February 2025 - Linux-stable-mirror

[PATCH v1 2/2] mm/slab/kvfree_rcu: Switch to WQ_MEM_RECLAIM wq

by Uladzislau Rezki (Sony)

Currently kvfree_rcu() APIs use a system workqueue which is "system_unbound_wq" to driver RCU machinery to reclaim a memory. Recently, it has been noted that the following kernel warning can be observed: <snip> workqueue: WQ_MEM_RECLAIM nvme-wq:nvme_scan_work is flushing !WQ_MEM_RECLAIM events_unbound:kfree_rcu_work WARNING: CPU: 21 PID: 330 at kernel/workqueue.c:3719 check_flush_dependency+0x112/0x120 Modules linked in: intel_uncore_frequency(E) intel_uncore_frequency_common(E) skx_edac(E) ... CPU: 21 UID: 0 PID: 330 Comm: kworker/u144:6 Tainted: G E 6.13.2-0_g925d379822da #1 Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM20 02/01/2023 Workqueue: nvme-wq nvme_scan_work RIP: 0010:check_flush_dependency+0x112/0x120 Code: 05 9a 40 14 02 01 48 81 c6 c0 00 00 00 48 8b 50 18 48 81 c7 c0 00 00 00 48 89 f9 48 ... RSP: 0018:ffffc90000df7bd8 EFLAGS: 00010082 RAX: 000000000000006a RBX: ffffffff81622390 RCX: 0000000000000027 RDX: 00000000fffeffff RSI: 000000000057ffa8 RDI: ffff88907f960c88 RBP: 0000000000000000 R08: ffffffff83068e50 R09: 000000000002fffd R10: 0000000000000004 R11: 0000000000000000 R12: ffff8881001a4400 R13: 0000000000000000 R14: ffff88907f420fb8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88907f940000(0000) knlGS:0000000000000000 CR2: 00007f60c3001000 CR3: 000000107d010005 CR4: 00000000007726f0 PKRU: 55555554 Call Trace: <TASK> ? __warn+0xa4/0x140 ? check_flush_dependency+0x112/0x120 ? report_bug+0xe1/0x140 ? check_flush_dependency+0x112/0x120 ? handle_bug+0x5e/0x90 ? exc_invalid_op+0x16/0x40 ? asm_exc_invalid_op+0x16/0x20 ? timer_recalc_next_expiry+0x190/0x190 ? check_flush_dependency+0x112/0x120 ? check_flush_dependency+0x112/0x120 __flush_work.llvm.1643880146586177030+0x174/0x2c0 flush_rcu_work+0x28/0x30 kvfree_rcu_barrier+0x12f/0x160 kmem_cache_destroy+0x18/0x120 bioset_exit+0x10c/0x150 disk_release.llvm.6740012984264378178+0x61/0xd0 device_release+0x4f/0x90 kobject_put+0x95/0x180 nvme_put_ns+0x23/0xc0 nvme_remove_invalid_namespaces+0xb3/0xd0 nvme_scan_work+0x342/0x490 process_scheduled_works+0x1a2/0x370 worker_thread+0x2ff/0x390 ? pwq_release_workfn+0x1e0/0x1e0 kthread+0xb1/0xe0 ? __kthread_parkme+0x70/0x70 ret_from_fork+0x30/0x40 ? __kthread_parkme+0x70/0x70 ret_from_fork_asm+0x11/0x20 </TASK> ---[ end trace 0000000000000000 ]--- <snip> To address this switch to use of independent WQ_MEM_RECLAIM workqueue, so the rules are not violated from workqueue framework point of view. Apart of that, since kvfree_rcu() does reclaim memory it is worth to go with WQ_MEM_RECLAIM type of wq because it is designed for this purpose. Cc: <stable(a)vger.kernel.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Keith Busch <kbusch(a)kernel.org> Closes: https://www.spinics.net/lists/kernel/msg5563270.html Fixes: 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"), Reported-by: Keith Busch <kbusch(a)kernel.org> Signed-off-by: Uladzislau Rezki (Sony) <urezki(a)gmail.com> --- mm/slab_common.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/mm/slab_common.c b/mm/slab_common.c index 4030907b6b7d..4c9f0a87f733 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -1304,6 +1304,8 @@ module_param(rcu_min_cached_objs, int, 0444); static int rcu_delay_page_cache_fill_msec = 5000; module_param(rcu_delay_page_cache_fill_msec, int, 0444); +static struct workqueue_struct *rcu_reclaim_wq; + /* Maximum number of jiffies to wait before draining a batch. */ #define KFREE_DRAIN_JIFFIES (5 * HZ) #define KFREE_N_BATCHES 2 @@ -1632,10 +1634,10 @@ __schedule_delayed_monitor_work(struct kfree_rcu_cpu *krcp) if (delayed_work_pending(&krcp->monitor_work)) { delay_left = krcp->monitor_work.timer.expires - jiffies; if (delay < delay_left) - mod_delayed_work(system_unbound_wq, &krcp->monitor_work, delay); + mod_delayed_work(rcu_reclaim_wq, &krcp->monitor_work, delay); return; } - queue_delayed_work(system_unbound_wq, &krcp->monitor_work, delay); + queue_delayed_work(rcu_reclaim_wq, &krcp->monitor_work, delay); } static void @@ -1733,7 +1735,7 @@ kvfree_rcu_queue_batch(struct kfree_rcu_cpu *krcp) // "free channels", the batch can handle. Break // the loop since it is done with this CPU thus // queuing an RCU work is _always_ success here. - queued = queue_rcu_work(system_unbound_wq, &krwp->rcu_work); + queued = queue_rcu_work(rcu_reclaim_wq, &krwp->rcu_work); WARN_ON_ONCE(!queued); break; } @@ -1883,7 +1885,7 @@ run_page_cache_worker(struct kfree_rcu_cpu *krcp) if (rcu_scheduler_active == RCU_SCHEDULER_RUNNING && !atomic_xchg(&krcp->work_in_progress, 1)) { if (atomic_read(&krcp->backoff_page_cache_fill)) { - queue_delayed_work(system_unbound_wq, + queue_delayed_work(rcu_reclaim_wq, &krcp->page_cache_work, msecs_to_jiffies(rcu_delay_page_cache_fill_msec)); } else { @@ -2120,6 +2122,10 @@ void __init kvfree_rcu_init(void) int i, j; struct shrinker *kfree_rcu_shrinker; + rcu_reclaim_wq = alloc_workqueue("kvfree_rcu_reclaim", + WQ_UNBOUND | WQ_MEM_RECLAIM, 0); + WARN_ON(!rcu_reclaim_wq); + /* Clamp it to [0:100] seconds interval. */ if (rcu_delay_page_cache_fill_msec < 0 || rcu_delay_page_cache_fill_msec > 100 * MSEC_PER_SEC) { -- 2.39.5

3 months, 2 weeks

5
5
0 0

[PATCH] arm64: tegra: delete the Orin NX/Nano suspend key

by Ivy Huang

From: Ninad Malwade <nmalwade(a)nvidia.com> As per the Orin Nano Dev Kit schematic, GPIO_G.02 is not available on this device family. It should not be used at all on Orin NX/Nano. Having this unused pin mapped as the suspend key can lead to unpredictable behavior for low power modes. Orin NX/Nano uses GPIO_EE.04 as both a "power" button and a "suspend" button. However, we cannot have two gpio-keys mapped to the same GPIO. Therefore delete the "suspend" key. Cc: stable(a)vger.kernel.org Fixes: e63472eda5ea ("arm64: tegra: Support Jetson Orin NX reference platform") Signed-off-by: Ninad Malwade <nmalwade(a)nvidia.com> Signed-off-by: Ivy Huang <yijuh(a)nvidia.com> --- arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi index 19340d13f789..41821354bbda 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi @@ -227,13 +227,6 @@ wakeup-event-action = <EV_ACT_ASSERTED>; wakeup-source; }; - - key-suspend { - label = "Suspend"; - gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_SLEEP>; - }; }; fan: pwm-fan { -- 2.17.1

3 months, 2 weeks

2
1
0 0

[PATCH v1] usb: core: fix pipe creation for get_bMaxPacketSize0

by Stefan Eichenberger

From: Stefan Eichenberger <stefan.eichenberger(a)toradex.com> When usb_control_msg is used in the get_bMaxPacketSize0 function, the USB pipe does not include the endpoint device number. This can cause failures when a usb hub port is reinitialized after encountering a bad cable connection. As a result, the system logs the following error messages: usb usb2-port1: cannot reset (err = -32) usb usb2-port1: Cannot enable. Maybe the USB cable is bad? usb usb2-port1: attempt power cycle usb 2-1: new high-speed USB device number 5 using ci_hdrc usb 2-1: device descriptor read/8, error -71 The problem began after commit 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads"). There usb_get_device_descriptor was replaced with get_bMaxPacketSize0. Unlike usb_get_device_descriptor, the get_bMaxPacketSize0 function uses the macro usb_rcvaddr0pipe, which does not include the endpoint device number. usb_get_device_descriptor, on the other hand, used the macro usb_rcvctrlpipe, which includes the endpoint device number. By modifying the get_bMaxPacketSize0 function to use usb_rcvctrlpipe instead of usb_rcvaddr0pipe, the issue can be resolved. This change will ensure that the endpoint device number is included in the USB pipe, preventing reinitialization failures. If the endpoint has not set the device number yet, it will still work because the device number is 0 in udev. Cc: stable(a)vger.kernel.org Fixes: 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads") Signed-off-by: Stefan Eichenberger <stefan.eichenberger(a)toradex.com> --- Before commit 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads") usb_rcvaddr0pipe was used in hub_port_init. With this proposed change, usb_rcvctrlpipe will be used which includes devnum for the pipe. I'm not sure if this might have some side effects. However, my understanding is that devnum is set to the right value (might also be 0 if not initialised) before get_bMaxPacketSize0 is called. Therefore, this should work but please let me know if I'm wrong on this. --- drivers/usb/core/hub.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c3f839637cb5..59e38780f76d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4698,7 +4698,6 @@ void usb_ep0_reinit(struct usb_device *udev) EXPORT_SYMBOL_GPL(usb_ep0_reinit); #define usb_sndaddr0pipe() (PIPE_CONTROL << 30) -#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN) static int hub_set_address(struct usb_device *udev, int devnum) { @@ -4804,7 +4803,7 @@ static int get_bMaxPacketSize0(struct usb_device *udev, for (i = 0; i < GET_MAXPACKET0_TRIES; ++i) { /* Start with invalid values in case the transfer fails */ buf->bDescriptorType = buf->bMaxPacketSize0 = 0; - rc = usb_control_msg(udev, usb_rcvaddr0pipe(), + rc = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, USB_DT_DEVICE << 8, 0, buf, size, -- 2.45.2

3 months, 2 weeks

3
4
0 0

[PATCH 5.10.y 0/3] vsock: fix use-after free and null-ptr-deref

by Luigi Leonardi

Hi all, This series backports three upstream commits: - 135ffc7 "bpf, vsock: Invoke proto::close on close()" - fcdd224 "vsock: Keep the binding until socket destruction" - 78dafe1 "vsock: Orphan socket after transport release" Although this version of the kernel does not support sockmap, I think backporting this patch can be useful to reduce conflicts in future backports [1]. It does not harm the system. The comment it introduces in the code can be misleading. I added some words in the commit to explain the situation. The other two commits are untouched, fixing a use-after free[2] and a null-ptr-deref[3] respectively. [1]https://lore.kernel.org/stable/f7lr3ftzo66sl6phlcygh4xx4spga4b6je37fhawjr… [2]https://lore.kernel.org/all/20250128-vsock-transport-vs-autobind-v3-0-1cf… [3]https://lore.kernel.org/all/20250210-vsock-linger-nullderef-v3-0-ef6244d0… Cheers, Luigi To: Stefano Garzarella <sgarzare(a)redhat.com> To: Michal Luczaj <mhal(a)rbox.co> To: stable(a)vger.kernel.org Signed-off-by: Luigi Leonardi <leonardi(a)redhat.com> --- Michal Luczaj (3): bpf, vsock: Invoke proto::close on close() vsock: Keep the binding until socket destruction vsock: Orphan socket after transport release net/vmw_vsock/af_vsock.c | 77 +++++++++++++++++++++++++++++++----------------- 1 file changed, 50 insertions(+), 27 deletions(-) --- base-commit: f0a53361993a94f602df6f35e78149ad2ac12c89 change-id: 20250220-backport_fix_5_10-0ae85f834bc4 Best regards, -- Luigi Leonardi <leonardi(a)redhat.com>

3 months, 2 weeks

2
5
0 0

[PATCHv3 perf/core] uprobes: Harden uretprobe syscall trampoline check

by Jiri Olsa

Jann reported [1] possible issue when trampoline_check_ip returns address near the bottom of the address space that is allowed to call into the syscall if uretprobes are not set up. Though the mmap minimum address restrictions will typically prevent creating mappings there, let's make sure uretprobe syscall checks for that. [1] https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341… Cc: Kees Cook <kees(a)kernel.org> Cc: Eyal Birger <eyal.birger(a)gmail.com> Cc: stable(a)vger.kernel.org Fixes: ff474a78cef5 ("uprobe: Add uretprobe syscall to speed up return probe") Acked-by: Andrii Nakryiko <andrii(a)kernel.org> Reported-by: Jann Horn <jannh(a)google.com> Reviewed-by: Oleg Nesterov <oleg(a)redhat.com> Reviewed-by: Kees Cook <kees(a)kernel.org> Signed-off-by: Jiri Olsa <jolsa(a)kernel.org> --- v3 changes: - used ~0UL instead of -1 [Alexei] - used UPROBE_NO_TRAMPOLINE_VADDR in uprobe_get_trampoline_vaddr [Masami] - added unlikely [Andrii] - I kept the review/ack tags, because I think the change is basically the same, please scream otherwise arch/x86/kernel/uprobes.c | 14 +++++++++----- include/linux/uprobes.h | 2 ++ kernel/events/uprobes.c | 2 +- 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c index 5a952c5ea66b..9194695662b2 100644 --- a/arch/x86/kernel/uprobes.c +++ b/arch/x86/kernel/uprobes.c @@ -357,19 +357,23 @@ void *arch_uprobe_trampoline(unsigned long *psize) return &insn; } -static unsigned long trampoline_check_ip(void) +static unsigned long trampoline_check_ip(unsigned long tramp) { - unsigned long tramp = uprobe_get_trampoline_vaddr(); - return tramp + (uretprobe_syscall_check - uretprobe_trampoline_entry); } SYSCALL_DEFINE0(uretprobe) { struct pt_regs *regs = task_pt_regs(current); - unsigned long err, ip, sp, r11_cx_ax[3]; + unsigned long err, ip, sp, r11_cx_ax[3], tramp; + + /* If there's no trampoline, we are called from wrong place. */ + tramp = uprobe_get_trampoline_vaddr(); + if (unlikely(tramp == UPROBE_NO_TRAMPOLINE_VADDR)) + goto sigill; - if (regs->ip != trampoline_check_ip()) + /* Make sure the ip matches the only allowed sys_uretprobe caller. */ + if (unlikely(regs->ip != trampoline_check_ip(tramp))) goto sigill; err = copy_from_user(r11_cx_ax, (void __user *)regs->sp, sizeof(r11_cx_ax)); diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h index a40efdda9052..2e46b69ff0a6 100644 --- a/include/linux/uprobes.h +++ b/include/linux/uprobes.h @@ -39,6 +39,8 @@ struct page; #define MAX_URETPROBE_DEPTH 64 +#define UPROBE_NO_TRAMPOLINE_VADDR (~0UL) + struct uprobe_consumer { /* * handler() can return UPROBE_HANDLER_REMOVE to signal the need to diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 597b9e036e5f..c5d6307bc5bc 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -2156,8 +2156,8 @@ void uprobe_copy_process(struct task_struct *t, unsigned long flags) */ unsigned long uprobe_get_trampoline_vaddr(void) { + unsigned long trampoline_vaddr = UPROBE_NO_TRAMPOLINE_VADDR; struct xol_area *area; - unsigned long trampoline_vaddr = -1; /* Pairs with xol_add_vma() smp_store_release() */ area = READ_ONCE(current->mm->uprobes_state.xol_area); /* ^^^ */ -- 2.48.1

3 months, 2 weeks

7
9
0 0

Linux 5.10.234

by Greg Kroah-Hartman

I'm announcing the release of the 5.10.234 kernel. All users of the 5.10 kernel series must upgrade. The updated 5.10.y git tree can be found at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-5.10.y and can be browsed at the normal kernel.org git web browser: https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary thanks, greg k-h ------------ Makefile | 2 arch/arm64/boot/dts/rockchip/px30.dtsi | 8 + arch/arm64/boot/dts/rockchip/rk3328.dtsi | 4 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 20 ++++ arch/m68k/fpsp040/skeleton.S | 3 arch/m68k/kernel/entry.S | 2 arch/m68k/kernel/traps.c | 2 arch/riscv/kernel/traps.c | 6 - arch/x86/include/asm/special_insns.h | 2 arch/x86/xen/xen-asm.S | 2 block/genhd.c | 13 +- drivers/acpi/resource.c | 18 +++ drivers/block/loop.c | 8 - drivers/block/virtio_blk.c | 2 drivers/block/xen-blkfront.c | 2 drivers/gpio/gpiolib-cdev.c | 2 drivers/gpu/drm/amd/display/dc/dc.h | 2 drivers/gpu/drm/amd/display/dc/dml/dml_inline_defs.h | 8 + drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 17 +-- drivers/gpu/drm/bridge/adv7511/adv7533.c | 38 ++----- drivers/gpu/drm/drm_mipi_dsi.c | 81 ++++++++++++++++ drivers/gpu/drm/radeon/radeon_gem.c | 2 drivers/gpu/drm/v3d/v3d_irq.c | 12 ++ drivers/i2c/busses/i2c-rcar.c | 20 +++- drivers/i2c/muxes/i2c-demux-pinctrl.c | 4 drivers/iio/adc/at91_adc.c | 2 drivers/iio/adc/rockchip_saradc.c | 2 drivers/iio/adc/ti-ads124s08.c | 4 drivers/iio/adc/ti-ads8688.c | 2 drivers/iio/dummy/iio_simple_dummy_buffer.c | 2 drivers/iio/gyro/fxas21002c_core.c | 9 + drivers/iio/imu/inv_icm42600/inv_icm42600.h | 1 drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 18 +++ drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c | 3 drivers/iio/imu/kmx61.c | 2 drivers/iio/inkern.c | 2 drivers/iio/light/vcnl4035.c | 2 drivers/iio/pressure/zpa2326.c | 2 drivers/infiniband/hw/hns/hns_roce_main.c | 1 drivers/infiniband/hw/hns/hns_roce_srq.c | 6 - drivers/input/joystick/xpad.c | 2 drivers/input/keyboard/atkbd.c | 2 drivers/irqchip/irq-gic-v3.c | 2 drivers/irqchip/irq-sunxi-nmi.c | 3 drivers/md/dm-ebs-target.c | 2 drivers/md/dm-thin.c | 5 - drivers/md/persistent-data/dm-array.c | 19 ++- drivers/md/raid5.c | 14 +- drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 19 --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 5 - drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 95 +++++++++++++++---- drivers/net/ethernet/netronome/nfp/bpf/offload.c | 3 drivers/net/ethernet/ti/cpsw_ale.c | 14 +- drivers/net/gtp.c | 42 +++++--- drivers/net/ieee802154/ca8210.c | 6 + drivers/net/wireless/intel/iwlwifi/dvm/rs.c | 7 + drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 9 + drivers/nvme/host/core.c | 5 - drivers/nvme/target/io-cmd-bdev.c | 2 drivers/pci/controller/pci-host-common.c | 4 drivers/pci/probe.c | 20 ++-- drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 53 ++++++++-- drivers/phy/broadcom/phy-brcm-usb-init.h | 1 drivers/phy/broadcom/phy-brcm-usb.c | 8 + drivers/scsi/scsi_transport_iscsi.c | 4 drivers/scsi/sd.c | 9 - drivers/scsi/sg.c | 2 drivers/staging/iio/frequency/ad9832.c | 2 drivers/staging/iio/frequency/ad9834.c | 2 drivers/usb/class/usblp.c | 7 - drivers/usb/core/hub.c | 6 - drivers/usb/core/port.c | 7 - drivers/usb/dwc3/core.h | 1 drivers/usb/dwc3/gadget.c | 4 drivers/usb/gadget/function/f_fs.c | 2 drivers/usb/host/xhci-pci.c | 4 drivers/usb/serial/cp210x.c | 1 drivers/usb/serial/option.c | 4 drivers/usb/serial/quatech2.c | 2 drivers/usb/storage/unusual_devs.h | 7 + drivers/vfio/platform/vfio_platform_common.c | 10 ++ fs/afs/afs.h | 2 fs/afs/afs_vl.h | 1 fs/afs/vl_alias.c | 8 + fs/afs/vlclient.c | 2 fs/ceph/mds_client.c | 9 - fs/exfat/dir.c | 3 fs/file.c | 1 fs/gfs2/file.c | 1 fs/hfs/super.c | 4 fs/jbd2/commit.c | 4 fs/nfsd/filecache.c | 18 ++- fs/nfsd/filecache.h | 1 fs/ocfs2/quota_global.c | 2 fs/ocfs2/quota_local.c | 10 -- fs/proc/vmcore.c | 2 include/drm/drm_mipi_dsi.h | 4 include/linux/blk-cgroup.h | 6 + include/linux/genhd.h | 3 include/linux/hrtimer.h | 1 include/linux/mlx5/device.h | 2 include/linux/mlx5/fs.h | 2 include/linux/poll.h | 10 +- include/linux/seccomp.h | 2 include/linux/usb.h | 3 include/linux/usb/hcd.h | 2 include/net/inet_connection_sock.h | 2 include/net/net_namespace.h | 3 include/net/netfilter/nf_tables.h | 2 kernel/cpu.c | 2 kernel/gen_kheaders.sh | 1 kernel/time/hrtimer.c | 11 ++ mm/vmalloc.c | 3 net/802/psnap.c | 4 net/bluetooth/rfcomm/sock.c | 14 +- net/core/filter.c | 30 +++--- net/core/net_namespace.c | 83 ++++++++++------ net/dccp/ipv6.c | 2 net/ipv4/fou.c | 2 net/ipv4/ip_tunnel.c | 2 net/ipv6/route.c | 2 net/ipv6/tcp_ipv6.c | 4 net/mac802154/iface.c | 4 net/netfilter/nf_conntrack_core.c | 5 - net/netfilter/nf_tables_api.c | 38 ++++++- net/netfilter/nft_dynset.c | 7 + net/sched/cls_flow.c | 3 net/sched/sch_ets.c | 2 net/sctp/sysctl.c | 9 + net/tls/tls_sw.c | 2 net/vmw_vsock/af_vsock.c | 15 +++ net/vmw_vsock/virtio_transport_common.c | 36 +++++-- scripts/sorttable.h | 10 +- sound/soc/codecs/Kconfig | 1 sound/soc/mediatek/common/mtk-afe-platform-driver.c | 4 sound/soc/samsung/Kconfig | 6 - 137 files changed, 813 insertions(+), 354 deletions(-) Aharon Landau (1): net/mlx5: Add priorities for counters in RDMA namespaces Ahmad Fatoum (1): drm: bridge: adv7511: use dev_err_probe in probe function Akash M (1): usb: gadget: f_fs: Remove WARN_ON in functionfs_bind Al Cooper (1): phy: usb: Add "wake on" functionality for newer Synopsis XHCI controllers Al Viro (1): m68k: Update ->thread.esp0 before calling syscall_trace() in ret_from_signal Alex Williamson (1): vfio/platform: check the bounds of read/write syscalls Alvin Šipraga (1): drm: bridge: adv7511: unregister cec i2c device after cec adapter Andreas Gruenbacher (1): gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag André Draszik (1): usb: dwc3: gadget: fix writing NYET threshold Anjaneyulu (1): wifi: iwlwifi: add a few rate index validity checks Antonio Pastor (1): net: 802: LLC+SNAP OID:PID lookup on start of skb data Anumula Murali Mohan Reddy (1): cxgb4: Avoid removal of uninserted tid Arnd Bergmann (1): xhci: use pm_ptr() instead of #ifdef for CONFIG_PM conditionals Benjamin Coddington (1): tls: Fix tls_sw_sendmsg error handling Biju Das (1): drm: adv7511: Fix use-after-free in adv7533_attach_dsi() Carlos Song (1): iio: gyro: fxas21002c: Fix missing data update in trigger handler Charles Keepax (3): ASoC: wm8994: Add depends on MFD core ASoC: samsung: Add missing selects for MFD_WM8994 ASoC: samsung: Add missing depends on I2C Chen-Yu Tsai (1): ASoC: mediatek: disable buffer pre-allocation Chengchang Tang (1): RDMA/hns: Fix deadlock on SRQ async events. Christoph Hellwig (4): loop: let set_capacity_revalidate_and_notify update the bdev size nvme: let set_capacity_revalidate_and_notify update the bdev size sd: update the bdev size in sd_revalidate_disk block: remove the update_bdev parameter to set_capacity_revalidate_and_notify Chukun Pan (1): USB: serial: option: add MeiG Smart SRM815 Dan Carpenter (1): nfp: bpf: prevent integer overflow in nfp_bpf_event_output() David Howells (2): afs: Fix the maximum cell name length kheaders: Ignore silly-rename files Dennis Lam (1): ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv Eric Dumazet (4): net_sched: cls_flow: validate TCA_FLOW_RSHIFT attribute net: add exit_batch_rtnl() method gtp: use exit_batch_rtnl() method ipv6: avoid possible NULL deref in rt6_uncached_list_flush_dev() Eric W. Biederman (1): signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die Fabio Estevam (1): iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep() Greg Kroah-Hartman (2): Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null" Linux 5.10.234 Gui-Dong Han (1): md/raid5: fix atomicity violation in raid5_cache_count Hans de Goede (2): ACPI: resource: Add TongFang GM5HG0A to irq1_edge_low_force_override[] ACPI: resource: Add Asus Vivobook X1504VAP to irq1_level_low_skip_override[] Heiner Kallweit (1): net: ethernet: xgbe: re-add aneg to supported features in PHY quirks Ido Schimmel (1): ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_find() Jack Greiner (1): Input: xpad - add support for wooting two he (arm) Jamal Hadi Salim (1): net: sched: fix ets qdisc OOB Indexing Jason Xing (1): tcp/dccp: complete lockless accesses to sk->sk_max_ack_backlog Javier Carrasco (6): iio: pressure: zpa2326: fix information leak in triggered buffer iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer iio: light: vcnl4035: fix information leak in triggered buffer iio: imu: kmx61: fix information leak in triggered buffer iio: adc: ti-ads8688: fix information leak in triggered buffer iio: adc: rockchip_saradc: fix information leak in triggered buffer Jean-Baptiste Maneyrol (2): iio: imu: inv_icm42600: fix spi burst write not supported iio: imu: inv_icm42600: fix timestamps after suspend if sensor is on Joe Hattori (2): iio: adc: at91: call input_free_device() on allocated iio_dev iio: inkern: call iio_device_put() only on mapped devices Johan Hovold (1): USB: serial: cp210x: add Phoenix Contact UPS Device Johan Jonker (1): arm64: dts: rockchip: add #power-domain-cells to power domain nodes Joseph Qi (1): ocfs2: correct return value of ocfs2_local_free_info() Juergen Gross (2): x86/asm: Make serialize() always_inline x86/xen: fix SLS mitigation in xen_hypercall_iret() Jun Yan (1): USB: usblp: return error when setting unsupported protocol Justin Chen (3): phy: usb: Toggle the PHY power during init phy: usb: Use slow clock for wake enabled suspend phy: usb: Fix clock imbalance for suspend/resume Kai-Heng Feng (1): USB: core: Disable LPM only for non-suspended ports Keisuke Nishimura (1): ieee802154: ca8210: Add missing check for kfifo_alloc() in ca8210_probe() Koichiro Den (1): hrtimers: Handle CPU state correctly on hotplug Krister Johansen (1): dm thin: make get_first_thin use rcu-safe list first function Kuan-Wei Chiu (1): scripts/sorttable: fix orc_sort_cmp() to maintain symmetry and transitivity Kuniyuki Iwashima (2): gtp: Use for_each_netdev_rcu() in gtp_genl_dump_pdp(). gtp: Destroy device along with udp socket's netns dismantle. Leo Stone (1): hfs: Sanity check the root record Lianqin Hu (1): usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null Linus Walleij (1): seccomp: Stub for !CONFIG_SECCOMP Lizhi Xu (1): mac802154: check local interfaces before deleting sdata list Lubomir Rintel (1): usb-storage: Add max sectors quirk for Nokia 208 Luis Chamberlain (1): nvmet: propagate npwg topology Luiz Augusto von Dentz (1): Bluetooth: RFCOMM: Fix not validating setsockopt user input Ma Ke (1): usb: fix reference leak in usb_new_device() Maor Gottlieb (1): net/mlx5: Refactor mlx5_get_flow_namespace Mark Pearson (1): Input: atkbd - map F23 key to support default copilot shortcut Matthew Wilcox (Oracle) (1): vmalloc: fix accounting with i915 Matthieu Baerts (NGI0) (3): sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy sctp: sysctl: auth_enable: avoid using current->nsproxy sctp: sysctl: rto_min/max: avoid using current->nsproxy Max Kellermann (1): ceph: give up on paths longer than PATH_MAX Maxime Ripard (3): drm/mipi-dsi: Create devm device registration drm/mipi-dsi: Create devm device attachment drm/bridge: adv7533: Switch to devm MIPI-DSI helpers Maíra Canal (2): drm/v3d: Ensure job pointer is set to NULL after job completion drm/v3d: Assign job pointer to NULL before signaling the fence Melissa Wen (1): drm/amd/display: increase MAX_SURFACES to the value supported by hw Michal Hrusecky (1): USB: serial: option: add Neoway N723-EA support Michal Luczaj (1): bpf: Fix bpf_sk_select_reuseport() memory leak Mikulas Patocka (1): dm-ebs: don't set the flag DM_TARGET_PASSES_INTEGRITY Ming-Hung Tsai (3): dm array: fix releasing a faulty array block twice in dm_array_cursor_end dm array: fix unreleased btree blocks on closing a faulty array cursor dm array: fix cursor index when skipping across block boundaries Nam Cao (1): riscv: Fix sleeping in invalid context in die() Nilton Perim Neto (1): Input: xpad - add unofficial Xbox 360 wireless receiver clone Oleg Nesterov (1): poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll() Pablo Neira Ayuso (3): netfilter: nft_dynset: honor stateful expressions in set definition netfilter: nf_tables: imbalance in flowtable binding netfilter: conntrack: clamp maximum hashtable size to INT_MAX Patrisious Haddad (1): net/mlx5: Fix RDMA TX steering prio Peter Geis (1): arm64: dts: rockchip: add hevc power domain clock to rk3328 Philippe Simons (1): irqchip/sunxi-nmi: Add missing SKIP_WAKE flag Pierre-Eric Pelloux-Prayer (1): drm/radeon: check bo_va->bo is non-NULL before using it Qasim Ijaz (1): USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb() Rik van Riel (1): fs/proc: fix softlockup in __read_vmcore (part 2) Roman Li (1): drm/amd/display: Add check for granularity in dml ceil/floor helpers Ron Economos (1): Partial revert of xhci: use pm_ptr() instead #ifdef for CONFIG_PM conditionals Stefano Garzarella (4): vsock/virtio: cancel close work in the destructor vsock: reset socket state when de-assigning the transport vsock/virtio: discard packets if the transport changes vsock: prevent null-ptr-deref in vsock_*[has_data|has_space] Sudheer Kumar Doredla (1): net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field() Suraj Sonawane (1): scsi: sg: Fix slab-use-after-free read in sg_release() Tejun Heo (1): blk-cgroup: Fix UAF in blkcg_unpin_online() Terry Tritton (1): Revert "PCI: Use preserve_config in place of pci_flags" Wang Liang (1): net: fix data-races around sk->sk_forward_alloc Willem de Bruijn (1): fou: remove warn in gue_gro_receive on unsupported protocol Wolfram Sang (2): i2c: mux: demux-pinctrl: check initial mux selection, too i2c: rcar: fix NACK handling when being a target Xiang Zhang (1): scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS request Xu Wang (1): drm: bridge: adv7511: Remove redundant null check before clk_disable_unprepare Yajun Deng (1): net: net_namespace: Optimize the code Yogesh Lal (1): irqchip/gic-v3: Handle CPU_PM_ENTER_FAILED correctly Youzhong Yang (1): nfsd: add list_head nf_gc to struct nfsd_file Yuezhang Mo (1): exfat: fix the infinite loop in exfat_readdir() Zhang Kunbo (1): fs: fix missing declaration of init_files Zhang Yi (1): jbd2: flush filesystem device before updating tail sequence Zhongqiu Duan (1): tcp/dccp: allow a connection when sk_max_ack_backlog is zero Zhongqiu Han (1): gpiolib: cdev: Fix use after free in lineinfo_changed_notify Zicheng Qu (2): staging: iio: ad9834: Correct phase range check staging: iio: ad9832: Correct phase range check

3 months, 2 weeks

3
3
0 0

[PATCH v2 2/2] clk: samsung: update PLL locktime for PLL142XX used on FSD platform

by Varada Pavani

Currently PLL142XX locktime is 270. As per spec, it should be 150. Hence update PLL142XX controller locktime to 150. Cc: stable(a)vger.kernel.org Signed-off-by: Varada Pavani <v.pavani(a)samsung.com> --- drivers/clk/samsung/clk-pll.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c index 2e94bba6c396..023a25af73c4 100644 --- a/drivers/clk/samsung/clk-pll.c +++ b/drivers/clk/samsung/clk-pll.c @@ -206,6 +206,7 @@ static const struct clk_ops samsung_pll3000_clk_ops = { */ /* Maximum lock time can be 270 * PDIV cycles */ #define PLL35XX_LOCK_FACTOR (270) +#define PLL142XX_LOCK_FACTOR (150) #define PLL35XX_MDIV_MASK (0x3FF) #define PLL35XX_PDIV_MASK (0x3F) @@ -272,7 +273,11 @@ static int samsung_pll35xx_set_rate(struct clk_hw *hw, unsigned long drate, } /* Set PLL lock time. */ - writel_relaxed(rate->pdiv * PLL35XX_LOCK_FACTOR, + if (pll->type == pll_142xx) + writel_relaxed(rate->pdiv * PLL142XX_LOCK_FACTOR, + pll->lock_reg); + else + writel_relaxed(rate->pdiv * PLL35XX_LOCK_FACTOR, pll->lock_reg); /* Change PLL PMS values */ -- 2.17.1

3 months, 2 weeks

3
4
0 0

[PATCH 0/5] drm/xe: enable driver usage on non-4KiB kernels

by Mingcong Bai via B4 Relay

This patch series attempts to enable the use of xe DRM driver on non-4KiB kernel page platforms. This involves fixing the ttm/bo interface, as well as parts of the userspace API to make use of kernel `PAGE_SIZE' for alignment instead of the assumed `SZ_4K', it also fixes incorrect usage of `PAGE_SIZE' in the GuC and ring buffer interface code to make sure all instructions/commands were aligned to 4KiB barriers (per the Programmer's Manual for the GPUs covered by this DRM driver). This issue was first discovered and reported by members of the LoongArch user communities, whose hardware commonly ran on 16KiB-page kernels. The patch series began on an unassuming branch of a downstream kernel tree maintained by Shang Yatsen.[^1] It worked well but remained sparsely documented, a lot of the work done here relied on Shang Yatsen's original patch. AOSC OS then picked it up[^2] to provide Intel Xe/Arc support for users of its LoongArch port, for which I worked extensively on. After months of positive user feedback and from encouragement from Kexy Biscuit, my colleague at the community, I decided to examine its potential for upstreaming, cross-reference kernel and Intel documentation to better document and revise this patch. Now that this series has been tested good (for boot up, OpenGL, and playback of a standardised set of video samples[^3]... with the exception of the Intel Arc B580, which seems to segfault at intel-media-driver - iHD_drv_video.so, but strangely, hardware accelerated video playback works well with Firefox?) on the following platforms (motherboard + GPU model): - x86-64, 4KiB kernel page: - MS-7D42 + Intel Arc A580 - LoongArch, 16KiB kernel page: - XA61200 + GUNNIR DG1 Blue Halberd (Intel DG1) - XA61200 + ASRock Arc A380 Challenger ITX OC (Intel Arc 380) - XA61200 + Intel Arc 580 - XA61200 + GUNNIR Intel Arc A750 Photon 8G OC (Intel Arc A750) - ASUS XC-LS3A6M + GUNNIR Intel Arc B580 INDEX 12G (Intel Arc B580) On these platforms, basic functionalities tested good but the driver was unstable with occasional resets (I do suspect however, that this platform suffers from PCIe coherence issues, as instability only occurs under heavy VRAM I/O load): - AArch64, 4KiB/64KiB kernel pages: - ERUN-FD3000 (Phytium D3000) + GUNNIR Intel Arc A750 Photon 8G OC (Intel Arc A750) I think that this patch series is now ready for your comment and review. Please forgive me if I made any simple mistake or used wrong terminologies, but I have never worked on a patch for the DRM subsystem and my experience is still quite thin. But anyway, just letting you all know that Intel Xe/Arc works on non-4KiB kernel page platforms (and honestly, it's great to use, especially for games and media playback)! [^1]: https://github.com/FanFansfan/loongson-linux/tree/loongarch-xe [^2]: We maintained Shang Yatsen's patch until our v6.13.3 tree, until we decided to test and send this series upstream, https://github.com/AOSC-Tracking/linux/tree/aosc/v6.13.3 [^3]: Delicious hot pot! https://repo.aosc.io/ahvl/sample-videos-20250223.tar.zst Suggested-by: Kexy Biscuit <kexybiscuit(a)aosc.io> Co-developed-by: Shang Yatsen <429839446(a)qq.com> Signed-off-by: Shang Yatsen <429839446(a)qq.com> Signed-off-by: Mingcong Bai <jeffbai(a)aosc.io> --- Mingcong Bai (5): drm/xe/bo: fix alignment with non-4K kernel page sizes drm/xe/guc: use SZ_4K for alignment drm/xe/regs: fix RING_CTL_SIZE(size) calculation drm/xe: use 4K alignment for cursor jumps drm/xe/query: use PAGE_SIZE as the minimum page alignment drivers/gpu/drm/xe/regs/xe_engine_regs.h | 3 +-- drivers/gpu/drm/xe/xe_bo.c | 8 ++++---- drivers/gpu/drm/xe/xe_guc.c | 4 ++-- drivers/gpu/drm/xe/xe_guc_ads.c | 32 ++++++++++++++++---------------- drivers/gpu/drm/xe/xe_guc_capture.c | 8 ++++---- drivers/gpu/drm/xe/xe_guc_ct.c | 2 +- drivers/gpu/drm/xe/xe_guc_log.c | 4 ++-- drivers/gpu/drm/xe/xe_guc_pc.c | 4 ++-- drivers/gpu/drm/xe/xe_migrate.c | 4 ++-- drivers/gpu/drm/xe/xe_query.c | 2 +- include/uapi/drm/xe_drm.h | 2 +- 11 files changed, 36 insertions(+), 37 deletions(-) --- base-commit: d082ecbc71e9e0bf49883ee4afd435a77a5101b6 change-id: 20250226-xe-non-4k-fix-6b2eded0a564 Best regards, -- Mingcong Bai <jeffbai(a)aosc.io>

3 months, 2 weeks

7
25
0 0

FAILED: patch "[PATCH] drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 166ce267ae3f96e439d8ccc838e8ec4d8b4dab73 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025022456-vintage-hunter-6136@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 166ce267ae3f96e439d8ccc838e8ec4d8b4dab73 Mon Sep 17 00:00:00 2001 From: Imre Deak <imre.deak(a)intel.com> Date: Fri, 14 Feb 2025 16:19:52 +0200 Subject: [PATCH] drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL Fix the port width programming in the DDI_BUF_CTL register on MTLP+, where this had an off-by-one error. Cc: <stable(a)vger.kernel.org> # v6.5+ Fixes: b66a8abaa48a ("drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI") Reviewed-by: Jani Nikula <jani.nikula(a)intel.com> Signed-off-by: Imre Deak <imre.deak(a)intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-3-imre.… (cherry picked from commit b2ecdabe46d23db275f94cd7c46ca414a144818b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index acb986bc1f33..2b9240ab547d 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -3487,7 +3487,7 @@ static void intel_ddi_enable_hdmi(struct intel_atomic_state *state, intel_de_rmw(dev_priv, XELPDP_PORT_BUF_CTL1(dev_priv, port), XELPDP_PORT_WIDTH_MASK | XELPDP_PORT_REVERSAL, port_buf); - buf_ctl |= DDI_PORT_WIDTH(lane_count); + buf_ctl |= DDI_PORT_WIDTH(crtc_state->lane_count); if (DISPLAY_VER(dev_priv) >= 20) buf_ctl |= XE2LPD_DDI_BUF_D2D_LINK_ENABLE; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 765e6c0528fb..786c727aea45 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3633,7 +3633,7 @@ enum skl_power_gate { #define DDI_BUF_IS_IDLE (1 << 7) #define DDI_BUF_CTL_TC_PHY_OWNERSHIP REG_BIT(6) #define DDI_A_4_LANES (1 << 4) -#define DDI_PORT_WIDTH(width) (((width) - 1) << 1) +#define DDI_PORT_WIDTH(width) (((width) == 3 ? 4 : ((width) - 1)) << 1) #define DDI_PORT_WIDTH_MASK (7 << 1) #define DDI_PORT_WIDTH_SHIFT 1 #define DDI_INIT_DISPLAY_DETECTED (1 << 0)

3 months, 2 weeks

2
1
0 0

FAILED: patch "[PATCH] drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 879f70382ff3e92fc854589ada3453e3f5f5b601 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025022418-frostlike-congrats-bf0d@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 879f70382ff3e92fc854589ada3453e3f5f5b601 Mon Sep 17 00:00:00 2001 From: Imre Deak <imre.deak(a)intel.com> Date: Fri, 14 Feb 2025 16:19:51 +0200 Subject: [PATCH] drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro The format of the port width field in the DDI_BUF_CTL and the TRANS_DDI_FUNC_CTL registers are different starting with MTL, where the x3 lane mode for HDMI FRL has a different encoding in the two registers. To account for this use the TRANS_DDI_FUNC_CTL's own port width macro. Cc: <stable(a)vger.kernel.org> # v6.5+ Fixes: b66a8abaa48a ("drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI") Reviewed-by: Jani Nikula <jani.nikula(a)intel.com> Signed-off-by: Imre Deak <imre.deak(a)intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-2-imre.… (cherry picked from commit 76120b3a304aec28fef4910204b81a12db8974da) Signed-off-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c index c977b74f82f0..82bf6c654de2 100644 --- a/drivers/gpu/drm/i915/display/icl_dsi.c +++ b/drivers/gpu/drm/i915/display/icl_dsi.c @@ -809,8 +809,8 @@ gen11_dsi_configure_transcoder(struct intel_encoder *encoder, /* select data lane width */ tmp = intel_de_read(display, TRANS_DDI_FUNC_CTL(display, dsi_trans)); - tmp &= ~DDI_PORT_WIDTH_MASK; - tmp |= DDI_PORT_WIDTH(intel_dsi->lane_count); + tmp &= ~TRANS_DDI_PORT_WIDTH_MASK; + tmp |= TRANS_DDI_PORT_WIDTH(intel_dsi->lane_count); /* select input pipe */ tmp &= ~TRANS_DDI_EDP_INPUT_MASK;

3 months, 2 weeks

4
8
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror February 2025