July 2023 - Linux-stable-mirror

[PATCH] r8152: Suspend USB device before shutdown when WoL is enabled

by Alexandru Gagniuc

For Wake-on-LAN to work from S5 (shutdown), the USB link must be put in U3 state. If it is not, and the host "disappears", the chip will no longer respond to WoL triggers. To resolve this, add a notifier block and register it as a reboot notifier. When WoL is enabled, work through the usb_device struct to get to the suspend function. Calling this function puts the link in the correct state for WoL to function. Cc: stable(a)vger.kernel.org Signed-off-by: Alexandru Gagniuc <alexandru.gagniuc(a)hp.com> --- drivers/net/usb/r8152.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 0999a58ca9d2..5623ca5c9142 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -20,6 +20,7 @@ #include <net/ip6_checksum.h> #include <uapi/linux/mdio.h> #include <linux/mdio.h> +#include <linux/reboot.h> #include <linux/usb/cdc.h> #include <linux/suspend.h> #include <linux/atomic.h> @@ -875,6 +876,7 @@ struct r8152 { struct delayed_work schedule, hw_phy_work; struct mii_if_info mii; struct mutex control; /* use for hw setting */ + struct notifier_block reboot_notifier; #ifdef CONFIG_PM_SLEEP struct notifier_block pm_notifier; #endif @@ -9609,6 +9611,25 @@ static bool rtl8152_supports_lenovo_macpassthru(struct usb_device *udev) return 0; } +/* Suspend realtek chip before system shutdown + * + * For Wake-on-LAN to work from S5, the USB link must be put in U3 state. If + * the host otherwise "disappears", the chip will not respond to WoL triggers. + */ +static int rtl8152_notify(struct notifier_block *nb, unsigned long code, + void *unused) +{ + struct r8152 *tp = container_of(nb, struct r8152, reboot_notifier); + struct device *dev = &tp->udev->dev; + + if (code == SYS_POWER_OFF) { + if (tp->saved_wolopts && dev->type->pm->suspend) + dev->type->pm->suspend(dev); + } + + return NOTIFY_DONE; +} + static int rtl8152_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -9791,6 +9812,9 @@ static int rtl8152_probe(struct usb_interface *intf, else device_set_wakeup_enable(&udev->dev, false); + tp->reboot_notifier.notifier_call = rtl8152_notify; + register_reboot_notifier(&tp->reboot_notifier); + netif_info(tp, probe, netdev, "%s\n", DRIVER_VERSION); return 0; @@ -9811,6 +9835,7 @@ static void rtl8152_disconnect(struct usb_interface *intf) if (tp) { rtl_set_unplug(tp); + unregister_reboot_notifier(&tp->reboot_notifier); unregister_netdev(tp->netdev); tasklet_kill(&tp->tx_tl); cancel_delayed_work_sync(&tp->hw_phy_work); -- 2.39.1

1 year, 8 months

5
11
0 0

[PATCH v2 1/3] mm: lock a vma before stack expansion

by Suren Baghdasaryan

With recent changes necessitating mmap_lock to be held for write while expanding a stack, per-VMA locks should follow the same rules and be write-locked to prevent page faults into the VMA being expanded. Add the necessary locking. Cc: stable(a)vger.kernel.org Signed-off-by: Suren Baghdasaryan <surenb(a)google.com> --- mm/mmap.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/mm/mmap.c b/mm/mmap.c index 204ddcd52625..c66e4622a557 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1977,6 +1977,8 @@ static int expand_upwards(struct vm_area_struct *vma, unsigned long address) return -ENOMEM; } + /* Lock the VMA before expanding to prevent concurrent page faults */ + vma_start_write(vma); /* * vma->vm_start/vm_end cannot change under us because the caller * is required to hold the mmap_lock in read mode. We need the @@ -2064,6 +2066,8 @@ int expand_downwards(struct vm_area_struct *vma, unsigned long address) return -ENOMEM; } + /* Lock the VMA before expanding to prevent concurrent page faults */ + vma_start_write(vma); /* * vma->vm_start/vm_end cannot change under us because the caller * is required to hold the mmap_lock in read mode. We need the -- 2.41.0.390.g38632f3daf-goog

1 year, 8 months

3
21
0 0

[PATCH] drm/shmem-helper: Reset vma->vm_ops before calling dma_buf_mmap()

by Boris Brezillon

The dma-buf backend is supposed to provide its own vm_ops, but some implementation just have nothing special to do and leave vm_ops untouched, probably expecting this field to be zero initialized (this is the case with the system_heap implementation for instance). Let's reset vma->vm_ops to NULL to keep things working with these implementations. Fixes: 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf") Cc: <stable(a)vger.kernel.org> Cc: Daniel Vetter <daniel.vetter(a)ffwll.ch> Reported-by: Roman Stratiienko <roman.stratiienko(a)globallogic.com> Signed-off-by: Boris Brezillon <boris.brezillon(a)collabora.com> --- drivers/gpu/drm/drm_gem_shmem_helper.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/drm_gem_shmem_helper.c b/drivers/gpu/drm/drm_gem_shmem_helper.c index 4ea6507a77e5..baaf0e0feb06 100644 --- a/drivers/gpu/drm/drm_gem_shmem_helper.c +++ b/drivers/gpu/drm/drm_gem_shmem_helper.c @@ -623,7 +623,13 @@ int drm_gem_shmem_mmap(struct drm_gem_shmem_object *shmem, struct vm_area_struct int ret; if (obj->import_attach) { + /* Reset both vm_ops and vm_private_data, so we don't end up with + * vm_ops pointing to our implementation if the dma-buf backend + * doesn't set those fields. + */ vma->vm_private_data = NULL; + vma->vm_ops = NULL; + ret = dma_buf_mmap(obj->dma_buf, vma, 0); /* Drop the reference drm_gem_mmap_obj() acquired.*/ -- 2.41.0

1 year, 8 months

2
5
0 0

[PATCH v3 1/2] Perform additional retries if Doorbell read returns 0

by Ranjan Kumar

The driver retries certain register reads for 3 times if the returned value is 0, this was done based on hardware specification where the controller could possibly return 0 for certain registers when there is a parallel access to some of other registers from the firmware due to BMC out of band interactions.Recently it is observed that in certain systems with increased BMC interactions, the values returned are 0 even for 3 retries (the proper value is returned between 4 to 6 retries).Hence this patch changes the retry count 3 to 30, which is a revised recommendation, to avoid the out of band conflict. Fixes: b899202901a8 ("mpt3sas: Add separate function for aero doorbell reads") Cc: stable(a)vger.kernel.org Signed-off-by: Ranjan Kumar <ranjan.kumar(a)broadcom.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 53 ++++++++++++++++------------- drivers/scsi/mpt3sas/mpt3sas_base.h | 11 +++++- 2 files changed, 39 insertions(+), 25 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 53f5492579cb..efc9bc48db6f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -196,25 +196,27 @@ module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug, /** * _base_readl_aero - retry readl for max three times. * @addr: MPT Fusion system interface register address - * - * Retry the readl() for max three times if it gets zero value + *@retry_count: max no of retry + + * Retry the readl() for max thirty times if it gets zero value * while reading the system interface register. */ + static inline u32 -_base_readl_aero(const volatile void __iomem *addr) +_base_readl_aero(const volatile void __iomem *addr, u8 retry_count) { u32 i = 0, ret_val; do { ret_val = readl(addr); i++; - } while (ret_val == 0 && i < 3); + } while (ret_val == 0 && i < retry_count); return ret_val; } static inline u32 -_base_readl(const volatile void __iomem *addr) +_base_readl(const volatile void __iomem *addr, u8 retry_count) { return readl(addr); } @@ -940,7 +942,7 @@ mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc) dump_stack(); - doorbell = ioc->base_readl(&ioc->chip->Doorbell); + doorbell = ioc->base_readl(&ioc->chip->Doorbell, READL_RETRY_COUNT); if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { mpt3sas_print_fault_code(ioc, doorbell & MPI2_DOORBELL_DATA_MASK); @@ -1617,10 +1619,10 @@ mpt3sas_base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc) u32 him_register; ioc->mask_interrupts = 1; - him_register = ioc->base_readl(&ioc->chip->HostInterruptMask); + him_register = ioc->base_readl(&ioc->chip->HostInterruptMask, READL_RETRY_SHORT_COUNT); him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK; writel(him_register, &ioc->chip->HostInterruptMask); - ioc->base_readl(&ioc->chip->HostInterruptMask); + ioc->base_readl(&ioc->chip->HostInterruptMask, READL_RETRY_SHORT_COUNT); } /** @@ -1634,7 +1636,7 @@ mpt3sas_base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc) { u32 him_register; - him_register = ioc->base_readl(&ioc->chip->HostInterruptMask); + him_register = ioc->base_readl(&ioc->chip->HostInterruptMask, READL_RETRY_SHORT_COUNT); him_register &= ~MPI2_HIM_RIM; writel(him_register, &ioc->chip->HostInterruptMask); ioc->mask_interrupts = 0; @@ -6686,7 +6688,7 @@ mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked) { u32 s, sc; - s = ioc->base_readl(&ioc->chip->Doorbell); + s = ioc->base_readl(&ioc->chip->Doorbell, READL_RETRY_COUNT); sc = s & MPI2_IOC_STATE_MASK; return cooked ? sc : s; } @@ -6760,7 +6762,8 @@ _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout) count = 0; cntdn = 1000 * timeout; do { - int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus); + int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus, + READL_RETRY_SHORT_COUNT); if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { dhsprintk(ioc, ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n", @@ -6786,7 +6789,8 @@ _base_spin_on_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout) count = 0; cntdn = 2000 * timeout; do { - int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus); + int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus, + READL_RETRY_SHORT_COUNT); if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { dhsprintk(ioc, ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n", @@ -6824,14 +6828,15 @@ _base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout) count = 0; cntdn = 1000 * timeout; do { - int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus); + int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus, + READL_RETRY_SHORT_COUNT); if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) { dhsprintk(ioc, ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n", __func__, count, timeout)); return 0; } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { - doorbell = ioc->base_readl(&ioc->chip->Doorbell); + doorbell = ioc->base_readl(&ioc->chip->Doorbell, READL_RETRY_COUNT); if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { mpt3sas_print_fault_code(ioc, doorbell); @@ -6871,7 +6876,7 @@ _base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout) count = 0; cntdn = 1000 * timeout; do { - doorbell_reg = ioc->base_readl(&ioc->chip->Doorbell); + doorbell_reg = ioc->base_readl(&ioc->chip->Doorbell, READL_RETRY_COUNT); if (!(doorbell_reg & MPI2_DOORBELL_USED)) { dhsprintk(ioc, ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n", @@ -7019,13 +7024,13 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, __le32 *mfp; /* make sure doorbell is not in use */ - if ((ioc->base_readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { + if ((ioc->base_readl(&ioc->chip->Doorbell, READL_RETRY_COUNT) & MPI2_DOORBELL_USED)) { ioc_err(ioc, "doorbell is in use (line=%d)\n", __LINE__); return -EFAULT; } /* clear pending doorbell interrupts from previous state changes */ - if (ioc->base_readl(&ioc->chip->HostInterruptStatus) & + if (ioc->base_readl(&ioc->chip->HostInterruptStatus, READL_RETRY_SHORT_COUNT) & MPI2_HIS_IOC2SYS_DB_STATUS) writel(0, &ioc->chip->HostInterruptStatus); @@ -7068,7 +7073,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, } /* read the first two 16-bits, it gives the total length of the reply */ - reply[0] = le16_to_cpu(ioc->base_readl(&ioc->chip->Doorbell) + reply[0] = le16_to_cpu(ioc->base_readl(&ioc->chip->Doorbell, READL_RETRY_COUNT) & MPI2_DOORBELL_DATA_MASK); writel(0, &ioc->chip->HostInterruptStatus); if ((_base_wait_for_doorbell_int(ioc, 5))) { @@ -7076,7 +7081,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, __LINE__); return -EFAULT; } - reply[1] = le16_to_cpu(ioc->base_readl(&ioc->chip->Doorbell) + reply[1] = le16_to_cpu(ioc->base_readl(&ioc->chip->Doorbell, READL_RETRY_COUNT) & MPI2_DOORBELL_DATA_MASK); writel(0, &ioc->chip->HostInterruptStatus); @@ -7087,10 +7092,10 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, return -EFAULT; } if (i >= reply_bytes/2) /* overflow case */ - ioc->base_readl(&ioc->chip->Doorbell); + ioc->base_readl(&ioc->chip->Doorbell, READL_RETRY_COUNT); else reply[i] = le16_to_cpu( - ioc->base_readl(&ioc->chip->Doorbell) + ioc->base_readl(&ioc->chip->Doorbell, READL_RETRY_COUNT) & MPI2_DOORBELL_DATA_MASK); writel(0, &ioc->chip->HostInterruptStatus); } @@ -7949,14 +7954,14 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc) goto out; } - host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic); + host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic, READL_RETRY_COUNT); drsprintk(ioc, ioc_info(ioc, "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n", count, host_diagnostic)); } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0); - hcb_size = ioc->base_readl(&ioc->chip->HCBSize); + hcb_size = ioc->base_readl(&ioc->chip->HCBSize, READL_RETRY_SHORT_COUNT); drsprintk(ioc, ioc_info(ioc, "diag reset: issued\n")); writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER, @@ -7969,7 +7974,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc) for (count = 0; count < (300000000 / MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) { - host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic); + host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic, READL_RETRY_COUNT); if (host_diagnostic == 0xFFFFFFFF) { ioc_info(ioc, diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 05364aa15ecd..b4e57b89915d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -160,6 +160,15 @@ #define IOC_OPERATIONAL_WAIT_COUNT 10 +/* + *Due to hardware specific behaviour + *retry count is increased from 3 to 30. + *Delay is not needed as retry count fulfill + *the desired requirement + */ +#define READL_RETRY_COUNT 30 +#define READL_RETRY_SHORT_COUNT 3 + /* * NVMe defines */ @@ -994,7 +1003,7 @@ typedef void (*NVME_BUILD_PRP)(struct MPT3SAS_ADAPTER *ioc, u16 smid, typedef void (*PUT_SMID_IO_FP_HIP) (struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 funcdep); typedef void (*PUT_SMID_DEFAULT) (struct MPT3SAS_ADAPTER *ioc, u16 smid); -typedef u32 (*BASE_READ_REG) (const volatile void __iomem *addr); +typedef u32 (*BASE_READ_REG) (const volatile void __iomem *addr, u8 retry_count); /* * To get high iops reply queue's msix index when high iops mode is enabled * else get the msix index of general reply queues. -- 2.31.1

1 year, 8 months

3
7
0 0

[PATCH v2 1/2] perf build: Update build rule for generated files

by Namhyung Kim

The bison and flex generate C files from the source (.y and .l) files. When O= option is used, they are saved in a separate directory but the default build rule assumes the .C files are in the source directory. So it might read invalid file if there are generated files from an old version. The same is true for the pmu-events files. For example, the following command would cause a build failure: $ git checkout v6.3 $ make -C tools/perf # build in the same directory $ git checkout v6.5-rc2 $ mkdir build # create a build directory $ make -C tools/perf O=build # build in a different directory but it # refers files in the source directory Let's update the build rule to specify those cases explicitly to depend on the files in the output directory. Note that it's not a complete fix and it needs the next patch for the include path too. Fixes: 80eeb67fe577 ("perf jevents: Program to convert JSON file") Cc: stable(a)vger.kernel.org Signed-off-by: Namhyung Kim <namhyung(a)kernel.org> --- tools/build/Makefile.build | 10 ++++++++++ tools/perf/pmu-events/Build | 6 ++++++ 2 files changed, 16 insertions(+) diff --git a/tools/build/Makefile.build b/tools/build/Makefile.build index 89430338a3d9..fac42486a8cf 100644 --- a/tools/build/Makefile.build +++ b/tools/build/Makefile.build @@ -117,6 +117,16 @@ $(OUTPUT)%.s: %.c FORCE $(call rule_mkdir) $(call if_changed_dep,cc_s_c) +# bison and flex files are generated in the OUTPUT directory +# so it needs a separate rule to depend on them properly +$(OUTPUT)%-bison.o: $(OUTPUT)%-bison.c FORCE + $(call rule_mkdir) + $(call if_changed_dep,$(host)cc_o_c) + +$(OUTPUT)%-flex.o: $(OUTPUT)%-flex.c FORCE + $(call rule_mkdir) + $(call if_changed_dep,$(host)cc_o_c) + # Gather build data: # obj-y - list of build objects # subdir-y - list of directories to nest diff --git a/tools/perf/pmu-events/Build b/tools/perf/pmu-events/Build index 150765f2baee..1d18bb89402e 100644 --- a/tools/perf/pmu-events/Build +++ b/tools/perf/pmu-events/Build @@ -35,3 +35,9 @@ $(PMU_EVENTS_C): $(JSON) $(JSON_TEST) $(JEVENTS_PY) $(METRIC_PY) $(METRIC_TEST_L $(call rule_mkdir) $(Q)$(call echo-cmd,gen)$(PYTHON) $(JEVENTS_PY) $(JEVENTS_ARCH) $(JEVENTS_MODEL) pmu-events/arch $@ endif + +# pmu-events.c file is generated in the OUTPUT directory so it needs a +# separate rule to depend on it properly +$(OUTPUT)pmu-events/pmu-events.o: $(PMU_EVENTS_C) + $(call rule_mkdir) + $(call if_changed_dep,cc_o_c) -- 2.41.0.487.g6d72f3e995-goog

1 year, 8 months

2
5
0 0

[PATCH 0/2] don't use mapcount() to check large folio sharing

by Yin Fengwei

In madvise_cold_or_pageout_pte_range() and madvise_free_pte_range(), folio_mapcount() is used to check whether the folio is shared. But it's not correct as folio_mapcount() returns total mapcount of large folio. Use folio_estimated_sharers() here as the estimated number is enough. Yin Fengwei (2): madvise: don't use mapcount() against large folio for sharing check madvise: don't use mapcount() against large folio for sharing check mm/huge_memory.c | 2 +- mm/madvise.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) -- 2.39.2

1 year, 8 months

7
29
0 0

[PATCH v9 04/10] serial: sc16is7xx: refactor GPIO controller registration

by Hugo Villeneuve

From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> In preparation for upcoming patch "fix regression with GPIO configuration". To facilitate review and make code more modular. Cc: <stable(a)vger.kernel.org> # 6.1.x Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Reviewed-by: Lech Perczak <lech.perczak(a)camlingroup.com> Tested-by: Lech Perczak <lech.perczak(a)camlingroup.com> --- drivers/tty/serial/sc16is7xx.c | 40 ++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 16 deletions(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 32d43d00a583..5b0aeef9d534 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -332,6 +332,7 @@ struct sc16is7xx_one { struct sc16is7xx_port { const struct sc16is7xx_devtype *devtype; + struct device *dev; struct regmap *regmap; struct clk *clk; #ifdef CONFIG_GPIOLIB @@ -1349,6 +1350,25 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, return 0; } + +static int sc16is7xx_setup_gpio_chip(struct sc16is7xx_port *s) +{ + if (!s->devtype->nr_gpio) + return 0; + + s->gpio.owner = THIS_MODULE; + s->gpio.parent = s->dev; + s->gpio.label = dev_name(s->dev); + s->gpio.direction_input = sc16is7xx_gpio_direction_input; + s->gpio.get = sc16is7xx_gpio_get; + s->gpio.direction_output = sc16is7xx_gpio_direction_output; + s->gpio.set = sc16is7xx_gpio_set; + s->gpio.base = -1; + s->gpio.ngpio = s->devtype->nr_gpio; + s->gpio.can_sleep = 1; + + return gpiochip_add_data(&s->gpio, s); +} #endif static const struct serial_rs485 sc16is7xx_rs485_supported = { @@ -1412,6 +1432,7 @@ static int sc16is7xx_probe(struct device *dev, s->regmap = regmap; s->devtype = devtype; + s->dev = dev; dev_set_drvdata(dev, s); mutex_init(&s->efr_lock); @@ -1502,22 +1523,9 @@ static int sc16is7xx_probe(struct device *dev, } #ifdef CONFIG_GPIOLIB - if (devtype->nr_gpio) { - /* Setup GPIO cotroller */ - s->gpio.owner = THIS_MODULE; - s->gpio.parent = dev; - s->gpio.label = dev_name(dev); - s->gpio.direction_input = sc16is7xx_gpio_direction_input; - s->gpio.get = sc16is7xx_gpio_get; - s->gpio.direction_output = sc16is7xx_gpio_direction_output; - s->gpio.set = sc16is7xx_gpio_set; - s->gpio.base = -1; - s->gpio.ngpio = devtype->nr_gpio; - s->gpio.can_sleep = 1; - ret = gpiochip_add_data(&s->gpio, s); - if (ret) - goto out_ports; - } + ret = sc16is7xx_setup_gpio_chip(s); + if (ret) + goto out_ports; #endif /* -- 2.30.2

1 year, 8 months

2
6
0 0

[RESEND PATCH v8 06/10] serial: sc16is7xx: fix regression with GPIO configuration

by Hugo Villeneuve

From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Commit 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") and commit 21144bab4f11 ("sc16is7xx: Handle modem status lines") changed the function of the GPIOs pins to act as modem control lines without any possibility of selecting GPIO function. As a consequence, applications that depends on GPIO lines configured by default as GPIO pins no longer work as expected. Also, the change to select modem control lines function was done only for channel A of dual UART variants (752/762). This was not documented in the log message. Allow to specify GPIO or modem control line function in the device tree, and for each of the ports (A or B). Do so by using the new device-tree property named "modem-control-line-ports" (property added in separate patch). When registering GPIO chip controller, mask-out GPIO pins declared as modem control lines according to this new "modem-control-line-ports" DT property. Boards that need to have GPIOS configured as modem control lines should add that property to their device tree. Here is a list of boards using the sc16is7xx driver in their device tree and that may need to be modified: arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts mips/boot/dts/ingenic/cu1830-neo.dts mips/boot/dts/ingenic/cu1000-neo.dts Fixes: 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") Fixes: 21144bab4f11 ("sc16is7xx: Handle modem status lines") Cc: <stable(a)vger.kernel.org> # 6.1.x: 95982fad dt-bindings: sc16is7xx: Add property to change GPIO function Cc: <stable(a)vger.kernel.org> # 6.1.x: 1584d572 serial: sc16is7xx: refactor GPIO controller registration Cc: <stable(a)vger.kernel.org> # 6.1.x: ac2caa5a serial: sc16is7xx: remove obsolete out_thread label Cc: <stable(a)vger.kernel.org> # 6.1.x: d90961ad serial: sc16is7xx: mark IOCONTROL register as volatile Cc: <stable(a)vger.kernel.org> # 6.1.x: 6dae3bad serial: sc16is7xx: fix broken port 0 uart init Cc: <stable(a)vger.kernel.org> # 6.1.x Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Reviewed-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Reviewed-by: Lech Perczak <lech.perczak(a)camlingroup.com> Tested-by: Lech Perczak <lech.perczak(a)camlingroup.com> --- drivers/tty/serial/sc16is7xx.c | 104 +++++++++++++++++++++++++++------ 1 file changed, 85 insertions(+), 19 deletions(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 5b0aeef9d534..bc0a288f258d 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -236,7 +236,8 @@ /* IOControl register bits (Only 750/760) */ #define SC16IS7XX_IOCONTROL_LATCH_BIT (1 << 0) /* Enable input latching */ -#define SC16IS7XX_IOCONTROL_MODEM_BIT (1 << 1) /* Enable GPIO[7:4] as modem pins */ +#define SC16IS7XX_IOCONTROL_MODEM_A_BIT (1 << 1) /* Enable GPIO[7:4] as modem A pins */ +#define SC16IS7XX_IOCONTROL_MODEM_B_BIT (1 << 2) /* Enable GPIO[3:0] as modem B pins */ #define SC16IS7XX_IOCONTROL_SRESET_BIT (1 << 3) /* Software Reset */ /* EFCR register bits */ @@ -301,12 +302,12 @@ /* Misc definitions */ #define SC16IS7XX_FIFO_SIZE (64) #define SC16IS7XX_REG_SHIFT 2 +#define SC16IS7XX_GPIOS_PER_BANK 4 struct sc16is7xx_devtype { char name[10]; int nr_gpio; int nr_uart; - int has_mctrl; }; #define SC16IS7XX_RECONF_MD (1 << 0) @@ -337,7 +338,9 @@ struct sc16is7xx_port { struct clk *clk; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; + unsigned long gpio_valid_mask; #endif + u8 mctrl_mask; unsigned char buf[SC16IS7XX_FIFO_SIZE]; struct kthread_worker kworker; struct task_struct *kworker_task; @@ -448,35 +451,30 @@ static const struct sc16is7xx_devtype sc16is74x_devtype = { .name = "SC16IS74X", .nr_gpio = 0, .nr_uart = 1, - .has_mctrl = 0, }; static const struct sc16is7xx_devtype sc16is750_devtype = { .name = "SC16IS750", - .nr_gpio = 4, + .nr_gpio = 8, .nr_uart = 1, - .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is752_devtype = { .name = "SC16IS752", - .nr_gpio = 0, + .nr_gpio = 8, .nr_uart = 2, - .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is760_devtype = { .name = "SC16IS760", - .nr_gpio = 4, + .nr_gpio = 8, .nr_uart = 1, - .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is762_devtype = { .name = "SC16IS762", - .nr_gpio = 0, + .nr_gpio = 8, .nr_uart = 2, - .has_mctrl = 1, }; static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg) @@ -1351,14 +1349,43 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, return 0; } +static int sc16is7xx_gpio_init_valid_mask(struct gpio_chip *chip, + unsigned long *valid_mask, + unsigned int ngpios) +{ + struct sc16is7xx_port *s = gpiochip_get_data(chip); + + *valid_mask = s->gpio_valid_mask; + + return 0; +} + static int sc16is7xx_setup_gpio_chip(struct sc16is7xx_port *s) { if (!s->devtype->nr_gpio) return 0; + switch (s->mctrl_mask) { + case 0: + s->gpio_valid_mask = GENMASK(7, 0); + break; + case SC16IS7XX_IOCONTROL_MODEM_A_BIT: + s->gpio_valid_mask = GENMASK(3, 0); + break; + case SC16IS7XX_IOCONTROL_MODEM_B_BIT: + s->gpio_valid_mask = GENMASK(7, 4); + break; + default: + break; + } + + if (s->gpio_valid_mask == 0) + return 0; + s->gpio.owner = THIS_MODULE; s->gpio.parent = s->dev; s->gpio.label = dev_name(s->dev); + s->gpio.init_valid_mask = sc16is7xx_gpio_init_valid_mask; s->gpio.direction_input = sc16is7xx_gpio_direction_input; s->gpio.get = sc16is7xx_gpio_get; s->gpio.direction_output = sc16is7xx_gpio_direction_output; @@ -1371,6 +1398,47 @@ static int sc16is7xx_setup_gpio_chip(struct sc16is7xx_port *s) } #endif +/* + * Configure ports designated to operate as modem control lines. + */ +static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s) +{ + int i; + int ret; + int count; + u32 mctrl_port[2]; + + count = device_property_count_u32(s->dev, + "nxp,modem-control-line-ports"); + if (count < 0 || count > ARRAY_SIZE(mctrl_port)) + return 0; + + ret = device_property_read_u32_array(s->dev, + "nxp,modem-control-line-ports", + mctrl_port, count); + if (ret) + return ret; + + s->mctrl_mask = 0; + + for (i = 0; i < count; i++) { + /* Use GPIO lines as modem control lines */ + if (mctrl_port[i] == 0) + s->mctrl_mask |= SC16IS7XX_IOCONTROL_MODEM_A_BIT; + else if (mctrl_port[i] == 1) + s->mctrl_mask |= SC16IS7XX_IOCONTROL_MODEM_B_BIT; + } + + if (s->mctrl_mask) + regmap_update_bits( + s->regmap, + SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT, + SC16IS7XX_IOCONTROL_MODEM_A_BIT | + SC16IS7XX_IOCONTROL_MODEM_B_BIT, s->mctrl_mask); + + return 0; +} + static const struct serial_rs485 sc16is7xx_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND, .delay_rts_before_send = 1, @@ -1479,12 +1547,6 @@ static int sc16is7xx_probe(struct device *dev, SC16IS7XX_EFCR_RXDISABLE_BIT | SC16IS7XX_EFCR_TXDISABLE_BIT); - /* Use GPIO lines as modem status registers */ - if (devtype->has_mctrl) - sc16is7xx_port_write(&s->p[i].port, - SC16IS7XX_IOCONTROL_REG, - SC16IS7XX_IOCONTROL_MODEM_BIT); - /* Initialize kthread work structs */ kthread_init_work(&s->p[i].tx_work, sc16is7xx_tx_proc); kthread_init_work(&s->p[i].reg_work, sc16is7xx_reg_proc); @@ -1522,6 +1584,10 @@ static int sc16is7xx_probe(struct device *dev, s->p[u].irda_mode = true; } + ret = sc16is7xx_setup_mctrl_ports(s); + if (ret) + goto out_ports; + #ifdef CONFIG_GPIOLIB ret = sc16is7xx_setup_gpio_chip(s); if (ret) @@ -1548,7 +1614,7 @@ static int sc16is7xx_probe(struct device *dev, return 0; #ifdef CONFIG_GPIOLIB - if (devtype->nr_gpio) + if (s->gpio_valid_mask) gpiochip_remove(&s->gpio); #endif @@ -1572,7 +1638,7 @@ static void sc16is7xx_remove(struct device *dev) int i; #ifdef CONFIG_GPIOLIB - if (s->devtype->nr_gpio) + if (s->gpio_valid_mask) gpiochip_remove(&s->gpio); #endif -- 2.30.2

1 year, 8 months

3
12
0 0

FAILED: patch "[PATCH] mmc: meson-gx: fix deferred probing" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x b8ada54fa1b83f3b6480d4cced71354301750153 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023062303-crazily-recent-78b0@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b8ada54fa1b83f3b6480d4cced71354301750153 Mon Sep 17 00:00:00 2001 From: Sergey Shtylyov <s.shtylyov(a)omp.ru> Date: Sat, 17 Jun 2023 23:36:12 +0300 Subject: [PATCH] mmc: meson-gx: fix deferred probing The driver overrides the error codes and IRQ0 returned by platform_get_irq() to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the error codes upstream. Since commit ce753ad1549c ("platform: finally disallow IRQ0 in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs, so we now can safely ignore it... Fixes: cbcaac6d7dd2 ("mmc: meson-gx-mmc: Fix platform_get_irq's error checking") Cc: stable(a)vger.kernel.org # v5.19+ Signed-off-by: Sergey Shtylyov <s.shtylyov(a)omp.ru> Reviewed-by: Neil Armstrong <neil.armstrong(a)linaro.org> Link: https://lore.kernel.org/r/20230617203622.6812-3-s.shtylyov@omp.ru Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index f90b0fd8d8b0..ee9a25b900ae 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -1186,8 +1186,8 @@ static int meson_mmc_probe(struct platform_device *pdev) return PTR_ERR(host->regs); host->irq = platform_get_irq(pdev, 0); - if (host->irq <= 0) - return -EINVAL; + if (host->irq < 0) + return host->irq; cd_irq = platform_get_irq_optional(pdev, 1); mmc_gpio_set_cd_irq(mmc, cd_irq);

1 year, 8 months

2
1
0 0

[PATCH v1] usb: typec: altmodes/displayport: Signal hpd when configuring pin assignment

by RD Babiera

When connecting to some DisplayPort partners, the initial status update after entering DisplayPort Alt Mode notifies that the DFP_D/UFP_D is not in the connected state. This leads to sending a configure message that keeps the device in USB mode. The port partner then sets DFP_D/UFP_D to the connected state and HPD to high in the same Attention message. Currently, the HPD signal is dropped in order to handle configuration. This patch saves changes to the HPD signal when the device chooses to configure during dp_altmode_status_update, and invokes sysfs_notify if necessary for HPD after configuring. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable(a)vger.kernel.org Signed-off-by: RD Babiera <rdbabiera(a)google.com> --- drivers/usb/typec/altmodes/displayport.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index 66de880b28d0..cdf8261e22db 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -60,6 +60,7 @@ struct dp_altmode { enum dp_state state; bool hpd; + bool pending_hpd; struct mutex lock; /* device lock */ struct work_struct work; @@ -144,8 +145,13 @@ static int dp_altmode_status_update(struct dp_altmode *dp) dp->state = DP_STATE_EXIT; } else if (!(con & DP_CONF_CURRENTLY(dp->data.conf))) { ret = dp_altmode_configure(dp, con); - if (!ret) + if (!ret) { dp->state = DP_STATE_CONFIGURE; + if (dp->hpd != hpd) { + dp->hpd = hpd; + dp->pending_hpd = true; + } + } } else { if (dp->hpd != hpd) { drm_connector_oob_hotplug_event(dp->connector_fwnode); @@ -161,6 +167,16 @@ static int dp_altmode_configured(struct dp_altmode *dp) { sysfs_notify(&dp->alt->dev.kobj, "displayport", "configuration"); sysfs_notify(&dp->alt->dev.kobj, "displayport", "pin_assignment"); + /* + * If the DFP_D/UFP_D sends a change in HPD when first notifying the + * DisplayPort driver that it is connected, then we wait until + * configuration is complete to signal HPD. + */ + if (dp->pending_hpd) { + drm_connector_oob_hotplug_event(dp->connector_fwnode); + sysfs_notify(&dp->alt->dev.kobj, "displayport", "hpd"); + dp->pending_hpd = false; + } return dp_altmode_notify(dp); } base-commit: fdf0eaf11452d72945af31804e2a1048ee1b574c -- 2.41.0.487.g6d72f3e995-goog

1 year, 8 months

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2023