- Lkft-triage - lists.linaro.org

by lkft＠linaro.org

## Build * kernel: 5.17.15 * git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc * git branch: linux-5.17.y * git commit: eed68052d2016d9f96d6656435099762608120e3 * git describe: 1f2208c * test details: https://qa-reports.linaro.org/lkft/ltp/build/1f2208c ## Test Regressions (compared to 9fb2800) No test regressions found. ## Metric Regressions (compared to 9fb2800) No metric regressions found. Tested-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Test Fixes (compared to 9fb2800) No test fixes found. ## Metric Fixes (compared to 9fb2800) No metric fixes found. ## Test result summary total: 12654, pass: 10651, fail: 64, skip: 1939, xfail: 0 ## Build Summary ## Test suites summary * log-parser-boot * log-parser-test * ltp-cap_bounds * ltp-commands * ltp-containers * ltp-controllers * ltp-cpuhotplug * ltp-crypto * ltp-cve * ltp-dio * ltp-fcntl-locktests * ltp-filecaps * ltp-fs * ltp-fs_bind * ltp-fs_perms_simple * ltp-fsx * ltp-hugetlb * ltp-io * ltp-ipc * ltp-math * ltp-mm * ltp-nptl * ltp-pty * ltp-sched * ltp-securebits * ltp-syscalls * ltp-tracing -- Linaro LKFT https://lkft.linaro.org

3 years, 2 months

1
0
0 0

5.19.0-rc5 : Raspberry Pi 4 : Unable to handle kernel paging request at virtual address

by Naresh Kamboju

While running LTP controllers tests on arm64 Raspberry Pi 4 Model B the following kernel crash noticed. Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> metadata: git_ref: master git_repo: https://gitlab.com/Linaro/lkft/mirrors/torvalds/linux-mainline git_sha: 88084a3df1672e131ddc1b4e39eeacfd39864acf kernel_version: 5.19.0-rc5 kernel-config: https://builds.tuxbuild.com/2BSEyt8Sb19HSj6SnBFiMo6kiQh/config build-url: https://gitlab.com/Linaro/lkft/mirrors/torvalds/linux-mainline/-/pipelines/… artifact-location: https://builds.tuxbuild.com/2BSEyt8Sb19HSj6SnBFiMo6kiQh vmlinux.xz: https://builds.tuxbuild.com/2BSEyt8Sb19HSj6SnBFiMo6kiQh/vmlinux.xz System.map: https://builds.tuxbuild.com/2BSEyt8Sb19HSj6SnBFiMo6kiQh/System.map toolchain: gcc-11 Steps to reproduce: ------------------- ./runltp -p -q -f controllers Test log: ---------- cgroup_fj_stress_blkio_4_4_each 1 TPASS: All done! cgroup_fj_stress_blkio_4_4_each 2 TINFO: Removing all ltp subgroups... cgroup_fj_stress_blkio_2_9_each 1 TINFO: Subsystem blkio is mounted at /sys/fs/cgroup/blkio cgroup_fj_stress_blkio_2_9_each 1 TINFO: Creating subgroups ... [ 2414.973441] Unable to handle kernel paging request at virtual address 00620000090336a0 [ 2414.981581] Mem abort info: [ 2414.984480] ESR = 0x0000000086000004 [ 2414.988323] EC = 0x21: IABT (current EL), IL = 32 bits [ 2414.993765] SET = 0, FnV = 0 [ 2414.996905] EA = 0, S1PTW = 0 [ 2415.000124] FSC = 0x04: level 0 translation fault [ 2415.005118] [00620000090336a0] address between user and kernel address ranges [ 2415.012393] Internal error: Oops: 86000004 [#1] PREEMPT SMP [ 2415.018048] Modules linked in: btrfs blake2b_generic libcrc32c raid6_pq zstd_compress xhci_pci snd_soc_hdmi_codec xhci_pci_renesas raspberrypi_cpufreq hci_uart btqca brcmfmac brcmutil btbcm vc4 bluetooth cfg80211 cec drm_display_helper drm_cma_helper rfkill clk_raspberrypi reset_raspberrypi drm_kms_helper crct10dif_ce raspberrypi_hwmon drm i2c_bcm2835 iproc_rng200 rng_core pwm_bcm2835 bcm2711_thermal pcie_brcmstb fuse [ 2415.055725] CPU: 0 PID: 11626 Comm: cgroup_fj_stres Not taintedlinu#1 [ 2415.062965] Hardware name: Raspberry Pi 4 Model B (DT) [ 2415.068175] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2415.075238] pc : 0x620000090336a0 [ 2415.078600] lr : ktime_get+0x50/0xac [ 2415.082228] sp : ffff80000dfdbb90 [ 2415.085585] x29: ffff80000dfdbb90 x28: 00000000ffffffff x27: ffff00006405e580 [ 2415.092832] x26: ffff00006405e748 x25: 0000000001200000 x24: ffff00006405e180 [ 2415.100076] x23: ffff80000dfdbd68 x22: 0000000000000000 x21: 000002321545f201 [ 2415.107320] x20: 000000000012017e x19: ffff80000ae3b440 x18: ffff000000000000 [ 2415.114564] x17: 0000000000000000 x16: 0000000000000000 x15: 00000000000000dc [ 2415.121809] x14: 0000000001200011 x13: 0000000060000000 x12: 0000ffffa7b6c1e8 [ 2415.129052] x11: 0000000000000040 x10: ffff80000a96c5c0 x9 : ffff8000080990d4 [ 2415.136295] x8 : 0000000000000000 x7 : 0000000000a9c84a x6 : 4480001ec1769752 [ 2415.143538] x5 : 00ffbffeffffffff x4 : 0000000900000000 x3 : 0000000000000000 [ 2415.150781] x2 : ffff80000a94e000 x1 : ffff8000090336a0 x0 : ffff80000ad102f0 [ 2415.158025] Call trace: [ 2415.160498] 0x620000090336a0 [ 2415.163505] copy_process+0xe34/0x1534 [ 2415.167307] kernel_clone+0x98/0x430 [ 2415.170931] __do_sys_clone+0x70/0xb0 [ 2415.174643] __arm64_sys_clone+0x2c/0x40 [ 2415.178621] invoke_syscall+0x50/0x120 [ 2415.182425] el0_svc_common.constprop.0+0x104/0x124 [ 2415.187375] do_el0_svc+0x3c/0xcc [ 2415.190736] el0_svc+0x38/0xc0 [ 2415.193832] el0t_64_sync_handler+0xbc/0x140 [ 2415.198162] el0t_64_sync+0x18c/0x190 [ 2415.201880] Code: bad PC value [ 2415.204975] ---[ end trace 0000000000000000 ]--- [ 2435.982529] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 2435.988717] rcu: 0-...0: (8 ticks this GP) idle=c29/1/0x4000000000000000 softirq=479942/479942 fqs=2433 [ 2435.998423] (detected by 2, t=5255 jiffies, g=905669, q=285 ncpus=4) [ 2436.004953] Task dump for CPU 0: [ 2436.008218] task:cgroup_fj_stres state:R running task stack: 0 pid:11626 ppid: 502 flags:0x00000202 [ 2436.018278] Call trace: [ 2436.020749] __switch_to+0xf0/0x160 [ 2436.024291] 0x3600d98dadcfb700 [ 2499.046529] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: full log links, https://qa-reports.linaro.org/lkft/linux-mainline-master/build/v5.19-rc5/te… https://lkft.validation.linaro.org/scheduler/job/5238392 -- Linaro LKFT https://lkft.linaro.org

3 years, 2 months

3
4
0 0

[PATCH 5.18 0/6] 5.18.9-rc1 review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.18.9 release. There are 6 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Sat, 02 Jul 2022 13:32:22 +0000. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.18.9-rc1… or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.18.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 5.18.9-rc1 Pavel Begunkov <asml.silence(a)gmail.com> io_uring: fix not locked access to fixed buf table Naveen N. Rao <naveen.n.rao(a)linux.vnet.ibm.com> powerpc/ftrace: Remove ftrace init tramp once kernel init is complete Kees Cook <keescook(a)chromium.org> hinic: Replace memcpy() with direct assignment Coly Li <colyli(a)suse.de> bcache: memset on stack variables in bch_btree_check() and bch_sectors_dirty_init() Linus Walleij <linus.walleij(a)linaro.org> clocksource/drivers/ixp4xx: Drop boardfile probe path Masahiro Yamada <masahiroy(a)kernel.org> tick/nohz: unexport __init-annotated tick_nohz_full_setup() ------------- Diffstat: Makefile | 4 +-- arch/powerpc/include/asm/ftrace.h | 4 ++- arch/powerpc/kernel/trace/ftrace.c | 15 ++++++++-- arch/powerpc/mm/mem.c | 2 ++ drivers/clocksource/Kconfig | 2 +- drivers/clocksource/timer-ixp4xx.c | 25 ----------------- drivers/md/bcache/btree.c | 1 + drivers/md/bcache/writeback.c | 1 + drivers/net/ethernet/huawei/hinic/hinic_devlink.c | 4 +-- fs/io_uring.c | 34 ++++++++++++----------- include/linux/platform_data/timer-ixp4xx.h | 11 -------- kernel/time/tick-sched.c | 1 - 12 files changed, 41 insertions(+), 63 deletions(-)

3 years, 2 months

12
16
0 0

next-20220704: juno-r2: Unable to handle kernel NULL pointer dereference at virtual address - scpi_send_message

by Naresh Kamboju

[please ignore this if it is already reported] Following kernel crash noticed on arm64 juno-r2 device while booting the Linux next-20220704 kernel. Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> metadata: git_ref: master git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next git_sha: b6f1f2fa2bddd69ff46a190b8120bd440fd50563 git_describe: next-20220704 kernel_version: 5.19.0-rc4 kernel-config: https://builds.tuxbuild.com/2BTJuNI06nsF1Tg4INLiJo5PLKT/config build-url: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/pipelines/579259300 artifact-location: https://builds.tuxbuild.com/2BTJuNI06nsF1Tg4INLiJo5PLKT System.map: https://builds.tuxbuild.com/2BTJuNI06nsF1Tg4INLiJo5PLKT/System.map vmlinux.xz: https://builds.tuxbuild.com/2BTJuNI06nsF1Tg4INLiJo5PLKT/vmlinux.xz toolchain: gcc-11 crash log: ---------- [ 3.243109] dma-pl330 7ff00000.dma-controller: DBUFF-1024x16bytes Num_Chans-8 Num_Peri-8 Num_Events-8 [ 3.257144] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 [ 3.265963] Mem abort info: [ 3.268764] ESR = 0x0000000096000004 [ 3.272532] EC = 0x25: DABT (current EL), IL = 32 bits [ 3.277894] SET = 0, FnV = 0 [ 3.280960] EA = 0, S1PTW = 0 [ 3.284109] FSC = 0x04: level 0 translation fault [ 3.289000] Data abort info: [ 3.291887] ISV = 0, ISS = 0x00000004 [ 3.295732] CM = 0, WnR = 0 [ 3.298702] [0000000000000010] user address but active_mm is swapper [ 3.305073] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 3.310654] Modules linked in: [ 3.313711] CPU: 2 PID: 10 Comm: kworker/u12:1 Not tainted 5.19.0-rc4-next-20220704 #1 [ 3.321642] Hardware name: ARM Juno development board (r2) (DT) [ 3.327569] Workqueue: events_unbound deferred_probe_work_func [ 3.333424] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3.340397] pc : scpi_send_message+0x30/0x290 [ 3.344760] lr : scpi_probe+0x2ec/0x4d0 [ 3.348598] sp : ffff80000b0d3a40 [ 3.351913] x29: ffff80000b0d3a40 x28: ffff80000af6a000 x27: 0000000000000000 [ 3.359065] x26: ffff000800982280 x25: ffff00082131b018 x24: ffff0008225f6b80 [ 3.366217] x23: ffff0008009bcc10 x22: 0000000000000001 x21: ffff00082131b018 [ 3.373367] x20: ffff80000af6a0b0 x19: ffff80000ad8dcc8 x18: ffffffffffffffff [ 3.380517] x17: 000000005d8019b5 x16: 00000000cd715321 x15: ffff80008b0d390d [ 3.387669] x14: 0000000000000001 x13: 007473696c5f7974 x12: 696e696666615f65 [ 3.394819] x11: 0000000000000040 x10: ffff80000aa62c50 x9 : ffff80000902e8dc [ 3.401970] x8 : ffff000822601300 x7 : 0000000000000009 x6 : 0000000000000001 [ 3.409120] x5 : 0000000000000000 x4 : 000000000000001c x3 : ffff80000b0d3b7c [ 3.416271] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 3.423421] Call trace: [ 3.425864] scpi_send_message+0x30/0x290 [ 3.429877] scpi_probe+0x2ec/0x4d0 [ 3.433368] platform_probe+0x74/0xf0 [ 3.437034] really_probe+0xc8/0x3e0 [ 3.440611] __driver_probe_device+0x84/0x190 [ 3.444972] driver_probe_device+0x44/0x100 [ 3.449158] __device_attach_driver+0xa4/0x150 [ 3.453606] bus_for_each_drv+0x84/0xe0 [ 3.457448] __device_attach+0xb0/0x1f0 [ 3.461286] device_initial_probe+0x20/0x30 [ 3.465473] bus_probe_device+0xa4/0xb0 [ 3.469316] deferred_probe_work_func+0xa8/0xfc [ 3.473855] process_one_work+0x1dc/0x450 [ 3.477872] worker_thread+0x2d0/0x450 [ 3.481625] kthread+0x108/0x110 [ 3.484856] ret_from_fork+0x10/0x20 [ 3.488439] Code: aa0103fb f9405785 a9025bf5 b9006fe4 (f94008a1) [ 3.494541] ---[ end trace 0000000000000000 ]--- [ 4.383179] atkbd serio1: keyboard reset failed on 1c070000.kmi [ 5.365484] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 5.373920] ata1.00: ATA-9: SanDisk SSD PLUS 120GB, UE5000RL, max UDMA/133 [ 5.380871] ata1.00: 234455040 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 5.389317] ata1.00: Features: Dev-Sleep [ 5.400248] ata1.00: configured for UDMA/100 [ 5.405730] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5 [ 5.416154] sd 0:0:0:0: [sda] 234455040 512-byte logical blocks: (120 GB/112 GiB) [ 5.423788] sd 0:0:0:0: [sda] Write Protect is off [ 5.428664] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.433913] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.443193] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.453537] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.467294] ata2: SATA link down (SStatus 0 SControl 0) [ 10.970428] input: PS/2 Generic Mouse as /devices/platform/bus@8000000/bus@8000000:motherboard-bus@8000000/bus@8000000:motherboard-bus@8000000:iofpga-bus@300000000/1c060000.kmi/serio0/input/input2 [ 11.096505] psmouse serio0: Failed to enable mouse on 1c060000.kmi [ 17.466565] input: PS/2 Generic Mouse as /devices/platform/bus@8000000/bus@8000000:motherboard-bus@8000000/bus@8000000:motherboard-bus@8000000:iofpga-bus@300000000/1c070000.kmi/serio1/input/input3 [ 17.592813] psmouse serio1: Failed to enable mouse on 1c070000.kmi [ 60.415405] random: crng init done Full test log links, https://qa-reports.linaro.org/lkft/linux-next-master-sanity/build/next-2022… https://lkft.validation.linaro.org/scheduler/job/5239233#L1058 -- Linaro LKFT https://lkft.linaro.org

3 years, 2 months

2
1
0 0

5.19.0-rc5: qemu-i386: traps: PANIC: double fault, error_code: 0x0

by Naresh Kamboju

Following kernel crash noticed on qemu-i386 while running LTP cve tests Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> metadata: git_ref: master git_repo: https://gitlab.com/Linaro/lkft/mirrors/torvalds/linux-mainline git_sha: 88084a3df1672e131ddc1b4e39eeacfd39864acf git_describe: v5.19-rc5 kernel_version: 5.19.0-rc5 kernel-config: https://builds.tuxbuild.com/2BSF0Azg4qZOVFsPdPsWOT0KBzM/config artifact-location: https://builds.tuxbuild.com/2BSF0Azg4qZOVFsPdPsWOT0KBzM/ System.map: https://builds.tuxbuild.com/2BSF0Azg4qZOVFsPdPsWOT0KBzM/System.map vmlinux.xz: https://builds.tuxbuild.com/2BSF0Azg4qZOVFsPdPsWOT0KBzM/vmlinux.xz steps to reproduce: cd /opt/ltp ./runltp -p -q -f cve cve-2014-0196.c:125: TPASS: Nothing bad happened, probably. Summary: passed 1 failed 0 broken 0 skipped 0 warnings 0 gethostbyname_r01 1 TPASS : not vulnerable tst_test.c:1433: TINFO: Timeout per run is 0h 15m 00s <47>[ 916.714682] systemd-journald[195]: Sent WATCHDOG=1 notification. <47>[ 916.915653] systemd-journald[195]: Successfully sent stream file descriptor to service manager. <0>[ 920.086226] traps: PANIC: double fault, error_code: 0x0 <4>[ 920.087343] double fault: 0000 [#1] PREEMPT SMP <4>[ 920.087914] CPU: 1 PID: 15074 Comm: keyctl02 Not tainted 5.19.0-rc5 #1 <4>[ 920.088131] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 <4>[ 920.088484] EIP: atomic64_add_return_cx8+0x21/0x2c <4>[ 920.088700] Code: 90 f0 0f c7 0e 75 fa c3 90 55 53 56 57 89 c6 89 d7 89 cd 89 d8 89 ca f0 0f c7 09 89 c3 89 d1 01 f3 11 f9 f0 0f c7 4d 00 75 f1 <89> d8 89 ca 5f 5e 5b 5d c3 90 90 55 53 56 57 89 c6 89 d7 89 cd 89 <4>[ 920.088700] EAX: 00000011 EBX: 00000010 ECX: 00000000 EDX: 00000000 <4>[ 920.088700] ESI: ffffffff EDI: ffffffff EBP: c1df3bb0 ESP: c3479eb0 <4>[ 920.088700] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: ffffffff <4>[ 920.088700] CR0: 80050033 CR2: 01f17320 CR3: 0a126000 CR4: 000006d0 <4>[ 920.088700] Call Trace: <4>[ 920.088700] ? pids_release+0x32/0x50 <4>[ 920.088700] ? cgroup_release+0x41/0xe0 <4>[ 920.088700] ? release_task+0x61/0x640 <4>[ 920.088700] ? trace_preempt_on+0x28/0x30 <4>[ 920.088700] ? _raw_write_unlock_irq+0x1b/0x30 <4>[ 920.088700] ? preempt_count_sub+0x7a/0xe0 <4>[ 920.088700] ? do_exit+0x50a/0x910 <4>[ 920.088700] ? syscall_enter_from_user_mode_work+0x135/0x150 <4>[ 920.088700] ? __ia32_sys_exit+0x15/0x20 <4>[ 920.088700] ? __do_fast_syscall_32+0x86/0xd0 <4>[ 920.088700] ? __this_cpu_preempt_check+0xf/0x11 <4>[ 920.088700] ? fpregs_restore_userregs+0x71/0xf0 <4>[ 920.088700] ? syscall_exit_to_user_mode+0x3c/0x60 <4>[ 920.088700] ? ret_from_fork+0x10/0x28 <4>[ 920.088700] ? do_fast_syscall_32+0x29/0x60 <4>[ 920.088700] ? do_SYSENTER_32+0x12/0x20 <4>[ 920.088700] ? entry_SYSENTER_32+0x98/0xf1 <4>[ 920.088700] Modules linked in: <4>[ 920.088700] ---[ end trace 0000000000000000 ]--- <4>[ 920.088700] EIP: atomic64_add_return_cx8+0x21/0x2c <4>[ 920.088700] Code: 90 f0 0f c7 0e 75 fa c3 90 55 53 56 57 89 c6 89 d7 89 cd 89 d8 89 ca f0 0f c7 09 89 c3 89 d1 01 f3 11 f9 f0 0f c7 4d 00 75 f1 <89> d8 89 ca 5f 5e 5b 5d c3 90 90 55 53 56 57 89 c6 89 d7 89 cd 89 <4>[ 920.088700] EAX: 00000011 EBX: 00000010 ECX: 00000000 EDX: 00000000 <4>[ 920.088700] ESI: ffffffff EDI: ffffffff EBP: c1df3bb0 ESP: c3479eb0 <4>[ 920.088700] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: ffffffff <4>[ 920.088700] CR0: 80050033 CR2: 01f17320 CR3: 0a126000 CR4: 000006d0 <0>[ 920.088700] Kernel panic - not syncing: Fatal exception in interrupt <0>[ 920.088700] Kernel Offset: disabled links, https://qa-reports.linaro.org/lkft/linux-mainline-master/build/v5.19-rc5/te… -- Linaro LKFT https://lkft.linaro.org

3 years, 2 months

1
0
0 0

5.19.0-rc5 : WARNING: CPU: 0 PID: 17 at kernel/irq/manage.c:789 __enable_irq+0x58/0x90

by Naresh Kamboju

While running LTP cpuhotplug the following kernel warning was noticed on arm64 Thundercomm Dragonboard 845c device. Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> metadata: git_ref: master git_repo: https://gitlab.com/Linaro/lkft/mirrors/torvalds/linux-mainline git_sha: 88084a3df1672e131ddc1b4e39eeacfd39864acf git_describe: v5.19-rc5 kernel_version: 5.19.0-rc5 kernel-config: https://builds.tuxbuild.com/2BSEyt8Sb19HSj6SnBFiMo6kiQh/config build-url: https://gitlab.com/Linaro/lkft/mirrors/torvalds/linux-mainline/-/pipelines/… artifact-location: https://builds.tuxbuild.com/2BSEyt8Sb19HSj6SnBFiMo6kiQh vmlinux.xz: https://builds.tuxbuild.com/2BSEyt8Sb19HSj6SnBFiMo6kiQh/vmlinux.xz System.map: https://builds.tuxbuild.com/2BSEyt8Sb19HSj6SnBFiMo6kiQh/System.map toolchain: gcc-11 steps to reproduce: # cd /opt/ltp # ./runltp -p -q -f cpuhotplug cpuhotplug04 1 TPASS: System prevented us from offlining the last CPU - cpu7 cpuhotplug04 2 TPASS: Success [ 37.419206] Detected VIPT I-cache on CPU0 [ 37.419326] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000 [ 37.419473] CPU0: Booted secondary processor 0x0000000000 [0x517f803c] [ 37.477891] ------------[ cut here ]------------ [ 37.482610] Unbalanced enable for IRQ 131 [ 37.486730] WARNING: CPU: 0 PID: 17 at kernel/irq/manage.c:789 __enable_irq+0x58/0x90 [ 37.494722] Modules linked in: snd_soc_hdmi_codec lontium_lt9611 venus_enc venus_dec mcp251xfd videobuf2_dma_contig can_dev hci_uart btqca btbcm qcom_pon qcom_spmi_adc5 qcom_spmi_temp_alarm rtc_pm8xxx qcom_vadc_common crct10dif_ce snd_soc_sdm845 snd_soc_rt5663 snd_soc_qcom_common snd_soc_rl6231 bluetooth soundwire_bus msm reset_qcom_pdc qcom_camss gpu_sched videobuf2_dma_sg drm_dp_aux_bus i2c_qcom_geni v4l2_fwnode drm_display_helper v4l2_async videobuf2_memops i2c_qcom_cci camcc_sdm845 venus_core v4l2_mem2mem spi_geni_qcom videobuf2_v4l2 videobuf2_common ath10k_snoc gpi qcom_rng ath10k_core ath mac80211 xhci_pci xhci_pci_renesas qcom_q6v5_mss qrtr qcom_q6v5_pas qcom_pil_info slim_qcom_ngd_ctrl qcom_q6v5 pdr_interface qcom_sysmon cfg80211 qcom_common icc_osm_l3 rfkill qcom_glink_smem display_connector lmh qmi_helpers slimbus qcom_wdt mdt_loader drm_kms_helper rmtfs_mem drm socinfo fuse [ 37.574852] CPU: 0 PID: 17 Comm: cpuhp/0 Not tainted 5.19.0-rc5 #1 [ 37.581155] Hardware name: Thundercomm Dragonboard 845c (DT) [ 37.586916] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 37.593999] pc : __enable_irq+0x58/0x90 [ 37.597937] lr : __enable_irq+0x58/0x90 [ 37.601862] sp : ffff800008223cb0 [ 37.605247] x29: ffff800008223cb0 x28: 0000000000000000 x27: ffff1a0201cdce18 [ 37.612531] x26: 0000000000000000 x25: ffffcde3da0e4000 x24: ffff1a0201cdcc20 [ 37.619813] x23: ffffcde3d9b53308 x22: ffffcde3d9b70fc8 x21: 0000000000000000 [ 37.627095] x20: 0000000000000083 x19: ffff1a02002a1600 x18: ffffffffffffffff [ 37.634373] x17: 0000000009a60b40 x16: 000000009e1ad4d3 x15: 0720072007200720 [ 37.641653] x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 [ 37.648933] x11: 0720072007200720 x10: ffffcde3d9bca7a8 x9 : ffffcde3d7321528 [ 37.656213] x8 : 00000000ffffefff x7 : ffffcde3d9bca7a8 x6 : 0000000000000000 [ 37.663489] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 37.670766] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1a0200342080 [ 37.678043] Call trace: [ 37.680552] __enable_irq+0x58/0x90 [ 37.684135] enable_irq+0x54/0xb0 [ 37.687539] qcom_cpufreq_ready+0x2c/0x40 [ 37.691649] cpufreq_online+0x550/0xa04 [ 37.695582] cpuhp_cpufreq_online+0x1c/0x2c [ 37.699857] cpuhp_invoke_callback+0x16c/0x5b0 [ 37.704407] cpuhp_thread_fun+0xd0/0x1c4 [ 37.708419] smpboot_thread_fn+0x1ec/0x220 [ 37.712607] kthread+0x100/0x110 [ 37.715924] ret_from_fork+0x10/0x20 [ 37.719597] ---[ end trace 0000000000000000 ]--- [ 37.778938] Detected VIPT I-cache on CPU1 Full test log: https://qa-reports.linaro.org/lkft/linux-mainline-master/build/v5.19-rc5/te… https://lkft.validation.linaro.org/scheduler/job/5238386#L4318 -- Linaro LKFT https://lkft.linaro.org

3 years, 2 months

1
0
0 0

v5.19-rc5: igt-test: Unable to handle kernel write to read-only memory at virtual address - drm_dev_unregister

by Naresh Kamboju

While running igt testing on arm64 Qcomm db410c the following kernel warning and crash reported with Linux mainline kernel. Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> metadata: git_ref: master git_repo: https://gitlab.com/Linaro/lkft/mirrors/torvalds/linux-mainline git_sha: 88084a3df1672e131ddc1b4e39eeacfd39864acf git_describe: v5.19-rc5 kernel_version: 5.19.0-rc5 kernel-config: https://builds.tuxbuild.com/2BSEyt8Sb19HSj6SnBFiMo6kiQh/config build-url: https://gitlab.com/Linaro/lkft/mirrors/torvalds/linux-mainline/-/pipelines/… artifact-location: https://builds.tuxbuild.com/2BSEyt8Sb19HSj6SnBFiMo6kiQh vmlinux.xz: https://builds.tuxbuild.com/2BSEyt8Sb19HSj6SnBFiMo6kiQh/vmlinux.xz System.map: https://builds.tuxbuild.com/2BSEyt8Sb19HSj6SnBFiMo6kiQh/System.map toolchain: gcc-11 igt-gpu-tools__url: https://gitlab.freedesktop.org/drm/igt-gpu-tools + ./igt-test.sh -d /usr/share/igt-gpu-tools -t CHAMELIUM -c 10.66.16.71 -h HDMI-A-1 Going to run igt Chamelium test Generate ~/.igtrc Generate Chamelium test list igt@kms_chamelium@hdmi-hpd igt@kms_chamelium@hdmi-hpd-fast <trim> Subtest hdmi-hpd-storm-disable: SKIP (0.000s) [181.885373] [08/88] kms_chamelium (hdmi-crc-single) [ 181.932031] Console: switching to colour dummy device 80x25 [ 181.932276] [IGT] kms_chamelium: executing [ 182.178035] [IGT] kms_chamelium: starting subtest hdmi-crc-single [ 183.696310] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000 [ 186.819771] msm_mdp 1a01000.mdp: vblank time out, crtc=0 [ 197.407969] [IGT] kms_chamelium: exiting, ret=98 [ 198.123226] Console: switching to colour frame buffer device 240x67 [ 208.352251] msm_mdp 1a01000.mdp: [drm] *ERROR* flip_done timed out [ 208.352889] msm_mdp 1a01000.mdp: [drm] *ERROR* [CRTC:57:crtc-0] commit wait timed out [ 218.592308] msm_mdp 1a01000.mdp: [drm] *ERROR* flip_done timed out [ 218.592951] msm_mdp 1a01000.mdp: [drm] *ERROR* [PLANE:33:plane-0] commit wait timed out [ 218.598698] ------------[ cut here ]------------ [ 218.605711] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:807 mdp5_crtc_atomic_flush+0x1b8/0x1d0 [msm] [ 218.611025] Modules linked in: rfkill snd_soc_hdmi_codec venus_enc venus_dec videobuf2_dma_contig adv7511 pm8916_wdt smsc75xx cec qcom_wcnss_pil msm qrtr qcom_camss venus_core qcom_q6v5_mss videobuf2_dma_sg gpu_sched qcom_pil_info v4l2_fwnode qcom_q6v5 snd_soc_lpass_apq8016 drm_dp_aux_bus qcom_sysmon v4l2_async snd_soc_lpass_cpu v4l2_mem2mem drm_display_helper display_connector qcom_common videobuf2_memops qcom_glink_smem snd_soc_msm8916_analog snd_soc_msm8916_digital snd_soc_apq8016_sbc snd_soc_lpass_platform videobuf2_v4l2 qmi_helpers snd_soc_qcom_common drm_kms_helper qcom_spmi_vadc mdt_loader qcom_spmi_temp_alarm videobuf2_common rtc_pm8xxx drm qcom_vadc_common i2c_qcom_cci qnoc_msm8916 qcom_stats socinfo qcom_pon crct10dif_ce qcom_rng icc_smd_rpm rmtfs_mem fuse [ 218.671585] CPU: 0 PID: 6 Comm: kworker/0:0 Not tainted 5.19.0-rc5 #1 [ 218.689678] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 218.696036] Workqueue: events drm_mode_rmfb_work_fn [drm] [ 218.702723] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 218.708118] pc : mdp5_crtc_atomic_flush+0x1b8/0x1d0 [msm] [ 218.714784] lr : mdp5_crtc_atomic_flush+0x44/0x1d0 [msm] [ 218.720337] sp : ffff800008053b10 [ 218.725571] x29: ffff800008053b10 x28: 0000000000000001 x27: ffff00000ca3c2c8 [ 218.729045] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000020 [ 218.736165] x23: 0000000000000070 x22: 0000000000000038 x21: ffff00000f374200 [ 218.743281] x20: ffff00000ca3e000 x19: ffff00000ca3c000 x18: 0000000000000001 [ 218.750398] x17: 0000000000000004 x16: 0000000000000000 x15: 0000000000000000 [ 218.757516] x14: 0000000000000020 x13: 0000000000000000 x12: 0000000000000020 [ 218.764635] x11: 00000000ffffffff x10: ffff000004f1e678 x9 : ffff800001566000 [ 218.771753] x8 : ffff000003295140 x7 : 0000000000000000 x6 : 0000000000000000 [ 218.778871] x5 : ffff00000ca3e000 x4 : 0000000000000000 x3 : 0000000000000000 [ 218.785987] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000023d0980 [ 218.793108] Call trace: [ 218.799906] mdp5_crtc_atomic_flush+0x1b8/0x1d0 [msm] [ 218.802347] drm_atomic_helper_commit_planes+0x160/0x210 [drm_kms_helper] [ 218.807678] msm_atomic_commit_tail+0x1b0/0x8d0 [msm] [ 218.814327] commit_tail+0xac/0x184 [drm_kms_helper] [ 218.819355] drm_atomic_helper_commit+0x150/0x37c [drm_kms_helper] [ 218.824471] drm_atomic_commit+0xb0/0xf0 [drm] [ 218.830345] drm_framebuffer_remove+0x444/0x4e4 [drm] [ 218.834813] drm_mode_rmfb_work_fn+0x84/0xac [drm] [ 218.839919] process_one_work+0x1dc/0x450 [ 218.844544] worker_thread+0x2d0/0x450 [ 218.848605] kthread+0x100/0x110 [ 218.852216] ret_from_fork+0x10/0x20 [ 218.855630] ---[ end trace 0000000000000000 ]--- [ 218.920029] msm_mdp 1a01000.mdp: vblank time out, crtc=0 [ 229.088439] msm_mdp 1a01000.mdp: [drm] *ERROR* flip_done timed out [ 229.094070] msm_mdp 1a01000.mdp: [drm] *ERROR* [CRTC:57:crtc-0] commit wait timed out [ 239.328613] msm_mdp 1a01000.mdp: [drm] *ERROR* flip_done timed out [ 239.334313] msm_mdp 1a01000.mdp: [drm] *ERROR* [CONNECTOR:32:HDMI-A-1] commit wait timed out [ 249.568128] msm_mdp 1a01000.mdp: [drm] *ERROR* flip_done timed out [ 249.574071] msm_mdp 1a01000.mdp: [drm] *ERROR* [PLANE:33:plane-0] commit wait timed out [ 249.712800] l6: Underflow of regulator enable count [ 249.731423] Failed to disable vddio: -EINVAL [ 249.742843] msm_dsi_phy 1a98300.dsi-phy: Runtime PM usage count underflow! [ 249.788343] ------------[ cut here ]------------ [ 249.799580] WARNING: CPU: 1 PID: 918 at drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:807 mdp5_crtc_atomic_flush+0x1b8/0x1d0 [msm] [ 249.811889] Modules linked in: rfkill snd_soc_hdmi_codec venus_enc venus_dec videobuf2_dma_contig adv7511 pm8916_wdt smsc75xx cec qcom_wcnss_pil msm qrtr qcom_camss venus_core qcom_q6v5_mss videobuf2_dma_sg gpu_sched qcom_pil_info v4l2_fwnode qcom_q6v5 snd_soc_lpass_apq8016 drm_dp_aux_bus qcom_sysmon v4l2_async snd_soc_lpass_cpu v4l2_mem2mem drm_display_helper display_connector qcom_common videobuf2_memops qcom_glink_smem snd_soc_msm8916_analog snd_soc_msm8916_digital snd_soc_apq8016_sbc snd_soc_lpass_platform videobuf2_v4l2 qmi_helpers snd_soc_qcom_common drm_kms_helper qcom_spmi_vadc mdt_loader qcom_spmi_temp_alarm videobuf2_common rtc_pm8xxx drm qcom_vadc_common i2c_qcom_cci qnoc_msm8916 qcom_stats socinfo qcom_pon crct10dif_ce qcom_rng icc_smd_rpm rmtfs_mem fuse [ 249.910734] CPU: 1 PID: 918 Comm: kms_chamelium Tainted: G W 5.19.0-rc5 #1 [ 249.925068] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 249.939565] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 249.954285] pc : mdp5_crtc_atomic_flush+0x1b8/0x1d0 [msm] [ 249.969740] lr : mdp5_crtc_atomic_flush+0x44/0x1d0 [msm] [ 249.985242] sp : ffff80000c413970 [ 250.000193] x29: ffff80000c413970 x28: 0000000000000001 x27: ffff00000ca3c2c8 [ 250.015308] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000020 [ 250.030393] x23: 0000000000000070 x22: 0000000000000038 x21: ffff00000f374800 [ 250.045369] x20: ffff00000ca3e000 x19: ffff00000ca3c000 x18: 0000000000000000 [ 250.060301] x17: 000000040044ffff x16: 00400032b5503510 x15: 0000000000000000 [ 250.075233] x14: ffff0000032b2080 x13: ffff800001773000 x12: 0000000030d4d91d [ 250.090193] x11: 000000000000000c x10: ffff80000aa62ac0 x9 : ffff800001566000 [ 250.105153] x8 : ffff00000f0f6180 x7 : 0000000000000000 x6 : 0000000000000000 [ 250.120023] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 250.134629] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000023d0900 [ 250.148685] Call trace: [ 250.162090] mdp5_crtc_atomic_flush+0x1b8/0x1d0 [msm] [ 250.175726] drm_atomic_helper_commit_planes+0x160/0x210 [drm_kms_helper] [ 250.188575] msm_atomic_commit_tail+0x1b0/0x8d0 [msm] [ 250.201697] commit_tail+0xac/0x184 [drm_kms_helper] [ 250.214380] drm_atomic_helper_commit+0x150/0x37c [drm_kms_helper] [ 250.227064] drm_atomic_commit+0xb0/0xf0 [drm] [ 250.239967] drm_client_modeset_commit_atomic+0x208/0x260 [drm] [ 250.252865] drm_client_modeset_commit_locked+0x68/0x1a0 [drm] [ 250.265757] drm_client_modeset_commit+0x3c/0x64 [drm] [ 250.278572] drm_fb_helper_lastclose+0x78/0xd0 [drm_kms_helper] [ 250.291139] drm_lastclose+0x44/0x90 [drm] [ 250.303977] drm_release+0x100/0x120 [drm] [ 250.316785] __fput+0x78/0x22c [ 250.329016] ____fput+0x1c/0x30 [ 250.341205] task_work_run+0x8c/0x1ac [ 250.353465] do_exit+0x2f8/0x984 [ 250.365655] do_group_exit+0x40/0xb0 [ 250.377785] __wake_up_parent+0x0/0x3c [ 250.389954] invoke_syscall+0x50/0x120 [ 250.402114] el0_svc_common.constprop.0+0x104/0x124 [ 250.414237] do_el0_svc+0x3c/0xcc [ 250.426298] el0_svc+0x38/0xc0 [ 250.438237] el0t_64_sync_handler+0xbc/0x140 [ 250.450160] el0t_64_sync+0x18c/0x190 [ 250.462003] ---[ end trace 0000000000000000 ]--- Starting subtest: hdmi-crc-single Subtest hdmi-crc-single: FAIL (15.228s) [250.605238] [09/88] kms_chamelium (hdmi-crc-fast) [ 250.648392] Console: switching to colour dummy device 80x25 [ 250.648623] [IGT] kms_chamelium: executing [ 250.854890] ------------[ cut here ]------------ [ 250.854984] gcc_mdss_ahb_clk already disabled [ 250.858801] WARNING: CPU: 2 PID: 64 at drivers/clk/clk.c:964 clk_core_disable+0x24c/0x264 [ 250.862889] Modules linked in: rfkill snd_soc_hdmi_codec venus_enc venus_dec videobuf2_dma_contig adv7511 pm8916_wdt smsc75xx cec qcom_wcnss_pil msm qrtr qcom_camss venus_core qcom_q6v5_mss videobuf2_dma_sg gpu_sched qcom_pil_info v4l2_fwnode qcom_q6v5 snd_soc_lpass_apq8016 drm_dp_aux_bus qcom_sysmon v4l2_async snd_soc_lpass_cpu v4l2_mem2mem drm_display_helper display_connector qcom_common videobuf2_memops qcom_glink_smem snd_soc_msm8916_analog snd_soc_msm8916_digital snd_soc_apq8016_sbc snd_soc_lpass_platform videobuf2_v4l2 qmi_helpers snd_soc_qcom_common drm_kms_helper qcom_spmi_vadc mdt_loader qcom_spmi_temp_alarm videobuf2_common rtc_pm8xxx drm qcom_vadc_common i2c_qcom_cci qnoc_msm8916 qcom_stats socinfo qcom_pon crct10dif_ce qcom_rng icc_smd_rpm rmtfs_mem fuse [ 250.880779] [IGT] kms_chamelium: starting subtest hdmi-crc-fast [ 250.916679] CPU: 2 PID: 64 Comm: kworker/2:2 Tainted: G W 5.19.0-rc5 #1 [ 250.916724] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 250.916748] Workqueue: pm pm_runtime_work [ 250.916802] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 250.916848] pc : clk_core_disable+0x24c/0x264 [ 250.916900] lr : clk_core_disable+0x24c/0x264 [ 250.974624] sp : ffff80000b24bbb0 [ 250.978938] x29: ffff80000b24bbb0 x28: 0000000000000000 x27: 0000000000000000 [ 250.982243] x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000d8b5900 [ 250.989360] x23: ffff80000abea618 x22: 0000000000000000 x21: ffff00000d8bbe80 [ 250.996478] x20: ffff000003270700 x19: ffff000003270700 x18: ffffffffffffffff [ 251.003597] x17: 000000040044ffff x16: 00400032b5503510 x15: ffff80008b24b897 [ 251.010716] x14: 0000000000000000 x13: 64656c6261736964 x12: 2079646165726c61 [ 251.017833] x11: 206b6c635f626861 x10: ffff80000aa4a7a8 x9 : ffff8000081a1528 [ 251.024951] x8 : 00000000ffffefff x7 : ffff80000aa4a7a8 x6 : 0000000000000000 [ 251.032071] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000027 [ 251.039186] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000003b29040 [ 251.046307] Call trace: [ 251.053413] clk_core_disable+0x24c/0x264 [ 251.055675] clk_disable+0x3c/0x5c [ 251.059841] clk_bulk_disable+0x44/0x60 [ 251.063140] mdss_runtime_suspend+0x48/0xa0 [msm] [ 251.066878] pm_generic_runtime_suspend+0x38/0x50 [ 251.071736] genpd_runtime_suspend+0xc4/0x310 [ 251.076421] __rpm_callback+0x50/0x180 [ 251.080760] rpm_callback+0x74/0x80 [ 251.084406] rpm_suspend+0x110/0x640 [ 251.087793] pm_runtime_work+0xd0/0xd4 [ 251.091611] process_one_work+0x1dc/0x450 [ 251.095170] worker_thread+0x154/0x450 [ 251.099251] kthread+0x100/0x110 [ 251.102896] ret_from_fork+0x10/0x20 [ 251.106281] ---[ end trace 0000000000000000 ]--- [ 251.110531] ------------[ cut here ]------------ [ 251.114483] gcc_mdss_ahb_clk already unprepared [ 251.119155] WARNING: CPU: 2 PID: 64 at drivers/clk/clk.c:822 clk_core_unprepare+0x210/0x230 <trim> Starting subtest: hdmi-cmp-planes-random Subtest hdmi-cmp-planes-random: FAIL (3.678s) [343.808430] [15/88] kms_chamelium (hdmi-frame-dump) [ 343.847491] Console: switching to colour dummy device 80x25 [ 343.847744] [IGT] kms_chamelium: executing [ 344.119508] [IGT] kms_chamelium: starting subtest hdmi-frame-dump [ 345.897236] [IGT] kms_chamelium: exiting, ret=98 [ 346.012383] Unable to handle kernel write to read-only memory at virtual address ffff80000175a5a8 [ 346.012543] Mem abort info: [ 346.020830] ESR = 0x000000009600004f [ 346.022947] EC = 0x25: DABT (current EL), IL = 32 bits [ 346.026999] SET = 0, FnV = 0 [ 346.032300] EA = 0, S1PTW = 0 [ 346.035073] FSC = 0x0f: level 3 permission fault [ 346.038225] Data abort info: [ 346.043079] ISV = 0, ISS = 0x0000004f [ 346.046116] CM = 0, WnR = 1 [ 346.049677] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081eff000 [ 346.052834] [ffff80000175a5a8] pgd=10000000bfeff003, p4d=10000000bfeff003, pud=10000000bfefe003, pmd=100000008c9fc003, pte=006000008bb6ff83 [ 346.059541] Internal error: Oops: 9600004f [#1] PREEMPT SMP [ 346.071693] Modules linked in: rfkill snd_soc_hdmi_codec venus_enc venus_dec videobuf2_dma_contig adv7511 pm8916_wdt smsc75xx cec qcom_wcnss_pil msm qrtr qcom_camss venus_core qcom_q6v5_mss videobuf2_dma_sg gpu_sched qcom_pil_info v4l2_fwnode qcom_q6v5 snd_soc_lpass_apq8016 drm_dp_aux_bus qcom_sysmon v4l2_async snd_soc_lpass_cpu v4l2_mem2mem drm_display_helper display_connector qcom_common videobuf2_memops qcom_glink_smem snd_soc_msm8916_analog snd_soc_msm8916_digital snd_soc_apq8016_sbc snd_soc_lpass_platform videobuf2_v4l2 qmi_helpers snd_soc_qcom_common drm_kms_helper qcom_spmi_vadc mdt_loader qcom_spmi_temp_alarm videobuf2_common rtc_pm8xxx drm qcom_vadc_common i2c_qcom_cci qnoc_msm8916 qcom_stats socinfo qcom_pon crct10dif_ce qcom_rng icc_smd_rpm rmtfs_mem fuse [ 346.123074] CPU: 1 PID: 962 Comm: kworker/1:0 Tainted: G W 5.19.0-rc5 #1 [ 346.145304] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 346.153030] Workqueue: events adv7511_hpd_work [adv7511] [ 346.159971] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 346.165267] pc : drm_dev_unregister+0x38/0xb4 [drm] [ 346.171950] lr : msm_drm_uninit.isra.0+0x190/0x1c0 [msm] [ 346.176811] sp : ffff80000bfbb840 [ 346.182363] x29: ffff80000bfbb840 x28: ffff00000b803000 x27: ffff00000b803018 Broadcast message from systemd-journald@dragonboard-410c (Mon 2022-07-04 00:31:16 UTC): kernel[351]: [ 346.059541] Internal error: Oops: 9600004f [#1] PREEMPT SMP [ 346.185580] x26: ffff00000b803090 x25: ffff00000ba39100 x24: ffff00000ca3c000 [ 346.216430] x11: 0000000000000040 x10: ffff80000aa62ac0 x9 : ffff80000171bbc0 [ 346.216469] x8 : ffff00000a273258 x7 : 0000000000000000 x6 : 0000000000000001 [ 346.222703] x5 : 0000000000000000 x4 : 0000000000000000 x3 : dead000000000100 [ 346.229820] x2 : 00000000016e8530 x1 : 0000000001000130 x0 : ffff80000175a558 [ 346.236940] Call trace: [ 346.244052] drm_dev_unregister+0x38/0xb4 [drm] [ 346.246313] msm_drm_uninit.isra.0+0x190/0x1c0 [msm] [ 346.250827] msm_drm_unbind+0x1c/0x30 [msm] [ 346.256034] component_del+0xb0/0x16c [ 346.259940] dsi_dev_detach+0x2c/0x40 [msm] [ 346.263758] dsi_host_detach+0x28/0x6c [msm] [ 346.267752] mipi_dsi_detach+0x34/0x50 [ 346.272264] adv7533_mode_set+0x68/0x90 [adv7511] [ 346.275826] adv7511_bridge_mode_set+0x218/0x220 [adv7511] [ 346.280600] drm_bridge_chain_mode_set+0x64/0x90 [drm] [ 346.285983] crtc_set_mode+0x190/0x1e0 [drm_kms_helper] [ 346.291104] drm_atomic_helper_commit_modeset_disables+0x48/0x60 [drm_kms_helper] [ 346.296228] msm_atomic_commit_tail+0x1a0/0x8d0 [msm] [ 346.303867] commit_tail+0xac/0x184 [drm_kms_helper] [ 346.308900] drm_atomic_helper_commit+0x150/0x37c [drm_kms_helper] [ 346.313935] drm_atomic_commit+0xb0/0xf0 [drm] [ 346.319926] drm_client_modeset_commit_atomic+0x208/0x260 [drm] [ 346.324352] drm_client_modeset_commit_locked+0x68/0x1a0 [drm] [ 346.330168] drm_client_modeset_commit+0x3c/0x64 [drm] [ 346.336069] drm_fb_helper_set_par+0xd4/0x130 [drm_kms_helper] [ 346.341192] drm_fb_helper_hotplug_event.part.0+0xb8/0xf0 [drm_kms_helper] [ 346.347008] drm_fb_helper_output_poll_changed+0x44/0x50 [drm_kms_helper] [ 346.353866] drm_kms_helper_hotplug_event+0x38/0x50 [drm_kms_helper] [ 346.360723] drm_bridge_connector_hpd_cb+0xa4/0xbc [drm_kms_helper] [ 346.367147] drm_bridge_hpd_notify+0x48/0x64 [drm] [ 346.373135] adv7511_hpd_work+0x124/0x13c [adv7511] [ 346.377996] process_one_work+0x1dc/0x450 [ 346.382769] worker_thread+0x154/0x450 [ 346.386935] kthread+0x100/0x110 [ 346.390581] ret_from_fork+0x10/0x20 [ 346.393973] Code: b940b821 0a020021 36d00041 97fff18b (3901427f) [ 346.397534] ---[ end trace 0000000000000000 ]--- kernel[351]: [ 346.393973] Code: b940b821 0a020021 36d00041 97fff18b (3901427f) [ 346.617897] fbcon_init: detected unhandled fb_set_par error, error code -16 [ 346.619178] Console: switching to colour frame buffer device 240x67 Starting subtest: hdmi-frame-dump Subtest hdmi-frame-dump: FAIL (1.775s) https://qa-reports.linaro.org/lkft/linux-mainline-master/build/v5.19-rc5/te… -- Linaro LKFT https://lkft.linaro.org

3 years, 2 months

1
0
0 0

[PATCH 5.4 00/16] 5.4.203-rc1 review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.203 release. There are 16 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Sat, 02 Jul 2022 13:32:22 +0000. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.203-rc… or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 5.4.203-rc1 Stefan Agner <stefan(a)agner.ch> crypto: arm/ghash-ce - define fpu before fpu registers are referenced Ard Biesheuvel <ard.biesheuvel(a)linaro.org> crypto: arm - use Kconfig based compiler checks for crypto opcodes Jian Cai <jiancai(a)google.com> ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler Stefan Agner <stefan(a)agner.ch> ARM: OMAP2+: drop unnecessary adrl Stefan Agner <stefan(a)agner.ch> ARM: 8929/1: use APSR_nzcv instead of r15 as mrc operand Nick Desaulniers <ndesaulniers(a)google.com> ARM: 8933/1: replace Sun/Solaris style flag on section directive Ard Biesheuvel <ardb(a)kernel.org> crypto: arm/sha512-neon - avoid ADRL pseudo instruction Ard Biesheuvel <ardb(a)kernel.org> crypto: arm/sha256-neon - avoid ADRL pseudo instruction Jian Cai <caij2003(a)gmail.com> ARM: 8971/1: replace the sole use of a symbol with its definition Stefan Agner <stefan(a)agner.ch> ARM: 8990/1: use VFP assembler mnemonics in register load/store macros Stefan Agner <stefan(a)agner.ch> ARM: 8989/1: use .fpu assembler directives instead of assembler arguments Vladimir Oltean <vladimir.oltean(a)nxp.com> net: mscc: ocelot: allow unregistered IP multicast flooding Naveen N. Rao <naveen.n.rao(a)linux.vnet.ibm.com> kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add] Naveen N. Rao <naveen.n.rao(a)linux.vnet.ibm.com> powerpc/ftrace: Remove ftrace init tramp once kernel init is complete Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> clocksource/drivers/ixp4xx: remove __init from ixp4xx_timer_setup() Christoph Hellwig <hch(a)lst.de> drm: remove drm_fb_helper_modinit ------------- Diffstat: Makefile | 4 +- arch/arm/boot/bootp/init.S | 2 +- arch/arm/boot/compressed/big-endian.S | 2 +- arch/arm/boot/compressed/head.S | 4 +- arch/arm/boot/compressed/piggy.S | 2 +- arch/arm/crypto/Kconfig | 14 +++-- arch/arm/crypto/Makefile | 32 ++--------- arch/arm/crypto/crct10dif-ce-core.S | 2 +- arch/arm/crypto/ghash-ce-core.S | 4 +- arch/arm/crypto/sha1-ce-core.S | 1 + arch/arm/crypto/sha2-ce-core.S | 1 + arch/arm/crypto/sha256-armv4.pl | 4 +- arch/arm/crypto/sha256-core.S_shipped | 4 +- arch/arm/crypto/sha512-armv4.pl | 4 +- arch/arm/crypto/sha512-core.S_shipped | 4 +- arch/arm/include/asm/assembler.h | 3 +- arch/arm/include/asm/vfpmacros.h | 19 ++++--- arch/arm/kernel/iwmmxt.S | 89 +++++++++++++++--------------- arch/arm/kernel/iwmmxt.h | 47 ++++++++++++++++ arch/arm/mach-omap2/sleep34xx.S | 2 +- arch/arm/mm/proc-arm1020.S | 2 +- arch/arm/mm/proc-arm1020e.S | 2 +- arch/arm/mm/proc-arm1022.S | 2 +- arch/arm/mm/proc-arm1026.S | 6 +- arch/arm/mm/proc-arm720.S | 2 +- arch/arm/mm/proc-arm740.S | 2 +- arch/arm/mm/proc-arm7tdmi.S | 2 +- arch/arm/mm/proc-arm920.S | 2 +- arch/arm/mm/proc-arm922.S | 2 +- arch/arm/mm/proc-arm925.S | 2 +- arch/arm/mm/proc-arm926.S | 6 +- arch/arm/mm/proc-arm940.S | 2 +- arch/arm/mm/proc-arm946.S | 2 +- arch/arm/mm/proc-arm9tdmi.S | 2 +- arch/arm/mm/proc-fa526.S | 2 +- arch/arm/mm/proc-feroceon.S | 2 +- arch/arm/mm/proc-mohawk.S | 2 +- arch/arm/mm/proc-sa110.S | 2 +- arch/arm/mm/proc-sa1100.S | 2 +- arch/arm/mm/proc-v6.S | 2 +- arch/arm/mm/proc-v7.S | 2 +- arch/arm/mm/proc-v7m.S | 4 +- arch/arm/mm/proc-xsc3.S | 2 +- arch/arm/mm/proc-xscale.S | 2 +- arch/arm/vfp/Makefile | 2 - arch/arm/vfp/vfphw.S | 30 ++++++---- arch/powerpc/include/asm/ftrace.h | 5 +- arch/powerpc/kernel/trace/ftrace.c | 15 ++++- arch/powerpc/mm/mem.c | 2 + arch/s390/include/asm/kexec.h | 10 ++++ arch/x86/include/asm/kexec.h | 9 +++ drivers/clocksource/mmio.c | 2 +- drivers/clocksource/timer-ixp4xx.c | 10 ++-- drivers/gpu/drm/drm_crtc_helper_internal.h | 10 ---- drivers/gpu/drm/drm_fb_helper.c | 21 ------- drivers/gpu/drm/drm_kms_helper_common.c | 25 ++++----- drivers/net/ethernet/mscc/ocelot.c | 8 ++- include/linux/kexec.h | 46 ++++++++++++--- include/linux/platform_data/timer-ixp4xx.h | 5 +- kernel/kexec_file.c | 34 ------------ 60 files changed, 289 insertions(+), 247 deletions(-)

3 years, 2 months

8
7
0 0

[PATCH 5.10 00/12] 5.10.128-rc1 review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.128 release. There are 12 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Sat, 02 Jul 2022 13:32:22 +0000. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.128-r… or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 5.10.128-rc1 Vladimir Oltean <vladimir.oltean(a)nxp.com> net: mscc: ocelot: allow unregistered IP multicast flooding Naveen N. Rao <naveen.n.rao(a)linux.vnet.ibm.com> powerpc/ftrace: Remove ftrace init tramp once kernel init is complete Dave Chinner <dchinner(a)redhat.com> xfs: check sb_meta_uuid for dabuf buffer recovery Darrick J. Wong <djwong(a)kernel.org> xfs: remove all COW fork extents when remounting readonly Yang Xu <xuyang2018.jy(a)fujitsu.com> xfs: Fix the free logic of state in xfs_attr_node_hasname Brian Foster <bfoster(a)redhat.com> xfs: punch out data fork delalloc blocks on COW writeback failure Rustam Kovhaev <rkovhaev(a)gmail.com> xfs: use kmem_cache_free() for kmem_cache objects Coly Li <colyli(a)suse.de> bcache: memset on stack variables in bch_btree_check() and bch_sectors_dirty_init() Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> clocksource/drivers/ixp4xx: remove __init from ixp4xx_timer_setup() Masahiro Yamada <masahiroy(a)kernel.org> tick/nohz: unexport __init-annotated tick_nohz_full_setup() Christoph Hellwig <hch(a)lst.de> drm: remove drm_fb_helper_modinit Amir Goldstein <amir73il(a)gmail.com> MAINTAINERS: add Amir as xfs maintainer for 5.10.y ------------- Diffstat: MAINTAINERS | 3 ++- Makefile | 4 ++-- arch/powerpc/include/asm/ftrace.h | 4 +++- arch/powerpc/kernel/trace/ftrace.c | 15 ++++++++++++--- arch/powerpc/mm/mem.c | 2 ++ drivers/clocksource/mmio.c | 2 +- drivers/clocksource/timer-ixp4xx.c | 10 ++++------ drivers/gpu/drm/drm_crtc_helper_internal.h | 10 ---------- drivers/gpu/drm/drm_fb_helper.c | 21 --------------------- drivers/gpu/drm/drm_kms_helper_common.c | 25 ++++++++++++------------- drivers/md/bcache/btree.c | 1 + drivers/md/bcache/writeback.c | 1 + drivers/net/ethernet/mscc/ocelot.c | 8 ++++++-- fs/xfs/libxfs/xfs_attr.c | 13 +++++-------- fs/xfs/xfs_aops.c | 15 ++++++++++++--- fs/xfs/xfs_buf_item_recover.c | 2 +- fs/xfs/xfs_extfree_item.c | 6 +++--- fs/xfs/xfs_super.c | 14 +++++++++++--- include/linux/platform_data/timer-ixp4xx.h | 5 ++--- kernel/time/tick-sched.c | 1 - 20 files changed, 80 insertions(+), 82 deletions(-)

3 years, 2 months

9
8
0 0

[PATCH 4.19 00/49] 4.19.250-rc1 review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.250 release. There are 49 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Sat, 02 Jul 2022 13:32:22 +0000. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.250-r… or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 4.19.250-rc1 Liu Shixin <liushixin2(a)huawei.com> swiotlb: skip swiotlb_bounce when orig_addr is zero Diederik de Haas <didi.debian(a)cknow.org> net/sched: move NULL ptr check to qdisc_put() too Vladimir Oltean <vladimir.oltean(a)nxp.com> net: mscc: ocelot: allow unregistered IP multicast flooding Naveen N. Rao <naveen.n.rao(a)linux.vnet.ibm.com> kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add] Hsin-Yi Wang <hsinyi(a)chromium.org> fdt: Update CRC check for rng-seed Masahiro Yamada <masahiroy(a)kernel.org> xen: unexport __init-annotated xen_xlate_map_ballooned_pages() Christoph Hellwig <hch(a)lst.de> drm: remove drm_fb_helper_modinit Jason A. Donenfeld <Jason(a)zx2c4.com> powerpc/pseries: wire up rng during setup_arch() Masahiro Yamada <masahiroy(a)kernel.org> kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt) Masahiro Yamada <masahiroy(a)kernel.org> modpost: fix section mismatch check for exported init/exit sections Miaoqian Lin <linmq006(a)gmail.com> ARM: cns3xxx: Fix refcount leak in cns3xxx_init Miaoqian Lin <linmq006(a)gmail.com> ARM: Fix refcount leak in axxia_boot_secondary Miaoqian Lin <linmq006(a)gmail.com> soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe Miaoqian Lin <linmq006(a)gmail.com> ARM: exynos: Fix refcount leak in exynos_map_pmu Lucas Stach <l.stach(a)pengutronix.de> ARM: dts: imx6qdl: correct PU regulator ramp delay Jason A. Donenfeld <Jason(a)zx2c4.com> powerpc/powernv: wire up rng during setup_arch Andrew Donnellan <ajd(a)linux.ibm.com> powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address Naveen N. Rao <naveen.n.rao(a)linux.vnet.ibm.com> powerpc: Enable execve syscall exit tracepoint Liang He <windhl(a)126.com> xtensa: Fix refcount leak bug in time.c Liang He <windhl(a)126.com> xtensa: xtfpga: Fix refcount leak bug in setup Hans de Goede <hdegoede(a)redhat.com> iio: adc: axp288: Override TS pin bias current for some models Vincent Whitchurch <vincent.whitchurch(a)axis.com> iio: trigger: sysfs: fix use-after-free on remove Zheyu Ma <zheyuma97(a)gmail.com> iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up() Haibo Chen <haibo.chen(a)nxp.com> iio: accel: mma8452: ignore the return value of reset operation Dmitry Rokosov <DDRokosov(a)sberdevices.ru> iio:accel:bma180: rearrange iio trigger get and register Dmitry Rokosov <DDRokosov(a)sberdevices.ru> iio:chemical:ccs811: rearrange iio trigger get and register Xu Yang <xu.yang_2(a)nxp.com> usb: chipidea: udc: check request status before setting device address Mathias Nyman <mathias.nyman(a)linux.intel.com> xhci: turn off port power in shutdown Baruch Siach <baruch(a)tkos.co.il> iio: adc: vf610: fix conversion mode sysfs node name Dan Carpenter <dan.carpenter(a)oracle.com> gpio: winbond: Fix error code in winbond_gpio_get() Stephan Gerhold <stephan.gerhold(a)kernkonzept.com> virtio_net: fix xdp_rxq_info bug after suspend/resume Kai-Heng Feng <kai.heng.feng(a)canonical.com> igb: Make DMA faster when CPU is active on the PCIe link David Howells <dhowells(a)redhat.com> afs: Fix dynamic root getattr huhai <huhai(a)kylinos.cn> MIPS: Remove repetitive increase irq_err_count Julien Grall <jgrall(a)amazon.com> x86/xen: Remove undefined behavior in setup_features() Eric Dumazet <edumazet(a)google.com> erspan: do not assume transport header is always set Peilin Ye <peilin.ye(a)bytedance.com> net/sched: sch_netem: Fix arithmetic in netem_dump() for 32-bit platforms Jay Vosburgh <jay.vosburgh(a)canonical.com> bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers Macpaul Lin <macpaul.lin(a)mediatek.com> USB: serial: option: add Quectel RM500K module support Yonglin Tan <yonglin.tan(a)outlook.com> USB: serial: option: add Quectel EM05-G modem Carlo Lobrano <c.lobrano(a)gmail.com> USB: serial: option: add Telit LE910Cx 0x1250 composition Jason A. Donenfeld <Jason(a)zx2c4.com> random: quiet urandom warning ratelimit suppression message Nikos Tsironis <ntsironis(a)arrikto.com> dm era: commit metadata in postsuspend after worker stops Edward Wu <edwardwu(a)realtek.com> ata: libata: add qc->flags in ata_qc_complete_template tracepoint Tim Crawford <tcrawford(a)system76.com> ALSA: hda/realtek: Add quirk for Clevo PD70PNT Takashi Iwai <tiwai(a)suse.de> ALSA: hda/conexant: Fix missing beep setup Takashi Iwai <tiwai(a)suse.de> ALSA: hda/via: Fix missing beep setup Jason A. Donenfeld <Jason(a)zx2c4.com> random: schedule mix_interrupt_randomness() less often Jiri Slaby <jslaby(a)suse.cz> vt: drop old FONT ioctls ------------- Diffstat: Documentation/ABI/testing/sysfs-bus-iio-vf610 | 2 +- Makefile | 6 +- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- arch/arm/mach-axxia/platsmp.c | 1 + arch/arm/mach-cns3xxx/core.c | 2 + arch/arm/mach-exynos/exynos.c | 1 + arch/mips/vr41xx/common/icu.c | 2 - arch/powerpc/kernel/process.c | 2 +- arch/powerpc/kernel/rtas.c | 11 +- arch/powerpc/platforms/powernv/powernv.h | 2 + arch/powerpc/platforms/powernv/rng.c | 52 ++++++--- arch/powerpc/platforms/powernv/setup.c | 2 + arch/powerpc/platforms/pseries/pseries.h | 2 + arch/powerpc/platforms/pseries/rng.c | 11 +- arch/powerpc/platforms/pseries/setup.c | 1 + arch/s390/include/asm/kexec.h | 10 ++ arch/x86/include/asm/kexec.h | 9 ++ arch/xtensa/kernel/time.c | 1 + arch/xtensa/platforms/xtfpga/setup.c | 1 + drivers/char/random.c | 4 +- drivers/gpio/gpio-vr41xx.c | 2 - drivers/gpio/gpio-winbond.c | 7 +- drivers/gpu/drm/drm_crtc_helper_internal.h | 10 -- drivers/gpu/drm/drm_fb_helper.c | 21 ---- drivers/gpu/drm/drm_kms_helper_common.c | 25 +++-- drivers/iio/accel/bma180.c | 3 +- drivers/iio/accel/mma8452.c | 10 +- drivers/iio/adc/axp288_adc.c | 8 ++ drivers/iio/chemical/ccs811.c | 4 +- drivers/iio/gyro/mpu3050-core.c | 1 + drivers/iio/trigger/iio-trig-sysfs.c | 1 + drivers/md/dm-era-target.c | 8 +- drivers/net/bonding/bond_main.c | 4 +- drivers/net/ethernet/intel/igb/igb_main.c | 12 +-- drivers/net/ethernet/mscc/ocelot.c | 8 +- drivers/net/virtio_net.c | 25 ++--- drivers/of/fdt.c | 8 +- drivers/soc/bcm/brcmstb/pm/pm-arm.c | 1 + drivers/tty/vt/vt.c | 39 +------ drivers/tty/vt/vt_ioctl.c | 149 -------------------------- drivers/usb/chipidea/udc.c | 3 + drivers/usb/host/xhci-hub.c | 2 +- drivers/usb/host/xhci.c | 15 ++- drivers/usb/host/xhci.h | 2 + drivers/usb/serial/option.c | 6 ++ drivers/xen/features.c | 2 +- drivers/xen/xlate_mmu.c | 1 - fs/afs/inode.c | 3 +- include/linux/kd.h | 8 -- include/linux/kexec.h | 46 ++++++-- include/linux/ratelimit.h | 12 ++- include/trace/events/libata.h | 1 + kernel/dma/swiotlb.c | 3 +- kernel/kexec_file.c | 34 ------ net/ipv4/ip_gre.c | 15 ++- net/ipv6/ip6_gre.c | 15 ++- net/sched/sch_generic.c | 5 +- net/sched/sch_netem.c | 4 +- scripts/mod/modpost.c | 2 +- sound/pci/hda/patch_conexant.c | 4 +- sound/pci/hda/patch_realtek.c | 1 + sound/pci/hda/patch_via.c | 4 +- 62 files changed, 271 insertions(+), 387 deletions(-)

3 years, 2 months

7
6
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Lkft-triage