The probe will fail if we can't get the regulators. So we have a dummy regulator for one of them don’t remember which.
So both logs in this case should fail.
/R
-----Original Message----- From: Lee Jones [mailto:lee.jones@linaro.org] Sent: den 23 oktober 2012 09:24 To: Andy Doan; linus.walleij@linaro.org; Robert MARKLUND Cc: Alexander Sack; Michael Hudson-Doyle; Ricardo Salveti; Riku Voipio; Linaro Validation Subject: Re: [Linaro-validation] Health check failures
On Mon, 22 Oct 2012, Lee Jones wrote:
Linus,
Have you seen this before?
Failed networking, but only on some boards.
Maybe you should page Robert Marklund, he worked a lot on the Snowball SMSC.
Linus
Good plan.
Robert, what say you?
You must be pretty close to the spot in code. Here's the bad log:
smsc911x: Driver version 2008-10-21 smsc911x smsc911x.0: (unregistered net_device): smsc911x_request_resources: Failed to get regulator 'vddvario' PPP generic driver version 2.4.2
Here's the good log:
smsc911x: Driver version 2008-10-21 smsc911x smsc911x.0: (unregistered net_device): smsc911x_request_resources: Failed to get regulator 'vddvario' smsc911x-mdio: probed
I haven't pulled up the code, but it looks like the probe function is the spot.
FYI - snowball06 failed once over the weekend, so the new master image on the SD card may not have helped as much as we originally thought it would.
-- Lee Jones Linaro ST-Ericsson Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
-- Lee Jones Linaro ST-Ericsson Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog