February 2025 - Linux-stable-mirror

by Biju Das

This patch series addresses 2 issues 1) Fix typo in pattern properties for R-Car V4M. 2) Fix page entries in the AFL list. v1->v2: * Split fixes patches as separate series. * Added Rb tag from Geert for binding patch. * Added the tag Cc:stable@vger.kernel.org Biju Das (2): dt-bindings: can: renesas,rcar-canfd: Fix typo in pattern properties for R-Car V4M can: rcar_canfd: Fix page entries in the AFL list .../bindings/net/can/renesas,rcar-canfd.yaml | 2 +- drivers/net/can/rcar/rcar_canfd.c | 17 ++++++++++------- 2 files changed, 11 insertions(+), 8 deletions(-) -- 2.43.0

3 months, 1 week

4
15
0 0

[PATCH V3] drm/sched: Fix fence reference count leak

by Qianyi Liu

From: qianyi liu <liuqianyi125(a)gmail.com> The last_scheduled fence leaked when an entity was being killed and adding its callback failed. Decrement the reference count of prev when dma_fence_add_callback() fails, ensuring proper balance. Cc: stable(a)vger.kernel.org Fixes: 2fdb8a8f07c2 ("drm/scheduler: rework entity flush, kill and fini") Signed-off-by: qianyi liu <liuqianyi125(a)gmail.com> --- v2 -> v3: Rework commit message (Markus) v1 -> v2: Added 'Fixes:' tag and clarified commit message (Philipp and Matthew) --- drivers/gpu/drm/scheduler/sched_entity.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/scheduler/sched_entity.c b/drivers/gpu/drm/scheduler/sched_entity.c index 69bcf0e99d57..1c0c14bcf726 100644 --- a/drivers/gpu/drm/scheduler/sched_entity.c +++ b/drivers/gpu/drm/scheduler/sched_entity.c @@ -259,9 +259,12 @@ static void drm_sched_entity_kill(struct drm_sched_entity *entity) struct drm_sched_fence *s_fence = job->s_fence; dma_fence_get(&s_fence->finished); - if (!prev || dma_fence_add_callback(prev, &job->finish_cb, - drm_sched_entity_kill_jobs_cb)) + if (!prev || + dma_fence_add_callback(prev, &job->finish_cb, + drm_sched_entity_kill_jobs_cb)) { + dma_fence_put(prev); drm_sched_entity_kill_jobs_cb(NULL, &job->finish_cb); + } prev = &s_fence->finished; } -- 2.25.1

3 months, 1 week

2
4
0 0

Re: [PATCH 1/2] arm64: efi: Execute runtime services from a dedicated stack

by Lee Jones

On Mon, 05 Dec 2022, Ard Biesheuvel wrote: > With the introduction of PRMT in the ACPI subsystem, the EFI rts > workqueue is no longer the only caller of efi_call_virt_pointer() in the > kernel. This means the EFI runtime services lock is no longer sufficient > to manage concurrent calls into firmware, but also that firmware calls > may occur that are not marshalled via the workqueue mechanism, but > originate directly from the caller context. > > For added robustness, and to ensure that the runtime services have 8 KiB > of stack space available as per the EFI spec, introduce a spinlock > protected EFI runtime stack of 8 KiB, where the spinlock also ensures > serialization between the EFI rts workqueue (which itself serializes EFI > runtime calls) and other callers of efi_call_virt_pointer(). > > While at it, use the stack pivot to avoid reloading the shadow call > stack pointer from the ordinary stack, as doing so could produce a > gadget to defeat it. > > Signed-off-by: Ard Biesheuvel <ardb(a)kernel.org> > --- > arch/arm64/include/asm/efi.h | 3 +++ > arch/arm64/kernel/efi-rt-wrapper.S | 13 +++++++++- > arch/arm64/kernel/efi.c | 25 ++++++++++++++++++++ > 3 files changed, 40 insertions(+), 1 deletion(-) Could we have this in Stable please? Upstream commit: ff7a167961d1b ("arm64: efi: Execute runtime services from a dedicated stack") Ard, do we need Patch 2 as well, or can this be applied on its own? > diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h > index 7c12e01c2b312e7b..1c408ec3c8b3a883 100644 > --- a/arch/arm64/include/asm/efi.h > +++ b/arch/arm64/include/asm/efi.h > @@ -25,6 +25,7 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md); > ({ \ > efi_virtmap_load(); \ > __efi_fpsimd_begin(); \ > + spin_lock(&efi_rt_lock); \ > }) > > #undef arch_efi_call_virt > @@ -33,10 +34,12 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md); > > #define arch_efi_call_virt_teardown() \ > ({ \ > + spin_unlock(&efi_rt_lock); \ > __efi_fpsimd_end(); \ > efi_virtmap_unload(); \ > }) > > +extern spinlock_t efi_rt_lock; > efi_status_t __efi_rt_asm_wrapper(void *, const char *, ...); > > #define ARCH_EFI_IRQ_FLAGS_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT) > diff --git a/arch/arm64/kernel/efi-rt-wrapper.S b/arch/arm64/kernel/efi-rt-wrapper.S > index 75691a2641c1c0f8..b2786b968fee68dd 100644 > --- a/arch/arm64/kernel/efi-rt-wrapper.S > +++ b/arch/arm64/kernel/efi-rt-wrapper.S > @@ -16,6 +16,12 @@ SYM_FUNC_START(__efi_rt_asm_wrapper) > */ > stp x1, x18, [sp, #16] > > + ldr_l x16, efi_rt_stack_top > + mov sp, x16 > +#ifdef CONFIG_SHADOW_CALL_STACK > + str x18, [sp, #-16]! > +#endif > + > /* > * We are lucky enough that no EFI runtime services take more than > * 5 arguments, so all are passed in registers rather than via the > @@ -29,6 +35,7 @@ SYM_FUNC_START(__efi_rt_asm_wrapper) > mov x4, x6 > blr x8 > > + mov sp, x29 > ldp x1, x2, [sp, #16] > cmp x2, x18 > ldp x29, x30, [sp], #32 > @@ -42,6 +49,10 @@ SYM_FUNC_START(__efi_rt_asm_wrapper) > * called with preemption disabled and a separate shadow stack is used > * for interrupts. > */ > - mov x18, x2 > +#ifdef CONFIG_SHADOW_CALL_STACK > + ldr_l x18, efi_rt_stack_top > + ldr x18, [x18, #-16] > +#endif > + > b efi_handle_corrupted_x18 // tail call > SYM_FUNC_END(__efi_rt_asm_wrapper) > diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c > index a908a37f03678b6b..8cb2e005f8aca589 100644 > --- a/arch/arm64/kernel/efi.c > +++ b/arch/arm64/kernel/efi.c > @@ -144,3 +144,28 @@ asmlinkage efi_status_t efi_handle_corrupted_x18(efi_status_t s, const char *f) > pr_err_ratelimited(FW_BUG "register x18 corrupted by EFI %s\n", f); > return s; > } > + > +DEFINE_SPINLOCK(efi_rt_lock); > + > +asmlinkage u64 *efi_rt_stack_top __ro_after_init; > + > +/* required by the EFI spec */ > +static_assert(THREAD_SIZE >= SZ_8K); > + > +int __init arm64_efi_rt_init(void) > +{ > + void *p = __vmalloc_node_range(THREAD_SIZE, THREAD_ALIGN, > + VMALLOC_START, VMALLOC_END, GFP_KERNEL, > + PAGE_KERNEL, 0, NUMA_NO_NODE, > + __builtin_return_address(0)); > + > + if (!p) { > + pr_warn("Failed to allocate EFI runtime stack\n"); > + clear_bit(EFI_RUNTIME_SERVICES, &efi.flags); > + return -ENOMEM; > + } > + > + efi_rt_stack_top = p + THREAD_SIZE; > + return 0; > +} > +core_initcall(arm64_efi_rt_init); > -- > 2.35.1 > > -- Lee Jones [李琼斯]

3 months, 1 week

6
13
0 0

[PATCH v6 4/8] crypto: ccp: Fix uapi definitions of PSP errors

by Dionna Glaze

From: Alexey Kardashevskiy <aik(a)amd.com> Additions to the error enum after the explicit 0x27 setting for SEV_RET_INVALID_KEY leads to incorrect value assignments. Use explicit values to match the manufacturer specifications more clearly. Fixes: 3a45dc2b419e ("crypto: ccp: Define the SEV-SNP commands") CC: Sean Christopherson <seanjc(a)google.com> CC: Paolo Bonzini <pbonzini(a)redhat.com> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Ingo Molnar <mingo(a)redhat.com> CC: Borislav Petkov <bp(a)alien8.de> CC: Dave Hansen <dave.hansen(a)linux.intel.com> CC: Ashish Kalra <ashish.kalra(a)amd.com> CC: Tom Lendacky <thomas.lendacky(a)amd.com> CC: John Allen <john.allen(a)amd.com> CC: Herbert Xu <herbert(a)gondor.apana.org.au> CC: "David S. Miller" <davem(a)davemloft.net> CC: Michael Roth <michael.roth(a)amd.com> CC: Luis Chamberlain <mcgrof(a)kernel.org> CC: Russ Weight <russ.weight(a)linux.dev> CC: Danilo Krummrich <dakr(a)redhat.com> CC: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> CC: "Rafael J. Wysocki" <rafael(a)kernel.org> CC: Tianfei zhang <tianfei.zhang(a)intel.com> CC: Alexey Kardashevskiy <aik(a)amd.com> CC: stable(a)vger.kernel.org Signed-off-by: Alexey Kardashevskiy <aik(a)amd.com> Signed-off-by: Dionna Glaze <dionnaglaze(a)google.com> --- include/uapi/linux/psp-sev.h | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/include/uapi/linux/psp-sev.h b/include/uapi/linux/psp-sev.h index 832c15d9155bd..eeb20dfb1fdaa 100644 --- a/include/uapi/linux/psp-sev.h +++ b/include/uapi/linux/psp-sev.h @@ -73,13 +73,20 @@ typedef enum { SEV_RET_INVALID_PARAM, SEV_RET_RESOURCE_LIMIT, SEV_RET_SECURE_DATA_INVALID, - SEV_RET_INVALID_KEY = 0x27, - SEV_RET_INVALID_PAGE_SIZE, - SEV_RET_INVALID_PAGE_STATE, - SEV_RET_INVALID_MDATA_ENTRY, - SEV_RET_INVALID_PAGE_OWNER, - SEV_RET_INVALID_PAGE_AEAD_OFLOW, - SEV_RET_RMP_INIT_REQUIRED, + SEV_RET_INVALID_PAGE_SIZE = 0x0019, + SEV_RET_INVALID_PAGE_STATE = 0x001A, + SEV_RET_INVALID_MDATA_ENTRY = 0x001B, + SEV_RET_INVALID_PAGE_OWNER = 0x001C, + SEV_RET_AEAD_OFLOW = 0x001D, + SEV_RET_EXIT_RING_BUFFER = 0x001F, + SEV_RET_RMP_INIT_REQUIRED = 0x0020, + SEV_RET_BAD_SVN = 0x0021, + SEV_RET_BAD_VERSION = 0x0022, + SEV_RET_SHUTDOWN_REQUIRED = 0x0023, + SEV_RET_UPDATE_FAILED = 0x0024, + SEV_RET_RESTORE_REQUIRED = 0x0025, + SEV_RET_RMP_INITIALIZATION_FAILED = 0x0026, + SEV_RET_INVALID_KEY = 0x0027, SEV_RET_MAX, } sev_ret_code; -- 2.47.0.277.g8800431eea-goog

3 months, 1 week

4
6
0 0

[PATCH] PCI: controller: Restore PCI_REASSIGN_ALL_BUS when PCI_PROBE_ONLY is enabled

by Bo Sun

On our Marvell OCTEON CN96XX board, we observed the following panic on the latest kernel: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [0000000000000080] user address but active_mm is swapper Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: CPU: 9 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.13.0-rc7-00149-g9bffa1ad25b8 #1 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : of_pci_add_properties+0x278/0x4c8 lr : of_pci_add_properties+0x258/0x4c8 sp : ffff8000822ef9b0 x29: ffff8000822ef9b0 x28: ffff000106dd8000 x27: ffff800081bc3b30 x26: ffff800081540118 x25: ffff8000813d2be0 x24: 0000000000000000 x23: ffff00010528a800 x22: ffff000107c50000 x21: ffff0001039c2630 x20: ffff0001039c2630 x19: 0000000000000000 x18: ffffffffffffffff x17: 00000000a49c1b85 x16: 0000000084c07b58 x15: ffff000103a10f98 x14: ffffffffffffffff x13: ffff000103a10f96 x12: 0000000000000003 x11: 0101010101010101 x10: 000000000000002c x9 : ffff800080ca7acc x8 : ffff0001038fd900 x7 : 0000000000000000 x6 : 0000000000696370 x5 : 0000000000000000 x4 : 0000000000000002 x3 : ffff8000822efa40 x2 : ffff800081341000 x1 : ffff000107c50000 x0 : 0000000000000000 Call trace: of_pci_add_properties+0x278/0x4c8 (P) of_pci_make_dev_node+0xe0/0x158 pci_bus_add_device+0x158/0x210 pci_bus_add_devices+0x40/0x98 pci_host_probe+0x94/0x118 pci_host_common_probe+0x120/0x1a0 platform_probe+0x70/0xf0 really_probe+0xb4/0x2a8 __driver_probe_device+0x80/0x140 driver_probe_device+0x48/0x170 __driver_attach+0x9c/0x1b0 bus_for_each_dev+0x7c/0xe8 driver_attach+0x2c/0x40 bus_add_driver+0xec/0x218 driver_register+0x68/0x138 __platform_driver_register+0x2c/0x40 gen_pci_driver_init+0x24/0x38 do_one_initcall+0x4c/0x278 kernel_init_freeable+0x1f4/0x3d0 kernel_init+0x28/0x1f0 ret_from_fork+0x10/0x20 Code: aa1603e1 f0005522 d2800044 91000042 (f94040a0) This regression was introduced by commit 7246a4520b4b ("PCI: Use preserve_config in place of pci_flags"). On our board, the 002:00:07.0 bridge is misconfigured by the bootloader. Both its secondary and subordinate bus numbers are initialized to 0, while its fixed secondary bus number is set to 8. However, bus number 8 is also assigned to another bridge (0002:00:0f.0). Although this is a bootloader issue, before the change in commit 7246a4520b4b, the PCI_REASSIGN_ALL_BUS flag was set by default when PCI_PROBE_ONLY was enabled, ensuing that all the bus number for these bridges were reassigned, avoiding any conflicts. After the change introduced in commit 7246a4520b4b, the bus numbers assigned by the bootloader are reused by all other bridges, except the misconfigured 002:00:07.0 bridge. The kernel attempt to reconfigure 002:00:07.0 by reusing the fixed secondary bus number 8 assigned by bootloader. However, since a pci_bus has already been allocated for bus 8 due to the probe of 0002:00:0f.0, no new pci_bus allocated for 002:00:07.0. This results in a pci bridge device without a pci_bus attached (pdev->subordinate == NULL). Consequently, accessing pdev->subordinate in of_pci_prop_bus_range() leads to a NULL pointer dereference. To summarize, we need to restore the PCI_REASSIGN_ALL_BUS flag when PCI_PROBE_ONLY is enabled in order to work around issue like the one described above. Cc: stable(a)vger.kernel.org Fixes: 7246a4520b4b ("PCI: Use preserve_config in place of pci_flags") Signed-off-by: Bo Sun <Bo.Sun.CN(a)windriver.com> --- drivers/pci/controller/pci-host-common.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/controller/pci-host-common.c b/drivers/pci/controller/pci-host-common.c index cf5f59a745b3..615923acbc3e 100644 --- a/drivers/pci/controller/pci-host-common.c +++ b/drivers/pci/controller/pci-host-common.c @@ -73,6 +73,10 @@ int pci_host_common_probe(struct platform_device *pdev) if (IS_ERR(cfg)) return PTR_ERR(cfg); + /* Do not reassign resources if probe only */ + if (!pci_has_flag(PCI_PROBE_ONLY)) + pci_add_flags(PCI_REASSIGN_ALL_BUS); + bridge->sysdata = cfg; bridge->ops = (struct pci_ops *)&ops->pci_ops; bridge->msi_domain = true; -- 2.48.1

3 months, 1 week

4
9
0 0

Re: [PATCH] net: fix uninitialised access in mii_nway_restart()

by Qasim Ijaz

On Tue, Feb 18, 2025 at 02:10:08AM +0100, Andrew Lunn wrote: > On Tue, Feb 18, 2025 at 12:24:43AM +0000, Qasim Ijaz wrote: > > In mii_nway_restart() during the line: > > > > bmcr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMCR); > > > > The code attempts to call mii->mdio_read which is ch9200_mdio_read(). > > > > ch9200_mdio_read() utilises a local buffer, which is initialised > > with control_read(): > > > > unsigned char buff[2]; > > > > However buff is conditionally initialised inside control_read(): > > > > if (err == size) { > > memcpy(data, buf, size); > > } > > > > If the condition of "err == size" is not met, then buff remains > > uninitialised. Once this happens the uninitialised buff is accessed > > and returned during ch9200_mdio_read(): > > > > return (buff[0] | buff[1] << 8); > > > > The problem stems from the fact that ch9200_mdio_read() ignores the > > return value of control_read(), leading to uinit-access of buff. > > > > To fix this we should check the return value of control_read() > > and return early on error. > > What about get_mac_address()? > > If you find a bug, it is a good idea to look around and see if there > are any more instances of the same bug. I could be wrong, but it seems > like get_mac_address() suffers from the same problem? Thank you for the feedback Andrew. I checked get_mac_address() before sending this patch and to me it looks like it does check the return value of control_read(). It accumulates the return value of each control_read() call into rd_mac_len and then checks if it not equal to what is expected (ETH_ALEN which is 6), I believe each call should return 2. > > Andrew

3 months, 1 week

2
3
0 0

Apply 3 commits for 6.13.y

by Miguel Ojeda

Hi Greg, Sasha, Please consider applying the following commits for 6.13.y: 27c7518e7f1c ("rust: finish using custom FFI integer types") 1bae8729e50a ("rust: map `long` to `isize` and `char` to `u8`") 9b98be76855f ("rust: cleanup unnecessary casts") They should apply cleanly. This backports the custom FFI integer types, which in turn solves a build failure under `CONFIG_RUST_FW_LOADER_ABSTRACTIONS=y`. I will have to send something similar to 6.12.y, but it requires more commits -- I may do the `alloc` backport first we discussed the other day. Thanks! Cheers, Miguel

3 months, 1 week

4
5
0 0

[PATCH v2] tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN

by Günther Noack

With this, processes without CAP_SYS_ADMIN are able to use TIOCLINUX with subcode TIOCL_SETSEL, in the selection modes TIOCL_SETPOINTER, TIOCL_SELCLEAR and TIOCL_SELMOUSEREPORT. TIOCL_SETSEL was previously changed to require CAP_SYS_ADMIN, as this IOCTL let callers change the selection buffer and could be used to simulate keypresses. These three TIOCL_SETSEL selection modes, however, are safe to use, as they do not modify the selection buffer. This fixes a mouse support regression that affected Emacs (invisible mouse cursor). Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/ee3ec63269b43b34e1c90dd8c9743bf8@finder.org Fixes: 8d1b43f6a6df ("tty: Restrict access to TIOCLINUX' copy-and-paste subcommands") Signed-off-by: Günther Noack <gnoack(a)google.com> --- Changes in V2: * Removed comment in vt.c (per Greg's suggestion) * CC'd stable@ * I *kept* the CAP_SYS_ADMIN check *after* copy_from_user(), with the reasoning that: 1. I do not see a good alternative to reorder the code here. We need the data from copy_from_user() in order to know whether the CAP_SYS_ADMIN check even needs to be performed. 2. A previous get_user() from an adjacent memory region already worked (making this a very unlikely failure) I would still appreciate a more formal Tested-by from Hanno (hint, hint) :) --- drivers/tty/vt/selection.c | 14 ++++++++++++++ drivers/tty/vt/vt.c | 2 -- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index 564341f1a74f..0bd6544e30a6 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -192,6 +192,20 @@ int set_selection_user(const struct tiocl_selection __user *sel, if (copy_from_user(&v, sel, sizeof(*sel))) return -EFAULT; + /* + * TIOCL_SELCLEAR, TIOCL_SELPOINTER and TIOCL_SELMOUSEREPORT are OK to + * use without CAP_SYS_ADMIN as they do not modify the selection. + */ + switch (v.sel_mode) { + case TIOCL_SELCLEAR: + case TIOCL_SELPOINTER: + case TIOCL_SELMOUSEREPORT: + break; + default: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + } + return set_selection_kernel(&v, tty); } diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 96842ce817af..be5564ed8c01 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -3345,8 +3345,6 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) switch (type) { case TIOCL_SETSEL: - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; return set_selection_user(param, tty); case TIOCL_PASTESEL: if (!capable(CAP_SYS_ADMIN)) -- 2.47.1.613.gc27f4b7a9f-goog

3 months, 1 week

6
13
0 0

[PATCH v2] arm64: dts: ti: k3-j784s4-j742s2-main-common: Fix serdes_ln_ctrl reg-masks

by Siddharth Vadapalli

Commit under Fixes added the 'idle-states' property for SERDES4 lane muxes without defining the corresponding register offsets and masks for it in the 'mux-reg-masks' property within the 'serdes_ln_ctrl' node. Fix this. Fixes: 7287d423f138 ("arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane mux") Cc: stable(a)vger.kernel.org Signed-off-by: Siddharth Vadapalli <s-vadapalli(a)ti.com> --- Patch is based on commit 76544811c850 Merge tag 'drm-fixes-2025-02-28' of https://gitlab.freedesktop.org/drm/kernel of the master branch of Mainline Linux. v1: https://patchwork.kernel.org/project/linux-arm-kernel/patch/20250227061643.… Changes since v1: - Updated offsets to begin from 0x40 instead of 0x30. This is because SERDES3 is not present in J784S4. Regards, Siddharth. arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi index 83bbf94b58d1..51cb8f3fd1c8 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi @@ -84,7 +84,9 @@ serdes_ln_ctrl: mux-controller@4080 { <0x10 0x3>, <0x14 0x3>, /* SERDES1 lane0/1 select */ <0x18 0x3>, <0x1c 0x3>, /* SERDES1 lane2/3 select */ <0x20 0x3>, <0x24 0x3>, /* SERDES2 lane0/1 select */ - <0x28 0x3>, <0x2c 0x3>; /* SERDES2 lane2/3 select */ + <0x28 0x3>, <0x2c 0x3>, /* SERDES2 lane2/3 select */ + <0x40 0x3>, <0x44 0x3>, /* SERDES4 lane0/1 select */ + <0x48 0x3>, <0x4c 0x3>; /* SERDES4 lane2/3 select */ idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>, <J784S4_SERDES0_LANE2_IP3_UNUSED>, -- 2.34.1

3 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 879f70382ff3e92fc854589ada3453e3f5f5b601 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025022418-clergyman-hacker-f7f7@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 879f70382ff3e92fc854589ada3453e3f5f5b601 Mon Sep 17 00:00:00 2001 From: Imre Deak <imre.deak(a)intel.com> Date: Fri, 14 Feb 2025 16:19:51 +0200 Subject: [PATCH] drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro The format of the port width field in the DDI_BUF_CTL and the TRANS_DDI_FUNC_CTL registers are different starting with MTL, where the x3 lane mode for HDMI FRL has a different encoding in the two registers. To account for this use the TRANS_DDI_FUNC_CTL's own port width macro. Cc: <stable(a)vger.kernel.org> # v6.5+ Fixes: b66a8abaa48a ("drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI") Reviewed-by: Jani Nikula <jani.nikula(a)intel.com> Signed-off-by: Imre Deak <imre.deak(a)intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-2-imre.… (cherry picked from commit 76120b3a304aec28fef4910204b81a12db8974da) Signed-off-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c index c977b74f82f0..82bf6c654de2 100644 --- a/drivers/gpu/drm/i915/display/icl_dsi.c +++ b/drivers/gpu/drm/i915/display/icl_dsi.c @@ -809,8 +809,8 @@ gen11_dsi_configure_transcoder(struct intel_encoder *encoder, /* select data lane width */ tmp = intel_de_read(display, TRANS_DDI_FUNC_CTL(display, dsi_trans)); - tmp &= ~DDI_PORT_WIDTH_MASK; - tmp |= DDI_PORT_WIDTH(intel_dsi->lane_count); + tmp &= ~TRANS_DDI_PORT_WIDTH_MASK; + tmp |= TRANS_DDI_PORT_WIDTH(intel_dsi->lane_count); /* select input pipe */ tmp &= ~TRANS_DDI_EDP_INPUT_MASK;

3 months, 1 week

4
5
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror February 2025