While booting arm KASAN config enabled kernel on TI x15 device Linux version 5.10.0-rc3-next-20201116.
The reported issue is not a regression since we have recently started testing arm+kasan builds on LKFT.
The boot was not successful on x15 and qemu_arm for some other reason. The kernel config and crash log attached to this email.
[ 13.071906] BUG: KASAN: slab-out-of-bounds in memcmp+0x30/0x5c [ 13.077526] Synopsys Designware Multimedia Card Interface Driver [ 13.077781] Read of size 1 at addr c5ae1d90 by task kworker/0:0/5 [ 13.089918] [ 13.091433] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.0-rc3-next-20201116 #2 [ 13.093605] sdhci-pltfm: SDHCI platform and OF driver helper [ 13.099135] Hardware name: Generic DRA74X (Flattened Device Tree) [ 13.110942] Workqueue: events dbs_work_handler [ 13.115442] [<c0315abc>] (unwind_backtrace) from [<c030ebf8>] (show_stack+0x10/0x14) [ 13.123240] [<c030ebf8>] (show_stack) from [<c16c91cc>] (dump_stack+0xc8/0xe0) [ 13.130518] [<c16c91cc>] (dump_stack) from [<c051b4ec>] (print_address_description.constprop.0+0x34/0x2dc) [ 13.140238] [<c051b4ec>] (print_address_description.constprop.0) from [<c051b9e0>] (kasan_report+0x1a8/0x1c4) [ 13.145871] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22) [ 13.150221] [<c051b9e0>] (kasan_report) from [<c0997704>] (memcmp+0x30/0x5c) [ 13.159064] sdhci-omap 4809c000.mmc: Got CD GPIO [ 13.166123] [<c0997704>] (memcmp) from [<c0c33694>] (ti_abb_set_voltage_sel+0x94/0x58c) [ 13.166150] [<c0c33694>] (ti_abb_set_voltage_sel) from [<c0c0f0f8>] (_regulator_call_set_voltage_sel+0xd8/0x12c) [ 13.173027] sdhci-omap 4809c000.mmc: supply vqmmc not found, using dummy regulator [ 13.178825] [<c0c0f0f8>] (_regulator_call_set_voltage_sel) from [<c0c0f654>] (_regulator_do_set_voltage+0x508/0x644) [ 13.207208] [<c0c0f654>] (_regulator_do_set_voltage) from [<c0c18558>] (regulator_set_voltage_rdev+0xc4/0x2fc) [ 13.217276] [<c0c18558>] (regulator_set_voltage_rdev) from [<c0c14928>] (regulator_do_balance_voltage+0x304/0x658) [ 13.227692] [<c0c14928>] (regulator_do_balance_voltage) from [<c0c1839c>] (regulator_set_voltage_unlocked+0x1ac/0x2a4) [ 13.238455] [<c0c1839c>] (regulator_set_voltage_unlocked) from [<c0c18834>] (regulator_set_voltage+0xa4/0xfc) [ 13.248437] [<c0c18834>] (regulator_set_voltage) from [<c1316458>] (_opp_set_voltage+0x8c/0x13c) [ 13.257283] [<c1316458>] (_opp_set_voltage) from [<c13167ac>] (ti_opp_supply_set_opp+0x2a4/0x330) [ 13.266216] [<c13167ac>] (ti_opp_supply_set_opp) from [<c1311a98>] (dev_pm_opp_set_rate+0x274/0x7cc) [ 13.275411] [<c1311a98>] (dev_pm_opp_set_rate) from [<c13188b8>] (__cpufreq_driver_target+0x2fc/0x8fc) [ 13.284779] [<c13188b8>] (__cpufreq_driver_target) from [<c131dfac>] (od_dbs_update+0x22c/0x294) [ 13.293623] [<c131dfac>] (od_dbs_update) from [<c131f484>] (dbs_work_handler+0x44/0x88) [ 13.301683] [<c131f484>] (dbs_work_handler) from [<c038159c>] (process_one_work+0x410/0x7ac) [ 13.310174] [<c038159c>] (process_one_work) from [<c0381998>] (worker_thread+0x60/0x8d0) [ 13.318320] [<c0381998>] (worker_thread) from [<c038c2d4>] (kthread+0x258/0x268) [ 13.325769] [<c038c2d4>] (kthread) from [<c03001b0>] (ret_from_fork+0x14/0x24) [ 13.333031] Exception stack(0xc3937fb0 to 0xc3937ff8) [ 13.338117] 7fa0: 00000000 00000000 00000000 00000000 [ 13.346346] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 13.354573] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 13.361223] [ 13.362729] Allocated by task 1: [ 13.365987] ____kasan_kmalloc.constprop.0+0x90/0xa4 [ 13.370986] __kmalloc_track_caller+0x184/0x5e0 [ 13.375550] devres_alloc_node+0x24/0x64 [ 13.379507] __devm_ioremap+0x2c/0xac [ 13.383194] __devm_ioremap_resource+0xe8/0x1b8 [ 13.387758] ti_abb_probe+0x298/0xeb4 [ 13.391447] platform_drv_probe+0x60/0xb8 [ 13.395490] really_probe+0x170/0x70c [ 13.399182] driver_probe_device+0x94/0x254 [ 13.403394] device_driver_attach+0x84/0x8c [ 13.407608] __driver_attach+0xd4/0x18c [ 13.411471] bus_for_each_dev+0xf0/0x144 [ 13.415424] bus_add_driver+0x248/0x2dc [ 13.419289] driver_register+0xcc/0x1a0 [ 13.423151] do_one_initcall+0xb4/0x248 [ 13.427019] kernel_init_freeable+0x1ec/0x244 [ 13.431409] kernel_init+0x8/0x128 [ 13.434836] ret_from_fork+0x14/0x24 [ 13.438434] 0x0 [ 13.440286] [ 13.441793] The buggy address belongs to the object at c5ae1d00 [ 13.441793] which belongs to the cache kmalloc-128 of size 128 [ 13.453682] The buggy address is located 16 bytes to the right of [ 13.453682] 128-byte region [c5ae1d00, c5ae1d80) [ 13.464516] The buggy address belongs to the page: [ 13.469343] page:52ce07bb refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x85ae1 [ 13.477304] flags: 0x200(slab) [ 13.480392] raw: 00000200 00000100 00000122 c3801d00 00000000 00100010 ffffffff 00000001 [ 13.488526] raw: 00000000 [ 13.491163] page dumped because: kasan: bad access detected [ 13.496764] [ 13.498266] Memory state around the buggy address: [ 13.503086] c5ae1c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 13.509652] c5ae1d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 13.516218] >c5ae1d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 13.522780] ^ [ 13.525855] c5ae1e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 13.532422] c5ae1e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 13.538983] ================================================================== [ 13.546242] Disabling lock debugging due to kernel taint
full test log link, https://lkft.validation.linaro.org/scheduler/job/1944986#L2188
metadata: git branch: master git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next git describe: next-20201116 make_kernelversion: 5.10.0-rc3 kernel-config: https://builds.tuxbuild.com/1kMYEMmo35DocMgHZ9AtJReL3rN/config