On Thu, Jan 10, 2019 at 11:21:04PM +0530, Nishad Kamdar wrote:
Use the gpiod interface instead of the deprecated old non-descriptor interface while continuing to ignore gpio flags from device tree in functions "deassert_reset()" and "assert_reset()" for now.
Signed-off-by: Nishad Kamdar nishadkamdar@gmail.com
Changes in v5:
- Change the commit message.
- Restore the names of the gpio device-tree properties without the "-gpio" suffix.
Changes in v4:
- Use gpiod_set_raw_value() for deassert_reset() and assert_reset() as gpiod_set_value() will change the sematics of these calls by taking any gpio flags into account.
- Remove some unnecesssary line breaks.
- Restore 'spi_en' gpio check in fw_flashing_seq() as it is currently optional.
Changes in v3:
- Add this patch in a patchset.
Changes in v2:
- Resolved compilation errors.
Also looks good now. You can add my
Reviewed-by: Johan Hovold johan@kernel.org
Found one really minor nit below, which doesn't really need to be fixed, but since you may need to update the third patch, you might as well consider this too.
/* It's not mandatory to support power management interface */
- apb->pwroff_gpio = of_get_named_gpio(np, "pwr-off-gpios", 0);
- if (apb->pwroff_gpio < 0) {
dev_err(dev, "failed to get power off gpio\n");
return apb->pwroff_gpio;
- }
- ret = devm_gpio_request_one(dev, apb->pwroff_gpio,
GPIOF_IN, "pwroff_n");
- if (ret) {
dev_err(dev, "Failed requesting pwroff_n gpio %d\n",
apb->pwroff_gpio);
- apb->pwroff = devm_gpiod_get_optional(dev, "pwr-off",
GPIOD_IN);
Looks like you don't need to break the above statement any more either.
- if (IS_ERR(apb->pwroff)) {
ret = PTR_ERR(apb->pwroff);
return ret; }dev_err(dev, "Failed requesting pwroff_n GPIO: %d\n", ret);
/* Do not make clock mandatory as of now (for DB3) */
- apb->clk_en_gpio = of_get_named_gpio(np, "clock-en-gpio", 0);
- if (apb->clk_en_gpio < 0) {
dev_warn(dev, "failed to get clock en gpio\n");
- } else if (gpio_is_valid(apb->clk_en_gpio)) {
ret = devm_gpio_request_one(dev, apb->clk_en_gpio,
GPIOF_OUT_INIT_LOW, "apb_clk_en");
if (ret) {
dev_warn(dev, "Failed requesting APB clock en gpio %d\n",
apb->clk_en_gpio);
return ret;
}
- apb->clk_en = devm_gpiod_get_optional(dev, "clock-en",
GPIOD_OUT_LOW);
Same here?
- if (IS_ERR(apb->clk_en)) {
ret = PTR_ERR(apb->clk_en);
dev_err(dev, "Failed requesting APB clock en GPIO: %d\n", ret);
}return ret;
Johan