Kernel-build-reports April 2014

kernel-build-reports@lists.linaro.org

20 participants
319 discussions

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.36 Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig da850-evm: FAIL: davinci_all_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 14.9 sec: PASS legacy,da850evm 0 min 13.9 sec: PASS omap2plus_defconfig ------------------- legacy,3730xm 0 min 51.2 sec: PASS omap3-beagle-xm 0 min 57.8 sec: PASS legacy,3530beagle 0 min 41.2 sec: PASS omap4-panda 1 min 5.9 sec: PASS omap3-tobi 0 min 33.8 sec: PASS am335x-bone 0 min 26.5 sec: PASS omap4-panda-es 1 min 8.0 sec: PASS legacy,3730storm 0 min 23.7 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.1 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 42.2 sec: FAIL imx6dl-wandboard,wand-solo 0 min 42.3 sec: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 21.4 sec: PASS armada-370-mirabox 0 min 19.6 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.2 sec: PASS multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 21.2 sec: FAIL armada-370-mirabox 0 min 18.6 sec: FAIL sun4i-a10-cubieboard 1 min 45.0 sec: FAIL sama5_defconfig --------------- sama5d35ek 0 min 17.9 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.5 sec: PASS da850-evm 0 min 40.8 sec: FAIL Console logs for failures ========================= imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.156 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-dual-LSxcYU/zImage tftp 0x18000000 192.168.1.2:tmp/wand-dual-LSxcYU/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-LSxcYU/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################### 1.5 MiB/s done Bytes transferred = 4207992 (403578 hex) => tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-dual-LSxcYU/imx6dl-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-dual-LSxcYU/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-LSxcYU/imx6dl-wandboard.dtb'. Load address: 0x1f000000 Loading: *## 1.4 MiB/s done Bytes transferred = 18975 (4a1f hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f007a1e Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.23 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' =>if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-solo-GXiVoz/zImage tftp 0x18000000 192.168.1.2:tmp/wand-solo-GXiVoz/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-GXiVoz/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################### 1.5 MiB/s done Bytes transferred = 4207992 (403578 hex) => tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-solo-GXiVoz/imx6dl-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-solo-GXiVoz/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-GXiVoz/imx6dl-wandboard.dtb'. Load address: 0x1f000000 Loading: *## 1.4 MiB/s done Bytes transferred = 18975 (4a1f hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f007a1e Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.34 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Switching to clocksource armada_370_xp_clocksource bounce pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) armada-xp-pinctrl d0018000.pinctrl: registered pinctrl driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 17) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 18) is a 16550A sata_mv d00a0000.sata: slots 32 ports 2 scsi0 : sata_mv scsi1 : sata_mv ata1: SATA max UDMA/133 irq 24 ata2: SATA max UDMA/133 irq 24 usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ata1: SATA link down (SStatus 0 SControl F300) ata2: SATA link down (SStatus 0 SControl F300) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.36 #1 [<c0013c0c>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0276480>] (panic+0xa0/0x1e8) [<c0276480>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02721dc>] (kernel_init+0x8/0x158) [<c02721dc>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.36 #1 [<c0013c0c>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c001238c>] (handle_IPI+0x108/0x130) [<c001238c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0359f70 to 0xc0359fb8) 9f60: c1d5c6d8 00000000 000000ba 000000ba 9f80: c03604a8 c0358000 c036045c c0383c6c c027deb0 c0358000 c0383c6c c0358000 9fa0: 0000001f c0359fb8 c000f070 c004fa8c 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004fa8c>] (cpu_startup_entry+0xfc/0x140) [<c004fa8c>] (cpu_startup_entry+0xfc/0x140) from [<c0328a3c>] (start_kernel+0x2c4/0x2d0) [<c0328a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 21.22 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket -1, mpidr 0 Setting up static identity map for 0xc027be58 - 0xc027beb0 unable to find compatible sirf rstc node in dtb Brought up 1 CPUs SMP: Total of 1 processors activated (1196.85 BogoMIPS). CPU: All CPU(s) started in SVC mode. pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations unable to find compatible sirf pwrc node in dtb irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated irq: Cannot allocate irq_descs @ IRQ70, assuming pre-allocated irq: Cannot allocate irq_descs @ IRQ103, assuming pre-allocated Initializing Coherency fabric Serial: AMBA PL011 UART driver bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Switching to clocksource armada_370_xp_clocksource Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) armada-370-pinctrl d0018000.pinctrl: registered pinctrl driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 17) is a 16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.36 #1 [<c0013c0c>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0276480>] (panic+0xa0/0x1e8) [<c0276480>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02721dc>] (kernel_init+0x8/0x158) [<c02721dc>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 18.61 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) .text : 0xc0008000 - 0xc0327ac0 (3199 kB) .init : 0xc0328000 - 0xc0356780 ( 186 kB) .data : 0xc0358000 - 0xc0383d20 ( 176 kB) .bss : 0xc0383d20 - 0xc03b68ac ( 203 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. NR_IRQS:16 nr_irqs:16 16 sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms Console: colour dummy device 80x30 Calibrating delay loop... 669.28 BogoMIPS (lpj=3346432) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket -1, mpidr 0 Setting up static identity map for 0xc027be58 - 0xc027beb0 unable to find compatible sirf rstc node in dtb Brought up 1 CPUs SMP: Total of 1 processors activated (669.28 BogoMIPS). CPU: All CPU(s) started in SVC mode. pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations unable to find compatible sirf pwrc node in dtb Serial: AMBA PL011 UART driver bio: create slab <bio-0> at 0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 bounce pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 104.96 seconds. # PYBOOT: Result: FAIL davinci_all_defconfig --------------------- da850-evm: FAIL: last 80 lines of boot log: ------------------------------------------- Starting SPI Memory Copy... Valid magicnum, 0x55424CBB, found at offset 0x00010000. DONE Jumping to entry point at 0xC1080000. MMC: davinci: 0 SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Net: DaVinci-EMAC Hit any key to stop autoboot: 3 0 U-Boot > U-Boot > version version U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913 U-Boot >setenv bootargs console=ttyS2,115200n8 debug earlyprintk setenv bootargs console=ttyS2,115200n8 debug earlyprintk U-Boot >if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot > if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot > setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot > dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.1.194 U-Boot > setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot > if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-xqp607/zImage-dtb-gNhknO tftp 0xc0800000 192.168.1.2:tmp/da850evm-xqp607/zImage-dtb-gNhknO Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-xqp607/zImage-dtb-gNhknO'. Load address: 0xc0800000 Loading: *################################################################# ################################################################# ######## 1.7 MiB/s done Bytes transferred = 2023756 (1ee14c hex) U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'buildroot.cpio.gz.uboot'. Load address: 0xc0c00000 Loading: *############################################ 1.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot >printenv bootargs printenv bootargs bootargs=console=ttyS2,115200n8 debug earlyprintk U-Boot > bootz 0xc0800000 0xc0c00000 bootz 0xc0800000 0xc0c00000 Kernel image @ 0xc0800000 [ 0x000000 - 0x1ec9f8 ] ## Loading init Ramdisk from Legacy Image at c0c00000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.83 seconds. # PYBOOT: Result: FAIL

9 years, 11 months

mainline boot: 48 pass, 1 fail (v3.15-rc3-82-g8aa9e85)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc3-82-g8aa9e85 Failed boot tests (console logs at the end) =========================================== sama5d35ek: FAIL: arm-sama5_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.9 sec: PASS da850-evm 0 min 15.7 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.3 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 54.8 sec: PASS am335x-boneblack 0 min 44.0 sec: PASS omap3-beagle-xm 0 min 59.0 sec: PASS legacy,3530beagle 0 min 35.7 sec: PASS (Warnings: 1) omap4-panda 1 min 5.3 sec: PASS omap3-overo-tobi 0 min 23.4 sec: PASS (Warnings: 1) am335x-bone 0 min 32.4 sec: PASS omap3-overo-storm-tobi 0 min 21.7 sec: PASS omap5-uevm 1 min 6.6 sec: PASS (Warnings: 1) omap3-n900 0 min 16.3 sec: PASS (Warnings: 1) legacy,n900 0 min 17.2 sec: PASS (Warnings: 1) omap4-panda-es 1 min 10.6 sec: PASS legacy,3730storm 0 min 23.2 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.6 sec: PASS imx6q-wandboard 0 min 17.1 sec: PASS arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 16.8 sec: PASS ste-snowball 1 min 18.0 sec: PASS tegra30-beaver 0 min 24.4 sec: PASS am335x-boneblack 0 min 37.6 sec: PASS omap3-beagle-xm 0 min 52.8 sec: PASS sun7i-a20-cubieboard2 0 min 12.5 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 53.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS sun4i-a10-cubieboard 0 min 19.2 sec: PASS bcm28155-ap 0 min 26.5 sec: PASS omap3-overo-tobi 0 min 22.4 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.4 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 23.7 sec: PASS omap5-uevm 1 min 36.7 sec: PASS (Warnings: 1) omap3-n900 0 min 15.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.6 sec: PASS omap4-panda-es 0 min 54.7 sec: PASS imx6dl-wandboard,wand-dual 0 min 17.9 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 12.9 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.1 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.0 sec: PASS exynos5250-arndale 0 min 30.4 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 31.1 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 1 min 43.3 sec: FAIL Console logs for failures ========================= arm-sama5_defconfig ------------------- sama5d35ek: FAIL: last 80 lines of boot log: -------------------------------------------- atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read 64 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f1a4>] (ubi_io_read_ec_hdr+0x44/0x1e8) [<c023f1a4>] (ubi_io_read_ec_hdr) from [<c02438e0>] (scan_all.constprop.8+0xb8/0x950) [<c02438e0>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read 2048 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f390>] (ubi_io_read_vid_hdr+0x48/0x208) [<c023f390>] (ubi_io_read_vid_hdr) from [<c0243980>] (scan_all.constprop.8+0x158/0x950) [<c0243980>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read 64 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f1a4>] (ubi_io_read_ec_hdr+0x44/0x1e8) [<c023f1a4>] (ubi_io_read_ec_hdr) from [<c02438e0>] (scan_all.constprop.8+0xb8/0x950) [<c02438e0>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read 2048 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f390>] (ubi_io_read_vid_hdr+0x48/0x208) [<c023f390>] (ubi_io_read_vid_hdr) from [<c0243980>] (scan_all.constprop.8+0x158/0x950) [<c0243980>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 103.28 seconds. # PYBOOT: Result: FAIL

9 years, 11 months

mainline boot: 27 passed 4 failed (mainline/v3.15-rc3-82-g8aa9e85)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.04 panda multi_v7_defconfig : FAILED 1:38.12 snowball multi_v7_defconfig : FAILED 1:10.80 wandboard imx_v6_v7_defconfig : FAILED 1:15.00 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.16 arndale exynos_defconfig : passed 1:13.08 bbb omap2plus_defconfig : passed 1:36.12 beaver tegra_defconfig : passed 0:59.81 beaver multi_v7_defconfig : passed 0:52.47 capri bcm_defconfig : passed 0:43.61 capri multi_v7_defconfig : passed 0:44.62 cubie sunxi_defconfig : passed 1:00.43 cubie multi_v7_defconfig : passed 1:09.95 cubie2 multi_v7_defconfig : passed 1:10.25 cubie2 multi_lpae_defconfig : passed 0:55.94 dalmore tegra_defconfig : passed 1:18.67 dalmore multi_v7_defconfig : passed 1:14.55 dalmore multi_lpae_defconfig : passed 1:18.74 hummingboard imx_v6_v7_defconfig : passed 1:27.99 hummingboard multi_v7_defconfig : passed 1:19.23 omap5uevm omap2plus_defconfig : warnings 0:56.55 omap5uevm multi_v7_defconfig : warnings 1:49.18 omap5uevm multi_lpae_defconfig : warnings 1:39.65 panda omap2plus_defconfig : warnings 1:11.93 seaboard tegra_defconfig : passed 1:58.97 seaboard multi_v7_defconfig : passed 1:02.28 snow exynos_defconfig : passed 1:27.97 snowball u8500_defconfig : passed 2:04.39 trimslice tegra_defconfig : passed 0:57.64 trimslice multi_v7_defconfig : passed 1:03.69 wandboard multi_v7_defconfig : passed 0:57.96 Offline boards: bbb multi_v7_defconfig : OFFLINE 0:47.79 sama5 sama5_defconfig : OFFLINE 1:52.29 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017697] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017723] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017736] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017756] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017768] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018707] Switched to clocksource arch_sys_counter [ 0.025834] NET: Registered protocol family 2 [ 0.026299] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026386] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026506] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026590] TCP: reno registered [ 0.026604] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026660] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026863] NET: Registered protocol family 1 [ 0.027249] RPC: Registered named UNIX socket transport module. [ 0.027267] RPC: Registered udp transport module. [ 0.027272] RPC: Registered tcp transport module. [ 0.027278] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028254] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028819] bounce pool size: 64 pages [ 0.036553] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036570] io scheduler noop registered [ 0.036577] io scheduler deadline registered [ 0.036763] io scheduler cfq registered (default) [ 0.038418] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080603] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083034] console [ttyS0] disabled [ 0.103227] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618740] console [ttyS0] enabled [ 0.623458] mousedev: PS/2 mouse device common for all mice [ 0.629334] i2c /dev entries driver [ 0.634139] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.643132] TCP: cubic registered [ 0.646452] NET: Registered protocol family 17 [ 0.651013] Registering SWP/SWPB emulation handler [ 0.656731] ahci-5v: 5000 mV [ 0.660019] usb1-vbus: 5000 mV [ 0.663365] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.624603] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.632293] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.639190] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.647094] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.653991] usbcore: registered new interface driver usbhid [ 1.659851] usbhid: USB HID core driver [ 1.667877] TCP: cubic registered [ 1.671356] NET: Registered protocol family 17 [ 1.676239] Key type dns_resolver registered [ 1.681213] Power Management for TI OMAP4+ devices. [ 1.686370] Power Management for TI OMAP4. [ 1.690673] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.697814] ThumbEE CPU extension supported. [ 1.702545] Registering SWP/SWPB emulation handler [ 1.708282] vwl1271: 1800 mV [ 1.712738] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.722686] twl 0-0048: PIH (irq 39) nested IRQs [ 1.728393] twl_rtc rtc.15: Power up reset detected. [ 1.734771] twl_rtc rtc.15: Enabling TWL-RTC [ 1.741851] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.748687] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.754791] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.760925] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.767028] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.772552] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.778015] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.783477] VDAC: 1800 mV [ 1.783477] VANA: 2100 mV [ 1.790374] VCXIO: 1800 mV [ 1.790374] VUSB: 3300 mV [ 1.797302] V1V8: 1800 mV [ 1.800872] V2V1: 2100 mV [ 1.879364] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.049774] hub 1-1:1.0: USB hub found [ 2.054046] hub 1-1:1.0: 5 ports detected [ 2.643676] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.898925] smsc95xx v1.0.4 [ 4.706207] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 3a:ce:08:d5:bd:e9 ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.106 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-Kb8NAj/tmpSuF97w-uImage tftp 0x01000000 tmp/snowball-Kb8NAj/tmpSuF97w-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'tmp/snowball-Kb8NAj/tmpSuF97w-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690561 (479281 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690497 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- r6:edc682e0 r5:edc682e0 r4:edc8f8a0 [<800eb9d0>] (lookup_real) from [<800ec770>] (__lookup_hash+0x40/0x48) r5:edc682e0 r4:00000011 [<800ec730>] (__lookup_hash) from [<800ed19c>] (lookup_slow+0x44/0xb0) r5:edb99e18 r4:edb99ed0 [<800ed158>] (lookup_slow) from [<800ee074>] (link_path_walk+0x764/0x818) r7:ee27f01e r6:edb99e18 r5:edb99e20 r4:edb99ed0 [<800ed910>] (link_path_walk) from [<800f0814>] (path_openat+0x94/0x628) r10:edb98000 r9:00000000 r8:00000000 r7:ee27f000 r6:edb99f5c r5:edb99ed0 r4:ed4fd180 [<800f0780>] (path_openat) from [<800f1d78>] (do_filp_open+0x34/0x88) r10:00000000 r9:edb98000 r8:8000eb04 r7:ffffff9c r6:ee27f000 r5:00000001 r4:edb99f5c [<800f1d44>] (do_filp_open) from [<800e2674>] (do_sys_open+0x104/0x1d4) r7:00000003 r6:ffffff9c r5:ee27f000 r4:00020000 [<800e2570>] (do_sys_open) from [<800e2768>] (SyS_open+0x24/0x28) r9:edb98000 r8:8000eb04 r7:00000005 r6:7e9ad0d4 r5:786725a0 r4:78672798 [<800e2744>] (SyS_open) from [<8000e940>] (ret_fast_syscall+0x0/0x48) Code: e3a0000b e1a01005 eb061da3 eaffff88 (e7f001f2) ---[ end trace 9571d1abf6c75e4c ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m Debian GNU/Linux 7.0 wandboard ttymxc0 wandboard login: root root Password: root Last login: Thu Jan 1 00:00:17 UTC 1970 on ttymxc0 Linux wandboard 3.15.0-rc3+ #1 SMP Wed Apr 30 09:03:19 PDT 2014 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. ~$off # PYBOOT: Exception: timeout

9 years, 11 months

mainline build: 7 warnings 0 failures (mainline/v3.15-rc3-82-g8aa9e85)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 8aa9e85 ARC: !PREEMPT: Ensure Return to kernel mode is IRQ safe Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc3-82-g8aa9e85/ Runtime: 41m 7s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

9 years, 11 months

next boot: 48 pass, 1 fail (next-20140430)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140430 Failed boot tests (console logs at the end) =========================================== sama5d35ek: FAIL: arm-sama5_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.8 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.7 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 52.2 sec: PASS am335x-boneblack 0 min 39.1 sec: PASS omap3-beagle-xm 1 min 1.2 sec: PASS legacy,3530beagle 0 min 35.4 sec: PASS (Warnings: 1) omap4-panda 1 min 15.2 sec: PASS omap3-overo-tobi 0 min 22.5 sec: PASS (Warnings: 1) am335x-bone 0 min 32.1 sec: PASS omap3-overo-storm-tobi 0 min 24.7 sec: PASS omap5-uevm 1 min 5.7 sec: PASS (Warnings: 1) omap3-n900 0 min 16.4 sec: PASS (Warnings: 1) legacy,n900 0 min 16.2 sec: PASS (Warnings: 1) omap4-panda-es 1 min 8.2 sec: PASS legacy,3730storm 0 min 19.5 sec: PASS legacy,3530overo 0 min 20.5 sec: PASS (Warnings: 1) arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 16.5 sec: PASS ste-snowball 1 min 17.9 sec: PASS tegra30-beaver 0 min 20.6 sec: PASS am335x-boneblack 0 min 37.6 sec: PASS omap3-beagle-xm 0 min 50.5 sec: PASS sun7i-a20-cubieboard2 0 min 12.4 sec: PASS armada-370-mirabox 0 min 22.6 sec: PASS omap4-panda 1 min 2.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.5 sec: PASS sun4i-a10-cubieboard 0 min 14.5 sec: PASS bcm28155-ap 0 min 28.1 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap5-uevm 1 min 39.7 sec: PASS (Warnings: 1) omap3-n900 0 min 16.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.0 sec: PASS omap4-panda-es 0 min 56.7 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.3 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 12.9 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.3 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.3 sec: PASS exynos5250-arndale 0 min 29.9 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 34.0 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS armada-370-mirabox 0 min 20.5 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 2 min 8.2 sec: FAIL Console logs for failures ========================= arm-sama5_defconfig ------------------- sama5d35ek: FAIL: last 80 lines of boot log: -------------------------------------------- [<c023a030>] (ubi_attach_mtd_dev) from [<c0560f0c>] (ubi_init+0x1f0/0x2c0) [<c0560f0c>] (ubi_init) from [<c00087e0>] (do_one_initcall+0x80/0x1b8) [<c00087e0>] (do_one_initcall) from [<c054cc54>] (kernel_init_freeable+0xe8/0x1b0) [<c054cc54>] (kernel_init_freeable) from [<c03ef734>] (kernel_init+0x8/0xec) [<c03ef734>] (kernel_init) from [<c000e4f8>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 330:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 330:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 330:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 330:2048, read 2048 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3-next-20140430 #1 [<c00128d0>] (unwind_backtrace) from [<c00108ec>] (show_stack+0x10/0x14) [<c00108ec>] (show_stack) from [<c023efd4>] (ubi_io_read+0x124/0x2e8) [<c023efd4>] (ubi_io_read) from [<c023f588>] (ubi_io_read_vid_hdr+0x48/0x208) [<c023f588>] (ubi_io_read_vid_hdr) from [<c0243b78>] (scan_all.constprop.5+0x158/0x950) [<c0243b78>] (scan_all.constprop.5) from [<c0244624>] (ubi_attach+0x8c/0x144) [<c0244624>] (ubi_attach) from [<c023a030>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c023a030>] (ubi_attach_mtd_dev) from [<c0560f0c>] (ubi_init+0x1f0/0x2c0) [<c0560f0c>] (ubi_init) from [<c00087e0>] (do_one_initcall+0x80/0x1b8) [<c00087e0>] (do_one_initcall) from [<c054cc54>] (kernel_init_freeable+0xe8/0x1b0) [<c054cc54>] (kernel_init_freeable) from [<c03ef734>] (kernel_init+0x8/0xec) [<c03ef734>] (kernel_init) from [<c000e4f8>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 331:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 331:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 331:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 331:0, read 64 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3-next-20140430 #1 [<c00128d0>] (unwind_backtrace) from [<c00108ec>] (show_stack+0x10/0x14) [<c00108ec>] (show_stack) from [<c023efd4>] (ubi_io_read+0x124/0x2e8) [<c023efd4>] (ubi_io_read) from [<c023f39c>] (ubi_io_read_ec_hdr+0x44/0x1e8) [<c023f39c>] (ubi_io_read_ec_hdr) from [<c0243ad8>] (scan_all.constprop.5+0xb8/0x950) [<c0243ad8>] (scan_all.constprop.5) from [<c0244624>] (ubi_attach+0x8c/0x144) [<c0244624>] (ubi_attach) from [<c023a030>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c023a030>] (ubi_attach_mtd_dev) from [<c0560f0c>] (ubi_init+0x1f0/0x2c0) [<c0560f0c>] (ubi_init) from [<c00087e0>] (do_one_initcall+0x80/0x1b8) [<c00087e0>] (do_one_initcall) from [<c054cc54>] (kernel_init_freeable+0xe8/0x1b0) [<c054cc54>] (kernel_init_freeable) from [<c03ef734>] (kernel_init+0x8/0xec) [<c03ef734>] (kernel_init) from [<c000e4f8>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 331:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 331:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 331:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 331:2048, read 2048 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3-next-20140430 #1 [<c00128d0>] (unwind_backtrace) from [<c00108ec>] (show_stack+0x10/0x14) [<c00108ec>] (show_stack) from [<c023efd4>] (ubi_io_read+0x124/0x2e8) [<c023efd4>] (ubi_io_read) from [<c023f588>] (ubi_io_read_vid_hdr+0x48/0x208) [<c023f588>] (ubi_io_read_vid_hdr) from [<c0243b78>] (scan_all.constprop.5+0x158/0x950) [<c0243b78>] (scan_all.constprop.5) from [<c0244624>] (ubi_attach+0x8c/0x144) [<c0244624>] (ubi_attach) from [<c023a030>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c023a030>] (ubi_attach_mtd_dev) from [<c0560f0c>] (ubi_init+0x1f0/0x2c0) [<c0560f0c>] (ubi_init) from [<c00087e0>] (do_one_initcall+0x80/0x1b8) [<c00087e0>] (do_one_initcall) from [<c054cc54>] (kernel_init_freeable+0xe8/0x1b0) [<c054cc54>] (kernel_init_freeable) from [<c03ef734>] (kernel_init+0x8/0xec) [<c03ef734>] (kernel_init) from [<c000e4f8>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 332:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 332:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 332:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 332:0, read 64 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3-next-20140430 #1 [<c00128d0>] (unwind_backtrace) from [<c00108ec>] (show_stack+0x10/0x14) [<c00108ec>] (show_stack) from [<c023efd4>] (ubi_io_read+0x124/0x2e8) [<c023efd4>] (ubi_io_read) from [<c023f3~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 128.23 seconds. # PYBOOT: Result: FAIL

9 years, 11 months

next boot: 30 passed 3 failed (next/next-20140430)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:20.95 panda multi_v7_defconfig : FAILED 3:08.38 snowball multi_v7_defconfig : FAILED 1:10.36 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.21 arndale exynos_defconfig : passed 1:06.52 bbb omap2plus_defconfig : passed 1:26.50 bbb multi_v7_defconfig : passed 1:16.23 beaver tegra_defconfig : passed 1:12.52 beaver multi_v7_defconfig : passed 0:53.74 capri bcm_defconfig : passed 0:45.78 capri multi_v7_defconfig : passed 0:44.38 cubie sunxi_defconfig : passed 0:52.88 cubie multi_v7_defconfig : passed 0:58.96 cubie2 multi_v7_defconfig : passed 1:06.96 cubie2 multi_lpae_defconfig : passed 1:11.75 dalmore tegra_defconfig : passed 1:58.14 dalmore multi_v7_defconfig : passed 1:16.57 dalmore multi_lpae_defconfig : passed 1:16.01 hummingboard imx_v6_v7_defconfig : passed 1:19.46 hummingboard multi_v7_defconfig : passed 1:13.43 omap5uevm omap2plus_defconfig : warnings 1:13.66 omap5uevm multi_v7_defconfig : warnings 1:54.28 omap5uevm multi_lpae_defconfig : warnings 1:42.87 panda omap2plus_defconfig : warnings 1:14.43 sama5 sama5_defconfig : passed 1:52.31 seaboard tegra_defconfig : passed 1:04.70 seaboard multi_v7_defconfig : passed 1:08.44 snow exynos_defconfig : passed 1:27.41 snowball u8500_defconfig : passed 1:51.25 trimslice tegra_defconfig : passed 0:57.47 trimslice multi_v7_defconfig : passed 1:02.92 wandboard imx_v6_v7_defconfig : passed 0:52.96 wandboard multi_v7_defconfig : passed 0:55.59 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.018343] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.018367] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.018380] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.018398] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.018412] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.019451] Switched to clocksource arch_sys_counter [ 0.026714] NET: Registered protocol family 2 [ 0.027181] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.027271] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.027393] TCP: Hash tables configured (established 8192 bind 8192) [ 0.027479] TCP: reno registered [ 0.027493] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.027549] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.027767] NET: Registered protocol family 1 [ 0.028178] RPC: Registered named UNIX socket transport module. [ 0.028190] RPC: Registered udp transport module. [ 0.028196] RPC: Registered tcp transport module. [ 0.028203] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.029272] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.029943] bounce: pool size: 64 pages [ 0.037847] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.037872] io scheduler noop registered [ 0.037884] io scheduler deadline registered [ 0.038070] io scheduler cfq registered (default) [ 0.039817] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.082109] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.084595] console [ttyS0] disabled [ 0.104791] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.620218] console [ttyS0] enabled [ 0.625005] mousedev: PS/2 mouse device common for all mice [ 0.630913] i2c /dev entries driver [ 0.635762] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.644923] TCP: cubic registered [ 0.648249] NET: Registered protocol family 17 [ 0.652834] Registering SWP/SWPB emulation handler [ 0.658622] ahci-5v: 5000 mV [ 0.661923] usb1-vbus: 5000 mV [ 0.665291] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.770263] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.775817] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.781249] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.786773] VDAC: 1800 mV [ 1.786773] VANA: 2100 mV [ 1.793609] VCXIO: 1800 mV [ 1.796905] VUSB: 3300 mV [ 1.800598] V1V8: 1800 mV [ 1.804199] V2V1: 2100 mV [ 1.891998] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.023590] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.031127] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.040069] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.047546] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.054504] hub 1-1:1.0: USB hub found [ 2.058563] hub 1-1:1.0: 5 ports detected [ 2.063720] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.234771] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.249084] ALSA device list: [ 2.252288] No soundcards found. [ 2.252655] Waiting for root device /dev/mmcblk0p2... [ 2.279724] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.290161] mmc0: new high speed SDHC card at address b368 [ 2.296325] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.302520] mmcblk0: p1 p2 [ 2.310577] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.328948] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.335754] mmc1: new SDIO card at address 0001 [ 2.351837] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.378112] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.387634] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 2.412017] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.412017] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.438110] devtmpfs: mounted [ 2.439056] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 2.465148] smsc95xx v1.0.4 [ 2.526428] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, fe:52:05:b9:84:bf INIT: version 2.88 booting ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.106 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-Flfnhj/tmpHjQ6Dh-uImage tftp 0x01000000 tmp/snowball-Flfnhj/tmpHjQ6Dh-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'tmp/snowball-Flfnhj/tmpHjQ6Dh-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4702105 (47bf99 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4702041 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

9 years, 11 months

next build: 235 warnings 0 failures (next/next-20140430)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 5337aa0 Add linux-next specific files for 20140430 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140430/ Runtime: 40m 49s Passed: 124 Failed: 0 Warnings: 235 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 6 include/linux/bitops.h:48) [-Wdeprecated-declarations] 111 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

9 years, 11 months

mainline boot: 48 pass, 1 fail (v3.15-rc3-62-ged8c37e)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc3-62-ged8c37e Failed boot tests (console logs at the end) =========================================== sama5d35ek: FAIL: arm-sama5_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.6 sec: PASS da850-evm 0 min 15.6 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.5 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 51.9 sec: PASS am335x-boneblack 0 min 44.2 sec: PASS omap3-beagle-xm 1 min 5.9 sec: PASS legacy,3530beagle 0 min 36.0 sec: PASS (Warnings: 1) omap4-panda 1 min 14.5 sec: PASS omap3-overo-tobi 0 min 23.7 sec: PASS (Warnings: 1) am335x-bone 0 min 27.5 sec: PASS omap3-overo-storm-tobi 0 min 21.9 sec: PASS omap5-uevm 1 min 5.4 sec: PASS (Warnings: 1) omap3-n900 0 min 17.4 sec: PASS (Warnings: 1) legacy,n900 0 min 16.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 9.8 sec: PASS legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 24.6 sec: PASS (Warnings: 1) arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.8 sec: PASS imx6q-wandboard 0 min 17.4 sec: PASS arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 16.9 sec: PASS ste-snowball 1 min 21.0 sec: PASS tegra30-beaver 0 min 19.5 sec: PASS am335x-boneblack 0 min 37.6 sec: PASS omap3-beagle-xm 0 min 53.7 sec: PASS sun7i-a20-cubieboard2 0 min 12.4 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 55.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.5 sec: PASS sun4i-a10-cubieboard 0 min 14.5 sec: PASS bcm28155-ap 0 min 27.7 sec: PASS omap3-overo-tobi 0 min 22.4 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.7 sec: PASS omap3-overo-storm-tobi 0 min 23.7 sec: PASS omap5-uevm 1 min 40.3 sec: PASS (Warnings: 1) omap3-n900 0 min 16.2 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.1 sec: PASS omap4-panda-es 0 min 49.5 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 32.8 sec: PASS sun4i-a10-cubieboard 0 min 17.8 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.7 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.8 sec: PASS exynos5250-arndale 0 min 29.7 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 31.7 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 1 min 43.3 sec: FAIL Console logs for failures ========================= arm-sama5_defconfig ------------------- sama5d35ek: FAIL: last 80 lines of boot log: -------------------------------------------- UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read 64 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f1a4>] (ubi_io_read_ec_hdr+0x44/0x1e8) [<c023f1a4>] (ubi_io_read_ec_hdr) from [<c02438e0>] (scan_all.constprop.8+0xb8/0x950) [<c02438e0>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read 2048 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f390>] (ubi_io_read_vid_hdr+0x48/0x208) [<c023f390>] (ubi_io_read_vid_hdr) from [<c0243980>] (scan_all.constprop.8+0x158/0x950) [<c0243980>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read 64 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f1a4>] (ubi_io_read_ec_hdr+0x44/0x1e8) [<c023f1a4>] (ubi_io_read_ec_hdr) from [<c02438e0>] (scan_all.constprop.8+0xb8/0x950) [<c02438e0>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read 2048 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f390>] (ubi_io_read_vid_hdr+0x48/0x208) [<c023f390>] (ubi_io_read_vid_hdr) from [<c0243980>] (scan_all.constprop.8+0x158/0x950) [<c0243980>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0x~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 103.27 seconds. # PYBOOT: Result: FAIL

9 years, 11 months

mainline boot: 30 passed 2 failed (mainline/v3.15-rc3-62-ged8c37e)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:20.94 snowball multi_v7_defconfig : FAILED 1:12.62 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.28 arndale exynos_defconfig : passed 1:07.96 bbb omap2plus_defconfig : passed 1:37.37 bbb multi_v7_defconfig : passed 1:22.69 beaver tegra_defconfig : passed 0:53.56 beaver multi_v7_defconfig : passed 0:50.64 capri bcm_defconfig : passed 0:44.83 capri multi_v7_defconfig : passed 0:45.35 cubie sunxi_defconfig : passed 1:10.26 cubie multi_v7_defconfig : passed 1:05.75 cubie2 multi_v7_defconfig : passed 1:08.08 cubie2 multi_lpae_defconfig : passed 0:53.02 dalmore tegra_defconfig : passed 1:24.17 dalmore multi_v7_defconfig : passed 1:18.68 dalmore multi_lpae_defconfig : passed 1:17.77 hummingboard imx_v6_v7_defconfig : passed 1:21.51 hummingboard multi_v7_defconfig : passed 1:08.14 omap5uevm multi_v7_defconfig : warnings 1:41.18 omap5uevm multi_lpae_defconfig : warnings 1:38.78 panda omap2plus_defconfig : warnings 1:14.62 panda multi_v7_defconfig : passed 2:02.20 sama5 sama5_defconfig : passed 1:54.79 seaboard tegra_defconfig : passed 1:06.91 seaboard multi_v7_defconfig : passed 1:09.29 snow exynos_defconfig : passed 1:33.77 snowball u8500_defconfig : passed 2:11.10 trimslice tegra_defconfig : passed 0:58.27 trimslice multi_v7_defconfig : passed 1:09.51 wandboard imx_v6_v7_defconfig : passed 0:58.56 wandboard multi_v7_defconfig : passed 0:58.61 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:20.56 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017720] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017744] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017759] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017779] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017792] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018735] Switched to clocksource arch_sys_counter [ 0.025872] NET: Registered protocol family 2 [ 0.026337] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026424] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026545] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026629] TCP: reno registered [ 0.026644] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026700] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026905] NET: Registered protocol family 1 [ 0.027299] RPC: Registered named UNIX socket transport module. [ 0.027314] RPC: Registered udp transport module. [ 0.027320] RPC: Registered tcp transport module. [ 0.027326] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028288] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028847] bounce pool size: 64 pages [ 0.036591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036608] io scheduler noop registered [ 0.036615] io scheduler deadline registered [ 0.036800] io scheduler cfq registered (default) [ 0.038450] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080643] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083066] console [ttyS0] disabled [ 0.103262] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618766] console [ttyS0] enabled [ 0.623492] mousedev: PS/2 mouse device common for all mice [ 0.629369] i2c /dev entries driver [ 0.634172] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.643160] TCP: cubic registered [ 0.646480] NET: Registered protocol family 17 [ 0.651038] Registering SWP/SWPB emulation handler [ 0.656767] ahci-5v: 5000 mV [ 0.660051] usb1-vbus: 5000 mV [ 0.663410] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.106 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-cUW2b7/tmpaI2mW9-uImage tftp 0x01000000 tmp/snowball-cUW2b7/tmpaI2mW9-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'tmp/snowball-cUW2b7/tmpaI2mW9-uImage'. Load address: 0x1000000 Loading: *#############T #################################################### ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690585 (479299 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690521 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

9 years, 11 months

mainline build: 7 warnings 0 failures (mainline/v3.15-rc3-62-ged8c37e)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: ed8c37e Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc3-62-ged8c37e/ Runtime: 41m 48s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

9 years, 11 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports April 2014