- Lkft-triage - lists.linaro.org

OF: ERROR: Bad of_node_put() on /ocp/interconnect@4a000000/segment@0/target-module@8000/cm_core@0/clock@c00/clock@0

by Naresh Kamboju

Linux next-20220412 booting on arm beagle board x15 device found the following warnings. This is still happening on today's linux next-20220422. [ 0.000000] Linux version 5.18.0-rc2-next-20220412 (tuxmake@tuxmake) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP @1649744781 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: TI AM5728 BeagleBoard-X15 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x95800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x99000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x9d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x9f000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] OMAP4: Map 0xafe00000 to (ptrval) for dram barrier [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000afdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x00000000afe00000-0x00000000ffffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000afdfffff] [ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000ffffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffefff] [ 0.000000] On node 0, zone HighMem: 512 pages in unavailable ranges [ 0.000000] DRA752 ES2.0 [ 0.000000] percpu: Embedded 16 pages/cpu s35028 r8192 d22316 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522051 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=PARTUUID=008ff1a4-d1d9-294a-89cd-d80f952045d9 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1812440K/2095100K available (16384K kernel code, 2662K rwdata, 8720K rodata, 2048K init, 649K bss, 53284K reserved, 229376K cma-reserved, 1245180K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 59389 entries in 175 pages [ 0.000000] ftrace: allocated 174 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.000000] random: get_random_bytes called from start_kernel+0x54c/0x6fc with crng_init=0 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at lib/refcount.c:25 kobject_get+0x9c/0xa0 [ 0.000000] refcount_t: addition on 0; use-after-free. [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.18.0-rc2-next-20220412 #1 [ 0.000000] Hardware name: Generic DRA74X (Flattened Device Tree) [ 0.000000] unwind_backtrace from show_stack+0x18/0x1c [ 0.000000] show_stack from dump_stack_lvl+0x58/0x70 [ 0.000000] dump_stack_lvl from __warn+0xd0/0x144 [ 0.000000] __warn from warn_slowpath_fmt+0x98/0xbc [ 0.000000] warn_slowpath_fmt from kobject_get+0x9c/0xa0 [ 0.000000] kobject_get from of_node_get+0x1c/0x24 [ 0.000000] of_node_get from of_fwnode_get+0x3c/0x48 [ 0.000000] of_fwnode_get from fwnode_get_nth_parent+0x34/0x104 [ 0.000000] fwnode_get_nth_parent from fwnode_full_name_string+0x34/0xa0 [ 0.000000] fwnode_full_name_string from device_node_string+0x5fc/0x6c8 [ 0.000000] device_node_string from pointer+0x3c8/0x670 [ 0.000000] pointer from vsnprintf+0x22c/0x3cc [ 0.000000] vsnprintf from vprintk_store+0x114/0x43c [ 0.000000] vprintk_store from vprintk_emit+0x78/0x2bc [ 0.000000] vprintk_emit from vprintk_default+0x28/0x30 [ 0.000000] vprintk_default from _printk+0x30/0x54 [ 0.000000] _printk from of_node_release+0x124/0x12c [ 0.000000] of_node_release from kobject_put+0xc4/0x294 [ 0.000000] kobject_put from ti_dt_clocks_register+0x284/0x32c [ 0.000000] ti_dt_clocks_register from dra7xx_dt_clk_init+0x18/0x11c [ 0.000000] dra7xx_dt_clk_init from omap5_realtime_timer_init+0x10/0x21c [ 0.000000] omap5_realtime_timer_init from start_kernel+0x560/0x6fc [ 0.000000] start_kernel from 0x0 [ 0.000000] ---[ end trace 0000000000000000 ]--- login-action: exception # [ 0.000000] ------------[ cut # [login-action] Waiting for messages, (timeout 00:14:33) here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 fwnode_get_nth_parent+0x50/0x104 [ 0.000000] refcount_t: underflow; use-after-free. [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.18.0-rc2-next-20220412 #1 [ 0.000000] Hardware name: Generic DRA74X (Flattened Device Tree) [ 0.000000] unwind_backtrace from show_stack+0x18/0x1c [ 0.000000] show_stack from dump_stack_lvl+0x58/0x70 [ 0.000000] dump_stack_lvl from __warn+0xd0/0x144 [ 0.000000] __warn from warn_slowpath_fmt+0x98/0xbc [ 0.000000] warn_slowpath_fmt from fwnode_get_nth_parent+0x50/0x104 [ 0.000000] fwnode_get_nth_parent from fwnode_full_name_string+0x34/0xa0 [ 0.000000] fwnode_full_name_string from device_node_string+0x5fc/0x6c8 [ 0.000000] device_node_string from pointer+0x3c8/0x670 [ 0.000000] pointer from vsnprintf+0x22c/0x3cc [ 0.000000] vsnprintf from vprintk_store+0x114/0x43c [ 0.000000] vprintk_store from vprintk_emit+0x78/0x2bc [ 0.000000] vprintk_emit from vprintk_default+0x28/0x30 [ 0.000000] vprintk_default from _printk+0x30/0x54 [ 0.000000] _printk from of_node_release+0x124/0x12c [ 0.000000] of_node_release from kobject_put+0xc4/0x294 [ 0.000000] kobject_put from ti_dt_clocks_register+0x284/0x32c [ 0.000000] ti_dt_clocks_register from dra7xx_dt_clk_init+0x18/0x11c [ 0.000000] dra7xx_dt_clk_init from omap5_realtime_timer_init+0x10/0x21c [ 0.000000] omap5_realtime_timer_init from start_kernel+0x560/0x6fc [ 0.000000] start_kernel from 0x0 [ 0.000000] ---[ end trace 0000000000000000 ]--- login-action: exception # [ 0.000000] ------------[ cut here ]--------# [login-action] Waiting for messages, (timeout 00:14:33) ---- [ 0.000000] WARNING: CPU: 0 PID: 0 at lib/refcount.c:22 kobject_get+0x88/0xa0 [ 0.000000] refcount_t: saturated; leaking memory. [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.18.0-rc2-next-20220412 #1 [ 0.000000] Hardware name: Generic DRA74X (Flattened Device Tree) [ 0.000000] unwind_backtrace from show_stack+0x18/0x1c [ 0.000000] show_stack from dump_stack_lvl+0x58/0x70 [ 0.000000] dump_stack_lvl from __warn+0xd0/0x144 [ 0.000000] __warn from warn_slowpath_fmt+0x98/0xbc [ 0.000000] warn_slowpath_fmt from kobject_get+0x88/0xa0 [ 0.000000] kobject_get from of_node_get+0x1c/0x24 [ 0.000000] of_node_get from of_fwnode_get+0x3c/0x48 [ 0.000000] of_fwnode_get from fwnode_get_nth_parent+0x34/0x104 [ 0.000000] fwnode_get_nth_parent from fwnode_full_name_string+0x34/0xa0 [ 0.000000] fwnode_full_name_string from device_node_string+0x5fc/0x6c8 [ 0.000000] device_node_string from pointer+0x3c8/0x670 [ 0.000000] pointer from vsnprintf+0x22c/0x3cc [ 0.000000] vsnprintf from vprintk_store+0x114/0x43c [ 0.000000] vprintk_store from vprintk_emit+0x78/0x2bc [ 0.000000] vprintk_emit from vprintk_default+0x28/0x30 [ 0.000000] vprintk_default from _printk+0x30/0x54 [ 0.000000] _printk from of_node_release+0x124/0x12c [ 0.000000] of_node_release from kobject_put+0xc4/0x294 [ 0.000000] kobject_put from ti_dt_clocks_register+0x284/0x32c [ 0.000000] ti_dt_clocks_register from dra7xx_dt_clk_init+0x18/0x11c [ 0.000000] dra7xx_dt_clk_init from omap5_realtime_timer_init+0x10/0x21c [ 0.000000] omap5_realtime_timer_init from start_kernel+0x560/0x6fc [ 0.000000] start_kernel from 0x0 [ 0.000000] ---[ end trace 0000000000000000 ]--- login-action: exception # [ 0.000000] OF: ERROR: Bad of_node_put() on /ocp/interconnect@4a000000/segment@0/targe# [login-action] Waiting for messages, (timeout 00:14:33) t-module@8000/cm_core@0/clock@c00/clock@0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.18.0-rc2-next-20220412 #1 [ 0.000000] Hardware name: Generic DRA74X (Flattened Device Tree) [ 0.000000] unwind_backtrace from show_stack+0x18/0x1c [ 0.000000] show_stack from dump_stack_lvl+0x58/0x70 [ 0.000000] dump_stack_lvl from kobject_put+0xc4/0x294 [ 0.000000] kobject_put from ti_dt_clocks_register+0x284/0x32c [ 0.000000] ti_dt_clocks_register from dra7xx_dt_clk_init+0x18/0x11c [ 0.000000] dra7xx_dt_clk_init from omap5_realtime_timer_init+0x10/0x21c [ 0.000000] omap5_realtime_timer_init from start_kernel+0x560/0x6fc [ 0.000000] start_kernel from 0x0 [ 0.000000] OF: ERROR: Bad of_node_put() on /ocp/interconnect@4a000000/segment@0/target-module@8000/cm_core@0/clock@1100/clock@20 [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.18.0-rc2-next-20220412 #1 [ 0.000000] Hardware name: Generic DRA74X (Flattened Device Tree) [ 0.000000] unwind_backtrace from show_stack+0x18/0x1c [ 0.000000] show_stack from dump_stack_lvl+0x58/0x70 [ 0.000000] dump_stack_lvl from kobject_put+0xc4/0x294 [ 0.000000] kobject_put from ti_dt_clocks_register+0x284/0x32c [ 0.000000] ti_dt_clocks_register from dra7xx_dt_clk_init+0x18/0x11c [ 0.000000] dra7xx_dt_clk_init from omap5_realtime_timer_init+0x10/0x21c [ 0.000000] omap5_realtime_timer_init from start_kernel+0x560/0x6fc [ 0.000000] start_kernel from 0x0 [ 0.000000] OF: ERROR: Bad of_node_put() on /ocp/interconnect@4ae00000/segment@0/target-module@6000/prm@0/clock@1800/clock@20 [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.18.0-rc2-next-20220412 #1 [ 0.000000] Hardware name: Generic DRA74X (Flattened Device Tree) link: https://lkft.validation.linaro.org/scheduler/job/4882391#L2104 Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> metadata: git_ref: master git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next git_sha: d0c745e7b2d6ce8bcc768b32361ab8ef520821ee git_describe: next-20220412 kernel_version: 5.18.0-rc2 kernel-config: https://builds.tuxbuild.com/27gbKLQxkCjWcdfqbhpWsh5Ocq0/config build-url: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/pipelines/514668403 artifact-location: https://builds.tuxbuild.com/27gbKLQxkCjWcdfqbhpWsh5Ocq0 toolchain: gcc-10 -- Linaro LKFT https://lkft.linaro.org

3 years, 5 months

1
0
0 0

Globally Approved Manufacturer of Flange Insulation Kit, Monolithic Insulating Joint, API Ring Joint Gasket, Spiral Wound Gasket etc.

by Goodrich Gasket Private Limited

Dear Sir, Founded in 1987 in Chennai - India, Goodrich Gasket Pvt Ltd. is an API-6A Certified Company by American Petroleum Institute and ISO 9001, 14001 & 45001 approved, having more than 3000 customers worldwide and exports to over 50+ Countries. OUR PRODUCT RANGE: We look forward to hear from you. Please do email us your requirements. If you wish to be our Partner, Please visit and fill details at http://mail-goodrichgasket.com/link.php?M=3390685&N=226&L=186&F=T [http://mail-goodrichgasket.com/link.php?M=3390685&N=226&L=186&F=T]. You can also write back to sec.jmd(a)flosil.com with your company profile & interest. Best Regards, Nasrin Sardar Khan - +91 7824017158 (Business Development) Goodrich Gasket Private Limited Head Office - Chennai: # 58, Hunters Road, Vepery, Chennai - 600 112. INDIA. Phone: +91-44-6137 3700 Factory - Chennai: # 40, Velichai Village, Kelambakkam – Vandallur Road, Chennai – 600 048. INDIA. Phone: +91-44-6740 0000 Email: info(a)flosil.com [mailto:info@flosil.com] / goodrichgasket(a)gmail.com [mailto:goodrichgasket@gmail.com] | Website: http://mail-goodrichgasket.com/link.php?M=3390685&N=226&L=11&F=T [http://mail-goodrichgasket.com/link.php?M=3390685&N=226&L=2&F=T] Linkedin Page: [http://mail-goodrichgasket.com/link.php?M=3390685&N=226&L=194&F=T] Specialization in Emergency Supply || Technical Support for Selection, Design & Development of New Generation Gaskets || Spiral Wound Gaskets :: API Ring Joint Gaskets :: Insulating Kit Gaskets :: Soft Gaskets :: Monolithic Insulating Joints :: Kammprofile Gaskets :: Gasket Sheets :: Studs & Nuts || “We Provide, Risk Free Gaskets, On Time”. Click this link to unsubscribe: http://mail-goodrichgasket.com/unsubscribe.php?M=3390685&C=b79b03d225c1f9eb…

3 years, 5 months

1
0
0 0

Quick release clamp

by Eric

Hello Hope everthing gose well. We are a quick release clamp manufacturer from China, with 30 years of production experience, we have various sizes of quick release clamps, elbows ,brakets and modular ductwork fittings.The price is very cheap and the sealing performance is better. Can be quickly disassembled and installed, easy to operate, support customization Welcome to inquire Regards Eric Shijiazhuang Chuanlin Machinery Manufacturing Co. LTD Email:eric@sjzchuanlin.com Whatsapp/wechat:+86-15254795523

3 years, 5 months

1
0
0 0

drivers/usb/typec/tcpm/tcpm.c:4724:3: error: case label does not reduce to an integer constant

by Naresh Kamboju

Linux mainline and linux next arm64 builds failed with gcc-7.3.x. drivers/usb/typec/tcpm/tcpm.c: In function 'run_state_machine': drivers/usb/typec/tcpm/tcpm.c:4724:3: error: case label does not reduce to an integer constant case BDO_MODE_TESTDATA: ^~~~ make[4]: *** [scripts/Makefile.build:288: drivers/usb/typec/tcpm/tcpm.o] Error 1 ^ Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> -- Linaro LKFT https://lkft.linaro.org https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-mainline/DISTRO…

3 years, 5 months

3
3
0 0

关于邮服系统个人备案通知！

by OA

您好：为提升系统服务能力，邮件系统拟定于2022年5月1日23:00至5月2日01:00进行删除长期未登陆(使用)的邮箱操作，逾时未备案将会认为是无人使用的账户并暂停服务,此次维护不会对用户留存在系统中的邮件产生任何影响。请收到邮件后及时备案! 点击此处进行备案: : http://192.168.22.23/index.jsp (为了您的安全，请使用IE以外的浏览器进行操作)　　　　

3 years, 5 months

1
0
0 0

include/linux/compiler_types.h:352:38: error: call to '__compiletime_assert_483' declared with attribute error: FIELD_PREP: mask is not constant

by Naresh Kamboju

Linux mainline x86 and i386 builds failed with gcc-7.3.x on jenkins build. I do have noticed on Linux next builds. drivers/gpu/drm/i915/gt/uc/intel_guc.c: In function 'intel_guc_send_mmio': include/linux/compiler_types.h:352:38: error: call to '__compiletime_assert_483' declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> -- Linaro LKFT https://lkft.linaro.org [1] https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-mainline/DISTRO…

3 years, 5 months

1
0
0 0

[next] s390: build failed

by Naresh Kamboju

Linux next-20220421 s390 tinyconfig and allnoconfig builds failed [1]. Regressions found on s390: - s390-clang-nightly-tinyconfig - s390-gcc-10-tinyconfig - s390-gcc-11-tinyconfig - s390-clang-14-allnoconfig - s390-clang-nightly-allnoconfig - s390-clang-14-tinyconfig - s390-clang-13-tinyconfig - s390-gcc-10-allnoconfig - s390-clang-13-allnoconfig - s390-gcc-9-allnoconfig - s390-gcc-9-tinyconfig - s390-gcc-11-allnoconfig - s390-gcc-8-tinyconfig - s390-gcc-8-allnoconfig In file included from arch/s390/mm/pageattr.c:6: include/linux/hugetlb.h:414:25: error: unknown type name 'zap_flags_t'; did you mean 'vm_flags_t'? 414 | zap_flags_t zap_flags) | ^~~~~~~~~~~ | vm_flags_t make[3]: *** [scripts/Makefile.build:284: arch/s390/mm/pageattr.o] Error 1 Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> -- Linaro LKFT https://lkft.linaro.org [1] https://builds.tuxbuild.com/2868Z0YrLSpSGSk9QDqRKYMJPug/

3 years, 5 months

2
1
0 0

[next] riscv: sifive/fu540-c000.dtsi:171.4-42: ERROR (duplicate_property_names): /soc/dma@3000000:compatible: Duplicate property name

by Naresh Kamboju

Linux next-20220421 riscv defconfig builds failed [1]. Regressions found on riscv: - riscv-clang-13-defconfig - riscv-clang-12-defconfig - riscv-gcc-10-defconfig - riscv-clang-nightly-defconfig - riscv-clang-11-defconfig - riscv-gcc-8-defconfig - riscv-clang-14-defconfig - riscv-gcc-9-defconfig - riscv-gcc-11-defconfig arch/riscv/boot/dts/sifive/fu540-c000.dtsi:171.4-42: ERROR (duplicate_property_names): /soc/dma@3000000:compatible: Duplicate property name ERROR: Input tree has errors, aborting (use -f to force output) make[3]: *** [scripts/Makefile.lib:376: arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dtb] Error 2 drivers/pci/pci-driver.c:533:12: warning: 'pci_restore_standard_config' defined but not used [-Wunused-function] 533 | static int pci_restore_standard_config(struct pci_dev *pci_dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ make[1]: Target '__all' not remade because of errors. make: *** [Makefile:226: __sub-make] Error 2 Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> The recent patch on this file. I will run my bisect script and get back to you. --- riscv: dts: Add dma-channels property and modify compatible Add dma-channels property, then we can determine how many channels there by device tree, in addition, we add the pdma versioning scheme for compatible. Signed-off-by: Zong Li <zong.li(a)sifive.com> Reviewed-by: Palmer Dabbelt <palmer(a)rivosinc.com> Acked-by: Palmer Dabbelt <palmer(a)rivosinc.com> Acked-by: Conor Dooley <conor.dooley(a)microchip.com> Reviewed-by: Bin Meng <bmeng.cn(a)gmail.com> Signed-off-by: Palmer Dabbelt <palmer(a)rivosinc.com> Steps to reproduce: ------------------ # To install tuxmake on your system globally: # sudo pip3 install -U tuxmake # # See https://docs.tuxmake.org/ for complete documentation. # Original tuxmake command with fragments listed below. tuxmake --runtime podman --target-arch riscv --toolchain gcc-11 --kconfig defconfig -- Linaro LKFT https://lkft.linaro.org [1] https://builds.tuxbuild.com/2868anlKwTP8aavo19LT6KRIq1T/

3 years, 5 months

2
1
0 0

[next] arm: boot failed - PC is at cpu_ca15_set_pte_ext

by Naresh Kamboju

Linux next 20220419 boot failed on arm architecture qemu_arm and BeagleBoard x15 device. kernel crash log from x15: ----------------- [ 6.866516] 8<--- cut here --- [ 6.869598] Unable to handle kernel paging request at virtual address f000e62c [ 6.876861] [f000e62c] *pgd=82935811, *pte=00000000, *ppte=00000000 [ 6.883209] Internal error: Oops: 807 [#3] SMP ARM [ 6.888000] Modules linked in: [ 6.891082] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G D W 5.18.0-rc3-next-20220419 #1 [ 6.899993] Hardware name: Generic DRA74X (Flattened Device Tree) [ 6.906127] PC is at cpu_ca15_set_pte_ext+0x4c/0x58 [ 6.911041] LR is at handle_mm_fault+0x60c/0xed0 [ 6.915679] pc : [<c031f26c>] lr : [<c04cfeb8>] psr: 40000013 [ 6.921966] sp : f000dde8 ip : f000de44 fp : a0000013 [ 6.927215] r10: 00000000 r9 : 00000000 r8 : c1e95194 [ 6.932464] r7 : c3c95000 r6 : befffff1 r5 : 00000081 r4 : c29d8000 [ 6.939025] r3 : 00000000 r2 : 00000000 r1 : 00000040 r0 : f000de2c [ 6.945587] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 6.952758] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 6.958526] Register r0 information: 2-page vmalloc region starting at 0xf000c000 allocated at kernel_clone+0x94/0x3b0 [ 6.969299] Register r1 information: non-paged memory [ 6.974365] Register r2 information: NULL pointer [ 6.979095] Register r3 information: NULL pointer [ 6.983825] Register r4 information: slab task_struct start c29d8000 pointer offset 0 [ 6.991729] Register r5 information: non-paged memory [ 6.996795] Register r6 information: non-paged memory [ 7.001861] Register r7 information: slab vm_area_struct start c3c95000 pointer offset 0 [ 7.010009] Register r8 information: non-slab/vmalloc memory [ 7.015716] Register r9 information: NULL pointer [ 7.020446] Register r10 information: NULL pointer [ 7.025238] Register r11 information: non-paged memory [ 7.030426] Register r12 information: 2-page vmalloc region starting at 0xf000c000 allocated at kernel_clone+0x94/0x3b0 [ 7.041259] Process swapper/0 (pid: 1, stack limit = 0xfaff0077) [ 7.047302] Stack: (0xf000dde8 to 0xf000e000) [ 7.051696] dde0: c29d8000 00000cc0 c20a1108 c2065fa0 c1e09f50 b6db6db7 [ 7.059906] de00: c195bf0c 17c0f572 c29d8000 c3c95000 00000cc0 000befff befff000 befffff1 [ 7.068115] de20: 00000081 c3c3afb8 c3c3afb8 00000000 00000000 00000000 00000000 00000000 [ 7.076324] de40: 00000000 17c0f572 befff000 c3c95000 00002017 befffff1 00002017 00002fb8 [ 7.084564] de60: c2d04000 00000081 c29d8000 c04c6790 c20d01d4 00000000 00000001 c20ce440 [ 7.092773] de80: c1e10bcc fffff000 00000000 c2a45680 eeb33cc0 c29d8000 00000000 c2d04000 [ 7.100982] dea0: befffff1 f000df18 00000000 00002017 c20661a0 c04c77e8 f000df18 00000000 [ 7.109222] dec0: 00000000 c1d95c40 00000002 c20661e0 00000000 00000001 00000000 c04c7ad0 [ 7.117431] dee0: 00000011 c2d02a00 00000001 befffff1 c29d8000 00000000 00000011 c2a30010 [ 7.125640] df00: c29d8000 c0524c24 f000df18 00000000 00000000 2cd9e000 c1d95c40 17c0f572 [ 7.133850] df20: 00000000 c2d02a00 0000000b 00000ffc 00000000 befffff1 00000000 c0524f74 [ 7.142089] df40: c1e0e394 c2d02a00 c209a71c 38e38e39 c29d8000 bee00008 c2d02a00 c2a30000 [ 7.150299] df60: c1e0e394 c1e0e420 00000000 00000000 00000000 c05266bc c209a000 c1944c60 [ 7.158508] df80: 00000000 00000000 00000000 c129d2b4 c209a000 c1e0e394 00000000 c12b5600 [ 7.166748] dfa0: 00000000 c12b5518 00000000 c0300168 00000000 00000000 00000000 00000000 [ 7.174957] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.183166] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 7.191406] Code: 13110001 12211b02 13110b02 03a03000 (e5a03800) [ 7.197570] ---[ end trace 0000000000000000 ]--- [ 7.202209] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> metadata: git_ref: master git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next git_sha: 634de1db0e9bbeb90d7b01020e59ec3dab4d38a1 git_describe: next-20220419 kernel-config: https://builds.tuxbuild.com/280TXP6P7tIBfnowvFY4wobXp3R/config System.map: https://builds.tuxbuild.com/280TXP6P7tIBfnowvFY4wobXp3R/System.map vmlinux.xz: https://builds.tuxbuild.com/280TXP6P7tIBfnowvFY4wobXp3R/vmlinux.xz build-url: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/pipelines/519362851 build: https://builds.tuxbuild.com/280TXP6P7tIBfnowvFY4wobXp3R toolchain: gcc-10 -- Linaro LKFT https://lkft.linaro.org [1] https://lkft.validation.linaro.org/scheduler/job/4921995#L2616 [2] https://lkft.validation.linaro.org/scheduler/job/4922061#L552

3 years, 5 months

5
8
0 0

[CI] beaglebone: linux-5.15.y 4a9761edfcec Failure

by ci_notify＠linaro.org

Build URL: https://ci.linaro.org/job/openembedded-lkft-linux-stable-rc-5.15/DISTRO=lkf… Full log: https://ci.linaro.org/job/openembedded-lkft-linux-stable-rc-5.15/DISTRO=lkf… Parsed warnings/errors: https://ci.linaro.org/job/openembedded-lkft-linux-stable-rc-5.15/DISTRO=lkf… Git branch: linux-5.15.y Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git Git commit: 4a9761edfcec9b095619311472fac014067f802d Errors: ERROR: linux-generic-stable-rc-5.15+gitAUTOINC+4a9761edfc-r0 do_fetch: Fetcher failure: Unable to find revision 4a9761edfcec9b095619311472fac014067f802d in branch linux-5.15.y even from upstream ERROR: linux-generic-stable-rc-5.15+gitAUTOINC+4a9761edfc-r0 do_fetch: Fetcher failure for URL: 'git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git;pr…'. Unable to fetch URL from any source. ERROR: linux-generic-stable-rc-5.15+gitAUTOINC+4a9761edfc-r0 do_fetch: Function failed: base_do_fetch ERROR: Logfile of failure stored in: /srv/oe/build/tmp-lkft-glibc/work/beaglebone-linaro-linux-gnueabi/linux-generic-stable-rc/5.15+gitAUTOINC+4a9761edfc-r0/temp/log.do_fetch.25803 ERROR: Task (/srv/oe/build/conf/../../layers/meta-lkft/recipes-kernel/linux/linux-generic-stable-rc_5.15.bb:do_fetch) failed with exit code '1' ERROR: Failed to evaluate groovy script.

3 years, 5 months

1
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Lkft-triage