June 2025 - Linux-stable-mirror

[PATCH] serial: imx: Restore original RXTL for console to fix data loss

by Fabio Estevam

Commit 7a637784d517 ("serial: imx: reduce RX interrupt frequency") introduced a regression on the i.MX6UL EVK board. The issue can be reproduced with the following steps: - Open vi on the board. - Paste a text file (~150 characters). - Save the file, then repeat the process. - Compare the sha256sum of the saved files. The checksums do not match due to missing characters or entire lines. Fix this by restoring the RXTL value to 1 when the UART is used as a console. This ensures timely RX interrupts and reliable data reception in console mode. With this change, pasted content is saved correctly, and checksums are always consistent. Cc: stable(a)vger.kernel.org Fixes: 7a637784d517 ("serial: imx: reduce RX interrupt frequency") Signed-off-by: Fabio Estevam <festevam(a)gmail.com> --- drivers/tty/serial/imx.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index bd02ee898f5d..500dfc009d03 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -235,6 +235,7 @@ struct imx_port { enum imx_tx_state tx_state; struct hrtimer trigger_start_tx; struct hrtimer trigger_stop_tx; + unsigned int rxtl; }; struct imx_port_ucrs { @@ -1339,6 +1340,7 @@ static void imx_uart_clear_rx_errors(struct imx_port *sport) #define TXTL_DEFAULT 8 #define RXTL_DEFAULT 8 /* 8 characters or aging timer */ +#define RXTL_CONSOLE_DEFAULT 1 #define TXTL_DMA 8 /* DMA burst setting */ #define RXTL_DMA 9 /* DMA burst setting */ @@ -1457,7 +1459,7 @@ static void imx_uart_disable_dma(struct imx_port *sport) ucr1 &= ~(UCR1_RXDMAEN | UCR1_TXDMAEN | UCR1_ATDMAEN); imx_uart_writel(sport, ucr1, UCR1); - imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); + imx_uart_setup_ufcr(sport, TXTL_DEFAULT, sport->rxtl); sport->dma_is_enabled = 0; } @@ -1482,7 +1484,12 @@ static int imx_uart_startup(struct uart_port *port) return retval; } - imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); + if (uart_console(&sport->port)) + sport->rxtl = RXTL_CONSOLE_DEFAULT; + else + sport->rxtl = RXTL_DEFAULT; + + imx_uart_setup_ufcr(sport, TXTL_DEFAULT, sport->rxtl); /* disable the DREN bit (Data Ready interrupt enable) before * requesting IRQs @@ -1948,7 +1955,7 @@ static int imx_uart_poll_init(struct uart_port *port) if (retval) clk_disable_unprepare(sport->clk_ipg); - imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); + imx_uart_setup_ufcr(sport, TXTL_DEFAULT, sport->rxtl); uart_port_lock_irqsave(&sport->port, &flags); @@ -2040,7 +2047,7 @@ static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termio /* If the receiver trigger is 0, set it to a default value */ ufcr = imx_uart_readl(sport, UFCR); if ((ufcr & UFCR_RXTL_MASK) == 0) - imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); + imx_uart_setup_ufcr(sport, TXTL_DEFAULT, sport->rxtl); imx_uart_start_rx(port); } @@ -2302,7 +2309,7 @@ imx_uart_console_setup(struct console *co, char *options) else imx_uart_console_get_options(sport, &baud, &parity, &bits); - imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); + imx_uart_setup_ufcr(sport, TXTL_DEFAULT, sport->rxtl); retval = uart_set_options(&sport->port, co, baud, parity, bits, flow); -- 2.34.1

2 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] ext4: ensure i_size is smaller than maxbytes" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 1a77a028a392fab66dd637cdfac3f888450d00af # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062011-unaired-system-c935@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 1a77a028a392fab66dd637cdfac3f888450d00af Mon Sep 17 00:00:00 2001 From: Zhang Yi <yi.zhang(a)huawei.com> Date: Tue, 6 May 2025 09:20:09 +0800 Subject: [PATCH] ext4: ensure i_size is smaller than maxbytes The inode i_size cannot be larger than maxbytes, check it while loading inode from the disk. Signed-off-by: Zhang Yi <yi.zhang(a)huawei.com> Reviewed-by: Jan Kara <jack(a)suse.cz> Reviewed-by: Baokun Li <libaokun1(a)huawei.com> Link: https://patch.msgid.link/20250506012009.3896990-4-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Cc: stable(a)kernel.org diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 01038b4ecee0..ca1f7a0dd8f8 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4966,7 +4966,8 @@ struct inode *__ext4_iget(struct super_block *sb, unsigned long ino, ei->i_file_acl |= ((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32; inode->i_size = ext4_isize(sb, raw_inode); - if ((size = i_size_read(inode)) < 0) { + size = i_size_read(inode); + if (size < 0 || size > ext4_get_maxbytes(inode)) { ext4_error_inode(inode, function, line, 0, "iget: bad i_size value: %lld", size); ret = -EFSCORRUPTED;

2 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] RDMA/iwcm: Fix use-after-free of work objects after cm_id" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 6883b680e703c6b2efddb4e7a8d891ce1803d06b # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062006-jeeringly-portside-e5b6@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 6883b680e703c6b2efddb4e7a8d891ce1803d06b Mon Sep 17 00:00:00 2001 From: Shin'ichiro Kawasaki <shinichiro.kawasaki(a)wdc.com> Date: Sat, 10 May 2025 19:10:36 +0900 Subject: [PATCH] RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction The commit 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") simplified cm_id resource management by freeing cm_id once all references to the cm_id were removed. The references are removed either upon completion of iw_cm event handlers or when the application destroys the cm_id. This commit introduced the use-after-free condition where cm_id_private object could still be in use by event handler works during the destruction of cm_id. The commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs") addressed this use-after- free by flushing all pending works at the cm_id destruction. However, still another use-after-free possibility remained. It happens with the work objects allocated for each cm_id_priv within alloc_work_entries() during cm_id creation, and subsequently freed in dealloc_work_entries() once all references to the cm_id are removed. If the cm_id's last reference is decremented in the event handler work, the work object for the work itself gets removed, and causes the use- after-free BUG below: BUG: KASAN: slab-use-after-free in __pwq_activate_work+0x1ff/0x250 Read of size 8 at addr ffff88811f9cf800 by task kworker/u16:1/147091 CPU: 2 UID: 0 PID: 147091 Comm: kworker/u16:1 Not tainted 6.15.0-rc2+ #27 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Workqueue: 0x0 (iw_cm_wq) Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_report+0x174/0x554 ? __virt_addr_valid+0x208/0x430 ? __pwq_activate_work+0x1ff/0x250 kasan_report+0xae/0x170 ? __pwq_activate_work+0x1ff/0x250 __pwq_activate_work+0x1ff/0x250 pwq_dec_nr_in_flight+0x8c5/0xfb0 process_one_work+0xc11/0x1460 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5ef/0xfd0 ? __pfx_worker_thread+0x10/0x10 kthread+0x3b0/0x770 ? __pfx_kthread+0x10/0x10 ? rcu_is_watching+0x11/0xb0 ? _raw_spin_unlock_irq+0x24/0x50 ? rcu_is_watching+0x11/0xb0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 147416: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 alloc_work_entries+0xa9/0x260 [iw_cm] iw_cm_connect+0x23/0x4a0 [iw_cm] rdma_connect_locked+0xbfd/0x1920 [rdma_cm] nvme_rdma_cm_handler+0x8e5/0x1b60 [nvme_rdma] cma_cm_event_handler+0xae/0x320 [rdma_cm] cma_work_handler+0x106/0x1b0 [rdma_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Freed by task 147091: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kfree+0x13a/0x4b0 dealloc_work_entries+0x125/0x1f0 [iw_cm] iwcm_deref_id+0x6f/0xa0 [iw_cm] cm_work_handler+0x136/0x1ba0 [iw_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x2c/0x50 kasan_record_aux_stack+0xa3/0xb0 __queue_work+0x2ff/0x1390 queue_work_on+0x67/0xc0 cm_event_handler+0x46a/0x820 [iw_cm] siw_cm_upcall+0x330/0x650 [siw] siw_cm_work_handler+0x6b9/0x2b20 [siw] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 This BUG is reproducible by repeating the blktests test case nvme/061 for the rdma transport and the siw driver. To avoid the use-after-free of cm_id_private work objects, ensure that the last reference to the cm_id is decremented not in the event handler works, but in the cm_id destruction context. For that purpose, move iwcm_deref_id() call from destroy_cm_id() to the callers of destroy_cm_id(). In iw_destroy_cm_id(), call iwcm_deref_id() after flushing the pending works. During the fix work, I noticed that iw_destroy_cm_id() is called from cm_work_handler() and process_event() context. However, the comment of iw_destroy_cm_id() notes that the function "cannot be called by the event thread". Drop the false comment. Closes: https://lore.kernel.org/linux-rdma/r5676e754sv35aq7cdsqrlnvyhiq5zktteaurl7v… Fixes: 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") Cc: stable(a)vger.kernel.org Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki(a)wdc.com> Link: https://patch.msgid.link/20250510101036.1756439-1-shinichiro.kawasaki@wdc.c… Reviewed-by: Zhu Yanjun <yanjun.zhu(a)linux.dev> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c index f4486cbd8f45..62410578dec3 100644 --- a/drivers/infiniband/core/iwcm.c +++ b/drivers/infiniband/core/iwcm.c @@ -368,12 +368,9 @@ EXPORT_SYMBOL(iw_cm_disconnect); /* * CM_ID <-- DESTROYING * - * Clean up all resources associated with the connection and release - * the initial reference taken by iw_create_cm_id. - * - * Returns true if and only if the last cm_id_priv reference has been dropped. + * Clean up all resources associated with the connection. */ -static bool destroy_cm_id(struct iw_cm_id *cm_id) +static void destroy_cm_id(struct iw_cm_id *cm_id) { struct iwcm_id_private *cm_id_priv; struct ib_qp *qp; @@ -442,20 +439,22 @@ static bool destroy_cm_id(struct iw_cm_id *cm_id) iwpm_remove_mapinfo(&cm_id->local_addr, &cm_id->m_local_addr); iwpm_remove_mapping(&cm_id->local_addr, RDMA_NL_IWCM); } - - return iwcm_deref_id(cm_id_priv); } /* - * This function is only called by the application thread and cannot - * be called by the event thread. The function will wait for all - * references to be released on the cm_id and then kfree the cm_id - * object. + * Destroy cm_id. If the cm_id still has other references, wait for all + * references to be released on the cm_id and then release the initial + * reference taken by iw_create_cm_id. */ void iw_destroy_cm_id(struct iw_cm_id *cm_id) { - if (!destroy_cm_id(cm_id)) + struct iwcm_id_private *cm_id_priv; + + cm_id_priv = container_of(cm_id, struct iwcm_id_private, id); + destroy_cm_id(cm_id); + if (refcount_read(&cm_id_priv->refcount) > 1) flush_workqueue(iwcm_wq); + iwcm_deref_id(cm_id_priv); } EXPORT_SYMBOL(iw_destroy_cm_id); @@ -1035,8 +1034,10 @@ static void cm_work_handler(struct work_struct *_work) if (!test_bit(IWCM_F_DROP_EVENTS, &cm_id_priv->flags)) { ret = process_event(cm_id_priv, &levent); - if (ret) - WARN_ON_ONCE(destroy_cm_id(&cm_id_priv->id)); + if (ret) { + destroy_cm_id(&cm_id_priv->id); + WARN_ON_ONCE(iwcm_deref_id(cm_id_priv)); + } } else pr_debug("dropping event %d\n", levent.event); if (iwcm_deref_id(cm_id_priv))

2 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] RDMA/iwcm: Fix use-after-free of work objects after cm_id" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 6883b680e703c6b2efddb4e7a8d891ce1803d06b # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062004-henchman-staging-7b05@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 6883b680e703c6b2efddb4e7a8d891ce1803d06b Mon Sep 17 00:00:00 2001 From: Shin'ichiro Kawasaki <shinichiro.kawasaki(a)wdc.com> Date: Sat, 10 May 2025 19:10:36 +0900 Subject: [PATCH] RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction The commit 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") simplified cm_id resource management by freeing cm_id once all references to the cm_id were removed. The references are removed either upon completion of iw_cm event handlers or when the application destroys the cm_id. This commit introduced the use-after-free condition where cm_id_private object could still be in use by event handler works during the destruction of cm_id. The commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs") addressed this use-after- free by flushing all pending works at the cm_id destruction. However, still another use-after-free possibility remained. It happens with the work objects allocated for each cm_id_priv within alloc_work_entries() during cm_id creation, and subsequently freed in dealloc_work_entries() once all references to the cm_id are removed. If the cm_id's last reference is decremented in the event handler work, the work object for the work itself gets removed, and causes the use- after-free BUG below: BUG: KASAN: slab-use-after-free in __pwq_activate_work+0x1ff/0x250 Read of size 8 at addr ffff88811f9cf800 by task kworker/u16:1/147091 CPU: 2 UID: 0 PID: 147091 Comm: kworker/u16:1 Not tainted 6.15.0-rc2+ #27 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Workqueue: 0x0 (iw_cm_wq) Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_report+0x174/0x554 ? __virt_addr_valid+0x208/0x430 ? __pwq_activate_work+0x1ff/0x250 kasan_report+0xae/0x170 ? __pwq_activate_work+0x1ff/0x250 __pwq_activate_work+0x1ff/0x250 pwq_dec_nr_in_flight+0x8c5/0xfb0 process_one_work+0xc11/0x1460 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5ef/0xfd0 ? __pfx_worker_thread+0x10/0x10 kthread+0x3b0/0x770 ? __pfx_kthread+0x10/0x10 ? rcu_is_watching+0x11/0xb0 ? _raw_spin_unlock_irq+0x24/0x50 ? rcu_is_watching+0x11/0xb0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 147416: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 alloc_work_entries+0xa9/0x260 [iw_cm] iw_cm_connect+0x23/0x4a0 [iw_cm] rdma_connect_locked+0xbfd/0x1920 [rdma_cm] nvme_rdma_cm_handler+0x8e5/0x1b60 [nvme_rdma] cma_cm_event_handler+0xae/0x320 [rdma_cm] cma_work_handler+0x106/0x1b0 [rdma_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Freed by task 147091: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kfree+0x13a/0x4b0 dealloc_work_entries+0x125/0x1f0 [iw_cm] iwcm_deref_id+0x6f/0xa0 [iw_cm] cm_work_handler+0x136/0x1ba0 [iw_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x2c/0x50 kasan_record_aux_stack+0xa3/0xb0 __queue_work+0x2ff/0x1390 queue_work_on+0x67/0xc0 cm_event_handler+0x46a/0x820 [iw_cm] siw_cm_upcall+0x330/0x650 [siw] siw_cm_work_handler+0x6b9/0x2b20 [siw] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 This BUG is reproducible by repeating the blktests test case nvme/061 for the rdma transport and the siw driver. To avoid the use-after-free of cm_id_private work objects, ensure that the last reference to the cm_id is decremented not in the event handler works, but in the cm_id destruction context. For that purpose, move iwcm_deref_id() call from destroy_cm_id() to the callers of destroy_cm_id(). In iw_destroy_cm_id(), call iwcm_deref_id() after flushing the pending works. During the fix work, I noticed that iw_destroy_cm_id() is called from cm_work_handler() and process_event() context. However, the comment of iw_destroy_cm_id() notes that the function "cannot be called by the event thread". Drop the false comment. Closes: https://lore.kernel.org/linux-rdma/r5676e754sv35aq7cdsqrlnvyhiq5zktteaurl7v… Fixes: 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") Cc: stable(a)vger.kernel.org Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki(a)wdc.com> Link: https://patch.msgid.link/20250510101036.1756439-1-shinichiro.kawasaki@wdc.c… Reviewed-by: Zhu Yanjun <yanjun.zhu(a)linux.dev> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c index f4486cbd8f45..62410578dec3 100644 --- a/drivers/infiniband/core/iwcm.c +++ b/drivers/infiniband/core/iwcm.c @@ -368,12 +368,9 @@ EXPORT_SYMBOL(iw_cm_disconnect); /* * CM_ID <-- DESTROYING * - * Clean up all resources associated with the connection and release - * the initial reference taken by iw_create_cm_id. - * - * Returns true if and only if the last cm_id_priv reference has been dropped. + * Clean up all resources associated with the connection. */ -static bool destroy_cm_id(struct iw_cm_id *cm_id) +static void destroy_cm_id(struct iw_cm_id *cm_id) { struct iwcm_id_private *cm_id_priv; struct ib_qp *qp; @@ -442,20 +439,22 @@ static bool destroy_cm_id(struct iw_cm_id *cm_id) iwpm_remove_mapinfo(&cm_id->local_addr, &cm_id->m_local_addr); iwpm_remove_mapping(&cm_id->local_addr, RDMA_NL_IWCM); } - - return iwcm_deref_id(cm_id_priv); } /* - * This function is only called by the application thread and cannot - * be called by the event thread. The function will wait for all - * references to be released on the cm_id and then kfree the cm_id - * object. + * Destroy cm_id. If the cm_id still has other references, wait for all + * references to be released on the cm_id and then release the initial + * reference taken by iw_create_cm_id. */ void iw_destroy_cm_id(struct iw_cm_id *cm_id) { - if (!destroy_cm_id(cm_id)) + struct iwcm_id_private *cm_id_priv; + + cm_id_priv = container_of(cm_id, struct iwcm_id_private, id); + destroy_cm_id(cm_id); + if (refcount_read(&cm_id_priv->refcount) > 1) flush_workqueue(iwcm_wq); + iwcm_deref_id(cm_id_priv); } EXPORT_SYMBOL(iw_destroy_cm_id); @@ -1035,8 +1034,10 @@ static void cm_work_handler(struct work_struct *_work) if (!test_bit(IWCM_F_DROP_EVENTS, &cm_id_priv->flags)) { ret = process_event(cm_id_priv, &levent); - if (ret) - WARN_ON_ONCE(destroy_cm_id(&cm_id_priv->id)); + if (ret) { + destroy_cm_id(&cm_id_priv->id); + WARN_ON_ONCE(iwcm_deref_id(cm_id_priv)); + } } else pr_debug("dropping event %d\n", levent.event); if (iwcm_deref_id(cm_id_priv))

2 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] Input: gpio-keys - fix possible concurrent access in" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 8f38219fa139623c29db2cb0f17d0a197a86e344 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062003-wizard-hamstring-172d@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 8f38219fa139623c29db2cb0f17d0a197a86e344 Mon Sep 17 00:00:00 2001 From: Gatien Chevallier <gatien.chevallier(a)foss.st.com> Date: Fri, 30 May 2025 16:09:23 -0700 Subject: [PATCH] Input: gpio-keys - fix possible concurrent access in gpio_keys_irq_timer() gpio_keys_irq_isr() and gpio_keys_irq_timer() access the same resources. There could be a concurrent access if a GPIO interrupt occurs in parallel of a HR timer interrupt. Guard back those resources with a spinlock. Fixes: 019002f20cb5 ("Input: gpio-keys - use hrtimer for release timer") Signed-off-by: Gatien Chevallier <gatien.chevallier(a)foss.st.com> Link: https://lore.kernel.org/r/20250528-gpio_keys_preempt_rt-v2-2-3fc55a9c3619@f… Cc: stable(a)vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index d884538107c9..f9db86da0818 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -449,6 +449,8 @@ static enum hrtimer_restart gpio_keys_irq_timer(struct hrtimer *t) release_timer); struct input_dev *input = bdata->input; + guard(spinlock_irqsave)(&bdata->lock); + if (bdata->key_pressed) { input_report_key(input, *bdata->code, 0); input_sync(input);

2 months, 1 week

1
0
0 0

[PATCH net 1/2] net: txgbe: request MISC IRQ in ndo_open

by Jiawen Wu

Move the creating of irq_domain for MISC IRQ from .probe to .ndo_open, and free it in .ndo_stop, to maintain consistency with the queue IRQs. This it for subsequent adjustments to the IRQ vectors. Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller") Cc: stable(a)vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu(a)trustnetic.com> --- .../net/ethernet/wangxun/txgbe/txgbe_main.c | 21 ++++++++----------- 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c index f3d2778b8e35..b4a864c97db3 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c @@ -458,10 +458,14 @@ static int txgbe_open(struct net_device *netdev) wx_configure(wx); - err = txgbe_request_queue_irqs(wx); + err = txgbe_setup_misc_irq(wx->priv); if (err) goto err_free_resources; + err = txgbe_request_queue_irqs(wx); + if (err) + goto err_free_misc_irq; + /* Notify the stack of the actual queue counts. */ err = netif_set_real_num_tx_queues(netdev, wx->num_tx_queues); if (err) @@ -479,6 +483,8 @@ static int txgbe_open(struct net_device *netdev) err_free_irq: wx_free_irq(wx); +err_free_misc_irq: + txgbe_free_misc_irq(wx->priv); err_free_resources: wx_free_resources(wx); err_reset: @@ -519,6 +525,7 @@ static int txgbe_close(struct net_device *netdev) wx_ptp_stop(wx); txgbe_down(wx); wx_free_irq(wx); + txgbe_free_misc_irq(wx->priv); wx_free_resources(wx); txgbe_fdir_filter_exit(wx); wx_control_hw(wx, false); @@ -564,7 +571,6 @@ static void txgbe_shutdown(struct pci_dev *pdev) int txgbe_setup_tc(struct net_device *dev, u8 tc) { struct wx *wx = netdev_priv(dev); - struct txgbe *txgbe = wx->priv; /* Hardware has to reinitialize queues and interrupts to * match packet buffer alignment. Unfortunately, the @@ -575,7 +581,6 @@ int txgbe_setup_tc(struct net_device *dev, u8 tc) else txgbe_reset(wx); - txgbe_free_misc_irq(txgbe); wx_clear_interrupt_scheme(wx); if (tc) @@ -584,7 +589,6 @@ int txgbe_setup_tc(struct net_device *dev, u8 tc) netdev_reset_tc(dev); wx_init_interrupt_scheme(wx); - txgbe_setup_misc_irq(txgbe); if (netif_running(dev)) txgbe_open(dev); @@ -882,13 +886,9 @@ static int txgbe_probe(struct pci_dev *pdev, txgbe_init_fdir(txgbe); - err = txgbe_setup_misc_irq(txgbe); - if (err) - goto err_release_hw; - err = txgbe_init_phy(txgbe); if (err) - goto err_free_misc_irq; + goto err_release_hw; err = register_netdev(netdev); if (err) @@ -916,8 +916,6 @@ static int txgbe_probe(struct pci_dev *pdev, err_remove_phy: txgbe_remove_phy(txgbe); -err_free_misc_irq: - txgbe_free_misc_irq(txgbe); err_release_hw: wx_clear_interrupt_scheme(wx); wx_control_hw(wx, false); @@ -957,7 +955,6 @@ static void txgbe_remove(struct pci_dev *pdev) unregister_netdev(netdev); txgbe_remove_phy(txgbe); - txgbe_free_misc_irq(txgbe); wx_free_isb_resources(wx); pci_release_selected_regions(pdev, -- 2.48.1

2 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] iommu: Allow attaching static domains in" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 6f7340120a0aa8b2eb29c826a4434e8b5c4e11d3 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062051-rage-declared-354d@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 6f7340120a0aa8b2eb29c826a4434e8b5c4e11d3 Mon Sep 17 00:00:00 2001 From: Lu Baolu <baolu.lu(a)linux.intel.com> Date: Thu, 24 Apr 2025 11:41:23 +0800 Subject: [PATCH] iommu: Allow attaching static domains in iommu_attach_device_pasid() The idxd driver attaches the default domain to a PASID of the device to perform kernel DMA using that PASID. The domain is attached to the device's PASID through iommu_attach_device_pasid(), which checks if the domain->owner matches the iommu_ops retrieved from the device. If they do not match, it returns a failure. if (ops != domain->owner || pasid == IOMMU_NO_PASID) return -EINVAL; The static identity domain implemented by the intel iommu driver doesn't specify the domain owner. Therefore, kernel DMA with PASID doesn't work for the idxd driver if the device translation mode is set to passthrough. Generally the owner field of static domains are not set because they are already part of iommu ops. Add a helper domain_iommu_ops_compatible() that checks if a domain is compatible with the device's iommu ops. This helper explicitly allows the static blocked and identity domains associated with the device's iommu_ops to be considered compatible. Fixes: 2031c469f816 ("iommu/vt-d: Add support for static identity domain") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220031 Cc: stable(a)vger.kernel.org Suggested-by: Jason Gunthorpe <jgg(a)nvidia.com> Link: https://lore.kernel.org/linux-iommu/20250422191554.GC1213339@ziepe.ca/ Signed-off-by: Lu Baolu <baolu.lu(a)linux.intel.com> Reviewed-by: Dave Jiang <dave.jiang(a)intel.com> Reviewed-by: Robin Murphy <robin.murphy(a)arm.com> Reviewed-by: Jason Gunthorpe <jgg(a)nvidia.com> Reviewed-by: Vasant Hegde <vasant.hegde(a)amd.com> Reviewed-by: Kevin Tian <kevin.tian(a)intel.com> Link: https://lore.kernel.org/r/20250424034123.2311362-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel(a)suse.de> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index 3e4a9fe867f5..f257ca30ed48 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -2206,6 +2206,19 @@ static void *iommu_make_pasid_array_entry(struct iommu_domain *domain, return xa_tag_pointer(domain, IOMMU_PASID_ARRAY_DOMAIN); } +static bool domain_iommu_ops_compatible(const struct iommu_ops *ops, + struct iommu_domain *domain) +{ + if (domain->owner == ops) + return true; + + /* For static domains, owner isn't set. */ + if (domain == ops->blocked_domain || domain == ops->identity_domain) + return true; + + return false; +} + static int __iommu_attach_group(struct iommu_domain *domain, struct iommu_group *group) { @@ -2216,7 +2229,8 @@ static int __iommu_attach_group(struct iommu_domain *domain, return -EBUSY; dev = iommu_group_first_dev(group); - if (!dev_has_iommu(dev) || dev_iommu_ops(dev) != domain->owner) + if (!dev_has_iommu(dev) || + !domain_iommu_ops_compatible(dev_iommu_ops(dev), domain)) return -EINVAL; return __iommu_group_set_domain(group, domain); @@ -3405,7 +3419,8 @@ int iommu_attach_device_pasid(struct iommu_domain *domain, !ops->blocked_domain->ops->set_dev_pasid) return -EOPNOTSUPP; - if (ops != domain->owner || pasid == IOMMU_NO_PASID) + if (!domain_iommu_ops_compatible(ops, domain) || + pasid == IOMMU_NO_PASID) return -EINVAL; mutex_lock(&group->mutex); @@ -3481,7 +3496,7 @@ int iommu_replace_device_pasid(struct iommu_domain *domain, if (!domain->ops->set_dev_pasid) return -EOPNOTSUPP; - if (dev_iommu_ops(dev) != domain->owner || + if (!domain_iommu_ops_compatible(dev_iommu_ops(dev), domain) || pasid == IOMMU_NO_PASID || !handle) return -EINVAL;

2 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] soc: qcom: pmic_glink_altmode: fix spurious DP hotplug events" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 5090ac9191a19c61beeade60d3d839e509fab640 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062054-daybreak-aspirin-4458@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5090ac9191a19c61beeade60d3d839e509fab640 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Mon, 24 Mar 2025 14:24:48 +0100 Subject: [PATCH] soc: qcom: pmic_glink_altmode: fix spurious DP hotplug events The PMIC GLINK driver is currently generating DisplayPort hotplug notifications whenever something is connected to (or disconnected from) a port regardless of the type of notification sent by the firmware. These notifications are forwarded to user space by the DRM subsystem as connector "change" uevents: KERNEL[1556.223776] change /devices/platform/soc(a)0/ae00000.display-subsystem/ae01000.display-controller/drm/card0 (drm) ACTION=change DEVPATH=/devices/platform/soc(a)0/ae00000.display-subsystem/ae01000.display-controller/drm/card0 SUBSYSTEM=drm HOTPLUG=1 CONNECTOR=36 DEVNAME=/dev/dri/card0 DEVTYPE=drm_minor SEQNUM=4176 MAJOR=226 MINOR=0 On the Lenovo ThinkPad X13s and T14s, the PMIC GLINK firmware sends two identical notifications with orientation information when connecting a charger, each generating a bogus DRM hotplug event. On the X13s, two such notification are also sent every 90 seconds while a charger remains connected, which again are forwarded to user space: port = 1, svid = ff00, mode = 255, hpd_state = 0 payload = 01 00 00 00 00 00 00 ff 00 00 00 00 00 00 00 00 Note that the firmware only sends on of these when connecting an ethernet adapter. Fix the spurious hotplug events by only forwarding hotplug notifications for the Type-C DisplayPort service id. This also reduces the number of uevents from four to two when an actual DisplayPort altmode device is connected: port = 0, svid = ff01, mode = 2, hpd_state = 0 payload = 00 01 02 00 f2 0c 01 ff 03 00 00 00 00 00 00 00 port = 0, svid = ff01, mode = 2, hpd_state = 1 payload = 00 01 02 00 f2 0c 01 ff 43 00 00 00 00 00 00 00 Fixes: 080b4e24852b ("soc: qcom: pmic_glink: Introduce altmode support") Cc: stable(a)vger.kernel.org # 6.3 Cc: Bjorn Andersson <andersson(a)kernel.org> Reported-by: Clayton Craft <clayton(a)craftyguy.net> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Acked-by: Konrad Dybcio <konrad.dybcio(a)oss.qualcomm.com> Tested-by: Clayton Craft <clayton(a)craftyguy.net> Link: https://lore.kernel.org/r/20250324132448.6134-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson(a)kernel.org> diff --git a/drivers/soc/qcom/pmic_glink_altmode.c b/drivers/soc/qcom/pmic_glink_altmode.c index bd06ce161804..7f11acd33323 100644 --- a/drivers/soc/qcom/pmic_glink_altmode.c +++ b/drivers/soc/qcom/pmic_glink_altmode.c @@ -218,21 +218,29 @@ static void pmic_glink_altmode_worker(struct work_struct *work) { struct pmic_glink_altmode_port *alt_port = work_to_altmode_port(work); struct pmic_glink_altmode *altmode = alt_port->altmode; + enum drm_connector_status conn_status; typec_switch_set(alt_port->typec_switch, alt_port->orientation); - if (alt_port->svid == USB_TYPEC_DP_SID && alt_port->mode == 0xff) - pmic_glink_altmode_safe(altmode, alt_port); - else if (alt_port->svid == USB_TYPEC_DP_SID) - pmic_glink_altmode_enable_dp(altmode, alt_port, alt_port->mode, - alt_port->hpd_state, alt_port->hpd_irq); - else - pmic_glink_altmode_enable_usb(altmode, alt_port); + if (alt_port->svid == USB_TYPEC_DP_SID) { + if (alt_port->mode == 0xff) { + pmic_glink_altmode_safe(altmode, alt_port); + } else { + pmic_glink_altmode_enable_dp(altmode, alt_port, + alt_port->mode, + alt_port->hpd_state, + alt_port->hpd_irq); + } - drm_aux_hpd_bridge_notify(&alt_port->bridge->dev, - alt_port->hpd_state ? - connector_status_connected : - connector_status_disconnected); + if (alt_port->hpd_state) + conn_status = connector_status_connected; + else + conn_status = connector_status_disconnected; + + drm_aux_hpd_bridge_notify(&alt_port->bridge->dev, conn_status); + } else { + pmic_glink_altmode_enable_usb(altmode, alt_port); + } pmic_glink_altmode_request(altmode, ALTMODE_PAN_ACK, alt_port->index); }

2 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] fbdev: Fix do_register_framebuffer to prevent null-ptr-deref" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 17186f1f90d34fa701e4f14e6818305151637b9e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062004-unwed-cure-9269@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 17186f1f90d34fa701e4f14e6818305151637b9e Mon Sep 17 00:00:00 2001 From: Murad Masimov <m.masimov(a)mt-integration.ru> Date: Mon, 28 Apr 2025 18:34:06 +0300 Subject: [PATCH] fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in do_register_framebuffer() fails to allocate memory for fb_videomode, it will later lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ Even though fbcon_init() checks beforehand if fb_match_mode() in var_to_display() fails, it can not prevent the panic because fbcon_init() does not return error code. Considering this and the comment in the code about fb_match_mode() returning NULL - "This should not happen" - it is better to prevent registering the fb_info if its mode was not set successfully. Also move fb_add_videomode() closer to the beginning of do_register_framebuffer() to avoid having to do the cleanup on fail. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable(a)vger.kernel.org Signed-off-by: Murad Masimov <m.masimov(a)mt-integration.ru> Signed-off-by: Helge Deller <deller(a)gmx.de> diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c index 3c568cff2913..e1557d80768f 100644 --- a/drivers/video/fbdev/core/fbmem.c +++ b/drivers/video/fbdev/core/fbmem.c @@ -388,7 +388,7 @@ static int fb_check_foreignness(struct fb_info *fi) static int do_register_framebuffer(struct fb_info *fb_info) { - int i; + int i, err = 0; struct fb_videomode mode; if (fb_check_foreignness(fb_info)) @@ -397,10 +397,18 @@ static int do_register_framebuffer(struct fb_info *fb_info) if (num_registered_fb == FB_MAX) return -ENXIO; - num_registered_fb++; for (i = 0 ; i < FB_MAX; i++) if (!registered_fb[i]) break; + + if (!fb_info->modelist.prev || !fb_info->modelist.next) + INIT_LIST_HEAD(&fb_info->modelist); + + fb_var_to_videomode(&mode, &fb_info->var); + err = fb_add_videomode(&mode, &fb_info->modelist); + if (err < 0) + return err; + fb_info->node = i; refcount_set(&fb_info->count, 1); mutex_init(&fb_info->lock); @@ -426,16 +434,12 @@ static int do_register_framebuffer(struct fb_info *fb_info) if (bitmap_empty(fb_info->pixmap.blit_y, FB_MAX_BLIT_HEIGHT)) bitmap_fill(fb_info->pixmap.blit_y, FB_MAX_BLIT_HEIGHT); - if (!fb_info->modelist.prev || !fb_info->modelist.next) - INIT_LIST_HEAD(&fb_info->modelist); - if (fb_info->skip_vt_switch) pm_vt_switch_required(fb_info->device, false); else pm_vt_switch_required(fb_info->device, true); - fb_var_to_videomode(&mode, &fb_info->var); - fb_add_videomode(&mode, &fb_info->modelist); + num_registered_fb++; registered_fb[i] = fb_info; #ifdef CONFIG_GUMSTIX_AM200EPD

2 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] fbdev: Fix do_register_framebuffer to prevent null-ptr-deref" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 17186f1f90d34fa701e4f14e6818305151637b9e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062003-shortness-almighty-153b@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 17186f1f90d34fa701e4f14e6818305151637b9e Mon Sep 17 00:00:00 2001 From: Murad Masimov <m.masimov(a)mt-integration.ru> Date: Mon, 28 Apr 2025 18:34:06 +0300 Subject: [PATCH] fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in do_register_framebuffer() fails to allocate memory for fb_videomode, it will later lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ Even though fbcon_init() checks beforehand if fb_match_mode() in var_to_display() fails, it can not prevent the panic because fbcon_init() does not return error code. Considering this and the comment in the code about fb_match_mode() returning NULL - "This should not happen" - it is better to prevent registering the fb_info if its mode was not set successfully. Also move fb_add_videomode() closer to the beginning of do_register_framebuffer() to avoid having to do the cleanup on fail. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable(a)vger.kernel.org Signed-off-by: Murad Masimov <m.masimov(a)mt-integration.ru> Signed-off-by: Helge Deller <deller(a)gmx.de> diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c index 3c568cff2913..e1557d80768f 100644 --- a/drivers/video/fbdev/core/fbmem.c +++ b/drivers/video/fbdev/core/fbmem.c @@ -388,7 +388,7 @@ static int fb_check_foreignness(struct fb_info *fi) static int do_register_framebuffer(struct fb_info *fb_info) { - int i; + int i, err = 0; struct fb_videomode mode; if (fb_check_foreignness(fb_info)) @@ -397,10 +397,18 @@ static int do_register_framebuffer(struct fb_info *fb_info) if (num_registered_fb == FB_MAX) return -ENXIO; - num_registered_fb++; for (i = 0 ; i < FB_MAX; i++) if (!registered_fb[i]) break; + + if (!fb_info->modelist.prev || !fb_info->modelist.next) + INIT_LIST_HEAD(&fb_info->modelist); + + fb_var_to_videomode(&mode, &fb_info->var); + err = fb_add_videomode(&mode, &fb_info->modelist); + if (err < 0) + return err; + fb_info->node = i; refcount_set(&fb_info->count, 1); mutex_init(&fb_info->lock); @@ -426,16 +434,12 @@ static int do_register_framebuffer(struct fb_info *fb_info) if (bitmap_empty(fb_info->pixmap.blit_y, FB_MAX_BLIT_HEIGHT)) bitmap_fill(fb_info->pixmap.blit_y, FB_MAX_BLIT_HEIGHT); - if (!fb_info->modelist.prev || !fb_info->modelist.next) - INIT_LIST_HEAD(&fb_info->modelist); - if (fb_info->skip_vt_switch) pm_vt_switch_required(fb_info->device, false); else pm_vt_switch_required(fb_info->device, true); - fb_var_to_videomode(&mode, &fb_info->var); - fb_add_videomode(&mode, &fb_info->modelist); + num_registered_fb++; registered_fb[i] = fb_info; #ifdef CONFIG_GUMSTIX_AM200EPD

2 months, 1 week

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2025