greybus-dev

greybus-dev@lists.linaro.org

15 participants
700 discussions

[PATCH] staging: greybus: arpc.h: remove duplicate line.

by Nathan Howard

Fix checkpatch.pl issue of the form: "CHECK: Please don't use multiple blank lines". Signed-off-by: Nathan Howard <adanhawthorn(a)gmail.com> --- drivers/staging/greybus/arpc.h | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/staging/greybus/arpc.h b/drivers/staging/greybus/arpc.h index 7fbddfc..c0b63c0 100644 --- a/drivers/staging/greybus/arpc.h +++ b/drivers/staging/greybus/arpc.h @@ -74,7 +74,6 @@ struct arpc_response_message { __u8 result; /* Result of RPC */ } __packed; - /* ARPC requests */ #define ARPC_TYPE_CPORT_CONNECTED 0x01 #define ARPC_TYPE_CPORT_QUIESCE 0x02 -- 2.7.4

9 years

[PATCH] staging: greybus: uart: fix uninitialized newline.flow_control

by Colin King

From: Colin Ian King <colin.king(a)canonical.com> Currently newline.flow_control is uninitialized, so it can contain any garbage from the stack. I believe it should be initialized with GB_SERIAL_AUTO_RTSCTS_EN enabled if the termios c_cflag is CRTSCTS enabled. Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- drivers/staging/greybus/uart.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c index 248ad66..b542f67 100644 --- a/drivers/staging/greybus/uart.c +++ b/drivers/staging/greybus/uart.c @@ -506,6 +506,8 @@ static void gb_tty_set_termios(struct tty_struct *tty, newline.parity = termios->c_cflag & PARENB ? (termios->c_cflag & PARODD ? 1 : 2) + (termios->c_cflag & CMSPAR ? 2 : 0) : 0; + newline.flow_control = termios->c_cflag & CRTSCTS ? + GB_SERIAL_AUTO_RTSCTS_EN : 0; switch (termios->c_cflag & CSIZE) { case CS5: -- 2.10.2

9 years

[PATCH] staging: greybus: es2.c: fix some coding style issues

by Gioh Kim

Fix two coding style issues: 1. line over 80 characters 2. Octal permissions are preffered than symbolic ones Signed-off-by: Gioh Kim <gi-oh.kim(a)profitbricks.com> --- drivers/staging/greybus/es2.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/staging/greybus/es2.c b/drivers/staging/greybus/es2.c index 93afd93..f7b24e0 100644 --- a/drivers/staging/greybus/es2.c +++ b/drivers/staging/greybus/es2.c @@ -1085,7 +1085,8 @@ static void apb_log_get(struct es2_ap_dev *es2, char *buf) retval = usb_control_msg(es2->usb_dev, usb_rcvctrlpipe(es2->usb_dev, 0), GB_APB_REQUEST_LOG, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, + USB_DIR_IN | USB_TYPE_VENDOR | + USB_RECIP_INTERFACE, 0x00, 0x00, buf, APB1_LOG_MSG_SIZE, @@ -1151,7 +1152,7 @@ static void usb_log_enable(struct es2_ap_dev *es2) if (IS_ERR(es2->apb_log_task)) return; /* XXX We will need to rename this per APB */ - es2->apb_log_dentry = debugfs_create_file("apb_log", S_IRUGO, + es2->apb_log_dentry = debugfs_create_file("apb_log", 0444, gb_debugfs_get(), es2, &apb_log_fops); } @@ -1408,7 +1409,7 @@ static int ap_probe(struct usb_interface *interface, /* XXX We will need to rename this per APB */ es2->apb_log_enable_dentry = debugfs_create_file("apb_log_enable", - (S_IWUSR | S_IRUGO), + 0644, gb_debugfs_get(), es2, &apb_log_enable_fops); -- 2.5.0

9 years

[PATCH] staging: greybus: operation: add generic timeout support

by Johan Hovold

Add a struct timer_list to struct gb_operation and use that to implement generic operation timeouts. This simplifies the synchronous operation handling somewhat while also providing a generic timeout mechanism that drivers can use for asynchronous operations. Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/staging/greybus/loopback.c | 1 + drivers/staging/greybus/operation.c | 50 ++++++++++++++++++++++++++----------- drivers/staging/greybus/operation.h | 2 ++ 3 files changed, 39 insertions(+), 14 deletions(-) diff --git a/drivers/staging/greybus/loopback.c b/drivers/staging/greybus/loopback.c index 6c2a41c638c3..4bee33f62fd4 100644 --- a/drivers/staging/greybus/loopback.c +++ b/drivers/staging/greybus/loopback.c @@ -629,6 +629,7 @@ static int gb_loopback_async_operation(struct gb_loopback *gb, int type, mutex_lock(&gb->mutex); ret = gb_operation_request_send(operation, gb_loopback_async_operation_callback, + 0, GFP_KERNEL); if (ret) goto error; diff --git a/drivers/staging/greybus/operation.c b/drivers/staging/greybus/operation.c index 0123109a1070..3023012808d9 100644 --- a/drivers/staging/greybus/operation.c +++ b/drivers/staging/greybus/operation.c @@ -273,18 +273,40 @@ static void gb_operation_request_handle(struct gb_operation *operation) static void gb_operation_work(struct work_struct *work) { struct gb_operation *operation; + int ret; operation = container_of(work, struct gb_operation, work); - if (gb_operation_is_incoming(operation)) + if (gb_operation_is_incoming(operation)) { gb_operation_request_handle(operation); - else + } else { + ret = del_timer_sync(&operation->timer); + if (!ret) { + /* Cancel request message if scheduled by timeout. */ + if (gb_operation_result(operation) == -ETIMEDOUT) + gb_message_cancel(operation->request); + } + operation->callback(operation); + } gb_operation_put_active(operation); gb_operation_put(operation); } +static void gb_operation_timeout(unsigned long arg) +{ + struct gb_operation *operation = (void *)arg; + + if (gb_operation_result_set(operation, -ETIMEDOUT)) { + /* + * A stuck request message will be cancelled from the + * workqueue. + */ + queue_work(gb_operation_completion_wq, &operation->work); + } +} + static void gb_operation_message_init(struct gb_host_device *hd, struct gb_message *message, u16 operation_id, size_t payload_size, u8 type) @@ -518,6 +540,9 @@ gb_operation_create_common(struct gb_connection *connection, u8 type, gfp_flags)) { goto err_request; } + + setup_timer(&operation->timer, gb_operation_timeout, + (unsigned long)operation); } operation->flags = op_flags; @@ -679,6 +704,7 @@ static void gb_operation_sync_callback(struct gb_operation *operation) * gb_operation_request_send() - send an operation request message * @operation: the operation to initiate * @callback: the operation completion callback + * @timeout: operation timeout in milliseconds, or zero for no timeout * @gfp: the memory flags to use for any allocations * * The caller has filled in any payload so the request message is ready to go. @@ -693,6 +719,7 @@ static void gb_operation_sync_callback(struct gb_operation *operation) */ int gb_operation_request_send(struct gb_operation *operation, gb_operation_callback callback, + unsigned int timeout, gfp_t gfp) { struct gb_connection *connection = operation->connection; @@ -742,6 +769,11 @@ int gb_operation_request_send(struct gb_operation *operation, if (ret) goto err_put_active; + if (timeout) { + operation->timer.expires = jiffies + msecs_to_jiffies(timeout); + add_timer(&operation->timer); + } + return 0; err_put_active: @@ -763,26 +795,16 @@ int gb_operation_request_send_sync_timeout(struct gb_operation *operation, unsigned int timeout) { int ret; - unsigned long timeout_jiffies; ret = gb_operation_request_send(operation, gb_operation_sync_callback, - GFP_KERNEL); + timeout, GFP_KERNEL); if (ret) return ret; - if (timeout) - timeout_jiffies = msecs_to_jiffies(timeout); - else - timeout_jiffies = MAX_SCHEDULE_TIMEOUT; - - ret = wait_for_completion_interruptible_timeout(&operation->completion, - timeout_jiffies); + ret = wait_for_completion_interruptible(&operation->completion); if (ret < 0) { /* Cancel the operation if interrupted */ gb_operation_cancel(operation, -ECANCELED); - } else if (ret == 0) { - /* Cancel the operation if op timed out */ - gb_operation_cancel(operation, -ETIMEDOUT); } return gb_operation_result(operation); diff --git a/drivers/staging/greybus/operation.h b/drivers/staging/greybus/operation.h index de09a2c7de54..7529f01b2529 100644 --- a/drivers/staging/greybus/operation.h +++ b/drivers/staging/greybus/operation.h @@ -98,6 +98,7 @@ struct gb_operation { struct work_struct work; gb_operation_callback callback; struct completion completion; + struct timer_list timer; struct kref kref; atomic_t waiters; @@ -164,6 +165,7 @@ bool gb_operation_response_alloc(struct gb_operation *operation, int gb_operation_request_send(struct gb_operation *operation, gb_operation_callback callback, + unsigned int timeout, gfp_t gfp); int gb_operation_request_send_sync_timeout(struct gb_operation *operation, unsigned int timeout); -- 2.10.2

9 years

[PATCH] staging: greybus: Move Documentation to Documentation/

by Viresh Kumar

Move all greybus documentation to the top level Documentation/ directory, as that's the obvious place where everyone will look for it. Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> --- .../Documentation => Documentation/greybus}/firmware/authenticate.c | 0 .../Documentation => Documentation/greybus}/firmware/firmware-management | 0 .../greybus/Documentation => Documentation/greybus}/firmware/firmware.c | 0 .../greybus/Documentation => Documentation/greybus}/sysfs-bus-greybus | 0 4 files changed, 0 insertions(+), 0 deletions(-) rename {drivers/staging/greybus/Documentation => Documentation/greybus}/firmware/authenticate.c (100%) rename {drivers/staging/greybus/Documentation => Documentation/greybus}/firmware/firmware-management (100%) rename {drivers/staging/greybus/Documentation => Documentation/greybus}/firmware/firmware.c (100%) rename {drivers/staging/greybus/Documentation => Documentation/greybus}/sysfs-bus-greybus (100%) diff --git a/drivers/staging/greybus/Documentation/firmware/authenticate.c b/Documentation/greybus/firmware/authenticate.c similarity index 100% rename from drivers/staging/greybus/Documentation/firmware/authenticate.c rename to Documentation/greybus/firmware/authenticate.c diff --git a/drivers/staging/greybus/Documentation/firmware/firmware-management b/Documentation/greybus/firmware/firmware-management similarity index 100% rename from drivers/staging/greybus/Documentation/firmware/firmware-management rename to Documentation/greybus/firmware/firmware-management diff --git a/drivers/staging/greybus/Documentation/firmware/firmware.c b/Documentation/greybus/firmware/firmware.c similarity index 100% rename from drivers/staging/greybus/Documentation/firmware/firmware.c rename to Documentation/greybus/firmware/firmware.c diff --git a/drivers/staging/greybus/Documentation/sysfs-bus-greybus b/Documentation/greybus/sysfs-bus-greybus similarity index 100% rename from drivers/staging/greybus/Documentation/sysfs-bus-greybus rename to Documentation/greybus/sysfs-bus-greybus -- 2.7.1.410.g6faf27b

9 years

[PATCH] [linux-next] staging: greybus: Remove duplicate include file

by Masanari Iida

This patch removed duplicated include line. Signed-off-by: Masanari Iida <standby24x7(a)gmail.com> --- drivers/staging/greybus/authentication.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/staging/greybus/authentication.c b/drivers/staging/greybus/authentication.c index 168626ba0c03..6c5dcb1c226b 100644 --- a/drivers/staging/greybus/authentication.c +++ b/drivers/staging/greybus/authentication.c @@ -16,7 +16,6 @@ #include "greybus_authentication.h" #include "firmware.h" -#include "greybus.h" #define CAP_TIMEOUT_MS 1000 -- 2.11.0.616.g8f60064c1f53

9 years

[PATCH] staging: greybus: loopback: fix broken udelay

by Johan Hovold

The loopback driver allows the user to set a minimum delay of up to one second to be inserted between test iterations (i.e. request submissions). The delay is currently specified in microseconds and is implemented using udelay. Busy looping for long periods is not just anti-social; udelay must not be used for delays longer than a few milliseconds due to the risk of integer overflow. Replace the broken udelay with a usleep_range with a 100 us range for short delays (< 20 ms) and otherwise revert to using msleep. Fixes: b36f04fa9417 ("greybus: loopback: Convert thread delay to microseconds") Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/staging/greybus/loopback.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/staging/greybus/loopback.c b/drivers/staging/greybus/loopback.c index 6c2a41c638c3..a8329daf1e57 100644 --- a/drivers/staging/greybus/loopback.c +++ b/drivers/staging/greybus/loopback.c @@ -1061,8 +1061,13 @@ static int gb_loopback_fn(void *data) gb_loopback_calculate_stats(gb, !!error); } gb->send_count++; - if (us_wait) - udelay(us_wait); + + if (us_wait) { + if (us_wait < 20000) + usleep_range(us_wait, us_wait + 100); + else + msleep(us_wait / 1000); + } } gb_pm_runtime_put_autosuspend(bundle); -- 2.10.2

9 years

[PATCH] greybus: Fix coding stye error

by mrossibellom＠gmail.com

From: Maxime Rossi Bellom <mrossibellom(a)gmail.com> Split line before funtion argument. Error was reported by checkpatch.pl as WARNING: line over 80 characters Signed-off-by: Maxime Rossi Bellom <mrossibellom(a)gmail.com> --- drivers/staging/greybus/fw-management.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/greybus/fw-management.c b/drivers/staging/greybus/fw-management.c index 3cd6cf0..d88117e 100644 --- a/drivers/staging/greybus/fw-management.c +++ b/drivers/staging/greybus/fw-management.c @@ -516,7 +516,8 @@ static int fw_mgmt_ioctl(struct fw_mgmt *fw_mgmt, unsigned int cmd, */ fw_mgmt->mode_switch_started = true; - ret = gb_interface_request_mode_switch(fw_mgmt->connection->intf); + ret = gb_interface_request_mode_switch( + fw_mgmt->connection->intf); if (ret) { dev_err(fw_mgmt->parent, "Mode-switch failed: %d\n", ret); -- 2.7.4

9 years

[PATCH] staging: greybus: sdio: Prefer u32 over uint32_t

by Franck Demathieu

It fixes the following issue reported by checkpatch.pl: Prefer kernel type 'u32' over 'uint32_t' Signed-off-by: Franck Demathieu <fdemathieu(a)gmail.com> --- drivers/staging/greybus/sdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/greybus/sdio.c b/drivers/staging/greybus/sdio.c index 66b37ea..101ca50 100644 --- a/drivers/staging/greybus/sdio.c +++ b/drivers/staging/greybus/sdio.c @@ -52,7 +52,7 @@ struct gb_sdio_host { static inline bool single_op(struct mmc_command *cmd) { - uint32_t opcode = cmd->opcode; + u32 opcode = cmd->opcode; return opcode == MMC_WRITE_BLOCK || opcode == MMC_READ_SINGLE_BLOCK; -- 2.10.1

9 years

[PATCH] staging: greybus: uart: fix TIOCGSERIAL flags

by Johan Hovold

This driver does not have a low-latency mode and should not report anything else. Also drop the skip-test flag which isn't used either. Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/staging/greybus/uart.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c index 6d39f4a04754..248ad6661a02 100644 --- a/drivers/staging/greybus/uart.c +++ b/drivers/staging/greybus/uart.c @@ -624,7 +624,6 @@ static int get_serial_info(struct gb_tty *gb_tty, struct serial_struct tmp; memset(&tmp, 0, sizeof(tmp)); - tmp.flags = ASYNC_LOW_LATENCY | ASYNC_SKIP_TEST; tmp.type = PORT_16550A; tmp.line = gb_tty->minor; tmp.xmit_fifo_size = 16; -- 2.10.2

9 years

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

greybus-dev