This is the start of the stable review cycle for the 6.13.10 release. There are 23 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 05 Apr 2025 15:16:11 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.13.10-rc1... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.13.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 6.13.10-rc1
Kent Overstreet kent.overstreet@linux.dev bcachefs: bch2_ioctl_subvolume_destroy() fixes
John Keeping jkeeping@inmusicbrands.com serial: 8250_dma: terminate correct DMA in tx_dma_flush()
Cheick Traore cheick.traore@foss.st.com serial: stm32: do not deassert RS485 RTS GPIO prematurely
Greg Kroah-Hartman gregkh@linuxfoundation.org perf tools: Fix up some comments and code to properly use the event_source bus
Luo Qiu luoqiu@kylinsec.com.cn memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove
Michal Pecio michal.pecio@gmail.com usb: xhci: Apply the link chain quirk on NEC isoc endpoints
Michal Pecio michal.pecio@gmail.com usb: xhci: Don't skip on Stopped - Length Invalid
Dominique Martinet dominique.martinet@atmark-techno.com net: usb: usbnet: restore usb%d name exception for local mac addresses
Fabio Porcedda fabio.porcedda@gmail.com net: usb: qmi_wwan: add Telit Cinterion FE990B composition
Fabio Porcedda fabio.porcedda@gmail.com net: usb: qmi_wwan: add Telit Cinterion FN990B composition
Sherry Sun sherry.sun@nxp.com tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
Cameron Williams cang1@live.co.uk tty: serial: 8250: Add Brainboxes XC devices
Cameron Williams cang1@live.co.uk tty: serial: 8250: Add some more device IDs
William Breathitt Gray wbg@kernel.org counter: microchip-tcb-capture: Fix undefined counter channel state on probe
Fabrice Gasnier fabrice.gasnier@foss.st.com counter: stm32-lptimer-cnt: fix error handling when enabling
Andres Traumann andres.traumann.01@gmail.com ALSA: hda/realtek: Bass speaker fixup for ASUS UM5606KA
Dhruv Deshpande dhrv.d@proton.me ALSA: hda/realtek: Support mute LED on HP Laptop 15s-du3xxx
Maxim Mikityanskiy maxtram95@gmail.com netfilter: socket: Lookup orig tuple for IPv6 SNAT
Abel Wu wuyun.abel@bytedance.com cgroup/rstat: Fix forceidle time in cpu.stat
Scott Mayhew smayhew@redhat.com nfsd: fix legacy client tracking initialization
Minjoong Kim pwn9uin@gmail.com atm: Fix NULL pointer dereference
Terry Junge linuxhid@cosmicgizmosystems.com HID: hid-plantronics: Add mic mute mapping and generalize quirks
Terry Junge linuxhid@cosmicgizmosystems.com ALSA: usb-audio: Add quirk for Plantronics headsets to fix control names
-------------
Diffstat:
Makefile | 4 +- drivers/counter/microchip-tcb-capture.c | 19 ++++ drivers/counter/stm32-lptimer-cnt.c | 24 +++-- drivers/hid/hid-plantronics.c | 144 ++++++++++++++---------------- drivers/memstick/host/rtsx_usb_ms.c | 1 + drivers/net/usb/qmi_wwan.c | 2 + drivers/net/usb/usbnet.c | 21 +++-- drivers/tty/serial/8250/8250_dma.c | 2 +- drivers/tty/serial/8250/8250_pci.c | 46 ++++++++++ drivers/tty/serial/fsl_lpuart.c | 17 ++++ drivers/tty/serial/stm32-usart.c | 4 +- drivers/usb/host/xhci-ring.c | 4 + drivers/usb/host/xhci.h | 13 ++- fs/bcachefs/fs-ioctl.c | 6 +- fs/nfsd/nfs4recover.c | 1 - kernel/cgroup/rstat.c | 29 +++--- net/atm/mpc.c | 2 + net/ipv6/netfilter/nf_socket_ipv6.c | 23 +++++ sound/pci/hda/patch_realtek.c | 2 + sound/usb/mixer_quirks.c | 51 +++++++++++ tools/perf/Documentation/intel-hybrid.txt | 12 +-- tools/perf/Documentation/perf-list.txt | 2 +- tools/perf/arch/x86/util/iostat.c | 2 +- tools/perf/builtin-stat.c | 2 +- tools/perf/util/mem-events.c | 2 +- tools/perf/util/pmu.c | 4 +- 26 files changed, 308 insertions(+), 131 deletions(-)
Hi!
This is the start of the stable review cycle for the 6.13.10 release. There are 23 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-6...
6.12 and 6.6 pass our testing, too:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-6... https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-6...
Tested-by: Pavel Machek (CIP) pavel@denx.de
Best regards, Pavel
Am 03.04.2025 um 17:20 schrieb Greg Kroah-Hartman:
This is the start of the stable review cycle for the 6.13.10 release. There are 23 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg oddities or regressions found.
Tested-by: Peter Schneider pschneider1968@googlemail.com
Beste Grüße, Peter Schneider
On Thu, Apr 03, 2025 at 04:20:17PM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.13.10 release. There are 23 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Tested-by: Mark Brown broonie@kernel.org
On 4/3/25 09:20, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.13.10 release. There are 23 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 05 Apr 2025 15:16:11 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.13.10-rc1... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.13.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan skhan@linuxfoundation.org
thanks, -- Shuah
On 4/3/25 08:20, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.13.10 release. There are 23 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 05 Apr 2025 15:16:11 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.13.10-rc1... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.13.y and the diffstat can be found below.
thanks,
greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:
Tested-by: Florian Fainelli florian.fainelli@broadcom.com
On Thu, 03 Apr 2025 16:20:17 +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.13.10 release. There are 23 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 05 Apr 2025 15:16:11 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.13.10-rc1... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.13.y and the diffstat can be found below.
thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v6.13: 10 builds: 10 pass, 0 fail 28 boots: 28 pass, 0 fail 116 tests: 116 pass, 0 fail
Linux version: 6.13.10-rc1-g8cbfaadfa0ec Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra186-p3509-0000+p3636-0001, tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Jon Hunter jonathanh@nvidia.com
Jon
On Thu, Apr 03, 2025 at 04:20:17PM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.13.10 release. There are 23 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 05 Apr 2025 15:16:11 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.13.10-rc1... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.13.y and the diffstat can be found below.
thanks,
greg k-h
Tested rc1 against the Fedora build system (aarch64, ppc64le, s390x, x86_64), and boot tested x86_64. No regressions noted.
Tested-by: Justin M. Forbes jforbes@fedoraproject.org
On 4/3/25 08:20, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.13.10 release. There are 23 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 05 Apr 2025 15:16:11 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.13.10-rc1... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.13.y and the diffstat can be found below.
thanks,
greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos re@w6rz.net
On Thu, 3 Apr 2025 at 20:56, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.13.10 release. There are 23 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 05 Apr 2025 15:16:11 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.13.10-rc1... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.13.y and the diffstat can be found below.
thanks,
greg k-h
Regressions on arm, arm64 and x86_64.
1) The selftests rseq failed across the boards and virtual environments. These test failures were also noticed on Linux mainline and next.
We will bisect these lists of regressions and get back to you.
* kselftest-rseq - rseq_basic_percpu_ops_mm_cid_test - rseq_basic_percpu_ops_test - rseq_basic_test - rseq_param_test - rseq_param_test_benchmark - rseq_param_test_compare_twice - rseq_param_test_mm_cid - rseq_param_test_mm_cid_benchmark - rseq_param_test_mm_cid_compare_twice
2) The clang-nightly build issues reported on mainline and next.
* S390, powerpc, build - clang-nightly-defconfig - clang-nightly-lkftconfig-hardening - clang-nightly-lkftconfig-lto-full - clang-nightly-lkftconfig-lto-thing
clang-nightly: ERROR: modpost: "wcslen" [fs/smb/client/cifs.ko] undefined! - https://lore.kernel.org/all/CA+G9fYuQHeGicnEx1d=XBC0p1LCsndi5q0p86V7pCZ02d8F...
3) The clang-nightly boot regressions with no console output have been reported on mainline and next.
* boot - clang-nightly-lkftconfig-hardening - clang-nightly-lkftconfig-kselftest - clang-nightly-lkftconfig-lto-full - clang-nightly-lkftconfig-lto-thing - gcc-13-lkftconfig-debug
v6.14-12245-g91e5bfe317d8: Boot regression: rk3399-rock-pi-4b dragonboard-410c dragonboard-845c no console output - https://lore.kernel.org/all/CA+G9fYve7+nXJNoV48TksXoMeVjgJuP8Gs=+1br+Qur1DPW...
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
## Build * kernel: 6.13.10-rc1 * git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git * git commit: 8cbfaadfa0ec371208123554d6ad9994433929bb * git describe: v6.13.7-385-g8cbfaadfa0ec * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.13.y/build/v6.13....
## Test Regressions (compared to v6.13.7-362-g3d21aad34dfa) * arm, build - clang-nightly-nhk8815_defconfig
* arm64, build - clang-nightly-allyesconfig
* dragonboard-410c, boot - clang-nightly-lkftconfig-hardening - clang-nightly-lkftconfig-kselftest - clang-nightly-lkftconfig-lto-full - clang-nightly-lkftconfig-lto-thing
* dragonboard-845c, boot - clang-nightly-lkftconfig-hardening - clang-nightly-lkftconfig-kselftest - clang-nightly-lkftconfig-lto-full - clang-nightly-lkftconfig-lto-thing - gcc-13-lkftconfig-debug
* e850-96, boot - clang-nightly-lkftconfig-kselftest
* fvp-aemva, boot - clang-nightly-lkftconfig-kselftest
* juno-r2, boot - clang-nightly-lkftconfig-kselftest
* dragonboard-410c, kselftest-rseq - rseq_basic_percpu_ops_mm_cid_test - rseq_basic_percpu_ops_test - rseq_basic_test - rseq_param_test - rseq_param_test_benchmark - rseq_param_test_compare_twice - rseq_param_test_mm_cid - rseq_param_test_mm_cid_benchmark - rseq_param_test_mm_cid_compare_twice
* dragonboard-845c, kselftest-rseq - rseq_basic_percpu_ops_mm_cid_test - rseq_basic_percpu_ops_test - rseq_basic_test - rseq_param_test - rseq_param_test_benchmark - rseq_param_test_compare_twice - rseq_param_test_mm_cid - rseq_param_test_mm_cid_benchmark - rseq_param_test_mm_cid_compare_twice
* e850-96, kselftest-rseq - rseq_basic_percpu_ops_mm_cid_test - rseq_basic_percpu_ops_test - rseq_basic_test - rseq_param_test - rseq_param_test_benchmark - rseq_param_test_compare_twice - rseq_param_test_mm_cid - rseq_param_test_mm_cid_benchmark - rseq_param_test_mm_cid_compare_twice
* powerpc, build - clang-nightly-defconfig - clang-nightly-lkftconfig-hardening - clang-nightly-lkftconfig-lto-full - clang-nightly-lkftconfig-lto-thing - clang-nightly-ppc64e_defconfig
* qemu-arm64, kselftest-rseq - rseq_basic_percpu_ops_mm_cid_test - rseq_basic_percpu_ops_test - rseq_basic_test - rseq_param_test - rseq_param_test_benchmark - rseq_param_test_compare_twice - rseq_param_test_mm_cid - rseq_param_test_mm_cid_benchmark - rseq_param_test_mm_cid_compare_twice
* qemu-i386, kselftest-rseq - rseq_basic_percpu_ops_mm_cid_test - rseq_basic_percpu_ops_test - rseq_param_test - rseq_param_test_benchmark - rseq_param_test_compare_twice - rseq_param_test_mm_cid - rseq_param_test_mm_cid_benchmark - rseq_param_test_mm_cid_compare_twice - shardfile-rseq
* qemu-x86_64, kselftest-rseq - rseq_basic_percpu_ops_mm_cid_test - rseq_basic_percpu_ops_test - rseq_basic_test - rseq_param_test - rseq_param_test_benchmark - rseq_param_test_compare_twice - rseq_param_test_mm_cid - rseq_param_test_mm_cid_benchmark - rseq_param_test_mm_cid_compare_twice
* rk3399-rock-pi-4b, boot - clang-nightly-lkftconfig-hardening - clang-nightly-lkftconfig-kselftest - clang-nightly-lkftconfig-lto-full - clang-nightly-lkftconfig-lto-thing
* s390, build - clang-nightly-defconfig - clang-nightly-lkftconfig-hardening - clang-nightly-lkftconfig-lto-full - clang-nightly-lkftconfig-lto-thing
* x86, kselftest-rseq - rseq_basic_percpu_ops_mm_cid_test - rseq_basic_percpu_ops_test - rseq_basic_test - rseq_param_test - rseq_param_test_benchmark - rseq_param_test_compare_twice - rseq_param_test_mm_cid - rseq_param_test_mm_cid_benchmark - rseq_param_test_mm_cid_compare_twice
* x86_64, build - clang-nightly-allyesconfig
## Metric Regressions (compared to v6.13.7-362-g3d21aad34dfa)
## Test Fixes (compared to v6.13.7-362-g3d21aad34dfa)
## Metric Fixes (compared to v6.13.7-362-g3d21aad34dfa)
## Test result summary total: 125983, pass: 99795, fail: 7289, skip: 18899, xfail: 0
## Build Summary * arc: 5 total, 5 passed, 0 failed * arm: 139 total, 136 passed, 3 failed * arm64: 57 total, 56 passed, 1 failed * i386: 18 total, 18 passed, 0 failed * mips: 34 total, 33 passed, 1 failed * parisc: 4 total, 3 passed, 1 failed * powerpc: 40 total, 35 passed, 5 failed * riscv: 25 total, 23 passed, 2 failed * s390: 22 total, 18 passed, 4 failed * sh: 5 total, 5 passed, 0 failed * sparc: 4 total, 3 passed, 1 failed * x86_64: 49 total, 48 passed, 1 failed
## Test suites summary * boot * commands * kselftest-arm64 * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-efivarfs * kselftest-exec * kselftest-fpu * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-kcmp * kselftest-kvm * kselftest-livepatch * kselftest-membarrier * kselftest-memfd * kselftest-mincore * kselftest-mqueue * kselftest-net * kselftest-net-mptcp * kselftest-openat2 * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-rust * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-tc-testing * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user_events * kselftest-vDSO * kselftest-x86 * kunit * kvm-unit-tests * libgpiod * libhugetlbfs * log-parser-boot * log-parser-build-clang * log-parser-build-gcc * log-parser-test * ltp-capability * ltp-commands * ltp-containers * ltp-controllers * ltp-cpuhotplug * ltp-crypto * ltp-cve * ltp-dio * ltp-fcntl-locktests * ltp-fs * ltp-fs_bind * ltp-fs_perms_simple * ltp-hugetlb * ltp-ipc * ltp-math * ltp-mm * ltp-nptl * ltp-pty * ltp-sched * ltp-smoke * ltp-syscalls * ltp-tracing * perf * rcutorture
-- Linaro LKFT https://lkft.linaro.org
On Sat, Apr 05, 2025 at 11:50:59AM +0530, Naresh Kamboju wrote:
On Thu, 3 Apr 2025 at 20:56, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.13.10 release. There are 23 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 05 Apr 2025 15:16:11 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.13.10-rc1... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.13.y and the diffstat can be found below.
thanks,
greg k-h
Regressions on arm, arm64 and x86_64.
The selftests rseq failed across the boards and virtual environments. These test failures were also noticed on Linux mainline and next.
We will bisect these lists of regressions and get back to you.
Thanks, this I'll care about, but:
- kselftest-rseq
- rseq_basic_percpu_ops_mm_cid_test
- rseq_basic_percpu_ops_test
- rseq_basic_test
- rseq_param_test
- rseq_param_test_benchmark
- rseq_param_test_compare_twice
- rseq_param_test_mm_cid
- rseq_param_test_mm_cid_benchmark
- rseq_param_test_mm_cid_compare_twice
The clang-nightly build issues reported on mainline and next.
- S390, powerpc, build
- clang-nightly-defconfig
- clang-nightly-lkftconfig-hardening
- clang-nightly-lkftconfig-lto-full
- clang-nightly-lkftconfig-lto-thing
clang-nightly: ERROR: modpost: "wcslen" [fs/smb/client/cifs.ko] undefined!
The clang-nightly boot regressions with no console output have been reported on mainline and next.
These 2 I don't, as that's a mainline issue first.
thanks,
greg k-h
-
Florian Fainelli -
Greg Kroah-Hartman -
Jon Hunter -
Justin Forbes -
Mark Brown -
Naresh Kamboju -
Pavel Machek -
Peter Schneider -
Ron Economos -
Shuah Khan