Re: [Linaro-uefi] [PATCH v4 2/5] Drivers/Usb/DwUsb: support designware usb

On Thu, Mar 02, 2017 at 09:39:07AM +0800, Haojian Zhuang wrote:

On 2017/3/1 22:32, Leif Lindholm wrote:

...

Hi Haojian,

I have not had any reply to my email on my comment on v3: https://lists.linaro.org/pipermail/linaro-uefi/2017-February/003930.html where I point out that I have had no reply to my comment on v2: https://lists.linaro.org/pipermail/linaro-uefi/2017-February/003886.html

And none of the points I raise there appear to have been addressed.

Actually I already applied those comments. But I don't have the DwUSB spec. My document only covers a few register definitions. I have to leave some hard code values since I don't know the definitions too.

OK, I noticed that the first few comments had not been addressed and assumed it applied throughout.

This is why it is useful to respond to review feedback rather than just submitting a new revision.

With that in mind...

...

On Wed, Feb 15, 2017 at 10:54:56PM +0800, Haojian Zhuang wrote:

...

Support Designware USB controller.

Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Haojian Zhuang haojian.zhuang@linaro.org

---

Drivers/Usb/DwUsbDxe/DwUsbDxe.c | 861 ++++++++++++++++++++++++++++++++++++++ Drivers/Usb/DwUsbDxe/DwUsbDxe.dec | 45 ++ Drivers/Usb/DwUsbDxe/DwUsbDxe.h | 641 ++++++++++++++++++++++++++++ Drivers/Usb/DwUsbDxe/DwUsbDxe.inf | 52 +++ Include/Protocol/DwUsb.h | 81 ++++ 5 files changed, 1680 insertions(+) create mode 100644 Drivers/Usb/DwUsbDxe/DwUsbDxe.c create mode 100644 Drivers/Usb/DwUsbDxe/DwUsbDxe.dec create mode 100644 Drivers/Usb/DwUsbDxe/DwUsbDxe.h create mode 100644 Drivers/Usb/DwUsbDxe/DwUsbDxe.inf create mode 100644 Include/Protocol/DwUsb.h

diff --git a/Drivers/Usb/DwUsbDxe/DwUsbDxe.c b/Drivers/Usb/DwUsbDxe/DwUsbDxe.c new file mode 100644 index 0000000..13b85b1 --- /dev/null +++ b/Drivers/Usb/DwUsbDxe/DwUsbDxe.c @@ -0,0 +1,861 @@ +/** @file

• Copyright (c) 2015-2017, Linaro. All rights reserved.
• This program and the accompanying materials
• are licensed and made available under the terms and conditions of the BSD License
• which accompanies this distribution. The full text of the license may be found at
• http://opensource.org/licenses/bsd-license.php
• THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
• WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

+**/

+#include <IndustryStandard/Usb.h> +#include <Library/ArmLib.h> +#include <Library/BaseLib.h> +#include <Library/BaseMemoryLib.h> +#include <Library/CacheMaintenanceLib.h> +#include <Library/DebugLib.h> +#include <Library/IoLib.h> +#include <Library/MemoryAllocationLib.h> +#include <Library/TimerLib.h> +#include <Library/UefiBootServicesTableLib.h> +#include <Library/UefiDriverEntryPoint.h> +#include <Library/UefiRuntimeServicesTableLib.h> +#include <Library/UncachedMemoryAllocationLib.h> +#include <Protocol/DwUsb.h> +#include <Protocol/UsbDevice.h>

+#include "DwUsbDxe.h"

+#define USB_TYPE_LENGTH 16 +#define USB_BLOCK_HIGH_SPEED_SIZE 512 +#define DATA_SIZE 32768 +#define CMD_SIZE 512 +#define MATCH_CMD_LITERAL(Cmd, Buf) (!AsciiStrnCmp (Cmd, Buf, sizeof (Cmd) - 1))

For example, this one is not a hard-coded value, and yet my comment was not addressed.

OK, I'm not going to go through and point out which bits have been addressed or not.

Please go back to my reply from 7 February and respond to the comments I make in there. We can have a discussion about items you don't think it is correct or realistic to address in the way I suggest, or where you do not understand my comments.

/ Leif

...

...

+// The time between interrupt polls, in units of 100 nanoseconds +// 10 Microseconds +#define DW_INTERRUPT_POLL_PERIOD 10000

+#define ENDPOINT0 0 +#define ENDPOINT1 1

+#define DIR_OUT 0 +#define DIR_IN 1

+#define DWUSB_BUFFER_PAGE_NUM 16

+#define DESCRIPTOR_INDEX_LANG 0 +#define DESCRIPTOR_INDEX_MANUFACTURER 1 +#define DESCRIPTOR_INDEX_PRODUCT 2 +#define DESCRIPTOR_INDEX_SERIALNUMBER 3

+#define DESCRIPTOR_TYPE(x) (((x) >> 8) & 0xFF) +#define DESCRIPTOR_INDEX(x) ((x) & 0xFF)

+typedef struct {

• USB_DEVICE_DESCRIPTOR *DeviceDescriptor;
• USB_CONFIG_DESCRIPTOR *ConfigDescriptor;

+} DW_USB_DESCRIPTOR;

+EFI_GUID gDwUsbProtocolGuid = DW_USB_PROTOCOL_GUID;

+STATIC DwUsbDevDmaDesc *gDmaDesc,*gDmaDescEp0,*gDmaDescIn; +STATIC USB_DEVICE_REQUEST *gCtrlReq; +STATIC VOID *RxBuf; +STATIC UINTN RxDescBytes; +STATIC UINTN mNumDataBytes;

+STATIC DW_USB_PROTOCOL *DwUsb; +STATIC DW_USB_DESCRIPTOR gDwUsbDescriptor;

+STATIC USB_DEVICE_RX_CALLBACK mDataReceivedCallback; +STATIC USB_DEVICE_TX_CALLBACK mDataSentCallback;

+/* To detect which mode was run, high speed or full speed */ +STATIC +UINTN +UsbDrvPortSpeed (

• VOID
• )

+{

• return (((READ_REG32 (DSTS) & DSTS_ENUMSPD_MASK) == DSTS_ENUMSPD_HIGH));

+}

+STATIC +VOID +ResetEndpoints (

• VOID
• )

+{

• UINT32 Data;
• /* EP0 IN ACTIVE NEXT=1 */
• WRITE_REG32 (DIEPCTL0, DXEPCTL_USBACTEP | BIT11);
• /* EP0 OUT ACTIVE */
• WRITE_REG32 (DOEPCTL0, DXEPCTL_USBACTEP);
• /* Clear any pending OTG Interrupts */
• WRITE_REG32 (GOTGINT, ~0);
• /* Clear any pending interrupts */
• WRITE_REG32 (GINTSTS, ~0);
• WRITE_REG32 (DIEPINT0, ~0);
• WRITE_REG32 (DOEPINT0, ~0);
• WRITE_REG32 (DIEPINT1, ~0);
• WRITE_REG32 (DOEPINT1, ~0);
• /* IN EP interrupt mask */
• WRITE_REG32 (DIEPMSK, DXEPMSK_TIMEOUTMSK | DXEPMSK_AHBERMSK | DXEPMSK_XFERCOMPLMSK);
• /* OUT EP interrupt mask */
• WRITE_REG32 (DOEPMSK, DXEPMSK_TIMEOUTMSK | DXEPMSK_AHBERMSK | DXEPMSK_XFERCOMPLMSK);
• /* Enable interrupts on EndPoint0 */
• WRITE_REG32 (DAINTMSK, (1 << DAINTMSK_OUTEPMSK_SHIFT) | (1 << DAINTMSK_INEPMSK_SHIFT));
• /* EP0 OUT Transfer Size:64 Bytes, 1 Packet, 3 Setup Packet, Read to receive setup packet*/
• WRITE_REG32 (DOEPTSIZ0, DXEPTSIZ_SUPCNT(3) | DXEPTSIZ_PKTCNT(1) | DXEPTSIZ_XFERSIZE(64));
• //notes that:the compulsive conversion is expectable.
• gDmaDescEp0->status.b.bs = 0x3;
• gDmaDescEp0->status.b.mtrf = 0;
• gDmaDescEp0->status.b.sr = 0;
• gDmaDescEp0->status.b.l = 1;
• gDmaDescEp0->status.b.ioc = 1;
• gDmaDescEp0->status.b.sp = 0;
• gDmaDescEp0->status.b.bytes = 64;
• gDmaDescEp0->buf = (UINT32)(UINTN)gCtrlReq;
• gDmaDescEp0->status.b.sts = 0;
• gDmaDescEp0->status.b.bs = 0x0;
• WRITE_REG32 (DOEPDMA0, (UINT32)(UINTN)gDmaDescEp0);
• /* EP0 OUT ENABLE CLEARNAK */
• Data = READ_REG32 (DOEPCTL0);
• WRITE_REG32 (DOEPCTL0, Data | DXEPCTL_EPENA | DXEPCTL_CNAK);

+}

+STATIC +VOID +EndPointTx (

• IN UINT8 EndPoint,
• IN CONST VOID *Ptr,
• IN UINTN Len
• )

+{

• UINT32 BlockSize;
• UINT32 Packets;
• UINT32 Data;
• /* EPx OUT ACTIVE */
• Data = READ_REG32 (DIEPCTL (EndPoint));
• WRITE_REG32 (DIEPCTL (EndPoint), Data | DXEPCTL_USBACTEP);
• if (!EndPoint) {

•  BlockSize = 64;
  

• } else {

•  BlockSize = UsbDrvPortSpeed () ? USB_BLOCK_HIGH_SPEED_SIZE : 64;
  

• }
• Packets = (Len + BlockSize - 1) / BlockSize;
• if (!Len) {
• /* send one empty packet */
• gDmaDescIn->status.b.bs = 0x3;
• gDmaDescIn->status.b.l = 1;
• gDmaDescIn->status.b.ioc = 1;
• gDmaDescIn->status.b.sp = 1;
• gDmaDescIn->status.b.bytes = 0;
• gDmaDescIn->buf = 0;
• gDmaDescIn->status.b.sts = 0;
• gDmaDescIn->status.b.bs = 0x0;
• WRITE_REG32 (DIEPDMA (EndPoint), (UINT32)(UINTN)gDmaDescIn); // DMA Address (DMAAddr) is zero
• } else {
• WRITE_REG32 (DIEPTSIZ (EndPoint), Len | DXEPTSIZN_PKTCNT (Packets));
• //flush cache
• WriteBackDataCacheRange ((VOID *)Ptr, Len);
• gDmaDescIn->status.b.bs = 0x3;
• gDmaDescIn->status.b.l = 1;
• gDmaDescIn->status.b.ioc = 1;
• gDmaDescIn->status.b.sp = 1;
• gDmaDescIn->status.b.bytes = Len;
• gDmaDescIn->buf = (UINT32)(UINTN)Ptr;
• gDmaDescIn->status.b.sts = 0;
• gDmaDescIn->status.b.bs = 0x0;
• WRITE_REG32 (DIEPDMA (EndPoint), (UINT32)(UINTN)gDmaDescIn); // Ptr is DMA address
• }
• ArmDataSynchronizationBarrier ();
• /* epena & cnak */
• Data = READ_REG32 (DIEPCTL (EndPoint));
• WRITE_REG32 (DIEPCTL (EndPoint), Data | DXEPCTL_EPENA | DXEPCTL_CNAK | BIT11);

+}

+STATIC +VOID +EndPointRx (

• IN UINTN EndPoint,
• IN UINTN Len
• )

+{

• UINT32 Data;
• /* EPx UNSTALL */
• Data = READ_REG32 (DOEPCTL (EndPoint));
• WRITE_REG32 (DOEPCTL (EndPoint), Data & ~DXEPCTL_STALL);
• /* EPx OUT ACTIVE */
• Data = READ_REG32 (DOEPCTL (EndPoint));
• WRITE_REG32 (DOEPCTL (EndPoint), Data | DXEPCTL_USBACTEP);
• if (Len >= DATA_SIZE) {
• RxDescBytes = DATA_SIZE;
• } else {
• RxDescBytes = Len;
• }
• RxBuf = AllocatePool (DATA_SIZE);
• if (RxBuf == NULL) {
• DEBUG ((DEBUG_ERROR, "EndPointRx: failed to allocate buffer\n"));
• return;
• }
• InvalidateDataCacheRange (RxBuf, Len);
• gDmaDesc->status.b.bs = 0x3;
• gDmaDesc->status.b.mtrf = 0;
• gDmaDesc->status.b.sr = 0;
• gDmaDesc->status.b.l = 1;
• gDmaDesc->status.b.ioc = 1;
• gDmaDesc->status.b.sp = 0;
• gDmaDesc->status.b.bytes = (UINT32)RxDescBytes;
• gDmaDesc->buf = (UINT32)(UINTN)RxBuf;
• gDmaDesc->status.b.sts = 0;
• gDmaDesc->status.b.bs = 0x0;
• ArmDataSynchronizationBarrier ();
• WRITE_REG32 (DOEPDMA (EndPoint), (UINT32)(UINTN)gDmaDesc);
• /* EPx OUT ENABLE CLEARNAK */
• Data = READ_REG32 (DOEPCTL (EndPoint));
• WRITE_REG32 (DOEPCTL (EndPoint), Data | DXEPCTL_EPENA | DXEPCTL_CNAK);

+}

+STATIC +EFI_STATUS +HandleGetDescriptor (

• IN USB_DEVICE_REQUEST *Request
• )

+{

• UINTN ResponseSize;
• VOID *ResponseData;
• EFI_USB_STRING_DESCRIPTOR *Descriptor = NULL;
• UINTN DescriptorSize;
• ResponseSize = 0;
• ResponseData = NULL;
• // Pretty confused if bmRequestType is anything but this:
• if (Request->RequestType != USB_DEV_GET_DESCRIPTOR_REQ_TYPE) {
• return EFI_INVALID_PARAMETER;
• }
• // Choose the response
• switch (DESCRIPTOR_TYPE(Request->Value)) {
• case USB_DESC_TYPE_DEVICE:
• DEBUG ((DEBUG_INFO, "DwUsbDxe: Got a request for device descriptor\n"));
• ResponseSize = sizeof (USB_DEVICE_DESCRIPTOR);
• ResponseData = gDwUsbDescriptor.DeviceDescriptor;
• break;
• case USB_DESC_TYPE_CONFIG:
• DEBUG ((DEBUG_INFO, "DwUsbDxe: Got a request for config descriptor\n"));
• ResponseSize = gDwUsbDescriptor.ConfigDescriptor->TotalLength;
• ResponseData = gDwUsbDescriptor.ConfigDescriptor;
• break;
• case USB_DESC_TYPE_STRING:
• DEBUG ((DEBUG_INFO, "DwUsbDxe: Got a request for String descriptor %d\n", Request->Value & 0xFF));
• switch (DESCRIPTOR_INDEX(Request->Value)) {
• case 0:

•  DescriptorSize = sizeof (EFI_USB_STRING_DESCRIPTOR) +
  

•                   (LANG_LENGTH + 1) * sizeof (CHAR16);
  

•  Descriptor = (EFI_USB_STRING_DESCRIPTOR *)AllocateZeroPool (DescriptorSize);
  

•  if (Descriptor == NULL) {
  

•    return EFI_OUT_OF_RESOURCES;
  

•  }
  

•  Descriptor->Length = LANG_LENGTH * sizeof (CHAR16);
  

•  Descriptor->DescriptorType = USB_DESC_TYPE_STRING;
  

•  DwUsb->GetLang (Descriptor->String, &Descriptor->Length);
  

•  ResponseSize = Descriptor->Length;
  

•  ResponseData = Descriptor;
  

•  break;
  

• case 1:

•  DescriptorSize = sizeof (EFI_USB_STRING_DESCRIPTOR) +
  

•                   (MANU_FACTURER_STRING_LENGTH + 1) * sizeof (CHAR16);
  

•  Descriptor = (EFI_USB_STRING_DESCRIPTOR *)AllocateZeroPool (DescriptorSize);
  

•  if (Descriptor == NULL) {
  

•    return EFI_OUT_OF_RESOURCES;
  

•  }
  

•  Descriptor->Length = MANU_FACTURER_STRING_LENGTH * sizeof (CHAR16);
  

•  Descriptor->DescriptorType = USB_DESC_TYPE_STRING;
  

•  DwUsb->GetManuFacturer (Descriptor->String, &Descriptor->Length);
  

•  ResponseSize = Descriptor->Length;
  

•  ResponseData = Descriptor;
  

•  break;
  

• case 2:

•  DescriptorSize = sizeof (EFI_USB_STRING_DESCRIPTOR) +
  

•                   (PRODUCT_STRING_LENGTH + 1) * sizeof (CHAR16);
  

•  Descriptor = (EFI_USB_STRING_DESCRIPTOR *)AllocateZeroPool (DescriptorSize);
  

•  if (Descriptor == NULL) {
  

•    return EFI_OUT_OF_RESOURCES;
  

•  }
  

•  Descriptor->Length = PRODUCT_STRING_LENGTH * sizeof (CHAR16);
  

•  Descriptor->DescriptorType = USB_DESC_TYPE_STRING;
  

•  DwUsb->GetProduct (Descriptor->String, &Descriptor->Length);
  

•  ResponseSize = Descriptor->Length;
  

•  ResponseData = Descriptor;
  

•  break;
  

• case 3:

•  DescriptorSize = sizeof (EFI_USB_STRING_DESCRIPTOR) +
  

•                   SERIAL_STRING_LENGTH * sizeof (CHAR16) + 1;
  

•  Descriptor = (EFI_USB_STRING_DESCRIPTOR *)AllocateZeroPool (DescriptorSize);
  

•  if (Descriptor == NULL) {
  

•    return EFI_OUT_OF_RESOURCES;
  

•  }
  

•  Descriptor->Length = SERIAL_STRING_LENGTH * sizeof (CHAR16);
  

•  Descriptor->DescriptorType = USB_DESC_TYPE_STRING;
  

•  DwUsb->GetSerialNo (Descriptor->String, &Descriptor->Length);
  

•  ResponseSize = Descriptor->Length;
  

•  ResponseData = Descriptor;
  

•  break;
  

• }
• break;
• default:
• DEBUG ((DEBUG_INFO, "DwUsbDxe: Didn't understand request for descriptor 0x%04x\n", Request->Value));
• return EFI_INVALID_PARAMETER;
• }
• // Send the response
• if (Request->Length < ResponseSize) {
• // Truncate response
• ResponseSize = Request->Length;
• } else if (Request->Length > ResponseSize) {
• DEBUG ((DEBUG_INFO, "DwUsbDxe: Info: ResponseSize < wLength\n"));
• }
• EndPointTx (ENDPOINT0, ResponseData, ResponseSize);
• if (Descriptor) {
• FreePool (Descriptor);
• }
• return EFI_SUCCESS;

+}

+STATIC +EFI_STATUS +HandleSetAddress (

• IN USB_DEVICE_REQUEST *Request
• )

+{

• UINT32 Data;
• // Pretty confused if bmRequestType is anything but this:
• if (Request->RequestType != USB_DEV_SET_ADDRESS_REQ_TYPE) {
• return EFI_INVALID_PARAMETER;
• }
• DEBUG ((DEBUG_INFO, "DwUsbDxe: Setting address to %d\n", Request->Value));
• ResetEndpoints ();
• Data = READ_REG32 (DCFG);
• Data &= ~DCFG_DEVADDR_MASK;
• Data |= DCFG_DEVADDR (Request->Value);
• WRITE_REG32 (DCFG, Data);
• EndPointTx (ENDPOINT0, NULL, 0);
• return EFI_SUCCESS;

+}

+STATIC +VOID +UsbDrvRequestEndpoint (

• IN UINTN Type,
• IN UINTN Dir
• )

+{

• UINTN EndPoint = 1;
• UINTN NewBits;
• UINT32 Data;
• NewBits = DXEPCTL_EPTYPE (Type) | BIT28;
• /*
• • (Type << 18):Endpoint Type (EPType)
• • 0x10000000:Endpoint Enable (EPEna)
• • 0x000C000:Endpoint Type (EPType);Hardcoded to 00 for control.
• • (ep<<22):TxFIFO Number (TxFNum)
• • 0x20000:NAK Status (NAKSts);The core is transmitting NAK handshakes on this endpoint.
• */
• if (Dir == DIR_IN) { // IN: to host
• Data = READ_REG32 (DIEPCTL (EndPoint));
• Data &= ~DXEPCTL_EPTYPE_MASK;
• Data |= NewBits | DXEPCTL_TXFNUM (EndPoint) | DXEPCTL_NAKSTS;
• WRITE_REG32 (DIEPCTL (EndPoint), Data);
• } else { // OUT: to device
• Data = READ_REG32 (DOEPCTL (EndPoint));
• Data &= ~DXEPCTL_EPTYPE_MASK;
• Data |= NewBits;
• WRITE_REG32 (DOEPCTL (EndPoint), Data);
• }

+}

+STATIC +EFI_STATUS +HandleSetConfiguration (

• IN USB_DEVICE_REQUEST *Request
• )

+{

• UINT32 Data;
• if (Request->RequestType != USB_DEV_SET_CONFIGURATION_REQ_TYPE) {
• return EFI_INVALID_PARAMETER;
• }
• // Cancel all transfers
• ResetEndpoints ();
• UsbDrvRequestEndpoint (2, DIR_OUT);
• UsbDrvRequestEndpoint (2, DIR_IN);
• Data = READ_REG32 (DIEPCTL1);
• WRITE_REG32 (DIEPCTL1, Data | BIT28 | BIT19 | DXEPCTL_USBACTEP | BIT11);
• /* Enable interrupts on all endpoints */
• WRITE_REG32 (DAINTMSK, ~0);
• EndPointRx (ENDPOINT1, CMD_SIZE);
• EndPointTx (ENDPOINT0, NULL, 0);
• return EFI_SUCCESS;

+}

+STATIC +EFI_STATUS +HandleDeviceRequest (

• IN USB_DEVICE_REQUEST *Request
• )

+{

• EFI_STATUS Status;
• switch (Request->Request) {
• case USB_DEV_GET_DESCRIPTOR:
• Status = HandleGetDescriptor (Request);
• break;
• case USB_DEV_SET_ADDRESS:
• Status = HandleSetAddress (Request);
• break;
• case USB_DEV_SET_CONFIGURATION:
• Status = HandleSetConfiguration (Request);
• break;
• default:
• DEBUG ((DEBUG_ERROR,

•  "Didn't understand RequestType 0x%x Request 0x%x\n",
  

•  Request->RequestType, Request->Request));
  

•  Status = EFI_INVALID_PARAMETER;
  

• break;
• }
• return Status;

+}

+STATIC +VOID +HandleEndPointInEvent (

• VOID
• )

+{

• UINT32 EndPointInts;
• EndPointInts = READ_REG32 (DIEPINT0);
• WRITE_REG32 (DIEPINT0, EndPointInts);
• if (EndPointInts & DXEPINT_XFERCOMPL) {
• DEBUG ((DEBUG_INFO, "INT: IN TX completed.DIEPTSIZ (0) = 0x%x.\n", READ_REG32 (DIEPTSIZ0)));
• }
• EndPointInts = READ_REG32 (DIEPINT1);
• WRITE_REG32 (DIEPINT1, EndPointInts);
• if (EndPointInts & DXEPINT_XFERCOMPL) {
• DEBUG ((DEBUG_INFO, "ep1: IN TX completed\n"));
• }

+}

+STATIC +VOID +HandleEndPointOutEvent (

• VOID
• )

+{

• UINT32 EndPointInts;
• UINT32 Data;
• /* indicates the status of an endpoint
• • with respect to USB- and AHB-related events. */
• EndPointInts = READ_REG32 (DOEPINT0);
• if (EndPointInts) {
• WRITE_REG32 (DOEPINT0, EndPointInts);
• if (EndPointInts & DXEPINT_XFERCOMPL) {

•  DEBUG ((DEBUG_INFO, "INT: EP0 RX completed. DOEPTSIZ(0) = 0x%x.\n", READ_REG32 (DOEPTSIZ0)));
  

• }
• /*

• *
  

• IN Token Received When TxFIFO is Empty (INTknTXFEmp)
  

• * Indicates that an IN token was received when the associated TxFIFO (periodic/nonperiodic)
  

• * was empty. This interrupt is asserted on the endpoint for which the IN token
  

• * was received.
  

• */
  

• if (EndPointInts & BIT3) { /* SETUP phase done */

•  Data = READ_REG32 (DIEPCTL0) | DXEPCTL_SNAK;
  

•  WRITE_REG32 (DIEPCTL0, Data);
  

•  Data = READ_REG32 (DOEPCTL0) | DXEPCTL_SNAK;
  

•  WRITE_REG32 (DOEPCTL0, Data);
  

•  /*clear IN EP intr*/
  

•  WRITE_REG32 (DIEPINT0, ~0);
  

•  HandleDeviceRequest((USB_DEVICE_REQUEST *)gCtrlReq);
  

• }
• /* Make sure EP0 OUT is set up to accept the next request */
• WRITE_REG32 (DOEPTSIZ0, DXEPTSIZ_SUPCNT(3) | DXEPTSIZ_PKTCNT(1) | DXEPTSIZ_XFERSIZE(64));
• /*

• * IN Token Received When TxFIFO is Empty (INTknTXFEmp)
  

• * Indicates that an IN token was received when the associated TxFIFO (periodic/nonperiodic)
  

• * was empty. This interrupt is asserted on the endpoint for which the IN token
  

• * was received.
  

• */
  

• gDmaDescEp0->status.b.bs = 0x3;
• gDmaDescEp0->status.b.mtrf = 0;
• gDmaDescEp0->status.b.sr = 0;
• gDmaDescEp0->status.b.l = 1;
• gDmaDescEp0->status.b.ioc = 1;
• gDmaDescEp0->status.b.sp = 0;
• gDmaDescEp0->status.b.bytes = 64;
• gDmaDescEp0->buf = (UINT32)(UINTN)gCtrlReq;
• gDmaDescEp0->status.b.sts = 0;
• gDmaDescEp0->status.b.bs = 0x0;
• WRITE_REG32 (DOEPDMA0, (UINT32)(UINTN)gDmaDescEp0);
• // endpoint enable; clear NAK
• WRITE_REG32 (DOEPCTL0, DXEPCTL_EPENA | DXEPCTL_CNAK);
• }
• EndPointInts = (READ_REG32 (DOEPINT1));
• if (EndPointInts) {
• WRITE_REG32 (DOEPINT1, EndPointInts);
• /* Transfer Completed Interrupt (XferCompl);Transfer completed */
• if (EndPointInts & DXEPINT_XFERCOMPL) {

•  UINTN Bytes = RxDescBytes - gDmaDesc->status.b.bytes;
  

•  UINTN Len = 0;
  

•  ArmDataSynchronizationBarrier ();
  

•  if (MATCH_CMD_LITERAL ("download", RxBuf)) {
  

•    mNumDataBytes = AsciiStrHexToUint64 (RxBuf + sizeof ("download"));
  

•  } else {
  

•    if (mNumDataBytes != 0) {
  

•      mNumDataBytes -= Bytes;
  

•    }
  

•  }
  

•  mDataReceivedCallback (Bytes, RxBuf);
  

•  if (mNumDataBytes == 0) {
  

•    Len = CMD_SIZE;
  

•  } else if (mNumDataBytes > DATA_SIZE) {
  

•    Len = DATA_SIZE;
  

•  } else {
  

•    Len = mNumDataBytes;
  

•  }
  

•  EndPointRx (ENDPOINT1, Len);
  

• }
• }

+}

+// Instead of actually registering interrupt handlers, we poll the controller's +// interrupt source register in this function. +STATIC +VOID +CheckInterrupts (

• IN EFI_EVENT Event,
• IN VOID *Context
• )

+{

• UINT32 Ints;
• UINT32 Data;
• // interrupt register
• Ints = READ_REG32 (GINTSTS);
• /*
• • bus reset
• • The core sets this bit to indicate that a reset is detected on the USB.
• */
• if (Ints & GINTSTS_USBRST) {
• WRITE_REG32 (DCFG, DCFG_DESCDMA | DCFG_NZ_STS_OUT_HSHK);
• ResetEndpoints ();
• }
• /*
• • enumeration done, we now know the speed
• • The core sets this bit to indicate that speed enumeration is complete. The
• • application must read the Device Status (DSTS) register to obtain the
• • enumerated speed.
• */
• if (Ints & GINTSTS_ENUMDONE) {
• /* Set up the maximum packet sizes accordingly */
• UINTN MaxPacket = UsbDrvPortSpeed () ? USB_BLOCK_HIGH_SPEED_SIZE : MAX_PACKET_SIZE_CONTROL;
• //Set Maximum In Packet Size (MPS)
• Data = READ_REG32 (DIEPCTL1);
• Data &= ~DXEPCTL_MPS_MASK;
• Data |= MaxPacket;
• WRITE_REG32 (DIEPCTL1, Data);
• //Set Maximum Out Packet Size (MPS)
• Data = READ_REG32 (DOEPCTL1);
• Data &= ~DXEPCTL_MPS_MASK;
• Data |= MaxPacket;
• WRITE_REG32 (DOEPCTL1, Data);
• }
• /*
• • IN EP event
• • The core sets this bit to indicate that an interrupt is pending on one of the IN
• • endpoInts of the core (in Device mode). The application must read the
• • Device All EndpoInts Interrupt (DAINT) register to determine the exact
• • number of the IN endpoint on which the interrupt occurred, and then read
• • the corresponding Device IN Endpoint-n Interrupt (DIEPINTn) register to
• • determine the exact cause of the interrupt. The application must clear the
• • appropriate status bit in the corresponding DIEPINTn register to clear this bit.
• */
• if (Ints & GINTSTS_IEPINT) {
• HandleEndPointInEvent ();
• }
• /*
• • OUT EP event
• • The core sets this bit to indicate that an interrupt is pending on one of the
• • OUT endpoints of the core (in Device mode). The application must read the
• • Device All EndpoInts Interrupt (DAINT) register to determine the exact
• • number of the OUT endpoint on which the interrupt occurred, and then read
• • the corresponding Device OUT Endpoint-n Interrupt (DOEPINTn) register
• • to determine the exact cause of the interrupt. The application must clear the
• • appropriate status bit in the corresponding DOEPINTn register to clear this bit.
• */
• if (Ints & GINTSTS_OEPINT) {
• HandleEndPointOutEvent ();
• }
• // clear ints
• WRITE_REG32 (GINTSTS, Ints);

+}

+EFI_STATUS +DwUsbSend (

• IN UINT8 EndpointIndex,
• IN UINTN Size,
• IN CONST VOID *Buffer
• )

+{

• EndPointTx (EndpointIndex, Buffer, Size);
• return EFI_SUCCESS;

+}

+STATIC +VOID +DwUsbInit (

• VOID
• )

+{

• VOID *Buf;
• UINT32 Data;
• Buf = UncachedAllocatePages (DWUSB_BUFFER_PAGE_NUM);
• gDmaDesc = Buf;
• gDmaDescEp0 = gDmaDesc + sizeof (DwUsbDevDmaDesc);
• gDmaDescIn = gDmaDescEp0 + sizeof (DwUsbDevDmaDesc);
• gCtrlReq = (USB_DEVICE_REQUEST *)gDmaDescIn + sizeof (DwUsbDevDmaDesc);
• ZeroMem (Buf, EFI_PAGE_SIZE * DWUSB_BUFFER_PAGE_NUM);
• /*Reset usb controller.*/
• /* Wait for OTG AHB master idle */
• do {
• Data = READ_REG32 (GRSTCTL) & GRSTCTL_AHBIDLE;
• } while (Data == 0);
• /* OTG: Assert Software Reset */
• WRITE_REG32 (GRSTCTL, GRSTCTL_CSFTRST);
• /* Wait for OTG to ack reset */
• while ((READ_REG32 (GRSTCTL) & GRSTCTL_CSFTRST) == GRSTCTL_CSFTRST);
• /* Wait for OTG AHB master idle */
• while ((READ_REG32 (GRSTCTL) & GRSTCTL_AHBIDLE) == 0);
• WRITE_REG32 (GDFIFOCFG, DATA_FIFO_CONFIG);
• WRITE_REG32 (GRXFSIZ, RX_SIZE);
• WRITE_REG32 (GNPTXFSIZ, ENDPOINT_TX_SIZE);
• WRITE_REG32 (DIEPTXF1, DATA_IN_ENDPOINT_TX_FIFO1);
• WRITE_REG32 (DIEPTXF2, DATA_IN_ENDPOINT_TX_FIFO2);
• WRITE_REG32 (DIEPTXF3, DATA_IN_ENDPOINT_TX_FIFO3);
• WRITE_REG32 (DIEPTXF4, DATA_IN_ENDPOINT_TX_FIFO4);
• WRITE_REG32 (DIEPTXF5, DATA_IN_ENDPOINT_TX_FIFO5);
• WRITE_REG32 (DIEPTXF6, DATA_IN_ENDPOINT_TX_FIFO6);
• WRITE_REG32 (DIEPTXF7, DATA_IN_ENDPOINT_TX_FIFO7);
• WRITE_REG32 (DIEPTXF8, DATA_IN_ENDPOINT_TX_FIFO8);
• WRITE_REG32 (DIEPTXF9, DATA_IN_ENDPOINT_TX_FIFO9);
• WRITE_REG32 (DIEPTXF10, DATA_IN_ENDPOINT_TX_FIFO10);
• WRITE_REG32 (DIEPTXF11, DATA_IN_ENDPOINT_TX_FIFO11);
• WRITE_REG32 (DIEPTXF12, DATA_IN_ENDPOINT_TX_FIFO12);
• WRITE_REG32 (DIEPTXF13, DATA_IN_ENDPOINT_TX_FIFO13);
• WRITE_REG32 (DIEPTXF14, DATA_IN_ENDPOINT_TX_FIFO14);
• WRITE_REG32 (DIEPTXF15, DATA_IN_ENDPOINT_TX_FIFO15);
• /*
• • set Periodic TxFIFO Empty Level,
• • Non-Periodic TxFIFO Empty Level,
• • Enable DMA, Unmask Global Intr
• */
• WRITE_REG32 (GAHBCFG, GAHBCFG_CTRL_MASK);
• /*select 8bit UTMI+, ULPI Inerface*/
• WRITE_REG32 (GUSBCFG, GUSBCFG_USBTRDTIM_8BIT);
• /* Detect usb work mode,host or device? */
• do {
• Data = READ_REG32 (GINTSTS);
• } while (Data & GINTSTS_CURMODE_HOST);
• /*Init global and device mode csr register.*/
• /*set Non-Zero-Length status out handshake */
• Data = (0x20 << DCFG_EPMISCNT_SHIFT) | DCFG_NZ_STS_OUT_HSHK;
• WRITE_REG32 (DCFG, Data);
• /* Interrupt unmask: IN event, OUT event, bus reset */
• Data = GINTSTS_OEPINT | GINTSTS_IEPINT | GINTSTS_ENUMDONE | GINTSTS_USBRST;
• WRITE_REG32 (GINTMSK, Data);
• do {
• Data = READ_REG32 (GINTSTS) & GINTSTS_ENUMDONE;
• } while (Data);
• /* Clear any pending OTG Interrupts */
• WRITE_REG32 (GOTGINT, ~0);
• /* Clear any pending interrupts */
• WRITE_REG32 (GINTSTS, ~0);
• WRITE_REG32 (GINTMSK, ~0);
• Data = READ_REG32 (GOTGINT);
• Data &= ~0x3000; // unknown reserved bits
• WRITE_REG32 (GOTGINT, Data);
• /* endpoint settings cfg */
• ResetEndpoints ();
• /* wait for stable */
• MicroSecondDelay (1);
• /* init finish. and ready to transfer data */
• /* Soft Disconnect */
• WRITE_REG32 (DCTL, DCTL_PWRONPRGDONE | DCTL_SFTDISCON);
• /* wait for stable */
• MicroSecondDelay (10000);
• /* Soft Reconnect */
• WRITE_REG32 (DCTL, DCTL_PWRONPRGDONE);

+}

+EFI_STATUS +EFIAPI +DwUsbStart (

• IN USB_DEVICE_DESCRIPTOR *DeviceDescriptor,
• IN VOID **Descriptors,
• IN USB_DEVICE_RX_CALLBACK RxCallback,
• IN USB_DEVICE_TX_CALLBACK TxCallback
• )

+{

• EFI_STATUS Status;
• EFI_EVENT TimerEvent;
• if ((DeviceDescriptor == NULL) ||

•  (Descriptors[0] == NULL) ||
  

•  (RxCallback == NULL) ||
  

•  (TxCallback == NULL)) {
  

• return EFI_INVALID_PARAMETER;
• }
• DwUsbInit();
• gDwUsbDescriptor.DeviceDescriptor = DeviceDescriptor;
• // Right now we just support one configuration
• ASSERT (gDwUsbDescriptor.DeviceDescriptor->NumConfigurations == 1);
• gDwUsbDescriptor.DeviceDescriptor->StrManufacturer = DESCRIPTOR_INDEX_MANUFACTURER;
• gDwUsbDescriptor.DeviceDescriptor->StrProduct = DESCRIPTOR_INDEX_PRODUCT;
• gDwUsbDescriptor.DeviceDescriptor->StrSerialNumber = DESCRIPTOR_INDEX_SERIALNUMBER;
• // ... and one interface
• gDwUsbDescriptor.ConfigDescriptor = (USB_CONFIG_DESCRIPTOR *)Descriptors[0];
• ASSERT (gDwUsbDescriptor.ConfigDescriptor->NumInterfaces == 1);
• mDataReceivedCallback = RxCallback;
• mDataSentCallback = TxCallback;
• // Register a timer event so CheckInterupts gets called periodically
• Status = gBS->CreateEvent (

•              EVT_TIMER | EVT_NOTIFY_SIGNAL,
  

•              TPL_CALLBACK,
  

•              CheckInterrupts,
  

•              NULL,
  

•              &TimerEvent
  

•              );
  

• ASSERT_EFI_ERROR (Status);
• if (EFI_ERROR (Status)) {
• return Status;
• }
• Status = gBS->SetTimer (

•              TimerEvent,
  

•              TimerPeriodic,
  

•              DW_INTERRUPT_POLL_PERIOD
  

•              );
  

• ASSERT_EFI_ERROR (Status);
• return Status;

+}

+USB_DEVICE_PROTOCOL mUsbDevice = {

• DwUsbStart,
• DwUsbSend

+};

+EFI_STATUS +EFIAPI +DwUsbEntryPoint (

• IN EFI_HANDLE ImageHandle,
• IN EFI_SYSTEM_TABLE *SystemTable
• )

+{

• EFI_STATUS Status;
• Status = gBS->LocateProtocol (&gDwUsbProtocolGuid, NULL, (VOID **) &DwUsb);
• if (EFI_ERROR (Status)) {
• return Status;
• }
• Status = DwUsb->PhyInit(USB_DEVICE_MODE);
• if (EFI_ERROR (Status)) {
• return Status;
• }
• return gBS->InstallProtocolInterface (

•            &ImageHandle,
  

•            &gUsbDeviceProtocolGuid,
  

•            EFI_NATIVE_INTERFACE,
  

•            &mUsbDevice
  

•            );
  

+} diff --git a/Drivers/Usb/DwUsbDxe/DwUsbDxe.dec b/Drivers/Usb/DwUsbDxe/DwUsbDxe.dec new file mode 100644 index 0000000..d986798 --- /dev/null +++ b/Drivers/Usb/DwUsbDxe/DwUsbDxe.dec @@ -0,0 +1,45 @@ +#/** @file +# Framework Module Development Environment Industry Standards +# +# This Package provides headers and libraries that conform to EFI/PI Industry standards. +# Copyright (c) 2007, Intel Corporation. All rights reserved.<BR> +# Copyright (c) 2012-2014, ARM Ltd. All rights reserved.<BR> +# Copyright (c) 2015-2017, Linaro. All rights reserved.<BR> +# +# This program and the accompanying materials are licensed and made available under +# the terms and conditions of the BSD License which accompanies this distribution. +# The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +#**/

+[Defines]

• DEC_SPECIFICATION = 0x00010019
• PACKAGE_NAME = DwUsbDxePkg
• PACKAGE_GUID = 114a3be9-10f7-4bf1-81ca-09ac52d4c3d5
• PACKAGE_VERSION = 0.1

+################################################################################ +# +# Include Section - list of Include Paths that are provided by this package. +# Comments are used for Keywords and Module Types. +# +# Supported Module Types: +# BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION +# +################################################################################

+[Guids.common]

• gDwUsbDxeTokenSpaceGuid = { 0x131c4d02, 0x9449, 0x4ee9, { 0xba, 0x3d, 0x69, 0x50, 0x21, 0x89, 0x26, 0x0b }}

+[Protocols.common]

• gDwUsbProtocolGuid = { 0x109fa264, 0x7811, 0x4862, { 0xa9, 0x73, 0x4a, 0xb2, 0xef, 0x2e, 0xe2, 0xff }}

+[PcdsFixedAtBuild.common]

• # DwUsb Driver PCDs
• gDwUsbDxeTokenSpaceGuid.PcdDwUsbDxeBaseAddress|0x0|UINT32|0x00000001
• gDwUsbDxeTokenSpaceGuid.PcdSysCtrlBaseAddress|0x0|UINT32|0x00000002

diff --git a/Drivers/Usb/DwUsbDxe/DwUsbDxe.h b/Drivers/Usb/DwUsbDxe/DwUsbDxe.h new file mode 100644 index 0000000..775d5b3 --- /dev/null +++ b/Drivers/Usb/DwUsbDxe/DwUsbDxe.h @@ -0,0 +1,641 @@ +/** @file

• Copyright (c) 2015-2017, Linaro. All rights reserved.
• This program and the accompanying materials
• are licensed and made available under the terms and conditions of the BSD License
• which accompanies this distribution. The full text of the license may be found at
• http://opensource.org/licenses/bsd-license.php
• THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
• WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

+**/

+#ifndef __DW_USB_DXE_H__ +#define __DW_USB_DXE_H__

+#define DW_USB_BASE FixedPcdGet32 (PcdDwUsbDxeBaseAddress)

+#define READ_REG32(Offset) MmioRead32 (DW_USB_BASE + Offset) +#define READ_REG16(Offset) (UINT16)READ_REG32 (Offset) +#define WRITE_REG32(Offset, Val) MmioWrite32 (DW_USB_BASE + Offset, Val) +#define WRITE_REG16(Offset, Val) MmioWrite32 (DW_USB_BASE + Offset, (UINT32) Val) +#define WRITE_REG8(Offset, Val) MmioWrite32 (DW_USB_BASE + Offset, (UINT32) Val)

+// Max packet size in bytes (For Full Speed USB 64 is the only valid value) +#define MAX_PACKET_SIZE_CONTROL 64

+#define MAX_PACKET_SIZE_BULK 512

+// 8 Endpoints, in and out. Don't count the Endpoint 0 setup buffer +#define DW_NUM_ENDPOINTS 16

+// Endpoint Indexes +#define DW_EP0SETUP 0x20 +#define DW_EP0RX 0x00 +#define DW_EP0TX 0x01 +#define DW_EP1RX 0x02 +#define DW_EP1TX 0x03

+// DcInterrupt bits +#define DW_DC_INTERRUPT_EP1TX BIT13 +#define DW_DC_INTERRUPT_EP1RX BIT12 +#define DW_DC_INTERRUPT_EP0TX BIT11 +#define DW_DC_INTERRUPT_EP0RX BIT10 +#define DW_DC_INTERRUPT_EP0SETUP BIT8 +#define DW_DC_INTERRUPT_VBUS BIT7 +#define DW_DC_INTERRUPT_DMA BIT6 +#define DW_DC_INTERRUPT_HS_STAT BIT5 +#define DW_DC_INTERRUPT_RESUME BIT4 +#define DW_DC_INTERRUPT_SUSP BIT3 +#define DW_DC_INTERRUPT_PSOF BIT2 +#define DW_DC_INTERRUPT_SOF BIT1 +#define DW_DC_INTERRUPT_BRESET BIT0 +// All valid peripheral controller int rrupts +#define DW_DC_INTERRUPT_MASK 0x003FFFDFF

+#define DW_ADDRESS 0x200 +#define DW_ADDRESS_DEVEN BIT7

+#define DW_MODE 0x20C +#define DW_MODE_DATA_BUS_WIDTH BIT8 +#define DW_MODE_CLKAON BIT7 +#define DW_MODE_SFRESET BIT4 +#define DW_MODE_WKUPCS BIT2

+#define DW_ENDPOINT_MAX_PACKET_SIZE 0x204

+#define DW_ENDPOINT_TYPE 0x208 +#define DW_ENDPOINT_TYPE_NOEMPKT BIT4 +#define DW_ENDPOINT_TYPE_ENABLE BIT3

+#define DW_INTERRUPT_CONFIG 0x210 +// Interrupt config value to only interrupt on ACK of IN and OUT tokens +#define DW_INTERRUPT_CONFIG_ACK_ONLY (BIT2 | BIT5 | BIT6)

+#define DW_DC_INTERRUPT 0x218 +#define DW_DC_INTERRUPT_ENABLE 0x214

+#define DW_CTRL_FUNCTION 0x228 +#define DW_CTRL_FUNCTION_VENDP BIT3 +#define DW_CTRL_FUNCTION_DSEN BIT2 +#define DW_CTRL_FUNCTION_STATUS BIT1

+#define DW_DEVICE_UNLOCK 0x27C +#define DW_DEVICE_UNLOCK_MAGIC 0xAA37

+#define DW_SW_RESET_REG 0x30C +#define DW_SW_RESET_ALL BIT0

+#define DW_DEVICE_ID 0x370

+#define DW_OTG_CTRL_SET 0x374 +#define DW_OTG_CTRL_CLR (OTG_CTRL_SET + 2) +#define DW_OTG_CTRL_OTG_DISABLE BIT10 +#define DW_OTG_CTRL_VBUS_CHRG BIT6 +#define DW_OTG_CTRL_VBUS_DISCHRG BIT5 +#define DW_OTG_CTRL_DM_PULLDOWN BIT2 +#define DW_OTG_CTRL_DP_PULLDOWN BIT1 +#define DW_OTG_CTRL_DP_PULLUP BIT0

+#define DW_OTG_STATUS 0x378 +#define DW_OTG_STATUS_B_SESS_END BIT7 +#define DW_OTG_STATUS_A_B_SESS_VLD BIT1

+#define DW_OTG_INTERRUPT_LATCH_SET 0x37C +#define DW_OTG_INTERRUPT_LATCH_CLR 0x37E +#define DW_OTG_INTERRUPT_ENABLE_RISE 0x384

+#define DW_DMA_ENDPOINT_INDEX 0x258

+#define DW_ENDPOINT_INDEX 0x22c +#define DW_DATA_PORT 0x220 +#define DW_BUFFER_LENGTH 0x21c

+// Device ID Values +#define PHILLIPS_VENDOR_ID_VAL 0x04cc +#define DW_PRODUCT_ID_VAL 0x1761 +#define DW_DEVICE_ID_VAL ((ISP1761_PRODUCT_ID_VAL << 16) | \

•                                     PHILLIPS_VENDOR_ID_VAL)
  

+#define DWC_OTG_BASE DW_USB_BASE

+#define USB_NUM_ENDPOINTS 2 +#define MAX_EPS_CHANNELS 16

+#define BULK_OUT_EP 1 +#define BULK_IN_EP 1

+#define RX_REQ_LEN 512 +#define MAX_PACKET_LEN 512

+#define DATA_FIFO_CONFIG 0x0F801000 +/* RX FIFO: 2048 bytes */ +#define RX_SIZE 0x00000200 +/* Non-periodic TX FIFO: 128 bytes. start address: 0x200 * 4. */ +#define ENDPOINT_TX_SIZE 0x01000200

+/* EP1 TX FIFO: 1024 bytes. start address: 0x220 * 4. */ +/* EP2 TX FIFO: 1024 bytes. start address: 0x320 * 4. */ +/* EP3 TX FIFO: 1024 bytes. start address: 0x420 * 4. */ +/* EP4 TX FIFO: 1024 bytes. start address: 0x520 * 4. */ +/* EP5 TX FIFO: 128 bytes. start address: 0x620 * 4. */ +/* EP6 TX FIFO: 128 bytes. start address: 0x640 * 4. */ +/* EP7 TX FIFO: 128 bytes. start address: 0x660 * 4. */ +/* EP8 TX FIFO: 128 bytes. start address: 0x680 * 4. */ +/* EP9 TX FIFO: 128 bytes. start address: 0x6A0 * 4. */ +/* EP10 TX FIFO: 128 bytes. start address: 0x6C0 * 4. */ +/* EP11 TX FIFO: 128 bytes. start address: 0x6E0 * 4. */ +/* EP12 TX FIFO: 128 bytes. start address: 0x700 * 4. */ +/* EP13 TX FIFO: 128 bytes. start address: 0x720 * 4. */ +/* EP14 TX FIFO: 128 bytes. start address: 0x740 * 4. */ +/* EP15 TX FIFO: 128 bytes. start address: 0x760 * 4. */

+#define DATA_IN_ENDPOINT_TX_FIFO1 0x01000220 +#define DATA_IN_ENDPOINT_TX_FIFO2 0x01000320 +#define DATA_IN_ENDPOINT_TX_FIFO3 0x01000420 +#define DATA_IN_ENDPOINT_TX_FIFO4 0x01000520 +#define DATA_IN_ENDPOINT_TX_FIFO5 0x00200620 +#define DATA_IN_ENDPOINT_TX_FIFO6 0x00200640 +#define DATA_IN_ENDPOINT_TX_FIFO7 0x00200680 +#define DATA_IN_ENDPOINT_TX_FIFO8 0x002006A0 +#define DATA_IN_ENDPOINT_TX_FIFO9 0x002006C0 +#define DATA_IN_ENDPOINT_TX_FIFO10 0x002006E0 +#define DATA_IN_ENDPOINT_TX_FIFO11 0x00200700 +#define DATA_IN_ENDPOINT_TX_FIFO12 0x00200720 +#define DATA_IN_ENDPOINT_TX_FIFO13 0x00200740 +#define DATA_IN_ENDPOINT_TX_FIFO14 0x00200760 +#define DATA_IN_ENDPOINT_TX_FIFO15 0x00200F00

+/*DWC_OTG regsiter descriptor*/ +/*Device mode CSR MAP*/ +#define DEVICE_CSR_BASE 0x800 +/*Device mode CSR MAP*/ +#define DEVICE_INEP_BASE 0x900 +/*Device mode CSR MAP*/ +#define DEVICE_OUTEP_BASE 0xB00

+/*** OTG LINK CORE REGISTERS ***/ +/* Core Global Registers */ +#define GOTGCTL 0x000 +#define GOTGINT 0x004 +#define GAHBCFG 0x008 +#define GAHBCFG_P_TXF_EMP_LVL (1 << 8) +#define GAHBCFG_NP_TXF_EMP_LVL (1 << 7) +#define GAHBCFG_DMA_EN (1 << 5) +#define GAHBCFG_GLBL_INTR_EN (1 << 0) +#define GAHBCFG_CTRL_MASK (GAHBCFG_P_TXF_EMP_LVL | \

•                                     GAHBCFG_NP_TXF_EMP_LVL | \
  

•                                     GAHBCFG_DMA_EN | \
  

•                                     GAHBCFG_GLBL_INTR_EN)
  

+#define GUSBCFG 0x00C +#define GUSBCFG_USBTRDTIM_8BIT (0x9 << 10) +#define GUSBCFG_USBTRDTIM_16BIT (0x5 << 10)

+#define GRSTCTL 0x010 +#define GRSTCTL_AHBIDLE (1 << 31) +#define GRSTCTL_CSFTRST (1 << 0)

+#define GINTSTS 0x014 +#define GINTSTS_WKUPINT BIT31 +#define GINTSTS_SESSREGINT BIT30 +#define GINTSTS_DISCONNINT BIT29 +#define GINTSTS_CONIDSTSCHNG BIT28 +#define GINTSTS_LPMTRANRCVD BIT27 +#define GINTSTS_PTXFEMP BIT26 +#define GINTSTS_HCHINT BIT25 +#define GINTSTS_PRTINT BIT24 +#define GINTSTS_RESETDET BIT23 +#define GINTSTS_FET_SUSP BIT22 +#define GINTSTS_INCOMPL_IP BIT21 +#define GINTSTS_INCOMPL_SOIN BIT20 +#define GINTSTS_OEPINT BIT19 +#define GINTSTS_IEPINT BIT18 +#define GINTSTS_EPMIS BIT17 +#define GINTSTS_RESTOREDONE BIT16 +#define GINTSTS_EOPF BIT15 +#define GINTSTS_ISOUTDROP BIT14 +#define GINTSTS_ENUMDONE BIT13 +#define GINTSTS_USBRST BIT12 +#define GINTSTS_USBSUSP BIT11 +#define GINTSTS_ERLYSUSP BIT10 +#define GINTSTS_I2CINT BIT9 +#define GINTSTS_ULPI_CK_INT BIT8 +#define GINTSTS_GOUTNAKEFF BIT7 +#define GINTSTS_GINNAKEFF BIT6 +#define GINTSTS_NPTXFEMP BIT5 +#define GINTSTS_RXFLVL BIT4 +#define GINTSTS_SOF BIT3 +#define GINTSTS_OTGINT BIT2 +#define GINTSTS_MODEMIS BIT1 +#define GINTSTS_CURMODE_HOST BIT0

+#define GINTMSK 0x018 +#define GRXSTSR 0x01C +#define GRXSTSP 0x020 +#define GRXFSIZ 0x024 +#define GNPTXFSIZ 0x028 +#define GNPTXSTS 0x02C

+#define GHWCFG1 0x044 +#define GHWCFG2 0x048 +#define GHWCFG3 0x04c +#define GHWCFG4 0x050 +#define GLPMCFG 0x054

+#define GDFIFOCFG 0x05c

+#define HPTXFSIZ 0x100 +#define DIEPTXF(x) (0x100 + 4 * (x)) +#define DIEPTXF1 0x104 +#define DIEPTXF2 0x108 +#define DIEPTXF3 0x10C +#define DIEPTXF4 0x110 +#define DIEPTXF5 0x114 +#define DIEPTXF6 0x118 +#define DIEPTXF7 0x11C +#define DIEPTXF8 0x120 +#define DIEPTXF9 0x124 +#define DIEPTXF10 0x128 +#define DIEPTXF11 0x12C +#define DIEPTXF12 0x130 +#define DIEPTXF13 0x134 +#define DIEPTXF14 0x138 +#define DIEPTXF15 0x13C

+/*** HOST MODE REGISTERS ***/ +/* Host Global Registers */ +#define HCFG 0x400 +#define HFIR 0x404 +#define HFNUM 0x408 +#define HPTXSTS 0x410 +#define HAINT 0x414 +#define HAINTMSK 0x418

+/* Host Port Control and Status Registers */ +#define HPRT 0x440

+/* Host Channel-Specific Registers */ +#define HCCHAR(x) (0x500 + 0x20 * (x)) +#define HCSPLT(x) (0x504 + 0x20 * (x)) +#define HCINT(x) (0x508 + 0x20 * (x)) +#define HCINTMSK(x) (0x50C + 0x20 * (x)) +#define HCTSIZ(x) (0x510 + 0x20 * (x)) +#define HCDMA(x) (0x514 + 0x20 * (x)) +#define HCCHAR0 0x500 +#define HCSPLT0 0x504 +#define HCINT0 0x508 +#define HCINTMSK0 0x50C +#define HCTSIZ0 0x510 +#define HCDMA0 0x514 +#define HCCHAR1 0x520 +#define HCSPLT1 0x524 +#define HCINT1 0x528 +#define HCINTMSK1 0x52C +#define HCTSIZ1 0x530 +#define HCDMA1 0x534 +#define HCCHAR2 0x540 +#define HCSPLT2 0x544 +#define HCINT2 0x548 +#define HCINTMSK2 0x54C +#define HCTSIZ2 0x550 +#define HCDMA2 0x554 +#define HCCHAR3 0x560 +#define HCSPLT3 0x564 +#define HCINT3 0x568 +#define HCINTMSK3 0x56C +#define HCTSIZ3 0x570 +#define HCDMA3 0x574 +#define HCCHAR4 0x580 +#define HCSPLT4 0x584 +#define HCINT4 0x588 +#define HCINTMSK4 0x58C +#define HCTSIZ4 0x590 +#define HCDMA4 0x594 +#define HCCHAR5 0x5A0 +#define HCSPLT5 0x5A4 +#define HCINT5 0x5A8 +#define HCINTMSK5 0x5AC +#define HCTSIZ5 0x5B0 +#define HCDMA5 0x5B4 +#define HCCHAR6 0x5C0 +#define HCSPLT6 0x5C4 +#define HCINT6 0x5C8 +#define HCINTMSK6 0x5CC +#define HCTSIZ6 0x5D0 +#define HCDMA6 0x5D4 +#define HCCHAR7 0x5E0 +#define HCSPLT7 0x5E4 +#define HCINT7 0x5E8 +#define HCINTMSK7 0x5EC +#define HCTSIZ7 0x5F0 +#define HCDMA7 0x5F4 +#define HCCHAR8 0x600 +#define HCSPLT8 0x604 +#define HCINT8 0x608 +#define HCINTMSK8 0x60C +#define HCTSIZ8 0x610 +#define HCDMA8 0x614 +#define HCCHAR9 0x620 +#define HCSPLT9 0x624 +#define HCINT9 0x628 +#define HCINTMSK9 0x62C +#define HCTSIZ9 0x630 +#define HCDMA9 0x634 +#define HCCHAR10 0x640 +#define HCSPLT10 0x644 +#define HCINT10 0x648 +#define HCINTMSK10 0x64C +#define HCTSIZ10 0x650 +#define HCDMA10 0x654 +#define HCCHAR11 0x660 +#define HCSPLT11 0x664 +#define HCINT11 0x668 +#define HCINTMSK11 0x66C +#define HCTSIZ11 0x670 +#define HCDMA11 0x674 +#define HCCHAR12 0x680 +#define HCSPLT12 0x684 +#define HCINT12 0x688 +#define HCINTMSK12 0x68C +#define HCTSIZ12 0x690 +#define HCDMA12 0x694 +#define HCCHAR13 0x6A0 +#define HCSPLT13 0x6A4 +#define HCINT13 0x6A8 +#define HCINTMSK13 0x6AC +#define HCTSIZ13 0x6B0 +#define HCDMA13 0x6B4 +#define HCCHAR14 0x6C0 +#define HCSPLT14 0x6C4 +#define HCINT14 0x6C8 +#define HCINTMSK14 0x6CC +#define HCTSIZ14 0x6D0 +#define HCDMA14 0x6D4 +#define HCCHAR15 0x6E0 +#define HCSPLT15 0x6E4 +#define HCINT15 0x6E8 +#define HCINTMSK15 0x6EC +#define HCTSIZ15 0x6F0 +#define HCDMA15 0x6F4

+/*** DEVICE MODE REGISTERS ***/ +/* Device Global Registers */ +#define DCFG 0x800 +#define DCFG_DESCDMA BIT23 +#define DCFG_EPMISCNT_MASK (0x1F << 18) +#define DCFG_EPMISCNT_SHIFT 18 +#define DCFG_DEVADDR_MASK (0x7F << 4) +#define DCFG_DEVADDR_SHIFT 4 +#define DCFG_DEVADDR(x) (((x) << DCFG_DEVADDR_SHIFT) & DCFG_DEVADDR_MASK) +#define DCFG_NZ_STS_OUT_HSHK BIT2

+#define DCTL 0x804 +#define DCTL_PWRONPRGDONE BIT11 +#define DCTL_GNPINNAKSTS BIT2 +#define DCTL_SFTDISCON BIT1

+#define DSTS 0x808 +#define DSTS_ENUMSPD_MASK (0x3 << 1) +#define DSTS_ENUMSPD_HIGH (0 << 1) +#define DSTS_ENUMSPD_FULL (1 << 1)

+#define DIEPMSK 0x810 +#define DOEPMSK 0x814

+#define DXEPMSK_TIMEOUTMSK BIT3 +#define DXEPMSK_AHBERMSK BIT2 +#define DXEPMSK_XFERCOMPLMSK BIT0

+#define DAINT 0x818 +#define DAINTMSK 0x81C

+#define DAINTMSK_OUTEPMSK_SHIFT 16 +#define DAINTMSK_INEPMSK_SHIFT 0

+#define DTKNQR1 0x820 +#define DTKNQR2 0x824 +#define DVBUSDIS 0x828 +#define DVBUSPULSE 0x82C +#define DTHRCTL 0x830

+/* Device Logical IN Endpoint-Specific Registers */ +#define DIEPCTL(x) (0x900 + 0x20 * (x)) +#define DIEPINT(x) (0x908 + 0x20 * (x)) +#define DIEPTSIZ(x) (0x910 + 0x20 * (x)) +#define DIEPDMA(x) (0x914 + 0x20 * (x)) +#define DTXFSTS(x) (0x918 + 0x20 * (x))

+#define DIEPCTL0 0x900 +#define DIEPINT0 0x908 +#define DIEPTSIZ0 0x910 +#define DIEPDMA0 0x914 +#define DIEPCTL1 0x920 +#define DIEPINT1 0x928 +#define DIEPTSIZ1 0x930 +#define DIEPDMA1 0x934 +#define DIEPCTL2 0x940 +#define DIEPINT2 0x948 +#define DIEPTSIZ2 0x950 +#define DIEPDMA2 0x954 +#define DIEPCTL3 0x960 +#define DIEPINT3 0x968 +#define DIEPTSIZ3 0x970 +#define DIEPDMA3 0x974 +#define DIEPCTL4 0x980 +#define DIEPINT4 0x988 +#define DIEPTSIZ4 0x990 +#define DIEPDMA4 0x994 +#define DIEPCTL5 0x9A0 +#define DIEPINT5 0x9A8 +#define DIEPTSIZ5 0x9B0 +#define DIEPDMA5 0x9B4 +#define DIEPCTL6 0x9C0 +#define DIEPINT6 0x9C8 +#define DIEPTSIZ6 0x9D0 +#define DIEPDMA6 0x9D4 +#define DIEPCTL7 0x9E0 +#define DIEPINT7 0x9E8 +#define DIEPTSIZ7 0x9F0 +#define DIEPDMA7 0x9F4 +#define DIEPCTL8 0xA00 +#define DIEPINT8 0xA08 +#define DIEPTSIZ8 0xA10 +#define DIEPDMA8 0xA14 +#define DIEPCTL9 0xA20 +#define DIEPINT9 0xA28 +#define DIEPTSIZ9 0xA30 +#define DIEPDMA9 0xA34 +#define DIEPCTL10 0xA40 +#define DIEPINT10 0xA48 +#define DIEPTSIZ10 0xA50 +#define DIEPDMA10 0xA54 +#define DIEPCTL11 0xA60 +#define DIEPINT11 0xA68 +#define DIEPTSIZ11 0xA70 +#define DIEPDMA11 0xA74 +#define DIEPCTL12 0xA80 +#define DIEPINT12 0xA88 +#define DIEPTSIZ12 0xA90 +#define DIEPDMA12 0xA94 +#define DIEPCTL13 0xAA0 +#define DIEPINT13 0xAA8 +#define DIEPTSIZ13 0xAB0 +#define DIEPDMA13 0xAB4 +#define DIEPCTL14 0xAC0 +#define DIEPINT14 0xAC8 +#define DIEPTSIZ14 0xAD0 +#define DIEPDMA14 0xAD4 +#define DIEPCTL15 0xAE0 +#define DIEPINT15 0xAE8 +#define DIEPTSIZ15 0xAF0 +#define DIEPDMA15 0xAF4

+/* Device Logical OUT Endpoint-Specific Registers */ +#define DOEPCTL(x) (0xB00 + 0x20 * (x)) +#define DOEPINT(x) (0xB08 + 0x20 * (x)) +#define DOEPTSIZ(x) (0xB10 + 0x20 * (x))

+#define DXEPINT_EPDISBLD BIT1 +#define DXEPINT_XFERCOMPL BIT0

+#define DXEPTSIZ_SUPCNT(x) (((x) & 0x3) << 29) +#define DXEPTSIZ_PKTCNT(x) (((x) & 0x3) << 19) +#define DXEPTSIZ_XFERSIZE(x) ((x) & 0x7F)

+#define DOEPDMA(x) (0xB14 + 0x20 * (x)) +#define DOEPCTL0 0xB00 +#define DOEPINT0 0xB08 +#define DOEPTSIZ0 0xB10 +#define DOEPDMA0 0xB14 +#define DOEPCTL1 0xB20 +#define DOEPINT1 0xB28 +#define DOEPTSIZ1 0xB30 +#define DOEPDMA1 0xB34 +#define DOEPCTL2 0xB40 +#define DOEPINT2 0xB48 +#define DOEPTSIZ2 0xB50 +#define DOEPDMA2 0xB54 +#define DOEPCTL3 0xB60 +#define DOEPINT3 0xB68 +#define DOEPTSIZ3 0xB70 +#define DOEPDMA3 0xB74 +#define DOEPCTL4 0xB80 +#define DOEPINT4 0xB88 +#define DOEPTSIZ4 0xB90 +#define DOEPDMA4 0xB94 +#define DOEPCTL5 0xBA0 +#define DOEPINT5 0xBA8 +#define DOEPTSIZ5 0xBB0 +#define DOEPDMA5 0xBB4 +#define DOEPCTL6 0xBC0 +#define DOEPINT6 0xBC8 +#define DOEPTSIZ6 0xBD0 +#define DOEPDMA6 0xBD4 +#define DOEPCTL7 0xBE0 +#define DOEPINT7 0xBE8 +#define DOEPTSIZ7 0xBF0 +#define DOEPDMA7 0xBF4 +#define DOEPCTL8 0xC00 +#define DOEPINT8 0xC08 +#define DOEPTSIZ8 0xC10 +#define DOEPDMA8 0xC14 +#define DOEPCTL9 0xC20 +#define DOEPINT9 0xC28 +#define DOEPTSIZ9 0xC30 +#define DOEPDMA9 0xC34 +#define DOEPCTL10 0xC40 +#define DOEPINT10 0xC48 +#define DOEPTSIZ10 0xC50 +#define DOEPDMA10 0xC54 +#define DOEPCTL11 0xC60 +#define DOEPINT11 0xC68 +#define DOEPTSIZ11 0xC70 +#define DOEPDMA11 0xC74 +#define DOEPCTL12 0xC80 +#define DOEPINT12 0xC88 +#define DOEPTSIZ12 0xC90 +#define DOEPDMA12 0xC94 +#define DOEPCTL13 0xCA0 +#define DOEPINT13 0xCA8 +#define DOEPTSIZ13 0xCB0 +#define DOEPDMA13 0xCB4 +#define DOEPCTL14 0xCC0 +#define DOEPINT14 0xCC8 +#define DOEPTSIZ14 0xCD0 +#define DOEPDMA14 0xCD4 +#define DOEPCTL15 0xCE0 +#define DOEPINT15 0xCE8 +#define DOEPTSIZ15 0xCF0 +#define DOEPDMA15 0xCF4

+#define DXEPCTL_EPENA BIT31 +#define DXEPCTL_SNAK BIT27 +#define DXEPCTL_CNAK BIT26 +#define DXEPCTL_TXFNUM(x) (((x) & 0xF) << 22) +#define DXEPCTL_STALL BIT21 +#define DXEPCTL_EPTYPE_MASK (BIT19 | BIT18) +#define DXEPCTL_EPTYPE(x) (((x) & 0x3) << 18) +#define DXEPCTL_NAKSTS BIT17 +#define DXEPCTL_USBACTEP BIT15 +#define DXEPCTL_MPS_MASK 0x7FF

+#define DXEPTSIZN_PKTCNT_MASK (0x3FF << 19) +#define DXEPTSIZN_PKTCNT(x) (((x) & 0x3FF) << 19) +#define DXEPTSIZN_XFERSIZE_MASK 0x7FFFF +#define DXEPTSIZN_XFERSIZE(x) ((x) & 0x7FFFF)

+/* Power and Clock Gating Register */ +#define PCGCCTL 0xE00

+#define EP0FIFO 0x1000

+/**

• • This union represents the bit fields in the DMA Descriptor
• • status quadlet. Read the quadlet into the <i>d32</i> member then
• • set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
• • <i>b_iso_in</i> elements.
• */

+typedef union {

• /** raw register data */
• UINT32 d32;
• /** quadlet bits */
• struct {
• /** Received number of bytes */
• unsigned bytes:16;
• /** NAK bit - only for OUT EPs */
• unsigned nak:1;
• unsigned reserved17_22:6;
• /** Multiple Transfer - only for OUT EPs */
• unsigned mtrf:1;
• /** Setup Packet received - only for OUT EPs */
• unsigned sr:1;
• /** Interrupt On Complete */
• unsigned ioc:1;
• /** Short Packet */
• unsigned sp:1;
• /** Last */
• unsigned l:1;
• /** Receive Status */
• unsigned sts:2;
• /** Buffer Status */
• unsigned bs:2;
• } b;

+} DevDmaDescStatus;

+/**

• • DMA Descriptor structure
• • DMA Descriptor structure contains two quadlets:
• • Status quadlet and Data buffer pointer.
• */

+typedef struct {

• /** DMA Descriptor status quadlet */
• DevDmaDescStatus status;
• /** DMA Descriptor data buffer pointer */
• UINT32 buf;

+} DwUsbDevDmaDesc;

+#endif //ifndef __DW_USB_DXE_H__ diff --git a/Drivers/Usb/DwUsbDxe/DwUsbDxe.inf b/Drivers/Usb/DwUsbDxe/DwUsbDxe.inf new file mode 100644 index 0000000..989c6a4 --- /dev/null +++ b/Drivers/Usb/DwUsbDxe/DwUsbDxe.inf @@ -0,0 +1,52 @@ +#/** @file +# +# Copyright (c) 2015-2017, Linaro. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# +#**/

+[Defines]

• INF_VERSION = 0x00010019
• BASE_NAME = DwUsbDxe
• FILE_GUID = 72d78ea6-4dee-11e3-8100-f3842a48d0a0
• MODULE_TYPE = UEFI_DRIVER
• VERSION_STRING = 1.0
• ENTRY_POINT = DwUsbEntryPoint

+[Sources.common]

• DwUsbDxe.c

+[LibraryClasses]

• ArmLib
• CacheMaintenanceLib
• DebugLib
• IoLib
• MemoryAllocationLib
• TimerLib
• UncachedMemoryAllocationLib
• UefiBootServicesTableLib
• UefiDriverEntryPoint

+[Protocols]

• gEfiDriverBindingProtocolGuid
• gUsbDeviceProtocolGuid

+[Packages]

• ArmPkg/ArmPkg.dec
• EmbeddedPkg/EmbeddedPkg.dec
• MdeModulePkg/MdeModulePkg.dec
• MdePkg/MdePkg.dec
• OpenPlatformPkg/Drivers/Usb/DwUsbDxe/DwUsbDxe.dec

+[Pcd]

• gDwUsbDxeTokenSpaceGuid.PcdDwUsbDxeBaseAddress

+[Depex]

• TRUE

diff --git a/Include/Protocol/DwUsb.h b/Include/Protocol/DwUsb.h new file mode 100644 index 0000000..040e126 --- /dev/null +++ b/Include/Protocol/DwUsb.h @@ -0,0 +1,81 @@ +/** @file

• Copyright (c) 2015-2017, Linaro. All rights reserved.
• This program and the accompanying materials
• are licensed and made available under the terms and conditions of the BSD License
• which accompanies this distribution. The full text of the license may be found at
• http://opensource.org/licenses/bsd-license.php
• THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
• WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

+**/

+#ifndef __DW_USB_H__ +#define __DW_USB_H__

+// +// Protocol GUID +// +#define DW_USB_PROTOCOL_GUID { 0x109fa264, 0x7811, 0x4862, { 0xa9, 0x73, 0x4a, 0xb2, 0xef, 0x2e, 0xe2, 0xff }}

+// +// Protocol interface structure +// +typedef struct _DW_USB_PROTOCOL DW_USB_PROTOCOL;

+#define USB_HOST_MODE 0 +#define USB_DEVICE_MODE 1 +#define USB_CABLE_NOT_ATTACHED 2

+#define LANG_LENGTH 8 +#define MANU_FACTURER_STRING_LENGTH 32 +#define PRODUCT_STRING_LENGTH 32 +#define SERIAL_STRING_LENGTH 17

+typedef +EFI_STATUS +(EFIAPI *DW_USB_GET_LANG) (

• OUT CHAR16 *Lang,
• OUT UINT8 *Length
• );

+typedef +EFI_STATUS +(EFIAPI *DW_USB_GET_MANU_FACTURER) (

• OUT CHAR16 *ManuFacturer,
• OUT UINT8 *Length
• );

+typedef +EFI_STATUS +(EFIAPI *DW_USB_GET_PRODUCT) (

• OUT CHAR16 *Product,
• OUT UINT8 *Length
• );

+typedef +EFI_STATUS +(EFIAPI *DW_USB_GET_SERIAL_NO) (

• OUT CHAR16 *SerialNo,
• OUT UINT8 *Length
• );

+typedef +EFI_STATUS +(EFIAPI *DW_USB_PHY_INIT) (

• IN UINT8 Mode
• );

+struct _DW_USB_PROTOCOL {

• DW_USB_GET_LANG GetLang;
• DW_USB_GET_MANU_FACTURER GetManuFacturer;
• DW_USB_GET_PRODUCT GetProduct;
• DW_USB_GET_SERIAL_NO GetSerialNo;
• DW_USB_PHY_INIT PhyInit;

+};

+extern EFI_GUID gDwUsbProtocolGuid;

+#endif

2.7.4