This is the start of the stable review cycle for the 5.2.6 release. There are 20 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.2.6-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.2.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.2.6-rc1
Yan, Zheng zyan@redhat.com ceph: hold i_ceph_lock when removing caps for freeing inode
Yoshinori Sato ysato@users.sourceforge.jp Fix allyesconfig output.
Miroslav Lichvar mlichvar@redhat.com drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
Linus Torvalds torvalds@linux-foundation.org /proc/<pid>/cmdline: add back the setproctitle() special case
Linus Torvalds torvalds@linux-foundation.org /proc/<pid>/cmdline: remove all the special cases
Jann Horn jannh@google.com sched/fair: Use RCU accessors consistently for ->numa_group
Jann Horn jannh@google.com sched/fair: Don't free p->numa_faults with concurrent readers
Vladis Dronov vdronov@redhat.com Bluetooth: hci_uart: check for missing tty operations
Marta Rybczynska mrybczyn@kalray.eu nvme: fix multipath crash when ANA is deactivated
Florian Westphal fw@strlen.de xfrm: policy: fix bydst hlist corruption on hash rebuild
Luke Nowakowski-Krijger lnowakow@eng.ucsd.edu media: radio-raremono: change devm_k*alloc to k*alloc
Benjamin Coddington bcodding@redhat.com NFS: Cleanup if nfs_match_client is interrupted
Andrey Konovalov andreyknvl@google.com media: pvrusb2: use a different format for warnings
Oliver Neukum oneukum@suse.com media: cpia2_usb: first wake up, then free in disconnect
Fabio Estevam festevam@gmail.com ath10k: Change the warning message string
Sean Young sean@mess.org media: au0828: fix null dereference in error path
Stanislav Fomichev sdf@google.com bpf: fix NULL deref in btf_type_is_resolve_source_only
Takashi Iwai tiwai@suse.de ALSA: usb-audio: Sanity checks for each pipe and EP types
Phong Tran tranmanphong@gmail.com ISDN: hfcsusb: checking idx of ep configuration
Sunil Muthuswamy sunilmut@microsoft.com vsock: correct removal of socket from the list
-------------
Diffstat:
Makefile | 4 +- arch/sh/boards/Kconfig | 14 +-- drivers/bluetooth/hci_ath.c | 3 + drivers/bluetooth/hci_bcm.c | 3 + drivers/bluetooth/hci_intel.c | 3 + drivers/bluetooth/hci_ldisc.c | 13 +++ drivers/bluetooth/hci_mrvl.c | 3 + drivers/bluetooth/hci_qca.c | 3 + drivers/bluetooth/hci_uart.h | 1 + drivers/isdn/hardware/mISDN/hfcsusb.c | 3 + drivers/media/radio/radio-raremono.c | 30 ++++-- drivers/media/usb/au0828/au0828-core.c | 12 +-- drivers/media/usb/cpia2/cpia2_usb.c | 3 +- drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 4 +- drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c | 6 +- drivers/media/usb/pvrusb2/pvrusb2-std.c | 2 +- drivers/net/wireless/ath/ath10k/usb.c | 2 +- drivers/nvme/host/multipath.c | 8 +- drivers/nvme/host/nvme.h | 6 +- drivers/pps/pps.c | 8 ++ fs/ceph/caps.c | 10 +- fs/ceph/inode.c | 2 +- fs/ceph/super.h | 2 +- fs/exec.c | 2 +- fs/nfs/client.c | 4 +- fs/proc/base.c | 132 +++++++++++++----------- include/linux/sched.h | 10 +- include/linux/sched/numa_balancing.h | 4 +- kernel/bpf/btf.c | 12 +-- kernel/fork.c | 2 +- kernel/sched/fair.c | 144 +++++++++++++++++++-------- net/vmw_vsock/af_vsock.c | 38 ++----- net/xfrm/xfrm_policy.c | 12 ++- sound/usb/helper.c | 17 ++++ sound/usb/helper.h | 1 + sound/usb/quirks.c | 18 +++- tools/testing/selftests/net/xfrm_policy.sh | 27 ++++- 37 files changed, 368 insertions(+), 200 deletions(-)
From: Thierry Reding treding@nvidia.com
On Fri, 02 Aug 2019 11:39:54 +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.2.6 release. There are 20 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.2.6-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.2.y and the diffstat can be found below.
thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v5.2: 12 builds: 12 pass, 0 fail 22 boots: 22 pass, 0 fail 38 tests: 38 pass, 0 fail
Linux version: 5.2.6-rc1-gbe893953fcc2 Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra20-ventana, tegra210-p2371-2180, tegra30-cardhu-a04
Thierry
On Fri, Aug 02, 2019 at 07:21:05PM +0200, Thierry Reding wrote:
From: Thierry Reding treding@nvidia.com
On Fri, 02 Aug 2019 11:39:54 +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.2.6 release. There are 20 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.2.6-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.2.y and the diffstat can be found below.
thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v5.2: 12 builds: 12 pass, 0 fail 22 boots: 22 pass, 0 fail 38 tests: 38 pass, 0 fail
Linux version: 5.2.6-rc1-gbe893953fcc2 Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra20-ventana, tegra210-p2371-2180, tegra30-cardhu-a04
Great! Thanks for testing all of these and letting me know.
greg k-h
On Sat, Aug 03, 2019 at 09:09:32AM +0200, Greg Kroah-Hartman wrote:
On Fri, Aug 02, 2019 at 07:21:05PM +0200, Thierry Reding wrote:
From: Thierry Reding treding@nvidia.com
On Fri, 02 Aug 2019 11:39:54 +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.2.6 release. There are 20 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.2.6-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.2.y and the diffstat can be found below.
thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v5.2: 12 builds: 12 pass, 0 fail 22 boots: 22 pass, 0 fail 38 tests: 38 pass, 0 fail
Linux version: 5.2.6-rc1-gbe893953fcc2 Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra20-ventana, tegra210-p2371-2180, tegra30-cardhu-a04
Great! Thanks for testing all of these and letting me know.
Hi Greg,
I stumbled across something as I was attempting to automate more parts of our process to generate these reports. The original test results were from a different version of the tree: 5.2.6-rc1-gdbc7f5c7df28. I suspect that's the same thing that you were discussing with Pavel regarding the IP tunnel patch that was added subsequent to the announcement.
Just for my understanding, does this mean that the patch still makes it into the 5.2.6 release, or was it supposed to go into 5.2.7?
One problem that I ran into was that when I tried to correlate the test results with your announcement email, there's no indication other than the branch name and the release candidate name (5.2.6-rc1 in this case), so there's no way to uniquely identify which test run belongs to the announcement. Given that there are no tags for the release candidates means that that's also not an option to uniquely associate with the builds and tests.
While the differences between the two builds are very minor here, I wonder if there could perhaps in the future be a problem where I report successful results for a test, but the same tests would be broken by a patch added to the stable-rc branch subsequent to the announcement. The test report would be misleading in that case.
I noticed that you do add a couple of X-KernelTest-* headers to your announcement emails, so I'm wondering if perhaps it was possible for you to add another one that contains the exact SHA1 that corresponds to the snapshot that's the release candidate. That would allow everyone to uniquely associate test results with a specific release candidate.
That said, perhaps I've just got this all wrong and there's already a way to connect all the dots that I'm not aware of. Or maybe I'm being too pedantic here?
Thierry
On Mon, Aug 05, 2019 at 01:48:21PM +0200, Thierry Reding wrote:
Hi Greg,
Sorry for the delay, this got pushed down my queue...
I stumbled across something as I was attempting to automate more parts of our process to generate these reports. The original test results were from a different version of the tree: 5.2.6-rc1-gdbc7f5c7df28. I suspect that's the same thing that you were discussing with Pavel regarding the IP tunnel patch that was added subsequent to the announcement.
Just for my understanding, does this mean that the patch still makes it into the 5.2.6 release, or was it supposed to go into 5.2.7?
One problem that I ran into was that when I tried to correlate the test results with your announcement email, there's no indication other than the branch name and the release candidate name (5.2.6-rc1 in this case), so there's no way to uniquely identify which test run belongs to the announcement. Given that there are no tags for the release candidates means that that's also not an option to uniquely associate with the builds and tests.
While the differences between the two builds are very minor here, I wonder if there could perhaps in the future be a problem where I report successful results for a test, but the same tests would be broken by a patch added to the stable-rc branch subsequent to the announcement. The test report would be misleading in that case.
I noticed that you do add a couple of X-KernelTest-* headers to your announcement emails, so I'm wondering if perhaps it was possible for you to add another one that contains the exact SHA1 that corresponds to the snapshot that's the release candidate. That would allow everyone to uniquely associate test results with a specific release candidate.
That said, perhaps I've just got this all wrong and there's already a way to connect all the dots that I'm not aware of. Or maybe I'm being too pedantic here?
You aren't being pedantic, I think you are missing exactly what the linux-stable-rc tree is for and how it is created.
Granted, it's not really documented anywhere so it's not your fault :)
The linux-stable-rc tree is there ONLY for people who want to test the -rc kernels and can not, or do not want to, use the quilt tree of patches in the stable-queue.git tree on kernel.org. I generate the branches there from a script that throws away the current -rc branch and rebuilds it "from scratch" by applying the patches that are in the stable-quilt tree and then adds the -rc patch as well. This tree is generated multiple times when I am working on the queues and then when I want to do a "real" -rc release.
The branches are constantly rebased, so you can not rely on 'git pull' doing the right thing (unless you add --rebase to it), and are there for testing only.
Yes, you will see different results of a "-rc1" release in the tree depending on the time of day/week when I created the tree, and sometimes I generate them multiple times a day just to have some of the auto-builders give me results quickly (Linaro does pull from it and sends me results within the hour usually).
So does that help? Ideally everyone would just use the quilt trees from stable-queue.git, but no everyone likes that, so the -rc git tree is there to make automated testing "easier". If that works with your workflow, wonderful, feel free to use it. If not, then go with the stable-quilt.git tree, or the tarballs on kernel.org.
And as for the SHA1 being in the emails, that doesn't make all that much sense as that SHA1 doesn't live very long. When I create the trees locally, I instantly delete them after pushing them to kernel.org so I can't regenerate them or do anything with them.
DOes that help explain things better?
thanks,
greg k-h
On Fri, Aug 09, 2019 at 10:52:53AM +0200, Greg Kroah-Hartman wrote:
On Mon, Aug 05, 2019 at 01:48:21PM +0200, Thierry Reding wrote:
Hi Greg,
Sorry for the delay, this got pushed down my queue...
I stumbled across something as I was attempting to automate more parts of our process to generate these reports. The original test results were from a different version of the tree: 5.2.6-rc1-gdbc7f5c7df28. I suspect that's the same thing that you were discussing with Pavel regarding the IP tunnel patch that was added subsequent to the announcement.
Just for my understanding, does this mean that the patch still makes it into the 5.2.6 release, or was it supposed to go into 5.2.7?
One problem that I ran into was that when I tried to correlate the test results with your announcement email, there's no indication other than the branch name and the release candidate name (5.2.6-rc1 in this case), so there's no way to uniquely identify which test run belongs to the announcement. Given that there are no tags for the release candidates means that that's also not an option to uniquely associate with the builds and tests.
While the differences between the two builds are very minor here, I wonder if there could perhaps in the future be a problem where I report successful results for a test, but the same tests would be broken by a patch added to the stable-rc branch subsequent to the announcement. The test report would be misleading in that case.
I noticed that you do add a couple of X-KernelTest-* headers to your announcement emails, so I'm wondering if perhaps it was possible for you to add another one that contains the exact SHA1 that corresponds to the snapshot that's the release candidate. That would allow everyone to uniquely associate test results with a specific release candidate.
That said, perhaps I've just got this all wrong and there's already a way to connect all the dots that I'm not aware of. Or maybe I'm being too pedantic here?
You aren't being pedantic, I think you are missing exactly what the linux-stable-rc tree is for and how it is created.
Granted, it's not really documented anywhere so it's not your fault :)
The linux-stable-rc tree is there ONLY for people who want to test the -rc kernels and can not, or do not want to, use the quilt tree of patches in the stable-queue.git tree on kernel.org. I generate the branches there from a script that throws away the current -rc branch and rebuilds it "from scratch" by applying the patches that are in the stable-quilt tree and then adds the -rc patch as well. This tree is generated multiple times when I am working on the queues and then when I want to do a "real" -rc release.
The branches are constantly rebased, so you can not rely on 'git pull' doing the right thing (unless you add --rebase to it), and are there for testing only.
Yes, you will see different results of a "-rc1" release in the tree depending on the time of day/week when I created the tree, and sometimes I generate them multiple times a day just to have some of the auto-builders give me results quickly (Linaro does pull from it and sends me results within the hour usually).
So does that help? Ideally everyone would just use the quilt trees from stable-queue.git, but no everyone likes that, so the -rc git tree is there to make automated testing "easier". If that works with your workflow, wonderful, feel free to use it. If not, then go with the stable-quilt.git tree, or the tarballs on kernel.org.
I'll have to look into that, to see if that'd work. I have to admit that having a git tree to point scripts at is rather convenient for automation.
And as for the SHA1 being in the emails, that doesn't make all that much sense as that SHA1 doesn't live very long. When I create the trees locally, I instantly delete them after pushing them to kernel.org so I can't regenerate them or do anything with them.
Fair enough. I suppose the worst thing that could happen is that we may fail to test a couple of commits occasionally. In the rare case where this actually matters we'll likely end up reporting the failure for the stable release, in which case it can be fixed in the next one.
DOes that help explain things better?
Yes, makes a lot more sense now. Thanks for taking the time to explain it. Do you want me to snapshot this and submit it as documentation somewhere for later reference?
Thierry
On Fri, Aug 09, 2019 at 03:04:49PM +0200, Thierry Reding wrote:
On Fri, Aug 09, 2019 at 10:52:53AM +0200, Greg Kroah-Hartman wrote:
On Mon, Aug 05, 2019 at 01:48:21PM +0200, Thierry Reding wrote:
Hi Greg,
Sorry for the delay, this got pushed down my queue...
I stumbled across something as I was attempting to automate more parts of our process to generate these reports. The original test results were from a different version of the tree: 5.2.6-rc1-gdbc7f5c7df28. I suspect that's the same thing that you were discussing with Pavel regarding the IP tunnel patch that was added subsequent to the announcement.
Just for my understanding, does this mean that the patch still makes it into the 5.2.6 release, or was it supposed to go into 5.2.7?
One problem that I ran into was that when I tried to correlate the test results with your announcement email, there's no indication other than the branch name and the release candidate name (5.2.6-rc1 in this case), so there's no way to uniquely identify which test run belongs to the announcement. Given that there are no tags for the release candidates means that that's also not an option to uniquely associate with the builds and tests.
While the differences between the two builds are very minor here, I wonder if there could perhaps in the future be a problem where I report successful results for a test, but the same tests would be broken by a patch added to the stable-rc branch subsequent to the announcement. The test report would be misleading in that case.
I noticed that you do add a couple of X-KernelTest-* headers to your announcement emails, so I'm wondering if perhaps it was possible for you to add another one that contains the exact SHA1 that corresponds to the snapshot that's the release candidate. That would allow everyone to uniquely associate test results with a specific release candidate.
That said, perhaps I've just got this all wrong and there's already a way to connect all the dots that I'm not aware of. Or maybe I'm being too pedantic here?
You aren't being pedantic, I think you are missing exactly what the linux-stable-rc tree is for and how it is created.
Granted, it's not really documented anywhere so it's not your fault :)
The linux-stable-rc tree is there ONLY for people who want to test the -rc kernels and can not, or do not want to, use the quilt tree of patches in the stable-queue.git tree on kernel.org. I generate the branches there from a script that throws away the current -rc branch and rebuilds it "from scratch" by applying the patches that are in the stable-quilt tree and then adds the -rc patch as well. This tree is generated multiple times when I am working on the queues and then when I want to do a "real" -rc release.
The branches are constantly rebased, so you can not rely on 'git pull' doing the right thing (unless you add --rebase to it), and are there for testing only.
Yes, you will see different results of a "-rc1" release in the tree depending on the time of day/week when I created the tree, and sometimes I generate them multiple times a day just to have some of the auto-builders give me results quickly (Linaro does pull from it and sends me results within the hour usually).
So does that help? Ideally everyone would just use the quilt trees from stable-queue.git, but no everyone likes that, so the -rc git tree is there to make automated testing "easier". If that works with your workflow, wonderful, feel free to use it. If not, then go with the stable-quilt.git tree, or the tarballs on kernel.org.
I'll have to look into that, to see if that'd work. I have to admit that having a git tree to point scripts at is rather convenient for automation.
And as for the SHA1 being in the emails, that doesn't make all that much sense as that SHA1 doesn't live very long. When I create the trees locally, I instantly delete them after pushing them to kernel.org so I can't regenerate them or do anything with them.
Fair enough. I suppose the worst thing that could happen is that we may fail to test a couple of commits occasionally. In the rare case where this actually matters we'll likely end up reporting the failure for the stable release, in which case it can be fixed in the next one.
DOes that help explain things better?
Yes, makes a lot more sense now. Thanks for taking the time to explain it. Do you want me to snapshot this and submit it as documentation somewhere for later reference?
It probably should go somewhere, but as the number of people that do "test stable kernels in an automated way" is very low, so far I've been doing ok with a one-by-one explaination. I guess if it's more obvious, more people would test, so sure, this should be cleaned up...
thanks,
greg k-h
On Fri, Aug 09, 2019 at 05:49:59PM +0200, Greg Kroah-Hartman wrote:
On Fri, Aug 09, 2019 at 03:04:49PM +0200, Thierry Reding wrote:
On Fri, Aug 09, 2019 at 10:52:53AM +0200, Greg Kroah-Hartman wrote:
On Mon, Aug 05, 2019 at 01:48:21PM +0200, Thierry Reding wrote:
Hi Greg,
Sorry for the delay, this got pushed down my queue...
I stumbled across something as I was attempting to automate more parts of our process to generate these reports. The original test results were from a different version of the tree: 5.2.6-rc1-gdbc7f5c7df28. I suspect that's the same thing that you were discussing with Pavel regarding the IP tunnel patch that was added subsequent to the announcement.
Just for my understanding, does this mean that the patch still makes it into the 5.2.6 release, or was it supposed to go into 5.2.7?
One problem that I ran into was that when I tried to correlate the test results with your announcement email, there's no indication other than the branch name and the release candidate name (5.2.6-rc1 in this case), so there's no way to uniquely identify which test run belongs to the announcement. Given that there are no tags for the release candidates means that that's also not an option to uniquely associate with the builds and tests.
While the differences between the two builds are very minor here, I wonder if there could perhaps in the future be a problem where I report successful results for a test, but the same tests would be broken by a patch added to the stable-rc branch subsequent to the announcement. The test report would be misleading in that case.
I noticed that you do add a couple of X-KernelTest-* headers to your announcement emails, so I'm wondering if perhaps it was possible for you to add another one that contains the exact SHA1 that corresponds to the snapshot that's the release candidate. That would allow everyone to uniquely associate test results with a specific release candidate.
That said, perhaps I've just got this all wrong and there's already a way to connect all the dots that I'm not aware of. Or maybe I'm being too pedantic here?
You aren't being pedantic, I think you are missing exactly what the linux-stable-rc tree is for and how it is created.
Granted, it's not really documented anywhere so it's not your fault :)
The linux-stable-rc tree is there ONLY for people who want to test the -rc kernels and can not, or do not want to, use the quilt tree of patches in the stable-queue.git tree on kernel.org. I generate the branches there from a script that throws away the current -rc branch and rebuilds it "from scratch" by applying the patches that are in the stable-quilt tree and then adds the -rc patch as well. This tree is generated multiple times when I am working on the queues and then when I want to do a "real" -rc release.
The branches are constantly rebased, so you can not rely on 'git pull' doing the right thing (unless you add --rebase to it), and are there for testing only.
Yes, you will see different results of a "-rc1" release in the tree depending on the time of day/week when I created the tree, and sometimes I generate them multiple times a day just to have some of the auto-builders give me results quickly (Linaro does pull from it and sends me results within the hour usually).
So does that help? Ideally everyone would just use the quilt trees from stable-queue.git, but no everyone likes that, so the -rc git tree is there to make automated testing "easier". If that works with your workflow, wonderful, feel free to use it. If not, then go with the stable-quilt.git tree, or the tarballs on kernel.org.
I'll have to look into that, to see if that'd work. I have to admit that having a git tree to point scripts at is rather convenient for automation.
And as for the SHA1 being in the emails, that doesn't make all that much sense as that SHA1 doesn't live very long. When I create the trees locally, I instantly delete them after pushing them to kernel.org so I can't regenerate them or do anything with them.
Fair enough. I suppose the worst thing that could happen is that we may fail to test a couple of commits occasionally. In the rare case where this actually matters we'll likely end up reporting the failure for the stable release, in which case it can be fixed in the next one.
DOes that help explain things better?
Yes, makes a lot more sense now. Thanks for taking the time to explain it. Do you want me to snapshot this and submit it as documentation somewhere for later reference?
It probably should go somewhere, but as the number of people that do "test stable kernels in an automated way" is very low, so far I've been doing ok with a one-by-one explaination. I guess if it's more obvious, more people would test, so sure, this should be cleaned up...
How about something like the below. It applies to the stable-queue.git repository.
Thierry
--- >8 --- From 4083add6ccb4a1c23edeba650170470bcc5d5205 Mon Sep 17 00:00:00 2001 From: Thierry Reding treding@nvidia.com Date: Mon, 12 Aug 2019 10:58:35 +0200 Subject: [PATCH] Describe the stable-queue release process
Add a README file that describes how release candidates for stable kernels are created and how users are expected to use them. This is reworded from Greg's reply here:
https://lore.kernel.org/stable/20190809085253.GA25046@kroah.com/ --- README | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 README
diff --git a/README b/README new file mode 100644 index 000000000000..868469a73f68 --- /dev/null +++ b/README @@ -0,0 +1,31 @@ +This repository is the canonical source for patches that make up the stable +kernel releases. It consists of a set of directories for each of the stable +kernels, as well as a directory that contains a snapshot of the patches for +each stable release. + +The patches for each release can be found along with a complete tarball of +a release in the following location: + + https://kernel.org/pub/linux/kernel/vX.Y/ + +For each stable release candidate, a patch representing the diff of all the +patches in the stable queue is uploaded here: + + https://kernel.org/pub/linux/kernel/vX.Y/stable-review/ + +As a convenience for people that want to test release candidates of stable +releases, a branch of the kernel git tree is created containing all of the +patches in the given stable queue. These branches are available in the +following repository: + + git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git + +A branch exists for each of the stable releases. Note, though, that these +branches are recreated from scratch by applying the queued stable patches +on top of the prior release. As a consequence, the branches are not fast- +forward and can change after a release candidate has been announced. The +contents of the branch may therefore not match exactly what was released +as the release candidate, depending on when you fetch it. No tags are +created to track individual release candidates. If you're interested in +exact reproducibility of a stable release candidate, please use the patches +from the location mentioned above.
On Mon, Aug 12, 2019 at 11:05:53AM +0200, Thierry Reding wrote:
On Fri, Aug 09, 2019 at 05:49:59PM +0200, Greg Kroah-Hartman wrote:
On Fri, Aug 09, 2019 at 03:04:49PM +0200, Thierry Reding wrote:
On Fri, Aug 09, 2019 at 10:52:53AM +0200, Greg Kroah-Hartman wrote:
On Mon, Aug 05, 2019 at 01:48:21PM +0200, Thierry Reding wrote:
Hi Greg,
Sorry for the delay, this got pushed down my queue...
I stumbled across something as I was attempting to automate more parts of our process to generate these reports. The original test results were from a different version of the tree: 5.2.6-rc1-gdbc7f5c7df28. I suspect that's the same thing that you were discussing with Pavel regarding the IP tunnel patch that was added subsequent to the announcement.
Just for my understanding, does this mean that the patch still makes it into the 5.2.6 release, or was it supposed to go into 5.2.7?
One problem that I ran into was that when I tried to correlate the test results with your announcement email, there's no indication other than the branch name and the release candidate name (5.2.6-rc1 in this case), so there's no way to uniquely identify which test run belongs to the announcement. Given that there are no tags for the release candidates means that that's also not an option to uniquely associate with the builds and tests.
While the differences between the two builds are very minor here, I wonder if there could perhaps in the future be a problem where I report successful results for a test, but the same tests would be broken by a patch added to the stable-rc branch subsequent to the announcement. The test report would be misleading in that case.
I noticed that you do add a couple of X-KernelTest-* headers to your announcement emails, so I'm wondering if perhaps it was possible for you to add another one that contains the exact SHA1 that corresponds to the snapshot that's the release candidate. That would allow everyone to uniquely associate test results with a specific release candidate.
That said, perhaps I've just got this all wrong and there's already a way to connect all the dots that I'm not aware of. Or maybe I'm being too pedantic here?
You aren't being pedantic, I think you are missing exactly what the linux-stable-rc tree is for and how it is created.
Granted, it's not really documented anywhere so it's not your fault :)
The linux-stable-rc tree is there ONLY for people who want to test the -rc kernels and can not, or do not want to, use the quilt tree of patches in the stable-queue.git tree on kernel.org. I generate the branches there from a script that throws away the current -rc branch and rebuilds it "from scratch" by applying the patches that are in the stable-quilt tree and then adds the -rc patch as well. This tree is generated multiple times when I am working on the queues and then when I want to do a "real" -rc release.
The branches are constantly rebased, so you can not rely on 'git pull' doing the right thing (unless you add --rebase to it), and are there for testing only.
Yes, you will see different results of a "-rc1" release in the tree depending on the time of day/week when I created the tree, and sometimes I generate them multiple times a day just to have some of the auto-builders give me results quickly (Linaro does pull from it and sends me results within the hour usually).
So does that help? Ideally everyone would just use the quilt trees from stable-queue.git, but no everyone likes that, so the -rc git tree is there to make automated testing "easier". If that works with your workflow, wonderful, feel free to use it. If not, then go with the stable-quilt.git tree, or the tarballs on kernel.org.
I'll have to look into that, to see if that'd work. I have to admit that having a git tree to point scripts at is rather convenient for automation.
And as for the SHA1 being in the emails, that doesn't make all that much sense as that SHA1 doesn't live very long. When I create the trees locally, I instantly delete them after pushing them to kernel.org so I can't regenerate them or do anything with them.
Fair enough. I suppose the worst thing that could happen is that we may fail to test a couple of commits occasionally. In the rare case where this actually matters we'll likely end up reporting the failure for the stable release, in which case it can be fixed in the next one.
DOes that help explain things better?
Yes, makes a lot more sense now. Thanks for taking the time to explain it. Do you want me to snapshot this and submit it as documentation somewhere for later reference?
It probably should go somewhere, but as the number of people that do "test stable kernels in an automated way" is very low, so far I've been doing ok with a one-by-one explaination. I guess if it's more obvious, more people would test, so sure, this should be cleaned up...
How about something like the below. It applies to the stable-queue.git repository.
Thierry
--- >8 --- From 4083add6ccb4a1c23edeba650170470bcc5d5205 Mon Sep 17 00:00:00 2001 From: Thierry Reding treding@nvidia.com Date: Mon, 12 Aug 2019 10:58:35 +0200 Subject: [PATCH] Describe the stable-queue release process
Add a README file that describes how release candidates for stable kernels are created and how users are expected to use them. This is reworded from Greg's reply here:
https://lore.kernel.org/stable/20190809085253.GA25046@kroah.com/
README | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 README
diff --git a/README b/README new file mode 100644 index 000000000000..868469a73f68 --- /dev/null +++ b/README @@ -0,0 +1,31 @@ +This repository is the canonical source for patches that make up the stable +kernel releases. It consists of a set of directories for each of the stable +kernels, as well as a directory that contains a snapshot of the patches for +each stable release.
+The patches for each release can be found along with a complete tarball of +a release in the following location:
+For each stable release candidate, a patch representing the diff of all the +patches in the stable queue is uploaded here:
+As a convenience for people that want to test release candidates of stable +releases, a branch of the kernel git tree is created containing all of the +patches in the given stable queue. These branches are available in the +following repository:
- git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
+A branch exists for each of the stable releases. Note, though, that these +branches are recreated from scratch by applying the queued stable patches +on top of the prior release. As a consequence, the branches are not fast- +forward and can change after a release candidate has been announced. The +contents of the branch may therefore not match exactly what was released +as the release candidate, depending on when you fetch it. No tags are +created to track individual release candidates. If you're interested in +exact reproducibility of a stable release candidate, please use the patches
+from the location mentioned above.
Sorry for the very long delay, cleaning out old emails...
This looks really good, thanks for writing it up, I've now applied it to the stable-queue tree.
greg k-h
On 8/2/19 3:39 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.2.6 release. There are 20 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.2.6-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.2.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks, -- Shuah
On Fri, Aug 02, 2019 at 05:25:40PM -0600, shuah wrote:
On 8/2/19 3:39 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.2.6 release. There are 20 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.2.6-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.2.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
Thanks for testing all of these and letting me know.
greg k-h
On Fri, 2 Aug 2019 at 15:28, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.2.6 release. There are 20 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.2.6-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.2.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.
Summary ------------------------------------------------------------------------
kernel: 5.2.6-rc1 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git git branch: linux-5.2.y git commit: 44397d30b22dd93340c705ef34bb61c16f43503b git describe: v5.2.4-235-g44397d30b22d Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.2-oe/build/v5.2.4-235-g...
No regressions (compared to build v5.2.4)
No fixes (compared to build v5.2.4)
Ran 21444 total tests in the following environments and test suites.
Environments -------------- - dragonboard-410c - hi6220-hikey - i386 - juno-r2 - qemu_arm - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - x86
Test Suites ----------- * build * install-android-platform-tools-r2600 * kselftest * libgpiod * libhugetlbfs * ltp-cap_bounds-tests * ltp-commands-tests * ltp-containers-tests * ltp-cpuhotplug-tests * ltp-cve-tests * ltp-dio-tests * ltp-fcntl-locktests-tests * ltp-filecaps-tests * ltp-fs_bind-tests * ltp-fs_perms_simple-tests * ltp-fsx-tests * ltp-hugetlb-tests * ltp-io-tests * ltp-ipc-tests * ltp-math-tests * ltp-mm-tests * ltp-nptl-tests * ltp-pty-tests * ltp-sched-tests * ltp-securebits-tests * ltp-syscalls-tests * ltp-timers-tests * network-basic-tests * perf * spectre-meltdown-checker-test * v4l2-compliance * ltp-fs-tests * ltp-open-posix-tests * kvm-unit-tests * kselftest-vsyscall-mode-native * kselftest-vsyscall-mode-none * ssuite
On Sat, Aug 03, 2019 at 11:20:05AM +0530, Naresh Kamboju wrote:
On Fri, 2 Aug 2019 at 15:28, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.2.6 release. There are 20 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.2.6-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.2.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.
Thanks for testing all of these and letting me know.
greg k-h
On 8/2/19 2:39 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.2.6 release. There are 20 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC. Anything received after that time might be too late.
Build results: total: 159 pass: 159 fail: 0 Qemu test results: total: 364 pass: 364 fail: 0
Guenter
On Sat, Aug 03, 2019 at 09:00:11AM -0700, Guenter Roeck wrote:
On 8/2/19 2:39 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.2.6 release. There are 20 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC. Anything received after that time might be too late.
Build results: total: 159 pass: 159 fail: 0 Qemu test results: total: 364 pass: 364 fail: 0
Great! Thanks for testing all of these and letting me know.
greg k-h
-
Greg Kroah-Hartman -
Guenter Roeck -
Naresh Kamboju -
shuah -
Thierry Reding