 100base-T2/1000base-T CR */ +#define MIIF_IS_1000X 0x0080 /* is a 1000BASE-X device */ +#define MIIF_DOPAUSE 0x0100 /* advertise PAUSE capability */ +#define MIIF_IS_HPNA 0x0200 /* is a HomePNA device */ +#define MIIF_FORCEANEG 0x0400 /* force auto-negotiation */ + +/* Default mii_anegticks values */ +#define MII_ANEGTICKS 5 +#define MII_ANEGTICKS_GIGE 17 + +#define MIIF_INHERIT_MASK (MIIF_NOISOLATE|MIIF_NOLOOP|MIIF_AUTOTSLEEP) + +#define MII_OUI_MARVELL 0x005043 +#define MII_OUI_xxMARVELL 0x000ac2 + +#define MII_MODEL_MARVELL_E1000 0x0000 +#define MII_MODEL_MARVELL_E1011 0x0002 +#define MII_MODEL_MARVELL_E1000_3 0x0003 +#define MII_MODEL_MARVELL_E1000S 0x0004 +#define MII_MODEL_MARVELL_E1000_5 0x0005 +#define MII_MODEL_MARVELL_E1000_6 0x0006 +#define MII_MODEL_MARVELL_E3082 0x0008 +#define MII_MODEL_MARVELL_E1112 0x0009 +#define MII_MODEL_MARVELL_E1149 0x000b +#define MII_MODEL_MARVELL_E1111 0x000c +#define MII_MODEL_MARVELL_E1116 0x0021 +#define MII_MODEL_MARVELL_E1116R 0x0024 +#define MII_MODEL_MARVELL_E1118 0x0022 +#define MII_MODEL_MARVELL_E3016 0x0026 +#define MII_MODEL_MARVELL_PHYG65G 0x0027 +#define MII_MODEL_xxMARVELL_E1000 0x0000 +#define MII_MODEL_xxMARVELL_E1011 0x0002 +#define MII_MODEL_xxMARVELL_E1000_3 0x0003 +#define MII_MODEL_xxMARVELL_E1000_5 0x0005 +#define MII_MODEL_xxMARVELL_E1111 0x000c + +#define MII_STR_MARVELL_E1000 "Marvell 88E1000 Gigabit PHY" +#define MII_STR_MARVELL_E1011 "Marvell 88E1011 Gigabit PHY" +#define MII_STR_MARVELL_E1000_3 "Marvell 88E1000_3 Gigabit PHY" +#define MII_STR_MARVELL_E1000S "Marvell 88E1000S Gigabit PHY" +#define MII_STR_MARVELL_E1000_5 "Marvell 88E1000_5 Gigabit PHY" +#define MII_STR_MARVELL_E1000_6 "Marvell 88E1000_6 Gigabit PHY" +#define MII_STR_MARVELL_E3082 "Marvell 88E3082 10/100 Fast Ethernet PHY" +#define MII_STR_MARVELL_E1112 "Marvell 88E1112 Gigabit PHY" +#define MII_STR_MARVELL_E1149 "Marvell 88E1149 Gigabit PHY" +#define MII_STR_MARVELL_E1111 "Marvell 88E1111 Gigabit PHY" +#define MII_STR_MARVELL_E1116 "Marvell 88E1116 Gigabit PHY" +#define MII_STR_MARVELL_E1116R "Marvell 88E1116R Gigabit PHY" +#define MII_STR_MARVELL_E1118 "Marvell 88E1118 Gigabit PHY" +#define MII_STR_MARVELL_E3016 "Marvell 88E3016 10/100 Fast Ethernet PHY" +#define MII_STR_MARVELL_PHYG65G "Marvell PHYG65G Gigabit PHY" +#define MII_STR_xxMARVELL_E1000 "Marvell 88E1000 Gigabit PHY" +#define MII_STR_xxMARVELL_E1011 "Marvell 88E1011 Gigabit PHY" +#define MII_STR_xxMARVELL_E1000_3 "Marvell 88E1000_3 Gigabit PHY" +#define MII_STR_xxMARVELL_E1000_5 "Marvell 88E1000_5 Gigabit PHY" +#define MII_STR_xxMARVELL_E1111 "Marvell 88E1111 Gigabit PHY" + +/* + * Used to attach a PHY to a parent. + */ +struct mii_attach_args { + struct mii_data *mii_data; /* pointer to parent data */ + INTN mii_id1; /* PHY ID register 1 */ + INTN mii_id2; /* PHY ID register 2 */ +}; + +/* + * Used to match a PHY. + */ +struct mii_phydesc { + UINT32 mpd_oui; /* the PHY's OUI */ + UINT32 mpd_model; /* the PHY's model */ + const CHAR8 *mpd_name; /* the PHY's name */ +}; +#define MII_PHY_DESC(a, b) { MII_OUI_ ## a, MII_MODEL_ ## a ## _ ## b, MII_STR_ ## a ## _ ## b } +#define MII_PHY_END { 0, 0, NULL } + +#define PHY_READ(p, r) msk_phy_readreg ((p)->mmd->port, (r)) + +#define PHY_WRITE(p, r, v) msk_phy_writereg ((p)->mmd->port, (r), (v)) + +struct msk_mii_data { + INTN port; + UINT32 pmd; + INTN mii_flags; +}; + +EFI_STATUS e1000_probe_and_attach (struct mii_data *mii, const struct msk_mii_data *mmd); +void e1000phy_tick (void); +void e1000phy_mediachg (void); + +#endif /* _DEV_MII_MIIVAR_H_ */