Hi Ayush,
On Sat, Mar 16, 2024 at 12:19 AM Ayush Singh ayushdevel1325@gmail.com wrote:
MikroBUS is an open standard developed by MikroElektronika for connecting add-on boards to microcontrollers or microprocessors. It essentially allows you to easily expand the functionality of your main boards using these add-on boards.
This patchset adds mikroBUS as a Linux bus type and provides a driver to parse, and flash mikroBUS manifest and register the mikroBUS board.
As Russel had provided the feedback, this patchset does not add support for mikrobus, but a subset of mikrobus add-on boards which have a 1-wire click ID EEPROM with an identifier blob that is similar to the greybus manifest. This series lacks the necessary context and details to the specifications that is implemented.
https://www.mikroe.com/clickid - you should atleast point to this specs.
The v1 and v2 of this patchset was submitted by Vaishnav M A back in 2020. This patchset also includes changes made over the years as part of BeagleBoards kernel.
Link: https://www.mikroe.com/mikrobus Link: https://docs.beagleboard.org/latest/boards/beagleplay/ Link: https://lore.kernel.org/lkml/20200818124815.11029-1-vaishnav@beagleboard.org... Patch v2
Thank you for making the effort to upstream this, arriving at the latest revision of the public available click ID hardware took almost 2-3 years and I could not personally keep up with upstreaming, my sincere apologies to the maintainers that provided feedback on the earlier revisions. I hope an updated version of this series lands upstream with your work as the efforts made at BeagleBoard.org Foundation makes development simpler by adding plug and play support to these add-on boards. Also this series mentions only the case where mikroBUS port is present physically on the board, but there can be mikroBUS ports appearing over greybus and that is the reason why greybus manifest was chose as descriptor format - the series needs to describe these details so that a reviewer has the necessary information to review your patches. A link to beagleconnect is also helpful to reviewers.
https://docs.beagleboard.org/latest/projects/beagleconnect/index.html
Changes in v3:
- Use phandle instead of busname for spi
- Use spi board info for registering new device
- Convert dt bindings to yaml
- Add support for clickID
- Code cleanup and style changes
- Additions required to spi, serdev, w1 and regulator subsystems
Changes in v2:
- support for adding mikroBUS ports from DT overlays,
- remove debug sysFS interface for adding mikrobus ports,
- consider extended pin usage/deviations from mikrobus standard specifications
- use greybus CPort protocol enum instead of new protocol enums
- Fix cases of wrong indentation, ignoring return values, freeing allocated resources in case of errors and other style suggestions in v1 review.
Ayush Singh (7):
It looks like the version you have sent is very similar to the version I had previously updated for Beagleboard git with only rebases and cleanup, but I don't see major functional changes. I request you give credit to the original author atleast as a Co-author with Co-developed by tag, As there there was a significant amount of work done by myself to come up with this specs and get everything working on close to 150 mikrobus add-on boards on physical mikroBUS ports and over greybus: https://github.com/vaishnavachath/manifesto/tree/mikrobusv3/manifests
The driver today is poorly written and was one of the first Linux kernel development work I did while I was still in college so I might have made a lot of blunders and just rebasing and reposting will not get this to an acceptable state, here is what I would recommend:
* Drop all the unnecessary changes in the mikroBUS driver to support fixed-regulators, fixed-clocks, serdev device .etc and implement minimal changes to support the mikroBUS clickid devices.
* Provide necessary justification to why the particular descriptor format (greybus manifest) is chosen, with pull request to manifesto and greybus-specification. https://github.com/projectara/greybus-spec and similar to : https://github.com/projectara/manifesto/pull/2
* Move the mikrobus W1 driver to w1/ subsytem, it is a standard W1 EEPROM driver (also a standard part with updated family code) * Keep a RFC series of changes where mikroBUS ports can appear over greybus to justify why the identifier format needs to be extended greybus manifest.
dt-bindings: misc: Add mikrobus-connector w1: Add w1_find_master_device
Dependent patches that goes to different subsytems should be sent first separately to avoid confusion and then your series should mention the necessary dependencies. (same for spi).
spi: Make of_find_spi_controller_by_node() available regulator: fixed-helper: export regulator_register_always_on greybus: Add mikroBUS manifest types mikrobus: Add mikrobus driver dts: ti: k3-am625-beagleplay: Add mikroBUS
Send this patch as DONOTMERGE till your bindings are accepted.
Vaishnav M A (1): serdev: add of_ helper to get serdev controller
Drop this from initial series, I will provide further feedback from my TI e-mail, Vaishnav Achath vaishnav.a@ti.com
Thank again for taking this up,
Thanks and Regards, Vaishnav
.../bindings/misc/mikrobus-connector.yaml | 110 ++ MAINTAINERS | 7 + .../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 76 +- drivers/misc/Kconfig | 1 + drivers/misc/Makefile | 1 + drivers/misc/mikrobus/Kconfig | 19 + drivers/misc/mikrobus/Makefile | 6 + drivers/misc/mikrobus/mikrobus_core.c | 942 ++++++++++++++++++ drivers/misc/mikrobus/mikrobus_core.h | 201 ++++ drivers/misc/mikrobus/mikrobus_id.c | 229 +++++ drivers/misc/mikrobus/mikrobus_manifest.c | 502 ++++++++++ drivers/misc/mikrobus/mikrobus_manifest.h | 20 + drivers/regulator/fixed-helper.c | 1 + drivers/spi/spi.c | 206 ++-- drivers/tty/serdev/core.c | 19 + drivers/w1/w1.c | 6 +- drivers/w1/w1_int.c | 27 + include/linux/greybus/greybus_manifest.h | 49 + include/linux/serdev.h | 4 + include/linux/spi/spi.h | 4 + include/linux/w1.h | 1 + 21 files changed, 2318 insertions(+), 113 deletions(-) create mode 100644 Documentation/devicetree/bindings/misc/mikrobus-connector.yaml create mode 100644 drivers/misc/mikrobus/Kconfig create mode 100644 drivers/misc/mikrobus/Makefile create mode 100644 drivers/misc/mikrobus/mikrobus_core.c create mode 100644 drivers/misc/mikrobus/mikrobus_core.h create mode 100644 drivers/misc/mikrobus/mikrobus_id.c create mode 100644 drivers/misc/mikrobus/mikrobus_manifest.c create mode 100644 drivers/misc/mikrobus/mikrobus_manifest.h
base-commit: 61996c073c9b070922ad3a36c981ca6ddbea19a5
2.44.0