next: BUG: kernel NULL pointer dereference, address: 0000000000000008 - RIP: 0010:do_wp_page
Linux next tag 20230113 boot failed on x86_64, arm64, arm and i386.
Good: next-20230112 Bad: next-20230113
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
[ 0.000000] Linux version 6.2.0-rc3-next-20230113 (tuxmake@tuxmake) (x86_64-linux-gnu-gcc (Debian 11.3.0-8) 11.3.0, GNU ld (GNU Binutils for Debian) 2.39) #1 SMP PREEMPT_DYNAMIC @1673583678 ... [ 15.743593] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 15.750037] x86/mm: Checking user space page tables [ 15.799837] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 15.806286] Run /sbin/init as init process [ 15.945626] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 15.952588] #PF: supervisor read access in kernel mode [ 15.957720] #PF: error_code(0x0000) - not-present page [ 15.962850] PGD 8000000103213067 P4D 8000000103213067 PUD 103212067 PMD 0 [ 15.969724] Oops: 0000 [#1] PREEMPT SMP PTI [ 15.973909] CPU: 3 PID: 1 Comm: init Not tainted 6.2.0-rc3-next-20230113 #1 [ 15.980869] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 15.988336] RIP: 0010:do_wp_page+0x236/0xef0 [ 15.992611] Code: 83 ea 01 49 89 d7 48 85 d2 0f 85 00 ff ff ff 49 8b 7c 24 60 e8 0b f2 e9 00 41 8b 44 24 28 4d 8b 74 24 50 4d 8b 2c 24 89 45 88 <49> 8b 46 08 49 8b 5d 10 a8 01 0f 85 78 02 00 00 0f 1f 44 00 00 4c [ 16.011356] RSP: 0000:ffffb3f640027d18 EFLAGS: 00010286 [ 16.016583] RAX: 0000000000000a55 RBX: 0400000000000080 RCX: 0000000000000000 [ 16.023715] RDX: 0000000000000000 RSI: ffffffff8d3d2bd5 RDI: ffffffff8e271dfa [ 16.030838] RBP: ffffb3f640027db0 R08: 8000000432ee9225 R09: ffff8ac3431e3100 [ 16.037962] R10: 0000000000000000 R11: 00007fe169f2f598 R12: ffffb3f640027de0 [ 16.045087] R13: ffff8ac3431e2000 R14: 0000000000000000 R15: 0400000000000000 [ 16.052211] FS: 00007fe16973e800(0000) GS:ffff8ac69fd80000(0000) knlGS:0000000000000000 [ 16.060319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.066060] CR2: 0000000000000008 CR3: 00000001008d4002 CR4: 00000000003706e0 [ 16.073183] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.080322] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.087446] Call Trace: [ 16.089893] <TASK> [ 16.091991] ? trace_preempt_off+0x2d/0xd0 [ 16.096087] ? __handle_mm_fault+0x7ee/0x12f0 [ 16.100439] __handle_mm_fault+0xabf/0x12f0 [ 16.104617] handle_mm_fault+0xf8/0x320 [ 16.108457] do_user_addr_fault+0x1d9/0x650 [ 16.112642] exc_page_fault+0x6b/0x170 [ 16.116394] asm_exc_page_fault+0x2b/0x30 [ 16.120408] RIP: 0033:0x7fe169dbf31e [ 16.123986] Code: ba ff ff ff ff 0f 9f c0 0f b6 c0 0f 4c c2 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 41 54 31 c0 ba ff ff ff ff 53 48 83 ec 08 <f0> 0f b1 15 72 02 17 00 83 f8 ff 74 35 41 89 c4 85 c0 75 21 31 c0 [ 16.142724] RSP: 002b:00007ffcd0edec80 EFLAGS: 00010202 [ 16.147948] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000555bd8 [ 16.155074] RDX: 00000000ffffffff RSI: 00007ffcd0edefa8 RDI: 0000000000000001 [ 16.162198] RBP: 00007ffcd0edefa8 R08: 00007fe169bc5a10 R09: 00007fe169f37a10 [ 16.169319] R10: 00007fe169adf3ee R11: 0000000000000246 R12: 00007ffcd0edefa8 [ 16.176445] R13: 000000000041b9a0 R14: 0000000000555bd8 R15: 00007fe169f69000 [ 16.183569] </TASK> [ 16.185752] Modules linked in: [ 16.188803] CR2: 0000000000000008 [ 16.192114] ---[ end trace 0000000000000000 ]--- [ 16.196723] RIP: 0010:do_wp_page+0x236/0xef0 [ 16.200986] Code: 83 ea 01 49 89 d7 48 85 d2 0f 85 00 ff ff ff 49 8b 7c 24 60 e8 0b f2 e9 00 41 8b 44 24 28 4d 8b 74 24 50 4d 8b 2c 24 89 45 88 <49> 8b 46 08 49 8b 5d 10 a8 01 0f 85 78 02 00 00 0f 1f 44 00 00 4c [ 16.219724] RSP: 0000:ffffb3f640027d18 EFLAGS: 00010286 [ 16.224943] RAX: 0000000000000a55 RBX: 0400000000000080 RCX: 0000000000000000 [ 16.232065] RDX: 0000000000000000 RSI: ffffffff8d3d2bd5 RDI: ffffffff8e271dfa [ 16.239197] RBP: ffffb3f640027db0 R08: 8000000432ee9225 R09: ffff8ac3431e3100 [ 16.246324] R10: 0000000000000000 R11: 00007fe169f2f598 R12: ffffb3f640027de0 [ 16.253447] R13: ffff8ac3431e2000 R14: 0000000000000000 R15: 0400000000000000 [ 16.260571] FS: 00007fe16973e800(0000) GS:ffff8ac69fd80000(0000) knlGS:0000000000000000 [ 16.268646] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.274384] CR2: 0000000000000008 CR3: 00000001008d4002 CR4: 00000000003706e0 [ 16.281510] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.288641] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]---
test log link, https://lkft.validation.linaro.org/scheduler/job/6053089#L1041
metadata: git_ref: master git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next git_sha: 6b31ffe9c8b9947d6d3552d6e10752fd96d0f80f git_describe: next-20230113 kernel_version: 6.2.0-rc3 kernel-config: https://storage.tuxsuite.com/public/linaro/lkft/builds/2KFwDAHYQ8Mozgm5578uo... build-url: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/pipelines/746141614 artifact-location: https://storage.tuxsuite.com/public/linaro/lkft/builds/2KFwDAHYQ8Mozgm5578uo... toolchain: gcc-11
-- Linaro LKFT https://lkft.linaro.org
On Fri, Jan 13, 2023 at 06:53:01PM +0530, Naresh Kamboju wrote:
Linux next tag 20230113 boot failed on x86_64, arm64, arm and i386.
Why are you still not running these stack dumps through scripts/decode_stacktrace.sh ? That seems like it's much easier for you to do than expecting everybody who might be interested in investigating your reports to pull down enough of the build artifacts to make it work.
Good: next-20230112 Bad: next-20230113
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
[ 0.000000] Linux version 6.2.0-rc3-next-20230113 (tuxmake@tuxmake) (x86_64-linux-gnu-gcc (Debian 11.3.0-8) 11.3.0, GNU ld (GNU Binutils for Debian) 2.39) #1 SMP PREEMPT_DYNAMIC @1673583678 ... [ 15.743593] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 15.750037] x86/mm: Checking user space page tables [ 15.799837] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 15.806286] Run /sbin/init as init process [ 15.945626] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 15.952588] #PF: supervisor read access in kernel mode [ 15.957720] #PF: error_code(0x0000) - not-present page [ 15.962850] PGD 8000000103213067 P4D 8000000103213067 PUD 103212067 PMD 0 [ 15.969724] Oops: 0000 [#1] PREEMPT SMP PTI [ 15.973909] CPU: 3 PID: 1 Comm: init Not tainted 6.2.0-rc3-next-20230113 #1 [ 15.980869] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 15.988336] RIP: 0010:do_wp_page+0x236/0xef0 [ 15.992611] Code: 83 ea 01 49 89 d7 48 85 d2 0f 85 00 ff ff ff 49 8b 7c 24 60 e8 0b f2 e9 00 41 8b 44 24 28 4d 8b 74 24 50 4d 8b 2c 24 89 45 88 <49> 8b 46 08 49 8b 5d 10 a8 01 0f 85 78 02 00 00 0f 1f 44 00 00 4c [ 16.011356] RSP: 0000:ffffb3f640027d18 EFLAGS: 00010286 [ 16.016583] RAX: 0000000000000a55 RBX: 0400000000000080 RCX: 0000000000000000 [ 16.023715] RDX: 0000000000000000 RSI: ffffffff8d3d2bd5 RDI: ffffffff8e271dfa [ 16.030838] RBP: ffffb3f640027db0 R08: 8000000432ee9225 R09: ffff8ac3431e3100 [ 16.037962] R10: 0000000000000000 R11: 00007fe169f2f598 R12: ffffb3f640027de0 [ 16.045087] R13: ffff8ac3431e2000 R14: 0000000000000000 R15: 0400000000000000 [ 16.052211] FS: 00007fe16973e800(0000) GS:ffff8ac69fd80000(0000) knlGS:0000000000000000 [ 16.060319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.066060] CR2: 0000000000000008 CR3: 00000001008d4002 CR4: 00000000003706e0 [ 16.073183] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.080322] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.087446] Call Trace: [ 16.089893] <TASK> [ 16.091991] ? trace_preempt_off+0x2d/0xd0 [ 16.096087] ? __handle_mm_fault+0x7ee/0x12f0 [ 16.100439] __handle_mm_fault+0xabf/0x12f0 [ 16.104617] handle_mm_fault+0xf8/0x320 [ 16.108457] do_user_addr_fault+0x1d9/0x650 [ 16.112642] exc_page_fault+0x6b/0x170 [ 16.116394] asm_exc_page_fault+0x2b/0x30 [ 16.120408] RIP: 0033:0x7fe169dbf31e [ 16.123986] Code: ba ff ff ff ff 0f 9f c0 0f b6 c0 0f 4c c2 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 41 54 31 c0 ba ff ff ff ff 53 48 83 ec 08 <f0> 0f b1 15 72 02 17 00 83 f8 ff 74 35 41 89 c4 85 c0 75 21 31 c0 [ 16.142724] RSP: 002b:00007ffcd0edec80 EFLAGS: 00010202 [ 16.147948] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000555bd8 [ 16.155074] RDX: 00000000ffffffff RSI: 00007ffcd0edefa8 RDI: 0000000000000001 [ 16.162198] RBP: 00007ffcd0edefa8 R08: 00007fe169bc5a10 R09: 00007fe169f37a10 [ 16.169319] R10: 00007fe169adf3ee R11: 0000000000000246 R12: 00007ffcd0edefa8 [ 16.176445] R13: 000000000041b9a0 R14: 0000000000555bd8 R15: 00007fe169f69000 [ 16.183569] </TASK> [ 16.185752] Modules linked in: [ 16.188803] CR2: 0000000000000008 [ 16.192114] ---[ end trace 0000000000000000 ]--- [ 16.196723] RIP: 0010:do_wp_page+0x236/0xef0 [ 16.200986] Code: 83 ea 01 49 89 d7 48 85 d2 0f 85 00 ff ff ff 49 8b 7c 24 60 e8 0b f2 e9 00 41 8b 44 24 28 4d 8b 74 24 50 4d 8b 2c 24 89 45 88 <49> 8b 46 08 49 8b 5d 10 a8 01 0f 85 78 02 00 00 0f 1f 44 00 00 4c [ 16.219724] RSP: 0000:ffffb3f640027d18 EFLAGS: 00010286 [ 16.224943] RAX: 0000000000000a55 RBX: 0400000000000080 RCX: 0000000000000000 [ 16.232065] RDX: 0000000000000000 RSI: ffffffff8d3d2bd5 RDI: ffffffff8e271dfa [ 16.239197] RBP: ffffb3f640027db0 R08: 8000000432ee9225 R09: ffff8ac3431e3100 [ 16.246324] R10: 0000000000000000 R11: 00007fe169f2f598 R12: ffffb3f640027de0 [ 16.253447] R13: ffff8ac3431e2000 R14: 0000000000000000 R15: 0400000000000000 [ 16.260571] FS: 00007fe16973e800(0000) GS:ffff8ac69fd80000(0000) knlGS:0000000000000000 [ 16.268646] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.274384] CR2: 0000000000000008 CR3: 00000001008d4002 CR4: 00000000003706e0 [ 16.281510] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.288641] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]---
test log link, https://lkft.validation.linaro.org/scheduler/job/6053089#L1041
metadata: git_ref: master git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next git_sha: 6b31ffe9c8b9947d6d3552d6e10752fd96d0f80f git_describe: next-20230113 kernel_version: 6.2.0-rc3 kernel-config: https://storage.tuxsuite.com/public/linaro/lkft/builds/2KFwDAHYQ8Mozgm5578uo... build-url: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/pipelines/746141614 artifact-location: https://storage.tuxsuite.com/public/linaro/lkft/builds/2KFwDAHYQ8Mozgm5578uo... toolchain: gcc-11
-- Linaro LKFT https://lkft.linaro.org
2023-01-13T04:28:24 lava-dispatcher, installed at version: 2022.11.1 2023-01-13T04:28:24 start: 0 validate 2023-01-13T04:28:24 Start time: 2023-01-13 04:28:24.323888+00:00 (UTC) 2023-01-13T04:28:24 Using caching service: 'http://lkft-cache.lkftlab/api/v1/fetch?url=%s' 2023-01-13T04:28:24 Validating that http://lkft-cache.lkftlab/api/v1/fetch?url=https%3A%2F%2Fstorage.tuxsuite.co... exists 2023-01-13T04:28:26 Using caching service: 'http://lkft-cache.lkftlab/api/v1/fetch?url=%s' 2023-01-13T04:28:26 Validating that http://lkft-cache.lkftlab/api/v1/fetch?url=https%3A%2F%2Fstorage.tuxsuite.co... exists 2023-01-13T04:28:26 Using caching service: 'http://lkft-cache.lkftlab/api/v1/fetch?url=%s' 2023-01-13T04:28:26 Validating that http://lkft-cache.lkftlab/api/v1/fetch?url=https%3A%2F%2Fstorage.tuxsuite.co... exists 2023-01-13T04:28:27 validate duration: 3.24 2023-01-13T04:28:27 {'case': 'validate', 'definition': 'lava', 'result': 'pass'} 2023-01-13T04:28:27 start: 1 tftp-deploy (timeout 00:40:00) [common] 2023-01-13T04:28:27 start: 1.1 download-retry (timeout 00:40:00) [common] 2023-01-13T04:28:27 start: 1.1.1 http-download (timeout 00:40:00) [common] 2023-01-13T04:28:27 downloading https://storage.tuxsuite.com/public/linaro/lkft/builds/2KFwDAHYQ8Mozgm5578uo... 2023-01-13T04:28:27 saving as /var/lib/lava/dispatcher/tmp/6053089/tftp-deploy-qytnh1b1/kernel/bzImage 2023-01-13T04:28:27 total size: 14908928 (14MB) 2023-01-13T04:28:27 No compression specified 2023-01-13T04:28:27 progress 0% (0MB) 2023-01-13T04:28:27 progress 5% (0MB) 2023-01-13T04:28:27 progress 10% (1MB) 2023-01-13T04:28:27 progress 15% (2MB) 2023-01-13T04:28:27 progress 20% (2MB) 2023-01-13T04:28:27 progress 25% (3MB) 2023-01-13T04:28:27 progress 30% (4MB) 2023-01-13T04:28:27 progress 35% (5MB) 2023-01-13T04:28:27 progress 40% (5MB) 2023-01-13T04:28:27 progress 45% (6MB) 2023-01-13T04:28:27 progress 50% (7MB) 2023-01-13T04:28:27 progress 55% (7MB) 2023-01-13T04:28:27 progress 60% (8MB) 2023-01-13T04:28:27 progress 65% (9MB) 2023-01-13T04:28:27 progress 70% (9MB) 2023-01-13T04:28:27 progress 75% (10MB) 2023-01-13T04:28:27 progress 80% (11MB) 2023-01-13T04:28:27 progress 85% (12MB) 2023-01-13T04:28:27 progress 90% (12MB) 2023-01-13T04:28:27 progress 95% (13MB) 2023-01-13T04:28:27 progress 100% (14MB) 2023-01-13T04:28:27 14MB downloaded in 0.21s (66.42MB/s) 2023-01-13T04:28:27 end: 1.1.1 http-download (duration 00:00:00) [common] 2023-01-13T04:28:27 {'case': 'http-download', 'definition': 'lava', 'duration': '0.22', 'extra': {'label': 'kernel', 'md5sum': '88bdc1409ad92956d9fa2f61086fd351', 'sha256sum': '4dac414ad5261b00908293452994a8d7b8647bcd10abedcaa4f3a401f96a69ad', 'sha512sum': '53105c34aed4f7b7b847d326c9ad31ef884cc68e09e26e0113a4a62bebb2fd2d3711416d7bf22d4aac265b3eb37e31d95038d5bef3929e315264e681549a7ca4', 'size': 14908928}, 'level': '1.1.1', 'namespace': 'common', 'result': 'pass'} 2023-01-13T04:28:27 end: 1.1 download-retry (duration 00:00:00) [common] 2023-01-13T04:28:27 start: 1.2 download-retry (timeout 00:40:00) [common] 2023-01-13T04:28:27 start: 1.2.1 http-download (timeout 00:40:00) [common] 2023-01-13T04:28:27 downloading https://storage.tuxsuite.com/public/linaro/lkft/oebuilds/2JrJTF7S8iQYtcHKhPM... 2023-01-13T04:28:27 saving as /var/lib/lava/dispatcher/tmp/6053089/tftp-deploy-qytnh1b1/nfsrootfs/lkft-console-image-intel-corei7-64-20230104120429.rootfs.tar 2023-01-13T04:28:27 total size: 452476652 (431MB) 2023-01-13T04:28:27 Using unxz to decompress xz 2023-01-13T04:28:27 progress 0% (0MB) 2023-01-13T04:28:30 progress 5% (21MB) 2023-01-13T04:28:32 progress 10% (43MB) 2023-01-13T04:28:34 progress 15% (64MB) 2023-01-13T04:28:34 progress 20% (86MB) 2023-01-13T04:28:36 progress 25% (107MB) 2023-01-13T04:28:37 progress 30% (129MB) 2023-01-13T04:28:37 progress 35% (151MB) 2023-01-13T04:28:39 progress 40% (172MB) 2023-01-13T04:28:39 progress 45% (194MB) 2023-01-13T04:28:39 progress 50% (215MB) 2023-01-13T04:28:41 progress 55% (237MB) 2023-01-13T04:28:43 progress 60% (258MB) 2023-01-13T04:28:44 progress 65% (280MB) 2023-01-13T04:28:45 progress 70% (302MB) 2023-01-13T04:28:47 progress 75% (323MB) 2023-01-13T04:28:50 progress 80% (345MB) 2023-01-13T04:28:52 progress 85% (366MB) 2023-01-13T04:28:53 progress 90% (388MB) 2023-01-13T04:28:55 progress 95% (409MB) 2023-01-13T04:28:57 progress 100% (431MB) 2023-01-13T04:28:57 431MB downloaded in 29.31s (14.72MB/s) 2023-01-13T04:28:57 end: 1.2.1 http-download (duration 00:00:29) [common] 2023-01-13T04:28:57 {'case': 'http-download', 'definition': 'lava', 'duration': '29.31', 'extra': {'label': 'nfsrootfs', 'md5sum': '753af3e9c15f1a7d3d5481c54a71bb90', 'sha256sum': '78b4eda2b0fb06389fa77b979af00e226c3aaa4a0dc3fa38a39d415e268ea72e', 'sha512sum': '04939458fa8e8c238264cd19922e9c2733a4e17935f1a8d778fbc88d56239d3f9d45064a7780a50e11f32f6c0f6f64c48731a34ab1487ef6151bdea2a82b8123', 'size': 452476652}, 'level': '1.2.1', 'namespace': 'common', 'result': 'pass'} 2023-01-13T04:28:57 end: 1.2 download-retry (duration 00:00:29) [common] 2023-01-13T04:28:57 start: 1.3 download-retry (timeout 00:39:30) [common] 2023-01-13T04:28:57 start: 1.3.1 http-download (timeout 00:39:30) [common] 2023-01-13T04:28:57 downloading https://storage.tuxsuite.com/public/linaro/lkft/builds/2KFwDAHYQ8Mozgm5578uo... 2023-01-13T04:28:57 saving as /var/lib/lava/dispatcher/tmp/6053089/tftp-deploy-qytnh1b1/modules/modules.tar 2023-01-13T04:28:57 total size: 207796 (0MB) 2023-01-13T04:28:57 Using unxz to decompress xz 2023-01-13T04:28:57 progress 15% (0MB) 2023-01-13T04:28:57 progress 31% (0MB) 2023-01-13T04:28:57 progress 47% (0MB) 2023-01-13T04:28:57 progress 63% (0MB) 2023-01-13T04:28:57 progress 78% (0MB) 2023-01-13T04:28:57 progress 94% (0MB) 2023-01-13T04:28:57 progress 100% (0MB) 2023-01-13T04:28:57 0MB downloaded in 0.11s (1.75MB/s) 2023-01-13T04:28:57 end: 1.3.1 http-download (duration 00:00:00) [common] 2023-01-13T04:28:57 {'case': 'http-download', 'definition': 'lava', 'duration': '0.11', 'extra': {'label': 'modules', 'md5sum': '0bc1e0e368e01319a686c964daf6ee1f', 'sha256sum': '1b0d75ef814233446a51d952e8040bebdfd8da6a6365d6213a81dfeeffd6e3d2', 'sha512sum': '3ecb5e778f9b7dc9252a332dcc88ad7bc053ac9270b71a0155442e72c8a4d5bad4e86b9679f15924b51a39183c5c75c3d25c60da46ecb23c126e98d7ceedd287', 'size': 207796}, 'level': '1.3.1', 'namespace': 'common', 'result': 'pass'} 2023-01-13T04:28:57 end: 1.3 download-retry (duration 00:00:00) [common] 2023-01-13T04:28:57 start: 1.4 prepare-tftp-overlay (timeout 00:39:30) [common] 2023-01-13T04:28:57 start: 1.4.1 extract-nfsrootfs (timeout 00:39:30) [common] 2023-01-13T04:29:08 Extracted nfsroot to /var/lib/lava/dispatcher/tmp/6053089/extract-nfsrootfs-bwf2gbp6 2023-01-13T04:29:08 end: 1.4.1 extract-nfsrootfs (duration 00:00:11) [common] 2023-01-13T04:29:08 start: 1.4.2 lava-overlay (timeout 00:39:19) [common] 2023-01-13T04:29:08 [common] Preparing overlay tarball in /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5 2023-01-13T04:29:08 makedir: /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin 2023-01-13T04:29:08 makedir: /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/tests 2023-01-13T04:29:08 makedir: /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/results 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-add-keys 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-add-sources 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-background-process-start 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-background-process-stop 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-common-functions 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-echo-ipv4 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-install-packages 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-installed-packages 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-os-build 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-probe-channel 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-probe-ip 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-target-ip 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-target-mac 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-target-storage 2023-01-13T04:29:08 storage methods: SATA /dev/disk/by-id/ata-TOSHIBA_MG03ACA100_37O9KGL0F 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-test-case 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-test-event 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-test-feedback 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-test-raise 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-test-reference 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-test-runner 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-test-set 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-test-shell 2023-01-13T04:29:08 Updating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-install-packages (oe) 2023-01-13T04:29:08 Updating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/bin/lava-installed-packages (oe) 2023-01-13T04:29:08 Creating /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/environment 2023-01-13T04:29:08 storage_info: 2023-01-13T04:29:08 - LAVA_STORAGE_INFO_0_SATA=/dev/disk/by-id/ata-TOSHIBA_MG03ACA100_37O9KGL0F 2023-01-13T04:29:08 LAVA metadata 2023-01-13T04:29:08 - LAVA_JOB_ID=6053089 2023-01-13T04:29:08 - LAVA_DISPATCHER_IP=10.66.16.124 2023-01-13T04:29:08 start: 1.4.2.1 ssh-authorize (timeout 00:39:19) [common] 2023-01-13T04:29:08 end: 1.4.2.1 ssh-authorize (duration 00:00:00) [common] 2023-01-13T04:29:08 start: 1.4.2.2 lava-vland-overlay (timeout 00:39:19) [common] 2023-01-13T04:29:08 skipped lava-vland-overlay 2023-01-13T04:29:08 end: 1.4.2.2 lava-vland-overlay (duration 00:00:00) [common] 2023-01-13T04:29:08 start: 1.4.2.3 lava-multinode-overlay (timeout 00:39:19) [common] 2023-01-13T04:29:08 skipped lava-multinode-overlay 2023-01-13T04:29:08 end: 1.4.2.3 lava-multinode-overlay (duration 00:00:00) [common] 2023-01-13T04:29:08 start: 1.4.2.4 test-definition (timeout 00:39:19) [common] 2023-01-13T04:29:08 Loading test definitions 2023-01-13T04:29:08 start: 1.4.2.4.1 inline-repo-action (timeout 00:39:19) [common] 2023-01-13T04:29:08 Using /lava-6053089 at stage 0 2023-01-13T04:29:08 uuid=6053089_1.4.2.4.1 testdef=None 2023-01-13T04:29:08 end: 1.4.2.4.1 inline-repo-action (duration 00:00:00) [common] 2023-01-13T04:29:08 start: 1.4.2.4.2 test-overlay (timeout 00:39:19) [common] 2023-01-13T04:29:08 end: 1.4.2.4.2 test-overlay (duration 00:00:00) [common] 2023-01-13T04:29:08 {'case': 'test-overlay', 'definition': 'lava', 'duration': '0.00', 'extra': {'from': 'inline', 'name': 'prep-tmp-disk', 'path': 'inline/prep.yaml', 'uuid': '6053089_1.4.2.4.1'}, 'level': '1.4.2.4.2', 'namespace': 'common', 'result': 'pass'} 2023-01-13T04:29:08 start: 1.4.2.4.3 test-install-overlay (timeout 00:39:19) [common] 2023-01-13T04:29:08 end: 1.4.2.4.3 test-install-overlay (duration 00:00:00) [common] 2023-01-13T04:29:08 {'case': 'test-install-overlay', 'definition': 'lava', 'duration': '0.03', 'extra': {'from': 'inline', 'name': 'prep-tmp-disk', 'path': 'inline/prep.yaml', 'skipped test-install-overlay': '6053089_1.4.2.4.1', 'uuid': '6053089_1.4.2.4.1'}, 'level': '1.4.2.4.3', 'namespace': 'common', 'result': 'pass'} 2023-01-13T04:29:08 start: 1.4.2.4.4 test-runscript-overlay (timeout 00:39:19) [common] 2023-01-13T04:29:08 runner path: /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/0/tests/0_prep-tmp-disk test_uuid 6053089_1.4.2.4.1 2023-01-13T04:29:08 end: 1.4.2.4.4 test-runscript-overlay (duration 00:00:00) [common] 2023-01-13T04:29:08 {'case': 'test-runscript-overlay', 'definition': 'lava', 'duration': '0.00', 'extra': {'filename': '/var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/0/tests/0_prep-tmp-disk/run.sh', 'from': 'inline', 'name': 'prep-tmp-disk', 'path': 'inline/prep.yaml', 'uuid': '6053089_1.4.2.4.1'}, 'level': '1.4.2.4.4', 'namespace': 'common', 'result': 'pass'} 2023-01-13T04:29:08 start: 1.4.2.4.5 git-repo-action (timeout 00:39:19) [common] 2023-01-13T04:29:08 Using /lava-6053089 at stage 1 2023-01-13T04:29:08 Fetching tests from https://github.com/Linaro/test-definitions.git 2023-01-13T04:29:08 Running '/usr/bin/git clone --depth=1 https://github.com/Linaro/test-definitions.git /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/1/tests/1_ltp-smoketest' 2023-01-13T04:29:21 Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/1/tests/1_ltp-smoketest/automated/linux/ltp/ltp.yaml 2023-01-13T04:29:21 uuid=6053089_1.4.2.4.5 testdef=None 2023-01-13T04:29:21 end: 1.4.2.4.5 git-repo-action (duration 00:00:13) [common] 2023-01-13T04:29:21 {'case': 'git-repo-action', 'definition': 'lava', 'duration': '12.85', 'extra': {'commit': '952f6f6d7c3c1137c0511522d8503616baeef078', 'path': 'automated/linux/ltp/ltp.yaml', 'repository': 'https://github.com/Linaro/test-definitions.git%27%7D, 'level': '1.4.2.4.5', 'namespace': 'common', 'result': 'pass'} 2023-01-13T04:29:21 start: 1.4.2.4.6 test-overlay (timeout 00:39:06) [common] 2023-01-13T04:29:21 end: 1.4.2.4.6 test-overlay (duration 00:00:00) [common] 2023-01-13T04:29:21 {'case': 'test-overlay', 'definition': 'lava', 'duration': '0.00', 'extra': {'from': 'git', 'name': 'ltp-smoketest', 'path': 'automated/linux/ltp/ltp.yaml', 'repository': 'https://github.com/Linaro/test-definitions.git', 'uuid': '6053089_1.4.2.4.5'}, 'level': '1.4.2.4.6', 'namespace': 'common', 'result': 'pass'} 2023-01-13T04:29:21 start: 1.4.2.4.7 test-install-overlay (timeout 00:39:06) [common] 2023-01-13T04:29:21 end: 1.4.2.4.7 test-install-overlay (duration 00:00:00) [common] 2023-01-13T04:29:21 {'case': 'test-install-overlay', 'definition': 'lava', 'duration': '0.28', 'extra': {'from': 'git', 'name': 'ltp-smoketest', 'path': 'automated/linux/ltp/ltp.yaml', 'repository': 'https://github.com/Linaro/test-definitions.git', 'skipped test-install-overlay': '6053089_1.4.2.4.5', 'uuid': '6053089_1.4.2.4.5'}, 'level': '1.4.2.4.7', 'namespace': 'common', 'result': 'pass'} 2023-01-13T04:29:21 start: 1.4.2.4.8 test-runscript-overlay (timeout 00:39:06) [common] 2023-01-13T04:29:21 runner path: /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/1/tests/1_ltp-smoketest test_uuid 6053089_1.4.2.4.5 2023-01-13T04:29:21 BOARD='x86' 2023-01-13T04:29:21 BRANCH='default' 2023-01-13T04:29:21 ENVIRONMENT='production' 2023-01-13T04:29:21 LTP_TMPDIR='/scratch' 2023-01-13T04:29:21 SKIPFILE='skipfile-lkft.yaml' 2023-01-13T04:29:21 SKIP_INSTALL='true' 2023-01-13T04:29:21 TIMEOUT_MULTIPLIER='10' 2023-01-13T04:29:21 TST_CMDFILES='smoketest' 2023-01-13T04:29:21 end: 1.4.2.4.8 test-runscript-overlay (duration 00:00:00) [common] 2023-01-13T04:29:21 {'case': 'test-runscript-overlay', 'definition': 'lava', 'duration': '0.11', 'extra': {'filename': '/var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/1/tests/1_ltp-smoketest/run.sh', 'from': 'git', 'name': 'ltp-smoketest', 'path': 'automated/linux/ltp/ltp.yaml', 'repository': 'https://github.com/Linaro/test-definitions.git', 'uuid': '6053089_1.4.2.4.5'}, 'level': '1.4.2.4.8', 'namespace': 'common', 'result': 'pass'} 2023-01-13T04:29:21 Creating lava-test-runner.conf files 2023-01-13T04:29:21 Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/0 for stage 0 2023-01-13T04:29:21 - 0_prep-tmp-disk 2023-01-13T04:29:21 Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/6053089/lava-overlay-n9cz5ml5/lava-6053089/1 for stage 1 2023-01-13T04:29:21 - 1_ltp-smoketest 2023-01-13T04:29:21 end: 1.4.2.4 test-definition (duration 00:00:13) [common] 2023-01-13T04:29:21 start: 1.4.2.5 compress-overlay (timeout 00:39:06) [common] 2023-01-13T04:29:32 end: 1.4.2.5 compress-overlay (duration 00:00:11) [common] 2023-01-13T04:29:32 start: 1.4.2.6 persistent-nfs-overlay (timeout 00:38:55) [common] 2023-01-13T04:29:32 end: 1.4.2.6 persistent-nfs-overlay (duration 00:00:00) [common] 2023-01-13T04:29:32 end: 1.4.2 lava-overlay (duration 00:00:24) [common] 2023-01-13T04:29:32 start: 1.4.3 extract-overlay-ramdisk (timeout 00:38:55) [common] 2023-01-13T04:29:32 end: 1.4.3 extract-overlay-ramdisk (duration 00:00:00) [common] 2023-01-13T04:29:32 start: 1.4.4 extract-modules (timeout 00:38:55) [common] 2023-01-13T04:29:32 extracting modules file /var/lib/lava/dispatcher/tmp/6053089/tftp-deploy-qytnh1b1/modules/modules.tar to /var/lib/lava/dispatcher/tmp/6053089/extract-nfsrootfs-bwf2gbp6 2023-01-13T04:29:32 end: 1.4.4 extract-modules (duration 00:00:00) [common] 2023-01-13T04:29:32 start: 1.4.5 apply-overlay-tftp (timeout 00:38:55) [common] 2023-01-13T04:29:32 [common] Applying overlay to NFS 2023-01-13T04:29:32 [common] Applying overlay /var/lib/lava/dispatcher/tmp/6053089/compress-overlay-p0guf450/overlay-1.4.2.5.tar.gz to directory /var/lib/lava/dispatcher/tmp/6053089/extract-nfsrootfs-bwf2gbp6 2023-01-13T04:29:33 end: 1.4.5 apply-overlay-tftp (duration 00:00:01) [common] 2023-01-13T04:29:33 start: 1.4.6 configure-preseed-file (timeout 00:38:54) [common] 2023-01-13T04:29:33 end: 1.4.6 configure-preseed-file (duration 00:00:00) [common] 2023-01-13T04:29:33 start: 1.4.7 compress-ramdisk (timeout 00:38:54) [common] 2023-01-13T04:29:33 end: 1.4.7 compress-ramdisk (duration 00:00:00) [common] 2023-01-13T04:29:33 end: 1.4 prepare-tftp-overlay (duration 00:00:36) [common] 2023-01-13T04:29:33 start: 1.5 lxc-create-udev-rule-action (timeout 00:38:54) [common] 2023-01-13T04:29:33 No LXC device requested 2023-01-13T04:29:33 end: 1.5 lxc-create-udev-rule-action (duration 00:00:00) [common] 2023-01-13T04:29:33 start: 1.6 deploy-device-env (timeout 00:38:54) [common] 2023-01-13T04:29:33 end: 1.6 deploy-device-env (duration 00:00:00) [common] 2023-01-13T04:29:33 Checking files for TFTP limit of 4294967296 bytes. 2023-01-13T04:29:33 end: 1 tftp-deploy (duration 00:01:06) [common] 2023-01-13T04:29:33 start: 2 bootloader-action (timeout 00:15:00) [common] 2023-01-13T04:29:33 start: 2.1 bootloader-overlay (timeout 00:15:00) [common] 2023-01-13T04:29:33 substitutions: 2023-01-13T04:29:33 - {DTB}: None 2023-01-13T04:29:33 - {INITRD}: None 2023-01-13T04:29:33 - {KERNEL}: 6053089/tftp-deploy-qytnh1b1/kernel/bzImage 2023-01-13T04:29:33 - {LAVA_MAC}: 00:90:05:af:00:7d 2023-01-13T04:29:33 - {NFSROOTFS}: /var/lib/lava/dispatcher/tmp/6053089/extract-nfsrootfs-bwf2gbp6 2023-01-13T04:29:33 - {NFS_SERVER_IP}: 10.66.16.124 2023-01-13T04:29:33 - {PRESEED_CONFIG}: None 2023-01-13T04:29:33 - {PRESEED_LOCAL}: None 2023-01-13T04:29:33 - {RAMDISK}: None 2023-01-13T04:29:33 - {ROOT_PART}: None 2023-01-13T04:29:33 - {ROOT}: None 2023-01-13T04:29:33 - {SERVER_IP}: 10.66.16.124 2023-01-13T04:29:33 - {TEE}: None 2023-01-13T04:29:33 Parsed boot commands: 2023-01-13T04:29:33 - dhcp net0 2023-01-13T04:29:33 - set console console=ttyS0,115200n8 lava_mac=00:90:05:af:00:7d 2023-01-13T04:29:33 - set extraargs root=/dev/nfs rw nfsroot=10.66.16.124:/var/lib/lava/dispatcher/tmp/6053089/extract-nfsrootfs-bwf2gbp6,tcp,hard,vers=3 ip=dhcp 2023-01-13T04:29:33 - kernel tftp://10.66.16.124/6053089/tftp-deploy-qytnh1b1/kernel/bzImage ${extraargs} ${console} 2023-01-13T04:29:33 - boot 2023-01-13T04:29:33 end: 2.1 bootloader-overlay (duration 00:00:00) [common] 2023-01-13T04:29:33 start: 2.2 connect-device (timeout 00:15:00) [common] 2023-01-13T04:29:33 [common] connect-device Connecting to device using 'telnet serial-box02 7016' 2023-01-13T04:29:33 Setting prompt string to ['lava-test: # '] 2023-01-13T04:29:33 end: 2.2 connect-device (duration 00:00:00) [common] 2023-01-13T04:29:33 start: 2.3 bootloader-retry (timeout 00:15:00) [common] 2023-01-13T04:29:33 start: 2.3.1 reset-device (timeout 00:15:00) [common] 2023-01-13T04:29:33 start: 2.3.1.1 pdu-reboot (timeout 00:15:00) [common] 2023-01-13T04:29:33 Calling: 'nice' 'ipmitool' '-U' 'ADMIN' '-P' 'ADMIN' '-I' 'lanplus' '-H' '10.66.16.51' 'chassis' 'power' 'off' 2023-01-13T04:29:33 >> Chassis Power Control: Down/Off 2023-01-13T04:29:33 Returned 0 in 0 seconds 2023-01-13T04:29:33 Calling: 'nice' 'sleep' '5' 2023-01-13T04:29:38 Returned 0 in 5 seconds 2023-01-13T04:29:38 Calling: 'nice' 'ipmitool' '-U' 'ADMIN' '-P' 'ADMIN' '-I' 'lanplus' '-H' '10.66.16.51' 'chassis' 'power' 'on' 2023-01-13T04:29:38 >> Chassis Power Control: Up/On 2023-01-13T04:29:38 Returned 0 in 0 seconds 2023-01-13T04:29:38 end: 2.3.1.1 pdu-reboot (duration 00:00:05) [common] 2023-01-13T04:29:38 {'case': 'pdu-reboot', 'definition': 'lava', 'duration': '5.37', 'extra': {'status': 'success'}, 'level': '2.3.1.1', 'namespace': 'common', 'result': 'pass'} 2023-01-13T04:29:38 end: 2.3.1 reset-device (duration 00:00:05) [common] 2023-01-13T04:29:38 start: 2.3.2 bootloader-interrupt (timeout 00:14:55) [common] 2023-01-13T04:29:38 Setting prompt string to ['Press Ctrl-B for the iPXE command line'] 2023-01-13T04:29:38 bootloader-interrupt: Wait for prompt ['Press Ctrl-B for the iPXE command line'] (timeout 00:15:00) 2023-01-13T04:29:38 Trying 10.66.16.132... 2023-01-13T04:29:38 Connected to serial-box02.lkftlab. 2023-01-13T04:29:38 Escape character is '^]'. 2023-01-13T04:29:38 2023-01-13T04:29:38 lkft x86 01 7016 [115200 N81] 2023-01-13T04:29:38 2023-01-13T04:30:28 iPXE initialising devices...ok 2023-01-13T04:30:28 [0m 2023-01-13T04:30:28 2023-01-13T04:30:28 2023-01-13T04:30:28 [1miPXE 1.20.1+ (ge3ca)[0m -- Open Source Network Boot Firmware -- [36mhttp://ipxe.org%5B0m 2023-01-13T04:30:28 Features: DNS HTTP iSCSI TFTP SRP AoE ELF MBOOT PXE bzImage Menu PXEXT 2023-01-13T04:30:28 2023-01-13T04:30:28 b 2023-01-13T04:30:28 end: 2.3.2 bootloader-interrupt (duration 00:00:50) [common] 2023-01-13T04:30:28 start: 2.3.3 bootloader-commands (timeout 00:14:05) [common] 2023-01-13T04:30:28 Setting prompt string to ['iPXE>'] 2023-01-13T04:30:28 bootloader-commands: Wait for prompt ['iPXE>'] (timeout 00:14:05) 2023-01-13T04:30:28 Setting prompt string to ['iPXE>', 'No configuration methods succeeded', 'Connection timed out'] 2023-01-13T04:30:28 Sending with 1 millisecond of delay 2023-01-13T04:30:28 dhcp net0 2023-01-13T04:30:29 Press Ctrl-B for the iPXE command line... iPXE> dhcp net0 2023-01-13T04:30:29 bootloader-commands: Wait for prompt ['iPXE>', 'No configuration methods succeeded', 'Connection timed out'] (timeout 00:14:04) 2023-01-13T04:30:29 [?25hdhcp net0 2023-01-13T04:30:32 Configuring (net0 ac:1f:6b:1a:b3:4e)...... ok 2023-01-13T04:30:32 Sending with 1 millisecond of delay 2023-01-13T04:30:32 set console console=ttyS0,115200n8 lava_mac=00:90:05:af:00:7d 2023-01-13T04:30:35 iPXE> [?25hset console console=ttyS0,115200n8 lava_mac=00:90:05:af:00:7d 2023-01-13T04:30:35 bootloader-commands: Wait for prompt ['iPXE>', 'No configuration methods succeeded', 'Connection timed out'] (timeout 00:13:58) 2023-01-13T04:30:35 set console console=ttyS0,115200n8 lava_mac=00:90:05:af:00:7d 2023-01-13T04:30:35 Sending with 1 millisecond of delay 2023-01-13T04:30:35 set extraargs root=/dev/nfs rw nfsroot=10.66.16.124:/var/lib/lava/dispatcher/tmp/6053089/extract-nfsrootfs-bwf2gbp6,tcp,hard,vers=3 ip=dhcp 2023-01-13T04:30:42 iPXE> [?25hset extraargs root=/dev/nfs rw nfsroot=10.66.16.124:/var/lib/lava/dispatcher/tmp/6053089/extract-nfsrootfs-bwf2gbp6,tcp,hard,vers=3 ip=dhcp 2023-01-13T04:30:42 bootloader-commands: Wait for prompt ['iPXE>', 'No configuration methods succeeded', 'Connection timed out'] (timeout 00:13:50) 2023-01-13T04:30:42 set extraargs root=/dev/nfs rw nfsroot=10.66.16.124:/var/lib/lava/dispatcher/tmp/6053089/extract-nfsrootfs-bwf2gbp6,tcp,hard,vers=3 ip=dhcp 2023-01-13T04:30:42 Sending with 1 millisecond of delay 2023-01-13T04:30:42 kernel tftp://10.66.16.124/6053089/tftp-deploy-qytnh1b1/kernel/bzImage ${extraargs} ${console} 2023-01-13T04:30:47 iPXE> [?25hkernel tftp://10.66.16.124/6053089/tftp-deploy-qytnh1b1/kernel/bzImage ${extraargs} ${console} 2023-01-13T04:30:47 bootloader-commands: Wait for prompt ['iPXE>', 'No configuration methods succeeded', 'Connection timed out'] (timeout 00:13:45) 2023-01-13T04:30:47 kernel tftp://10.66.16.124/6053089/tftp-deploy-qytnh1b1/kernel/bzImage ${extraargs} ${console} 2023-01-13T04:30:51 tftp://10.66.16.124/6053089/tftp-deploy-qytnh1b1/kernel/bzImage... 24% 51% 78% ok 2023-01-13T04:30:51 Sending with 1 millisecond of delay 2023-01-13T04:30:51 boot 2023-01-13T04:30:52 iPXE> [?25hboot 2023-01-13T04:30:52 end: 2.3.3 bootloader-commands (duration 00:00:23) [common] 2023-01-13T04:30:52 start: 2.3.4 auto-login-action (timeout 00:13:41) [common] 2023-01-13T04:30:52 Setting prompt string to ['Linux version [0-9]'] 2023-01-13T04:30:52 Setting prompt string to ['Linux version [0-9]', 'No configuration methods succeeded', 'Connection timed out'] 2023-01-13T04:30:52 auto-login-action: Wait for prompt ['Linux version [0-9]', 'No configuration methods succeeded', 'Connection timed out'] (timeout 00:15:00) 2023-01-13T04:30:52 boot 2023-01-13T04:30:52 start: 2.3.4.1 login-action (timeout 00:13:40) [common] 2023-01-13T04:30:52 Setting prompt string to ['-\[ cut here \]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing'] 2023-01-13T04:30:52 Using line separator: #'\n'# 2023-01-13T04:30:52 Waiting for the login prompt 2023-01-13T04:30:52 Parsing kernel messages 2023-01-13T04:30:52 ['-\[ cut here \]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing', 'root@intel-corei7-64:', 'root@(.*):[/~]#', 'login:', 'Login incorrect'] 2023-01-13T04:30:52 [login-action] Waiting for messages, (timeout 00:13:40) 2023-01-13T04:30:52 [ 0.000000] Linux version 6.2.0-rc3-next-20230113 (tuxmake@tuxmake) (x86_64-linux-gnu-gcc (Debian 11.3.0-8) 11.3.0, GNU ld (GNU Binutils for Debian) 2.39) #1 SMP PREEMPT_DYNAMIC @1673583678 2023-01-13T04:30:52 [ 0.000000] Command line: root=/dev/nfs rw nfsroot=10.66.16.124:/var/lib/lava/dispatcher/tmp/6053089/extract-nfsrootfs-bwf2gbp6,tcp,hard,vers=3 ip=dhcp console=ttyS0,115200n8 lava_mac=00:90:05:af:00:7d 2023-01-13T04:30:52 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' 2023-01-13T04:30:52 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' 2023-01-13T04:30:52 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' 2023-01-13T04:30:52 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' 2023-01-13T04:30:52 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' 2023-01-13T04:30:52 [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 2023-01-13T04:30:52 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 2023-01-13T04:30:52 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 2023-01-13T04:30:52 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. 2023-01-13T04:30:52 [ 0.000000] signal: max sigframe size: 2032 2023-01-13T04:30:52 [ 0.000000] BIOS-provided physical RAM map: 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000098bff] usable 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x0000000000098c00-0x000000000009ffff] reserved 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000088766fff] usable 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x0000000088767000-0x0000000088767fff] ACPI NVS 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x0000000088768000-0x0000000088791fff] reserved 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x0000000088792000-0x000000008cba0fff] usable 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x000000008cba1000-0x000000008cf2efff] reserved 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x000000008cf2f000-0x000000008d11efff] usable 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x000000008d11f000-0x000000008d891fff] ACPI NVS 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x000000008d892000-0x000000008fafefff] reserved 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x000000008faff000-0x000000008fafffff] usable 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved 2023-01-13T04:30:52 [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046fffffff] usable 2023-01-13T04:30:52 [ 0.000000] NX (Execute Disable) protection: active 2023-01-13T04:30:52 [ 0.000000] SMBIOS 3.0 present. 2023-01-13T04:30:52 [ 0.000000] DMI: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 2023-01-13T04:30:52 [ 0.000000] tsc: Detected 3000.000 MHz processor 2023-01-13T04:30:52 [ 0.000426] last_pfn = 0x470000 max_arch_pfn = 0x400000000 2023-01-13T04:30:52 [ 0.000429] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT 2023-01-13T04:30:52 [ 0.000658] last_pfn = 0x8fb00 max_arch_pfn = 0x400000000 2023-01-13T04:30:52 [ 0.007494] found SMP MP-table at [mem 0x000fcc10-0x000fcc1f] 2023-01-13T04:30:52 [ 0.007503] Using GB pages for direct mapping 2023-01-13T04:30:52 [ 0.007872] ACPI: Early table checksum verification disabled 2023-01-13T04:30:52 [ 0.007875] ACPI: RSDP 0x00000000000F05B0 000024 (v02 SUPERM) 2023-01-13T04:30:52 [ 0.007878] ACPI: XSDT 0x000000008D8250B0 0000E4 (v01 SUPERM SUPERM 01072009 AMI 00010013) 2023-01-13T04:30:53 [ 0.007883] ACPI: FACP 0x000000008D8479A0 00010C (v05 01072009 AMI 00010013) 2023-01-13T04:30:53 [ 0.007888] ACPI: DSDT 0x000000008D825230 022770 (v02 SUPERM SMCI--MB 01072009 INTL 20120913) 2023-01-13T04:30:53 [ 0.007891] ACPI: FACS 0x000000008D890F80 000040 2023-01-13T04:30:53 [ 0.007893] ACPI: APIC 0x000000008D847AB0 000084 (v03 01072009 AMI 00010013) 2023-01-13T04:30:53 [ 0.007896] ACPI: FPDT 0x000000008D847B38 000044 (v01 01072009 AMI 00010013) 2023-01-13T04:30:53 [ 0.007898] ACPI: FIDT 0x000000008D847B80 00009C (v01 01072009 AMI 00010013) 2023-01-13T04:30:53 [ 0.007901] ACPI: SPMI 0x000000008D847C20 000041 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) 2023-01-13T04:30:53 [ 0.007904] ACPI: MCFG 0x000000008D847C68 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) 2023-01-13T04:30:53 [ 0.007906] ACPI: HPET 0x000000008D847CA8 000038 (v01 SUPERM SMCI--MB 01072009 AMI. 0005000B) 2023-01-13T04:30:53 [ 0.007909] ACPI: LPIT 0x000000008D847CE0 000094 (v01 INTEL GNLR 00000000 MSFT 0000005F) 2023-01-13T04:30:53 [ 0.007911] ACPI: SSDT 0x000000008D847D78 000248 (v02 INTEL sensrhub 00000000 INTL 20120913) 2023-01-13T04:30:53 [ 0.007914] ACPI: SSDT 0x000000008D847FC0 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913) 2023-01-13T04:30:53 [ 0.007917] ACPI: SSDT 0x000000008D84AB70 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913) 2023-01-13T04:30:53 [ 0.007920] ACPI: DBGP 0x000000008D84B758 000034 (v01 INTEL 00000000 MSFT 0000005F) 2023-01-13T04:30:53 [ 0.007922] ACPI: DBG2 0x000000008D84B790 000054 (v00 INTEL 00000000 MSFT 0000005F) 2023-01-13T04:30:53 [ 0.007925] ACPI: SSDT 0x000000008D84B7E8 000615 (v02 INTEL xh_Zumba 00000000 INTL 20120913) 2023-01-13T04:30:53 [ 0.007927] ACPI: PRAD 0x000000008D84BE00 0000CA (v02 PRADID PRADTID 00000001 INTL 20120913) 2023-01-13T04:30:53 [ 0.007930] ACPI: SSDT 0x000000008D84BED0 00547E (v02 SaSsdt SaSsdt 00003000 INTL 20120913) 2023-01-13T04:30:53 [ 0.007933] ACPI: UEFI 0x000000008D851350 000042 (v01 00000000 00000000) 2023-01-13T04:30:53 [ 0.007935] ACPI: SSDT 0x000000008D851398 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) 2023-01-13T04:30:53 [ 0.007938] ACPI: DMAR 0x000000008D852210 000070 (v01 INTEL SKL 00000001 INTL 00000001) 2023-01-13T04:30:53 [ 0.007941] ACPI: SPCR 0x000000008D852280 000050 (v01 A M I APTIO V 01072009 AMI. 0005000B) 2023-01-13T04:30:53 [ 0.007943] ACPI: EINJ 0x000000008D8522D0 000130 (v01 AMI AMI.EINJ 00000000 AMI. 00000000) 2023-01-13T04:30:53 [ 0.007946] ACPI: ERST 0x000000008D852400 000230 (v01 AMIER AMI.ERST 00000000 AMI. 00000000) 2023-01-13T04:30:53 [ 0.007949] ACPI: BERT 0x000000008D852630 000030 (v01 AMI AMI.BERT 00000000 AMI. 00000000) 2023-01-13T04:30:53 [ 0.007951] ACPI: HEST 0x000000008D852660 00027C (v01 AMI AMI.HEST 00000000 AMI. 00000000) 2023-01-13T04:30:53 [ 0.007954] ACPI: Reserving FACP table memory at [mem 0x8d8479a0-0x8d847aab] 2023-01-13T04:30:53 [ 0.007955] ACPI: Reserving DSDT table memory at [mem 0x8d825230-0x8d84799f] 2023-01-13T04:30:53 [ 0.007956] ACPI: Reserving FACS table memory at [mem 0x8d890f80-0x8d890fbf] 2023-01-13T04:30:53 [ 0.007957] ACPI: Reserving APIC table memory at [mem 0x8d847ab0-0x8d847b33] 2023-01-13T04:30:53 [ 0.007957] ACPI: Reserving FPDT table memory at [mem 0x8d847b38-0x8d847b7b] 2023-01-13T04:30:53 [ 0.007958] ACPI: Reserving FIDT table memory at [mem 0x8d847b80-0x8d847c1b] 2023-01-13T04:30:53 [ 0.007959] ACPI: Reserving SPMI table memory at [mem 0x8d847c20-0x8d847c60] 2023-01-13T04:30:53 [ 0.007960] ACPI: Reserving MCFG table memory at [mem 0x8d847c68-0x8d847ca3] 2023-01-13T04:30:53 [ 0.007960] ACPI: Reserving HPET table memory at [mem 0x8d847ca8-0x8d847cdf] 2023-01-13T04:30:53 [ 0.007961] ACPI: Reserving LPIT table memory at [mem 0x8d847ce0-0x8d847d73] 2023-01-13T04:30:53 [ 0.007962] ACPI: Reserving SSDT table memory at [mem 0x8d847d78-0x8d847fbf] 2023-01-13T04:30:53 [ 0.007962] ACPI: Reserving SSDT table memory at [mem 0x8d847fc0-0x8d84ab6d] 2023-01-13T04:30:53 [ 0.007963] ACPI: Reserving SSDT table memory at [mem 0x8d84ab70-0x8d84b752] 2023-01-13T04:30:53 [ 0.007964] ACPI: Reserving DBGP table memory at [mem 0x8d84b758-0x8d84b78b] 2023-01-13T04:30:53 [ 0.007965] ACPI: Reserving DBG2 table memory at [mem 0x8d84b790-0x8d84b7e3] 2023-01-13T04:30:53 [ 0.007965] ACPI: Reserving SSDT table memory at [mem 0x8d84b7e8-0x8d84bdfc] 2023-01-13T04:30:53 [ 0.007966] ACPI: Reserving PRAD table memory at [mem 0x8d84be00-0x8d84bec9] 2023-01-13T04:30:53 [ 0.007967] ACPI: Reserving SSDT table memory at [mem 0x8d84bed0-0x8d85134d] 2023-01-13T04:30:53 [ 0.007968] ACPI: Reserving UEFI table memory at [mem 0x8d851350-0x8d851391] 2023-01-13T04:30:53 [ 0.007968] ACPI: Reserving SSDT table memory at [mem 0x8d851398-0x8d85220a] 2023-01-13T04:30:53 [ 0.007969] ACPI: Reserving DMAR table memory at [mem 0x8d852210-0x8d85227f] 2023-01-13T04:30:53 [ 0.007970] ACPI: Reserving SPCR table memory at [mem 0x8d852280-0x8d8522cf] 2023-01-13T04:30:53 [ 0.007971] ACPI: Reserving EINJ table memory at [mem 0x8d8522d0-0x8d8523ff] 2023-01-13T04:30:53 [ 0.007971] ACPI: Reserving ERST table memory at [mem 0x8d852400-0x8d85262f] 2023-01-13T04:30:53 [ 0.007972] ACPI: Reserving BERT table memory at [mem 0x8d852630-0x8d85265f] 2023-01-13T04:30:53 [ 0.007973] ACPI: Reserving HEST table memory at [mem 0x8d852660-0x8d8528db] 2023-01-13T04:30:53 [ 0.008089] No NUMA configuration found 2023-01-13T04:30:53 [ 0.008089] Faking a node at [mem 0x0000000000000000-0x000000046fffffff] 2023-01-13T04:30:53 [ 0.008092] NODE_DATA(0) allocated [mem 0x46fffc000-0x46fffffff] 2023-01-13T04:30:53 [ 0.008116] Zone ranges: 2023-01-13T04:30:53 [ 0.008117] DMA [mem 0x0000000000001000-0x0000000000ffffff] 2023-01-13T04:30:53 [ 0.008118] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] 2023-01-13T04:30:53 [ 0.008120] Normal [mem 0x0000000100000000-0x000000046fffffff] 2023-01-13T04:30:53 [ 0.008121] Movable zone start for each node 2023-01-13T04:30:53 [ 0.008122] Early memory node ranges 2023-01-13T04:30:53 [ 0.008123] node 0: [mem 0x0000000000001000-0x0000000000097fff] 2023-01-13T04:30:53 [ 0.008124] node 0: [mem 0x0000000000100000-0x0000000088766fff] 2023-01-13T04:30:53 [ 0.008125] node 0: [mem 0x0000000088792000-0x000000008cba0fff] 2023-01-13T04:30:53 [ 0.008126] node 0: [mem 0x000000008cf2f000-0x000000008d11efff] 2023-01-13T04:30:53 [ 0.008126] node 0: [mem 0x000000008faff000-0x000000008fafffff] 2023-01-13T04:30:53 [ 0.008127] node 0: [mem 0x0000000100000000-0x000000046fffffff] 2023-01-13T04:30:53 [ 0.008129] Initmem setup node 0 [mem 0x0000000000001000-0x000000046fffffff] 2023-01-13T04:30:53 [ 0.008132] On node 0, zone DMA: 1 pages in unavailable ranges 2023-01-13T04:30:53 [ 0.008152] On node 0, zone DMA: 104 pages in unavailable ranges 2023-01-13T04:30:53 [ 0.010807] On node 0, zone DMA32: 43 pages in unavailable ranges 2023-01-13T04:30:53 [ 0.010819] On node 0, zone DMA32: 910 pages in unavailable ranges 2023-01-13T04:30:53 [ 0.010899] On node 0, zone DMA32: 10720 pages in unavailable ranges 2023-01-13T04:30:53 [ 0.027654] On node 0, zone Normal: 1280 pages in unavailable ranges 2023-01-13T04:30:53 [ 0.027860] ACPI: PM-Timer IO Port: 0x1808 2023-01-13T04:30:53 [ 0.027865] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) 2023-01-13T04:30:53 [ 0.027866] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) 2023-01-13T04:30:53 [ 0.027867] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) 2023-01-13T04:30:53 [ 0.027868] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) 2023-01-13T04:30:53 [ 0.027904] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 2023-01-13T04:30:53 [ 0.027906] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 2023-01-13T04:30:53 [ 0.027908] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) 2023-01-13T04:30:53 [ 0.027912] ACPI: Using ACPI (MADT) for SMP configuration information 2023-01-13T04:30:53 [ 0.027913] ACPI: HPET id: 0x8086a701 base: 0xfed00000 2023-01-13T04:30:53 [ 0.027915] ACPI: SPCR: SPCR table version 1 2023-01-13T04:30:53 [ 0.027916] ACPI: SPCR: console: uart,io,0x3f8,115200 2023-01-13T04:30:53 [ 0.027918] TSC deadline timer available 2023-01-13T04:30:53 [ 0.027918] smpboot: Allowing 4 CPUs, 0 hotplug CPUs 2023-01-13T04:30:53 [ 0.027931] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] 2023-01-13T04:30:53 [ 0.027933] PM: hibernation: Registered nosave memory: [mem 0x00098000-0x00098fff] 2023-01-13T04:30:53 [ 0.027934] PM: hibernation: Registered nosave memory: [mem 0x00099000-0x0009ffff] 2023-01-13T04:30:53 [ 0.027935] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] 2023-01-13T04:30:53 [ 0.027935] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] 2023-01-13T04:30:53 [ 0.027937] PM: hibernation: Registered nosave memory: [mem 0x88767000-0x88767fff] 2023-01-13T04:30:53 [ 0.027937] PM: hibernation: Registered nosave memory: [mem 0x88768000-0x88791fff] 2023-01-13T04:30:53 [ 0.027939] PM: hibernation: Registered nosave memory: [mem 0x8cba1000-0x8cf2efff] 2023-01-13T04:30:53 [ 0.027940] PM: hibernation: Registered nosave memory: [mem 0x8d11f000-0x8d891fff] 2023-01-13T04:30:53 [ 0.027941] PM: hibernation: Registered nosave memory: [mem 0x8d892000-0x8fafefff] 2023-01-13T04:30:53 [ 0.027942] PM: hibernation: Registered nosave memory: [mem 0x8fb00000-0xdfffffff] 2023-01-13T04:30:53 [ 0.027942] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] 2023-01-13T04:30:53 [ 0.027943] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff] 2023-01-13T04:30:53 [ 0.027944] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] 2023-01-13T04:30:53 [ 0.027944] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] 2023-01-13T04:30:53 [ 0.027945] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] 2023-01-13T04:30:53 [ 0.027946] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff] 2023-01-13T04:30:53 [ 0.027946] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] 2023-01-13T04:30:53 [ 0.027947] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] 2023-01-13T04:30:53 [ 0.027947] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] 2023-01-13T04:30:53 [ 0.027949] [mem 0x8fb00000-0xdfffffff] available for PCI devices 2023-01-13T04:30:53 [ 0.027950] Booting paravirtualized kernel on bare hardware 2023-01-13T04:30:53 [ 0.027952] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns 2023-01-13T04:30:53 [ 0.027956] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 2023-01-13T04:30:53 [ 0.028070] percpu: Embedded 54 pages/cpu s183912 r8192 d29080 u524288 2023-01-13T04:30:53 [ 0.028093] Fallback order for Node 0: 0 2023-01-13T04:30:53 [ 0.028096] Built 1 zonelists, mobility grouping on. Total pages: 4115761 2023-01-13T04:30:53 [ 0.028097] Policy zone: Normal 2023-01-13T04:30:53 [ 0.028098] Kernel command line: root=/dev/nfs rw nfsroot=10.66.16.124:/var/lib/lava/dispatcher/tmp/6053089/extract-nfsrootfs-bwf2gbp6,tcp,hard,vers=3 ip=dhcp console=ttyS0,115200n8 lava_mac=00:90:05:af:00:7d 2023-01-13T04:30:53 [ 0.028142] Unknown kernel command line parameters "lava_mac=00:90:05:af:00:7d", will be passed to user space. 2023-01-13T04:30:53 [ 0.028159] random: crng init done 2023-01-13T04:30:53 [ 0.028837] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) 2023-01-13T04:30:53 [ 0.029167] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) 2023-01-13T04:30:53 [ 0.029302] mem auto-init: stack:off, heap alloc:off, heap free:off 2023-01-13T04:30:53 [ 0.029310] software IO TLB: area num 4. 2023-01-13T04:30:53 [ 0.062285] Memory: 16329104K/16724984K available (22528K kernel code, 3246K rwdata, 8020K rodata, 3624K init, 1116K bss, 395620K reserved, 0K cma-reserved) 2023-01-13T04:30:53 [ 0.062327] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 2023-01-13T04:30:53 [ 0.062334] Kernel/User page tables isolation: enabled 2023-01-13T04:30:53 [ 0.062355] ftrace: allocating 57338 entries in 224 pages 2023-01-13T04:30:53 [ 0.071374] ftrace: allocated 224 pages with 3 groups 2023-01-13T04:30:53 [ 0.072400] Dynamic Preempt: voluntary 2023-01-13T04:30:53 [ 0.072422] rcu: Preemptible hierarchical RCU implementation. 2023-01-13T04:30:53 [ 0.072422] rcu: RCU event tracing is enabled. 2023-01-13T04:30:53 [ 0.072423] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. 2023-01-13T04:30:53 [ 0.072424] Trampoline variant of Tasks RCU enabled. 2023-01-13T04:30:53 [ 0.072424] Rude variant of Tasks RCU enabled. 2023-01-13T04:30:53 [ 0.072425] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. 2023-01-13T04:30:53 [ 0.072426] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 2023-01-13T04:30:53 [ 0.073833] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 2023-01-13T04:30:53 [ 0.074043] rcu: srcu_init: Setting srcu_struct sizes based on contention. 2023-01-13T04:30:53 [ 0.074251] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) 2023-01-13T04:30:53 [ 0.076620] Console: colour VGA+ 80x25 2023-01-13T04:30:53 [ 0.076641] printk: console [ttyS0] enabled 2023-01-13T04:30:53 [ 1.346444] ACPI: Core revision 20221020 2023-01-13T04:30:53 [ 1.350613] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns 2023-01-13T04:30:53 [ 1.359749] APIC: Switch to symmetric I/O mode setup 2023-01-13T04:30:54 [ 1.365553] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 2023-01-13T04:30:54 [ 1.375697] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b3e459bf4c, max_idle_ns: 440795289890 ns 2023-01-13T04:30:54 [ 1.386215] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.00 BogoMIPS (lpj=3000000) 2023-01-13T04:30:54 [ 1.387214] pid_max: default: 32768 minimum: 301 2023-01-13T04:30:54 [ 1.388228] LSM: initializing lsm=capability,integrity,selinux 2023-01-13T04:30:54 [ 1.389217] SELinux: Initializing. 2023-01-13T04:30:54 [ 1.390252] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) 2023-01-13T04:30:54 [ 1.391234] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) 2023-01-13T04:30:54 [ 1.392379] CPU0: Thermal monitoring enabled (TM1) 2023-01-13T04:30:54 [ 1.393241] process: using mwait in idle threads 2023-01-13T04:30:54 [ 1.394215] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8 2023-01-13T04:30:54 [ 1.395214] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 2023-01-13T04:30:54 [ 1.396216] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization 2023-01-13T04:30:54 [ 1.397214] Spectre V2 : Mitigation: Retpolines 2023-01-13T04:30:54 [ 1.398214] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch 2023-01-13T04:30:54 [ 1.399214] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT 2023-01-13T04:30:54 Matched prompt #6: WARNING: 2023-01-13T04:30:54 Setting prompt string to ['end trace[^\r]*\r\n', 'root@intel-corei7-64:', 'root@(.*):[/~]#', 'login:', 'Login incorrect'] 2023-01-13T04:30:54 [ 1.400214] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible! 2023-01-13T04:30:54 [ 1.401214] RETBleed: Vulnerable 2023-01-13T04:30:54 [ 1.402214] Speculative Store Bypass: Vulnerable 2023-01-13T04:30:54 [ 1.403220] MDS: Vulnerable: Clear CPU buffers attempted, no microcode 2023-01-13T04:30:54 [ 1.404214] TAA: Vulnerable: Clear CPU buffers attempted, no microcode 2023-01-13T04:30:54 [ 1.405214] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode 2023-01-13T04:30:54 [ 1.406214] SRBDS: Vulnerable: No microcode 2023-01-13T04:30:54 [ 1.430344] Freeing SMP alternatives memory: 52K 2023-01-13T04:30:54 [ 1.432275] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1220 v6 @ 3.00GHz (family: 0x6, model: 0x9e, stepping: 0x9) 2023-01-13T04:30:54 [ 1.433327] cblist_init_generic: Setting adjustable number of callback queues. 2023-01-13T04:30:54 [ 1.434215] cblist_init_generic: Setting shift to 2 and lim to 1. 2023-01-13T04:30:54 [ 1.435227] cblist_init_generic: Setting shift to 2 and lim to 1. 2023-01-13T04:30:54 [ 1.436227] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. 2023-01-13T04:30:54 [ 1.437215] ... version: 4 2023-01-13T04:30:54 [ 1.438214] ... bit width: 48 2023-01-13T04:30:54 [ 1.439214] ... generic registers: 8 2023-01-13T04:30:54 [ 1.440214] ... value mask: 0000ffffffffffff 2023-01-13T04:30:54 [ 1.441214] ... max period: 00007fffffffffff 2023-01-13T04:30:54 [ 1.442214] ... fixed-purpose events: 3 2023-01-13T04:30:54 [ 1.443214] ... event mask: 00000007000000ff 2023-01-13T04:30:54 [ 1.444338] Estimated ratio of average max frequency by base frequency (times 1024): 1126 2023-01-13T04:30:54 [ 1.445230] rcu: Hierarchical SRCU implementation. 2023-01-13T04:30:54 [ 1.446214] rcu: Max phase no-delay instances is 400. 2023-01-13T04:30:54 [ 1.447456] smp: Bringing up secondary CPUs ... 2023-01-13T04:30:54 [ 1.448283] x86: Booting SMP configuration: 2023-01-13T04:30:54 [ 1.449215] .... node #0, CPUs: #1 #2 #3 2023-01-13T04:30:54 [ 1.450634] smp: Brought up 1 node, 4 CPUs 2023-01-13T04:30:54 [ 1.452214] smpboot: Max logical packages: 1 2023-01-13T04:30:54 [ 1.453214] smpboot: Total of 4 processors activated (24000.00 BogoMIPS) 2023-01-13T04:30:54 [ 1.455538] devtmpfs: initialized 2023-01-13T04:30:54 [ 1.456363] ACPI: PM: Registering ACPI NVS region [mem 0x88767000-0x88767fff] (4096 bytes) 2023-01-13T04:30:54 [ 1.457215] ACPI: PM: Registering ACPI NVS region [mem 0x8d11f000-0x8d891fff] (7811072 bytes) 2023-01-13T04:30:54 [ 1.458325] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns 2023-01-13T04:30:54 [ 1.459216] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) 2023-01-13T04:30:54 [ 1.460385] PM: RTC time: 04:30:54, date: 2023-01-13 2023-01-13T04:30:54 [ 1.461276] NET: Registered PF_NETLINK/PF_ROUTE protocol family 2023-01-13T04:30:54 [ 1.462290] audit: initializing netlink subsys (disabled) 2023-01-13T04:30:54 [ 1.463232] audit: type=2000 audit(1673584252.085:1): state=initialized audit_enabled=0 res=1 2023-01-13T04:30:54 [ 1.463277] thermal_sys: Registered thermal governor 'step_wise' 2023-01-13T04:30:54 [ 1.464215] thermal_sys: Registered thermal governor 'user_space' 2023-01-13T04:30:54 [ 1.465223] cpuidle: using governor menu 2023-01-13T04:30:54 [ 1.475303] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) 2023-01-13T04:30:54 [ 1.484216] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as E820 entry 2023-01-13T04:30:54 [ 1.491222] PCI: Using configuration type 1 for base access 2023-01-13T04:30:54 [ 1.497321] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' 2023-01-13T04:30:54 [ 1.498243] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. 2023-01-13T04:30:54 [ 1.499240] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages 2023-01-13T04:30:54 [ 1.500215] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page 2023-01-13T04:30:54 [ 1.501250] cryptd: max_cpu_qlen set to 1000 2023-01-13T04:30:54 [ 1.502281] ACPI: Added _OSI(Module Device) 2023-01-13T04:30:54 [ 1.503216] ACPI: Added _OSI(Processor Device) 2023-01-13T04:30:54 [ 1.504214] ACPI: Added _OSI(3.0 _SCP Extensions) 2023-01-13T04:30:54 [ 1.505214] ACPI: Added _OSI(Processor Aggregator Device) 2023-01-13T04:30:54 [ 1.529435] ACPI: 7 ACPI AML tables successfully acquired and loaded 2023-01-13T04:30:54 [ 1.533265] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored 2023-01-13T04:30:54 [ 1.536216] ACPI: Dynamic OEM Table Load: 2023-01-13T04:30:54 [ 1.539907] ACPI: Dynamic OEM Table Load: 2023-01-13T04:30:54 [ 1.540219] ACPI: SSDT 0xFFFF8AC34098A800 000660 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) 2023-01-13T04:30:54 [ 1.542694] ACPI: _PR_.CPU0: _OSC native thermal LVT Acked 2023-01-13T04:30:54 [ 1.544381] ACPI: Dynamic OEM Table Load: 2023-01-13T04:30:54 [ 1.545217] ACPI: SSDT 0xFFFF8AC340354800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) 2023-01-13T04:30:54 [ 1.548237] ACPI: Dynamic OEM Table Load: 2023-01-13T04:30:54 [ 1.549223] ACPI: SSDT 0xFFFF8AC34098B800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) 2023-01-13T04:30:54 [ 1.551871] ACPI: Dynamic OEM Table Load: 2023-01-13T04:30:54 [ 1.552216] ACPI: SSDT 0xFFFF8AC34084B600 000119 (v02 PmRef ApCst 00003000 INTL 20120913) 2023-01-13T04:30:54 [ 1.557169] ACPI: Interpreter enabled 2023-01-13T04:30:54 [ 1.557241] ACPI: PM: (supports S0 S4 S5) 2023-01-13T04:30:54 [ 1.558220] ACPI: Using IOAPIC for interrupt routing 2023-01-13T04:30:54 [ 1.559243] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug 2023-01-13T04:30:54 [ 1.560214] PCI: Using E820 reservations for host bridge windows 2023-01-13T04:30:54 [ 1.561977] ACPI: Enabled 8 GPEs in block 00 to 7F 2023-01-13T04:30:54 [ 1.564212] ACPI: _SB_.PCI0.PEG0.PG00: New power resource 2023-01-13T04:30:54 [ 1.564689] ACPI: _SB_.PCI0.PEG1.PG01: New power resource 2023-01-13T04:30:54 [ 1.565490] ACPI: _SB_.PCI0.PEG2.PG02: New power resource 2023-01-13T04:30:54 [ 1.568791] ACPI: _SB_.PCI0.RP09.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.569550] ACPI: _SB_.PCI0.RP10.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.570467] ACPI: _SB_.PCI0.RP11.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.571468] ACPI: _SB_.PCI0.RP12.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.572466] ACPI: _SB_.PCI0.RP13.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.573465] ACPI: _SB_.PCI0.RP01.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.574509] ACPI: _SB_.PCI0.RP02.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.575488] ACPI: _SB_.PCI0.RP03.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.576489] ACPI: _SB_.PCI0.RP04.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.577488] ACPI: _SB_.PCI0.RP05.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.578465] ACPI: _SB_.PCI0.RP06.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.579464] ACPI: _SB_.PCI0.RP07.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.580510] ACPI: _SB_.PCI0.RP08.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.581657] ACPI: _SB_.PCI0.RP17.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.582549] ACPI: _SB_.PCI0.RP18.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.583478] ACPI: _SB_.PCI0.RP19.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.584480] ACPI: _SB_.PCI0.RP20.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.585478] ACPI: _SB_.PCI0.RP14.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.586469] ACPI: _SB_.PCI0.RP15.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.587465] ACPI: _SB_.PCI0.RP16.PXSX.WRST: New power resource 2023-01-13T04:30:54 [ 1.596917] ACPI: _TZ_.FN00: New power resource 2023-01-13T04:30:54 [ 1.597287] ACPI: _TZ_.FN01: New power resource 2023-01-13T04:30:54 [ 1.598285] ACPI: _TZ_.FN02: New power resource 2023-01-13T04:30:54 [ 1.599285] ACPI: _TZ_.FN03: New power resource 2023-01-13T04:30:54 [ 1.600283] ACPI: _TZ_.FN04: New power resource 2023-01-13T04:30:54 [ 1.602474] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) 2023-01-13T04:30:54 [ 1.603218] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] 2023-01-13T04:30:54 [ 1.605253] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] 2023-01-13T04:30:54 [ 1.607085] PCI host bridge to bus 0000:00 2023-01-13T04:30:54 [ 1.607215] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] 2023-01-13T04:30:54 [ 1.608214] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] 2023-01-13T04:30:54 [ 1.609214] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] 2023-01-13T04:30:54 [ 1.610214] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] 2023-01-13T04:30:54 [ 1.611214] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] 2023-01-13T04:30:54 [ 1.612214] pci_bus 0000:00: root bus resource [bus 00-fe] 2023-01-13T04:30:54 [ 1.613299] pci 0000:00:00.0: [8086:5918] type 00 class 0x060000 2023-01-13T04:30:54 [ 1.614372] pci 0000:00:13.0: [8086:a135] type 00 class 0x000000 2023-01-13T04:30:54 [ 1.615232] pci 0000:00:13.0: reg 0x10: [mem 0xdf322000-0xdf322fff 64bit] 2023-01-13T04:30:54 [ 1.616477] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 2023-01-13T04:30:54 [ 1.617229] pci 0000:00:14.0: reg 0x10: [mem 0xdf300000-0xdf30ffff 64bit] 2023-01-13T04:30:54 [ 1.618277] pci 0000:00:14.0: PME# supported from D3hot D3cold 2023-01-13T04:30:54 [ 1.619746] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 2023-01-13T04:30:54 [ 1.620229] pci 0000:00:14.2: reg 0x10: [mem 0xdf321000-0xdf321fff 64bit] 2023-01-13T04:30:54 [ 1.621410] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 2023-01-13T04:30:54 [ 1.622248] pci 0000:00:16.0: reg 0x10: [mem 0xdf320000-0xdf320fff 64bit] 2023-01-13T04:30:54 [ 1.623344] pci 0000:00:16.0: PME# supported from D3hot 2023-01-13T04:30:54 [ 1.624337] pci 0000:00:16.1: [8086:a13b] type 00 class 0x078000 2023-01-13T04:30:54 [ 1.625248] pci 0000:00:16.1: reg 0x10: [mem 0xdf31f000-0xdf31ffff 64bit] 2023-01-13T04:30:54 [ 1.626344] pci 0000:00:16.1: PME# supported from D3hot 2023-01-13T04:30:54 [ 1.627340] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 2023-01-13T04:30:54 [ 1.628224] pci 0000:00:17.0: reg 0x10: [mem 0xdf310000-0xdf311fff] 2023-01-13T04:30:54 [ 1.629219] pci 0000:00:17.0: reg 0x14: [mem 0xdf31e000-0xdf31e0ff] 2023-01-13T04:30:54 [ 1.630219] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057] 2023-01-13T04:30:55 [ 1.631219] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043] 2023-01-13T04:30:55 [ 1.632219] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f] 2023-01-13T04:30:55 [ 1.633219] pci 0000:00:17.0: reg 0x24: [mem 0xdf31d000-0xdf31d7ff] 2023-01-13T04:30:55 [ 1.634252] pci 0000:00:17.0: PME# supported from D3hot 2023-01-13T04:30:55 [ 1.635456] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 2023-01-13T04:30:55 [ 1.636293] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold 2023-01-13T04:30:55 [ 1.637628] pci 0000:00:1c.1: [8086:a111] type 01 class 0x060400 2023-01-13T04:30:55 [ 1.638292] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold 2023-01-13T04:30:55 [ 1.639629] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400 2023-01-13T04:30:55 [ 1.640280] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold 2023-01-13T04:30:55 [ 1.641619] pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100 2023-01-13T04:30:55 [ 1.642555] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 2023-01-13T04:30:55 [ 1.643227] pci 0000:00:1f.2: reg 0x10: [mem 0xdf318000-0xdf31bfff] 2023-01-13T04:30:55 [ 1.644483] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 2023-01-13T04:30:55 [ 1.645269] pci 0000:00:1f.4: reg 0x10: [mem 0xdf31c000-0xdf31c0ff 64bit] 2023-01-13T04:30:55 [ 1.646282] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f] 2023-01-13T04:30:55 [ 1.647537] pci 0000:01:00.0: working around ROM BAR overlap defect 2023-01-13T04:30:55 [ 1.648215] pci 0000:01:00.0: [8086:1533] type 00 class 0x020000 2023-01-13T04:30:55 [ 1.649245] pci 0000:01:00.0: reg 0x10: [mem 0xdf200000-0xdf27ffff] 2023-01-13T04:30:55 [ 1.650246] pci 0000:01:00.0: reg 0x18: [io 0xe000-0xe01f] 2023-01-13T04:30:55 [ 1.651234] pci 0000:01:00.0: reg 0x1c: [mem 0xdf280000-0xdf283fff] 2023-01-13T04:30:55 [ 1.652371] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold 2023-01-13T04:30:55 [ 1.653497] pci 0000:00:1c.0: PCI bridge to [bus 01] 2023-01-13T04:30:55 [ 1.654216] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] 2023-01-13T04:30:55 [ 1.655215] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff] 2023-01-13T04:30:55 [ 1.656297] pci 0000:02:00.0: working around ROM BAR overlap defect 2023-01-13T04:30:55 [ 1.657214] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000 2023-01-13T04:30:55 [ 1.658244] pci 0000:02:00.0: reg 0x10: [mem 0xdf100000-0xdf17ffff] 2023-01-13T04:30:55 [ 1.659246] pci 0000:02:00.0: reg 0x18: [io 0xd000-0xd01f] 2023-01-13T04:30:55 [ 1.660234] pci 0000:02:00.0: reg 0x1c: [mem 0xdf180000-0xdf183fff] 2023-01-13T04:30:55 [ 1.661370] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold 2023-01-13T04:30:55 [ 1.662495] pci 0000:00:1c.1: PCI bridge to [bus 02] 2023-01-13T04:30:55 [ 1.663216] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] 2023-01-13T04:30:55 [ 1.664215] pci 0000:00:1c.1: bridge window [mem 0xdf100000-0xdf1fffff] 2023-01-13T04:30:55 [ 1.665277] pci 0000:03:00.0: [1a03:1150] type 01 class 0x060400 2023-01-13T04:30:55 [ 1.666275] pci 0000:03:00.0: enabling Extended Tags 2023-01-13T04:30:55 [ 1.667292] pci 0000:03:00.0: supports D1 D2 2023-01-13T04:30:55 [ 1.668214] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold 2023-01-13T04:30:55 [ 1.669488] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' 2023-01-13T04:30:55 [ 1.670222] pci 0000:00:1c.6: PCI bridge to [bus 03-04] 2023-01-13T04:30:55 [ 1.671215] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff] 2023-01-13T04:30:55 [ 1.672215] pci 0000:00:1c.6: bridge window [mem 0xde000000-0xdf0fffff] 2023-01-13T04:30:55 [ 1.673258] pci_bus 0000:04: extended config space not accessible 2023-01-13T04:30:55 [ 1.674245] pci 0000:04:00.0: [1a03:2000] type 00 class 0x030000 2023-01-13T04:30:55 [ 1.675234] pci 0000:04:00.0: reg 0x10: [mem 0xde000000-0xdeffffff] 2023-01-13T04:30:55 [ 1.676225] pci 0000:04:00.0: reg 0x14: [mem 0xdf000000-0xdf01ffff] 2023-01-13T04:30:55 [ 1.677225] pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc07f] 2023-01-13T04:30:55 [ 1.678278] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] 2023-01-13T04:30:55 [ 1.679254] pci 0000:04:00.0: supports D1 D2 2023-01-13T04:30:55 [ 1.680216] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold 2023-01-13T04:30:55 [ 1.681320] pci 0000:03:00.0: PCI bridge to [bus 04] 2023-01-13T04:30:55 [ 1.682220] pci 0000:03:00.0: bridge window [io 0xc000-0xcfff] 2023-01-13T04:30:55 [ 1.683217] pci 0000:03:00.0: bridge window [mem 0xde000000-0xdf0fffff] 2023-01-13T04:30:55 [ 1.686060] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 2023-01-13T04:30:55 [ 1.686277] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 2023-01-13T04:30:55 [ 1.687274] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 2023-01-13T04:30:55 [ 1.688274] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 2023-01-13T04:30:55 [ 1.689275] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 2023-01-13T04:30:55 [ 1.690275] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 2023-01-13T04:30:55 [ 1.691270] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 2023-01-13T04:30:55 [ 1.692273] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 2023-01-13T04:30:55 [ 1.698764] iommu: Default domain type: Translated 2023-01-13T04:30:55 [ 1.699215] iommu: DMA domain TLB invalidation policy: lazy mode 2023-01-13T04:30:55 [ 1.700257] SCSI subsystem initialized 2023-01-13T04:30:55 [ 1.701244] ACPI: bus type USB registered 2023-01-13T04:30:55 [ 1.702224] usbcore: registered new interface driver usbfs 2023-01-13T04:30:55 [ 1.703218] usbcore: registered new interface driver hub 2023-01-13T04:30:55 [ 1.704219] usbcore: registered new device driver usb 2023-01-13T04:30:55 [ 1.705224] mc: Linux media interface: v0.10 2023-01-13T04:30:55 [ 1.706219] videodev: Linux video capture interface: v2.00 2023-01-13T04:30:55 [ 1.707217] pps_core: LinuxPPS API ver. 1 registered 2023-01-13T04:30:55 [ 1.708214] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it 2023-01-13T04:30:55 [ 1.709215] PTP clock support registered 2023-01-13T04:30:55 [ 1.710237] Advanced Linux Sound Architecture Driver Initialized. 2023-01-13T04:30:55 [ 1.711378] NetLabel: Initializing 2023-01-13T04:30:55 [ 1.712214] NetLabel: domain hash size = 128 2023-01-13T04:30:55 [ 1.713214] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO 2023-01-13T04:30:55 [ 1.714227] NetLabel: unlabeled traffic allowed by default 2023-01-13T04:30:55 [ 1.715228] PCI: Using ACPI for IRQ routing 2023-01-13T04:30:55 [ 1.744100] pci 0000:04:00.0: vgaarb: setting as boot VGA device 2023-01-13T04:30:55 [ 1.744213] pci 0000:04:00.0: vgaarb: bridge control possible 2023-01-13T04:30:55 [ 1.744213] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none 2023-01-13T04:30:55 [ 1.744215] vgaarb: loaded 2023-01-13T04:30:55 [ 1.745255] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 2023-01-13T04:30:55 [ 1.746214] hpet0: 8 comparators, 64-bit 24.000000 MHz counter 2023-01-13T04:30:55 [ 1.749241] clocksource: Switched to clocksource tsc-early 2023-01-13T04:30:55 [ 1.754785] VFS: Disk quotas dquot_6.6.0 2023-01-13T04:30:55 [ 1.758722] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 2023-01-13T04:30:55 [ 1.765646] pnp: PnP ACPI init 2023-01-13T04:30:55 [ 1.769016] system 00:00: [io 0x0a00-0x0a0f] has been reserved 2023-01-13T04:30:55 [ 1.774949] system 00:00: [io 0x0a10-0x0a1f] has been reserved 2023-01-13T04:30:55 [ 1.780866] system 00:00: [io 0x0a20-0x0a2f] has been reserved 2023-01-13T04:30:55 [ 1.786785] system 00:00: [io 0x0a30-0x0a3f] has been reserved 2023-01-13T04:30:55 [ 1.792703] system 00:00: [io 0x0a40-0x0a4f] has been reserved 2023-01-13T04:30:55 [ 1.799361] system 00:03: [io 0x0680-0x069f] has been reserved 2023-01-13T04:30:55 [ 1.805291] system 00:03: [io 0xffff] has been reserved 2023-01-13T04:30:55 [ 1.810609] system 00:03: [io 0xffff] has been reserved 2023-01-13T04:30:55 [ 1.815920] system 00:03: [io 0xffff] has been reserved 2023-01-13T04:30:55 [ 1.821225] system 00:03: [io 0x1800-0x18fe] has been reserved 2023-01-13T04:30:55 [ 1.827144] system 00:03: [io 0x164e-0x164f] has been reserved 2023-01-13T04:30:55 [ 1.833136] system 00:04: [io 0x0800-0x087f] has been reserved 2023-01-13T04:30:55 [ 1.839116] system 00:06: [io 0x1854-0x1857] has been reserved 2023-01-13T04:30:55 [ 1.845290] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved 2023-01-13T04:30:55 [ 1.851921] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved 2023-01-13T04:30:55 [ 1.858541] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved 2023-01-13T04:30:55 [ 1.865147] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved 2023-01-13T04:30:55 [ 1.871759] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved 2023-01-13T04:30:55 [ 1.878371] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved 2023-01-13T04:30:55 [ 1.884984] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved 2023-01-13T04:30:55 [ 1.891595] system 00:07: [mem 0xff000000-0xffffffff] has been reserved 2023-01-13T04:30:55 [ 1.898199] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved 2023-01-13T04:30:55 [ 1.905150] system 00:07: [mem 0xdffe0000-0xdfffffff] has been reserved 2023-01-13T04:30:55 [ 1.911803] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved 2023-01-13T04:30:55 [ 1.918418] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved 2023-01-13T04:30:55 [ 1.925031] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved 2023-01-13T04:30:55 [ 1.931645] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved 2023-01-13T04:30:55 [ 1.938605] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved 2023-01-13T04:30:55 [ 1.945215] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved 2023-01-13T04:30:55 [ 1.951827] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved 2023-01-13T04:30:55 [ 1.958649] system 00:09: [io 0xff00-0xfffe] has been reserved 2023-01-13T04:30:55 [ 1.965425] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved 2023-01-13T04:30:55 [ 1.972048] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved 2023-01-13T04:30:55 [ 1.978658] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved 2023-01-13T04:30:55 [ 1.985976] pnp: PnP ACPI: found 11 devices 2023-01-13T04:30:55 [ 1.995942] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns 2023-01-13T04:30:55 [ 2.004825] NET: Registered PF_INET protocol family 2023-01-13T04:30:55 [ 2.009834] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) 2023-01-13T04:30:55 [ 2.020017] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) 2023-01-13T04:30:55 [ 2.028640] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) 2023-01-13T04:30:55 [ 2.036391] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) 2023-01-13T04:30:55 [ 2.044577] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) 2023-01-13T04:30:55 [ 2.052212] TCP: Hash tables configured (established 131072 bind 65536) 2023-01-13T04:30:55 [ 2.058896] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) 2023-01-13T04:30:55 [ 2.066503] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) 2023-01-13T04:30:55 [ 2.073320] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) 2023-01-13T04:30:55 [ 2.080595] NET: Registered PF_UNIX/PF_LOCAL protocol family 2023-01-13T04:30:55 [ 2.086324] RPC: Registered named UNIX socket transport module. 2023-01-13T04:30:55 [ 2.092251] RPC: Registered udp transport module. 2023-01-13T04:30:55 [ 2.096956] RPC: Registered tcp transport module. 2023-01-13T04:30:55 [ 2.101659] RPC: Registered tcp NFSv4.1 backchannel transport module. 2023-01-13T04:30:55 [ 2.108313] pci 0000:00:1c.0: PCI bridge to [bus 01] 2023-01-13T04:30:55 [ 2.113290] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] 2023-01-13T04:30:55 [ 2.119387] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff] 2023-01-13T04:30:55 [ 2.126175] pci 0000:00:1c.1: PCI bridge to [bus 02] 2023-01-13T04:30:55 [ 2.131136] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] 2023-01-13T04:30:55 [ 2.137231] pci 0000:00:1c.1: bridge window [mem 0xdf100000-0xdf1fffff] 2023-01-13T04:30:55 [ 2.144020] pci 0000:03:00.0: PCI bridge to [bus 04] 2023-01-13T04:30:55 [ 2.148981] pci 0000:03:00.0: bridge window [io 0xc000-0xcfff] 2023-01-13T04:30:55 [ 2.155076] pci 0000:03:00.0: bridge window [mem 0xde000000-0xdf0fffff] 2023-01-13T04:30:55 [ 2.161865] pci 0000:00:1c.6: PCI bridge to [bus 03-04] 2023-01-13T04:30:55 [ 2.167083] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff] 2023-01-13T04:30:55 [ 2.173176] pci 0000:00:1c.6: bridge window [mem 0xde000000-0xdf0fffff] 2023-01-13T04:30:55 [ 2.179967] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] 2023-01-13T04:30:55 [ 2.186142] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] 2023-01-13T04:30:55 [ 2.192320] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] 2023-01-13T04:30:56 [ 2.199194] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window] 2023-01-13T04:30:56 [ 2.206064] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] 2023-01-13T04:30:56 [ 2.212929] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] 2023-01-13T04:30:56 [ 2.218500] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf2fffff] 2023-01-13T04:30:56 [ 2.224760] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] 2023-01-13T04:30:56 [ 2.230330] pci_bus 0000:02: resource 1 [mem 0xdf100000-0xdf1fffff] 2023-01-13T04:30:56 [ 2.236589] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] 2023-01-13T04:30:56 [ 2.242160] pci_bus 0000:03: resource 1 [mem 0xde000000-0xdf0fffff] 2023-01-13T04:30:56 [ 2.248418] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] 2023-01-13T04:30:56 [ 2.253989] pci_bus 0000:04: resource 1 [mem 0xde000000-0xdf0fffff] 2023-01-13T04:30:56 [ 2.265143] PCI: CLS 0 bytes, default 64 2023-01-13T04:30:56 [ 2.269081] DMAR: Host address width 39 2023-01-13T04:30:56 [ 2.272927] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 2023-01-13T04:30:56 [ 2.278244] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da 2023-01-13T04:30:56 [ 2.286160] DMAR: RMRR base: 0x0000008ccae000 end: 0x0000008cccdfff 2023-01-13T04:30:56 [ 2.292432] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) 2023-01-13T04:30:56 [ 2.298873] software IO TLB: mapped [mem 0x0000000088ba1000-0x000000008cba1000] (64MB) 2023-01-13T04:30:56 [ 2.306823] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer 2023-01-13T04:30:56 [ 2.314744] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules 2023-01-13T04:30:56 [ 2.320487] RAPL PMU: hw unit of domain package 2^-14 Joules 2023-01-13T04:30:56 [ 2.326137] RAPL PMU: hw unit of domain dram 2^-14 Joules 2023-01-13T04:30:56 [ 2.335047] kvm: already loaded vendor module 'kvm_intel' 2023-01-13T04:30:56 [ 2.341150] Initialise system trusted keyrings 2023-01-13T04:30:56 [ 2.345632] workingset: timestamp_bits=40 max_order=22 bucket_order=0 2023-01-13T04:30:56 [ 2.352182] NFS: Registering the id_resolver key type 2023-01-13T04:30:56 [ 2.357246] Key type id_resolver registered 2023-01-13T04:30:56 [ 2.361438] Key type id_legacy registered 2023-01-13T04:30:56 [ 2.365475] 9p: Installing v9fs 9p2000 file system support 2023-01-13T04:30:56 [ 2.378638] NET: Registered PF_ALG protocol family 2023-01-13T04:30:56 [ 2.383441] Key type asymmetric registered 2023-01-13T04:30:56 [ 2.387538] Asymmetric key parser 'x509' registered 2023-01-13T04:30:56 [ 2.392418] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) 2023-01-13T04:30:56 [ 2.399828] io scheduler mq-deadline registered 2023-01-13T04:30:56 [ 2.404370] io scheduler kyber registered 2023-01-13T04:30:56 [ 2.408615] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24 2023-01-13T04:30:56 [ 2.414594] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25 2023-01-13T04:30:56 [ 2.420558] pcieport 0000:00:1c.6: PME: Signaling with IRQ 26 2023-01-13T04:30:56 [ 2.426511] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 2023-01-13T04:30:56 [ 2.434891] ACPI: button: Sleep Button [SLPB] 2023-01-13T04:30:56 [ 2.439288] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 2023-01-13T04:30:56 [ 2.447657] ACPI: button: Power Button [PWRB] 2023-01-13T04:30:56 [ 2.452052] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 2023-01-13T04:30:56 [ 2.459481] ACPI: button: Power Button [PWRF] 2023-01-13T04:30:56 [ 2.464189] ACPI: _PR_.CPU0: Found 3 idle states 2023-01-13T04:30:56 [ 2.469065] ACPI: _PR_.CPU1: Found 3 idle states 2023-01-13T04:30:56 [ 2.473940] ACPI: _PR_.CPU2: Found 3 idle states 2023-01-13T04:30:56 [ 2.478825] ACPI: _PR_.CPU3: Found 3 idle states 2023-01-13T04:30:56 [ 2.483994] thermal LNXTHERM:00: registered as thermal_zone0 2023-01-13T04:30:56 [ 2.489667] ACPI: thermal: Thermal Zone [TZ00] (28 C) 2023-01-13T04:30:56 [ 2.494838] thermal LNXTHERM:01: registered as thermal_zone1 2023-01-13T04:30:56 [ 2.500508] ACPI: thermal: Thermal Zone [TZ01] (30 C) 2023-01-13T04:30:56 [ 2.505653] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 2023-01-13T04:30:56 [ 2.511997] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A 2023-01-13T04:30:56 [ 2.519412] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A 2023-01-13T04:30:56 [ 2.527204] Non-volatile memory driver v1.3 2023-01-13T04:30:56 [ 2.531406] Linux agpgart interface v0.103 2023-01-13T04:30:56 [ 2.535629] ACPI: bus type drm_connector registered 2023-01-13T04:30:56 [ 2.541968] loop: module loaded 2023-01-13T04:30:56 [ 2.555758] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode 2023-01-13T04:30:56 [ 2.563941] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 2023-01-13T04:30:56 [ 2.595156] scsi host0: ahci 2023-01-13T04:30:56 [ 2.598363] scsi host1: ahci 2023-01-13T04:30:56 [ 2.601529] scsi host2: ahci 2023-01-13T04:30:56 [ 2.604741] scsi host3: ahci 2023-01-13T04:30:56 [ 2.607933] scsi host4: ahci 2023-01-13T04:30:56 [ 2.611111] scsi host5: ahci 2023-01-13T04:30:56 [ 2.614226] scsi host6: ahci 2023-01-13T04:30:56 [ 2.617379] scsi host7: ahci 2023-01-13T04:30:56 [ 2.620327] ata1: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d100 irq 27 2023-01-13T04:30:56 [ 2.627722] ata2: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d180 irq 27 2023-01-13T04:30:56 [ 2.635114] ata3: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d200 irq 27 2023-01-13T04:30:56 [ 2.642504] ata4: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d280 irq 27 2023-01-13T04:30:56 [ 2.649888] ata5: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d300 irq 27 2023-01-13T04:30:56 [ 2.657271] ata6: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d380 irq 27 2023-01-13T04:30:56 [ 2.664656] ata7: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d400 irq 27 2023-01-13T04:30:56 [ 2.672041] ata8: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d480 irq 27 2023-01-13T04:30:56 [ 2.679742] e100: Intel(R) PRO/100 Network Driver 2023-01-13T04:30:56 [ 2.684460] e100: Copyright(c) 1999-2006 Intel Corporation 2023-01-13T04:30:56 [ 2.689959] e1000: Intel(R) PRO/1000 Network Driver 2023-01-13T04:30:56 [ 2.694843] e1000: Copyright (c) 1999-2006 Intel Corporation. 2023-01-13T04:30:56 [ 2.700595] e1000e: Intel(R) PRO/1000 Network Driver 2023-01-13T04:30:56 [ 2.705571] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. 2023-01-13T04:30:56 [ 2.711498] igb: Intel(R) Gigabit Ethernet Network Driver 2023-01-13T04:30:56 [ 2.716907] igb: Copyright (c) 2007-2014 Intel Corporation. 2023-01-13T04:30:56 [ 2.750538] pps pps0: new PPS source ptp0 2023-01-13T04:30:56 [ 2.754645] igb 0000:01:00.0: added PHC on eth0 2023-01-13T04:30:56 [ 2.759193] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection 2023-01-13T04:30:56 [ 2.766062] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) ac:1f:6b:1a:b3:4e 2023-01-13T04:30:56 [ 2.773242] igb 0000:01:00.0: eth0: PBA No: 012700-000 2023-01-13T04:30:56 [ 2.778378] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) 2023-01-13T04:30:56 [ 2.816488] pps pps1: new PPS source ptp1 2023-01-13T04:30:56 [ 2.820594] igb 0000:02:00.0: added PHC on eth1 2023-01-13T04:30:56 [ 2.825137] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection 2023-01-13T04:30:56 [ 2.832013] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) ac:1f:6b:1a:b3:4f 2023-01-13T04:30:56 [ 2.839205] igb 0000:02:00.0: eth1: PBA No: 012700-000 2023-01-13T04:30:56 [ 2.844335] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) 2023-01-13T04:30:56 [ 2.851939] sky2: driver version 1.30 2023-01-13T04:30:56 [ 2.855629] QLogic FastLinQ 4xxxx Core Module qed 2023-01-13T04:30:56 [ 2.860345] qede init: QLogic FastLinQ 4xxxx Ethernet Driver qede 2023-01-13T04:30:56 [ 2.866462] usbcore: registered new interface driver asix 2023-01-13T04:30:56 [ 2.871873] usbcore: registered new interface driver ax88179_178a 2023-01-13T04:30:56 [ 2.877969] usbcore: registered new interface driver cdc_ether 2023-01-13T04:30:56 [ 2.883810] usbcore: registered new interface driver net1080 2023-01-13T04:30:56 [ 2.889475] usbcore: registered new interface driver cdc_subset 2023-01-13T04:30:56 [ 2.895395] usbcore: registered new interface driver zaurus 2023-01-13T04:30:56 [ 2.900967] usbcore: registered new interface driver cdc_ncm 2023-01-13T04:30:56 [ 2.906630] usbcore: registered new interface driver r8153_ecm 2023-01-13T04:30:56 [ 2.912606] usbcore: registered new interface driver usblp 2023-01-13T04:30:56 [ 2.912777] xhci_hcd 0000:00:14.0: xHCI Host Controller 2023-01-13T04:30:56 [ 2.918103] usbcore: registered new interface driver usb-storage 2023-01-13T04:30:56 [ 2.923418] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 2023-01-13T04:30:56 [ 2.929361] i8042: PNP: No PS/2 controller found. 2023-01-13T04:30:56 [ 2.937858] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810 2023-01-13T04:30:56 [ 2.941747] rtc_cmos 00:05: RTC can wake from S4 2023-01-13T04:30:56 [ 2.950994] xhci_hcd 0000:00:14.0: xHCI Host Controller 2023-01-13T04:30:56 [ 2.955966] rtc_cmos 00:05: registered as rtc0 2023-01-13T04:30:56 [ 2.960512] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 2023-01-13T04:30:56 [ 2.964893] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram 2023-01-13T04:30:56 [ 2.972254] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed 2023-01-13T04:30:56 [ 2.978966] fail to initialize ptp_kvm 2023-01-13T04:30:56 [ 2.979147] i801_smbus 0000:00:1f.4: SPD Write Disable is set 2023-01-13T04:30:56 [ 2.979201] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt 2023-01-13T04:30:56 [ 2.979255] pci 0000:00:1f.1: [8086:a120] type 00 class 0x058000 2023-01-13T04:30:56 [ 2.979321] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit] 2023-01-13T04:30:56 [ 2.980530] i2c i2c-0: 2/4 memory slots populated (from DMI) 2023-01-13T04:30:56 [ 2.982802] ata2: SATA link down (SStatus 0 SControl 300) 2023-01-13T04:30:56 [ 2.982902] ata4: SATA link down (SStatus 0 SControl 300) 2023-01-13T04:30:56 [ 2.983969] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) 2023-01-13T04:30:56 [ 2.985210] ata5: SATA link down (SStatus 0 SControl 300) 2023-01-13T04:30:56 [ 2.985270] ata6: SATA link down (SStatus 0 SControl 300) 2023-01-13T04:30:56 [ 2.985332] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02 2023-01-13T04:30:56 [ 2.985334] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2023-01-13T04:30:56 [ 2.985335] usb usb1: Product: xHCI Host Controller 2023-01-13T04:30:56 [ 2.985337] usb usb1: Manufacturer: Linux 6.2.0-rc3-next-20230113 xhci-hcd 2023-01-13T04:30:56 [ 2.985338] usb usb1: SerialNumber: 0000:00:14.0 2023-01-13T04:30:56 [ 2.985571] hub 1-0:1.0: USB hub found 2023-01-13T04:30:56 [ 2.985604] hub 1-0:1.0: 16 ports detected 2023-01-13T04:30:56 [ 2.987391] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02 2023-01-13T04:30:56 [ 2.987394] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2023-01-13T04:30:56 [ 2.987395] usb usb2: Product: xHCI Host Controller 2023-01-13T04:30:56 [ 2.987396] usb usb2: Manufacturer: Linux 6.2.0-rc3-next-20230113 xhci-hcd 2023-01-13T04:30:56 [ 2.987397] usb usb2: SerialNumber: 0000:00:14.0 2023-01-13T04:30:56 [ 2.987478] hub 2-0:1.0: USB hub found 2023-01-13T04:30:56 [ 2.987500] hub 2-0:1.0: 10 ports detected 2023-01-13T04:30:56 [ 2.988211] usb: port power management may be unreliable 2023-01-13T04:30:56 [ 2.995251] i2c i2c-0: Successfully instantiated SPD at 0x51 2023-01-13T04:30:56 [ 3.000633] ata7: SATA link down (SStatus 0 SControl 300) 2023-01-13T04:30:56 [ 3.007167] i2c i2c-0: Successfully instantiated SPD at 0x53 2023-01-13T04:30:56 [ 3.011328] kwatchdog (84) used greatest stack depth: 15624 bytes left 2023-01-13T04:30:56 [ 3.013441] ata1: SATA link down (SStatus 0 SControl 300) 2023-01-13T04:30:56 [ 3.013534] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com 2023-01-13T04:30:56 [ 3.013540] intel_pstate: Intel P-state driver initializing 2023-01-13T04:30:56 [ 3.041506] intel_pstate: Disabling energy efficiency optimization 2023-01-13T04:30:56 [ 3.046887] ata8: SATA link down (SStatus 0 SControl 300) 2023-01-13T04:30:56 [ 3.055073] intel_pstate: HWP enabled 2023-01-13T04:30:56 [ 3.055566] kworker/u8:1 (89) used greatest stack depth: 14392 bytes left 2023-01-13T04:30:56 [ 3.062297] ata3.00: ATA-8: TOSHIBA MG03ACA100, FL1A, max UDMA/100 2023-01-13T04:30:57 [ 3.067617] hid: raw HID events driver (C) Jiri Kosina 2023-01-13T04:30:57 [ 3.074594] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA 2023-01-13T04:30:57 [ 3.078752] usbcore: registered new interface driver usbhid 2023-01-13T04:30:57 [ 3.083395] ata3.00: configured for UDMA/100 2023-01-13T04:30:57 [ 3.086502] usbhid: USB HID core driver 2023-01-13T04:30:57 [ 3.087089] Initializing XFRM netlink socket 2023-01-13T04:30:57 [ 3.094840] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1A PQ: 0 ANSI: 5 2023-01-13T04:30:57 [ 3.101993] NET: Registered PF_INET6 protocol family 2023-01-13T04:30:57 [ 3.106975] scsi 2:0:0:0: Attached scsi generic sg0 type 0 2023-01-13T04:30:57 [ 3.107064] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) 2023-01-13T04:30:57 [ 3.107129] sd 2:0:0:0: [sda] Write Protect is off 2023-01-13T04:30:57 [ 3.107149] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 2023-01-13T04:30:57 [ 3.107171] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes 2023-01-13T04:30:57 [ 3.113947] Segment Routing with IPv6 2023-01-13T04:30:57 [ 3.231252] usb 1-6: new high-speed USB device number 2 using xhci_hcd 2023-01-13T04:30:57 [ 3.232351] In-situ OAM (IOAM) with IPv6 2023-01-13T04:30:57 [ 3.292643] sd 2:0:0:0: [sda] Attached SCSI disk 2023-01-13T04:30:57 [ 3.292655] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 2023-01-13T04:30:57 [ 3.303296] NET: Registered PF_PACKET protocol family 2023-01-13T04:30:57 [ 3.308375] 9pnet: Installing 9P2000 support 2023-01-13T04:30:57 [ 3.312702] Key type dns_resolver registered 2023-01-13T04:30:57 [ 3.317639] microcode: Microcode Update Driver: v2.2. 2023-01-13T04:30:57 [ 3.317644] IPI shorthand broadcast: enabled 2023-01-13T04:30:57 [ 3.327042] AVX2 version of gcm_enc/dec engaged. 2023-01-13T04:30:57 [ 3.332261] AES CTR mode by8 optimization enabled 2023-01-13T04:30:57 [ 3.339544] sched_clock: Marking stable (2035178977, 1304035566)->(4501291417, -1162076874) 2023-01-13T04:30:57 [ 3.348097] registered taskstats version 1 2023-01-13T04:30:57 [ 3.352222] Loading compiled-in X.509 certificates 2023-01-13T04:30:57 [ 3.358696] PM: Magic number: 7:843:514 2023-01-13T04:30:57 [ 3.362776] platform ACPI000C:00: hash matches 2023-01-13T04:30:57 [ 3.367254] acpi ACPI000C:00: hash matches 2023-01-13T04:30:57 [ 3.367898] usb 1-6: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 2023-01-13T04:30:57 [ 3.371390] printk: console [netcon0] enabled 2023-01-13T04:30:57 [ 3.379541] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2023-01-13T04:30:57 [ 3.383898] netconsole: network logging started 2023-01-13T04:30:57 [ 3.391022] usb 1-6: Product: Cruzer Blade 2023-01-13T04:30:57 [ 3.393286] tsc: Refined TSC clocksource calibration: 2999.967 MHz 2023-01-13T04:30:57 [ 3.393290] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e261bc34, max_idle_ns: 440795261167 ns 2023-01-13T04:30:57 [ 3.415809] usb 1-6: Manufacturer: SanDisk 2023-01-13T04:30:57 [ 3.419907] usb 1-6: SerialNumber: 20042103220284D0CB42 2023-01-13T04:30:57 [ 3.425137] clocksource: Switched to clocksource tsc 2023-01-13T04:30:57 [ 3.426141] usb-storage 1-6:1.0: USB Mass Storage device detected 2023-01-13T04:30:57 [ 3.436521] scsi host8: usb-storage 1-6:1.0 2023-01-13T04:30:57 [ 3.554432] usb 1-14: new high-speed USB device number 3 using xhci_hcd 2023-01-13T04:30:57 [ 3.687893] usb 1-14: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 2023-01-13T04:30:57 [ 3.696194] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0 2023-01-13T04:30:57 [ 3.705172] hub 1-14:1.0: USB hub found 2023-01-13T04:30:57 [ 3.709202] hub 1-14:1.0: 4 ports detected 2023-01-13T04:30:57 [ 4.005425] usb 1-14.1: new low-speed USB device number 4 using xhci_hcd 2023-01-13T04:30:57 [ 4.117348] usb 1-14.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 2023-01-13T04:30:57 [ 4.125801] usb 1-14.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 2023-01-13T04:30:57 [ 4.140645] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.1/1-14.1:1.0/0003:0557:2419.0001/input/input3 2023-01-13T04:30:58 [ 4.205048] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-14.1/input0 2023-01-13T04:30:58 [ 4.218431] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.1/1-14.1:1.1/0003:0557:2419.0002/input/input4 2023-01-13T04:30:58 [ 4.230503] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-14.1/input1 2023-01-13T04:30:58 [ 4.482040] scsi 8:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 2023-01-13T04:30:58 [ 4.492945] sd 8:0:0:0: Attached scsi generic sg1 type 0 2023-01-13T04:30:58 [ 4.498775] sd 8:0:0:0: [sdb] 30595072 512-byte logical blocks: (15.7 GB/14.6 GiB) 2023-01-13T04:30:58 [ 4.508178] sd 8:0:0:0: [sdb] Write Protect is off 2023-01-13T04:30:58 [ 4.513770] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA 2023-01-13T04:30:58 [ 4.527531] sdb: sdb3 sdb4 2023-01-13T04:30:58 [ 4.530518] sd 8:0:0:0: [sdb] Attached SCSI removable disk 2023-01-13T04:31:00 [ 6.279091] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX 2023-01-13T04:31:00 [ 6.288551] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 2023-01-13T04:31:09 [ 6.306446] Sending DHCP requests ..., OK 2023-01-13T04:31:09 [ 15.462477] IP-Config: Got DHCP answer from 10.66.16.15, my address is 10.66.27.116 2023-01-13T04:31:09 [ 15.470168] IP-Config: Complete: 2023-01-13T04:31:09 [ 15.473404] device=eth0, hwaddr=ac:1f:6b:1a:b3:4e, ipaddr=10.66.27.116, mask=255.255.240.0, gw=10.66.16.1 2023-01-13T04:31:09 [ 15.483421] host=10.66.27.116, domain=lkftlab, nis-domain=(none) 2023-01-13T04:31:09 [ 15.489876] bootserver=0.0.0.0, rootserver=10.66.16.124, rootpath= 2023-01-13T04:31:09 [ 15.489877] nameserver0=10.66.16.10 2023-01-13T04:31:09 [ 15.529269] cfg80211: Loading compiled-in X.509 certificates for regulatory database 2023-01-13T04:31:09 [ 15.537710] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' 2023-01-13T04:31:09 [ 15.544300] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 2023-01-13T04:31:09 [ 15.545394] ALSA device list: 2023-01-13T04:31:09 [ 15.552920] cfg80211: failed to load regulatory.db 2023-01-13T04:31:09 [ 15.560728] No soundcards found. 2023-01-13T04:31:09 [ 15.564380] md: Waiting for all devices to be available before autodetect 2023-01-13T04:31:09 [ 15.571186] md: If you don't use raid, use raid=noautodetect 2023-01-13T04:31:09 [ 15.576836] md: Autodetecting RAID arrays. 2023-01-13T04:31:09 [ 15.580953] md: autorun ... 2023-01-13T04:31:09 [ 15.583770] md: ... autorun DONE. 2023-01-13T04:31:09 [ 15.665422] VFS: Mounted root (nfs filesystem) on device 0:17. 2023-01-13T04:31:09 [ 15.672273] devtmpfs: mounted 2023-01-13T04:31:09 [ 15.676342] Freeing unused kernel image (initmem) memory: 3624K 2023-01-13T04:31:09 [ 15.684349] Write protecting the kernel read-only data: 30720k 2023-01-13T04:31:09 [ 15.690412] Freeing unused kernel image (rodata/data gap) memory: 172K 2023-01-13T04:31:09 [ 15.743593] x86/mm: Checked W+X mappings: passed, no W+X pages found. 2023-01-13T04:31:09 [ 15.750037] x86/mm: Checking user space page tables 2023-01-13T04:31:09 [ 15.799837] x86/mm: Checked W+X mappings: passed, no W+X pages found. 2023-01-13T04:31:09 [ 15.806286] Run /sbin/init as init process 2023-01-13T04:31:09 [ 15.945626] BUG: kernel NULL pointer dereference, address: 0000000000000008 2023-01-13T04:31:09 [ 15.952588] #PF: supervisor read access in kernel mode 2023-01-13T04:31:09 [ 15.957720] #PF: error_code(0x0000) - not-present page 2023-01-13T04:31:09 [ 15.962850] PGD 8000000103213067 P4D 8000000103213067 PUD 103212067 PMD 0 2023-01-13T04:31:09 [ 15.969724] Oops: 0000 [#1] PREEMPT SMP PTI 2023-01-13T04:31:09 [ 15.973909] CPU: 3 PID: 1 Comm: init Not tainted 6.2.0-rc3-next-20230113 #1 2023-01-13T04:31:09 [ 15.980869] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 2023-01-13T04:31:09 [ 15.988336] RIP: 0010:do_wp_page+0x236/0xef0 2023-01-13T04:31:09 [ 15.992611] Code: 83 ea 01 49 89 d7 48 85 d2 0f 85 00 ff ff ff 49 8b 7c 24 60 e8 0b f2 e9 00 41 8b 44 24 28 4d 8b 74 24 50 4d 8b 2c 24 89 45 88 <49> 8b 46 08 49 8b 5d 10 a8 01 0f 85 78 02 00 00 0f 1f 44 00 00 4c 2023-01-13T04:31:09 [ 16.011356] RSP: 0000:ffffb3f640027d18 EFLAGS: 00010286 2023-01-13T04:31:09 [ 16.016583] RAX: 0000000000000a55 RBX: 0400000000000080 RCX: 0000000000000000 2023-01-13T04:31:09 [ 16.023715] RDX: 0000000000000000 RSI: ffffffff8d3d2bd5 RDI: ffffffff8e271dfa 2023-01-13T04:31:09 [ 16.030838] RBP: ffffb3f640027db0 R08: 8000000432ee9225 R09: ffff8ac3431e3100 2023-01-13T04:31:09 [ 16.037962] R10: 0000000000000000 R11: 00007fe169f2f598 R12: ffffb3f640027de0 2023-01-13T04:31:09 [ 16.045087] R13: ffff8ac3431e2000 R14: 0000000000000000 R15: 0400000000000000 2023-01-13T04:31:09 [ 16.052211] FS: 00007fe16973e800(0000) GS:ffff8ac69fd80000(0000) knlGS:0000000000000000 2023-01-13T04:31:09 [ 16.060319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 2023-01-13T04:31:09 [ 16.066060] CR2: 0000000000000008 CR3: 00000001008d4002 CR4: 00000000003706e0 2023-01-13T04:31:09 [ 16.073183] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 2023-01-13T04:31:09 [ 16.080322] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 2023-01-13T04:31:09 [ 16.087446] Call Trace: 2023-01-13T04:31:09 [ 16.089893] <TASK> 2023-01-13T04:31:09 [ 16.091991] ? trace_preempt_off+0x2d/0xd0 2023-01-13T04:31:09 [ 16.096087] ? __handle_mm_fault+0x7ee/0x12f0 2023-01-13T04:31:09 [ 16.100439] __handle_mm_fault+0xabf/0x12f0 2023-01-13T04:31:09 [ 16.104617] handle_mm_fault+0xf8/0x320 2023-01-13T04:31:09 [ 16.108457] do_user_addr_fault+0x1d9/0x650 2023-01-13T04:31:09 [ 16.112642] exc_page_fault+0x6b/0x170 2023-01-13T04:31:09 [ 16.116394] asm_exc_page_fault+0x2b/0x30 2023-01-13T04:31:09 [ 16.120408] RIP: 0033:0x7fe169dbf31e 2023-01-13T04:31:09 [ 16.123986] Code: ba ff ff ff ff 0f 9f c0 0f b6 c0 0f 4c c2 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 41 54 31 c0 ba ff ff ff ff 53 48 83 ec 08 <f0> 0f b1 15 72 02 17 00 83 f8 ff 74 35 41 89 c4 85 c0 75 21 31 c0 2023-01-13T04:31:09 [ 16.142724] RSP: 002b:00007ffcd0edec80 EFLAGS: 00010202 2023-01-13T04:31:09 [ 16.147948] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000555bd8 2023-01-13T04:31:09 [ 16.155074] RDX: 00000000ffffffff RSI: 00007ffcd0edefa8 RDI: 0000000000000001 2023-01-13T04:31:09 [ 16.162198] RBP: 00007ffcd0edefa8 R08: 00007fe169bc5a10 R09: 00007fe169f37a10 2023-01-13T04:31:09 [ 16.169319] R10: 00007fe169adf3ee R11: 0000000000000246 R12: 00007ffcd0edefa8 2023-01-13T04:31:09 [ 16.176445] R13: 000000000041b9a0 R14: 0000000000555bd8 R15: 00007fe169f69000 2023-01-13T04:31:09 [ 16.183569] </TASK> 2023-01-13T04:31:09 [ 16.185752] Modules linked in: 2023-01-13T04:31:09 [ 16.188803] CR2: 0000000000000008 2023-01-13T04:31:09 [ 16.192114] ---[ end trace 0000000000000000 ]--- 2023-01-13T04:31:09 [ 16.196723] RIP: 0010:do_wp_page+0x236/0xef0 2023-01-13T04:31:09 Setting prompt string to ['-\[ cut here \]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing', 'root@intel-corei7-64:', 'root@(.*):[/~]#', 'login:', 'Login incorrect'] 2023-01-13T04:31:09 login-action: kernel 'warning' 2023-01-13T04:31:09 [login-action] Waiting for messages, (timeout 00:13:23) 2023-01-13T04:31:10 [ 16.200986] Code: 83 ea 01 49 89 d7 48 85 d2 0f 85 00 ff ff ff 49 8b 7c 24 60 e8 0b f2 e9 00 41 8b 44 24 28 4d 8b 74 24 50 4d 8b 2c 24 89 45 88 <49> 8b 46 08 49 8b 5d 10 a8 01 0f 85 78 02 00 00 0f 1f 44 00 00 4c 2023-01-13T04:31:10 [ 16.219724] RSP: 0000:ffffb3f640027d18 EFLAGS: 00010286 2023-01-13T04:31:10 [ 16.224943] RAX: 0000000000000a55 RBX: 0400000000000080 RCX: 0000000000000000 2023-01-13T04:31:10 [ 16.232065] RDX: 0000000000000000 RSI: ffffffff8d3d2bd5 RDI: ffffffff8e271dfa 2023-01-13T04:31:10 [ 16.239197] RBP: ffffb3f640027db0 R08: 8000000432ee9225 R09: ffff8ac3431e3100 2023-01-13T04:31:10 [ 16.246324] R10: 0000000000000000 R11: 00007fe169f2f598 R12: ffffb3f640027de0 2023-01-13T04:31:10 [ 16.253447] R13: ffff8ac3431e2000 R14: 0000000000000000 R15: 0400000000000000 2023-01-13T04:31:10 [ 16.260571] FS: 00007fe16973e800(0000) GS:ffff8ac69fd80000(0000) knlGS:0000000000000000 2023-01-13T04:31:10 [ 16.268646] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 2023-01-13T04:31:10 [ 16.274384] CR2: 0000000000000008 CR3: 00000001008d4002 CR4: 00000000003706e0 2023-01-13T04:31:10 [ 16.281510] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 2023-01-13T04:31:10 [ 16.288641] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 2023-01-13T04:31:10 Matched prompt #9: Kernel panic - not syncing 2023-01-13T04:31:10 Setting prompt string to ['end Kernel panic[^\r]*\r\n', 'root@intel-corei7-64:', 'root@(.*):[/~]#', 'login:', 'Login incorrect'] 2023-01-13T04:31:10 [ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 2023-01-13T04:31:10 [ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) 2023-01-13T04:31:10 [ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]--- 2023-01-13T04:31:10 Setting prompt string to ['-\[ cut here \]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing', 'root@intel-corei7-64:', 'root@(.*):[/~]#', 'login:', 'Login incorrect'] 2023-01-13T04:31:10 login-action kernel 'panic' 2023-01-13T04:31:10 {'case': 'kernel-messages', 'definition': 'lava', 'duration': '17.38', 'extra': {'extra': [{'kind': 'warning', 'message': '[ 1.400214] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible!\r\n[ 1.401214] RETBleed: Vulnerable\r\n[ 1.402214] Speculative Store Bypass: Vulnerable\r\n[ 1.403220] MDS: Vulnerable: Clear CPU buffers attempted, no microcode\r\n[ 1.404214] TAA: Vulnerable: Clear CPU buffers attempted, no microcode\r\n[ 1.405214] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode\r\n[ 1.406214] SRBDS: Vulnerable: No microcode\r\n[ 1.430344] Freeing SMP alternatives memory: 52K\r\n[ 1.432275] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1220 v6 @ 3.00GHz (family: 0x6, model: 0x9e, stepping: 0x9)\r\n[ 1.433327] cblist_init_generic: Setting adjustable number of callback queues.\r\n[ 1.434215] cblist_init_generic: Setting shift to 2 and lim to 1.\r\n[ 1.435227] cblist_init_generic: Setting shift to 2 and lim to 1.\r\n[ 1.436227] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.\r\n[ 1.437215] ... version: 4\r\n[ 1.438214] ... bit width: 48\r\n[ 1.439214] ... generic registers: 8\r\n[ 1.440214] ... value mask: 0000ffffffffffff\r\n[ 1.441214] ... max period: 00007fffffffffff\r\n[ 1.442214] ... fixed-purpose events: 3\r\n[ 1.443214] ... event mask: 00000007000000ff\r\n[ 1.444338] Estimated ratio of average max frequency by base frequency (times 1024): 1126\r\n[ 1.445230] rcu: Hierarchical SRCU implementation.\r\n[ 1.446214] rcu: \tMax phase no-delay instances is 400.\r\n[ 1.447456] smp: Bringing up secondary CPUs ...\r\n[ 1.448283] x86: Booting SMP configuration:\r\n[ 1.449215] .... node #0, CPUs: #1 #2 #3\r\n[ 1.450634] smp: Brought up 1 node, 4 CPUs\r\n[ 1.452214] smpboot: Max logical packages: 1\r\n[ 1.453214] smpboot: Total of 4 processors activated (24000.00 BogoMIPS)\r\n[ 1.455538] devtmpfs: initialized\r\n[ 1.456363] ACPI: PM: Registering ACPI NVS region [mem 0x88767000-0x88767fff] (4096 bytes)\r\n[ 1.457215] ACPI: PM: Registering ACPI NVS region [mem 0x8d11f000-0x8d891fff] (7811072 bytes)\r\n[ 1.458325] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns\r\n[ 1.459216] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)\r\n[ 1.460385] PM: RTC time: 04:30:54, date: 2023-01-13\r\n[ 1.461276] NET: Registered PF_NETLINK/PF_ROUTE protocol family\r\n[ 1.462290] audit: initializing netlink subsys (disabled)\r\n[ 1.463232] audit: type=2000 audit(1673584252.085:1): state=initialized audit_enabled=0 res=1\r\n[ 1.463277] thermal_sys: Registered thermal governor 'step_wise'\r\n[ 1.464215] thermal_sys: Registered thermal governor 'user_space'\r\n[ 1.465223] cpuidle: using governor menu\r\n[ 1.475303] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)\r\n[ 1.484216] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as E820 entry\r\n[ 1.491222] PCI: Using configuration type 1 for base access\r\n[ 1.497321] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'\r\n[ 1.498243] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.\r\n[ 1.499240] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages\r\n[ 1.500215] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page\r\n[ 1.501250] cryptd: max_cpu_qlen set to 1000\r\n[ 1.502281] ACPI: Added _OSI(Module Device)\r\n[ 1.503216] ACPI: Added _OSI(Processor Device)\r\n[ 1.504214] ACPI: Added _OSI(3.0 _SCP Extensions)\r\n[ 1.505214] ACPI: Added _OSI(Processor Aggregator Device)\r\n[ 1.529435] ACPI: 7 ACPI AML tables successfully acquired and loaded\r\n[ 1.533265] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored\r\n[ 1.536216] ACPI: Dynamic OEM Table Load:\r\n[ 1.539907] ACPI: Dynamic OEM Table Load:\r\n[ 1.540219] ACPI: SSDT 0xFFFF8AC34098A800 000660 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)\r\n[ 1.542694] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked\r\n[ 1.544381] ACPI: Dynamic OEM Table Load:\r\n[ 1.545217] ACPI: SSDT 0xFFFF8AC340354800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)\r\n[ 1.548237] ACPI: Dynamic OEM Table Load:\r\n[ 1.549223] ACPI: SSDT 0xFFFF8AC34098B800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)\r\n[ 1.551871] ACPI: Dynamic OEM Table Load:\r\n[ 1.552216] ACPI: SSDT 0xFFFF8AC34084B600 000119 (v02 PmRef ApCst 00003000 INTL 20120913)\r\n[ 1.557169] ACPI: Interpreter enabled\r\n[ 1.557241] ACPI: PM: (supports S0 S4 S5)\r\n[ 1.558220] ACPI: Using IOAPIC for interrupt routing\r\n[ 1.559243] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug\r\n[ 1.560214] PCI: Using E820 reservations for host bridge windows\r\n[ 1.561977] ACPI: Enabled 8 GPEs in block 00 to 7F\r\n[ 1.564212] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource\r\n[ 1.564689] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource\r\n[ 1.565490] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource\r\n[ 1.568791] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource\r\n[ 1.569550] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource\r\n[ 1.570467] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource\r\n[ 1.571468] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource\r\n[ 1.572466] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource\r\n[ 1.573465] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource\r\n[ 1.574509] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource\r\n[ 1.575488] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource\r\n[ 1.576489] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource\r\n[ 1.577488] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource\r\n[ 1.578465] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource\r\n[ 1.579464] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource\r\n[ 1.580510] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource\r\n[ 1.581657] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource\r\n[ 1.582549] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource\r\n[ 1.583478] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource\r\n[ 1.584480] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource\r\n[ 1.585478] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource\r\n[ 1.586469] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource\r\n[ 1.587465] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource\r\n[ 1.596917] ACPI: \_TZ_.FN00: New power resource\r\n[ 1.597287] ACPI: \_TZ_.FN01: New power resource\r\n[ 1.598285] ACPI: \_TZ_.FN02: New power resource\r\n[ 1.599285] ACPI: \_TZ_.FN03: New power resource\r\n[ 1.600283] ACPI: \_TZ_.FN04: New power resource\r\n[ 1.602474] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])\r\n[ 1.603218] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]\r\n[ 1.605253] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR]\r\n[ 1.607085] PCI host bridge to bus 0000:00\r\n[ 1.607215] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]\r\n[ 1.608214] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]\r\n[ 1.609214] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]\r\n[ 1.610214] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]\r\n[ 1.611214] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]\r\n[ 1.612214] pci_bus 0000:00: root bus resource [bus 00-fe]\r\n[ 1.613299] pci 0000:00:00.0: [8086:5918] type 00 class 0x060000\r\n[ 1.614372] pci 0000:00:13.0: [8086:a135] type 00 class 0x000000\r\n[ 1.615232] pci 0000:00:13.0: reg 0x10: [mem 0xdf322000-0xdf322fff 64bit]\r\n[ 1.616477] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330\r\n[ 1.617229] pci 0000:00:14.0: reg 0x10: [mem 0xdf300000-0xdf30ffff 64bit]\r\n[ 1.618277] pci 0000:00:14.0: PME# supported from D3hot D3cold\r\n[ 1.619746] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000\r\n[ 1.620229] pci 0000:00:14.2: reg 0x10: [mem 0xdf321000-0xdf321fff 64bit]\r\n[ 1.621410] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000\r\n[ 1.622248] pci 0000:00:16.0: reg 0x10: [mem 0xdf320000-0xdf320fff 64bit]\r\n[ 1.623344] pci 0000:00:16.0: PME# supported from D3hot\r\n[ 1.624337] pci 0000:00:16.1: [8086:a13b] type 00 class 0x078000\r\n[ 1.625248] pci 0000:00:16.1: reg 0x10: [mem 0xdf31f000-0xdf31ffff 64bit]\r\n[ 1.626344] pci 0000:00:16.1: PME# supported from D3hot\r\n[ 1.627340] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601\r\n[ 1.628224] pci 0000:00:17.0: reg 0x10: [mem 0xdf310000-0xdf311fff]\r\n[ 1.629219] pci 0000:00:17.0: reg 0x14: [mem 0xdf31e000-0xdf31e0ff]\r\n[ 1.630219] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]\r\n[ 1.631219] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]\r\n[ 1.632219] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]\r\n[ 1.633219] pci 0000:00:17.0: reg 0x24: [mem 0xdf31d000-0xdf31d7ff]\r\n[ 1.634252] pci 0000:00:17.0: PME# supported from D3hot\r\n[ 1.635456] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400\r\n[ 1.636293] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold\r\n[ 1.637628] pci 0000:00:1c.1: [8086:a111] type 01 class 0x060400\r\n[ 1.638292] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold\r\n[ 1.639629] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400\r\n[ 1.640280] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold\r\n[ 1.641619] pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100\r\n[ 1.642555] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000\r\n[ 1.643227] pci 0000:00:1f.2: reg 0x10: [mem 0xdf318000-0xdf31bfff]\r\n[ 1.644483] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500\r\n[ 1.645269] pci 0000:00:1f.4: reg 0x10: [mem 0xdf31c000-0xdf31c0ff 64bit]\r\n[ 1.646282] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]\r\n[ 1.647537] pci 0000:01:00.0: working around ROM BAR overlap defect\r\n[ 1.648215] pci 0000:01:00.0: [8086:1533] type 00 class 0x020000\r\n[ 1.649245] pci 0000:01:00.0: reg 0x10: [mem 0xdf200000-0xdf27ffff]\r\n[ 1.650246] pci 0000:01:00.0: reg 0x18: [io 0xe000-0xe01f]\r\n[ 1.651234] pci 0000:01:00.0: reg 0x1c: [mem 0xdf280000-0xdf283fff]\r\n[ 1.652371] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold\r\n[ 1.653497] pci 0000:00:1c.0: PCI bridge to [bus 01]\r\n[ 1.654216] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]\r\n[ 1.655215] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]\r\n[ 1.656297] pci 0000:02:00.0: working around ROM BAR overlap defect\r\n[ 1.657214] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000\r\n[ 1.658244] pci 0000:02:00.0: reg 0x10: [mem 0xdf100000-0xdf17ffff]\r\n[ 1.659246] pci 0000:02:00.0: reg 0x18: [io 0xd000-0xd01f]\r\n[ 1.660234] pci 0000:02:00.0: reg 0x1c: [mem 0xdf180000-0xdf183fff]\r\n[ 1.661370] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold\r\n[ 1.662495] pci 0000:00:1c.1: PCI bridge to [bus 02]\r\n[ 1.663216] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]\r\n[ 1.664215] pci 0000:00:1c.1: bridge window [mem 0xdf100000-0xdf1fffff]\r\n[ 1.665277] pci 0000:03:00.0: [1a03:1150] type 01 class 0x060400\r\n[ 1.666275] pci 0000:03:00.0: enabling Extended Tags\r\n[ 1.667292] pci 0000:03:00.0: supports D1 D2\r\n[ 1.668214] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold\r\n[ 1.669488] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'\r\n[ 1.670222] pci 0000:00:1c.6: PCI bridge to [bus 03-04]\r\n[ 1.671215] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]\r\n[ 1.672215] pci 0000:00:1c.6: bridge window [mem 0xde000000-0xdf0fffff]\r\n[ 1.673258] pci_bus 0000:04: extended config space not accessible\r\n[ 1.674245] pci 0000:04:00.0: [1a03:2000] type 00 class 0x030000\r\n[ 1.675234] pci 0000:04:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]\r\n[ 1.676225] pci 0000:04:00.0: reg 0x14: [mem 0xdf000000-0xdf01ffff]\r\n[ 1.677225] pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc07f]\r\n[ 1.678278] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]\r\n[ 1.679254] pci 0000:04:00.0: supports D1 D2\r\n[ 1.680216] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold\r\n[ 1.681320] pci 0000:03:00.0: PCI bridge to [bus 04]\r\n[ 1.682220] pci 0000:03:00.0: bridge window [io 0xc000-0xcfff]\r\n[ 1.683217] pci 0000:03:00.0: bridge window [mem 0xde000000-0xdf0fffff]\r\n[ 1.686060] ACPI: PCI: Interrupt link LNKA configured for IRQ 11\r\n[ 1.686277] ACPI: PCI: Interrupt link LNKB configured for IRQ 10\r\n[ 1.687274] ACPI: PCI: Interrupt link LNKC configured for IRQ 11\r\n[ 1.688274] ACPI: PCI: Interrupt link LNKD configured for IRQ 11\r\n[ 1.689275] ACPI: PCI: Interrupt link LNKE configured for IRQ 11\r\n[ 1.690275] ACPI: PCI: Interrupt link LNKF configured for IRQ 11\r\n[ 1.691270] ACPI: PCI: Interrupt link LNKG configured for IRQ 11\r\n[ 1.692273] ACPI: PCI: Interrupt link LNKH configured for IRQ 11\r\n[ 1.698764] iommu: Default domain type: Translated \r\n[ 1.699215] iommu: DMA domain TLB invalidation policy: lazy mode \r\n[ 1.700257] SCSI subsystem initialized\r\n[ 1.701244] ACPI: bus type USB registered\r\n[ 1.702224] usbcore: registered new interface driver usbfs\r\n[ 1.703218] usbcore: registered new interface driver hub\r\n[ 1.704219] usbcore: registered new device driver usb\r\n[ 1.705224] mc: Linux media interface: v0.10\r\n[ 1.706219] videodev: Linux video capture interface: v2.00\r\n[ 1.707217] pps_core: LinuxPPS API ver. 1 registered\r\n[ 1.708214] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it\r\n[ 1.709215] PTP clock support registered\r\n[ 1.710237] Advanced Linux Sound Architecture Driver Initialized.\r\n[ 1.711378] NetLabel: Initializing\r\n[ 1.712214] NetLabel: domain hash size = 128\r\n[ 1.713214] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO\r\n[ 1.714227] NetLabel: unlabeled traffic allowed by default\r\n[ 1.715228] PCI: Using ACPI for IRQ routing\r\n[ 1.744100] pci 0000:04:00.0: vgaarb: setting as boot VGA device\r\n[ 1.744213] pci 0000:04:00.0: vgaarb: bridge control possible\r\n[ 1.744213] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none\r\n[ 1.744215] vgaarb: loaded\r\n[ 1.745255] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0\r\n[ 1.746214] hpet0: 8 comparators, 64-bit 24.000000 MHz counter\r\n[ 1.749241] clocksource: Switched to clocksource tsc-early\r\n[ 1.754785] VFS: Disk quotas dquot_6.6.0\r\n[ 1.758722] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)\r\n[ 1.765646] pnp: PnP ACPI init\r\n[ 1.769016] system 00:00: [io 0x0a00-0x0a0f] has been reserved\r\n[ 1.774949] system 00:00: [io 0x0a10-0x0a1f] has been reserved\r\n[ 1.780866] system 00:00: [io 0x0a20-0x0a2f] has been reserved\r\n[ 1.786785] system 00:00: [io 0x0a30-0x0a3f] has been reserved\r\n[ 1.792703] system 00:00: [io 0x0a40-0x0a4f] has been reserved\r\n[ 1.799361] system 00:03: [io 0x0680-0x069f] has been reserved\r\n[ 1.805291] system 00:03: [io 0xffff] has been reserved\r\n[ 1.810609] system 00:03: [io 0xffff] has been reserved\r\n[ 1.815920] system 00:03: [io 0xffff] has been reserved\r\n[ 1.821225] system 00:03: [io 0x1800-0x18fe] has been reserved\r\n[ 1.827144] system 00:03: [io 0x164e-0x164f] has been reserved\r\n[ 1.833136] system 00:04: [io 0x0800-0x087f] has been reserved\r\n[ 1.839116] system 00:06: [io 0x1854-0x1857] has been reserved\r\n[ 1.845290] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved\r\n[ 1.851921] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved\r\n[ 1.858541] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved\r\n[ 1.865147] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved\r\n[ 1.871759] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved\r\n[ 1.878371] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved\r\n[ 1.884984] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved\r\n[ 1.891595] system 00:07: [mem 0xff000000-0xffffffff] has been reserved\r\n[ 1.898199] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved\r\n[ 1.905150] system 00:07: [mem 0xdffe0000-0xdfffffff] has been reserved\r\n[ 1.911803] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved\r\n[ 1.918418] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved\r\n[ 1.925031] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved\r\n[ 1.931645] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved\r\n[ 1.938605] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved\r\n[ 1.945215] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved\r\n[ 1.951827] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved\r\n[ 1.958649] system 00:09: [io 0xff00-0xfffe] has been reserved\r\n[ 1.965425] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved\r\n[ 1.972048] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved\r\n[ 1.978658] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved\r\n[ 1.985976] pnp: PnP ACPI: found 11 devices\r\n[ 1.995942] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns\r\n[ 2.004825] NET: Registered PF_INET protocol family\r\n[ 2.009834] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)\r\n[ 2.020017] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)\r\n[ 2.028640] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)\r\n[ 2.036391] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)\r\n[ 2.044577] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)\r\n[ 2.052212] TCP: Hash tables configured (established 131072 bind 65536)\r\n[ 2.058896] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)\r\n[ 2.066503] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)\r\n[ 2.073320] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)\r\n[ 2.080595] NET: Registered PF_UNIX/PF_LOCAL protocol family\r\n[ 2.086324] RPC: Registered named UNIX socket transport module.\r\n[ 2.092251] RPC: Registered udp transport module.\r\n[ 2.096956] RPC: Registered tcp transport module.\r\n[ 2.101659] RPC: Registered tcp NFSv4.1 backchannel transport module.\r\n[ 2.108313] pci 0000:00:1c.0: PCI bridge to [bus 01]\r\n[ 2.113290] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]\r\n[ 2.119387] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]\r\n[ 2.126175] pci 0000:00:1c.1: PCI bridge to [bus 02]\r\n[ 2.131136] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]\r\n[ 2.137231] pci 0000:00:1c.1: bridge window [mem 0xdf100000-0xdf1fffff]\r\n[ 2.144020] pci 0000:03:00.0: PCI bridge to [bus 04]\r\n[ 2.148981] pci 0000:03:00.0: bridge window [io 0xc000-0xcfff]\r\n[ 2.155076] pci 0000:03:00.0: bridge window [mem 0xde000000-0xdf0fffff]\r\n[ 2.161865] pci 0000:00:1c.6: PCI bridge to [bus 03-04]\r\n[ 2.167083] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]\r\n[ 2.173176] pci 0000:00:1c.6: bridge window [mem 0xde000000-0xdf0fffff]\r\n[ 2.179967] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]\r\n[ 2.186142] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]\r\n[ 2.192320] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]\r\n[ 2.199194] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]\r\n[ 2.206064] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]\r\n[ 2.212929] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]\r\n[ 2.218500] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf2fffff]\r\n[ 2.224760] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]\r\n[ 2.230330] pci_bus 0000:02: resource 1 [mem 0xdf100000-0xdf1fffff]\r\n[ 2.236589] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]\r\n[ 2.242160] pci_bus 0000:03: resource 1 [mem 0xde000000-0xdf0fffff]\r\n[ 2.248418] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]\r\n[ 2.253989] pci_bus 0000:04: resource 1 [mem 0xde000000-0xdf0fffff]\r\n[ 2.265143] PCI: CLS 0 bytes, default 64\r\n[ 2.269081] DMAR: Host address width 39\r\n[ 2.272927] DMAR: DRHD base: 0x000000fed90000 flags: 0x1\r\n[ 2.278244] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da\r\n[ 2.286160] DMAR: RMRR base: 0x0000008ccae000 end: 0x0000008cccdfff\r\n[ 2.292432] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)\r\n[ 2.298873] software IO TLB: mapped [mem 0x0000000088ba1000-0x000000008cba1000] (64MB)\r\n[ 2.306823] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer\r\n[ 2.314744] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules\r\n[ 2.320487] RAPL PMU: hw unit of domain package 2^-14 Joules\r\n[ 2.326137] RAPL PMU: hw unit of domain dram 2^-14 Joules\r\n[ 2.335047] kvm: already loaded vendor module 'kvm_intel'\r\n[ 2.341150] Initialise system trusted keyrings\r\n[ 2.345632] workingset: timestamp_bits=40 max_order=22 bucket_order=0\r\n[ 2.352182] NFS: Registering the id_resolver key type\r\n[ 2.357246] Key type id_resolver registered\r\n[ 2.361438] Key type id_legacy registered\r\n[ 2.365475] 9p: Installing v9fs 9p2000 file system support\r\n[ 2.378638] NET: Registered PF_ALG protocol family\r\n[ 2.383441] Key type asymmetric registered\r\n[ 2.387538] Asymmetric key parser 'x509' registered\r\n[ 2.392418] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\r\n[ 2.399828] io scheduler mq-deadline registered\r\n[ 2.404370] io scheduler kyber registered\r\n[ 2.408615] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24\r\n[ 2.414594] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25\r\n[ 2.420558] pcieport 0000:00:1c.6: PME: Signaling with IRQ 26\r\n[ 2.426511] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0\r\n[ 2.434891] ACPI: button: Sleep Button [SLPB]\r\n[ 2.439288] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1\r\n[ 2.447657] ACPI: button: Power Button [PWRB]\r\n[ 2.452052] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2\r\n[ 2.459481] ACPI: button: Power Button [PWRF]\r\n[ 2.464189] ACPI: \_PR_.CPU0: Found 3 idle states\r\n[ 2.469065] ACPI: \_PR_.CPU1: Found 3 idle states\r\n[ 2.473940] ACPI: \_PR_.CPU2: Found 3 idle states\r\n[ 2.478825] ACPI: \_PR_.CPU3: Found 3 idle states\r\n[ 2.483994] thermal LNXTHERM:00: registered as thermal_zone0\r\n[ 2.489667] ACPI: thermal: Thermal Zone [TZ00] (28 C)\r\n[ 2.494838] thermal LNXTHERM:01: registered as thermal_zone1\r\n[ 2.500508] ACPI: thermal: Thermal Zone [TZ01] (30 C)\r\n[ 2.505653] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled\r\n[ 2.511997] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A\r\n[ 2.519412] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A\r\n[ 2.527204] Non-volatile memory driver v1.3\r\n[ 2.531406] Linux agpgart interface v0.103\r\n[ 2.535629] ACPI: bus type drm_connector registered\r\n[ 2.541968] loop: module loaded\r\n[ 2.555758] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode\r\n[ 2.563941] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst \r\n[ 2.595156] scsi host0: ahci\r\n[ 2.598363] scsi host1: ahci\r\n[ 2.601529] scsi host2: ahci\r\n[ 2.604741] scsi host3: ahci\r\n[ 2.607933] scsi host4: ahci\r\n[ 2.611111] scsi host5: ahci\r\n[ 2.614226] scsi host6: ahci\r\n[ 2.617379] scsi host7: ahci\r\n[ 2.620327] ata1: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d100 irq 27\r\n[ 2.627722] ata2: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d180 irq 27\r\n[ 2.635114] ata3: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d200 irq 27\r\n[ 2.642504] ata4: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d280 irq 27\r\n[ 2.649888] ata5: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d300 irq 27\r\n[ 2.657271] ata6: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d380 irq 27\r\n[ 2.664656] ata7: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d400 irq 27\r\n[ 2.672041] ata8: SATA max UDMA/133 abar m2048@0xdf31d000 port 0xdf31d480 irq 27\r\n[ 2.679742] e100: Intel(R) PRO/100 Network Driver\r\n[ 2.684460] e100: Copyright(c) 1999-2006 Intel Corporation\r\n[ 2.689959] e1000: Intel(R) PRO/1000 Network Driver\r\n[ 2.694843] e1000: Copyright (c) 1999-2006 Intel Corporation.\r\n[ 2.700595] e1000e: Intel(R) PRO/1000 Network Driver\r\n[ 2.705571] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.\r\n[ 2.711498] igb: Intel(R) Gigabit Ethernet Network Driver\r\n[ 2.716907] igb: Copyright (c) 2007-2014 Intel Corporation.\r\n[ 2.750538] pps pps0: new PPS source ptp0\r\n[ 2.754645] igb 0000:01:00.0: added PHC on eth0\r\n[ 2.759193] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection\r\n[ 2.766062] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) ac:1f:6b:1a:b3:4e\r\n[ 2.773242] igb 0000:01:00.0: eth0: PBA No: 012700-000\r\n[ 2.778378] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)\r\n[ 2.816488] pps pps1: new PPS source ptp1\r\n[ 2.820594] igb 0000:02:00.0: added PHC on eth1\r\n[ 2.825137] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection\r\n[ 2.832013] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) ac:1f:6b:1a:b3:4f\r\n[ 2.839205] igb 0000:02:00.0: eth1: PBA No: 012700-000\r\n[ 2.844335] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)\r\n[ 2.851939] sky2: driver version 1.30\r\n[ 2.855629] QLogic FastLinQ 4xxxx Core Module qed\r\n[ 2.860345] qede init: QLogic FastLinQ 4xxxx Ethernet Driver qede\r\n[ 2.866462] usbcore: registered new interface driver asix\r\n[ 2.871873] usbcore: registered new interface driver ax88179_178a\r\n[ 2.877969] usbcore: registered new interface driver cdc_ether\r\n[ 2.883810] usbcore: registered new interface driver net1080\r\n[ 2.889475] usbcore: registered new interface driver cdc_subset\r\n[ 2.895395] usbcore: registered new interface driver zaurus\r\n[ 2.900967] usbcore: registered new interface driver cdc_ncm\r\n[ 2.906630] usbcore: registered new interface driver r8153_ecm\r\n[ 2.912606] usbcore: registered new interface driver usblp\r\n[ 2.912777] xhci_hcd 0000:00:14.0: xHCI Host Controller\r\n[ 2.918103] usbcore: registered new interface driver usb-storage\r\n[ 2.923418] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1\r\n[ 2.929361] i8042: PNP: No PS/2 controller found.\r\n[ 2.937858] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810\r\n[ 2.941747] rtc_cmos 00:05: RTC can wake from S4\r\n[ 2.950994] xhci_hcd 0000:00:14.0: xHCI Host Controller\r\n[ 2.955966] rtc_cmos 00:05: registered as rtc0\r\n[ 2.960512] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2\r\n[ 2.964893] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram\r\n[ 2.972254] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed\r\n[ 2.978966] fail to initialize ptp_kvm\r\n[ 2.979147] i801_smbus 0000:00:1f.4: SPD Write Disable is set\r\n[ 2.979201] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt\r\n[ 2.979255] pci 0000:00:1f.1: [8086:a120] type 00 class 0x058000\r\n[ 2.979321] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit]\r\n[ 2.980530] i2c i2c-0: 2/4 memory slots populated (from DMI)\r\n[ 2.982802] ata2: SATA link down (SStatus 0 SControl 300)\r\n[ 2.982902] ata4: SATA link down (SStatus 0 SControl 300)\r\n[ 2.983969] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)\r\n[ 2.985210] ata5: SATA link down (SStatus 0 SControl 300)\r\n[ 2.985270] ata6: SATA link down (SStatus 0 SControl 300)\r\n[ 2.985332] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02\r\n[ 2.985334] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1\r\n[ 2.985335] usb usb1: Product: xHCI Host Controller\r\n[ 2.985337] usb usb1: Manufacturer: Linux 6.2.0-rc3-next-20230113 xhci-hcd\r\n[ 2.985338] usb usb1: SerialNumber: 0000:00:14.0\r\n[ 2.985571] hub 1-0:1.0: USB hub found\r\n[ 2.985604] hub 1-0:1.0: 16 ports detected\r\n[ 2.987391] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02\r\n[ 2.987394] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1\r\n[ 2.987395] usb usb2: Product: xHCI Host Controller\r\n[ 2.987396] usb usb2: Manufacturer: Linux 6.2.0-rc3-next-20230113 xhci-hcd\r\n[ 2.987397] usb usb2: SerialNumber: 0000:00:14.0\r\n[ 2.987478] hub 2-0:1.0: USB hub found\r\n[ 2.987500] hub 2-0:1.0: 10 ports detected\r\n[ 2.988211] usb: port power management may be unreliable\r\n[ 2.995251] i2c i2c-0: Successfully instantiated SPD at 0x51\r\n[ 3.000633] ata7: SATA link down (SStatus 0 SControl 300)\r\n[ 3.007167] i2c i2c-0: Successfully instantiated SPD at 0x53\r\n[ 3.011328] kwatchdog (84) used greatest stack depth: 15624 bytes left\r\n[ 3.013441] ata1: SATA link down (SStatus 0 SControl 300)\r\n[ 3.013534] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com\r\n[ 3.013540] intel_pstate: Intel P-state driver initializing\r\n[ 3.041506] intel_pstate: Disabling energy efficiency optimization\r\n[ 3.046887] ata8: SATA link down (SStatus 0 SControl 300)\r\n[ 3.055073] intel_pstate: HWP enabled\r\n[ 3.055566] kworker/u8:1 (89) used greatest stack depth: 14392 bytes left\r\n[ 3.062297] ata3.00: ATA-8: TOSHIBA MG03ACA100, FL1A, max UDMA/100\r\n[ 3.067617] hid: raw HID events driver (C) Jiri Kosina\r\n[ 3.074594] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA\r\n[ 3.078752] usbcore: registered new interface driver usbhid\r\n[ 3.083395] ata3.00: configured for UDMA/100\r\n[ 3.086502] usbhid: USB HID core driver\r\n[ 3.087089] Initializing XFRM netlink socket\r\n[ 3.094840] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1A PQ: 0 ANSI: 5\r\n[ 3.101993] NET: Registered PF_INET6 protocol family\r\n[ 3.106975] scsi 2:0:0:0: Attached scsi generic sg0 type 0\r\n[ 3.107064] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)\r\n[ 3.107129] sd 2:0:0:0: [sda] Write Protect is off\r\n[ 3.107149] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA\r\n[ 3.107171] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes\r\n[ 3.113947] Segment Routing with IPv6\r\n[ 3.231252] usb 1-6: new high-speed USB device number 2 using xhci_hcd\r\n[ 3.232351] In-situ OAM (IOAM) with IPv6\r\n[ 3.292643] sd 2:0:0:0: [sda] Attached SCSI disk\r\n[ 3.292655] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver\r\n[ 3.303296] NET: Registered PF_PACKET protocol family\r\n[ 3.308375] 9pnet: Installing 9P2000 support\r\n[ 3.312702] Key type dns_resolver registered\r\n[ 3.317639] microcode: Microcode Update Driver: v2.2.\r\n[ 3.317644] IPI shorthand broadcast: enabled\r\n[ 3.327042] AVX2 version of gcm_enc/dec engaged.\r\n[ 3.332261] AES CTR mode by8 optimization enabled\r\n[ 3.339544] sched_clock: Marking stable (2035178977, 1304035566)->(4501291417, -1162076874)\r\n[ 3.348097] registered taskstats version 1\r\n[ 3.352222] Loading compiled-in X.509 certificates\r\n[ 3.358696] PM: Magic number: 7:843:514\r\n[ 3.362776] platform ACPI000C:00: hash matches\r\n[ 3.367254] acpi ACPI000C:00: hash matches\r\n[ 3.367898] usb 1-6: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00\r\n[ 3.371390] printk: console [netcon0] enabled\r\n[ 3.379541] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3\r\n[ 3.383898] netconsole: network logging started\r\n[ 3.391022] usb 1-6: Product: Cruzer Blade\r\n[ 3.393286] tsc: Refined TSC clocksource calibration: 2999.967 MHz\r\n[ 3.393290] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e261bc34, max_idle_ns: 440795261167 ns\r\n[ 3.415809] usb 1-6: Manufacturer: SanDisk\r\n[ 3.419907] usb 1-6: SerialNumber: 20042103220284D0CB42\r\n[ 3.425137] clocksource: Switched to clocksource tsc\r\n[ 3.426141] usb-storage 1-6:1.0: USB Mass Storage device detected\r\n[ 3.436521] scsi host8: usb-storage 1-6:1.0\r\n[ 3.554432] usb 1-14: new high-speed USB device number 3 using xhci_hcd\r\n[ 3.687893] usb 1-14: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00\r\n[ 3.696194] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0\r\n[ 3.705172] hub 1-14:1.0: USB hub found\r\n[ 3.709202] hub 1-14:1.0: 4 ports detected\r\n[ 4.005425] usb 1-14.1: new low-speed USB device number 4 using xhci_hcd\r\n[ 4.117348] usb 1-14.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00\r\n[ 4.125801] usb 1-14.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0\r\n[ 4.140645] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.1/1-14.1:1.0/0003:0557:2419.0001/input/input3\r\n[ 4.205048] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-14.1/input0\r\n[ 4.218431] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.1/1-14.1:1.1/0003:0557:2419.0002/input/input4\r\n[ 4.230503] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-14.1/input1\r\n[ 4.482040] scsi 8:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6\r\n[ 4.492945] sd 8:0:0:0: Attached scsi generic sg1 type 0\r\n[ 4.498775] sd 8:0:0:0: [sdb] 30595072 512-byte logical blocks: (15.7 GB/14.6 GiB)\r\n[ 4.508178] sd 8:0:0:0: [sdb] Write Protect is off\r\n[ 4.513770] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA\r\n[ 4.527531] sdb: sdb3 sdb4\r\n[ 4.530518] sd 8:0:0:0: [sdb] Attached SCSI removable disk\r\n[ 6.279091] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX\r\n[ 6.288551] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready\r\n[ 6.306446] Sending DHCP requests ..., OK\r\n[ 15.462477] IP-Config: Got DHCP answer from 10.66.16.15, my address is 10.66.27.116\r\n[ 15.470168] IP-Config: Complete:\r\n[ 15.473404] device=eth0, hwaddr=ac:1f:6b:1a:b3:4e, ipaddr=10.66.27.116, mask=255.255.240.0, gw=10.66.16.1\r\n[ 15.483421] host=10.66.27.116, domain=lkftlab, nis-domain=(none)\r\n[ 15.489876] bootserver=0.0.0.0, rootserver=10.66.16.124, rootpath=\r\n[ 15.489877] nameserver0=10.66.16.10\r\n[ 15.529269] cfg80211: Loading compiled-in X.509 certificates for regulatory database\r\n[ 15.537710] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\r\n[ 15.544300] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\r\n[ 15.545394] ALSA device list:\r\n[ 15.552920] cfg80211: failed to load regulatory.db\r\n[ 15.560728] No soundcards found.\r\n[ 15.564380] md: Waiting for all devices to be available before autodetect\r\n[ 15.571186] md: If you don't use raid, use raid=noautodetect\r\n[ 15.576836] md: Autodetecting RAID arrays.\r\n[ 15.580953] md: autorun ...\r\n[ 15.583770] md: ... autorun DONE.\r\n[ 15.665422] VFS: Mounted root (nfs filesystem) on device 0:17.\r\n[ 15.672273] devtmpfs: mounted\r\n[ 15.676342] Freeing unused kernel image (initmem) memory: 3624K\r\n[ 15.684349] Write protecting the kernel read-only data: 30720k\r\n[ 15.690412] Freeing unused kernel image (rodata/data gap) memory: 172K\r\n[ 15.743593] x86/mm: Checked W+X mappings: passed, no W+X pages found.\r\n[ 15.750037] x86/mm: Checking user space page tables\r\n[ 15.799837] x86/mm: Checked W+X mappings: passed, no W+X pages found.\r\n[ 15.806286] Run /sbin/init as init process\r\n[ 15.945626] BUG: kernel NULL pointer dereference, address: 0000000000000008\r\n[ 15.952588] #PF: supervisor read access in kernel mode\r\n[ 15.957720] #PF: error_code(0x0000) - not-present page\r\n[ 15.962850] PGD 8000000103213067 P4D 8000000103213067 PUD 103212067 PMD 0 \r\n[ 15.969724] Oops: 0000 [#1] PREEMPT SMP PTI\r\n[ 15.973909] CPU: 3 PID: 1 Comm: init Not tainted 6.2.0-rc3-next-20230113 #1\r\n[ 15.980869] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017\r\n[ 15.988336] RIP: 0010:do_wp_page+0x236/0xef0\r\n[ 15.992611] Code: 83 ea 01 49 89 d7 48 85 d2 0f 85 00 ff ff ff 49 8b 7c 24 60 e8 0b f2 e9 00 41 8b 44 24 28 4d 8b 74 24 50 4d 8b 2c 24 89 45 88 <49> 8b 46 08 49 8b 5d 10 a8 01 0f 85 78 02 00 00 0f 1f 44 00 00 4c\r\n[ 16.011356] RSP: 0000:ffffb3f640027d18 EFLAGS: 00010286\r\n[ 16.016583] RAX: 0000000000000a55 RBX: 0400000000000080 RCX: 0000000000000000\r\n[ 16.023715] RDX: 0000000000000000 RSI: ffffffff8d3d2bd5 RDI: ffffffff8e271dfa\r\n[ 16.030838] RBP: ffffb3f640027db0 R08: 8000000432ee9225 R09: ffff8ac3431e3100\r\n[ 16.037962] R10: 0000000000000000 R11: 00007fe169f2f598 R12: ffffb3f640027de0\r\n[ 16.045087] R13: ffff8ac3431e2000 R14: 0000000000000000 R15: 0400000000000000\r\n[ 16.052211] FS: 00007fe16973e800(0000) GS:ffff8ac69fd80000(0000) knlGS:0000000000000000\r\n[ 16.060319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033\r\n[ 16.066060] CR2: 0000000000000008 CR3: 00000001008d4002 CR4: 00000000003706e0\r\n[ 16.073183] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000\r\n[ 16.080322] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400\r\n[ 16.087446] Call Trace:\r\n[ 16.089893] <TASK>\r\n[ 16.091991] ? trace_preempt_off+0x2d/0xd0\r\n[ 16.096087] ? __handle_mm_fault+0x7ee/0x12f0\r\n[ 16.100439] __handle_mm_fault+0xabf/0x12f0\r\n[ 16.104617] handle_mm_fault+0xf8/0x320\r\n[ 16.108457] do_user_addr_fault+0x1d9/0x650\r\n[ 16.112642] exc_page_fault+0x6b/0x170\r\n[ 16.116394] asm_exc_page_fault+0x2b/0x30\r\n[ 16.120408] RIP: 0033:0x7fe169dbf31e\r\n[ 16.123986] Code: ba ff ff ff ff 0f 9f c0 0f b6 c0 0f 4c c2 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 41 54 31 c0 ba ff ff ff ff 53 48 83 ec 08 <f0> 0f b1 15 72 02 17 00 83 f8 ff 74 35 41 89 c4 85 c0 75 21 31 c0\r\n[ 16.142724] RSP: 002b:00007ffcd0edec80 EFLAGS: 00010202\r\n[ 16.147948] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000555bd8\r\n[ 16.155074] RDX: 00000000ffffffff RSI: 00007ffcd0edefa8 RDI: 0000000000000001\r\n[ 16.162198] RBP: 00007ffcd0edefa8 R08: 00007fe169bc5a10 R09: 00007fe169f37a10\r\n[ 16.169319] R10: 00007fe169adf3ee R11: 0000000000000246 R12: 00007ffcd0edefa8\r\n[ 16.176445] R13: 000000000041b9a0 R14: 0000000000555bd8 R15: 00007fe169f69000\r\n[ 16.183569] </TASK>\r\n[ 16.185752] Modules linked in:\r\n[ 16.188803] CR2: 0000000000000008\r\n[ 16.192114] ---[ end trace 0000000000000000 ]---'}, {'kind': 'panic', 'message': '[ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009\r\n[ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)\r\n[ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]---'}]}, 'level': '2.3.4.1', 'namespace': 'common', 'result': 'fail'} 2023-01-13T04:31:10 [ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]--- 2023-01-13T04:31:10 end: 2.3.4.1 login-action (duration 00:00:17) [common] 2023-01-13T04:31:10 {'case': 'login-action', 'definition': 'lava', 'duration': '17.39', 'extra': {'fail': '[ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009\r\n[ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)\r\n[ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]---'}, 'level': '2.3.4.1', 'namespace': 'common', 'result': 'fail'} 2023-01-13T04:31:10 auto-login-action failed: 1 of 1 attempts. '[ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]---' 2023-01-13T04:31:10 [ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]--- 2023-01-13T04:31:10 end: 2.3.4 auto-login-action (duration 00:00:18) [common] 2023-01-13T04:31:10 {'case': 'auto-login-action', 'definition': 'lava', 'duration': '18.12', 'extra': {'fail': '[ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009\r\n[ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)\r\n[ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]---'}, 'level': '2.3.4', 'namespace': 'common', 'result': 'fail'} 2023-01-13T04:31:10 bootloader-retry failed: 1 of 1 attempts. '[ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]---' 2023-01-13T04:31:10 [ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]--- 2023-01-13T04:31:10 end: 2.3 bootloader-retry (duration 00:01:37) [common] 2023-01-13T04:31:10 {'case': 'bootloader-retry', 'definition': 'lava', 'duration': '97.03', 'extra': {'fail': '[ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009\r\n[ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)\r\n[ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]---'}, 'level': '2.3', 'namespace': 'common', 'result': 'fail'} 2023-01-13T04:31:10 [ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]--- 2023-01-13T04:31:10 end: 2 bootloader-action (duration 00:01:37) [common] 2023-01-13T04:31:10 {'case': 'bootloader-action', 'definition': 'lava', 'duration': '97.04', 'extra': {'fail': '[ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009\r\n[ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)\r\n[ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]---'}, 'level': '2', 'namespace': 'common', 'result': 'fail'} 2023-01-13T04:31:10 Cleaning after the job 2023-01-13T04:31:10 Cleaning up download directory: /var/lib/lava/dispatcher/tmp/6053089/tftp-deploy-qytnh1b1/kernel 2023-01-13T04:31:10 Cleaning up download directory: /var/lib/lava/dispatcher/tmp/6053089/tftp-deploy-qytnh1b1/nfsrootfs 2023-01-13T04:31:10 Cleaning up download directory: /var/lib/lava/dispatcher/tmp/6053089/tftp-deploy-qytnh1b1/modules 2023-01-13T04:31:10 start: 5.1 power-off (timeout 00:00:30) [common] 2023-01-13T04:31:10 Calling: 'nice' 'ipmitool' '-U' 'ADMIN' '-P' 'ADMIN' '-I' 'lanplus' '-H' '10.66.16.51' 'chassis' 'power' 'off' 2023-01-13T04:31:10 >> Chassis Power Control: Down/Off 2023-01-13T04:31:10 Returned 0 in 0 seconds 2023-01-13T04:31:10 end: 5.1 power-off (duration 00:00:00) [common] 2023-01-13T04:31:10 {'case': 'power-off', 'definition': 'lava', 'duration': '0.14', 'extra': {'status': 'success'}, 'level': '5.1', 'namespace': 'common', 'result': 'pass'} 2023-01-13T04:31:10 start: 5.2 read-feedback (timeout 00:00:30) [common] 2023-01-13T04:31:11 Finalising connection for namespace 'common' 2023-01-13T04:31:11 Disconnecting from telnet: Finalise 2023-01-13T04:31:11 ] 2023-01-13T04:31:11 quit 2023-01-13T04:31:11 quit 2023-01-13T04:31:11 end: 5.2 read-feedback (duration 00:00:01) [common] 2023-01-13T04:31:11 Override tmp directory removed at /var/lib/lava/dispatcher/tmp/6053089 2023-01-13T04:31:12 Root tmp directory removed at /var/lib/lava/dispatcher/tmp/6053089 2023-01-13T04:31:12 JobError: Your job cannot terminate cleanly. 2023-01-13T04:31:12 {'case': 'job', 'definition': 'lava', 'error_msg': '[ 16.295799] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009\r\n[ 16.303496] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)\r\n[ 16.314190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]---', 'error_type': 'Job', 'result': 'fail'}
Hi Matthew,
On Fri, 13 Jan 2023 at 19:32, Matthew Wilcox willy@infradead.org wrote:
On Fri, Jan 13, 2023 at 06:53:01PM +0530, Naresh Kamboju wrote:
Linux next tag 20230113 boot failed on x86_64, arm64, arm and i386.
Why are you still not running these stack dumps through scripts/decode_stacktrace.sh ? That seems like it's much easier for you to do than expecting everybody who might be interested in investigating your reports to pull down enough of the build artifacts to make it work.
Hope this will help you.
# ./scripts/decode_stacktrace.sh vmlinux < input.txt > output.txt
stack dumps: ------------------ [ 15.945626] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 15.952588] #PF: supervisor read access in kernel mode [ 15.957720] #PF: error_code(0x0000) - not-present page [ 15.962850] PGD 8000000103213067 P4D 8000000103213067 PUD 103212067 PMD 0 [ 15.969724] Oops: 0000 [#1] PREEMPT SMP PTI [ 15.973909] CPU: 3 PID: 1 Comm: init Not tainted 6.2.0-rc3-next-20230113 #1 [ 15.980869] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 15.988336] RIP: 0010:do_wp_page (memory.c:?) [ 15.992611] Code: 83 ea 01 49 89 d7 48 85 d2 0f 85 00 ff ff ff 49 8b 7c 24 60 e8 0b f2 e9 00 41 8b 44 24 28 4d 8b 74 24 50 4d 8b 2c 24 89 45 88 <49> 8b 46 08 49 8b 5d 10 a8 01 0f 85 78 02 00 00 0f 1f 44 00 00 4c All code ======== 0: 83 ea 01 sub $0x1,%edx 3: 49 89 d7 mov %rdx,%r15 6: 48 85 d2 test %rdx,%rdx 9: 0f 85 00 ff ff ff jne 0xffffffffffffff0f f: 49 8b 7c 24 60 mov 0x60(%r12),%rdi 14: e8 0b f2 e9 00 callq 0xe9f224 19: 41 8b 44 24 28 mov 0x28(%r12),%eax 1e: 4d 8b 74 24 50 mov 0x50(%r12),%r14 23: 4d 8b 2c 24 mov (%r12),%r13 27: 89 45 88 mov %eax,-0x78(%rbp) 2a:* 49 8b 46 08 mov 0x8(%r14),%rax <-- trapping instruction 2e: 49 8b 5d 10 mov 0x10(%r13),%rbx 32: a8 01 test $0x1,%al 34: 0f 85 78 02 00 00 jne 0x2b2 3a: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) 3f: 4c rex.WR
Code starting with the faulting instruction =========================================== 0: 49 8b 46 08 mov 0x8(%r14),%rax 4: 49 8b 5d 10 mov 0x10(%r13),%rbx 8: a8 01 test $0x1,%al a: 0f 85 78 02 00 00 jne 0x288 10: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) 15: 4c rex.WR [ 16.011356] RSP: 0000:ffffb3f640027d18 EFLAGS: 00010286 [ 16.016583] RAX: 0000000000000a55 RBX: 0400000000000080 RCX: 0000000000000000 [ 16.023715] RDX: 0000000000000000 RSI: ffffffff8d3d2bd5 RDI: ffffffff8e271dfa [ 16.030838] RBP: ffffb3f640027db0 R08: 8000000432ee9225 R09: ffff8ac3431e3100 [ 16.037962] R10: 0000000000000000 R11: 00007fe169f2f598 R12: ffffb3f640027de0 [ 16.045087] R13: ffff8ac3431e2000 R14: 0000000000000000 R15: 0400000000000000 [ 16.052211] FS: 00007fe16973e800(0000) GS:ffff8ac69fd80000(0000) knlGS:0000000000000000 [ 16.060319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.066060] CR2: 0000000000000008 CR3: 00000001008d4002 CR4: 00000000003706e0 [ 16.073183] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.080322] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.087446] Call Trace: [ 16.089893] <TASK> [ 16.091991] ? trace_preempt_off (??:?) [ 16.096087] ? __handle_mm_fault (memory.c:?) [ 16.100439] __handle_mm_fault (memory.c:?) [ 16.104617] handle_mm_fault (??:?) [ 16.108457] do_user_addr_fault (fault.c:?) [ 16.112642] exc_page_fault (??:?) [ 16.116394] asm_exc_page_fault (??:?) [ 16.120408] RIP: 0033:0x7fe169dbf31e [ 16.123986] Code: ba ff ff ff ff 0f 9f c0 0f b6 c0 0f 4c c2 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 41 54 31 c0 ba ff ff ff ff 53 48 83 ec 08 <f0> 0f b1 15 72 02 17 00 83 f8 ff 74 35 41 89 c4 85 c0 75 21 31 c0 All code ======== 0: ba ff ff ff ff mov $0xffffffff,%edx 5: 0f 9f c0 setg %al 8: 0f b6 c0 movzbl %al,%eax b: 0f 4c c2 cmovl %edx,%eax e: c3 retq f: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1) 16: 00 00 00 19: 0f 1f 00 nopl (%rax) 1c: 41 54 push %r12 1e: 31 c0 xor %eax,%eax 20: ba ff ff ff ff mov $0xffffffff,%edx 25: 53 push %rbx 26: 48 83 ec 08 sub $0x8,%rsp 2a:* f0 0f b1 15 72 02 17 lock cmpxchg %edx,0x170272(%rip) # 0x1702a4 <-- trapping instruction 31: 00 32: 83 f8 ff cmp $0xffffffff,%eax 35: 74 35 je 0x6c 37: 41 89 c4 mov %eax,%r12d 3a: 85 c0 test %eax,%eax 3c: 75 21 jne 0x5f 3e: 31 c0 xor %eax,%eax
Code starting with the faulting instruction =========================================== 0: f0 0f b1 15 72 02 17 lock cmpxchg %edx,0x170272(%rip) # 0x17027a 7: 00 8: 83 f8 ff cmp $0xffffffff,%eax b: 74 35 je 0x42 d: 41 89 c4 mov %eax,%r12d 10: 85 c0 test %eax,%eax 12: 75 21 jne 0x35 14: 31 c0 xor %eax,%eax [ 16.142724] RSP: 002b:00007ffcd0edec80 EFLAGS: 00010202 [ 16.147948] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000555bd8 [ 16.155074] RDX: 00000000ffffffff RSI: 00007ffcd0edefa8 RDI: 0000000000000001 [ 16.162198] RBP: 00007ffcd0edefa8 R08: 00007fe169bc5a10 R09: 00007fe169f37a10 [ 16.169319] R10: 00007fe169adf3ee R11: 0000000000000246 R12: 00007ffcd0edefa8 [ 16.176445] R13: 000000000041b9a0 R14: 0000000000555bd8 R15: 00007fe169f69000 [ 16.183569] </TASK> [ 16.185752] Modules linked in: [ 16.188803] CR2: 0000000000000008 [ 16.192114] ---[ end trace 0000000000000000 ]---
ref: https://lore.kernel.org/linux-next/CA+G9fYt_b04YNCCv-iTZTtwb5fmNEQ0abiO46qW_...
- Naresh
On Fri, Jan 13, 2023 at 09:14:15PM +0530, Naresh Kamboju wrote:
Hi Matthew,
On Fri, 13 Jan 2023 at 19:32, Matthew Wilcox willy@infradead.org wrote:
On Fri, Jan 13, 2023 at 06:53:01PM +0530, Naresh Kamboju wrote:
Linux next tag 20230113 boot failed on x86_64, arm64, arm and i386.
Why are you still not running these stack dumps through scripts/decode_stacktrace.sh ? That seems like it's much easier for you to do than expecting everybody who might be interested in investigating your reports to pull down enough of the build artifacts to make it work.
Hope this will help you.
# ./scripts/decode_stacktrace.sh vmlinux < input.txt > output.txt
stack dumps:
[ 15.945626] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 15.952588] #PF: supervisor read access in kernel mode [ 15.957720] #PF: error_code(0x0000) - not-present page [ 15.962850] PGD 8000000103213067 P4D 8000000103213067 PUD 103212067 PMD 0 [ 15.969724] Oops: 0000 [#1] PREEMPT SMP PTI [ 15.973909] CPU: 3 PID: 1 Comm: init Not tainted 6.2.0-rc3-next-20230113 #1 [ 15.980869] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 15.988336] RIP: 0010:do_wp_page (memory.c:?)
Uh, are you compiling your kernels without debuginfo? The results from syzbot & 0day are much more useful:
https://lore.kernel.org/linux-mm/Y8FnAwWOxLrfoWTN@casper.infradead.org/T/#u
for an example.
[ 16.087446] Call Trace: [ 16.089893] <TASK> [ 16.091991] ? trace_preempt_off (??:?) [ 16.096087] ? __handle_mm_fault (memory.c:?) [ 16.100439] __handle_mm_fault (memory.c:?) [ 16.104617] handle_mm_fault (??:?) [ 16.108457] do_user_addr_fault (fault.c:?) [ 16.112642] exc_page_fault (??:?) [ 16.116394] asm_exc_page_fault (??:?) [ 16.120408] RIP: 0033:0x7fe169dbf31e
Call Trace:
<TASK> wp_page_copy mm/memory.c:3047 [inline] do_wp_page+0x749/0x3880 mm/memory.c:3425 handle_pte_fault mm/memory.c:4937 [inline] __handle_mm_fault+0x2183/0x3eb0 mm/memory.c:5061 handle_mm_fault+0x1b6/0x850 mm/memory.c:5207 do_user_addr_fault+0x475/0x1210 arch/x86/mm/fault.c:1407 handle_page_fault arch/x86/mm/fault.c:1498 [inline] exc_page_fault+0x98/0x170 arch/x86/mm/fault.c:1554 asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:570 RIP: 0033:0x7f92c0e2df98
See how much more useful that is?
On Fri, 13 Jan 2023 at 21:23, Matthew Wilcox willy@infradead.org wrote:
On Fri, Jan 13, 2023 at 09:14:15PM +0530, Naresh Kamboju wrote:
Hi Matthew,
On Fri, 13 Jan 2023 at 19:32, Matthew Wilcox willy@infradead.org wrote:
On Fri, Jan 13, 2023 at 06:53:01PM +0530, Naresh Kamboju wrote:
Linux next tag 20230113 boot failed on x86_64, arm64, arm and i386.
Why are you still not running these stack dumps through scripts/decode_stacktrace.sh ? That seems like it's much easier for you to do than expecting everybody who might be interested in investigating your reports to pull down enough of the build artifacts to make it work.
Hope this will help you.
# ./scripts/decode_stacktrace.sh vmlinux < input.txt > output.txt
stack dumps:
[ 15.945626] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 15.952588] #PF: supervisor read access in kernel mode [ 15.957720] #PF: error_code(0x0000) - not-present page [ 15.962850] PGD 8000000103213067 P4D 8000000103213067 PUD 103212067 PMD 0 [ 15.969724] Oops: 0000 [#1] PREEMPT SMP PTI [ 15.973909] CPU: 3 PID: 1 Comm: init Not tainted 6.2.0-rc3-next-20230113 #1 [ 15.980869] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 15.988336] RIP: 0010:do_wp_page (memory.c:?)
Uh, are you compiling your kernels without debuginfo?
We have a large set of build combinations with and without debug info.
The results from syzbot & 0day are much more useful:
https://lore.kernel.org/linux-mm/Y8FnAwWOxLrfoWTN@casper.infradead.org/T/#u
for an example.
[ 16.087446] Call Trace: [ 16.089893] <TASK> [ 16.091991] ? trace_preempt_off (??:?) [ 16.096087] ? __handle_mm_fault (memory.c:?) [ 16.100439] __handle_mm_fault (memory.c:?) [ 16.104617] handle_mm_fault (??:?) [ 16.108457] do_user_addr_fault (fault.c:?) [ 16.112642] exc_page_fault (??:?) [ 16.116394] asm_exc_page_fault (??:?) [ 16.120408] RIP: 0033:0x7fe169dbf31e
Call Trace:
<TASK> wp_page_copy mm/memory.c:3047 [inline] do_wp_page+0x749/0x3880 mm/memory.c:3425 handle_pte_fault mm/memory.c:4937 [inline] __handle_mm_fault+0x2183/0x3eb0 mm/memory.c:5061 handle_mm_fault+0x1b6/0x850 mm/memory.c:5207 do_user_addr_fault+0x475/0x1210 arch/x86/mm/fault.c:1407 handle_page_fault arch/x86/mm/fault.c:1498 [inline] exc_page_fault+0x98/0x170 arch/x86/mm/fault.c:1554 asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:570 RIP: 0033:0x7f92c0e2df98
See how much more useful that is?
From next time I will send regression email reports with decode_stacktrace.sh
For example: Here is the decode stack trace from arm64 with filename and line number,
[ 0.288009] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 0.288618] Mem abort info: [ 0.288812] ESR = 0x0000000096000006 [ 0.289069] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.289427] SET = 0, FnV = 0 [ 0.289634] EA = 0, S1PTW = 0 [ 0.289851] FSC = 0x06: level 2 translation fault [ 0.290181] Data abort info: [ 0.290382] ISV = 0, ISS = 0x00000006 [ 0.290640] CM = 0, WnR = 0 [ 0.290846] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000100931000 [ 0.291273] [0000000000000008] pgd=0800000101910003, p4d=0800000101910003, pud=0800000101911003, pmd=0000000000000000 [ 0.292007] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP [ 0.292428] Modules linked in: [ 0.292639] CPU: 1 PID: 1 Comm: init Not tainted 6.2.0-rc3-next-20230113 #1 [ 0.293100] Hardware name: linux,dummy-virt (DT) [ 0.293409] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.293874] pc : _compound_head (include/linux/page-flags.h:251) [ 0.294186] lr : do_wp_page (include/linux/rmap.h:156 mm/memory.c:3057 mm/memory.c:3425) [ 0.294443] sp : ffff80000803bbf0 [ 0.294669] x29: ffff80000803bbf0 x28: ffff0000c02d0000 x27: 0000000000000a55 [ 0.295140] x26: ffff0000c0980000 x25: ffff0000c0980000 x24: 0000000000000000 [ 0.295621] x23: 0000000000000a55 x22: ffff0000c0932c60 x21: ffff0000c0932c60 [ 0.296122] x20: 0000000000000000 x19: ffff80000803bd18 x18: 0000000000000000 [ 0.296620] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000c1938400 [ 0.297121] x14: ffff0000c0980000 x13: ffffdec19c918600 x12: 0000ffff86e83fff [ 0.297621] x11: 0000ffff86c86000 x10: 1fffe00018327081 x9 : ffffdec19c3ec4e8 [ 0.298124] x8 : ffff80000803bb38 x7 : 0000000000000000 x6 : 0000000000000001 [ 0.298624] x5 : ffffdec19dbbf000 x4 : ffffdec19dbbf2e8 x3 : 0000000000000000 [ 0.299125] x2 : ffff0000c02d0000 x1 : ffff0000c02d0000 x0 : 0000000000000000 [ 0.299627] Call trace: [ 0.299804] _compound_head (include/linux/page-flags.h:251) [ 0.300059] __handle_mm_fault (mm/memory.c:4937 mm/memory.c:5061) [ 0.300359] handle_mm_fault (mm/memory.c:5207) [ 0.300640] do_page_fault (arch/arm64/mm/fault.c:512 arch/arm64/mm/fault.c:612) [ 0.300909] do_mem_abort (arch/arm64/mm/fault.c:831) [ 0.301161] el0_da (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:516) [ 0.301379] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:659) [ 0.301684] el0t_64_sync (arch/arm64/kernel/entry.S:584) [ 0.301952] Code: d65f03c0 d4210000 d503201f d503201f (f9400401) All code ======== 0:* c0 03 5f rolb $0x5f,(%rbx) <-- trapping instruction 3: d6 (bad) 4: 00 00 add %al,(%rax) 6: 21 d4 and %edx,%esp 8: 1f (bad) 9: 20 03 and %al,(%rbx) b: d5 (bad) c: 1f (bad) d: 20 03 and %al,(%rbx) f: d5 (bad) 10: 01 04 40 add %eax,(%rax,%rax,2) 13: f9 stc
Code starting with the faulting instruction =========================================== 0: 01 04 40 add %eax,(%rax,%rax,2) 3: f9 stc [ 0.302379] ---[ end trace 0000000000000000 ]--- [ 0.302718] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Thank you.
Best regards Naresh Kamboju
On Fri, Jan 13, 2023 at 03:53:44PM +0000, Matthew Wilcox wrote:
On Fri, Jan 13, 2023 at 09:14:15PM +0530, Naresh Kamboju wrote:
[ 15.980869] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 15.988336] RIP: 0010:do_wp_page (memory.c:?)
Uh, are you compiling your kernels without debuginfo? The results from syzbot & 0day are much more useful:
https://lore.kernel.org/linux-mm/Y8FnAwWOxLrfoWTN@casper.infradead.org/T/#u
for an example.
This will be a consequence of x86 not including DEBUG_INFO in defconfig - a lot of the testing systems cover unmodified upstream configs as a baseline, it tends to make life easier and be an indication of what people want covering. A quick survey says most architectures are setting at least DEBUG_INFO_REDUCED, it'd probably be a good idea for x86 to do so as well. The logs from arm64 and probably also arm (depending on exactly which config was being covered) should be more usefully decodable, Naresh you mentioned that those were also failing?
On Fri, Jan 13, 2023 at 03:53:44PM +0000, Matthew Wilcox wrote:
Uh, are you compiling your kernels without debuginfo? The results from syzbot & 0day are much more useful:
FWIW here's a decode from arm64 (the boards I sampled all looked very similar):
<1>Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 <1>Mem abort info: <1> ESR = 0x0000000096000005 <1> EC = 0x25: DABT (current EL), IL = 32 bits <1> SET = 0, FnV = 0 <1> EA = 0, S1PTW = 0 <1> FSC = 0x05: level 1 translation fault <1>Data abort info: <1> ISV = 0, ISS = 0x00000005 <1> CM = 0, WnR = 0 <1>user pgtable: 4k pages, 39-bit VAs, pgdp=00000000422b3000 <1>[0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 <0>Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP <4>Modules linked in: <4>CPU: 3 PID: 58 Comm: modprobe Not tainted 6.2.0-rc3-next-20230113 #2 <4>Hardware name: Libre Computer Board ALL-H3-CC H5 (DT) <4>pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) <4>pc : do_wp_page (include/linux/page-flags.h:251 mm/memory.c:3047 mm/memory.c:3425) <4>lr : do_wp_page (mm/memory.c:3046 mm/memory.c:3425) <4>sp : ffffffc00972bc50 <4>x29: ffffffc00972bc50 x28: ffffff80022e8000 x27: ffffff8002f9c060 <4>x26: 0000000000000002 x25: ffffff80022b4990 x24: 0000000000000000 <4>x23: ffffff8002f9c000 x22: 0000000000000000 x21: 0000000000000000 <4>x20: 0000000000000a55 x19: ffffffc00972bd38 x18: 0000000000000000 <4>x17: 0000000000000000 x16: 0000000000000000 x15: ffffff80022bfa00 <4>x14: ffffff8002f9c000 x13: ffffffc008b3bc88 x12: 0000007f9b02bfff <4>x11: 0000007f9ad49fc0 x10: ffffff80022bfa0c x9 : ffffff80022bfa00 <4>x8 : ffffff80022bfa50 x7 : ffffff8002f9c000 x6 : 0000000000000000 <4>x5 : 0000000000041362 x4 : 0000007f9ad49000 x3 : ffffff80022b4990 <4>x2 : 0000000000100073 x1 : ffffff80022e8000 x0 : 0000000000000a55 <4>Call trace: <4> do_wp_page (include/linux/page-flags.h:251 mm/memory.c:3047 mm/memory.c:3425) <4> __handle_mm_fault (mm/memory.c:4937 mm/memory.c:5061) <4> handle_mm_fault (mm/memory.c:5207) <4> do_page_fault (arch/arm64/mm/fault.c:512 arch/arm64/mm/fault.c:612) <4> do_mem_abort (arch/arm64/mm/fault.c:831) <4> el0_da (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:516) <4> el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:659) <4> el0t_64_sync (arch/arm64/kernel/entry.S:584) <0>Code: aa1503f8 b9402a60 aa1503f6 b90063e0 (f94006a0) All code ======== 0: aa1503f8 .word 0xaa1503f8 4: b9402a60 .word 0xb9402a60 8: aa1503f6 .word 0xaa1503f6 c: b90063e0 .word 0xb90063e0 10:* f94006a0 .word 0xf94006a0 <-- trapping instruction
Code starting with the faulting instruction =========================================== 0: f94006a0 .word 0xf94006a0 <4>---[ end trace 0000000000000000 ]---
The disassembly is disappointing, I didn't peer at why that is.
On Fri, Jan 13, 2023 at 07:43:58PM +0000, Mark Brown wrote:
On Fri, Jan 13, 2023 at 03:53:44PM +0000, Matthew Wilcox wrote:
Uh, are you compiling your kernels without debuginfo? The results from syzbot & 0day are much more useful:
FWIW here's a decode from arm64 (the boards I sampled all looked very similar):
We've identified the bad commit now ... this thread is just about improving the process for next time ;-)
<1>Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 <1>Mem abort info: <1> ESR = 0x0000000096000005 <1> EC = 0x25: DABT (current EL), IL = 32 bits <1> SET = 0, FnV = 0 <1> EA = 0, S1PTW = 0 <1> FSC = 0x05: level 1 translation fault <1>Data abort info: <1> ISV = 0, ISS = 0x00000005 <1> CM = 0, WnR = 0 <1>user pgtable: 4k pages, 39-bit VAs, pgdp=00000000422b3000 <1>[0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 <0>Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP <4>Modules linked in: <4>CPU: 3 PID: 58 Comm: modprobe Not tainted 6.2.0-rc3-next-20230113 #2 <4>Hardware name: Libre Computer Board ALL-H3-CC H5 (DT) <4>pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) <4>pc : do_wp_page (include/linux/page-flags.h:251 mm/memory.c:3047 mm/memory.c:3425) <4>lr : do_wp_page (mm/memory.c:3046 mm/memory.c:3425) <4>sp : ffffffc00972bc50 <4>x29: ffffffc00972bc50 x28: ffffff80022e8000 x27: ffffff8002f9c060 <4>x26: 0000000000000002 x25: ffffff80022b4990 x24: 0000000000000000 <4>x23: ffffff8002f9c000 x22: 0000000000000000 x21: 0000000000000000 <4>x20: 0000000000000a55 x19: ffffffc00972bd38 x18: 0000000000000000 <4>x17: 0000000000000000 x16: 0000000000000000 x15: ffffff80022bfa00 <4>x14: ffffff8002f9c000 x13: ffffffc008b3bc88 x12: 0000007f9b02bfff <4>x11: 0000007f9ad49fc0 x10: ffffff80022bfa0c x9 : ffffff80022bfa00 <4>x8 : ffffff80022bfa50 x7 : ffffff8002f9c000 x6 : 0000000000000000 <4>x5 : 0000000000041362 x4 : 0000007f9ad49000 x3 : ffffff80022b4990 <4>x2 : 0000000000100073 x1 : ffffff80022e8000 x0 : 0000000000000a55 <4>Call trace: <4> do_wp_page (include/linux/page-flags.h:251 mm/memory.c:3047 mm/memory.c:3425) <4> __handle_mm_fault (mm/memory.c:4937 mm/memory.c:5061) <4> handle_mm_fault (mm/memory.c:5207) <4> do_page_fault (arch/arm64/mm/fault.c:512 arch/arm64/mm/fault.c:612) <4> do_mem_abort (arch/arm64/mm/fault.c:831) <4> el0_da (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:516) <4> el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:659) <4> el0t_64_sync (arch/arm64/kernel/entry.S:584) <0>Code: aa1503f8 b9402a60 aa1503f6 b90063e0 (f94006a0) All code ======== 0: aa1503f8 .word 0xaa1503f8 4: b9402a60 .word 0xb9402a60 8: aa1503f6 .word 0xaa1503f6 c: b90063e0 .word 0xb90063e0 10:* f94006a0 .word 0xf94006a0 <-- trapping instruction
Code starting with the faulting instruction
0: f94006a0 .word 0xf94006a0 <4>---[ end trace 0000000000000000 ]---
The disassembly is disappointing, I didn't peer at why that is.
On Fri, Jan 13, 2023 at 07:54:20PM +0000, Matthew Wilcox wrote:
On Fri, Jan 13, 2023 at 07:43:58PM +0000, Mark Brown wrote:
On Fri, Jan 13, 2023 at 03:53:44PM +0000, Matthew Wilcox wrote:
Uh, are you compiling your kernels without debuginfo? The results from syzbot & 0day are much more useful:
FWIW here's a decode from arm64 (the boards I sampled all looked very similar):
We've identified the bad commit now ... this thread is just about improving the process for next time ;-)
Ah, OK - I missed that thread.
-
Mark Brown -
Matthew Wilcox -
Naresh Kamboju