greybus-dev December 2025

greybus-dev@lists.linaro.org

9 participants
12 discussions

[PATCH v2] staging: greybus: arche-apb-ctrl: switch to device_property_read_bool

by Julioccps

Switch from the deprecated of_property_read_bool() to the common device_property_read_bool() API. This makes the driver agnostic to the underlying firmware interface (DT or ACPI) and simplifies the logic. Since the driver is no longer strictly dependent on Device Tree, include <linux/mod_devicetable.h> directly for the struct of_device_id definition, instead of relying on implicit inclusion via <linux/of_irq.h>, which has been removed as it is unused. Also rename apb_ctrl_get_devtree_data() to apb_ctrl_get_fw_data() to better reflect the agnostic nature of the new implementation. Signed-off-by: Julio Cesar Carvalho de Paula Souza <julio191096(a)gmail.com> --- drivers/staging/greybus/arche-apb-ctrl.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/staging/greybus/arche-apb-ctrl.c b/drivers/staging/greybus/arche-apb-ctrl.c index 90ab32638d3f..eea9648a461c 100644 --- a/drivers/staging/greybus/arche-apb-ctrl.c +++ b/drivers/staging/greybus/arche-apb-ctrl.c @@ -10,13 +10,14 @@ #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/interrupt.h> -#include <linux/of_irq.h> #include <linux/module.h> #include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/pm.h> +#include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/spinlock.h> +#include <linux/mod_devicetable.h> #include "arche_platform.h" static void apb_bootret_deassert(struct device *dev); @@ -314,7 +315,7 @@ static ssize_t state_show(struct device *dev, static DEVICE_ATTR_RW(state); -static int apb_ctrl_get_devtree_data(struct platform_device *pdev, +static int apb_ctrl_get_fw_data(struct platform_device *pdev, struct arche_apb_ctrl_drvdata *apb) { struct device *dev = &pdev->dev; @@ -378,7 +379,7 @@ static int apb_ctrl_get_devtree_data(struct platform_device *pdev, } /* Only applicable for platform >= V2 */ - if (of_property_read_bool(pdev->dev.of_node, "gb,spi-en-active-high")) + if (device_property_read_bool(&pdev->dev, "gb,spi-en-active-high")) apb->spi_en_polarity_high = true; return 0; @@ -394,7 +395,7 @@ static int arche_apb_ctrl_probe(struct platform_device *pdev) if (!apb) return -ENOMEM; - ret = apb_ctrl_get_devtree_data(pdev, apb); + ret = apb_ctrl_get_fw_data(pdev, apb); if (ret) { dev_err(dev, "failed to get apb devicetree data %d\n", ret); return ret; @@ -403,7 +404,7 @@ static int arche_apb_ctrl_probe(struct platform_device *pdev) /* Initially set APB to OFF state */ apb->state = ARCHE_PLATFORM_STATE_OFF; /* Check whether device needs to be enabled on boot */ - if (of_property_read_bool(pdev->dev.of_node, "arche,init-disable")) + if (device_property_read_bool(&pdev->dev, "arche,init-disable")) apb->init_disabled = true; platform_set_drvdata(pdev, apb); -- 2.52.0

2 weeks, 3 days

[RFC PATCH v2 00/12] greybus: introduce CPC as transport layer

by Damien Riégel

Hi, This patchset brings support for Silicon Labs' CPC (Co-Processor Communication) protocol as transport layer for Greybus. This is introduced as a module that sits between Greybus and CPC Host Device Driver implementations, like SDIO or SPI, which are not part of this RFC. If there's no push back with this RFC, the final patchset ready for upstream will include the SDIO driver. The goal of this module is to implement some of the features of Unipro that Greybus relies upon, like reliable transmission. CPC takes care of detecting transmission errors and retransmit frames if necessary. That feature is not part of the RFC to keep it concise, but it's planned for a future patchset. There's also a flow-control feature, to prevent from sending messages to cports that don't have anymore room. In order to implement these features, a 4-byte header is prepended to Greybus messages, making the whole header 12 bytes (Greybus header itself being 8 bytes). This RFC starts by implementing a shim layer that sits between physical bus drivers (like SDIO and SPI) and Greybus, and progressively add more elements to it to make it useful in its own right. +----------------------------------------------------+ | Greybus | +----------------------------------------------------+ /|\ | \|/ +----------------------------------------------------+ | CPC | +----------------------------------------------------+ /|\ /|\ /|\ | | | \|/ \|/ \|/ +----------+ +---------+ +-----------+ | SDIO | | SPI | | Others | +----------+ +---------+ +-----------+ Changes in v2: - v1 included a new protocol for Bluetooth HCI, this has been dropped to focus on CPC itself - likewise, there was an SPI driver, it has been dropped of this RFC for the same reason - v1 introduced CPC in a big commit, this time it's been split in smaller commits to make review manageable Damien Riégel (12): greybus: cpc: add minimal CPC Host Device infrastructure greybus: cpc: introduce CPC cport structure greybus: cpc: use socket buffers instead of gb_message in TX path greybus: cpc: pack cport ID in Greybus header greybus: cpc: switch RX path to socket buffers greybus: cpc: introduce CPC header structure greybus: cpc: account for CPC header size in RX and TX path greybus: cpc: add and validate sequence numbers greybus: cpc: acknowledge all incoming messages greybus: cpc: use holding queue instead of sending out immediately greybus: cpc: honour remote's RX window greybus: cpc: let host device drivers dequeue TX frames MAINTAINERS | 6 + drivers/greybus/Kconfig | 2 + drivers/greybus/Makefile | 2 + drivers/greybus/cpc/Kconfig | 10 ++ drivers/greybus/cpc/Makefile | 6 + drivers/greybus/cpc/cpc.h | 76 +++++++++ drivers/greybus/cpc/cport.c | 107 ++++++++++++ drivers/greybus/cpc/header.c | 146 +++++++++++++++++ drivers/greybus/cpc/header.h | 54 +++++++ drivers/greybus/cpc/host.c | 287 +++++++++++++++++++++++++++++++++ drivers/greybus/cpc/host.h | 58 +++++++ drivers/greybus/cpc/protocol.c | 169 +++++++++++++++++++ 12 files changed, 923 insertions(+) create mode 100644 drivers/greybus/cpc/Kconfig create mode 100644 drivers/greybus/cpc/Makefile create mode 100644 drivers/greybus/cpc/cpc.h create mode 100644 drivers/greybus/cpc/cport.c create mode 100644 drivers/greybus/cpc/header.c create mode 100644 drivers/greybus/cpc/header.h create mode 100644 drivers/greybus/cpc/host.c create mode 100644 drivers/greybus/cpc/host.h create mode 100644 drivers/greybus/cpc/protocol.c -- 2.49.0

2 weeks, 6 days

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

greybus-dev December 2025