Add boot-gpios which is required for enabling bootloader backdoor for flashing firmware to cc1352p7.
Also fix the incorrect reset-gpio.
Signed-off-by: Ayush Singh ayush@beagleboard.org --- arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index 70de288d728e..6c9d1dc26379 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -888,7 +888,8 @@ &main_uart6 {
mcu { compatible = "ti,cc1352p7"; - reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>; + boot-gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>; + reset-gpios = <&main_gpio0 14 GPIO_ACTIVE_HIGH>; vdds-supply = <&vdd_3v3>; }; };