June 2025 - Linux-stable-mirror

[PATCH AUTOSEL 6.14 01/19] cifs: Correctly set SMB1 SessionKey field in Session Setup Request

by Sasha Levin

From: Pali Rohár <pali(a)kernel.org> [ Upstream commit 89381c72d52094988e11d23ef24a00066a0fa458 ] [MS-CIFS] specification in section 2.2.4.53.1 where is described SMB_COM_SESSION_SETUP_ANDX Request, for SessionKey field says: The client MUST set this field to be equal to the SessionKey field in the SMB_COM_NEGOTIATE Response for this SMB connection. Linux SMB client currently set this field to zero. This is working fine against Windows NT SMB servers thanks to [MS-CIFS] product behavior <94>: Windows NT Server ignores the client's SessionKey. For compatibility with [MS-CIFS], set this SessionKey field in Session Setup Request to value retrieved from Negotiate response. Signed-off-by: Pali Rohár <pali(a)kernel.org> Signed-off-by: Steve French <stfrench(a)microsoft.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- Based on my comprehensive analysis of both the commit message and code changes, examining the current kernel tree context: **YES** ## Extensive Analysis ### **Nature of the Fix** This is a **specification compliance fix** for SMB1 protocol handling. The commit addresses a clear violation of the MS-CIFS specification section 2.2.4.53.1, which mandates that the SessionKey field in SMB_COM_SESSION_SETUP_ANDX Request must be set to the value from the SMB_COM_NEGOTIATE Response. ### **Code Changes Analysis** **1. Structural Changes (Low Risk)** - **cifsglob.h**: Adds `__le32 session_key_id` to `TCP_Server_Info` structure - minimal ABI impact as this is kernel-internal - **cifspdu.h**: Corrects endianness annotations from `__u32` to `__le32` - pure annotation fix, no behavioral change **2. Functional Changes (Contained and Safe)** - **cifssmb.c**: Captures SessionKey from negotiate response (`server->session_key_id = pSMBr->SessionKey`) - simple field assignment - **sess.c**: Sets SessionKey in session setup request (`pSMB->req.SessionKey = server->session_key_id`) - follows specification requirement ### **Risk Assessment** **Minimal Regression Risk:** - Changes are isolated to SMB1 legacy protocol code - Current behavior (setting SessionKey to zero) works with Windows NT due to MS- CIFS product behavior <94> - New behavior follows specification exactly, improving compatibility with non-Windows SMB1 servers - No security implications - purely a protocol compliance improvement **Code Maturity:** - SMB1 session setup code is very mature and stable - Limited recent changes in this area except compatibility fixes - Well- understood code path with clear specification backing ### **Backport Suitability Criteria Met** **1. Important Bug Fix:** ✅ Fixes protocol specification violation that could cause compatibility issues with strict SMB1 implementations **2. Small and Contained:** ✅ Four minimal changes across related files, all implementing the same specification requirement **3. Clear Side Effects:** ✅ No side effects beyond fixing the specification compliance issue **4. No Architectural Changes:** ✅ Simple field additions and assignments, no structural changes **5. Non- Critical Subsystem:** ✅ Legacy SMB1 protocol code, deprecated since 2017 **6. Minimal Risk:** ✅ Maintains backward compatibility while improving forward compatibility **7. Stable Tree Rules Compliance:** ✅ Important compatibility bugfix with minimal regression risk ### **Comparison to Similar Commits** This commit closely matches the pattern of **Similar Commit #3** and **Similar Commit #5** (both marked YES for backporting): - Protocol compliance improvements - Session setup related fixes - Clear specification backing - Minimal, contained changes - Authored by maintainers (Steve French involvement) ### **Conclusion** This commit represents an ideal stable backport candidate: a clear specification compliance fix with minimal code changes, no security implications, and improvement in interoperability. The fix ensures Linux kernel SMB client properly follows MS-CIFS specification, which is valuable for enterprise environments using diverse SMB1 server implementations. fs/smb/client/cifsglob.h | 1 + fs/smb/client/cifspdu.h | 6 +++--- fs/smb/client/cifssmb.c | 1 + fs/smb/client/sess.c | 1 + 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h index cddeb2adbf4af..caada3bf8b883 100644 --- a/fs/smb/client/cifsglob.h +++ b/fs/smb/client/cifsglob.h @@ -772,6 +772,7 @@ struct TCP_Server_Info { char workstation_RFC1001_name[RFC1001_NAME_LEN_WITH_NULL]; __u32 sequence_number; /* for signing, protected by srv_mutex */ __u32 reconnect_instance; /* incremented on each reconnect */ + __le32 session_key_id; /* retrieved from negotiate response and send in session setup request */ struct session_key session_key; unsigned long lstrp; /* when we got last response from this server */ struct cifs_secmech secmech; /* crypto sec mech functs, descriptors */ diff --git a/fs/smb/client/cifspdu.h b/fs/smb/client/cifspdu.h index cf9ca7e49b8bc..f5afdc5325bfa 100644 --- a/fs/smb/client/cifspdu.h +++ b/fs/smb/client/cifspdu.h @@ -597,7 +597,7 @@ typedef union smb_com_session_setup_andx { __le16 MaxBufferSize; __le16 MaxMpxCount; __le16 VcNumber; - __u32 SessionKey; + __le32 SessionKey; __le16 SecurityBlobLength; __u32 Reserved; __le32 Capabilities; /* see below */ @@ -616,7 +616,7 @@ typedef union smb_com_session_setup_andx { __le16 MaxBufferSize; __le16 MaxMpxCount; __le16 VcNumber; - __u32 SessionKey; + __le32 SessionKey; __le16 CaseInsensitivePasswordLength; /* ASCII password len */ __le16 CaseSensitivePasswordLength; /* Unicode password length*/ __u32 Reserved; /* see below */ @@ -654,7 +654,7 @@ typedef union smb_com_session_setup_andx { __le16 MaxBufferSize; __le16 MaxMpxCount; __le16 VcNumber; - __u32 SessionKey; + __le32 SessionKey; __le16 PasswordLength; __u32 Reserved; /* encrypt key len and offset */ __le16 ByteCount; diff --git a/fs/smb/client/cifssmb.c b/fs/smb/client/cifssmb.c index 4059550859a9b..68722e60fdae1 100644 --- a/fs/smb/client/cifssmb.c +++ b/fs/smb/client/cifssmb.c @@ -495,6 +495,7 @@ CIFSSMBNegotiate(const unsigned int xid, server->max_rw = le32_to_cpu(pSMBr->MaxRawSize); cifs_dbg(NOISY, "Max buf = %d\n", ses->server->maxBuf); server->capabilities = le32_to_cpu(pSMBr->Capabilities); + server->session_key_id = pSMBr->SessionKey; server->timeAdj = (int)(__s16)le16_to_cpu(pSMBr->ServerTimeZone); server->timeAdj *= 60; diff --git a/fs/smb/client/sess.c b/fs/smb/client/sess.c index 9d6b1a4704773..6d6491e035718 100644 --- a/fs/smb/client/sess.c +++ b/fs/smb/client/sess.c @@ -627,6 +627,7 @@ static __u32 cifs_ssetup_hdr(struct cifs_ses *ses, USHRT_MAX)); pSMB->req.MaxMpxCount = cpu_to_le16(server->maxReq); pSMB->req.VcNumber = cpu_to_le16(1); + pSMB->req.SessionKey = server->session_key_id; /* Now no need to set SMBFLG_CASELESS or obsolete CANONICAL PATH */ -- 2.39.5

6 months, 2 weeks

1
18
0 0

[PATCH AUTOSEL 6.15 01/21] cifs: Correctly set SMB1 SessionKey field in Session Setup Request

by Sasha Levin

From: Pali Rohár <pali(a)kernel.org> [ Upstream commit 89381c72d52094988e11d23ef24a00066a0fa458 ] [MS-CIFS] specification in section 2.2.4.53.1 where is described SMB_COM_SESSION_SETUP_ANDX Request, for SessionKey field says: The client MUST set this field to be equal to the SessionKey field in the SMB_COM_NEGOTIATE Response for this SMB connection. Linux SMB client currently set this field to zero. This is working fine against Windows NT SMB servers thanks to [MS-CIFS] product behavior <94>: Windows NT Server ignores the client's SessionKey. For compatibility with [MS-CIFS], set this SessionKey field in Session Setup Request to value retrieved from Negotiate response. Signed-off-by: Pali Rohár <pali(a)kernel.org> Signed-off-by: Steve French <stfrench(a)microsoft.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- Based on my comprehensive analysis of both the commit message and code changes, examining the current kernel tree context: **YES** ## Extensive Analysis ### **Nature of the Fix** This is a **specification compliance fix** for SMB1 protocol handling. The commit addresses a clear violation of the MS-CIFS specification section 2.2.4.53.1, which mandates that the SessionKey field in SMB_COM_SESSION_SETUP_ANDX Request must be set to the value from the SMB_COM_NEGOTIATE Response. ### **Code Changes Analysis** **1. Structural Changes (Low Risk)** - **cifsglob.h**: Adds `__le32 session_key_id` to `TCP_Server_Info` structure - minimal ABI impact as this is kernel-internal - **cifspdu.h**: Corrects endianness annotations from `__u32` to `__le32` - pure annotation fix, no behavioral change **2. Functional Changes (Contained and Safe)** - **cifssmb.c**: Captures SessionKey from negotiate response (`server->session_key_id = pSMBr->SessionKey`) - simple field assignment - **sess.c**: Sets SessionKey in session setup request (`pSMB->req.SessionKey = server->session_key_id`) - follows specification requirement ### **Risk Assessment** **Minimal Regression Risk:** - Changes are isolated to SMB1 legacy protocol code - Current behavior (setting SessionKey to zero) works with Windows NT due to MS- CIFS product behavior <94> - New behavior follows specification exactly, improving compatibility with non-Windows SMB1 servers - No security implications - purely a protocol compliance improvement **Code Maturity:** - SMB1 session setup code is very mature and stable - Limited recent changes in this area except compatibility fixes - Well- understood code path with clear specification backing ### **Backport Suitability Criteria Met** **1. Important Bug Fix:** ✅ Fixes protocol specification violation that could cause compatibility issues with strict SMB1 implementations **2. Small and Contained:** ✅ Four minimal changes across related files, all implementing the same specification requirement **3. Clear Side Effects:** ✅ No side effects beyond fixing the specification compliance issue **4. No Architectural Changes:** ✅ Simple field additions and assignments, no structural changes **5. Non- Critical Subsystem:** ✅ Legacy SMB1 protocol code, deprecated since 2017 **6. Minimal Risk:** ✅ Maintains backward compatibility while improving forward compatibility **7. Stable Tree Rules Compliance:** ✅ Important compatibility bugfix with minimal regression risk ### **Comparison to Similar Commits** This commit closely matches the pattern of **Similar Commit #3** and **Similar Commit #5** (both marked YES for backporting): - Protocol compliance improvements - Session setup related fixes - Clear specification backing - Minimal, contained changes - Authored by maintainers (Steve French involvement) ### **Conclusion** This commit represents an ideal stable backport candidate: a clear specification compliance fix with minimal code changes, no security implications, and improvement in interoperability. The fix ensures Linux kernel SMB client properly follows MS-CIFS specification, which is valuable for enterprise environments using diverse SMB1 server implementations. fs/smb/client/cifsglob.h | 1 + fs/smb/client/cifspdu.h | 6 +++--- fs/smb/client/cifssmb.c | 1 + fs/smb/client/sess.c | 1 + 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h index 3b32116b0b496..4d097b074b5fd 100644 --- a/fs/smb/client/cifsglob.h +++ b/fs/smb/client/cifsglob.h @@ -773,6 +773,7 @@ struct TCP_Server_Info { char workstation_RFC1001_name[RFC1001_NAME_LEN_WITH_NULL]; __u32 sequence_number; /* for signing, protected by srv_mutex */ __u32 reconnect_instance; /* incremented on each reconnect */ + __le32 session_key_id; /* retrieved from negotiate response and send in session setup request */ struct session_key session_key; unsigned long lstrp; /* when we got last response from this server */ struct cifs_secmech secmech; /* crypto sec mech functs, descriptors */ diff --git a/fs/smb/client/cifspdu.h b/fs/smb/client/cifspdu.h index 1b79fe07476f6..d9cf7db0ac35e 100644 --- a/fs/smb/client/cifspdu.h +++ b/fs/smb/client/cifspdu.h @@ -597,7 +597,7 @@ typedef union smb_com_session_setup_andx { __le16 MaxBufferSize; __le16 MaxMpxCount; __le16 VcNumber; - __u32 SessionKey; + __le32 SessionKey; __le16 SecurityBlobLength; __u32 Reserved; __le32 Capabilities; /* see below */ @@ -616,7 +616,7 @@ typedef union smb_com_session_setup_andx { __le16 MaxBufferSize; __le16 MaxMpxCount; __le16 VcNumber; - __u32 SessionKey; + __le32 SessionKey; __le16 CaseInsensitivePasswordLength; /* ASCII password len */ __le16 CaseSensitivePasswordLength; /* Unicode password length*/ __u32 Reserved; /* see below */ @@ -654,7 +654,7 @@ typedef union smb_com_session_setup_andx { __le16 MaxBufferSize; __le16 MaxMpxCount; __le16 VcNumber; - __u32 SessionKey; + __le32 SessionKey; __le16 PasswordLength; __u32 Reserved; /* encrypt key len and offset */ __le16 ByteCount; diff --git a/fs/smb/client/cifssmb.c b/fs/smb/client/cifssmb.c index f55457b4b82e3..f6ec0045c5138 100644 --- a/fs/smb/client/cifssmb.c +++ b/fs/smb/client/cifssmb.c @@ -498,6 +498,7 @@ CIFSSMBNegotiate(const unsigned int xid, server->max_rw = le32_to_cpu(pSMBr->MaxRawSize); cifs_dbg(NOISY, "Max buf = %d\n", ses->server->maxBuf); server->capabilities = le32_to_cpu(pSMBr->Capabilities); + server->session_key_id = pSMBr->SessionKey; server->timeAdj = (int)(__s16)le16_to_cpu(pSMBr->ServerTimeZone); server->timeAdj *= 60; diff --git a/fs/smb/client/sess.c b/fs/smb/client/sess.c index b3fa9ee269127..d53705595a512 100644 --- a/fs/smb/client/sess.c +++ b/fs/smb/client/sess.c @@ -628,6 +628,7 @@ static __u32 cifs_ssetup_hdr(struct cifs_ses *ses, USHRT_MAX)); pSMB->req.MaxMpxCount = cpu_to_le16(server->maxReq); pSMB->req.VcNumber = cpu_to_le16(1); + pSMB->req.SessionKey = server->session_key_id; /* Now no need to set SMBFLG_CASELESS or obsolete CANONICAL PATH */ -- 2.39.5

6 months, 2 weeks

1
20
0 0

[PATCH] hwmon: (ftsteutates) Fix TOCTOU race in fts_read()

by Gui-Dong Han

In the fts_read() function, when handling hwmon_pwm_auto_channels_temp, the code accesses the shared variable data->fan_source[channel] twice without holding any locks. It is first checked against FTS_FAN_SOURCE_INVALID, and if the check passes, it is read again when used as an argument to the BIT() macro. This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition. Another thread executing fts_update_device() can modify the value of data->fan_source[channel] between the check and its use. If the value is changed to FTS_FAN_SOURCE_INVALID (0xff) during this window, the BIT() macro will be called with a large shift value (BIT(255)). A bit shift by a value greater than or equal to the type width is undefined behavior and can lead to a crash or incorrect values being returned to userspace. Fix this by reading data->fan_source[channel] into a local variable once, eliminating the race condition. Additionally, add a bounds check to ensure the value is less than BITS_PER_LONG before passing it to the BIT() macro, making the code more robust against undefined behavior. This possible bug was found by an experimental static analysis tool developed by our team. Fixes: 1c5759d8ce05 ("hwmon: (ftsteutates) Replace fanX_source with pwmX_auto_channels_temp") Cc: stable(a)vger.kernel.org Signed-off-by: Gui-Dong Han <hanguidong02(a)gmail.com> --- drivers/hwmon/ftsteutates.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/ftsteutates.c b/drivers/hwmon/ftsteutates.c index a3a07662e491..8aeec16a7a90 100644 --- a/drivers/hwmon/ftsteutates.c +++ b/drivers/hwmon/ftsteutates.c @@ -423,13 +423,16 @@ static int fts_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, break; case hwmon_pwm: switch (attr) { - case hwmon_pwm_auto_channels_temp: - if (data->fan_source[channel] == FTS_FAN_SOURCE_INVALID) + case hwmon_pwm_auto_channels_temp: { + u8 fan_source = data->fan_source[channel]; + + if (fan_source == FTS_FAN_SOURCE_INVALID || fan_source >= BITS_PER_LONG) *val = 0; else - *val = BIT(data->fan_source[channel]); + *val = BIT(fan_source); return 0; + } default: break; } -- 2.25.1

6 months, 2 weeks

2
1
0 0

[PATCH] platform/loongarch: laptop: Unregister generic_sub_drivers on exit

by Yao Zi

Without correct unregisteration, ACPI notify handlers and the platform driver installed by generic_subdriver_init will become dangling references after removing loongson_laptop module, triggering various kernel faults when a hotkey is sent or at kernel shutdown. Cc: stable(a)vger.kernel.org Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver") Signed-off-by: Yao Zi <ziyao(a)disroot.org> --- drivers/platform/loongarch/loongson-laptop.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/platform/loongarch/loongson-laptop.c b/drivers/platform/loongarch/loongson-laptop.c index 99203584949d..cfe2cf79dbbe 100644 --- a/drivers/platform/loongarch/loongson-laptop.c +++ b/drivers/platform/loongarch/loongson-laptop.c @@ -611,11 +611,17 @@ static int __init generic_acpi_laptop_init(void) static void __exit generic_acpi_laptop_exit(void) { + int i; + if (generic_inputdev) { - if (input_device_registered) + if (input_device_registered) { input_unregister_device(generic_inputdev); - else + + for (i = 0; i < ARRAY_SIZE(generic_sub_drivers); i++) + generic_subdriver_exit(&generic_sub_drivers[i]); + } else { input_free_device(generic_inputdev); + } } } -- 2.49.0

6 months, 2 weeks

2
1
0 0

[PATCH v1] mm: Close theoretical race where stale TLB entries could linger

by Ryan Roberts

Commit 3ea277194daa ("mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries") described a theoretical race as such: """ Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. """ The solution was to introduce flush_tlb_batched_pending() and call it under the PTL from mprotect/madvise/munmap/mremap to complete any pending tlb flushes. However, while madvise_free_pte_range() and madvise_cold_or_pageout_pte_range() were both retro-fitted to call flush_tlb_batched_pending() immediately after initially acquiring the PTL, they both temporarily release the PTL to split a large folio if they stumble upon one. In this case, where re-acquiring the PTL flush_tlb_batched_pending() must be called again, but it previously was not. Let's fix that. There are 2 Fixes: tags here: the first is the commit that fixed madvise_free_pte_range(). The second is the commit that added madvise_cold_or_pageout_pte_range(), which looks like it copy/pasted the faulty pattern from madvise_free_pte_range(). This is a theoretical bug discovered during code review. Cc: stable(a)vger.kernel.org Fixes: 3ea277194daa ("mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries") Fixes: 9c276cc65a58 ("mm: introduce MADV_COLD") Signed-off-by: Ryan Roberts <ryan.roberts(a)arm.com> --- Applies on today's mm-unstable (3f676fe5c7a0). All mm selftests continue to pass. Thanks, Ryan mm/madvise.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/madvise.c b/mm/madvise.c index 5f7a66a1617e..1d44a35ae85c 100644 --- a/mm/madvise.c +++ b/mm/madvise.c @@ -508,6 +508,7 @@ static int madvise_cold_or_pageout_pte_range(pmd_t *pmd, pte_offset_map_lock(mm, pmd, addr, &ptl); if (!start_pte) break; + flush_tlb_batched_pending(mm); arch_enter_lazy_mmu_mode(); if (!err) nr = 0; @@ -741,6 +742,7 @@ static int madvise_free_pte_range(pmd_t *pmd, unsigned long addr, start_pte = pte; if (!start_pte) break; + flush_tlb_batched_pending(mm); arch_enter_lazy_mmu_mode(); if (!err) nr = 0; -- 2.43.0

6 months, 2 weeks

3
2
0 0

[PATCH] drm/xe/bmg: fix compressed VRAM handling

by Matthew Auld

There looks to be an issue in our compression handling when the BO pages are very fragmented, where we choose to skip the identity map and instead fall back to emitting the PTEs by hand when migrating memory, such that we can hopefully do more work per blit operation. However in such a case we need to ensure the src PTEs are correctly tagged with a compression enabled PAT index on dgpu xe2+, otherwise the copy will simply treat the src memory as uncompressed, leading to corruption if the memory was compressed by the user. To fix this it looks like we can pass use_comp_pat into emit_pte() on the src side. There are reports of VRAM corruption in some heavy user workloads, which might be related: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4495 Fixes: 523f191cc0c7 ("drm/xe/xe_migrate: Handle migration logic for xe2+ dgfx") Signed-off-by: Matthew Auld <matthew.auld(a)intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray(a)intel.com> Cc: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> Cc: Akshata Jahagirdar <akshata.jahagirdar(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.12+ --- drivers/gpu/drm/xe/xe_migrate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/xe_migrate.c b/drivers/gpu/drm/xe/xe_migrate.c index 8f8e9fdfb2a8..16788ecf924a 100644 --- a/drivers/gpu/drm/xe/xe_migrate.c +++ b/drivers/gpu/drm/xe/xe_migrate.c @@ -863,7 +863,7 @@ struct dma_fence *xe_migrate_copy(struct xe_migrate *m, if (src_is_vram && xe_migrate_allow_identity(src_L0, &src_it)) xe_res_next(&src_it, src_L0); else - emit_pte(m, bb, src_L0_pt, src_is_vram, copy_system_ccs, + emit_pte(m, bb, src_L0_pt, src_is_vram, copy_system_ccs || use_comp_pat, &src_it, src_L0, src); if (dst_is_vram && xe_migrate_allow_identity(src_L0, &dst_it)) -- 2.49.0

6 months, 2 weeks

2
2
0 0

[PATCH v2 4/4] wifi: ath12k: fix dest ring-buffer corruption when ring is full

by Johan Hovold

Add the missing memory barriers to make sure that destination ring descriptors are read before updating the tail pointer (and passing ownership to the device) to avoid memory corruption on weakly ordered architectures like aarch64 when the ring is full. Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable(a)vger.kernel.org # 6.3 Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/net/wireless/ath/ath12k/hal.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath12k/hal.c b/drivers/net/wireless/ath/ath12k/hal.c index 1e2d13cc2d19..4da354e86a75 100644 --- a/drivers/net/wireless/ath/ath12k/hal.c +++ b/drivers/net/wireless/ath/ath12k/hal.c @@ -2153,7 +2153,6 @@ void ath12k_hal_srng_access_end(struct ath12k_base *ab, struct hal_srng *srng) { lockdep_assert_held(&srng->lock); - /* TODO: See if we need a write memory barrier here */ if (srng->flags & HAL_SRNG_FLAGS_LMAC_RING) { /* For LMAC rings, ring pointer updates are done through FW and * hence written to a shared memory location that is read by FW @@ -2168,7 +2167,11 @@ void ath12k_hal_srng_access_end(struct ath12k_base *ab, struct hal_srng *srng) WRITE_ONCE(*srng->u.src_ring.hp_addr, srng->u.src_ring.hp); } else { srng->u.dst_ring.last_hp = *srng->u.dst_ring.hp_addr; - *srng->u.dst_ring.tp_addr = srng->u.dst_ring.tp; + /* Make sure descriptor is read before updating the + * tail pointer. + */ + dma_mb(); + WRITE_ONCE(*srng->u.dst_ring.tp_addr, srng->u.dst_ring.tp); } } else { if (srng->ring_dir == HAL_SRNG_DIR_SRC) { @@ -2184,6 +2187,10 @@ void ath12k_hal_srng_access_end(struct ath12k_base *ab, struct hal_srng *srng) srng->u.src_ring.hp); } else { srng->u.dst_ring.last_hp = *srng->u.dst_ring.hp_addr; + /* Make sure descriptor is read before updating the + * tail pointer. + */ + mb(); ath12k_hif_write32(ab, (unsigned long)srng->u.dst_ring.tp_addr - (unsigned long)ab->mem, -- 2.49.0

6 months, 2 weeks

3
3
0 0

[PATCH] LoongArch: vDSO: correctly use asm parameters in syscall wrappers

by Thomas Weißschuh

The syscall wrappers use the "a0" register for two different register variables, both the first argument and the return value. The "ret" variable is used as both input and output while the argument register is only used as input. Clang treats the conflicting input parameters as undefined behaviour and optimizes away the argument assignment. The code seems to work by chance for the most part today but that may change in the future. Specifically clock_gettime_fallback() fails with clockids from 16 to 23, as implemented by the upcoming auxiliary clocks. Switch the "ret" register variable to a pure output, similar to the other architectures' vDSO code. This works in both clang and GCC. Link: https://lore.kernel.org/lkml/20250602102825-42aa84f0-23f1-4d10-89fc-e8bbaff… Link: https://lore.kernel.org/lkml/20250519082042.742926976@linutronix.de/ Fixes: c6b99bed6b8f ("LoongArch: Add VDSO and VSYSCALL support") Fixes: 18efd0b10e0f ("LoongArch: vDSO: Wire up getrandom() vDSO implementation") Cc: stable(a)vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- arch/loongarch/include/asm/vdso/getrandom.h | 2 +- arch/loongarch/include/asm/vdso/gettimeofday.h | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/loongarch/include/asm/vdso/getrandom.h b/arch/loongarch/include/asm/vdso/getrandom.h index 48c43f55b039b42168698614d0479b7a872d20f3..a81724b69f291ee49dd1f46b12d6893fc18442b8 100644 --- a/arch/loongarch/include/asm/vdso/getrandom.h +++ b/arch/loongarch/include/asm/vdso/getrandom.h @@ -20,7 +20,7 @@ static __always_inline ssize_t getrandom_syscall(void *_buffer, size_t _len, uns asm volatile( " syscall 0\n" - : "+r" (ret) + : "=r" (ret) : "r" (nr), "r" (buffer), "r" (len), "r" (flags) : "$t0", "$t1", "$t2", "$t3", "$t4", "$t5", "$t6", "$t7", "$t8", "memory"); diff --git a/arch/loongarch/include/asm/vdso/gettimeofday.h b/arch/loongarch/include/asm/vdso/gettimeofday.h index 88cfcf13311630ed5f1a734d23a2bc3f65d79a88..f15503e3336ca1bdc9675ec6e17bbb77abc35ef4 100644 --- a/arch/loongarch/include/asm/vdso/gettimeofday.h +++ b/arch/loongarch/include/asm/vdso/gettimeofday.h @@ -25,7 +25,7 @@ static __always_inline long gettimeofday_fallback( asm volatile( " syscall 0\n" - : "+r" (ret) + : "=r" (ret) : "r" (nr), "r" (tv), "r" (tz) : "$t0", "$t1", "$t2", "$t3", "$t4", "$t5", "$t6", "$t7", "$t8", "memory"); @@ -44,7 +44,7 @@ static __always_inline long clock_gettime_fallback( asm volatile( " syscall 0\n" - : "+r" (ret) + : "=r" (ret) : "r" (nr), "r" (clkid), "r" (ts) : "$t0", "$t1", "$t2", "$t3", "$t4", "$t5", "$t6", "$t7", "$t8", "memory"); @@ -63,7 +63,7 @@ static __always_inline int clock_getres_fallback( asm volatile( " syscall 0\n" - : "+r" (ret) + : "=r" (ret) : "r" (nr), "r" (clkid), "r" (ts) : "$t0", "$t1", "$t2", "$t3", "$t4", "$t5", "$t6", "$t7", "$t8", "memory"); --- base-commit: 546b1c9e93c2bb8cf5ed24e0be1c86bb089b3253 change-id: 20250603-loongarch-vdso-syscall-f585a99bea03 Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

6 months, 2 weeks

6
8
0 0

[PATCH 1/1] dm-verity: fix a memory leak if some arguments are specified multiple times

by Brahmajit Das

From: Mikulas Patocka <mpatocka(a)redhat.com> From: Mikulas Patocka <mpatocka(a)redhat.com> [ Upstream commit 66be40a14e496689e1f0add50118408e22c96169 ] If some of the arguments "check_at_most_once", "ignore_zero_blocks", "use_fec_from_device", "root_hash_sig_key_desc" were specified more than once on the target line, a memory leak would happen. This commit fixes the memory leak. It also fixes error handling in verity_verify_sig_parse_opt_args. Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com> Cc: stable(a)vger.kernel.org Signed-off-by: Brahmajit Das <listout(a)listout.xyz> --- drivers/md/dm-verity-fec.c | 4 ++++ drivers/md/dm-verity-target.c | 8 +++++++- drivers/md/dm-verity-verify-sig.c | 17 +++++++++++++---- 3 files changed, 24 insertions(+), 5 deletions(-) diff --git a/drivers/md/dm-verity-fec.c b/drivers/md/dm-verity-fec.c index 0c41949db784..631a887b487c 100644 --- a/drivers/md/dm-verity-fec.c +++ b/drivers/md/dm-verity-fec.c @@ -593,6 +593,10 @@ int verity_fec_parse_opt_args(struct dm_arg_set *as, struct dm_verity *v, (*argc)--; if (!strcasecmp(arg_name, DM_VERITY_OPT_FEC_DEV)) { + if (v->fec->dev) { + ti->error = "FEC device already specified"; + return -EINVAL; + } r = dm_get_device(ti, arg_value, BLK_OPEN_READ, &v->fec->dev); if (r) { ti->error = "FEC device lookup failed"; diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c index 3c427f18a04b..ed49bcbd224f 100644 --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -1120,6 +1120,9 @@ static int verity_alloc_most_once(struct dm_verity *v) { struct dm_target *ti = v->ti; + if (v->validated_blocks) + return 0; + /* the bitset can only handle INT_MAX blocks */ if (v->data_blocks > INT_MAX) { ti->error = "device too large to use check_at_most_once"; @@ -1143,6 +1146,9 @@ static int verity_alloc_zero_digest(struct dm_verity *v) struct dm_verity_io *io; u8 *zero_data; + if (v->zero_digest) + return 0; + v->zero_digest = kmalloc(v->digest_size, GFP_KERNEL); if (!v->zero_digest) @@ -1577,7 +1583,7 @@ static int verity_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad; } - /* Root hash signature is a optional parameter*/ + /* Root hash signature is an optional parameter */ r = verity_verify_root_hash(root_hash_digest_to_validate, strlen(root_hash_digest_to_validate), verify_args.sig, diff --git a/drivers/md/dm-verity-verify-sig.c b/drivers/md/dm-verity-verify-sig.c index a9e2c6c0a33c..d5261a0e4232 100644 --- a/drivers/md/dm-verity-verify-sig.c +++ b/drivers/md/dm-verity-verify-sig.c @@ -71,9 +71,14 @@ int verity_verify_sig_parse_opt_args(struct dm_arg_set *as, const char *arg_name) { struct dm_target *ti = v->ti; - int ret = 0; + int ret; const char *sig_key = NULL; + if (v->signature_key_desc) { + ti->error = DM_VERITY_VERIFY_ERR("root_hash_sig_key_desc already specified"); + return -EINVAL; + } + if (!*argc) { ti->error = DM_VERITY_VERIFY_ERR("Signature key not specified"); return -EINVAL; @@ -83,14 +88,18 @@ int verity_verify_sig_parse_opt_args(struct dm_arg_set *as, (*argc)--; ret = verity_verify_get_sig_from_key(sig_key, sig_opts); - if (ret < 0) + if (ret < 0) { ti->error = DM_VERITY_VERIFY_ERR("Invalid key specified"); + return ret; + } v->signature_key_desc = kstrdup(sig_key, GFP_KERNEL); - if (!v->signature_key_desc) + if (!v->signature_key_desc) { + ti->error = DM_VERITY_VERIFY_ERR("Could not allocate memory for signature key"); return -ENOMEM; + } - return ret; + return 0; } /* -- 2.49.0

6 months, 2 weeks

2
4
0 0

FAILED: patch "[PATCH] arm64: dts: ti: k3-j721e-sk: Add DT nodes for power" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 97b67cc102dc2cc8aa39a569c22a196e21af5a21 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025060241-numbly-remarry-d1a6@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 97b67cc102dc2cc8aa39a569c22a196e21af5a21 Mon Sep 17 00:00:00 2001 From: Yemike Abhilash Chandra <y-abhilashchandra(a)ti.com> Date: Tue, 15 Apr 2025 16:43:22 +0530 Subject: [PATCH] arm64: dts: ti: k3-j721e-sk: Add DT nodes for power regulators Add device tree nodes for two power regulators on the J721E SK board. vsys_5v0: A fixed regulator representing the 5V supply output from the LM61460 and vdd_sd_dv: A GPIO-controlled TLV71033 regulator. J721E-SK schematics: https://www.ti.com/lit/zip/sprr438 Fixes: 1bfda92a3a36 ("arm64: dts: ti: Add support for J721E SK") Cc: stable(a)vger.kernel.org Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra(a)ti.com> Reviewed-by: Udit Kumar <u-kumar1(a)ti.com> Link: https://lore.kernel.org/r/20250415111328.3847502-2-y-abhilashchandra@ti.com Signed-off-by: Nishanth Menon <nm(a)ti.com> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 440ef57be294..ffef3d1cfd55 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -184,6 +184,17 @@ vsys_3v3: fixedregulator-vsys3v3 { regulator-boot-on; }; + vsys_5v0: fixedregulator-vsys5v0 { + /* Output of LM61460 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vusb_main>; + regulator-always-on; + regulator-boot-on; + }; + vdd_mmc1: fixedregulator-sd { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -211,6 +222,20 @@ vdd_sd_dv_alt: gpio-regulator-tps659411 { <3300000 0x1>; }; + vdd_sd_dv: gpio-regulator-TLV71033 { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-name = "tlv71033"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_5v0>; + gpios = <&main_gpio0 118 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + transceiver1: can-phy1 { compatible = "ti,tcan1042"; #phy-cells = <0>; @@ -613,6 +638,12 @@ J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */ >; }; + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */ + >; + }; + wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */

6 months, 2 weeks

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2025