Hi,
I hope everything is going well.
Our company recently introduced the office chair pictured below, which
is available in multiple colors.
Chairs are available in black, white, blue, grey, green, red, pink,
purple, and cyan.
Dense foam that is more comfortable to sit on while also being more
elastic, tough, and long-lasting.
Steel structure that is 1.8 percent thicker, more sturdy, and more
strong.
The smooth, non-abrasive surface has no negative impact on the skin or
the wearer's clothing.
With this equipment, you can lift up to 300 pounds. Improvements have
been made to the gas lift setup for class 3.
The tests were carried out on a rubber roller that can travel silently
for 1,000 kilometers at a time.
Rotating rollers with the ability to travel in numerous directions and
rotate 360 degrees at their maximum rotation.
It can only support a maximum weight of 300 pounds. With the use of
this feature, users can recline their chairs.
The chair can be reclined in any direction between 90 and 180 degrees.
The chair bounces when the knob under the seat is turned. (See
illustration.)
The dimensions are 22.5 cm on the front and 30.5 cm on the back of the
shoe.
You can choose between 14" and 20" broad chairs depending on your
preference.
The seat height can be adjusted from 17.3 inches to 21.5 inches, with a
maximum height of 21.5 inches.
Other activities such as computer gaming, watching television, working,
and resting are all possible with this setup.
Consequently, your living room or bedroom will be completely
transformed.
Chair pricing start at 225.50 for one chair
For two chairs: 195.50 each
For three or more chairs: 175.50 each
Would you be interested in receiving one or more of our chairs?
Send us your location for shipment, and we'll in touch with logistics
to make the shipment.
[chair-5-642x1024.jpg] [gaming-chairs-1106794316.jpg]
[homall-lilac-gaming-chair.jpg]
[Gaming-Chair-High-Back-Computer-Chair-PU-Leather-Executive-Ergonomic-A
djustable-Swivel-Task-Chair-with-Headrest-and-Lumbar-Supp.jpg]
[Homall-Gaming-Chair-Office-Chair.jpg]
Shoulders are supported from the top of the head and neck. Our seats
have a natural body shape that you will like.
With its pu leather furniture, this residence offers the greatest
amount of comfort.
Specification:
It is possible to change the angle of the locking mechanism between 90
and 180 degrees by turning the knob.
The spring cylinder's height can be changed by adjusting the bracket.
When it comes to toughness and durability, this foundation is a
five-star foundation.
Orthopaedic and ergonomic issues are given the highest attention during
the design phase of the project.
Pu leather is a high-end leather that is manufactured from pigskin.
The chair's headrest and lumbar coils are included in the purchase
price.
The maximum weight that may be carried is 300 pounds.
The backrest measures 22.5 x 30 inches in size.
Would you be interested in receiving one or more of our chairs?
Send us your location for shipment, and we'll in touch with logistics
to make the shipment.
Thanks,
Harvey
Hi,
How are things going at the moment?
This drone is available in our warehouse.
I'll send you an email with more specific introduction about the
product.
Level 7 wind resistance.
Flight accuracy can be improved by using GPS positioning mode during
the flight.
The distance between two 5G wifi fpv networks can be up to 2000 meters.
Keep up with me: The plane will maintain a fixed position over the
phone and will move in the same direction as the operator..
The plane will fly in circles as a result of the orbital motion, which
will provide a cooler shooting viewpoint.
In order to use gesture recognition for photography, you must be within
1-3 meters of the aircraft and make a gesture at the camera.
In waypoint flight mode, all you have to do is sketch a route on the
screen and the helicopter will follow it.
With the auto-return function enabled. When the aircraft loses contact
with the controller, the aircraft will return to the takeoff location
using the GPS trajectory as a navigation aid.
The flight time is up to 28 minutes when using a 11.4V 2850mAh battery.
In headless mode, there is no need to modify the aircraft's position
before take-off.
With the one-click back option, you may effortlessly get back on track.
Takeoff and landing are accomplished with a single click. With a single
button press, the drone will take off or return to the take-off
position autonomously, saving you time and effort.
Overcurrent prevention is included with low power protection.
You can fly up, down, forward, backward, left, and right using the six
channels available.
A six-axis gyroscope provides more stable flight and easier control
than previous models.
High-strength technical plastics are used in the construction of the
quadrotor fuselage, which makes it both lightweight and durable.
Pictures can be accompanied by music and video for sharing: When it
comes to images, you can choose to share one or numerous photos,
however videos can only be shared one at a time.
Pricing:
For one drone at 288.90
For two drones at 268.90 each
For three drones at 258.90 each
Would you be interested in receiving one or two of our drones?
We will need your location to ship the drone to you.
In addition, we will make contact with logistics to make arrangements
for the shipment.
[Aviator_8811_Pro_Drone-696x618.jpg]
[8811-RC-Drone-with-Camera-4K-Drone-5G.jpg]
[49901378606ee189aa4f03dc7532d237-product.jpg]
[Aviator_8811_Pro_cameras.jpg]
[Aviator_8811_Pro_design.jpg]
[Aviator_8811_Pro_transmitter_button_layout.jpg]
[2t.jpg]
FPV Image transmission with 5G WiFi at a distance of 2000m
6K wide-angle adjustable camera with two-axis mechanical stabilization
and 120 degrees of rotation.
6CH is the channel number for the ESC camera.
Lithium-ion battery with a voltage of 11.4V and a capacity of 2850mAh
(included)
Battery for the transmitter is a rechargeable lithium battery.
Flight duration is 28 minutes.
Time required for charging: approximately 4 hours
Distance between the remote control and the device: around 2000m
The color is black.
The field of view is 110 degrees broad.
Dimensions of a quadrilateral:
Product folding dimensions (in centimeters): 17x11.5x6.7cm
Product development dimensions (in centimeters): 26x26x6.7cm
Would you be interested in receiving one or two of our drones?
We will need your location to ship the drone to you.
In addition, we will make contact with logistics to make arrangements
for the shipment.
Thanks,
Ray
On Wed, 11 Aug 2021 at 00:32, Nicholas Richardson
<richardsonnick(a)google.com> wrote:
>
> From: Nick Richardson <richardsonnick(a)google.com>
>
> In order to represent the distribution of imix packet sizes, a
> pre-computed data structure is used. It features 100 (IMIX_PRECISION)
> "bins". Contiguous ranges of these bins represent the respective
> packet size of each imix entry. This is done to avoid the overhead of
> selecting the correct imix packet size based on the corresponding weights.
>
> Example:
> imix_weights 40,7 576,4 1500,1
> total_weight = 7 + 4 + 1 = 12
>
> pkt_size 40 occurs 7/total_weight = 58% of the time
> pkt_size 576 occurs 4/total_weight = 33% of the time
> pkt_size 1500 occurs 1/total_weight = 9% of the time
>
> We generate a random number between 0-100 and select the corresponding
> packet size based on the specified weights.
> Eg. random number = 358723895 % 100 = 65
> Selects the packet size corresponding to index:65 in the pre-computed
> imix_distribution array.
> An example of the pre-computed array is below:
>
> The imix_distribution will look like the following:
> 0 -> 0 (index of imix_entry.size == 40)
> 1 -> 0 (index of imix_entry.size == 40)
> 2 -> 0 (index of imix_entry.size == 40)
> [...] -> 0 (index of imix_entry.size == 40)
> 57 -> 0 (index of imix_entry.size == 40)
> 58 -> 1 (index of imix_entry.size == 576)
> [...] -> 1 (index of imix_entry.size == 576)
> 90 -> 1 (index of imix_entry.size == 576)
> 91 -> 2 (index of imix_entry.size == 1500)
> [...] -> 2 (index of imix_entry.size == 1500)
> 99 -> 2 (index of imix_entry.size == 1500)
>
> Create and use "bin" representation of the imix distribution.
>
> Signed-off-by: Nick Richardson <richardsonnick(a)google.com>
> ---
> net/core/pktgen.c | 41 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> diff --git a/net/core/pktgen.c b/net/core/pktgen.c
> index a7e45eaccef7..ac1de15000e2 100644
> --- a/net/core/pktgen.c
> +++ b/net/core/pktgen.c
> @@ -177,6 +177,7 @@
> #define MPLS_STACK_BOTTOM htonl(0x00000100)
> /* Max number of internet mix entries that can be specified in imix_weights. */
> #define MAX_IMIX_ENTRIES 20
> +#define IMIX_PRECISION 100 /* Precision of IMIX distribution */
>
> #define func_enter() pr_debug("entering %s\n", __func__);
>
> @@ -354,6 +355,8 @@ struct pktgen_dev {
> /* IMIX */
> unsigned int n_imix_entries;
> struct imix_pkt imix_entries[MAX_IMIX_ENTRIES];
> + /* Maps 0-IMIX_PRECISION range to imix_entry based on probability*/
> + __u8 imix_distribution[IMIX_PRECISION];
>
> /* MPLS */
> unsigned int nr_labels; /* Depth of stack, 0 = no MPLS */
> @@ -483,6 +486,7 @@ static void pktgen_stop_all_threads(struct pktgen_net *pn);
>
> static void pktgen_stop(struct pktgen_thread *t);
> static void pktgen_clear_counters(struct pktgen_dev *pkt_dev);
> +static void fill_imix_distribution(struct pktgen_dev *pkt_dev);
Linux next 20210813 tag arm builds failed due to following build errors.
Regressions found on arm:
- build/gcc-10-ixp4xx_defconfig
- build/gcc-10-orion5x_defconfig
- build/gcc-10-multi_v5_defconfig
net/core/pktgen.c:489:13: warning: 'fill_imix_distribution' used but
never defined
static void fill_imix_distribution(struct pktgen_dev *pkt_dev);
^~~~~~~~~~~~~~~~~~~~~~
ERROR: modpost: "fill_imix_distribution" [net/core/pktgen.ko] undefined!
make[2]: *** [scripts/Makefile.modpost:150: modules-only.symvers] Error 1
make[2]: *** Deleting file 'modules-only.symvers'
make[2]: Target '__modpost' not remade because of errors.
make[1]: *** [Makefile:1918: modules] Error 2
Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org>
Steps to reproduce:
# TuxMake is a command line tool and Python library that provides
# portable and repeatable Linux kernel builds across a variety of
# architectures, toolchains, kernel configurations, and make targets.
#
# TuxMake supports the concept of runtimes.
# See https://docs.tuxmake.org/runtimes/, for that to work it requires
# that you install podman or docker on your system.
#
# To install tuxmake on your system globally:
# sudo pip3 install -U tuxmake
#
# See https://docs.tuxmake.org/ for complete documentation.
tuxmake --runtime podman --target-arch arm --toolchain gcc-10
--kconfig orion5x_defconfig
--
Linaro LKFT
https://lkft.linaro.org