On Fri, 9 Oct 2020 at 19:24, Naresh Kamboju naresh.kamboju@linaro.org wrote:
On Thu, 24 Sep 2020 at 15:26, Joerg Roedel joro@8bytes.org wrote:
On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
Yes, the issue was introduced by one of the changes in "dma-mapping: introduce DMA range map, supplanting dma_pfn_offset", so it only existed in the dma-mapping/for-next branch anyway.
FYI, The reported problem still exists on 5.9.0-rc8-next-20201009.
[ 1.843814] Driver must set ecc.strength when using hardware ECC [ 1.849847] WARNING: CPU: 4 PID: 1 at drivers/mtd/nand/raw/nand_base.c:5687 nand_scan_with_ids+0x1450/0x1470 [ 1.859676] Modules linked in: [ 1.862730] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc8-next-20201009 #1 [ 1.870125] Hardware name: Freescale Layerscape 2088A RDB Board (DT) [ 1.876478] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 1.882483] pc : nand_scan_with_ids+0x1450/0x1470 [ 1.887183] lr : nand_scan_with_ids+0x1450/0x1470
full test log, https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20201009/tes...
Okay, alright then.
- Naresh