Hi Nobuhiro,
On Mon, 15 Feb 2021 at 21:00, Nobuhiro Iwamatsu nobuhiro1.iwamatsu@toshiba.co.jp wrote:
Add the ethernet controller node in Toshiba Visconti5 SoC-specific DT file. And enable this node in TMPV7708 RM main board's board-specific DT file.
Signed-off-by: Nobuhiro Iwamatsu nobuhiro1.iwamatsu@toshiba.co.jp
.../boot/dts/toshiba/tmpv7708-rm-mbrc.dts | 18 +++++++++++++ arch/arm64/boot/dts/toshiba/tmpv7708.dtsi | 25 +++++++++++++++++++ 2 files changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts index ed0bf7f13f54..48fa8776e36f 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts @@ -41,3 +41,21 @@ &uart1 { clocks = <&uart_clk>; clock-names = "apb_pclk"; };
+&piether {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
clocks = <&clk300mhz>, <&clk125mhz>;
clock-names = "stmmaceth", "phy_ref_clk";
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0: ethernet-phy@1 {
device_type = "ethernet-phy";
reg = <0x1>;
This build error was noticed on LKFT builder while building arm64 dtb on linux next 20210216 tag.
arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts:52.3-4 syntax error FATAL ERROR: Unable to parse input tree
Reported-by: Naresh Kamboju naresh.kamboju@linaro.org
https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/jobs/1033072509#L38...
-- Linaro LKFT https://lkft.linaro.org