This is the start of the stable review cycle for the 5.10.153 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.153-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.10.153-rc1
Lukas Wunner lukas@wunner.de serial: Deassert Transmit Enable on probe in driver-specific way
Lino Sanfilippo LinoSanfilippo@gmx.de serial: core: move RS485 configuration tasks from drivers into core
Biju Das biju.das.jz@bp.renesas.com can: rcar_canfd: rcar_canfd_handle_global_receive(): fix IRQ storm on global FIFO receive
Anshuman Khandual anshuman.khandual@arm.com arm64/kexec: Test page size support with new TGRAN range values
James Morse james.morse@arm.com arm64/mm: Fix __enable_mmu() for new TGRAN range values
Yu Kuai yukuai3@huawei.com scsi: sd: Revert "scsi: sd: Remove a local variable"
D Scott Phillips scott@os.amperecomputing.com arm64: Add AMPERE1 to the Spectre-BHB affected list
Vladimir Oltean vladimir.oltean@nxp.com net: enetc: survive memory pressure without crashing
Suresh Devarakonda ramad@nvidia.com net/mlx5: Fix crash during sync firmware reset
Tariq Toukan tariqt@nvidia.com net/mlx5: Fix possible use-after-free in async command interface
Hyong Youb Kim hyonkim@cisco.com net/mlx5e: Do not increment ESN when updating IPsec ESN state
Nicolas Dichtel nicolas.dichtel@6wind.com nh: fix scope used to find saddr when adding non gw nh
Yang Yingliang yangyingliang@huawei.com net: ehea: fix possible memory leak in ehea_register_port()
Aaron Conole aconole@redhat.com openvswitch: switch from WARN to pr_warn
Takashi Iwai tiwai@suse.de ALSA: aoa: Fix I2S device accounting
Yang Yingliang yangyingliang@huawei.com ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()
Juergen Borleis jbe@pengutronix.de net: fec: limit register access on i.MX6UL
Sudeep Holla sudeep.holla@arm.com PM: domains: Fix handling of unavailable/disabled idle states
Yang Yingliang yangyingliang@huawei.com net: ksz884x: fix missing pci_disable_device() on error in pcidev_init()
Slawomir Laba slawomirx.laba@intel.com i40e: Fix flow-type by setting GL_HASH_INSET registers
Sylwester Dziedziuch sylwesterx.dziedziuch@intel.com i40e: Fix VF hang when reset is triggered on another VF
Slawomir Laba slawomirx.laba@intel.com i40e: Fix ethtool rx-flow-hash setting for X722
Eric Dumazet edumazet@google.com ipv6: ensure sane device mtu in tunnels
Hans Verkuil hverkuil-cisco@xs4all.nl media: vivid: set num_in/outputs to 0 if not supported
Hans Verkuil hverkuil-cisco@xs4all.nl media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'
Hans Verkuil hverkuil-cisco@xs4all.nl media: v4l2-dv-timings: add sanity checks for blanking values
Hans Verkuil hverkuil-cisco@xs4all.nl media: vivid: dev->bitmap_cap wasn't freed in all cases
Hans Verkuil hverkuil-cisco@xs4all.nl media: vivid: s_fbuf: add more sanity checks
Mario Limonciello mario.limonciello@amd.com PM: hibernate: Allow hybrid sleep to work with s2idle
Dongliang Mu dzm91@hust.edu.cn can: mcp251x: mcp251x_can_probe(): add missing unregister_candev() in error path
Dongliang Mu dzm91@hust.edu.cn can: mscan: mpc5xxx: mpc5xxx_can_probe(): add missing put_clock() in error path
Neal Cardwell ncardwell@google.com tcp: fix indefinite deferral of RTO with SACK reneging
Lu Wei luwei32@huawei.com tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
Eric Dumazet edumazet@google.com tcp: minor optimization in tcp_add_backlog()
Zhang Changzhong zhangchangzhong@huawei.com net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY
Zhengchao Shao shaozhengchao@huawei.com net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed
Eric Dumazet edumazet@google.com kcm: annotate data-races around kcm->rx_wait
Eric Dumazet edumazet@google.com kcm: annotate data-races around kcm->rx_psock
Íñigo Huguet ihuguet@redhat.com atlantic: fix deadlock at aq_nic_stop
Raju Rangoju Raju.Rangoju@amd.com amd-xgbe: add the bit rate quirk for Molex cables
Raju Rangoju Raju.Rangoju@amd.com amd-xgbe: fix the SFP compliance codes check for DAC cables
Chen Zhongjin chenzhongjin@huawei.com x86/unwind/orc: Fix unreliable stack dump with gcov
Zhengchao Shao shaozhengchao@huawei.com net: hinic: fix the issue of double release MBOX callback of VF
Zhengchao Shao shaozhengchao@huawei.com net: hinic: fix the issue of CMDQ memory leaks
Zhengchao Shao shaozhengchao@huawei.com net: hinic: fix memory leak when reading function table
Zhengchao Shao shaozhengchao@huawei.com net: hinic: fix incorrect assignment issue in hinic_set_interrupt_cfg()
Yang Yingliang yangyingliang@huawei.com net: netsec: fix error handling in netsec_register_mdio()
Xin Long lucien.xin@gmail.com tipc: fix a null-ptr-deref in tipc_topsrv_accept
Maxim Levitsky mlevitsk@redhat.com perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
Yang Yingliang yangyingliang@huawei.com ALSA: ac97: fix possible memory leak in snd_ac97_dev_register()
Srinivasa Rao Mandadapu quic_srivasam@quicinc.com ASoC: qcom: lpass-cpu: Mark HDMI TX parity register as volatile
Randy Dunlap rdunlap@infradead.org arc: iounmap() arg is volatile
Srinivasa Rao Mandadapu quic_srivasam@quicinc.com ASoC: qcom: lpass-cpu: mark HDMI TX registers as volatile
Nathan Huckleberry nhuck@google.com drm/msm: Fix return type of mdp4_lvds_connector_mode_valid
Alexander Stein alexander.stein@ew.tq-group.com media: v4l2: Fix v4l2_i2c_subdev_set_name function documentation
Wei Yongjun weiyongjun1@huawei.com net: ieee802154: fix error return code in dgram_bind()
Rik van Riel riel@surriel.com mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages
Yuanzheng Song songyuanzheng@huawei.com mm/memory: add non-anonymous page check in the copy_present_page()
M. Vefa Bicakci m.v.b@runbox.com xen/gntdev: Prevent leaking grants
Jan Beulich jbeulich@suse.com Xen/gntdev: don't ignore kernel unmapping error
Heiko Carstens hca@linux.ibm.com s390/pci: add missing EX_TABLE entries to __pcistg_mio_inuser()/__pcilg_mio_inuser()
Heiko Carstens hca@linux.ibm.com s390/futex: add missing EX_TABLE entry to __futex_atomic_op()
Adrian Hunter adrian.hunter@intel.com perf auxtrace: Fix address filter symbol name match for modules
Christian A. Ehrhardt lk@c--e.de kernfs: fix use-after-free in __kernfs_remove
William Breathitt Gray william.gray@linaro.org counter: microchip-tcb-capture: Handle Signal1 read and Synapse
Matthew Ma mahongwei@zeku.com mmc: core: Fix kernel panic when remove non-standard SDIO card
Brian Norris briannorris@chromium.org mmc: sdhci_am654: 'select', not 'depends' REGMAP_MMIO
Johan Hovold johan+linaro@kernel.org drm/msm/dp: fix IRQ lifetime
Johan Hovold johan+linaro@kernel.org drm/msm/hdmi: fix memory corruption with too many bridges
Johan Hovold johan+linaro@kernel.org drm/msm/dsi: fix memory corruption with too many bridges
Manish Rangankar mrangankar@marvell.com scsi: qla2xxx: Use transport-defined speed mask for supported_speeds
Miquel Raynal miquel.raynal@bootlin.com mac802154: Fix LQI recording
Bernd Edlinger bernd.edlinger@hotmail.de exec: Copy oldsighand->action under spin-lock
Li Zetao lizetao1@huawei.com fs/binfmt_elf: Fix memory leak in load_elf_binary()
Hyunwoo Kim imv4bel@gmail.com fbdev: smscufx: Fix several use-after-free bugs
Cosmin Tanislav cosmin.tanislav@analog.com iio: temperature: ltc2983: allocate iio channels once
Shreeya Patel shreeya.patel@collabora.com iio: light: tsl2583: Fix module unloading
Matti Vaittinen mazziesaccount@gmail.com tools: iio: iio_utils: fix digit calculation
Mathias Nyman mathias.nyman@linux.intel.com xhci: Remove device endpoints from bandwidth list when freeing the device
Mathias Nyman mathias.nyman@linux.intel.com xhci: Add quirk to reset host back to default state at shutdown
Tony O'Brien tony.obrien@alliedtelesis.co.nz mtd: rawnand: marvell: Use correct logic for nand-keep-config
Jens Glathe jens.glathe@oldschoolsolutions.biz usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller
Justin Chen justinpopo6@gmail.com usb: bdc: change state when port disconnected
Thinh Nguyen Thinh.Nguyen@synopsys.com usb: dwc3: gadget: Don't set IMI for no_interrupt
Thinh Nguyen Thinh.Nguyen@synopsys.com usb: dwc3: gadget: Stop processing more requests on IMI
Hannu Hartikainen hannu@hrtk.in USB: add RESET_RESUME quirk for NVIDIA Jetson devices in RCM
Jason A. Donenfeld Jason@zx2c4.com ALSA: rme9652: use explicitly signed char
Jason A. Donenfeld Jason@zx2c4.com ALSA: au88x0: use explicitly signed char
Steven Rostedt (Google) rostedt@goodmis.org ALSA: Use del_timer_sync() before freeing timer
Anssi Hannula anssi.hannula@bitwise.fi can: kvaser_usb: Fix possible completions during init_completion
Yang Yingliang yangyingliang@huawei.com can: j1939: transport: j1939_session_skb_drop_old(): spin_unlock_irqrestore() before kfree_skb()
-------------
Diffstat:
Makefile | 4 +- arch/arc/include/asm/io.h | 2 +- arch/arc/mm/ioremap.c | 2 +- arch/arm64/include/asm/cpufeature.h | 9 +- arch/arm64/include/asm/cputype.h | 4 + arch/arm64/include/asm/sysreg.h | 36 +++++--- arch/arm64/kernel/head.S | 6 +- arch/arm64/kernel/proton-pack.c | 6 ++ arch/arm64/kvm/reset.c | 10 ++- arch/s390/include/asm/futex.h | 3 +- arch/s390/pci/pci_mmio.c | 8 +- arch/x86/events/intel/lbr.c | 2 +- arch/x86/kernel/unwind_orc.c | 2 +- drivers/base/power/domain.c | 4 + drivers/counter/microchip-tcb-capture.c | 18 +++- drivers/firmware/efi/libstub/arm64-stub.c | 2 +- .../gpu/drm/msm/disp/mdp4/mdp4_lvds_connector.c | 5 +- drivers/gpu/drm/msm/dp/dp_display.c | 2 +- drivers/gpu/drm/msm/dsi/dsi.c | 6 ++ drivers/gpu/drm/msm/hdmi/hdmi.c | 5 ++ drivers/iio/light/tsl2583.c | 2 +- drivers/iio/temperature/ltc2983.c | 13 ++- drivers/media/test-drivers/vivid/vivid-core.c | 38 +++++++- drivers/media/test-drivers/vivid/vivid-core.h | 2 + drivers/media/test-drivers/vivid/vivid-vid-cap.c | 27 ++++-- drivers/media/v4l2-core/v4l2-dv-timings.c | 14 +++ drivers/mmc/core/sdio_bus.c | 3 +- drivers/mmc/host/Kconfig | 3 +- drivers/mtd/nand/raw/marvell_nand.c | 2 +- drivers/net/can/mscan/mpc5xxx_can.c | 8 +- drivers/net/can/rcar/rcar_canfd.c | 6 +- drivers/net/can/spi/mcp251x.c | 5 +- drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 4 +- drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 4 +- drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 17 ++-- drivers/net/ethernet/aquantia/atlantic/aq_macsec.c | 96 +++++++++++++++----- drivers/net/ethernet/aquantia/atlantic/aq_nic.h | 2 + drivers/net/ethernet/freescale/enetc/enetc.c | 5 ++ drivers/net/ethernet/freescale/fec_main.c | 46 +++++++++- drivers/net/ethernet/huawei/hinic/hinic_debugfs.c | 18 ++-- drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c | 2 +- drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c | 2 +- drivers/net/ethernet/huawei/hinic/hinic_sriov.c | 1 - drivers/net/ethernet/ibm/ehea/ehea_main.c | 1 + drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 100 ++++++++++++--------- drivers/net/ethernet/intel/i40e/i40e_type.h | 4 + drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 43 ++++++--- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h | 1 + drivers/net/ethernet/lantiq_etop.c | 1 - drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 10 +-- .../ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 3 - drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c | 6 +- drivers/net/ethernet/micrel/ksz884x.c | 2 +- drivers/net/ethernet/socionext/netsec.c | 2 + drivers/scsi/qla2xxx/qla_attr.c | 28 +++++- drivers/scsi/sd.c | 3 +- drivers/tty/serial/8250/8250_omap.c | 3 + drivers/tty/serial/8250/8250_pci.c | 9 +- drivers/tty/serial/8250/8250_port.c | 12 +-- drivers/tty/serial/fsl_lpuart.c | 8 +- drivers/tty/serial/imx.c | 8 +- drivers/tty/serial/serial_core.c | 61 ++++++++++--- drivers/usb/core/quirks.c | 9 ++ drivers/usb/dwc3/gadget.c | 8 +- drivers/usb/gadget/udc/bdc/bdc_udc.c | 1 + drivers/usb/host/xhci-mem.c | 20 +++-- drivers/usb/host/xhci-pci.c | 12 ++- drivers/usb/host/xhci.c | 10 ++- drivers/usb/host/xhci.h | 1 + drivers/video/fbdev/smscufx.c | 55 ++++++------ drivers/xen/gntdev.c | 30 +++++-- fs/binfmt_elf.c | 3 +- fs/exec.c | 4 +- fs/kernfs/dir.c | 5 +- include/linux/mlx5/driver.h | 2 +- include/media/v4l2-common.h | 3 +- include/uapi/linux/videodev2.h | 3 +- kernel/power/hibernate.c | 2 +- mm/hugetlb.c | 2 +- mm/memory.c | 11 +++ net/can/j1939/transport.c | 4 +- net/core/net_namespace.c | 7 ++ net/ieee802154/socket.c | 4 +- net/ipv4/nexthop.c | 2 +- net/ipv4/tcp_input.c | 3 +- net/ipv4/tcp_ipv4.c | 7 +- net/ipv6/ip6_gre.c | 12 +-- net/ipv6/ip6_tunnel.c | 11 +-- net/ipv6/sit.c | 8 +- net/kcm/kcmsock.c | 23 +++-- net/mac802154/rx.c | 5 +- net/openvswitch/datapath.c | 3 +- net/tipc/topsrv.c | 16 +++- sound/aoa/soundbus/i2sbus/core.c | 7 +- sound/pci/ac97/ac97_codec.c | 1 + sound/pci/au88x0/au88x0.h | 6 +- sound/pci/au88x0/au88x0_core.c | 2 +- sound/pci/rme9652/hdsp.c | 26 +++--- sound/pci/rme9652/rme9652.c | 22 ++--- sound/soc/qcom/lpass-cpu.c | 10 +++ sound/synth/emux/emux.c | 7 +- tools/iio/iio_utils.c | 4 + tools/perf/util/auxtrace.c | 10 ++- 103 files changed, 805 insertions(+), 337 deletions(-)
On Wed, 02 Nov 2022 03:32:43 +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.153 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.153-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below.
thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v5.10: 11 builds: 11 pass, 0 fail 28 boots: 28 pass, 0 fail 75 tests: 75 pass, 0 fail
Linux version: 5.10.153-rc1-g2f6e4754098c Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Jon Hunter jonathanh@nvidia.com
Jon
On 2022/11/2 10:32, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.153 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.153-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below.
thanks,
greg k-h
Tested on arm64 and x86 for 5.10.153-rc1,
Kernel repo:https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git Branch: linux-5.10.y Version: 5.10.153-rc1 Commit: 6d20868ac152a5a55c2b2c345683e402b32611d6 Compiler: gcc version 7.3.0 (GCC)
arm64: -------------------------------------------------------------------- Testcase Result Summary: total: 9023 passed: 9023 failed: 0 timeout: 0 --------------------------------------------------------------------
x86: -------------------------------------------------------------------- Testcase Result Summary: total: 9023 passed: 9023 failed: 0 timeout: 0 -------------------------------------------------------------------- Tested-by: Hulk Robot hulkrobot@huawei.com
On Wed, Nov 02, 2022 at 03:32:43AM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.153 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000. Anything received after that time might be too late.
Hi Greg,
5.10.153-rc1 tested.
Run tested on: - Intel Skylake x86_64 (nuc6 i5-6260U)
In addition - build tested for: - Allwinner A64 - Allwinner H3 - Allwinner H5 - Allwinner H6 - Rockchip RK3288 - Rockchip RK3328 - Rockchip RK3399pro
Tested-by: Rudi Heitbaum rudi@heitbaum.com -- Rudi
Hi1
This is the start of the stable review cycle for the 5.10.153 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5...
Tested-by: Pavel Machek (CIP) pavel@denx.de
Best regards, Pavel
On 11/1/22 19:32, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.153 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.153-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below.
thanks,
greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:
Tested-by: Florian Fainelli f.fainelli@gmail.com
On Wed, Nov 02, 2022 at 03:32:43AM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.153 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000. Anything received after that time might be too late.
Build results: total: 163 pass: 163 fail: 0 Qemu test results: total: 475 pass: 475 fail: 0
Tested-by: Guenter Roeck linux@roeck-us.net
Guenter
This is the start of the stable review cycle for the 5.10.153 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000. Anything received after that time might be too late.
Compiled and booted on my x86_64 and ARM64 test systems. No errors or regressions.
Tested-by: Allen Pais apais@linux.microsoft.com
Thanks.
On Wed, 2 Nov 2022 at 08:42, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.10.153 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.153-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing lkft@linaro.org
NOTE: 1) Build failures: Perf on arm64/i386/x86 on 5.4/5.10/5.15, not on arm32. perf build started to pass on stable-rc 6.0 and mainline and next master branches.
Build error: util/annotate.c: In function 'symbol__disassemble_bpf': util/annotate.c:1739:9: error: too few arguments to function 'init_disassemble_info' 1739 | init_disassemble_info(&info, s, | ^~~~~~~~~~~~~~~~~~~~~ In file included from util/annotate.c:1692: /usr/include/dis-asm.h:472:13: note: declared here 472 | extern void init_disassemble_info (struct disassemble_info *dinfo, void *stream, | ^~~~~~~~~~~~~~~~~~~~~ make[4]: *** [/ tools/build/Makefile.build:97: /home/tuxbuild/.cache/tuxmake/builds/1/build/util/annotate.o] Error 1
Build log link, https://builds.tuxbuild.com/2GyMi25XnyDaaKJ170L0VWShkT9/
2) Following kernel warning always noticed on x86_64 with list of kselftest merge configs enabled.
This is not a regression this warning has been occuring from the day we have enabled kselfest runs on stable-rc 5.10.
[ 0.256413] RETBleed: Mitigation: untrained return thunk [ 0.257416] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.258415] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.269751] ------------[ cut here ]------------ [ 0.270425] missing return thunk: lkdtm_rodata_do_nothing+0x0/0x10-lkdtm_rodata_do_nothing+0x5/0x10: e9 00 00 00 00 [ 0.270447] WARNING: CPU: 0 PID: 0 at arch/x86/kernel/alternative.c:712 apply_returns+0x1ca/0x1f0 [ 0.272414] Modules linked in: [ 0.273419] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.153-rc1 #1 [ 0.274416] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 0.275417] RIP: 0010:apply_returns+0x1ca/0x1f0 [ 0.276416] Code: 05 02 00 0f 85 0d ff ff ff 4d 89 e0 b9 05 00 00 00 4c 89 fa 4c 89 e6 48 c7 c7 30 f3 e4 ae c6 05 f7 1f 05 02 01 e8 0b 64 08 01 <0f> 0b e9 e5 fe ff ff c7 45 c1 cc cc cc cc c7 44 10 fc cc cc cc cc [ 0.277414] RSP: 0000:ffffffffaf203d98 EFLAGS: 00010282 [ 0.278414] RAX: 0000000000000000 RBX: ffffffffaf7941f8 RCX: 0000000000000000 [ 0.279414] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffad64d062 [ 0.280414] RBP: ffffffffaf203e60 R08: 0000000000000001 R09: 0000000000000001 [ 0.281413] R10: ffffffffaf2998e0 R11: ffffffffaf2998e0 R12: ffffffffaeaf8c60 [ 0.282414] R13: ffffffffaf7b2f18 R14: cccccccccccccccc R15: ffffffffaeaf8c65 [ 0.283416] FS: 0000000000000000(0000) GS:ffff8a53fbc00000(0000) knlGS:0000000000000000 [ 0.284416] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.285414] CR2: ffff8a53fffff000 CR3: 0000000021e26000 CR4: 00000000003506f0 [ 0.286415] Call Trace: [ 0.286787] ? apply_retpolines+0x5e/0x2a0 [ 0.287421] ? _cond_resched+0x1a/0x60 [ 0.287987] alternative_instructions+0x7d/0x13f [ 0.288416] check_bugs+0xeed/0xf2e [ 0.289418] start_kernel+0x515/0x54c [ 0.289968] x86_64_start_reservations+0x24/0x2a [ 0.290415] x86_64_start_kernel+0x9d/0xa5 [ 0.291417] secondary_startup_64_no_verify+0xc2/0xcb [ 0.292174] irq event stamp: 1709 [ 0.292418] hardirqs last enabled at (1721): [<ffffffffad64d062>] console_unlock+0x502/0x5e0 [ 0.293415] hardirqs last disabled at (1732): [<ffffffffad64cfbd>] console_unlock+0x45d/0x5e0 [ 0.294417] softirqs last enabled at (1742): [<ffffffffad5cee36>] irq_enter_rcu+0x76/0x80 [ 0.295415] softirqs last disabled at (1753): [<ffffffffad5cee1b>] irq_enter_rcu+0x5b/0x80 [ 0.296418] ---[ end trace 665160b92b6d6ceb ]---
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.... https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10....
## Build * kernel: 5.10.153-rc1 * git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc * git branch: linux-5.10.y * git commit: 2f6e4754098c797c9befbb1c13ea97e89dbd665f * git describe: v5.10.152-92-g2f6e4754098c * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10....
## No Test Regressions (compared to v5.10.152)
## No Metric Regressions (compared to v5.10.152)
## No Test Fixes (compared to v5.10.152)
## No Metric Fixes (compared to v5.10.152)
## Test result summary total: 148664, pass: 125743, fail: 3265, skip: 19222, xfail: 434
## Build Summary * arc: 5 total, 5 passed, 0 failed * arm: 149 total, 148 passed, 1 failed * arm64: 47 total, 45 passed, 2 failed * i386: 37 total, 35 passed, 2 failed * mips: 27 total, 27 passed, 0 failed * parisc: 6 total, 6 passed, 0 failed * powerpc: 28 total, 23 passed, 5 failed * riscv: 12 total, 12 passed, 0 failed * s390: 12 total, 12 passed, 0 failed * sh: 12 total, 12 passed, 0 failed * sparc: 6 total, 6 passed, 0 failed * x86_64: 40 total, 38 passed, 2 failed
## Test suites summary * fwts * igt-gpu-tools * kselftest-android * kselftest-arm64 * kselftest-arm64/arm64.btitest.bti_c_func * kselftest-arm64/arm64.btitest.bti_j_func * kselftest-arm64/arm64.btitest.bti_jc_func * kselftest-arm64/arm64.btitest.bti_none_func * kselftest-arm64/arm64.btitest.nohint_func * kselftest-arm64/arm64.btitest.paciasp_func * kselftest-arm64/arm64.nobtitest.bti_c_func * kselftest-arm64/arm64.nobtitest.bti_j_func * kselftest-arm64/arm64.nobtitest.bti_jc_func * kselftest-arm64/arm64.nobtitest.bti_none_func * kselftest-arm64/arm64.nobtitest.nohint_func * kselftest-arm64/arm64.nobtitest.paciasp_func * kselftest-breakpoints * kselftest-capabilities * kselftest-drivers-dma-buf * kselftest-efivarfs * kselftest-filesystems * kselftest-filesystems-binderfs * kselftest-firmware * kselftest-fpu * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-livepatch * kselftest-membarrier * kselftest-memfd * kselftest-memory-hotplug * kselftest-mincore * kselftest-mount * kselftest-mqueue * kselftest-net * kselftest-net-forwarding * kselftest-net-mptcp * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-vm * kselftest-x86 * kselftest-zram * kunit * kvm-unit-tests * libgpiod * libhugetlbfs * log-parser-boot * log-parser-test * ltp-cap_bounds * ltp-commands * ltp-containers * ltp-controllers * ltp-cpuhotplug * ltp-crypto * ltp-cve * ltp-dio * ltp-fcntl-locktests * ltp-filecaps * ltp-fs * ltp-fs_bind * ltp-fs_perms_simple * ltp-fsx * ltp-hugetlb * ltp-io * ltp-ipc * ltp-math * ltp-mm * ltp-nptl * ltp-open-posix-tests * ltp-pty * ltp-sched * ltp-securebits * ltp-smoke * ltp-syscalls * ltp-tracing * network-basic-tests * packetdrill * perf * perf/Zstd-perf.data-compression * rcutorture * v4l2-compliance * vdso
-- Linaro LKFT https://lkft.linaro.org
Hi Greg,
On Wed, Nov 02, 2022 at 03:32:43AM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.153 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000. Anything received after that time might be too late.
Build test (gcc version 11.3.1 20221016): mips: 63 configs -> no failure arm: 104 configs -> no failure arm64: 3 configs -> no failure x86_64: 4 configs -> no failure alpha allmodconfig -> no failure powerpc allmodconfig -> no failure riscv allmodconfig -> no failure s390 allmodconfig -> no failure xtensa allmodconfig -> no failure
Boot test: x86_64: Booted on my test laptop. No regression. x86_64: Booted on qemu. No regression. [1] arm64: Booted on rpi4b (4GB model). No regression. [2]
[1]. https://openqa.qa.codethink.co.uk/tests/2091 [2]. https://openqa.qa.codethink.co.uk/tests/2094
Tested-by: Sudip Mukherjee sudip.mukherjee@codethink.co.uk