Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20150619/

Failed boards:

dalmore arm-tegra_defconfig : FAILED 1:51.14 dalmore arm-multi_v7_defconfig : FAILED 1:14.97 dalmore arm-multi_lpae_defconfig : FAILED 1:17.42 omap5uevm arm-omap2plus_defconfig : FAILED 2:06.74 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.03 omap5uevm arm-multi_lpae_defconfig : FAILED 2:13.67

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:18.16 arndale arm-exynos_defconfig : passed 1:33.05 arndale arm-multi_v7_defconfig : passed 1:36.64 arndale arm-multi_lpae_defconfig : passed 1:22.82 bbb arm-omap2plus_defconfig : passed 1:47.25 bbb arm-multi_v7_defconfig : passed 1:25.79 capri arm-bcm_defconfig : passed 0:58.77 capri arm-multi_v7_defconfig : passed 0:52.47 chitra powerpc-pasemi_defconfig : passed 1:01.86 chitra powerpc-ppc64_defconfig : warnings 2:09.90 colombus arm-sunxi_defconfig : passed 1:14.04 colombus arm-multi_v7_defconfig : passed 1:22.49 colombus arm-multi_lpae_defconfig : passed 1:10.78 cosmic arm-imx_v6_v7_defconfig : passed 2:12.35 cosmic arm-multi_v7_defconfig : passed 1:47.20 cubie arm-sunxi_defconfig : passed 1:01.24 cubie arm-multi_v7_defconfig : passed 1:02.13 cubie2 arm-sunxi_defconfig : warnings 0:59.63 cubie2 arm-multi_v7_defconfig : warnings 1:02.44 cubie2 arm-multi_lpae_defconfig : warnings 1:11.20 cubox arm-multi_v7_defconfig : passed 1:28.20 cubox arm-mvebu_v7_defconfig : passed 1:25.03 hummingboard arm-imx_v6_v7_defconfig : warnings 1:37.09 hummingboard arm-multi_v7_defconfig : passed 1:14.11 jetsontk1 arm-tegra_defconfig : passed 0:54.56 jetsontk1 arm-multi_v7_defconfig : passed 0:59.93 jetsontk1 arm-multi_lpae_defconfig : passed 1:05.87 minnowmax x86-minnowmax_defconfig : passed 1:21.62 odroidu3 arm-exynos_defconfig : passed 2:13.15 pandaes arm-omap2plus_defconfig : warnings 1:37.19 pandaes arm-multi_v7_defconfig : passed 2:21.22 parallella arm-multi_v7_defconfig : passed 1:31.24 pi arm-exynos_defconfig : passed 0:56.48 pi arm-multi_v7_defconfig : passed 0:58.61 pi arm-multi_lpae_defconfig : passed 1:07.68 pit arm-exynos_defconfig : passed 0:53.26 pit arm-multi_v7_defconfig : passed 1:01.45 pit arm-multi_lpae_defconfig : passed 1:13.25 rk3288evb arm-multi_v7_defconfig : passed 0:52.44 rk3288evb arm-multi_lpae_defconfig : passed 0:44.57 sama5 arm-sama5_defconfig : passed 1:24.65 seaboard arm-tegra_defconfig : passed 1:02.35 seaboard arm-multi_v7_defconfig : passed 1:13.38 snow arm-exynos_defconfig : passed 2:27.68 snow arm-multi_v7_defconfig : passed 2:03.29 snow arm-multi_lpae_defconfig : passed 1:59.38 snowball arm-u8500_defconfig : passed 1:25.58 snowball arm-multi_v7_defconfig : passed 1:25.05 socfpga arm-socfpga_defconfig : passed 1:01.72 socfpga arm-multi_v7_defconfig : passed 1:33.63 trimslice arm-tegra_defconfig : passed 0:56.13 trimslice arm-multi_v7_defconfig : passed 1:43.73 wandboard arm-imx_v6_v7_defconfig : passed 1:23.95 wandboard arm-multi_v7_defconfig : passed 1:09.13

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 1:24.16 beaver arm-multi_v7_defconfig : OFFLINE 1:27.31

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

################################################################# ################################################################# ################################################################# ################################################################# ############################# 2.8 MiB/s done Bytes transferred = 6139488 (5dae60 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 tmp/dalmore-Ppq7RO/tegra114-dalmore.dtb tftp 0x83000000 tmp/dalmore-Ppq7RO/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.142 Filename 'tmp/dalmore-Ppq7RO/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.6 MiB/s done Bytes transferred = 34894 (884e hex) Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000

[PYBOOT] [dalmore 00:39]: u-boot: jumping to kernel image bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x5dae60 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff84d ... OK

Starting kernel ...

[PYBOOT] [dalmore 00:39]: u-boot: started kernel.

[PYBOOT] [dalmore 01:14]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:15]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:16]: Done.

========================================================================

Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

################################################################# ################################################################# ################################################################# ################################################################# ############################# 2.9 MiB/s done Bytes transferred = 6139480 (5dae58 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 tmp/dalmore-7rR7iP/tegra114-dalmore.dtb tftp 0x83000000 tmp/dalmore-7rR7iP/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.142 Filename 'tmp/dalmore-7rR7iP/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.6 MiB/s done Bytes transferred = 34894 (884e hex) Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000

[PYBOOT] [dalmore 00:36]: u-boot: jumping to kernel image bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x5dae58 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff84d ... OK

Starting kernel [PYBOOT] [dalmore 00:36]: u-boot: started kernel. ...

[PYBOOT] [dalmore 01:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:12]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:13]: Done.

========================================================================

Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 0.176530] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.186559] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.186917] Brought up 4 CPUs [ 0.205263] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.211534] CPU: All CPU(s) started in SVC mode. [ 0.219706] devtmpfs: initialized [ 0.344923] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.353690] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.368389] pinctrl core: initialized pinctrl subsystem [ 0.379544] NET: Registered protocol family 16 [ 0.387024] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.422619] cpuidle: using governor ladder [ 0.452714] cpuidle: using governor menu [ 0.535361] No ATAGs? [ 0.535670] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.543959] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.552839] tegra-mc 70019000.memory-controller: no memory timings for RAM code 3 registered [ 0.704260] dvdd_ts: Failed to request enable GPIO61: -517 [ 0.708814] reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517 [ 0.718076] usb1_vbus: Failed to request enable GPIO108: -517 [ 0.722846] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.732136] usb2_vbus: Failed to request enable GPIO86: -517 [ 0.736809] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.748576] VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517 [ 0.753862] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.769171] vgaarb: loaded [ 0.776348] SCSI subsystem initialized [ 0.779602] libata version 3.00 loaded. [ 0.785281] usbcore: registered new interface driver usbfs [ 0.789739] usbcore: registered new interface driver hub [ 0.794974] usbcore: registered new device driver usb [ 0.816907] tps65090 2-0048: No cache defaults, reading back from HW [ 0.852267] palmas 2-0058: Irq flag is 0x00000000

[PYBOOT] [dalmore 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:49]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:50]: Done.

========================================================================

Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.714054] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.734787] Synopsys Designware Multimedia Card Interface Driver [ 1.742032] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.749580] ledtrig-cpu: registered to indicate activity on CPUs [ 1.756033] usbcore: registered new interface driver usbhid [ 1.761856] usbhid: USB HID core driver [ 1.766968] mmc0: MAN_BKOPS_EN bit is not set [ 1.769196] NET: Registered protocol family 17 [ 1.769210] can: controller area network core (rev 20120528 abi 9) [ 1.769261] NET: Registered protocol family 29 [ 1.769269] can: raw protocol (rev 20120528) [ 1.769275] can: broadcast manager protocol (rev 20120528 t) [ 1.769286] can: netlink gateway (rev 20130117) max_hops=1 [ 1.769583] Key type dns_resolver registered [ 1.769663] omap_vc_init_channel: No PMIC info for vdd_core [ 1.769665] omap_vp_init: No PMIC info for vdd_core [ 1.769670] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.769672] omap_vp_init: No PMIC info for vdd_mm [ 1.769676] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.769678] omap_vp_init: No PMIC info for vdd_mpu [ 1.770206] Power Management for TI OMAP4+ devices. [ 1.770339] ThumbEE CPU extension supported. [ 1.770353] Registering SWP/SWPB emulation handler [ 1.775096] palmas 0-0048: Irq flag is 0x00000000 [ 1.851894] smsc95xx v1.0.4 [ 1.864206] mmc0: new high speed MMC card at address 0001 [ 1.870093] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 1.874929] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.881217] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.903321] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 86:95:2d:ed:86:b5 [ 2.144050] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.279946] hub 1-2:1.0: USB hub found [ 2.283965] hub 1-2:1.0: 3 ports detected

[PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:13]: Done.

========================================================================

Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.714263] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.725001] Synopsys Designware Multimedia Card Interface Driver [ 1.732257] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.739778] ledtrig-cpu: registered to indicate activity on CPUs [ 1.746218] usbcore: registered new interface driver usbhid [ 1.752041] usbhid: USB HID core driver [ 1.759132] NET: Registered protocol family 17 [ 1.763804] can: controller area network core (rev 20120528 abi 9) [ 1.770317] NET: Registered protocol family 29 [ 1.774970] can: raw protocol (rev 20120528) [ 1.779441] can: broadcast manager protocol (rev 20120528 t) [ 1.785370] can: netlink gateway (rev 20130117) max_hops=1 [ 1.791383] Key type dns_resolver registered [ 1.795928] omap_vc_init_channel: No PMIC info for vdd_core [ 1.801760] omap_vp_init: No PMIC info for vdd_core [ 1.806869] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.806878] mmc0: MAN_BKOPS_EN bit is not set [ 1.817078] omap_vp_init: No PMIC info for vdd_mm [ 1.822000] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.827730] omap_vp_init: No PMIC info for vdd_mpu [ 1.833044] mmc0: new high speed MMC card at address 0001 [ 1.833268] Power Management for TI OMAP4+ devices. [ 1.833402] ThumbEE CPU extension supported. [ 1.833417] Registering SWP/SWPB emulation handler [ 1.840169] palmas 0-0048: Irq flag is 0x00000000 [ 1.858480] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 1.863309] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.869583] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.907171] smsc95xx v1.0.4 [ 1.958617] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 52:49:cd:fc:76:de [ 2.199264] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.335121] hub 1-2:1.0: USB hub found [ 2.339139] hub 1-2:1.0: 3 ports detected

[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:05]: Done.

========================================================================

Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.074641] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.081676] omap_hsmmc 480ad000.mmc: lookup for GPIO cd failed [ 2.087815] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.094136] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.100984] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.110563] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.120053] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.122213] ata1: SATA link down (SStatus 0 SControl 300) [ 2.132775] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.139230] 480ad000.mmc supply vmmc not found, using dummy regulator [ 2.146336] omap_hsmmc 480ad000.mmc: could not set regulator OCR (-22) [ 2.192511] ledtrig-cpu: registered to indicate activity on CPUs [ 2.200388] oprofile: using timer interrupt. [ 2.205265] Initializing XFRM netlink socket [ 2.209794] NET: Registered protocol family 17 [ 2.214493] NET: Registered protocol family 15 [ 2.219194] mmc0: MAN_BKOPS_EN bit is not set [ 2.219360] Key type dns_resolver registered [ 2.219455] omap_vc_init_channel: No PMIC info for vdd_core [ 2.219459] omap_vp_init: No PMIC info for vdd_core [ 2.219470] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.219472] omap_vp_init: No PMIC info for vdd_mm [ 2.219484] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.219486] omap_vp_init: No PMIC info for vdd_mpu [ 2.220097] Power Management for TI OMAP4+ devices. [ 2.220335] ThumbEE CPU extension supported. [ 2.220354] Registering SWP/SWPB emulation handler [ 2.220363] SmartReflex Class3 initialized [ 2.235549] palmas 0-0048: Irq flag is 0x00000000 [ 2.286438] mmc0: new high speed MMC card at address 0001 [ 2.293455] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.298471] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.304927] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB

[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:05]: Done.