When some type raid cards is not healthy, such as Broadcom 3108/3508 raid card, board will enter endless loop in BmRepairAllControllers() and can't show configuration formset which need to repair raid card.
Ming Huang (1): MdeModulePkg/UefiBootManagerLib: Fix raid card repair fail issue
.../UefiBootManagerLib/UefiBootManagerLib.inf | 2 + .../UefiBootManagerLib/BmDriverHealth.c | 48 ++++++++++++++++++- 2 files changed, 49 insertions(+), 1 deletion(-)
When some type raid cards is not healthy, such as Broadcom 3108/3508 raid card, board will enter endless loop in BmRepairAllControllers() and can't show configuration formset which need to repair raid card.
DriverHealthManagerDxe is added to platform dsc/fdf, driver health manager menu can show drivers which are not healthy, but raid card can not be repaired by the menus under Device Manager. This modification of BmRepairAllControllers() can show configuration formset for repair when booting an option.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ming Huang ming.huang@linaro.org --- MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf | 2 + MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c | 48 +++++++++++++++++++- 2 files changed, 49 insertions(+), 1 deletion(-)
diff --git a/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf b/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf index 228b91033695..b9f96c763ff6 100644 --- a/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf +++ b/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf @@ -89,6 +89,8 @@ [Guids] gEfiDiskInfoIdeInterfaceGuid ## SOMETIMES_CONSUMES ## GUID gEfiDiskInfoScsiInterfaceGuid ## SOMETIMES_CONSUMES ## GUID gEfiDiskInfoSdMmcInterfaceGuid ## SOMETIMES_CONSUMES ## GUID + gEfiHiiDriverHealthFormsetGuid + gEfiHiiPlatformSetupFormsetGuid
[Protocols] gEfiPciRootBridgeIoProtocolGuid ## CONSUMES diff --git a/MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c b/MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c index ecd01bbb81e3..fd47651ec937 100644 --- a/MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c +++ b/MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c @@ -421,6 +421,47 @@ EfiBootManagerFreeDriverHealthInfo ( return gBS->FreePool (DriverHealthInfo); }
+STATIC +VOID +ShowConfigureForm ( + EFI_FORM_BROWSER2_PROTOCOL *FormBrowser2, + EFI_BOOT_MANAGER_DRIVER_HEALTH_INFO *DriverHealthInfo + ) +{ + EFI_STATUS Status; + EFI_HII_HANDLE FormHiiHandle; + EFI_DRIVER_HEALTH_STATUS HealthStatus; + + if (DriverHealthInfo != NULL) { + Status = DriverHealthInfo->DriverHealth->GetHealthStatus ( + DriverHealthInfo->DriverHealth, + DriverHealthInfo->ControllerHandle, + DriverHealthInfo->ChildHandle, + &HealthStatus, + NULL, + &FormHiiHandle + ); + if (!EFI_ERROR (Status) && + (HealthStatus == EfiDriverHealthStatusConfigurationRequired) && + (FormHiiHandle != NULL)) { + Status = FormBrowser2->SendForm ( + FormBrowser2, + &FormHiiHandle, + 1, + &gEfiHiiPlatformSetupFormsetGuid, + 0, + NULL, + NULL + ); + if (EFI_ERROR (Status)) { + Print (L"Show configurae menu:%r\n", Status); + } + } + } + + return; +} + /** Repair all the controllers according to the Driver Health status queried.
@@ -434,6 +475,7 @@ BmRepairAllControllers ( { EFI_STATUS Status; EFI_BOOT_MANAGER_DRIVER_HEALTH_INFO *DriverHealthInfo; + EFI_BOOT_MANAGER_DRIVER_HEALTH_INFO *InfoConfigurationRequired; EFI_DRIVER_HEALTH_STATUS HealthStatus; UINTN Count; UINTN Index; @@ -462,6 +504,7 @@ BmRepairAllControllers ( do { RepairRequired = FALSE; ConfigurationRequired = FALSE; + InfoConfigurationRequired = NULL;
// // Deal with Repair Required @@ -470,6 +513,7 @@ BmRepairAllControllers ( for (Index = 0; Index < Count; Index++) { if (DriverHealthInfo[Index].HealthStatus == EfiDriverHealthStatusConfigurationRequired) { ConfigurationRequired = TRUE; + InfoConfigurationRequired = &DriverHealthInfo[Index]; }
if (DriverHealthInfo[Index].HealthStatus == EfiDriverHealthStatusRepairRequired) { @@ -494,6 +538,7 @@ BmRepairAllControllers ( ); if (!EFI_ERROR (Status) && (HealthStatus == EfiDriverHealthStatusConfigurationRequired)) { ConfigurationRequired = TRUE; + InfoConfigurationRequired = &DriverHealthInfo[Index]; } } } @@ -507,12 +552,13 @@ BmRepairAllControllers ( FormBrowser2, &HiiHandles[Index], 1, - PcdGetPtr (PcdDriverHealthConfigureForm), + &gEfiHiiDriverHealthFormsetGuid, 0, NULL, NULL ); if (!EFI_ERROR (Status)) { + ShowConfigureForm (FormBrowser2, InfoConfigurationRequired); break; } }
On 9/15/2018 2:36 PM, Ming Huang wrote:
When some type raid cards is not healthy, such as Broadcom 3108/3508 raid card, board will enter endless loop in BmRepairAllControllers() and can't show configuration formset which need to repair raid card.
DriverHealthManagerDxe is added to platform dsc/fdf, driver health manager menu can show drivers which are not healthy, but raid card can not be repaired by the menus under Device Manager. This modification of BmRepairAllControllers() can show configuration formset for repair when booting an option.
I developed that driver and the driver health related code in BDS library. But I a bit forgot the details.
Can you explain why the driver health manager driver cannot handle such case?
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ming Huang ming.huang@linaro.org
MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf | 2 + MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c | 48 +++++++++++++++++++- 2 files changed, 49 insertions(+), 1 deletion(-)
diff --git a/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf b/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf index 228b91033695..b9f96c763ff6 100644 --- a/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf +++ b/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf @@ -89,6 +89,8 @@ [Guids] gEfiDiskInfoIdeInterfaceGuid ## SOMETIMES_CONSUMES ## GUID gEfiDiskInfoScsiInterfaceGuid ## SOMETIMES_CONSUMES ## GUID gEfiDiskInfoSdMmcInterfaceGuid ## SOMETIMES_CONSUMES ## GUID
- gEfiHiiDriverHealthFormsetGuid
- gEfiHiiPlatformSetupFormsetGuid
[Protocols] gEfiPciRootBridgeIoProtocolGuid ## CONSUMES diff --git a/MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c b/MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c index ecd01bbb81e3..fd47651ec937 100644 --- a/MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c +++ b/MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c @@ -421,6 +421,47 @@ EfiBootManagerFreeDriverHealthInfo ( return gBS->FreePool (DriverHealthInfo); } +STATIC +VOID +ShowConfigureForm (
- EFI_FORM_BROWSER2_PROTOCOL *FormBrowser2,
- EFI_BOOT_MANAGER_DRIVER_HEALTH_INFO *DriverHealthInfo
- )
+{
- EFI_STATUS Status;
- EFI_HII_HANDLE FormHiiHandle;
- EFI_DRIVER_HEALTH_STATUS HealthStatus;
- if (DriverHealthInfo != NULL) {
- Status = DriverHealthInfo->DriverHealth->GetHealthStatus (
DriverHealthInfo->DriverHealth,DriverHealthInfo->ControllerHandle,DriverHealthInfo->ChildHandle,&HealthStatus,NULL,&FormHiiHandle);- if (!EFI_ERROR (Status) &&
(HealthStatus == EfiDriverHealthStatusConfigurationRequired) &&(FormHiiHandle != NULL)) {Status = FormBrowser2->SendForm (FormBrowser2,&FormHiiHandle,1,&gEfiHiiPlatformSetupFormsetGuid,0,NULL,NULL);if (EFI_ERROR (Status)) {Print (L"Show configurae menu:%r\n", Status);}- }
- }
- return;
+}
- /** Repair all the controllers according to the Driver Health status queried.
@@ -434,6 +475,7 @@ BmRepairAllControllers ( { EFI_STATUS Status; EFI_BOOT_MANAGER_DRIVER_HEALTH_INFO *DriverHealthInfo;
- EFI_BOOT_MANAGER_DRIVER_HEALTH_INFO *InfoConfigurationRequired; EFI_DRIVER_HEALTH_STATUS HealthStatus; UINTN Count; UINTN Index;
@@ -462,6 +504,7 @@ BmRepairAllControllers ( do { RepairRequired = FALSE; ConfigurationRequired = FALSE;
- InfoConfigurationRequired = NULL;
// // Deal with Repair Required @@ -470,6 +513,7 @@ BmRepairAllControllers ( for (Index = 0; Index < Count; Index++) { if (DriverHealthInfo[Index].HealthStatus == EfiDriverHealthStatusConfigurationRequired) { ConfigurationRequired = TRUE;
InfoConfigurationRequired = &DriverHealthInfo[Index]; }if (DriverHealthInfo[Index].HealthStatus == EfiDriverHealthStatusRepairRequired) { @@ -494,6 +538,7 @@ BmRepairAllControllers ( ); if (!EFI_ERROR (Status) && (HealthStatus == EfiDriverHealthStatusConfigurationRequired)) { ConfigurationRequired = TRUE;
InfoConfigurationRequired = &DriverHealthInfo[Index]; } } }@@ -507,12 +552,13 @@ BmRepairAllControllers ( FormBrowser2, &HiiHandles[Index], 1,
PcdGetPtr (PcdDriverHealthConfigureForm),
&gEfiHiiDriverHealthFormsetGuid, 0, NULL, NULL ); if (!EFI_ERROR (Status)) {ShowConfigureForm (FormBrowser2, InfoConfigurationRequired); break; } }
On 9/18/2018 5:40 PM, Ni, Ruiyu wrote:
On 9/15/2018 2:36 PM, Ming Huang wrote:
When some type raid cards is not healthy, such as Broadcom 3108/3508 raid card, board will enter endless loop in BmRepairAllControllers() and can't show configuration formset which need to repair raid card.
DriverHealthManagerDxe is added to platform dsc/fdf, driver health manager menu can show drivers which are not healthy, but raid card can not be repaired by the menus under Device Manager. This modification of BmRepairAllControllers() can show configuration formset for repair when booting an option.
I developed that driver and the driver health related code in BDS library. But I a bit forgot the details.
Can you explain why the driver health manager driver cannot handle such case?
For Device Manager: When DriverHealthManagerDxe is added, I find a not healthy case of 3108/3508 raid caid that can not repair by DeviceManager menu: 1 enter the "AVAGO MegaRAID <SAS3108> Driver Health Protocal Utility" menu, 2 show a form "Press any key to continue, or 'C' to load the configuration utility" 3 Press 'C', then no more form be show. This is not enouth to repair the card. The card is not healthy after reset board. For repair card, the "AVAGO MegaRAID <SAS3108> Configuration Utility" should be show to user to change some items, then card can be repaired after reset board.
For BmRepairAllControllers(): When card is no healthy and boot an option, BmRepairAllControllers() is invoked, then show the "Driver Health Manager" menu, but Esc can not exit from this menu, and repair form can not be show, nothing can do here except reset the board.
Thanks, Ming
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ming Huang ming.huang@linaro.org
MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf | 2 + MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c | 48 +++++++++++++++++++- 2 files changed, 49 insertions(+), 1 deletion(-)
diff --git a/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf b/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf index 228b91033695..b9f96c763ff6 100644 --- a/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf +++ b/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf @@ -89,6 +89,8 @@ [Guids] gEfiDiskInfoIdeInterfaceGuid ## SOMETIMES_CONSUMES ## GUID gEfiDiskInfoScsiInterfaceGuid ## SOMETIMES_CONSUMES ## GUID gEfiDiskInfoSdMmcInterfaceGuid ## SOMETIMES_CONSUMES ## GUID + gEfiHiiDriverHealthFormsetGuid + gEfiHiiPlatformSetupFormsetGuid [Protocols] gEfiPciRootBridgeIoProtocolGuid ## CONSUMES diff --git a/MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c b/MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c index ecd01bbb81e3..fd47651ec937 100644 --- a/MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c +++ b/MdeModulePkg/Library/UefiBootManagerLib/BmDriverHealth.c @@ -421,6 +421,47 @@ EfiBootManagerFreeDriverHealthInfo ( return gBS->FreePool (DriverHealthInfo); } +STATIC +VOID +ShowConfigureForm ( + EFI_FORM_BROWSER2_PROTOCOL *FormBrowser2, + EFI_BOOT_MANAGER_DRIVER_HEALTH_INFO *DriverHealthInfo + ) +{ + EFI_STATUS Status; + EFI_HII_HANDLE FormHiiHandle; + EFI_DRIVER_HEALTH_STATUS HealthStatus;
+ if (DriverHealthInfo != NULL) { + Status = DriverHealthInfo->DriverHealth->GetHealthStatus ( + DriverHealthInfo->DriverHealth, + DriverHealthInfo->ControllerHandle, + DriverHealthInfo->ChildHandle, + &HealthStatus, + NULL, + &FormHiiHandle + ); + if (!EFI_ERROR (Status) && + (HealthStatus == EfiDriverHealthStatusConfigurationRequired) && + (FormHiiHandle != NULL)) { + Status = FormBrowser2->SendForm ( + FormBrowser2, + &FormHiiHandle, + 1, + &gEfiHiiPlatformSetupFormsetGuid, + 0, + NULL, + NULL + ); + if (EFI_ERROR (Status)) { + Print (L"Show configurae menu:%r\n", Status); + } + } + }
+ return; +}
/** Repair all the controllers according to the Driver Health status queried. @@ -434,6 +475,7 @@ BmRepairAllControllers ( { EFI_STATUS Status; EFI_BOOT_MANAGER_DRIVER_HEALTH_INFO *DriverHealthInfo; + EFI_BOOT_MANAGER_DRIVER_HEALTH_INFO *InfoConfigurationRequired; EFI_DRIVER_HEALTH_STATUS HealthStatus; UINTN Count; UINTN Index; @@ -462,6 +504,7 @@ BmRepairAllControllers ( do { RepairRequired = FALSE; ConfigurationRequired = FALSE; + InfoConfigurationRequired = NULL; // // Deal with Repair Required @@ -470,6 +513,7 @@ BmRepairAllControllers ( for (Index = 0; Index < Count; Index++) { if (DriverHealthInfo[Index].HealthStatus == EfiDriverHealthStatusConfigurationRequired) { ConfigurationRequired = TRUE; + InfoConfigurationRequired = &DriverHealthInfo[Index]; } if (DriverHealthInfo[Index].HealthStatus == EfiDriverHealthStatusRepairRequired) { @@ -494,6 +538,7 @@ BmRepairAllControllers ( ); if (!EFI_ERROR (Status) && (HealthStatus == EfiDriverHealthStatusConfigurationRequired)) { ConfigurationRequired = TRUE; + InfoConfigurationRequired = &DriverHealthInfo[Index]; } } } @@ -507,12 +552,13 @@ BmRepairAllControllers ( FormBrowser2, &HiiHandles[Index], 1, - PcdGetPtr (PcdDriverHealthConfigureForm), + &gEfiHiiDriverHealthFormsetGuid, 0, NULL, NULL ); if (!EFI_ERROR (Status)) { + ShowConfigureForm (FormBrowser2, InfoConfigurationRequired); break; } }
@@ -507,12 +552,13 @@ BmRepairAllControllers ( FormBrowser2, &HiiHandles[Index], 1,
PcdGetPtr (PcdDriverHealthConfigureForm),
&gEfiHiiDriverHealthFormsetGuid,
I still don't quite understand the changes. But the above specific change removes the PcdDriverHealthConfigureForm form pop up. Instead it pops up each driver health form one by one. Why?
0, NULL, NULL ); if (!EFI_ERROR (Status)) {
ShowConfigureForm (FormBrowser2,- InfoConfigurationRequired); break; } }
-- 2.18.0
edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On 9/26/2018 1:00 PM, Ni, Ruiyu wrote:
@@ -507,12 +552,13 @@ BmRepairAllControllers ( FormBrowser2, &HiiHandles[Index], 1,
PcdGetPtr (PcdDriverHealthConfigureForm),
&gEfiHiiDriverHealthFormsetGuid,I still don't quite understand the changes. But the above specific change removes the PcdDriverHealthConfigureForm form pop up. Instead it pops up each driver health form one by one. Why?
This change is refer to the below function: ProcessSingleControllerHealth (IntelFrameworkModulePkg/Universal/Bdsdxe/DeviceMngr/DeviceManager.c). I don't real understand it also, but it works.
0, NULL, NULL ); if (!EFI_ERROR (Status)) {
ShowConfigureForm (FormBrowser2,- InfoConfigurationRequired); break; } }
-- 2.18.0
edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On 9/28/2018 2:18 PM, Ming Huang wrote:
On 9/26/2018 1:00 PM, Ni, Ruiyu wrote:
@@ -507,12 +552,13 @@ BmRepairAllControllers ( FormBrowser2, &HiiHandles[Index], 1,
PcdGetPtr (PcdDriverHealthConfigureForm),
&gEfiHiiDriverHealthFormsetGuid,I still don't quite understand the changes. But the above specific change removes the PcdDriverHealthConfigureForm form pop up. Instead it pops up each driver health form one by one. Why?
This change is refer to the below function: ProcessSingleControllerHealth (IntelFrameworkModulePkg/Universal/Bdsdxe/DeviceMngr/DeviceManager.c). I don't real understand it also, but it works.
I am sorry. I cannot review the changes if you cannot explain it:) Fix should be based on the thoroughly understanding to the issue.
0, NULL, NULL ); if (!EFI_ERROR (Status)) {
ShowConfigureForm (FormBrowser2,- InfoConfigurationRequired); break; } }
-- 2.18.0
edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On 10/08/18 08:39, Ni, Ruiyu wrote:
On 9/28/2018 2:18 PM, Ming Huang wrote:
On 9/26/2018 1:00 PM, Ni, Ruiyu wrote:
@@ -507,12 +552,13 @@ BmRepairAllControllers ( FormBrowser2, &HiiHandles[Index], 1, - PcdGetPtr (PcdDriverHealthConfigureForm), + &gEfiHiiDriverHealthFormsetGuid,
I still don't quite understand the changes. But the above specific change removes the PcdDriverHealthConfigureForm form pop up. Instead it pops up each driver health form one by one. Why?
This change is refer to the below function: ProcessSingleControllerHealth (IntelFrameworkModulePkg/Universal/Bdsdxe/DeviceMngr/DeviceManager.c). I don't real understand it also, but it works.
I am sorry. I cannot review the changes if you cannot explain it:) Fix should be based on the thoroughly understanding to the issue.
Could it be that the RAID card driver is buggy?
Thanks Laszlo
-
Laszlo Ersek -
Ming Huang -
Ni, Ruiyu -
Ni, Ruiyu