June 2025 - Linux-stable-mirror

FAILED: patch "[PATCH] arm64: dts: qcom: x1e80100-crd: mark l12b and l15b always-on" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x abf89bc4bb09c16a53d693b09ea85225cf57ff39 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025060202-important-scribing-f981@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From abf89bc4bb09c16a53d693b09ea85225cf57ff39 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 14 Mar 2025 15:54:33 +0100 Subject: [PATCH] arm64: dts: qcom: x1e80100-crd: mark l12b and l15b always-on The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: bd50b1f5b6f3 ("arm64: dts: qcom: x1e80100: Add Compute Reference Device") Cc: stable(a)vger.kernel.org # 6.8 Cc: Abel Vesa <abel.vesa(a)linaro.org> Cc: Rajendra Nayak <quic_rjendra(a)quicinc.com> Cc: Sibi Sankar <quic_sibis(a)quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-2-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson(a)kernel.org> diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi index 5ea7b30983d9..f73f053a46a0 100644 --- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi @@ -606,6 +606,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -627,6 +628,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l16b_2p9: ldo16 {

4 weeks

1
0
0 0

FAILED: patch "[PATCH] arm64: dts: qcom: x1e80100-crd: mark l12b and l15b always-on" failed to apply to 6.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.15.y git checkout FETCH_HEAD git cherry-pick -x abf89bc4bb09c16a53d693b09ea85225cf57ff39 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025060201-licorice-bullfight-72d3@gregkh' --subject-prefix 'PATCH 6.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From abf89bc4bb09c16a53d693b09ea85225cf57ff39 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 14 Mar 2025 15:54:33 +0100 Subject: [PATCH] arm64: dts: qcom: x1e80100-crd: mark l12b and l15b always-on The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: bd50b1f5b6f3 ("arm64: dts: qcom: x1e80100: Add Compute Reference Device") Cc: stable(a)vger.kernel.org # 6.8 Cc: Abel Vesa <abel.vesa(a)linaro.org> Cc: Rajendra Nayak <quic_rjendra(a)quicinc.com> Cc: Sibi Sankar <quic_sibis(a)quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-2-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson(a)kernel.org> diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi index 5ea7b30983d9..f73f053a46a0 100644 --- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi @@ -606,6 +606,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -627,6 +628,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l16b_2p9: ldo16 {

4 weeks

1
0
0 0

FAILED: patch "[PATCH] arm64: dts: qcom: x1e78100-t14s: mark l12b and l15b always-on" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 673fa129e558c5f1196adb27d97ac90ddfe4f19c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025060255-dislike-elaborate-1e0f@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 673fa129e558c5f1196adb27d97ac90ddfe4f19c Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 14 Mar 2025 15:54:34 +0100 Subject: [PATCH] arm64: dts: qcom: x1e78100-t14s: mark l12b and l15b always-on The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 7d1cbe2f4985 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6") Cc: stable(a)vger.kernel.org # 6.12 Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-3-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson(a)kernel.org> diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index eff0e73640bc..160c052db1ec 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -456,6 +456,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -477,6 +478,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l17b_2p5: ldo17 {

4 weeks

1
0
0 0

FAILED: patch "[PATCH] arm64: dts: qcom: x1e78100-t14s: mark l12b and l15b always-on" failed to apply to 6.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.14.y git checkout FETCH_HEAD git cherry-pick -x 673fa129e558c5f1196adb27d97ac90ddfe4f19c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025060254-fling-reflex-4a17@gregkh' --subject-prefix 'PATCH 6.14.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 673fa129e558c5f1196adb27d97ac90ddfe4f19c Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 14 Mar 2025 15:54:34 +0100 Subject: [PATCH] arm64: dts: qcom: x1e78100-t14s: mark l12b and l15b always-on The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 7d1cbe2f4985 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6") Cc: stable(a)vger.kernel.org # 6.12 Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-3-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson(a)kernel.org> diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index eff0e73640bc..160c052db1ec 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -456,6 +456,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -477,6 +478,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l17b_2p5: ldo17 {

4 weeks

1
0
0 0

FAILED: patch "[PATCH] arm64: dts: qcom: x1e78100-t14s: mark l12b and l15b always-on" failed to apply to 6.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.15.y git checkout FETCH_HEAD git cherry-pick -x 673fa129e558c5f1196adb27d97ac90ddfe4f19c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025060254-gong-slimy-ea8d@gregkh' --subject-prefix 'PATCH 6.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 673fa129e558c5f1196adb27d97ac90ddfe4f19c Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 14 Mar 2025 15:54:34 +0100 Subject: [PATCH] arm64: dts: qcom: x1e78100-t14s: mark l12b and l15b always-on The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 7d1cbe2f4985 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6") Cc: stable(a)vger.kernel.org # 6.12 Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-3-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson(a)kernel.org> diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index eff0e73640bc..160c052db1ec 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -456,6 +456,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -477,6 +478,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l17b_2p5: ldo17 {

4 weeks

1
0
0 0

FAILED: patch "[PATCH] arm64: dts: qcom: x1e78100-t14s: fix missing HID supplies" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 55e52d055393f11ba0193975d3db87af36f4b273 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025060246-overstock-thumping-600e@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 55e52d055393f11ba0193975d3db87af36f4b273 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 14 Mar 2025 15:54:40 +0100 Subject: [PATCH] arm64: dts: qcom: x1e78100-t14s: fix missing HID supplies Add the missing HID supplies to avoid relying on other consumers to keep them on. This also avoids the following warnings on boot: i2c_hid_of 0-0010: supply vdd not found, using dummy regulator i2c_hid_of 0-0010: supply vddl not found, using dummy regulator i2c_hid_of 1-0015: supply vdd not found, using dummy regulator i2c_hid_of 1-002c: supply vdd not found, using dummy regulator i2c_hid_of 1-0015: supply vddl not found, using dummy regulator i2c_hid_of 1-002c: supply vddl not found, using dummy regulator i2c_hid_of 1-003a: supply vdd not found, using dummy regulator i2c_hid_of 1-003a: supply vddl not found, using dummy regulator Note that VCC3B is also used for things like the modem which are not yet described so mark the regulator as always-on for now. Fixes: 7d1cbe2f4985 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6") Cc: stable(a)vger.kernel.org # 6.12 Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-9-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson(a)kernel.org> diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index 160c052db1ec..962fb050c55c 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "x1e80100.dtsi" @@ -169,6 +170,23 @@ vreg_edp_3p3: regulator-edp-3p3 { regulator-boot-on; }; + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&misc_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + regulator-always-on; + }; + vreg_nvme: regulator-nvme { compatible = "regulator-fixed"; @@ -692,6 +710,9 @@ touchpad@15 { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; }; @@ -703,6 +724,9 @@ touchpad@2c { hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; }; @@ -714,6 +738,9 @@ keyboard@3a { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&kybd_default>; pinctrl-names = "default"; @@ -896,6 +923,9 @@ touchscreen@10 { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&ts0_default>; pinctrl-names = "default"; }; @@ -1037,6 +1067,19 @@ usb0_3p3_reg_en: usb0-3p3-reg-en-state { }; }; +&pm8550ve_8_gpios { + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + drive-push-pull; + input-disable; + output-enable; + power-source = <1>; /* 1.8 V */ + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; +}; + &pm8550ve_9_gpios { usb0_1p8_reg_en: usb0-1p8-reg-en-state { pins = "gpio8";

4 weeks

1
0
0 0

FAILED: patch "[PATCH] arm64: dts: qcom: x1e78100-t14s: fix missing HID supplies" failed to apply to 6.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.14.y git checkout FETCH_HEAD git cherry-pick -x 55e52d055393f11ba0193975d3db87af36f4b273 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025060244-reconvene-uncork-b34c@gregkh' --subject-prefix 'PATCH 6.14.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 55e52d055393f11ba0193975d3db87af36f4b273 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 14 Mar 2025 15:54:40 +0100 Subject: [PATCH] arm64: dts: qcom: x1e78100-t14s: fix missing HID supplies Add the missing HID supplies to avoid relying on other consumers to keep them on. This also avoids the following warnings on boot: i2c_hid_of 0-0010: supply vdd not found, using dummy regulator i2c_hid_of 0-0010: supply vddl not found, using dummy regulator i2c_hid_of 1-0015: supply vdd not found, using dummy regulator i2c_hid_of 1-002c: supply vdd not found, using dummy regulator i2c_hid_of 1-0015: supply vddl not found, using dummy regulator i2c_hid_of 1-002c: supply vddl not found, using dummy regulator i2c_hid_of 1-003a: supply vdd not found, using dummy regulator i2c_hid_of 1-003a: supply vddl not found, using dummy regulator Note that VCC3B is also used for things like the modem which are not yet described so mark the regulator as always-on for now. Fixes: 7d1cbe2f4985 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6") Cc: stable(a)vger.kernel.org # 6.12 Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-9-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson(a)kernel.org> diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index 160c052db1ec..962fb050c55c 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "x1e80100.dtsi" @@ -169,6 +170,23 @@ vreg_edp_3p3: regulator-edp-3p3 { regulator-boot-on; }; + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&misc_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + regulator-always-on; + }; + vreg_nvme: regulator-nvme { compatible = "regulator-fixed"; @@ -692,6 +710,9 @@ touchpad@15 { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; }; @@ -703,6 +724,9 @@ touchpad@2c { hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; }; @@ -714,6 +738,9 @@ keyboard@3a { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&kybd_default>; pinctrl-names = "default"; @@ -896,6 +923,9 @@ touchscreen@10 { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&ts0_default>; pinctrl-names = "default"; }; @@ -1037,6 +1067,19 @@ usb0_3p3_reg_en: usb0-3p3-reg-en-state { }; }; +&pm8550ve_8_gpios { + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + drive-push-pull; + input-disable; + output-enable; + power-source = <1>; /* 1.8 V */ + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; +}; + &pm8550ve_9_gpios { usb0_1p8_reg_en: usb0-1p8-reg-en-state { pins = "gpio8";

4 weeks

1
0
0 0

FAILED: patch "[PATCH] arm64: dts: qcom: x1e78100-t14s: fix missing HID supplies" failed to apply to 6.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.15.y git checkout FETCH_HEAD git cherry-pick -x 55e52d055393f11ba0193975d3db87af36f4b273 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025060243-cheese-yield-b572@gregkh' --subject-prefix 'PATCH 6.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 55e52d055393f11ba0193975d3db87af36f4b273 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 14 Mar 2025 15:54:40 +0100 Subject: [PATCH] arm64: dts: qcom: x1e78100-t14s: fix missing HID supplies Add the missing HID supplies to avoid relying on other consumers to keep them on. This also avoids the following warnings on boot: i2c_hid_of 0-0010: supply vdd not found, using dummy regulator i2c_hid_of 0-0010: supply vddl not found, using dummy regulator i2c_hid_of 1-0015: supply vdd not found, using dummy regulator i2c_hid_of 1-002c: supply vdd not found, using dummy regulator i2c_hid_of 1-0015: supply vddl not found, using dummy regulator i2c_hid_of 1-002c: supply vddl not found, using dummy regulator i2c_hid_of 1-003a: supply vdd not found, using dummy regulator i2c_hid_of 1-003a: supply vddl not found, using dummy regulator Note that VCC3B is also used for things like the modem which are not yet described so mark the regulator as always-on for now. Fixes: 7d1cbe2f4985 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6") Cc: stable(a)vger.kernel.org # 6.12 Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20250314145440.11371-9-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson(a)kernel.org> diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index 160c052db1ec..962fb050c55c 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "x1e80100.dtsi" @@ -169,6 +170,23 @@ vreg_edp_3p3: regulator-edp-3p3 { regulator-boot-on; }; + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&misc_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + regulator-always-on; + }; + vreg_nvme: regulator-nvme { compatible = "regulator-fixed"; @@ -692,6 +710,9 @@ touchpad@15 { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; }; @@ -703,6 +724,9 @@ touchpad@2c { hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; }; @@ -714,6 +738,9 @@ keyboard@3a { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&kybd_default>; pinctrl-names = "default"; @@ -896,6 +923,9 @@ touchscreen@10 { hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&ts0_default>; pinctrl-names = "default"; }; @@ -1037,6 +1067,19 @@ usb0_3p3_reg_en: usb0-3p3-reg-en-state { }; }; +&pm8550ve_8_gpios { + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + drive-push-pull; + input-disable; + output-enable; + power-source = <1>; /* 1.8 V */ + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; +}; + &pm8550ve_9_gpios { usb0_1p8_reg_en: usb0-1p8-reg-en-state { pins = "gpio8";

4 weeks

1
0
0 0

FAILED: patch "[PATCH] arm64: dts: qcom: x1-crd: Fix vreg_l2j_1p2 voltage" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 5ce920e6a8db40e4b094c0d863cbd19fdcfbbb7a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025060236-resale-proactive-e484@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5ce920e6a8db40e4b094c0d863cbd19fdcfbbb7a Mon Sep 17 00:00:00 2001 From: Stephan Gerhold <stephan.gerhold(a)linaro.org> Date: Wed, 23 Apr 2025 09:30:07 +0200 Subject: [PATCH] arm64: dts: qcom: x1-crd: Fix vreg_l2j_1p2 voltage In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000 uV instead of the 1200000 uV we have currently in the device tree. Use the same for consistency and correctness. Cc: stable(a)vger.kernel.org Fixes: bd50b1f5b6f3 ("arm64: dts: qcom: x1e80100: Add Compute Reference Device") Signed-off-by: Stephan Gerhold <stephan.gerhold(a)linaro.org> Reviewed-by: Johan Hovold <johan+linaro(a)kernel.org> Reviewed-by: Abel Vesa <abel.vesa(a)linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-1-24b6a2043025@l… Signed-off-by: Bjorn Andersson <andersson(a)kernel.org> diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi index f73f053a46a0..dbdf542c7ce5 100644 --- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi @@ -846,8 +846,8 @@ vreg_l1j_0p8: ldo1 { vreg_l2j_1p2: ldo2 { regulator-name = "vreg_l2j_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; };

4 weeks

1
0
0 0

FAILED: patch "[PATCH] arm64: dts: qcom: x1-crd: Fix vreg_l2j_1p2 voltage" failed to apply to 6.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.14.y git checkout FETCH_HEAD git cherry-pick -x 5ce920e6a8db40e4b094c0d863cbd19fdcfbbb7a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025060236-swimming-deodorize-a6f9@gregkh' --subject-prefix 'PATCH 6.14.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5ce920e6a8db40e4b094c0d863cbd19fdcfbbb7a Mon Sep 17 00:00:00 2001 From: Stephan Gerhold <stephan.gerhold(a)linaro.org> Date: Wed, 23 Apr 2025 09:30:07 +0200 Subject: [PATCH] arm64: dts: qcom: x1-crd: Fix vreg_l2j_1p2 voltage In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000 uV instead of the 1200000 uV we have currently in the device tree. Use the same for consistency and correctness. Cc: stable(a)vger.kernel.org Fixes: bd50b1f5b6f3 ("arm64: dts: qcom: x1e80100: Add Compute Reference Device") Signed-off-by: Stephan Gerhold <stephan.gerhold(a)linaro.org> Reviewed-by: Johan Hovold <johan+linaro(a)kernel.org> Reviewed-by: Abel Vesa <abel.vesa(a)linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-1-24b6a2043025@l… Signed-off-by: Bjorn Andersson <andersson(a)kernel.org> diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi index f73f053a46a0..dbdf542c7ce5 100644 --- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi @@ -846,8 +846,8 @@ vreg_l1j_0p8: ldo1 { vreg_l2j_1p2: ldo2 { regulator-name = "vreg_l2j_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; };

4 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2025