Lkft-triage

lkft-triage@lists.linaro.org

29 participants
34105 discussions

by Sasha Levin

This is the start of the stable review cycle for the 6.6.128 release. There are 283 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Mon Mar 2 06:06:54 PM UTC 2026. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/… or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y and the diffstat can be found below. Thanks, Sasha ------------- Pseudo-Shortlog of commits: Abhishek Bapat (1): quota: fix livelock between quotactl and freeze_super Aboorva Devarajan (1): cpuidle: Skip governor when only one idle state is available Adrian Hunter (1): i3c: master: Update hot-join flag only on success Aleksei Oladko (2): selftests: forwarding: vxlan_bridge_1d: fix test failure with br_netfilter enabled selftests: forwarding: vxlan_bridge_1d_ipv6: fix test failure with br_netfilter enabled Alex Elder (1): mfd: simple-mfd-i2c: Add SpacemiT P1 support Alexander Koskovich (1): power: reset: nvmem-reboot-mode: respect cell size for nvmem_cell_write Alexander Stein (1): arm64: dts: tqma8mpql-mba8mpxl: Fix HDMI CEC pad control settings Alexey Simakov (1): ACPICA: Fix NULL pointer dereference in acpi_ev_address_space_dispatch() Allison Henderson (1): net/rds: rds_sendmsg should not discard payload_len Alok Tiwari (1): mtd: rawnand: cadence: Fix return type of CDMA send-and-wait helper Alper Ak (2): tpm: tpm_i2c_infineon: Fix locality leak on get_burstcount() failure tpm: st33zp24: Fix missing cleanup on get_burstcount() error Anders Grahn (1): netfilter: nft_counter: fix reset of counters on 32bit archs Andreas Gruenbacher (2): gfs2: Retries missing in gfs2_{rename,exchange} gfs2: Add metapath_dibh helper André Draszik (1): regulator: core: move supply check earlier in set_machine_constraints() Andy Shevchenko (1): platform/chrome: cros_typec_switch: Don't touch struct fwnode_handle::dev AngeloGioacchino Del Regno (1): dmaengine: mediatek: uart-apdma: Fix above 4G addressing TX/RX Anshumali Gaur (1): octeontx2-af: Fix PF driver crash with kexec kernel booting Anthony Iliopoulos (1): nfsd: never defer requests during idmap lookup Antonio Borneo (1): coresight: etm3x: Fix cpulocked warning on cpuhp Aristeu Rozanski (1): selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT Arnd Bergmann (1): scsi: ufs: host: mediatek: Require CONFIG_PM Barnabás Czémán (4): clk: qcom: gcc-msm8953: Remove ALWAYS_ON flag from cpp_gdsc clk: qcom: gcc-msm8917: Remove ALWAYS_ON flag from cpp_gdsc backlight: qcom-wled: Support ovp values for PMI8994 backlight: qcom-wled: Change PM8950 WLED configurations Baruch Siach (1): Documentation: PCI: endpoint: Fix ntb/vntb copy & paste errors Ben Dooks (2): audit: move the compat_xxx_class[] extern declarations to audit_arch.h fs: add <linux/init_task.h> for 'init_fs' Billy Tsai (1): i3c: Move device name assignment after i3c_bus_init Bjorn Helgaas (4): PCI: Move pci_read_bridge_windows() below individual window accessors PCI: Supply bridge device, not secondary bus, to read window details PCI: Log bridge windows conditionally PCI: Log bridge info when first enumerating bridge Boris Burkov (1): btrfs: fix block_group_tree dirty_list corruption Brian Norris (1): PCI/PM: Avoid redundant delays on D3hot->D3cold Casey Connolly (3): arm64: dts: qcom: sdm845-oneplus: Don't mark ts supply boot-on arm64: dts: qcom: sdm845-oneplus: Don't keep panel regulator always on arm64: dts: qcom: sdm845-oneplus: Mark l14a regulator as boot-on Chaitanya Mishra (1): staging: greybus: lights: avoid NULL deref Chen Jinghuang (1): sched/rt: Skip currently executing CPU in rto_next_cpu() Chen-Yu Tsai (1): ARM: dts: allwinner: sun5i-a13-utoo-p66: delete "power-gpios" property Chengchang Tang (2): RDMA/hns: Fix WQ_MEM_RECLAIM warning RDMA/hns: Notify ULP of remaining soft-WCs during reset Chenghai Huang (2): crypto: hisilicon/zip - adjust the way to obtain the req in the callback function crypto: hisilicon/trng - modifying the order of header files Christian Loehle (1): cpuidle: menu: Cleanup after loadavg removal Christoph Hellwig (1): iomap: fix submission side handling of completion side errors Christophe Leroy (1): powerpc/uaccess: Move barrier_nospec() out of allow_read_{from/write}_user() Chuck Lever (6): RDMA/core: Fix a couple of obvious typos in comments svcrdma: Remove queue-shortening warnings svcrdma: Clean up comment in svc_rdma_accept() svcrdma: Increase the per-transport rw_ctx count svcrdma: Reduce the number of rdma_rw contexts per-QP RDMA/core: add rdma_rw_max_sge() helper for SQ sizing Colin Ian King (1): scsi: csiostor: Fix dereference of null pointer rn Cristian Ciocaltea (3): ASoC: nau8821: Consistently clear interrupts before unmasking ASoC: nau8821: Avoid unnecessary blocking in IRQ handler ASoC: nau8821: Fixup nau8821_enable_jack_detect() Dan Carpenter (2): EDAC/i5000: Fix snprintf() size calculation in calculate_dimm_size() EDAC/i5400: Fix snprintf() limit calculation in calculate_dimm_size() Daniel Machon (2): net: sparx5/lan969x: fix DWRR cost max to match hardware register width net: sparx5/lan969x: fix PTP clock max_adj value David Heidelberg (1): media: ccs: Accommodate C-PHY into the calculation Deepanshu Kartikey (1): gfs2: Fix use-after-free in iomap inline data write path Dmitry Baryshkov (6): arm64: dts: qcom: sdm630: fix gpu_speed_bin size arm64: dts: qcom: sdm845-db845c: drop CS from SPIO0 arm64: dts: qcom: sdm845-db845c: specify power for WiFi CH1 drm/msm/dpu: fix CMD panels on DPU 1.x - 3.x drm/msm/a2xx: fix pixel shader start on A225 clk: qcom: gfx3d: add parent to parent request map Dmytro Maluka (1): iommu/vt-d: Flush cache for PASID table before using it Dzmitry Sankouski (1): mfd: simple-mfd-i2c: Add MAX77705 support Edward Adam Davis (1): fs/ntfs3: prevent infinite loops caused by the next valid being the same Eric Dumazet (4): tcp: tcp_tx_timestamp() must look at the rtx queue inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP ipv6: fix a race in ip6_sock_set_v6only() ping: annotate data-races in ping_lookup() Eric Joyner (1): ionic: Rate limit unknown xcvr type messages Etienne AUJAMES (1): IB/cache: update gid cache on client reregister event Felix Gu (3): fbdev: of_display_timing: Fix device node reference leak in of_get_display_timings() fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe() pinctrl: equilibrium: Fix device node reference leak in pinbank_init() Fernando Fernandez Mancera (3): netfilter: nf_conncount: make nf_conncount_gc_list() to disable BH netfilter: nf_conncount: increase the connection clean up limit to 64 netfilter: nf_conncount: fix tracking of connections from localhost Filipe Manana (1): btrfs: qgroup: return correct error when deleting qgroup relation item Florian Westphal (4): netfilter: nf_tables: reset table validation state on abort netfilter: nft_compat: add more restrictions on netlink attributes netfilter: nft_set_hash: fix get operation on big endian netfilter: nf_conntrack_h323: don't pass uninitialised l3num value Francesco Lavra (1): spi: tools: Add include folder to .gitignore Frederic Weisbecker (2): rcu: s/boost_kthread_mutex/kthread_mutex rcu/exp: Move expedited kthread worker creation functions above rcutree_prepare_cpu() Fredrik Markstrom (1): i3c: dw: Initialize spinlock to avoid upsetting lockdep Geert Uytterhoeven (1): clk: Move clk_{save,restore}_context() to COMMON_CLK section George Moussalem (1): clk: qcom: gcc-ipq5018: flag sleep clock as critical Giovanni Cabiddu (1): crypto: qat - fix warning on adf_pfvf_pf_proto.c Govindarajulu Varadarajan (1): ublk: Validate SQE128 flag before accessing the cmd Greg Kroah-Hartman (1): Revert "mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms" Greg Thelen (1): selftests/memfd: delete unused declarations Guenter Roeck (1): Revert "hwmon: (ibmpex) fix use-after-free in high/low store" Gui-Dong Han (1): PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races Haotian Zhang (8): clk: qcom: Return correct error code in qcom_cc_probe_by_index() soc: qcom: cmd-db: Use devm_memremap() to fix memory leak in cmd_db_dev_probe HID: playstation: Add missing check for input_ff_create_memless PCI: mediatek: Fix IRQ domain leak when MSI allocation fails power: supply: bq27xxx: fix wrong errno when bus ops are unsupported clk: mediatek: Fix error handling in runtime PM setup mfd: arizona: Fix regulator resource leak on wm5102_clear_write_sequencer() failure leds: qcom-lpg: Check the return value of regmap_bulk_write() Hariprasad Kelam (1): octeontx2-pf: Unregister devlink on probe failure Harshit Mogalapalli (1): iio: sca3000: Fix a resource leak in sca3000_probe() Honggang LI (1): RDMA/rtrs: server: remove dead code Hou Tao (1): PCI/P2PDMA: Release per-CPU pgmap ref when vm_insert_page() fails Håkon Bugge (3): PCI: Do not attempt to set ExtTag for VFs PCI: Initialize RCB from pci_configure_device() PCI/ACPI: Restrict program_hpx_type2() to AER bits Ido Schimmel (1): selftests: mlxsw: tc_restrictions: Fix test failure with new iproute2 Ilpo Järvinen (1): PCI: Add defines for bridge window indexing Inseo An (1): netfilter: nf_tables: fix use-after-free in nf_tables_addchain() Ioana Ciornei (2): mfd: simple-mfd-i2c: Add compatible strings for Layerscape QIXIS FPGA mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order Jagadeesh Kona (3): clk: qcom: gcc-sm8450: Update the SDCC RCGs to use shared_floor_ops clk: qcom: gcc-sdx75: Update the SDCC RCGs to use shared_floor_ops clk: qcom: gcc-qdu1000: Update the SDCC RCGs to use shared_floor_ops Jakub Kicinski (1): bpftool: Fix truncated netlink dumps Jared Kangas (1): dmaengine: fsl-edma: don't explicitly disable clocks in .remove() Jens Axboe (2): io_uring/sync: validate passed in offset io_uring/cancel: de-unionize file and user_data in struct io_cancel_data Jerome Brunet (4): arm64: dts: amlogic: axg: assign the MMC signal clocks arm64: dts: amlogic: gx: assign the MMC signal clocks arm64: dts: amlogic: g12: assign the MMC B and C signal clocks arm64: dts: amlogic: g12: assign the MMC A signal clock Jian Shen (1): net: hns3: fix double free issue for tx spare buffer Jian Zhang (1): net: mctp-i2c: fix duplicate reception of old data Jiasheng Jiang (2): RDMA/rxe: Fix double free in rxe_srq_from_init fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot Jiayuan Chen (5): bpf, sockmap: Fix incorrect copied_seq calculation bpf, sockmap: Fix FIONREAD for sockmap net: atm: fix crash due to unvalidated vcc pointer in sigd_send() xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path serial: caif: fix use-after-free in caif_serial ldisc_close() Jinliang Zheng (1): procfs: fix missing RCU protection when reading real_parent in do_task_stat() Joel Fernandes (1): rcu: Refactor expedited handling check in rcu_read_unlock_special() Jorge Ramirez-Ortiz (1): soc: qcom: smem: handle ENOMEM error during probe Josh Poimboeuf (1): kbuild: Add objtool to top-level clean target Juergen Gross (1): x86/xen: make some functions static Justin Chen (1): usb: bdc: fix sleep during atomic Jörg Wedekind (1): PCI: Mark 3ware-9650SA Root Port Extended Tags as broken Kery Qi (1): watchdog: starfive-wdt: Fix PM reference leak in probe error path Konrad Dybcio (1): arm64: dts: qcom: sm6115: Add CX_MEM/DBGC GPU regions Konstantin Andreev (2): smack: /smack/doi must be > 0 smack: /smack/doi: accept previously used values Kuniyuki Iwashima (1): ipv6: Fix out-of-bound access in fib6_add_rt2node(). Kuppuswamy Sathyanarayanan (1): powercap: intel_rapl_tpmi: Remove FW_BUG from invalid version check Lai Jiangshan (3): workqueue: Factor out assign_rescuer_work() workqueue: Only assign rescuer work when really needed workqueue: Process rescuer work items one-by-one using a cursor Leo Yan (1): perf: arm_spe: Properly set hw.state on failures Li Chen (1): nvdimm: virtio_pmem: serialize flush requests Li Nan (1): md/raid10: fix any_working flag handling in raid10_sync_request Li Zhijian (1): RDMA/rxe: Fix race condition in QP timer handlers Luca Weiss (1): pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition Mahadevan P (1): drm/msm/disp/dpu: add merge3d support for sc7280 Malaya Kumar Rout (1): tools/power/x86/intel-speed-select: Fix file descriptor leak in isolate_cpus() Mario Limonciello (AMD) (3): crypto: ccp - Add an S4 restore flow crypto: ccp - Factor out ring destroy handling to a helper crypto: ccp - Send PSP_CMD_TEE_RING_DESTROY when PSP_CMD_TEE_RING_INIT fails Martin Blumenstingl (1): clk: meson: gxbb: Limit the HDMI PLL OD to /4 on GXL/GXM SoCs Matt Johnston (1): mctp i2c: initialise event handler read bytes Matthew Schwartz (1): mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms Miaoqian Lin (1): tracing: Properly process error handling in event_hist_trigger_parse() Mikulas Patocka (1): dm: use bio_clone_blkg_association Miquel Raynal (1): mtd: spinand: Fix kernel doc Miri Korenblit (1): wifi: cfg80211: stop NAN and P2P in cfg80211_leave Narayana Murty N (1): powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling Nicolas Cavallari (1): PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404] Nikolay Aleksandrov (1): net: bridge: mcast: always update mdb_n_entries for vlan contexts Nuno Sá (1): dma: dma-axi-dmac: fix SW cyclic transfers Olga Kornievskaia (1): pNFS: fix a missing wake up while waiting on NFS_LAYOUT_DRAIN Ondrej Mosnacek (2): ipc: don't audit capability check in ipc_permissions() ucount: check for CAP_SYS_RESOURCE using ns_capable_noaudit() Pablo Neira Ayuso (2): netfilter: nft_set_rbtree: check for partial overlaps in anonymous sets net: remove WARN_ON_ONCE when accessing forward path array Paolo Abeni (1): mptcp: fix receive space timestamp initialization Paul Chaignon (1): bpf: Fix bpf_xdp_store_bytes proto for read-only arg Paulo Alcantara (1): smb: client: fix potential UAF and double free in smb2_open_file() Petr Hodina (1): clk: qcom: dispcc-sdm845: Enable parents for pixel clocks Petr Mladek (2): module: add helper function for reading module_buildid() kallsyms/ftrace: set module buildid in ftrace_mod_address_lookup() Petre Rodan (1): iio: pressure: mprls0025pa: fix scan_type struct Puranjay Mohan (1): selftests/bpf: veristat: fix printing order in output_stats() Purva Yeshi (1): Documentation: trace: Refactor toctree Qi Tao (1): crypto: hisilicon/sec2 - support skcipher/aead fallback for hardware queue unavailable Qing Wang (1): ovl: Fix uninit-value in ovl_fill_real Rafael J. Wysocki (1): cpuidle: governors: menu: Always check timers with tick stopped Randy Dunlap (2): serial: imx: change SERIAL_IMX_CONSOLE to bool serial: SH_SCI: improve "DMA support" prompt René Rebe (1): net: sunhme: Fix sbus regression Ricardo Ribalda (1): media: uvcvideo: Fix allocation for small frame sizes Robert Marko (1): mfd: simple-mfd-i2c: Add Delta TN48M CPLD support Roger Pau Monne (1): Partial revert "x86/xen: fix balloon target initialization for PVH dom0" Roman Penyaev (1): RDMA/rtrs-srv: fix SG mapping Sagi Grimberg (1): fs/nfs: Fix readdir slow-start regression Sai Ritvik Tanksalkar (1): pstore/ram: fix buffer overflow in persistent_ram_save_old() Salah Triki (1): s390/cio: Fix device lifecycle handling in css_alloc_subchannel() Samuel Wu (1): PM: wakeup: Handle empty list in wakeup_sources_walk_start() Sasha Levin (1): Linux 6.6.128-rc1 Sean V Kelley (1): ACPI: CPPC: Fix remaining for_each_possible_cpu() to use online CPUs Sebastian Andrzej Siewior (3): scsi: efct: Use IRQF_ONESHOT and default primary handler EDAC/altera: Remove IRQF_ONESHOT mfd: wm8350-core: Use IRQF_ONESHOT Shardul Bankar (1): hfsplus: return error when node already exists in hfs_bnode_create Shinas Rasheed (4): octeon_ep: support to fetch firmware info octeon_ep: restructured interrupt handlers octeon_ep: support Octeon CN10K devices octeon_ep: set backpressure watermark for RX queues Shuai Xue (1): Documentation: tracing: Add PCI tracepoint documentation Srinivasan Shanmugam (1): drm/amdgpu: Use explicit VCN instance 0 in SR-IOV init Stanislav Fomichev (2): net: Add skb_dstref_steal and skb_dstref_restore net: Switch to skb_dstref_steal/skb_dstref_restore for ip_route_input callers Stefan Metzmacher (1): smb: client: correct value for smbd_max_fragmented_recv_size Steven Rostedt (1): tracing: Remove duplicate ENABLE_EVENT_STR and DISABLE_EVENT_STR macros SurajSonawane2415 (1): docs: fix WARNING document not included in any toctree Svyatoslav Ryhel (1): drivers: iio: mpu3050: use dev_err_probe for regulator request Taniya Das (1): clk: qcom: rcg2: compute 2d using duty fraction directly Teddy Astie (1): xen/virtio: Don't use grant-dma-ops when running as Dom0 Thomas Bogendoerfer (1): bonding: only set speed/duplex to unknown, if getting speed failed Thomas Fourier (3): auxdisplay: arm-charlcd: fix release_mem_region() size crypto: cavium - fix dma_free_coherent() size crypto: octeontx - fix dma_free_coherent() size Thomas Gleixner (1): hrtimer: Fix trace oddity Thomas Weißschuh (1): ARM: VDSO: Patch out __vdso_clock_getres() if unavailable Tom Lendacky (1): crypto: ccp - Move direct access to some PSP registers out of TEE Tuo Li (1): of: unittest: fix possible null-pointer dereferences in of_unittest_property_copy() Tzung-Bi Shih (1): platform/chrome: cros_ec_lightbar: Fix response size initialization Uwe Kleine-König (2): PCI/portdrv: Fix potential resource leak dmaengine: fsl-edma-main: Convert to platform remove callback returning void Val Packett (1): power: supply: qcom_battmgr: Recognize "LiP" as lithium-polymer Varun R Mallya (1): libbpf: Fix OOB read in btf_dump_get_bitfield_value Vimlesh Kumar (2): octeon_ep: disable per ring interrupts octeon_ep: ensure dbell BADDR updation Vincent Donnefort (1): Documentation: tracing: Add ring-buffer mapping Vladimir Zapolskiy (3): ARM: dts: lpc32xx: Set motor PWM #pwm-cells property value to 3 cells arm: dts: lpc32xx: add clocks property to Motor Control PWM device tree node clk: qcom: gcc-sm8550: Use floor ops for SDCC RCGs Votokina Victoria (1): nfc: hci: shdlc: Stop timers and work before freeing context Waqar Hameed (9): power: supply: ab8500: Fix use-after-free in power_supply_changed() power: supply: act8945a: Fix use-after-free in power_supply_changed() power: supply: bq256xx: Fix use-after-free in power_supply_changed() power: supply: bq25980: Fix use-after-free in power_supply_changed() power: supply: cpcap-battery: Fix use-after-free in power_supply_changed() power: supply: goldfish: Fix use-after-free in power_supply_changed() power: supply: rt9455: Fix use-after-free in power_supply_changed() power: supply: sbs-battery: Fix use-after-free in power_supply_changed() power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed() Wei Li (1): pinctrl: single: fix refcount leak in pcs_add_gpio_func() Weigang He (1): mtd: parsers: ofpart: fix OF node refcount leak in parse_fixed_partitions() Weili Qian (1): crypto: hisilicon/trng - support tfms sharing the device Yang Shen (2): crypto: hisilicon/zip - support deflate algorithm crypto: hisilicon/zip - remove zlib and gzip Yao Kai (1): rcu: Fix rcu_read_unlock() deadloop due to softirq Yi Liu (2): RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send RDMA/uverbs: Add __GFP_NOWARN to ib_uverbs_unmarshall_recv() kmalloc Yoshihiro Shimoda (1): PCI: Add PCIE_MSG_CODE_ASSERT_INTx message macros YunJe Shin (2): RDMA/siw: Fix potential NULL pointer dereference in header processing RDMA/umad: Reject negative data_len in ib_umad_write Yuxiong Wang (1): cxl: Fix premature commit_end increment on decoder commit failure Zhai Can (1): ACPI: PM: Add unused power resource quirk for THUNDEROBOT ZERO Zhiyu Zhang (1): fat: avoid parent link count underflow in rmdir Zilin Guan (3): soc: mediatek: svs: Fix memory leak in svs_enable_debug_write() mtd: parsers: Fix memory leak in mtd_parser_tplink_safeloader_parse() scsi: smartpqi: Fix memory leak in pqi_report_phys_luns() Ziyi Guo (6): wifi: ath10k: sdio: add missing lock protection in ath10k_sdio_fw_crashed_dump() net: mscc: ocelot: extract ocelot_xmit_timestamp() helper net: mscc: ocelot: split xmit into FDMA and register injection paths net: mscc: ocelot: add missing lock protection in ocelot_port_xmit_inj() net: usb: catc: enable basic endpoint checking xen-netback: reject zero-queue configuration from guest Zqiang (1): rcu: Remove local_irq_save/restore() in rcu_preempt_deferred_qs_handler() Documentation/PCI/endpoint/pci-vntb-howto.rst | 14 +- .../ethernet/marvell/octeon_ep.rst | 4 + Documentation/trace/events-pci.rst | 74 ++ Documentation/trace/index.rst | 95 +- Documentation/trace/ring-buffer-map.rst | 106 ++ Makefile | 15 +- .../boot/dts/allwinner/sun5i-a13-utoo-p66.dts | 1 + arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi | 3 +- arch/arm/kernel/vdso.c | 1 + arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 + .../boot/dts/amlogic/meson-g12-common.dtsi | 9 + arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 9 + arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 9 + .../freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 2 +- arch/arm64/boot/dts/qcom/sdm630.dtsi | 4 +- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 8 +- .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 3 +- arch/arm64/boot/dts/qcom/sm6115.dtsi | 8 +- arch/powerpc/include/asm/eeh.h | 2 + arch/powerpc/include/asm/kup.h | 2 - arch/powerpc/include/asm/uaccess.h | 4 + arch/powerpc/kernel/eeh_driver.c | 11 +- arch/powerpc/kernel/eeh_pe.c | 74 +- arch/x86/xen/enlighten.c | 2 +- arch/x86/xen/mmu.h | 4 - arch/x86/xen/mmu_pv.c | 11 +- arch/x86/xen/xen-ops.h | 1 - drivers/acpi/acpica/evregion.c | 4 +- drivers/acpi/cppc_acpi.c | 4 +- drivers/acpi/power.c | 13 + drivers/auxdisplay/arm-charlcd.c | 2 +- drivers/base/power/wakeirq.c | 9 +- drivers/base/power/wakeup.c | 4 +- drivers/block/ublk_drv.c | 6 +- drivers/char/tpm/st33zp24/st33zp24.c | 6 +- drivers/char/tpm/tpm_i2c_infineon.c | 6 +- drivers/clk/mediatek/clk-mtk.c | 12 +- drivers/clk/meson/gxbb.c | 17 +- drivers/clk/qcom/clk-rcg2.c | 7 +- drivers/clk/qcom/common.c | 2 +- drivers/clk/qcom/dispcc-sdm845.c | 4 +- drivers/clk/qcom/gcc-ipq5018.c | 1 + drivers/clk/qcom/gcc-msm8917.c | 1 - drivers/clk/qcom/gcc-msm8953.c | 1 - drivers/clk/qcom/gcc-qdu1000.c | 4 +- drivers/clk/qcom/gcc-sdx75.c | 4 +- drivers/clk/qcom/gcc-sm8450.c | 4 +- drivers/clk/qcom/gcc-sm8550.c | 4 +- drivers/cpuidle/cpuidle.c | 10 + drivers/cpuidle/governors/menu.c | 39 +- drivers/crypto/cavium/cpt/cptvf_main.c | 3 +- drivers/crypto/ccp/psp-dev.c | 71 ++ drivers/crypto/ccp/psp-dev.h | 18 + drivers/crypto/ccp/sp-dev.c | 12 + drivers/crypto/ccp/sp-dev.h | 6 + drivers/crypto/ccp/sp-pci.c | 34 +- drivers/crypto/ccp/tee-dev.c | 95 +- drivers/crypto/ccp/tee-dev.h | 16 +- drivers/crypto/hisilicon/sec2/sec_crypto.c | 62 +- drivers/crypto/hisilicon/trng/trng.c | 123 ++- drivers/crypto/hisilicon/zip/zip_crypto.c | 302 +----- drivers/crypto/hisilicon/zip/zip_main.c | 4 +- .../intel/qat/qat_common/adf_pfvf_pf_proto.c | 10 + .../crypto/marvell/octeontx/otx_cptvf_main.c | 3 +- drivers/cxl/core/hdm.c | 3 +- drivers/dma/dma-axi-dmac.c | 3 +- drivers/dma/fsl-edma-main.c | 7 +- drivers/dma/mediatek/mtk-uart-apdma.c | 10 +- drivers/edac/altera_edac.c | 11 +- drivers/edac/i5000_edac.c | 1 + drivers/edac/i5400_edac.c | 2 +- drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c | 45 +- drivers/gpu/drm/msm/adreno/a2xx_gpu.c | 5 +- .../msm/disp/dpu1/catalog/dpu_7_2_sc7280.h | 14 +- .../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 7 +- drivers/hid/hid-playstation.c | 4 +- drivers/hwmon/ibmpex.c | 9 +- .../coresight/coresight-etm3x-core.c | 12 +- drivers/i3c/master.c | 6 +- drivers/i3c/master/dw-i3c-master.c | 2 + drivers/iio/accel/sca3000.c | 6 +- drivers/iio/gyro/mpu3050-core.c | 6 +- drivers/iio/pressure/mprls0025pa.c | 4 +- drivers/infiniband/core/cache.c | 3 +- drivers/infiniband/core/rw.c | 53 +- drivers/infiniband/core/user_mad.c | 8 +- drivers/infiniband/core/uverbs_cmd.c | 7 +- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 26 +- drivers/infiniband/sw/rxe/rxe_comp.c | 3 + drivers/infiniband/sw/rxe/rxe_req.c | 3 + drivers/infiniband/sw/rxe/rxe_srq.c | 6 +- drivers/infiniband/sw/siw/siw_qp_rx.c | 3 +- drivers/infiniband/ulp/rtrs/rtrs-srv.c | 33 +- drivers/iommu/intel/pasid.c | 7 +- drivers/leds/rgb/leds-qcom-lpg.c | 8 +- drivers/md/dm.c | 2 + drivers/md/raid10.c | 2 +- drivers/media/i2c/ccs/ccs-core.c | 16 +- drivers/media/usb/uvc/uvc_video.c | 3 +- drivers/mfd/Kconfig | 24 + drivers/mfd/arizona-core.c | 2 +- drivers/mfd/simple-mfd-i2c.c | 33 +- .../mtd/nand/raw/cadence-nand-controller.c | 2 +- drivers/mtd/parsers/ofpart_core.c | 16 +- drivers/mtd/parsers/tplink_safeloader.c | 1 + drivers/net/bonding/bond_main.c | 15 +- drivers/net/caif/caif_serial.c | 5 +- .../net/ethernet/hisilicon/hns3/hns3_enet.c | 11 +- .../net/ethernet/marvell/octeon_ep/Makefile | 3 +- .../marvell/octeon_ep/octep_cn9k_pf.c | 189 +++- .../marvell/octeon_ep/octep_cnxk_pf.c | 935 ++++++++++++++++++ .../ethernet/marvell/octeon_ep/octep_config.h | 32 +- .../marvell/octeon_ep/octep_ctrl_net.c | 24 +- .../marvell/octeon_ep/octep_ctrl_net.h | 18 + .../ethernet/marvell/octeon_ep/octep_main.c | 233 ++++- .../ethernet/marvell/octeon_ep/octep_main.h | 21 +- .../marvell/octeon_ep/octep_regs_cn9k_pf.h | 5 + .../marvell/octeon_ep/octep_regs_cnxk_pf.h | 404 ++++++++ .../net/ethernet/marvell/octeon_ep/octep_rx.c | 8 +- .../net/ethernet/marvell/octeontx2/af/rvu.c | 11 + .../ethernet/marvell/octeontx2/nic/otx2_pf.c | 1 + .../ethernet/microchip/sparx5/sparx5_ptp.c | 2 +- .../ethernet/microchip/sparx5/sparx5_qos.h | 2 +- drivers/net/ethernet/mscc/ocelot_net.c | 75 +- .../ethernet/pensando/ionic/ionic_ethtool.c | 7 +- drivers/net/ethernet/sun/sunhme.c | 3 + drivers/net/mctp/mctp-i2c.c | 9 + drivers/net/usb/catc.c | 37 +- drivers/net/wireless/ath/ath10k/sdio.c | 6 + drivers/net/xen-netback/xenbus.c | 5 +- drivers/nvdimm/nd_virtio.c | 3 +- drivers/nvdimm/virtio_pmem.c | 1 + drivers/nvdimm/virtio_pmem.h | 4 + drivers/of/unittest.c | 6 +- drivers/pci/controller/pcie-mediatek.c | 4 +- drivers/pci/p2pdma.c | 1 + drivers/pci/pci-acpi.c | 59 +- drivers/pci/pci.c | 3 + drivers/pci/pci.h | 25 + drivers/pci/pcie/aer.c | 3 - drivers/pci/pcie/portdrv.c | 6 +- drivers/pci/probe.c | 189 ++-- drivers/pci/quirks.c | 5 + drivers/perf/arm_spe_pmu.c | 18 +- drivers/pinctrl/pinctrl-equilibrium.c | 1 + drivers/pinctrl/pinctrl-single.c | 2 + .../pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 2 +- drivers/platform/chrome/cros_ec_lightbar.c | 2 +- drivers/platform/chrome/cros_typec_switch.c | 6 +- drivers/power/reset/nvmem-reboot-mode.c | 15 +- drivers/power/supply/ab8500_charger.c | 40 +- drivers/power/supply/act8945a_charger.c | 16 +- drivers/power/supply/bq256xx_charger.c | 12 +- drivers/power/supply/bq25980_charger.c | 12 +- drivers/power/supply/bq27xxx_battery.c | 6 +- drivers/power/supply/cpcap-battery.c | 8 +- drivers/power/supply/goldfish_battery.c | 12 +- drivers/power/supply/qcom_battmgr.c | 3 +- drivers/power/supply/rt9455_charger.c | 17 +- drivers/power/supply/sbs-battery.c | 36 +- drivers/power/supply/wm97xx_battery.c | 34 +- drivers/powercap/intel_rapl_tpmi.c | 2 +- drivers/regulator/core.c | 55 +- drivers/s390/cio/css.c | 2 +- drivers/scsi/csiostor/csio_scsi.c | 3 +- drivers/scsi/elx/efct/efct_driver.c | 8 +- drivers/scsi/smartpqi/smartpqi_init.c | 13 +- drivers/soc/mediatek/mtk-svs.c | 5 +- drivers/soc/qcom/cmd-db.c | 7 +- drivers/soc/qcom/smem.c | 4 +- drivers/staging/greybus/light.c | 8 +- drivers/tty/serial/Kconfig | 8 +- drivers/ufs/host/Kconfig | 1 + drivers/ufs/host/ufs-mediatek.c | 12 +- drivers/usb/gadget/udc/bdc/bdc_core.c | 4 +- drivers/video/backlight/qcom-wled.c | 42 +- drivers/video/fbdev/au1200fb.c | 6 +- drivers/video/of_display_timing.c | 6 +- drivers/watchdog/starfive-wdt.c | 2 +- drivers/xen/balloon.c | 19 +- drivers/xen/grant-dma-ops.c | 3 +- drivers/xen/unpopulated-alloc.c | 3 + fs/btrfs/qgroup.c | 4 +- fs/btrfs/transaction.c | 7 - fs/fat/namei_msdos.c | 7 +- fs/fat/namei_vfat.c | 7 +- fs/fs_struct.c | 1 + fs/gfs2/bmap.c | 21 +- fs/gfs2/glock.c | 36 +- fs/gfs2/glock.h | 3 +- fs/gfs2/inode.c | 18 +- fs/hfsplus/bnode.c | 2 +- fs/iomap/direct-io.c | 10 +- fs/nfs/dir.c | 4 +- fs/nfs/pnfs.c | 3 +- fs/nfsd/nfs4idmap.c | 48 +- fs/nfsd/nfs4proc.c | 2 - fs/nfsd/nfs4xdr.c | 16 + fs/ntfs3/file.c | 8 +- fs/ntfs3/fslog.c | 3 + fs/overlayfs/readdir.c | 2 +- fs/proc/array.c | 2 +- fs/pstore/ram_core.c | 11 + fs/quota/quota.c | 1 + fs/smb/client/smb2file.c | 2 + fs/smb/client/smbdirect.c | 19 +- include/linux/audit.h | 6 - include/linux/audit_arch.h | 7 + include/linux/capability.h | 6 + include/linux/clk.h | 48 +- include/linux/ftrace.h | 6 +- include/linux/mfd/wm8350/core.h | 2 +- include/linux/module.h | 9 + include/linux/mtd/spinand.h | 2 +- include/linux/psp.h | 1 + include/linux/skbuff.h | 32 + include/linux/skmsg.h | 70 +- include/linux/u64_stats_sync.h | 10 + include/net/ipv6.h | 11 +- include/net/netfilter/nf_conntrack_count.h | 1 + include/rdma/ib_verbs.h | 2 +- include/rdma/rw.h | 2 + include/ufs/ufshcd.h | 4 - include/xen/xen.h | 2 + io_uring/cancel.h | 6 +- io_uring/sync.c | 2 + ipc/ipc_sysctl.c | 2 +- kernel/kallsyms.c | 4 +- kernel/module/kallsyms.c | 9 +- kernel/rcu/tree.c | 98 +- kernel/rcu/tree.h | 4 +- kernel/rcu/tree_plugin.h | 109 +- kernel/sched/rt.c | 5 + kernel/time/hrtimer.c | 2 +- kernel/trace/ftrace.c | 5 +- kernel/trace/trace_events.c | 5 - kernel/trace/trace_events_hist.c | 2 +- kernel/ucount.c | 2 +- kernel/workqueue.c | 92 +- net/atm/signaling.c | 56 +- net/bridge/br_multicast.c | 45 +- net/core/dev.c | 2 +- net/core/filter.c | 2 +- net/core/skmsg.c | 30 +- net/ipv4/icmp.c | 36 +- net/ipv4/ip_options.c | 5 +- net/ipv4/ping.c | 31 +- net/ipv4/tcp.c | 3 + net/ipv4/tcp_bpf.c | 25 +- net/ipv4/udp_bpf.c | 23 +- net/ipv6/icmp.c | 6 + net/ipv6/ip6_fib.c | 2 +- net/mptcp/protocol.c | 8 +- net/mptcp/protocol.h | 5 + net/netfilter/nf_conncount.c | 54 +- net/netfilter/nf_conntrack_h323_main.c | 10 +- net/netfilter/nf_tables_api.c | 8 + net/netfilter/nft_compat.c | 13 +- net/netfilter/nft_connlimit.c | 7 +- net/netfilter/nft_counter.c | 4 +- net/netfilter/nft_set_hash.c | 9 +- net/netfilter/nft_set_rbtree.c | 30 +- net/nfc/hci/llc_shdlc.c | 8 + net/rds/send.c | 6 +- net/sunrpc/xprtrdma/svc_rdma_transport.c | 43 +- net/wireless/core.c | 4 +- security/smack/smackfs.c | 79 +- sound/soc/codecs/nau8821.c | 85 +- sound/soc/codecs/nau8821.h | 3 +- tools/bpf/bpftool/net.c | 5 +- tools/lib/bpf/btf_dump.c | 9 + tools/lib/bpf/netlink.c | 4 +- tools/objtool/Makefile | 2 + .../x86/intel-speed-select/isst-config.c | 2 + tools/spi/.gitignore | 1 + tools/testing/selftests/bpf/veristat.c | 2 +- .../drivers/net/mlxsw/tc_restrictions.sh | 4 +- tools/testing/selftests/memfd/memfd_test.c | 123 ++- .../net/forwarding/vxlan_bridge_1d.sh | 26 +- .../net/forwarding/vxlan_bridge_1d_ipv6.sh | 2 +- 280 files changed, 4807 insertions(+), 1468 deletions(-) create mode 100644 Documentation/trace/events-pci.rst create mode 100644 Documentation/trace/ring-buffer-map.rst create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_cnxk_pf.c create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_regs_cnxk_pf.h -- 2.51.0

2 months, 2 weeks

[PATCH 5.10 000/147] 5.10.252-rc1 review

by Sasha Levin

This is the start of the stable review cycle for the 5.10.252 release. There are 147 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Mon Mar 2 06:17:30 PM UTC 2026. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/… or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below. Thanks, Sasha ------------- Pseudo-Shortlog of commits: Aboorva Devarajan (1): cpuidle: Skip governor when only one idle state is available Aleksei Oladko (1): selftests: forwarding: vxlan_bridge_1d: fix test failure with br_netfilter enabled Alexander Koskovich (1): power: reset: nvmem-reboot-mode: respect cell size for nvmem_cell_write Allison Henderson (1): net/rds: rds_sendmsg should not discard payload_len Alok Tiwari (1): mtd: rawnand: cadence: Fix return type of CDMA send-and-wait helper Alper Ak (2): tpm: tpm_i2c_infineon: Fix locality leak on get_burstcount() failure tpm: st33zp24: Fix missing cleanup on get_burstcount() error Andreas Gruenbacher (6): gfs2: Add new gfs2_iomap_get helper gfs2: Turn gfs2_extent_map into gfs2_{get,alloc}_extent gfs2: Replace gfs2_lblk_to_dblk with gfs2_get_extent gfs2: Add wrapper for iomap_file_buffered_write gfs2: Move the inode glock locking to gfs2_file_buffered_write gfs2: Add metapath_dibh helper André Draszik (1): regulator: core: move supply check earlier in set_machine_constraints() AngeloGioacchino Del Regno (2): arm64: dts: qcom: sdm630: Add qfprom subnodes dmaengine: mediatek: uart-apdma: Fix above 4G addressing TX/RX Anshumali Gaur (1): octeontx2-af: Fix PF driver crash with kexec kernel booting Anthony Iliopoulos (1): nfsd: never defer requests during idmap lookup Antonio Borneo (1): coresight: etm3x: Fix cpulocked warning on cpuhp Ben Dooks (1): fs: add <linux/init_task.h> for 'init_fs' Billy Tsai (1): i3c: Move device name assignment after i3c_bus_init Chaitanya Mishra (1): staging: greybus: lights: avoid NULL deref Chen Jinghuang (1): sched/rt: Skip currently executing CPU in rto_next_cpu() Chen-Yu Tsai (1): ARM: dts: allwinner: sun5i-a13-utoo-p66: delete "power-gpios" property Christian Kohlschütter (1): regulator: core: Fix off-on-delay-us for always-on/boot-on regulators Christoph Hellwig (1): iomap: fix submission side handling of completion side errors Chuck Lever (9): svcrdma: Add a batch Receive posting mechanism svcrdma: Use svc_rdma_refresh_recvs() in wc_receive svcrdma: Maintain a Receive water mark RDMA/core: Fix a couple of obvious typos in comments svcrdma: Remove queue-shortening warnings svcrdma: Clean up comment in svc_rdma_accept() svcrdma: Increase the per-transport rw_ctx count svcrdma: Reduce the number of rdma_rw contexts per-QP RDMA/core: add rdma_rw_max_sge() helper for SQ sizing Colin Ian King (1): scsi: csiostor: Fix dereference of null pointer rn Dan Carpenter (2): EDAC/i5000: Fix snprintf() size calculation in calculate_dimm_size() EDAC/i5400: Fix snprintf() limit calculation in calculate_dimm_size() Davide Caratti (1): selftests: forwarding: tc_actions: cleanup temporary files when test is aborted Deepanshu Kartikey (1): gfs2: Fix use-after-free in iomap inline data write path Dmitry Baryshkov (3): arm64: dts: qcom: sdm630: fix gpu_speed_bin size arm64: dts: qcom: sdm845-db845c: specify power for WiFi CH1 clk: qcom: dispcc-sdm845: convert to parent data Dmytro Maluka (1): iommu/vt-d: Flush cache for PASID table before using it Douglas Anderson (1): regulator: core: Shorten off-on-delay-us for always-on/boot-on by time since booted Eric Dumazet (2): tcp: tcp_tx_timestamp() must look at the rtx queue ipv6: fix a race in ip6_sock_set_v6only() Eric Joyner (1): ionic: Rate limit unknown xcvr type messages Felix Gu (2): fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe() pinctrl: equilibrium: Fix device node reference leak in pinbank_init() Fernando Fernandez Mancera (3): netfilter: nf_conncount: make nf_conncount_gc_list() to disable BH netfilter: nf_conncount: increase the connection clean up limit to 64 netfilter: nf_conncount: fix tracking of connections from localhost Filipe Manana (1): btrfs: qgroup: return correct error when deleting qgroup relation item Florian Westphal (2): netfilter: nft_set_hash: fix get operation on big endian netfilter: nf_conntrack_h323: don't pass uninitialised l3num value Francesco Lavra (1): spi: tools: Add include folder to .gitignore Geert Uytterhoeven (1): clk: Move clk_{save,restore}_context() to COMMON_CLK section Greg Kroah-Hartman (1): Revert "mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms" Guenter Roeck (1): Revert "hwmon: (ibmpex) fix use-after-free in high/low store" Gui-Dong Han (1): PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races Haotian Zhang (5): clk: qcom: Return correct error code in qcom_cc_probe_by_index() soc: qcom: cmd-db: Use devm_memremap() to fix memory leak in cmd_db_dev_probe PCI: mediatek: Fix IRQ domain leak when MSI allocation fails power: supply: bq27xxx: fix wrong errno when bus ops are unsupported mfd: arizona: Fix regulator resource leak on wm5102_clear_write_sequencer() failure Harshit Mogalapalli (1): iio: sca3000: Fix a resource leak in sca3000_probe() Honggang LI (1): RDMA/rtrs: server: remove dead code Håkon Bugge (2): PCI: Do not attempt to set ExtTag for VFs PCI: Initialize RCB from pci_configure_device() Ido Schimmel (2): selftests: mlxsw: tc_restrictions: Fix test failure with new iproute2 selftests: forwarding: tc_actions: Use ncat instead of nc Jamie Iles (1): i3c: remove i2c board info from i2c_dev_desc Jerome Brunet (4): arm64: dts: amlogic: axg: assign the MMC signal clocks arm64: dts: amlogic: gx: assign the MMC signal clocks arm64: dts: amlogic: g12: assign the MMC B and C signal clocks arm64: dts: amlogic: g12: assign the MMC A signal clock Jiasheng Jiang (1): RDMA/rxe: Fix double free in rxe_srq_from_init Jiayuan Chen (2): net: atm: fix crash due to unvalidated vcc pointer in sigd_send() serial: caif: fix use-after-free in caif_serial ldisc_close() Jinliang Zheng (1): procfs: fix missing RCU protection when reading real_parent in do_task_stat() Justin Chen (1): usb: bdc: fix sleep during atomic Jörg Wedekind (1): PCI: Mark 3ware-9650SA Root Port Extended Tags as broken Konstantin Andreev (2): smack: /smack/doi must be > 0 smack: /smack/doi: accept previously used values Krzysztof Kozlowski (1): arm64: dts: qcom: sdm630: correct QFPROM byte offsets Li Chen (1): nvdimm: virtio_pmem: serialize flush requests Li Nan (1): md/raid10: fix any_working flag handling in raid10_sync_request Linus Walleij (1): power: supply: wm97xx_battery: Convert to GPIO descriptor Mario Limonciello (AMD) (1): crypto: ccp - Add an S4 restore flow Mark Brown (1): regulator: Flag uncontrollable regulators as always_on Martin Blumenstingl (1): clk: meson: gxbb: Limit the HDMI PLL OD to /4 on GXL/GXM SoCs Matthew Schwartz (1): mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms Matthias Kaehlcke (1): regulator: core: Use ktime_get_boottime() to determine how long a regulator was off Miri Korenblit (1): wifi: cfg80211: stop NAN and P2P in cfg80211_leave Narayana Murty N (1): powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling Nuno Sá (1): dma: dma-axi-dmac: fix SW cyclic transfers Olga Kornievskaia (1): pNFS: fix a missing wake up while waiting on NFS_LAYOUT_DRAIN Oliver Neukum (1): usbb: catc: use correct API for MAC addresses Ondrej Mosnacek (1): ucount: check for CAP_SYS_RESOURCE using ns_capable_noaudit() Pablo Neira Ayuso (1): netfilter: nft_set_rbtree: check for partial overlaps in anonymous sets Paul Cercueil (2): PM: core: Redefine pm_ptr() macro PM: core: Add new *_PM_OPS macros, deprecate old ones Petr Hodina (1): clk: qcom: dispcc-sdm845: Enable parents for pixel clocks Qing Wang (1): ovl: Fix uninit-value in ovl_fill_real Randy Dunlap (2): serial: imx: change SERIAL_IMX_CONSOLE to bool serial: SH_SCI: improve "DMA support" prompt Rui Feng (1): misc: rtsx: Add SD Express mode support for RTS5261 Sai Ritvik Tanksalkar (1): pstore/ram: fix buffer overflow in persistent_ram_save_old() Salah Triki (1): s390/cio: Fix device lifecycle handling in css_alloc_subchannel() Samuel Wu (1): PM: wakeup: Handle empty list in wakeup_sources_walk_start() Sasha Levin (1): Linux 5.10.252-rc1 Sebastian Andrzej Siewior (2): EDAC/altera: Remove IRQF_ONESHOT mfd: wm8350-core: Use IRQF_ONESHOT Shardul Bankar (1): hfsplus: return error when node already exists in hfs_bnode_create Srinivasan Shanmugam (1): drm/amdgpu: Use explicit VCN instance 0 in SR-IOV init Steven Rostedt (1): tracing: Remove duplicate ENABLE_EVENT_STR and DISABLE_EVENT_STR macros Svyatoslav Ryhel (1): drivers: iio: mpu3050: use dev_err_probe for regulator request Thomas Bogendoerfer (1): bonding: only set speed/duplex to unknown, if getting speed failed Thomas Fourier (3): auxdisplay: arm-charlcd: fix release_mem_region() size crypto: cavium - fix dma_free_coherent() size crypto: octeontx - fix dma_free_coherent() size Thomas Gleixner (1): hrtimer: Fix trace oddity Thomas Weißschuh (1): ARM: VDSO: Patch out __vdso_clock_getres() if unavailable Tzung-Bi Shih (1): platform/chrome: cros_ec_lightbar: Fix response size initialization Ulf Hansson (1): mmc: core: Initial support for SD express card/host Uwe Kleine-König (1): PCI/portdrv: Fix potential resource leak Vincent Whitchurch (2): regulator: core: Respect off_on_delay at startup regulator: core: Fix off_on_delay handling Vladimir Zapolskiy (2): ARM: dts: lpc32xx: Set motor PWM #pwm-cells property value to 3 cells arm: dts: lpc32xx: add clocks property to Motor Control PWM device tree node Waqar Hameed (7): power: supply: act8945a: Fix use-after-free in power_supply_changed() power: supply: bq25980: Fix use-after-free in power_supply_changed() power: supply: cpcap-battery: Fix use-after-free in power_supply_changed() power: supply: goldfish: Fix use-after-free in power_supply_changed() power: supply: rt9455: Fix use-after-free in power_supply_changed() power: supply: sbs-battery: Fix use-after-free in power_supply_changed() power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed() Wei Li (1): pinctrl: single: fix refcount leak in pcs_add_gpio_func() Yi Liu (2): RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send RDMA/uverbs: Add __GFP_NOWARN to ib_uverbs_unmarshall_recv() kmalloc YunJe Shin (2): RDMA/siw: Fix potential NULL pointer dereference in header processing RDMA/umad: Reject negative data_len in ib_umad_write Zhiyu Zhang (1): fat: avoid parent link count underflow in rmdir Ziyi Guo (3): wifi: ath10k: sdio: add missing lock protection in ath10k_sdio_fw_crashed_dump() net: usb: catc: enable basic endpoint checking xen-netback: reject zero-queue configuration from guest Makefile | 4 +- arch/arm/boot/dts/lpc32xx.dtsi | 3 +- arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 1 + arch/arm/kernel/vdso.c | 1 + arch/arm/mach-pxa/mioa701.c | 1 - arch/arm/mach-pxa/palm27x.c | 1 - arch/arm/mach-pxa/palmte2.c | 1 - arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 + .../boot/dts/amlogic/meson-g12-common.dtsi | 9 + arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 9 + arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 9 + arch/arm64/boot/dts/qcom/sdm630.dtsi | 10 + arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 7 + arch/powerpc/include/asm/eeh.h | 2 + arch/powerpc/kernel/eeh_driver.c | 11 +- arch/powerpc/kernel/eeh_pe.c | 74 +++++- drivers/auxdisplay/arm-charlcd.c | 2 +- drivers/base/power/wakeirq.c | 9 +- drivers/base/power/wakeup.c | 4 +- drivers/char/tpm/st33zp24/st33zp24.c | 6 +- drivers/char/tpm/tpm_i2c_infineon.c | 6 +- drivers/clk/meson/gxbb.c | 17 +- drivers/clk/qcom/common.c | 2 +- drivers/clk/qcom/dispcc-sdm845.c | 220 ++++++++--------- drivers/cpuidle/cpuidle.c | 10 + drivers/crypto/cavium/cpt/cptvf_main.c | 3 +- drivers/crypto/ccp/psp-dev.c | 11 + drivers/crypto/ccp/sp-dev.c | 12 + drivers/crypto/ccp/sp-dev.h | 3 + drivers/crypto/ccp/sp-pci.c | 16 +- drivers/crypto/ccp/tee-dev.c | 5 + drivers/crypto/ccp/tee-dev.h | 1 + .../crypto/marvell/octeontx/otx_cptvf_main.c | 3 +- drivers/dma/dma-axi-dmac.c | 3 +- drivers/dma/mediatek/mtk-uart-apdma.c | 10 +- drivers/edac/altera_edac.c | 11 +- drivers/edac/i5000_edac.c | 1 + drivers/edac/i5400_edac.c | 2 +- drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c | 45 ++-- drivers/hwmon/ibmpex.c | 9 +- .../coresight/coresight-etm3x-core.c | 12 +- drivers/i3c/master.c | 21 +- drivers/iio/accel/sca3000.c | 6 +- drivers/iio/gyro/mpu3050-core.c | 6 +- drivers/infiniband/core/rw.c | 53 ++-- drivers/infiniband/core/user_mad.c | 8 +- drivers/infiniband/core/uverbs_cmd.c | 7 +- drivers/infiniband/sw/rxe/rxe_srq.c | 3 + drivers/infiniband/sw/siw/siw_qp_rx.c | 3 +- drivers/infiniband/ulp/rtrs/rtrs-srv.c | 8 +- drivers/iommu/intel/pasid.c | 7 +- drivers/md/raid10.c | 2 +- drivers/mfd/arizona-core.c | 2 +- drivers/misc/cardreader/rts5261.c | 4 + drivers/misc/cardreader/rts5261.h | 23 -- drivers/misc/cardreader/rtsx_pcr.c | 5 + drivers/mmc/core/core.c | 15 +- drivers/mmc/core/host.h | 6 + drivers/mmc/core/sd_ops.c | 49 +++- drivers/mmc/core/sd_ops.h | 1 + .../mtd/nand/raw/cadence-nand-controller.c | 2 +- drivers/net/bonding/bond_main.c | 15 +- drivers/net/caif/caif_serial.c | 5 +- .../net/ethernet/marvell/octeontx2/af/rvu.c | 11 + .../ethernet/pensando/ionic/ionic_ethtool.c | 7 +- drivers/net/usb/catc.c | 59 ++++- drivers/net/wireless/ath/ath10k/sdio.c | 6 + drivers/net/xen-netback/xenbus.c | 5 +- drivers/nvdimm/nd_virtio.c | 3 +- drivers/nvdimm/virtio_pmem.c | 1 + drivers/nvdimm/virtio_pmem.h | 4 + drivers/pci/controller/pcie-mediatek.c | 4 +- drivers/pci/pcie/portdrv_core.c | 6 +- drivers/pci/probe.c | 35 ++- drivers/pci/quirks.c | 1 + drivers/pinctrl/pinctrl-equilibrium.c | 1 + drivers/pinctrl/pinctrl-single.c | 2 + drivers/platform/chrome/cros_ec_lightbar.c | 2 +- drivers/power/reset/nvmem-reboot-mode.c | 15 +- drivers/power/supply/act8945a_charger.c | 16 +- drivers/power/supply/bq25980_charger.c | 12 +- drivers/power/supply/bq27xxx_battery.c | 6 +- drivers/power/supply/cpcap-battery.c | 8 +- drivers/power/supply/goldfish_battery.c | 12 +- drivers/power/supply/rt9455_charger.c | 17 +- drivers/power/supply/sbs-battery.c | 36 +-- drivers/power/supply/wm97xx_battery.c | 69 +++--- drivers/regulator/core.c | 68 +++--- drivers/s390/cio/css.c | 2 +- drivers/scsi/csiostor/csio_scsi.c | 3 +- drivers/soc/qcom/cmd-db.c | 7 +- drivers/staging/greybus/light.c | 8 +- drivers/tty/serial/Kconfig | 8 +- drivers/usb/gadget/udc/bdc/bdc_core.c | 4 +- drivers/video/fbdev/au1200fb.c | 6 +- fs/btrfs/qgroup.c | 4 +- fs/fat/namei_msdos.c | 7 +- fs/fat/namei_vfat.c | 7 +- fs/fs_struct.c | 1 + fs/gfs2/bmap.c | 227 +++++++----------- fs/gfs2/bmap.h | 13 +- fs/gfs2/dir.c | 13 +- fs/gfs2/file.c | 59 ++++- fs/gfs2/log.c | 6 +- fs/gfs2/quota.c | 4 +- fs/gfs2/recovery.c | 4 +- fs/hfsplus/bnode.c | 2 +- fs/iomap/direct-io.c | 10 +- fs/nfs/pnfs.c | 3 +- fs/nfsd/nfs4idmap.c | 48 +++- fs/nfsd/nfs4proc.c | 2 - fs/nfsd/nfs4xdr.c | 16 ++ fs/overlayfs/readdir.c | 2 +- fs/proc/array.c | 2 +- fs/pstore/ram_core.c | 11 + include/linux/clk.h | 48 ++-- include/linux/i3c/master.h | 1 - include/linux/mfd/wm8350/core.h | 2 +- include/linux/mmc/host.h | 7 + include/linux/pm.h | 80 +++--- include/linux/regulator/driver.h | 2 +- include/linux/rtsx_pci.h | 23 ++ include/linux/sunrpc/svc_rdma.h | 2 + include/linux/wm97xx.h | 1 - include/net/ipv6.h | 11 +- include/net/netfilter/nf_conntrack_count.h | 1 + include/rdma/ib_verbs.h | 2 +- include/rdma/rw.h | 2 + kernel/sched/rt.c | 5 + kernel/time/hrtimer.c | 2 +- kernel/trace/trace_events.c | 5 - kernel/ucount.c | 2 +- net/atm/signaling.c | 56 ++++- net/ipv4/tcp.c | 3 + net/netfilter/nf_conncount.c | 54 +++-- net/netfilter/nf_conntrack_h323_main.c | 10 +- net/netfilter/nft_connlimit.c | 7 +- net/netfilter/nft_set_hash.c | 9 +- net/netfilter/nft_set_rbtree.c | 30 ++- net/rds/send.c | 6 +- net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 89 ++++--- net/sunrpc/xprtrdma/svc_rdma_transport.c | 46 ++-- net/wireless/core.c | 4 +- security/smack/smackfs.c | 79 +++--- tools/spi/.gitignore | 1 + .../drivers/net/mlxsw/tc_restrictions.sh | 4 +- .../selftests/net/forwarding/tc_actions.sh | 18 +- .../net/forwarding/vxlan_bridge_1d.sh | 26 +- 148 files changed, 1523 insertions(+), 823 deletions(-) -- 2.51.0

2 months, 2 weeks

HIRE META TECH RECOVERY PRO – The Most Legitimate Crypto Recovery Firm

by donaldauthur918＠gmail.com

I am pleased to provide a formal appraisal of META TECH RECOVERY PRO, a practitioner with a strong reputation in cybersecurity and digital asset recovery, particularly for Bitcoin, Ethereum, and USDT. This review assesses professional competence, methodological rigor, outcomes, and alignment with industry practices. Initiate action promptly before recovery opportunities diminish. for help, contact them via. https://metatechrecoverypro.com Telegram:@metatechrecoveryproteam. W/S +1 (469) 692‑8049 Thank you. Methodology and Operational Rigor META TECH RECOVERY PRO employs a methodical, evidence-based approach. Initial engagements begin with a detailed incident assessment to identify compromise type, evaluate forensic artifacts, and establish a prioritized recovery plan. The workflow integrates on-chain analysis (ledger records and blockchain explorers) with off-chain intelligence (exchange KYC timelines, server logs), producing a comprehensive investigative posture. The practitioner uses industry-accepted tools for chain tracing, address clustering, and transaction graph analysis, combining automated methods with manual review to minimize false positives. Documentation and chain-of-custody practices are maintained to preserve evidentiary admissibility for legal or regulatory escalation. Illustrative Outcomes Representative engagements demonstrate meaningful recoveries and remediation. In unauthorized wallet-access cases, META TECH RECOVERY PRO has identified transaction patterns indicating intermediate custodial transfers and coordinated with centralized exchanges to freeze or flag suspect funds, achieving partial or full restitution. In Ethereum smart-contract exploits, analysis of contract vulnerabilities and reentrancy patterns has enabled negotiated recoveries or deployment of defensive measures. For USDT and other stablecoins, familiarity with token standards and issuer address practices has aided tracing across chains and wrapped-token ecosystems. Industry Alignment and Preventive Guidance Applied strategies align with cybersecurity and blockchain-forensics best practices: multi-modal evidence collection, preservation of immutable ledger records, and engagement with regulated custodians. The practitioner emphasizes preventive measures—secure key storage, hardware wallets, multi-signature configurations, and user education—which mirror leading cybersecurity recommendations. Collaborative networks with blockchain analytics providers and legal counsel are leveraged to translate technical findings into actionable resolutions. Limitations and Client Guidance Engagements yield faster containment, higher recovery likelihood, and improved post-incident hardening, yet realistic constraints exist: irretrievable private-key loss and laundering through sophisticated mixers or decentralized exchanges may preclude recovery. META TECH RECOVERY PRO communicates these limitations and calibrates client expectations, offering alternative mitigations such as regulatory reporting, insurance-claims assistance, and strategic negotiations with custodial intermediaries. Conclusion META TECH RECOVERY PRO demonstrates technical acumen, methodological discipline, and client-focused professionalism. While acknowledging inherent blockchain-native limitations, the practitioner’s track record, preventive guidance, and adherence to forensic best practices warrant a strong endorsement. Prospective clients seeking a diligent, technically sophisticated, and ethically grounded partner for safeguarding and recovering cryptocurrency assets will find META TECH RECOVERY PRO reliable and effective.

2 months, 2 weeks

The Role of META TECH RECOVERY PRO (MTRP) in Crypto Recovery

by donaldauthur918＠gmail.com

2 months, 2 weeks

Alpha Recovery Experts Crypto Recovery Services reviews

by markstev235＠gmail.com

Recover from cryptocurrency scams with ALPHA RECOVERY EXPERTS. These experts possess specialized knowledge and expertise in dealing with intricate blockchain technology and understanding how scammers operate within the crypto world. ALPHA RECOVERY EXPERTS plays a vital role in restoring trust and confidence in the digital asset space. Through his expertise, technology, and unwavering commitment to client satisfaction, he offers a lifeline to those who have fallen victim to loss or theft to get back their lost funds. For assistance with cryptocurrency recovery, you can reach Alpha Recovery Experts at: Website: alpharecoveryexperts.com Email: Alpharecoveryexpert(a)consultant.com

2 months, 2 weeks

The Most Credible Crypto Recovery Companies HIRE META TECH RECOVERY PRO

by donaldauthur918＠gmail.com

2 months, 2 weeks

Best Cryptocurrency Recovery Company: How HIRE META TECH RECOVERY PRO

by donaldauthur918＠gmail.com

2 months, 2 weeks

Top Best Stock Exchange Scam Recovery Expert In 2026

by codykayson983＠gmail.com

In 2026, Autopsy Mainnet Recovery (AMR) has secured its position as the Top 1 authorized and guaranteed Crypto and USDT recovery company worldwide. Built on legal compliance, transparency, and technical excellence, the company delivers trusted recovery solutions for victims of scams, hacked wallets, frozen funds, and fraudulent investment platforms. Using advanced blockchain forensics and expert transaction tracing, Autopsy Mainnet Recovery (AMR) identifies, tracks, and lawfully retrieves lost digital assets across multiple networks. Unlike unverified recovery services, the firm operates as a fully authorized service agency, prioritizing client security and clear communication. Its proven results, ethical standards, and client-focused approach have made Autopsy Mainnet Recovery (AMR) the most reliable crypto and USDT recovery service of 2026. Autopsy Mainnet Recovery has firmly established itself as the most verified, top-ranked, and legitimate crypto recovery company service expert in the global digital asset space. Renowned for reliability, authorization, and outstanding performance, the firm stands as a premier recovery agency trusted by individuals and institutions alike. Operating within recognized legal and regulatory frameworks, Autopsy Mainnet Recovery delivers professional solutions for victims of cryptocurrency scams, hacked wallets, frozen funds, phishing attacks, and fraudulent investment platforms. Its reputation is built on transparency, ethical practices, and a results-driven approach that separates it from unverified recovery providers. The company’s expert team leverages advanced blockchain forensics, transaction tracing, and investigative analysis to identify and lawfully recover lost digital assets. Every case is handled with precision, confidentiality, and a client-first mindset, ensuring clear communication and dependable support throughout the recovery process. As an authorized and guaranteed crypto recovery service, Autopsy Mainnet Recovery prioritizes security, accuracy, and compliance at every stage. Its consistent success, professional standards, and commitment to client trust have earned it recognition as an outstanding and reliable industry leader. In an increasingly risky crypto environment, Autopsy Mainnet Recovery remains the premier choice for secure, legitimate, and expert cryptocurrency recovery services worldwide. Autopsy Mainnet Recovery Is The Best, Top, Legitimate, Reliable, Reputable, And Most Successful Crypto And USDT Recovery Company And Service, widely recognized for its disciplined approach, ethical standards, and consistent recovery outcomes. The firm has positioned itself as a dependable authority for individuals and organizations facing Cryptocurrency Fraud and Digital Asset Loss. Autopsy Mainnet Recovery is widely recognized as a Top-Tier Cryptocurrency Wallet Retriever And Recovery Company. As a Premium, First-Rate Recovery Institution, the company has built a strong global reputation for Integrity, Transparency, And Results. Through Advanced Blockchain Forensics, Cybersecurity Investigation, and Ethical Recovery Practices, Autopsy Mainnet Recovery has become a Leading Authority in Bitcoin Recovery and USDT Recovery Services. Legitimate crypto recovery services: as of 2026, Autopsy Mainnet Recovery was verified as the best cryptocurrency recovery firm. Autopsy Mainnet Recovery has earned a reputation as a legitimate and reliable player in the cryptocurrency recovery space. Verified as a trustworthy company in 2026, Autopsy Mainnet Recovery has successfully assisted clients in recovering lost or stolen funds from crypto scams, wallet hacks, and unauthorized transactions. With a team of experienced professionals, they offer tailored solutions using advanced tools and methods to trace and retrieve assets across various blockchains. Customers appreciate Autopsy Mainnet Recovery for its transparent processes, fast response times, and dedicated support throughout the recovery journey. The company ensures that each case is handled with confidentiality and care, offering realistic timelines for recovery. Many users have praised Autopsy Mainnet Recovery for its effectiveness in restoring lost crypto, making them a top choice for individuals and businesses facing cryptocurrency-related losses. Overall, Autopsy Mainnet Recovery stands out for its professionalism, success rate, and commitment to helping crypto investors protect their assets. Email: info(a)autopsymainnetsolutions.com Website: https://autospyrec.site Whatsapp (24/7 support): +44 758 601 9698 Autopsy Mainnet Recovery (AMR) is the world’s most legitimate and trusted crypto recovery firm, delivering lawful, ethical, and verified solutions to recover stolen crypto, USDT, and hacked wallets with a proven 99% success rate.

2 months, 2 weeks

TRUSTED BITCOIN RECOVERY EXPERT HIRE ADWARE RECOVERY SPECIALIST

by ireneromeo6611＠gmail.com

After being scammed online, I lost a lot of money—and with it, my trust in anyone promising to help me get it back. I was wary of falling for another trick and wasting what little hope I had left. But after thinking it over, I decided to take a chance on ADWARE RECOVERY SPECIALIST. From the very beginning, I could tell they were different. Instead of rushing me into anything, they listened carefully to my story, double-checked the information I gave them, and clearly explained how they would proceed. Their honesty and calm approach helped me lower my guard. As they worked on my case, they remained focused and professional. They didn’t make a lot of noise, but they made steady progress. They looked into every detail and regularly updated me without overloading me with technical jargon. I never once felt in the dark. In the end, they managed to recover a significant portion of my lost funds. That was a relief, no doubt. But what stayed with me more was the feeling that someone finally had my back. They gave me back a sense of security and peace of mind. I’m grateful for the honesty, dedication, and openness ADWARE RECOVERY SPECIALIST showed throughout the process. If you’ve been a victim of online fraud and are unsure who to trust, my experience is proof that there are real, trustworthy professionals out there. WhatsApp info:+12723 328 343 Email info: Adware recovery specialist @ auctioneer. net

2 months, 2 weeks

BEST TOP 8 CRYPTOCURRENCY RECOVERY SERVICE FOR CRYPTO ASSETS RECOVERY IN 2026

by henrylevi287＠gmail.com

CRYPTO SCAM RECOVERY SERVICE 2026: CHAINX HACKER SOLUTIONS, THE BEST CRYPTO RECOVERY COMPANY Losing cryptocurrency to scams, hardware failures, or lost seed phrases can be a devastating experience, leaving victims feeling helpless and financially vulnerable. In 2026, the rise in sophisticated crypto fraud—such as celebrity investment scams, pig butchering scams, and other investment frauds—has made professional recovery services more critical than ever. ChainX Hacker Solutions (CHS), widely recognized as the best crypto recovery company, offers proven solutions to reclaim lost or stolen digital assets. With a track record of successfully helping hundreds of clients, CHS combines advanced blockchain forensics, global partnerships, and a client-centric approach to deliver results. This guide explores CHS’s industry-leading services, the crypto recovery process, and how to protect your assets from fraud. Why You Need Crypto Recovery Services Cryptocurrency losses can occur due to: • Scams and Fraud: Pig butchering scams, fake ICOs, phishing attacks, and celebrity-endorsed frauds deceive investors into transferring funds. • Lost Access: Forgotten passwords, misplaced seed phrases, or hardware wallet failures lock users out of their accounts. • Hacking: Cybercriminals exploit vulnerabilities in wallets or exchanges to steal assets. • Unauthorized Transactions: Funds are moved without consent, often to decentralized exchanges (DEXs) where scammers convert them to stablecoins like DAI to obscure the trail. The decentralized nature of blockchain makes recovery challenging, as transactions are irreversible and often anonymous. Acting quickly is crucial, as delays allow scammers to move funds, complicating recovery efforts. ChainX Hacker Solutions, the best crypto recovery company, specializes in navigating these complexities to maximize your chances of reclaiming lost assets. ChainX Hacker Solutions: The Best Crypto Recovery Company ChainX Hacker Solutions (CHS), accessible via chainxhacksolution.com/, is the industry leader in crypto scam recovery. Their expertise spans a wide range of cases, from investment fraud to wallet access issues. Here’s why CHS is the best crypto recovery company: • Proven Track Record: CHS has successfully recovered assets for hundreds of clients, with testimonials like Emilly Chershire’s: “Thank you so much! I couldn’t be more appreciative. Just wished there were more genuine and honest companies like yours out there.” • Advanced Technology: CHS uses state-of-the-art blockchain forensics and AI-driven analytics to trace transactions and identify scammers. • Global Partnerships: Collaborations with law enforcement, legal experts, and crypto exchanges worldwide enhance recovery efforts. • Client-Centric Approach: CHS offers transparent communication, free consultations, and comprehensive support to guide victims through the recovery process. Contact CHS at chainxhackersolutions(a)chainx.co.site for a free consultation and start your recovery journey today. The Crypto Recovery Process with CHS ChainX Hacker Solution’s streamlined process ensures efficiency and effectiveness. Here’s a step-by-step breakdown: Step 1: Information Gathering The recovery process begins with collecting detailed information about the incident. Clients provide: • Transaction IDs, wallet addresses, and amounts lost. • Screenshots of scam-related communications (e.g., emails, WhatsApp messages). • Details about the platform, device, or website involved. This data is critical for building a strong case. CHS guides clients to compile comprehensive evidence, ensuring no detail is overlooked. Step 2: Crypto Investigation CHS’s investigative approach sets them apart as the best crypto recovery company. They combine: • Blockchain Forensics: Advanced software traces the path of stolen funds across blockchain networks, even when scammers use DEXs or convert to stablecoins. • Human Expertise: CHS’s analysts meticulously review transaction data to identify perpetrators and their methods. • AI-Powered Analytics: Machine learning algorithms detect patterns of illicit activity, improving the accuracy of fund tracking. This dual approach of technology and human intervention ensures thorough investigations. Step 3: Comprehensive Investigation Report CHS compiles a detailed crypto investigation report, including: • Transaction histories and wallet addresses involved. • Suspected perpetrators’ identities or patterns, if identifiable. • Evidence formatted for law enforcement to expedite action. This report is a powerful tool for approaching authorities, setting CHS’s clients apart from those with limited documentation. As the best crypto recovery company, CHS ensures reports are clear, credible, and actionable. Step 4: Approaching Authorities CHS guides clients on filing claims with law enforcement, such as the FBI’s Internet Crime Complaint Center (IC3) or international cybercrime units. They provide pre-filled forms and detailed instructions to streamline the process. CHS’s partnerships with authorities enhance the likelihood of prompt action, making them the best crypto recovery company for legal coordination. Step 5: Recovery Efforts Once the investigation is complete, CHS pursues multiple recovery avenues: • Negotiating with Exchanges: Coordinating with platforms to freeze or recover funds. • Technical Recovery: Restoring access to locked wallets by recovering lost private keys. • Legal Action: Collaborating with legal experts to pursue perpetrators through civil or criminal proceedings. CHS exhausts every option to maximize recovery success, reinforcing their reputation as the best crypto recovery company. Detecting Crypto Fraud Recognizing a crypto scam early can prevent further losses. Warning signs include: • Unusual Delays or Excuses: Scammers may delay fund releases or demand additional fees. • Unsolicited Offers: Be cautious of unexpected investment opportunities or promises of high returns. • Pressure Tactics: Fraudsters often create urgency to bypass due diligence. If you suspect fraud, consult ChainX Hacker Solutions immediately. Their experts assess the situation and provide clarity, ensuring you don’t fall deeper into a scam. CHS’s proactive approach makes them the best crypto recovery company for early intervention. Why Choose ChainX Hacker Solutions? CHS’s leadership in 2026 is driven by: • Expertise: A team of blockchain analysts, cybersecurity specialists, and legal professionals with extensive experience. • Global Reach: Partnerships with authorities and exchanges worldwide enable effective cross-border recoveries. • Transparency: Clear communication, no hidden fees, and honest assessments of recovery prospects. • Client Success: Testimonials and case studies highlight CHS’s ability to recover significant assets. CHS also offers services beyond crypto scams, including Forex and binary option scam recovery, making them a versatile ally for victims of financial fraud. How to Ensure You’re Hiring a Legitimate Crypto Recovery Service With the rise in crypto scams, secondary frauds posing as recovery services are a concern. To verify a company’s legitimacy: • Check Reviews: Look for verified client testimonials, like those on chainxhacksolution.com/. • Confirm Certifications: Ensure the firm has government or industry accreditations. • Assess Transparency: Legitimate firms provide clear contact details and processes without demanding large upfront fees. • Direct Fund Transfers: Recovered funds should be sent directly to your account. • Avoid Guarantees: Be wary of firms promising guaranteed recovery, as outcomes depend on case complexity. ChainX Hacker Solutions meets all these standards, offering a secure and trustworthy service as the best crypto recovery company. Tips for Preventing Crypto Losses Prevention is key to safeguarding your assets. Follow these best practices: • Secure Private Keys: Store keys offline in hardware wallets like Ledger or Trezor. • Enable 2FA: Add multi-factor authentication to all crypto accounts. • Verify Platforms: Research exchanges and projects to avoid fraudulent schemes. • Regular Backups: Maintain secure, offline backups of seed phrases and keys. • Stay Educated: Keep up with scam tactics and cybersecurity trends. CHS provides educational resources to empower clients, reinforcing their role as the best crypto recovery company. Conclusion: Recover with ChainX Hacker Solutions Crypto scams and losses can be overwhelming, but with ChainX Hacker Solutions, the best crypto recovery company, you have a trusted partner to reclaim your assets. CHS’s advanced forensics, global partnerships, and client-focused approach ensure the highest chances of success. Don’t let a scam define your financial future. Contact CHS at chainxhackersolutions(a)chainx.co.site or visit chainxhacksolution.com/ for a free consultation and start your recovery journey today. With CHS, you can trust in proven, legitimate solutions to secure your digital assets in 2026. Why Crypto Recovery Services Are Essential Cryptocurrencies’ decentralized and pseudonymous nature makes recovery complex. Losses from scams, forgotten seed phrases, or hacked wallets underscore the need for professional services. ChainX Hacker Solutions, the best crypto recovery company, specializes in navigating these challenges, using cutting-edge technology and legal strategies to recover assets and restore financial security. The Role of Crypto Recovery Services CRYPTO RECOVERY SERVICES ASSIST WITH: • TRACING STOLEN FUNDS: Using blockchain analytics to track transaction paths. • RECOVERING ACCESS: Restoring lost private keys or seed phrases. • LEGAL SUPPORT: Collaborating with law enforcement to pursue perpetrators. • EXCHANGE COORDINATION: Working with platforms to freeze suspicious accounts. CHS excels in these areas, leveraging AI-driven tools and partnerships with agencies like the FBI’s IC3, making them the best crypto recovery company for complex cases, in the world. Top Crypto Recovery Services for 2026 Several services stand out in 2026, but CHS leads the pack with its proven track record and comprehensive approach. ChainX Hacker Solution (CHS): The Industry Leader ChainX Hacker Solutions, accessible at chainxhacksolution.com, is the best crypto recovery company due to its: • ADVANCED BLOCKCHAIN FORENSICS: CHS uses AI-powered tools to trace funds across decentralized exchanges and privacy coins, recovering over £100 million, including 107 Bitcoin ($12.6 million) in one case. • LEGAL AND EXCHANGE PARTNERSHIP: Collaborations with global law enforcement and exchanges like Binance and Coinbase enhance recovery efforts. • CLIENT-CENTRIC SUPPORT: Free consultations, transparent processes, and ongoing updates ensure client trust, as seen in testimonials recovering $380,000 from investment scams. • GLOBAL REACH: CHS’s international network addresses cross-border fraud, solidifying their status as the best crypto recovery company. Other Notable Services • CRYPTO ASSET RECOVERY: Specializes in recovering lost seed phrases and inaccessible wallets, with a strong focus on technical expertise. • WALLET RECOVERY SERVICE: Focuses on restoring access to crypto wallets, excelling in private key recovery for complex cases. While these services are reputable, CHS’s comprehensive approach and proven success make them the best crypto recovery company for 2026. CHS’s Recovery Process: What to Expect ChainX Hacker Solutions follows a structured, transparent process to reclaim your assets, reinforcing their position as the best crypto recovery company: 9. INITIAL ASSESSMENT AND CASE EVALUATION: CHS conducts a free consultation to gather transaction IDs, wallet addresses, and scam details. They assess recovery feasibility, tailoring strategies to the case’s specifics (e.g., phishing, Ponzi scheme, or hardware failure). 10. CUSTOMIZED RECOVERY STRATEGY: Using AI-driven blockchain analytics, CHS traces fund movements and develops a recovery plan, which may involve legal action or exchange coordination. 11. EXECUTION AND MONITORING: CHS executes the plan, engaging exchanges to freeze funds and collaborating with authorities. Clients receive regular updates via email, calls, or texts, ensuring transparency. 12. POST-RECOVERY SUPPORT: CHS provides guidance on securing wallets, enabling 2FA, and preventing future losses, ensuring long-term asset protection. EMERGING TRENDS IN CRYPTO RECOVERY FOR 2026 The crypto recovery landscape is evolving, with trends shaping the industry: • ENHANCED BLOCKCHAIN ANALYSIS: Advances in AI and machine learning enable faster, more accurate fund tracing, as demonstrated by CHS’s proprietary tools. • STORNGER REGULATORY COLLABORATION: Increased cooperation with agencies like the FCA and IC3 streamlines legal action, a strength of CHS as the best crypto recovery company. • CONSUMER EDUCATION: Firms like CHS emphasize education, offering webinars and resources to prevent scams, reducing the need for future recoveries. Preventing Crypto Losses Prevention is key to safeguarding assets. Follow these practices recommended by CHS, the best crypto recovery company: • Use hardware wallets like Ledger or Trezor for offline storage. • Enable multi-factor authentication (MFA) on all accounts. • Verify platforms using CHS’s scam database and community feedback on X. • Stay informed about scam tactics through CHS’s educational materials. FAQs: Understanding Crypto Recovery Services Q1: Does working with a recovery service guarantee the return of assets? A1: No, recovery is not guaranteed due to blockchain’s complexity. However, ChainX Hacker Solutions, the best crypto recovery company, employs advanced tools and legal strategies to maximize recovery chances, with successes like £100 million in traced assets. Q2: What types of situations do recovery services help with? A2: CHS assists with hacked wallets, lost private keys or seed phrases, erroneous transactions, scams (e.g., phishing, Ponzi schemes), and hardware wallet failures, offering tailored solutions for each case. Q3: How long does it take to recover crypto assets? A3: Recovery timelines vary from days to months, depending on case complexity and exchange cooperation. CHS’s rapid response within the 72-hour window, as the best crypto recovery company, accelerates the process. Q4: What are the costs associated with crypto recovery services? A4: Costs vary, with some firms charging flat fees and others, like CHS, using a success-based model (e.g., a percentage of recovered assets). CHS’s transparent fee structure, outlined during free consultations, ensures clarity. Always verify terms before proceeding. SECURE YOUR CRYPTO FUTURE WITH CHAINX HACKER SOLUTIONS In 2026, crypto recovery services are vital for reclaiming lost or stolen assets. ChainX Hacker Solutions, the best crypto recovery company, leads the industry with its advanced forensics, global partnerships, and client-focused approach. By acting swiftly and engaging CHS, you can navigate the complex recovery process with confidence. Don’t let a scam define your financial future—take action today

2 months, 2 weeks

← Newer
1
...
7
8
9
10
11
12
13
...
3411
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

Lkft-triage